Strong-aroma Baijiu is a traditional Chinese spirit distilled from grains that undergo solid-state fermentation. At the end of each fermentation cycle, a significant quantity of Huangshui accumulates at the bottom of the fermentation pit, constituting one of the primary by-products in the brewing process of strong-flavor liquor. In this report, the chemical component analysis of Huangshui obtained from a strong-flavor liquor factory revealed a diverse array of organic acids, alcohols, esters, starch, reducing sugars, amino acids, and other compounds present in Huangshui. Additionally, two specialized solid-state fermentation models were developed to investigate the formation process of Huangshui. Our findings demonstrate a positive correlation between the yield of Huangshui and the initial moisture content of fermented grains. It is concluded that Huangshui is the percolate produced during the solid-state brewing process of strong-flavor liquor, with its water content originating from the initial moisture of fermented grains.

Gilbert's syndrome (GS) is a common hereditary condition characterized by mild increases in serum bilirubin levels due to inherited defects in bilirubin metabolism. This review, based on data from peer-reviewed articles and journals spanning from 1977 to January 2024, provides a comprehensive overview of over four decades of research on GS. Early studies primarily focused on defining the clinical and genetic characteristics of the syndrome, laying the foundation for subsequent investigations. More recent research has delved into the genetic mechanisms underlying the reduced expression of bilirubin UDP-glucuronosyltransferase, which has significantly enhanced our understanding of the pathogenesis of GS. Furthermore, recent studies have shed light on the clinical implications of GS, including its association with non-alcoholic fatty liver disease and mortality risk, highlighting the complex interplay between genetic factors, bilirubin metabolism, and clinical outcomes. Despite its generally benign nature, thorough research is essential to fully understand the impact of GS on patients' lives. This review emphasizes the importance of ongoing research to deepen our understanding of GS and its broader implications.

The space exploration landscape has transformed dramatically over the past several decades, with a significant rise in the number of annual launches. Key factors driving this increase include technological advancements, the miniaturization of satellites, and the surge in commercial satellite deployments for communication, Earth observation, and remote sensing. This paper examines the evolution of space activities from the launch of Sputnik 1 in 1957 to recent developments in commercial spaceflight and international collaborations. The paper discusses notable milestones in space exploration history, including early space missions, Apollo Moon landings, and the development of space stations like the International Space Station. It highlights the shift from state-led space programs to a more diverse landscape, characterized by private sector involvement and international partnerships. The "Space 4.0" phase, beginning around 2006, has seen the entry of commercial players like SpaceX, leading to a significant upsurge in orbital launches. Statistical data reveals an upward trend in launch activity, with over 200 launches in 2023 alone, driven by large satellite constellations like SpaceX's Starlink and the steady growth of China's space program. The increasing launch rate poses challenges such as space debris, emphasizing the need for mitigation strategies. Looking ahead, the paper projects a continued increase in launch activity, with over 150 launches expected annually by 2026 and 200-300 launches by 2040. Commercial space ventures, deep space exploration, lunar activities, and space tourism drive this growth. The paper concludes by emphasizing the importance of addressing space debris and promoting the long-term sustainability of space activities, which is crucial as humanity's presence in space continues to expand.

Ten new Schiff bases, including thiocarbohydrazone derivatives (1–10), were synthesized using an efficient, uncomplicated, and environmentally friendly approach using the reaction of alkyl-substituted aldehydes. The thiocarbohydrazones that were obtained were derived from o-phthalaldehyde. The chemical structures of the compounds were identified by the utilization of UV-Vis spectroscopy, Fourier transform infrared (FT-IR), ¹H nuclear magnetic resonance (¹H NMR), ¹³C nuclear magnetic resonance (¹³C NMR), and elemental analysis methods. The thermal stability of thiocarbohydrazones was examined using thermogravimetric analysis (TGA-DSC). Investigations were conducted on urease inhibition tests, pharmacokinetic property research, and molecular docking. The collection of samples with the urease enzyme revealed significant molecular docking findings, with MolDock scores ranging from -153 to -189. The compounds have the potential to be effective drug candidates for treating certain diseases, as indicated by the consistent results of molecular docking, urease inhibition tests, and pharmacokinetic characteristics investigations.

Reservoir routing has been a routine procedure in hydrology, hydraulics and water management. It is typically based on the mass balance (continuity equation) and a conceptual equation relating storage and outflow. If the latter is linear, then there exists an analytical solution of the resulting differential equation, which can directly be utilized to find the outflow from known inflow, and to obtain macroscopic characteristics of the process, such as response and residence times, and their distribution functions. Here we streamline the reservoir routing framework and extend it to find approximate solutions for nonlinear cases. The proposed framework can also be useful for climatic tasks, such as describing the mass balance of atmospheric carbon dioxide and determining characteristic residence times, which have been an issue of controversy. Application of the theoretical framework results in excellent agreement with real world data. In this manner, we easily quantify the atmospheric carbon exchanges, and obtain reliable and intuitive results, without the need to resort to complex climate models. The mean residence time of atmospheric carbon dioxide turns out to be no more than four years and the response time is smaller than that, thus opposing the much longer mainstream estimates.

Abstract: Although experimental attempts to measure a single molecule/particle at room temperature or under physiological conditions without immobilization, for example on a surface, or without hydrodynamic flow have so far failed, this failure has given impetus to the underlying theory of Brownian motion towards its stochastic due to diffusion. Quantifying the thermodynamic jitter of molecules/particles inspires many and forms the theoretical basis of single-molecule/single-particle biophysics and biochemistry. For the first time, our simulation results for a live cell (cytoplasm) show that the tracks of individual single molecules are localized in Brownian motion, while there is fanning out in fractal diffusion (anomalous diffusion).

In order to solve the problem of large eddy current loss and high temperature rise caused by large amount of permanent magnet, a new type of combined magnetic pole permanent magnet motor is proposed in this paper. The sinusoidal distribution subdomain model of non-uniform air gap rotor is established by using Laplace equation, and the analytical expression of eddy current loss of rotor in uniform air-gap and non-uniform air-gap is derived. The effect of rotor eccentricity on eddy current loss is obtained. According to the characteristics of distributed winding of non-uniform air gap combined pole permanent magnet motor, equivalent treatment is performed to obtain the equivalent thermal conductivity, so as to establish equivalent thermal network model of motor, calculate the temperature value of each component of the motor, and verify the correctness of the thermal network model through the method of magnetothermal bidirectional coupling. Finally, an experimental platform is set up to carry out temperature rise experiments on the two prototypes respectively. Experimental results show that the non-uniform air-gap rotor structure can effectively reduce the rotor eddy current loss and motor temperature rise, and also verify the accuracy of the analytical model calculation results.

Background/Objectives: Although the role of F-18 FDG PET/CT imaging is well established in oncology, its diagnostic value in routine monitoring for recurrent colorectal cancer (CRC) is still controversial. The aim was to evaluate the diagnostic value of FDG PET/CT in detecting recurrent CRC in correlation with CEA, CA 19-9 levels, and conventional imaging modalities (CIM). Methods: Between 2009 and 2023, we retrospectively studied 134 CRC patients referred for FDG PET/CT imaging on the suspicion of recurrence based on elevated CEA and/or CA 19-9, and/or equivocal radiological findings. According to the Institutional Tumor Board CRC protocol, after initial treatment which was dependent on TNM stage (neoadjuvant therapy, primary resection or adjuvant treatment), patients underwent a standard 5-year surveillance including CEA and CA 19-9 measurements, CIM, and colonoscopy every 6 months. The statistics including univariate and multivariable analyses were conducted using the IBM SPSS 20.0 statistical software. P-values <0.05 were considered statistically significant. Results: Recurrent CRC was confirmed in 54/134 (40.3%) patients with elevated tumor markers. FDG PET/CT shows high diagnostic performance in detecting recurrent CRC with sensitivity, specificity, PPV, NPV, and accuracy of 94.4%, 82.5%, 78.5%, 95.7%, and 87.3%, respectively. The CEA shows a high sensitivity of 98.1%, but both low specificity and accuracy of 15% and 48.5%, respectively. The sensitivity, specificity, and accuracy, for CA 19-9 and CIM for the correct diagnosis in CRC patients were: 44.4%, 67.5%, 58.2%, and 51.9%, 98.8%, 79.9%, respectively. The AUC for FDG PET/CT, elevated CEA levels, CIM, and elevated CA 19-9 levels was 0.885 (95% CI: 0.824-0.946; p<0.001), 0.844 (95% CI: 0.772-0.916; p<0.001), 0.753 (95% CI: 0.612-0.844; p<0.001); and 0.547 (95% CI: 0.442-0.652; p=0.358). Univariate analysis shows that both FDG PET/CT- and CIM-positive results were highly associated with CRC recurrence (p<0.001 and p<0.001, respectively), while gender, mucinous tumor type, presence of initial lymph node metastasis (N+), and presence of initial distant metastasis (M+) have no significance (p=0.211, p=0.158, p=0.583, and p=0.201, respectively). Our multivariate analysis shows that independent predictors for CRC recurrence are: positive FDG PET/CT scans (p<0.001), positive CIM results (p=0.001) and elevated CA19-9 levels (p=0.023). Although CA 19-9 was not detected as a statistically significant predictor in the univariate analysis (p=0.358), in a multivariate analysis it was recognized as a significant predicting factor in detecting CRC recurrence (p=0.023). Conclusions: FDG PET/CT shows a high diagnostic efficacy in CRC recurrence detection, in correlation with CEA levels, CA 19-9 levels, and CIM. This imaging modality should be routinely integrated into the postoperative follow-op in patients with elevated tumor markers.

Semaglutide is a potent GLP-1 receptor agonist used in the treatment of type 2 diabetes mellitus due to its ability to regulate blood glucose levels and promote weight loss. On July 26, 2021, with a manually defined set of computational structural and biophysical analysis, a simple Val27-Arg28 exchange was for the first time introduced in the backbone of semaglutide to strengthen the semaglutide-GLP-1R binding affinity. In this article, a comprehensive structural and biophysical analysis approach is for the first time proposed towards an exhaustive exploration of the semaglutide-GLP-1R sequence space for the design of semaglutide analogues with elevated binding affinity to GLP-1R, thereby potentially enhancing therapeutic efficacy of structurally conceivable semaglutide analogues. Through structure biophysics-based rational design and computational modeling, this article puts forward a set of semaglutide analogues and calculated their binding affinities to GLP-1R, with one particular semaglutide analogue-GLP-1R structural model reaching a K_d of 3.0 × 10^-8 M, while the K_d is 3.4 × 10^-6 M for the binding of native semaglutide to GLP-1. Overall, the computationally designed semaglutide analogues here constitute a hopeful approach for developing GLP-1 receptor agonists with improved efficacy for the treatment of diabetes and weight management in future.

Antimicrobial resistance (AMR) poses a critical global health threat, leading to approximately 1.27 million deaths annually from infectious diseases resistant to existing antibiotics. Factors such as antibiotic misuse and environmental contamination have accelerated AMR, with the COVID-19 pandemic exacerbating the issue due to increased antibiotic usage. However, the development of new antibiotics has stagnated, with only a few approved in recent years, and many facing resistance. Among the priority pathogens identified by the WHO, Pseudomonas aeruginosa stands out as a significant concern due to its multidrug resistance and virulence. P. aeruginosa infections are challenging to treat due to intrinsic and acquired resistance mechanisms, as well as its ability to form biofilms. Additionally, P. aeruginosa produces a plethora of virulence factors, including proteases, siderophores, and toxins, further complicating treatment. Quorum sensing (QS) systems play a crucial role in regulating bacterial physiology and virulence factor expression. P. aeruginosa employs three QS systems, making it an attractive target for quorum quenching (QQ) strategies. Enzymes such as AHL lactonases, acylases, and oxidoreductases have shown promise in inhibiting QS, thus reducing virulence without impacting bacterial growth. Furthermore, natural QS inhibitors produced by various organisms offer potential therapeutic alternatives. Despite promising results in vitro, translating QQ strategies to clinical settings remains challenging. Nevertheless, QQ represents a novel approach in combating multidrug-resistant infections and warrants further investigation as a complementary therapeutic strategy alongside traditional antibiotics. This review summarizes enzymes with Qurorum Quenching activity evaluated against the pathogen P. aeruginosa and their potential applications in combination therapies.

Verification of inclusivity of molecular detection methods gives indications on the reliability of viral infections diagnosis because of the tendency of viral pathogens to undergo sequence variation. This study was aimed to select inclusive probe based reverse transcription quantitative PCR (RT-qPCR) assays for the diagnosis of the most widespread and detrimental viruses infecting honeybees, namely the acute bee paralysis virus (ABPV), the black queen cell virus (BQCV), the chronic paralysis bee virus (CBPV), the deformed wing virus variants A (DWVA) and B (DWVB), and the sacbrood virus (SBV). Therefore, detection methods previously described were re-evaluated in silico for specificity and inclusivity. Based on this evaluation, selected methods were modified or new ones were designed and tested in duplex RT-qPCR reactions. The limits of detection (LODs), effect of multiplexing on sensitivity and viral RNA quantification potential in bees and hive debris were assessed. This study made available diagnostic assays able to detect an increased number of virus variants compared to previously described tests and two viral pathogens in a single PCR reaction.

The energy transition is a challenge that affects all sectors, from transport to civil structures and industry. With reference to the industrial sector, the greatest need is the decarbonisation of industries energy-intensive, such as producers of iron and steel, aluminium, cement, petrochemicals, paper, etc. In particular, the steel industry is a hard to abate high-emissivity industry which due to chemical processes and high thermal demands (often above 500 °C) contributed to 7.4% of global CO₂ in the year 2021. This paper has explored the potential applications of hydrogen in the hard-to-abate sectors, highlighting its versatility and significance in decarbonization efforts. It provides an overview of hydrogen production methods, emphasizing the importance of sustainable and green hydrogen production. It reviews hydrogen production methods, storage, and potential in blended combustion. In the final part of the article, some considerations are introduced on the possible role of hydrogen in the steel sector (both as a supplementary fuel and as a reducing agent in innovative processes), showing how although there is potential for its inclusion as an element for the decarbonization, it is necessary to evaluate the energy balances of the various processes and the methods of hydrogen production very carefully, in order not to risk obtaining a marginal effect.

Models of quantum measurements are presented, including observers subject to the laws of quantum mechanics. Observers perform multiple measurements in an attempt to disprove the collapse hypothesis. It is shown that under reasonable assumptions the effort cannot succeed. Under a unitary evolution the end state is a correlation between the result of the first measurement and the result(s) of the others, consistent with the observer's collapse hypothesis. The observer may conclude that the laws of nature include a non-unitary collapse mechanism, even if one does not actually exist. Discard of information is the crucial factor which distinguishes entanglement from measurement.

Millions of children in developing countries face preventable deaths due to inadequate vaccination and malnutrition, in part due to insufficient monitoring and the absence of official identification. A reliable fingerprint recognition system can be a practical solution to address this issue. However, the scarcity of longitudinal fingerprint datasets for young children leads to unresolved questions regarding the earliest age for fingerprint biometric use, the frequency of enrollment required for reliable recognition, and the methods to accommodate agerelated changes. A few recent studies introduced high-resolution fingerprint scanners and showed promising recognition performance for young children. However, these studies were conducted on a small dataset over a shorter period with limited diversity; further evaluation of their finding is essential. This study assessed the effectiveness of a high-resolution contactless scanner in a controlled, diverse longitudinal dataset of children (0-15 years). Our results indicate that infants can be enrolled at five days old and reliably recognized after two months with a TAR= 100% @ FAR = 0.1%, and children aged 4-15 years can be recognized after one year with a TAR= 98.72% @ FAR = 0.1%.

The first member of the family, visual arrestin-1, was discovered in the late 1970s. Later the other three mammalian subtypes were identified and cloned. The first described function was regulation of GPCR signaling: arrestins bind active phosphorylated GPCRs, blocking their coupling to G proteins. It was later discovered that receptor-bound and free arrestins interact with numerous proteins, regulating GPCR trafficking and various signaling pathways, including those that determine cell fate. Arrestins have no enzymatic activity, they function by organizing multi-protein complexes and localizing their interaction partners to particular cellular compartments. Today we understand the molecular mechanism of arrestin interactions with GPCRs better than the mechanisms underlying other functions. However, even limited knowledge enabled the construction of signaling-biased arrestin mutants and extraction of biologically active monofunctional peptides from these multifunctional proteins. Manipulation of cellular signaling with arrestin-based tools has research and likely therapeutic potential: re-engineered proteins and their parts can produce effects that conventional small molecule drugs cannot.

Optimal planning and design of microgrids is a priority for electrification of off-grid areas. Indeed, according to one of the Sustainable Development Goals (SDG) 7, the UN recommends universal access to electricity for all but, at the lowest cost. To achieve this goal, several optimization methods with different strategies have been proposed in the literature. This paper proposes a microgrid installation and planning model based on a combination of several techniques. Python 3.10, the programming language, has been used in conjunction with machine learning techniques such as unsupervised learning based on K-means clustering and deterministic optimization methods based on mixed linear programming. These methods were complemented by the open-source spatial method for optimal electrification planning: onsset. The results obtained enabled us to simulate the model obtained, with a cluster considered as a case study, based on the elbow and k-means clustering method; then, in a second phase, to size the microgrid with a capacity of 40 kW, by optimizing all the resources available on the site: the example of the various resources in the case of Togo was considered (solar, wind, hydropower). This study therefore highlighted the optimal resources obtained by integrating battery systems by the optimization model formulated on the basis of the various technology costs, such as investment, maintenance and operating costs, based on the technical limits of the various technologies. For the optimum results obtained, solar systems account for 80% of the maximum load considered, compared with 7.5% for wind systems and 12.5% for battery systems. Next, an optimal microgrid connection model was proposed, based on the constraints of a voltage stability limit estimated at 10% of the maximum voltage drop. The substation capacity limit was also taken into account. The results obtained from the case studied enabled us again, to present selective results for load nodes in relation to the substation node. And finally, the spatial technology planning tool made it possible to obtain results on the different strategies for the various technologies required for the electrification planning study of the Togo case. The various results obtained from the different techniques provide the leads needed for a feasibility study for optimal electrification of off-grid areas, using microgrid systems.

Major depressive disorder (MDD) and substance use disorder (SUD) are of immense medical and social concerns. Although significant progress on neuronal involvement in mood and reward circuitries has been achieved, only relatively recently the role of glia in these disorders have attracted attention. Detail understanding of the glial function in these devastating diseases could offer novel interventions. Here, following a brief review of circuitries involved in mood regulation and reward perception, specific contribution of the neurotrophic factors, neuroinflammation and gut microbiota to these diseases are highlighted. In this context, the role of specific glial cells (e.g., microglia, astroglia, oligodendrocytes and synantocytes) on phenotypic manifestation of MDD or SUD are emphasized. In addition, potential use of this knowledge in developing novel therapeutics is touched upon.

Coal bottom ash (CBA) is a byproduct of coal-burning power plants. This material can be used as a fine aggregate replacement in concrete to reduce global natural material depletion. Concrete usage is increasing rapidly; subsequently, the industry’s carbon footprint is increasing. Using CBA in the construction industry will reduce the technical and economic problems associated with power plants by reducing solid waste. This project aimed to determine if adding new sustainable materials, such as CBA, to concrete will reduce natural raw material usage, energy consumption, and greenhouse gas emissions while improving performance. This study included two projects: comparing increased CBA content to the two-control project and determining the optimum content based on the compressive strength. The optimum CBA content is 50%, which reduces fine aggregate usage in a concrete mix by 50% while maintaining equivalent or better concrete strength than a pure Portland concrete mix without CBA. The air content of the concrete mix containing % CBA decreased with increased CBA content and compressive strength, possibly due to the spacing factor of the voids in the mix and CBA’s porous and fineness behavior. The CBA optimum content had a unit weight lower than the controls for both projects, which makes the CBA mix a lightweight concrete. Using this material can significantly reduce natural material usage and environmental harm by reducing CBA waste disposal and improving concrete performance.

Corneal biomechanics is a hot topic in ophthalmology. The biomechanical properties of the cornea (BMPs) have important implications in the management and diagnosis of corneal diseases such as ectasia and keratoconus. In addition, the characterization of BMPs is crucial to model the predictability of a corneal surgery intervention, the outcomes of refractive surgery or follow-up of corneal diseases. The biomechanical behavior of the cornea is governed by viscoelastic properties that allow, among other structural implications, the damping of excess of intraocular pressure and reduce damage to the optic nerve. Currently, the most versatile and complete methods to measure corneal viscoelasticity are based on air-puff corneal applanation. However, those methods lack the ability to directly measure corneal viscosity. The aim of this work is to propose a new methodology based on the analysis of corneal air-puff measurements through the Standard Linear Solid model (SLSM) to provide analytical expressions to separately calculate the elastic and time-dependent (corneal retardation time and viscosity) properties. The results shown the mean values of elasticity (E), viscosity (Ƞ) and corneal retardation time (τ) in a sample of 200 young and healthy subjects. The influence of elasticity and viscosity on viscoelasticity, high-order corneal aberrations and optical transparency is investigated. Finally, the SLSM fed back from experimental E and Ƞ values was employed to compare the creep-relaxation response between normal, an ocular hypertension patient and Ortho-K user.

This study analyzed eye examination data from the 5th Korea National Health and Nutrition Examination Survey to investigate the relationship between cataract prevalence and sunlight exposure among Koreans. Out of 952 individuals from 192 districts surveyed from January to December, statistical analyses using SPSS version 26, including chi-square tests and logistic regression, were conducted. Results: Results showed that the incidence of cataracts was higher in people exposed to sunlight for more than 5 hours. Regarding gender, the incidence of cataracts was higher in female in the 2-5 hours of sunlight exposure group, and in male in the group exposed to sunlight for more than 5 hours. Age significantly increased cataracts after age 45 in both groups. Additionally, the prevalence was higher among college graduates in the 2 to 5 groups, and among elementary school graduates in the more than 5 hours usage group. In urban areas, the cataract prevalence rate was higher in the 2-5-hour usage group, and in rural areas, the cataract prevalence was higher in the more than 5-hour usage group. In conclusion, prolonged sunlight exposure, particularly over 5 hours, correlated with higher cataract prevalence among Koreans, with various demographic factors influencing incidence rates.

A joint analysis of solar wind, geomagnetic field, and earthquake catalog data showed that before the catastrophic M7.8 and M7.5 Kahramanmaras earthquake sequence on February 6, 2023, the closed strong magnetic storm occurred on November 7, 2022, SYM/H=-117 nT. Storm started at 08:04 UT. At this time, the high latitudinal part of Turkey's longitudinal region of future epicenters was located under the polar cusp, where the solar wind plasma would directly access the Earth's environment. The time delay between storm onset and earthquake occurrence was ~91 days. We analyzed all seven strong (M7+) earthquakes from 1967 to 2020 to verify the initial findings. A similar pattern has been revealed for all events. The time delay between magnetic storm onset and earthquake occurrence varies from some days to some months. To continue these investigations, a retrospective analysis of seismic and other geophysical parameters just after preceded geomagnetic storms in the epicenter areas is desirable.

Mesenchymal stem cells due to their multipotent ability are considered one of the best candidates to be used in regenerative medicine. The most used source of those stem cells long the last decades was the bone marrow, despite its limited cell resources and the painful and very invasive surgical treatment. Therefore, the scientific community investigated many alternative sources for the harvesting of these stem cell subpopulations. Adipose tissue attracted the biggest interest thanks to special features, such as great tissue abundance, easy availability, and in the end the large amount of positive mesenchymal stem cells. Once it was verified that these stem cell subpopulations possess the same bone marrow differentiation potential, it became evident that they would be the ideal candidate to be used in regenerative and tissue engineering applications. Even the regenerative use of these cells long become a sensitive point because not all the acquired phenotypes resulted in the best source for plastic procedures. As documented in the literature, the ideal fillers for regenerative is represented by stem cell population. Therefore, it became crucial to investigate any kind of biological mechanism on the differentiative ability of those mesenchymal stem cells, especially their regulative factors. One of the most studied and important regulators are the miRNAs. Indeed, miRNA play a crucial role in the differentiation process of adipose stem cell cultures isolated from patients or obtained by commercial cell lines toward osteocytes, chondrocytes, and adipocytes differentiated populations.

Recent discoveries of potential ice particles and ice-cemented regolith on celestial bodies like the Moon and Mars have ushered in new opportunities for developing technologies to extract water, facilitating future space missions and activities on these celestial surfaces. This study delves into the potential for water extraction from regolith through an experiment designed to test water recuperation from regolith simulant under varying gravitational conditions. The resultant water vapor extracted from the regolith is re-condensed on a substrate surface and collected in liquid form. Three types of substrates, hydrophobic, hydrophilic, and grooved, are explored. The system’s functionality was assessed during a parabolic flight campaign simulating three distinct gravity levels: microgravity, lunar gravity, and Martian gravity. Our findings reveal that the hydrophobic surface demonstrates the highest efficiency due to drop-wise condensation, and lower gravity levels result in increased water condensation on the substrates. This experiment aims to provide insights into in-situ water recovery, which is pivotal for establishing economically-sustainable water supplies for future missions.

The dynamic landscape of AI adoption and its impact on employment in Malaysia demands a multifaceted approach to navigate the challenges and harness the opportunities presented. While the government's commitment to fostering AI adoption through initiatives like the National AI Framework and the Malaysia Digital Economy Blueprint is commendable, it is imperative to address concerns regarding job displacement and ensure inclusive growth. This study identifies the pressing research problem of workforce readiness for the AI-driven future, emphasizing the need to explore strategies for reskilling and upskilling affected workers. By employing critical lenses such as Marxist, feminist, and postcolonial perspectives, scholars highlight the power dynamics and societal implications inherent in AI deployment, guiding the development of policies and interventions that prioritize workers' interests and address social inequalities. Moving forward, a comprehensive approach combining policy interventions, educational reforms, and inclusive strategies is essential to maximize the benefits of AI adoption while mitigating its potential risks. Longitudinal studies, interdisciplinary research, and comparative analyses will further advance our understanding and inform evidence-based policymaking in this evolving field. Ultimately, by prioritizing workforce preparedness, social equity, and sustainable development, Malaysia can position itself as a leader in the AI-driven global economy, fostering a resilient, inclusive, and prosperous society for all.

Using assembly theory, we investigate the assembly pathways of binary strings of length N formed by joining bits present in the assembly pool and the strings that entered the pool as a result of previous joining operations. We show that the string assembly index is bounded from below by the shortest addition chain for N, and we conjecture about the form of the upper bound. We define the degree of causation for the minimum assembly index and show that for certain N it features regularities that can be used to determine a shortest addition chain. We show that a string with the smallest assembly index for N can be assembled by a binary program of length equal to this index if the length of this string is expressible as a product of Fibonacci numbers. We conjecture that there is no binary program that has a length shorter than the length of the string having the largest assembly index for N that could assemble this string. The results confirm that four Planck areas provide a minimum information capacity that corresponds to a minimum thermodynamic (Bekenstein-Hawking) entropy. Knowing that the problem of determining the assembly index is at least NP-complete, we conjecture that this problem is NP-complete, while the problem of creating the string so that it would have a predetermined largest assembly index is NP-hard. The proof of this conjecture would imply P ≠ NP, since every computable problem and every computable solution can be encoded as a finite binary string.

Given the increased provision of international exchange programmes in higher education, this paper examines students’ perceptions of their learning process in one Erasmus+ programme in Food Innovation and Product Design. Using evaluation model of international exchange programme and triple helix model as the analytical framework, students’ testimonials from 2015–2021 were analysed using a critical discourse analysis. EU and non-EU students had similar perceptions of learning outcomes related to knowledge of the food innovation industry, but non-EU students had a stronger sense of awareness of both the international context and multicultural interaction.

Predicting anomalies in manufacturing assembly lines is crucial for reducing time and labor costs and improving processes. For instance, in rocket assembly, premature part failures can lead to significant financial losses and labor inefficiencies. With the abundance of sensor data in the Industry 4.0 era, machine learning (ML) offers potential for early anomaly detection. However, current ML methods for anomaly prediction have limitations, with F1-measure scores of only 50% and 66% for prediction and detection, respectively. This is due to challenges like the rarity of anomalous events, scarcity of high-fidelity simulation data (actual data is expensive), and the complex relationships between anomalies not easily captured by traditional ML approaches. Specifically, these challenges relate to two dimensions of anomaly prediction: predicting when anomalies will occur and understanding the dependencies between them. This paper introduces a new method called Robust and Interpretable 2D Anomaly Prediction (RI2AP) designed to address both dimensions effectively. RI2AP is demonstrated on a rocket assembly simulation, showing up to a 30-point improvement in F1 measure compared to current ML methods. This highlights its potential to enhance automated anomaly prediction in manufacturing. Additionally, RI2AP includes a novel interpretation mechanism inspired by a causal-influence framework, providing domain experts with valuable insights into sensor readings and their impact on predictions. Finally, the RI2AP model is deployed in a real manufacturing setting for assembling rocket parts. Results and insights from this deployment demonstrate the promise of RI2AP for anomaly prediction in manufacturing assembly pipelines.

Academics in healthcare grapple with the challenge of efficiently managing time while addressing diverse roles and responsibilities, leading to heightened levels of anxiety and stress within the academic community. The primary objective of this study is to offer a sustainable and systemic solution to the prevalent time-management challenges in healthcare academia, through the development of a predictive model. Employing systemic analysis software and adopting a systemic management approach, we crafted a model to address academic time-management concerns. The dynamics of time allocation for academicians are governed by three fundamental pillars: teaching, research, and administrative tasks. Significantly prioritizing administrative tasks depletes valuable academic time, making time management within academia excessively costly. This occurs as highly skilled individuals find themselves diverted towards administrative duties at the expense of their academic roles diminishing resilience levels. The proposed Timebooster Academic Systemic Model (TASM) advocates for the cultivation of soft skills in academia, en-compassing prioritization, seeking assistance, and addressing tendencies of perfectionism and procrastination. Additionally, TASM recommends the implementation of full automation, delegation of administrative responsibilities, and the mitigation of both overt and covert time-consuming elements. Furthermore, TASM reports on the pivotal role of the academic resilient manager-leaders, who actively contribute to their own satisfaction and academic growth by enhancing collaboration and teamwork. Time-management challenges emerge as a critical determinant of academic well-being and resilience. Systemic models, exemplified by TASM, offer a valuable framework for investigating prioritization concerns, identifying administrative impediments in academic processes, and managing low-value time-consuming elements. The TASM model, along with the systemic philosophy underpinning its design, presents an avenue for advancing the exploration of time-management phenomena within the context of healthcare academia.

This article conducts a bibliometric analysis focusing on the influence of globalization and technology in the academic context. Previous studies have focused on analyzing the relationship between the number of research citations and international collaboration, but no study has explored it in the scope of consumer behavior and retail. Leveraging the Scopus database, the research analyzes a significant corpus of 2,111 documents from 1971 to 2022. The findings reveal a distinct surge in academic output related to the topic of technology, reflecting a growing interest in understanding the interaction between technological factors and consumer behavior. The study also explores trends in international collaboration in publications as well as its impact on citation counts.

The production of cheese, a beloved culinary delight worldwide, faces challenges in maintaining consistent product quality and operational efficiency. One crucial stage in this process is determining the precise cutting time during curd formation, which significantly impacts the quality of the cheese. Misjudging this timing can lead to the production of inferior products, harming a company's reputation and revenue. Conventional methods often fall short of accurately assessing variations in coagulation conditions due to the inherent potential for human error. To address this issue, we propose an anomaly detection-based approach. In this approach, we treat the class representing curd formation as the anomaly to be identified. Our proposed solution involves utilizing a one-class, fully convolutional data description network, which we compared against several state-of-the-art methods to detect deviations from the standard coagulation patterns. Encouragingly, our results show F1 scores of up to 0.92, indicating the effectiveness of our approach.

Recent technological advancements in produced water for the oil and gas industry have a long history that spreads over centuries and has roots with many mathematicians, physicists, engineers, and inventors. Working to understand the many ideas and questions has helped to bring the produced water technologies to where we are today. Fluid mechanics is an essential factor in the world of engineering because it comes with significant benefits when designing the necessary equipment to overcome the challenging endeavors of daily operations. Many of us believe certain ideas or products were developed within a specific year not fully understanding the idea or concept might be hundreds of years old. For example, when we think of fluid mechanics, we do not think of Archimedes' immersing King Hiero II crown in water. Archimedes did this to determine the displacement of the water as he knew gold was denser than silver. Archimedes was one of the pioneers who was part of the beginning of fluid mechanics. Another interesting fact is the first valve invented was in 1 AD by Heron of Alexandria. This valve can be described as the very first hydraulic valve. The evolution of technology over hundreds of years has made considerable innovations benefiting engineers all over the world. These innovations come in the form of PLCs, RTUs, PIDs, mathematical formulas, processing methods, and SCADA systems.

Nuclear DNA mutations, mitochondrial DNA mutations, combined nuclear and mitochondrial DNA defects, and random occurrences are the main causes of mitochondrial disease. Black pigmentation loss is a major sign of Parkinsonism. Because of the loss of dopaminergic neurons in the substantia nigra, it drops to less than 80%. The degree of motor impairment was correlated with the amount of black pigmentation loss. After RNA extraction, reverse transcription is carried out because reverse transcriptase was used to create cDNA. One microliter of total RNA supplemented with IORT Buffer, dNTPs, random hexamers, Multi-Scribe Reverse Transcriptase, and nuclease-free was used to create cDNA. The following was how the reaction was carried out in a thermal cycler: 10 minutes at 25°C, 120 minutes at 37°C, 5 seconds at 85°C, and lastly 4°C. The data was expressed as a v-value, which shows how much the target gene is enriched in comparison to the reference gene. Earlier research using mice injected with functional HtrA2/Omi protease activity revealed similar outcomes, including induced up-regulation of CHOP, decreased mitochondrial function, and early brain cell aging because of an increase in mtDNA deletions. The cell viability of the genotypes exhibits a dmg concentration-dependent effect in these results, suggesting that high content ratios of drug treatment with 6-OHDA may be the cause of cellular content depletion. After 6-OHDA neurotoxin treatment, CHOP is up-regulated. Prior in vitro research has shown that treatment with a model based on 6-OHDA neurotoxin causes the activation of mitochondrial stress pathways, which in turn promotes the death of neurons. 6-OHDA reversibly inhibited complexes I and IV's activities in rat brain cells, which led to dopaminergic neurodegeneration, a defining feature of PD pathogens. As a result, the number of living cells will directly correlate with the dmg concentration, supporting the results of the current study. Real-time PCR can generally demonstrate that the removal of HtrA 2 results in a significant up-regulation of Hsp60 expression when compared to WT cells. This could be linked to a decreased threshold for mitochondrial stress in HtrA2 KO cells, which would explain why, following ADEP4 and ACP5 treatment, Hsp60 is significantly up-regulated in HtrA2 KO cells compared to WT cells.

Background: Swept-source anterior segment optical coherence tomography (SS-AS- OCT) is a suitable examination for the vitreolenticular interface. Methods: In a prospective study using Anterion (Heidelberg Engineering, Heidelberg, Germany) 102 eyes of 102 patients were examined, in pupil dilation, preoperatively and 6 times over 1-year follow-up. Preoperatively anterior hyaloid membrane (AHM) visibility was determined with Imaging App with high reliability. Postoperatively capsular bag–AHM distance was measured on six points by using Metrics App. Results: The AHM was visible in 18.6% preoperatively and postoperatively as well (Group 1), 49% of the preoperatively adherent AHMs became visible (Group 2A), 32.4% remained attached (Group 2B). Group 1: the average deepest point first day was 782.5 ± 324.1 microns, and it significantly differed from the later follow-up values. Group 2A: the average deepest value was 184.1 ± 220.1 microns, and there was no statistically significant difference between the postoperative visit values. The difference between the groups was statistically significant at every location and at each time points. Conclusions: AS-SS-OCT can be used to check BS both preoperatively(with limitations) and postoperatively.

Telecoupling, interactions between social-ecological systems across large, often global, distances, drives negative impacts from the forest-based carbon market. Yet, these negative impacts have been underreported; and therefore, likely vastly underestimated. We identify how these unintended negative impacts may occur and provide recommendations for the forest-based carbon market to better account for externalities by prioritising positive social impact, expanding comprehensive ecological outcomes and improving transparency of investments. We call for a carbon market that is designed to account for its global interconnectedness.

Smallsats are becoming the predominant electro-optical Earth observation (EO) imaging platforms. While atmospheric correction of smallsat data enhances its utility, an established pathway to do so may constrain accuracy and utility. The alternative, Closed-form Method for Atmospheric Correction (CMAC), developed for smallsat application provides surface reflectance derived solely from scene statistics. In a prior paper, CMAC closely agreed with Land Surface Reflectance Code (LaSRC) software for correction of the four VNIR bands of Landsat-8/9 images for conditions of low to moderate atmospheric effect over quasi-invariant warehouse-industrial targets. Those results were accepted as surrogate surface reflectance to support analysis of CMAC and LaSRC reliability for surface reflectance retrieval in two contrasting environments: shortgrass prairie and barren desert. Reliability was defined and tested through a null hypothesis: the same top-of-atmosphere reflectance under the same atmospheric condition will provide the same estimate of surface reflectance. Evaluated against the prior surrogate surface reflectance, the results found decreasing error with increasing wavelength for both methods. From 58 comparisons across the four bands, LaSRC average absolute error ranged from 0.59% (NIR) to 50.30% (blue). CMAC error was well constrained from 0.01% (NIR) to 0.98% (blue) sustaining the null hypothesis for reliability.

The successful 2020 launch and 2021 landing of the National Aeronautics and Space Administration’s (NASA) Perseverance Mars rover initiated the first phase of the NASA and European Space Agency (ESA) Mars Sample Return (MSR) campaign. The goal of the MSR campaign is to collect scientifically interesting samples from the Martian surface and return them to Earth for further study in terrestrial laboratories. The MSR campaign consists of three major spacecraft components to accomplish this objective: the Perseverance Mars rover, the Sample Retrieval Lander (SRL) and the Earth Return Orbiter (ERO). Onboard the ERO spacecraft is the Capture, Containment and Return System (CCRS). CCRS will capture, process and return to Earth the samples that have been collected after they are launched into Mars orbit by the Mars Ascent Vehicle (MAV), which is delivered to Mars onboard the SRL. To facilitate the processing of the orbiting sample (OS) by CCRS we have designed and developed a vision system to determine the OS capture orientation. The vision system is comprised of two cameras sensitive to the visible portion of the electromagnetic spectrum and two illumination modules constructed from broadband light emitting diodes (LED). Vision system laboratory tests and physics-based optical simulations predict CCRS ground processing will be able to correctly identify the OS post-capture orientation using only a single vision system image that is transmitted to Earth from Mars orbit.

The integration of artificial intelligence (AI) into academic settings in Sabah, Malaysia, is transforming education and research landscapes. While AI technologies promise to enhance teaching, learning, and scholarly activities, they also pose challenges such as ethical concerns and skill gaps among academic staff. This study addresses the multifaceted impacts of AI adoption on academicians in Sabah, focusing on two key research questions: the impact of AI-based intelligent tutoring systems on student engagement, learning outcomes, and educational equity, and the challenges and opportunities in building academicians' capacity to integrate AI technologies effectively. Through a multidisciplinary approach, incorporating insights from education, computer science, social sciences, and ethics, this research aims to evaluate the effectiveness of AI tools in educational settings and identify strategies for skill development and infrastructure support. The study recommends empirical assessments within Sabah's educational institutions, considering contextual factors and fostering collaborative partnerships with local communities. Professional development programs, collaboration with industry partners, and improved access to AI infrastructure are proposed strategies. Longitudinal studies and interdisciplinary research initiatives are suggested for future research, along with qualitative methods to capture diverse perspectives. Ultimately, by embracing a collaborative and multidisciplinary approach, Sabah's academic community can harness the transformative potential of AI to advance education, research, and scholarship while promoting ethical and inclusive practices.

This paper investigates the relationship between public spaces and quality of life (QoL) for older adults, aiming to identify knowledge gaps within the context of population ageing and urbanization. Recognizing the growing importance of sustainable urban development, the research explores how cities can foster active ageing and improve QoL through accessible and inclusive public spaces. A scoping literature review identifies five key QoL domains for older adults: autonomy, meaningful activities, positive social relationships, leisure opportunities, and health. The review highlights areas requiring further investigation, including the interplay between environmental design and social connections, intergenerational perspectives on public space liveliness, the influence of context on QoL and the built environment, and the value of qualitative research in this field. By contributing to the understanding of QoL in relation to public spaces through the lens of Person-Environment fit theory, this study aims to inform urban design, landscape architecture, and policymaking in the creation of age-friendly communities with inclusive public spaces.

Color image binarization plays a pivotal role in image preprocessing work, significantly impacting subsequent tasks, particularly in text recognition. This paper concentrates on Document Image Binarization (DIB), aiming to separate a image into foreground (text) and background (non-text content). Through a thorough analysis of conventional and deep learning-based approaches, we conclude that prevailing DIB methods leverage deep learning technology. Furthermore, we explore the receptive fields pre- and post-network training to underscore the Transformer model's advantages. Subsequently, we introduce a lightweight model based on the U-Net structure, enhanced with the Mobile ViT module to better capture global information features in document images. Given its adeptness at learning both local and global features, our proposed model exhibits superior performance on two standard datasets (DIBCO2012 and DIBCO2017) compared to state-of-the-art methods. Notably, our proposed DIB method presents a straightforward end-to-end model devoid of additional image preprocessing or post-processing. Moreover, its parameter count is less than a quarter of the HIP'23 model, which achives best results on three datasets(DIBCO2012, DIBCO2017 and DIBCO2018). Finally, two sets of ablation experiments were conducted to verify the effectiveness of the proposed binarization model.

This paper explores the application of machine learning (ML) algorithms in predicting trends in the fixed bond market, where traditional analytical methods have proven inadequate. Focusing on various ML techniques such as supervised and unsupervised learning, neural networks, and deep learning, the study evaluates their effectiveness in forecasting market movements. It details a series of experiments in which different ML models are rigorously trained and tested against historical bond market data. The findings reveal that models employing time series analysis and advanced deep learning show marked potential in accurately predicting bond market trends. Additionally, the paper delves into the challenges and limitations inherent in these ML approaches, including data requirements and the risk of model overfitting. Finally, it proposes directions for future research, emphasizing the integration of ML into broader financial market analysis.

In order to tackle the issue of severe rocking phenomenon under seismic conditions in structures equipped with steel spring isolation bearings, this paper investigates a novel type of anti-rocking bearing. Firstly, the structural configuration and working principle of the novel anti-rocking bearing are introduced, and a design method for bearing parameters is proposed. Secondly, a finite element analysis model is established using SAP2000 software to conduct nonlinear dynamic time history analysis under seismic loading. The analysis results show that the structural arrangement of the novel anti-rocking bearing reduces both the vertical displacement difference and the rocking angle of the isolation layer. The bearing exhibits a certain level of anti-rocking effect, but it may cause significant tensile forces in some bearings, necessitating the installation of anti-tensile reinforcement. The effectiveness of the anti-rocking effect improves as the stiffness of the steel tension rod in the bearing increases; however, it also leads to higher maximum tension in individual bearings as well as the total tension in all bearings. For structures equipped with the novel anti-rocking bearing, the acceleration amplifies under most cases, with amplification coefficients ranging from 0.82 to 1.55. The performance of the novel anti-rocking bearing varies significantly for different seismic waves. The stiffness of the steel tension rod should be determined considering the reference pressure of the bearing and the maximum designed tension of the bearing. Through the finite element simulation of the bearing, the mechanical properties of the bearing are basically the same as the theoretical analysis results. For the cylinder and the joint bearing, certain structural measures need to be taken to ensure its strength and stiffness.

Previous research has proven that one of the fundamental requirements for ensuring increased profitability and economic competitiveness of offshore-based projects is co-locating different technologies within the same marine space. This paper presents a number of techno-feasibility analyses for floating offshore technologies for the Maltese Islands, located in the Central Mediterranean Sea. The first part compares the feasibility of offshore-based solar photovoltaic prices with those onshore, taking into consideration Malta’s land prices. The second part considers the use of a novel floating breakwater design that integrates energy storage. The breakwater is used to create a sheltered water area in deep waters for a multi-use marine park. Different revenue streams for the floating break water are considered, including renting the sheltered marine space out to operators of floating solar farms, aquaculture cages and vessel berthing facilities, and the provision of energy storage services. It is found that the combined income from the multiple revenue streams is still insufficient to justify the investment and that financially support from Government is essential to render the floating breakwaters viable.

Diabetic foot is a serious complication that poses significant risks for diabetic people. The resulting reduction in protective sensitivity in the plantar region requires early detection to prevent the imminent ulceration and amputation. The primary method employed for evaluating this sensitivity loss is the 10 g f Semmes-Weinstein monofilament test, commonly used as a first-line procedure. However, the lack of calibration in existing devices often introduces decision errors due to unreliable feedback. In this paper, a new equipment designed to address these limitations and enhance the assessment of the sensitivity loss using the 10 g f monofilament is introduced. The proposed system automates metrological verification and evaluation processes, ensuring accurate and reliable results. Furthermore, it simulates the practitioner’s procedure, serving both as a valuable training tool and a means to provide force-feedback information. An analytical model of the monofilament buckling and deflection is also presented. The obtained results showed that the tested monofilaments had a very high error compared to the 10 g f declared by the manufacturers. It is aimed, by introducing this advanced equipment, to improve the precision and reliability of assessing the sensitivity loss. The integration of automated verification, simulation capabilities, and precise measurements shows great promise for diabetic patients, reducing the likelihood of adverse outcomes such as ulceration and amputation.

Background. Escherichia coli commonly causes catheter-related bloodstream infection (C-RBSI) in specific populations. The differential time to positivity (DTTP) technique is the recommended conservative procedure for diagnosing C-RBSIs. Methods. We conducted a retrospective study of episodes in which E. coli was isolated from catheter lumens obtained using the DTTP technique. We analysed microbiological and clinical data based on the DTTP technique as either catheter colonization, C-RBSI, or non-C-RBSI. Results. We included 89 catheter blood cultures classified as follows: catheter colonization, 33.7%; C-RSBI, 9.0%; and non-C-RBSI, 57,3%. Catheter withdrawal was 15.7% without positive catheter-tip cultures. We found no statistically significant differences in catheter type, antibiotic treatment, or clinical outcome among groups, except for the frequency of catheter lock therapy or in the frequency of successful treatment. Mortality was associated with C-RBSI in only 1 patient. Conclusion. E. coli bacteremia diagnosed by the DTTP technique was non-catheter related in most patients. As the majority of the catheters were retained, E. coli bacteremia could not be microbiologically confirmed or ruled out as catheter related by catheter-tip culture. Future studies are needed to assess the profitability of the DTTP technique for diagnosing E. coli C-RBSIs..

Turbidity stands as a crucial indicator for assessing water quality, and while turbidity sensors exist their high cost prohibit their extensive use. In this paper, we introduce an innovative turbidity sensor, and it is the first low-cost turbidity sensor which is designed specifically for long-term stormwater in-field monitoring. Its low cost ($23.50 USD), enables the implementation of high spatial resolution monitoring schemes. The sensor design is available under open hardware and open-source licences, and the 3D-printed sensor housing is free to modify based on different monitoring purposes and ambient conditions. The sensor was tested both in the laboratory and in the field. The laboratory results show a strong linear relationship (R2 > 0.99) between the sensor readings and the commercial hand-held turbidimeter (Thermo Scientific AQ4500) results of the solution. In the field, the low-cost sensor measurements were statistically significantly correlated (p < 0.01) to a standard high-cost commercial turbidity sensor (GreenSpan TS-1000). Biofouling and drifting issues were also analysed after the sensors were deployed in the field for more than 6 months, showing both biofouling and drift occur during monitoring. Nonetheless, in terms of maintenance requirements, the low-cost sensor exhibited similar needs compared to the Green-Span sensor.

Time, traditionally viewed as a linear, non-dynamic parameter, is re-envisioned in this study as a Hyperdimensional concept. This paper conducts a cross-disciplinary examination, critically analysing the conceptualization of time in classical mechanics, quantum mechanics, and cosmology to propose a ground breaking reconceptualisation that extends beyond conventional frameworks. In classical mechanics, time is perceived as an absolute, continuously progressing backdrop, largely independent of events. Quantum mechanics treats time as a static parameter that does not influence quantum states but provides a framework for their evolution. In cosmology, time is considered a dimension that emerges from the Big Bang and serves as a measure for the universe's expansion, yet it does not interact with the structural dynamics of the cosmos. Challenging the transformative insights of Einstein’s relativity, which merges time with spatial dimensions under extreme conditions, we advocate for a perspective that views time as a Hyperdimensional and universal constant. This perspective posits that time, despite its unique and intrinsic properties, does not dynamically interact with or alter physical phenomena. Instead, it underpins our understanding of phenomena across different scales—from the minutiae of quantum states to the macroscopic dynamics of cosmology—without direct causation or change. A critical examination of time dilation and relativistic assumptions reveals significant discrepancies in traditional interpretations, particularly in how they are applied across different physical contexts. Our findings challenge the uniform applicability of time dilation, suggesting that observed phenomena often attributed to relativistic effects might better be explained through non-relativistic mechanisms such as phase shifts or changes in wavelength rather than temporal dilation. By synthesizing insights from various scientific domains, we advocate for a unified theory that recognizes time as a fundamental, universal dimension that is conceptual and non-interactive. Our goal is to bridge existing gaps between diverse scientific interpretations and promote a more integrated, profound understanding of time's autonomous and intrinsic nature.

Speech emotion recognition (SER) is a technology that can be applied in distance education to analyze speech patterns and evaluate speakers’ emotional states in real-time. It provides valuable insights and can be used to enhance the learning experience by enabling the assessment of instructors’ emotional stability, a factor that significantly impacts information delivery effectiveness. Students demonstrate different engagement levels during learning activities, and assessing this engagement is an important aspect of controlling the learning process and improving e-learning systems. An important aspect that may influence student engagement is the emotional states of their instructors. Accordingly, this research uses deep learning techniques to create an automated system for recognizing instructors’ emotions in their speech when delivering distance learning. This methodology entails integrating Transformer, convolutional neural network, and long short-term memory architectures into an ensemble to enhance SER. Feature extraction from audio data used Mel-frequency cepstral coefficients, chroma, Mel spectrogram, zero crossing rate, spectral contrast, centroid, bandwidth, roll-off, and root-mean square, with subsequent optimization processes adding noise to, conducting time stretching, and shifting the audio data. Notably, several Transformer blocks were incorporated, and a multi-head self-attention mechanism was employed to identify the relationships between the input sequence segments. The pre-processing and data augmentation methodologies significantly enhanced the precision of the results in that the model achieved accuracy rates of 96.3%, 99.86%, 96.5%, and 85.3% on the Ryerson Audio-Visual Database of Emotional Speech and Song, Berlin Database of Emotional Speech, Surrey Audio-Visual Expressed Emotion, and Interactive Emotional Dyadic Motion Capture datasets. Furthermore, it achieved 83% accuracy on another dataset created for this research—the Saudi Higher Education Instructor Emotions dataset. The results demonstrate this model’s considerable accuracy in detecting emotions in speech data across different languages and datasets.

A spatial turn is increasingly being recognised across education, the humanities and social sciences to critique Western Cartesian assumptions treating space as either empty or a diametric opposition bringing dualistic splits between reason/emotion, and mind/body. Bacon’s vision of human subjugation of nature as a tool for human progress is examined as a diametric spatial projection, where humans are above and apart from nature, in a mirror image inverted symmetry of above/below hierarchy and side-by-side assumed separation as diametric space. Building on an interdisciplinary synthesis between an aspect of the structural anthropology of Lévi-Strauss, De Beauvoir’s othering and Bronfenbrenner’s social-ecological systems in psychology, allied with a Heideggerian critique of being as needing a mode of ‘being alongside the world’, a shift in experiential and conceptual space is proposed in this conceptual review article for education. This shift is towards a framework of concentric spatial systems of sustainability. Concentric relational spaces of assumed connection and relative openness and away from diametric spaces of splitting and closure have been developed recently for sustainability concerns regarding inclusion in education. This article goes further to interrogate systems of concentric relational space for belonging with and encountering the natural world for environmental sustainability.

This paper introduces a novel architecture—bidirectional optical neural network (BONN)—for providing backward connections alongside forward connections in artificial neural networks (ANNs). BONN incorporates laser diodes and photodiodes and exploits the properties of Köhler illumination to establish optical channels for backward directions. Thus, it has bidirectional functionality that is crucial for algorithms such as the backpropagation algorithm. BONN has a scaling limit of 96 × 96 for input and output arrays, and a throughput of 8.5 × 1015 MAC/s. While BONN's throughput may rise with additional layers for continuous input, limitations emerge in the backpropagation algorithm as its throughput doesn't scale with layer count. Successful BONN-based implementation of the backpropagation algorithm requires the development of fast spatial light modulator to accommodate frequent data flow changes. A two-mirror-like BONN and its cascaded extension are alternatives for multilayer emulation, and they help save hardware space and increase the parallel throughput for inference. An investigation into the application of the clustering technique to BONN revealed its potential to help overcome scaling limits and to provide full interconnections for backward directions between doubled input and output ports. BONN's bidirectional nature holds promise for enhancing supervised learning in ANNs and increasing hardware compactness.

Sepsis is a life-threatening syndrome triggered by infection and accompanied by high mortality, with antimicrobial resistances (AMRs) further escalating clinical challenges. Rapid and reliable detection of causative pathogens and AMRs are key factors for fast and appropriate treatment, in order to improve outcome in septic patients. However, current sepsis diagnostics based on blood culture is limited by low sensitivity and specificity while current molecular approaches fail to enter clinical routine. Therefore, we developed a Suppression PCR-based selective enrichment sequencing approach (SUPSETS), providing a molecular method combining multiplex suppression PCR with Nanopore sequencing to identify most common sepsis-causative pathogens and AMRs using plasma cell-free DNA. Applying only 1 mL of plasma, we target eight pathogens across three kingdoms and ten AMRs in a proof-of-concept study. SUPSETS was successfully tested on first ten clinical samples and revealed comparable results to clinical metagenomics while clearly outperforming blood culture. Several clinically relevant AMRs could be detected additionally. Furthermore, SUPSETS provided first pathogen and AMR-specific sequencing reads within minutes of starting sequencing, thereby potentially decreasing time to results to 11 - 13 hours and suggesting diagnostic potential in sepsis.

Epithelial barrier damage plays a central role in the development and maintenance of allergic inflammation. The rise in airways epithelial barrier permeability alters the tissue homeostasis and allows the allergen and other external agents penetration. Different factors contribute to barrier impairment, such as eosinophilic infiltrate and allergens proteases action: the eosinophilic cationic proteins and the allergens' proteolytic activity have a central role in contributing to epithelial damage. In the airways, the allergens proteases degrade the epithelial junctional proteins allowing the allergen penetration and the uptake by dendritic cells. The increase in allergen-immune system interactions induce the release of the alarmins and the activation of type 2 inflammatory pathways causing, or worsening, the main symptoms at skin, bowel and respiratory levels. We aim to highlight the molecular mechanisms underlying allergenic proteases-induced epithelial barrier damage and the role of immune response in allergic asthma onset, maintenance and progression. We further will explore clinical and radiological potential biomarkers of airways remodeling in allergic asthma patients.

The Polyurethane (PU) mixture is a high−performance engineering material with different dynamic properties compared to a hot−mixed asphalt mixture (HMA). This paper analyzed whether the Kramers−Kronig (K−K) relation and thermo−rheological simple properties were applicable to the PU mixture. Based on the result discussion, the PU mixture exhibited thermo−rheological simple properties within the test conditions. The time−temperature superposition principle (TTSP) was applicable for the PU mixture to construct the dynamic modulus master curve using the standard logistic Sigmoidal (SLS) model, the generalized logistic sigmoidal (GLS) model, and the Havriliak−Negami (HN) model. The Hilbert integral transformed SLS and GLS models for the phase angle can accurately fit the measured phase angle data with newly fitted shift factors and predict the phase angle within the viscoelastic range. The Core−Core and black space diagrams both displayed single continuous smooth curves, which can be utilized to characterize the viscoelastic property of the PU mixture. The K−K relation is applicable for the PU mixture to obtain the phase angle master curve model, storage modulus, and loss modulus from the complex modulus test results. The phase angle of the PU mixture cannot be derived from the dynamic modulus data and currently needs to be derived from the laboratory measurement.

Special and general relativity (SR/GR) describe nature “subjectively”, that is, from the perspective of just one observer at a time (one class of observers, to be exact). Mathematically, SR/GR are correct. I show: (1) Physically, SR/GR have an issue. There is always just one active perspective—despite the Lorentz covariance of SR, the general covariance of GR, and coordinate-free formulations. This is a fact because SR/GR do not consider a unique 4D vector “flow of proper time” τ for each object. The vector is only disclosed by Euclidean relativity (ER). Because of this constraint, SR/GR lack a holistic view of nature. The issue shows itself in mysteries. Some mysteries (time’s arrow, Hubble tension) are solved by ER. Other mysteries (accelerating expansion of space, entanglement) require concepts (dark energy, non-locality) that are obsolete in ER. Still, SR/GR work well for observers because the Lorentz factor and gravitational time dilation are correct. (2) ER describes nature “objectively”, that is, from the perspectives of all objects at once. An object’s (!) proper space d₁, d₂, d₃ and proper time τ span 4D Euclidean spacetime (ES), where d₁, d₂, d₃ and d₄ = cτ are treated the same. ER provides a holistic view because ES is absolute. An observer’s reality is created by projecting ES orthogonally to his proper space and to his proper time. The SO(4) symmetry of ES is incompatible with waves. This is fine because waves and particles are subjective concepts construed by observers. I conclude: The master reality ES (described by ER) is beyond each observer’s reality (described by SR/GR).

China is experiencing rapid urbanization. The focus on health issues has shifted from the treatment of diseases to passive or active prevention. Diseases caused by the deterioration of the urban environment, such as cardiovascular disease, diabetes, obesity and other chronic diseases and mental illness, have gradually become the main threat to public health. Studies have confirmed that urban green spaces (UGS) can help residents relieve mental stress, improve mood, reduce mental fatigue and restore attention, which has a positive effect on people's physical and mental health. In this study, the relationship between the quantity and quality factors of UGS and the physical and mental health of urban residents in Xihu District of Hangzhou is examined, and on this basis, UGS design strategies are proposed to promote the physical and mental health of residents. This study is of great significance for the future construction of UGS that are beneficial to the health of residents and the promotion of a healthy China and healthy city construction.

Though nowadays germanium do not reach the range of popularity than other metals, i.e. rare earth elements, its utility in target industries makes of it also a strategic metal. Though germanium can be find in a series of raw materials, the principal source for its recovery is from secondary wastes of the zinc industry, and also, the recycle of germanium-bearing waste materials is becoming of interest. In this recovery, Hydrometallurgy is performing a key role to the successful achievement of this goal. The present work reviews the most recent applications (2023 and 2024 years) of hydrometallurgical operations on the recovery of germanium from different solid and liquid sources.

The theories of Evolution and Big Bang have brought a major impact upon the scientific and societal perception upon the origins, abilities and roles of mankind on Earth. It is conclusively evident that Mother Nature and the physical realm is autonomous and all phenomena in the world occur without an imposition against the “free will” of such events and patterns. Nevertheless, this extent of freedom does not imply that life on Earth represents an accident and has no purpose. By careful analysis of ancient religious texts, it can be suggested even otherwise, that it is especially free will that is offered as a gift from outside of the physical dimensions of existence, with the purpose of a continuous edification and improvement of the overall life conditions and of the human perception. It may be that the multi-generational focus on improvement and progress have been misattributed as a long-term evolution of species, that humans came from animal ancestors and that there is a blurred line associating humans with animals. Furthermore, it may be that scientists based their suggestions that no outside Creator would have brought the Earth into existence on physical perspectives, when the extra-dimensional process of Creation implies that all elements of the physical existence undergo a process of Creation from the outside, where time, space and physical matter do not exist, in spite of such elements possibly reflecting unseen elements of the meta-physical world. Finally, there is the following example that deserves attention within the scientific community; just because all living cells - human, animal and plant - contain DNA chromosomes, ribosomes, mitochondria and a plasma membrane, it does not indicate that humans are animals, just as this does not indicate that plants are animals. In Science, there is a golden statement, that correlation does not imply causation. This example is in complete agreement with the verses of the Book of Genesis in the Holy Scriptures regarding the origins of life; namely, that animals could have been created by an Author of all life on Earth so that man would experience companionship. An improved scientific perception of the timeline of life on Earth may be reached via an approach that combines molecular biology with quantum physics, given that the three layers of Science - Biology, Chemistry and Physics - together with their foundational layer of Mathematics, are in fact situated in a relationship of complete harmony.

Objective To investigate nailfold capillary parameters in community-dwelling individuals aged over 60 years who have hypertension and do not exercise regularly. Furthermore, the study examined the correlations between capillary function and other health-related indicators. Design A single- center pilot trial Setting Faculty of Health, Tsukuba University of Technology, Japan Participants hypertensive community-dwelling elderly people Intervention Microcirculation was observed before and 1 min after arm-curl exercise by means microscopy of capillary with non-exercised limb. Additionally, we examined other health-related indicators. Outcome measures: Acute effects of reperfusion on nailfold density, flow, and diameters. Secondary outcomes included the correlations between microvascular parameters and other health-related indicators. We hypothesized that brief exercise could enhance microcirculation reperfusion and correlate with other health-related parameters.　 Results: There were 20 participants with a mean (SD) age of 67.1 (5.8) years. The capillary flow rate changed from 2.3±6.7 to 2.7±0.2 log µm/s (P

Avian influenza viruses (AIVs) are highly contagious respiratory viruses of birds, lead-ing to significant morbidity and mortality globally and causing substantial economic losses to the poultry industry. Since their first isolation in 2013, the Asian-origin H5N1 highly pathogenic avian influenza viruses (HPAI) of clade 2.3.4.4b have undergone unprecedented evolution and re-assortment of internal gene segments and have spread to Asia, Europe, Africa, and America, caus-ing outbreaks in all the poultry categories. Novel epidemiological and pathobiological character-istics, distinct from other clades, are specific of clade 2.3.4.4b viruses. Wild waterfowl, the natu-ral reservoir of AIVs, are frequently found infected with clade 2.3.4.4b viruses, which can also cause high morbidity and mortality in these birds. The sustained clade 2.3.4.4b virus circulation in waterfowl has also led to virus infection in other wild bird species, with implications for the conservation of endangered species. Furthermore, clade 2.3.4.4b viruses have been isolated in var-ious wild and domestic mammals worldwide, and critical mutations related to virus adaptation to mammalian species have been identified, raising concerns about virus spillover to humans. The main clinical signs, and anatomopathological findings associated to clade 2.3.4.4b virus infection in birds and non-human mammals are hereby summarized.

Epithelial–mesenchymal transition (EMT) is defined as a cellular process during which epithelial cells acquire mesenchymal phenotypes and behavior following the downregulation of epithelial features. EMT and its reversed process, the mesenchymal-epithelial transition (MET), and the special form of EMT, the endothelial-mesenchymal transition (EndMT), have been thought as a universal dogma controlling developmental and pathological processes. More than half a century of EMT study has made it a large research field and a mainstream concept. However, discrepancies and disputes over EMT and EMT research have also grown over time. Particularly, neither the epithelial and mesenchymal states/properties nor their regulatory networks nor specific markers have been defined, rendering the EMT, MET and EndMT concepts groundless. Moreover, EMT and MET effects should not be a cause, but rather a consequence of or an accompanying effect during developmental and pathological processes. EMT and MET represented by the change in cell shapes or adhesiveness or symbolized by EMT factors are biased interpretation of the overall change in cellular property and regulatory networks during development and cancer progression. The true meaning of EMT effects in some developmental and pathological processes, such as fibrosis, needs re-evaluation. But the core EMT factors are actually a few components of the regulatory networks of neural stemness, which determines tumorigenicity and pluripotency. The EMT effects in cancer progression and neural crest formation are wrong attribution of the role of neural stemness during cancer progression and the cell-intrinsic property of neural crest cells to the unknown mesenchymal state. It is time to reassess the significance of EMT and its related concepts in scientific research.

The affinity constant, also known as the equilibrium constant, binding constant, equilibrium association constant, or the reciprocal value, the equilibrium dissociation constant (K_d), can be considered as one of the most important characteristics for any antibody-antigen pair. Many methods based on different technologies have been proposed and used to determine this value. However, since a very large number of publications and commercial datasheets do not include this information, significant obstacles in performing such measurements seem to exist. In other cases where such data are reported, the results have often proved to be unreliable. This situation may indicate that most of the technologies available today require a high level of expertise that does not seem to be available in many laboratories. In this paper, we present a simple approach based on standard immunoassay technology that is easy and quick to perform. It relies on the effect that the molar IC₅₀ approaches the K_d value in the case of infinitely small concentrations of the reagent concentrations. A two-dimensional dilution of the reagents leads to an asymptotic convergence to K_d. The approach has some similarity to the well-known checkerboard titration used for the optimization of immunoassays. A well-known antibody against the FLAG peptide, clone M2, was used as a model system and the results were compared with other methods. This approach could be used in any case where a competitive assay is available or can be developed. The determination of an affinity constant should belong to the crucial parameters in any quality control of antibody-related products and assays and should be mandatory in papers using immunochemical protocols.

The present study analyzed the effect of temperature, pH, retention time, pretreatment and mixing ratio on the anerobic digestion process. The parameters during the anaerobic co digestion of cow manure and food waste were then optimized using the Taguchi experimental design method. ANOVA is carried out to find the significant parameters which influence the biogas production. Experimental tests were carried out at laboratory scale reactors kept at different temperatures (28 °C, 35 °C, and 50 °C). The specific methanogenic Performance (SMP) during anerobic digestion at higher temperatures was characterized with the analysis of acetate, propionate, butyrate, hydrogen, glucose, and formate. The improvement of biogas production with different pre-treatment i.e., ultrasonic, autoclave, and microwave techniques also analysed. The results showed that reactor that maintained at 35 °C showed the highest biogas production. While the reactor that maintained at lower temperature (28 °C) produced the lower volume of biogas. As the retention time increases, the amount of biogas produced increases. Methanogenic activities of microorganisms reduced at higher temperature conditions (65 °C). Biogas production increased by 28.1%, 20.23%, and 13.27 % when the of substrates treated with ultrasonic, autoclave, and microwave, respectively, compared to the untreated substrate. The optimized condition for the highest biogas production during anaerobic co digestion of food waste and cow manure is temperature of 35 °C, pH of 7 and mixing ratio (CM: FW=1.5:0.5). ANOVA showed that temperature is the most important input parameter affecting biogas production, followed by mixing ratio.

Time series forecasting has been a challenging area in the field of Artificial Intel-ligence. Various approaches such as linear Neural Networks, Recurrent Linear Neural Networks, Convolutional Neural Networks and recently Transformers have been attempted for the time series forecasting domain. Although, Trans-former-based architectures have been outstanding in the Natural Language Pro-cessing domain, especially in autoregressive language modeling, the initial at-tempts to use transformers in the time series arena have met with mixed success. One of the recent papers demonstrated that modeling the multi-variate time se-ries problem as independent channels on a transformer architecture produced lower mean square and mean absolute errors on benchmarks, however, another recent paper claimed that a simple linear neural network out-performs previous approaches including transformer-based designs. We investigate this paradox in detail comparing the linear Neural Network and Transformer based designs, provide insights to why a certain approach may be better for a particular type of problem. We also improve upon the recently proposed simple linear Neural Network based architecture by using dual pipelines with batch normalization and reversible instance normalization. Our enhanced architecture outperforms all existing architectures for time series forecasting on majority of the popular benchmarks.

Sublingual vaccines offer the benefits of inducing mucosal immunity to protect against respiratory viruses, including Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) and influenza, while also enabling needle-free self-administration. Previously, we developed a sublingual vaccine formulated with the SARS-CoV-2 receptor binding domain antigen and Poly(I:C) adjuvant in nonhuman primates, cynomolgus macaques. This study examined the immune and inflammatory responses elicited by the sublingual influenza vaccine containing hemagglutinin (HA) antigen and Poly(I:C) adjuvant and assessed the safety of this vaccine in nonhuman primates. The Poly(I:C)-adjuvanted sublingual vaccine induced both mucosal and systemic immunities. Specifically, the sublingual vaccineproduced HA-specific secretory IgA antibodies in saliva and nasal washings, and HA-specific IgA and IgG were detected in the blood. This vaccine appeared to be safe, as judged from the results of blood tests and plasma C-reactive protein levels. Notably, sublingual vaccination neither increased the production of inflammation-associated cytokines—IFN-alpha, IFN-gamma, and IL-17—in the blood, nor upregulated the gene expression of proinflammatory cytokines—IL12A, IL12B, IFNA1, IFNB1, CD69, and granzyme B—in white blood cells. Moreover, DNA microarray analyses revealed that sublingual vaccination evoked both enhancing and suppressing expression changes in genes associated with immune-related responses in cynomolgus monkeys. Therefore, the sublingual vaccine with Poly(I:C) adjuvant is safe and creates a balanced state of enhancing and suppressing the immune-related response.

In the field of railroad safety, effective detection of surface cracks is critical, necessitating reliable, high-speed non-destructive testing (NDT) methods. This study introduces a hybrid Eddy Current Testing (ECT) probe, specifically engineered for railroad inspection, to address the common issue of ’lift-off noise’ due to varying distances between the probe and test material. Unlike traditional ECT methods, this probe integrates transmit and differential receiver coils, aiming to enhance detection sensitivity and minimize lift-off impact. The study optimizes ECT probes employing different driver coils, emphasizing three main objectives: a) quantitatively evaluating each probe using signal- to-noise ratio (SNR) and outlining a real-time data processing algorithm based on SNR methodology; b) exploring the frequency range proximal to the electrical resonance of the receiver coil; c) examining sensitivity variations across varying lift-off distances. The experimental outcomes indicate that the newly designed probe with figure 8-shape driver coil significantly improves sensitivity in detecting surface cracks on railroads. It achieves an impressive SNR exceeding 100 for defects with minimal dimensions of 1 mm in width and depth. Simulation results closely align with experimental findings, validating the investigation of optimal operational frequency and lift-off distance for selected probe performance, determined to be 0.3 MHz and 0.5 mm, respectively. The realization of this project would lead to notable advancements in enhancing railroad safety by improving crack detection efficiency.

Research has shown that emotional states may influence the subjective experience of time. The present study involved 111 healthy adult participants and examined the impact of emotional stimuli on time perception, using a time estimation task with four conditions: in one of the conditions, participants estimated the exposure time of a black screen, wherein the duration could vary be-tween 2 to 7 s (condition without emotional interference); in the other conditions, participants es-timated the exposure time (also ranging from 2 to 7 s) of images that would induce pleasant, un-pleasant, or neutral emotions, to which participants were instructed to focus their attention (pleasant, unpleasant, or neutral emotions). The results showed that participants estimated “shorter” time intervals (underestimation) for pleasant and unpleasant images compared to the condition without interference, but no significant differences were found between the neutral condition and the condition without interference. It is suggested that increased attention to an ex-ternal stimuli, regardless of its emotional valence, produces an underestimated perception of time.

The liver diseases are posing serious threat to human health associated with abusive use of allopathy medicines, especially in developing economies like Pakistan. The strengthening of detoxification system using natural products might be a suitable option to minimize the liver problems. In this current research, Zingiber officinale and Azadirachta indica were evaluated for their hepatoprotective role. For the purpose, 20 Sprague Dawley rats were equally divided into four groups i.e., negative control, paracetamol positive control, 2.5% ginger and 2% neem powder, respectively. During 42 days study, the levels of bilirubin and liver enzymes significantly elevated due to liver damage. Although, the values dropped (20-25%) in treatment group. Serum glucose and serum lipid profile increased in positive control group, but reduced (5-10%) in both ginger and neem groups. The serum protein profile declined in liver damage group, however, improved (~5%) in treatment groups. The hematological parameters slightly declined in liver damage group, but increased in ginger and neem groups. Moreover, the white blood cells differential count and renal parameters showed abnormal values in liver damage group, but improved after treatment. This study is promising and highlighted the hepato-protective role of neem and ginger that may open several avenues of research.

In the last decade Electromagnetic Induction (EMI) measurements have been increasingly used for investigating the soil salinization caused by the use of brackish or saline water as irrigation source. EMI measurements proved to be a powerful tool for providing spatial information of the investigated soil because of the strict correlation between the output geophysical parameter, i.e. the electrical conductivity, to soil moisture and salinity. In addition, their non-invasive nature and their capability to collect a high number of data over broad areas and in relatively short time, makes these measurements attractive for monitoring flow and transport dynamics, otherwise undetectable with conventional measurements. In an experimental field, EMI measurements were collected during the growth season of the tomato, irrigated with three different irrigation strategies. The data were collected over three months in a time-lapse mode in order to visualize changes in electrical conductivity to be associated with soil salinity. A rigorous time-lapse inversion procedure has been set for modeling the soil salinization induced by brackish irrigation water.

P versus NP is considered as one of the most fundamental open problems in computer science. This consists in knowing the answer of the following question: Is P equal to NP? It was essentially mentioned in 1955 from a letter written by John Nash to the United States National Security Agency. However, a precise statement of the P versus NP problem was introduced independently by Stephen Cook and Leonid Levin. Since that date, all efforts to find a proof for this problem have failed. Another major complexity class is NP-complete. It is well-known that P is equal to NP under the assumption of the existence of a polynomial time algorithm for some NP-complete. We show that the Monotone Weighted Xor 2-satisfiability problem (MWX2SAT) is NP-complete and P at the same time. Certainly, we make a polynomial time reduction from every directed graph and positive integer k in the K-CLOSURE problem to an instance of MWX2SAT. In this way, we show that MWX2SAT is also an NP-complete problem. Moreover, we create and implement a polynomial time algorithm which decides the instances of MWX2SAT. Consequently, we prove that P = NP.

A proof is given showing the Collatz Conjecture is true for all positive integers. The proof was possible once the perspective of the proof was changed from looking at the pattern of the positive integers to looking at the conjecture rules. The conjecture rule for even numbers organizes all positive integers into unique sets and the rule for odd numbers interconnects the unique sets into dendritic pathways to “1.” Infinite loops, other than the minor 4-2-1 loop after reaching “1,” and pathways to infinity are shown to be mathematically impossible. The proof predicted a general equation that shows all positive integers ultimately reach a final value of “1," and calculates the values and locations of the odd positive integers during the iterations for each tested positive integer.

This paper examines the transformative journey of Artificial Intelligence (AI) agents from copilots to integral coworkers within diverse sectors. Beginning with a foundational overview, we delve into the historical evolution of AI agents, highlighting key technological milestones and the shift from simple automated tools to sophisticated decision-making systems capable of learning and adapting over time. We explore the capabilities of AI agents, including problem-solving, predictive analytics, and automation, and their applications across healthcare, business, and education, showcasing their role in diagnostics, customer service, and personalized learning, among other areas. We also address the integration of AI agents in the workplace, presenting strategies for collaboration between humans and AI, and outline the challenges and ethical considerations that accompany the development and deployment of AI technologies. A comprehensive tutorial provides insight into the development process of AI agents, emphasizing goal definition, data handling, algorithm selection, and ethical guidelines. We also consider the pathway towards Artificial General Intelligence (AGI) and the societal and ethical implications of widespread AI integration, proposing strategies for equitable and ethical AI use.

The paper primarily demonstrates that the three internal triangles formed by connecting any point on a midsegment with the vertices of a generic triangle satisfy the geometric Proof of the Pythagorean theorem in Euclidean geometry. Moreover, this study elucidates the Pythagorean relationships inherent within three-dimensional geometric constructs resulting from the arrangement of three-dimensional spatial triangles. This geometric relationship, akin to a generalized extension of the Pythagorean theorem, unveils a unique spatial region characterized by this harmonious area interrelation among triangles.

India has pledged ambitious initiatives to mitigate its growing economies’ impact on the climate, including a goal of net zero emissions by 2070. The transportation sector is one of the key sources of emissions. Therefore, fostering e-mobility within this sector is a key priority for the Indian government. The lifecycle of LiBs raises numerous concerns regarding its sustainability in production, use of rare materials, and most importantly waste management. Furthermore, this paper will highlight the case for EV battery recycling as a growing sector that also has the potential to foster circularity in the EV sector. Through the introductory section, this paper lays out rationale for battery recycling in a circular EV economy. The subsequent sections discuss the current and emerging battery technologies and their link to recycling methods whilst overviewing domestic and foreign battery recycling companies. Finally, the paper concludes with a gap assessment of the battery recycling ecosystem in India and makes recommendations to further integrate this industry into the EV supply chain. As India steers towards a sustainable future, it is imperative that the country integrates battery recycling to enhance circularity in the EV ecosystem, closing the gap between a growing number of EVs and waste management.

This article begins with exploring fundamental limits in the universe. It examines key principles, such as the uniformity of physical laws and Energy conservation, that lead to maximum speed, locality, and maximum density. These universal limits govern physical phenomena, leading to very interesting results.I demonstrate that quarks and leptons comprise smaller entities named "Quantum Black Holes." These Quantum black holes are relativistically rotating miniature charged black holes consisting of a single core at the highest possible density. Quantum black holes are the only structures small enough in space-time capable of keeping all charges quantized (including gravitational charges.)By the end of the article, I prove that Quantum black holes explain the deficiencies of SM. They facilitate explanations of quantized gravity, the nature of Luminous and dark Matter, establishing the Mass, size, and (quantized) charges quantities of elementary particles, the nature of neutrino oscillations, and more. Elementary particles release their Energy outward, altering the curvature of nearby space-time and providing new insights into the nature of space-time curvature change. With this understanding, we can characterize movements and processes in local space-time using five sets of equations simultaneously: four representing the four charge types and one representing Dark Matter.

The aim of the study was to assess the impact of two lengths of Nordic walking (NW) training interventions combined with time restricted eating (TRE) on improving body composition parameters, lipid profile, and levels of selected adipokines in women with disrupted body mass. Overweight and obese women (n=55, age: 21-85) were recruited. Four groups were selected: 6 weeks (SG6, n=13) and 12 weeks intervention (SG12, n=13); and two control groups: CON6 (n=13); and CON12 (n=13). The training sessions took place 3 times a week (60 minutes each) and were conducted outdoor under the supervision of professional coach. The training intensity was determined individually. The extended NW program combined with TRE induced a significant weight reduction in SG12 by 1.96 kg (p=0.010) and fat tissue by 1.64 kg (p=0.05). The proposed interventions did not affect LBM, TBW [kg], VFA and lipid profile. The LDL/HDL ratio changed with small size effect. Leptin concentration differed between groups (p=0.006), but not over time. For resistin, the differentiating factor was time (p=0.019, with lower results observed after the intervention). The change in leptin concentration was negatively correlated with its baseline concentration. Extended to 12 weeks, this intervention allows for an improvement in body composition. Neither 6 nor 12 weeks of training and fasting affected the lipoprotein profile.

Background: Research articles are essential for describing new ideas, techniques, and procedures and consolidating concepts. It creates an opportunity to expose studies and publicly assimilate published knowledge. Therefore, one of them is the most used and accepted index to verify the author’s scientific impact is the H-index or Hirsch index. It provides a robust single metric that combines quality and quantity. Therefore, it presents disadvantages, (1) researchers with shorter scientific carriers may have fewer articles and citations than those with longer scientific life; (2) it allows scientists to receive citations even if no new papers are published; (3) it is only useful for comparing the better scientists in a field; (4) this indicator can never decrease; (5) it is only weakly sensitive to the number of citations received; (6) the major and minor (or no) contributor in the research gained equal h-index. Then, the H-index ignores the total of citations and the time of a researcher's experience (“scientific age” [sa]). Objective: Thus, the goal of this study was to present a new index system (GFsa index ©) based on the two variables completely forgotten (total of citations and “scientific age”), introducing a new terminology “scientific age”, to evaluate the best-ranked researchers in Dentistry. Methods: The AD Scientific Index was used, and all researchers included in this study were cited in the AD Scientific Index (2024) in the Dentistry field and had the Google Scholar page accessible for a consultation to manually obtain the total of citations and calculate the “scientific age”. The information was retrieved by two authors (G.V.O.F. and J.C.H.F.), who assessed the data twice to avoid errors or mistakes. For inclusion: a minimum H-index value of 30; for exclusion: (i) the author did not have a Google Scholar page; (ii) duplicated author; or (iii) presented any suspicious activities about manipulation of articles. Then, a dataset of all researchers who were reported in Dentistry was prepared (name, H-index, i10 index, and publications). The formula developed and applied was GFsa=(total number of citations)/(“scientific age)². The Pearson correlation statistically evaluated the data obtained; the confidence interval was 95%. Results: A total of 9,093 researchers in Dentistry were recorded, of whom 1,020 were included. Then, we collected all 1,020 researchers' Google Scholar data (publications, citations, and indexes), and each researcher's total citations and “scientific age” were registered and calculated. The mean “scientific age” registered was 34.18 ± 13.34 (standard error of mean = 0.4181). With this information and data collected, GFsa index © was calculated, presenting a minimum value of 0.2186 and a maximum of 154.8 (mean = 10.33 ± 11.82; standard error of mean = 0.3706). Then, the data was organized and sorted following the ranking obtained in the GFsa index ©. The Pearson correlation showed that the H-index had a weakly positive association with the researcher’s “scientific age”; this fact means that the H-index will increase according to the “scientific age” increase. Otherwise, a moderately negative correlation between GFsa and “scientific age” was demonstrated, whereby a higher GFsa © had a lower “Scientific age”. This assessment shows that the variables introduced were fairly used. Moreover, a positive correlation was observed between both indexes (H-index and GFsa). Conclusion: It is possible to conclude that the new variable reported (“Scientific age”) and using the total citations brought a fairer and more feasible evaluation among the researchers. Thus, we are launching the new GFsa index © and the new information named “Scientific age” for the first time in the literature. The future perspective of the GFsa © application will be (1) the evaluation of the 9,093 researchers in Dentistry (total initially registered), including more authors/researchers in the Dentistry field, (2) expanding the exposition of this new index for other areas of the knowledge, and (3) provide free access of all data through the website (http://gfindex.us.to).

This paper is devoted to the study of multi-dimensional integral transform with Fox H-function in the kernel in weighted spaces integrable functions in the domain R+n with positive coordinates. Mapping properties such as the boundedness, the range, the representations of the considered transformation are established.

Differences between the quantum mechanical and relativistic concepts of time observed in GPS satellites are accounted for by applying the equivalence principle to the transitioning electron of an atomic clock. It allows a differential equation of motion to be derived for the electron in the Minkowski space between electron shells. Using Hamilton’s principle we transform the differential equation relativistically into an integral equation of motion, the time integral of a Lagrangian. This newly derived equation accounts for the abstract mathematics of the more familiar non-relativistic model by means of a physical interpretation. Abstract rotations in Hilbert space are replaced by the rotations of real particle field geometries in Minkowski space. Because the properties of energy are universal the same equations are then used to describe the field geometry of galaxies despite vast differences in lifetime. They reveal a symmetry between the electromagnetic fields of atoms and the gravitational fields of galaxies due to similarities in the exchange of energy by radial and transverse fields. Our analysis reveals that the conjugate variables energy and time permit differences between atomic and galactic structure to be compared in a more intuitive way than by means of the differential equations of motion which use the conjugate variables position and momentum.

Space-based gravitational wave detection is extremely sensitive to disturbances. The Keplerian configuration cannot accurately reflect the variations in spacecraft configuration. Planetary gravitational disturbances are one of the main sources. Numerical simulation is an effective method to investigate the impact of perturbation on spacecraft orbits. This study shows that, in the context of the Taiji project, Earth’s gravity is an essential factor in the change in heliocentric formation configuration, contributing to the relative acceleration between spacecrafts in the order of O(10−6)m·s−2. Considering 00:00:00 on October 27, 2032 as the initial orbiting moment, under the influence of Earth’s gravitational perturbation, the maximum relative change in armlengths and variation rates of armlengths for Taiji is 1.6×105km, 32m·s−1 respectively, compared with the unperturbed Keplerian orbit. Additionally, by considering the gravitational perturbations of Venus and Jupiter, the armlength and relative velocity for Taiji are reduced by 16.01% and 17.45%, respectively, compared with when only considering that of Earth. The maximum amplitude of the formation motion indicator changes with the orbit entry time. Results show that the relative velocity increase between the spacecrafts is minimal when the initial orbital moment occurs in July. Moreover, the numerical simulation results are inconsistent when using different ephemerises. The differences between ephemeris DE440 and DE430 are smaller than those between DE440 and DE421.

A novel concept of ion separation Anisotropic Diffusion Mobility Analyser (ADMA) with Individual Ion Counter (IIC) was shown by numerical modelling to be able to separate ions with high resolution and ultra-high sensitivity. An ADMA-IIC device has been developed and tested at sheath flow rates below 40 l/min with a number of chemicals relevant to airport security and military applications. The resolving power of the ADMA was observed to be in the range of 40 to 80. These data were close to the resolution obtained in numerical modelling predictions. It is greater than or comparable with the RP of currently available on-the-market devices for airport security and other applications. It was also confirmed that the ADMA technology enables very fast detection of analytes, at least 100 times faster than ion mobility spectrometers. It was shown that Brownian diffusion can be controlled and even overpowered by generating highly anisotropic diffusion in the ADMA device. The ultimate sensitivity of single-ion detection below the ppq range has been demonstrated.

The social- and self-directed behaviours of two golden lion tamarins (Leontopithecus rosalia) was investigated while having residence in the tropical house of Aalborg Zoo, Denmark. The behaviour of the female had been distinct from the male since 2018. Despite several diagnostic examinations and medicinal treatments, the cause of the aberrant and apparently stereotypical behavioural patterns remained undetermined, which initiated this study. The pair were recorded throughout a predetermined observation period and these recordings were analysed to illuminate the behaviours of the individuals. The results showed that there were differences in the type, frequency, and durations of both social- and self-directed behaviours between the sick female and the healthy male. The female expressed both social- and self-directed behaviours more frequently and for longer durations, while the male were more socially reserved and did not engage in social behaviours as frequently. Furthermore, subsequent necropsy of the female revealed uro-genital disease.

The profile of secondary metabolites occurring in apple cuticular layer is not only characteristic for particular apple cultivar, but also dynamically reflects various external factors in growing environment. In this study, the possibility to authenticate apple samples based on analysis of their cuticular layer extracts was investigated. Ultra-high-performance liquid chromatography coupled to high resolution tandem mass spectrometry (UHPLC-HRMS/MS) was employed for obtaining metabolomic fingerprints. In total, 274 authentic apple samples, four cultivars harvested within the seasons 2020 to 2022 in the Czech Republic and Poland were analysed. The generated complex data processed by univariate and multivariate statistical methods enabled to build classification models for discrimination of apple cultivars as well as their geographical origin. The models showed very good performance in differentiation of Czech and Polish samples for three of four cultivars: ‘Gala’, ‘Golden Delicious’ and ‘Idared’, moreover, the validity of the models was verified over harvest seasons. The diagnostic markers, besides metabolites of triterpene biosynthetic pathway, mainly represented wax esters. ‘Jonagold’, which is known to be susceptible to mutations, was the only cultivar for which the unambiguous classification of geographical origin was not possible.

Amid escalating urbanization, devising rational commercial space layouts is a critical challenge. Leveraging machine learning, this study uses a Back-propagation (BP) neural network to optimize commercial spaces in Weinan City's central urban area. The results indicate an increased number of commercial facilities with a trend of multi-centered agglomeration and outward expansion. Based on these findings, we propose a strategic framework for rational commercial space development emphasizing aggregation centers, development axes, and spatial guidelines. This strategy provides valuable insights for urban planners in small and medium-sized cities in the Yellow River Basin and metropolitan areas, ultimately showcasing the power of machine learning in enhancing urban planning.

The physical roots, interpretation, controversies and precise meaning of the Landauer Principle are surveyed. Landauer's principle is a physical principle pertaining to the lower theoretical limit of energy consumption of computation. It states that an irreversible change in information stored in a computer, such as merging two computational paths, dissipates a minimum amount of heat kBTln2 per a bit of information to its surrounding. The Landauer Principle is discussed in the context of fundamental physical limiting principles, such as the Abbe diffraction limit, the Margolus-Levitin limit and the Bekenstein limit. Synthesis of the Landauer bound with the Abbe, Margolus-Levitin limit and Bekenstein limits yields the minimal time of computation, which scales as τmin~hkBT. Decrease in a temperature of a thermal bath will decrease the energy consumption of a single computation, but, in parallel, it will slow the computation. The Landauer principle bridges between John Archibald Wheeler “it from bit” paradigm and thermodynamics. Experimental verifications of the Landauer Principle are surveyed. Interrelation between thermodynamic and logical irreversibility is addressed. Generalization of the Landauer principle to the quantum and non-equilibrium systems is addressed. Landauer Principle represents the powerful heuristic principle bridging the physics, information theory and computer engineering.

We demonstrate how a rigorous mathematical approach can be used to extract a current CMB temperature of 2.7276 ±0.0723 K from the 580 type Ia supernova data points in the Union2 database. Using redshift formula: z = Sqrt(Rh/R_t) − 1, incorporated into our new CMB redshift prediction redshift formula, we find that the above current CMB temperature value is a remarkably good match for this particular data set. In addition, we can alternatively start out with the measured current CMB temperature and extract the Hubble constant from all 580 supernovae. We then get an estimated Hubble constant of H0 = 66.8711+0.0019 km/s/Mpc when using the CMB temperature from the recent Dhal et al study [1] in combination with redshifts from all 580 supernovae. Furthermore, we get an estimated Hubble constant value of H_0 = 66.8943+0.0287 km/s/Mpc when using the CMB temperature measured by Fixsen [2]. In summary, our simple model essentially perfectly matches all 580 type Ia supernova redshifts while extracting H_0 or T_0 values. The Hubble constant we extract by this method fits very well with the Hubble constant extracted from the CMB by other studies. We believe that our new approach likely solves the Hubble tension problem, at least inside R_h = ct cosmology.

This study provides a comprehensive comparison of the Peter Chew Sum method and Newton's Sum in Quadratic Root Function Computations. Both methods offer significant advancements by alleviating the need for memorization of multiple formulas. However, when confronted with higher-order quadratic root functions such as the calculation of power 33. Newton's Sum method proves cumbersome due to its requirement of all previous answers for final computation, leading to increased steps and error risks. In contrast, the Peter Chew Sum method simplifies the computational process by requiring only a few previous answers, resulting in a more straightforward series of operations. We contextualize our analysis within the historical progression of mathematical techniques, highlighting the transformative leap represented by the Peter Chew Sum method in quadratic root function computations. Peter Chew Sum addressing the limitations of Newton's Sum , especially concerning higher-order functions such as the calculation of power 256. Furthermore, study demonstrates that the innovative approach of the Peter Chew Sum method not only simplifies complex computations but also fosters enhanced conceptual understanding among students. In conclusion, study findings underscore the profound impact of the Peter Chew Sum method on quadratic root function computations.

The application of space robotic manipulators and heightened autonomy for ios represents a paramount pursuit for leading space agencies, given the substantial threat posed by space debris to operational satellites and forthcoming space endeavors. This work presents a guidance algorithm based on drl to solve for the space manipulator path-planning during the motion synchronization phase with the mission target. The goal is the trajectory generation and control of a spacecraft equipped with a 7-dof robotic manipulator, such that its end effector remains stationary with respect to the target point of capture. The ppo drl algorithm is used to optimize the manipulator’s guidance law, and the autonomous agent generates the desired joints rates of the robotic arm, which are then integrated and passed to a model-based feedback linearization controller. The agent is first trained to optimize its guidance policy and then tested extensively to validate the results against a simulated environment representing the motion synchronization scenario of an ios mission.

Mutations in p53 and KRAS are seen in most cases of colon cancer. The impact of these mutations on signaling pathways related to cancer growth has been studied in depth, but relatively less is known on their effects on amino acid transporters in cancer cells. This represents a significant knowledge gap because amino acid nutrition in cancer cells profoundly influences macropinocytosis and ferroptosis, two processes with opposing effects on tumor growth. Here we used isogenic colon cancer cell lines to investigate the effects of p53 loss and KRAS activation on two amino acid transporters relevant to macropinocytosis (SLC38A5) and ferroptosis (SLC7A11). Our studies show that the predominant effect of p53 loss is to induce SLC7A11 with resultant potentiation of antioxidant machinery and protection of cancer cells from ferroptosis whereas KRAS activation induces not only SLC7A11 but also SLC38A5, thus offering protection from ferroptosis as well as improving amino acid nutrition in cancer cells via accelerated macropinocytosis. Niclosamide, an FDA-approved anti-helminthic, blocks the functions of SLC7A11 and SLC38A5, thus inducing ferroptosis and suppressing macropinocytosis with resultant effective reversal of tumor-promoting actions of oncogenic mutations in p53 and KRAS. These findings underscore the potential of this drug in colon cancer treatment.

Multivariate Time Series Classification (MTSC) is one of most important tasks in time series analysis, aiding in activities such as human motion recognition and medical diagnostics. Existing methods for MTSC do not explicitly model temporal differences and generalize the idea of temporal difference into a efficient temporal module. Additionally, existing methods are not yet able to capture cross-variable relationships well during network training. As a result, they are unable to achieve convincing feature representation, leading to suboptimal classification accuracy. In this paper, we propose a novel MTSC model called Temporal Difference and Cross-variate Fusion Network (TDCFN), which integrates a two-stream differential LSTM network and a cross-variate feature extraction network to enhance feature representation. TDCFN achieves superior classification accuracy by capturing dynamic temporal evolution and inter-variable relationships. The experimental results show that TDCFN can achieve competitive performance with state-of-the-art multivariate time series classification approaches.

The fractal dimension of is identified in this paper. More importantly, the undertaken research has shown how affects the Koch snowflake . The study has demonstrated the existence of negative values of (Koch snowflake), which connects to a considerable number of extremely intriguing mathematical and physical research areas. The information-theoretic impact on the Sierpiniski Gasket dimension , which corresponds to , was treated in a more fundamental way. Notably, the credibility of this current study adds to the existing kThe fractal dimension of is identified in this paper. More importantly, the undertaken research has shown how affects the Koch snowflake . The study has demonstrated the existence of negative values of (Koch snowflake), which connects to a considerable number of extremely intriguing mathematical and physical research areas. The information-theoretic impact on the Sierpiniski Gasket dimension , which corresponds to , was treated in a more fundamental way. Notably, the credibility of this current study adds to the existing knowledge for the information- theoretic fractal dimensions. On another applicative note, this paper offers some potential applications of fractal dimension to smart cities. The investigation of the threshold theorems for and in terms of the triad is part of the next study phase. Additionally, investigating the newly obtained 's corresponding arbitrary Sierpinski Gasket for the first time.applicative note, this paper offers some potential applications of fractal dimension to smart cities. The investigation of the threshold theorems for and in terms of the triad is part of the next study phase. Additionally, investigating the newly obtained 's corresponding arbitrary Sierpinski Gasket for the first time.

The acoustic environment in learning spaces significantly influences learning effectiveness and occupant well-being. Recent studies have shown that a series of architectural factors within physical learning environments can impact students' educational experiences. This research delves into the relationship between architectural characteristics and the perceived acoustic environment among 467 primary students in 19 learning spaces across 9 schools in Chile. The survey comprises a student questionnaire, a checklist evaluating space characteristics, and acoustic measurements of indoor noise levels during occupied conditions. Examined topics include Indoor Environmental Quality (IEQ) comfort perception, noise annoyance, hearing ability, and acoustic preference. Architectural characteristics considered encompass flexible and acoustic space design parameters. The results indicated that noise discomfort was a common issue, especially in traditional learning spaces without acoustic treatment. The type of learning space (traditional or flexible settings) has a greater impact on acoustic perception particularly concerning noise discomfort and acoustic preference. However, poorly acoustic spaces lacking absorbing materials or exhibiting lower spatial density (m2 per student) contribute to increased indoor noise levels affecting noise annoyance caused by children's talking inside. The study emphasizes the importance of considering both architectural design and acoustic conditioning for optimizing the acoustic experience in educational spaces.

A difficult open problem that has never been fully resolved in the literature to date is the behaviour of the (TDCDP) third approximation. As a giant step towards modern control theory, this cutting-edge paper will advance control theory and other relevant inter-disciplinary subjects. Because control theory is important in industry and engineering, this study will be especially beneficial to anyone working in these disciplines who wish to understand more about recent advances in control theory settings. In contrast, the wealth of applications of Fokker Planck Kolmogorov (FPK) equations numerous disciplines As a result, the study instantly gains more taste and credibility. At the end of the paper, there are several challenging open problems, some concluding remarks, and recommendations for further investigation.

Droplet-based microfluidics has revolutionized numerous fields such as biomedical research, pharmaceuticals, drug discovery, food engineering, flow chemistry, and cosmetics. This paper presents a comprehensive study focusing on the detection and characterization of droplets with volumes in the nanoliter range. Leveraging the precise control of minute liquid volumes, we introduced a novel spectroscopic On-Chip microsensor equipped with integrated microfluidic channels for droplet generation, characterization, and sensing, simultaneously. The microsensor, designed with Interdigitated-Ring-Shaped Electrodes (IRSE) and seamlessly integrated with microfluidic channels, offers enhanced capacitance and impedance signal amplitudes, reproducibility, and reliability in droplet analysis. We were able to make analyses of droplets length in the range 1.0-6.0 mm, velocity 0.66-2.51 mm/s, droplet volume 1.07nL-113.46nL. Experimental results demonstrated that the microsensor's has a great performance in terms of droplet size, velocity, and length, with a significant signal amplitude of capacitance and impedance, and real-time detection capabilities, thereby highlighting its potential for facilitating microcapsule reactions and enabling on-site real-time detection for chemical and biosensor analyses on-chip.

In this work, a novel approach is presented for the multivariate prediction of hydrological variables, employing a specialized type of recurrent neural network (RNN) known as the long-term memory network (LSTM).The central objective is to develop a flood prediction model using data collected from two hydrological stations situated along the Atrato River in the Choc´o Department, Colombia. The interconnected variables of water level, water flow, and water precipitation are analyzed in this model to enhance flood prediction accuracy. The LSTM model, integrated into an RNN structure, is designed to capture the complex dynamics and cross-correlations inherent in these hydrological variables. Validation involves a comparison with linear and nonlinear Nonlinear AutoRegressive with eXogenous input (NARX) models, considering factors such as estimation error and computational time. Additionally, the study conducts further analysis for water level prediction under two scenarios: utilizing only outflow and inflow measurements or predicting outflow alongside measuring inflow, with the objective of utilizing the proposed approach as a flood early warning system. † This article is a revised and expanded version of a paper entitled Multivariable NARX based Neural Networks Models for Short-term Water Level Forecasting, which was presented at International Conference on Time Series and Forecasting (ITISE-2023), Gran Canaria, Spain, 12th-14th July, 2023.

This study investigates the mean annual water temperature trends at the confluence of the Sava and Danube Rivers, along with air temperature trends at the Belgrade meteorological station, spanning from 1956 to 2020. Results reveal a consistent increase in temperature across all three measuring stations, with the Danube experiencing a rise of 0.34°C/10 years, the Sava at 0.44°C/10 years, and Belgrade's air temperature increasing by 0.39°C/10 years. Employing the RAPS method, sharp rises in water temperature were pinpointed in 1989 for the Sava and 1990 for the Danube, while Belgrade's air temperature surge began in 1998. The highest intensity of air temperature increase within the recent period (1998-2020) was observed at the Belgrade observatory, reaching 0.76°C/10 years. Notably, the Sava exhibited a faster increase in water temperature over the last thirty years compared to the Danube. August marked the peak average water temperature for both rivers, while July recorded the highest average air temperature in Belgrade. Despite differing flow rates, both rivers exhibit similar hydrological regimes, with maximum flows occurring in April and minimum flows in August for the Sava, and October for the Danube. Seasonal temperature increases were most pronounced in summer, notably in August, with the smallest rises occurring during cold periods. Additionally, an inverse proportional relationship between mean annual water temperatures and discharges was observed at both river stations.

As new vaccines reduce P. falciparum (Pf) cases, clinicians can focus on rescuing more children with cerebral malaria (CM). Adjunctive “therapeutically-rational exchange transfusion” (T-REX) refers to using special “Pf-resistant” donor red blood cells (RBCs) that secrete nano-sized RBC extracellular vesicles (EVs). Can some RBC EVs rapidly dislodge Pf-infected RBCs (iRBCs) sequestered in blood vessels and reduce inflammation? Does post-exchange “rebound parasitemia” reflect sequestration-reversal? We reviewed case-reports, EV and liposome studies, expert perspectives, and time-sequence data. In the AQUAMAT study, median coma-recovery time was 20 hours for artesunate. In contrast, a CM patient treated with type-O T-REX quickly began speaking (during the procedure). For other rapid-recovery CM patients, donor RBC variables had not been specified. Despite rapid Pf-killing, drugs need 20 hours to substantially reduce iRBC cytoadhesion while EVs can selectively bind distant inflamed tissues within 15 minutes. RBCs stressed by blood-bank storage and Pf infection secrete EVs. Post-exchange “rebound parasitemia” can occur within 60 minutes and may reflect release of sequestered iRBCs. Sequestration-reversal can be assessed by monitoring Pf parasitemia and total Pf biomass. New data suggest clinicians, working with transfusion- and laboratory-medicine physicians, can, and should, assess T-REX options and publish their findings to help clarify how RBC EVs may serve as therapeutic “decoy ligands.”

Based on our recent thermodynamic formulation of the Friedmann equation, we demon- strate how the age of the universe must be approximately 14.6 billion years. This is about 800 million years older than predicted by the Λ-CDM model and therefore greatly alleviates the early galaxy formation problem.

The therapeutic, attenuative, and morphological effects of proprietary neural stem cell-derived extracellular vesicles (NSC EVs, AB126) produced by Aruna Bio, Inc. were assessed in a range of in vitro and in vivo models of stroke. We emphasize that modulation of neuroinflammation is a key target and suggest further studies to advance our understanding of the mechanisms of action and ultimately how best to dose and monitor the benefits of AB126 in stroke patients.

Electrospun ultrathin fibers based on binary compositions of polylactide (PLA) and poly(ε-caprolactone) (PCL) with different ratios of polymer components from 0/100 to 100/0 wt. % were studied. Using a combination of thermal (DSC) and relaxation (EPR) measurements, the effect of biopolymers content on the characteristics of the crystal structure of PLA and PCL and the diffusive rotational mobility of the stable TEMPO radical in the amorphous regions of PLA/PCL compositions was shown. It was revealed that after PLA and PCL blending, significant changes in the degree of crystallinity of PLA, PCL segmental mobility, sorption capacity of the radical as well as activation energy of rotational diffusion in the amorphous regions of PLA/PCL composition are observed. The characteristic region of biopolymers’ composition from 50/50 to 30/70 % PLA/PCL blends ratio was found, where the inversion transition of PLA from dispersive medium to dispersive phase where an inversion transition is assumed when the continuous medium of the PLA transforms into a discrete phase. The performed studies made it possible for the first time to carry out a comprehensive analysis of the effect of the system component ratio on the structural and dynamic characteristics of the PLA/PCL film material at the molecular level.

The Imbalance Cost Pass-Through (ICPT) is a flexible component of the Incentive Regulation (IBR) that empowers power producers to adjust tariffs in response to variable fuel prices, thereby enhancing the economic resilience of electricity generation. However, the cost of electricity generation is significantly influenced by the volatility of commodity prices, including coal, gas and LNG. In Malaysia, the Energy Commission has conducted biannual reviews of fuel and other generation costs. Any cost savings or increases identified during these reviews will be passed on to customers in the form of rebates or surcharges. Due to that reason, this study proposes ICPT price forecasting for the electricity market in Peninsular Malaysia. The study aims to construct an ICPT-related baseline model for the peninsular generation data by employing three forecasting methods. The forecasting performance is analysed by a Mean Absolute Percentage Error (MAPE). In findings, the ARIMA method is one of the most accurate forecasting methods for fuel prices compared to the Moving Average (MA) and LSSVM methods. The observed price differences between the ARIMA and LSSVM models for ICPT are minimal. The ICPT price for July-December 2022 and January-June 2023 is MYR 0.21/ kWh for ARIMA and MYR 0.18/kWh for LSSVM, which are close to the actual TNB’s ICPT tariff. As for the forecasting, the ICPT price is expected to drop for the next announcement. The findings of this study may contribute to a positive impact on the sustainability of the energy sector in Malaysia.

Dynamic time history analysis is a powerful and effective method to study the seismic response of tunnels, the dynamic time history to analyze the seismic response of the tunnel in the typical subway in this paper. The analysis results show that the overall levelling of the tunnel will not affect the tunnel too much, and the seismic response of the tunnel is mainly related to the relative displacement of the ground around the tunnel. The analysis results show that the internal force of the tunnel and the tunnel inclination have a good linear relationship, and the tunnel inclination can be used to measure the magnitude of the seismic response of the tunnel.