Accurate estimation of body fat percentage is essential for various health and fitness applications. Traditional methods for measuring body fat, such as underwater weighing, can be costly and inconvenient. In this study, we apply machine learning techniques to predict body fat percentage using easily accessible body measurements and data. The results highlight the effectiveness of regression models in estimating body fat, with Linear Regression, Ridge Regression, and Bayesian Ridge models achieving R-squared scores of approximately 74%, 73%, and 73%, respectively. These models provide a practical and cost-effective solution for individuals and professionals seeking reliable body fat estimates.

With the great development of intelligent transportation systems (ITS), travel time prediction has attracted the attentions of many researchers and a large number of prediction methods have been developed. However, as an unavoidable topic, the predictability of travel time series is the basic premise for travel time prediction has received less attention than the methodology. Based on the analysis of the complexity of travel time series, this paper defines travel time predictability to express the probability of correct travel time prediction and proposes an entropy-based method to measure the upper bound of travel time predictability. Multiscale entropy is employed to quantify the complexity of travel time series, and the relationships between entropy and the upper bound of travel time predictability are presented. Empirical studies are made with vehicle trajectory data in an express road section. The effectiveness of time scales, tolerance, and series length to entropy and travel time predictability are analysis, and some valuable suggestions about the accuracy of travel time predictability are discussed. Finally, the comparisons between travel time predictability and actual prediction results from two prediction models, ARIMA and BPNN, are conducted. Experimental results demonstrate the validity and reliability of the proposed travel time predictability.

The paper presents the design and the implementation of different advanced control strategies that are applied to a nonlinear model of a thermal unit. A data–driven grey–box identification approach provided the physically meaningful nonlinear continuous–time model, which represents the benchmark exploited in this work. The control problem of this thermal unit is important since it constitutes the key element of passive air conditioning systems. The advanced control schemes analysed in this paper are used to regulate the outflow air temperature of the thermal unit by exploiting the inflow air speed, whilst the inflow air temperature is considered as an external disturbance. The reliability and robustness issues of the suggested control methodologies are verified with a Monte–Carlo analysis for simulating modelling uncertainty, disturbance and measurement errors. The achieved results serve to demonstrate the effectiveness and the viable application the suggested control solutions to air conditioning systems. The benchmark model represents one of the key issues of this study, which is exploited for benchmarking different model–based and data–driven advanced control methodologies through extensive simulations. Moreover, this work highlights the main features of the proposed control schemes, while providing practitioners and heating, ventilating and air conditioning engineers with tools to design robust control strategies for air conditioning systems.

Personal Information Management Systems (PIMS) are acquiring a prominent role in the data economy by promoting services that help individuals to have more control over the processing of their personal data, in line with the European data protection law. One of the highlighted solutions in this area is Solid, a new protocol that is decentralizing the storage of data, through the usage of interoperable Web standards and semantic vocabularies, to empower its users to have more control over the processing of data by agents and applications. However, to fulfill this vision and gather widespread adoption, Solid needs to be aligned with the law governing the processing of personal data in Europe, the main piece of legislation being the General Data Protection Regulation (GDPR). To assist with this process, we analyze the current efforts to introduce a policy layer in the Solid ecosystem, in particular, related to the challenge of obtaining consent for processing personal data, focusing on the GDPR. Furthermore, we investigate if, in the context of using personal data for biomedical research, consent can be expressed in advance, discuss the conditions for valid consent and how it can be obtained in this decentralized setting, namely through the matching of privacy preferences, set by the user, with requests for data and whether this can signify informed consent. Finally, we discuss the technical challenges of an implementation that caters to the previously-identified legal requirements.

We propose an approach for estimating the error in depth data provided by generic 3D sensors, which are modern devices capable of generating an image (RGB data) and a depth map (distance) or other similar 2.5D structure (e.g. stereo disparity) of the scene. Our approach starts capturing images of a checkerboard pattern devised for the method. Then proceed with the construction of a dense depth map using functions that generally comes with the device SDK (based on disparity or depth). The 2D processing of RGB data is performed next to find the checkerboard corners. Clouds of corner points are finally created (in 3D), over which an RMS error estimation is computed. We come up with a multi-platform system and its verification and evaluation has been done, using the development kit of the board nVIDIA Jetson TK1 with the MS Kinects v1/v2 and the Stereolabs ZED camera. So the main contribution is the error determination procedure that does not need any data set or benchmark, thus relying only on data acquired on-the-fly. With a simple checkerboard, our approach is able to determine the error for any device. Envisioned application is on 3D reconstruction for robotic vision, with a series of 3D vision sensors embarked in robots (UAV of type quadcopter and terrestrial robots) for high-precision map construction, which can be used for sensing and monitoring.

Smart buildings concept aims at the use of the smart technology to reduce energy consumption as well as improvement of the comfort conditions and users’ satisfaction. It is based on the use of smart sensors to follow both outdoor and indoor conditions as well as software for the control of comfort and security devices. The optimal control of the energy devices requires software for indoor temperature forecasting. This paper presents an ANN – based model for the indoor temperature forecasting. The model is developed using data recoded in an old building of the engineering school Polytech’Lille. Data covered both indoor and outdoor conditions. Analysis of the relevance of the input parameters allowed to develop a simplified forecasting model of the indoor temperature that uses only the outdoor temperature as well as the history of the façade temperature as input parameters. The paper presents successively, data collection, the ANN concept used in the temperature forecasting, and finally the ANN model developed for the façade and indoor forecasting. It shows that an ANN-based model using outdoor and façade temperature sensors provides a good forecasting of the indoor temperature. This model could be used for the optimal control of buildings energy devices.

In the era of digital advancements, the escalation of credit card fraud necessitates the development of robust and efficient fraud detection systems. This paper delves into the application of machine learning models, specifically focusing on ensemble methods, to enhance credit card fraud detection. Through an extensive review of existing literature, we identified limitations in current fraud detection technologies, including issues like data imbalance, concept drift, false positives/negatives, limited generalisability, and challenges in real-time processing. To address some of these shortcomings, we propose a novel ensemble model that integrates a Support Vector Machine (SVM), K-Nearest Neighbor (KNN), Random Forest (RF), Bagging, and Boosting classifiers. This ensemble model tackles the dataset imbalance problem associated with most credit card datasets by implementing under-sampling and the Synthetic Over-sampling Technique (SMOTE) on some machine learning algorithms. The evaluation of the model utilises a dataset comprising transaction records from European credit card holders, providing a realistic scenario for assessment. The methodology of the proposed model encompasses data pre-processing, feature engineering, model selection, and evaluation, with Google Colab computational capabilities facilitating efficient model training and testing. Comparative analysis between the proposed ensemble model, traditional machine learning methods, and individual classifiers reveals the superior performance of the ensemble in mitigating challenges associated with credit card fraud detection. Across accuracy, precision, recall, and F1-score metrics, the ensemble outperforms existing models. This paper underscores the efficacy of ensemble methods as a valuable tool in the battle against fraudulent transactions. The findings presented lay the groundwork for future advancements in the development of more resilient and adaptive fraud detection systems, crucial as credit card fraud techniques continue to evolve.

Adequate public spaces and urban green areas are key criteria for urban development and infrastructure implementation of healthy cities. Latterly, there has been an increasing number of research methods using artificial intelligence (AI) to monitor, quantify, and control the state of these spaces with an aim towards pioneering research in Urban Studies. However, in informal areas, open-data access tends to lack adequate and updated information, making it difficult to use AI methods. Hence, we propose a methodology for restricted open data collection and preparation for future use in machine learning or spatial data science models for similar areas. To that extent, we examine two peripheral and low-income neighborhoods in Quito, Ecuador, La Bota and Toctiuco, to analyze their public spaces, urban green areas, points of interest, and road networks, and how they address healthy cities criteria. We develop an original methodological approach that combines an index of proximity, accessibility, quantity, and quality of these spaces with geospatial and network analysis techniques. Results indicate that the connectivity and structure of these spaces are centralized and nodal, representing exclusion and segregation. This work provides insights on potential healthy spaces, and information to urban planners and policymakers in decision-making for healthy urban infrastructure.

In a dynamic and rapidly changing world, customers’ often conflicting demands plus fluid economic requirements, often driven by geo-politics, have continued to evolve, out-striping the capability of existing production systems. With its inherent shortcomings, the traditional factory has proven to be incapable of addressing these modern-day manufacturing challenges. Recent advancements in Industry 4.0 have catalyzed the development of new manufacturing paradigms (or smart factory visions) under different monikers (e.g., Smart factory, Intelligent factory, Digital factory, Cloud-based factory etc.) would help fix these challenges. Due to a lack of consensus on a general nomenclature for these manufacturing paradigms, the term Future Factory (or Factory of the Future) is here used as a collective euphemism, without prejudice. The Future Factory constitutes a creative convergence of multiple technologies, techniques and capabilities that represent a significant change in current production capabilities, models, and practices. It is a data-driven manufacturing approach and system that harnesses intelligence from multiple information streams i.e., assets (including people), processes, and subsystems to help create new forms of production efficiency and flexibility. Serving both as a review monograph and reference companion, this paper details the meanings, characteristics, and technological underpinnings of the Future Factory. It also elucidates on the architectural models that guide the structured deployment of these modern factories with particular emphasis on three advanced communication technologies capable of speeding up advancements in the field. It not only highlights the relevance of communication between assets but also lays out mechanisms to achieve these interactions using the Administration shell. Finally, the paper also discusses the key enabling technologies that are typically embedded into bare bone factories to help improve their visibility, resilience, intelligence, and capacity, in addition to how these technologies are being deployed and to what effect. At the onset of the study, we were interested in developing a monograph which would serve as a comprehensive but concise review of general principles, fundamental concepts, major characteristics, key building blocks and implementation guidelines for the Future Factory within the overall context of the manufacturing ecosystem, in the age of Industry 4.0. Our hope is that this paper would enrich the extant literature on advanced manufacturing, help shape policy and research, and provide insights on how some of the identified pathways can be diffused into industry.

In the extensive monitoring of maritime traffic, maritime management frequently encounters incomplete automatic identification system (AIS) data, particularly in critical static fields like vessel types. This shortfall presents substantial challenges in safety management, necessitating robust methods for data completion. Distinct from road traffic, where road width imposes constraints, maritime vessels of identical classifications often choose significantly divergent routes, deviating by several nautical miles. Sole dependence on trajectory clustering is insufficient. Addressing this issue, we segments the maritime area into spatiotemporal grids, transforming vessel paths into sequences of grid encodings. Utilizing natural language processing techniques, we integrate the Word2vec word embedding approach with our novel biLSTM self-attention chunk-max pooling net (biSAMNet) model, enhancing the classification of vessel trajectories. This method is crucial for determining static details like vessel types. Employing the Taiwan Strait as a case study and benchmarking against CNN, RNN, and methods based on the attention mechanism, our findings underscore our model’s superiority. The biSAMNet achieves an impressive vessel classification F1 score of 0.94, using only 5-dimensional word embeddings, highlighting the effectiveness of Word2vec pre-trained embedding layers. This research introduces a novel paradigm for processing vessel trajectory data, greatly enhancing the accuracy of filling in incomplete vessel type details.

In this paper after introducing a model of binary data matrix (BDM) for physical parameters of an evolving system (of particles), we develop a Hilbert space as an ambient space to derive induced metric tensor on embedded parametric manifold identified by associated joint probabilities of particles observables (parameters). Parameter manifold assumed as space-like hypersurface evolving along time axis, an approach that resembles 3+1 formalism of ADM and numerical relativity. We show the relation of endowed metric with related density matrix. Identification of system density matrix by this metric tensor, leads to the equivalence of quantum Liouville equation and metric compatibility condition while covariant derivative of metric tensor has been calculated respect to Wick rotated time or spatial coordinates. After deriving a formula for expected energy per particles, we prove the equality of this expected energy with local scalar curvature of related manifold. We show the compatibility of BDM model with Hamilton-Jacobi formalism and canonical forms. On the basis of the model, I derive the Ricci flow like dynamics as the governing dynamics and subsequently derive the action of BDM model and Einstein field equations. Given examples clarify the compatibility of the results with well-known principles such as equipartition energy principle and Landauer’s principle. This model provides a background for geometrization of quantum mechanics compatible with curved manifolds and information geometry. Finally, we conclude a “bit density principle” which predicts the Planck equation, De Broglie wave particle relation, , Beckenstein bound and Bremermann limit.

Prostate cancer (PCa) is characterised by androgen-dependency. Unfortunately, under anti-androgen treatment pressure, castration-resistant prostate cancer (CRPC) emerges, characterised by heterogeneous cell populations that, over time, lead to the development of different androgen-dependent or -independent phenotypes. Despite important advances in therapeutic strategies, CRPC remains incurable. Context-specific essential genes represent valuable candidates for targeted anti-cancer therapies. Through the investigation of gene and protein annotations and the integration of several published transcriptomic data, we identified two consensus lists to stratify PCa patients' risk and discriminate CRPC phenotypes based on androgen receptor activity. ROC and Kaplan-Meier survival analyses were used for gene set validation in independent datasets. We further evaluated these genes for their association with cancer dependency. The deregulated expression of the PCa-related genes was associated with overall and disease-specific survival, metastasis and/or high recurrence risk, while the CRPC-related genes clearly discriminated between adeno and neuroendocrine phenotypes. Some of the genes showed context-specific essentiality. We further identified candidate drugs through a computational repositioning approach for targeting these genes and treating lethal variants of PCa. This work provides a proof-of-concept for the use of an integrative approach to identify candidate biomarkers involved in PCa progression and CRPC pathogenesis within the goal of precision medicine.

Cable-Driven Parallel Robots (CDPRs) are a special kind of parallel manipulator which use cables to control the position and orientation of the mobile platform or end-effector. The usage of cables instead of rigid links offer some advantages over their conventional rigid counterparts. As cables can only pull, but not push, the number of cables (n) required to command the end-effector is always n+1. This configuration is known as fully-constrained and it is the most extended configuration for CDPRs. Although CDPRs have many advantages, such as their ability to cover large working areas, one of their main problems is that their working area (workspace) is limited in comparison to its frame area (planar case), or frame volume (spatial case), due to the minimum and maximum allowed tensions. Depending of these tensions values the workspace can be notoriously decreased. In order to tackle this problem, lots of works focus on solving kinematics or dynamics problems for cable sagging, i.e., they take into account sagging when modelling the robot kinematic and include these poses inside the usable robot workspace. Taking into account phenomenons like this increases the mathematical complexity of the problem, and much more complex techniques are required. On the other hand, the lack of workspace problem can be tackled by adding active or passive elements to the robot design. In this sense, this paper proposes two mechanical modifications: to add passive carriages to the robot frame and to use a single cable loop to command the end-effector position and orientation. This work presents the kinematic, static and dynamic models of the novel design and shows the gain of workspace for a planar case while taking into account different parameters of the robot.

This paper uses the spatial analysis software GeoDa as a tool, takes GRP (Gross regional product) of Sichuan Province in 2012 and 2018 as the dependent variable, and takes the city (autonomous prefecture) factor-driven, investment-driven and innovation-driven indicators as the dependent variable to explore the impact of innovation activities on regional economic development and the spatial distribution characteristics of regional economy. Through the comparison of the global correlation and local correlation, this paper explores the crux of the regional economic polarization and unbalanced development, and puts forward some measures to solve the existing economic development problems, such as cultivating and improving the regional industrial dependence, accelerating the regional transportation accessibility and convenience, and constructing the regional collaborative innovation system, So as to achieve the strategic goal of the construction of innovative Province in Sichuan Province.

Finding anomalies in the real-time system is recognized as one of most challenging study in information security. It has so many applications like IoT, and Stock-Market. In any IoT system the data generated are real-time, and temporal in nature. Since due to the extreme exposure to Internet and interconnectivity of devices, the IoT systems often face issues like fraud, anomalies, intrusions etc. Discovering anomaly in such domain can be interesting. Clustering and rough set theory have been tried in many cases. Considering the time-stamp associated with IoT data, time-dependent patterns like periodic clusters can be generated which could be helpful for the efficient detection of anomalies by providing more in-depth analysis of the system. In this paper, a mixed method comprising of nano topology, a modified k-means clustering and an interval superimposition technique is used for finding fuzzy periodic clusters in the subspace generated by the nano topology. For every clusters there will be an associated sequence of time-intervals where it exists. The sequence time-intervals accompanying with each clusters may exhibit some remarkable patterns. For example, there may exist different types of periodicity namely yearly, monthly, daily, and hourly etc. For finding such fuzzy periodicity, an operation called interval-superimposition has been used. The time-intervals associated with each cluster are superimposed if they have reasonable overlapping. Each superimposed time-interval generates a fuzzy time-interval. The data instances are thought to be anomalous if they either belong to sparse clusters or don't belong to any clusters. The efficacy of the method can be assessed by means of both time-complexity analysis and comparative studies with existing clustering-based anomaly detection algorithms with a real-life and a synthetic dataset. It can been found experimentally that our method can extract anomaly with 98% of accuracy and it runs cubic time approximately.

Recent advances in mathematical modelling and artificial intelligence have challenged the use of traditional regression analysis in biomedical research. This study examined artificial and cancer research data using binomial and multinomial logistic regression and compared its performance with other machine learning models such as random forests, support vector machines, Bayesian classifiers, k-nearest neighbours and repeated incremental clipping (RIPPER). The alternative models often outperformed regression in accurately classifying new cases. Logistic regression had a structural problem similar to early single-layer neural networks, which limited its ability to identify variables with high statistical significance for reliable class assignment. Therefore, regression is not always the best model for class prediction in biomedical datasets. The study emphasises the importance of validating selected models and suggests that a mixture of experts approach may be a more advanced and effective strategy for analysing biomedical datasets.

Electricity demand forecasting plays a significant role in energy markets. Accurate prediction of electricity demand is the key factor to optimize power generation, consumption, saving energy resources, and determining the energy prices. However, integrating energy mix scenarios, including solar and wind power which are highly non-linear and seasonal, into an existing grid increases uncertainty in generation, adds the challenges for precise forecast. To tackle these challenges, state-of-the-art methods and algorithms have been implemented in literature. We have developed Artificial Intelligence (AI) based deep learning models that can effectively handle the information of long time-series data. Based on the pattern of dataset, four different scenarios were developed and two best scenarios were selected for prediction. Dozens of models were developed and tested in deep AI networks. In the first scenario (Scenario1), data for weekdays excluding holidays was taken and in the second scenario (Scenario2) all the data in the basket was taken. Remaining two scenarios, weekends and holidays were tested and neglected because of their high prediction error. To find the optimal configuration, models were trained and tested within a large space of alternatives called hyper-parameters. In this study, an Aritificial Neural Network (ANN) based Feed-forward Neural Network (FNN) showed the minimum prediction error for Scenario1 while a Recurrent Neural Network (RNN) based Gated Recurrent Network (GRU) showed the minimum prediction error for Scenario2. While comparing the accuracy, the lowest MAPE of 2.47% was obtained from FNN for Scenario1. When evaluating the same testing dataset (non-holidays) of Scenario2, the RNN-GRU model achieved the lowest MAPE of 2.71%. Therefore, we can conclude that grouping of weekdays as Senario1 prepared by excluding the holidays provides better forecasting accuracy compared to the single group approach used in Scenario2, where all the dataset is considered together. However, Scenario2 is equally important to predict the demand for weekends and holidays.

This study introduces the Dynamic Feedback-Driven Learning Optimization Framework (DFDLOF), an innovative machine learning-based approach to personalize educational pathways. DFDLOF leverages advanced algorithms for in-depth analysis of learner data, enabling the dynamic customization of educational content and methodologies. Its application in diverse online platforms, including Khan Academy and Coursera, underscores its adaptability and scalability. DFDLOF enhances learner engagement and outcomes by providing tailored learning experiences and real-time feedback. Key insights reveal its strengths in personalized education, particularly in dynamically adapting learning paths and the importance of real-time feedback. Challenges identified include integration complexities and data privacy concerns. Future research directions emphasize the need for longitudinal impact studies and broader demographic applications. This study contributes significantly to the evolving domain of adaptive learning technologies, demonstrating the transformative potential of machine learning in personalizing education.

In the realm of mathematics education, self-explanation stands as a crucial learning mechanism, allowing learners to articulate their comprehension of intricate mathematical concepts and strategies. As digital learning platforms grow in prominence, there are mounting opportunities to collect and utilize mathematical self-explanations. However, these opportunities are met with challenges in automated evaluation. Automatic scoring of mathematical self-explanations is crucial for preprocessing tasks, including the categorization of learner responses, identification of common misconceptions, and the creation of tailored feedback and model solutions. Nevertheless, this task is hindered by the dearth of ample sample sets. Our research introduces a semi-supervised technique using the Language Learning Model (LLM), specifically its Japanese variant, to enrich datasets for the automated scoring of mathematical self-explanations. We rigorously evaluated the quality of self-explanations across five datasets, ranging from human-evaluated originals to ones devoid of original content. Our results show that combining LLM-based explanations with mathematical material significantly improves the model's accuracy. Interestingly, there's an optimal limit to how much synthetic self-explanation data can bene-fit the system. Exceeding this limit doesn't further improve outcomes. This study thus highlights the need for careful consideration when integrating synthetic data into solutions, especially within the mathematics discipline.

Buyer practices have changed as individuals are figuring out how to live with the new truth of COVID-19. Take-out and conveyance orders have expanded, and our customer has added new items to their menu because of new client inclinations. With every one of the continuous changes, the customer had numerous unanswered inquiries, for example, Smartbridge has broad involvement with café innovation development Café TECHNOLOGY CAPABILITIES :Are the most famous items as yet unchanged after COVID? :Which are the most sold item blends now? :What is the acknowledgment of new things? :What are clients purchasing alongside new things? :How have liquor deals changed? The customer previously had reports that followed item deals and operational measurements, notwithstanding, there was a need to get a more profound knowledge into item examination. The customer expected to recognize what items and introductions were being sold all the more frequently, measure the acknowledgment of new items, and figure out what items clients buy together to improve advertising efforts, advancements, and deals. he E-business industry is filling immensely in the Indian market. The modest 4G web bundles in India clearly gives a push to these ventures. Thus, as Covid19 first hit in Quite a while, individuals got terrified to go out from their homes in light of the fact that, in their mind, it's a dread of Covid. They even wonder whether or not to go out to purchase fundamental (FMCG) products. Frenzy purchasing additionally has seen and to stay away from this dread of COVID-19, individuals are offering inclinations to the E-Commerce destinations to purchase fundamental products and a few clients are new which joined to purchase fundamental merchandise during this Pandemic Lockdown period. Numerous clients are moving their purchasing conduct from disconnected retail locations to online stores. This paper examines the customer buying pattern during lockdown.

Balancing the efficiency and robustness of food systems is a well-known trade-off process. Over-optimization of efficiency may lead to excessive use of resources. On the other hand, under-optimization of efficiency may lead to excessive waste of resources. Using non-parametric methods can help in developing actionable frameworks through which decision-makers and stakeholders can effectively balance and improve food systems' efficiency and robustness. Under this context, this paper presents a new structured approach integrating two well-suited non-parametric methods for analyzing and balancing the interconnection between the efficiency and robustness of food systems. This approach consists of three main steps. First, the slacks-based data envelopment analysis (SBM-DEA) is utilized to analyze the efficiency of five food robustness dimensions. Second, the weighted efficiency of these dimensions is computed and analyzed to provide an insight into their influence on the food system efficiency. Finally, two search methods were developed to identify opportunities for improving efficiency and robustness. The outcomes of these methods have been analyzed and validated to ensure their effectiveness and viability. The operational and mathematical properties of the proposed approach were evaluated using data from thirty-seven food-producing countries. The weights of the robustness dimensions in this study were determined using the analytic hierarchy process (AHP) method. The input matrix of the AHP was constructed using expert judgment and consultations with stakeholders. The results of this study have shown an appropriate level of applicability and effectiveness of the proposed approach. While the first search method provided valuable insights, the second method proved to be more effective in identifying the sources of inefficacy of robustness dimensions. Several conclusions have been drawn and reported with some recommendations for future research works.

The separation of Li+ and [Bmim]+(1-Butyl-3-methylimidazolium) by electrically driven membrane technology was studied. The effects of the types and modification processes of cation exchange membranes, current density, total cation concentration, temperature, and anion types on separation efficiency were investigated. The results indicated that it is feasible to achieve efficient separation of Li+ and [Bmim]+ using the selectivity of cation exchange membranes under electric field. Membrane CMX and the modified membrane A and B which obtained from the CMX showed obvious selective of Li+ from [Bmim]+. When the current density is 5 mA/cm2 and the feed concentrations of Li+ and [Bmim]+ are 0.3 mol/L and 0.2 mol/L, the selective transport coefficient of the modified membrane B can reach 6.2 in the first 120 minutes of the process. Reducing current density and increasing total cation concentration can improve separation efficiency. Lowering the temperature can improve the separation effect, but improvement is not obviously. Changing the anion of the feed from chloride ion to acetate has no effect on the separation.

Digital filtering is a fundamental technique in digital signal processing, which operates on a digital sequence without any information on how the sequence was generated. This paper proposes a methodology for designing the equivalent of digital filtering for neuromorphic samples, which are a low power alternative to conventional digital samples. In the literature, filtering using neuromorphic samples is done by filtering the reconstructed analog signal, which is required to belong to a predefined input space. We show that this requirement is not necessary, and introduce a new method for computing the neuromorphic samples of the filter output directly from the input samples, backed by theoretical guarantees. We show numerically we can achieve a similar accuracy compared to the conventional method. However, given that we bypass the analog signal reconstruction step, our results show significantly reduced computation time for the proposed method and good performance even when signal recovery is not possible.

Cable interference in cable-driven mechanisms (CDM) is a major challenge in their applications. The wrench closure workspace (WCW) in a fully constrained mechanism may not be realized unless cable interference is considered. This paper classifies all possible types of cable interferences for planar cable-driven mechanisms and presents an analytical solution to find the boundaries of the constant-orientation interference region. It is shown that interference between cables starts and ends when one end of a cable coincides with another cable which can be thought as lying a point on a line segment. This geometrical view is developed and applied to provide a framework for the analysis of cable interference. By subtracting the interference space form WCW, the interference-free workspace is obtained in which the robot is able to operate.

Despite a rapid rise in NBS development in recent years, the methods for evaluating NBS still have certain gaps. We propose an approach based on a combination of remote sensing data and meteorological variables to reconstruct the spatio-temporal variation of net ecosystem exchange from eddy-covariance stations. Lagrangian particle dispersion model was used for upscaling of satellite images and flux towers. We trained data-driven models based on kernel methods separately for each selected land cover class. The results suggest that the proposed approach to quantifying carbon exchange on a medium-to-large scale by blending eddy covariance flux data with moderate resolution satellite and weather data provides a set of key advantages over previously deployed methods: (1) scalability, achieved via the validation design based on a separate set of eddy covariance stations; (2) high spatial and temporal resolution due to use of the Landsat imagery; (3) robust and accurate predictions due to improved data quality control, advanced machine learning techniques, and rigorous validation. The machine learning models yielded high cross-validation results. Overall we present here globally scaled technology for the land sector based on high resolution remote sensing imagery, meteorological variables, and direct carbon flux measurements of eddy covariance flux stations.

A significant attention has been made to the accurate detection of diabetes which is a big challenge for the research community to develop a diagnosis system to detect diabetes in a successful way in the IoT e-healthcare environment. Internet of Things (IOT) has emerging role in healthcare services which delivers a system to analyze the medical data for diagnosis of diseases applied data mining methods. The existing diagnosis systems have some drawbacks, such as high computation time, and low prediction accuracy. To handle these issues, we have proposed a IOT based diagnosis system using machine learning methods, such as preprocessing of data, feature selection, and classification for the detection of diabetes disease in e- healthcare environment. Model validation and performance evaluation metrics have been used to check the validity of the proposed system. We have proposed a filter method based on the Decision Tree (Iterative Dichotomiser 3) algorithm for highly important feature selection. Two ensemble learning Decision Tree algorithms, such as Ada Boost and Random Forest are also used for feature selection and compared the classifier performance with wrapper based feature selection algorithms also. Machine learning classifier Decision Tree has been used for the classification of healthy and diabetic subjects. The experimental results show that the Decision Tree algorithm based on selected features improves the classification performance of the predictive model and achieved optimal accuracy. Additionally, the proposed system performance is high as compared to the previous state-of-the-art methods. High performance of the proposed method is due to the different combinations of selected features set and GL, DPF, and BMI are more significantly important features in the dataset for prediction of diabetes disease. Furthermore, the experimental results statistical analysis demonstrated that the proposed method would be effectively detected diabetes disease and can easily be deployed in IOT wireless sensor technologies based e-healthcare environment.

Historically, the lack of comprehensive and real-time data is the main challenge in city sustainability assessments. However, with the increase in the availability of crowdsourced data over the last decade, a rich and real-time data source provides detailed images of urban systems. This has opened up new opportunities for practitioners, including geographers, social researchers, and data scientists, to gather and utilize social media data as a core source for studying cities and assessing their sustainability. This paper proposes an assessment model for the sustainability of cities based on crowdsourced data and the principles of General System Theory. The model aims to utilize crowdsourced data for the analysis and decision-making processes to enhance the sustainability and resilience of smart future cities.

Addressing the urgent sustainability challenges in the wine industry, this study explores the efficacy of sustainability-oriented innovations (SOIs) and smart farming technologies (SFTs) across wine value chains in Cyprus and Italy. Employing KPIs for a rigorous assessment, the research delves into the environmental, economic, and social impacts of these technologies. In Cyprus (SIP7), the integration of digital labelling and smart farming solutions led to a substantial reduction in pesticide usage by up to 75% and enhanced the perceived quality of wine by an average of 8%. Italy's SIP10 witnessed a 33.4% decrease in greenhouse gas emissions, with an additional benefit of a 5.3% improvement in intrinsic product quality. Notably, SIP10 also introduced a carbon credit system, potentially generating an average annual revenue of €4,140 per farm. These findings highlight the transformative potential of SOIs and SFTs in promoting sustainable practices within the wine industry, demonstrating significant advancements in reducing environmental impact, improving product quality, and enhancing economic viability. The study underscores the critical role of innovative technologies in achieving sustainability goals and provides a compelling case for wider adoption within the agricultural sector.

Machine Learning (ML) was used to assess and predict urban air temperature (Tair) considering the complexity of the terrain features in Yerevan (Armenia). The estimation was performed based on the PLSR model with a high number (30) of input variables. The relevant parameters include a newly purposed modification of spectral index IBI-SAVI, which turned out to be strongly impacting on Tair prediction together with land surface temperature (LST). Cross-validation analysis on temperature predictions across a station-centered 1000m circular area revealed quite a high correlation (R2Val = 0.77, RMSEVal = 1.58) between predicted and measured Tair from the test set. It was concluded the remote sensing is an effective tool to estimate Tair distribution where a dense network of weather stations is not available. However, further developments will include incorporation of additional weather parameters from the weather stations such as precipitation and wind speed, and the use of non-parametric ML techniques.

The benefits of event-driven architecture (EDA) derive from how systems and components are loosely coupled, which can facilitate independent development and deployment of systems, improved scaling and fault tolerance, and integration with external systems, especially in comparison to monolithic architectures. With the advent of new technologies such as containers, and microservices, a new generation of distributed event streaming platforms are commonly used in event-driven architecture for efficient event-driven communication. However, the asynchronous and distributed nature of EDA poses several problems that include handling failures, the dependence of an end-to-end transaction on individual component stability, etc. In this paper, we describe a new approach to designing self-regulating distributed applications with autopoietic and cognitive workflow management. This approach is based on the new science of information processing structures derived from the General Theory of Information. Just as a genome enables self-organizing and self-regulating biological structures, a digital genome enables a specific software application with several components, the ability to use distributed resources and self-regulate the evolution of the system based on functional and non-functional requirements, and best-practice policies that maintain the stability, safety, and survival under non-deterministic fluctuations in the demand for resources. In addition, cognitive workflow management assures end-to-end transaction delivery.

Background: MOST-plus is a multicenter, randomized, open-label, adaptive Phase II trial evaluating the clinical benefit of targeted treatments matched to molecular alteration in advanced/metastatic solid tumors. Sorafenib was tested on patients with tumors harboring sorafenib-targeted genes Methods: The MOST-plus trial used a randomized discontinuation design. After 12 weeks of sorafenib (400 mg, po BID), patients with progressive disease dis-continued study, patients with objective response were proposed to continue sorafenib, whereas patients with stable disease (SD) were randomly assigned (1:1) to maintenance or interruption of treatment. Primary endpoint was RE-CIST version 1.1 progression-free rate at 16 weeks after randomization (PFR-16w). Secondary endpoints included progression-free survival (PFS), overall survival (OS), and toxicity. Statistical analyses used a sequential Bayes-ian approach with interim efficacy analyses. The enrolment could be stopped in the case of a 95% probability for the estimated PFR-16w to be higher in the maintenance than in the interruption arm (NCT02029001). Results: 151 patients were included, of whom 35 had SD at 12 weeks of Soraf-enib. For the 35 patients with SD on sorafenib, the PFR-16w was 65% [95% credibility interval 43.4–83.7] in the continuation arm and 25% [7.8–48.1] in the interruption arm. Median PFS and OS were improved in maintenance versus interruption arm (mPFS: 5.6 [95%CI 1.97–6.77] months versus 2.0 [95%CI 1.61–3.91] months (p =0.0231) and mOS : 14.3 [95%CI 8.9–23.8] versus 8.0 months [95%CI 3.5–15.2] (p =0.0857)). Conclusion: Sorafenib showed activity in progressive patients with solid tu-mors harboring somatic genomic alterations in sorafenib-targeted genes. Con-tinuing sorafenib when SD is achieved improves PFR compared to interruption

The aim of this study is to model hydrodynamic processes of the Istanbul Strait with its stratified flow characteristic and calibrate the most important parameters using local and global search algorithms. For that two open boundary conditions are defined, which are in the North and South part of the Strait. Observed bathymetric, hydrographic, meteorological and water level data are used to set up the Delft3D-FLOW model. First, the sensitivities of model parameters on the numerical model outputs are assessed using PEST toolbox. Then, the model is calibrated based on the objective functions focusing on the flowrates of upper and lower layers. The salinity and temperature profiles of the Strait are only used for model validation. The results show that the calibrated model outputs of Istanbul Strait are reliable and consistent with the in-situ measurements. The sensitivity analysis reveals that the Spatial Low-Pass Filter Coefficient, Horizontal Eddy Viscosity, Prandtl-Schmidt Number, Slope in log-log Spectrum and Manning Roughness Coefficient are most sensitive parameters affecting flowrate performance of the model. The agreement between observed salinity profiles and simulated model outputs is promising whereas the match between observed and simulated temperature profiles is weak showing that the model can be improved particularly for simulating the mixing layer.

The aim of this paper is to develop an intelligent event-driven Electrocardiogram (ECG) processing module in order to achieve an efficient solution for diagnosis of the cardiac diseases. The suggested method acquires the signal with an event-driven A/D converter (EDADC). The output of EDADC is passed through the activity selection and interpolation blocks. It allows focusing only on the important signal parts and resampling it uniformly. Later on, the signal is de-noised. The autoregressive (AR) method is used to extract the classifiable features of the de-noised signal. Afterwards, the output is classified by employing different robust classification techniques such as support vector machines (SVMs), K- Nearest Neighbor (KNN) and Artificial Neural Network (ANN). The event-driven feature enables to adapt the system processing load according to the signal temporal variations. This interesting feature of the devised system aptitudes a drastic reduction in its processing activity and therefore in the power consumption as compared to the traditional ones. A comparison of the performance of different classifiers is also made in terms of accuracy. Results show that the proposed system is a potential candidate for an automatic diagnosis of the cardiac diseases.

Manufacturing organizations shall recognize sustainability as a business occasion to capitalize on, rather than an undesirable pressing situation. Still, empirical evidence shows that this opportunity is hard to capture and communicate in global strategic decisions, through planning by tactical management, to daily operational activities. This paper systematically reviews the modeling challenges at the crossroad of value and sustainability decisions making, spotlighting methods and tools proposed in literature to link sustainability to customer value creation at strategic, tactical and operational level. While statistical results show that the topic of sustainability and value modeling is trending in literature, findings from content analysis reveal that recent attempts to promote a value-based view in the sustainability discussion remain at a strategic level, with most of the proposed indicators being suited for managerial decision-making. The lack of support at operational level points to the opportunity of cross-pollinating sustainability research with value-centered methodologies originating from the aerospace sector. The Value Driven Design framework is proposed as main hub from which to derive models supporting engineers and technology developers in the identification of win-win-win situations, where sustainable improvements are aligned with business advantages.

In scenarios such as natural disasters and military strike, it is common for unmanned aerial vehicles (UAVs) to form groups to execute reconnaissance and surveillance. To ensure the effectiveness of UAV communications, repeated resource acquisition issues and transmission mechanism design need to be addressed urgently. In this paper, we build an information interaction scenario in a Flying Ad-hoc network (FANET). The data transmission problem with the goal of throughput maximization is modeled as a coalition game framework. Then, a novel mechanism of coalition selection and data transmission based on group-buying is investigated. Since large-scale UAVs will generate high transmission overhead due to the overlapping resource requirements, we propose a resource allocation optimization method based on distributed data content. Comparing existing works, a data transmission and coalition formation mechanism is designed. Then the system model is classified into graph game and coalition formation game. Through the design of the utility function, we prove that both games have stable solutions. We also prove the convergence of the proposed approach with coalition order and Pareto order. Binary log-linear learning based coalition selection algorithm (BLL-CSA) is proposed to explore the stable coalition partition of system model. Simulation results show that the proposed data transmission and coalition formation mechanism can achieve higher data throughput than the other contrast algorithms.

Alzheimer’s Disease (AD) affects the quality of life of millions of people worldwide and represents one of the biggest challenges for the whole society. The SH-SY5Y neuroblastoma cell line is often used as an in vitro model of neuronal function and is widely applied to study the molecular events leading to AD. In the last few years, basic research on SH-SY5Y cells has provided interesting insights for the discovery of new drugs and biomarkers for improved AD treatment and diagnosis. At the same time, untargeted NMR metabolomics is widely applied on biological fluids for (i) metabolic profile analysis, (ii) screening for differential metabolites, (iii) analysis of metabolic pathways, and (iv) the discovery of new biomarkers. Principal Component Analysis (PCA) and Linear Discriminant Analysis (LDA) have proved to be powerful methods for processing NMR data, being useful in signal quantization, even if more sophisticated --- typically non--linear --- techniques are needed to obtain compact yet information--rich embeddings for complex spectra. In this paper, a compression technique based on convolutional autoencoders is proposed, which can perform a high dimensionality reduction of the spectral signal (up to more than 300 times), maintaining informative features (guaranteed by a reconstruction error always smaller than 5%). Moreover, before compression, an ad hoc preprocessing method was devised to remedy the scarcity of available data. The compressed spectral data were then used to train some SVM classifiers to distinguish diseased from healthy cells, achieving an accuracy close to 78%, a significantly better performance with respect to using PCA--compressed data.

An advanced driver-assistance system (ADAS) is critical to driver-vehicle-interaction systems. Driving behaviour modelling and control significantly improves the global performance of ADAS. A haptic assistive system assists the driver by providing a specific torque on the steering wheel according to the driving-vehicle-road profile to improve the steering control. However, the main problem is designing a compensator dealing with the high-level uncertainties in different driving scenarios with haptic driver assistance, where different personalities and diverse perceptions of drivers are considered. If not properly accounted for, these differences can lead to poor driving performance. This paper focuses on designing a data-driven model-free compensator considering various driving behaviours with a haptic feedback system. A back propagation neural network (BPNN) models driving behaviour based on real driving data (speed, acceleration, vehicle orientation, and current steering angle). Then using the genetic algorithm (GA) and the integral time absolute error (ITEA) criterion to optimize multiple PID compensation parameters for various driving behaviour (such as speeding/braking, lane-keeping and turning), which are then be combined by the fuzzy logic to provide different driving commands. An experiment was conducted with 5 participants in a driving simulator. During the second experiment, seven participants drove in the simulator to evaluate the robustness of the proposed combined GA-PID offline and the Fuzzy-PID controller applied online. The experiment results evaluated the ITAE of lateral displacement and yaw angle, during various driving behaviour. The results validated the proposed method by significantly enhancing the driving performance.

In recent years, more and more health data are being generated. These data come not only from professional health systems, but also from wearable devices. All these data combined form ‘big data’ that can be utilized to optimize treatments for each unique patient (‘precision medicine’). To achieve this precision medicine, it is necessary that hospitals, academia and industry work together to bridge the ‘valley of death’ of translational medicine. However, hospitals and academia often have problems with sharing their data, even though the patient is actually the owner of his/her own health data, and the sharing of data is associated with increased citation rate. Academic hospitals usually invest a lot of time in setting up clinical trials and collecting data, and want to be the first ones to publish papers on this data. The idea that society benefits the most if the patient’s data are shared as soon as possible so that other researchers can work with it, has not taken root yet. There are some publicly available datasets, but these are usually only shared after studies are finished and/or publications have been written based on the data, which means a severe delay of months or even years before others can use the data for analysis. One solution is to incentivize the hospitals to share their data with (other) academic institutes and the industry. Here we discuss several aspects of data sharing in the medical domain: publisher requirements, data ownership, support for data sharing, data sharing initiatives and how the use of federated data might be a solution. We also discuss some potential future developments around data sharing.

Nowadays, one of the greatest challenges in Data Meshes revolves around detecting and creating Data Domains and Data Products for providing the ability to adapt easily and quickly to changing business needs. This requires a disciplined approach to identify, differentiate and prioritize distinct data sources according to their content and diversity. The current paper tackles this highly com-plicated issue and suggests a standardized approach that integrates the concept of Data Blueprints with Data Meshes. In essence, a novel standardization framework is proposed that creates Data Products using a metadata semantic enrichment mechanism, the latter also offering Data Domain readiness and alignment. The approach is demonstrated using real-world data produced by mul-tiple sources in a poultry meat production factory. A set of functional attributes is used to compare qualitatively the proposed approach against existing data structures utilized in storage architectures with quite promising results. Finally, experimentation with different scenarios varying in data product complexity and granularity suggests successful performance.

With an increasing amount of biological data available publicly, there is a need for a guide on how to successfully download and use this data. The Ten simple rules for using public biological data are: 1) use public data purposefully in your research, 2) evaluate data for your use case, 3) check data reuse requirements and embargoes, 4) be aware of ethics for data reuse, 5) plan for data storage and compute requirements, 6) know what you are downloading, 7) download programmatically and verify integrity, 8) properly cite data, 9) make reprocessed data and models Findable, Accessible, Interoperable, and Reusable (FAIR) and share, and 10) make pipelines and code FAIR and share. These rules are intended as a guide for researchers wanting to make use of available data and to increase data reuse and reproducibility.

Improvements in web platforms for data exchange and trading are creating more opportunities for users to obtain data from data providers of different domains. However, the current data exchange platforms are limited to unilateral information provision from data providers to users. In contrast, there are insufficient means for data providers to learn what kinds of data users desire and for what purposes. In this paper, we propose and discuss the description items for sharing users’ call for data as data requests in the data marketplace. We also discuss structural differences in data requests and providable data using variables, as well as possibilities of data matching. In the study, we developed an interactive platform, treasuring every encounter of data affairs (TEEDA), to facilitate matching and interactions between data providers and users. The basic features of TEEDA are described in this paper. From experiments, we found the same distributions of the frequency of variables but different distributions of the number of variables in each piece of data, which are important factors to consider in the discussion of data matching in the data marketplace.

Borderline Personality Disorder (BPD) is a severe personality disorder whose neural bases are still unclear. Indeed, previous studies reported inconsistent findings concerning alterations in cortical and subcortical areas. In the present study we applied for the first time an unsupervised machine learning approach known as mCCA+jICA, in combination with a supervised machine learning approach known as Random Forest, to possibly find covarying GM-WM circuits that separate BPD from controls and that are also predictive of this diagnosis. To this aim, we analyzed the structural images of patients with BPD and matched HCs. Results showed that two GM-WM covarying circuits, including basal ganglia, amygdala, and portions of the temporal lobes and of the orbitofrontal cortex, correctly classified BPD against HC. Notably, these circuits are affected by specific child traumatic experiences (emotional and physical neglect, and physical abuse) and predict symptoms severity in the interpersonal and impulsivity domains. These results support that BPD is characterized by anomalies in GM and WM circuits related to early traumatic experiences and specific symptoms.

This paper studied the natural convection heat transfer from two equal-sized cylinders of triangular cross-section confined in triangular enclosure. The inner cylinders have hot surfaces and the outer enclosure has a cold surfaces. The annular space between inner cylinders and the outer one was filled with incompressible Newtonian fluid. The work examined the behavior of fluid flow in the process of transferring heat energy. The work was achieved numerically using the commercial code ANSYS-CFX. The adopted initial conditions were selected for these ranges: Prantl number (Pr = 1 to 10³), Rayleigh number (Ra = 10³ to 10⁵). It was found that the increment of Ra number increases the rate of heat transfer. However, the effect of Pr number on heat transfer is almost negligible.

In the rapidly evolving field of data management, numerous terminologies, such as data warehouse, data lake, data lakehouse, and data mesh , have emerged, each representing a unique analytical data architecture. However, the distinctions and similarities among these paradigms often remain unclear. The present paper aimed to navigate the data architecture landscape by conducting a comparative analysis of these paradigms. The analysis a identified and elucidated the differences and similari- ties in features, capabilities, and limitations of these architectural constructs. The study outcome serves as a comprehensive guide, assisting practitioners in selecting the most suitable analytical data architecture for their specific applications.

Data Meshes is an approach to data architecture and organization that treats data as a product and focuses on decentralizing data ownership and access. It has recently emerged as a field that presents quite a few challenges related to data ownership, governance, security, monitoring, and observability. To address these challenges, this paper introduces an innovative algorithmic framework leveraging data blueprints to enable the dynamic creation of Data Meshes and Data Products in response to user requests, ensuring that stakeholders will have access to specific portions of the Data Mesh as needed. Ownership and governance concerns are addressed through a unique mechanism involving Blockchain and Non-Fungible Tokens (NFTs). This facilitates secure and transparent transfer of data ownership, with the ability to mint time-based NFTs. By combining these advancements with the fundamental tenets of Data Meshes, this research offers a comprehensive solution to the challenges surrounding data ownership and governance. It empowers stakeholders to navigate the complexities of data management within a decentralized architecture, ensuring a secure, efficient, and user-centric approach to data utilization. The proposed framework is demonstrated using real-world data from a poultry meat production factory.

Gender recognition is trivial for physiotherapist, but it is considered a challenge for computers. The electromyography (EMG) and heart rate variability (HRV) were utilized in this work for gender recognition during the stepping exercise using a stepper. The relevant features were extracted and selected. The selected features were then fused to automatically predict gender recognition. However, the feature selection for gender classification became a challenge to ensure better accuracy. Thus, in this paper, a feature selection approach based on both the performance and the diversity between the two features from the rank-score characteristic (RSC) function in a combinatorial fusion approach (CFA) was employed. Then, the features from the selected feature sets were fused using a CFA. The results were then compared with other fusion techniques such as naive bayes (NB), decision tree (J48), k-nearest neighbor (KNN) and support vector machine (SMO). Besides, the results were also compared with previous researches in gender recognition. The experimental results showed that the CFA was efficient for feature selection. The fusion method was also able to improve the accuracy of the gender recognition rate. The CFA provides much better gender classification results which is 94.51% compared to Nazarloo's work (90.34%) and other classifiers.

Network effects, economies of scale, and lock-in-effects increasingly lead to a concentration of digital resources and capabilities, hindering the free and equitable development of digital entrepreneurship (SDG9), new skills, and jobs (SDG8), especially in small communities (SDG11) and their small and medium-sized enterprises (“SMEs”). To ensure the affordability and accessibility of technologies, promote digital entrepreneurship and community well-being (SDG3), and protect digital rights, we propose data cooperatives [1,2] as a vehicle for secure, trusted, and sovereign data exchange [3,4]. In post-pandemic times, community/SME-led cooperatives can play a vital role by ensuring that supply chains to support digital commons are uninterrupted, resilient, and decentralized [5]. Digital commons and data sovereignty provide communities with affordable and easy access to information and the ability to collectively negotiate data-related decisions. Moreover, cooperative commons (a) provide access to the infrastructure that underpins the modern economy, (b) preserve property rights, and (c) ensure that privatization and monopolization do not further erode self-determination, especially in a world increasingly mediated by AI. Thus, governance plays a significant role in accelerating communities’/SMEs’ digital transformation and addressing their challenges. Cooperatives thrive on digital governance and standards such as open trusted Application Programming Interfaces (APIs) that increase the efficiency, technological capabilities, and capacities of participants and, most importantly, integrate, enable, and accelerate the digital transformation of SMEs in the overall process. This policy paper presents and discusses several transformative use cases for cooperative data governance. The use cases demonstrate how platform/data-cooperatives, and their novel value creation can be leveraged to take digital commons and value chains to a new level of collaboration while addressing the most pressing community issues. The proposed framework for a digital federated and sovereign reference architecture will create a blueprint for sustainable development both in the Global South and North.

. Accurate coastal wave direction and speed forecasts are crucial in coastal and marine engineering, marine energy, maritime transport, fisheries, naval navigation, environmental research, and risk management. Approximately 269 km of Brunei Darussalam's coastline can generate between 15 and 126 GW of wave energy. As part of the preliminary feasibility study of wave energy harvesting in Brunei Darussalam and net zero commitment, in this study, we used two numerical methods, namely, finite difference and spectral element methods, for modeling and simulation of wave speed and direction. The mean error between numerical and analytical solutions was calculated in each simulation. Explanatory data analysis was used to provide insight into the study data. We then proposed wave direction and speed forecasting models using Long Short-Term Memory (LSTM) stacking on the data computed from the Acoustic Doppler Current Profiler (ADCP) sensor data. A univariate time series forecasting approach was adopted for this research. KerasTuner hyperparameter tuning API was used for tuning and optimizing hyperparameters, leading us to build models with the least training and test errors. Seven separate prediction experiments were conducted for wave speed and direction in degree and radian units for the next 1, 3, 6, 8, 10, 12, and 24 hours, respectively. Mean squared error (MSE) was used as a metric for both training and testing. The experimental results show that wave speed forecast has the lowest MSEs compared to direction, regardless of the unit of measure, but has a longer runtime. Moreover, the forecast of direction in the degree unit has the least errors compared to the radian unit; the running time of the latter is higher than that of the former. In the future, we intend to use advanced multivariate time series techniques to forecast wave speed and direction.

Typhoons bring great damages to transmission line systems located in coastal areas. Strong wind and extreme precipitation are the main sources of damaging effects. Transmission lines suffered from wind-driven rain exhibit more susceptibility to damage due to the coupled effect of wind and rain water. This paper presents an integrated numerical simulation framework based on mesoscale WRF model, multiphase CFD model and FEM model to analyze the motions of a transmission line subjected to coupled wind and rain loads during typhoon events. A full-scale transmission line in Zhoushan island is employed to demonstrate the effectiveness of the proposed framework by simulating typhoon evolution in terms of wind fields and rainfall, solving the coupled wind and rain fields around the conductor and predicting the dynamic responses of the transmission line during Super Typhoon Lekima (2019). The results show that the horizontal displacements of the transmission line under the joint actions of wind and rain increases approximately 17%~18% compared to those of wind loads only. It is important to consider the coupled effects of wind-driven rain on conductors in the design of transmission lines under typhoon conditions.

This study delves into the dynamic intersection of artificial intelligence (AI) and English Language Teaching (ELT) within the post-pandemic educational landscape. Grounded in Constructivism, Connectivism, and Technological Pedagogical Content Knowledge (TPACK), this research explores how AI integration impacts language instruction efficiency, benefits and challenges perceived by St. Michael's College students, differences in learning outcomes, and its potential to address the digital divide. Employing a qualitative approach, the study employs a rigorous method that includes intensive in-depth reviews of literature, maximum purposeful sampling, informal interviews, observation, and thematic analysis. Through these methods, data was collected from 30 participants, leading to the identification of five key themes. Findings suggest that AI enhances instructional efficiency, offers personalized learning experiences, and bridges gaps in remote settings. However, challenges and the importance of pedagogical balance emerged. The study underscores the need for adaptive pedagogical strategies to fully harness AI's potential. Future directions and limitations are discussed, emphasizing the study's implications for shaping the future of ELT.

Amidst the dynamic landscape of education, this paper embarks on a transformative journey that explores the integration of Artificial Intelligence (AI) in literature and language education. Through a qualitative exploratory approach, purposeful and maximum variation sampling method, the researcher delves into the experiences of educators and learners, unraveling the multifaceted dimensions of AI-driven pedagogy in SMC. Drawing upon a theoretical framework encompassing Constructivism, Connectivism, and Socio-Cultural Theory, the study examines AI's role in reshaping pedagogical landscapes, fostering critical thinking, and expanding access to education. The results resonate with participants' narratives, unveiling AI's potential in fostering personalized learning pathways, enhancing collaborative engagement, and bridging digital divides. Ethical considerations in AI education are explored, leading to the proposition of responsible guidelines. These findings underline the transformative power of AI in education, aligned with the institution's commitment to quality education and innovation. Overall, the study calls for ongoing exploration, emphasizing the qualitative research method's depth and richness, as well as the theoretical framework's guidance in realizing the study's objectives. As AI continues to shape education's frontiers, this research underscores the significance of adaptability, ethical awareness, and holistic engagement for school administrators, educators, learners, and researchers alike.

Modeling is essential to understand better the generative mechanisms responsible for experimental observations gathered from complex systems. In this work, we are using such an approach to analyze the electrocardiogram (ECG). We present a systematic framework to decompose ECG signals into sums of overlapping lognormal components. We used reinforcement learning to train a deep neural network to estimate the modeling parameters from ECG recorded in babies of 1 to 24 months of age. We demonstrate this model-driven approach by showing how the extracted parameters vary with age. After correction for multiple tests, 10 of 24 modeling parameters showed statistical significance below the 0.01 threshold, with absolute Kendall rank correlation coefficients in the [0.27, 0.51] range. We presented a model-driven approach to the analysis of ECG. The impact of this framework on fundamental science and clinical applications is likely to be increased by further refining the modeling of the physiological mechanisms generating the ECG. By improving the physiological interpretability, this approach can provide a window into latent variables important for understanding the heart-beating process and its control by the autonomous nervous system.

The report details out programming approach for automating warehouse using Answer Set Programming.

In the last decades synthetic jet actuators have gained much interest among the flow control techniques due to their short response time, high jet velocity and absence of traditional piping, that matches the requirements of reduced size and low weight. A synthetic jet is generated by the diaphragm oscillation (generally driven by a piezoelectric element) in a relatively small cavity, producing periodic cavity pressure variations associated with cavity volume changes. The pressured air exhausts through an orifice, converting diaphragm electrodynamic energy into jet kinetic energy. This review paper faces the development of various lumped-element models (LEMs) as practical tools to design and manufacture the actuators. LEMs can quickly predict device performances such as the frequency response in terms of diaphragm displacement, cavity pressure and jet velocity, as well as the efficiency of energy conversion of input Joule power into useful kinetic power of air jet. The actuator performance is analyzed also by varying typical geometric parameters such as cavity height and orifice diameter and length, through a suited dimensionless form of the governing equations. A comprehensive and detailed physical modeling aimed to evaluate the device efficiency is introduced, shedding light on the different stages involved in the process. Overall, the influence of the coupling degree of the two oscillators, the diaphragm and the Helmholtz’s one, on the device performance is discussed throughout the paper.

This research delves into the realm of predictive modeling within artificial intelligence (AI) and introduces an innovative ensemble approach designed to enhance prognostic precision. The proposed methodology, characterized by its ebullient nature, leverages the collective wisdom of diverse predictive models, synthesizing a comprehensive and robust framework. The pursuit of parsimony are paramount, underscoring the need for efficient model architectures that balance predictive acuracy and computational efficiency. Our study meticulously explores the amalgamation of diverse algorithms, encapsulating the intrinsic complexity of real-world phenomena. We navigate the intricate landscape of feature selection, algorithmic diversity, and model combination, fostering a holistic understanding of the prognostic process. The ebullient ensemble emerges as a dynamic solution, harnessing the synergy of constituent models while mitigating the risk of overfitting. To validate the efficacy of our approach, extensive experiments are conducted on diverse datasets, spanning domains such as healthcare, finance, and natural language processing. Comparative analyses demonstrate the superior predictive performance of our ensemble model in comparison to individual algorithms and traditional ensemble methods. Additionally, we delve into interpretability aspects, elucidating the underlying mechanisms that contribute to the model's prognostic prowess. Our research advances the frontier of predictive modeling in AI, offering a nuanced and sophisticated paradigm for prognostication. The ebullient ensemble approach stands as a testament to the synergy achievable through the amalgamation of diverse predictive models, providing a pragmatic and parsimonious avenue for enhanced prognostic acuracy in artificial intelligence applications.

The scientific community has long benefited from the opportunities provided by data reuse. Recognizing the need to identify the challenges and bottlenecks to reuse in the agricultural research community and propose solutions for them, the data reuse working group was started within the AgBioData consortium (https://www.agbiodata.org/) framework. Here, we identify the limitations of data standards, metadata deficiencies, data interoperability, data ownership, data availability, user skill level, resource availability, and equity issues, with a specific focus on agricultural genomics research. We propose possible solutions stakeholders could implement to mitigate and overcome these challenges and provide an optimistic perspective on the future of genomics and transcriptomics data reuse.

To gain insight into the real-life care of patients in the healthcare system, data from hospital information systems and insurance systems are required. Consequently, linking clinical data with claims data is necessary. To ensure their syntactic and semantic interoperability, the Observational Medical Outcomes Partnership (OMOP) Common Data Model (CDM) was chosen. However, there is no detailed guide that would allow researchers to follow a consistent process for data harmonization. Thus, the aim of this paper is to conceptualize a generic data harmonization process for OMOP CDM. For this purpose, we conducted a literature review focusing on publications that address the harmonization of clinical or claims data in OMOP CDM. Subsequently, the process steps used and their chronological order were extracted for each included publication. The results were then compared to derive a generic sequence of the process steps. From 23 publications included, a generic data harmonization process for OMOP CDM was conceptualized, consisting of nine process steps: dataset specification, data profiling, vocabulary identification, coverage analysis of vocabularies, semantic mapping, structural mapping, extract-transform-load-process, qualitative and quantitative data quality analysis. This process can be used as a step-by-step guide to assist other researchers in harmonizing source data in OMOP CDM.

Context: Despite the effort put into developing standards for structuring construction cost, and the strong interest into the field. Most construction companies still perform the process of data gathering and processing manually. That provokes inconsistencies, different criteria when classifying, misclassifications, and the process becomes very time-consuming, particularly on big projects. Additionally, the lack of standardization makes very difficult the cost estimation and comparison tasks. Objective: To create a method to extract and organize construction cost and quantity data into a consistent format and structure, to enable rapid and reliable digital comparison of the content. Method: The approach consists of a two-step method: Firstly, the system implements data mining to review the input document and determine how it is structured based on the position, format, sequence, and content of descriptive and quantitative data. Secondly, the extracted data is processed and classified with a combination of data science and experts’ knowledge to fit a common format. Results: A big variety of information coming from real historical projects has been successfully extracted and processed into a common format with 97.5% of accuracy, using a subset of 5770 assets located on 18 different files, building a solid base for analysis and comparison. Conclusion: A robust and accurate method was developed for extracting hierarchical project cost data to a common machine-readable format to enable rapid and reliable comparison and benchmarking.

The rising importance of Big Data in modern information analysis is supported by vast quantities of user data, but it is only possible to collect sufficient data for all tasks within certain data-gathering contexts. There are many cases where a domain is too novel, too niche, or too sparsely collected to adequately support Big Data tasks. To remedy this, we have created ADG Engine that allows for the generation of additional data that follows the trends and patterns of the data that’s already been collected. Using a database structure that tracks users across different activity types, ADG Engine can use all available information to maximize the authenticity of the generated data. Our efforts are particularly geared towards data analytics by identifying abnormalities in the data and allowing the user to generate normal and abnormal data at custom ratios. In situations where it would be impractical or impossible to expand the available dataset by collecting more data, it can still be possible to move forward with algorithmically expanded data datasets.

Large datasets that enable researchers to perform investigations with unprecedented rigor are growing increasingly common in neuroimaging. Due to the simultaneous increasing popularity of open science, these state-of-the-art datasets are more accessible than ever to researchers around the world. While analysis of these samples has pushed the field forward, they pose a new set of challenges that might cause difficulties for novice users. Here, we offer practical tips for working with large datasets from the end-user’s perspective. We cover all aspects of the data life cycle: from what to consider when downloading and storing the data, to tips on how to become acquainted with a dataset one did not collect, to what to share when communicating results. This manuscript serves as a practical guide one can use when working with large neuroimaging datasets, thus dissolving barriers to scientific discovery.

In the last decades, climate and environmental changes have highlighted the fragility and vulnerability of the landscape, especially in mountain areas where the effects are most severe. The strategy for hazard mitigation must deploy synergistic actions based on a thorough knowledge of the territory and its phenomena to enable integrated and effective land planning and management through suitable communication tools. This study promotes the methodological setup of a Landscape Digital Twin to establish a multi-disciplinary and multi-scalar hazards overview according to a matrix framework implementable over time and space. The original contribution to the research addresses a holistic vision that combines meaningfully qualitative with quantitative approaches to generate risk maps by integrating various indicators within a multi-hazard framework from the socio-economic perspective. This contribution presents road network risk analysis by exploiting flooding and landslide scenarios. The critical road segments or nodes most vulnerable or impacted by network performance and accessibility can be identified with minimal preprocessing from credible open-source sources. The method's applicability is tested in a Piedmont Region, northern Italy case study. The integration proposed will help generate comprehensive risk analysis maps that effectively portray the interconnectedness among natural hazards, infrastructure, and socio-economic factors fostering more resilient decision-making processes.

Modern experimental astroparticle physics features large-scale setups measuring different messengers, namely high-energy particles generated by cosmic accelerators (e.g. supernova remnants, active galactic nuclei, etc): cosmic and gamma rays, neutrinos and recently discovered gravitational waves. Ongoing and future experiments are distributed over the Earth including ground, underground/underwater setups as well as balloon payloads and spacecrafts. The data acquired by these experiments have different formats, storage concepts and publication policies. Such differences are a crucial issue in the era of big data and of multi-messenger analysis strategies in astroparticle physics. We propose a service ASTROPARTICLE.ONLINE in the frame of which we develop an open science system which enables to publish, store, search, select and analyse astroparticle physics data. The cosmic-ray experiments KASCADE-Grande and TAIGA were chosen as pilot experiments to be included in this framework. In the first step of our initiative we will develop and test the following components of the full data life cycle concept: (i) describing, storing and reusing of astroparticle data; (ii) software for performing multi-experiment and multi-messenger analyses like deep-learning methods; (iii) outreach including example applications and tutorial for students and scientists outside the specific research field. In the present paper we describe the concepts of our initiative, and in particular the plans toward a common, federated astroparticle data storage.

As of 2020, public data for game ratings provided by Game Ratings And Administration Committee(GRAC) are more limited than public data for movie and video ratings provided by Korea Media Ratings Board and do not provide data which allow us to see information on ratings clearly and in detail. To get information on game ratings, we need to find information by searching for specific target on homepage which is inconvenient for us. In order to improve such inconvenience and extend scope of provision in public data, the author of this paper intends to study public data API which has been extended based on information on video ratings. To draw items to be extended, this study analyzes data for ratings on homepage of GRAC and designs collection system to build database. This study intends to implement system that provides data collected based on extended public data items in a form which users want. This study is expected to provide information on ratings to GRAC which will strengthen fairness and satisfy game users and people’s rights to know and contribute to promotion and development of game industry.

The study was conducted on applying machine learning and data mining methods to personalizing the treatment. This allows investigating individual patient characteristics. Personalization is built on the clustering method and associative rules. It was suggested to determine the average distance between instances for optimal performance metrics finding. The formalization of the medical data pre-processing stage for finding personalized solutions based on current standards and pharmaceutical protocols is proposed. The model of patient data is built. The paper presents the novel approach to clustering built on ensemble of cluster algorithm with better than k-means algorithm Hopkins metrics. The personalized treatment usually is based on decision tree. Such approach requires a lot of computation time and cannot be paralyzed. Therefore, it is proposed to classify persons by conditions, to determine deviations of parameters from the normative parameters of the group, as well as the average parameters. This made it possible to create a personalized approach to treatment for each patient based on long-term monitoring. According to the results of the analysis, it becomes possible to predict the optimal conditions for a particular patient and to find the medicaments treatment according to personal characteristics.

This paper presents a theoretical framework aimed at improving IoT network cybersecurity by AI-driven anomaly detection in the context of rapid urbanization and the development of smart cities. The framework draws upon the Complex Adaptive Systems Theory, Theory of Planned Behavior, the Technology Acceptance Model, and the Socio-Technical Systems Theory, and intri-cately examines how AI might be integrated into the intricate ecosystem of smart cities to detect and mitigate cyber threats. It emphasizes AI-driven anomaly detection methods as pivotal in-struments that impact cybersecurity enhancement in smart city infrastructures. The proposed framework also highlights the crucial role that human-related factors, including user behavior and adoption, play in determining how effective AI applications are in enhancing cybersecurity in smart cities. It also recognizes the important moderating roles played by outside factors like legislative frameworks, environmental contexts, and technological breakthroughs in the relationship between AI-enabled anomaly detection and enhanced cybersecurity. The goal of this research is to shed light on the interactions between technology and socio-technical dynamics by offering a thorough theoretical understanding of AI's potential in smart city cybersecurity. It highlights the significance of taking into account a variety of contextual aspects when employing AI to strengthen the digital security of urban areas, and provides a strategic direction for future research and practical implementation.

This study presents the manufacturing process driven development of an interlocking metasurface mechanism (ILM) for Fused Filament Fabrication (FFF) with a focus on open-source accessibility. The presented ILM is designed to enable strong contact between to planar surfaces. The mechanism consists of spring elements and locking pins which snap together when forced into contact. The mechanism is designed to optimize mechanical properties, functionality and printability with common FFF printers. The mechanisms is printed from thermoplastic polyurethane (TPU) filament which was selected for its flexibility, crucial for spring element performance and tolerances of the fabrication method. To characterize the designed mechanism a tensile test is carried out to assess the holding force of the ILM. The force-displacement profiles are analyzed and categorized into distinct phases, highlighting the interplay between spring deformation, sliding, and disengagement. The results show variations in holding forces attributed to geometric and material-related factors. The testing results are compared and discussed to a numerical simulation carried out with a frictionless approach with a nonlinear Neo–Hookean material law. The study underscores the importance of meticulous parameter control in 3D printing for consistent and reliable performance of interlocking metasurface mechanisms. The investigation leads to a scalable model of a ILM element pair with a distinct three-phase snapping characteristics ensuring reliable holding capabilities.

In the context of the emergence and development of varieties of English around the globe, this paper focuses on Kuwait, where the use of English has greatly increased since the mid-20th century. Drawing on the principles of nativisation and indigenisation, I investigate substrate- and superstrate-derived discourse-pragmatic markers (DPMs) in Kuwaiti English: the Arabic loanwords alhamdulillah and ya'ni and their English equivalents (e.g. I mean and thankfully). Data are drawn from the Kuwaiti English National Corpus, a spoken corpus of almost 800,000 words containing interviews, samples of situated language use, and mediated data (podcasts, TV, radio and YouTube). Keyness and concordance analyses were performed to identify the frequency and functions of the DPMs in Kuwaiti English compared to reference corpora of British and American English. The analysis also takes into account contextual and sociolinguistic information such as the speakers’ social identity. Results show that the Arabic-derived DPMs are abundant in both formal and informal settings, indicating that they have become an integral part of this variety of English. Their English equivalents perform similar roles, but are vastly less common (with the exception of I mean for ya'ni). Both the Arabic- and English-based markers show somewhat narrowed discourse-pragmatic functions and are more likely to be placed in clause-initial position than in ‘native’ contexts. Their use appears to be linked to the social identity of the speakers.

Intellecta dataset emerges as an innovative synthetic dataset, engineered to enhance the cognitive processing capabilities of contemporary language models. With a composition of 11.53 billion tokens, integrating 8.01 billion tokens of synthetic data with 3.52 billion tokens of rich textbook data, Intellecta is crafted to foster advanced reasoning and comprehensive educational narrative generation. Leveraging the Mixtral-8x7B-Instruct-v0.1 model, the dataset facilitates the generation of complex thought processes and detailed, textbook-style explanations, thus enabling language models to engage in both critical thinking and profound educational discourse. This hybrid dataset stands as a testament to the potential of synthetic data in pushing the boundaries of AI, offering a repository that is not only vast and varied but also refined to align with ethical standards and intellectual rigor.

In the coming years, digital applications and services that continue to use the country's native cloud systems will be huge. By 2023, that will exceed 500 million, according to IDC. This corresponds to the sum of all applications developed in the last 40 years. If you are the one you answered, yes! This article is for you!

This manuscript describes the construction and validation of high resolution daily gridded (0.05° × 0.05°) rainfall and maximum and minimum temperature data for Bangladesh : the Enhancing National Climate Services for Bangladesh Meteorological Department (ENACTS-BMD) dataset. The dataset was generated by merging data from weather stations, satellite products (for rainfall) and reanalysis (for temperature). ENACTS-BMD is the first high-resolution gridded surface meteorological dataset developed specifically for studies of surface climate processes in Bangladesh. Its record begins in January 1981 and is updated in real-time monthly and outputs have daily, decadal and monthly time resolution. The Climate Data Tools (CDT), developed by the International Research Institute for Climate and Society (IRI), Columbia University, is used to generate the dataset. This data processing includes the collection of weather and gridded data, quality control of stations data, downscaling of the reanalysis for temperature, bias correction of both satellite rainfall and downscaled reanalysis of temperature, and the combination of station and bias-corrected gridded data. The ENACTS-BMD dataset is available as an open-access product at BMD’s official website, allowing the enhancement of the provision of services, overcoming the challenges of data quality, availability, and access, promoting at the same time the engagement and use by stakeholders.

The implementation of the European Cohesion Policy aiming at fostering regions competitiveness, economic growth and creation of new jobs is documented over the period 2014–2020 in the publicly available Open Data Portal for the European Structural and Investment funds. On the base of this source, this paper aims at describing the process of data mining and visualization for information production on regional programmes performace in achieving effective expenditure of resouces.

The increasing availability of longitudinal data (repeated numerical observations of same units at different times) requires the development of flexible techniques to automatically detect common errors in such data. Besides obvious and easily identifiable cases, such as missing or out-of-range data, large longitudinal dataset often present problems not easily traceable by the techniques used for generic datasets. In particular, elusive and baffling problems are i) inversion of one or more values from one unit to another; ii) anomalous jumps in the series of values, iii) errors in the timing of the values due to a recalculation operated by the data providers to compensate previous errors. This work proposes a statistical-mathematical approach based on a system of indicators that is able to capture the complexity of the described problems by working at the formal level, regardless of the specific meaning of the data. The proposed approach identifies suspect erroneous data and is applicable in a variety of contexts. We implement this approach in a relevant database of European Higher Education institutions (ETER) by analyzing Total academic staff, that is one of the most important variables, used in empirical analysis as proxy of size and also considered by policy makers at European level.

In the last decade and a half, the world has experienced the outbreak of a range of viruses such as COVID-19, H1N1, flu, Ebola, Zika Virus, Middle East Respiratory Syndrome (MERS), Measles, and West Nile Virus, just to name a few. During these virus outbreaks, the usage and effectiveness of social media platforms increased significantly as such platforms served as virtual communities, enabling their users to share and exchange information, news, perspectives, opinions, ideas, and comments related to the outbreaks. Analysis of this Big Data of conversations related to virus outbreaks using concepts of Natural Language Processing such as Topic Modeling has attracted the attention of researchers from different disciplines such as Healthcare, Epidemiology, Data Science, Medicine, and Computer Science. The recent outbreak of the MPox virus has resulted in a tremendous increase in the usage of Twitter. Prior works in this field have primarily focused on the sentiment analysis and content analysis of these Tweets, and the few works that have focused on topic modeling have multiple limitations. This paper aims to address this research gap and makes two scientific contributions to this field. First, it presents the results of performing Topic Modeling on 601,432 Tweets about the 2022 Mpox outbreak, which were posted on Twitter between May 7, 2022, and March 3, 2023. The results indicate that the conversations on Twitter related to Mpox during this time range may be broadly categorized into four distinct themes - Views and Perspectives about MPox, Updates on Cases and Investigations about Mpox, MPox and the LGBTQIA+ Community, and MPox and COVID-19. Second, the paper presents the findings from the analysis of these Tweets. The results show that the theme that was most popular on Twitter (in terms of the number of Tweets posted) during this time range was - Views and Perspectives about MPox. It is followed by the theme of MPox and the LGBTQIA+ Community, which is followed by the themes of MPox and COVID-19 and Updates on Cases and Investigations about Mpox, respectively. Finally, a comparison with prior works in this field is also presented to highlight the novelty and significance of this research work.

In this paper, we present a method to map information regarding service activity provision residing in governmental portals across European Commission. In order to perform this, we used as a basis the enriched Greek e-GIF ontology, modeling concepts, and relations in one of the two data portals (i.e., Points of Single Contacts) examined, since relevant information on the second was not provided. Mapping consisted in transforming information appearing in governmental portals in RDF format (i.e., as Linked data), in order to be easily exchangeable. Mapping proved a tedious task, since description on how information is modeled in the second Point of Single Contact is not provided and must be extracted in a manual manner.

Background: Observational health data has the potential to be a rich resource to inform clinical practice and regulatory decision making. However, the lack of standard data quality processes makes it difficult to know if these data are research ready. The EHDEN COVID-19 Rapid Col-laboration Call presented the opportunity to assess how the newly developed open-source tool Data Quality Dashboard (DQD) informs the quality of data in a federated network. Methods: 15 Data Partners (DPs) from 10 different countries worked with the EHDEN taskforce to map their data to the OMOP CDM. Throughout the process at least two DQD results were collected and compared for each DP. Results: All DPs showed an improvement in their data quality between the first and last run of the DQD. The DQD excelled at helping DPs identify and fix conformance is-sues but showed less of an impact on completeness and plausibility checks. Conclusions: This is the first study to apply the DQD on multiple, disparate databases across a network. While study-specific checks should still be run, we recommend that all data holders converting their data to the OMOP CDM use the DQD as it ensures conformance to the model specifications and that a database meets a baseline level of completeness and plausibility for use in research.

One of the most remarkable features in the 20th century was the digitalization of technical progress, which changed the output of companies worldwide and became a defining feature of the century. The growth of information technology systems and the implementation of new technical advances, which enhance the integrity, agility and long-term organizational performance of the supply chain, can distinguish a digital supply chain from other supply chains. For example, the Internet of Things (IoT)-enabled information exchange and Big Data analysis might be used to regulate the mismatch between supply and demand. In order to assess contemporary ideas and concepts in the field of data analysis in the context of supply chain management, this literary investigation has been decided. The research was conducted in the form of a comprehensive literature review. In the SLR investigation, a total of 71 papers from leading journals were used. SLR has found that data analytics integrate into supply chain management can have long-term benefits on supply chain management from the input side, i.e., improved strategic development, management and other areas.

During virus outbreaks in the recent past web behavior mining, modeling, and analysis have served as means to examine, explore, interpret, assess, and forecast the worldwide perception, readiness, reactions, and response linked to these virus outbreaks. The recent outbreak of the Marburg Virus disease (MVD), the high fatality rate of MVD, and the conspiracy theory linking the FEMA alert signal in the United States on October 4, 2023, with MVD and a zombie outbreak, resulted in a diverse range of reactions in the general public which has transpired in a surge in web behavior in this context. This resulted in “Marburg Virus” featuring in the list of the top trending topics on Twitter on October 3, 2023, and “Emergency Alert System” and “Zombie” featuring in the list of top trending topics on Twitter on October 4, 2023. No prior work in this field has mined and analyzed the emerging trends in web behavior in this context. The work presented in this paper aims to address this research gap and makes multiple scientific contributions to this field. First, it presents the results of performing time series forecasting of the search interests related to MVD emerging from 216 different regions on a global scale using ARIMA, LSTM, and Autocorrelation. The results of this analysis present the optimal model for forecasting web behavior related to MVD in each of these regions. Second, the correlation between search interests related to MVD and search interests related to zombies (in the context of this conspiracy theory) was investigated. The findings show that there were several regions where there was a statistically significant correlation between MVD-related searches and zombie-related searches (in the context of this conspiracy theory) on Google on October 4, 2023. Finally, the correlation between zombie-related searches (in the context of this conspiracy theory) in the United States and other regions was investigated. This analysis helped to identify those regions where this correlation was statistically significant.

A distinction is made between data rescue (i.e., copying, digitizing and archiving) and data recovery that implies deciphering, interpreting and transforming early instrumental readings and their metadata to obtain high-quality datasets in modern units. This requires a multidisciplinary approach that includes: palaeography and knowledge of Latin and other languages to read the handwritten logs and additional documents; history of science to interpret the original text, data e metadata within the cultural frame of the 17th, 18th and early 19th century; physics and technology to recognize bias of early instruments or calibrations, or to correct for observational bias; astronomy to calculate and transform the original time in canonical hours that started from twilight. The liquid-in-glass thermometer was invented in 1641 and the earliest temperature records started in 1654. Since then, different types of thermometers were invented, based on the thermal expansion of air or selected thermometric liquids with deviation from linearity. Reference points, thermometric scales, calibration methodologies were not comparable, and not always adequately described. Thermometers had various locations and exposures, e.g., indoor, outdoor, on windows, gardens or roofs, facing different directions. Readings were made only one or a few times a day, not necessarily respecting a precise time schedule: this bias is analysed for the most popular combinations of reading times. The time was based on sundials and local Sun, but the hours were counted starting from twilight. In 1789-90 Italy changed system and all cities counted hours from their lower culmination (i.e., local midnight), so that every city had its local time; in 1866, all the Italian cities followed the local time of Rome; in 1893, the whole Italy adopted the present-day system, based on the Coordinated Universal Time and the time zones. In 1873, when the International Meteorological Committee (IMO) was founded, later transformed in World Meteorological Organization (WMO), a standardization of instruments and observational protocols was established, and all data became fully comparable. In the early instrumental period, from 1654 to 1873, the comparison, correction and homogenization of records is quite difficult, mainly because of the scarcity or even absence of metadata. This paper deals about this confused situation, discussing the main problems, but also the methodologies to recognize missing metadata, distinguish indoor from outdoor readings; correct and transform early datasets in unknown or arbitrary units into modern units; finally, in which cases it is possible to reach the quality level required by WMO. The focus is to explain the methodology needed to recover early instrumental records, i.e., the operations that should be performed to interpret, correct, and transform the original raw data into a high-quality dataset of temperature, usable for climate studies.

The World Health Organization (WHO) added Disease X to their shortlist of blueprint priority diseases to represent a hypothetical, unknown pathogen that could cause a future epidemic. During different virus outbreaks of the past, such as COVID-19, Influenza, Lyme Disease, and Zika virus, researchers from various disciplines utilized Google Trends to mine multimodal components of web behavior to study, investigate, and analyze the global awareness, preparedness, and response associated with these respective virus outbreaks. As the world prepares for Disease X, a dataset on web behavior related to Disease X would be crucial to contribute towards the timely advancement of research in this field. Furthermore, none of the prior works in this field have focused on the development of a dataset to compile relevant web behavior data, which would help to prepare for Disease X. To address these research challenges, this work presents a dataset of web behavior related to Disease X, which emerged from different geographic regions of the world, between February 2018 to August 2023. Specifically, this dataset presents the search interests related to Disease X from 94 geographic regions. These regions were chosen for data mining as these regions recorded significant search interests related to Disease X during this timeframe. The dataset was developed by collecting data using Google Trends. The relevant search interests for all these regions for each month in this time range are available in this dataset. This paper also discusses the compliance of this dataset with the FAIR principles of scientific data management. Finally, a brief analysis of specific features of this dataset is presented to uphold the applicability, relevance, and usefulness of this dataset for the investigation of different research questions in the interrelated fields of Big Data, Data Mining, Healthcare, Epidemiology, and Data Analysis.

Mining and analysis of the Big Data of Twitter conversations have been of significant interest to the scientific community in the fields of healthcare, epidemiology, big data, data science, computer science, and their related areas, as can be seen from several works in the last few years that focused on sentiment analysis and other forms of text analysis of Tweets related to Ebola, E-Coli, Dengue, Human papillomavirus (HPV), Middle East Respiratory Syndrome (MERS), Measles, Zika virus, H1N1, influenza-like illness, swine flu, flu, Cholera, Listeriosis, cancer, Liver Disease, Inflammatory Bowel Disease, kidney disease, lupus, Parkinson's, Diphtheria, and West Nile virus. The recent outbreaks of COVID-19 and MPox have served as "catalysts" for Twitter usage related to seeking and sharing information, views, opinions, and sentiments involving both these viruses. While there have been a few works published in the last few months that focused on performing sentiment analysis of Tweets related to either COVID-19 or MPox, none of the prior works in this field thus far involved analysis of Tweets focusing on both COVID-19 and MPox at the same time. With an aim to address this research gap, a total of 61,862 Tweets that focused on Mpox and COVID-19 simultaneously, posted between May 7, 2022, to March 3, 2023, were studied to perform sentiment analysis and text analysis. The findings of this study are manifold. First, the results of sentiment analysis show that almost half the Tweets (the actual percentage is 46.88%) had a negative sentiment. It was followed by Tweets that had a positive sentiment (31.97%) and Tweets that had a neutral sentiment (21.14%). Second, this paper presents the top 50 hashtags that were used in these Tweets. Third, it presents the top 100 most frequently used words that are featured in these Tweets. The findings of text analysis show that some of the commonly used words involved directly referring to either or both viruses. In addition to this, the presence of words such as "Polio", "Biden", "Ukraine", "HIV", "climate", and "Ebola" in the list of the top 100 most frequent words indicate that topics of conversations on Twitter in the context of COVID-19 and MPox also included a high level of interest related to other viruses, President Biden, and Ukraine. Finally, a comprehensive comparative study that involves a comparison of this work with 49 prior works in this field is presented to uphold the scientific contributions and relevance of the same.

Information has been and will be a vital element for a person or department groups in an organization. That is why there are technologies that help us to give them the proper management of data; Business Intelligence is responsible for bringing technological solutions that correctly and effectively manage the entire volume of necessary and important information for companies. Among the solutions offered by Business Intelligence are Data Warehouses, Data Mining, among other business technologies that working together achieve the objectives proposed by an organization. It is important to highlight that these business technologies have been present since the 50's and have been evolving through time, improving processes, infrastructure, methodologies and implementing new technologies, which have helped to correct past mistakes based on information management for companies. There are questions about Business Intelligence. Could it be that in the not-too-distant future it will be used as an essential standard or norm in any organization for data management, since it provides many benefits and avoids failures at the time of classifying information. On the other hand, Cloud storage has been the best alternative to safeguard information and not depend on physical storage media, which are not 100% secure and are exposed to partial or total loss of information, by presenting hardware failures or security failures due to mishandling that can be given to such information.

Background: Real-world data (RWD) related to the health status and care of cancer patients reflect the ongoing medical practice, and their analysis yields essential real-world evidence. Advanced information technologies are vital for their collection, qualification, and reuse in research projects. Methods: UNICANCER, the French federation of comprehensive cancer centres, has innovated a unique research network : Consore. This potent federated tool enables the analysis of data from millions of cancer patients across eleven French hospitals. Results: Currently operational within eleven French cancer centres, Consore employs natural language processing to structure the therapeutic management data of approximately 1.3 million cancer patients. This data originates from their electronic medical records, encompassing about 65 millions of medical records. Thanks to the structured data, which is harmonized within a common data model, and its federated search tool, Consore can create patient cohorts based on patient or tumor characteristics, and treatment modalities. This ability to derive larger cohorts is particularly attractive when studying rare cancers. Conclusions: Consore serves as a tremendous data mining instrument that propels French cancer centres into the big data era. With its federated technical architecture and unique shared data model, Consore facilitates compliance to regulations and acceleration of cancer research projects.

Nowadays, information security is a challenge especially when transmitted or shared in public clouds. Many of researchers have been proposed technique which fails to provide data integrity, security, authentication and another issue related to sensitivity data. The most common techniques were used to protect data during transmission on public cloud are cryptography, steganography, and compression. The proposed scheme suggests an entirely new approach for data security on public cloud. Authors have suggested an entirely new approach that completely makes secret data invisible behind carrier object and it is not been detected with the image performance parameters like PSNR, MSE, entropy and others. The details of results are explain in result section of paper. Proposed technique have better outcome than any other existing technique as a security mechanism on a public cloud. Primary focus of suggested approach is to minimize integrity loss of public storage data due to unrestricted access rights by uses. To improve reusability of carrier even after data concealed is really a challenging task and achieved through suggested approach.

The aim of this article is to summarize recent bioinformatic and statistical developments applicable to NMR-based metabolomics. Extracting relevant information from large multivariate datasets by statistical data analysis strategies may be of considerable complexity. Typical tasks comprise for example classification of specimens, identification of differentially produced metabolites, and estimation of fold changes. In this context it is of prime importance to minimize contributions from unwanted biases and experimental variance prior to these analyses. This is the goal of data normalization. Therefore, special emphasize is given to different data normalization strategies. In the first part, we will discuss the requirements and the pros and cons for a variety of commonly applied strategies. In the second part, we will concentrate on possible solutions in case that the requirements for the standard strategies are not fulfilled. In the last part, very recent developments will be discussed that allow reliable estimation of metabolic signatures for sample classification without prior data normalization. In this contribution special emphasis will be given to techniques that have worked well in our hands.

Wave buoy measurements were carried out near the north-eastern Black Sea coast at the natural reserve Utrish in 2020-2021. In total, about 11 months of data records were collected during two stages of the experiment at 600 and 1500 meters offshore and depths of 18 and 42 meters. The measured waves propagate almost exclusively from the seaward directions. Generally, the waves do not follow the local wind directions, thus, implying a mixed sea state. Nevertheless, dimensionless wave heights and periods appears to be quite close to the previously established empirical laws for the wind-driven seas. The results of the wave turbulence theory are applied for estimates of spectral energy fluxes and their correspondence to the energy flux from the turbulent wind pulsations. These estimates are consistent with today's understanding of wind-wave interaction. It is shown that the main fraction of the wind energy flux goes to the direct Kolmogorov-Zakharov cascade to high wave frequencies and then to dissipation in small scales. Less than 1% of the wind energy flux is directed to low frequency band (the so-called inverse Kolmogorov-Zakharov cascade), thus, providing wave energy growth.

For the emerging autonomous swarm technology, from the perspective of systems science and systems engineering, there must be some novel elements and methods to aggregate multiple systems into a group, which distinguish with the general components with specific functions, and we expect to provide the presentation of their existence in the swarm development processes. The inspiration of our methodology origins from the integration of swarm ontology, multi-paradigm modeling, multi-agent system, cyber-physical system, etc. Therefore, we choose the model-driven technology as a framework to acquire an approach of model representation across the multiple levels of abstraction and composition. The autonomous strategic mechanism is defined and formed in parallel with ConOps analysis and systems design, so as to effectively solve the cognitive problem of emergence caused by the nonlinear causation among individual and whole behaviors. This approach highlights to use the MBSE processes and their artifacts to embed the meso mechanism to integrate the operational and the functional, and which means to connect the macro and micro aspects in formalism and so to become a whole with its expected goals, and then to verify and validate within a L-V-C simulation environment.

We consider a class of density-driven flow problems. We are particularly interested in the problem of the salinization of coastal aquifers. We consider the Henry saltwater intrusion problem with uncertain porosity, permeability, and recharge parameters as a test case. The reason for the presence of uncertainties is the lack of knowledge, inaccurate measurements, and inability to measure parameters at each spatial or time location. This problem is nonlinear and time-dependent. The solution is the salt mass fraction, which is uncertain and changes in time. Uncertainties in porosity, permeability, recharge, and mass fraction are modeled using random fields. This work investigates the applicability of the well-known multilevel Monte Carlo (MLMC) method for such problems. The MLMC method can reduce the total computational and storage costs. Moreover, the MLMC method runs multiple scenarios on different spatial and time meshes and then estimates the mean value of the mass fraction. The parallelization is performed in both the physical space and stochastic space. To solve every deterministic scenario, we run the parallel multigrid solver ug4 in a black-box fashion. We use the solution obtained from the quasi-Monte Carlo method as a reference solution.

With the rise of powerful computational technologies, healthcare systems are going through a paradigm shift to the era of healthcare 5.0, also known as" smart healthcare". This new-age healthcare system not only enhances the life of patients but also aims to reduce healthcare costs significantly. People's health data collected through various means, including various Internet of Things (IoT) devices, is too sensitive to be regulated by particular organisations owing to increasing privacy and security threats. The sheer size of data makes it difficult for centralised bodies to regulate, due to which third-party involvement is introduced, which again poses threats to the privacy of the data holder. Motivated by the abovementioned gaps, we propose a decentralised approach using Ethereum blockchain technology and Oasis protocol. The patient-driven solution approach effectively solves the privacy problem by providing complete control of data to the owner. Along with this, byproducts such as fine-grained access control and on-chain data processing capabilities are also obtained.

Although Cable driven rehabilitation devices (CDRD) have advantages over traditional link-driven devices, including lightweight, ease of reconfiguration, remote actuation, etc, the majority of existing lower-limb CDRD is limited to rehabilitation in the sagittal plane. In this work, we extend our previous sagittal plane model (2DOF) to accommodate hip motion in the frontal plane (abduction/adduction) toward studying the feasibility of tracking bi-planar motion (combined frontal and sagittal plane motion) via intra-planar cable routing. Two optimization problems have been formulated to estimate an optimal location of the hip cuffs, first to estimate the optimal cuff location at each time step to identify a single ‘averaged’ optimal cuff location and second to calculate a single optimal cuff location for the entire gait cycle. The optimization solutions identified for the 3DOF model revealed that optimization of the location of cuffs on the anterior and posterior side of the hip joint for 4 cable configuration is not sufficient to generate the desired bi-planar motion. For simultaneous tracking of the bi-planar motion, 2 additional cables have been added at hip joints and are routed in an intra-planar manner. The simulation result with the 3DOF model confirmed successful bi-planar trajectory tracking. The various number of cables and cable routings for tracking bi-planar motion will be studied in future work.

Economic expedience of waste heat recovery systems (WHRS), especially for low temperature difference applications, is often questionable due to high capital investments and long pay-back periods. By its simple design isobaric expansion (IE) machines could provide a viable pathway to utilize otherwise unprofitable waste heat streams for power generation and particularly for pumping liquids and compression of gases. Different engine configurations are presented and discussed. A new method of modelling and calculation of the IE process and efficiency is used on IE cycles with various pure and mixtures as a working fluid. Some interesting cases are presented. It is shown in this paper, that the simplest non-regenerative IE engines are efficient at low temperature differences between a heat source and heat sink. Efficiency of non-regenerative IE process with pure working fluid can be very high approaching Carnot efficiency at low pressure and heat source/heat sink temperature differences. Regeneration permits to increase efficiency of the IE-cycle to some extent. Application of mixed working fluids in combination with regeneration permits to significantly increase the range of high efficiencies to much larger temperature and pressure differences.

Ethnobotany has been, for too long, a descriptive discipline. However, ethnobotanists are increasingly calling for a paradigm shift towards the formulation of unifying theories and hypothesis-driven research in ethnobotany. Here, we formulated a theory, termed time-since-introduction theory, to explain the integration of alien plants into local pharmacopoeias in their recipient environment. This theory suggests that the factor time is paramount in determining which alien plants are more likely to be included in the medicinal flora of the areas they are introduced in. The theory relies on three hypotheses, the availability and versatility hypotheses alongside the residence time hypothesis newly proposed in the present study. We tested this theory by fitting a structural equation model to ethnobotanical data collected on South Africa’s alien woody flora. Although residence time is a direct predictor of medicinal status of alien plants, it is a better predictor when mediated through plant versatility. These findings are in support of the theory, and we consequently proposed a framework with which to understand different paths linking all three hypotheses. Collectively, our study shows the value of time in the development of ethnobotanical knowledge and fully responds to the pressing call for paradigm shift in ethnobotany.

Staphylococcus aureus is a high-priority pathogen causing severe infections with high morbidity and mortality worldwide. Many S. aureus strains are methicillin-resistant (MRSA) or even multi-drug resistant. It is one of the most successful and prominent modern pathogens. An effective fight against S. aureus infections requires novel targets for antimicrobial and antistaphylococcal therapies. Recent advances in whole-genome sequencing and high-throughput techniques facilitate the generation of genome-scale metabolic models (GEMs). Among the multiple applications of GEMs is drug-targeting in pathogens. Hence, comprehensive and predictive metabolic reconstructions of S. aureus could facilitate the identification of novel targets for antimicrobial therapies. This review aims at giving an overview of all available GEMs of multiple S. aureus strains. We downloaded all 114 available GEMs of S. aureus for further analysis. The scope of each model was evaluated, including the number of reactions, metabolites, and genes.Furthermore, all models were quality-controlled using Mᴇᴍᴏᴛᴇ, an open-source application with standardized metabolic tests. Growth capabilities and model similarities were examined. This review should lead as a guide for choosing the appropriate GEM for a given research question. With the information about the availability, the format, and the strengths and potentials of each model, one can either choose an existing model or combine several models to create models with even higher predictive values. This facilitates model-driven discoveries of novel antimicrobial targets to fight multi-drug resistant S. aureus strains.

Offshore wind farms are increasingly built in the North Sea and the number of HVDC systems transmitting the wind power to shore increases as well. To connect offshore wind farms to adjacent AC transmission systems, onshore and offshore modular multilevel converters transform the transmitted power from AC to DC and vice versa. Besides, modern wind farms mainly use wind turbines connected to the offshore point of common coupling via voltage source converters. However, converters and their control systems can cause unwanted interactions, referred to as converter-driven stability problems. The resulting instabilities can be predicted by applying an impedance-based analysis in the frequency domain. Considering that the converter models and system data are often confidential and cannot be exchanged in real systems, this paper proposes an enhanced impedance measurement method suitable for black-box applications to investigate the interactions. The proposed method is applied to assess an offshore HVDC system’s converter-driven stability, using impedance measurements of laboratory converters and a wind turbine converter controller replica. The results show that the onshore modular multilevel converter’s interactions with AC grids of moderate short-circuit ratios can lead to instabilities. The offshore system analysis reveals that considering the offshore grid topology is crucial for assessing interactions between the wind turbine controllers and the offshore modular multilevel converter. It is shown that different stability margins result from varying offshore grid layouts.

The unsteady Ekman problem involves finding the response of the near-surface currents to wind stress forcing under linearized dynamics. Its solution can be conveniently framed in the frequency domain in terms of a quantity that is known as the transfer function, the Fourier transform of the impulse response function. In this paper, a theoretical investigation of a fairly general transfer function form is undertaken with the goal of paving the way for future observational studies. Building on earlier work, we consider in detail the transfer function arising from a linearly-varying profile of the vertical eddy viscosity, subject to a no-slip lower boundary condition at a finite depth. The linearized horizontal momentum equations are shown to transform to a modified Bessel’s equation for the transfer function. Two self-similarities, or rescalings that each effectively eliminate one independent variable, are identified, enabling the dependence of the transfer function on its parameters to be more readily assessed. A systematic investigation of asymptotic behaviors of the transfer function is then undertaken, yielding expressions appropriate for eighteen different regimes, and unifying the results from numerous earlier studies. A solution to a numerical overflow problem that arises in the computation of the transfer function is also found. All numerical code associated with this paper is distributed freely for use by the community.

Multiferroics, showing both ferroelectric and magnetic order, are promising candidates for future electronic devices. Especially, the fundamental understanding of ferroelectric switching is of key relevance for further improvements, which however is rarely reported in literature. On a prime example for a spin-driven multiferroic, LiCuVO₄, we present an extensive study of the ferroelectric order and the switching behavior as function of external electric and magnetic fields. From frequency-dependent polarization switching and using the Ishibashi-Orihara theory, we deduce the existence of ferroelectric domains and domain-walls. These have to be related to counterclockwise and clockwise spin-spirals leading to the formation of multiferroic domains. A novel measurement – multiferroic hysteresis loop – is established to analyze the electrical polarization simultaneously as a function of electrical and magnetic fields. This technique allows characterizing the complex coupling between ferroelectric and magnetic order in multiferroic LiCuVO₄.

A three-dimensional, unstructured grid, hydrodynamic and suspended-sediment transport model (i.e., SELFE-SED) was developed to simulate temporal and spatial variations of suspended sediment and was applied to the subtropical subalpine Tsuei-Feng Lake (TFL) of Taiwan. The model was validated with measured water level and suspended‑sediment concentration in 2009, 2010, and 2011. The overall model simulation results are in quantitative agreement with the observational data. The validated model was then applied to explore the most important parameter that affects the suspended-sediment concentration and to investigate the effect of wind stress on the mean current and suspended‑sediment distribution in this shallow lake. Modeling results of sensitivity analysis reveal that the settling velocity is a crucial parameter and erosion rate is less important in the suspended-sediment transport model. Remarkable lake circulation was found based on the strength of wind speed and wind direction. Strong wind would result in higher mean current in the top layer and suspended-sediment distribution in the top and bottom layers. This study demonstrated that the wind stress played a significant influence on mean circulation and suspended-sediment transport in a shallow lake.

The numerical simulation of entropy generation at mixed natural free and forced convection flow in a square lid-driven cavity filled with an eletrically conducting binary fluids saturated porous media in the presence of a magnetic field is performed in this investigation. Both the top and bottom horizontal walls of the cavity are kept at constant and different temperatures while the left and right vertical walls are adiabatic and insulated. The magnetic field is applied in normal direction to the cavity. The Darcy model, including Brinkman term relative to viscous effects and Forchheimer term due to inertial forces, is used for the momentum equations, and the SIMPLER algorithm, based on the control volume finite-element method approach is used to solve the pressure –velocity coupling. The flow pattern and the heat transfer characteristics inside the cavity are presented in the form of isotherms, streamlines and isentropic lines and average Nusselt number trend. The entropy generation rate is determined for various values of Darcy number (10^-3 ≤ Da ≤ 1) and for a range of Hartmann number (0 ≤ Ha ≤ 10²). This study is limited to Pr = 7 which corresponds to water. It is observed that entropy generation is very affected by the variations of dimensionless control parameters considered.

In the age of the digital economy, the security and privacy for multimedia systems issues are increasingly manifested in the form of data. The level of data protection governance capability determines whether the security and privacy of multimedia systems can be protected. In recent years, China has introduced laws and regulations on the protection of personal information, personal privacy, data security, and cyber-security. Although data protection is still to be improved, China has been refining the provisions on data security management through practice and the adoption of supporting regulations.

As data driven models gain importance in driving decisions and processes, recently it becomes increasingly important to visualize the data with both speed and accuracy. A massive amount of data is presently generated in the educational sphere from various learning platforms, tools, and institutions. Visual analytics of educational big data has capability to improve student learning, develop strategies for personalized learning, and improve faculty productivity. How-ever, there are limited advancements in the education domain for data-driven decision making leveraging the recent advancements in the field of machine learning. Some of the recent tools such as Tableau, Power BI, Microsoft Azure suite, Sisense etc. leverage artificial intelligence and machine learning techniques to visualize data and generate insights out of it, however their ap-plicability in educational advances is limited. This paper focuses on leveraging machine learn-ing and visualization techniques to demonstrate their utility through a practical implementation using k-12 state assessment data compiled from the institutional websites of the State of Texas and Louisiana. Effective modeling and predictive analytics are the focus of the sample use case presented in this research. Our approach demonstrates the applicability of web technology in conjunction with machine learning to provide a cost-effective and timely solution to visualize and analyze big educational data. Additionally, ad-hoc visualization provides contextual anal-ysis within areas of concern for Education Agencies (EA).

In the information age today, data are getting more and more important. While other industries achieve tangible improvement by applying cutting edge information technology, the construction industry is still far from being enough. Cost, schedule, and performance control are three major functions in the project execution phase. Along with their individual importance, cost-schedule integration has been a significant challenge over the past five decades in the construction industry. Although a lot of efforts have been put into this development, there is no method used in construction practice. The purpose of this study is to propose a new method to integrate cost and schedule data using big data technology. The proposed algorithm is designed to provide data integrity and flexibility in the integration process, considerable time reduction on building and changing database, and practical use in a construction site. It is expected that the proposed method can transform the current way that field engineers regard information management as one of the troublesome tasks in a data-friendly way.