With the widespread use of new equipment such as distributed photovoltaics, distributed energy storage, electric vehicles, and distributed wind power, the control of low-voltage distribution networks (LVDNs) has become increasingly complex. Acquiring the most recent topological structure is essential for conducting accurate analysis and real-time control of LVDNs. The signal-injection-based topology identification algorithm is favored for its speed and efficiency. This study proposes a new signal-injection-based topology identification algorithm aimed at solving the issues of reduced completeness and correctness of identification caused by missing feature signal records (FSRs). By analyzing the correlations between FSRs of different positions, the algorithm employs vertical and horizontal completion methods to effectively address missing data, combined with inclusion detection algorithms, to identify the topology of LVDNs. Based on the study of actual LVDN data, the results indicate that the algorithm not only significantly improves the completeness and correctness of topology identification for LVDNs but can also increase the number of devices in operation by evaluating the status of topological equipment, further enhancing the topology identification performance.

Over the past few years, the importance of video surveillance in securing the national critical infrastructure has significantly increased, whose applications include detecting failures and anomalies. Accompanied by video proliferation is the increasing number of attacks against surveillance systems. Among the attacks, false frame injection (FFI) attacks that replay video frames from a previous recording to mask the live feed has the highest impact. While many attempts have been made to detect FFI frames using features from the video feeds, video analysis is computationally too intensive to be deployed on-site for real-time false frame detection. In this paper, we investigate the feasibility of FFI attacks on compromised surveillance systems at the edge and propose an effective technique to detect the injected false video and audio frames by monitoring the surveillance feed using the embedded Electrical Network Frequency (ENF) signals. An ENF operates at a nominal frequency of 60 Hz/50 Hz based on its geographical location and maintains a stable value across the entire power grid interconnection with minor fluctuations. For surveillance system video/audio recordings connected to the power grid, the ENF signals are embedded. The time-varying nature of the ENF component is used as a forensic application for authenticating the surveillance feed. The paper highlights the ENF signal collection from a power grid creating a reference database and ENF extraction from the recordings using conventional short-time Fourier Transform and spectrum detection for robust ENF signal analysis in the presence of noise and interference caused in different harmonics. The experimental results demonstrate the effectiveness of ENF signal detection and/or abnormalities for FFI attacks.

Alzheimer's Disease (AD) is a neurodegenerative disease that is common in the elderly. This paper introduces the overview of Alzheimer's disease and the application of relevant signal processing methods in its detection. Signal processing is a technique that converts raw data into meaningful information and is widely used in the medical field. This paper lists common signal processing techniques, including Fourier transform, time-frequency analysis and statistical signal processing, and discusses their applications in the detection of Alzheimer's disease. Fourier transform can convert time domain signals into frequency domain representations, providing an effective tool for the study of EEG in Alzheimer's disease. Time-frequency analysis can perform a combined time and frequency analysis of the signal to help detect the signal characteristics of Alzheimer's disease. Statistical signal processing methods can be used to identify the features of Alzheimer's disease by building mathematical models. Finally, the challenges of Alzheimer's disease detection are discussed, including signal noise, diversity, and insufficient data volume. Through in-depth research and development of signal processing methods, it is expected to improve the accuracy and efficiency of early detection of Alzheimer's disease.

Signal preprocessing and feature extraction are two important and necessary steps of data analysis. In signal analysis, typically these two steps are implemented through multiple algorithms. Moreover, the significant parameters in most algorithms are set empirically. We have developed an algorithm that can preserve and highlight characteristic waveforms while attenuating non-feature waveforms. The parameters in the algorithm are set through difference analysis. We have conducted experiments on both clinical and open-source ECG data, obtaining effective test results.

In order to solve the problems of waveform distortion and signal delay by many physical and electrical systems with linear low-pass transfer characteristics with multiple complex poles, a general digital-signal-processing (DSP)-based method of real-time recovery of the original source waveform from the distorted output waveform is proposed. From the convolution kernel representation of a multiple-pole low-pass transfer function with an arbitrary denominator polynomial with real valued coefficients, it is shown that the source waveform can be accurately recovered in real time using a particular moving average algorithm with real-valued DSP computations only, even though some or all of the poles are complex. The proposed digital signal recovery method is DC-accurate and unaffected by initial conditions, transient signals, and resonant amplitude enhancement. This method can be applied to most sensors and amplifiers operating close to their frequency response limits or around their resonance frequencies to accurately deconvolute the multiple-pole characteristics and to improve the overall performances of data acquisition systems and digital feedback control systems.

This study, based on the AISAS model, explores the impact of the interaction effect between visual and auditory signals on consumer purchase behavior. Using experimental methods, 120 participants were randomly assigned to four different visual and auditory signal combinations, and their purchase intentions and actual purchase behavior were measured. The results show that the interaction effect between visual and auditory signals has a significant impact on both purchase intentions and actual purchase behavior, and there is a significant positive relationship. Specifically, when visual and auditory signals are mutually consistent, consumers have the highest purchase intentions and actual purchase behavior; when both visual and auditory signals are absent, consumers have the lowest purchase intentions and actual purchase behavior; when either the visual or auditory signal is missing, consumers' purchase intentions and actual purchase behavior are in between the two extremes. This study provides a new perspective for understanding consumers' decision-making processes in multi-sensory environments and offers valuable insights for the development of marketing strategies.

Epilepsy is a neurological disorder that affects approximately 1% of the world's population. To diagnose and estimate the occurrence of epilepsy, the analysis of recorded brain activity is performed by a neurologist, which is not only time-consuming and tedious but also occasionally accompanied by human error. Therefore, in recent decades, researchers have aimed to unravel an approach for designing and building an automated method for diagnosing and estimating the occurrence of epilepsy. Accordingly, the present study proposed two new-fangled ways based on brain signals and a convolutional neural network (CNN). Moreover, this research implements a CNN with a sequential three-layer structure. Numerous experiments were performed, and the accuracy of estimating epilepsy using the developed methods was achieved at 95% without feedback and 97% with feedback. The proposed methods were proven to be more accurate than the previous techniques and can be employed as a physician's assistant once entering the field of operation.

In the context of partial autonomy, where autonomous vehicles and humans share control of the vehicle, bringing out-of-the-loop drivers back into the loop is a significant challenge. While warning signal design guidelines are commonly used to provide alerts, few studies have examined each signal in depth with an emphasis on the autonomous environment. This study aims to fill this gap by investigating visual, auditory, and tactile stimuli and modifying their sub-attributes to explore variations related to age, gender, and other individual backgrounds. A driving simulator was utilized to create a realistic driving environment and measure participants' reaction times in takeover request situations. Analysis of the data revealed correlations between age and reaction times for auditory and tactile signals, with interaction effects observed between age and sub-attribute intensity. Additionally, participants exhibited varying reaction time patterns in response to different sub-attribute intensities. By evaluating individual differences in perception based on modality characteristics, often overlooked in prior research, this study serves as a foundational contribution to future research in the field.

Signal approximation, is the basic idea of signal processing and mathematical analysis where complex signals can be represented with simpler ones. This paper explores unifying two mathematical fundamentals, Dirichlet-type problems, and hyperbolic series identities, into signal approximation. In this paper, we address a well-known classic topic in mathematical analysis - the Dirichlet problem - to improve (the approximation of) signal using Fourier series. We also discuss using hyperbolic series representations to increase signal modeling flexibility. In this way, we hope to create new links that span some distance along this dimension and result in a somewhat theoretical view of signal behavior - present with the mathematical rigor needed for speculation but absent from an understanding capable of appropriately handling real-world complexity. This paper provides a theoretical investigation of the mechanics at play and reveals by analogy how these mathematical tools can potentially advance signal processing techniques and understanding. This paper illustrates Fourier series and fuzzy logic methods by two case studies on signal processing, satellite communication and financial risk measurement. The first case study performs signal approximation using the Fourier series and hyperbolic function identities to provide insight into how signals behave and are modeled. The second case study deals with applying fuzzy logic for risk evaluation of investment portfolios, emphasizing the utility in evasion systems solving uncertainty and imprecision problems related to financial decisions.

A low-cost machine learning (ML) algorithm is proposed and discussed for spatial tracking of unknown, correlated signals in localized, ad-hoc wireless sensor networks. Each sensor is modeled as one neuron and a selected subset of these neurons are called to identify the spatial signal. The algorithm is implemented in two phases of spatial modeling and spatial tracking. The spatial signal is modeled using its M iso-contour lines at levels {ℓj}j=1M and those sensors that their sensor observations are in Δ margin of any of these levels report their sensor observations to the fusion center (FC) for spatial signal reconstruction. In spatial modeling phase, the number of these contour lines, their levels and a proper Δ are identified. In this phase, the algorithm may either use adaptive-weight stochastic gradient or scaled stochastic gradient method to select a proper Δ. Additive white Gaussian noise (AWGN) with zero mean is assumed along with the sensor observations. To reduce the observation noise’s effect, each sensor applies moving average filter on its observation to drastically reduce the effect of noise. The modeling performance, the cost and the convergence of the algorithm are discussed based on extensive computer simulations and reasoning. The algorithm is proposed for environmental monitoring. In this paper, the percentage of the communication attempts of wireless sensors is assumed as cost. Performance evaluation results show that the proposed spatial tracking approach is low cost and can model the spatial signal over time with the same performance as that of spatial modeling.

We scrutinize the reliability of multilooked interferograms for deformation analysis. Designing a simple approach in the evaluation of the accuracy of the estimated deformation signals, we reveal a prominent bias in the deformation velocity maps. The bias is the result of propagation of small phase error of multilooked interferograms through the time series and can sum up to 6.5 mm/yr in case of using the error prone short temporal baseline interferograms. We further discuss the role of the phase estimation algorithms in reduction of the bias and put recommend a unified intermediate InSAR product for achieving high-precision deformation monitoring.

Underwater communication for Underwater Wireless Sensor Networks (UWSNs) faces challenges due to the unique underwater environment. This review explores these challenges (attenuation, multipath propagation, limited bandwidth) across acoustic, optical, and radio frequency (RF) communication channels. It highlights how innovative antenna designs are crucial to mitigate these limitations and enable efficient data transmission. The review analyzes monopole, dipole, and helical antennas, discussing their trade-offs in radiation pattern, efficiency, and mitigating multipath effects. Advancements in materials, metamaterials, and reconfigurable antennas offer promising solutions for improved signal propagation, reduced attenuation, and better environmental adaptability. Research gaps include material exploration for low-conductivity antennas and optimizing antenna designs. Rigorous performance evaluation remains essential. Overall, advancements in underwater antenna technology are key to unlocking the full potential of UWSNs and enabling breakthroughs in marine applications.

Photoplethysmography (PPG) is widely utilized in wearable healthcare devices due to its convenient measurement capabilities. However, the unrestricted behavior of users often introduces artifacts into the PPG signal. As a result, signal processing and quality assessment play a crucial role in ensuring that the information contained in the signal can be effectively acquired and analyzed. Traditionally, researchers have discussed signal quality and processing algorithms separately, with individual algorithms developed to address specific artifacts. In this paper, we propose a quality-aware signal processing mechanism that evaluates incoming PPG signals using signal quality index (SQI) and selects the appropriate processing method based on the SQI. Unlike conventional processing approaches, our proposed mechanism recommends processing algorithms based on the quality of each signal, offering an alternative option for designing signal processing flows. Furthermore, our mechanism achieves a favorable trade-off between accuracy and energy consumption, which are the key considerations in long-term heart rate monitoring.

{Here, we propose a new tool to estimate the complexity of a time series: the entropy of difference (ED). The method is based solely on the sign of the difference between neighbouring values in a time series. This makes it possible to describe the signal as efficiently as prior proposed parameters such as permutation entropy (PE) or modified permutation entropy (mPE), but (1) reduces the size of the sample that is necessary to estimate the parameter value, and (2) enables the use of the Kullback-Leibler divergence to estimate the "distance" between the time series data and random signals.

This paper addresses the problem of low accuracy of conventional channel estimation and signal detection in complex fields like mines; and the problem of replacing the deep receiver at the receiver side with a deep neural network requires a large amount of data for training and slow training time. Combining the receiver side with traditional communication knowledge, a channel estimation and signal detection method based on the joint ReEsNet and SDRNet under the mine is proposed. The detailed step is to use ReEsNet network for interpolation of conventional channel estimation. Then, on the basis of ReEsNet, the output data is channel equalized and pilots removed, and the previously processed data is input to SDRNet to perform signal recovery. In the complex mine environment, the MSE values are 2e-2 for LS, 6e-3 for MMSE, and 8.44e-5 for ReEsNet at the 1500th sample data for interpolation compared to the conventional channel estimation. the MSE of ReEsNet is the smallest and is closer to the real channel estimation. Compared with the proposed joint channel estimation and signal detection methods, fewer trainable parameters reduce 97% of the parameters compared to CCRNet and 84% of the parameters compared to CNNNet; their detection results, however, are not very different.

Heart rate variability (HRV) is commonly intended as the variation in the heart rate (HR) and it is evaluated in the time and frequency domains with various well known methods. In the present paper, we first consider an abstract model in which the HR is the instantaneous frequency of an otherwise periodic signal such as the electrocardiogram (ECG). Thus the ECG is assumed as a frequency modulated signal, or carrier signal, where HRV or HRVt is a supposed time-domain signal which is frequency modulating the carrier ECG signal around its average frequency. Hence we describe an algorithm able to frequency demodulate the ECG signal to extract a continuous signal HRVt with possibly enough time resolution to analyse fast time-domain variations in the instantaneous HR. After exhaustive testing of the method on simulated frequency modulated sinusoidal signals, we have applied the procedure on actual ECG tracings. The purpose of the work is to eventually use the heart as a kind of biological sensor of the fast activity of the autonomic nervous system (ANS) to study the ANS ultra-short-term event-evoked responses. A few preliminary, not clinical, real examples are also given.

Integrated Kerr micro-combs, a powerful source of many wavelengths for photonic RF and microwave signal processing, are particularly useful for transversal filter systems. They have many advantages including a compact footprint, high versatility, large numbers of wavelengths, and wide bandwidths. We review recent progress on photonic RF and microwave high bandwidth temporal signal processing based on Kerr micro-combs with spacings from 49-200GHz. We cover integral and fractional Hilbert transforms, differentiators as well as integrators. The potential of optical micro-combs for RF photonic applications in functionality and ability to realize integrated solutions is also discussed.

In this study, we propose an augmentation method for machine learning based on relabeling data in caregiving and nursing staff indoor localization with Bluetooth Low Energy (BLE) technology. Indoor localization is used to monitor staff to patient assistance in caregiving and to gain insights into workload management. However, improving accuracy is challenging when there is a limited amount of sensor data available for training. In this paper, we propose a data augmentation method to reuse the Received Signal Strength (RSS) from different sensors by relabeling to the sensors with less samples resolving data imbalance. Standard deviation and Kullback-Leibler divergence between minority and majority class are used to measure signal pattern to find matching sensors to relabel. By matching sensors between classes, two variation of relabeling are implemented specifically full and partial matching. The performance is evaluated using real world dataset we collected for five days in a nursing care facility installed with 25 BLE beacons. Random Forest model is utilized for location recognition, and performance is compared using the weighted F1-score to account for class imbalance. By increasing the sensor data with our proposed relabeling method for data augmentation, we achieved higher minority class F1-score as compared to augmentation with Random Sampling, Synthetic Minority Oversampling Technique (SMOTE) and Adaptive Synthetic Sampling (ADASYN). Our proposed method utilizes collected sensor data by leveraging majority class samples. Full matching demonstrated a 6 to 8% improvement from the original baseline overall weighted F1-score.

Data can be illustrated in shapes, and the shapes could provide insight for data modeling and information extraction. Topological data analysis provides an alternative insight in biomedical data analysis and knowledge discovery with the algebra topology tools. In present work, we study the application of topological data analysis for personalized electrocardiographic signal classification toward arrhythmia analysis. Using phase space reconstruction technique, the signal samples are converted into point clouds for topological analysis facility. With topological techniques the persistence landscapes from the point clouds are extracted as features to perform the arrhythmia classification task. We find that the proposed method is robust to the training set size, with only a training set size of 20% percents, the normal heartbeat class are 100% recognized, ventricular beats for 97.13%, supra-ventricular beats for 94.27% and fusion beats for 94.27% within the corresponding experiments. The property of keeping high performance when using smaller training sample proves that the proposed method is especially applicable to personalized analysis. With the present study, we show that the topological data analysis technique could be a useful tool in biomedical signal analysis, and provide powerful ability in personalized analysis.

The hydroacoustic in-water stations of the International Monitoring System (IMS) network consist of three hydrophones placed at Sound Fixing and Ranging (SOFAR) channel depths and about 2 km away from each other. Whale signals recorded in the vicinity of a hydrophone triplet offer the opportunity to verify simple models of propagation in the immediate neighborhood of the triplet, by comparing arrival times and amplitudes between the three hydrophones. Two examples of whales passing by hydrophone triplets are presented and conclusions drawn about waveform coherency and amplitude of the signals recorded at the three hydrophones in the 0-50 Hz frequency band. On the examples recorded at the HA11 IMS hydroacoustic station, the amplitude decay law of one over the distance is verified, and analysis of hundreds of calls located almost above the hydrophone triplet lead to the possibility that the H11S3 hydrophone may be located further from H11S1 and H11S2, and the H11S1 hydrophone’s depth may be deeper than expected from the published locations.

Microwave photonic (MWP) signal processors, which process microwave signals based on photonic technologies, bring advantages intrinsic to photonics such as low loss, large processing bandwidth, and strong immunity to electromagnetic interference. Optical microcombs can offer a large number of wavelength channels and compact device footprints, which make them powerful multi-wavelength sources for MWP signal processors to realize a variety of processing functions. In this paper, we experimentally demonstrate the capability of microcomb-based MWP signal processors to handle diverse input signal waveforms. In addition, we quantify the processing accuracy for different input signal waveforms, including Gaussian, triangle, parabolic, super Gaussian, and nearly square waveforms. Finally, we analyze the factors contributing to the difference in the processing accuracy among the different input waveforms, and our theoretical analysis well elucidates the experimental results. These results provide a guidance for microcomb-based MWP signal processors when processing microwave signals of various waveforms.

The principal aim of a spectral observer is twofold: the reconstruction of a signal of time via state estimation and the decomposition of such a signal into the frequencies that make it up. A spectral observer can be catalogued as an online algorithm for time-frequency analysis because is a method that can compute on the fly the Fourier transform (FT) of a signal, without having the entire signal available from the start. In this regard, this paper presents a novel spectral observer with an adjustable constant gain for reconstructing a given signal by means of the recursive identification of the coefficients of a Fourier series. The reconstruction or estimation of a signal in the context of this work means to find the coefficients of a linear combination of sines a cosines that fits a signal such that it can be reproduced. The design procedure of the spectral observer is presented along with the following applications: (1) the reconstruction of a simple periodical signal, (2) the approximation of both a square and a triangular signal, (3) the edge detection in signals by using the Fourier coefficients, (4) the fitting of the historical Bitcoin market data from 2014-12-01 to 2018-01-08 and (5) the estimation of a input force acting upon a Duffing oscillator. To round out this paper, we present a detailed discussion about the results of the applications as well as a comparative analysis of the proposed spectral observer vis-à-vis the Short Time Fourier Transform (STFT), which is a well-known method for time-frequency analysis.

This paper presents a method for filtering and extracting noise from ECG signals using a Butterworth filter. The aim is to enhance signal qual- ity, enabling more accurate analysis in biomedical contexts, particularly in arrhythmia detection and other cardiac assessments.

In this paper, we investigate the following chemotaxis-haptotaxis model $$\left\{ \begin{array}{ll} u_{t}=\nabla\cdot (D(u) \nabla u)- \nabla\cdot (H(u)\nabla v)- \nabla\cdot (I(u)\nabla w)+ u(a-\mu u^{k-1}-\lambda w),\\ v_{t}=\triangle v-v+u^{\gamma},\\ w_{t}=-v w \end{array}\right.\eqno(*) $$ under homogenous Neumann boundary condition and for a bounded domain $ \Omega \subset \mathbb{R}^{n} (n\geq2)$, with $\lambda, \mu, \gamma >0$, $k>1$, $a \in \mathbb{R}$, and $D(u)\geq K_{D} (u+1)^{m-1}$, $0\leq H(u)\leq \chi u(u+1)^{-\alpha}$, $0\leq I(u)\leq \xi u(u+1)^{-\beta}$ for $K_{D}, \chi, \xi>0, m, \alpha, \beta\in \mathbb{R}$. It has been demonstrated that (i) For $0\gamma-k+1$ and $\beta>1-k$, problem ($*$) admits a classical solution $(u, v, w)$ which is globally bounded. (ii) For $\frac{2}{n}\gamma-k+\frac{1}{e}+1$ and $\beta>\max\{\frac{(n\gamma-2)(n\gamma+2k-2)}{2n}-k+1, \frac{(n\gamma-2)(\gamma+\frac{1}{e})}{n}-k+1\}$ or $\alpha>\gamma-k+1$ and $\beta>\max\{\frac{(n\gamma-2)(n\gamma+2k-2)}{2n}-k+1, \frac{(n\gamma-2)(\alpha+k-1)}{n}-k+1\}$, problem ($*$) admits a classical solution $(u, v, w)$ which is globally bounded.

Kisspeptin, a key neuropeptide derived from the KISS1 gene, is renowned for its critical role in regulating the hypothalamic-pituitary-gonadal axis and reproductive hormone secretion. Beyond its primary function in reproductive biology, emerging research has illuminated its influence in various cancers, mediating significant effects through its interaction with the G-protein coupled receptor, Kisspeptin receptor. This interaction has been implicated in modulating cellular pro-cesses such as proliferation and metastasis, making it a potential target for therapeutic interven-tion. Our study initially screened ten kisspeptin-10 analogs through cytotoxic effects of kisspep-tin-10 (KP10) and its analogs in several cancer types, including cervical, prostate, breast, and gastric cancers, with a particular focus on cervical cancer where the most profound effects were observed. Further exploration using kinase array assays revealed that these analogs specifically alter key kinases involved in cancer progression. Migration assays demonstrated a substantial decrease in cell motility, and Bioluminiscence Resonance Energy Transfer assays confirmed these analogs strong interactions with the kisspeptin receptor. Overall, our results indicate that these KP10 analogs not only hinder cervical cancer cell proliferation but also curtail migration through targeted modulation of kinase signaling, suggesting their potential as therapeutic ayfgents in managing cervical cancer progression. This comprehensive approach underscores the therapeutic promise of exploiting kisspeptin signaling in cancer treatment strategies.

We report a dual-polarization radio frequency (RF) channelizer based on microcombs. With the tailored mismatch between the FSRs of the active and passive MRRs, wideband RF spectra can be channelized into multiple segments featuring digital-compatible bandwidths via the Vernier effect. Due to the use of dual-polarization states, the number of channelized spectral segments, and thus the RF instantaneous bandwidth (with a certain spectral resolution), can be doubled. In our experiments, we used 20 microcomb lines with ~ 49 GHz FSR to achieve 20 channels for each polarization, with high RF spectra slicing resolutions at 144 MHz (TE) and 163 MHz (TM), respectively; achieving an instantaneous RF operation bandwidth of 3.1 GHz (TE) and 2.2 GHz (TM). Our approach paves the path towards monolithically integrated photonic RF receivers (the key components—active and passive MRRs are all fabricated on the same platform) with reduced complexity, size, and unprecedented performance, which is important for wide RF applications with digital-compatible signal detection.

In recent decades, microwave photonic channelization has developed rapidly. Characterized by low loss, high versatility, large instantaneous bandwidth, and immunity to electromagnetic interference, microwave photonic channelization techniques coincides with the requirements of modern radar and electronic warfare for receivers. The advanced microresonator-based optical frequency combs are promising platforms for the research of the photonic channelized receivers, which take full advantage of multicarrier and large bandwidth, and accelerate the integration process of microwave photonic channelized receivers. In this paper, we review the research progress and trends in microwave photonic channelization, focusing on schemes that utilize integrated microcombs. Finally, we discuss the potentials of microcomb-based RF channelization, as well as the challenges and limitations, and provide routes and perspectives for future developments in the context of on-chip silicon-based photonics.

Microwave transversal filters, which are implemented based on the transversal filter structure in digital signal processing, offer a high reconfigurability for achieving a variety of signal processing functions without changing hardware. When implemented using microwave photonic (MWP) technologies, also known as MWP transversal filters, they provide competitive advantages over their electrical counterparts, such as low loss, large operation bandwidth, and strong immunity to electromagnetic interference. Recent advances in high-performance optical microcombs provide compact and powerful multi-wavelength sources for MWP transversal filters that require a larger number of wavelength channels to achieve high performance, allowing for the demonstration of a diverse range of filter functions with improved performance and new features. Here, we present a comprehensive performance analysis for microcomb-based MWP spectral filters based on the transversal filter approach. First, we investigate the theoretical limitations in the filter spectral response induced by finite tap numbers. Next, we analyze the distortions in the filter spectral response resulting from experimental error sources. Finally, we assess the influence of input signal’s bandwidth on the filtering errors. These results provide a valuable guide for the design and optimization of microcomb-based MWP transversal filters for a variety of applications.

Background: As pediatric BOLD SV is relatively novel, there is a need to provide a foundational framework that gives researchers an entry point into engaging with the topic. This begins with clarifying the definition of BOLD variability by identifying and categorizing the various metrics utilized to measure BOLD SV; Methods: A systematic review of the literature was conducted. Inclusion criteria were restricted to studies utilizing any metric of BOLD signal variability (BOLD SV) and with individuals younger than 18 in the study population. The definition of BOLD SV was any measure of intra-individual variability in the BOLD signal. Five databases were searched: Psychinfo, Healthstar, Medline, Embase, and Scopus; Results: Seventeen observational studies, including male (n =1796) and female (n =1324) pediatric participants were included. Eight studies quantified variability as the amount of deviation from average BOLD signal, 7 used complexity-based metrics, 3 used correlation measures of variability, and 1 used structure of the hemodynamic response function. Ten methods of quantifying signal variability were identified. Associations and trends in BOLD SV were commonly found with age, factors specific to mental and/or neurological disorders like attention deficit disorder, epilepsy, psychotic symptoms, and performance on psychological and behavioral tasks. Conclusions: BOLD SV is a potential biomarker of neurodevelopmental and neurological conditions and symptom severity in mental disorders for defined pediatric populations. Studies that establish clinical trends and identify the mechanisms underlying BOLD SV with a low risk of bias are needed before clinical applications can be utilized by physicians

Microwave photonic (MWP) transversal signal processors offer a compelling solution for realizing versatile high-speed information processing by combining the advantages of reconfigurable electrical digital signal processing and high-bandwidth photonic processing. With the capability of generating a number of discrete wavelengths from micro-scale resonators, optical microcombs are powerful multi-wavelength sources for implementing MWP transversal signal processors with significantly reduced size, power consumption, and complexity. By using microcomb-based MWP transversal signal processors, a diverse range of signal processing functions have been demonstrated recently. In this paper, we provide a detailed analysis for the processing inaccuracy that are induced by the imperfect response of experimental components. First, we investigate the errors arising from different sources including imperfections in the microcombs, the chirp of electro-optic modulators, chromatic dispersion of the dispersive module, shaping errors of the optical spectral shapers, and noise of the photodetector. Next, we provide a global picture quantifying the impact of different error sources on the overall system performance. Finally, we introduce feedback control to compensate the errors caused by experimental imperfections and achieve significantly improved accuracy. These results provide a guide for optimizing the accuracy of microcomb-based MWP transversal signal processors.

This paper develops a two-layer optimization approach that provides energy-optimal control for vehicles and traffic signal controllers. The optimizer in the first layer computes the traffic signal timings to minimize the total energy consumption levels of approaching vehicles from upstream traffic. The traffic signal optimization can be easily implemented in real-time signal controllers, and it overcomes the issues in the traditional Webster’s method of overestimating the cycle length when the traffic volume-to-capacity ratio exceeds 50 percent. The second layer optimizer is the vehicle speed controller, which calculates the optimal vehicle brake and throttle levels to minimize the energy consumption of individual vehicles. The A-star dynamic programming is used to solve the formulated optimization problem in the second layer to expedite the computation speed so that the optimal vehicle trajectories can be computed in real-time and can be easily implemented in simulation software for testing. The proposed integrated controller is first tested on an isolated signalized intersection, and then an arterial network with multiple intersections to investigate the performance of the proposed controller under various traffic demand levels. The test results demonstrate that the proposed integrated controller can greatly improve energy efficiency with fuel savings up to 17.7%, at the same time enhancing traffic mobility by up to 47.18% reduction in traffic delay and up to 24.84% reduction in vehicle stops.

Multimodal therapy including surgery, radiation treatment and temozolomide (TMZ) is performed on glioblastoma (GBM). However, the prognosis is still poor and there is an urgent need to develop effective treatments to improve survival. Molecular biological analysis was conducted to exam-ine the signal activation patterns at GBM specimens and remains an open problem. Advanced macrolides, such as azithromycin, reduce the phosphorylation of p70 ribosomal protein S6 kinase (p70S6K), a downstream mammalian target of rapamycin (mTOR) effector, and suppress the proliferation of T-cells. We focused on its unique profile and screened for the antitumor activity of approved macrolide antibiotics. Clindamycin (CLD) reduced the viability of GBM cells in vitro. We assessed the effects of the candidate macrolide on the mTOR pathway through Western blotting. CLD attenuated p70S6K phosphorylation in a dose dependent manner. These effects of on GBM cells were enhanced by co-treatment with TMZ. Furthermore, CLD inhibited the expression of O6-methylguanine-DNA methyltransferase (MGMT) protein in cultured cells. In the mouse xenograft model, CLD and TMZ co-administration significantly suppressed the tumor growth and markedly decreased the number of Ki-67 (clone MIB-1) positive cells within the tumor. These results suggest that CLD suppresses GBM cell growth by the inhibiting mTOR signaling. Moreover, CLD and TMZ showed promising synergistic antitumor activity.

Wideband signal detection is an important problem in wireless communication. With the rapid development of deep learning (DL) technology, some DL-based methods are applied to wireless technology, and the effect is obvious. In this paper, we propose a novel neural network for multi-type signal detection that can locate signals and recognize signal types in wideband spectrogram. Our network utilizes the key point estimation to locate the rough centerline of signal region and identify class. Then, several regressions are carried out to achieve properties, such as local offset and border offsets of bounding box, which is further synthesized for a more fine location. Experimental results demonstrate that our method performs more accurate than other DL-based object detection methods previously employed for the same detection task. Specifically, our method runs obviously faster than existing methods, and abandons the anchor generation, which makes it more favorable for real-time applications.

We demonstrate a photonic RF integrator based on an integrated soliton crystal micro-comb source. By multicasting and progressively delaying the input RF signal using a transversal structure, the input RF signal is integrated discretely. Up to 81 wavelengths are provided by the microcomb source, which enable a large integration time window of ~6.8 ns, together with a time resolution as fast as ~84 ps. We perform signal integration of a diverse range of input RF signals including Gaussian pulses with varying time widths, dual pulses with varying time intervals and a square waveform. The experimental results show good agreement with theory. These results verify our microcomb-based integrator as a competitive approach for RF signal integration with high performance and potentially lower cost and footprint.

Wideband signal detection and identification are crucial for military and civilian fields such as communication reconnaissance and spectrum security. This paper systematically sorts out the mainstream technologies of wideband signal detection and identification, and expounds the main current short-wave wideband signal detection and identification work from three perspectives: traditional expert feature methods, combination of expert features and machine learning, and wideband signal detection and identification based on deep learning. Particularly, this paper focuses on the processing methods of current key signals such as short burst signals and frequency hopping signals, as well as the latest deep learning methods in the past five years. Finally, the shortcomings of the existing broadband signal detection and identification methods are summarized, and the future trend is predicted.

In this work, we present a real-time heart rate estimation method from a video using face detection, color-based signal extraction, and signal processing tech- niques. The proposed approach computes the heart rate by analyzing the color fluctuations in the facial region of interest (ROI). This report outlines the math- ematical formulation and results of the implementation.

Technological progress brings new tools to help society's development. In this context, the Internet of Things (IoT) helps to advance modern society. By connecting everyday objects and devices to the Internet, IoT enables benefits such as efficiency and automation, healthcare, environmental sustainability, safety, security, and data-driven decision-making. One of the possible technologies for devices' communication is LoRa, a wireless technology designed for the IoT that allows devices to communicate over long ranges using little battery power. This makes it useful for situations where it is needed to connect many devices spread out over a large area, like in smart cities or industrial settings. This paper aims to verify and evaluate the LoRa communication signal loss in a building environment. For this evaluation, we collected and processed data through experiments with LoRa links in the Instituto Federal de Pernambuco (IFPE) Campus.

Previous studies found that corilagin inhibits the growth of many cancer cells. Ovarian cancer is the deadliest gynecological malignancy, but research on the effects of corilagin on ovarian cancer is limited. This experiment aims to explore the impact of corilagin on ovarian cancer A2780 cell apoptosis and its mechanism of action to evaluate the prospects of corilagin in treating ovarian cancer. Corilagin significantly affects the A2780 cell cycle, reducing the proportion of G0/G1 and G2/M phase cells and blocking them in the S phase. Corilagin at low concentrations can cause A2780 cell apoptosis, mitochondrial membrane potential decline, and calcium influx. After the cells were stained with Acridine Orange, autophagosomes were observed under a fluorescence microscope and increased with the increase in concentration. The results of transcriptome sequencing showed that the effect of corilagin could cause differential expression of apoptosis-related genes in A2780 cells and concentrated on the PI3K-AKT pathway. The qPCR results showed that the expression of genes P53 and Bax in cells increased while the expression of BCL-2 decreased. The expressions of apoptotic factors caspase-9, caspase-3, p53-upregulated modulator of apoptosis (PUMA), and cytochrome C increased after the action of corilagin, indicating that corilagin can induce cell apoptosis. Corilagin can effectively inhibit the proliferation of A2780 cells, cause cell cycle arrest, and induce cell apoptosis. Moreover, it can trigger autophagy and has in vitro antitumor effects. It is a promising drug for treating ovarian cancer through the PI3K/P53 pathway.

Remote Photoplethysmography (rPPG) has emerged as a non-intrusive and promising physiological sensing capability in HCI research, gradually extending its applications in health-monitoring and clinical care contexts. With advanced machine learning models, recent datasets collected in real-world conditions have gradually enhanced the performance of rPPG methods in recovering heart-rate and heart-rate variability metrics. However, the signal quality of reference ground-truth PPG data in existing datasets is by and large neglected, while poor quality references negatively influence models. Here, this work introduces a new imaging blood volume pulse (iBVP) dataset of synchronized RGB and thermal infrared videos with PPG ground-truth signals from the ear and its high resolution signal quality labels, for the first time. Participants perform rhythmic breathing, head-movement, and stress-inducing tasks, which help reflect real-world variations in psycho-physiological states. This work conducts dense (per sample) signal quality assessment to discard noisy segments of ground-truth and corresponding video frames. We further present a novel end-to-end machine learning framework, iBVPNet that features an efficient and effective spatio-temporal feature aggregation for reliable estimation of BVP signals. Finally, this work examines the feasibility of extracting BVP signals from thermal video frames, which is underexplored. The iBVP dataset and source codes are publicly available for research use.

In view of the limitations of the existing eccentricity error separation method of the rotary table, an eccentricity error separation method based on the phase feature of the moiré signal of single reading head is proposed herein. A grating pair transmission model is established based on the analysis of the principle of the rotary table, thereby the influence of eccentricity error on the phase feature of the moiré signal in the rotation course of the rotary table is clarified, and the corresponding model between the phase feature spectral components and the eccentricity error is established. The verification experiments of the proposed method are carried out based on the laboratory-made circuit system. After verifying the accuracy of the data acquisition of the laboratory-made circuit board, the verification experiments of the eccentricity error separation effect of the proposed method are carried out. The experimental data are compared with those of the traditional method and the results show that the error between the two methods is 2.34μm and the relative error is 2.3%.

The guided ultrasonic wave (GUW) is extensively employed in non-destructive testing (NDT) for the purpose of detecting defects in aerospace vehicles, oil pipelines and mechanical equipment. The filtration of GUW signals, which often contain substantial environmental noise, is a crucial procedure in signal processing. This paper presents a novel denoising approach that combines Variational Mode Decomposition (VMD) with an enhanced Singular Value Decomposition (SVD). The VMD method is employed to preprocess the initial signal, thereby segregating the signal component from the noise component. Subsequently, the SampEn-SVD (Sample Entropy-SVD) method is utilized to extract the effective component from the VMD-preprocessed noise component. Finally, the VMD-preprocessed signal component and the SampEn-SVD-processed effective component are combined to yield the resultant signal, which effectively filters out the noise. The efficacy of this integrated denoising approach is substantiated through the examination of experimental signals. Furthermore, a comparative analysis is conducted to evaluate the efficacy of this method in relation to other denoising techniques. The results indicate that the SampEn-SVD method yields a superior signal-to-noise ratio (SNR) when processing the GUW signal transmitted through the steel strand. Moreover, the denoising procedure significantly reduces the discretization of characteristic parameters in the signal waveform, thereby addressing the issue of inadequate reproducibility in testing outcomes. Consequently, the denoised signal exhibits high fidelity and demonstrates a strong correlation between its combined eigenvector and strand stress.

TNF cytokine receptor TNFR1 protein plays an important role in immune response and autoimmune diseases. Previously, we demonstrated that the peptide of the innate immunity protein Tag7 (PGLYRP1), designated as 17.1, is able to perform the functions of a full-size Tag7 protein, namely, to inhibit the transmission of a signal through the TNFR1 receptor and activate this receptor in complex with the major heat shock protein Hsp70. In this study, we show that two peptides derived from 17.1 – 17.1A and 17.1B have different affinities to the TNFR1 receptor and the Hsp70 protein, and each of them is able to perform only one of the above functions: peptide 17.1A is only able to inhibit signal conduction through the TNFR1 receptor, and peptide 17.1B can only activate this receptor is in complex with Hsp70. Thus, it is possible to modulate the activity of TNFR1 receptor and further perform its specific inhibition or activation in the treatment of various autoimmune or oncological diseases.

Classical religious texts remain an essential part of human culture due to their undiminished influence on the advancement of civilization. Although their entirely divine origin is questioned repeatedly, explicit or implicit quoting and adherence to their basic guidelines are fundamental in modern society. In this respect, these documents’ inner structure and linguistic style appear to be pivotal. This paper considers the topic from the standpoint of small textual patterns classified using deep learning methods, traditionally applied to analyze short textual material like tweets. We divide the considered documents into small sequential chunks imitating tweets and categorizing them, classifying an entire text. The proposed method demonstrates that the religious text collections correspond to stable ”Twitter”-like structures that adequately reflect stylistic properties. So, concise word combinations seem to be an inborn textual attribute that adequately outlines the proposed multi-source authorship. This approach differs from traditional methods of analyzing classical religious documents, which are based on the consideration and interpretation of relatively long templates. The case study consists of three famous collections of Mosaic authorship in the Old Testament (Hebrew), Pauline authorship in the New Testament (Greek), and Al-Ghazali authorship (Arabic). The obtained results go well with most previously expressed evaluations and complement them with new implications, particularly in the authorship of two famous manuscripts attributed to Al-Ghazali.

Muscle spindles are encapsulated sensory organs found in most of our muscles. Prevalent models of sensorimotor control assume the role of spindles is to reliably encode limb posture and movement. Here, I argue that the traditional view of spindles is outdated. Spindle organs can be tuned by spinal γ motor neurons that receive top-down and peripheral input, including from cutaneous afferents. A new model is presented, viewing γ motor activity as an intermediate coordinate transformation that allows multimodal information to converge on spindles, creating flexible coordinate representations at the level of the peripheral nervous system. That is, I propose that spindles play a unique overarching role in the nervous system: that of a peripheral signal-processing device that flexibly facilitates sensorimotor performance, according to task characteristics. This role is compatible with previous findings and supported by recent studies with naturalistically active humans. Such studies have so far shown that spindle tuning enables the independent preparatory control of reflex muscle stiffness, the selective extraction of information during implicit motor adaptation, and for segmental stretch reflexes to operate in joint space. Incorporation of advanced signal-processing at the periphery may well prove a critical step in the evolution of sensorimotor control theories.

Room temperature superconductivity has recently been reported for a carbonaceous sulfur hydride (CSH) under high pressure by Snider et al [1]. The paper reports sharp drops in magnetic susceptibility as a function of temperature for five different pressures, that are interpreted as signaling a superconducting transition. Here I question the validity and faithfulness of the magnetic susceptibility data presented in the paper by comparison with the measured raw data reported by two of the authors of ref. [2]. This invalidates the assertion of the paper [1] that the susceptibility measurements support the case for superconductivity in this compound.

Sound signals from the respiratory system are largely the harbingers of human health. Early diagnosis of respiratory tract diseases is of great importance as it creates irreversible effects on human health when delayed. This diagnostic in the medical world has been made possible thanks to machine learning and signal processing analysis. The coronavirus epidemic, which is in question today and deeply shakes the whole world, has been revealed the importance of this issue even more. In terms of the coronavirus pandemic, it has become the focus of researchers to differentiate symptoms from similar diseases such as normal flu or influenza. Among these symptoms, the difference in cough sound has played a distinctive role in the proposed study. Several pioneering studies have proven that almost two-thirds of people who get corona have a dry cough. At this stage, the information of studies based on cough constitutes the main framework of our study. On the other hand, the basis of this study is based on machine learning algorithms. Clinical data collected under the supervision of doctors in a reliable environment was used as dataset. This dataset consists of 16 subjects suspected of the coronavirus with a specific patient demographic. In this study, using the polymerase chain reaction (PCR) test, suspected subjects were divided into two groups as negative and positive. The negative and positive labels represent the patient with non-COVID and with a COVID-19 cough respectively. Using the 3D plot or waterfall representation of the signal frequency spectrum, the salient features of the cough data are revealed. In this way, COVID-19 can be differentiated from other coughs by applying effective feature extraction and classification techniques. Power Spectral Density (PSD) based on Short Time Fourier Transform (STFT) and Mel Frequency Cepstral Coefficients (MFCC) were chosen as the efficient feature extraction method. Finally, among the classification techniques the Support Vector Machine (SVM) algorithm, was applied to the processed signals in order to identify and classify COVID-19 cough. In terms of results evaluation, the cough of subjects with COVID-19 has obtained with 95.86% classification accuracy thanks to the RBF kernel function of SVM and the MFCC method. In other words, the diagnosis of COVID-19 coughs was obtained with 98.6% and 91.7% sensitivity and specificity measures respectively.

We report a broadband radio frequency (RF) channelizer with up to 92 channels using a coherent microcomb source. A soliton crystal microcomb, generated by a 49 GHz micro-ring resonator (MRR), is used as a multi-wavelength source. Due to its ultra-low comb spacing, up to 92 wavelengths are available in the C band, yielding a broad operation bandwidth. Another high-Q MRR is employed as a passive optical periodic filter to slice the RF spectrum with a high resolution of 121.4 MHz. We experimentally achieve an instantaneous RF operation bandwidth of 8.08 GHz and verify RF channelization up to 17.55 GHz via thermal tuning. Our approach is a significant step towards the monolithically integrated photonic RF receivers with reduced complexity, size, and unprecedented performance, which is important for wide RF applications ranging from broadband analog signal processing to digital-compatible signal detection.

An experimental ultra wideband ground penetrating radar based on Golay complementary sequences is proposed to locate underground pipes. Golay complementary sequences with the code length of 1024 and frequency of 1 GHz are used as the probe signals. Two-dimensional image of the buried pipes is achieved by correlation method and back projection algorithm. The experimental results show that both the plastic pipe and metallic pipe can be located with a range resolution of 10 cm. Furthermore, as the Golay complementary sequences are a pair of complementary sequences, the sum of their correlation function yields twice the value of the peak at the target position and zero elsewhere. Thus, compared with the stepped frequency signal radar or chaotic signal radar, the Golay-based radar can significantly improve the signal noise ratio and has capability of deep detection.

Simple patterns often arise from complex systems. For example, human perception of similarity decays exponentially with perceptual distance. The ranking of word usage versus the frequency at which the words are used has a log-log slope of minus one. Recent advances in big data provide an opportunity to characterize the commonly observed patterns of nature. Those observed regularities set the challenge of understanding the mechanistic processes that generate common patterns. This article illustrates the problem with the recent big data analysis of collective memory. Collective memory follows a simple biexponential pattern of decay over time. An initial rapid decay is followed by a slower, longer lasting decay. Candia et al. successfully fit a two stage model of mechanistic process to that pattern. Although that fit is useful, this article emphasizes the need, in big data analyses, to consider a broad set of alternative causal explanations. In this case, the method of signal frequency analysis yields several simple alternative models that generate exactly the same observed pattern of collective memory decay. This article concludes that the full potential of big data will require better methods for developing alternative, empirically testable causal models.

The results of this study offer a potential to gain a better understanding of the mechanisms underlying the falls in the elderly. The results were recorded for a group of 27 women in a control group (CON) and 16 women in an experimental group (EXP), aged 60-70. Participants took part in the six-weeks Elderly Recreation Movement Program (ERMP) with the difference, that the EXP group practiced twice as often as the CON group. The measurement of variations in the index called limits of stability (LOS) was performed by application of Kistler force plate and the coactivation index (CI) was registered by means of sEMG. The results demonstrate the existence of statistically significant differences in terms of the principal outcome of the exercise time in the measurements of LOS (F (1.42) = 10.0, p = 0.003), and CI (F (1.42) = 10.5, p = 0.002). The effect of the program was associated with an increase the level of the maximum LOS, and a decrease of the CI level, especially in the experimental group. Hence, the implementation of an innovative ERMP exercise program results in the improvement of the physical capabilities of senior subjects and a reduction of the risk of falls.

Aiming at the defects of low precision and time cumulative error, an external wireless signal weighted centroid localization algorithm aided inertial positioning method is designed in this paper. According to the signal strength of each anchor node received at the test point, the distance between the anchor node and the anchor node is obtained by using the attenuation model of the wireless signal. Three anchor nodes are used to measure the distance between the anchor node and the measured point. We can obtain the area to be measured according to the actual situation, the position of the measured point is obtained by the weighted centroid localization algorithm and a combined model of wireless signal aided inertial navigation system is established. The simulation results show that the method can greatly improve the positioning accuracy and restrain the divergence of the longitude error and latitude error.

Background: Modern MEG devices include 102 sensor triplets containing one magnetometer and two planar gradiometers. The first processing step is often a signal space separation (SSS), which provides a powerful noise reduction. A question commonly raised by researchers and reviewers is which data should be employed in source reconstruction: (1) magnetometers only, (2) gradiometers only, (3) magnetometers and gradiometers together. The MEG community is currently divided about the proper answer and strong arguments in favor and against these three approaches often expressed. Methods: First, we provide theoretical evidence that both gradiometers and magnetometers contain the same information after SSS, and argue that they both result from the backprojection of the same SSS components. Then, we compare beamforming source reconstructions from magnetometers and gradiometers in real MEG recordings before and after SSS. Results: Without SSS, the correlation between source time series extracted from magnetometers and gradiometers was high, with Pearson correlation coefficient r=0.5-0.8. After SSS, these correlation values increased dramatically, reaching over 0.90 across all cortical areas. Conclusions: After SSS, almost identical source reconstructions (r>0.9) can be obtained with magnetometers and gradiometers, as long as regularization is selected appropriately to account for the different properties in magnetometers and gradiometers covariance matrices.

As the development of low-altitude economies and aerial countermeasures continues, the safety of unmanned aerial vehicles becomes increasingly critical, making the emitter identification in remote sensing practices more essential. Effective recognition of Radio Frequency (RF) signal attributes is a prerequisite for identifying emitters. However, due to the diverse wireless communication environments, RF signals often face challenges from complex and time-varying wireless channel conditions. These challenges lead to difficulties in data collection and annotation, as well as disparities in data distribution across different communication scenarios. To address this issue, this paper proposes a Progressive Maximum Similarity-based Unsupervised Domain Adaptation (PMS-UDA) method for RF signal attribute recognition. Initially, we introduce a noise perturbation consistency optimization method to enhance the robustness of the PMS-UDA method under low signal-to-noise conditions. Subsequently, a progressive label alignment training method is proposed, combining sample-level maximum correlation with distribution-level maximum similarity optimization techniques to enhance the similarity of cross-domain features. Finally, domain adversarial optimization method is employed to extract domain-independent features, reducing the impact of channel scenario. Experimental results demonstrate that the PMS-UDA method achieves superior recognition performance in automatic modulation recognition and RF fingerprint identification tasks, as well as cross both ground-to-ground and air-to-ground scenarios, compared to baseline methods.

In this study, the fundamentals of electroencephalography signals, their categorization into frequency sub-bands, the circuitry used for their acquisition, and the impact of noise interference on signal acquisition are examined. Additionally, design specifications for medical-grade and research-grade EEG circuits and a comprehensive analysis of various analog front-end architectures for electroencephalograph (EEG) circuit design are presented. Three distinct selected case studies are examined in terms of comparative evaluation with generic EEG circuit design templates. Moreover, a novel one-channel battery-supplied EEG analog front-end circuit designed to address the requirements of usage protocols containing strong com-pound muscle movements is introduced. Furthermore, a realistic input signal generator circuit is proposed that models the human body and the Electromagnetic Interference from its surroundings. Experimental simulations are conducted in 50 Hz and 60 Hz electrical grid environments to evaluate the performance of the novel design. The results demonstrate the efficacy of the proposed system, particularly in terms of bandwidth, portability, common mode rejection ratio , gain, suppression of muscle movement artifacts, electrostatic discharge and leakage current protection. Conclusively, the novel design is cost-effective and suitable for both commercial and research single-channel EEG applications. It can be easily incorporated in Brain Computer Interfaces and neurofeedback training systems.

Advanced chronic lymphocytic leukemia (CLL) is accompanied by increased circulating regula-tory T cells (Tregs) and increased susceptibility to severe infections, which were also shown to en-tail a striking induction of FOXP3 expression in Tregs. As homeostasis of the most suppressive CD45RA-FOXP3high activated Treg (aTreg) subset differs, it is critical to analyse homeostatic sig-naling in Treg subsets. Therefore, in this study, by using conventional and imaging flow cytome-try, we monitored STAT5 signaling/phosphorylation (pSTAT5) and investigated Treg subsets in relation to the Binet stage, the total tumor mass score (TTM) and disease course during follow-up of 37 patients with CLL. aTreg percentage was significantly increased among CD4+ T cells from patients with advanced disease and significantly correlated with the TTM. A subgroup of patients with higher aTreg percentages among CD4+FOXP3+ T cells at the start of therapy was character-ized by more frequent episodes of severe infections during follow-up, suggesting that aTreg frac-tion could represent a possible marker of severe disease course with infectious complications. Augmented homeostatic STAT5 signaling could support aTreg expansion, as higher pSTAT5 lev-els were significantly corelated with increased aTreg frequency among CD4+FOXP3+ T cells during follow-up of patients on therapy as well as following SARS-CoV-2 antigen-specific stimulation in vitro.

We here report the purification of a novel member of the galectin family, the β-Galactoside-binding lectin hRTL, from the marine sponge Chondrilla australiensis. The hRTL lectin is a tetrameric proto-type galectin with a subunit molecular weight of 15.5 kDa, consisting of 141 amino acids and sharing 92% primary sequence identity with the galectin CCL from the congeneric species C. caribensis. Transcriptome analysis allowed the identification of additional sequences belonging to the same family, bringing the total number of hRTLs to six. Unlike most other galectins, hRTLs display a 23 amino acids long signal peptide that, according to Erdman degradation, is post-translationally cleaved, leaving a N-terminal end devoid of acetylated modifications, unlike most other galectins. Moreover, two hRTLs display an internal insertion, which determines the presence of an unusual loop region that may have important functional implications. The characterization of the glycan binding properties of hRTL revealed that it had high affinity to-wards TF-antigen, sialyl TF, and type-1 N-acetyl lactosamine with a Galβ1-3 structure. When administered to DLD-1 cells, a colorectal carcinoma cell line expressing mucin-associated TF-antigen, hRTL could induce glycan-dependent cell death by activating MAP kinases, thereby inhibiting cancer cell proliferation.

This paper investigates the impact of adding exclusive two-wheeled vehicle lane based on motorcycle data and using reinforcement learning at one of Bandung’s heterogeneous intersections which uses data collected from ATCS Bandung. The Kiaracondong-Ibrahim Adjie intersection in Bandung is notorious for severe congestion, especially during rush hours. Traditional traffic management methods often fall short, necessitating innovative solutions to mitigate long wait times and extensive queue lengths. This study leverages Reinforcement Learning (RL), specifically Deep Q-learning Network algorithm, combined with introduction of additional two-wheeled vehicle lanes to optimize traffic flow at this busy intersection. The research involved configuring the SUMO platform to accurately simulate the intersection’s traffic conditions, including parameters such as lane widths and vehicle dynamics. The RL model was trained over 100 episodes using quantitative real traffic data from ATCS Bandung city. The training process minimize vehicle waiting time and queue length by adjusting traffic light phases dynamically. Results from the simulations indicated significant improvements in traffic management. Queue lengths in regular lanes decreased by 64.89% under RL control, while two-wheeled vehicle lanes saw a 26.39% reduction. Waiting times in regular lanes dropped by 80.49%, and in two-wheeled vehicle lanes by 39.96%. The study demonstrated that integrating DQN with dedicated two-wheeled vehicle lanes could substantially enhance traffic flow and reduce congestion at critical urban intersections. The findings underscore the potential of advanced RL techniques in urban traffic management. However, the study acknowledges the need for further research with more extensive resources and time to develop even more efficient traffic control systems. Future work should focus on refining these methods for broader application and exploring other innovative technologies to sustainably address urban traffic challenges.

Weak signal spectral detection is a serious problem in many applications, especially the target possesses certain frequency band and under low signal-to-noise ratio (SNR). A kind of novel technique based on pre-whitening scale-transformation symmetric bistable parallel stochastic resonance (SR) is proposed to solve the problem. Firstly, the pre-whitening can ensure the even distribution of the receiving signal to fit the requirement of SR processing. Secondly, the scale- transformation can help to utilize the weak signal improvement property especially under low frequency band more effectively. Thirdly, the symmetric bistable parallel SR can try to reduce the variance of the clutter and additive noise fluently. Fourthly, by subtracting the steady state re-sponse of the selected symmetric bistable SR system from the parallel SR output, the weak signal spectral detection objective can be realized successfully. Simulation results based on the real sea clutter radar data guarantee the effectiveness and applicability of the proposed symmetric bistable PSR processing approach.

In the field of quality control, the critical challenge of analyzing microdefects in steel filament holds significant importance. This is particularly vital as steel filaments serve as reinforced fibers in the use and applications within various component manufacturing industries. This paper addresses the crucial requirement of identifying and investigating microdefects on steel filaments. Eddy current signals are used for the identification of microdefects, and an in-depth investigation is conducted. The core objective is to establish the relationship between the depth of defects and the signals detected through the eddy current sensing principle. The threshold of eddy current instrument was set at 10%, corresponding to a created depth of 20 µm, to identify defective specimens. A total of 30 defective samples were analyzed, and the phase angles between the experimental and theoretical results were compared. The depths of defects ranged from 20 to 60 µm, with one sample having a depth exceeding 75 µm. The calculated threshold of 10.18% closely aligns with the set threshold of 10%, with a difference of only 1.77%. The resulting root mean square error (RMSE) was found to be 10.53 degrees, equivalent to 3.49 µm for the difference in depth and phase between measured results and estimated results. This underscores the methodology's accuracy and its applicability across diverse manufacturing industries.

This review explores the potential of Intelligent Reflecting Surfaces (IRS) to address limitations of traditional antennas and empower next-generation wireless networks. IRS technology offers a paradigm shift by passively manipulating radio waves, enhancing signal coverage, network capacity, and energy efficiency. IRS technology utilizes flat surfaces equipped with tiny, adjustable reflectors. Unlike traditional antennas that actively send and receive radio waves, IRS passively manipulates incoming signals by reflecting them in specific directions with controlled adjustments. This approach significantly improves signal coverage and strength, particularly in areas with poor reception. The review reveals the IRS technology offers significant advantages over traditional antennas. It can enhance signal coverage by reflecting radio waves, boost network capacity which allows networks to handle a larger number of users simultaneously, promote lower energy consumption compare, and unlock potential of 6G Networks and beyond. Additionally, IRS enables functionalities such as enhanced localization and ultra-fast data transfer. Integrating IRS with next-generation antennas unlocks new possibilities. This includes reconfigurable antennas that dynamically adjust radiation patterns, compact and low-profile designs, and multi-functional antennas that support various services simultaneously. In conclusion, this paves the way for a new generation of robust and sustainable wireless communication systems.

Passive radar detection emerges as a pivotal method for environmental perception and target de-tection within radar applications. Leveraging its advantages, including minimal electromagnetic pollution and efficient spectrum utilization, passive radar methodologies have garnered increasing interest. In recent years, there has been an increasing selection of passive radar signal sources, and the emerging 5G has the characteristics of high frequency band, high bandwidth, and a large number of base stations, which make it have significant advantages in passive radar. Therefore, this paper introduces a passive radar target detection method based on 5G signals and designs a rotating target speed measurement experiment. In the experiment, this paper validated the method of de-tecting rotating targets using 5G signals and evaluated the measurement accuracy, providing a research foundation for passive radar target detection using 5G signals and detecting rotating targets such as drone rotors.

This paper explores the application of wavelet analysis, a multiscale approach for enhancing visual clarity, in the context of image denoising, which reduces the impact of noisy pixels, caused by various factors such as electronic sensor limitations, low-light conditions, or transmission errors in digital imaging systems. This paper introduces some common noise types like Gaussian noise and processes of image denoising, eliciting the strength of wavelet analysis. As a powerful image denoising technology, wavelet analysis needs five steps to process the image, and the key step is thresholding. There are many kinds of wavelet, and each wavelet has different advantages and functions, which makes it suitable for different applications. Hence, wavelet analysis also makes a contribution in various fields beyond signal processing and data analysis, such as Biomedical Imaging and Geophysics and Seismology, where preserving image quality is essential for accurate analysis and interpretation. In short, this research highlights the promise of wavelet analysis, emphasizing the use of high- quality image data.

In forensic acoustics, a possible area of analysis is represented by unwanted sound that 1 is perceived as a source of intrusion or disturbance within a certain auditory context. This context 2 is defined as the "auditory scene" and refers to the set of sounds present in a specific environment. 3 The presence of unwanted sounds in the auditory scene can cause a wide range of negative effects, 4 including disturbance, discomfort, moral or immoral harm, and other types of negative impact on the 5 health and well-being of individuals exposed to noise. In 2022, the technical specification UNI/TS 6 11844:2022 dedicated to the measurement and analysis of intrusive noise was published. The standard 7 introduces the concept of intrusive noise and defines its calculation methods based on environmental 8 measurements. The purposes of this technical specification is to provide an objective support to 9 methods already in used in acoustic disputes, where the assessment of the annoyance of a noise is 10 often a subjective evaluation of the technician. This work delves into the application to some real 11 cases, identifying the potentiality and the limits of the standardized method.

RF photonic transversal signal processors, which combine reconfigurable electrical digital signal processing and high-bandwidth photonic processing, provide a powerful solution for achieving adaptive high-speed information processing. Recent progress in optical microcomb technology provides compelling multi-wavelength sources with compact footprint, yielding a variety of microcomb-based RF photonic transversal signal processors implemented by either discrete or integrated components. Although operating based on the same principle, processors in these two forms exhibit distinct performance. This letter presents a comparative investigation into their performance. First, we compare the performance of state-of-the-art processors, focusing on the processing accuracy. Next, we analyze various factors that contribute to the performance differences, including tap number and imperfect response of experimental components. Finally, we discuss the potential for future improvement. These results provide a comprehensive comparison of microcomb-based RF photonic transversal signal processors implemented using discrete and integrated components and provide insights for their future development.

Epigenetic modifications are closely related to diseases and physiological health, mainly including DNA methylation, RNA methylation, histone acetylation, and non-coding RNA. Recently, a large amount of research has been conducted on the detection of epigenetic modifications. Electrochemical biosensors, with their low cost, high sensitivity, high compatibility, and simple operation, have been widely used in the detection of epigenetic biomarkers. This review discusses the detection of epigenetic biomarkers using different electrochemical sensing methods. Here we discuss various aspects, including free labels, signal labeling, signal amplification, nano-based electrodes, and the combined use of other methods. By summarizing the existing electrochemical detection methods for epigenetic modifications, this review also proposes the future development trends and challenges for electrochemical biosensors in this field.

Considering the current needs of industry 4.0, especially in the condition of systems linked to artificial intelligence, this multidisciplinary concept work and difficult to execute, proposes the main idea of recognizing patterns using mathematical concepts of simple access and logical resolution of great potential. The objective of this work is to demonstrate a process for pattern recognition by applying the Fibonacci concept to vibration signals of hybrid dynamical systems. For this to be possible, it was necessary to use the concepts of preprocessing in a vector for pattern recognition, together with the concepts of the golden rule of Fibonacci, finally, all applied in the theorem of Jeffcott Rotors. The general result, from a technical point of view, demonstrates positivity and relationship of patterns, because, considering the aspect of the location between the values of the experimental and numerical result, both signs have similarities.

Digital medicine based on the integration of all medical data of a particular patient, has become a reality today, thanks to information technology. Traditional medical examinations can be supple-mented by assessment results of the oxidative-anti-oxidative (OAO) status of the body [1]. Elec-trochemical sensors are able to not only determine the integral indicators of the OAO system of the body, but also to depict details of the processes occurring in the system. The main obstacle to the widespread use of electrochemical sensors in medical diagnostics is the extremely small amount of the received information in comparison with tens of thousands of known human dis-eases. The problem can be eliminated only by rethinking the purpose of electrochemical measure-ment within the framework of thermodynamics of information processes and information theory. In the information paradigm of electrochemical analysis of biological fluids, a sample is considered as an electrochemical message created by a sensor. The purpose of electrochemical measurement is to obtain information in a volume sufficient to identify the sample composition within the range of possible concentrations of its components. The fundamentals of the thermodynamics of infor-mation processes are considered and conclusions that are of practical importance for the devel-opment of electrochemical sensors and analyzers are derived. It is shown that potentiostatic con-trol of the sensor is physically impacted by the electromechanical instability of the electrical double layer, which is the main source of sensor signal noise. Estimates are of a minimum amount of an-alytical signal information required for identification of a sample of a known composition, such as a biological fluid, are provided. Examples of highly informative analytical signals for flowing and stationary samples are presented. Problems related to the visualization of such signals are noted.

During the smelting process of AOD furnace, the unbalanced reaction of material will lead to the occurrence of splashing. It will not only damage the smelting equipment, but also seriously injure the personnel. In this study, first, the information of liquid level, audio information, and vibration information are detected by multiple sensors respectively. Then, the fused information is used to forecast the splashing. Finally, the multitasking fuzzy controller is used to suppress splashing. The results show that the method of forecasting and suppressing splashing can accurately forecast and achieve rapid suppression. Thus, the efficiency of smelting can be improved.

Background: This study aims to investigate the effects of visual neurofeedback stimulation on the brain activity in overweight cases. The neuroscience studies indicated the personal decision about eating under the impact of environmental factors such as (visually, smelling, tasting) is related to neural activity of the prefrontal lobe of the brain. Therefore, there were many attempts to modify the food intake behavior in overweight cases through the stimulation of the prefrontal cortex. However, the empirical viewing of EEG-neurofeedback experiments has not explicated the details about the effect of the EEG-NF, the specificity of positive treatment effects remains in a challenging scope.Methods: This study is a cue-exposure EEG-NF experiment to verify the hypothesis of effecting the EEG-NF on the electrical activity of PFC and modifying the general symptoms of food intake behavior in overweight cases. Twenty-four individuals were recruited as participants for this study. These participants were assigned randomly into two groups; the EX-Group (N=12) enrolled in 8 sessions of the EEG-NF experiment, and the C-Group (N=12) was listed in no EEG-NF sessions. The participants provided researchers with a self-report questionnaire relating to their observation of general symptoms of food intake behavior, and EEG signals recordings into the pre and posts stimulation phase. The power spectral density (PSD) method was applied for EEG parameters extraction.Results: The results of a two-way analysis of variance (ANOVA) explained that a significant variation in variables between the two groups after the EEG-NF experiment. The analysis of the quantitative variables indicated that the effect of EEG-NF experiment was a significant decrement in EEG power bands which significantly influenced changing the median of self-report questionnaire responses that is related to general symptoms of food intake behavior.Conclusions: This study provides preliminary support for the therapeutic potential of EEG-NF experiment that targets the prefrontal cortex, to influence neural processes underlying food intake behavior in overweight cases.

Apoptosis is associated with numerous phenotypical characteristics, and is thus studied with many tools. In this study, we compared two broadly used apoptotic assays: TUNEL and staining with an antibody targeting the activated form of an effector caspase. To compare them, we developed a protocol based on commonly used tools such as filters, zprojection and thresholding. Even though it is commonly used in imageprocessing protocols, thresholding remains a recurring problem. Here we analyzed the impact of processing parameters and readout choice on the accuracy of apoptotic signal quantification. Our results show that TUNEL is quite robust, even if image processing parameters can allow or not to detect subtle differences of the apoptotic rate. On the contrary, images from anticleaved caspase staining are more sensitive to handle and proved to necessitate to be processed more carefully. We then developed an open source Fiji macro automatizing most steps of the image processing and quantification protocol. It is noteworthy that the field of application of this macro is wider than apoptosis as it can perfectly be used to treat and quantify other kind of images.

Quantum noise limits the sensitivity of laser interferometric gravitational-wave detectors. Given the state-of-the-art optics, the optical losses define the lower bound of best possible quantum-limited detector sensitivity. In this work, we come up with the configuration which allows to saturate this lower bound by converting the signal recycling cavity to be a broadband signal amplifier using an active optomechanical filter. We will show the difference and advantage of such a broadband signal recycling scheme compared with the previous white-light-cavity scheme using the optomechanical filter in [Phys.Rev.Lett.115.211104 (2015)]. The drawback is that the new scheme is more susceptible to the thermal noise of the mechanical oscillator. To suppress the radiation pressure noise which rises along with the signal amplification, squeezing with input/output filter cavities and heavier test mass are used in this work.

In tele-monitoring, wireless body area networks (WBANs), sleep analysis and other applications involving electroencephalogram (EEG) signal, due to the high number of EEG recording channels, long recording time and several repetition of recordings to reach the highest signal-to-noise ratio, the amount of acquired data by the sensors is too large, demanding use of some compression procedure. Compressed sensing can be considered as one of the most effective compression methods in terms of compression ratio, which needs the underlying signal be sparse or have sparse representation in an appropriate domain. EEG signal is not sparse in time domain, therefore, in this paper correlation based weighted recursive least squares dictionary learning algorithm (CBW-RLS) is proposed that uses between-channel correlations to sparsify EEG signals. Due to the low-rank structure of EEG signals, exploiting between-channel correlations increase the sparsity level of the model while reducing the computational cost of dictionary learning procedure. This is done by merely updating the dictionary atoms which are involved in the sparse model of the previous data, reducing the total number of data used at each iteration and speeding up the dictionary learning algorithm. The simulation results show that the proposed method has better performance in terms of both quality of the EEG reconstruction and the computational cost compared to the other methods.

The vibration feature of weak gear fault is often covered in strong background noise, which makes it necessary to establish weak feature enhancement methods. Among the enhancement methods, stochastic resonance (SR) has the unique advantage of transferring noise energy to weak signals and has a great application prospection in weak signal extraction. But the traditional SR potential model cannot form a richer potential structure and may lead to system instability when the noise is too great. To overcome these shortcomings, the article presents a periodic potential underdamping stochastic resonance (PPUSR) method after investigating the potential function and system signal-to-noise ratio (SNR). In addition, system parameters are further optimized by using ant colony algorithm. Through simulation and gear experiments, the effectiveness of the proposed method was verified. We concluded that compared with the traditional underdamped stochastic resonance (TUSR) method, the PPUSR method had a higher recognition degree and better frequency response capability.

In this paper we present an efficient technique for the synthesis of very large sparse arrays, with arbitrary circularly symmetrical upper bounds for the pattern specifications. The algorithm, that is based on iterative smooth re-weighted L1 minimizations is very flexible, and is capable of achieving very good performances with respect to competitive algorithms. Furthermore, thanks to its efficiency, planar arrays of hundreds of wavelengths can be synthesized with limited computational effort.

The problem of event detection in general noisy signals arises in many applications; usually, either a functional form for the event is available, or a previous annotated sample with instances of the event that can be used to train a classification algorithm. There are situations, however, where neither functional forms nor annotated samples are available; then it is necessary to apply other strategies to separate and characterize events. In this work, we analyze 15 minute-long samples of an acoustic signal, and are interested in separating sections, or segments, of the signal which are likely to contain significative events. For that, we apply a sequential algorithm with the only assumption that an event alters the energy of the signal. The algorithm is entirely based on Bayesian methods.

The mental workload induced by a Web page is essential for improving the user’s browsing experience. However, continuously assessing the mental workload during a browsing task is challenging. In order to face this issue, this paper leverages the correlation between stimuli and physiological responses, which are measured with high-frequency, non-invasive psychophysiological sensors during very short span windows. An experiment was conducted to identify levels of mental workload through the analysis of pupil dilation measured by an eye-tracking sensor. In addition, a method was developed to classify real-time mental workload by appropriately combining different signals (electrodermal activity (EDA), electrocardiogram, photoplethysmography (PPG), electroencephalogram (EEG), temperature and eye gaze) obtained with non-invasive psychophysiological sensors. The results show that the Web browsing task involves on average four levels of mental workload. Also, by combining EEG with the PPG and EDA, the accuracy of the classification reaches 95.73 %.

Objectives: Cerebral edema, a prevalent consequence of brain injury, is associated with significant mortality and disability. Timely diagnosis and monitoring are crucial for patient prognosis. There is a pressing clinical demand for a real-time, non-invasive cerebral edema monitoring method. Ultrasound methods are prime candidates for such investigations due to their non-invasiveness nature; Methods: Acute cerebral edema by permanently occluding the left middle cerebral artery (MCA) was introduced in rats. Ultrasonic echo signals were collected at nine time points over a 24-hour period to extract features from both the time and frequency domains. Concurrently, histomorphological changes were examined. We utilized support vector machine (SVM), logistic regression (LR), decision tree (DT), and random forest (RF) algorithms for classifying cerebral edema types, and SVM, RF, and feedforward neural network (FNN) for predicting the cerebral infarction volume ratio; Results: The integration of 16 ultrasonic features associated with cerebral edema development with the RF model enabled effective classification of cerebral edema types with a high accuracy rate of 97.9%. Additionally, it provided an accurate prediction of the cerebral infarction volume ratio, with an R2 value of 0.8814; Conclusions: Our proposed strategy classifies cerebral edema and predicts the cerebral infarction volume ratio with satisfactory precision. The fusion of ultrasound echo features with machine learning presents a promising non-invasive approach for the monitoring of cerebral edema.

The simultaneous progress of integrated op- tical frequency comb (OFC) and radio frequency (RF) photonic signal processing technique have promoted the rapid development of real-time signal processing. Integrated optical frequency comb offer multiple wave- lengths as a powerful source for RF photonic sig- nal transversal filter. Here, we review development of real-time signal processing system consisting of inte- grated OFC and RF photonic signal transversal filter in chronological order, and focus on the applications of this system such as differentiator, integrator, Hilbert transformer, and image processor. We also discuss and present our outlook on more parallel functions and fur- ther integration of real-time signal processing system.

During HIV-1 virus assembly the genomic RNA (vRNA) is selected for packaging by the viral protein Gag because it contains a specific packaging signal, Psi. While there have been numerous studies of Gag-Psi interactions, there is almost no information on kinetic aspects of this interaction. We have investigated the kinetics of Gag binding to different RNAs using switchSENSE DRX2 technology. We measured the association rate of Gag binding to monomeric Psi, to a “Multiple Binding Site Mutant” Psi that is inactive for genome packaging in vivo, and to a scrambled Psi. We discovered that Gag binds more rapidly to Psi RNA than to the mutant or scrambled RNAs. Furthermore, rapid Gag association kinetics are retained within sub-regions of Psi: Gag associates more rapidly with RNA containing only the 3’ two of the three Psi stem-loops than with monomeric RNA containing the 5’ two stem-loops or a scrambled RNA. No differences were detectable with individual Psi stem-loops. Interestingly, the rate of binding of Gag molecules to Psi increases with increasing Gag concentration, suggesting cooperativity in binding. The results are consistent with the hypothesis that selectivity in packaging derives from kinetic differences in initiation of particle assembly.

In manufacturing chatter is an unwanted phenomenon that can lead to product quality reduction and tool wear. Real time chatter detection is key to preventing these issues and improving overall machining efficiency. In this paper we propose an unsupervised chatter detection method using autoencoders (AE) and Density-Based Spatial Clustering of Applications with Noise (DBSCAN) clustering algorithm that uses internal signals of Computer Numerical Control (CNC) machines. The proposed method starts by using an AE to extract features from raw internal signals collected from CNC machines. This step reduces the dimensionality of the data and captures the underlying patterns of chatter. Then the extracted features are fed into DBSCAN clustering algorithm which is a density based algorithm that groups similar data points and identifies outliers. We tested the proposed method with real world data collected from various CNC machines. The results show that our unsupervised chatter detection method has high accuracy, precision and recall, can detect chatter and distinguish it from normal machining. Also the method is robust to noise and can adapt to dynamic machining conditions. In summary our work presents an unsupervised chatter detection method using AE and DBSCAN clustering that uses internal signals of CNC machines. This method is a reliable and efficient solution for real time chatter detection so manufacturers can improve product quality, optimize machining process and reduce tool wear during machining.

In electromagnetic ultrasonic testing, it is difficult to recognize small-size bottom cracks by time of flight (ToF), and the lift-off fluctuation of the probe affects the accuracy and consistency of the inspection results. In order to overcome the difficulty, a novel EMAT (electromagnetic acoustic transducer)-PEC (pulse eddy current) composite sensor is designed. We use amplitude of bottom echo recorded by EMAT to identify the tiny bottom crack as well as the amplitude of PEC signals picked up by the integrated symmetric coils to measure the average lift-off of the probe in real time. Firstly, the effects of lift-off and bottom cracks on amplitude of bottom echo are distinguished combining the theoretical analysis and finite element method (FEM). And then an amplitude correction method based on the fusion of EMAT and PEC signals is proposed to reduce the impact of lift-off on the defect signal. The experimental results demonstrate that the designed composite sensor can effectively detect the bottom crack as small as 0.1mm* 0.3mm. The signal fusion method can accurately correct the amplitude of defect signal and the relative error is less than ±8%.

In this article, we propose a circuit to imitate the behavior of a Reward-Modulated Spike-Timing-Dependent Plasticity synapse. When two neurons in adjacent layers produce spikes, each spike modifies the thickness of the common synapse. As a result, the synapse’s ability to conduct impulses is controlled, leading to an unsupervised learning rule. By introducing a reward signal, reinforcement learning is enabled by redirecting the growth and shrinkage of synapses based on signal feedback from the environment. The proposed synapse manages the convolution of the emitted spike signals to promote either the strengthening or weakening of the synapse, which is represented as the resistance value of a memristor device. As memristors have a conductance range that may differ from the available current input range of typical CMOS neuron designs, the synapse circuit can be adjusted to regulate the spike’s amplitude current to comply with the neuron. The circuit described in this work allows for the implementation of fully interconnected layers of neuron analog circuits. This is achieved by having each synapse reconform the spike signal, thus removing the burden of providing enough power from the neurons to each memristor. The synapse circuit was tested using a CMOS analog neuron described in the literature. Additionally, the article provides insight into how to properly describe the hysteresis behavior of the memristor in Verilog-A code. The testing and learning capabilities of the synapse circuit are demonstrated in simulation using the Skywater-130nm process. The article’s main goal is to provide the basic building blocks for Deep Neural Neural Networks relying on spiking neurons and memristors as the basic processing elements to handle spike generation, propagation, and synaptic plasticity.

Vibration signal analysis is regarded as a fundamental approach in diagnosing faults in rolling bearings, and recent advancements have shown notable progress in this domain. However, the presence of substantial background noise often results in the masking of these fault signals, posing a significant challenge for researchers. In response, an Adaptive Denoising Autoencoder (ADAE) approach is proposed in this paper. The data representations are learned by the encoder through convolutional layers, while the data reconstruction is performed by the decoder using deconvolutional layers. Both the encoder and decoder incorporate adaptive shrinkage units to simulate denoising functions, effectively removing interfering information while preserving sensitive fault features. Additionally, dropout regularization is applied to sparsify the network and prevent overfitting, thereby enhancing the overall expressive power of the model. To further enhance ADAE's noise resistance, shortcut connections are added. Evaluation using publicly available datasets under scenarios with known and unknown noise demonstrates that ADAE effectively enhances the signal-to-noise ratio in strongly noisy backgrounds, facilitating accurate diagnosis of faults in rolling bearings.

This study analyzes the efficacy of trapezius muscle electromyography (EMG) in discerning mental states, namely stress and meditation. Fifteen healthy participants were monitored to assess their physiological responses to mental stressors and meditation. Sensors were affixed to both the right and left trapezius muscles to capture EMG signals, while simultaneous electroencephalography (EEG) was conducted to validate cognitive states. Our analysis of various EMG features, considering frequency ranges and sensor positioning, revealed significant changes in trapezius muscle activity during stress and meditation. Notably, low-frequency EMG features facilitated enhanced stress detection. For accurate stress identification, sensor configurations can be limited to the right trapezius muscle. Furthermore, the introduction of a novel method for determining asymmetry in EMG features suggests that applying sensors on bilateral trapezius muscles can improve the detection of mental states. This research presents a promising avenue for efficient cognitive state monitoring through compact and convenient sensing.

The increasing focus on the development of positioning techniques reflects the growing interest in applications and services based on indoor positioning. Many applications necessitate precise indoor positioning or tracking of individuals and assets, leading to rapid growth in products based on these technologies in certain market sectors. Ultrasonic systems have already proven effective in achieving the desired positioning accuracy and refresh rates. The typical signal used in ultrasonic positioning systems for estimating the range between the target and reference points, specifically the linear chirp, can undergo shape aberration due to the effects of acoustic diffraction when the aperture exceeds a certain limit. The extent of the aberration is influenced by the shape and size of the transducer, as well as the angle at which the transducer is observed by the receiver. This aberration also impacts the shape of the cross-correlation, causing it to lose its characteristic easily detectable single global peak. In such instances, cross-correlation techniques yield results with a significantly higher error than anticipated. In this study, an alternative technique to global peak detection is proposed, leveraging the inherent symmetry observed in the shape of the aberrated cross-correlation. The numerical simulations, performed using the academic acoustic simulation software Field II, conducted using a typical ultrasonic chirp and ultrasonic emitter, compare the classical and the proposed range techniques in a standard office room. The results demonstrate that the proposed technique enables accurate range estimation even in the presence of severe cross-correlation shape aberrations. This allows the use of emitting transducers with a much larger aperture than that allowed by the classical cross-correlation technique. Consequently, it becomes possible to have greater acoustic power available, leading to improved Signal-to-Noise Ratio (SNR).

Muscle fatigue caused by using staplers affects the surgical procedures of surgeons. Compared to manual staplers, electric staplers decrease the muscle fatigue by replacing repeated gripping and releasing with automatic model. Still powered by the battery, the electric staplers are confronted with new operation fatigue due to the extra weight of the battery. The weight and manual operation of the electric stapler can cause user's muscle fatigue. To tackle the unsettled fatigue issue, the study is to propose a new design method to offset the influence of extra weight of the battery attached to the electrical stapler by changing the opening and closing of the stapler end clamp to electric control. The purpose of this study is to verify whether the design of this electric stapler can offset the impact of weight. Experiments are set up to test the feasibility of the design on 12 male Chinese surgeons. The muscle fatigue is indicated by measuring the EMG (electromyography) signal, and the stapler's working effect is indicated by measuring the end movement of the stapler. The result shows the new-designed stapler reduce the operation fatigue, counteracting the impact of the battery weight.

Target recognition mainly includes three approaches: optical image-based, echo detection-based, and passive signal analysis-based methods. Among them, the passive signal-based method is closely integrated with practical applications due to its strong environmental adaptability. Based on passive radar signal analysis, we design an "end-to-end" model that cascades a noise estimation network with a recognition network to identify working modes in noise environment. The noise estimation network is implemented based on U-Net, which adopts a method of feature extraction and reconstruction to adaptively estimate the noise mapping level of the sample, which can help the recognition network to reduce noise interference. Focusing on the characteristics of radar signal, the recognition network is realized based on Multi-Scale Convolutional Attention Network (MSCANet). Firstly, the deep group convolution is used to isolate the channel interaction in the shallow network. Then, through the multi-scale convolution module, finer-grained features of the signal are extracted without increasing the complexity of the model. Finally, the self-attention mechanism is used to suppress the influence of low-correlation and negative-correlation channels and spaces. This method overcomes the problem that the conventional method is seriously disturbed by noise. We validated the proposed method in 81 kinds of noise environments, achieving an average accuracy of 94.65%. Additionally, we discussed the performance of six machine learning algorithms and four deep learning algorithms. Compared to these methods, proposed MSCANet achieved an accuracy improvement of approximately 17%. Our method demonstrates better generalization and robustness.

Small molecule modulators of neurotensin receptor 1 (NTSR1), a class A G protein-coupled receptor (GPCR), has been emerging as promising therapeutics for psychiatric disorders and cancer. Interestingly, a chemical group substitution of NTSR1 modulators can launch different downstream regulation, highlighting the significance of deciphering the internal fine-tuning mechanism. Here, we conducted synergistic application of Gaussian accelerated molecular dynamics simulation, conventional molecular dynamics simulation, and Markov state models (MSM) to investigate the underpinning mechanism of ‘driver chemical groups’ of modulators triggering inverse signaling. The result indicated that the flexibility of leucine moiety in NTSR1 agonists contributes to the inward displacement of TM7 through a loosely coupled allosteric pathway, while the rigidity of adamantane moiety in NTSR1 antagonists leads to unfavorable downward transduction of agonistic signaling. Furthermore, we found that R3226.54, Y3196.51, F3537.42, R1483.32, S3567.45 and S3577.46 may play a key role in inducing the activation of NTSR1. Together, our findings not only highlight the ingenious signal transduction within class A GPCRs, but also lay a foundation for the development of targeted drugs harboring different regulatory function of NTSR1.

Strong evidence indicates that insulin resistance contributes to the development of Alzheimer´s disease by promoting inflammation, oxidative stress, and blood vessel damage. Conversely, neuroinflammation induces insulin resistance by targeting insulin signaling molecules: the insulin receptor substrates 1 and 2 (IRS1/2). In addition, neuroinflammation is strongly linked to reduced levels of brain-derived neurotrophic factor (BDNF) expression. BDNF is a key factor for neuronal survival, and its expression is compromised in neurodegenerative disorders. In this study, we show that, in a triple-transgenic (3xTg) mice model of Alzheimer’s disease, the BDNF and IRS2 but not the IRS1 mRNA expression levels were reduced in the hippocampus, together with higher levels of TNFα, compared with wild-type mice. Subgroups of control and 3xTg mice received short and long treatments of Abscisic Acid (ABA), a phytohormone with anti-inflammatory and insulin-sensitizing capabilities. We found that the short ABA treatment can increase the IRS1 and IRS2 mRNA expression both in wild-type and 3xTg mice, concomitant with reducing pro-inflammatory cytokine TNFα in 3xTg mice. However, earlier, and thus longer treatments are required to rescue the BDNF mRNA levels. Our data strongly confirm that ABA administration is a potential treatment to prevent Alzheimer´s disease, via lowering neuroinflammation, potentially rescuing insulin signaling molecules and BDNF mRNA expression.

In this work, we studies the principle of ground electrode current field through ground communication technology, signal design, and optimal working mode of excitation source, so as to adapt the working mode, working frequency, and transmission medium condition of signal transmission. Through waveform design, energy is concentrated in the main conduction direction, which is beneficial for signal filtering at the receiving end and achieving high reliability data transmission; On this basis, on-site environmental testing was conducted to verify the detection and recognition technology of weak signals. Signal design and detection recognition are a very important part of the grounding electrode current field through ground communication technology. The grounding electrode current field through ground communication technology is mainly applied to solve the problem of communication between rescue personnel and trapped personnel before and during tunnel engineering collapse and rescue.

EMG analysis is becoming increasingly important in many research and clinical applications, including muscle fatigue detection, control of robotic mechanisms and prostheses, clinical diagnosis of neuromuscular diseases and quantification of force. However, electromyographic signals can be contaminated by various types of noise, interference and artifacts, which can lead to misinterpretation of the data acquired using this method. Even assuming best practices, the collected signal may still be altered by such contaminants. The aim of this paper is to review methods employed to reduce contamination of single channel EMG signals. This review is limited to methods performed directly on the measured EMG signal and those that allow total reconstruction of the EMG signal. Subtraction methods used in the time domain, denoising methods performed after signal decomposition and hybrid methods are assessed. It is defended that individual methods may be more or less suitable for a particular application depending on contaminant(s) present in the signal and on the specific requirements of the application.

Cardiac monitoring based on wearable photoplethysmography (PPG) is widespread because of its usability and low cost. Unfortunately, PPG is negatively affected by various types of disruptions, which could introduce errors to the algorithm that extracts Pulse Rate Variability (PRV). This study aims to identify the nature of such artifacts caused by various types of factors under the conditions of precisely planned experiments. We also propose methods for their reduction based solely on the PPG signal while preserving the frequency content of PRV. The accuracy of PRV derived from PPG was compared to Heart Rate Variability (HRV) derived from the accompanying recorded ECG. The results indicate that filtering PPG signals using the Discrete Wavelet Transform and its inverse (DWT/IDWT) is suitable for removing slow components and high-frequency noise. Moreover, the main benefit of amplitude demodulation is better preparation of the PPG to determine the duration of pulse cycles and reduce the impact of some other artifacts. Postprocessing applied to HRV and PRV indicates that the correction of outliers based on local statistical measures of signals and the AR model is only important when PPG is of low-quality and has no effect under good signal quality. The main conclusion is that DWT/IDWT, followed by amplitude demodulation, enables the proper preparation of the PPG signal for the subsequent use of PRV extraction algorithms. However, postprocessing in the proposed form should be applied more in the situations of observed strong artifacts than in motionless laboratory experiments.

Due to the increased use of memristors, and its many applications, the use of emulators has grown in parallel to avoid some of the difficulties presented by real devices such as variability and reliability. In this paper, we present a memristive emulator designed using a Switched Capacitor (SC), this is, an analog component/ block and a control part or block implemented using stochastic computing (SCo) and therefore fully digital. Our design is thus a mixed signal circuit. Memristor equations are implemented using stochastic computing to generate the control signals necessary to work with the controllable resistor implemented as switched capacitor.

Determining the vibration environment is crucial to analyzing a design of any mechanical system, especially such dynamic systems as sounding rockets. Accuracy of measurement using accelerometers could be improved by application of mechanical vibration filtering and amplifying devices. This work presents a theoretical description of a tunable filter and amplifier. Principle of work is provided as well as results from application of the device on a sounding rocket are provided. It is shown that implementation of such devices allowed for enhancing the accuracy of acceleration measurements. Conclusions on future implementations are also provided.

We suggest a deep learning based sensor signal processing method to remove chemical, kinetic and electrical artifacts from ion selective electrodes’ measured values. An ISE is used to investigate the concentration of a specific ion from aqueous solution, by measuring the Nernst potential along the glass membrane. However, application of ISE on a mixture of multiple ion has some problem. First problem is a chemical artifact which is called ion interference effect. Electrically charged particles interact with each other and flows through the glass membrane of different ISEs. Second problem is the kinetic artifact caused by the movement of the liquid. Water molecules collide with the glass membrane causing abnormal peak values of voltage. The last artifact is the interference of ISEs. When multiple ISEs are dipped into same solution, one electrode’s signal emission interference voltage measurement of other electrodes. Therefore, an ISE is recommended to be applied on single-ion solution, without any other sensors applied at the same time. Deep learning approach can remove both 3 artifacts at the same time. The proposed method used 5 layers of artificial neural networks to regress correct signal to remove complex artifacts with one-shot calculation. Its MAPE was less than 1.8% and R² of regression was 0.997. A randomly chosen value of AI-processed data has MAPE less than 5% (p-value 0.016).

Chickens have extensive phenotypic variation. The Wuhua yellow chicken (WHYC) is an important traditional yellow-feathered chicken in China, characterized by white tail feathers, white flight feathers, and strong disease resistance. However, the genomic basis of traits associated with WHYC is still poorly understood. In this study, whole genome resequencing was performed with an average coverage of 20.77-fold to investigate heritable variation and identify selection signals in WHYC. Reads were mapped onto the chicken reference genome (Galgal5) with a coverage of 85.95%. After quality control, 11,953,471 SNPs and 1,069,574 InDels were obtained. In addition, 41,408 structural variants and 33,278 copy number variants were found. A comparative genomic analysis of WHYC and other yellow-feathered chicken showed that selected regions were enriched in genes involved in transport and catabolism, immune system, infectious diseases, signal transduction, and signaling molecules and interaction. Several genes associated with disease resistance were identified, including IFNA, IFNB, CD86, IL18, IL11RA, VEGFC, and ATG10. Furthermore, PMEL and TYRP1 may contribute to the coloring of white feathers in WHYC. These findings improve our understanding of the genetic characteristics of WHYC and may contribute to future breed improvement.

In the recent years, intelligent data-driven faultdiagnosis methods on gearboxes have been successfully developedand popularly applied in the industries. Currently, most ofthe machine learning techniques require that the training andtesting data are from the same distribution. However, thisassumption is difficult to be met in the real industries, sincethe gearbox operating conditions usually change in practice,which results in significant data distribution gap and diagnosticperformance deteriorations in applying the learned knowledgeon the new conditions. This paper proposes a deep learning-based domain adaptation method to address this issue. Theraw current signals are directly used as the model inputs fordiagnostics, which are easy to collect in the real industries andfacilitate practical applications. The maximum mean discrepancymetric is introduced to the deep neural network, the optimizationof which guarantees the extraction of generalized machineryhealth condition features across different operating conditions.The experiments on a real-world gearbox condition monitoringdataset validate the effectiveness of the proposed method, whichoffers a promising tool for cross-domain diagnosis in the realindustries.

Titanium’s accelerating usage in global markets is attributable to its distinctive combination of physical and metallurgical properties. The key to best utilizing titanium is to exploit these characteristics, especially as they complement one another in a given application, rather than to just directly substitute titanium for another metal. Titanium alloy are extensively used in aerospace applications such as components in aero-engines and space shuttles, mainly due to their superior strength to weight ratio. For these demanding applications functionality and reliability of components are of great importance. To increase flight safety, higher sensitivity inspections are sought for rotating parts. Increased sensitivity can be applied at the billet stage, the forging stage, or both. Inspection of the forging geometry affords the opportunity to apply the highest sensitivity due to the shorter material paths when compared to those required for billet inspections. Forging inspection is typically performed for titanium (Ti) rotating parts with immersion inspection and fixed-focus, single-element transducers. Increased gain is required with depth because the ultrasonic beam attenuates with distance and diverges beyond the focus position that is placed near the surface. The higher gain that is applied with depth has the effect of increasing the UT noise with depth. The relationships between the UT noise, selection of the examination technique and the smallest detectable defect are presented in this material.

We show that combining vibrational spectroscopy with signal processing can result in a scheme for ultrasensitive detection of molecules. We consider the vibrational spectrum as a signal on the energy axis and apply a matched filter on that axis. On the example of a nerve agent molecule, we show that this allows detecting a molecule by its vibrational spectrum even when the recorded spectrum is completely buried in noise, when conventional spectroscopic detection is impossible. Detection is predicted to be possible with signal-to-noise ratios in recorded spectra as low as 0.1. We study the importance of spectral range used for detection as well as of the quality of the computed spectrum used to program the filter, specifically, the role of anharmonicity, of the exchange correlation functional, and of the basis set. The use of the full spectral range rather than of a narrow spectral window with key vibrations is shown to be advantageous, as well as accounting for anharmonicity.

People localization is a key building block in many applications. In this paper, we propose a deep learning based approach that significantly improves the localization accuracy and reduces the runtime of Wi-Fi based localization systems. Three variants of the deep learning approach are proposed, a sub-task architecture, an end-to-end architecture, and an architecture that incorporates prior knowledge. The performance of the three architectures under different conditions is evaluated and the significant improvement of the three architectures over existing approaches is demonstrated.