Bacteriophages can provide alternative measures for the control of E. coli O157:H7 that is currently an emerging food-borne pathogen of severe public health concern. This study was aimed at characterising E. coli O157:H7 specific phages as potential biocontrol agents for these pathogens. Fifteen phages were isolated and screened against 69 environmental E. coli O157:H7. Only 3 phages displayed broad lytic spectra against environmental shiga toxin-producing E. coli O157:H7 strains. These 3 lytic phages were designated V3, V7 and V8. Subsequent characterization indicated that they displayed very high degree of similarities despite isolation from different locations. Transmission Electron microscopy (TEM) of the phages revealed that they all had isometric heads of about 73 – 77 nm in diameter and short tails ranging from 20 - 25 nm in diameter. Phages V3, V7 and V8 were assigned to the family Podoviridae based on their morphology. Pulsed field gel electrophoresis (PFGE) genome estimation of the 3 phages demonstrated identical genome sizes of ~ 69 nm. The latent periods of these phages were 20 min, 15 min, and 20 min for V3, V7 and V8 respectively while the burst sizes were 374, 349 and 419 PFU/ infected cell respectively. While all the phages were relatively stable over a wide range of salinity, temperatures and pH values, their range of infectivity or lytic profile was rather narrow on environmental E. coli O157:H7 strains isolated from cattle faeces. This study showed that the Podoviridae bacteriophages are the dominant E. coli O57:H7-infecting phages harboured in cattle faeces in the North-West Province of South Africa and due to their favourable characteristics can be exploited in the formulation of phage cocktails for the bio-control of E. coli O157:H7 in meat and other meat products.

A multi-tool analytical practice was used for characterization of 16^th century carpet manufactured in Cairo. Mild extraction method with hydrofluoric acid enabled isolation of intact flavonoids and their glycosides, anthraquinones, tannins and indigoids from fibre samples. High-performance liquid chromatography coupled to spectroscopic and mass spectrometric detectors was used for identification of natural dyes present in the historical samples. Weld, young fustic and brazilwood were identified as the dye sources in yellow thread samples. Red fibres have been colored with lac dye, whereas green fibre shades were obtained with indigo and weld. Tannin-containing plant material in combination with indigo and weld were used to obtain brown hue of thread. Four uncommon and thus-far unknown dye components were also found in the historical samples. These compounds probably represent unique fingerprint of dyed threads from this region. Scanning electron microscopy with energy-dispersive X-ray detector (SEM-EDS) and Fourier transformation infrared spectroscopy (FT-IR) were used for identification and characterization of substrates and mordants present in the historical carpet. Carbon and oxygen were detected in large quantities as a part of the wool protein. The presence of aluminum, iron and calcium indicated their usage as mordants. FT-IR analysis showed bands characteristic to woolen fibres and SEM micrographs definite structure of wool.

This paper presents an overview of the smart electro-clothing systems (SeCSs) targeted at health monitoring, sports benefits, fitness tracking, and social activities. Technical features of the available SeCSs, covering both textile and electronic components, are thoroughly discussed and their applications in the industry and research purposes have been highlighted. In addition, it also presents the developments in the associated areas of wearable sensor systems and textile-based dry sensors. As it became evident during the literature research, such a review on SeCSs covering all relevant issues has not been presented before. This paper will be particularly helpful for new generation researchers investigating the design, development, function and comforts of the sensor integrated clothing materials.

Circulating tumor DNA (ctDNA) in fluids has gained attention because ctDNA seems to identify tumor-specific abnormalities, which could be used for diagnosis, follow-up of treatment, and prognosis: the so-called liquid biopsy. Liquid biopsy is a minimally invasive approach and presents the sum of ctDNA from primary and secondary tumor sites. It has been possible not only to quantify the amount of ctDNA but also to identify (epi)genetic changes. Specific mutations in genes have been identified in the plasma of patients with several types of cancer, which highlights ctDNA as a possible cancer biomarker. However, achieving detectable concentrations of ctDNA in body fluids is not an easy task. ctDNA fragments present a short half-life, and there are no cut-off values to discriminate high and low ctDNA concentrations. Here, we discuss the use of ctDNA as a cancer biomarker, the main methodologies, the inherent difficulties, and the clinical predictive value of ctDNA.

A possible way to valorize citrus peels, which are byproducts of the juice extraction industry, is to use them as natural biopreservatives. In this paper we present early results from a compared Solvent Free Microwave Extraction (SFME) with Hydro-Distillation (HD) and Cold Pressing (CP) of essential oils (EOs) using fresh orange peel (Citrus sinensis L. var. Valencia late), a by-product in the production of orange juice in Algeria. The EOs were analyzed by gas chromatography coupled to mass spectrometry (GC-MS). All extracted C. sinensis EOs were chemotype limonene (94.64 to 95.48%). SFME is performed without added any solvent or water. SFME increases EO yield and eliminate wastewater treatment, resulting in a great progress in terms of time and cost efficiency. In its second part, the present study was conducted to evaluate “in vitro”, the antioxidant activities of Solvent Free Microwave (SFM) extracted orange EO by using the DPPH• (2,2-di-phenyl-1-picrilhydrazyl) free radical scavenging assay. The ability of orange EO to scavenge the free radical DPPH• was high, exceeding 80%. The result of the DPPH assay gives an IC₅₀ range value of 89.25 μg/mL (0.09 mg/mL) for the studied sample. Accordingly to the scientific literature, C. sinensis EO tested in the present study presented strong antioxidant activity, when looking to its values of AAI = 1.12 μg/mL. The feasibility of biopreservation used EOs as an alternative to synthetic techniques for liquid whole egg (LWE) stored under commercial retail conditions was investigated. The orange EO extracted by SFM was screened for its antibacterial and antioxidant activities in LWE at concentrations of 0.1, 0.3 and 0.5%. The TBA-RS results showed that the EO treatments significantly (p < 0.05) reduced the lipid oxidation in LWE. The long term oxidative, microbial and organoleptical stability of the LWE during display was positively influenced by orange EO treatments. Therefore, the results obtained here confirm that EO treatment as a promising technology to extend the commercial shelf-life of liquid egg products during retail/display.

Computational fluid dynamics (CFD) has, in the last decade, being an essential problem solving tool in industries such as pharmaceutical, pulp, petrochemical as well as Oil and Gas processing. The use of CFD for mixer design is unpopular in many countries in Africa. Therefore, this study investigates the characteristics of Brine-Surfactant mixing in a horizontal pipeline using CFD. The CFD is conducted by AnsysFluent software (licensed). A T-junction pipe is created and meshed with unstructured tetrahedral elements using design modeler. Discretization is done by Finite Volume Method (FVM), cell-centered scheme with Second-Order Upwind Scheme. The pressure term is introduced into the continuity equation by SIMPLE (Semi-Implicit Method for Pressure Linked Equations) algorithm. The kinetic epsilon model, also known as k-e model is administered to define the properties of the fluid and geometry, such as velocity, species mole fraction, pipe diameter. The boundary conditions is selected based on filed data. The rate of fluid flow in the primary region is 650 bbl/day at 400psi in 4in diameter pipeline, which is 100m long. The numerical simulation was based upon the governing equations such s continuity, Navier’s stoke, energy as well as specie transport equations. The findings shows that higher concentration results in increased mixing time, while 2% conc. of surfactant reaches homogeneity in 20 minutes at 72 meters of the pipe length. The result validated with field detail and the empirical result from literature, and is consistent. This study provide insight on industrial mixer design, chemical injection system, as well as gas pipeline design and optimization, especially in multiphase scale transport.

Background - Chronic kidney disease with unknown aetiology (CKDu) is a progressing disease which is affecting many Sri Lankans’ yearly, this disease is slow progressive, irreversible and asymptomatic disease. Patients suffering from CKDu over the past two decades have been evaluated using the estimated glomerular filtration rate (e-GFR). This is the standard test performed under WHO guidelines to investigate and grade the CKDu, and this creatinine clearance is measured in this in order to grade the patient. Backache has been a common symptom presented in most of the chronic kidney disease patients (CKD), patients with CKDu are liable to get backache due to the renal failure that takes place (Jayathilake et al., 2013; Redmon et al., 2016). Objective – To detect a correlation between serum creatinine values and level of backache presented in the patient. Method -Using an interview based questionnaire to assess patients’ body condition and the degree of backache is assessed, 59 patients were part of the study for a period of five months and had an average age of 60.3 years. The questionnaire answers are scaled into four main types of backache from the least to the most painful based on the pain scale adapted from Kapkia. Serum creatinine is measured using an automated analyzer which is measured using Jaffe’s reaction. Using Pearson R correlation, the relationship was determined between serum creatinine and backache (Kafkia et al., 2011). Results – The results were obtained for 58 patients (n=58), where the mean backache score was 2.30 and mean serum creatinine value 2.77. The Pearson R value obtained was 0.01 which is indicating almost no relationship between backache and serum creatinine. Patients with stage 3 kidney disease (n=14) had an average E-GFR of 38.0, stage 4 (n=38) with 22.3 and stage 5 (n=6) with 14.0. Conclusion – Backache can be used an indicator of CKDu since it is presented in most patients’ suffering from the disease but unable to be used to determine the stage of CKDu suffered by the patient due to the external causes that leads to backache. Several predisposing factors such as temperature, water source and agricultural activity can influence the backache.

Polyhydroxyalcanoates (PHAs) are biodegradable polymers synthesized in cytoplasmic granules in bacteria, such as Cupriavidus necator (Ralstonia eutropha), Alcaligenes latus, Pseudomonas spp., Comamonas spp. and other species. PHAs accumulation occurs in response to stress conditions, i.e. under high carbon and low nitrogen (24:1 ratio). PHA can be synthesized using recombinant microorganisms (provided with the operon phbA/phbB/phbC), escaping the constrains of nutrient request, except addition of high amount of sugar (glucose, lactose, fructose). In this study; E. coli was genetically modified for PHB production in biofermentors. The production of PHA at industrial scale requires a continuous supplementation of fermentable sugars to support the availability of nutrients and to assess the level of the exponential growth phase; since sugars are required either for bacterial growth either for PHA synthesis and energy storage. The biofermentors need to be run in automated system. Sensors are used at many points in fermentators; in the evaluation of parameters: consumption of sugars; cell density; quantification of PHB synthesis. The need of operational control during the fermentation has prompted us to application of three measurements; one unit linked to a Nanodrop to evaluate OD; one linked to a reaction chamber to measure sugars consumed by enzyme based fluorescence detection; and one for bacteria Nile Blue staining and fluorescence intensity reads. The growth of bacteria on three different plant by-products was monitored and PHB production in four days using a banana by-product feed was optimised. These detectors will make possible to exploit the full potential of bioreactors optimizing the time of use and maximizing the number of bacteria synthesizing PHA.

The use of Learning Management Systems (LMS) has had a rapid growth over the last decades. Great efforts have been recently made to assess the level of performance of the students online due to the COVID-19 pandemic. Faculty members with limited experience in the use of LMS such as Moodle, Edmodo, MOOC, Blackboard and Google Classroom can have some problems creat-ing online tests. In this work, a new plugin for Moodle is presented: FastTest PlugIn. This plugin is based on a Microsoft® Excel spreadsheet and it can be used to export questions to Moodle. Us-ers of FastTest PlugIn can create question pools in an easy and intuitive way. A literature review about plugins used to import/export questions in Moodle is carried out. Then, the characteristics of FastTest PlugIn are presented. At the end, the characteristics of the main plugins found in the literature are discussed and compared with the ones of FastTest PlugIn.

The novel coronavirus (SARS-CoV-2) is a human pathogen recently emerged in China, causing a global pandemic of severe respiratory illness (COVID19). SARS-CoV-2 makes entry into human cells through its spike (S) protein that binds to cell surface receptors. Widespread of SARS-CoV-2 has been attributed to high affinity of S protein to its receptor. A homology model of the receptor binding domain of SARS-CoV-2 S protein (RBD) was built. RBD- receptor docking and published molecular dynamics data were used to map the key RBD-receptor interaction hotspot (RBDhp) on the RBD. Primary virtual screening was carried out against RBDhp using more than 3300 compounds approved by U.S Food and Drug Administration (FDA) and other authorities for human use. Compounds that bind to hpRBD with a binding energy ≤ - 6.5 kcal/mol were subjected to secondary screening using a recently published cryo EM (2.9 Å) structure of RBD. A cardiac glycoside (dgitoxin), two anthracyclines (zorubicin and aclarubicin), a tetracycline derivative (rolitetracycline), a cephalosporin (cefoperazone) and a food dye (E-155) were predicted to be most potent inhibitors of RBD – receptor interaction. An anti-asthmatic drug (zafirlukast) and several other drugs (itrazol, fazadinium, troglitazone, gliquidone, Idarubicin, Oxacillin) were found to be high affinity binders that may have a potential to inhibit RBD – receptor interaction.

Suicidal behaviour remains difficult to predict and prevent, even for experienced mental health care professionals. The known distal risk factors for suicidal behaviour are not sufficiently specific to fully understand the complex dynamic processes that precede a suicide attempt. Real-time mobile monitoring data can be used to analyse proximal risk mechanisms within the suicidal process. At the same time smartphone-based safety planning and self-monitoring may enhance a patient’s self-management skills thereby increasing their capacity to respond to a suicidal crisis and to become more aware of crisis symptoms. The current paper describes the theoretical and conceptual rationale for the CASPAR study which applies an innovative approach to the study of suicidal processes. It uses basic science approaches to inform the implementation of an innovative suicide prevention intervention. We aim to develop and implement mobile safety plan in conjunction with real-time monitoring in order to both directly implement suicide prevention interventions and to study the ongoing dynamics of individual suicidal behaviour by applying network analysis.

Rare earths are classified as most important and critical material for US economy and defense by Congress and a mandate has been set to increase their in-house production, domestic resource utilization and decrease reliance on foreign resources and reserves. They are widely available in earth crust as ore (bastnaesite (La, Ce)FCO₃, monazite, (Ce, La, Y, Th)PO₄, and xenotime, YPO₄), but their so-called economic reserves are sparsely located geographically. They may be produced by various means such as beneficiation (physical, chemical, mechanical, or electrical), reduction (direct or indirect), electrolysis (of aqueous or molten / fused single or mixed salt systems) at high temperature or hydrometallurgy. Out of these, direct reduction also known as metallothermic reduction (La and Ca reduction) is mostly utilized. Its variant, high temperature electrowinning of fused salts is also practiced widely. These processes are material and application specific. In this study, author will employ thermodynamics (Ellingham diagrams, free energy of formation, reduction potential, Nernst equation, Pourbaix (E_h-pH) diagrams, E-pO^-2 diagrams), kinetics and energetic of a chemical reaction (chemical metallurgy) to reduce rare earth oxide / salt to rare earth metals (REO/RES – REM). It is shown that materials and energy requirement vary greatly depending on type of mineral ore, production facility, and beneficiation / mineral processing method selected. Aim is to reduce dependence on coal deposits. It is anticipated this route will be able to produce rare earths with > 35% yield and > 98% purity which be described in subsequent studies and patents.

A rapid, precise, accurate and low cost method for the determination of vitamin E (α-tocopherol) in cereal products and biscuits was developed. The uncertainty was calculated for the first time and the methods were performed in different cereal products and biscuits, characterized as “superfoods”. The limits of detection and quantification were calculated. Accuracy and precision were estimated using the certified reference material FAPAS T10112QC and the determined values were in good accordance with the certified values. The health claims according to the daily reference values for vitamin E were calculated and the results proved that the majority of the samples examined showed %daily value higher than 15%.

Soil-structure interaction (SSI) could affect the seismic response of structures. Since liquid storage tanks are vital structures and must continue their operation under severe earthquakes, their seismic behavior should be studied. Accordingly, the seismic response of liquid storage tanks founded on half space soil is scrutinized under different earthquake ground motions. To better comparison, the six considered ground motions are classified based on their pulse like characteristics, into two groups, named far and near fault ground motions. To model the liquid storage tanks, the simplified mass-spring model is used and the liquid is modeled as two lumped masses known as sloshing and impulsive, and the interaction of fluid and structure is considered using two coupled springs and dashpots. The SSI effect, also, is considered using a coupled spring and dashpot. Besides, four types of soils are used to consider wide variety of soil properties. To this end, after deriving the equations of motion, the MATLAB programming is employed to obtain the time history responses. Results show that although the SSI effect leads to decrease the impulsive displacement, overturning moment and normalized base shear, the sloshing (or convective) displacement is not affected by such effects due to its long period.

To better understand the shape memory materials and self-healing materials, a new series of liquid-crystalline shape memory polyurethane (LC-SMPU) composites, named SMPU-OOBAm, were successfully prepared by incorporating 4-octyldecyloxybenzoic acid (OOBA) into the PEG-based SMPU. The effect of OOBA on the structure, morphology and properties has been carefully investigated. The results demonstrate that SMPU-OOBAm have liquid crystalline properties, triple-shape memory properties and self-healing properties. The incorporated OOBA promotes the crystallizability of both soft and hard segments of SMPU, and the crystallization rate of the hard segment of SMPU decreases when the OOBA-content increases. Additionally, the SMPU-OOBAm forms a two-phase separated structure (SMPU phase and OOBA phase), and it shows two-step modulus changes upon heating. Therefore, the SMPU-OOBAm shows triple-shape memory behavior, and the shape recovery ratio decreases with an increase in the OOBA content. Finally, SMPU-OOBAm shows self-healing properties. The new mechanism can be ascribed to the heating-induced “bleeding” of OOBA in the liquid crystalline state and the subsequent re-crystallization upon cooling. This successful combination of liquid crystalline properties, triple-shape memory properties and self-healing properties make the SMPU-OOBAm composites with many promise applications in smart optical devices, smart electronic devices and smart sensors.

The manuscript studies the release kinetic of fluorescein from colloidal liquid crystals made up from monoglyceride and different non-ionic surfactants. The release experiments were carried out under sink conditions, and mathematical models were described as extrapolations from solutions of diffusion equation in different initial and boundary conditions imposed by pharmaceutical formulations. The diffusion equation was solved, using Laplace and Fourier transformed functions for the release kinetic from infinite reservoirs in a semi-infinite medium. Solutions represents a general square root law and can be applied for the release kinetic of fluorescein from monoglyceride colloidal liquid crystals. Akaike, Schwartz and Imbimbo criteria were used to establish the appropriate mathematical model and the hierarchy of performances of different models applied to the release experiments. The Fisher statistic test was applied to perform significance of differences among mathematical models. Differences evaluated by mathematical criteria demonstrated that small or no significant statistic differences were carried out between various applied models and colloidal formulations. Phenomenological models were preferred over to empirical and semi-empirical ones. The general square root model shows that the diffusion-controlled release of fluorescein is the mathematical models extrapolated for monoglyceride colloidal liquids, in the first part of the process.

The purposes of this study are to introduce the concept of Service Quality (SQ) in E-Supply Chain Management (E-SCM) and its impact on increasing Customer Satisfaction (CS) and provide insightful enhancements to the literature. In addition, the paper also examines the influence of SQ of E-SCM on CS in online shopping. After a comprehensive literature review, four key factors for measuring the E-Supply Chain (Process Control, Interaction with Supplier, Management Support, and Focus on Customers), four key factors for measuring CS (Informing Customers, Attention to Customers’ Needs, Staff Performance Accuracy, and Easy Access to Services), and four factors for measuring the quality of identification services (Assurance, Accountability, Tangibility and Reliability) were selected. The proposed conceptual model was then presented. This model was validated by data collected through a survey of 150 respondents in order to identify customer satisfaction, including that of customers of online websites in Iran. The sample data was analyzed using SPSS21, after which the interrelationships between the model and factors were examined based on the Partial Least Square-Structural (PLS). Model fit indices were then calculated for the dataset. The proposed model was validated using factor analysis and structural equation modeling techniques. The results indicated that E-SCM has a direct impact on CS. The effect of SQ was also confirmed. A positive and significant relationship was identified between E-SCM and CS, E-SCM and SQ, as well as SQ and CS (P> 0.05). The first limitation was to convince respondents to cooperate with the researchers. The second one was the lack of research-related background due to the subject being relatively new. This study, to the best of the authors’ knowledge, is the first empirical analysis on the CS assessment of SQ of E-Supply Chain in online shopping. This important link to online shopping has rarely been explored. It is expected that by filling this gap, this study will help in strengthening online shopping, which needs a change in the marketing area.

Escherichia coli or E. coli is a member of the fecal coliform group and is a more specific indicator of fecal contamination than other fecal coliform species, its presence indicate possibly presence of harmful bacteria which will cause diseases and it also suggests the extent as well as the nature of the contaminants. E. coli bacteria able to survive in water for 4 – 12 weeks and at present, it appears as an indicator to provide the accurate bacterial contamination of fecal matter in drinking water, because of the availability of simple, affordable, fast, sensitive and exact detection techniques. According to the laboratory experiment based techniques, 24 - 48 hours are required for the bacterial concentration to be reported. So, there is a necessity for continuous monitoring. Techniques for detection of many pathogenic bacterial strains are not yet available, sometimes days to weeks are required to get the results. To overcome the difficulties, expensive and time-consuming techniques are required to detect, count and identify the presence of specific bacterial strain. Public health relies on online monitoring of water quality that depends majorly on examination of fecal indicator bacteria, thus protection of health requires fecal pollution indicator so that it is not required to analyze drinking water to overcome the problems associated with waterborne diseases. This paper will brief the classification, sources, survival of E. coli bacteria and its correlation with basic water quality parameters in water sources.```

The greenhouse gases and air pollution generated by extensive energy use have exacerbated climate change. An electric-bus (e-bus) transportation system favors reducing pollution and carbon emissions. This study analyzed the minimization of construction costs for an all battery-swapping public e-bus transportation system. A simulation was conducted according to existing timetables and routes. Daytime charging was incorporated during the hours of operation; the two parameters of the daytime charging scheme were the residual battery capacity and battery-charging energy during various intervals of daytime peak electricity hours. The parameters were optimized using three algorithms: particle swarm optimization (PSO), a genetic algorithm (GA), and a PSO–GA. This study observed the effects of optimization on cost changes (e.g., number of e-buses, on-board battery capacity, number of extra batteries, charging facilities, and energy consumption) and compared the plug-in and battery-swapping e-bus systems. The results revealed that daytime charging can reduce the construction costs of both systems. In contrast to the other two algorithms, the PSO–GA yielded the most favorable optimization results for the charging scheme. Finally, according to the cases investigated and the parameters of this study, the construction cost of the plug-in e-bus system was lower than that of the battery-swapping e-bus system.

The purpose of this study is to find out the e-reputation management of the hotel industry, as well as the social media channels used as the tools of hotel e-reputation building. This study used a qualitative approach by analyzing the in-depth interviews with hotel marketing communication practitioners of 15 hotel companies in Bandung City. The findings identified that e-reputation is considered a crucial factor in determining hotel performance due to the change of customers’ behaviors today and identified also three types of e-reputation management activities implemented by hotel companies, such as online activities, offline activities, and online/offline activities. The results of this study have implications for the hospitality industry, as a reference for formulating their marketing strategies.

Multi-sensor data fusion of E-tongue and E-nose can provide a more comprehensive and more accurate analysis results. However, it also brings some redundant information, it is a hot issue to reduce the feature dimension for pattern recognition. In this paper, the taste-olfactory data fusion based on E-tongue and E-nose combined with Support Vector Machine (SVM) was used to classify five different beers. First, the taste and olfactory feature information were obtained based on E-tongue and E-nose. Second, the original feature data of single system were fused, then Principal Component Analysis (PCA) was applied to extract principal components, Genetic Algorithm-Partial Least Squares (GA-PLS) was used to select the characteristic variables, 20 subsets were generated with those variables based on the best Variable Importance of Projection (VIP) score. Finally, the classification models based on SVM were established, also c and g of SVM were calculated by Grid Search (GS), Genetic Algorithm (GA), and Particle Swarm Optimization (PSO), the classification results of all subsets were obtained. The results showed that the classification accuracy using data fusion was much higher over single E-tongue and single E-nose, and the variable selection method by VIP had the best classification performance in #12 subset coupled with GA-SVM.

Based on K-ε Standard Wall turbulence model (2-Equation) and Navier-Stokes (N-S) equations defined for incompressible fluids, fluid flow behaviour around hyperloop pods in an evacuated tube was simulated using ANSYS fluent solver assuming steady state and two dimensional conditions. In this research, to develop the case studies, using combination of different head and tail shape profile, four kind of hyperloop pods were developed with the aid of SolidWorks. These four pods have been investigated for their aerodynamic behaviour as four different case scenarios. The results of simulation depicts that an atmospheric pressure of 100 Pa with blockage ratio of 0.36 in tube provides the best possible aerodynamic behaviour for the designed hyperloop pod models. This research finds that overall aerodynamic behaviour of hyperloop pods can be varied by changing the head and tail shape profile of pods and a particular combination of head and tail shape profile can provide optimally best aerodynamic capabilities. Thus, this research paper provides a novel method of obtaining best aerodynamic capabilities in hyperloop pods by designing head profile optimally in combination with tail profile. This outcome will provide major contribution towards the development of hyperloop pods in future with better aerodynamic behaviour resulting in lesser electrical energy required to propel the hyperloop pods in evacuated tube.

In this short review paper we have assembled the main characteristics of partial oxidation reactions (oxidative dehydrogenation and selective oxidation to olefins or oxygenates, as aldehydes and carboxylic acids and nitriles), as well as total oxidation, particularly for depollution, environmental issues and wastewater treatments. Both gas-solid and liquid-solid media have been considered with recent and representative examples within these fields. We have also discussed about their potential and prospective industrial applications. Particular attention has been brought to new raw materials stemming from biomass and to liquid-solid catalysts cases. This review paper also summarizes the progresses made in the use of unconventional activation methods for performing oxidation reactions, highlighting the synergy of these technologies with heterogeneous catalysis. Focus has been centered on usual catalysts activation methods but also on less usual ones, such as the use of ultrasounds, microwaves, grinding (mechanochemistry) and photo-activated processes, as well as their combined use.

Rice is considered as the most important crop for most of the world population. Utilization of seaweed as bio-stimulant can be an alternative way to enhance rice plant growth and productivity, as well as a strategic move to reduce the use of inorganic fertilizer that is harmful to the environment. Seaweed and its derivative products have been widely used as bio-stimulant in the agricultural industry because of their potential use in increasing plant growth and productivity. Auxins, gibberellins, and cytokinin are some of growth regulators found in seaweed extract, as well as macro and micronutrients required for plant growth and development. Several studies have found that seaweed extract has a variety of favorable effects as a plant growth promoter, including early seed germination and establishment, improved nutritional quality, increased yield and crop performance, and increased tolerance to environmental stress. The purpose of this paper is to give a comprehensive overview of the impacts of several seaweed species on seed germination, crop development and production, enhancement of rice plants (Oryza sativa) nutritional quality and the modes of action of seaweed extract includes the chemical components that might be causing plant physiological changes.

The chiral optical Tamm state (COTS) is a special localized state at the interface of a handedness-preserving mirror and a structurally chiral medium such as a cholesteric liquid crystal or a chiral sculptured thin film. The spectral behavior of COTS, observed as reflection resonances, is described by the temporal coupled-mode theory. Mode coupling is different for two circular light polarizations because COTS has a helix structure replicating that of the cholesteric. The mode coupling for co-handed circularly polarized light exponentially attenuates with the cholesteric layer thickness since the COTS frequency falls into the stop band. Cross-handed circularly polarized light freely goes through the cholesteric layer and can excite COTS when reflected from the handedness-preserving mirror. The coupling in this case is proportional to anisotropy of the cholesteric and theoretically it is only anisotropy of magnetic permittivity that can ultimately cancel this coupling. These two couplings being equal results in a polarization crossover (the Kopp--Genack effect) for which a linear polarization is optimal to excite COTS. The corresponding cholesteric thickness and scattering matrix for COTS are generally described by simple expressions.

Circulating tumor cells (CTC) have shown to be prognostic in advanced colorectal cancer (advCRC), but their value for predicting response to treatment or as a source of molecular data is debated. We compared CellSearch® (Janssen Diagnostics, LLC) and IsoFlux^TM (Fluxion Biosciences Inc, South San Francisco, CA) systems for the enumeration of CTC in patients with newly diagnosed advCRC (group 1; n=34). Using castPCR^TM we studied KRAS status in CTC isolated with IsoFlux^TM and compared it with that of the primary tumor in patients from group 1 and in KRAS wild-type (KRAS^WT) patients with progressive disease (group 2; n=22). Median number of CTC detected with CellSearch® (groups 1 and 2) was 1 (range: 0-78) and with IsoFlux^TM (group 1) was 8 (range: 0-419), showing a modest correlation (r=0.345, P=0.036), which improved if lung metastases (r=0.805, P=0.016) or if lung and liver metastases were present (r=0.812, P=0.05). A Bland-Altman plot showed that the higher the number of CTC detected the larger the difference between both methods in favor of IsoFlux^TM. After a median follow-up since CTC collection of 16 months (range: 1-30) CellSearch® ≥ 3 CTC (HR 2.77, 95% CI 0.77-9.95) and IsoFlux^TM ≥ 11 CTC (HR 4.14, 95% CI 1.05-16.19) were established as the best cutoff points for predicting survival. Using castPCR^TM we found KRAS mutations in CTC in 4 out of 8 patients from group 1 and in 2 out of 3 patients from group 2. None of these mutations were found in the primary tumor using standard methods, possibly reflecting intratumor heterogeneity or treatment selection pressure. We conclude that IsoFlux^TM is more efficient than CellSearch® in the isolation of CTC in patients with advCRC, achieving, in a majority of cases, the established minimum of CTC for castPCR^TM-based genetic analyses.

The greater Wellington region, New Zealand, is highly vulnerable to large earthquakes because it is cut by active faults. Bulk water supply pipelines cross the Wellington Fault at several different locations, and there is considerable concern about severe disruption of the provision of reticulated water supplies to households and businesses in the aftermath of a large earthquake. A number of policy initiatives have been launched encouraging householders to install rainwater tanks to increase post-disaster resilience. However, little attention has been paid to potential health hazards associated with consumption of these supplies. To assess health hazards for householders in emergency situations, six 200-litre emergency water tanks were installed at properties across the Wellington region, with five tanks being allowed to fill with roof-collected rainwater and one tank being filled with municipal tapwater as a control. Such tanks are predominantly set aside for water storage, and once filled, feature limited drawdown and recharge. Sampling from these tanks was carried out fortnightly for one year, and samples analysed for E. coli, pH, conductivity, a range of major and trace elements, and organic compounds, enabling an assessment of the evolution of water chemistry in water storage tanks over time. Key findings were that the overall rate of E.coli detections in the rain-fed tanks was 17.7%, which is low in relation to other studies. We propose that low incidences of E.coli may be due to biocidal effects of high zinc concentrations in tanks, originating from unpainted galvanised steel roof cladding. Lead concentrations were high compared to other studies, with 69% of rain-fed tank samples exceeding the World Health Organisation’s health-based guideline of 0.01 mg/L. Further work is required to determine risks of short-term consumption of this water in emergency situations.

Deformation of the surface of diamagnetic liquid by magnetic field is called the “Moses Effect”. Physics and applications of the direct and inverse Moses effects are reviewed. Experimental techniques enabling visualization of the effects are surveyed. Impact of magnetic field on micro- and macroscopic properties of liquids is addressed. Influence of the surface tension on the shape of the near-surface dip formed in a diamagnetic liquid by magnetic field is reported. Floating of diamagnetic bodies driven by the Moses effect is treated. The effect of the “magnetic memory of water” in its relation to the Moses Effect is discussed. The dynamics of self-healing of near-surface dips due to the Moses Effect is considered.

In this work, we proposed a novel design of microfluidic mixer utilizing the amplified Marangoni chaotic advection induced by AC continuous electrowetting of a metal droplet situated in electrolyte solution, due to the linear and quadratic voltage-dependence of flow velocity at small or large voltages, respectively. Unlike previous researchers exploiting the unidirectional surface stress with DC bias at droplet/medium interface for pumping of electrolyte where the resulting flow rate is linearly proportional to the field intensity, dominance of another kind of dipolar flow pattern caused by local Marangoni stress at the drop surface in sufficiently intense AC electric field is demonstrated by both theoretical analysis and experimental observation, which exhibits a quadratic growth trend as a function of the applied voltage. The dipolar shear stress merely appears at larger voltages and greatly enhances the mixing performance by inducing chaotic advection between the neighboring laminar flow. The mixer design developed herein, on the basis of amplified Marangoni chaotic advection around a liquid metal droplet at larger AC voltages, has great potential for chemical reaction and MEMS actuator applications, because of generating high-throughput and excellent mixing performance at the same time.

Hepatitis E virus (HEV) is a common cause of acute hepatitis worldwide, accounting for approximately 25% of deaths among pregnant women. We previously reported that pregnancy serum facilitates HEV replication in vitro. However, the differences in host cells with HEV infection induced by pregnancy serum and fetal bovine serum (FBS) are unclear. In this study, differentially expressed proteins were identified in HEV-infected hepatoma cells (HepG2) supplemented with different sera by using isobaric tags for relative and absolute quantitation. Proteomic analysis indicated that HEV infection significantly induced 1014 differentially expressed proteins in HEV-infected HepG2 cells when supplemented with FBS compared with pregnancy serum. Further validation by Western blot confirmed that filamin A, heat-shock proteins 70 and 90, Cytochrome c, and Thioredoxin were associated with HEV infection. This comparative analysis provides an important basis to further investigate HEV pathogenesis in pregnant women and HEV replication.

The present study was aimed to evaluate the levels of oxidative stress markers in breast diseases by measuring the 8-hydoxy-2-deoxyguanosine (8-OHdG), vitamin A, vitamin C, vitamin E and total antioxidant status (TAS) alterations in relation to cell proliferation activity and disease progression. Significant increases in the level of oxidative damage marker 8-OHdG and cell proliferation activity were observed in breast carcinoma patients in comparison to benign and normal controls, which were accompanied by significant decrease in non enzymatic antioxidants and TAS concentrations. 8-OHdG and cell proliferation level were negatively correlated with non enzymatic antioxidants viz., Vitamin A, Vitamin C, vitamin E level and total antioxidant activity. Altered levels of biomarkers of oxidative stress and cell proliferation activity amongst the malignant, benign and controls suggest a correlation of increased oxidative stress and cell proliferation activity in the progression of disease in breast carcinoma patients. Among the oxidative stress markers and cell proliferation index, decreased level of vitamin A, vitamin C, vitamin E, TAS and increased level of 8-OHdG, cell proliferation index emerged as best predicted biomarkers for subjects with malignancy and benign breast disease.

With the development of information technology and the popularization of mobile devices, collecting various types of customer data such as purchase history or behavior patterns became possible. As the customer data being accumulated, there is a growing demand for personalized recommendation services that provide customized services to customers. Currently, global e-commerce companies offer personalized recommendation services to gain a sustainable competitive advantage. However, previous research on recommendation systems has consistently raised the issue that the accuracy of recommendation algorithms does not necessarily lead to the satisfaction of recommended service users. It also claims that customers are highly satisfied when the recommendation system recommends diverse items to them. In this study, we want to identify the factors that determine customer satisfaction when using the recommendation system which provides personalized services. To this end, we developed a recommendation system based on Deep Neural Networks (DNN) and measured the accuracy of recommendation service, the diversity of recommended items and customer satisfaction with the recommendation service. The experimental results of is the study showed that both recommendation system accuracy and diversity would have a positive effect on customer satisfaction. These results can further improve customer satisfaction with the recommendation system and promote the sustainable development of e-commerce.

Universitas Sebelas Maret (UNS) through SMART UNS Company has conducted research and development of e-motorcycle conversion using Li-ion battery pack as a substitute for ICE energy source from the conventional motorcycle. Currently, the battery-pack that used for e-motorcycle conversion is in the development phase towards commercialization. The challenge of estimating production costs is the complicated production process and storing hidden expenses that can be a problem. This hidden cost is often a missing or varied factor that costs less or more expensive. This study presents an integrated parametric cost estimation model with activity-based cost assignments to estimate production costs through cost calculations for each activity. Activity-based costs break the production process into a specific cost element for each step. Each activity's cost is put into a parametric cost estimation model to calculate the cost of each activity into the total cost of production. Cost estimation results will be analyzed using a regression method to determine which variables most affect the production cost of Li-ion battery packs for the conversion of e-motorcycles in the SMART UNS company.

There has been widespread criticism about the rates of participation of students enrolled on MOOCs (Massive Open Online Courses), more importantly, the percentage of students who actively consume course materials from beginning to the end. This study sought to investigate this trend by examining the factors that influence MOOC adoption and use by students in selected Ghanaian universities. The Unified Theory of Acceptance and Use of Technology (UTAUT) was extended to develop a research model. A survey was conducted with 270 questionnaires administered to students who had been assigned MOOCs; 204 questionnaires were retrieved for analysis. Findings of the study show that MOOC usage intention is influenced by computer self-efficacy, performance expectancy, and system quality. Results also showed that MOOC usage is influenced by facilitating conditions, instructional quality, and MOOC usage intention. Social influence and effort expectancy were found not to have a significant influence on MOOC usage intention. The authors conclude that universities must have structures and resources in place to promote the use of MOOCs by students. Computer skills training should also be part of the educational curriculum at all levels. MOOC designers must ensure good instructional quality by using the right pedagogical approaches and also ensure that the sites and learning materials are of good quality.

IgE-mediated wheat allergy is a gluten-related disorder. Wheat is one of the five most common food allergens in children. However, the natural history of IgE-mediated wheat allergy has seldom been described in the research literature. This study presents the current state of knowledge about the IgE-mediated wheat allergy in children.

The geometry of Poincare disk itself is interpreted without any mapping to dierent spaces. Our approach might be one of the shortest and is intended for educational contribution.

To improve carbon efficiency for urban logistics service system composed of a third-party logistics service provider (3PLs) and an e-business enterprise, low-carbon operation game between them was studied. Considering low carbon technology investment cost and sales expansion effect of low carbon level, profit functions for both players were constituted. Based on their different bargaining capabilities, totally 5 types of game scenarios were designed. Through analytical solution, Nash Equilibria under varied scenarios were obtained. By analyzing these equilibria, 4 major propositions were given, in which, some key variables and system performance index were compared. Results show that the best system yields could only be achieved under the fully cooperative situation; limited cooperation only for carbon emission reduction would not benefit the system performance improvement; E-business enterprise-leading game’s performance overtook 3PLs-leading ones.

Lectins are carbohydrate-interacting proteins playing a pivotal role in multiple physiological and developmental aspects of all organisms. They can specifically interact with different bacterial and viral pathogens through the carbohydrate-recognition domains (CRD). In addition, lectins are also of biotechnological interest because of their potential use as biosensor for capturing and identification of bacterial species. In this work, we have characterized the bacterial agglutination properties of three C-type lectins from the Lepidoptera Spodoptera exigua. One of these lectins, BLL2, was able to agglutinate cells from a broad range of bacterial species at an extremely low concentration, becoming a very interesting protein to be used as biosensor or other biotechnological applications involving bacterial capturing.

Dengue virus (DENV), the causative agent of dengue fever (DF), is one of the most important mosquito-borne viruses that can infect humans. Although much effort has been made on prevention and control of dengue, there are currently no anti-viral drugs or worldwide approved vaccines yet. In this study, we immunized six-week-old Balb/c mice with DNA vaccine candidates E and NS1-2a of DENV serotype 2 or the combination of them (E+NS1-2a) via an electroporation (EP)-assisted intramuscular gene delivery system and evaluated the immune response and protection. The highest specific antibody titres and cytokine levels secreted by splenocytes as well as the highest survival rate were observed in the E+NS1-2a group, followed by E group and NS1-2a group. Our data suggested that the combination of E and NS1-2a delivered by EP may be a superior preventive strategy against DENV.

Hypercytokinemia, or cytokine storm, is one of the severe complications of viral and bacterial infections, involving the release of abnormal amounts of cytokines, resulting in a massive inflammatory response. Cytokine storm is associated with COVID-19 and sepsis high mortality rate by developing epithelial dysfunction and coagulopathy, leading to thromboembolism and multiple organ dysfunction syndrome. The anticoagulant therapy is an important tactic to prevent thrombosis in sepsis and COVID-19, but recent data show the incompatibility of modern direct oral anticoagulants and antiviral agents. It seems relevant to develop dual-action drugs with antiviral and anticoagulant properties. At the same time it was shown that azolo[1,5-a]pyrimidines are heterocycles with a broad spectrum of antiviral activity. We have synthesized a new family of azolo[1,5-a]pyrimidines and their condensed polycyclic analogs by cyclocondensation reactions and direct CH-functionalization and studied their anticoagulant properties. Five compounds among 1,2,4-triazolo[1,5-a]pyrimidin-7-ones and 5-alkyl-1,3,4-thiadiazolo[3,2-a]purin-8-ones demonstrated higher anticoagulant activity than the reference drug, dabigatran etexilate. Antithrombin activity of lead compounds was confirmed using lipopolysaccharide (LPS) treated blood to mimic conditions of cytokine release syndrome. The studied compounds affected only the thrombin time value, reliably increasing it 6.5–15.2 times as compared to LPS-treated blood.

This article is an effort to scrutinize the role of Information Technology development in the chronological transformation of Urban Planning domain using the exploratory research approach. In this research, it is argued that the theoretical and practical understanding of Urban Planning should absorb and integrate the bright outcome of the rise of Information and Technology to foster congruent future urban development. The article addresses the trends of transformation in the urban planning domain through the myopic lens of the expansion of information and communications technology era followed by investigating the key drivers shaping the interaction between modern-day urban planning and information technology considering both the dark and bright sides into account.

The LiCl and LiNO₃ water solutions in the presence of small amounts of 3-helium have been investigated by means of multinuclear resonance spectroscopy. The resulting concentration dependences of the ³He, ^6,7Li⁺, ¹⁴NO₃^¯ and ³⁵Cl^¯ resonance radiofrequencies are reported in the infinite limit. This data along with new theoretical corrections of shielding lithium ions was analyzed by a known NMR relationship method. Consequently, the nuclear magnetic moments of ⁶Li and ⁷Li were established against that of the helium-3 dipole moment: μ(⁶Li)=+0.822046(5)μ_N and μ(⁷Li)=+3.256418(20)μ_N. The new results were shown to be very close to the previously obtained values of the (ABMR) atomic beam magnetic resonance method. This experiment proves that our helium method is well suited for establishing dipole moments from NMR measurements performed in water solutions. This technique is especially valuable when gaseous substances of the needed element are not available. All shielding constants of species present in water solutions are consistent with new nuclear magnetic moments and these taken as a reference. Both techniques – NMR and ABMR – give practically the same results providing that all shielding corrections are properly made.

E-commerce is a rapidly evolving global trend that is having a significant impact on consumer behavior and business strategies. Despite its growing impact, e-commerce adoption by Moroccan firms remains low and research on this topic in this context is scarce. This study aims to fill this gap by investigating the main determinants influencing e-commerce adoption by Moroccan firms. We use logit, probit, and conditional mixed process-probit models to identify the critical factors driving e-commerce adoption. Our results reveal five key findings. First, newer firms that are more open to innovation and change are more likely to adopt e-commerce. Second, firms with a higher proportion of highly educated employees are more likely to adopt e-commerce. Third, the digital skills of new employees do not directly influence the likelihood of e-commerce adoption. Fourth, being listed on digital platforms increases the likelihood of e-commerce adoption. Finally, there is a positive relationship between firms engaged in innovation activities and e-commerce adoption. These findings highlight the need for additional investment in promoting modern organizational practices, reskilling workers, and implementing advanced technologies to facilitate effective e-commerce integration among Moroccan SMEs. By addressing these challenges, Moroccan firms can harness the full potential of e-commerce and contribute to the country’s economic growth and digital transformation.

Azadirachta indica A. Juss (neem) extracts have been used in pharmaceutical applications as antitumor agents, due to their terpenes and phenolic compounds. To obtain extracts from neem leaves with potential antiproliferative effect, a sequential process of pressurized liquid extraction was carried out in a fixed bed extractor at 25 ºC and 100 bar, using hexane (SH), ethyl acetate (SEA) and then ethanol (SE) as solvents. An extraction using only ethanol (EE) was also conducted to compare the characteristics of the fractionated extracts. The results obtained by liquid chromatography-electrospray ionization mass spectrometry suggested the highest concentration of terpenes for SEA extract in comparison to SH, SE and EE extracts. Therefore, antiproliferative activity showed SEA extracts were the most efficient inhibitors to human tumor cells MCF-7, NCI-H460, HeLa, and HepG2 between all other extracts studied. However, hepatocellular normal cells were more resistant to SH, SEA, SE, and EE compared to malignant cells of breast, lung, hepatocellular, and cervical. Neem fractioned extracts obtained in the present study seem to be more selective for malignant cells compared to the normal cells.

We are calling for a paradigm shift in engineering education. In times of the Fourth Industrial Revolution (“4IR”), a myriad of potential changes is affecting all industrial sectors leading to increased ambiguity that makes it impossible to predict what lies ahead of us. Thus, incremental culture change in education is not an option any more. The vast majority of engineering education and training systems, having remained mostly static and underinvested in for decades, are largely inadequate for the new 4IR labor markets. Some positive developments in changing the direction of the engineering education sector can be observed. Novel approaches of engineering education already deliver distinctive, student centered curricular experiences within an integrated and unified educational approach. We must educate engineering students for a future whose main characteristics are volatility, uncertainty, complexity and ambiguity. Talent and skills gaps across all industries are poised to grow in the years to come. The authors promote an engineering curriculum that combine timeless didactic tradition, such as Socratic inquiry, project-based learning and first-principles thinking with novel elements (e.g. student centered active and e-learning by focusing on the case study and apprenticeship pedagogical methods) as well as a refocused engineering skillset and knowledge. These capabilities reinforce engineering students’ perceptions of the world and the subsequent decisions they make. This 4IR engineering curriculum will prepare engineering students to become curious engineers and excellent communicators better navigating increasingly complex multistakeholder ecosystems.

Vitamin A and E are important during pregnancy, the neonatal period, and childhood. The objective of this study was to assess whether maternal RRR-a-tocopherol supplementation affects serum and breast milk retinol. Serum was collected at baseline and twenty days later, and breast milk, at baseline, and on days 1, 7, and 20 after delivery. After the baseline serum collection, the supplemented group (n=16) received a single 400 IU of RRR-α-tocopherol. The control group (n=18) was only performed collections. Retinol and alpha tocopherol levels were determined by liquid chromatography. Serum retinol and alpha tocopherol at baseline and 20 days after delivery indicated proper vitamin A (> 20 µg/dL) and E (> 516 μg/dL) statuses in the control and supplemented groups (p > 0.05). Colostrum retinol levels on days 1 and 7 after delivery were significantly higher in the supplemented group (p = 0.018 and p = 0.012, respectively). Maternal vitamin E supplementation increased colostrum retinol by 52.23% and 111.2%, 24 hours and 7 days, respectively. However, retinol in mature milk did not differ between the groups (p > 0.05). In conclusion, the supplementation with 400 IU of RRR-α-tocopherol improved vitamin A bioavailability in breast milk.

In recent years information and communication technologies (ICT) play a significant role in all aspects of modern society and impact socioeconomic development in sectors as education, administration, business, medical care and agriculture. The benefits of such technologies in agriculture can be appreciated only if farmers use them. In order to predict and evaluate the adoption of these new technological tools, the technology acceptance model (TAM) can be a valid aid. The paper measures the potential acceptance of an e-learning tool designed for EU farmers and agricultural entrepreneurs. Starting from a literature review of the technology acceptance model, by analyzing the most commonly used external variables in the fields of e-learning, Agriculture, and Virtual reality, the analysis shows that computer self-efficacy, individual innovativeness, computer anxiety, perceived enjoyment, social norm, content and system quality, experience and facilitating conditions are the most common determinants addressing technology acceptance. Furthermore, findings evidenced that the external variables have a different impact on the two main beliefs of the TAM Model, Perceived Usefulness (PU) and Perceived Ease of Use (PEOU). This study is expected to bring theoretical support for academics when determining the variables to be included in TAM extensions.

Lipophilicity can be measured with different methods, such as Shake-Flask or liquid chromatography. HPLC presents the advantage of overcoming solubility issues and therefore extending the range of lipophilicity to high values. A specific HPLC method, called ELogD, had been developed 20 years ago on a C₁₆-amide stationary phase, enhancing hydrophobic and hydrogen bond interactions to mimic octanol-water partition. The emergence of novel stationary phases added to the need for a less complex mobile phase has led to the development of a new HPLC assay called alphaLogD, applicable to neutral and basic compounds at pH 7.4, that combines superficially porous particles, a high number of equilibriums between solutes and stationary phase, and results in a lower number of isocratic methods to determine the logk’_w at a higher throughput. Statistical studies have been run to successfully evaluate the alphaLogD method compared to the Shake-Flask method and to allow this lipophilicity measurement into the so-called Beyond-Rule-of-5-molecules space.

The aim of the study was to determine the possibility of suppression of the prostaglandin synthesis by new derivatives of N-phenylanthranilic acids; they inhibit the activity of the microsomal prostaglandin E synthase-1 (mPGES-1) enzyme using the method of a flexible molecular docking. For the docking studies the crystallographic structural models with high resolution from Protein Data Bank were used: mPGES-1 in the complex with glutathione (pdb code 4AL0). A flexible molecular docking was carried out using the Molecular Operating Environment (MOE) software package. According to the results of the docking studies four scoring functions were calculated (Affinity dG Scoring, Alpha HB Scoring, London dG Scoring, GBVI/WSA dG Scoring). The values of the scoring functions calculated indicate the thermodynamic probability and energy favorability of forming complexes between molecules of the substances under research and the specified receptor, in which arrangement of ligands in the active site of the receptor and residues of amino acids of side chains are of similar geometry and types of binding of the known inhibitors of mPGES-1 determined on the basis of the crystallographic studies.

Nowadays, the transparency of governments with respect to the sustainability of public services is a very interesting issue for stakeholders and academics. It has led to previous research and international organisations (EU, IMF, OECD, United Nations, IFAC, G-20, World Bank) to recommend promotion of the online dissemination of economic, social and environmental information. Based on previous studies about e-government and the influence of administrative cultures on governmental accountability, this paper seeks to identify political actions useful to improve the practices of transparency on economic, social and environmental sustainability in European local governments. We perform a comparative analysis of sustainability information published on the websites of 72 local governments in 10 European countries grouped into main three cultural contexts (Anglo-Saxon, Southern European and Nordic). Using international sustainability reporting guidelines, our results reveal significant differences in local government transparency in each context. The most transparent local governments are the Anglo-Saxon ones, followed by Southern European and Nordic governments. Based on individualized empirical results for each administrative style, our conclusions propose useful policy interventions to enhance sustainability transparency within each cultural tradition, such as development of legal rules on transparency and sustainability, tools to motivate local managers for online diffusion of sustainability information and analysis of information needs of stakeholders.

The novel coronavirus pneumonia epidemic is still raging around the world. Therefore, during the period of a global pandemic, maintaining the normal circulation of medicine and health fields is the key to fight against the epidemic. This paper based on relevant data such as the export volume of cross-border e-commerce in Hangzhou, China from 2015 to 2019, the article uses system dynamics modeling to explore the impact of overseas warehouse services on cross-border e-commerce export transactions. Studies have shown that the introduction of overseas warehouses has significantly improved customer satisfaction and improved the quality of cross-border logistics services, which has a positive impact on cross-border e-commerce export transactions. Through sensitivity analysis, it can be seen that under the same conditions, the efficiency of customs clearance has the greatest impact on overseas warehouse services. Therefore, when allocating various investments in overseas warehouses, you can favor the customs clearance process to enhance the competitiveness of the cross-border e-commerce market and provide a feasible experience for healthcare supplies export from cross-border e-commerce.

Introduction The prevalence of adolescent electronic cigarette (e-cigarette) use has increased in most countries. This study determines the relation between the frequency of e-cigarette use and the frequency and intensity of cigarette smoking. Furthermore, it evaluates the association between the reasons for e-cigarette use and the frequency of its use. Materials and Methods Participants were 68,043 middle and high school students aged 13–18 years from the 2015 Korean Youth Risk Behavior Web-Based Survey. Of the 68,043 participants, we analyzed 6,655 adolescents with an experience of e-cigarette use. Results The prevalence of ever using and current (past 30 days) use of e-cigarettes was 10.1% and 3.9%, respectively. Of the ever e-cigarette users, approximately 40% used e-cigarettes for ≥1/month and 8.1% used e-cigarettes daily. Daily e-cigarettes users were 10 times greater among daily cigarette smokers than among cigarette users for <1/month (18.1% vs. 1.8%) and 16 times more prevalent among those smoking ≥20 cigarettes/day than among those smoking <1 cigarette/month (38.9% vs. 2.4%). The most common reason for e-cigarette use was curiosity (22.9%), followed by less harmful than conventional cigarettes (18.9%), smoking cessation (13.1%), and indoor use (10.7%). Curiosity was the most common reason among less frequent e-cigarette users; however, smoking cessation and indoor use were the most common reasons among more frequent users. Conclusions Results showed a positive relation between frequency or intensity of conventional cigarette smoking and frequency of e-cigarette use among Korean adolescents, and frequency of e-cigarette use differed according to the reason for the use of e-cigarettes.

Modern electronic textiles are moving towards flexible wearable textiles, so-called e-textiles that have micro-electronic elements embedded onto the textile fabric that can be used for varied classes of functionalities. There are different methods of integrating rigid microelectronic components into/onto textiles for the development of smart textiles, which include, but are not limited to, physical, mechanical and chemical approaches. The integration systems must satisfy being flexible, lightweight, stretchable and washable to offer a superior usability, comfortability and non-intrusiveness. Furthermore, the resulting wearable garment needs to be breathable. In this review work, three levels of integration of the microelectronics into/onto the textile structures are discussed, the textile-adapted, the textile-integrated, and the textile-based integration. The textile-integrated and the textile- adapted e-textiles have failed to efficiently meet being flexible and washable. To overcome the above problems, researchers studied the integration of microelectronics into/onto textile at fiber or yarn level applying various mechanisms. Hence, a new method of integration, textile-based, has risen to the challenge due to the flexibility and washability advantages of the ultimate product. In general, the aim of this review is to provide a complete overview of the different interconnection methods of electronic components into/onto textile substrate.

There is much interest in effective copper chelators to correct copper dyshomeostasis in neurodegenerative and oncological diseases. In this study, a recombinant fusion protein for expression in E. coli cells was constructed from glutathione-S-transferase (GST) and the N-terminal domain (ectodomain) of human high affinity copper transporter CTR1 (hNdCTR1), which has three metal-bound motifs. Several biological properties of the GST-hNdCTR1 fusion protein were assessed. It was demonstrated that in cells, the protein was prone to oligomerization, formed inclusion bodies and displayed no toxicity. Treatment of E. coli cells with copper and silver ions reduced cell viability in a dose- and time-dependent manner. Cells expressing GST-hNdCTR1 protein demonstrated resistance to the metal treatments. These cells accumulated silver ions and formed nanoparticles that contained AgCl and Ag0. In this bacterial population, filamentous bacteria with length about 10 μm were often observed. The possibility for the fusion protein carrying extracellular metal binding motifs to integrate into the cell’s copper metabolism and its chelating properties are discussed.

Vitamin D has previously been quantified in some plants and algae, particularly in leaves of the Solanaceae family. We measured the vitamin D content of Australian native food plants and Australian-grown edible seaweed. Using liquid chromatography with triple quadrupole mass spectrometry, 13 samples (including leaf, fruit and seed) were analysed in duplicate for vitamin D₂, vitamin D₃, 25-hydroxyvitamin D₂ and 25-hydroxyvitamin D₃. Five samples contained vitamin D₂: raw wattleseed (Acacia victoriae) (0.03 µg/100 g dry weight (DW)); fresh and dried lemon myrtle (Backhousia citriodora) leaves (0.03 and 0.24 µg/100 g DW, respectively); dried leaves and berries of Tasmanian mountain pepper (Tasmannia lanceolata) (0.67 and 0.05 µg/100 g DW, respectively). Fresh kombu (Lessonia corrugata) contained vitamin D₃ (0.01 µg/100 g DW). Detected amounts were low; however, it is possible that exposure to ultraviolet radiation may increase the vitamin D content of plants and algae if vitamin D precursors are present.

Mungbean [Vigna radiata (L.) Wilczek] in Australia has been transformed from a niche opportunistic crop into a major summer cropping option for dryland growers in the summer-dominant rainfall regions of Queensland and New South Wales. This transformation followed stepwise genetic improvements in both grain yields and disease resistance. For example, more recent cultivars such as ‘Crystal’, ‘Satin II’ and ‘Jade-AU‘ have provided up to a 20% yield advantage over initial introductions. Improved agronomic management to enable mechanised management and cultivation in narrow (<50 cm) rows has further promised to increase yields. Nevertheless, average yields achieved by growers for their mungbean crops remain less than 1 t/ha, and are much more variable than other broad acre crops. Further increases in yield and crop resilience in mungbean are vital. In this review, opportunities to improve mungbean have been analysed at four key levels including phenology, leaf area development, dry matter accumulation and its partitioning into grain yield. Improving the prediction of phenology in mungbean may provide further scope for genetic improvements that better match crop duration to the characteristics of target environments. There is also scope to improve grain yields by increasing dry matter production through the development of more efficient leaf canopies. This may introduce additional production risks as dry matter production depends on the amount of available water, which varies considerably within and across growing regions in Australia. Improving crop yields by exploiting photo-thermal sensitivities to increase dry matter is likely a less risky strategy for these variable environments. Improved characterisation of growing environments using modelling approaches could also better define and identify the risks of major abiotic constraints. This would assist in optimising breeding and management strategies to increase grain yield and crop resilience in mungbean for the benefit of growers and industry.

The contents of Education for Sustainable Development (ESD) should be included in teachers’ initial and advanced training programs. In order to determine the key competences for sustainability, creating a Sustainable Consciousness is one of the main foundations. However, there are not many empirical studies that deal with consciousness from education. In this context, e-portfolio appears as a tool that promotes reflection and critical thinking, key competences for consciousness development. This work intends to propose a categorization system to extract types of consciousness and identify trainee teachers’ levels of consciousness. For this research work, of an eminently qualitative nature, we have selected twenty-five portfolios of students in the last year of the School of Education at the University of Macerata (Italy). The qualitative methodological procedure followed allowed to deduce three bases that shape trainee teachers’ consciousness: thinking, representation of reality and type of consciousness. We concluded that the attainment of a Sustainable Consciousness in teachers requires activating and developing higher levels of thinking, as well as a projective and macrostructural representation of reality.

A simple model has been used to investigate the nature of chemical order in Na-Pb and Na-Hg liquid binary alloy at 700K and 673K respectively. The energy parameter obtained from the model was used to calculate the concentration dependent mixing properties such as Gibb’s free energy of mixing, Concentration fluctuations in the long wavelength limit and the Warren-Cowley chemical short range order parameter. Results obtained showed that both alloys are hetero-coordinated throughout the entire concentration and there is tendency for segregation and demixing to take place in the liquid alloys. We observed that Na-Hg liquid alloy is more strongly interacting binary alloy and chemically ordered than Na-Pb liquid alloy.

Educational data-mining is an evolving discipline that focuses on the improvement of self-learning and adaptive methods. It is used for finding hidden patterns or intrinsic structures of educational data. In the arena of education, the heterogeneous data is involved and continuously growing in the paradigm of big-data. To extract meaningful information adaptively from big educational data, some specific data mining techniques are needed. This paper presents a clustering approach to partition students into different groups or clusters based on their learning behavior. Furthermore, personalized e-learning system architecture is also presented which detects and responds teaching contents according to the students’ learning capabilities. The primary objective includes the discovery of optimal settings, in which learners can improve their learning capabilities. Moreover, the administration can find essential hidden patterns to bring the effective reforms in the existing system. The clustering methods K-Means, K-Medoids, Density-based Spatial Clustering of Applications with Noise, Agglomerative Hierarchical Cluster Tree and Clustering by Fast Search and Finding of Density Peaks via Heat Diffusion (CFSFDP-HD) are analyzed using educational data mining. It is observed that more robust results can be achieved by the replacement of existing methods with CFSFDP-HD. The data mining techniques are equally effective to analyze the big data to make education systems vigorous.

Three-dimensional graphene (3DG) sponge has attracted increasing attention because it combines the unique properties of cellular materials and the excellent performance of graphene. The preparation of 3DG sponge depends mainly on the self-assembly of graphene oxide sheets. Here, we demonstrate facile fabrication of 3DG sponge with a large-scale and ordered porous structure, exploiting the liquid crystals of large graphene oxide (LGO) and ultralarge graphene oxide (ULGO) sheets. The resulting materials exhibit a low density, high porosity and elasticity. Our work explores a new strategy for organizing the ordered alignment of controlled large GO sheets and exploring the relationship between the microstructures and mechanical properties of 3DG sponge.

This article aims to provide a comprehensive understanding of vaping from various perspectives that contributes to the origin, development, achievement, and consequences of the greed of e-cigarette manufacturers. In our analysis, multiple elements of the social landscape, including economic, cultural, moral, psychological, and philosophical dimensions, contributed to the origin and development of the vaping greed and shaped people’s behaviors. Further discussion was made on how the specific characteristics of e-cigarette products and the marketing strategies of the companies, especially social media marketing, fostered the growth of such greed. Through interviews, we have also discussed the unfolding of this greed within the community of teenage vapers. The growth of the vaping greed was manifested in the large market share taken by the companies, but these all significantly harm people’s health and the communities. Nicotine and other chemicals in e-liquids promote each other’s negative effects in the mechanism leading to pulmonary symptoms and addiction, which are not limited to the physical level. We described that addiction could be transgenerational and can induce trauma both at an individual level and a community level. Overall, the greed of the vaping industry is a very complex system. The treatment of the greed shall be complicated as well: Besides the public health measures taken to treat the symptoms of the greed, we should educate individuals to be aware of their unfulfilled needs to regain authenticity and establish an infallible authority to enforce universal morality, which eradicates the complications of addiction and the root of the capitalists’ greed, respectively.

The World Health Organisation declared Covid-19 as a pandemic on 11th March 2020. The main approach to tackle Covid-19 worldwide is to screen and provide supportive care to patients. For screening purpose RT-qPCR based test are used as an initial detections assay. The test is expensive, time consuming and not suitable for mass scale screening/ confirmation requirement. A recent advancement is development of Immunoassay procedures (liquid Phase tests or bed side 10-20minute strip test). In order to help and accelerate bringing life to normal after lock down, Pakistan is in dire need to develop and adopt the immunoassay procedures for mass scale screening and confirmation of COVID-19 infection. It is cheap and easy to perform without a lab requirement.

This research assess the effects of training program based on the usage of the digital learning objects in teaching practice at the Northern Borders University staff. E Assessment through the tablets and smart phones and the teachers’ attitudes towards such way of evaluation is the major objective of this study as the researcher expects that the assessment mechanism in the university through utilization of tablets and smart phones and its application will inevitably bring in a systematic improvement in the assessment and evaluation process of the curricula. Moreover, making use of the e learning objects in training will make a significant change in e training program of the university. Hence, the researcher has chosen voluntary random samples from the university teaching staff (men\women) from various different faculties (medicine, medical sciences, science, education and arts, business administration, home economics, and science and literature). These samples included 300 members of the teaching staff. In a group of 20 to 25 members, a personal training was conducted regarding the usage of tablets and smart phones and its applications in the assessment process. Each group participated by producing a complete e-assessment for their students in the Northern Borders University and by the e learning system i.e. Blackboard and Question Mark. The research also depends on the semi-experimental design of multiple groups and on testing the groups’ pre and post achievement tests. In addition, the research identifies the level of the university teaching staff in using the tablets and the smartphones and its applications in the assessment process by the note card that the individuals have during the test.

The alkylation of 1,1,2-trimethyl-1H-benzo[e]indole with 2-chloroacetamide, followed by work-up of the reaction mixture with a base and the subsequent treatment of a crude product with acetic acid gives 10a,11,11-trimethyl-10a,11-dihydro-8H-benzo[e]imidazo[1,2-a]indol-9(10H)-one. The structure assignments were based on data from ¹H, ¹³C and ¹⁵N NMR spectroscopy. The optical properties of the obtained compound were studied by UV-vis and fluorescence spectroscopy.

Wound infections evidently appeared in times of World War I that accounted a significant mortality and morbidity rate among injured soldiers. Currently, around 11 million people worldwide require medical treatment for wound infections and 300,000 die every year due to untreated wound infection. The extensive use of antibiotics to treat wound infection leads to emerging new microbial strains that are resistant to many antibiotics. There is a growing concern on the emergence and re-emergence of drug-resistant pathogens such as multi-resistant bacterial strains. Hence, the development of new antimicrobial compounds or the modification of those that already exist to improve antibacterial activity is a high priority area of research. During the past few decades, nanotechnology has arisen with new promising technology for synthesis of nanobiomaterials. Metallic nanoparticles (NPs) are considered as new alternative treatment with superior antibacterial activity. In this study, new formulation of titanium oxide (TiO2) NPs with different sizes were synthesized and characterized. Genotoxicity, mutagenicity and antibacterial activities of TiO2 NPs against the causative agents of wound infection were investigated. Antibacterial activity of TiO2 NPs was conducted against three ATCC ® bacterial strains: methicillin-resistant Staphylococcus aureus (MRSA), Escherichia coli and Pseudomonas aeruginosa. The results clearly illustrate a superior antibacterial activity of all newly formulated TiO2 NPs against the most causative agents of wound infection. Most of our TiO2 NPs showed non-genotoxic and non-mutagenic results at the maximum concentrations. Findings of this study will enhance the future of the therapeutic strategies against the resistant pathogenic strains that cause wound infections.

Liquid propellants are fast becoming attractive for pulsed plasma thrusters due to their high efficiency and low contamination issues. However, the complete plasma interaction and acceleration processes are still not very clear. Present paper develops a multi-layer numerical model for liquid propellant PPTs. The model proposes a possible acceleration mechanism for liquid fed pulsed plasma thrusters and accurately predicts the propellant utilization capabilities and estimations for the fraction of propellant gas that is completely ionized and accelerated to high exit velocities. Validation of the numerical model and the assumptions on which the model is based on is achieved by comparing the experimental results from two different liquid-fed thrusters developed at the University of Tokyo. Results show 50% of liquid propellant injected is completely ionized and accelerated to high exit velocities (> 50Km/s), whereas, neutral gas contribute to only 7% of the total specific impulse and accelerated to low exit velocity (< 4Km/s). The model shows an accuracy up-to 92%. Optimization methods are briefly discussed to ensure efficient propellant utilization and performance. The model acts as a tool to understand the background physics and to optimize the performance for liquid-fed PPTs.

The protection of electronics against environmental influences and mechanical loads is important for integration of conventional electronics in textile conductive tapes. For this purpose, the sensors on the tapes are molded with plastic locally. This process step is recognized in the injection molding process. The molding compound is then later selected depending on: The field of application, the parameters of the manufacturing process and the textile tape properties. We have designed a mould for liquid silicone (LSR) as well as for the textile and electronic insertions. The cavities are sealed by a local compression of the textile and the two inserts are positioned with position pins representing the main aspect of the mould design. The sampling tool and the process parameter optimization are mainly based on the material properties of the silicone and the mechanical sensitivity of the inserts. To reduce the deformation of the circuit boards by the melt front and ensuring the functionality of the electronics a low-pressure process is used.

This year marks the 20th anniversary of the discovery that proteins with various cellular functions can be temporarily immobilized in the nucleolus, a process known as nucleolar sequestration. This review reflects on the progress made to understand the physiological roles of nucleolar sequestration and the mechanisms involved in protein immobilization. We discuss how nucleolar sequestration consists of a highly choreographed amyloidogenic liquid-to-solid phase transition that converts the nucleolus into Amyloid bodies (A-bodies). The study of solid condensates A-bodies will offer unique perspectives on cellular assembly of membrane-less compartments and provide alternative insights on pathological amyloidogenesis involved in neurological disorders.

Pseudomonas aeruginosa is an emerging opportunistic pathogen responsible for cystic fibrosis and nosocomial infections. In addition, empirical treatments are become inefficient due to their multiple-antibiotic resistance and extensive colonizing ability. Quorum sensing (QS) plays a vital role in the regulation of virulence factors in P. aeruginosa. Attenuation of virulence by QS inhibition could be an alternative and effective approach to control infections. Therefore, we sought to discover new QS inhibitors (QSIs) against LasR receptor in P. aeruginosa using chemoinformatics. Initially, a structure-based high-throughput virtual screening was performed using the LasR active site that identified 61404 relevant molecules. E-pharmacophore (ADAHH) screening of these molecules rendered 72 QSI candidates. In standard-precision docking, only 7 compounds were found as potential QSIs due to their higher binding affinity to LasR receptor (-7.53 to -10.32 kcal/mol compared to -7.43 kcal/mol of native ligands). The ADMET properties of these compounds were suitable to be QSIs. Later, extra-precision docking and binding energy calculation suggested ZINC19765885 and ZINC72387263 as the most promising QSIs. The dynamic simulation of the docked complexes showed good binding stability and molecular interactions. The current study suggested that these two compounds could be used in P. aeruginosa QS inhibition to combat bacterial infections.

Electronic-health applications rely on large computer networks to facilitate patients' information access and to communicate various types of medical data. To examine the effectiveness of these networks, the traffic parameters need to be analysed. Due to quantity of the information carrying packets, examining each packet's transmission parameters individually is not practical, especially when a real time operation is needed. Sampling allows a subset of packets that accurately represents the original traffic to be formed. In this study an adaptive sampling method based on regression and fuzzy inference system was developed. It dynamically updates the number of packets sampled by responding to the traffic variations. Its performance was found to be superior to the conventional non-adaptive sampling methods.

Numerous goods and services are now offered through online platforms due to the recent growth of online transactions like e-commerce. Users have trouble locating the product that best suits them from the numerous products available in online shopping. Many studies in deep learning-based recommender systems (RSs) have focused on the intricate relationships between the attributes of users and items. Deep learning techniques have used consumer or item-related traits to improve the quality of personalized recommender systems in many areas, such as tourism, news, and e-commerce. Various companies, primarily e-commerce, utilize sentiment analysis to enhance product quality and effectively navigate today's business environment. Customer feedback regarding a product is gathered through sentiment analysis, which uses contextual data to split it into separate polarities. The explosive rise of the e-commerce industry has resulted in a large body of literature on e-commerce from different perspectives. Researchers have made an effort to categorize the recommended future possibilities for e-commerce study as the field has grown. There are several challenges in e-commerce, such as fake reviews, frequency of user reviews, advertisement click fraud, and code-mixing. In this review, we introduce an overview of the preliminary design for e-commerce. Second, the concept of deep learning, e-commerce, and sentiment analysis are discussed. Third, we represent different versions of the commercial dataset. Finally, we explain various difficulties facing RS and future research directions.

Pneumatic nebulizers (as variations based on the Collison nebulizer) have been widely used for producing fine aerosol droplets from a liquid material. The basic working principle of those nebulizers has been qualitatively described as utilization of the negative pressure associated with an expanding gas jet to syphon liquid into the jet stream, then to blow and shear into liquid sheets, filaments, and eventually droplets. Detailed quantitative analysis based on fluid mechanics theory is desirable, to gain in-depth understanding of the liquid aspiration mechanism among other aspects of the Collison nebulizer behaviour. The purpose of present work is to investigate the nature of negative pressure distribution associated with compressible gas jet flow in the Collison nebulizer by a computational fluid dynamics (CFD) analysis, using an OpenFOAM® compressible flow solver. The value of the negative pressure associated with a gas jet flow is examined by varying geometric parameters of the jet expansion channel adjacent to the outlet of jet orifice. Such an analysis can provide valuable insights into fundamental mechanisms for liquid aspiration, helpful for designing improved pneumatic atomizer in the Aerosol Jet® direct-write system for micro-feature, high-aspect-ratio material deposition

Background: Serious games are conceptualized as a broad topic and overlap segments of more modern forms of education: e-learning, edutainment, game-based learning, and digital game-based learning. Serious Games aligns with digitalization and the modern era and creates novel opportunities for learning and assessment in medical education. Escape rooms, a type of serious games, merge mental and physical aspects to reinforce critical skills useful in daily life. It challenges logic and reasoning and demands careful analysis of situations to correlate and solve different stages of the escape room under pressurized, timed conditions. Furthermore, it serves as an adequate environment to build problem-solving skills, communication skills, and leadership skills through the collaboration of people to achieve a common goal. The aim of this study was to investigate the applications of escape rooms in Medical Education. Method: This study investigated the applications of escape rooms in medical education. Serious games are expanding in education and have attained great relevance due to their intriguing and intrinsically motivating attributes. Within serious games, we focused on escape rooms in which participants are locked in a room, faced with puzzles that must be solved to ‘escape the room’. Compiling the data from the first 100 hits of medical application of escape rooms, we found 72 cases and categorized them by year, specialty, participants structure, simulation experience, and design. Results: We reported on escape rooms in medical education by the year in which they were reported, the medical specialty, the participant structure, grouped or individual, the experience design; real, hybrid, or digital, and the modality of the delivery. 72% of the escape rooms focused on four main areas: nursing education (25.0%), emergency medicine (22.2%), pharmacy (12.5%), and interprofessional education (12.5%). Most of the escape rooms had a group-based physical design and little attention was given to provide a detailed description of the design considerations, such as the pathway type (linear, semi-linear, open). Conclusion: Escape rooms are applied in a wide range of medical education areas. In Medical Education, group-based on-site escape rooms with a focus on nursing, emergency medicine, pharmacy and interprofessional education dominates the implementation landscape. To further advance the field, stronger emphasis on making explicit the design considerations will advance the research and inform implementations.

This paper reports a novel fabric phase sorptive extraction-high performance liquid chromatography-ultra violet detection (FPSE-HPLC-UV) method for the simultaneous extraction and analysis of four phenyltin derivatives that include triphenyltin hydroxide, triphenyltin acetate, triphenyltin chloride and tetraphenyltin in environmental water (agricultural waste water and municipal waste water) and canned food samples. The selected analytes were well resolved by Waters Nova pack C18 column (3.9 x 150 mm, 4 µm particle size) in isocratic elution mode within 15 minutes. The new microextraction media has been analytically evaluated using phenyltin derivatives as model compounds. The factors affecting the extraction efficiency of FPSE have been evaluated and the optimum extraction conditions were determined. Under these optimum conditions, the limits of detection (LODs) for sol-gel C18 coated fabric phase sorptive extraction (FPSE) media in combination with HPLC-UV for the analysis of the phenyltin derivatives were in the range of 10-100 ng/mL with high precision (low relative standard deviation) at 10 ng/mL concentration with good absolute recoveries. To the best of our knowledge, this is the first FPSE extraction procedure applied to environmental water and canned food samples for the simultaneous determination of phenyltin derivatives and could be readily adopted as a rapid and robust green analytical tool for routine environmental and food analytical laboratories.

A significant attention has been made to the accurate detection of diabetes which is a big challenge for the research community to develop a diagnosis system to detect diabetes in a successful way in the IoT e-healthcare environment. Internet of Things (IOT) has emerging role in healthcare services which delivers a system to analyze the medical data for diagnosis of diseases applied data mining methods. The existing diagnosis systems have some drawbacks, such as high computation time, and low prediction accuracy. To handle these issues, we have proposed a IOT based diagnosis system using machine learning methods, such as preprocessing of data, feature selection, and classification for the detection of diabetes disease in e- healthcare environment. Model validation and performance evaluation metrics have been used to check the validity of the proposed system. We have proposed a filter method based on the Decision Tree (Iterative Dichotomiser 3) algorithm for highly important feature selection. Two ensemble learning Decision Tree algorithms, such as Ada Boost and Random Forest are also used for feature selection and compared the classifier performance with wrapper based feature selection algorithms also. Machine learning classifier Decision Tree has been used for the classification of healthy and diabetic subjects. The experimental results show that the Decision Tree algorithm based on selected features improves the classification performance of the predictive model and achieved optimal accuracy. Additionally, the proposed system performance is high as compared to the previous state-of-the-art methods. High performance of the proposed method is due to the different combinations of selected features set and GL, DPF, and BMI are more significantly important features in the dataset for prediction of diabetes disease. Furthermore, the experimental results statistical analysis demonstrated that the proposed method would be effectively detected diabetes disease and can easily be deployed in IOT wireless sensor technologies based e-healthcare environment.

Internal and mesoscopic variables differ from each other fundamentally: both are state space variables, but mesoscopic variables are additional equipped with a distribution function introducing a statistical item into consideration which is missing in connection with internal variables. Thus, the alignment tensor of liquid crystal theory can be introduced as an internal variable or as one generated by a mesoscopic background using the microscopic director as mesoscopic variable. Because the mesoscopic variable is part of the state space, the corresponding balance equations change into mesoscopic balances, and additionally an evolution equation of the mesoscopic distribution function appears. The flexibility of the mesoscopic concept is not only demonstrated for liquid crystals, but is also discussed for dipolar media and flexible fibers.

Analyzing the cells in various body fluids can greatly deepen the understanding of the mechanisms governing the cellular physiology. Because of the variability of physiological and metabolic states, it is important to be able to perform such studies on individual cells. Therefore, we developed an optofluidic system in which we precisely manipulated and monitored individual cells of Escherichia coli. We used laser tweezers Raman spectroscopy (LTRS) in a microchamber chip to manipulate and analyze individual E. coli cells. We subjected the cells to antibiotic cefotaxime, and we observed the changes by the time-lapse microscopy and Raman spectroscopy. We found observable changes in the cellular morphology (cell elongation) and in Raman spectra, which were consistent with other recently published observations. We tested the capabilities of the optofluidic system and found it to be a reliable and versatile solution for this class of microbiological experiments.

Reciprocal Personal/Public Protection (RPPP) featured with source control is introduced, Mask Discriminating Mouth and Nose (MDMN) is employed to serve the purpose, which includes polymer based mouth cover with optional nose cover. The new knowledge that mouth is a primary, active and dominant source of the virus has been well established, which is the base of MDMN. Source classification and related source control tools are discussed, mouth cover is recommended as the tool prioritized to use. Liquid droplets is identified as a hard issue related to mask, liquid droplets, mask fitting, comfort and facial recognition constitute real challenges of mask in addition to efficiency, All of these have been addressed with MDMN. Comparisons between MDMN and masks/face covering are taken on four aspects: efficiency and efficacy, tolerance and comfort, cost and waste, and civil rights and public interest. Mouth cover is recommended to replace the face covering and act as both a personal tool and a public utensil, mouth cover with nose cover can provide better protection than N95 etc. RPPP with MDMN, could be an alternative for lockdown, a parallel strategy to vaccine, and a collectively living way during the pandemic era. MDMN, featured with high efficiency protection, high degree comfort, easy wearing, tight-fitting, easy facial recognition & communication, reusability, cost-effective, environment friendly and scale manufacturing more readily and widely etc., is a simple and sustainable solution, which is essential for ordinary people to keep wearing it properly for protection.

The history of health records (later also called medical records), including ones regarding individual patients, is thousands of years old. It finds it roots in the first ancient civilisations. Up until the 19^th century the records’ purpose was mainly an educational one. In the 19^th and 20^th century they started becoming significant in other roles as well, including those not strictly limited to medicine. In particular, to account for medical procedures, insurance proceeds or legal action. Currently we are living in a revolutionary era when it comes to health records, in which their character has changed from a “paper-based” to an electronic one. This paper presents the development of health records from the ancient to modern times, mainly in Europe and North America. Other cultures and civilisations, including China and India, are not discussed. An analysis of available sources was conducted, inter alia digital versions of manuscripts up to hundreds of years old. The analysis was based on PubMed and Google Scholar (several key words, all the available sources). Sources published in non-international languages (e.g. Dutch) were also investigated. Overall, approximately 600 articles were analysed, 158 of which were used and cited in this paper. The conclusions drawn from the analysis are as follows: (1) Health records, priorly used mostly for educational purposes, for about 100 years now have acquired a fully formal status. (2) We are currently facing the most revolutionary changes regarding the transformation of paper-based records into electronic ones. (3) The consequences of this process include systematic applications of solutions within the area of e-health, which allow us to make medical services more flexible, improve the health of individual patients and entire populations and potentially limit expenditure. (4) In the light of the ongoing COVID-19 pandemic, introducing electronic health records could be beneficial in terms of limiting the potential sources of contamination (physical copies of health records), saving time and resources, and improving the network of communication between medical centres.

The release profiles of methotrexate, an anticancer drug, from the monoolein liquid crystalline cubic phases were studied. The cubic phases were used either in the form of a lipidic film deposited onto a glassy carbon electrode surface or in the dispersed form of magnetocubosomes, which are considered a prospective hybrid drug delivery system. Commonly, cubosomes or liposomes are employed, but not in the case of toxic methotrexate, known to block receptors responsible for folate transport into the cells. The release profiles of the drug from the lipidic films were monitored electrochemically and described using the Higuchi model. They were also modified via changes in temperature; the release was faster, although deviating from the model when the temperature was increased. Magnetocubosomes - cubic phase nanoparticles containing hydrophobic magnetic nanoparticles placed in an alternating magnetic field of low frequency and amplitude, stimulated drug release from the suspension, which was monitored spectroscopically. These new biocompatible hybrid materials are very promising, allowing to control the release of the drug at the appropriate sites, but do require further investigations into their in vitro cytotoxicity and in vivo biodistribution.

Interviews from strength and conditioning coaches across all levels of athletic competition identified their two biggest concerns with the current state of wearable technology: (a) the lack of solutions that accurately capture data "from the ground up" and (b) the lack of trust due to inconsistent measurements. The purpose of this research is to investigate the use of liquid metal sensors, specifically Liquid Wire sensors, as a potential solution for accurately capturing ankle complex movements such as plantar flexion, dorsiflexion, inversion, and eversion. Sensor stretch linearity was validated using a Micro-Ohm Meter and a Wheatstone bridge circuit. Sensors made from different substrates were also tested and discovered to be linear at multiple temperatures. An ankle complex model and computing unit for measuring resistance values were developed to determine sensor output based on simulated plantar flexion movement. The sensors were found to have a significant relationship between the positional change and the resistance values for plantar flexion movement. The results of the study ultimately confirm the researchers' hypothesis that liquid metal sensors, and Liquid Wire sensors specifically, can serve as a mitigating substitute for inertial measurement unit (IMU) based solutions that attempt to capture specific joint angles and movements.

Abstract: The human race has always innovated, and in a relatively short time went from building fires and making stone-tipped arrows to creating smartphone apps and autonomous robots. Today, technological progress will undoubtedly continue to change the way we work, live, and survive in the coming decades. Since the beginning of the new millennium, the world has witnessed the emergence of social media, smartphones, self-driving cars, and autonomous flying vehicles. There have also been huge leaps in energy storage, artificial intelligence, and medical science. We are facing immense challenges in global warming and food security, among many other issues. While human innovation has contributed to many of the problems we are facing, it is also human innovation and ingenuity that can help humanity deal with these issues “New directions in science are launched by new tools much more often than by new concepts. The effect of a concept-driven revolution is to explain old things in new ways. The effect of a tool-driven revolution is to discover new things that have to be explained”. (F. Dyson, 1997 In this article, we review the impact of technology as evolving at beginning of 21st Century on future prospect of Energy demand either renewable or non-renewable form, Economy, to Ecommerce, Education and any other E-related of Modern Technology.

Thin Slab Casting and Directing Rolling (TSCDR) has become a major process for flat- rolled production. However, the elimination of slab reheating and limited number of thermomechanical deformation passes leave fewer opportunities for austenite grain refinement resulting in some large grains persist in the final microstructure. In order to achieve excellent Ductile to Brittle Transaction (DBTT) and Drop Weight Tear Test (DWTT) properties in thicker gauge high strength low alloy products, it is necessary to control austenite grain coarsening prior to the onset of thermomechanical processing. This contribution proposes a suite of methods to refine the austenite grain from both theoretical and practical perspective including: increasing cooling rate during casting, liquid core reduction, increasing austenite nucleation sites during the delta ferrite to austenite phase transformation, controlling holding furnace temperature and time to avoid austenite coarsening, and producing new alloy with two phase pinning to arrest grain coarsening. These methodologies can not only refine austenite grain size in the slab center, but also improve the slab homogeneity.

As novel materials for carbon capture, phase change solvents can separate into two immiscible phases during the CO2 capturing procedure under a certain temperature. The solvent systems can significantly decrease the energy consumption since the solvents can be regenerated by only heating the rich-CO2 phase. In this work, amino acid ionic liquids (AAILs) were synthesized using quaternary ammonium salts and amino acids as raw materials, and the aqueous solutions were prepared as novel liquid-solid phase change solvents. The results showed that the solvents had excellent CO2 absorption capacity, and the AAILs functionalized by glycine and tryptophan exhibited significant phase change properties. The mechanism of phase-change of the solvent were mainly due to the lower solubility of the product after reaction between AAILs and CO2. The solvent with tryptophan as anion could be regenerated by only heating the CO2-riched solid phase, which might significantly decrease energy consumption of regeneration. And the absorbent could be reused with the regenerated absorption ratio up to 79%. The solvent system has great potential in industrial application due to the easy operation process and efficient recycling ability.

Internet-led labour market has become so competitive forcing many organisations from different sectors to embrace e-recruitment. However, realising the value of the e-recruitment from a Requirements Engineering (RE) analysis perspective is challenging. This research is motivated by the results of a failed e-recruitment project conducted in military domain which is used as a case study in this research. After reviewing the various challenges faced in that project through a number of related research domains, this research focuses on two major problems which are the (1) difficulty of scoping, representing, and systematically transforming recruitment problem knowledge towards e-recruitment solution specification; and (2) the difficulty of documenting e-recruitment best practices for reuse purposes in an enterprise recruitment environment. In this paper, a Problem-Oriented Conceptual Model (POCM) with a complementary Ontology for Recruitment Problem Definition (Onto-RPD) is proposed to contextualise the various recruitment problem viewpoints from an enterprise perspective and to elaborate those problem viewpoints towards a comprehensive recruitment problem definition. The POCM and Onto-RPD are developed incrementally using action-research conducted on three real case studies: (1) Secureland Army Enlistment, (2) British Army Regular Enlistment, and (3) UK Undergraduate Universities and Colleges Admissions Service (UCAS). They are later evaluated in a focus group study against a set of criteria. The study showed that the POCM and Onto-RPD provide a strong foundation for representing and understanding the e-recruitment problems from different perspectives.

Apoptosis and cell cycle arrest induction are targeted in the strategy of cancer therapy. Furthermore, bacterial toxin such as shiga-like toxin producing Escherichia coli has been suggested to be used as novel therapeutic agent against tumor malignancies either as independent anti-neoplastic agents or in combination treatment with chemo or radiotherapy. The aim of study was to investigate the potency of shiga-like toxin originated from local strains of E. coli O157:H7 as a new cancer therapy. As many as 10 culture cells T47D cell line were subjected by crude extract Shiga like toxin originated from five local isolates of E. coli O157:H7 i.e. KL-48(2), SM-25(1), SM-7(1), DS-21(4), and one isolate ATCC 43894 as a control with IC50 doses, respectively. The treatment was observed for 24 h, with two replications. An FITC-Annexin V and PI assay was used to observe apoptosis and necrosis effect, and simultaneously with cell cycle analysis using propidium iodide (PI) staining. Results of study showed T47D cell treated with Shiga-like toxin from local strain KL-48 (2) show the lowest viable cell, followed by SM 7(1), ATCC 43894, SM-25(1), DS-21(4) and contrary with control with each percentages as 15.20, 16.36, 22.17, 22.64, 33.86, and 94.36%, respectively. The results were also confirmed by the induction of the cell cycle arrest in phase G0-G1 as inactive phase, i.e. 66.41, 63.37, 61.52, 55.36 and 47.28% for T47D cell treated with toxin of KL-48(2), ATCC 43894, SM 25(1), SM 7(1), and DS 21(4), respectively. These results show tendency deleterious effect of Shiga-like toxin from local isolates on T47D cell, so that concluded they have potency as a good anticancer drug in Gb3-expressing breast cancer.

Liquid biopsies are an integral part of the diagnosis of cancer. Here, we have extended previous validation studies of a new targeted NGS panel to include the detection of copy number amplifications (CNAs), fusions, and exon skipping variants. Detection of these gene classes included specimens from clinical and healthy donors and cell lines (fusions: ROS1, EML4-ALK, NTRK1), (exon skipping: MET exon 14), and (CNAs: HER2, CDK6, EGFR, MYC and MET). The limit of detection (LOD) for fusion/skipping was 42 copies (QC threshold = 3 copies) and was verified using 3 additional fusion/skipping variants. LOD for CNAs was 1.40-fold-change (QC threshold = 1.15-fold change) and was verified with 3 additional CNAs. In precision studies, all fusion/skipping variants were detected in all runs and all days of testing (n=18/18; 100%); average CV for repeatability was 20.5% (range 8.7% - 34.8%), and for reproducibility was 20.8% (range 15.7% - 30.5%). For CNAs, 28/29 (96.6%) copy gains were detected. For CNAs, average CV of 1.85% (range 0% to 5.49%) for repeatability and 6.59% (range 1.65% to 9.22%) for reproducibility. The test panel meets the criteria for being highly sensitive and specific and extends its utility for the detection of clinically relevant variants in cancer.

Hydrological models have been widely used for many purposes in water sector projects, including streamflow prediction and flood risk assessment. Among the input data used in such hydrological models, the spatial-temporal variability of rainfall datasets has a significant role on the final discharge estimation. Therefore, accurate measurements of rainfall are vital. On the other hand, ground-based measurement networks, mainly in developing countries, are either nonexistent or too sparse to capture rainfall accurately. In addition to in-situ rainfall datasets, satellite-derived rainfall products are nowadays available globally with high spatial and temporal resolution. An innovative approach called SM2RAIN that estimates rainfall from soil moisture data has been applied successfully to various regions. In this study, firstly soil moisture content derived from the Advanced Microwave Scanning Radiometer for the Earth observing system (AMSR-E) is used as input into the SM2RAIN algorithm to estimate daily rainfall, SM2R-AMSRE, at different sites in the Karkheh river basin (KRB), southwest Iran. Secondly, the SWAT (Soil and Water Assessment Tool) hydrological model is applied to simulate runoff using both ground-based observed rainfall and SM2R-AMSRE rainfall as input. The results reveal that the SM2R-AMSRE rainfall data are, in most cases, in good agreement with ground-based rainfall, with correlations R ranging between 0.58 and 0.88, though there is some underestimation of the observed rainfall, due to soil moisture saturation, not accounted for in the SM2RAIN equation. The subsequent SM2R-AMSRE- SWAT- simulated monthly runoff reproduces well the observations at the 6 gauging stations (with coefficient of determination, R² > 0.72), though with slightly worse performances in terms of bias (Bias) and root-mean-square error (RMSE) and, again, some systematic flow underestimation than the SWAT model with ground-based rainfall input. Furthermore, rainfall estimations of two satellite products of the Tropical Rainfall Measuring Mission (TRMM), 3B42 and 3B42RT, are used in the calibrated SWAT- model. The monthly runoff obtained with 3B42- rainfall have 0.39< R2 < 0.70 and are slightly better than those obtained with 3B42RT- rainfall, but not as good as the SM2R-AMSRE- SWAT- simulated runoff above. Therefore, in spite of the afore-mentioned limitations, using SM2R-AMSRE rainfall data in a hydrological model like SWAT, appears to be a viable approach in basins with limited ground-based rainfall data.

The popularity of electronic cigarettes in the United States and around the world has led to a startling rise in youth nicotine use. The Juul e-cigarette was introduced in the U.S. market in 2015 and had captured approximately 13% of the U.S. market by 2017. Unlike many other contemporary electronic cigarette companies, the founders behind the Juul® e-cigarette approached their product launch like a traditional high-tech start-up company, not like a tobacco company. This article presents a case study of Juul’s corporate and product development history in the context of US regulatory actions. The objective of this article is to demonstrate the value of government-curated archives as leading indicators which can (a) provide insight into emergent technologies and (b) inform emergent regulatory science research questions. A variety of sources were used to gather data about the Juul e-cigarette and the corporations that surround it. Sources included government agencies, published academic literature, non-profit organizations, corporate and retail websites, and the popular press. Data was disambiguated, authenticated, and categorized prior to being placed on a timeline of events. A timeline of four significant milestones, nineteen corporate filings and events, twelve US regulatory actions, sixty four patent applications, eighty seven trademark applications, twenty three design patents and thirty two utility patents related to Juul Labs and its associates is presented spanning the years 2004 thought 2020. This work demonstrates the probative value of findings from patent, trademark, and SEC filing literature in establishing a premise for emergent regulatory science research questions which may not yet be supported by traditional archival research literature. The methods presented here can be used to identify key aspects of emerging technologies before products actually enter the market, this shifting policy formulation and problem identification from a paradigm of being reactive in favor of becoming proactive. Such a proactive approach may permit anticipatory regulatory science research and ultimately shorten the elapsed time between market technology innovation and regulatory response.

Currently, there is increasing industrial demand for rare earth elements (REE) as these elements are now integral to the manufacture of many carbon-neutral technologies. The depleting REE ores and increasing mining costs are prompting to look for alternative sources for these valuable metals, particularly from waste streams. Although REE concentrations in most of the alternate resources are lower than current REE ores, some sources such as marine sediments, coal ash, and industrial wastes like red mud are looking promising with significant concentrations of REE in them. This review focuses on the alternative resources for REE such as ocean bottom sediments, continental shelf sediments, river sediments, stream sediments, lake sediments, phosphorites deposits, industrial waste products like red mud, and phosphogypsum, coal, coal fly ash, and related materials, waste rock sources from old and closed mines, acid mine drainage, and recycling of e-waste. Possible future Moon exploration and mining for REE and other valuable minerals are also discussed. It is evident that REE extractions from both primary and secondary ores alone are not adequate to meet the current demand, and sustainable REE recovery from the alternative resources described here is also necessary to meet the growing REE demand. An attempt is made to identify the potential of these alternative resources and sustainability challenges, benefits, and possible environmental hazards to meet the growing challenges in meeting the future REE requirements.

The present work describes the optimization and validation of a highly selective and sensitive analytical method using solid phase extraction and liquid chromatography tandem mass spectrometry (SPE LC-MS/MS) for the determination of some frequently prescribed pharmaceuticals in urban wastewater received and treated by Sharjah sewage treatment plant (STP). The extraction efficiency of different SPE cartridges was tested and the simultaneous extraction of pharmaceuticals was successfully accomplished using hydrophilic-lipophilic-balanced reversed phase Waters^® Oasis HLB cartridge (200 mg/ 6 mL) at pH 3. The analytes were separated on an Aquity BEH C₁₈ column (1.7 µm, 2.1 mm x 150 mm) using gradient elution and the mass spectrometric analysis were performed in multiple reactions monitoring (MRM) selecting two precursor ions to produce ion transition for each pharmaceutical using positive electrospray ionization (+ESI) mode. The correlation coefficient values in the linear calibration plot for each target compound exceeded 0.99 and the recovery percentages of the investigated pharmaceuticals were more than 84%. Limit of detection (LOD) varied between 0.1-1.5 ng/L and limit of quantification (LOQ) was 0.3-5 ng/L for all analytes. The precision of the method was calculated as the relative standard deviation (RSD%) of replicate measurements and was found to be in the ranges of 2.2% to 7.7% and 2.2% to 8.6% for inter and intra-day analysis, respectively. All of the obtained validation parameters satisfied the requirements and guidelines of analytical method validation.

In the recent century, the tourism industry and within it the tourism economy are one of the most important and fundamental sectors of engaged business. E-tourism can be used as a dynamic tool in up to date areas of informative information and tourism marketing will be considered as a suitable field for the tourism industry. The aim of this study was to investigate the relationship between climate change and the amount of revenues from the tourism industry relying on a tool called e-tourism, and informing and providing services through this way so that Iran can achieve a greater share of export of a single-product oil economy combined with economic growth and sustainable development goals. The method of this research is descriptive-analytical.

Synthetic fuels play an important role in the defossilization of future aviation transport. To reduce the ecological impact of remote airports due to long range transportation of kerosene, a decentralized on-site-production of synthetic paraffinic kerosene is applicable, preferably as near-drop-in fuel or alternatively as blend. One possible solution for such a production of synthetic kerosene is the Power-to-Liquid process. The basic development of a simplified plant layout addressing the specific challenges of a decentralized kerosene production which differ from most current approaches for infrastructural well-connected regions is described. The decisive influence of the Fischer-Tropsch synthesis on the PtL process is shown by means of a steady-state reactor model which was developed in Python and serves as basis for further development of a modular environment able to represent entire process chains. The reactor model is based on reaction kinetics according current literature. The effects of adjustments of the main operation parameters on the reactor behavior are evaluated and the impacts on up- and downstream processes are described. The results prove the governing influence of the Fischer-Tropsch reactor on the PtL process and show its flexibility regarding the desired product fraction output, which makes it an appropriate solution for a decentralized kerosene production.

Despite the uptake of tobacco smoking declining in the UK, smoking is still the leading cause of preventable poor health and premature death. While improved approaches to smoking cessation are necessary, encouraging and assisting smokers to switch by using substantially less toxic non-tobacco nicotine products may be a possible option. To date few studies have investigated the rates of smoking cessation and smoking reduction associated with the free provision of electronic-cigarettes (e-cigarette) to smokers. In this study the Blu Pro e-cigarette was given to smokers for use in place of tobacco for 90 days. The rates of smoking abstinence and daily smoking patterns were assessed at baseline 30 days, 60 days and 90 days. The response rate was 87%. After 90 days, the complete abstinence rate was 36.5% from 0% at baseline. Frequency of daily smoking reduced from 88.7% to 17.5% (P<0.001) and median consumption of cigarettes/day from 15 to 5 (P<0.001). Median days per month participants smoked also dropped from 30 to 13 after 90-days (P<0.001). On the basis of these results there may be value in smoking cessation services and other services ensuring that smokers are provided with e-cigarettes at zero or minimal costs for at least a short period of time.

Advances in reconfigurable liquid-based reconfigurable antennas are enabling new possibilities to fulfil the requirements of more advanced wireless communication systems. In this review, a comparative analysis of various state-of-the-art concepts and techniques for designing reconfigurable antennas using liquid is presented. First, the electrical properties of different liquids at room temperature commonly used in reconfigurable antennas are identified. This is followed by a discussion of various liquid actuation techniques in enabling high frequency reconfigurability. Next, liquid-based reconfigurable antennas in literature used to achieve the different types of reconfiguration will be critically reviewed. These include frequency-, polarization-, radiation pattern- and compound reconfigurability. The current concepts of liquid-based reconfigurable antennas can be classified broadly into three basic approaches: altering the physical (and electrical) dimensions of antennas using liquid, applying liquid-based sections as reactive loads; and implementation of liquids as dielectric resonators. Each concept and their design approaches will be examined, outlining their benefits, limitations, and possible future improvements.

The application of a commonly used computer algorithm based on the group-additivity method for the calculation of the liquid viscosity coefficient at 292.15K and the activity coefficient at infinite dilution in water at 298.15K of organic molecules is presented. The method is based on the complete breakdown of the molecules into their constituting atoms, further subdividing them by their immediate neighbourhood. A fast Gauss-Seidel fitting method using experimental data from literature is applied for the calculation of the atom groups’ contributions. Plausibility tests have been carried out on each of the calculations using a 10-fold cross-validation procedure which confirms the excellent predictive quality of the method. The goodness of fit (Q²) and the standard deviation (σ) of the cross-validation calculations for the viscosity coefficient, expressed as log(η), was 0.9728 and 0.11, respectively, for 413 test molecules, and for the activity coefficient log(γ)^∞ the corresponding values were 0.9736 and 0.31, respectively, for 621 test compounds. The present approach has proven its versatility in that it enabled at once the evaluation of the liquid viscosity of normal organic compounds as well as of ionic liquids.

Although there are extensive literature reports on the use of gold nanoparticle (AuNP) based homogeneous assays for detection of biomolecules, very few experimental description and procedures involving their preparation are described. In this study, AuNPs conjugated to Bovine Serum Albumin or Envelope protein from Dengue II were developed as a homogeneous immunoassay for antibody detection. We report here optimization of key parameters to prepare an immunoassay like conjugation protein concentration, centrifugation time, electrolyte addition and assay temperature. We determined that saturating protein concentrations improved AuNPs surface coverage and uniformity of the assay and addition of sodium chloride improved sensitivity of the antibody detection method and assay stability. Furthermore, we showed that dynamic light scattering can be used to monitor changes in gold nanoparticles in the preparation and detection steps. Additionally, numerical simulations of the plasmonic optical response of AuNPs were carried out to scan for size-dependent response of the AuNPs. The AuNPs homogeneous immunoassay developed was further used in the detection of antibodies in vitro to detect Dengue virus infection.

The Rybczynski theorem describes the trade effect within production analyses between factor endowments and outputs. The Stolper-Samuelson theorem focuses on cost analyses between factor reward and commodity price. This paper examines the trade effect of changes of factor endowments on prices, based on general equilibrium. The study shows that changes of factor endowments cause domestic output changes (the Rybczynski effect), which affect output prices and factor prices (the Stolper-Samuelson effect). It is like a chain of effects that the Rybczynski’s trade effect triggers the Stolper-Samuelson’s trade effect. The analysis of this paper shows that a small increase of a factor endowment of any country rewards another factor and the commodity using the latter factor intensively. It displays a tuneful circle. Trade brings a well-balanced development to the world.

Many various using of this new-born fuzzy model for solving real-world problems and urgent requirements involve introducing new concept for analyzing the situations which leads to solve them by proper, quick and ecient method based on statistical data. This gap between the model and its solution cause that we introduce nikfar domination in neutrosophic graphs as creative and eective tool for studying a few selective vertices of this model instead of all ones by using special edges. Being special selection of these edges aect to achieve quick and proper solution to these problems. Domination hasn't ever been introduced. So we don't have any comparison with another denitions. The most used graphs which have properties of being complete, empty, bipartite, tree and like stu and they also achieve the names for themselves, are studied as fuzzy models for getting nikfar dominating set or at least becoming so close to it. We also get the relations between this special edge which plays main role in doing dominating with other special types of edges of graph like bridges. Finally, the relation between this number with other special numbers and characteristic of graph like order are discussed.

This paper presents a multifunctional reflective digital metasurface of arbitrary base based on voltage tunable liquid crystal (LC). The reflective digital metamaterial can be multiplexed for different desirable functions by properly biasing the LC for different code patterns. Simulation results of three significant functions, beam steering with a steering elevation angle 27° at 75 GHz, RCS reduction of at least 15dB along the incident direction, and beam shaping with different beam shapes have been presented to prove the concept.