Breakage and damage of fiber optic cable fibers seriously affect the normal operation of fiber optic networks and it is important to quickly and accurately determine the type and location of faults when they occur. The advantages of wavelet transform in singular signal detection and signal filtering are used to analyze Optical Time Domain Reflectometer (OTDR) curve signal and the fault detection method of fiber communication link with no relay and large span in high altitude area is given, which realizes the accurate detection and location of optical fiber communication link fault events under strong noise. The theoretical analysis is basically consistent with the experimental data. The accuracy of optical fiber fault location has been greatly improved in performance. The method has been directly applied to the field detection of ultra-long optical fiber links in high altitude areas, which has certain significance for the future real-time monitoring of optical fiber cables.

In this work, we present an analytical model of dynamic power losses for enhancement-mode AlGaN/GaN high-electron-mobility transistor power devices (eGaN HEMTs). To build this new model, the dynamic on-resistance (Rdson) is first accurately extracted by our ex-traction circuit based on a double-diode isolation (DDI) method for a high operating frequency up to 1 MHz and a large drain voltage up to 600 V, thus the unique problem of an increase in the dynamic Rdson is presented. Then the impact of the current operation mode on the on/off transi-tion time is evaluated by a dual-pulse-current-mode test (DPCT) which including a discontinu-ous conduction mode (DCM) and a continuous conduction mode (CCM), thus the transition time is revised for different current mode. Afterward the discrepancy between the drain current and the real channel current is qualitative investigated by an external shunt capacitance (ESC) meth-od, thus the losses due to device parasitic capacitance are also taken into account. After these improvements, the dynamic model will be more compatible for eGaN HEMTs. Finally, the dynamic power losses calculated by this model are verified to be in good agreement with experimental results. Based on this model, we propose a superior solution with qua-si-resonant mode (QRM) to achieve lossless switching and accelerate switching speed.

The article proposes a method for determining the p-value of correlations in compositional data, i.e., those data that arise as a result of dividing the original values by their sum. Data organized in this way are typical for many fields of knowledge, but there is still no consensus on methods for interpreting correlations in such data. In a space closed by normalizing quantity, correlation coefficients behave differently than under normal conditions: their probabilities of occurrence do not coincide with those inherent in the standard scale of estimates. In the tens of the new millennium, almost all newly emerging methods for estimating correlation in compositional data began to require mandatory log-transformation of the variable values. In the method proposed here there are no log-transformations. We return to the early stages of attempting to solve the problem and rely on negative shifts in correlations in the multinomial distribution. In modeling the data, we use a hybrid method that combines the hypergeometric distribution with the distribution of any other law. During our work on the calculation method, we found that the number of degrees of freedom in compositional data measures discretely only when all the normalizing sums are equal and that it decreases when the sums are not equal, becoming a continuously varying quantity. Estimation of the number of degrees of freedom and the strength of its influence on the magnitude of the shift in the distribution of correlation coefficients is the basis of the proposed method.

Keywords: Obesity; hypothalamus; appetite; glucose homeostasis; weight-loss drugs; AGRP; POMC; NTS; incretins.

Magnetic nanoparticles (MNPs) have attracted a great interest in nanomedical research. MNPs exhibit many important properties, particularly, magnetic hyperthermia for selective killing of cancer cells is one of them. In hyperthermia treatment, MNPs act as nano-heaters when they are under the influence of an alternating magnetic field (AMF). In this work, micromagnetic simulations have been used to investigate the magnetization dynamics of a single-domain nanoparticle of magnetite in an external AMF. Special attention is paid to the circumstances dealing with a dynamic phase transition (DPT). Besides, we focus on the influence of the orientation of the magnetic easy-axis of the MNP on the dynamic magnetic properties. For amplitudes of the external AMF above certain critical value, the system is not able to follow the magnetic field and it is found in a dynamically ordered phase; whereas for larger amplitudes, the state corresponds to a dynamically disordered phase and the magnetization follows the external AMF. Our results suggest that the way how the order-disorder DPT takes place, and both the metastable lifetime as well as the specific loss power (SLP), are strongly dependent on the interplay between the orientation of the magnetic easy-axis and the amplitude of the external AMF.

There is great interest in automatically detecting road weather and understanding its impacts on the overall safety of the transport network. This can, for example, support road condition-based maintenance or even serve as detection systems that assist safe driving during adverse climate conditions. In computer vision, previous work has demonstrated the effectiveness of deep learning in predicting weather conditions from outdoor images. However, training deep learning models to accurately predict weather conditions using real-world road-facing images is difficult due to: (1) the simultaneous occurrence of multiple weather conditions; (2) imbalanced occurrence of weather conditions throughout the year; and (3) road idiosyncrasies, such as road layouts, illumination, road objects etc. In this paper, we explore the use of focal loss function to force the learning process to focus on weather instances that are hard to learn with the objective to help address data imbalance. In addition, we explore the attention mechanism for pixel based dynamic weight adjustment to handle road idiosyncrasies using state-of-the-art vision transformer models. Experiments with a novel multi-label road weather dataset show that focal loss significantly increases the accuracy of computer vision approaches for imbalanced weather conditions. Furthermore, vision transformers outperforms current state-of-the-art convolutional neural networks in predicting weather conditions with a validation accuracy of 92% and F1-score of 81.22%, which is impressive considering the imbalanced nature of the dataset.

Monte Carlo Filtering (MCF) is one of the methods of Experimental Statistical Energy Analysis (E-SEA), which allows the correction of a negative LF (Loss Factor). In this article, a modification of the MCF method, called DESA (Diagonal Extension of the Search Area), is proposed. The technique applies a non-uniform extension of the search area when generating a population of normalized energy matrices. The degree of expansion of the search area is controlled by the Diagonal Penalty Factor (DPF). The authors demonstrated the method's effectiveness on a system that could not be identified in several frequency bands by the classical MCF method. After applying DESA, it was possible to fill in the problematic bands that were missing CLF and DLF values. The paper also proposes a way to minimize the errors introduced by using overly high DPF values.

Evaluating the integrity of structures is an important issue in engineering applications. The use of vibration-based techniques has become a common approach to assessing cracks, which are the most often occurring damage in structural elements. When involving an inverse method, it is necessary to know the influence of the position and the geometry of the crack on the modal parameter changes. The geometry of the crack, both in size and shape, defines the damage severity (DS). In this study, we present a method (DS-SHC) used for estimating the DS for closed and open transverse cracks in beam-like structures by using the intact and damaged beam deflections under its weight and a Stochastic Hill Climbing (SHC) algorithm. After describing the procedure of applying DS-SHC, we calculate for a prismatic cantilever beam the severities for different crack types and depths. The results are tested by comparing the DS obtained with DS-SHC with those acquired from dynamic tests made using professional simulation software. We obtained a good fit between the severities determined in these two ways. Afterward, we performed laboratory experiments and find out that the severities obtained with the DS-SHC method can accurately predict the frequency changes due to the crack. Hence, these severities are a valuable tool for damage detection.

Wet anaerobic storage of algal biomass is a promising preservation approach which can ensure continuous supply of these feedstocks to biorefineries year-round. An effective solution to preservation must ensure minimal dry matter loss and change in biochemical composition during storage. Therefore, the objective of this study was to investigate the preservation of Nannochloropsis gaditana biomass through wet anaerobic storage and its impact on biomass quality. Prior to storage, algae sample was inoculated with two different strains of lactic acid bacteria and thereafter stored for 30 and 180 days. Each inoculant limited dry matter loss to <10% (dry basis) after the storage durations. Final pH values (4.3 - 4.8) indicate that the biomass samples were properly ensiled, achieving the acidic conditions necessary for preservation. Compositional analysis of the biomass after storage showed a reduction in carbohydrate content, a relative increase in lipid content, and no significant change to the protein fraction. Glucose and galactose were the prevalent sugar monomers. The low dry matter loss and minimal compositional change indicates that wet anaerobic storage is an effective means of preserving algal biomass, ensuring a constant supply of algal biomass feedstock to a biorefinery.

Complete pathologic response (pCR) predicts the long-term outcome of neoadjuvant treated (NAC) breast cancer (BC) but is reached in <10% of hormone-receptor-positive patients. Biomarkers able to guide adjustment or interruption of an ineffective therapy are desired. Here, we evaluated whether shifts in the serum concentration of thymidine kinase 1 (sTK1) during NAC could be utilized as a biomarker. In the PROMIX trial, women with localized HER2- BC received neoadjuvant epirubicin/docetaxel in six cycles. sTK1 was measured with an ELISA in 54 patients at cycles 1-4 and in a total of 131 patients before and 48h after cycle 1. The prognostic significance of the results was evaluated by log-rank tests of Kaplan–Meier estimates. Treatment resulted in a 2-fold increase of sTK1 before and 3-fold increase 48h after the cycles, except for the first cycle, where half of patients reacted with a decrease (post/pre sTK1- ratio <1.12) and the other half reacted with an increase (ratio >1.12). OS rates in ER+ patients with ratios of >1.12 and <1.12 were 97.7% and 78% (p=0.005), respectively, and DFS rates were 90.7% and 68% (p=0.006), respectively. Thus, response of sTK1 at the first cycle of chemotherapy could be used both as an early biomarker for guidance of chemotherapy and for the study of inherent tumor chemo-sensitivity, which could predict long-term outcome prior to therapy.

In the last few decades, glaucoma became the second biggest leading cause of irreversible vision loss. Because of its asymptotic growth, it is not properly diagnosed until the relatively late stage. To stop the severe damage by glaucoma it is needed to detect glaucoma in its early stages. Surprisingly diabetes also be the greatest cause of glaucoma. In the modern era, artificial intelligence makes great progress in the medical image processing field. Image analysis based on machine learning gives a huge success in diagnosis glaucoma without any misdiagnosis. The aim of this proposed paper is to create an automated process that can detect glaucoma and diabetic retinopathy. Here various Machine Learning models are used and results of these methods are presented.

The KARS gene encodes the aminoacyl-tRNA synthetase (aaRS) which activates and joins the lysin with its corresponding transfer RNA (tRNA), through the ATP-dependent aminoacylation of the amino acid. The KARS gene mutations have been linked to diverse neurologic phenotypes such as: neurosensorial hearing loss, leukodistrophy, microcephaly, developmental delay or regression, peripheral neuropathy, cardiomyopathy, impairment of the mitochondrial respiratory chain, hyperlactatemia, among others. This article presents the case of a Colombian pediatric patient with two pathological missense variants in a compound heterozygous state in the KARS gene.

Although it is known that the gut microbiota (GM) can be modulated by diet, the efficacy of specific dietary interventions in determining its composition and diversity in obese patients remains to be ascertained. The present work aims to evaluate the impact of a moderately hypocaloric Mediterranean diet on the GM of obese and overweight patients (OB). The GM of 23 OB patients (F/M= 20/3) was compared before (T0) and after 3 months (T3) of the nutritional intervention (NI). Fecal samples were analyzed by Illumina MiSeq sequencing of the 16S rRNA gene. At baseline, the GM characterization confirmed the typical obesity-associated dysbiosis. After 3 months of NI, patients presented a statistically significant reduction of the body weight and fat mass, along with changes in the relative abundance of many microbial patterns. In fact, we observed an increased abundance in several Bacteroidetes taxa (i.e. Sphingobacteriaceae, Sphingobacterium, Bacteroides spp., Prevotella stercorea) and depletion of many Firmicutes taxa (i.e. Lachnospiraceae members, Ruminococcaceae and Ruminococcus, Veillonellaceae, Catenibacterium, Megamonas). In addition, the phylum Proteobacteria showed an increased abundance, while the genus Sutterella, within the same phylum, decreased after the intervention. Metabolic pathways, predicted by bioinformatic analyses, showed a decrease in membrane transport and cell motility after NI. The present study extends our knowledge of the GM profiles in OB, highlighting the potential benefit of a moderate caloric restriction in counteracting the gut dysbiosis.

This article reveals a best possible design for hybrid dispersion compensating fiber (HyDCF) with high birefringence established on modified broadband compensating structure through S, C and L telecommunication bands. The simulation outcome exhibits relatively higher birefringence of 3.76×10-2 at wavelength of 1550 nm. The suggested fiber also has dispersion compensation characteristics in an inclusive series of wavelengths which covers 1400-1625 nm. The reported design can achieve dispersion quantity of – 606 ps/ (nm.km) at 1550 nm effective wavelength. The reported fiber design matches the relative dispersion slope (RDS) 0.003694 nm-1 similar to single mode fiber at 1550 nm operating wavelength. This fiber demonstrates negatively flattened effective dispersion of – 2.703 ± 0.734 ps/ (nm.km) within 180 nm flat band ranging from 1460-1640 nm wavelength. It is also convenient to optical high bit rate communication systems. The low confinement loss is found 3.756×10-10 dB/m at the operating wavelength. This design also achieves highly nonlinear coefficient of 50.34 W-1km-1. In some cases, it can also be used in sensing applications.

Influence of core flow inlet swirl angle on aerodynamic performances of an exhaust nozzle with scarfed lobed mixer was studied by the validated computational approach. The computational simulation was conducted by resolving the steady form of discretized three-dimensional Reynolds Averaged Navier-Stokes equations with the shear stress transport k-Ω turbulence model. Simulation results depict that swirling motions have ignorable influence on the flow field of the top part in the cross sections slightly downstream of the lobed trailing edge. Besides, for the flow field downstream of the L/D=0.1 cross section, the swirling motions are suggested to cause the clockwise stream-wise vortex to stretch into several smaller-scale vortexes. When the case with a bigger swirling angle is investigated, the induced smaller-scale vortexes are more strengthened by the swirling motions. Concerning the 15° swirling case, the loss caused by the destroyed vortex pattern and the benefit induced by the improved smaller-scale vortexes almost counteract with each other with respect to the thermal mixing efficiency. In the last studied cross section as compared with the baseline case, the case with a maximum swirling angle of 30° has increased 6.94% for the thermal mixing efficiency and decreased 0.42% for the total pressure recovery coefficient.

Failure of various weight-loss programs and long-term maintenance of favorable body composition in all kinds of people is high, since the majority go back to old dietary patterns. Many studies have documented the efficacy of a plant-based diet (PBD) for body mass management, but there are opinions that maintaining a PBD is difficult. We aimed to evaluate the long-term success of a whole-food plant-based (WFPB) lifestyle program. We investigated the differences in the obesity indices and lifestyle of 151 adults (39.6 ± SD 12.5 years), who were on our program for short (0.5–<2 years), medium (2–<5 years), or long term (5–10 years). Body-composition changes were favourable for all three groups, both genders and all participants. There were no differences in relative body-composition changes (BMI, body fat percentage and muscle mass index (MMI)) between the three groups. All participants improved their BMI (baseline mean pre-obesity BMI range (kg/m²): 26.4 ± 5.6 to normal 23.9 ± 3.8, p < 0.001), decreased body mass (–7.1 ± 8.3 kg, p < 0.001) and body fat percentage (–6.4 ± 5.6 % points, p < 0.001). Those with the highest BMI at baseline lost the most of: a) BMI units, b) total body mass and c) body fat (a) (kg/m²) (–5.6 ± SD 2.9, –2.4 ± 1.8 and –0.9 ± 1.5), b) (kg) (–16.1 ± SD 8.8, –7.1 ± 5.4 and –2.5 ± 4.5) and c) (% points) (–9.5 ± SD 5.7, –6.6 ± 4.6 and –4.7 ± 5.3) for participants who had baseline BMI in obese, overweight and normal range, respectively; p_{baseline vs. current} < 0.001 for all). 85.6% (101 out of 118) of parents of underage children (< 18 years), introduced WFPB lifestyle to their children. WFPB lifestyle program provides long-term lifestyle changes for reversal of obesity and is effective transferred to the next generation.

This paper presents the design of a high frequency zero voltage switching (ZVS) full-bridge converter with a phase-shifted driving signal for photovoltaic applications. The resonant power converter can provide high-power capacity under high-frequency operation. The proposed power converter can also reduce the size of the transformer under the same power rating. The high-frequency transformer was developed by using the resonant and switching frequencies of the power converter to reduce the switching loss and to improve the system efficiency. Phase-shifted modulation was selected to drive the switches of a full-bridge power converter based on the switching loss minimization method. The desired output voltage was controlled using a closed-loop controller under a loop gain stability margin. The simulation results showed that the output voltage can be controlled to the desired constant when the input voltage changes from 30 VDC to 60 VDC. The desired output voltage of power converter is constant at 400 VDC. The power converter can transfer the DC supply to a 220 VAC household via grid-connected inverter. Therefore, the proposed study showed the effectiveness of the phase-shift ZVS full-bridge power converter with high-frequency transformer. This power converter can control the operation of the desired voltage system and has a small sizing of power converter system, low switching loss, and high system efficiency.

The eddy current loss should be optimized to be as less as possible for the stability of permanent magnet in high speed permanent magnet synchronous motor (HSPMSM) rotor and ensure the high efficiency and low temperature of the motor. This paper analyzes the eddy current distribution in rotor, with consideration of the conflict of the thickness of sleeve and diameter of the rotor, calculating the eddy current loss (ECL) and the thermal distribution via Separation of variables method for solving Maxwell's equations with analytical hieratical model of ECL constructed. The optimization result of ECL of the HSPMSM whose power and rated speed is 30kw 48000r/min can be got by multi-objective optimization method, combined weighting coefficient method and traversal algorithm based on chaotic local search particle swarm optimization (CLSPSO), utilizing ECL analytical model and other analytical constraints. Related experiment and measurement has been implemented with new approach of loss separation.

Many agricultural water uses crowd the river ecology of the river water, thus leading to irreversible habitat damage. This paper presents an agricultural economic loss calculation model that is based on river ecological basic flow (REBF) protection by introducing a typical crop water requirement coefficient. First, the water balance equation is used according to a set of REBF protection values to compute the agricultural water shortage that results in the REBF. Second, the agricultural water shortage that results in REBF protection and a typical crop water requirement coefficient are used to determine the food production generated by REBF protection. Finally, the loss of food production and the food market prices are used to determine the agricultural economic loss caused by the different protection levels of REBF. A case study of the Weihe River in China is conducted. The calculation model is used to compute the agricultural economic loss on the basis of REBF protection in the Baoji section of the Weihe River, and the change law of the agricultural economic loss that results in different levels of the REBF is discussed. In addition, changes in the canal water use coefficient and the crop structure that affect agricultural economic loss are analyzed. Results show that the spatial and temporal variations in the runoff affect the changes in time and space of the agricultural economic loss. The higher the REBF protection level, the higher the agricultural economic loss. In addition, agricultural economic loss can provide a quantitative basis for reasonable REBF protection. The size of agricultural economic loss helps the government sector in decision-making on REBF protection.

The gap of standardization for conducted and field coupled electromagnetic interferences (EMI) in the 2–150 kHz frequency range can lead to Electromagnetic Compatibility (EMC) problems. This is caused by power systems such as PWM controlled rectifiers, photovoltaic inverters or charging battery units in electric vehicles. This is a very important frequency spectral due to interferences generate in a wide range of dives and, specifically, communication problems in the new technologies and devices incorporated to the traditional grid to convert it into Smart Grid. Consequently, it is necessary to provide new solutions to attenuate this kind of interferences, which involve finding new materials able to filter the electromagnetic noise. This contribution is focused on characterizing the performance of different cable ferrite compositions in order to determine the effectiveness of most common materials such as MnZn and NiZn and a new range based on nanocrystalline solutions. This analysis procedure is carried out through two methods: theoretical method by determining the insertion loss through measuring impedance parameter and proposing a new empirical technique based on measuring directly the insertion loss parameter. Therefore, the main aim of this characterization process is to determine the performance of these cable ferrites to reduce the interferences in this controversial frequency range. From the results obtained, it is possible to deduce that nanocrystalline cable ferrites provide the best performance to filter the electromagnetic noise in the 2-150 kHz frequency range.

Although congenital sensorineural hearing loss (SHL) in the bilateral cochleae mainly results from genetic abnormalities, chronic SHL progressing in later life is often influenced by systemic immune disturbances, including autoimmunity, chronic inflammation, and immunosenescence. We have investigated the relationship between the inner ear and systemic immunity and reviewed the possibilities to prevent SHL, including autoimmune SHL and age-related SHL. We also demonstrated two lymphocyte populations, interleukin 1 receptor type II (IL-1R2)-positive T cells (T1R2) and naturally occurring regulatory T cells (nTregs) in CD4⁺ T cells, which increase with aging, suppress host immune function and promote organ degeneration. Alterations in systemic immunity by fewer microbial antigen challenges in the living environment, elimination of immune suppressive lymphocytes, or immune rejuvenation with a reconstituted thymus may contribute not only to renew the cochlear function in SHL, but also to extend the healthy life of functional organs in a vigorous and youthful body, one of humanity’s greatest dreams.

Background: To prevent excessive compression of the cortical layer, which can lead to marginal bone loss, various companies have introduced specialized drills. However, these drills often lack the necessary precision, as the operator’s hand may not be stable enough to prevent ovalization and over-widening, nor precise enough to maintain coaxial alignment. Therefore, the aim of this study was to develop a device capable of achieving calibrated cortical preparation in terms of both dimension and coaxiality. Methods: A machining technology based on drilling principles was employed to create the device. Results: Nine blades were incorporated between the transmucosal neck and the implant threads, enabling the blades to cut the cortical bone coaxially during the implant insertion process. Conclusions: The implant with integrated blades was engineered to facilitate precise cortical bone preparation, ensuring both accurate dimensions and coaxial alignment. This ensures that the radial compressive stresses transmitted from the implant to the peri-implant bone during surgery can be precisely controlled. The experimental study outcomes discussed in this article validate the effectiveness of the implant design.

Femtosecond laser two-photon polymerization (TPP) technology, known for its high precision and capability to fabricate arbitrary 3D structures, has been widely applied in the production of various micro-nano optical devices, achieving significant advancements particularly in the field of photonic wire bonding (PWB) for optical interconnects. Currently, research on optimizing both the optical loss and production reliability of polymeric photonic wires is still in its early stages. One of the key challenges is that inadequate metrology methods cannot meet the demand for multiphysical measurements in practical scenarios. This study utilizes in-situ scanning electron microscopy (SEM), for the first time, to monitor the working PWBs fabricated by TPP technology at the microscale. Optical and mechanical measurements are made simultaneously to evaluate the production qualities and to study the multiphysical coupling effects of PWBs. The results reveal that photonic wires with larger local curvature radii are more prone to plastic failure, while those with smaller local curvature radii recover elastically. Furthermore, larger cross-sectional dimensions contribute dominantly to the improved mechanical robustness. The optical loss deterioration of the elastically deformed photonic wire is only temporary, which can be fully recovered when the load is removed. After further optimization based on the results of multiphysical metrology, the PWBs fabricated in this work achieve a minimum insertion loss of 0.6 dB. In this study, the multiphysical analysis of PWBs carried out by in-situ SEM metrology offers a novel perspective for optimizing the design and performance of microscale polymeric waveguides, which could potentially promote the mass production reliability of TPP technology in the field of chip-level optical interconnection.

Gold is a significant revenue source for custom copper smelters facing profitability challenges due to low treatment and refining charges, stricter regulations, and rising costs. Gold is also often blended with copper concentrates, but precise recovery rates from smelting processes are poorly documented despite gold critical economic importance. This paper aims to provide the first comprehensive estimates of gold first-pass recovery across various operational units within the copper sulfide concentrate processing flowsheet. It evaluates the effectiveness of different copper smelting and converting technologies in recovering gold. Optimizing gold first-pass recovery is especially important to enhance immediate financial returns and responsiveness to market dynamics, allowing companies to capitalize on favorable gold prices without delays. Given the absence of direct measurements for gold recovery rates, this research develops an estimation method based on understanding gold loss mechanisms during smelting. The study identifies and analyzes key input and output parameters by examining data from various copper producers. By correlating these parameters with gold loss, the research estimates gold first-pass recovery rates within the copper smelting process. Among integrated smelting-converting routes, the flash smelting to Peirce-Smith converting route achieves the highest gold first-pass recovery (98.8–99.5%), followed by the Mitsubishi continuous smelting and converting process (94.3–99.8%), bottom-blowing smelting to bottom-blowing converting (95.8%), flash smelting to flash converting (95.5%), Teniente smelting to Peirce-Smith converting (95.2%), and the Noranda continuous smelting and converting process (94.8%). The final recovery rates are expected to be higher considering the by-products internal recirculation and post-processing within the copper flowsheet. Additionally, superior gold recoveries are attributed to advanced metallurgical practices and control systems, which vary even among companies with similar technologies. The research demonstrates that copper smelting can effectively recover over 99% of gold from sulfide concentrates. Gold accumulates up to 1000 times its original concentration in anode slime during electrolytic refining, generating 5-10 kilograms of slime per ton of copper, which is further processed to recover gold and other by-products. Major smelters operate precious metal plants where recovering gold from highly concentrated anode slime is both cost-effective and efficient.

Brain tumor being one of the major health hazards always needs a prompt diagnosis for the early treatment options to improve the chances of the survival of the patients. Traditional manual assessment of MRI (magnetic resonance imaging) to identify these conditions is a common practice. Hence, automation of the diagnosis practices can considerably improve the quality of the treatment procedures. In recent years almost every method for the automated diagnosis of brain tumor detection uses a deep learning technique. Despite decent works current techniques need a significant improvement to produce better results. Along with failure to produce decent results, the current deep learning models present very complex architectures which sometimes require huge computational resources. Therefore, in this paper we present a novel method that uses a lightweight dual-stream model with dual-input to detect brain tumors on MRI images. Both the inputs use different pre-processing mechanisms based on Contrast Limited Adaptive Histogram Equalization (CLAHE) and White Patch Retinex algorithm in order to enhance the feature learning capabilities of the proposed model. In addition, the proposed method uses a two-fold margin loss to boost training process for better feature learning. The proposed method produces state-of-the-art results for the detection of Glioma, Meningioma and Pituitary tumors. The model presents accuracy of 99%, 98% and 99% respectively for Glioma, Meningioma and Pituitary tumor detection.

Can the type of implant rehabilitation influence peri-implant bone loss in case of full-arch mandibular prosthesis? The purpose of the study was to assess, by orthopantomograms (OPG), bone loss around implants in different types of implant-supported prosthetic rehabilitations and evaluate potential risk factors associated with the number and location of implants that may have an association with bone defect. A radiographic study was conducted on 22317 OPGs in the time range from 2010 to 2024. All OPGs with implant-supported prosthetic mandibular rehabilitations were included in the study. A total of 155 OPGs were evaluated, with peri-implant bone loss identified in 64 (41.3%). Distal implants (furthest from the center) across various positioning patterns were most susceptible to bone loss, with positions 3.6 and 4.6 demonstrating the most frequent occurrences (25 and 26 cases, respectively). χ² test revealed significant associations between both implant positioning pattern (p &lt; 0.001) and number of implants (p &lt; 0.001) with peri-implant bone loss. Also by updating the sample of OPGs, increased susceptibility to bone resorption was found for implants placed distal to the mental foramen compared to mesial ones in full-arch implant-supported fixed prostheses. Prospective clinical studies will then be useful to investigate this finding further.

The finite-time turnpike property describes the situation in an optimal control problem where an optimal trajectory reaches the desired state before the end of the time interval and remains there. We consider a machine learning problem with a neural ordinary differential equation that can be seen as a homogenization of a deep ResNet. We show that with appropriate scaling of the quadratic control cost and the non-smooth tracking term the optimal control problem has the finite-time turnpike property, that is the desired state is reached in the interior of the time interval and the optimal state remains there until the terminal time $T$. This property is useful to achieve a compromise between the depth of the network and the size of the optimal system parameters which we hope will be useful to determine optimal depths for neural network architectures in the future.

Last Chance Tourism (LCT) is an increasingly popular phenomenon whereby tourists seek encounters with vanishing landscapes, cultures, and endangered species. However, there are concerns that it is not sufficiently ecologically informed, has a large carbon footprint, and may put further pressure on vulnerable ecosystems and communities. The Arctic has emerged as a major global frontier for LCT, and at the same time is at the forefront of disruptive and accelerating climate change. Here a review of important LCT literature is combined with a review of key insights from the concept of Ecological Grief, which calls for explicitly mourning the losses of formerly ecologically rich landscapes, species diversity, and traditional knowledge. While there is currently insufficient engagement with grief and mourning in LCT, Ecological Grief can provide a new research focus as well as a pathway to share empathy, concern, and sorrow between scientists, communities, and visitors—thereby offering an alternative way to critically reflect upon our connections with the vanishing cryosphere in the Anthropocene.

The agricultural sector is amidst an industrial revolution driven by the integration of sensing, communication, and artificial intelligence (AI). Within this context, the internet of things (IoT) takes center stage, particularly in facilitating remote livestock monitoring. Challenges persist, particularly in effective field communication, adequate coverage, and long-range data transmission. This study focuses on employing LoRa communication for livestock monitoring in mountainous pastures in the north-western Alps in Italy. The empirical assessment tackles the complexity of predicting LoRa path loss attributed to diverse land-cover types, highlighting the subtle difficulty of gateway deployment to ensure reliable coverage in real-world scenarios. Moreover, the high expense of densely deploying end devices makes it difficult to fully analyze LoRa link behavior, hindering a complete understanding of networking coverage in mountainous environments. This study aims to elucidate the stability of Lora link performance in spatial dimensions and ascertain theextent of reliable communication coverage achievable by gateways in mountainous environments. Additionally an innovative deep learning approach was proposed to accurately estimate path loss across challenging terrains. Remote sensing contributes to land-cover recognition, while Bidirectional Long Short-Term Memory (Bi-LSTM) enhances the path loss model’s precision. Through rigorous implementation and comprehensive evaluation using collected experimental data, this deep learning approach significantly curtails estimation errors, outperforming established models. Our results demonstrate that our prediction model outperforms established models with a reduction in estimation error to less than 5dB, marking a 2X improvement over state-of-the-art models. Overall, this study signifies a substantial advancement in IoT-driven livestock monitoring, presenting robust communication and precise path loss prediction in rugged landscapes.

Background: One challenge in implant dentistry is to reduce marginal bone resorption to avoid long-term esthetic and biological complications. Sub-gingival implant placement has been suggested as a suitable strategy. Methods: 38 healthy patients were enrolled to receive bone level (BL – Control group) or 2 mm sub-crestal (SC - Test group) conical connection, platform-switched implants. An immediate tissue level abutment was used in the Test group by following a One Time Abutment (OTA) restorative procedure. Marginal Bone Modification (MBM) was calcu-latied on standardized radiographs at surgery (T0), loading (T1), and 6 months (T2) and 12 months after loading (T3), and cathegorised in Bone Loss (BL) if the resorption occurred below the implant neck and Bone Remodeling (BR) if above. Pocket probing depth (PPD), Bleeding on probing (BoP) and Plaque Index (PI) were also collected. Results: The mean MBM in the test group after 12 months was 0.61mm, compared to 0.52mm in the control group. However, no BL was observed in the test group, as the MBM completely occurred above the implant neck as BR, whilst in the control group MBM corresponded in total to BL. The average PPD was 2.38mm in the test group and 3.04mm in the control group after 12 months, BoP 50% and 43%, PI 33% and 19.44% respectively. Conclusions: Sub-crestal conical connection, platform-switched implants could be a suitable clinical choice to avoid BL with exposure of the treated implants surfaces.

Rosavin, a phenylpropanoid in Rhodiola rosea's rhizome, an adaptogen, is known for enhancing the body's response to environmental stress. It significantly affects cellular metabolism in health and many diseases, particularly influencing bone tissue metabolism. In vitro, rosavin inhibits osteoclastogenesis, disrupts F-actin rings formation, and lowers osteoclastogenesis-related gene expression (cathepsin K, CTR, TRAF6, TRAP, MMP-9). It also impedes NFATc1, c-Fos, NF-κB, and MAPK signaling pathways, and blocks phosphorylation processes crucial for bone resorption. Moreover, rosavin promotes osteogenesis, osteoblast differentiation and increases Runx2 and OCN expression. In vivo studies show its effectiveness in enhancing BMD in PMOP mice, re-straining osteoclast maturation, and increasing active osteoblast percentage in bone tissue. It modulates mRNA expressions (increasing EEF2 and decreasing HDAC1, thereby activating os-teoprotective epigenetic mechanisms) and alters various serum markers, including decrease of CTX-1, TRAcp5b, RANKL, M-CSF, TRAP, and increase of ALP and OCN. Additionally, when combined with zinc and probiotics, it reduces pro-osteoporotic MMP-3, IL-6, TNF-α, and en-hances anti-osteoporotic IL-10 and TIMP3 expressions. This paper aims to systematically review rosavin's impact on bone tissue metabolism, exploring its potential in osteoporosis prevention and treatment, and suggesting future research directions.

This study delves into the complex dynamics of Underwater Wireless Optical Communication (UWOC) in varied Harbor water conditions. Focusing on four distinct types of Harbor water, the research employs the Monte Carlo method to simulate photon transmission and analyze critical UWOC characteristics. Key parameters such as the transmitted full divergence angle, received aperture, and Field of View (FOV) are meticulously evaluated for their impact on communication efficacy. The study first explores the relationship between laser power variation, attenuation length, and divergence angle, revealing how different water qualities influence received power and time delay spread. Notably, the received normalized power loss and time delay spread are found to be more significantly affected by communication distance than water quality. In addition, under the condition of small received aperture and FOV, the influence on normalized power loss and time spread is more obvious in Harbor water. The findings offer novel insights into the challenges of UWOC in Harbor waters, particularly in terms of light scattering and absorption properties, and contribute to the optimization of communication systems in such complex underwater environments. Furthermore, the analysis of time pulse spread in turbid water quality is of great significance for the analysis and improvement of underwater wireless optical timing, ranging and positioning.

Optic neuritis (ON) is the most common cause of vision loss in young adults. It manifests as acute or subacute vision loss, often accompanied by retrobulbar discomfort or pain on eye movements. Typical ON is associated with Multiple Sclerosis and is generally mild and steroid-responsive, whereas atypical forms are characterized by unusual features, such as optic disc edema, poor treatment response and bilateral involvement, and are often associated with autoantibodies against aquaporin-4 (AQP4) and Myelin Oligodendrocyte Glycoprotein (MOG). However, in rare cases AQP4 and MOG antibodies will come back negative, plunging the clinician in a diagnostic conundrum. Seronegative ON warrants a broad differential diagnosis, including autoantibody-associated, granulomatous, and systemic disorders. These rare forms need to be identified promptly, as their management and prognosis is greatly different. The scope of this review is to describe possible, rarer etiologies of ON when AQP4 and MOG antibodies are negative and discuss their diagnosis and treatment.

Eosinophilic Granulomatosis with Polyangiitis (EGPA) is a rare systemic necrotizing vasculitis, affecting small-to-medium sized vessels. EGPA’s clinical manifestations are heterogeneous affecting different organs and systems and the upper respiratory tract can be affected with Ear, Nose and Throat (ENT) involvement. The aim of our study was to assess type manifestations at time of diagnosis in a cohort of EGPA patients and correlate findings with baseline variables (sex, age, antineutrophil cytoplasmic antibodies –ANCA- status) and literature reports. Main ENT manifestations in our patients at time of diagnosis were: nasal polyposis (CRSwNP) (52%), turbinate hypertrophy (48%), nasal swelling (40%), rhinorrhoea (40%), chronic rhinosinusitis without nasal polyposis (CRSsNP) (32%), nasal bone deformities (32%), nasal crusts (20%), nasal mucosal ulcers (12%), corditis (12%), hoarseness/dysphonia (12%), hearing loss (12%), mucoceles(4%) eosinophilic rhinitis (4%). No correlations were found between sex, age, ANCA status and ENT clinical manifestations. A polymorphic ENT involvement is often observed at early stages of EGPA. The presence of nasal, sinus, ear and/or laryngeal manifestations in patients with asthma and hypereosinophilia, independently of sex, age or ANCA status, should raise allert for further investigation and differential diagnosis for EGPA. ENT specialists should be aware of their leading position in this diagnostic race.

Our findings indicate that all five phytocannabinoids reduce HG-HL-induced -cell loss likely through reducing apoptosis and pyroptosis. The protective effects of CBD, THCV, CBC, and CBN were seen in the GSIS impairment by HG-HL. Although all five phytocannabinoids tested in this research demonstrated the capability to inhibit β-cell dedifferentiation induced by HG-HL, CBD seems to be more effective compared to the other phytocannabinoids, as indicated by the specific biomarker responses of β-cells and progenitor cells to CBD.

This study aimed to compare the differences in durability and prestress loss between normal-weight concrete (NC) and lightweight aggregate concrete (LWC) prestressed box girders, which were constructed at the same time in the same area, so as to verify the superiority of using synthetic lightweight aggregate (LWA) made from reservoir sediments in prestressed bridges. For the NCs and LWCs used in prestressed box girders, the basic mechanical properties were tested on the one hand, and the durability properties were tested on the other hand. Then, through the prestress monitoring system, the prestress loss of the two groups of the prestressed box girders was tracked. The results of the durability test confirmed that LWC can inhibit the penetration of air, water, and chloride ions by strengthening the interfacial transition zone between the aggregate and the cement paste, thereby improving its durability. Moreover, the magnetic flux prestress loss of the NC prestressed box girder reached 8.1%. In contrast, the magnetic flux prestress losses on both sides of the LWC prestressed box girder were 4.6% and 4.9%, respectively. This verified that, under the same environmental conditions, the use of LWC produced less of a prestress loss than the use of NC.

The changes in storage loss, water distribution status, gel characteristics, TBARS, total volatile basic nitrogen, and total plate count of cooked reduced-phosphate silver carp surimi batter during cold storage at 4 °C were investigated. The storage loss, content of free water, pH, hardness, TBARS, total volatile basic nitrogen value and total plate count of all cooked reduced-phosphate silver carp surimi batters significantly increased (P < 0.05) with increasing the cold storage time. Meanwhile, the content of immobilized water, whiteness, springiness, and cohesiveness decreased significantly (P < 0.05). At the same cold storage time, the sample of cooked reduced-phosphate silver carp surimi batter has lower water mobility, darker colour and better texture characteristics, but the values of TBARS, total volatile basic nitrogen and total plate count were not significantly different (P > 0.05). To sum up, the use of potassium bicarbonate instead of sodium tripolyphosphate could produce the cooked reduced-phosphate silver carp surimi batter with better water holding capacity and gel characteristics during cold storage.

The Colony-Forming Unit (CFU) counting problem remains a complex issue without a universal solution in biomedical and food safety domains. A multitude of sophisticated heuristics and segmentation-driven approaches have been proposed by numerous researchers. Among those, U-Net is the most frequently cited and popular Deep Learning method. The latter approach provides a segmentation output map and requires an additional counting procedure which accounts for unique segmented regions and detected microbial colonies. However, because of pixel-based targets it tends to generate irrelevant artifacts or errant pixels, leading to inaccurate and mixed post-processing results. In response to these challenges, we propose a novel hybrid counting approach, incorporating a multi-loss U-Net reformulation and a post-processing Petri dish localization algorithm. First of all, our unique innovation lies in the multi-loss U-Net reformulation. We introduce an additional loss term at the bottleneck U-Net layer, focusing on delivering an auxiliary signal indicating where to look for distinct CFUs. Second, our novel localization algorithm accurately incorporates an agar plate and its bezel into the CFU counting routines. Finally, our proposition is further enhanced by the integration of a fully automated solution. This comprises a specially designed uniform Petri dish illumination system and a counting web application. The latter application is capable of directly receiving images from the camera, which are subsequently processed, and the segmentation results are sent back to the user. This feature provides an opportunity to correct the CFU counts, offering a feedback loop that contributes to the continued development of the Deep Learning model. Through extensive experimentation, we have found that all probed multi-loss U-Net architectures incorporated in our hybrid approach consistently outperform their single-loss counterparts which utilize exclusively the combination of Tversky and Cross-Entropy training losses at the output U-Net layer. We report further significant improvements by the means of our novel localization algorithm. This reaffirms the effectiveness of our proposed hybrid solution in addressing contemporary challenges of the precise in-vitro CFU counting.

A novel prediction model for crack development of reinforced concrete (RC) piles with localized chloride corrosion in marine environment is proposed. A discrete method is used to solve the corrosion pit radius model and a crack extension model is developed to investigate the initiation and extension of cracks. The maximum corrosion degree of reinforced concrete pile is predicted according to the limit crack criterion, and finally a sensitivity analysis is carried out on the important parameters of crack extension. The results show that the radius of corrosion pit, the depth corrosion pit and cross-sectional area loss of reinforcement gradually increase as the corrosion level increases. The loss of local reinforcement section at crack initiation decreases with the increase of the ratio of concrete cover to initial diameter, and increases with the increase of pitting factor. The required pit depth for reinforcement cracking increases with the increase of the ratio of concrete cover thickness to diameter. The loss of cross-sectional area of reinforcement and the radius of corrosion pit increase with the increase of initial diameter of reinforcement. Increasing the pitting factor will reduce the pit depth and make the crack width develop faster before reaching the limit crack width. Increasing the concrete cover thickness can provide an improvement in the propagation of cracks. A comparative analysis shows that the localized corrosion pattern is more in conformity with marine engineering practice.

In this paper, under the symmetric entropy and the scale squared error loss functions, we consider the maximum likelihood (ML) estimation and Bayesian estimation of the Shannon entropy and Rényi entropy of the two-parameter inverse Weibull distribution. In the ML estimation, the dichotomy is used to solve likelihood equation. In addition, the approximation confidence interval is given by the Delta method. Because the form of estimation results is more complex in the Bayesian estimation, the Lindley approximation method is used to achieve the numerical calculation. Finally, Monte Carlo simulations and a real data set are used to illustrate the results derived. By comparing the mean square error between the estimated value and the real value, it can be found that the performance of ML estimation of Shannon entropy is better than that of Bayesian estimation, and there is no significant difference between the performance of ML estimation of Rényi entropy and that of Bayesian estimation.

Drought stress is a major production constraint in crops globally. Crop wild relatives are important source of resistance and tolerance for both biotic and abiotic stresses, respectively. A breeding program was initiated to introgress drought tolerance in sunflower through hybridization between the wild species Helianthus argophyllus and the cultigen pool of H. annuus. Selection was carried out in the F2 to F5 segregating populations for high cuticular waxes, smaller leaf area, single heading and high oil content. The selected F5 breeding lines were compared with non-adapted elite sunflower germplasm in a replicated randomized complete block research project using different water treatments comparing fully irrigated (T0), with 75 (T1), 50 (T2) and 25% (T3) irrigation treatments. The comparison between the two types of germplasm showed that drought tolerant breeding lines had comparatively lesser decreases in leaf area, shoot weight and root shoot ratio 10 under the various drought treatments. Leaf area of the drought selected F5 lines were smaller than that of the elite germplasm under controlled irrigated treatments, but they maintained their leaf area under the drought treatments. Several drought resistant promising lines D-2, D-5, and D-27 were identified and showed high leaf area, great root length and increase root to shoot ratio under the highest stressed treatments (T3). Some of the lines could be directly used for the development of drought tolerant hybrids. Combining ability test indicated D-27 (F7) as good general combiner for seed yield plant−1 and oil contents when mated with male line RSIN.82. These hybrids could help to minimize seed yield losses due to water stress and to achieve profitable cultivation of sunflower in 18 arid regions of Pakistan.

Biodiversity loss has been identified as one of the environmental impacts where humankind has been tres-passing planetary boundaries most significantly. Going beyond the pressures causing damages (calling them ‘direct drivers’) and analysing their underlying driving forces, IPBES, the Intergovernmental Sci-ence-Policy Platform for Biodiversity and Ecosystem Services, also identified a series of indirect drivers. The Montreal-Kunming Global Biodiversity Framework GBF including its suggested monitoring approach is intended to and claims to be a policy response to such analyses. However, to assess the human impact on ecosystems as a basis for planning conservation and restoration, as foreseen in the GBF, monitoring ecosystem typologies (in the GBF with reference to the UN statistical standard SEEA ES, which in turn refers to the IUCN ecosystem classification) is not enough. It needs to be complemented with data on the severity of human impacts, and on the history of places, i.e. how and when the current ecosystem status was brought about. In this conceptual paper we suggest LUI, a deliberately simple ordinal scale index for land use intensity changes, to address these two gaps. It is based on the hemeroby concept, measuring the human impact as deviation from naturalness. This makes it an information collection and presentation tool for those working in landscape planning and management. LUI’s simple and intuitively understandable structure makes it suitable for citizens’ science applications, and thus for participative monitoring when extensive statistical data gathering is not feasible, and past data are not available. Of course is can also be used as a simple too for communicating when detailed statistical data series are available. While the aggregate index is expected to communicate well, its components are more relevant to motivate and help policy makers to prioritise their decisions according to the severity of recent anthropogenic ecosystem disturabances.

One of the main technological and economic challenges for an engineer is designing high-quality products in manufacturing processes. Most of these processes involve a large number of variables included the setting of controllable (design) and uncontrollable (noise) variables. Robust Design (RD) method uses a collection of mathematical and statistical tools to study a large number of variables in the process with a minimum value of computational cost. Robust design method tries to make high-quality products according to customers’ viewpoints with an acceptable profit margin. This paper aims to provide a brief up-to-date review of the latest development of RD method particularly applied in manufacturing systems. The basic concepts of the quality loss function, orthogonal array, and crossed array design are explained. According to robust design approach, two classifications are presented, first for different types of factors, and second for different types of data. This classification plays an important role in determining the number of necessity replications for experiments and choose the best method for analyzing data. In addition, the combination of RD method with some other optimization methods applied in designing and optimizing of processes are discussed.

Changes in food preferences after bariatric surgery may alter its effectiveness as a treatment for obesity. We aimed to compare food reward for a comprehensive variety of food categories between patients who received a sleeve gastrectomy (SG) or a Roux-en-Y gastric bypass (RYGB) and to explore whether food reward differs according to weight loss. In this cross-sectional exploratory study, food reward was assessed using the Leeds Food Preference Questionnaire (LFPQ). We assessed liking and wanting of eleven food categories. Comparisons were done regarding type of surgery and Total Weight Loss (TWL; based on tercile distribution). Fifty-six patients (30 SG and 26 RYGB) were included (women: 70%; age: 44.0 (11.1) y). Regarding the type of surgery, scores were not significantly different between SG and RYGB, except for ‘non-dairy products – without color’ explicit liking (p = 0.04). Regarding TWL outcomes, explicit liking, explicit wanting and implicit wanting, scores were significantly higher for Good responders than Low responders for ‘No meat – High fat’ (post-hoc corrected p-value: 0.04, 0.03 and 0.04, respectively). Together, our results failed to identify major differences in liking and wanting regarding the type of surgery and tended to indicate that higher weight loss might be related to a higher reward for high protein-content food. Rather to focus only on palatable foods, future studies should also consider a broader range of food items, including protein reward.

Human-driven biodiversity destruction are responsible for significant and sustained heritage losses in Africa. In Venda, northern South Africa, biodiversity losses are eroding the existence of sacred places. Such places define the essence of indigenous people’s identity and well-being. We highlight how developments in Venda such as mining and agricultural expansion since apartheid times have destroyed biodiversity in the broader landscape, undermining efforts to reduce hunger and poverty. Thathe forest, Lake Fundudzi and Phiphidi waterfalls are central to Venda mythology and legends, origins and identity and are key towards conserving current biodiversity and heritage losses.

The power function distribution is a flexible waiting time model that may provide better fit for some failure data. This paper presents the comparison of the maximum likelihood estimates and the Bayes estimates of two-parameter power function distribution. The Bayes estimates are obtained, using conjugate priors, under five loss functions consist of square error, precautionary, weighted, LINEX and DeGroot loss function. The Gibbs sampling algorithm is proposed to generate samples from posterior distributions and in result the Bayes estimates are computed. The comparison of the maximum likelihood estimates and the Bayes estimates are done through the root mean squared errors. One real-life data set is analyzed to illustrate the evaluation of proposed methods of estimation. Finally, results from the simulation are discussed to assess the performance behavior of the maximum likelihood estimates and the Bayes estimates.

Aim: the purpose of the present prospective, case series study were to report implant survival rate and marginal bone remodeling expected five years after loading using dental implants placed in in the daily practice. Material and Methods: this research was designed as an open-cohort, prospective case series study. Any completely or partially edentulous patients scheduled to receive at least one bone leve were considered eligible for this study. Primary outcomes were: cumulative implant (ISR) and prosthetic (PSR) survival rates, and any complications experienced up the five years follow-up. Secondary outcomes were: marginal bone remodeling, implant insertion torque, implant stability quotient (ISQ), and thickness of gingival biotype. Results: ninety consecutive patients (34 males and 56 females; mean age 53.2±15.4 years; range of 24–81 years), 243 implants were placed and followed for at least five years after loading (mean of 65.4±3.1 months; range of 60–72 months). The mean implant insertion torque was 42.9±4.8 Ncm (range from 15 to 45 Ncm). Overall, 83.5% of the implants (n=203) were placed with an insertion torque between 35 and 45 Ncm. At the one year follow-up, no drop-outs were recorded, but 17 patients (18.9%) with 18 restorations (12.6%) delivered on 34 implants (14%) were lost at the five years examination. At the five-year examination, six implants failed in six patients, resulting in a cumulative ISR of 97.5%. At the five-year follow-up, four prostheses failed (2.8%) resulting in a cumulative PSR of 97.2%. At the five-year examination, five complications were reported by five different patients, resulting in a prosthetic success rate of 96.5%, measured at patient level. Five years after loading, mean MBL was 0.41 ± 0.30 mm (95% CI: 0.26–0.34). Difference from the one year data was 0.04 ± 0.19 mm (95% CI: 0.01–0.07). The mean ISQ value at implant placement was 71.6 ± 5.5 (range of 45–88). Six months later, the mean ISQ was 76.7 ± 4.4 (range of 66–89). The difference was statistically significant (P=0.0001). Statistically significant higher MBL was found for smokers, and patient with thin gingival biotype. Conclusions: High implant survival and success rates could be expected with stable marginal bone remodeling up to five years after loading. Smoking and thin tissue biotype were the most important variabilities associated with higher MBL. Further research are needed to confirm these results.

The effective management of Fusarium wilt of bananas (FW) depends on the knowledge of the disease dynamics in time and space. The objectives of this work were: To estimate disease intensity and impact, and to investigate the spatial and temporal dynamic of FW. Fields planted with Silk (n = 10), Pome (n = 17) or Cavendish (n = 3) banana subgroups were surveyed in Brazil, totaling 95 ha. In each field, all plants were visually assessed and diseased plants were georeferenced. The incidence of FW and the impact of the disease on yield on a regional scale were estimated. Spatial patterns were analyzed using quadrat- and distance-based methods. FW incidence ranged from 0.09 to 41.42%, being higher in Silk fields (median = 14.26%). Impacts of epidemics on yield ranged from 18.4 to 8,192.5 kg.ha-1.year-1, with a median of 935.2 kg.ha-1.year-1. The higher economic impact of the disease was observed on Silk cultivar with a median loss of US$ 910.5 ha-1.year-1. Overall, estimated losses increased on average by US$ 109.8 ha-1.year-1 at each 1% of incidence. Aggregation of FW was detected by all analytical methods in 13 fields (1 of Cavendish, 11 of Pome and 1 of Silk). In the other 17 fields, at least one analytical method did not reject the null hypothesis of randomness. One field (5 ha), composed of six plots, was selected for spatial and temporal studies during two years with bi-monthly assessments. A sigmoidal curve represented the FW progress and the Gompertz model best fitted disease progress. The level of aggregation varied over time, and evidence of secondary infection to neighboring and distant plants were detected. FW is a widespread problem in Brazil and yield losses can be of high magnitude. Epidemiology-based management strategies can now be better established.

The use of whole-body vibration (WBV) for therapeutic purposes is far from being standardized and only very recently an empirical foundation for reporting guidelines for human WBV studies has been published. Controversies about safety and therapeutic dosage stll exist. The present study aimed to investigate the metabolic and mechanical effects of low-intensity WBV in according to the ISO 2631 norm on subjects with obesity. 41 obese subjects (BMI≥ 35 kg/mˆ2) were recruited to participate in a 3-week multidisciplinary inpatient rehabilitation program including fitness training and WBV training. During WBV the posture was monitored with an optoelectronic system with 6 infrared cameras (Vicon, Vicon Motion System, Oxford, UK). The primary endpoints were: variation in body composition, factors of the metabolic syndrome, functional activity (sit-to-stand and 6-min walking test), muscle strength, and quality of life. Secondary endpoints were: modification of irisin, testosterone, growth hormone, IGF1 levels. We observed significant changes in salivary irisin levels, Group 2 (p&lt;0.01) as compared to the control group, while muscle strength, function, and other metabolic and hormonal factors did not change after a 3-week low-intensity WBV training respect control group. Future studies are needed to deeper investigate the potential metabolic effect of low-intensity WBV in managing weight.

Aero-fuel centrifugal pumps are important power plants in aero-engines. Unlike most of the existing centrifugal pumps, a combination impeller is integrated with the pump to improve its performance. First, the critical geometrical parameters of combination impeller and volute are given. Then, the effects of combination impeller on flow characteristics inside the impeller and volute are clarified by comparing simulation results with that of the conventional impeller, where the effectiveness of selected numerical method is validated by an acceptable agreement between simulation and experiment. Finally, the experiment is performed to test the external performance of studied pump. A significant feature of this study is that the flow characteristics are significantly ameliorated by reducing the flow losses emerged in impeller inlet, impeller outlet and volute tongue. Correspondingly, the head and efficiency of combination impeller are higher with comparison to conventional impeller. Consequently, it is a promising approach in ameliorating flow field and improving external performance by applying a combination impeller to an aero-fuel centrifugal pump.

In this paper, a recent meta-heuristic optimization algorithm called the discrete-continuous hyper-spherical search algorithm is used to solve the mixed-integer nonlinear problem of soft open points (SOPs) and renewable distributed generators allocation along with new network reconfiguration methodology under different loading conditions to minimize the total power loss in balanced distribution systems. Multi-scenario studies, which aim to improve the investigation of the overall performance of the strategies, are conducted on IEEE 33-node and 83-node balanced distribution systems. The contributions of SOP losses to the total active losses, as well as the effect of increasing the number of SOPs connected to the system, are investigated to determine the real benefits gained from their allocation. The results obtained validate, with proper justifications, the effectiveness of allocating both SOPs and renewable distributed generators with the proposed network reconfiguration methodology to provide the best operation of distribution networks with minimum losses and enhanced power quality performance. It was also shown that SOPs successfully assist the growing integration plans of the renewable distributed generators units and can address issues related to voltage violations and network losses efficiently.

We develop a technique for realizing lithium niobate on insulator (LNOI) waveguides of a multi-centimeter-length with a propagation loss as low as 0.027 dB/cm. Our technique relies on patterning a chromium (Cr) thin film coated on the top surface of LNOI into a hard mask with a femtosecond laser followed by the chemo-mechanical polishing for structuring the LNOI into the waveguides. The surface roughness on the waveguides is determined to be 0.452 nm with an atomic force microscope (AFM). The approach is compatible with other surface patterning technologies such as optical and electron beam lithographies or laser direct writing, enabling high-throughput manufacturing of large-scale LNOI-based photonic integrated circuits.

Ultra-thin Fe–6.5wt.%Si ribbons with 35 μm in thickness were prepared by melt-spinning. The magnetic properties were investigated before and after annealing 1000 ºC. DC properties and low-frequency (400 Hz ~ 10 kHz) iron losses have significantly improved after heat treatment. A simplified formula based on Steinmetz law which can be used to predict the AC iron loss is presented. According to the results of some iron losses data, a simplified formula has been determined, and the extent of AC iron losses can be predicted. The results obtained from the formula predict AC iron loss to a good degree. The method developed in this work could be extended to other magnetic materials for predicting AC iron loss with greater ease.

(1) Food banks have played an important role in reducing food losses and waste and improving the food insecurity situation of vulnerable people. This study aims to conduct a systematic review of food bank evaluation studies and bring new perspectives for future research and decision-making. (2) 58 articles were selected and analyzed from a survey on the Web of Science and Science Direct Platforms. Bibliometric analyses and analyses of the evaluation methodologies used were presented. (3) The bibliometric results indicate an internationalization of the studies since 2013, with a focus on developed countries, and a direct relationship between the location of the research institutes and the location of the organizations studied. Analysis of evaluation methodologies showed that the main aspects evaluated are related to long-term impact, short-term impact and results, indicating less interest in the internal processes and activities of organizations. This result raises important questions for researchers and decision-makers: to what extent evaluation studies reflect the reality and context of a given country or region and to what extent evaluation studies reflect the management processes of food banks.

In the context of global climate change, the frequency of sudden natural disasters is increasing. Assessing traffic road damage post-disaster is crucial for emergency decision-making and disaster management. Traditional ground observation methods for evaluating traffic road damage are limited by the timeliness and coverage of data updates. Relying solely on these methods does not adequately support rapid assessment and emergency management during extreme natural disasters. Social media, a major source of big data, can effectively address these limitations by providing more timely and comprehensive disaster information. Motivated by this, we utilized multi-source heterogeneous data to assess the damage to traffic roads under extreme conditions and established a new framework for evaluating traffic roads in cities prone to flood disasters caused by rainstorms. The approach involves several steps: First, extracting the surface area affected by precipitation using a threshold method constrained by confidence intervals derived from microwave remote sensing images; Second, collecting disaster information from the Sina Weibo platform, where social media information is screened and cleaned. A quantification table for road traffic loss assessment was defined, and a social media disaster information classification model combining text convolutional neural networks and attention mechanisms was proposed (TextCNN-Attention Disaster Classification); Finally, matching traffic road information on social media with basic geographic data, visualizing the classification of traffic road disaster risk levels, and completing the assessment of traffic road disaster levels based on multi-source heterogeneous data. Using the "7.20" rainstorm event in Henan Province as an example, this study categorizes the disaster impact on traffic roads into five levels: particularly severe, severe, moderate, mild, and affected, as interpreted from remote sensing images. The evaluation framework for flood disaster traffic roads based on multi-source heterogeneous data provides important data support and methodological support for enhancing disaster management capabilities and systems.

The immune response is crucial in Pregnancy Loss (RPL), which affects 1-2% of women. In RPL, peripheral blood lymphocytes and local immune cells are activated with a concomitant decrease in the leukocyte tolerogenic response in the uterus and decidua. IL-17 plays an essential role in T cell activation, weakening tolerogenic responses of the T cells. The report aims to analyze the IL-17 genetic polymorphism, circulating IL-17 lymphocyte populations, the reaction upon lymphocyte priming, the amount of cytokine in serum, and the number of T-reg cells in a group of 50 RPL and 50 normal women from the admixed Venezuelan population. No differences were observed in the genetic polymorphisms rs2275913 and rs763780. A significant decrease (P&lt;0.001) was observed in RPL patients compared to controls in the IL-17+ cell populations CD3+, CD8+, CD56+, and CD4CD25 FoxP3, but not in the CD4IL17+ cells. The response upon cell priming was significantly decreased (P&lt;0.001) in all subpopulations of RPL as compared to controls. It is concluded that despite the increase in IL-17A in the serum of patients, the number of circulating IL-17 cells and the lymphocyte response to stimulation was significantly decreased (p&lt;0.001). No differences in the genetic polymorphism compared to controls suggest that biological factors influence IL-17 levels in RPL patients, which must be carefully studied.

This study aims to develop low-cost, eco-friendly and circular economy-compliant composite materials by creating three types of magnetorheological suspensions (MRSs) utilizing lard, carbonyl iron (CI) microparticles, and varying quantities of gelatin particles (GP). These MRSs serve as dielectric materials in cylindrical cells used to fabricate electric capacitors. The equivalent electrical capacitance (C) of these capacitors is measured under different magnetic flux densities (B≤160 mT) superimposed on a medium-frequency electric field (f = 1 kHz) over a period of 120 seconds. The results indicate that at high values of B, by increasing the GP content to 20 vol.% decreases the capacitance C up to about one order of magnitude compared to MRS without GP. From the measured data, the average values of capacitance Cm are derived, enabling the calculation of relative dielectric permittivities (ϵr′) and the dynamic viscosities (η) of the MRSs. It is demonstrated that ϵr′ and η can be adjusted by modifying the MRS composition and fine-tuned through the magnetic flux density B. A theoretical model based on the theory of dipolar approximations is used to show that ϵr′, η and the magnetodielectric effect can be coarsely adjusted through the composition of MRSs and finely adjusted through the values B of the magnetic flux density. The ability to fine-tune these properties highlights the versatility of these materials, making them suitable for applications in various industries, including electronics, automotive and aerospace.

According to the ECCB, cancer represents the transition of a genomically damaged multicellular cell to a lower level of cell organization, controlled by the ancestral gene regulatory network (GRN) from the ancestral compartment of human and metazoan genomes. Cancer adopts ancient mechanisms and rules of the common ancestor, similar to those observed in parasitic amoebae. In cancer, the productive cell line generating CSCs is a non-gametogenic cancer germline. This germline proliferates through asymmetric cell division (ACD phenotype). CSCs lack proliferative capacity; they persist in hypoxic niches in a quiescent cell state or transition to an amplifying cell state that performs cyst-like polyploidization cycles, giving rise to precursors and CSCs capable of differentiation. Malignization arises from genomically dysfunctional tetraploid germline cells (DSCD phenotype) that proliferate in a precancerous stage through symmetric cell cycles. DSCD progeny undergo homotypic fusion, forming multinucleated genome repair syncytia (MGRS pathway) driving carcinogenesis. During tumorigenesis, metastasis, and recurrence, subsequent germline clones initiate a cascade of increasingly pathogenic CSCs through mechanisms such as heterotypic cell fusion, soma-to-germ transition, and polyploid giant cell structures (PGCCs). Irradiation and chemotherapies drive some of the very few surviving but dysfunctional CSCs through a PGCC repair pathway homologous to the MGRS pathway of carcinogenesis. The large number of PGCCs during metastasis and recurrence results from the perpetual germline cell damage and CSC poverty induced by oxygen levels above 6.0% O2 (germline hyperoxia).

Real-time object detection remains a pivotal topic in the realm of computer vision. Balancing the accuracy and speed of object detectors poses a formidable challenge for both academic researchers and industry practitioners. While recent transformer-based models have showncase the prowess of the attention mechanism, delivering remarkable performance improvements over CNNs, their computational demands can hinder their effectiveness in real-time detection tasks. In this paper, we elect to use YOLOX as our robust starting point and introduce a series of effective enhancements, culminating in a new high-performance detector named YOLOAX. To further exploit the power of the attention mechanism, we devise multi-dimensional attention-based modules that activate CNNs, emphasizing the most pertinent regions and bolstering the capacity to learn the most informative image representations from feature maps. Moreover, we introduce a novel leading label assignment strategy called STA, along with a groundbreaking loss function named GEIOU Loss, to further refine our detector's performance. We provide extensive ablation studies on the COCO and PASCAL VOC 2012 detection datasets to validate our proposed methods. Remarkably, our YOLOAX is trained solely on the MS-COCO dataset from scratch, without leveraging any prior knowledge, which achieves an impressive 54.2% AP on the COCO 2017 test set while maintaining a real-time speed of 72.3 fps, surpassing YOLOX by a significant margin of 3.0% AP. Our source code and pre-trained models are openly accessible at https://github.com/KejianXu/yoloax.

Maize is the staple cereal in Malawi, with a daily per capita consumption of 383g (dry matter basis), primarily consumed as dehulled maize flour used to cook nsima, a thick porridge. However, the extent of mass and nutrient loss during dehulling remains unclear in this food-insecure country, where the household maize harvest typically lasts only 6–7 months. In the current study, a milling experiment to determine yield and micronutrient losses was conducted. Milling batches (30 kg) of four maize grain varieties were dehulled at three abrasive disk dehullers under controlled conditions. Mass losses ranged from 18.8% to 42.7%, with a mean of 28.2±5.7%. Maize variety and dehuller significantly affected mass loss (p&lt;0.05). Initial protein, iron, and zinc concentrations were 8.8 ±1.0 g/100g, 20.5±2.0 µg/g, and 18.2 ±2.6 µg/g, respectively. Post-dehulling nutrient true retention varied for protein (49.7% to 75.6%, mean=64.7±7.0%), iron (18.7% to 71.6%, mean=37.6±12.0 %), and zinc (11.0% to 46.2%, mean=27.9±8.7 %). Maize variety significantly influenced mass and protein loss (p &lt; 0.05), while dehuller influenced mass, iron, and zinc losses. However, no significant difference (p &gt; 0.05) was found in the interaction between dehullers and variety on mass and nutrient losses, respectively. Given Malawi's precarious food insecurity situation, transitioning from dehulled maize flour nsima to whole maize flour or less refined nsima, is imperative. Our study findings can have food and nutritional savings for other southern Africa countries where the dehulling practice is rampant.

In the context of the Lubumbashi Coal Production Basin (LCPB), the socio-economic repercussions of the COVID-19 pandemic have exacerbated pressures on populations dependent on forest resources for their subsistence. This study employs a comprehensive methodological approach, integrating advanced remote sensing techniques, including image classification, mapping, and detailed landscape analysis, to quantify alterations in forest cover within the LCPB during the pandemic period. Our findings reveal a consistent trend of declining forested area, characterized by processes of attrition and fragmentation observed throughout various study phases, spanning from May 2019 to November 2023. This reduction in forest cover, notably more pronounced in the vicinity of Lubumbashi city and the northern zone of the LCPB, proved to be less pronounced between November 2019 and September 2020, underscoring the influence of COVID-19 pandemic-induced confinement measures on forest management practices in the region. However, subsequent to this period of restriction, deforestation activity intensified, leading to significant landscape transformations within the LCPB, primarily attributable to expanded human activities, consequently resulting in a notable decrease in the proportion of land occupied by these natural ecosystems. Consequently, the size of the largest forest patch declined substantially, decreasing from 14.62% to 8.20% between May 2019 and November 2023, thereby fostering a heightened density of forest edges over time. Our findings provide a significant contribution to understanding the complex interactions between the COVID-19 pandemic and deforestation phenomena, emphasizing the urgent need to adopt adaptive management strategies and appropriate conservation measures in response to current economic challenges.

This paper studies the maximum reliability of multi-hop relay UAV, in which UAV provides wireless services for remote users without direct communication link on the ground as a coded cooperative relay. In this paper, the analytical expressions of total power loss and total bit error rate are derived as reliability measures. Firstly, based on the environmental statistical parameters, a LOS probability model is proposed. Then the problem of minimizing the bit error rate of static and mobile UAVs is studied. The goal is to minimize the total bit error rate by jointly optimizing the height, elevation, power and path loss, and subject to the maximum allowable path loss con-straints, transmission power allocation constraints and UAV height and elevation constraints. At the same time the total path loss is minimized to achieve maximum ground communication cov-erage. However, the formulated joint optimization problem is non-convex and generally difficult to solve. Therefore, we decomposed the problem into two subproblems and proposed an effective joint optimization iteration algorithm. Finally, the simulation results are given, and the analysis shows that the optimal height of different reliability measures is slightly different, and using the mobility of UAVs can improve the reliability of communication performance.

The study delves into the critical examination of the Size of Loss distribution patterns in the context of auto insurance during pre- and post-pandemics, emphasizing their profound influence on insurance pricing and regulatory frameworks. Through a comprehensive analysis of the historical Size of Loss data, insurers and regulators gain essential insights into the probabilities and magnitudes of insurance claims, informing the determination of precise insurance premiums and the management of case reserving. This approach aids in fostering fair competition, ensuring equitable premium rates, and preventing discriminatory pricing practices, thereby promoting a balanced insurance landscape. The research further investigates the transformative impact of the COVID-19 pandemic on these Size of Loss patterns, given the substantial shifts in driving behaviors and risk landscapes. Also, the research contributes to the literature by addressing the need for more studies focusing on the implications of the COVID-19 pandemic on pre- and post-pandemic auto insurance loss patterns, thus offering a holistic perspective encompassing both insurance pricing and regulatory dimensions.

Background: One of the most astounding discoveries of recent times is the recognition that cancer embodies a transition from a higher level of metazoan cell organization to a more foundational pre-metazoic state. This shift is steered by genes housed within the ancestral genome compartment, pervasive across all metazoan genomes, encompassing humans, and governed by a pre-metazoic gene regulatory mechanism (aGRN). This work aims to highlight the emerging field of evolutionary cancer cell biology (ECCB), which points to the deep homology between cancer and protist life cycles tracing back to the common ancestor of amoebozoans, metazoans, and fungi (AMF). The ECCB analysis reveals the essence of the non-gametogenic germline of the AMF ancestor, which serves as a blueprint for all metazoan germlines and stem cell lineages and controls the life cycle of cancer. Every germ and stem cell lineage of humans and metazoans traces its lineage back to this Urgermline, transmitting crucial processes such as asymmetric cell cycling, differentiation, stemness, and phenomena like GST and SGT (aka EMT and MET) to their subsequent evolutionary descendants. Oxygen-sensitive germline and stem cells suffer DNA-DSB due to stress and oxygen ranges reminiscent of ancestral hyperoxia, leading to cell senescence. Cells that can overcome senescence can proliferate as DSCD cells with defective symmetric cell division, paving the way for malignancy and PGCC cancers. Conclusions: Understanding cancer from its evolutionary origins may help break some of the logjams in cancer prevention and open up new therapeutic pathways.

Under high-frequency operating conditions, the high-speed solenoid valve (HSV) experiences energy loss and heat generation, which significantly impact its operational lifetime. Reducing the energy loss of HSV without compromising its opening response characteristics poses a significant challenge. To address this issue, a finite element simulation model of HSV coupled with a current feedback model is constructed to investigate the synergistic effects of dynamic response and energy loss. Predictive models for the opening response time, HSV driving energy, and Joule energy using Back Propagation neural network (BPNN) are established. Furthermore, a multi-objective optimization study on the current driving strategy using Non-dominated Sorting Genetic Algorithm II (NSGA-II) is conducted. After optimization, although there was a 6.24% increase in the opening response time, both HSV drive energy and Joule energy were significantly reduced by 15.67% and 22.49%, respectively. The proposed multi-objective optimization method for HSV driving strategy holds great significance in improving its working durability.

The advent of zirconia ceramics with excellent mechanical, biomechanical and optical properties has made it an attractive metal-free substitute for titanium implants. Both animal and human studies have documented shortcomings with titanium implants. A review of the current literature on 3 iterations of zirconia implant designs has been challenging due to heterogeneous success data and limited follow-up. Zirconia implants hold promise for a new generation of dental implants, but technical developments are needed for design and material enhancements that will need to be validated by long-term rigorous studies.

Facial expression recognition is crucial for understanding human emotions and nonverbal communication. With the growing prevalence of facial recognition technology and its various applications, accurate and efficient facial expression recognition has become a significant research area. However, most previous methods have focused on designing unique deep-learning architectures while overlooking the loss function. This study presents a new loss function that allows simultaneous consideration of inter- and intra-class variations to be applied to CNN architecture for facial expression recognition. More concretely, this loss function reduces the intra-class variations by minimizing the distances between the deep features and their corresponding class centers. It also increases the inter-class variations by maximizing the distances between deep features and their non-corresponding class centers, and the distances between different class centers. Numerical results from several benchmark facial expression databases, such as Cohn-Kanade Plus, Oulu-Casia, MMI, and FER2013, are provided to prove the capability of the proposed loss function compared with existing ones.

Soiling accumulated on a photovoltaic (PV) module can significantly reduce the transmittance of the cover glass, resulting in power losses and consequent economic losses. Natural atmospheric parameters influence the accumulation of soiling at the various geographic locations. In this paper, the approaches and outcomes of the research studies on either indoor (simulator-based) or outdoor (field-based) PV soiling have been thoroughly reviewed. Different parameters depicted for the power loss of PV modules are analyzed individually and presented. Moreover, this study delves into a detailed examination of the key factors influencing dust depositions on PV modules in various geographical regions, with a particular focus on their relationship with climatic conditions. This way, probable future research directions to quantify soiling losses are identified. In addition, different loss prevention and mitigation techniques are also reviewed. This makes it possible to highlight effective strategies and pinpoint potential future research lines in these areas.

At present Coronavirus disease-2019 (COVID-19) is one of the leading contributing factor to mortality and the impact of the severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) infection on the sinonasal tract has become more prominent, particularly with the rising awareness of olfactory dysfunction (OD). We extracted data from published papers available in electronic databases (Wiley online library, PubMed, and Nature). We used the following search terms alone or with combinations - Olfactory dysfunction, SARS-CoV-2, mechanism and treatments. We found worldwide up to 98% of patients confirmed OD due to COVID-19. Current studies have implied that regardless of the high self-reported recovery rate, 25–40% of patients after 1 or 2 months and approximately 15%–28% of patients at six months struggle to fully restore their sense of smell. Moreover, female sex, younger and older age, active smoking, and chronic lung disease are reported as the associated risk factors of OD. Although the pathophysiological mechanism of action(s) of the OD is yet to be explored in depth, central nervous system (CNS) entrance, olfactory bulb (OB) and sustentacular cell damage, neural routes inflammation, non-neuronal cells damage, decreased OB volume and deregulation of olfactory receptor genes are among the commonly reported mechanisms for the development of OD.

The study presented here, through the use of GIS and physical variables, generate a new meth-odology for the calculation of erosivity (Factor R) for the qualitative evaluation of soil loss po-tential (laminar erosion) in the Northwest margin of the municipality of São Francisco, mostly located in the Pardo-MG river basin. The results obtained were statistically correct when com-pared to the traditional R calculation and the laminar erosion methodology. It is worth noting that the new proposal presented here indicated sites of qualitative loss of soil in the same places where there are closed-loop satellite signals of degraded Cerrado, something not identified in the traditional model. As conclusion it can be said that the obtained results were extremely sat-isfactory, being advised more studies to verify this new method proposed here in more places beyond the study area elaborated here

To address the problems of poor recognition, low detection accuracy, a large number of model parameters and computation, complex network structure, and unfavorable portability to embedded devices in traditional tennis ball detection algorithms, this study proposes a lightweight tennis ball detection algorithm YOLOv5s-Z based on Robomater EP. The main work is as follows: Firstly, constructing lightweight G-Backbone and G-Neck network layers to reduce the number of parameters and computation of the network structure. Secondly, the convolutional coordinate attention is incorporated in G-Backbnone to embed the location information into the channel attention, which makes the network obtain the location information in a larger area through multiple convolutions and enhances the expression ability of the mobile network learning features. In addition, the Concat module in the original feature fusion is modified into a weighted bi-directional feature pyramid W-BiFPN with settable learning weights to improve the feature fusion capability and achieve efficient weighted feature fusion and bi-directional cross-scale connectivity. The EIOU loss is introduced to split the influence factor of aspect ratio and calculate the length and width of the target frame and anchor frame respectively, combined with Focal-EIOU Loss to solve the problem of imbalance between difficult and easy samples. The activation function Meta-ACON is introduced to achieve an adaptive selection of whether to activate the neurons and improve the detection accuracy. Finally, the experimental results show that compared with the original algorithm, the YOLOv5s-Z algorithm reduces the number of parameters and computation by 42$\%$ and 44$\%$, the model size by 39$\%$, and 2$\%$ improvement in average accuracy mean value, which verifies the effectiveness of the improved algorithm and the light weight of the model to meet the deployment requirements of embedded devices, and adapts Robomaster EP for accurate detection and real-time recognition of tennis balls.

Controlled drainage (CD) is an important agricultural measure for maintaining soil moisture and nutrients, controlling groundwater level, and increasing crop yield. In arid regions, CD can be used to improve the water supply in agriculture and reduce environmental pollution. In this study, we investigated the effect of CD, including a drainage depth of 40 cm (CWT1) and 70 cm (CWT2) during the plant growth period, free drainage (FD), and open ditch drainage (OD) on the migration of water, nutrients, and salts in the soil; the dynamics of groundwater level; the loss of soil nitrogen; and the growth of oilseed sunflower plants. Compared with FD, CD increased the water and nutrient content in the soil, reduced nitrogen loss, and enhanced the ability of the soil to continuously supply nitrogen to the oilseed sunflower plants, which benefited plant growth at later growth stages and reduced environmental pollution. During the period between irrigation at the budding stage and harvest stage, the average soil water content in the 0–20 cm soil layer in CWT1 increased by 3.67%, 4.78%, and 0.55%, respectively, compared with that in CWT2, FD, and OD. The soil mineral content in CWT1 was 25.17%, 35.05%, and 17.78% higher than that in CWT2, FD, and OD, respectively, indicating that higher soil salinity occurred at the later stage of plant growth in CWT1, which actually had little effect on the plants due to their enhanced salt tolerance and increased need for water and nutrients at that stage. In addition, CD delayed the decline in groundwater level, which allowed the plants to use groundwater at later growth stages, and as a result the yield and water use efficiency were improved. CWT1 significantly increased oilseed sunflower yield by 4.52–11.14% and increased water use efficiency by 1.16–10.8%. Moreover, CWT1 also increased the survival rate of the oilseed sunflower plants by 2.62–2.92%, and the plants demonstrated good growth. Therefore, under CD conditions, plants used soil water and nitrogen more efficiently and, as a result, their productivity was increased, and the water quality was improved.

The implementation of One Health/EcoHealth/Planetary Health approaches has been identified as key (i) to address the strong interconnections between risk for pandemics, climate change and biodiversity loss, and (ii) to develop and implement solutions to these interlinked crises. As a response to the multiple calls of scientists in that direction, we have put forward seven long term research questions regarding COVID-19 and emerging infectious diseases (EIDs) that are based on an effective integration of environmental, ecological, evolutionary, and social sciences to better anticipate and mitigate EIDs. Research needs cover the social-ecology of infectious disease agents, their evolution, the determinants of susceptibility of humans and animals to infections, and the human and ecological factors accelerating infectious disease emergence. For comprehensive investigation, they include the development of nature-based solutions to interlinked global planetary crises, addressing ethical and philosophical questions regarding the relationship of humans to nature and regarding transformative changes to safeguard the environment and human health. In support of this research, we propose the implementation of innovative multidisciplinary facilities embedded in social-ecosystems locally: the “ecological health observatories” and the “living laboratories”. This work has been carried out in the frame of the EC project HERA (www.HERAresearchEU.eu) that aims to set the priorities for an environment, climate and health research agenda in the EU by adopting a systemic approach in the face of global environmental change.

In recent years in Bangladesh, there has been regular cyclonic event, flooding and erratic pre-monsoons precipitation that has hampered production greatly and forced Bangladesh to import salt from abroad to manage market deficiency. There is much uncertainty about the effects of climate change on the frequency and intensity of small-scale, sudden onset weather phenomena such as heavy rainfall and subsequent loss and damage (L&D). But, several studies indicate that an obvious strong relationship exists between irregular rainfall and associated L&D. Nowadays, severe changing rainfall patterns are observed in Bangladesh, which is rapid-onset in nature, but low exposed in terms of response. The current study explored a ‘double-exposed’ burden combined of both climatic (e.g., uneven rainfall) and non-climatic governance factors (e.g., imperfect trade policy, the absence of risk transfer mechanisms) which are hindering salt production and pushing the country from the aspiration of salt exporting to the net buyer. This chapter mainly assesses the impacts of L&D due to climatic events that are causing overwhelming effects on the well-being of marginal salt farmers at Kutubdia Upazila of Bangladesh. Data were mainly collected through Participatory Vulnerability Analysis (PVA), Key informant interviews (KII), and Sample Surveys (SS). This study would provide insights for improved disaster management policy and an appropriate adaptive measure to address such extreme events as well as to initiate a further study for understanding the nexus of ‘nature and market’ in building resilience among the marginal salt farmers.

Annotating training data is a time consuming and labor intensive process in deep learning, especially for images with many objects present. In this paper, we propose a method to allow deep networks to be trained on data with reduced numbers of annotations (per image) in heatmap regression tasks (e.g. object detection and counting), by applying an asymmetric loss function. In a real scenario, this reduction of annotations can be imposed by the researchers (e.g. ask the annotators to label only 50% of what they see in each image), or can potentially counteract unintentionally missing labels from the annotators. To demonstrate the effectiveness of our method, we conduct experiments in two domains, crowd counting and wheat spikelet detection, using different deep network architecture. We drop various percentages of instance annotations per image in training. Results show that an asymmetric loss function is effective across different models and datasets, even in very extreme cases with limited annotations provided (e.g. 90% of the original annotations reduced). Whilst tuning of the key parameters are required, we find that setting conservative parameter values can help more realistic situations, where only small amounts of data have been missed by annotators.

At present, the world is now passing a very far different time than normal situation due to the COVID-19 pandemic crisis. The global life-style and human civilization is currently progressing with down-stream that affecting almost every sectors necessary for human civilizations except the current environmental situation. To control the COVID-19 spreading, most of the countries are following lockdown process that reduces human mobility, thus reducing the CO2 emission to the environment. Though the COVID-19 pandemic is a blessing for the present environment, however, the post-COVID world will face a massive thrust of energy and only conventional energy resources may not be enough to mitigate the energy demands. Solar power generation technology mainly the photovoltaic (PV) systems and their advancement can be the leading possibilities to minimize the gap between the power demand and generation. It is now time to think how we can improve the PV power generation in future and the post-COVID world. In this encyclopaedia communication, we report on Nano-technological approach to improve the conversion efficiency of GaAs solar cells. We have designed and optimized several types of nano-structured assemblies that can be implemented to reduce the front surface incident light reflection losses thus can assist to improve the conversion efficiency of GaAs solar cells.

Early detection, isolation, and management of COVID-19 patients are crucial to contain the current pandemic. The CDC in USA recently included "sudden loss of taste (dysgeusia/ageusia) and smell (anosmia/hyposmia)” as symptoms of COVID-19. If these symptoms are reliable forerunner symptoms of COVID-19, then it may facilitate early detection and containment of the disease. Hence, we systematically evaluated the contemporary evidence on dysgeusia and anosmia as trigger symptoms in COVID-19. Ovid MEDLINE, EBSCO host, and Web of Science databases were searched between December 25, 2019-May 30, 2020.Of the 13 identified records, eight (totaling 11,054 COVID-19 patients), were included, as per the selection criteria. The studies emanated mostly from the European community, as well as China, the USA, and Iran. In total, anosmia and dysgeusia symptoms were present in 74.9 % and 81.3% ambulatory as well as hospitalized, mild-to-severe cases of COVID-19 patients, respectively. The European, US, and Iran data indicate that olfactory, and gustatory symptoms appear prior to general COVID-19 symptoms in a majority of the patients. To our knowledge, this is the first systematic review analyzing the prevalence of chemosensory dysfunction in COVID-19. Further, studies are essential to evaluate their utility as harbingers of COVID-19 onset, and to establish clinical practice guidelines.

Underwater wireless optical communications (UWOC) have attracted considerable attention in recent years as an alternative means for acoustic communication. However, optical path loss of light propagation from attenuation is large due to absorption and scattering in various water conditions. Identification of environmental effects especially tropical storms on underwater optical path loss is the key to the success of using optics for UWOC. Underwater inherent optical properties (IOPs) such as the beam attenuation coefficient for 470 nm light in the western North Pacific Ocean were measured from the U.S. Naval Oceanographic Office sea gliders with being deployed after Super Typhoon Guchol (7-20 June 2012)‘s passage during 25-30 June 2012 and no any typhoon passage during 9 January – 28 February 2014. The observed two sets (with and without super typhoon) of IOPs are taken as input into a recently developed Radiative Transfer Equation solver. The simulated normalized received powers for the two durations show large impact of typhoon passage on UWOC.

Users of meteorological forecasts are often faced with the question of whether to make a decision now based on the current forecast or whether to wait for the next and hopefully more accurate forecast before making the decision. One would imagine that the answer to this question should depend on the extent to which there is a benefit in making the decision now rather than later, combined with an understanding of how the skill of the forecast improves, and information about the possible size and nature of forecast changes. We extend the well-known cost-loss model for forecast-based decision making to capture an idealized version of this situation. We find that within this extended cost-loss model, the question of whether to decide now or wait depends on two specific aspects of the forecast, both of which involve probabilities of probabilities. For the special case of weather and climate forecasts in the form of normal distributions we derive a simulation algorithm, and equivalent analytical expressions, for calculating these two probabilities. We apply the algorithm to forecasts of temperature and find that the algorithm leads to better decisions relative to three simpler alternative decision-making schemes. Similar problems have been studied in many other fields, and we explore some of the connections.

This paper focuses on the non-destructive dielectric measurement for low-loss planar materials with a thickness of less than 3 mm using a large coaxial probe with an outer diameter of 48 mm. The aperture probe calibration procedure required only to make a measurement of the half-space air and three offset shorts. The reflection coefficient for the thin material is measured using a Keysight E5071C network analyzer from 0.3 MHz to 650 MHz and then converted to a relative dielectric constant and tangent loss via closed form capacitance model and lift-off calibration process. Measurement error of dielectric constant, Δε_r is less than 2.5 % from 1 MHz to 400 MHz and the resolution of loss tangent, tan δ measurement is capable of achieving 3×10^-3.

Normally, the Nernst voltage calculated from the concentration of the reaction gas in the flow channel is considered to be the ideal voltage (reversible voltage) of the oxyhydrogen fuel cell, but actually it will cause a concentration gradient when the reaction gas flows from the flow channel through the gas diffusion layer to the catalyst layer. The Nernst voltage loss in fuel cells in most of the current literature is thought to be due to the difference in concentration of reaction gas in the flow channel and concentration of reaction gas on the catalyst layer at the time when the high net current density is generated. Based on the Butler-Volmer equation in oxyhydrogen fuel cell, this paper demonstrates that the Nernst voltage loss is caused by the concentration difference of reaction gas in flow channel and on the catalytic layer at the time when equilibrium potential (Galvanic potential) of each electrode is generated.

Integrated ultra-low-loss waveguides are highly desired for integrated photonics to enable applications that require long delay lines, high-Q resonators, narrow filters, etc. Here we present an ultra-low-loss silicon waveguide on 500 nm thick SOI platform. Meter-scale delay lines, million-Q resonators and tens of picometer bandwidth grating filters are experimentally demonstrated. We design a low-loss low-reflection taper to seamlessly integrate the ultra-low-loss waveguide with standard heterogeneous Si/III-V integrated photonics platform to allow realization of high-performance photonic devices such as ultra-low-noise lasers and optical gyroscopes.

Load balancing, energy efficiency and fault tolerance are among the most important data dissemination issues in Wireless Sensor Networks (WSNs). In order to successfully cope with the mentioned issues, two main approaches (namely, Data-centric Storage and Distributed Data Storage) have been proposed in the literature. Both approaches suffer from data loss due to memory and/or energy depletion in the storage nodes. Even though several techniques have been proposed so far to overcome the mentioned problems, the proposed solutions typically focus on one issue at a time. In this paper, we integrate the Data-centric Storage (DCS) features into Distributed Data Storage (DDS) mechanisms and present a novel approach, denoted as Collaborative Memory and Energy Management (CoMEM), to overcome both problems and bring memory and energy efficiency to the data loss mechanism of WSNs. We also propose analytical and simulation frameworks for performance evaluation. Our results show that the proposed method outperforms existing approaches in various WSN scenarios.

Background: Appendicular skeletal muscle (or lean) mass (ALM) estimated using dual-energy X-ray absorptiometry (DXA) is considered to be a preferred method for sarcopenia studies. However, DXA is expensive, has limited portability, and requires radiation exposure. Bioelectrical impedance analysis (BIA) is inexpensive, easy to use, and portable; thus BIA might be useful in sarcopenia investigations. However, a large variety of models have been commercially supplied by different companies, and for most consumer products, the equations estimating ALM are not disclosed. It is therefore difficult to use these equations for research purposes. In particular, the BIA equation is often age-dependent, which leads to fundamental difficulty in examining age-related ALM loss. The aims of the current study were as follows: (1) to develop and validate an equation to estimate ALM using multi-frequency BIA (MF-BIA) based on theoretical models, and (2) to establish sarcopenia cutoff values using the equation for the Japanese population. Methods: We measured height (Ht), weight, and ALM obtained using DXA and a standing-posture 8-electrode MF-BIA (5, 50, 250 kHz) in 756 Japanese individuals aged 18 to 86-years-old (222 men and 301 women as developing equation group and 97 men and 136 women as a cross validation group). The traditional impedance index (Ht²/Z₅₀) and impedance ratio of high and low frequency (Z₂₅₀/Z₅) of hand to foot values were calculated. Multiple regression analyses were conducted with ALM as dependent variable in men and women separately. Results: We created the following equations: ALM = (0.6947 × (Ht²/Z₅₀)) + (−55.24 × (Z₂₅₀/Z₅)) + (−10,940 × (1/Z₅₀)) + 51.33 for men, and ALM = (0.6144 × (Ht²/Z₅₀)) + (−36.61 × (Z₂₅₀/Z₅)) + (−9332 × (1/Z₅₀)) + 37.91 for women. Additionally, we conducted measurements in 1624 men and 1368 women aged 18 to 40 years to establish sarcopenia cutoff values in the Japanese population. The mean values minus 2 standard deviations of the skeletal muscle mass index (ALM/Ht²) in these participants were 6.8 and 5.7 kg/m² in men and women, respectively. Conclusion: The current study established and validated a theoretical and age-independent equation using MF-BIA to estimate ALM and provided reasonable sarcopenia cutoff values.

This work investigated the isothermal holding time dependence of the densification, microstructure, weight loss and tensile properties of Fe-Mn-Si powder compacts. Elemental Fe, Mn and Si powder mixtures with a nominal composition of Fe-28Mn-3Si (in weight percent) were ball milled for 5h and subsequently pressed under a uniaxial pressure of 400 MPa. The compacted Fe-Mn-Si powder mixtures were sintered at 1200 ℃ for 0, 1, 2 and 3 h, respectively. In general, the density, weight loss and tensile properties increased with the increase of isothermal holding time. A significant increase in density, weight loss and tensile properties occurred in the compacts isothermally holding for 1 h, as compared to those with no isothermal holding. However, further extension of isothermal holding time (2 and 3 h) only played a limited role in promoting the density and tensile properties. The weight loss of the sintered compacts was mianly caused by the sublimation of Mn in Mn depletion region on the surface layer of the sintered Fe-Mn-Si compacts. The length of the Mn depletion region increased as isothermal holding time increased. A single α-Fe phase was detected on the surface of all the sintered compacts, and the locations beyond the Mn depletion region were comprised of a dual dominant γ-austenite and minor ε-martensite.

Background/Objectives: The World Federation of the Deafblind Global Report 2023 reports that many countries do not have a comprehensive identification, assessment, and referral system for persons with deafblindness, a combination of hearing and vision loss, across all age groups and geographic regions. The scan seeks to inform researchers, policymakers, and community-based organizations about the status of and gaps in sensory healthcare initiatives in Canada, with intent to raise awareness to enhance integration and coordination of eye and ear care services. Methods: We conducted an environmental scan of Canada’s healthcare system and current public health policies addressing vision and hearing care in Canada at federal and provincial levels. The scan was conducted using published literature searches from five scientific databases – Embase, Medline, PsycINFO, PubMed and CINAHL, in combination with the grey literature review of federal, provincial, and territorial government and non-profit organizations websites during April-October 2022. Out of 1257 articles screened, 82 studies included that met the inclusion/exclusion criteria. 13 reports were included in the grey literature search. Results: Thematic findings indicate stigma and discrimination towards individuals with disabilities and marginalized groups, including hearing, vision, or dual sensory loss, persist. Barriers to vision and hearing healthcare access include inadequate policies, underinvestment in vision and/or hearing services, limited collaboration and coordinated services between hearing and vision services, discrepancies in insurance coverages, and lack of health system support. Conclusions: This scan demonstrates the persistent barriers to vision and/or hearing services present in Canada, stemming from inadequate policy and limited-service coordination. Future work to address gaps, evaluate public education, and develop integrated sensory health care initiatives to enhance coordinate eye and ear care services as recommended in WHO Report on Hearing and Vision is imperative.

This study presents a novel statistical framework for evaluating the social and economic impact of delays in the reimbursement of innovative medicines. With the growing importance of timely access to advanced therapies, particularly in managing chronic diseases, we develop a model that quantifies social loss in terms of life years, productivity, productivity cost and overall well-being. The framework integrates several key factors, including years of life lost, years of potential productive life lost, deaths, delays in reimbursement, and cost of labor productivity losses. By providing a comprehensive assessment of the societal costs associated with delayed access, the model offers valuable insights for policymakers seeking to balance healthcare innovation with sustainability. The results emphasize the need for efficient pharmaceutical policies that reduce delays in access to innovative treatments, promote equity in healthcare, and ensure long-term system viability. This approach has broad implications for improving health outcomes and economic productivity, particularly in publicly funded healthcare systems.

Tailored Skincare and Wellness Solutions for HIV-Positive Individuals: Addressing Skin Conditions, Joint Pains, and Memory Loss. Research Topic This research aims to explore tailored skincare and wellness solutions for HIV-positive individuals, specifically focusing on addressing skin conditions, joint pains, and memory loss. The research question revolves around developing innovative and effective medical approaches to improve the quality of life for this population. Research Importance The topic is crucial as it addresses the unique challenges faced by HIV-positive individuals, highlighting the need for tailored healthcare solutions. By understanding and addressing the physical symptoms associated with HIV, such as skin conditions, joint pains, and memory loss, the research contributes to enhancing the overall well-being and quality of life of individuals living with HIV. Research Method The research encompasses a comprehensive analysis of existing literature, including studies on dermatological problems, musculoskeletal issues, and cognitive impairments in HIV-positive individuals. Additionally, the development of a proposed skincare and serum line, RadientResilience, is based on a careful consideration of pharmacological effects and the unique skin conditions of this population. Research Findings The research findings emphasize the prevalence of dermatological conditions as a significant marker for HIV in affected populations. Furthermore, the study highlights the importance of thorough clinical assessment and the potential use of specific compounds and ingredients to alleviate joint discomfort in HIV-positive individuals. Research Conclusions The interpretations and conclusions drawn from the research underscore the need for tailored medical approaches to address the unique healthcare needs of HIV-positive individuals. The proposed skincare and serum line, RadientResilience, represents an innovative and empowering solution providing effective care for this targeted audience. Research Implications The research has implications for the development of specialized skincare and wellness products tailored to address the specific needs of HIV-positive individuals. Potential challenges in developing and implementing tailored skincare and wellness solutions for HIV-positive people include stigma and discrimination, as well as logistical and financial constraints. As Bouabida, Chaves, and Anane (2023) noted, “Stigma and discrimination are major barriers to HIV care engagement and adherence” (Challenges and barriers to HIV care engagement and care cascade: viewpoint, para. 3). Additionally, the authors highlight that “logistical and financial constraints can limit access to necessary healthcare services” (para. 5). Logistical and financial constraints can limit access to necessary healthcare services for individuals living with HIV by creating barriers such as transportation challenges, limited availability of healthcare professionals, and financial strain related to medical expenses.

Micro-invasive therapeutic approaches in endodontics differentiate between different modified types of access cavities: occlusal via a smaller occlusal opening (15 ° access angle), medial (via the caries defect) for premolars and molars (30 ° access angle) and cervical with wedge-shaped defects or root caries on anterior teeth and single-rooted premolars (45 ° access angle). Therefore, the aim of this work was (i) to create an in-vitro model for the clinical simulation of these three different modified access types, (ii) to assess the biomechanics of the instrumentation and (iii) to measure the volumetric substance loss of four different preparation systems. Material and Method: Simulated S-shaped root canals with a high degree of obliteration (ISO 10) in acrylic polymer bodies with canal entrance angles of 15 °, 30 ° and 45 ° were shaped with NaOCl (3%) irrigation under clinical simulation at body temperature (37 ° C) in randomized blinded sequences (n = 7) according to manufacturer's instructions: 1. Conventional geometry, not heat treated, up to 35 / .04 (F360, Komet) 2. Conventional geometry, heat-treated, spark-eroded up to 40 / .04 (Hyflex EDM, Coltene Hyflex) 3. Spiral geometry, heat treated, up to 36 / .03 (TruNatomy, DentsplySirona) 4. Distinctive spiral geometry, heat-treated (XP-Endo Shaper, FKG) The vectorization (AutoCAD) of the root canals was performed before and after preparation in the apical, middle and coronal third of the root canal. The volumetric loss of substance in cubic millimeters was recorded and statistically evaluated using an independent two-sided t-test. Clinical demonstrations include three cases of micro-invasive access cavities as final proof of principle of fast and safe root canal treatment. Results The total loss of volume at 15 ° entry angles is significantly lowest with TruNatomy and XP Endo. With an access angle of 30 °, the total loss remains low and increases with F360 and Hyflex .. At a 45 ° access angle, the group differences remain: TruNatomy (6.5 mm3) and XP Endo (6.4 mm3) versus F360 (8.3 mm3) and Hyflex (8.4 mm3). This difference in loss of simulated root dentin is highly significant. Conclusions Conventional instruments achieve optimal shape of apical third of root canals at all entrance angles only with higher substance loss in coronal and middle thirds . In contrast, the spiral instrument geometry contributes to dentin protection and supports the concept of minimally invasive endodontics for lifelong tooth preservation as shown in four clinical cases.

In this work, we explore Conjecture 1 proposed in the newly released pioneering paper “Volatility transformers: an optimal transport-inspired approach to arbitrage-free shaping of implied volatility surfaces” by Zetocha Valer, which posits that the “One-X” property is both a necessary and sufficient condition for convex order between non-negative continuous strictly increasing distributions with the same mean. We provide a counterexample demonstrating that the conjecture, as originally stated, does not hold. By examining stochastic orders, particularly the increasing convex order, and the “One-X” property, we propose an enhanced version of the conjecture which is shown to be valid. Furthermore, we discuss the implications of these findings in the context of equity implied volatility fitting and the construction of implied volatility surfaces, highlighting the challenges posed by real-market conditions. In the end, we propose several applications in implied volatility surface construction or simulation.

Minimizing optical losses in resonant cavities is crucial for improving photonic device performance. This study focuses on the development of a simulation tool to analyze scattering losses in Fabry-Pérot interferometers (FPI), offering precise modeling of waveguide dynamics and contributing to accurate loss predictions across various platforms. Optical cavities often suffer from scattering losses due to surface roughness and material defects. Our approach integrates theoretical models and simulations to quantify these losses, utilizing the FPI as a model system. We identified upper and lower reflectivity thresholds, beyond which accurate measurement of losses becomes unreliable. For reflectivity below a certain threshold, measurement errors arise, while excessively high reflectivity can reduce fringe visibility and introduce detector sensitivity issues. Simulations were used to validate the model's ability to predict reflectivity and attenuation in waveguides with varying loss levels. The software’s flexibility to adjust transmission parameters for different cavity configurations enhances its utility for a broad range of photonic systems. Our study offers a novel methodology for optical loss analysis, with practical applications in optimizing photonic devices. By providing a reliable tool for precise loss measurement, this work supports advancements in optical technologies, enabling the design of more efficient, high-performance devices across various applications.

According to evolutionary cancer cell biology ECCB, cancer stem cells do not arise from normal stem cells, but rather from the functional ACD phenotype of the germline. This phenotype proliferates through asymmetric cell division, producing self-renewing cells and non-proliferating daughter cells with cancer stem cell qualities (CSCs). ECCB posits that cancer stem cells themselves do not proliferate. Similar to protists, there is a close reciprocal relationship between both sister cells that collectively form a germ and stem cell lineage. These sister cells share functional roles: the proliferating cancer germline cells generate stem cells, while the non-proliferating cancer stem cells accumulate progenitor cells for new germline clones. ECCB distinguishes between primary CSCs, which are associated with carcinogenesis and primary tumors, and secondary CSCs, which are linked to metastases. This unicellular stem cell system is homologous to that of parasitic protists, such as amoebae. Both cancer stem cells and amoebae stem cells are generated by an oxygen-sensitive germline and are vulnerable to damage when oxygen levels exceed 6.0% (germline hyperoxia). Oxygen concentrations above this threshold can damage the germline genome. Dysfunctional germline cells do not undergo senescence; instead, they continue to cycle through defective symmetric cell cycles However, to regain functionality, the germline genome requires repair by hyperpolyploid giant cells known as native PGCCs, which are homologous to the multinucleated genome repair structures MGRS found in protists. Native PGCCs differ in some respects from genotoxic-induced PGCCs

The physical properties of a structure such stiffness although can be determined by some statical tests, the identification of damping parameter requires a dynamic test. In general, both theoretical prediction and experimental identification of damping are quite difficult. There are many different techniques available for damping identification, and each method gives a different damping parameter. The dynamic indentation method, rheometry, atomic force microscopy, and resonant vibration tests are commonly used to identify the damping of materials, including soft materials. While the viscous damping ratio, loss factor, complex modulus and viscosity are quite common to describe damping of materials, there are also other parameters such as the specific damping capacity, loss angle, half-power bandwidth, and logarithmic decrement to describe damping of various materials. Often one of these parameters is measured in practical applications and the measured damping parameter needs to be converted into another damping parameter for comparison purposes. In this review, the theoretical derivations of different parameters for the description and quantification of damping and their relationships, and the methods for damping identification are presented. The expressions for both high damping and low damping are included and evaluated. This paper could be a primary resource for damping research and teaching.

This article presents the theoretical study, numerical simulation and the fabrication of a phase shifter and stub resonator in microstrip ridge gap waveguide (MGCW) technology with the use of liquid crystal (LC) in its substrate as a reconfigurable material. The phase shifter and the stub resonator are filled with LC and thanks to LC's dielectric anisotropy properties, the phase shift and resonance response can be easily controlled using an external electric or magnetic bias field. The phase shifter was designed to operate in the range of 10 to 20 GHz and the resonator was designed to operate in the range of 7.8 to 8.8 GHz. The phase shifter's insertion losses, associated with both parallel and perpendicular LC's permittivity, as well as the phase response were computed and measured. Finally, the figure of merit (FoM) was extracted. The resonator's frequency response, associated with both parallel and perpendicular LC's permittivity, was computed. The resonator's frequency responses, provided different polarization voltages, were measured and compared to the simulation results. The technological issues were discussed. The good agreement between simulation and measurement results establishes this technology as a viable approach to the development of RF reconfigurable devices.

This study constructs a comprehensive line loss management evaluation knowledge graph, considering the impact of various factors such as power grid structure characteristics, equipment's physical parameters, power grid operation characteristics, electricity consumption features, and natural conditions. It establishes the association between line loss characteristics and line loss retrieval and configures the data source for line loss management evaluation indicators. Based on Principal Component Analysis (PCA), this study selects comprehensive evaluation indicators for line loss management, verifies the rationality of the indicators, and proposes an integrated evaluation method for municipal power grid line loss management. A full-process composite evaluation method based on DEMATEL-Entropy Weight-TOPSIS is constructed, and the accuracy of the evaluation method is verified through ablation experiments. The TOPSIS analysis method is applied to empirical research on cross-sectional data from a city in Guangxi from 2012 to 2022 to validate the evaluation system's effectiveness, scientific nature, and objectivity. The case analysis shows that the line loss evaluation index system established in this paper effectively reduces the redundancy of line loss data and can objectively and rationally reflect the actual status of line loss management work, serving as a basis for decision-making in future line loss management evaluations.

Background: The term “Long COVID” is commonly used to describe persisting symptoms after acute COVID‑19. Until now, proposed mechanisms for the explanation of Long COVID have not related quantitative measurements to basic laws. In this work, a common framework for the Long COVID pathophysiological mechanism is presented, based on the blood supply deprivation and the flow diffusion equation. Methods: Case-control studies with statistically significant differences between cases (post-COVID patients) and controls, from multiple tissues and geographical areas, were gathered and tabulated. Microvascular loss (ML) was quantified by vessel density reduction (VDR), foveal avascular zone enlargement (FAZE), capillary density reduction (CDR), and percentage of perfused vessels reduction (PPVR). Both ML and hemodynamic decrease (HD), were incorporated in the tissue blood supply reduction (SR) estimation. Results: ML data were found from 763 post-COVID patients with an average VDR, FAZE, CDR, and PPVR of 16%, 31%, 14%, and 21%, respectively. The average HD from 72 post-COVID patients was 37%. The estimated SR for multiple tissues with data from 634 post-COVID patients reached a sizeable 47%. This large SR creates conditions of lower mass diffusion rates, hypoxia, and undernutrition, which at a multi-tissue level, for a long time, can explain the wide variety of the Long COVID symptoms. Conclusions: Disruption of peripheral tissue blood supply by the contribution of both ML and HD is proposed here to be the principal cause of the mechanism leading to Long COVID symptoms.

Purpose: Proximal Femur Fractures (PFFs) in elder patients lead to decreased productivity. Skilled nursing facilities (SNFs) and inpatient rehabilitation facilities (IRFs) are non-home destinations for post-discharge disposition. This study aims to evaluate the loss of independence (LOI) following PFFs and examine the economic impact it entails. Method: Literature from various databases was collected and analyzed retrospectively. The inclusion criteria included patients age >18 years and articles published after 1990. All studies were screened and a PRISMA chart was used to demonstrate the search process. 24 studies were finally used for review. Results: LOI following PFFs significantly increases with age. Fractures in geriatrics avail a significant amount of post-care resources and had longer lengths of stay. Furthermore, six pre-operative risk factors were identified for non-home disposition including age >75, female, non-Caucasian race, Medicare status, prior depression, Charlson Comorbidity Index. Patients discharged directly to home have lower total cost compared to those discharged to rehabilitation units. Loss of independence increases with advancing age. Discussion: PFFs can lead to serious loss of independence among elderly patients with direct impact on economic, social, psychological aspects and the healthcare system.

This paper proposes training improvement methods of artificial neural networks (ANN) trajectory predictors. First, a dynamic power system time-series trajectory is split into several different segments to simplify the original ANN training problem. Moreover, the time-derivative of the trajectory is included to obtain an augmented loss function. Compared to previous studies which mainly focused on increasing the prediction accuracy, the aim of these novel techniques is to reduce the computational burden where the ANN output performance is still acceptable. The effectiveness of the developed methods is validated based on the WSCC three-machine nine-bus and IEEE 39-bus system models. The mean absolute error (MAE) and trajectory prediction results are analyzed, in which the numbers of neurons, hidden layers, and training epochs are constrained during the ANN training process. Rotor-angle difference between generators and the system frequency are investigated as the dynamic trajectories of the power system models. It is revealed that when the ANN architecture and epochs are constrained, the MAE results can be reduced, and the ANN training results can better reflect the original trajectory using the improvement approaches.

The study of angular correlations of heavy-flavor particles in hadronic collisions can provide crucial insight into the heavy-quark production, showering and hadronization processes. The comparison with model predictions allows us to discriminate among different approaches for heavy-quark production and hadronization, as well as different treatments of the underlying event employed by the models to reproduce correlation observables. In ultra-relativistic heavy-ion collisions, where a deconfined state of matter, the quark-gluon plasma (QGP), is created, heavy-flavor correlations can shed light on the modification of the heavy-quark fragmentation due to interaction of charm and beauty quarks with the QGP constituents, as well as characterize their energy loss processes while traversing the medium. Insight into possible emergence of collective-like mechanisms in smaller systems, resembling those observed in heavy-ion collisions, can also be obtained by performing correlation studies in high-multiplicity proton-proton and proton-nucleus collisions. In this review, the most recent and relevant measurements of heavy-flavor correlations performed in all collision systems at the LHC and RHIC will be presented, and the new understandings that they provide will be discussed.

In the field of computational fluid dynamics (CFD) for rotorcraft, two significant challenges are resolving the complex vortex structures in rotor wakes, and representing the moving rotor blades in the ambient airflow. This study addresses the first challenge by using a third-order unstructured finite volume solver, which, compared to its second-order counterpart, has substantially lower dissipation. Consequently, even relatively coarse meshes are capable of resolving small vortices. With this background flow field solver, the second challenge is addressed by modeling each rotor as an Actuator Disk Model (ADM), or describing individual rotor blades as actuator lines, designated as the Actuator Line Model (ALM). Both of these models are equipped with an improved correction for aerodynamic losses at blade tips, which is thoroughly presented in the methodology section. The numerical experiments section centers on analyzing errors linked to various sampling approaches. Additionally, the article discusses comparisons between vortex theory and ALM, specifically regarding calculations for fixed-wing aircraft. Furthermore, high-order precision and parallel efficiency are exemplified in scenarios encompassing rotors engaged in both hovering and forward flight rotors. The results in this paper demonstrate that the combination of the ALM/ADM with the improved tip loss correction and the third-order finite volume solver presents a new way of developing efficient tools for the aerodynamic analysis of helicopter rotors.