The aim of this work is to present a design approach of a Shock-Induced Combustion Ramjet (Shcramjet) inlet, and present its optimization in terms of the flow and geometrical parameters. The flow properties of mixed compression type inlet of a Shcramjet are examined using analytical and numerical techniques. The geometries obtained with variations in the wedge angles, length, height and cowl lip positions are used to study the flow characteristics of inlet, identifying bow shock temperature ratio as the optimization parameter. The two-dimensional geometries of two-shock and three-shock inlet models designed analytically for shock-on-lip condition at Mach 12.5 and an altitude of 32.5 km are numerically simulated in OpenFOAM CFD Toolbox. A density based compressible CFD solver based on central upwind schemes of Kurganov and Tadmore is used to solve 2D inviscid Euler equations. The inlet total pressure recovery is expressed as a function of temperature ratios of compression shocks, and is found to have a maxima at a bow shock temperature ratio at the design condition when the bow and external shocks have equal strengths. The effect of considering the flow to be calorically imperfect is studied numerically, and the deviation from the analytical design is presented.

Understory plants are important components of forest ecosystem productivity and diversity. Compared to biomass models of overstory canopy trees, few are available for understory saplings and shrubs and therefore their roles in estimation of forest carbon pools are often ignored. In this study, we harvested 24 understory species including 4 saplings, 9 tree-like shrubs and 11 typical shrubs in coniferous and broadleaved mixed forest in northeastern China and developed the best fit allometric equations of above- and below-ground and total biomass by species-specific or multispecies using morphological measurements of basal diameter, height and crown area as independent variables. The result showed that single basal diameter, height or crown area had good explanatory power for both species-specific and multispecies (p<0.001). The best-fit models included only basal diameter in sapling and tree-like shrubs, and combinations of crown area, height, and basal diameter in typical shrubs. The logarithmic model was most desired among the 4 model forms of linear, quadratic, multiple linear and logarithmic, for species-specific and multispecies. The models we developed should help the estimation of forest ecosystem carbon stocks, especially for belowground component, and provide tools for quantification of individual species biomass of understory plants.

A novel geometric interpretation of the Minkowski metric is provided, which offers a different and more intuitive approach to phenomena in special relativity. First it is shown that a change of basis in Minkowski space is the equivalent of a change of basis in Euclidean space if a basis element is replaced by its dual element, constituting a mixed basis set. The methodology of the proof includes infinitesimal changes of basis using the Lie-algebras of the involved groups. As a consequence, a direct mapping between Euclidean and Minkowski space is defined. Second, a measuring device called a local, flat observer is defined in Euclidean space and it is shown, that this device uses a mixed basis when measuring distances. Combining these steps, it is concluded that a local, flat observer in a four-dimensional Euclidean spacetime measures a Minkowski spacetime.

Human-Computer Interaction, including technology-aided instruction, is beginning to focus on virtual reality (VR) technology due to its ability to support immersive learning, teaching through simulation, and gamification of learning. These systems can deliver high-level multisensory learning experiences that are important in the teaching of many subjects, especially those involving abstract concepts or requiring spatial skills, such as organic chemistry. Haptic experiences with VR, however, remain a challenge. In addition, development have focused on general entertainment/gaming; VR systems in chemistry implement simulations of the chemistry laboratory and other advanced systems whereas those that support safe, game-like, immersive and multisensory learning of organic chemistry with haptics at pre-university education levels are scarce. We developed the VR Multisensory Classroom (VRMC) as an immersive learning environment within a VR head-mounted display, where learners employ hand movements to build hydrocarbon molecules and experience haptic feedback through gloves with built-in sensors and hand-tracking with the Leap Motion system. We report here the evaluation of the first prototype by learners from diverse backgrounds who reported on the ability of the VRMC to support high engagement, motivation, interest and organic chemistry learning as well as diverse learning styles. The VRMC is a novel VR classroom that supports immersive learning in molecular organic chemistry with haptics for multisensory learning.

Purpose: This paper extends previous works to include the role of therapeutic gardens in the healing environment as an intervention for bettering the clinical outcomes of Alzheimer’s and dementia patients, the positive impact of healing gardens and the innovative application of technologies with nature, for promoting cognitive rehabilitation in this particular patient population.Methods: Using ISI Web of Science, PubMed, ProQuest Central, MEDLIN, Scopus and Google Scholar, a relevant literature search on the positive health implications of therapeutic gardens on Alzheimer’s and dementia patients’ in the healthcare milieu was conducted.Results: Health implication of therapeutic gardens on Alzheimer’s and dementia patients’ spans across physical, social, psychological and cognitive effects. Virtual reality (VR) technologies offer positive cognitive outcomes to Alzheimer's disease (AD) and dementia patients.Conclusion: Therapeutic gardens should be extended for speedier recovery of other patient populations. Future directions in the design of healthcare gardens with a focus on patient experience are inferred.

Background: Since the advent of virtual reality (VR), it has been used in medical education for surgical training and anatomy teaching. Recently, other modalities of extended reality (XR) such as augmented reality (AR) and mixed reality (MR) has also made its way into medical education. Although there has been research validating XR’s use in medical education, there have been few studies on the research trends of the different XR modalities. The paper aims to compare the research trends of the XR modalities in general and in terms of the medical fields studied and outcomes measured. Methods: Web of Science was searched, and preliminary data was extracted to analyze the general trend. Inclusion and exclusion criteria were then applied, and finalized articles were analyzed and grouped based on the medical field studied and outcomes measured. Results: 31 articles on VR, eight on AR and one on MR were included in the final analysis. We found that there is increasing research in VR since 1990 and AR since 2008. The research in MR is constant. Most of the papers on VR studied endoscopic surgery and anatomy whereas AR studied mostly anatomy and endovascular procedures. Using Miller’s prism of clinical competence, the competency measured most for VR and AR is “show”. Discussion and conclusion: Advancement in computing, communication and display technologies since 1990 may contribute to the increase in research on VR whereas the ubiquity of smartphone since 2008 may explain the increase in research on AR. Although both VR and AR are used in surgical training and anatomy teaching, we found possible strengths of VR in counseling and AR in practical skills. The competency "show" was measured most as most of the papers were on surgery, and the XR simulators used can capture surgical parameters

The human mind is multimodal. Yet most behavioral studies rely on century-old measures of behavior—task accuracy and latency (response time). Multimodal and multisensory analysis of human behavior creates a better understanding of how the mind works. The problem is that designing and implementing these experiments is technically complex and costly. This paper introduces versatile and economical means of developing multimodal-multisensory human experiments. We provide an experimental design framework that automatically integrates and synchronizes measures including electroencephalogram (EEG), galvanic skin response (GSR), eye-tracking, virtual reality (VR), body movement, mouse/cursor motion and response time. Unlike proprietary systems (e.g., iMotions), our system is free and open-source; it integrates PsychoPy, Unity and Lab Streaming Layer (LSL). The system embeds LSL inside PsychoPy/Unity for the synchronization of multiple sensory signals—gaze motion, electroencephalogram (EEG), galvanic skin response (GSR), mouse/cursor movement, and body motion—with low-cost consumer-grade devices in a simple behavioral task designed by PsychoPy and a virtual reality environment designed by Unity. This tutorial shows a step-by-step process by which a complex multimodal-multisensory experiment can be designed and implemented in a few hours. When conducting the experiment, all of the data synchronization and recoding of the data to disk will be done automatically.

The rising popularity of virtual reality has seen a recent push in applications, such as, social media, educational tools, medical simulations, entertainment and training systems. With virtual realitythe ability to engage users for specific purposes, provides opportunities to entertain, develop cognitive abilities and technical skills outside of the standard mediums (e.g., the television or theclassroom) thereby optimizing exposure with realistic (live) opportunities. However, before these applications of virtual reality become more widespread, there are a number of open questions andissues that must be addressed including limitations, challenges, relationships between fidelity, multi-modal cue interaction, immersion, and knowledge transfer and retention. In this article, we begin with a brief overview of virtual reality methods, followed by a discussion of virtual reality and its applications (both historically, currently and in the future). We review virtual reality trends both from the early artistic days through to current day state of the art technological advancements. We explore emerging and futuristic breakthroughs - and their applications in virtual reality - showing how virtual reality will go way beyond anything we could envision. Infact, after reading this article, we hope the reader will agree, that virtual reality, is possibly one of the most powerful mediums of our time. While the earliest mechanistic virtual reality prototypes (e.g., Sensorama) allowed us to view stereoscopic 3D images accompanied by stereosound, smells, as well as wind effect - set the foundation and direction for future pioneers - there have been spearheaded developments which have continually pushed the concept of virtual reality to new domains. As virtual reality evolves, many new and yet-to-be-imagined applications will arise, but we must have understanding and patience as we wait for science, research andtechnology to mature and improve. The article ends with a short overview of future directions based upon recent breakthroughs in research and what this will mean for virtual reality in the coming years.

Although proposition of “Virtual Reality” (VR) and “Augment Reality” (AR) can be traced back to the 60s, both areas are actually blooming in recent decades. Thanks to the latest deep learning techniques, an enormous advance in computer vision research community has taken place. Since VR and AR are highly related to computer vision tasks, these areas have enjoyed the benefits as well. Yet there is no sufficient survey on such impact and new research areas arising from it. This paper mainly focuses on the latest research progress in ACM Symposium on Eye Tracking Research & Applications (ETRA) 2019, as well as several recent representative paper works. It aims to figure out the influence of deep learning techniques on latest VR/AR research. Meanwhile, new issues have popped up with the development of VR and AR technology, such as privacy and computation efficiency. This paper draws attention to such newly produced topics as well. In addition, this paper also investigates on the effect of latest VR and AR techniques on people, such as level of teamwork in collaborative tasks, assistance and treatment to patients and the disabled, etc.

In this paper, a solenoid based linearly movable armature system is designed using robust control theory in order to improve the performance of the system. Reference track method is the best performance analysis for position control systems. Among the robust controllers, H infinity mixed-sensitivity and Mixed H 2 /H∞ with Regional Pole Placement Controllers are used to improve the performance of the system. Comparison of the proposed controllers for tracking a reference displacement signals (step and sine wave) and a promising simulation result have been obtained.

In this work, the Pumped Storage Unit (PSU) is proposed to be integrated with wind-thermal generation system owned by a company whose aim is to maximize its profit through optimal self-scheduling of its units by finding the best bidding strategy in day-ahead energy market. The mathematical formulation of the scenario based unit-commitment and coordinated trading problem is formulated as a stochastic mixed integer linear program. The formulation takes into account several uncertain parameters; such as the wind power generation, energy market prices, and imbalances up/down prices. The expected total profit obtained from energy trading with and without coordinating pumped storage system (PSS) with thermal-wind generation system were compared, and a significant improvement in profit resulted from coordination was observed. Furthermore, coordination between PSS and wind-thermal generation improve the conditional value at risk (CVaR) which monitors the biding risk level.

The numerical simulation of entropy generation at mixed natural free and forced convection flow in a square lid-driven cavity filled with an eletrically conducting binary fluids saturated porous media in the presence of a magnetic field is performed in this investigation. Both the top and bottom horizontal walls of the cavity are kept at constant and different temperatures while the left and right vertical walls are adiabatic and insulated. The magnetic field is applied in normal direction to the cavity. The Darcy model, including Brinkman term relative to viscous effects and Forchheimer term due to inertial forces, is used for the momentum equations, and the SIMPLER algorithm, based on the control volume finite-element method approach is used to solve the pressure –velocity coupling. The flow pattern and the heat transfer characteristics inside the cavity are presented in the form of isotherms, streamlines and isentropic lines and average Nusselt number trend. The entropy generation rate is determined for various values of Darcy number (10^-3 ≤ Da ≤ 1) and for a range of Hartmann number (0 ≤ Ha ≤ 10²). This study is limited to Pr = 7 which corresponds to water. It is observed that entropy generation is very affected by the variations of dimensionless control parameters considered.

The 21^st century has witnessed precipitous changes spanning from the way of life to the technologies that emerged. We have entered a nascent paradigm shift (industry 4.0) where science fictions have become science facts, and technology fusion is the main driver. Thus, ensuring that any advancement in technology reach and benefit all is the ideal opportunity for everyone. In this study, disruptive technologies of industry 4.0 was explored and quantified in terms of the number of their appearances in published literature. The study aimed at identifying industry 4.0 key technologies which have been ill-defined by previous researchers and to enumerate the required skills of industry 4.0. Comprehensive literature survey covering the field of engineering, production, and management was done from multidisciplinary databases: Google scholar, ScienceDirect, Scopus, Sage, Taylor & Francis and Emerald insight. Results of the electronic survey showed that 35 disruptive technologies were quantified and 13 key technologies: Internet of things, Big data, 3D printing, Cloud computing, Autonomous robots, Virtual and Augmented reality, Cyber physical system, Artificial intelligence, Smart sensors, Simulation, Nanotechnology, Drones and Biotechnology were identified. Both technical and personal skills to be imparted into the human workforce for industry 4.0 were reported. The study identified the need to investigate the capability and the readiness of developing countries in adapting industry 4.0 in terms of the changes in the education systems and industrial manufacturing settings. The study proposes the need to address integration of industry 4.0 concepts into the current education system.

E-commerce is a rapidly evolving global trend that is having a significant impact on consumer behavior and business strategies. Despite its growing impact, e-commerce adoption by Moroccan firms remains low and research on this topic in this context is scarce. This study aims to fill this gap by investigating the main determinants influencing e-commerce adoption by Moroccan firms. We use logit, probit, and conditional mixed process-probit models to identify the critical factors driving e-commerce adoption. Our results reveal five key findings. First, newer firms that are more open to innovation and change are more likely to adopt e-commerce. Second, firms with a higher proportion of highly educated employees are more likely to adopt e-commerce. Third, the digital skills of new employees do not directly influence the likelihood of e-commerce adoption. Fourth, being listed on digital platforms increases the likelihood of e-commerce adoption. Finally, there is a positive relationship between firms engaged in innovation activities and e-commerce adoption. These findings highlight the need for additional investment in promoting modern organizational practices, reskilling workers, and implementing advanced technologies to facilitate effective e-commerce integration among Moroccan SMEs. By addressing these challenges, Moroccan firms can harness the full potential of e-commerce and contribute to the country’s economic growth and digital transformation.

Due to the unanticipated, forced migration of classroom activities to a fully remote format because of the coronavirus pandemic, there is a critical need for progress in the online education system. Not only that, but online education is the way of the future, and its infrastructure must be enhanced for teaching and learning to be effective. Engaging the students and enhancing their focus is one of the major concerns in the current video calling-based system. In this research, we propose a VR and AR-based virtual classroom environment system called "Edu VR" which encourages students to learn with a high level of involvement and attentiveness. We have divided the system into 2 distinct categories. one amongst which incorporates the virtual reality classroom, wherever the students can have a similar feel of actual school with peer-to-peer-based interactions and student-to-teacher interactions with Unity3D. We are able to conjointly deploy AR models with Vuforia, which permits the teachers to take classes more efficiently with student’s engagement. The other category involves the AI-based classroom assessment system, which enables teachers to produce assessments, which in turn are proctored by Artificial Intelligence. The results are automatically sent to the student within a short period, with the assistance of text similarity analysis for evaluating the answer scripts with Machine learning. This approach solves the drawbacks of video call-based systems with enhanced focus and engagement.

In recent years information and communication technologies (ICT) play a significant role in all aspects of modern society and impact socioeconomic development in sectors as education, administration, business, medical care and agriculture. The benefits of such technologies in agriculture can be appreciated only if farmers use them. In order to predict and evaluate the adoption of these new technological tools, the technology acceptance model (TAM) can be a valid aid. The paper measures the potential acceptance of an e-learning tool designed for EU farmers and agricultural entrepreneurs. Starting from a literature review of the technology acceptance model, by analyzing the most commonly used external variables in the fields of e-learning, Agriculture, and Virtual reality, the analysis shows that computer self-efficacy, individual innovativeness, computer anxiety, perceived enjoyment, social norm, content and system quality, experience and facilitating conditions are the most common determinants addressing technology acceptance. Furthermore, findings evidenced that the external variables have a different impact on the two main beliefs of the TAM Model, Perceived Usefulness (PU) and Perceived Ease of Use (PEOU). This study is expected to bring theoretical support for academics when determining the variables to be included in TAM extensions.

When phenomena in quantum mechanics are interpreted from the perspective of bio-psychology, wave function collapse from several to a single eigenstate must be plausibly explained. Quantum mechanics requires a context, yet the context of an observer is rarely considered. On the other hand, in bio-psychology, the observer context is examined to explain superposition and collapse by different mental functions used in everyday life. Three mental functions are described, one of which is responsible for observation, and the others for conservation and treatment of information in mental representation. Whereas observation produces information with certainty, the subsequent processes result in uncertain potentiality. In order to encompass uncertainty, multiple possibilities are simultaneously considered in mental superposition, one of which should represent the unknown future outcome. During observation, all suggested potentialities necessarily collapse to one real outcome. The collapse of superposition does not occur in observable physical reality, but in its mental representation. Some physical principles—such as superposition, infinity and nothingness before the Big Bang—are pure phenomena of mental representation, which will always remain unverifiable by observation. This argument proves that mental representation brought about by the observer context participates in the production of mental models for the best approximation of physical reality.

The aim of the study is to assess enjoyment and intensity of physical exercise while practicing physical activity (PA) in immersive virtual reality (IVR) using innovative training devices (omni-directional Omni treadmill and Icaros Pro flight simulator). The study also contains the results of subjective research on the usefulness of such a form of PA in the opinion of users. In total, 61 adults (10 women and 50 men) took part in the study. To assess the enjoyment level (EL) Interest/Enjoyment subscale of Intrinsic Motivation Inventory (IMI) was used. Exercise intensity was assessed during 10-minute sessions of active video games (AVGs) in IVR based on heart rate (HR). The average enjoyment level during physical exercise in IVR on the tested training devices was relatively high (Omni 5.74 points, Icaros 5.60 points). In the opinion of the majority of participants, AVGs on IVR training devices constitute a sufficiently useful form of movement to meet the needs of PA practiced in free time, and they can even replace some of the classic forms of movement. Intensity of PA during games on training devices was at the level recommended for health benefits for 92% (Omni) and 84% (Icaros Pro) of its duration. Based on the conducted research, it can be assumed that AVGs in IVR using a multi-directional treadmill and a flight simulator can be an effective tool for increasing participation in health-oriented PA.

Low Power Wide Area Networks (LPWAN) enable a growing number of Internet-of-Things (IoT) applications with large geographical coverage, low bit-rate, and long lifetime requirements. LoRa (Long Range) is a well-known LPWAN technology that uses a proprietary Chirp Spread Spectrum (CSS) physical layer, while the upper layers are defined by an open standard - LoRaWAN. In this paper, we propose a simple yet effective method to improve the Quality-of-Service (QoS) of LoRa networks by fine-tuning specific radio parameters. Through a Mixed Integer Linear Programming (MILP) problem formulation, we find optimal settings for the Spreading Factor (SF) and Carrier Frequency (CF) radio parameters, considering the network traffic specifications as a whole, to improve the Data Extraction Rate (DER) and to reduce the packet collision rate and the energy consumption in LoRa networks. The effectiveness of the optimization procedure is demonstrated by simulations, using LoRaSim for different network scales. In relation to the traditional LoRa radio parameter assignment policies, our solution leads to an average increase of 6% in DER, and a number of collisions 13 times smaller. In comparison to networks with dynamic radio parameter assignment policies, there is an increase of 5%, 2.8%, and 2% of DER, and a number of collisions 11, 7.8 and 2.5 times smaller than equal-distribution, Tiurlikova's (SoTa), and random distribution, respectively. Regarding the network energy consumption metric, the proposed optimization obtained an average consumption similar to Tiurlikova's, and 2.8 times lower than the equal-distribution and random dynamic allocation policies. Furthermore, we approach the practical aspects of how to implement and integrate the optimization mechanism proposed in LoRa, guaranteeing backward compatibility with the standard protocol.

Aphasia is one of the most socially disabling post-stroke deficits. Although traditional therapies have been shown to induce adequate clinical improvement, aphasic symptoms often persist. Therefore, new rehabilitation techniques which act as a substitute or as an adjunct to traditional approaches are urgently needed. The present review provides an overview of the efficacy and safety of the most innovative approaches which have been proposed over the last twenty years. First, we examined the effectiveness of the pharmacological approach, principally used as an adjunct to language therapy, reporting the mechanism of action of each single drug for the recovery of aphasia. Results are conflicting but promising. Secondly, we discussed the application of Virtual Reality (VR) which has been proved to be useful since it potentiates the ecological validity of the language therapy by using virtual contexts which simulate real-life everyday contexts. Finally, we focused on the use of Transcranial Direct Current Stimulation (tDCS), both discussing its applications at the cortical level and highlighting a new perspective, which considers the possibility to extend the use of tDCS over the motor regions. Although the review revels an extraordinary variability among the different studies, substantial agreement has been reached on some general principles, such as the necessity to consider tDCS only as an adjunct to traditional language therapy.

Mixed reality technology is being increasingly used in cultural heritage attractions to enhance visitors’ experience. However, how the characteristics of mixed reality affect satisfaction and brand loyalty has not been explored in previous research. The purpose of this study is to identify factors affecting satisfaction with mixed reality experiences at cultural and artistic visitor attractions and their influence on brand loyalty, which is connected with management performance. We propose a theoretical model based on brand equity theory in the context of mixed reality experience. Survey data were gathered from 251 respondents visiting a cultural and artistic visitor attraction in Seoul, Korea using a stratified sampling method. PLS-SEM was employed for the data analysis. The results suggest that the characteristics of mixed reality (interactivity, vividness) not only influence the affective aspects (perceived immersion, perceived enjoyment) of visitors’ experience, but also positively affect brand awareness, brand association, and brand loyalty.

The commercial popularity of Virtual Reality attracted educators’ interest and brought new opportunities to the educational landscape. At the same time, Learning Analytics emerged with the promise to revolutionise the traditional practices by introducing ways to systematically assess and improve the effectiveness of instruction. However, the collection of ‘big’ educational data is mostly associated with web-based platforms as they offer direct access to learners’ activities with minimal effort. On the antipode, the nature of VR limits the opportunities for such data collection. Hence, in the context of this work, we present a four-dimensional theoretical framework, that accounts the information that can be gathered from VR-supported instruction, and propose a set of structural elements which can be utilised for the development of a Learning Analytics prototype system. The outcomes of this work are expected to support practitioners to maximise the potential of their interventions and provide inspiration for new ones.

Multidisciplinary neurotechnology holds the promise of understanding and non-invasively treating neurodegenerative diseases. In this preclinical trial on Parkinson's disease (PD), we combined neuroscience together with the nascent field of medical virtual reality and generated several important observations. First, we established the Oculus Rift virtual reality system as a potent measurement device for parkinsonian involuntary hand tremors (IHT). Interestingly, we determined changes in rotation were the most sensitive marker of PD IHT. Secondly, we determined parkinsonian tremors can be abolished in VR with algorithms that remove tremors from patients' digital hands. We also found that PD patients were interested in and were readily able to use VR hardware and software. Together these data suggest PD patients can enter VR and be asymptotic of PD IHT. Importantly, VR is an open-medium where patients can perform actions, activities, and functions that positively impact their real lives - for instance, one can sign tax return documents in VR and have them printed on real paper or directly e-sign via internet to government tax agencies. Lastly, we generated a technical framework wherein movements in the real world can be measured side-by-side with those in virtual reality. With this framework, we observed anecdotal evidence of parkinsonian tremors being reduced in real life when our algorithms abolished digital hand tremors in VR.

At present European buildings typically consume two to five times more energy than predicted at the design stage. An important cause of this performance gap is the discrepancies between the design specification and the As-Built condition. Such discrepancies are mainly due to the gaps in knowhow between design, production and construction professionals. Design is more and more contained into a virtual environment and loses touch with the physical production and construction sites. As the construction sector enters the Industry 4.0 era, Building Information Modelling (BIM) based Mixed Reality can intertwine virtual and real worlds to bridge the knowhow gaps.

Introduced in 2009, Bitcoin has demonstrated a huge potential as the world’s first digital currency and has been widely used as a financial investment. Our research aims to uncover the relationship between Bitcoin prices and people’s sentiments about Bitcoin on social media. Among various social media platforms, micro-blogging is one of the most popular. Millions of people use micro-blogging platforms to exchange ideas, broadcast views, and to provide opinions on different topics related to politics, culture, science, and technology. This makes them a potentially rich source of data for sentiment analysis. Therefore we chose one of the busiest micro-blogging platforms, Twitter, to perform sentiment analysis on Bitcoin. We used ELMo embedding model to convert Bitcoin-related tweets into a vector form and SVM classifier to divide the tweets into three sentiment categories - positive, negative, and neutral. We then used the sentiment data to find its relation with Bitcoin price fluctuation using the linear mixed model.

The synthesis and structure of the 4,4′-dipyridyl N,N′-donor ligand with a central thiazolo[5,4-d]thiazole (tztz) unit, named Dptztz is presented. With the linker Dptztz and isophthalate (benzene-1,3-dicarboxylate, 1,3-BDC²⁻) the mixed-linker, two-dimensional coordination network [Zn(1,3-BDC)Dptztz]·DMF could be obtained (DMF = dimethylformamide), which belongs to the class of coordination polymers with interdigitated structures (CIDs). The incorporated DMF solvent molecules can be removed through solvent exchange and evacuation such that the supramolecular 3D packing of the 2D networks retains porosity for CO₂ adsorption in activated [Zn(1,3-BDC)Dptztz]. The first sorption study of a tztz-functionalized porous metal-organic framework material yields a BET surface of 417 m²/g from CO₂ adsorption. The heat of adsorption for CO₂ exhibits a relative maximum with 27.7 kJ/mol at adsorbed CO₂ of about 4 cm³/g STP which is interpreted as a gate-opening effect.

Keeping in mind the increasing trend and need for serious games in science education, we have done a systematic literature review. These papers show the trends and patterns of research carried out in this field from the year 2011 to 2020. Specifically, we investigated country-wise concentration and the most common evaluation methods. Literature is reviewed from IEEEexplore, Springer, and Scopus. Moreover, we discussed the role of Augmented Reality(AR) games in teaching physics. Lastly, we have discussed the positive and negative aspects of serious games in science education in particular, and the trend of using serious games in the past decade in education in general.

Technology can be seen everywhere and has been integrated into our lives.We are always using technology and enjoying the convenience brought by technology. However, physical retailers and e-commerce companies are also gradually adopting advanced technologies. Technology improves the purchasing environment and purchasing experience. Virtual reality and augmented reality have been hotly discussed in recent years. Technology, although virtual reality and augmented reality technology have not yet matured, it can be said that they will in the future It has great development potential. Virtual reality and augmented reality are also beginning to sprout in the retail industry. However, research on the acceptance of the use of virtual reality and augmented reality in the apparel shopping process is still lacking because This study explores how usefulness, ease of use, hedonicity, customer experience, customer engagement and satisfaction. To influence customer loyalty, this study adopted questionnaire survey and convenience sampling methods, and collected a total of 308 valid questionnaires. The analysis method used confirmatory factor analysis and structural equation model to verify the research hypothesis relationship. The results of this study found. Hedonic has a significant impact on customer loyalty, while usefulness, ease of use, customer experience, customer engagement and satisfaction Satisfaction does not have a significant impact on customer loyalty. This study explains the academic contribution of the research results. The practical implications in marketing are put forward, and specific suggestions and directions for future research are given.

The study was conducted in the potential mixed farming areas of Bale highland to estimate livestock methane emissions. Using multi-stage purposive sampling, 156 households of the three wealth groups were selected based on their livelihood assets as described under methodology. Structured questionnaires, focus group discussions, key informants interview and field visits were the employed methods during the study. Feed nutrient balance was estimated based on the demand and supply while the livestock methane emissions were estimated according to the IPCC guidelines. Descriptive statistics and one-way ANOVA tests were used to analyze the data. Cattle were the dominant (84.25%) livestock owned by the households. The estimated enteric CH4 emission rate from mature cattle, growing cattle, sheep >1 year, sheep ≤ 1 year, horse and donkey were significantly (P<0.001) higher for the better wealth group while mature cattle (69.78%) shared the highest rate. Though, higher emission rates credited to the large number of animals in the area, cattle stay crucial to the livelihoods of the households, beside the major sources of CH4. In conclusion, the estimated CH4 emissions should be focus areas of interventions. Therefore, proper husbandry and quality feed supply and promotion of farm level livestock technologies should be practiced wisely to increase productivity and protect the environment from emissions of the livestock sector.

Refinery planning optimization is a challenging problem as regards handling the nonconvex bilinearity mainly due to pooling operations in processes such as crude oil distillation and product blending. This work investigates the performance of several representative piecewise-linear (or piecewise-affine) relaxation schemes (referred to as McCormick, bm, nf5, nf6t, and de (which is a new approach proposed based on eigenvector decomposition) that mainly give rise to mixed-integer optimization programs to convexify a bilinear term using predetermined univariate partitioning for instances of uniform and non-uniform partition sizes. Computational results show that applying these schemes give improved relaxation tightness than only applying convex and concave envelopes as estimators. Uniform partition sizes typically perform better in terms of relaxation solution quality and convergence behavior. It is also seen that there is a limit on the number of partitions that contributes to relaxation tightness, which does not necessarily correspond to a larger number of partitions, while a direct relation between relaxation size and tightness does not always hold for non-uniform partition sizes.

Bacterial Calcium-carbonate Precipitation (BCP) has been studied for multiple applications such as remediation, consolidation and cementation. Isolation and screening of strong calcifying bacteria is the main task of BCP-technique. In this paper we studied CaCO₃ precipitation by different bacteria isolated from a rhizospheric soil in both solid and liquid media. It has been found, through culture-depending studies, that bacteria belonging to Actinobacteria, Gammaproteobacteria and Alphaproteobacteria are the dominant bacteria involved in CaCO₃ precipitation in this environment. Pure and mixed cultures of selected strains were applied for sand biocementation experiments. Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDS) analyses of the biotreated samples revealed the biological nature of the cementation and the effectiveness of the biodeposition treatment by mixed cultures. X-ray diffraction (XRD) analysis confirmed that all the calcifying strains selected for sand biocementation precipitated CaCO₃, mostly in the form of calcite. In this study Biolog® Eco-plate is evaluated as a useful method for a more targeted choice of the sampling site with the purpose of obtaining interesting candidates for BCP applications. Furthermore, ImageJ software was investigated, for the first time to our knowledge, as a potential method to screen high CaCO₃ producer strains.

We present a generalized state-space model formulation particularly motivated by an online scheduling perspective. Through these proposed generalizations, we enable a natural way to handle routinely encountered disturbances and a rich set of corresponding counter-decisions. Thereby, greatly simplifying and extending the possible application of mathematical programming based online scheduling solutions to diverse application settings.

Meloidogyne javanica causing root-knot nematode in soybean is an important problem in soybean areas, leading to several yield losses. Some accessions have been identified carrying resistance loci to this nematode specie. In this study, a set of 317 soybean accessions were characterized for resistance to M. javanica. Genome-wide association study (GWAS) was performed using SNPs from genotyping-by-sequencing (GBS), and a region of 29.2 Kbp on chromosome 13 was identified. The haplotype analysis showed that SNPs were able to discriminate susceptible and resistant accessions, leading to 25 accessions sharing the resistance locus. Furthermore, 5 accessions may be new M. javanica resistance sources. The screening of the SNPs in the USDA soybean germplasm showed that several accessions previous reported as resistance to other nematodes also showed the resistance haplotype on chromosome 13. High levels of concordance among the phenotypes of Brazilian cultivars and the SNPs in chromosome 13 were observed. A in silico analysis of the mapped region on soybean genome revealed a presence of 5 genes with structural similarity with major resistance genes. The expression levels of the candidate genes in the interval demonstrated a potential pseudogene, and other two model genes up-regulated in the resistance source after pathogen infection. The SNPs associated to the region conferring resistance is a important tool for introgression of the resistance by marker-assisted selection in soybean breeding programs.

Due to their strong immersion and real-time interactivity, helmet-mounted VR devices are becoming increasingly popular. Based on these devices, an immersive virtual geographic environment (VGE) provides a promising method for research into crowd behavior in an emergency. However, the current cheaper helmet-mounted VR devices are not popular enough and will continue to coexist with PC-based systems for a long time. Therefore, a heterogeneous distributed virtual geographic environment (HDVGE) could be a feasible solution to solve the heterogeneous problems caused by various types of clients, and support implementation of virtual crowd evacuation experiments, with large numbers of concurrent participants. In this study, we developed an HDVGE framework and put forward a set of design principles to define the similarities between the real world and the VGE. We discussed the HDVGE architecture and proposed an abstract interaction layer, a protocol-based interaction algorithm and an adjusted dead reckoning algorithm to solve the heterogeneous distributed problems. We then implemented an HDVGE prototype system focusing on subway fire evacuation experiments. Two types of clients are considered in the system, PC and all-in-one VR. Finally, we evaluated the performances of the prototype system and the key algorithms. The results showed that in a low-latency LAN environment, the prototype system can smoothly support 90 concurrent users consisting of PC and all-in-one VR clients. HDVGE could serve as a new means of obtaining observational data about individual and group behavior in support of human geography research.

In this paper we study the class of mixed-index time fractional differential equations in which different components of the problem have different time fractional derivatives on the left hand side. We prove a theorem on the solution of the linear system of equations, which collapses to the well-known Mittag-Leffler solution in the case the indices are the same, and also generalises the solution of the so-called linear sequential class of time fractional problems. We also investigate the asymptotic stability properties of this class of problems using Laplace transforms and show how Laplace transforms can be used to write solutions as linear combinations of generalisedMittag-Leffler functions in some cases. Finally we illustrate our results with some numerical simulations.

Recent digital transformations have significantly impacted the current society, economy, and culture. This includes adoption of rapidly emerging technologies, such as artificial intelligence (AI), immersive technology (e.g., virtual, augmented, mixed and extended reality (VR/AR/MR/XR)), cloud services, and internet of things, in our day-to-day life. `Metaverse’ has emerged as a technology that incorporates many of these transforming technologies to deliver personalised immersive experience related to specific application areas. A potential major beneficiary of Metaverse is the educational ecosystem, where highly immersive learning experiences can be delivered to students, catering to their personal learning needs and train them on life skills such as empathy, ethical qualities, and communication skills. The present-day Metaverse allows physical engagement, enabling users to utilise limb movements to interact with the presented materials. However, ethical concerns and technical limitations impede the widespread implementation of the Metaverse in the real-world. This paper provides a comprehensive survey of the existing literature covering the architecture, type and components of Metaverse, followed by practical aspects of metaverse implementation. The paper is concluded by discussing on the open challenges and issues along with their mitigation strategies and future research directions after the detailed usecase of Metaverse in Education.

Hand tracking enables controller-free interaction with virtual environments, which can, compared to traditional handheld controllers, make virtual reality (VR) experiences more natural and immersive. As naturalness hinges on both technological and user-based features, fine-tuning the former while assessing the latter can be used to increase usability. For a grab-and-place use case in immersive VR, we compared a prototype of a camera-based hand tracking interface (Leap Motion) with customized design elements to the standard Leap Motion application programming interface (API) and a traditional controller solution (Oculus Touch). Usability was tested in 32 young healthy participants, whose performance was analyzed in terms of accuracy, speed and errors as well as subjective experience. We found higher performance and overall usability as well as overall preference for the handheld controller compared to both controller-free solutions. While most measures did not differ between the two controller-free solutions, the modifications made to the Leap API to form our prototype led to a significant decrease in accidental drops. Our results do not support the assumption of higher naturalness for hand tracking but suggest design elements to improve the robustness of controller-free object interaction in a grab-and-place scenario.

In this work, an algorithm for the scheduling of household appliances to reduce the energy cost and the peak-power consumption is proposed. The system architecture of a home energy management system (HEMS) is presented to operate the appliances. The dynamics of thermal and non-thermal appliances is represented into state-space model to formulate the scheduling task into a mixed-integer-linear-programming (MILP) optimization problem. Model predictive control (MPC) strategy is used to operate the appliances in real-time. The HEMS schedules the appliances in a dynamic manner without any a priori knowledge of the load-consumption pattern. At the same time, HEMS responds to the real-time electricity market and the external environmental conditions (solar radiation, ambient temperature etc). Simulation results exhibit the benefits of proposed HEMS by showing the reduction of up to 47% in electricity cost and up to 48% in peak power consumption.

Insufficient mixing in large-scale bioreactors, provokes gradient zones of substrate, dissolved oxygen, pH and other parameters. E. coli responds to a high glucose, low oxygen feeding zone with the accumulation of mixed acid fermentation products, especially formate, but also with the synthesis of non-canonical amino acids, such as norvaline, norleucine and -methyl-norleucine. These amino acids can be mis-incorporated into recombinant products, which causes a problem for pharmaceutical production whose solution is not trivial. While these effects can also be observed in scale down bioreactor systems, these are challenging to operate. Especially the high-throughput screening of clone libraries is not easy, as fed-batch cultivations would need to be controlled via repeated glucose pulses with simultaneous oxygen limitation, as has been demonstrated in well controlled robotic systems. Here we show that not only glucose pulses in combination with oxygen limitation can provoke the synthesis of these non-canonical branched-chain amino acids, but also that pyruvate pulses produce the same effect. Therefore we combined the enzyme based glucose delivery method Enbase® in a PALL24 mini-bioreactor system and combined repeated pyruvate pulses with simultaneous reduction of the aeration rate. These cultivation conditions, produced an increase in the non-canonical branched chain amino acids norvaline and norleucine in both the intracellular soluble protein and inclusion body fractions with mini-proinsulin as an example product, and this effect was verified in a 15 L stirred tank bioreactor. To our opinion this cultivation strategy is easy to apply for the screening of strain libraries under standard laboratory conditions if no complex robotic and well controlled parallel cultivation devices are available.

Virtual reality (VR) technology gains theoretical support from rehabilitation and pedagogical theories and offers a variety of capabilities in educational and interventional contexts with affordable products. VR is attracting increasing attention in the medical and healthcare industry as it provides fully interactive three-dimensional simulations of real-world settings and social situations, which are particularly suitable for cognitive and performance training including social and interaction skills. The worldwide rising trend in the prevalence of autism spectrum disorder calls for innovative and efficacious techniques for assessment and treatment. The article offers a summary of current perspectives and evidence-based applications of VR technology as an educational and intervention tool for individuals with autism spectrum disorder, with a primary focus on social communication including social functioning, emotion recognition, and speech and language. Technology- and design-related limitations as well as the disputes over the application of virtual reality to autism research and therapy are discussed and future directions of this emerging field are highlighted with regards to application expansion and improvement, technology enhancement, and the development of brain-based research and theoretical models.

Despite recent developments in monitoring and visualizing construction progress, the data exchange between construction jobsite and office lacks automation and real-time recording. To address this issue, a near real-time construction work inspection system called iVR is proposed; this system integrates 3D scanning, extended reality, and visual programming to visualize interactive onsite inspection for indoor activities and provide numeric data. iVR comprises five modules: iVR-location finder (finding laser scanner located in the construction site) iVR-scan (capture point cloud data of jobsite indoor activity), iVR-prepare (processes and convert 3D scan data into a 3D model), iVR-inspect (conduct immersive visual reality inspection in construction office), and iVR-feedback (visualize inspection feedback from jobsite using augmented reality). An experimental lab test is conducted to validate the applicability of iVR process; it successfully exchanges required information between construction jobsite and office in a specific time. This system is expected to assist Engineers and workers in quality assessment, progress assessments, and decision-making which can realize a productive and practical communication platform, unlike conventional monitoring or data capturing, processing, and storage methods, which involve storage, compatibility, and time-consumption issues.

Molecular visualisation is fundamental in the current scientific literature, textbooks and dissemination materials, forming an essential support for presenting results, reasoning on and formulating hypotheses related to molecular structure. Visual exploration has become easily accessible on a broad variety of platforms thanks to advanced software tools that render a great service to the scientific community. These tools are often developed across disciplines bridging computer science, biology and chemistry. Here we first describe a few Swiss Army knives geared towards protein visualisation for everyday use with an existing large user base, then focus on more specialised tools for peculiar needs that are not yet as broadly known. Our selection is by no means exhaustive, but reflects a diverse snapshot of scenarios that we consider informative for the reader. We end with an account of future trends and perspectives.

In this contribution, a method based on a solid solution theory of clathrate hydrate for multiple cage occupancy, host lattice relaxation and guest-guest interactions has been presented to estimate hydrate formation conditions of binary and ternary gas mixtures. We have performed molecular modeling of structure, guest distribution, and hydrate formation conditions for the CO₂ + CH₄, and CO₂ + CH₄ + N₂ gas hydrates. In all considered systems with and without N₂, at high and medium content of CO₂ in the gas phase we have found that CO₂ is more favorable to occupy clathrate hydrate cavities than CH₄ or N₂. Addition of N₂ to the gas phase increases ratio concentration CO₂ in compressing with concentration CH₄ in clathrate hydrates and makes gas replacement more effective. The mole fractions of CO₂ in CO₂ + CH₄ + N₂ gas hydrate rapidly increases with the growth of its content in the gas phase. And the formation pressure of CO₂ + CH₄ + N₂ gas hydrate rises in comparison with the formation pressure of CO₂ + CH₄ gas hydrate. Obtained results agree with the known experimental data for simple CH₄, CO₂ gas hydrates and mixed CO₂ + CH₄ gas hydrate.

The concept of using eye-tracking in virtual reality for education has been researched in various fields over the past years. With this review, we aim to discuss the recent advancements and applications in this area, explain the technological aspects, highlight the advantages of this approach and inspire interest in the field. Eye-tracking has already been used in science for many decades and now has been substantially reinforced by the addition of virtual and augmented reality technologies. The first part of the review is a general overview of eye-tracking concepts and its applications. In the second part, the focus shifted towards application of eye-tracking in virtual reality. The third part is the description of the recently emerged concept of eye-tracking in virtual reality when applied to education and studying, which has not been thoroughly described before. We describe the main findings, technological aspects and advantages of this approach.

How does the world around us work and what is real? This question has preoccupied humanity since its beginnings. From the 16th century onwards, it has been periodically necessary to revise the prevailing worldview. But things became very strange at the beginning of the 20th century with the advent of relativity theory and quantum physics. The current focus is on the role of information, there being a debate about whether this is ontological or epistemological. A theory has recently been formulated in which spacetime and gravity emerges from microscopic quantum information, more specifically from quantum entanglement via entanglement entropy. A latest theory describes the emergence of reality itself through first-person perspective experiences and algorithmic information theory. In quantum physics, perception and observation play a central role. Perception, interaction with the environment, requires an exchange of information. Via biochemical projection, information is given an interpretation that is necessary to make life and consciousness possible. The world around us is not at all what it seems.

In this study, 6 residents of a long-term care facility were asked to try on Virtual Reality glasses and report their first experiences with Virtual Reality. The results show that Virtual Reality is of great interest to elderly residents of in-patient long-term care facilities. The wearing period was longer than expected and no symptoms of cyber sickness occurred. For the residents it was exciting to explore the virtual environments. Austrian destinations, nature scenes in the mountains and forests but also trips to the zoo, the museum, in churches or even densely populated areas like shopping streets or train stations would be places for the residents, they would like to explore virtually. Far-off destinations such as Rio de Janeiro or the Caribbean are more of an exception. Biographically relevant places such as the parental home or the location of their wedding were not named. Concerning the usability, an adjustment of the VR glasses is necessary for a longer-term use in any case.

First of all the paper presents a solid solution of piezoelectric ceramic that was synthesized according to the general formula Pb(1-x)Srx(Ti0.48Zr0.52)(1-y)NbyO3 with x = 0.05 and y = 0.02, using wet ceramic processing technology and using an oxide mix as prime material. The effects of dopants (Sr2+ and Nb5+) on phase constitution, on microstructure and on the dielectric and piezoelectric properties were determinate. The Zr/Ti ratio was chosen near the morphotropic phase boundary of the PZT system in studied composition. The XRD data revealed that the PZT doped composition had tetragonal perovskite structure. Secondly the paper presents the design of the novel piezo-motor based on a surface wave which translates the linear extension of different piezoelectric segments of a piezoelectric cylinder into a rotational bending movement. This rotational bending of the piezoelectric cylinder is then transformed into a continuous rotation of the rotor through a calculated contact. The design of the motor takes advantage of the high piezoelectric constants of the developed material in an optimal way in order to increase the energetic efficiency. A brief mathematical model of electromechanical answer of piezoelectric materials is presented as it was used in the modeling of the material during the numerical simulations.

The urgent need to improve performance in the construction industry has led to the adoption of many innovative technologies. 3D laser scanners are amongst the leading technologies being used to capture and process assets or construction project data for use in various applications. Due to its nascent nature, many questions are still unanswered about 3D laser scanning, which in turn contribute to the slow adaptation of the technology. Some of these include the role of 3D laser scanners in capturing and processing raw construction project data. How accurate is the 3D laser scanner or point cloud data? How does laser scanning fit with other wider emerging technologies such as Building Information Modelling (BIM)? This study adopts a proof-of-concept approach, which in addition to answering the afore-mentioned questions, illustrates the application of the technology in practice. The study finds that the quality of the data, commonly referred to as point cloud data is still a major issue as it depends on the distance between the target object and 3D laser scanner’s station. Additionally, the quality of the data is still very dependent on data file sizes and the computational power of the processing machine. Lastly, the connection between laser scanning and BIM approaches is still weak as what can be done with a point cloud data model in a BIM environment is still very limited. The aforementioned findings reinforce existing views on the use of 3D laser scanners in capturing and processing construction project data.

Hepatitis-C is one of the most common viral diseases caused by hepatitis C virus (HCV). It is responsible for millions of deaths each year in the developing world. The common dissemination paths of HCV include the use of contaminated water and transfusion of infected blood. Control of this virus has become a challenge for scientists and health professionals due to its versatility and adaptability in different host environments. Along with other problems, lack of efficient diagnosis, quantification and genotyping of viral strains are the major hindrances in a management of this notorious epidemic. The knowledge of HCV genotype and an amount of virus in patient’s blood are pre-requisites to determine the duration and method of treatment. In this review, we discuss the implications of HCV molecular diagnostic methods and their clinical applications. We conclude that while, several commercial and home-brewed methods are available for this purpose, and there is a visible vacuum for cost effective, robust, sensitive assays that can detect multiple viral genotypes in a single reaction. We are of the view that the level of sensitivity offered by Reverse Transcriptase-Polymerase Chain Reaction (RT-PCR) technique is unequivocal as compared to other techniques. Therefore, researchers may explore further possibilities using this technique in the management of HCV.

Increasingly, genomics is being used for the prediction of specific traits and diseases (phenotypes) among humans. Wider availability of genomics data through multiple research projects (such as International HapMap Project1 and 1000 Genomes2) has been a catalyst in that direction. With the recent advances in machine learning and big data analysis, data computation resources and data models needed for genomics data analysis are readily available. However, the prediction of traits and diseases has its own challenges in terms of computational requirements and computational analysis, statistical analysis (example: confounding variables), and limited quality of data collection. Linear Mixed Models (LMM, a type of linear regression) is a common approach for Genome-wide Association Studies (GWAS) for the prediction of common traits among humans using genomics. This paper researches the existing LMM-based approaches for Genome-wide Association Studies (GWAS), describes the experiment performed on FaST-LMM approach from Microsoft Research, and then proposes an enhanced approach (called LMM-22) on how to address computational and statistical issues. LMM-22 focuses on the parallelization of LMM computations and execution of LMM-22 on General Purpose Graphics Processing Units (GPU) as against CPUs to accelerate the LMM approach for GWAS studies.

The UK Government is committed to reducing greenhouse gas (GHG) emissions by 80% by 2050. Buildings are responsible for 37% of the total GHG emissions in the UK and the need to reduce their emissions has resulted in more stringent building regulations in the recent past. The regulations, energy rating systems and voluntary guidelines — all are primarily aimed at reducing the need for heating and associated energy use by increasing insulation and air-tightness. However, future climates are projected to be warmer than the present day. Internal gains dominated non-domestic buildings will likely overheat, the adaptation to which will require energy-intensive cooling solutions, thus defeating the purpose of heating-focused regulations. This research investigated the effects of warming climate on overheating, and energy use and resulting emissions in representative urban office spaces in London in the present-day and future climates using hourly dynamic thermal simulations. Findings suggest that more airtight and highly—insulated office buildings designed for heating—dominated temperate UK climate will overheat in the 2050s. Heating demand reduces but electricity consumption increases by 121% when hybrid cooling is adopted to ameliorate overheating. Despite the rise, adopting a mixed-mode ventilation strategy was one of the ways of achieving overall energy efficiency while meeting benchmark overheating and carbon emissions target in present and future climatic contradictions. Current heating-focused legislations need to be urgently re-evaluated to account for the effects of climatic variability and overheating risks.

Scientific studies had shown that mixed forests of silver fir (Abies alba Mill.) and European beech (Fagus sylvatica L.) provide higher ecosystem services than monospecific forests. Mixed forests are known for their high resilience to climate change impacts and superior biodiversity compared to monospecific forests. In many countries, promotion of mixed forests in forest management is becoming a government policy since they can contribute to fulfill the Sustainable Development Goals set by the United Nation, respectively Goal 13 and 15. However, not much is known about public perceptions on mixed forests compared to monoculture forests. Our study on ecosystem services provided by mixed and monospecific forests in southwest Germany fill this gap. Based on a survey with 520 valid responses we analyzed people’s perception on 18 different supporting, cultural, regulating and provisioning ecosystem services measured by Likert scale. Stepwise regression analyses show relations between social profiles (gender, age, education, profession) and preferences on respondents’ perceptions. Our findings show that people perceive that mixed forests provide better cultural, regulating and supporting ecosystem services than monospecific forests of fir and beech whereas provisioning services were perceived as being equally or better provided by monospecific forests. Significant effects towards a positive perception on ecosystem services provided by mixed forests were mainly influenced by the perceived abundance of old trees, feeling of pleasantness in mixed forests, age, profession, and education. Our findings indicate that there is a high public support for the promotion of silver fir and beech mixed forests in Southwest Germany.

Type 2 diabetes mellitus (T2DM) and late-onset Alzheimer’s disease-dementia (LOAD) are increasing in global prevalence and current predictions indicate they will only increase over the coming decades. These increases may be a result of the concurrent increases of obesity and aging. T2DM is associated with cognitive impairments associated with metabolic factors and increases the cellular vulnerability to develop the age-related increased risk of LOAD. This review addresses possible mechanisms due to obesity, aging, multiple intersections between T2DM and LOAD and mechanisms for the continuum of progression. Multiple ultrastructural images in female diabetic db/db models are utilized to demonstrate marked cellular remodeling changes of mural and glia cells and provide for the discussion of functional changes in T2DM. Throughout this review multiple endeavors to demonstrate how T2DM increases the vulnerability of the brain’s neurovascular unit (NVU), neuroglia and neurons are presented. Five major intersecting links are considered: i. aging (chronic age-related diseases); ii. metabolic (hyperglycemia - advanced glycation end-products and its receptor (AGE/RAGE) interactions and hyperinsulinemia – insulin resistance (a linking linchpin); iii. oxidative stress (reactive oxygen-nitrogen species); iv. inflammation (peripheral macrophage and central brain microglia); v. vascular (macrovascular accelerated atherosclerosis - vascular stiffening and microvascular NVU/neuroglial remodeling) with resulting impaired cerebral blood flow.

A graphene-containing LDH was prepared by re-hydration of the oxides produced by the calcination of an organic LDH. While the memory effect is a widely recognized effect on oxides produced by inorganic LDHs, it is unprecedented from the calcination/re-hydration of organic ones. Different temperatures (400, 600 and 1100 °C) were tested, on the basis of thermogravimetric data. Water instead of a carbonate solution was used for the re-hydration, with CO₂ available from water itself and/or air to induce a slower process with an easier and better intercalation of the carbonaceous species within the layers. The samples were characterized by X-ray Powder Diffraction (XRPD), IR and Raman spectroscopy and scanning electron microscopy (SEM). XRPD indicate the presence of carbonate LDH mixed with a layered phase with a larger d-spacing. IR confirmed that the prevailing anion is carbonate, coming from the water used for the re-hydration and/or air. Raman data indicated the presence of low-ordered graphenic species moieties and SEM the absence of separated graphene of graphitic sheets, suggesting an intimate mixing of the carbonaceous phase with reconstructed LDH. Organic LDHs gave better memory effect after calcination at 400 °C. Conversely, the graphenic species are observed after rehydration of the sample calcined at 600 °C with a reduced memory effect, demonstrating the interference of the carbonaceous phase with LDH reconstruction and the bonding with LDH layers to form a graphene-LDH nanocomposite.

This paper is an interdisciplinary study of novel applications of techniques and tools of an area of brain science, known as Synesthesia (involving associations and/or confusion between distinct senses), to area of Computer Science known as Immersive Virtual Reality (VR), that makes the subject’s awareness of physical self be diminished by being surrounded in an engrossing artificial environment. Natural Synesthesia has for the last decade been an important emerging area in brain science but is present in only a small proportion of the population. For example a person with Natural Synesthesia, when viewing a grapheme, may perceive a color additionally to be associated to the grapheme. In contrast, Artificial synesthesia (also known as virtual synesthesia or synthetic synesthesia) has been defined as the sensory joining due a cross-modal mapping device, where information of one sense is accompanied by an induced perception in another sense. In particular, we propose use of a multimodal manner of displaying information in VR to increase and concentrate attention. Artificial Synesthesia to synthetically create induced associations between senses, allowing Artificial Synesthesia to be experienced by anyone using a VR system. The paper describes the enhancement of immersive VR by use of Artificial Synesthesia to improve the system’s performance at steering and directing the attention of the user. We describe techniques for an enhanced immersive VR that displays associations between a variety of senses: between colors and characters, also between colors and sounds, and between sounds and the position of tactile sensations. The sense association provided by Artificial Synesthesia allows the system to better capture the user’s attention and better direct that attention. A major application of our work in VR-induced Artificial Synesthesia is to provide an enhanced methodology for controlling the attention of the subject, and to improve the direction of attention of subjects undergoing guided imagery therapies for pain relief. Other potential high-impact applications include improved immersive VR, more programmable human/computer interfaces and other medical therapies.

With the recent developments in augmented reality (AR) technologies comes an increased interest in the use of smart glasses for hands-on training. Whether this interest is turned into market success or not depends at the least on whether the interaction with smart AR glasses satisfies users, an aspect of AR use that so far has received little attention. With this contribution, we seek to change this. The objective of the article, therefore, is to investigate user satisfaction in AR applied to three cases of practical use. User satisfaction of AR can be broken down into satisfaction with the interaction and satisfaction with the delivery device. A total of 142 participants from three different industrial sectors contributed to this study, namely, aeronautics, medicine, and astronautics. In our analysis, we investigated the influence of different factors, such as age, gender, level of education, level of Internet knowledge, and the roles of the participants in the different sectors. Even though users were not familiar with the smart glasses, results show that general computer knowledge has a positive effect on user satisfaction. Further analysis using two-factor interactions shows that there is no significant interaction between the different factors and user satisfaction. The results of the study affirm that the questionnaires developed for user satisfaction of smart glasses and the AR application performed well, but leave room for improvement.

The chemopreventive effects of various mixed cereal grain (MCG) samples on azoxymethane (AOM, 10 mg/kg) and dextran sulfate sodium (DSS, 2% w/v)-induced colorectal cancer (CRC) in C57BL/6J mice were studied. The main MCG preparation consisted of fermented brown rice (FBR), glutinous brown rice, glutinous Sorghum bicolor, glutinous Panicum miliaceum, Coix lacryma-jobi and black soybean at an appropriate mixing ratio. Other MCG preparations contained rice coated with 5% Phellinus linteus and 5% Curcuma longa (MGR-PC), or 10% Phellinus linteus (MCG-P), or 10% Curcuma longa (MCG-C). Consumption of dietary MCG-PC by CRC mice significantly increased colon length, decreased the ratio of colon weight to length, and reduced the number of colon tumors. Similar effects, although to a lower extent, were observed in CRC mice fed with MCG-P, followed by those fed with MCG-C, MCG, FBR or white rice (WR). MCG-PC significantly suppressed colonic neoplasia, and decreased the levels of various cytokines (tumor necrosis factor: Tnf, interleukin 1 beta: Il1b, interleukin 6: Il6, and interferon gamma: Ifng) in serum and colon tissue of the CRC mice. In addition, MCG-PC increased the mRNA expressions of tumor protein p53(Tp53) and cyclin-dependent kinase inhibitor 1A(Cdkn1a), activated pro-apoptotic caspase 3(Casp3), and reduced expression of both mRNA and protein of inducible inducible nitric oxide synthase 2 (Nos2), prostaglandin-endoperoxide synthase 2 (Ptgs2), and cyclin D1(Ccnd1) in colon tissue. These findings suggest that than compared with other cereal grain preparations, MCG-PC had a greater activity against AOM/DSS-induced CRC by reducing intestinal inflammation, and modulating the expression of certain carcinogenesis related factors (Nos2, Ptgs2, Tp53, Cdkn1a, Ccnd1 and Casp3) in colon tissue of CRC mice.

Over the last few decades there has been an exponential growth in IT, motivating IT professionals and scientists to explore new dimensions resulting in the advancement of artificial intelligence and its subcategories like computer vision, deep learning and augmented reality. AR is comparatively a new area which was initially explored for gaming but recently a lot of work has been done in education using AR. Most of this focuses on improving students understanding and motivation. Like any other project, the performance of an AR based project is determined by the customer satisfaction which is usually affected by the theory of triple constraints; cost, time and scope. many studies have shown that most of the projects are under development because they are unable to overcome these constraints and meet project objectives. We were unable to find any notable work done regarding project management for augmented reality systems and application. Therefore, in this paper, we propose a system for management of AR applications which mainly focuses on catering triple constraints to meet desired objectives. Each variable is further divided into subprocesses and by following these processes successful completion of the project can be achieved.

In this work, some numerical radius inequalities based on the recent Dragomir extension of Furuta's inequality are obtained. Some particular cases are also provided.

Genomic selection (GS) can accelerate variety improvement when training set (TS) size, and its relationship with the breeding set (BS) are optimized for prediction accuracies (PA) of genomic prediction (GP) models. Sixteen GP algorithms were run on phenotypic best linear unbiased predictors (BLUPs) and estimators (BLUEs) of resistance to both fall armyworm (FAW) and maize weevil (MW) in a tropical maize panel. For MW resistance, 37% of the panel was the TS, and BS was the remainder whilst for FAW, random-based training sets (RBTS) and pedigree-based training sets (PBTS) were designed. PAs achieved with BLUPs varied from 0.66 to 0.82 for MW resistance traits, and, for FAW resistance, 0.694 to 0.714 for RBTS of 37%, and 0.843 to 0.844 for RBTS of 85%, and, these were at least two-fold those from BLUEs. For PBTS, FAW resistance PAs were generally higher than those for RBTS, except for one dataset. GP models generally showed similar PAs across individual traits whilst the TS designation was determinant since a positive correlation (R=0.92***) between TS size and PAs was observed for RBTS and, for the PBTS, it was negative (R=0.44**). This study pioneers the use of GS for maize resistance to insect pests in sub-Saharan Africa.

The aim of this study is to introduce a novel method which can separate sand or gravel dominated bed load transport in rivers with mixed-size bed material. In engineering practice, the Shields-Parker diagram could be used for such purposes, however, the method has certain applicability limits, due to the fact that it is based on uniform bed material and provides information rather on river-scale, instead of reach or local scale. When dealing with large rivers with complex hydrodynamics and morphodynamics the bed load transport modes can also indicate strong variation even locally, which requires a more suitable approach to estimate the locally unique behavior of the sediment transport. Here, we suggest that the decision criteria utilizes the shear Reynolds number (Re*). The method was verified against field and laboratory measurement data, both performed at non-uniform bed material compositions. The comparative assessment of the results show that the shear Reynolds number based method operates more reliably than the Shields-Parker diagram and it is expected to predict the sand or gravel transport domination with a < 5% uncertainty. The introduced results can greatly contribute to the improvement of numerical sediment transport modeling as well as to the field implementation of bed load transport measurements.

This paper shares our work in developing and implementing an immersive gamification training platform for students who undergo manufacturing shopfloor training at the School of Engineering, Nanyang Polytechnic, Singapore. In this gamification training platform, we developed a virtual manufacturing shopfloor that is identical to the actual shopfloor located in the school. Students have the freedom to learn the manufacturing shopfloor operations and safety acts through the various game scenarios and training tasks which include workshop safety, CNC machine introduction, CNC machining dynamics, MES, etc. In addition, the assessment feature with immediate feedback were embedded within the gamification platform, which aim to help students to assess their level of understanding and help teachers to monitor the learning progress of their students. To investigate the impact of this gamification training platform on students’ learning outcome and motivation in manufacturing shopfloor technologies and safety acts, a pilot study was conducted in AY2018 semester 2 for a total 134 students from 4 classes of digital & precision engineering diploma. It is found that gamification can be integrated effectively into manufacturing education to motivate students and enhance their learning effectiveness. Based on the collected data from the technical quizzes and satisfactory survey, the results showed that the integration of gamification into the classroom learning not only added a stimulating and captivating game-like layer to the learning experience of the students, but also provided a safe environment for students to learn without fear of making errors. Challenges faced in implementing this gamification training platform will also be discussed in this paper.

This report is considered different aspects of the concept of the networked distributed engine control system (DECS) of future air vehicles. These aspects include the following: the structure of multiple networks similar to NATO Generic Vehicle Architecture (NGVA), the role of Artificial Intelligence (AI) in DECS, and the use Augmented Reality (AR) as Human-Machine Interface between AI and pilots. Deployment of AI solutions for monitoring equipment in on-board infrastructure can be provided on physical or virtual servers and in the clouds. In this case, it is possible to use various methods of alerting the pilot and ground personnel on the basis of AR. The use of AI allows covering an unlimited set of scenarios, to provide an assessment of the likelihood of equipment failure, classification alarm is normal, and recognition of the development of defects. To collect Big Data from sensors and the pre-processing of this data before a machine learning (ML) procedure it is proposed to form data sets with the help of the face-splitting matrix product. To decrease the time of reaction of Neural Networks it has been suggested the implementation of advanced tensor-matrix theory on the basis of penetrating face product of matrices. Other important results of the report are a possible version of the AR data format for DECS and a proposal about the use of non-orthogonal frequency discrete multiplexing (N-OFDM) signals to data transfer via fibre optics.

Museums increasingly recognize the need to address advances in digital culture which impact the expectations and needs of their audiences. Museum collections of real objects need to be presented both on their own premises and digitally online, especially as social media becomes more and more influential in people’s everyday lives. We investigate these challenges magnified by advances in digital and computational media and culture looking particularly at recent and relevant reports on changes in the ways museums interact with the public. We find that the Covid-19 pandemic has accelerated many of the changes driving museum transformation. We believe that museums must be more prepared than ever to adapt to unabated technological advances set in the midst of cultural and social revolution, now intrinsic to the digital landscape in which museums are inevitably connected and participating across the global digital ecosystem where they inevitably find themselves entrenched.

A custom-designed series of unsymmetrical spiroalkanedithiols having tailgroups comprised of a terminally fluorinated chain and a hydrocarbon chain of varying lengths were synthesized and used to prepare self-assembled monolayers (SAMs) on gold substrates. The specific structure of the adsorbates was of the form [CH₃(CH₂)_n][CF₃(CF₂)₇(CH₂)₈]C[CH₂SH]₂, where n = 7, 9, and 12 (designated as F8H10-C10, F8H10-C12, and F8H10-C18, respectively). The influence of the length of the hydrocarbon chain in the bidentate dithiol on the structure and interfacial properties of the monolayer was explored. A structurally analogous partially fluorinated monodentate alkanethiol and the corresponding normal alkanethiols were used to generate appropriate SAMs as reference systems. Ellipsometric thickness measurements showed an unexpectedly low film thickness for the SAMs derived from the bidentate adsorbates, possibly due to disruptions in interchain packing caused by the fluorocarbon chains (i.e., phase-incompatible fluorocarbon-hydrocarbon interactions), ultimately giving rise to loosely packed and disordered films. Analysis by X-ray photoelectron spectroscopy (XPS) were also consistent with a model in which the films were loosely packed; additionally, the XPS spectra confirmed the attachment of the sulfur headgroups of the bidentate adsorbates onto the gold substrates. Studies of the SAMs by polarization modulation-infrared reflection-adsorption spectroscopy (PM-IRRAS) suggested that as the length of the hydrocarbon chain in the adsorbates was extended, a more ordered surface was achieved by reducing the tilt of the fluorocarbon segment. The wettability data indicated that the adsorbates with longer alkyl chains were less wettable than those with shorter alkyl chains, likely due to an increase in interchain van der Waals forces in the former.

With the advancement in AR technology, more education-based applications are being developed using Augmented Reality, which has revolutionized the learning experience. However, in order to determine the application’s impact on student’s motivation, performance and their communication with the lecturer, various studies are conducted. These studies use one of the three research methodologies for data analysis and evaluation. In this systematic review, we have analyzed various research methodologies for system evaluation of the AR learning applications and recorded the student response toward the system. Also, we checked which methodology is preferred by researchers and why. A total number of 25 studies were analyzed which were published during the year of 2015 and 2019. The results indicate that most popular research technique is mixed methodology as it combines both qualitative and quantitative techniques. The purpose of this review is to offer new insights to researchers and provide them with advice about evaluation of AR applications and which tool or technique is more effective.

The education landscape is an environment prone to change due to the volatile and ever-changing nature of the digital society in which we all live. Although the world moves at a different pace and any generalization is bound to have several exceptions, there is evidence from research conducted in different places and contexts that educational methods are becoming increasingly digitized and driven by technological innovation. Among technological trends fuelled in many cases by the COVID-19 pandemic and the need to stay at home but online, augmented reality solutions received an additional push as a valid and versatile educational technology worth exploring and eventually integrating into several teaching methods already in use. Although the technology still faces problems related to its affordability, accessibility, and the technical skills required of users, some ongoing projects have already provided evidence that using augmented reality solutions as teaching and learning tools can improve teachers’ and students’ learning outcomes by increasing their engagement and interactivity. The same issues arose when personal computers, tablets, and smartphones were first discussed as valuable tools for education and have now found their way into most classrooms. This paper reviews some of the key concepts related to augmented reality, as well as some current trends, benefits, and concerns related to its inclusion in educational contexts in areas such as life sciences, engineering, and health. The work carried out and presented in this paper provides an interesting insight into a technology that has led to global phenomena, such as Pokémon Go, and is constantly improving in terms of portability, usability, and overall user experience. Throughout the paper and in the conclusions section, we discuss the relevance of using the best features of augmented reality and how they can contribute to positive educational outcomes.

Introduction: During mixed dentition period, the growth and development process of dentocraniofacial complex occurs, with temporomandibular joint as one of its centers of growth. The condition of temporomandibular joint can be seen from its condylar head shape; therefore, it is essential to understand the normal morphology of condylar head during mixed dentition period. Objective: this research aims to view the general morphology of condylar head during mixed dentition period. Method: Samples of panoramic radiographs were collected from Ma-ranatha Dental Hospital, Bandung, Indonesia. It consists of 70 male and 70 female subjects, di-vided into three groups according to their phase of mixed dentition period. Shape of subjects' condylar heads was determined by analyzing and comparing the tracing results of condyle in panoramic radiograph. Result: Study showed in first transitional period of mixed dentition, condylar head shape is dominated by round, as growth and development go on, the domination of condylar head shape is changed into convex on second transitional period. Conclusion: Mostly condylar head shape morphology during mixed dentition period is round-headed in first transitional and inter-transitional period, and convex-headed in second transitional period.

In order to understand the impact of lithologic heterogeneity of continental mixed fine-grained sedimentary rocks on reservoir brittleness in western Qaidam basin, the mechanical properties of the rocks and their correlation with mineral composition and petrographic characteristics were studied by measns of mineralogy, petrography and triaxial stress test. The results show that the reservoir rocks can be divided into 5 different types according to the mechanical properties of the reservoir (characteristics of stress-strain curves), among them Type I and III belong to similar elastoplastic failure model, type II shows a special pulse failure mode for plastic material, type IV shows a failure mode of mixed characteristics, and type V exhibits a typical plastic failure model. The correlation between minerals and mechanical properties indicates that quartz and feldspar, which are often considered brittle minerals, do not contribute much to the brittleness of continental fine-grained sedimentary rocks. The main minerals affecting reservoir brittleness are dolomite and clay minerals, and their contributions to reservoir brittleness are positive and negative, respectively. The petrographic analysis results prove that the abnormal correlation between rock mechanical properties and quartz and feldspar is caused by the different rock fabrics. When dolomite forms a rock skeleton, it typically exhibits greater strength, brittleness and physical properties than other minerals. Based on the results, a brittleness evaluation standard for continental fine-grained sedimentary rock reservoir is proposed, and the validity of the standard is verified by the spatial correlation between the lithology probability model and the micro-seismic monitoring data, indicating that the spatial heterogeneity of dolomite-rich rock is the main controlling factor for the development of ‘sweet spot’ in the Cenozoic continental fine-grained sedimentary rock reservoir in the Western Qaidam Basin.

Bayesian nonlinear mixed effects models for data in the form of continuous, repeated measurements from a population, also known as Bayesian hierarchical nonlinear models, are a popular platform for analysis when interest focuses on individual specific characteristics and relevant uncertainty quantification. Due to the limitation of computational power, this framework was relatively dormant until the late 1980s, but in recent years, the statistical research community saw vigorous development of new methodological and computational techniques for these models, the emergence of software, and wide application of the models in numerous industrial and academic fields. This article presents an overview of the formulation, interpretation, and implementation of Bayesian nonlinear mixed effects models and surveys recent advances and applications.

The efficiency of performance in various sports has the development of certain specific skills at its core. In ice hockey, both the technical aspects (techniques, stance) and the cognitive ones (keeping attention on the puck, game strategy, etc.) are highly important. This study is aimed at the identification of specific features that determine the performance efficiency of professional hockey players. We used virtual reality (VR) to study the differences between professional ice hockey players and novices in terms of motor responses to the puck’s presentation on different levels of difficulty. The study involved 22 participants, 13 of them being professional ice hockey players (M_age=20±2.9; mean age of training experience М=14.18±3.8) and 9 being not experienced participants (M_age=20±1.4). The study showed that the stick response time of professional hockey players is significantly higher (0.98 ms vs 1.5 ms, p≤0.05) in more difficult situations close to a real game. Moreover, professionals proved to have more stable movement patterns of the knee and hip joints. They also make fewer head movements as a response to stimuli during all runs (0.66 vs 1.25, p≤0.05). Therefore, the results indicate specific spatial-temporal, technical and tactical, and energetic determinants, that ensure higher performance efficiency in hockey players

The efficacy of the product development process is measured by the ability to launch a project with product and production process specifications that could guarantee that the manufacturing can produce it with the least impact. If a problem is detected late, they bring consequences beyond the high cost of the solution, if related to physical ergonomics, which will influence the well-being of operators, productivity, and quality. Virtual Reality (VR) and Digital Human Modeling (DHM) are ones of the enabling technologies of Industry 4.0 and has already been applied on a large scale in industries such as automotive, construction, and aeronautics. However, even though the huge applications, these technologies are not yet applied by these industries for the analysis of physical ergonomics during product development phases. This study aims to characterize the state of the art and technology about the application of Virtual Reality and Digital Human Modeling for the physical ergonomics analysis in the during product development phases in the industry through a systematic review of the literature and patents. In patent documents recovery, we used Derwent Innovation database. The research is based on searching the selected terms in the title, summary, and claims of the documents through a search strategy containing IPC code and keywords. In articles recovery, we searched ScienceDirect, Springer, and IEEExplore databases for scientific publications. The search resulted in 311 patents documents and 16 articles in the scientific database. This study analyzed the patents to map out the technological progress in this area, where we found in the charts and data an increasing number of publications per year and a spread application with a considerable number of new technologies presented in these recent patents. The literature review indicated that Virtual Reality technology complements the Digital Human Modeling during physical ergonomics analysis for manufacturing process already designed. The majority of research on the use of VR and DHM technologies for physical ergonomics analysis focus on the automotive industry and the ergonomic assessment of workstations and current processes. Further research is needed to investigate how Virtual Reality and Digital Human Modeling might assist in the understanding of physical ergonomics in certain tasks throughout the product development process, such as the simulation of worker posture or effort when assembling parts.

We describe the direct formation of mixed-phase (1T and 2H) MoS2 layers on Si as a photocathode via atomic layer deposition (ALD) for application in the photoelectrochemical (PEC) reduction of water to hydrogen. Without typical series-metal interfaces between Si and MoS2, our p-Si/SiOx/MoS2 photocathode showed efficient and stable operation in hydrogen evolution reactions (HERs). The resulting performance could be explained by spatially genuine device architectures in three dimensions (that is, laterally homo and vertically heterojunction structures). The ALD-grown MoS2 overlayer with the mixed-phase 1T and 2H homojunction passivates light absorber and surface states and functions as a monolithic structure for effective charge transport within MoS2. It is also beneficial in the operation of p-i-n heterojunctions with inhomogeneous barrier heights due to the presence of mixed-phase cocatalysts. The effective barrier heights reached up to 0.8 eV with optimized MoS2 thicknesses, leading to a 670 mV photovoltage enhancement without employing buried Si p-n junctions. The fast-transient behaviors via light illumination show that the mixed-phase layered chalcogenides can serve as efficient cocatalysts by depinning the Fermi levels at the interfaces. A long-term operation of ~ 70 h was also demonstrated in a 0.5 M H2SO4 solution.

Pure-compression shells have been the central topic in the form-finding of shells. This paper studies tension-compression mixed type shells by utilizing a NURBS-based isogeometric form-finding approach that analyzes Airy stress functions to expand the possible plan geometry. A complete set of smooth version graphic statics tools is provided to support the analyses. The method is validated using examples with known solutions, and a further example demonstrates the possible forms of shells that the proposed method permits. Additionally, a guideline to configure a proper set of boundary conditions is presented through the lens of asymptotic lines of the stress functions.

Research rarely explores LGBTQ+ youth bullying in the context of culture-specific outcomes (e.g., LGBTQ+ identity development) and what can mitigate the impact of peer stressors. This study used a concurrent mixed methods design to explore how experiences of peer victimization predicted LGBTQ+ youth’s identity development (i.e., stigma sensitivity, concealment motivation, and difficult process) and whether social support and outness served as protective, moderating factors. The mixed-methods approach provides a culture-specific context via qualitative inquiry to inform whether the quantitative findings align with how youth qualitatively discuss their experience of bullying, negative outcomes, and social support. Our sample consisted of 349 LGBTQ+ youth 14-17 years old who completed a survey (quantitative sample), and a subset of 39 LGBTQ+ youth who completed a semi-structured interview (qualitative sample). Our quantitative findings indicated that greater overall peer victimization was positively related to LGBIS-revised subscales of stigma sensitivity, concealment motivation, and difficult process, where both outness and social support moderated such relations. Qualitatively, victimized youth also reported stigma sensitivity and concealment motivation, while also endorsing how being out and having a support system played a role in their experience of being victimized. These qualitative findings align with our quantitative findings that classmate support mitigated the effects of peer victimization on difficulty of coming out. Implications for practitioners and researchers are provided.

With advances in Building Information Modeling (BIM), Virtual Reality (VR) and Augmented Reality (AR) technologies have many potential applications in the Architecture, Engineering, and Construction (AEC) industry. However, the AEC industry, relative to other industries, has been slow in adopting AR/VR technologies, partly due to lack of feasibility studies examining the actual cost of implementation versus an increase in profit. The main objectives of this paper are to understand the industry trends in adopting AR/VR technologies and identifying gaps within the industry. The identified gaps can lead to opportunities for developing new tools and finding new use cases. To achieve these goals, two rounds of a survey at two different time periods (a year apart) were conducted. Responses from 158 industry experts and researchers were analyzed to assess the current state, growth, and saving opportunities for AR/VR technologies for the AEC industry. The findings demonstrate that older generations are significantly more confident about the future of AR/VR technologies and they see more benefits in AR/VR utilization. Furthermore, the research results indicate that Residential and commercial sectors have adopted these tools the most, compared to other sectors and institutional and transportation sectors had the highest growth from 2017 to 2018. Industry experts anticipated a solid growth in the use of AR/VR technologies in 5 to 10 years, with the highest expectations towards healthcare. Ultimately, the findings show a significant increase in AR/VR utilization in the AEC industry from 2017 to 2018.

As part of the ongoing screening research for local edible plants in Thailand, Petroselinum crispum fruit oil was considered as a potential bioinsecticide with proven antimosquito activity against both the pyrethroid susceptible and resistant strains of Aedes aegypti. Due to the comparative mosquitocidal efficacy on these mosquitoes, this plant oil is promoted as a natural alternative and attractive candidate for further study in monitoring resistance of mosquito vectors. Therefore, the aim of this study was to evaluate the impact of P. crispum oil on the biochemical characteristics of the target mosquito larvae of Ae. aegypti, by determining quantitative changes of key enzymes responsible for xenobiotic detoxification, including glutathione-S-transferases (GSTs), α- and β-esterases (α-/β-ESTs), acetylcholinesterase (AChE), acid and alkaline phosphatases (ACP and ALP) and mixed-function oxidases (MFO). Three populations of Ae. aegypti, comprising the pyrethroid susceptible Muang Chiang Mai-susceptible (MCM-S) strain and the pyrethroid resistant Pang Mai Dang-resistant (PMD-R) and Upakut-resistant (UPK-R) strains, were used as test organisms. Biochemical study of Ae. aegypti larvae prior to treatment with P. crispum oil revealed that apart from AChE, the baseline activity of most defensive enzymes, such as GSTs, α-/β-ESTs, ACP, ALP and MFO, in resistant UPK-R or PMD-R, was higher than that determined in susceptible MCM-S. However, after 24-h exposure to P. crispum oil, the pyrethroid susceptible and resistant Ae. aegypti showed similarity in biochemical features, with alterations of enzyme activity in the treated larvae, as compared to the controls. A significant increase in the activity levels of GSTs, α-/β-ESTs, ACP and ALP was recorded in all strains of P. crispum oil-treated Ae. aegypti larvae, whereas MFO and AChE activity in these mosquitoes was decreased. The recognizable larvicidal capability on pyrethroid resistant Ae. aegypti, and the inhibitory effect on AChE and MFO, emphasized the potential of P. crispum oil as an attractive alternative application for management of mosquito resistance in current and future control programs.

Virtual Reality(VR) is an emerging technology with a broad range of application in training, entertainment, and business. To maximize the potentials of virtual reality as a medium, the unwelcome feeling of simulation sickness needs to be minimized. Even with advancements in VR, the usability concerns are barriers for a wide-spread acceptance. Several factors (hardware, software, human) play a part towards a pleasant VR experience. The reviewed scientific articles are mostly part of documents indexed in digital libraries. In this paper, we review the potential factors which cause simulation sickness and minimize the usability of virtual reality systems. We review the best practices from a developer’s perspective and some of the safety measures a user must follow while using the VR systems from existing research. Even after following some of the guidelines and best practices VR environments do not guarantee a pleasant experience for users. Limited research in VR environments towards requirement specification, design, and development for maximum usability and adaptability was the main motive for this work.

Low Back Pain (LBP) is one of the most common problems among adults. The usual physiotherapy treatment is to perform physical exercises. However, some LBP patients have false beliefs regarding their pain and they tend to avoid physical movements which might increase their pain and disability. Virtual Reality (VR) has shown to be an effective intervention in improving motor functions and reducing pain perception. Existing VR interventions for LBP rehabilitation were based on a non-immersive VR, whereas to effectively reduce the pain intensity, we need an immersive VR. In this paper, we introduce the development and evaluation of a serious game called RabbitRun with an immersive experience to engage the patients in a virtual environment and distract them from the pain while performing LBP exercises. The initial usability evaluation results suggest that RabbitRun game is enjoyable and acceptable. The game is easy to play and learn and most of the participants are willing to play the game at home. This solution will enhance the rehabilitation outcome since the patients who are suffering from LBP can use the system at their home and train more for long period of time using a smartphone and low-cost virtual reality device such as Google Cardboard.

Using flexible AC transmission system (FACTS) devices in power systems while adhering to some equality and inequality constraints, researchers around the world sought to address this issue with the objectives of improving the voltage profile, reducing power losses in transmission lines, and increasing system reliability and safety. The recent development of FACTS controllers opens up new perspectives for safer and more efficient operation of electrical power networks by continuous and rapid action on power systems parameters, such as phase angle shifting, voltage injection and line impedance compensation. Thus, an improvement on voltage profile and enhancement of power transfer capability can be obtained. It is for that, the idea behind the FACTS concept is to enable the transmission system to be an active element in increasing the flexibility of power transfer requirements and in securing stability of integrated power system. It may also be effective in transient stability improvement, power oscillations damping and balancing power flow in parallel lines. The primary issue that has significantly piqued the interest of a number of researchers working in this field is the FACTS optimization problem, which involves determining the optimal type, location, and size of FACTS devices in electrical power systems. For solving this mixed integer, nonlinear and non-convex optimization problem, this paper provides an in-depth and comprehensive review of the various optimization techniques covered in published works in the field. In this review, a classification of optimization techniques in five main groups that are widely used, such as classical optimization techniques or conventional optimization approaches, Meta heuristic methods, analytic methods or sensitive index methods and mixed or hybrid methods, is summarized. In addition, a performance descriptions and comparison of these different optimization techniques are discussed in this study. Finally, some advice is offered for future research in this field.

Background Augmented reality (AR) in surgery can offer an enhanced view of reality through the superimposition of computer-generated digital images on the real environment. It allows surgeons to integrate image visualisation, improving operative efficiency, surgical outcomes, surgical training and patient education. This review aims to evaluate the current status of augmented reality in surgery, surgical training and potential future applications. Methods We performed a non-systematic review of available literature from January 2005 to August 2021 by searching PubMed, EMBASE and the Cochrane library using a combination of terms “augmented reality”, “virtual reality”, “surgery”, “simulation” and “training”. Articles considered for this review were identified by relevant search criteria including title, keywords, abstract, and full-text. Conclusions AR technologies present an exciting new trend with multiple potential applications in surgery. Intraoperative AR systems have shown promise in specialties involving fine movement of organs during surgical procedures, including Neurosurgery, Ears, Nose and Throat and Orthopaedic Surgery. AR has also exhibited the potential to enhance surgical training and improve knowledge acquisition; it can foster international collaborations via telesurgery and telepresence. In the near future, AR will likely work in symbiosis with surgeons, serving as a complex computer-human coalition which can improve patient outcomes, patient education and surgical training.

Efficient alternatives in energy production and consumption are constantly investigated by increasingly strict policies. In this way, the pollutant emissions that contribute to the greenhouse effect reduce and sustainability of the electricity sector increase. With more than a third of the world's energy consumption, buildings have great potential to contribute these sustainability goals. Additionally, with growing incentives in the Distributed Generation (DG) and Electric Vehicle (EV) industry, it is believed that Smart Buildings (SBs) can be a key in the field of residential energy sustainability in the future. In this work, an energy management system in SBs are developed to reduce the power demanded of a residential building. In order to balance the demand and power provided by the grid, microgrids such as Battery Energy Storage System (BESS), EVs and Photovoltaic Generation panels (PV) are used. Here, a Mixed Binary Linear Programming formulation (MBLP) is proposed to optimize the charge and discharge scheduling of EVs and also BESS. In order to show the efficiency of the model, a case study involving three scenarios and an economic analysis is considered. The results point a 65% reduction in peak load consumption supplied by grid and a 28.4% reduction in electricity consumption costs.

Technological advances made Virtual and Mixed Reality (VMR) accessible at our fingertips. However, only recently VMR has been explored for the teaching of biology. Here, we highlight how VMR applications can be useful in biology education, discuss about caveats related to VMR use that can interfere with learning, and look into the future of VMR applications in the field. We then propose that the combination of VMR with Machine Learning and Artificial Intelligence can provide unprecedented ways to visualise how species evolve in self-sustained immersive virtual worlds, thereby transforming VMR from an educational tool to the centre of biological interest.

In this study, a mixed rule of degree of precision nine has been developed and implemented in the field of electrical sciences to obtain the instantaneous current in the RLC- circuit for particular value .The linearity has been performed with the Volterra’s integral equation of second kind with particular kernel . Then the definite integral has been evaluated through the mixed quadrature to obtain the numerical result which is very effective. A polynomial has been used to evaluate Volterra’s integral equation in the place of unknown functions. The accuracy of the proposed method has been tested taking different electromotive force in the circuit and absolute error has been estimated.

Functional mobility assessments (i.e., Timed Up and Go) are commonly used clinical tools for mobility and fall risk screening in the aging population. In this work, we proposed a new Mixed Reality (MR)-based assessment that utilized a Microsoft HoloLens^TM headset to automatically lead and track the performance of functional mobility tests, and subsequently evaluated its validity in comparison with reference inertial sensors. Twenty-two healthy adults (10 older, 12 young) participated in this study. An automated functional mobility assessment app was developed based on the HoloLens platform. Mobility performance was recorded with the headset built-in sensor and validated with reference inertial sensor (Opal, APDM) taped on the headset and lower back. Results indicate vertical kinematic measures by HoloLens was in good agreement with the reference sensor (Normalized RMSE ~ 10%). Additionally, the HoloLens-based test completion time was in perfect agreement with clinical standard stopwatch measure. Overall, our preliminary investigation indicates that it is possible to use an MR headset to automatically guide users to complete common mobility tests with good measurement accuracy, thus it has great potential to provide objective and efficient sensor-based mobility assessment.

The production of fatty acids ethyl esters (FAEEs) to be used as biodiesel from oleaginous microalgae shows great opportunities as an attractive source for the production of renewable fuels without competing with human food. To ensure the economic viability and environmental sustainability of the microbial biomass as a raw material, the integration of its production and transformation into the biorefinery concept is required. In the present work, lipids from wet Isochrysis galbana microalga were extracted with ethyl acetate with and without drying the microalgal biomass (dry and wet extraction method, respectively). Then, FAEEs were produced by lipase-catalyzed transesterification and esterification of the extracted lipids with ethanol using lipase B from Candida antarctica (CALB) and Pseudomonas cepacia (PC) lipase supported on SBA-15 mesoporous silica functionalized with amino groups. The conversion to FAEEs with CALB (97 and 85.5 mol% for dry and wet extraction, respectively) and PS (91 and 87 mol%) biocatalysts reached higher values than those obtained with commercial Novozym 435 (75 and 69.5 mol%). Due to the heterogeneous nature of the composition of microalgae lipids, mixtures with different CALB:PC biocatalyst ratio were used to improve conversion of wet-extracted lipids. The results showed that a 25:75 combi-lipase produced a significantly higher conversion to FAEEs (97.2 mol%) than those produced by each biocatalyst independently from wet-extracted lipids and similar ones than those obtained by each lipase from the dry extraction method. Therefore, that optimised combi-lipase biocatalyst, along with achieving the highest conversion to FAEEs, would allow improving viability of a biorefinery since biodiesel production could be performed without the energy-intensive step of biomass drying.

Global use of single-use non-biodegradable plastics, like bottles made of polyethylene tereph-thalate (PET), have contributed to catastrophic levels of plastic pollution. Fortunately, microbi-al communities are adapting to assimilate plastic waste. Previously, our work showed a full consortium of five bacteria capable of synergistically degrading PET. Using omics approaches we identified key genes implicated in PET degradation within the consortium’s pangenome and transcriptome. This analysis led to the discovery of a novel PETase, EstB, discovered to hydrolyze oligomer BHET, and polymer PET. Besides genes implicated in PET degradation, many other biodegradation genes were discovered. Over 200 plastic and plasticizer degrada-tion related genes were discovered through the Plastic Microbial Biodegradation Database (PMBD). Diverse carbon source utilization was observed by a microbial community-based as-say, which paired with an abundant number of plastic and plasticizer degrading enzymes in-dicates a promising possibility for mixed plastic degradation. Using RNAseq differential analysis, several genes were predicted to be involved in PET degradation including aldehyde dehydrogenases and several classes of hydrolases. Active transcription of PET monomer me-tabolism was also observed, including the generation of polyhydroxyalkanoate (PHA) bi-opolymers. These results present an exciting opportunity for the bio-recycling of mixed plastic waste with upcycling potential.

The Covid-19 pandemic caused a shift in teaching practice towards blended learning for many Higher Education institutions. This led to the rapid adoption of certain digital technologies within existing teaching structures as a means to meet student access needs and facilitate learning. Integration of these technologies caused numerous challenges for practitioners and often provided mixed results. This paper is an attempt to summarise and extend pre-Covid pedagogical research to leverage digital immersive technologies for blended teaching in the post-pandemic era. Focus is given towards the evolution of Virtual Learning Environments through elements of immersive audio-visual technologies, which are shown to be effective when coupled in a blended approach. It is both a review of these methodologies and a case study of the I-Ulysses: Virtual Learning Environment as a point of comparison for evaluating the review.

This study investigates effective strategies for second language education in primary schools, analyzing the efficacy of immersive and interactive methods, digital literacy tools, and mixed-method approaches. The findings reveal significant improvements in language proficiency and student engagement through these methodologies, with immersive and interactive strategies showing substantial benefits in oral proficiency and engagement, digital tools enhancing accessibility and engagement, and mixed-method approaches yielding the highest overall effectiveness. The study underscores the importance of a balanced, flexible approach to language education, integrating traditional and modern methods to cater to diverse learner needs. These strategies not only advance linguistic skills but also contribute to the broader cognitive and emotional development of young learners, emphasizing the critical role of effective language education in preparing students for a globalized world.

With continued technological innovation in the fields of mixed reality (MR), wearable-type MR devices, such as helmets, have been released and are frequently used in various fields, such as entertainment, training, and education. However, because each product has different parts and specifications in terms of the design and manufacturing process, users feel that the virtual objects overlaying real environments in MR are visualized differently depending on the scale and color used by the MR device. In this paper, we compare the effect of scale and color parameters on users’ perception in using different types of MR devices to improve MR experience. We conducted two experiments (scale and color), and our experimental study showed that the subjects who participated in the scale perception experiment clearly tended to underestimate virtual objects, compared with real objects, and overestimate color in MR environments. [MM1]Please confirm meaning.

Binge-eating disorder (BED) and bulimia nervosa (BN) have adverse psychological and medical consequences. Novel interventions, like the integration of virtual reality (VR) with cue-exposure therapy (VR-CET), enhance outcomes for refractory patients compared to cognitive behavior therapy (CBT). Little is known about the feasibility and acceptability of translating VR-CET into real-world settings. To investigate this question, adults previously treated for BED or BN with at least one objective or subjective binge episode/week were recruited from an outpatient University eating disorder clinic to receive up to eight weekly one-hour VR-CET sessions. Eleven of 16 (68.8%) eligible patients enrolled; nine (82%) completed treatment; 82% (9/11) provided follow-up data 7.1 (SD=2.12) months post-treatment. Overall, participant and therapist acceptability of VR-CET was high. Intent-to-treat objective binge episodes (OBEs) decreased significantly from 3.3 to 0.9/week (p &lt; .001). Post-treatment OBE 7-day abstinence rate for completers was 56%, with 22% abstinent for 28 days at follow-up. Among participants purging at baseline, episodes decreased from a mean of one to zero/week, with 100% abstinence maintained at follow-up. The adoption of VR-CET into real-world clinic settings appears feasible and acceptable, with a preliminary signal of efficacy. Findings, including some loss of treatment gains during follow-up may inform future treatment development.

Poor households are more likely less resilient under climate change, risks of productive assets, social-related shocks, and decline of land productivity. The ability to deal with household resilience against poverty under the uncertain condition of risk is limited in the highlands of Ethiopia. The study aims to identify determinants of household resilience to livelihood insecurity under the crop-livestock mixed farming systems in Goncha district, Northwest highlands of Ethiopia. Primary data were collected by conducting face-to-face interviews among 280 households using structured questionnaire. Descriptive statistics, Kruskal-Wallis test and structural equation modeling were used to analyse the data. The results disclosed that sustainable management of the farming systems, cultivation of more fertile farmland, saving performance, diversification of income-earning activities, intensification of livestock husbandry practices, access to irrigation, and familiarity with practical technologies were found to be significant determinants at p<0.001 to household resilience of smallholder farmers. Social network development and tree plantation were explained household resilience to livelihood insecurity at P<0.01 and P<0.1 significant levels, respectively. The study concluded that scaling up sustainable management of the farming system and practical technologies, enhancing saving behavior, promoting income diversification, and intensifying agroforestry are significant for household resilience to livelihood insecurity of smallholders across agro-ecologies.

We performed a global analysis with data from 149 countries to test whether temperature can explain the spatial variability of the spread rate and mortality of COVID-19 at the global scale. We performed partial correlation analysis and linear mixed effect modelling to evaluate the association of the spread rate and motility of COVID-19 with maximum, minimum, average temperatures and temperature extreme (difference between maximum and minimum temperature) and other environmental and socioeconomic parameters. After controlling the effect of the duration after the first positive case, partial correlation analysis revealed that temperature was not related with the spatial variability of the spread rate of COVID-19. Mortality was negatively related with temperature in the countries with high-income economies. In contrast, temperature extreme was significantly and positively correlated with mortality in the low-and middle-income countries. Taking the country heterogeneity into account, mixed effect modelling revealed that inclusion of temperature as a fixed effect in the model significantly improved model skill predicting mortality in the low-and middle-income countries. Our analysis suggest that warm climate may reduce the mortality rate in high-income economies but in low and middle-income countries temperature extreme may increase the mortality risk.

Due to climate change, droughts have been occurring more frequently in Germany in recent years. More frequent and prolonged drought affects the health of trees and increases the risk of forest fires. A large-scale forest fire broke out near Treuenbrietzen, Brandenburg, in the summer of 2018 in pine monospecific forests. In addition to evaluating the damage caused, future reforestation is discussed, which is related mainly to the expectations of the forest owners. A telephone survey of seven affected forest owners was conducted using a semi-structured guided interview. The results from our interview demonstrated the support of private forest owners for mixed forests over monospecific pine forests. Most forest owners do not prioritize economic benefit with the forest land as forestry was not the primary source of income. Instead, the ownership of the forest tends to be linked to idealistic, cultural, and family values. The motives for reforestation vary but are often externally influenced. Different goals of forest owners lead to the challenge of finding consensus among them. We conclude that forestry advice by the federal and state governments is essential, especially on how climate change can affect local forests, to sensitize private forest owners to this problem.

This paper mainly analyzes the design and control of the rotational inverted pendulum, and presents a state space expression. Since the system is highly unstable a feedback control system is used. Augmentations with weighting functions based mixed sensetivity and H2 optimal control methods are used to make the system stable for uprise position. The rotational inverted pendulum have been simulated and compared with the proposed controllers and a promising results have been analyzed sussesfuly.

Interdisciplinary research into the underlying neural processes of music therapy (MT) and subjective experiences of patients and therapists are largely lacking. The aim of the current study was to assess the feasibility of newly developed procedures (including EEG/ECG hyperscanning, synchronous audio-video monitoring, and qualitative interviews) to study the personal experiences and neuronal dynamics of moments of interest during MT with stroke survivors. The feasibility of our mobile set-up and procedures as well as their clinical implementation in a rehabilitation centre and an acute hospital ward were tested with four phase C patients. Protocols and interviews were used for the documentation and analysis of the feasibility. Recruiting patients for MT sessions was feasible, although data collection on three consecutive weeks was not always possible due to organisational constraints, especially in the hospital with acute ward routines. Research procedures were successfully implemented, and according to interviews, none of the patients reported any burden, tiredness or increased stress due to the research procedures, which lasted approx. 3 hours (ranging from 135min to 209min) for each patient. Implementing the research procedures in a rehabilitation unit with stroke patients was feasible and only small adaptations were made for further research.

Virtual reality (VR) can play a key role in automotive marketing research, lowering costs and shortening the time it takes to bring a new product to market. However, there are still few VR applications that support automotive customers' experiences during the early stages of product development. Through a systematic review of literature and patents, this study aims to identify the challenges and opportunities for the application of virtual reality in car clinics, and to categorize them into attributes. We searched through the knowledge databases of PatentScout, ScienceDirect, Springer, and IEEEXplore. We found 72 patents with a high concentration in a few inventors. The United States of America presented the greatest number of records and the most common applications related to the apparatus for automatically reading respondents' reactions in a virtual environment. In terms of articles, we found 19 research papers that discussed sixteen categories identified as challenges and opportunities for automotive marketing research: 1) cost, 2) location to customers, 3) flexibility in interactions, 4) model transportation, 5) depth perception, 6) haptic perception, 7) motion, 8) movement perception/ physical collision, 9) color and texture, 10) sound feedback, 11) product interaction/manipulation, 12) visual-spatial, 13) graphic quality, 14) intuitiveness, 15) cybersecurity and 16) cybersickness. We conclude that the automotive industry can employ virtual reality for marketing research, but relevant elements such as hardware and software definition, stimulus quality, and research objectives, among others, must be considered.

We propose a computer-generated hologram method for near-eye virtual reality and augmented reality 3D display. A 3D object located near the holographic plane is projected onto a projection plane to obtain a plurality of projected images with different angles. The hologram is calculated by superposition of projected image convolution with a specific PSF through the interference of reference wave with object wave. Holographic 3D display systems with LED as illumination, 4f optical filtering system and lens as eyepiece for near-eye VR display and HOE as combiner for near-eye AR display are designed. The results show that the proposed method is about 38 times faster than the conventional point cloud method. The proposed method is flexible to produce speckle noise free high-quality VR and AR images with efficient focus and defocus capabilities.

Amidst the rapid urbanization of cities worldwide, there is a pressing need for practical tools to manage and preserve the invaluable architectural heritage contained within them. This research introduces a systematic methodology for digitalizing and interpreting architectural heritage through augmented Reality (AR). The primary goal is to enhance the documentation, preservation, and accessibility of cultural assets, addressing both educational and touristic needs. Focusing on the historic district of Pelourinho in Salvador, Bahia, Brazil, the study showcases how 3D digitalization combined with AR can provide users with an interactive experience with historical structures, bridging the temporal divide. By integrating the digital replicas of historic buildings into a real-time environment, users gain enriched insights into these structures’ history, architecture, and cultural significance. Though the preliminary results underscore the potential of this approach, comprehensive user testing remains an area for future exploration. This paper thus highlights the potential of AR in historical and cultural preservation, suggesting its broader implications for education, tourism, and heritage management.

A premise of statistical learning research is that learners attend to and learn the frequencies of repeating or co-occurring elements in the input. When the input is a series of words, participants readily learn the frequencies of phoneme sequences, that is, to learn phonotactic frequencies. Inherent to the concepts of both frequency and phonotactics is order, or the temporal structure of the input. Order is similarly inherent to statistical learning, yet the effect of order on statistical learning is not well understood. In the present study, adult participants learned the relative frequencies of eight item-medial consonant sequences, for example, the /mk/ in /nʌmkət/. Across five ordering conditions, both familiarization and test stimuli were independently ordered and randomized, thus allowing for a relatively broad search for order effects in an established statistical learning paradigm. Participants learned the target frequencies equivalently across the five ordering conditions, indicating no modulating effect of order. Nevertheless, participants also approached the task by applying idiosyncratic, structured orders to their responses. The result is an unexpected but robust effect of order. Both the results and the design of the study also allow for increased integration of statistical learning with memory and other aspects of cognition.