Activated carbons can be produced from biomass in a thermal process either in a direct carbonization-activation process or by first carbonizing the biomass and later on activating the biochars into activated carbons. The properties of the ACs are dependent on the type of process used for production. In this study, the properties of activated carbons produced in a one-stage and a two-stage process are considered. Activated carbons were produced by physical activation of two types of starting materials, bio chars produced from spruce and birch chips in a commercial carbonization plant and from the corresponding raw chips. The activated carbons produced were characterized regarding specific surfaces, pore volumes and pore size distributions. The un-activated bio chars had some degree of surface area 190 and 140 m²g^-1 for spruce and birch and pore volumes of 0.067 and 0.092 cm³g^-1. According to the results obtained, two slightly different types of activated carbons are produced depending if a one-stage or a two-stage carbonization and activation process is used. The ACs produced in the one-stage process had higher specific surface areas compared to the ones produced in a two-stage process (761-940 m²g^-1 vs. 540-650 m²g^-1) . In addition, total pore volumes were higher in one-stage process but development of micropores is greater compared to two-stage process. There was no significant difference in total carbon content between one-stage and two-stage process.

This paper presents an overview of the principal structural and dynamics characteristics of reverse micelles (RMs) in order to highlight their structural flexibility and versatility, along with the possibility to modulate their parameters in a controlled-manner. The multifunctionality in a large range of different scientific fields is exemplified in two distinct directions: a theoretical model for mimicry of biological microenvironment and practical application in the field of nanotechnology and nano-based sensors. RMs represents a convenient experimental approach that limits the drawbacks of the conventionally biological studies in vitro, while the particular structure confers them the status of simplified mimics of cells by reproducing a complex supramolecular organization in an artificial system. The biological relevance of RMs is discussed in some particular cases referring to the confinement and crowding environment, molecular dynamics of water and cell membrane structure. The use of RMs in different range of applications seems to be more promising due to their structural and compositional flexibility, a high efficiency and selectivity being achieved. The advance in nanotechnology is based on developing new methods of nanomaterials synthesis and deposition. This review highlighting the advantages of using RMs in synthesis of nanoparticles with specific properties and in nano (bio)sensors design.

(1) Background: This report examines the unique demands of off-road triathlon (XT) by presenting physiological, field, and race data from a national champion off-road triathlete using several years of laboratory and field data to detail training and race intensity. (2) Methods: Laboratory and field data were collected when the athlete was at near peak fitness and included oxygen consumption (VO2), heart rate (HR), power output (W), and blood lactate (BLC) during cycling and running, while HR, cycling W, and running metrics were obtained from training and race data files over a period of seven years. Intensity was described using % HR max zones (Z) 1 < 75%, 2 = 75 - 87%, and Zone 3 > 87%, and W. An ordinary least squares analysis was used to model differences between event types. (3) Results: Weather conditions were not different across events. XT events had twice the elevation change (p<0.01) and two-three times greater W’ (p< 0.001) than road triathlon (ROAD), but similar HR intensity profiles (max, avg, and zones); both events are predominately performed at > Z2 or higher intensity. Championship XT events were longer (p<0.01) , with higher kJ expenditure (p<0.001). OLS modelling suggested three variables were strongly related (R2 = 0.84; p < 0.0001) to cycling performance: event type (XT vs ROAD), total meters climbed, and total bike duration. Championship XT runs were slower than either regional (p<0.05) or ROAD (p<0.01) runs, but HR intensity profiles similar. OLS modelling indicates that slower running is linked to either greater total bike kJ expenditure (R2 = 0.57; p<0.001), or total meters gained (R2 = 0.52; p<0.001). Race simulation data support these findings but failed to produce meaningful differences in running. Conclusions: XT race demands are unique and mirror MTB and trail running demands. XT athletes must be mindful of developing anaerobic fitness, technical ability, and aerobic fitness, all of which contribute to off-road cycling economy. It is unclear whether XT cycling affects subsequent running performance different from ROAD cycling.

Anchovies are amid the largest fish catch worldwide. The anchovy fillet industry generates a huge amount of biowaste (e.g. fish heads, bones, tails) that can be used for the extraction of several potentially valuable bioproducts including omega-3 lipids. Following the extraction of valued fish oil rich in omega-3, vitamin D₃ and zeaxanthin from anchovy fillet leftovers using biobased limonene in a fully circular process, the solid residue was used as starting substrate for the production of biogas by anaerobic digestion. The results first reported in this study demonstrate good potential energy recovery of the anchovy sludge of about 280 mL_CH4∙g_VS^-1. Due to unbalanced C/N ratio typical of marine biowaste, co-digestion with a carbon rich substrate is recommended.

The Sharing Economy (SE) has dawn great attention from several stakeholders in society in the last five years. While business actors are interested in financial opportunities to meet consumer needs, new business models, the academia and governmental organizations are concerned with potential unintended effects on the society and environment. In the process of making a clearer comprehension of the SE phenomenon, researchers have identified that, despite its notable global growth, there still persists a lack of a more solid ground in understanding its origins and respective mechanisms under which it has been evolving over time as a category. In this research, we address the problematics of the origins and ascendency of the SE by examining the process by which the SE is arising as a new category, searching for conceptual clarification and pinpointing the legitimacy granted by key stakeholders. Our guiding research questions are: (1) how the SE was formed and evolved as a market category; and (2), as a market category, is the SE legitimate? Additionally, we attempt to identify the nature of the SE as a category. To answer these questions, we conducted an historical analysis of the expression SE and its equivalents. This paper deepens the discussion about the nature of the SE by providing evidence that (i) the SE has predominantly been formed by emergence processes, comprising social movement, similarity clustering and truce components. It is the combination of all these aforementioned processes that renders the SE a special case of market category formation, which, in turn, has been allowing communication, entrepreneurship, regulation and research about what really is the SE, and despite the evident lack of agreements regarding both the label and its content; (ii) there is a generalized legitimacy granted to the SE by a vast number of stakeholders, even though still lacking on the consolidation of socio-political legitimation, and (iii) the nature of the SE seems to fall in a metaphorical approach, particularly, the notion of radial categories.

Briquetting of biomass is an ideal technique for improvising both its volumetric and net energy density; besides, serving as an effective means for reducing pollution. In general, numerous biomass and organic by-products are discarded as wastes, citing their non-edibility, composition of chemical compounds present in their raw form, in addition to their zero usage value. Yet, these biomass wastes hold significant heating values, which promote them into promising solid biofuels, either in their existing or pre-treated form. Accordingly, this review article discusses about the various biomasses used as raw feedstock for briquetting, besides summarising the works carried out in relevance to their respective briquettes. In addition, proximate and lignocellulosic composition of these biomasses, and their pre-treatment techniques followed to prepare them for briquetting, have also been discussed. This study suggested that the heating value of biomasses ranged between 10-20 MJ/kg, whilst, their briquettes reported between 15 and 25 MJ/kg; thereby citing their potential as viable replacement for existing fossil coals. Besides, factors affecting different thermal and physicochemical properties of these briquettes have also been studied and concluded that these properties play a crucial role in deciding the overall quality of the briquettes. Ultimately, this study proposed that any biomass with good calorific value and lignin content can be processed into briquettes with good strength and durability; however, the choice of biomass will also be accounted for by its availability, geographical distribution, and handleability.

Ultrafast laser 3D lithography based on non-linear light-matter interactions, widely known as multi-photon lithography (MPL), offers unrivaled precision rapid prototyping and flexible additive manufacturing options. 3D printing equipment based on MPL are already commercially available, yet there is still no comprehensive understanding of factors determining spatial resolution, accuracy, fabrication throughput, repeatability, and standardized metrology methods for the accurate characterization of the produced 3D objects and their functionalities. The photoexcitation mechanisms, spatial-control or photo-modified volumes, and the variety of processable materials are topics actively investigated. The complexity of the research field is underlined by limited understanding and fragmented knowledge of light-excitation and material response. Research to date has only provided case-specific findings on photoexcitation, chemical modification, and material characterization of the experimental data. In this review, we aim to provide a consistent and comprehensive summary of the existing literature on photopolymerization mechanisms under highly confined spatial and temporal conditions, where, besides the excitation and cross-linking, parameters such as diffusion, temperature accumulation, and the finite amount of monomer molecules start to become of critical importance. Key parameters such as, photoexcitation, polymerization kinetics, and the properties of the additively manufactured materials at the nanoscale in 3D are examined, whereas, the perspectives for future research and as well as emerging applications are outlined.

Bio-economy is a major area of the strategy that must enable the European Union to achieve growth: smart, through the development of knowledge and innovation; and sustainable, based on a greener, more efficient economy in resource management. We believe that the progress of bio-economy cannot be achieved without the harnessing of intellectual capital. Our research aimed to emphasize the benefits of the dynamics of the intellectual capital growth on the evolution of the bio-economy. The aim of this analysis was to study the established link between the Energy Intensity of the Economy (EIE) and a number of factors that can measure the intellectual capital, such as: Market Capitalization of Bitcoin, Patent applications listed by European Patent Office and the Turnover from Innovation as a proportion of the total Turnover. The ultimate goal was represented by the generation of a regression model to see what factor influences mostly the progress of the bio-economy at European and Romanian level.

Conflict between agricultural water resources and socio-economy development is a global problem. Accurate evaluation of coordinated development of agricultural water resources and socio-economy and risk mitigation is necessary for sustainable development. An evaluation method, including selection of criteria, data collection, determination of weight, evaluation of coordinated development, prediction of parameters, and judgment of coordinated development state, has been proposed to study coordinated development degree. To deal with uncertainties, Monte Carlo method and fuzzy set method were used. The method is demonstrated to solve a real-world evaluation problem in Shanxi Province in the middle of China. Results show that coordinated development degrees were (0.7, 0.8) for most of the cities of Shanxi in 2015, indicating that coordinate development state was intermediate coordinate. To achieve balanced development, more attention should be put on socio-economic development in Taiyuan and Yanquan, and agricultural water resources utilization in Jinzhong, Yuncheng and Xinzhou. The average coordinated development degree is 0.758, and coordinate development state was intermediate coordinate from 2006 to 2015. Coordinated development degree has a trend of decreasing markedly, coordinate development state will be barely coordinated, and agricultural water resources utilization lags behind socio-economic development in 2020. The study demonstrates the practicability of the improved method, by evaluating coordinated development degree under uncertainty and forecasting future risks, which will conduce to promote sustainable development of agricultural water resources and socio-economy.

Lead, known as a metal with high neurotoxicity to children, cadmium, which is a carcinogenic and bioaccumulative contaminant, and arsenic, a class 1 carcinogenic according to the International Agency for Research on Cancer, are toxic elements (TEs) whose relevant route of exposure may be diet. We determined the bio-accessible fraction of lead, cadmium, and arsenic from the diet of preschool children from two day care centers (DCC). A cross-sectional study was conducted with 64 one–four-year-old children from two DCCs where the 24-h duplicate diet samples were collected. The diet samples were analyzed by ICP-MS for lead, cadmium, and arsenic total concentrations (n = 64) and their bio-accessibility were analyzed for a subsample (n = 10). The dietary intake (DI) mean for lead, cadmium, and arsenic were 0.18 ± 0.11 µg kg⁻¹ bw, 0.08 ± 0.04 µg kg⁻¹ bw, and 0.61 ± 0.41 µg kg⁻¹ bw, respectively. All DI calculated for TEs, considering total intake, were found lower than the tolerable limits (TL) (European Union, or World Health Organization, WHO, when applicable) except for one child’s Pb intake. Bio-accessibilities ranged between 0% to 93%, 0% to 103%, and 0% to 69%, for lead, cadmium, and arsenic, respectively. Although DI for TEs has been found lower than TL, these reference values have been recently decreased or withdrawn since it was for lead and arsenic whose TL were withdrawn by WHO.

Circular Economy involves structural changes in traditional business models and consumers’ behaviour toward recycled products. The recycling of PET products has been increasing but there is still a gap between consumption and demand for PET packaging in Brazil. In this research, the waste reduction was examined under a projective scenario to the current ecological purposes in Brazil for reducing environmental pollution. In that manner, this paper aimed to comprehend the intention to purchase recycled PET products of Brazilian consumers. With a non-probabilistic and convenience sample, the study counts 422 participants. The method employed was based on Structural Equation Modelling and Partial Least Squares, used to test the hypotheses of causality among the variables. Results showed the perception of low quality about recycled products reduced consumers’ intention to purchase. Also, the sustainability of recycled products positively influenced the intention to purchase. In addition, recycled products presented a negative impact on the perceived safety, which could influence the purchase of recycled products in Brazil. We conclude that the image that Brazilian consumers have about recycled products positively affects the intention to purchase.

This is a paper on Political Economic and Economic Policies into the European Green Deal framework and the Spanish recovery plan, with special attention to the tourism sector. First, there is a literature review, combining the scientific production with professional and institutional literature, to understand the topic development, from the former restrictive point to the current view at large. Second, it is offered a case study about the green jobs opportunity, according to wellbeing economics, for the Spanish tourism sector renewal. The paper provides valuable information to improve sectorial recovery plan, to coordinate the policymakers and the business managers and entrepreneurs.

Biofuels have many environmental and practical benefits as a transportation fuel. They are among the best alternatives to fossil fuels due to their capacity for negative carbon emissions, which is vital for archiving the global ambition of a Net-Zero Economy. However, conventional biofuel production takes place on inland sites and relies on freshwater and edible crops (or land suitable for edible crop production), which has led to the food vs fuel debate. It also suffers technical and economical barriers due to the energy balance and the cost of production compared to fossil fuels. Establishing a coastal integrated marine biorefinery (CIMB) system for the simultaneous production of biofuels, high-value chemicals, and other co-products could be the ultimate solution. The proposed system is based on coastal sites and relies on marine resources including seawater, marine biomass (seaweed) and marine microorganisms (marine yeasts and marine microalgae). The system will not require the use of arable land and freshwater in any part of the production chain and will be linked to offshore renewable energy sources to increase its economic and environmental value. This article aims to introduce the CIMB system as a potential vehicle for addressing global warming and speeding the global effort on climate change mitigation as well as increasing global water, food and energy security. I hope this perspective may serve to draw attention into research funding for this approach.

Due to the prospective local and international markets, the neon tetra fish breeding industry has its own allure for fish lovers and as a side business. The goal of the study was to analyze the opportunities and difficulties associated with neon tetra fish farming in order to build a "Blue Economy" policy. The Depok City Food Security and Fisheries Service (DKP3) program was implemented with the help of key informants who were chosen based on the following criteria: 1) DKP3 Officials, such as the Board of Trustees of the Fish Farming Group (POKDAKAN), 2) Researchers from the BRBIH (Ornamental Fish Farming Research Center), 3) Practitioners/Extension Workers, and 4) POKDAKAN.The study's conclusions state that the relevant Dinas must support local policies based on natural identification that are strengthened at the national level, that routine human resource training needs to be improved, that technology needs to be taken into account in collaboration with the private sector, and that post-harvest and market access are essential for industry. The SWOT analysis's findings, which are in quadrant 1, show that the firm is in a position for rather aggressive expansion.

This study evaluates the production of biohydrogen from agro industrial waste. The worldwide energy demand is increasing exponentially and the reserves of fossil fuels are depleting, the combustion of fossil fuels has the effect on environment because of CO2 emission. Hydrogen generation market size is forecast to cross 180 billion by 2024, according to a new research report by global market. For the production of biohydrogen. we had chosen groundnut shell as our source, using Tween80 as a surfactant we had undergone pre-treatment studies for (10min,20min,30min,40min,50min) we had estimated the content of cellulose, protein, carbohydrates at (1%,2%,3%,4%,5%) and obtained the optimum value in the form of graph. The production of hydrogen is done by using the rumen fluid of the cow and the quantity of the hydrogen produced by this process is identified by using the analytical instrument Gas Chromatography.

Water and sanitation facilities in sub-Saharan Africa and Africa in general are appalling and for the most part absent. Progress continues with respect to the development of plant materials as potent adsorbents, disinfectants, coagulants, flocculants, wetland species and lots more as substitutes for the dangerous chemical disinfectants. This research presents the potential of phyto-active components of Zanthoxylum zanthoxyloides and Gongronema latifolium as effective biocides against water microbial contaminants. Dry powder of Zanthoxylum zanthoxyloides and Gongronema latifolium were extracted and prepared into different concentrations with ethyl acetate and chloroform, ranging from 25 to 500 mg/ml. These fractions were then examined for antimicrobial activities against inherent bacterial and fungal water contaminants using disc diffusion assay. Fractions were afterwards screened for phytochemical active compounds using standard methods. Crude extracts of the different plant examined selectively comprise saponins, tannins, reducing sugars, anthraquinones, flavonoids, terpenoids, phlobatanins and alkaloids. All plant extracts showed broad spectrum antibiosis against selected gram positive and gram negative bacteria including E. coli, P. aeruginosa, Klebsiella sp, S. pneumoniae and B. cereus, as well as tested fungi, including A. niger, A. flavus, Trichoderma sp and Candida sp. While all extracts exhibited maximum antibiosis at 500 mg/ml, the chloroform extracts compared well than ethyl acetate extracts. The overall results revealed that antimicrobial activities of the plant extracts are dose dependent with comparative activity greater than that of commercial antibiotics at the concentration of extracts tested. E.coli was the most susceptible microbial isolate tested and represents the potential of the extract against a group of coliform which are important indicators of microbial pollution in water. Other microbial isolates also recorded sensitivity to extracts tested at varying degrees. The findings indicate that microbes tested were mostly susceptible to chloroform extract of Z. zanthoxyloides and G. latifolium except for the activity of ethyl acetate extract of Z. zanthoxyloide against E.coli. Results of phytochemical screening of the extract also showed the varied presence of alkaloids, saponins, tannins, flavonoids, terpenoids and anthraquinones The results indicated that plant materials investigated can be developed as effective biocides against water microbial contaminants

Adenine nucleotide (AN) 2^nd messengers such as 3’,5’-cyclic adenosine monophosphate (cAMP) are central elements of intracellular signaling, but many details of underlying processes remain still elusive. Like all nucleotides, cyclic nucleotide monophosphates (cNMPs) are net-negatively charged at physiologic pH which limits their applicability in cell-based settings. Thus, many cellular assays rely on sophisticated techniques like microinjection or electroporation. This setup is not feasible for medium- to high-throughput formats, and the mechanic stress that cells are exposed to raises the probability of interfering artefacts or false-positives. Here, we present a short and flexible chemical route yielding membrane-permeable, bio-reversibly masked cNMPs for which we employed the octanoyloxybenzyl (OB) group. We further show hydrolysis studies on chemical stability and enzymatic activation, and present results of real-time assays, where we used cAMP and Ca²⁺ live cell imaging to demonstrate high permeability and prompt intracellular conversion of some selected masked cNMPs. Consequently, our novel OB-masked cNMPs constitute valuable precursor-tools for non-invasive studies on intracellular signaling.

Intersectoral and intermunicipal cooperation are still underdeveloped spheres of public and economic development policies. Academic discussions are invariably focused on pro-competitive activities, the economic efficiency of which is not always sufficient. In this paper the authors attempt to identify factors leading to cooperation between local government authorities and economic entities, focusing on examples from the forest and wood-based sector in Poland. These processes are analysed in the framework of the New Institutional Economy, both in the theoretical and practical context.

Efficient use of agricultural wastes and by-products, basically transforming waste materials into value added products, is considered as pivotal for an effective bioeconomy strategy for the rural development. To this scope, citrus waste management represents a major issue for citrus processors but, at the same time, it embodies a potentially unexploited resource for the rural sustainable development. This study focuses on analyzing the current management of citrus waste in South Italy and identifying the determinants and barriers that may affect an entrepreneur’s choice on the destination of citrus waste. Citrus processors’ preferences about the contract characteristics needed to take part in a co-investment scheme have been investigated. Both analyses are preliminary steps to design an innovative and sustainable citrus by-product supply chain. Results show that the distance between the citrus processors and the citrus by-products plant is one of the main criteria for choosing alternative valorization pathways. Moreover, the required guaranteed capital, the short duration of the contract, and low risk are contract scheme characteristics that improve entrepreneurs’ willingness to co-invest in the development of a citrus waste multifunctional plant.

According to the current European and Italian scenario related to urban re-generation, cultural and landscape heritage, valorisation is being also enhanced by the activation of innovative processes. These involve the development of methodologies and tools that are able to address decision-making processes among low entropy economy, complex values and creative practices. In this perspective, the research aims to investigate the possibilities of developing a Cultural Heritage Low Entropy Enhancement (CHLEE) approach by considering how the complex values of cultural heritage can vary not only through a physical transformation of spaces but also through a program of uses and activities able to produce new values, where the human experience is essential. This type of model modifies the objectives that characterise the valorisation of cultural heritage and landscape, recognising that the fruition is no longer “consumerist” but “experiential”. A crucial role is represented by the heterogeneity of creative practices that contribute to the identificationidentifying and implementation ofimplementing innovative management and governance models. The present paper explores the components of creative regenerative processes, based upon the ex-post evaluation of some Italian experiments, across the PROMETHEE-GAIA multi-criteria method, to understand how creative experiences are building innovation ecosystem thanks to low entropy economy and improve the ex-ante evaluation for new strategies and policies.

This study explores the potential to reach a circular economy for post-consumer recycled polyethylene terephthalate (rPET) packaging and bottles by using it as a distributed recycling for additive manufacturing (DRAM) feedstock. Specifically, rPET is processed using only an open source toolchain with fused particle fabrication (FPF) or fused granular fabrication (FGF) processing. In this study, first the impact of granulation, sifting and heating (and their combination) is quantified on the shape and size distribution of the rPET flakes. Then feeding studies were performed to see if they could be printed through an external feeder or needed to be direct printed with a hopper using two Gigabot X machines, one with extended part cooling and one without. Print settings were optimized based on thermal characterization and for the latter which was shown to print rPET directly from shredded water bottles mechanical testing is performed. The results showed that geometry was important for extended feeding tubes and direct printed using a hopper. Further there is a wide disparity in the physical properties of rPET from water bottles depending on source and the history of the material. Future work is needed to enable water bottles to be used as a widespread DRAM feedstock.

Cryphonectria is a fungal genus associated with economically significant disease of trees. Herein we characterized a novel double-stranded RNA virus from the fungal species Cryphonectria naterciae, a species unexplored as a virus host. De novo assembly of RNA-seq data and Sanger sequencing of RACE (rapid amplification of cDNA ends) clones gave the complete, non-segmented genome (10,164 bp) of the virus termed Cryphonectria naterciae fusagravirus (CnFGV1) that was phylogenetically placed within the previously proposed viral family Fusagraviridae. Of 31 field-collected strains of C. naterciae, 40% tested CnFGV1-positive. Co-cultivation resulted in within-species transmission of CnFGV1 to virus-free strains of C. naterciae. Comparison of the mycelium phenotype and the growth rate of CnFGV1-infected and virus-free isogenic strains revealed frequent sectoring and growth reduction in C. naterciae. Co-culturing also led to cross-species transmission of CnFGV1 to Cryphonectria carpinicola and Cryphonectria radicalis, but not to Cryphonectria parasitica. The virus-infected C. naterciae and the experimentally infected Cryphonectria spp. readily transmitted CnFGV1 through asexual spores to the next generation. CnFGV1 strongly reduced conidiation and in some cases vegetative growth of C. carpinicola, which is involved in the European hornbeam disease. This study is the first report of a fusagravirus in the family Cryphonectriaceae and lays the groundwork for assessing a hypovirulence effect of CnFGV1 against the hornbeam decline in Europe.

Background A body composition monitor (BCM) has a role not only in determining over-hydration (OH) but also as an aid to nutritional assessment. For dialysis patient-specific clinical applications of BCM, it is necessary to clarify the relationship between body composition parameters and OH in healthy Chinese individuals. Methods This cross-sectional study involved 314 healthy individuals with a mean age of 45.7±13.1 years. BCM measurements were performed while the subjects were fasting. Results The mean OH level was 0.379±0.81 L. Lean tissue index (LTI) and Lean tissue mass (LTM) were significantly higher in males (p<0.001), while fat tissue index (FTI) was significantly higher in females (p<0.001). In univariate correlation analysis, FTI, Fat, and ATM had a negative correlation with OH in females and all subjects (p<0.05), while LTM and BCM had a positive correlation in all subjects (p<0.05). There was a significant negative correlation between phase angle (PhA) and OH in males, females, and all subjects (r=-0.634, p<0.001; r=-0.666, p<0.001; r=-0.484, p<0.001, respectively). In multivariate linear regression analysis, PhA (b=-1.266, p<0.001), LTM (b=0.987, p<0.001), age (b=-0.307, p<0.001) were independent predictors of OH. Conclusions This study demonstrated that age, LTM and especially PhA, had important roles in predicting OH in healthy Chinese individuals. In the future, PhA may aid in clinical assessment by helping to titrate dry weight among hemodialysis patients with malnutrition.

“Money has always been something of an embarrassment to economic theory. Everyone agrees that it is important; indeed, much of macroeconomic policy discussion makes no sense without reference to money. Yet, for the most part theory fails to provide a good account for it.” (Banerjee and Maskin, 1996, p. 955)The debate about whether or not a growth imperative exists in debt based, interest bearing mone- tary systems has not yet been settled. It is the goal of this paper to introduce a new perspective in this discussion.For that purpose an SFC computational model is constructed which simulates a post Keynesian Endogenous Money system without including economic parameters such as production, wages, consumption and savings. A case is made that isolating the monetary system allows for better analysis of the inherent properties of such a system.Loan demands, which are assumed to happen, are the driving force of the model. Simulations can be run in two modes, each based on a different assumption. Either the growth rate of the money stock is assumed to be constant or the loan rate, expressed as a percentage of the money stock, is assumed to be constant.Simulations with varying parameters are run in order to determine the conditions under which the model converges to stability, which is defined as converging to a bounded debt rate.The analysis shows that stability of the model is dependent on net bank profit ratios, expressed relative to their debt assets, remaining below the growth rate of the money stock. Based on these findings it is argued that the question about the existence of a growth imperative in debt based, interest bearing monetary systems needs to be reframed. The question becomes whether a steady state economy can realistically support such a system without destabilising it. In order to answer this question real world behavior of economic actors must be included in the model.It is concluded that there are indications that it might not be feasible for a steady state economy to support a stable debt based, interest bearing monetary system without strong interventions. However, more research is necessary for a definite answer. Real world observable data should be analysed through the lens of the presented model to bring more clarity.

Delipidation is a method of defatting that is generally associated with the removal of residual lipids or lipid groups from matrices in which they are present in minute quantities. The bio-delipidation of protein-rich poultry slaughterhouse wastewater (PSW) pre-treated with a dissolved air flotation (DAF) system was developed using microbial lipases from bacterial strains isolated from the PSW. The efficacy of the bio-delipidation system was quantitatively characterised by comparing the quality parameters i.e., fats, oil and grease (FOGs), turbidity, total suspended solutes (TSS), total chemical oxygen demand (tCOD) and protein concentration of the DAF pre-treated PSW and bio-lipidized samples. As hypothesised, the bio-delipidation system was able to effectively reduce the levels of these quality parameters when crude lipases of Bacillus cereus AB1 (BF3) and Bacillus cereus CC-1 (B30) strains were used. Strain-dependent quality characteristics were also observed in bio-delipidized samples. The study successfully managed to complement physical reduction techniques (DAF) with biological strategies (bio-delipidation) for improved PSW quality, with potential industrial applications.

Egyptian mongoose (Herpestes ichneumon) is a medium-size carnivore that in Europe is restricted to Iberia. The bio-ecology of this species remains to be elucidated in several dimensions, including gut microbiota that is nowadays recognized as a fundamental component of mammals. In this work, we investigated the gut microbiota of this herpestid by single-molecule real-time sequencing of twenty paired male (n=10) and female (n=10) intestinal samples. This culture-independent approach enabled microbial profiling based on 16S rDNA and investigation of taxonomical and functional features. The core gut microbiome of the adult subpopulation was dominated by Firmicutes, Fusobacteria, Actinobacteria, and Proteobacteria. Eight genera were uniquely found in adults and five in non-adults. When comparing gut bacterial communities across sex, four genera were exclusive of females and six uniquely found in males. Despite these compositional distinctions, alpha- and beta-diversity analyses showed no statistically significant differences across sex or between adult and non-adult specimens. However, males presented a significantly higher abundance of amino acid and citrate cycle metabolic pathways, compared to the significant overrepresentation in females of galactose’ metabolic pathways. Adults showed a significantly higher abundance of cationic antimicrobial peptide resistance pathways, while non-adults bared a significant overrepresentation of two-component systems associated with antibiotic synthesis, flagellin production and chemotaxis control. This study adds new insights into mongoose bio-ecology palette, highlighting taxonomical and functional microbiome dissimilarities across sex and age classes, possibly related to primary production resources and life-history traits that impact on behavior, diet and gut ecosystem.

Machine learning (ML) is penetrating in all walks of life and is one of the major driving forces behind the fourth industrial revolution, typically known as Industry 4.0. The purpose of the present study is to review the state-of-the-art ML applications in the biofuels' life cycle stages, i.e., soil, feedstock, production, consumption, and emissions. A keyword search is performed to retrieve relevant articles from the databases of the Web of Science and Google Scholar. ML applications in the soil stage were mostly based on the use of satellite images of land for estimation of biofuels yield or suitability analysis of agricultural land. In the second stage of the life cycle, assessment of rheological properties of the feedstocks and their effect on the quality of biofuels were dominant studies reported in the literature. The production stage included estimation and optimization of quality, quantity, and process conditions. The fuel consumption and emissions stage included analysis of engine performance and estimation of emissions temperature and composition, such as NOx CO, and CO2. This study identified the following trends: dominant ML method, the stage of life cycle getting more usage of ML, the type of data used for the development of the ML-based models, and the stage-wise frequently used input and output variables. The findings of this article are beneficial for academia and industry-related people involved in model development in different stages of biofuel’s life cycle.

This study provides a contribution to the research field of 3D printed earthen buildings, focusing, for the first time, on the load-bearing capacity of these structures. The study involves the entire production and testing process of the earthen elements, from design, to the preparation of the mixture and the 3D printing, up to the uniaxial compression test on a wall segment. The results indicate that 3D printed earthen elements have a compressive strength of 2.32 MPa, comparable to that of rammed earth structures. The experimental data also made it possible to draw conclusions on the action of the infill, which seems to have the function of stopping the propagation of cracks. This has a positive effect on the overall behavior of 3D printed earthen elements, since it avoids the onset of dilative behavior in the final stages of the load test and maintains ultimate load values higher than 50% of the maximum load.

Though innovations for sustainable management of natural resources have emerged over time, the rising demand for nature based health solutions and integration of endemic flora into global value chains could have adverse impacts on ecosystems. The ecological risks in the exploitation of wild medicinal plant resources are exacerbated by a myriad of agrotechnological risks and challenges that highly constrain their domestication. Successful exploitation and commercialization of medicinal plants thus require a clear understanding of their demand and production systems or value chain analysis. Accordingly there is need for innovative approaches towards their integration into global value chains. Since quality and safety, traceability, certification, as well as, consumer tastes and preferences are critical drivers in purchasing decisions by global consumers, they are inadvertently exploited to weaken Indigenous knowledge (IK), undermine common property rights and entrench value chains that favour a few elite buyers. This tend to create pervasive incentives for overexploitation of medicinal plant resources and environmental degradation. Potential solution lies in the recognition of drivers of vulnerability to environmental degradation and the innovative use of policy bricolage, feedback loops and interactions between knowledge, power and agency on one hand, and collective action and property rights institutions on the other hand. We conceptualise a framework that can mediate a transformational agenda and enhance systematic understanding of sustainability lenses in endemic medicinal plant resources value chains. This could in turn strengthen IK, enhance collective action and promote participation of local actors with positive impact on the utilisation and integration of endemic medicinal plant resources into global value chains.

During the past two decades of e-commerce growth, the concept of a business model has become increasingly popular. More recently, the research on this realm has grown rapidly, with diverse research activity covering a wide range of application areas. Considering the sustainable development goals, the innovative business models have brought a competitive advantage to improve the sustainability performance of organizations. The concept of the sustainable business model describes the rationale of how an organization creates, delivers, and captures value, in economic, social, cultural, or other contexts, in a sustainable way. The process of sustainable business model construction forms an innovative part of a business strategy. Different industries and businesses have utilized sustainable business models’ concept to satisfy their economic, environmental, and social goals simultaneously. However, the success, popularity, and progress of sustainable business models in different application domains are not clear. To explore this issue, this research provides a comprehensive review of sustainable business models literature in various application areas. Notable sustainable business models are identified and further classified in fourteen unique categories, and in every category, the progress -either failure or success- has been reviewed, and the research gaps are discussed. Taxonomy of the applications includes innovation, management and marketing, entrepreneurship, energy, fashion, healthcare, agri-food, supply chain management, circular economy, developing countries, engineering, construction and real estate, mobility and transportation, and hospitality. The key contribution of this study is that it provides an insight into the state of the art of sustainable business models in various application areas and future research directions. This paper concludes that popularity and the success rate of sustainable business models in all application domains have been increased along with the increasing use of advanced technologies.

CO2 emissions resulting from the production of cement is a major issue, but can be limited by the partial substitution of cement by low-carbon-impact additions. The aim of this study was the formulation of a ternary binder based on ordinary Portland cement (OPC), ground granulated blast-furnace slag (GGBS) and flash-calcined sediment (FCS), a dredged waste which was valorized after applying a new heat treatment: flash calcination. The used materials were physically, chemically and mineralogically characterized. The composition of the formulations was optimized using mixture designs. Five formulations, one reference formulation RM (100% OPC), one binary formulation (50% OPC/50% GGBS), and three ternary formulations with a variable FCS rate (10%, 15%, 20%), were selected and characterized fresh and hardened. Results showed that the incorporation of FCS reduced the workability and increased the density. In addition, a decrease in the initial setting time and the heat of hydration peak were observed. In the hardened state, the formulation containing 10% FCS showed 90-day mechanical strengths superior to that of RM. The use of FCS in ternary binders could reduce the environmental impact by reducing greenhouse gas emissions.

Bacteria a Microscopic organisms are the most inexhaustible and flexible of microorganisms and constitute a huge division of the whole living earthly biomass, certain microorganisms were found to amass metallic components at a high limit Was Known as Bacterial Bio-sorption Due to their little size, capacity to become under controlled conditions, and their Accommodation to an extensive variety of ecological situations; Potent metal bio-sorbents among microorganisms, at low pH esteems, cell divider ligands are protonated and contend essentially with metals for official. With expanding pH, more ligands, such as amino and carboxyl groups, could be exposed, leading to attraction between these negative charges and the metals, and consequently increment bio-sorption onto the cell surface. Starting with Isolation and identification of heavy metal-resistant bacteria from rock Ore. Studying Factors Affecting Uranium Bio-sorption, Optimization of bacterial growth conditions and optimum for metal uptake by free and immobilized bacterial cells and Desorption ratio of uranium ions adsorbed by Coli. /alginate, All this evidence suggest that functions groups Represented in our study are responsible for metal uptake in our bacterial biomass beside change in peaks position which assigned for it's groups confirm bio-sorption of metal ions from waste due to ions charge interaction comparing with immobilized we found increase in no of binding sites indicate that immobilized bacterial have high efficiency for metal up take which also change in peaks position which assigned for its groups confirm bio-sorption of metal ions from waste due to ions charge interaction, Where the high bio-sorption yield obtained by bacteria, the Uranium & heavy metal bioremediation process expects microorganisms to be joined to a strong surface.

This paper reports on the changing dynamics of a small town’s social-ecological system (SES) concerning oil and gas industry boom-bust economic cycles and both the vulnerability and resilience of the town over the past 30 years. With the goal to understand how resource-based single industry impact social-ecological systems, we developed indicators of human and environmental well-being and assessed them. Seven indicators include labor force distribution, education, oil price, household income, water quality, air quality, and land cover land use. Over this period, Drayton Valley, Canada quadrupled in size, with more than 20% of the population working in the oil and gas sector. Median income rose to 42% above the national average despite the population lagging national benchmarks for educational attainment. There have also been dramatic fluctuations in levels of fluoride, phosphorus, and other chemicals in water quality samples, implying a correlation with fossil fuel extractive activities over this period. Land cover land use change analysis shows a decreased area of water bodies, wetland, and forests, and increased built capital and agricultural land. While economic boom cycles have led to cash inflows, an exclusive focus on the benefits of the oil and gas industry may leave those dependent on the industry vulnerable to social and environmental risk factors during bust cycles that are beyond their control in the everchanging global oil economy. This phenomenon which has been referred to as the “resource curse” suggests the need to anticipate cyclical (or more sustained) periods of low levels of oil and gas production. These results suggest that single boom-bust economies impact every aspect of social-ecological systems. Therefore, a sustainable development plan that comprehensively considers not only economic growth, but also diversification, environment protection, and strategic land use planning is indispensable to ensure the long-term development of communities that depend upon extractive industries.

We present the design and overall development of an eight degrees of freedom (DOF) based Bioinspired Quadruped Robot (BiQR). The robot is designed with a skeleton made of cedar wood. The wooden skeleton is based on exploring the potential of cedar wood to be a choice for legged robots’ design. With a total weight of 1.19 kg, the robot uses eight servo motors that run the position control. Relying on the inverse kinematics, the control design enables the robot to perform the walk gait-based locomotion in a controlled environment. The robot has two main aspects: 1) the initial wooden skeleton development of the robot showing it to be an acceptable choice for robot design, 2) the robot’s applicability as a low-cost legged platform to test the locomotion in a laboratory or a classroom setting.

The utilisation of the industrial residual products to develop new value-added materials and to reduce footprint is one of the critical challenges of science and industry. Development of the new multifunctional and bio-based composites materials is an excellent opportunity for the effective utilisation of industrial residual products. Keeping the different issues in mind, in this work, we describe the manufacturing and characterisation of the three-phases bio-based composites. The key components are bio-based binder made of peat, devulcanised crumb rubber (DCR) from used tires and part of the fly ash, i.e. the cenosphere (CS). The three-phase composite prepared in the form of a block were investigated for their mechanical properties and density. The three-phase composite was prepared in the form a) of a block were investigated for their mechanical properties, and density and b) a form of granules for determination of the water and oil products sorption were investigated. We have also investigated the dependence of the properties on the DCR and CS fraction. It has been found, that maximum compression strength (in block form) observed for composition without CS and DCR addition was- 79.3 MPa, while the second-highest value of compression strength is 11.2 MPa for composition with 27.3 wt% of CS. For compositions with bio binder content from 17.4 to 55.8 wt% and with DCR contents in range from 11.0 to 62.0 wt%, the compression strength is in the range from 1.1 to 2.0 MPa. Liquid sorption analysis (water and diesel) showed that the maximum saturation of liquids in both cases is set after 35 minutes and ranges from 1.05 to 1.4 g·g -1 for water and 0.77 to 1.25 g·g-1 for diesel. It was noted that 90% of the maximum saturation with diesel fuel comes after 10 minutes and for water after 35 minutes.

Although distributed additive manufacturing can provide high returns on investment the current markup on commercial filament over base polymers limits deployment. These cost barriers can be surmounted by eliminating the entire process of fusing filament by 3-D printing products directly from polymer granules. Fused granular fabrication (FGF) (or fused particle fabrication (FPF)) is being held back in part by the accessibility of low-cost pelletizers and choppers. An open-source 3-D printable invention disclosed here provides for precise controlled pelletizing of both single thermopolymers as well as composites for 3-D printing. The system is designed, built and tested for its ability to provide high tolerance thermopolymer pellets from a number of sizes capable of being used in a FGF printer. In addition, the chopping pelletizer is tested for its ability to chop multi-materials simultaneously for color mixing and composite fabrication as well as precise fractional measuring back to filament. The US$185 open-source 3-D printable pelletizer chopper system was successfully fabricated and has a 0.5 kg/hr throughput with one motor, and 1.0 kg/hr throughput with two motors using only 0.24 kWh/kg during the chopping process. Pellets were successfully printed directly via FGF and indirectly after being converted into high-tolerance filament in a recyclebot.

The Doughnut Economy is a new approach for the inclusion of planetary boundaries and social foundation in the development of societies. The Sustainable Development Goals of the UN determine another view for development targets. The developed Sustainability Window approach provides a means for operationalisation and quantification of the Doughnut Economy. The developed method calculates minimum economic development to guarantee sustainable social development and maximum economic development not to exceed environmental sustainability. The developed method, ASA Doughnut, is illustrated with case data from Thailand. The sustainability Doughnut for Thailand has been calculated for both weak and strong sustainability criteria. It seems that strong sustainability is a too strict requirement regarding several environmental dimensions of development while the weak sustainability criteria are fulfilled. The developed method and tool is flexible and can be used for comparative analysis of different countries or regions, for dynamic analysis of sustainability development, for gap analysis of the required improvement of environmental or social efficiency, and analysis of degrowth possibilities. The selection of indicators for the analyses and their reliability is crucial for the validity of the results and usefulness in policy planning.

Despite the increase in popularity of Zero Waste (ZW) concept, the successful implementation of this concept in waste management is still facing many challenges. The plastic recycling rate in Australia is currently only about 9.4%, which could leave up to 90.6% of plastic consumption being sent to landfills. The state of Victoria (in Australia) has proposed an ambitious plan to upgrade its waste and recycling system and to divert about 80% of waste from landfills by 2030. The aim of this research is to study Victoria’s current waste management plan and to develop a simulation model to assess the feasibility of it achieving zero plastic waste by 2035. In this direction, a fundamental knowledge of global ZW implementation needs to be acquired in order to understand the challenges, obstacles, and uncertainties in achieving ZW target. A simulation model is established using a method called double baselines. This method was developed as an improvisation to address the limitation of data availability for the model development. The model will run on 4 scenarios including one from Victoria’s current plan. Outcomes from the model are produced in comparative charts covering 6 key considerations including the rates of plastic consumption, waste to landfill, diversion, recycling, relative accumulative cost and effort. The findings of this study pointed out that Victoria’s current plan are feasible for its goal and presented with opportunities for improvement especially towards zero plastic waste. Besides, study results also reveal that the Victoria’s current plan to achieve 80% diversion rate by 2030 is possible but the zero plastic waste target by 2035 is less likely to happen.

Promoter is a small region of DNA sequence in response to various transcription factors, which initiates a particular gene expression. The promoter-engineered bio-sensor can activate or repress gene expression through transcription factor recognizing specific molecules, such as polyamine, sugars, lactams, amino acids, organic acids or redox molecule, however, the reported applications of promoter enhanced bio-sensor are not too much. This review paper highlights the strategies of construction of promoter-gene engineered bio-sensor with human and bacteria’s genetic promoter array for high-throughput screening (HTS) molecular drugs, study of membrane protein’s localization and nucleocytoplasmic shuttling mechanism of regulating factor, enzyme activity, detection of the toxicity of intermediate chemicals, and probing bacteria density to improve value-added product titer. These bio-sensors’s sensitivity and specificity can be further improved by proposed approaches of Mn²⁺ and Mg²⁺ added random Error-prone PCR and site-directed mutagenesis which is applied for construction of bacteria’s “mutant library”. It is expected to establish flexible HTS platform (Bio-sensor array) to large-scale screen transcription factor-acting drugs, reducing the toxicity of intermediate compounds, and constructing gene dynamic regulatory system in “push and pull” mode to effectively regulate the valuable medicinal product production. This proposed novel promoter-engineered biosensors aided synthetic genetic circuit construction will maximize the efficiency of bio-synthesis of medicinal compound, which will greatly promote the development of microbial metabolic engineering and biomedical science.

The HS-SPME GC-MS analysis of the volatile compounds adsorbed at the outer surface of lemon and grapefruit pectins obtained via hydrodynamic cavitation of industrial waste streams of lemon and grapefruit peels in water only suggests important new findings en route to understanding the powerful and broad biological activity of these new pectic materials. In agreement with the ultralow degree of esterification of these pectins, the high amount of highly bioactive α-terpineol and terpinen-4-ol points to limonene decomposition catalyzed by residual citric acid in the citrus waste peel residue of the juice industrial production.

This study investigates the impact of Foreign Direct Investment (FDI) on economic growth and examines the causality between FDI and economic growth in Bangladesh during 1972-2013. Gross Domestic Product (GDP), export performance (EXP), Foreign Direct Investment (FDI), and Gross Fixed Capital Formation (GFCF) are considered to capture the objective of the study. The study methodology includes some systematic steps. As the data used in the study is time-series in nature, the author employs unit root tests, and in this case, Augmented Dickey-Fuller (ADF) and Phillips-Perron (PP) tests are used. Then Johansen’s cointegration test, Granger causality test, regression with Newey-West Standard Error and Vector Error Correction Model (VECM) are applied. By using the ADF and PP test the study reveals that the variables of four-time series are integrated of I (1) i.e. they are stationary at first difference. Regression analysis result demonstrates that FDI has a positive effect on economic growth. The Granger Causality test discloses that there is a unidirectional relationship between FDI and economic growth. But the VECM estimation finds that in the long run FDI negatively affects economic growth.

The World economy after global crisis of 2008–2009 entered a restructuring era. It defines relevance of researches of its directions and patterns. The principles of determinism and systemic analysis are methodological basis of article. In research were used the methods of processing Big Date, as of continuous changes and the symmetric analysis of macroeconomic indicators according to databases of the IMF, WB, BIS, the Central banks and treasuries. As a result of the research it is proved that depth and globalism of recessionary processes are caused by a combination of crisis of world financial system and civilization problems. Intrinsic signs of risks in the modern economy caused by the duality of the nature of global crises have been identified. There are analyzes: the deficit of resources of the international financial institutions, a negative role of a fixed rate of Yuan, a big share of derivatives and off-balance obligations of banks, use of SPV in structures of deals, growth of debt obligations, trade wars, slowdown in the growth of the Chinese economy, aggravation of contradictions between global and national finances. The thesis is reasonable that deglobalization and dedollarization deepened this conflict, started the rollback mechanism from achievements of globalization, led to tariff wars. By means of a systematization it is proved the key directions of the restructuring of global economy: legal basis, leadership and reserve currency. On the basis of SWOT-analysis of the USA and China it was concluded that the question of leadership of one country should be excluded, but slow transition to use SDR (with a basket from 15–20 currencies) as a reserve.

This study aims to determine the Implication of innovation, proactivity, risk-taking, artistic orientation, and financial literacy on creative economy businesses during the COVID-19 pandemic. This was conducted on 120 creative economy businessmen in Bandar Lampung City, which is a miniature of Indonesia with multiethnic cultures. The results showed innovation is not significant, but proactive attitude, artistic orientation, and financial literacy have a significant implication on the performance of creative economic businesses during the Covid-19 pandemic.

Based on the Organizational Support Theory, this study examines the relationship between human resource management practices and service performance of sharing workers by demonstrating the mediation role of work engagement. We tested this theoretical model using an in-person interview questionnaire survey of 318 downwind drivers. Results showed that: (1) the main effect of human resource management practices of sharing workers on service performance was significant; (2) work engagement played a prominent mediation role between human resource management practices and service performance of sharing workers; (3) the mediation role of employee vigor between the platform incentives and the performance of employee services was significant; (4) employee dedication had an obvious and indirectly positive mediating effect between sharing workers' dimensions of human resource management practice and their service performance; (5) employee absorption on the mediation role between the various dimensions of the sharing human resources management practices (platform support, platform incentives and platform constraints) and employee service performance was significant. This study has important value for the study on human resource management practices in the context of sharing economy, and provides practical enlightenment for employee management of the sharing economy platform.

The Circular Economy is matter of recent discussions and quite popular, however the meaning has not been understood by most Business stakeholders. This Case study proposes to illustrate the Circular Economy importance and its status now. The contribution that UAE education sector can make to the Circular Economy is immense and is the focus of this study. Circular Economy awareness and its inner meaning can be only spread by the education sector and the author emphasizes the role of the education can play in implementing the Circular Economy. The study shows the way for the future Managers and Business stakeholders to participate in this crucial endeavor of Businesses to follow the Circular Economy. The ADKAR change management can be adopted to inspire the CE initiatives of the UAE Education sector.

Arguments of Mises and Hayek, who opposed the planned economy (PE), are used in the paper as a starting point for establishing the objective area of effective application of the PE. The abstract model of PE, based on the definitions of Mises and Hayek, leads to the conclusion that for the effective use of PE, it must be a part of mixed economy and it must produce a limited amount of essential goods of irreducible demand. These goods must be distributed among all members of society free of charge, evenly, without competition. Examples of a mixed economy are given that meet this requirement. Calculations of the personal benefit in the transition to a mixed model of the economy have been carried out. The positive and negative qualities of the planned and market methods of organization are considered. Mixed economy model combines these qualities in optimal construction. An analytical framework has been introduced for the construction of product characterization curves. Such curves provide criteria for determining the efficiency of manufacturing of this product in a planned economy. The general economic prerequisites for the usability of the PE are clarified. The applicability and advantages of the PE for the organization of the universal basic income (UBI) system are demonstrated. The possibility of using PE to solve the problem of guaranteed employment is mentioned.

Remanufacturing is a viable option to extend the useful life of an end-of-use product or its parts, ensuring sustainable competitive advantages under the current global economic climate. Challenges typical to remanufacturing still persist, despite its many benefits. According to the European Remanufacturing Network a key challenge is lack of accurate, timely and consistent product knowledge as highlighted in a 2015 survey of 188 European remanufacturers. With more data being produced by electric and hybrid vehicles, this adds to the information complexity challenge already experienced in remanufacturing. Therefore, it is difficult to implement real-time and accurate remanufacturing for the shop floor; there are no papers that focus on this within an electric and hybrid vehicle environment. To address this problem this paper attempts to (1) identify the required parameters/ variables needed for fuel cell remanufacturing by means of interviews (2) rank the variables by Pareto analysis (3) develop a casual loop diagram for the identified parameters/ variables to visualise its impact on remanufacturing (4) model a simple stock and flow diagram to simulate and understand data and information-driven schemes in remanufacturing.

Literature revealed the potential of using guayule resin for asphalt cement replacement from the binder’s perspective. However, monitoring guayule resin through binder-aggregate mixture could disclose its performance through field. In this study, designated binders were employed to investigate the applicability of such an innovative replacer through mixture, which were neat asphalt and guayule-based binders (neat guayule, asphalt-rubber-guayule, guayule-rubber binders). Consecutively, field-simulated lab mixtures were prepared to investigate the major distresses. Moisture damage, rutting, fatigue cracking, and thermal cracking resistances were investigated using the modified Lottman (TSR) test, rut test by asphalt pavement analyzer (APA), semi-circular bending (SCB) test, and disk-shaped compact tension (DCT) test, respectively. Additionally, the Hamburg wheel-tracking (HWT) test was employed to evaluate moisture susceptibility and rutting resistance. Outcomes revealed that the neat guayule was susceptible to moisture damage at a 7% air content (V_a) when the TSR test was employed. In contrast, all investigated mixtures yielded perfect performances against moisture susceptibility under the HWT test. Guayule-based mixtures perfectly resisted rutting, as analyzed by the rut test and HWT test. Generally, changing parameters (e.g., V_a, rubber addition, and partial asphalt replacement by guayule and rubber) enhanced the guayule-based mixture resistance to rutting and moisture damage resulting in acceptable performances. Guayule-based mixture had a high fracture toughness at low temperatures, hence fatigue fracture resistance at intermediate temperatures. Neat guayule mixture with or without rubber addition did not entirely resist thermal fracture. However, partial asphalt replacement by guayule and rubber resisted the thermal fracture to a great extent.

The new climate law introduces a policy of sustainable construction, the assumption of which is the reduction of CO2 by the construction industry and the use of environmentally friendly materials, such as agricultural, mineral, and recycled waste, while limiting the consumption of natural resources. The article is a literature review that analyzes selected waste materials from various sectors of the economy that can be used as additives or partial substitutes for natural resources in the production of cement and in and cement building materials, the production of which reduces CO2 emissions, producing materials with high mechanical strength and environmentally friendly.

Use of porous titanium (Ti) and Ti alloys in orthopedic implants or in light structures requires processing routes that could generate an as-much-as possible control in the pores amount, shape, size and connectivity. In this work, a colloidal approach to the processing of Ti porous structures by the inside foaming of a porogen into a gelled high solid content aqueous suspension of Ti powders, is presented. The prepared slurries contained different amounts of Methyl Cellulose (MC) as gelling agent (8, 10 and 12 g/L) and ammonium bicarbonate (BA) as porogen (15, 20, 25 wt. %). The gel-casted samples were heated at mild temperatures ranging (60, 70 and 80 °C) to promote the gelation and produce, at the same time, the porosity by the thermal decomposition of the ammonium bicarbonate. Different structures are obtained depending on the combination of the study variables

Aflatoxins are a known cause of primary liver cancer in Mozambique since pre-independence epidemiological studies. However, their impact goes beyond the public health, affecting the country’s economy and raising legal concerns. As a developing country endemic for Aspergillus, the nation has been struggling to keep pace with external trade quality demands, delicate policy making, still dealing with the farmers’ limitations to control the contamination. The contamination shows variations over time, space and the different commodities. Considering the recommendations of the Codex Alimentarius, the major crops will be highly implicated unless there is major intervention from the authorities to control the toxins.

Bio-separation of natural molecules as well as clinical compounds has been constantly developed in last decades. Several techniques are available but the majority of them presents drawbacks such us impossibility to be applied for industrial purposes. The main limitations for the scaling up are high costs and the fact that the devices work with microfluid dynamics. Nevertheless, magnetic bio-separation is considered the most prone to be used for large scale applications. Herein, we propose a simple magnetic separation method that is not based on microfluid dynamics, can work in a continuous- and high-flow rate and can be easily automated in order to be used for standard separation purposes. It is based on the use of an anisotropic flexible ferric magnetic strip, Teflon hoses and a pumping device. We show the modelling of the separation process along with an experimental test on iron oxide magnetic particles. The results showed that it is possible to remove, and separately collect, more than 92% of magnetic particles from a liquid solution of 100 ml in roughly 15 minutes.

High density polyethylene (HDPE) and poly(lactic) acid (PLA) blends with different ratios of both polymers, namely 30:70, 50:50 and 70:30, were produced. Polyethylene grafted maleic anhydride and a random copolymer of ethylene and glycidyl methacrylate, were also proposed as compatibilizers to modify HDPE-PLA optimal blends and were added in the amounts of 1, 3 and 5 wt.%. Blends properties have been evaluated through different aspects by performing tensile tests, scanning electron microscopy to analyze blend morphology and interfaces, and thermomechanical analysis through differential scanning calorimetry, thermo-gravimetric analyses and infrared spectroscopy. The second blend, the one with equal amounts of HDPE and PLA seems to represent a good balance between high amount of bio-derived charge and acceptable mechanical properties. This suggests a good potential of these blends, which would be a good starting point for the production of composites with lingo-cellulosic fillers.

In the book “Everyhing Is A Circle: A New Model For Orbits Of Bodies In The Universe”, and further in the Article “Distance Between Two Circles in Any Number of Dimensions is a Vector Ellipse”, it has been mathematically demonstrated that “distance between points on any two different circles in any number of multiple dimensions” is equivalent to “distance of points on a vector ellipse from another fixed or moving point”. Using this mathematical methodology, a method is provided in this Article as a measure for the amount of interaction between two international economies, which are two countries or economic zones, by modelling each economy in terms of a “circle in four dimensions”. Based on this method, the proximity of the two economies at the end of each fiscal period, which is generally a fiscal year, is then measured by the distance between points at the end of the given period on the two circles in four dimensions, associated with these two economies in our model.

The Circular Economy of plastics is a promising concept that has the potential to reduce pollution and close the loop on plastic waste. However, further research is needed to develop more efficient and environmentally friendly methods of recycling plastic. This review article discusses the Circular Economy of plastics, its potential benefits and drawbacks, and the challenges that need to be addressed to make it a reality. Some case studies are also examined to explore how the Circular Economy of plastics has been implemented across the globe.

Bio-surfactants are surface-active molecules which are produced by the wide range of microbes including bacteria, fungi, and yeast. This study was conducted to identify bio-surfactants by Bacillus subtilis combined with use of cheap substrates and industrial wastes (Mustard cake, Whey and Soya cake) which are found locally in Nepal. Bacillus subtilis, one of the most potential bio-surfactants producer; was isolated from soil sample of hydrocarbon contaminated site. Isolates were grown in a Minimal Salt Media (MSM) with 10% (v/v) mustard oil cake, whey and soya cake separately. The presence and potential of surfactant was determined by the oil spreading technique, emulsification index (%E24) and surface tension measurement. It was revealed that the surface tensions of cell free extract were 54.41, 60.02 and 56.64 mN/m for from mustard cake, whey and soya cake respectively as compared to distilled water (72.09) at 25oC. The emulsification index values are was found to be highest in engine oil from the bio-surfactant extracted from mustard cake, soya cake and whey respectively. Similarly, mustard oil showed the lowest value of emulsification index. The highest emulsification activity was shown in mustard oil i.e. 1.13 from the cell free extract from mustard oil and lowest in engine oil i.e., 0.07, by the extract from soya cake medium, when measured in spectrophotometer at 540 nm. In conclusion, strain of Bacillus subtilis was found to be the potential surface active agent producers on the mustard oil cake, which can be useful medium for various environmental, food and industrial processes.

In this study we investigated the potential of two non-edible oil extracts from seeds of Colliguaya Integerrima (CIO) and Colliguaja Salicifolia (CSO) to use as a renewable source for polyols and eventually polyurethane foams or biodiesel. For this purpose, two novel polyols from the aforementioned oils were obtained in a one-single step reaction using a mixture of hydrogen peroxide and acetic acid. The polyol derivatives obtained from the two studied oils were characterized by spectral (FT-IR, ¹H NMR and ¹³C NMR), physico-chemical (e.g. chromatographic analysis, acid value, oxidizability values, iodine value, peroxide value, saponification number, kinematic viscosity, theorical molecular weights, density, hydroxyl number and hydroxyl functionality) and thermal (TGA) analyses according to standard methods. Physico-chemical results revealed that all parameters, with the exception of the iodine value, were higher for bio-polyols (CSP and CIP polyols) compared to the starting oils. The NMR, TGA and FT-IR analyses demonstrated the formation of polyols. Finally, the OH functionality values for CIP and CSP polyols were 4.50 and 5.00, respectively. This result indicated the possible used of CIP and CSP polyols as a raw material for the preparation of polyurethane rigid foams.

For every three people on the planet there is approximately two Tonne (Te) of available plastic waste. We show that carbon recovery from polystyrene (PS) plastic is enhanced by the co-addition to solvents to grow carbon nanotubes (CNTs) by liquid injection chemical vapour deposition. Polystyrene was loaded up to 4 wt% in toluene and heated to 780 °C in the presence of a ferrocene catalyst and a hydrogen/argon carrier gas in a 1:19 ratio. High resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and Raman spectroscopy were used to identify multi-walled carbon nanotubes (MWCNTs). The PS addition in the range from 0 to 4 wt% showed improved quality and CNT homogeneity; Raman “Graphitic/Defective” (G/D) values increased from 1.9 to 2.3; mean CNT diameters increased from 43.0 to 49.2 nm; and maximum CNT yield increased from 11.3% to 14.2%. Since both the CNT diameters and the percentage yield increased with respect to polystyrene addition, we conclude that carbon from the PS contributes to the carbon within the MWCNTs. The electrical contact resistance of acid washed Bucky papers produced from each loading, ranged from 2.2 to 4.4 Ohm, with no direct correlation to PS loading. Due to this narrow range, the materials with different loading were mixed to create six wires of an Ethernet cable and tested using iPerf to give uplink and downlink speeds of ~99.5 Mbps, comparable to Cu wire of identical dimension (~99.5 Mbps). The lifecycle assessment (LCA) of CNT wire production was compared to copper wire production for the use case in a Boeing 747-400 over the lifespan of the craft. Due to their lightweight nature the CNT wires decreased the CO2 footprint by 21 kTonne (kTe) over the aircraft lifespan.

According to a number of authors, current social-economic and environmental problems require radical solutions, including the change of our approach to economy and looking for new models of its functioning. In Poland such trends are being recognised as well, having their reflection in the economic life. An approach described in this article concerns an intermediate sharing model, which may be placed between the most archetypical sharing, which is applied, among other, in family relationships, and sharing platforms that are raising growing controversies, such as UBER and Airbnb. The article uses the analysis of solutions applied in this regard in Poland and a survey carried out among students of the Faculty of Economics, University of Gdańsk, aimed at determining factors that affect changes in consumer behaviour.

Cotton is a potential and excellent candidate to balance both agricultural production and reme-diation of mercury-contained soil, as its main production fiber hardly involve into food chains. However, there is known rarely about the tolerance and response to Hg environments in cotton. In this study, The biochemical and physiological damages, in response to mercury (Hg), were investigated in upland cotton seedlings. The results on cottonseeds germination, indicated the germination rate were suppressed by high Hg levels, as the decrease of percentage was more than 10% at 1000 µM Hg. Shoots and roots’ growth were significantly inhibited above 10 µM Hg. The inhibitor rates (IR) in fresh weight were close between shoots and roots, whereas that in dry weight the root growth was more obviously influenced by Hg. In comparison of organs, the growth inhibition ranked as root > leaf > stem. The declining of translocation factor (TF) op-posed the Hg level even as low to 0.05 at 50 µM Hg. The assimilation of cotton plants was af-fected negatively by Hg toxicity, as evidenced from the performances on photosynthesis pig-ments (chlorophyll a and b) and gas exchange (Intercellular CO2 concentration (Ci), CO2 assimila-tion rate (Pn) and stomatal conductance (Gs)). Sick phenotypes on leaf surface included small white zone, shrinking and necrosis. Membrane lipid peroxidation and leakage were Hg dose-dependent as indicated by malondialdehyde (MDA) content and relative conductivity (RC) values in leaves and roots. More than 10 µM Hg damaged antioxidant enzyme system in both leaves and roots (P<0.05). Concludingly, 10 µM Hg post negative consequences to upland cotton plants in growth, physiology and biochemistry, whereas high phytotoxicity and damage ap-peared at more than 50 µM Hg concentration.

The impact of nanomaterials on lung fluids or on the plasma membrane of living cells has prompted researchers to examine the interactions between nanoparticles and lipid vesicles. Recent studies have shown that nanoparticle-lipid interaction leads to a broad range of structures including supported lipid bilayers (SLB), particles adsorbed at the surface or internalized inside vesicles, and mixed aggregates. Today, there is a need to have simple protocols that can readily assess the nature of structures obtained from particles and vesicles. Here we apply the method of continuous variation for measuring Job scattering plots and provide analytical expressions for the scattering intensity in various scenarios. The result that emerges from the comparison between modeling and experimental measurements is that electrostatics plays a key role in the association, but it is not sufficient to induce the formation of supported lipid bilayers.

The idea of replacing the broken linear economy with circular forms to help address the current sustainability crisis is gaining world-wide traction in policy, industry, and academia. This article presents results from an international interview study with 34 repair practitioners and experts in different fields. The article aims to improve understandings of the potential of repair so as to contribute to a more just, sustainable, and circular economy. Through a five-step qualitative method the results reveal and explore three tensions inherent in repair: first, repair activities constitute different forms of subjectivity; second, repair entails different and sometimes contested temporalities; and finally, even though repair is deeply political in practice, the politics of repair are not always explicit, and some repair activities are actively depoliticized. The opportunities and obstacles embodied in these tensions are generative in repair practices and debates, but poorly reflected in contemporary circular economy discourse. We conclude that a richer, more inclusive and politicized understanding of repair can support environmental justice in the implementation of CE and provide greater opportunities for just and transformational sustainability strategies and policies.

It is widely accepted that plastic waste is one of our most urgent environmental concerns the world is currently facing. Plastic has contributed greatly to innovation in all fields, but the raw material for its production (fossil fuels), as well as the linear economy in which it is currently produced and used, makes the material problematic from a sustainability and human health perspectives. The emergence of bio-based plastics provides an opportunity to reduce dependency on fossil fuels and transition to a more circular plastics economy. For polyethylene terephthalate (PET), one of the most prevalent plastics in packaging and textiles, there exist two bio-based alternatives that are similar or superior in material property and recyclability. These are polyethylene furanoate (PEF) and polytrimethylene terephthalate (PTT). The overarching aim of this study was to examine the transition from fossil-based to renewable plastics, through the lens of PET upcycling into PEF and PTT. The process for the production of PEF and PTT from three feed streams (post-consumer PET waste, lignocellulosic biomass-derived cellulose and biodiesel-derived crude glycerol) was developed in the software SuperPro Designer and the economic viability assessed via a discounted cumulative cash flow (DCCF) analysis. This study represents a conceptual case study of the valorisation of existing plastic waste into new, recyclable bio-based plastics, for a more sustainable plastics production. A techno-economic analysis of the designed process revealed that the minimum selling price (MSP) of second generation-derived PEF and PTT is 3.13 USD/kg, and that utilities and the feedstock used for the production of 2,5-furandicarboxylic acid (FDCA) needed in PEF synthesis contributed the most to the process operating costs. The effect of recycling PEF and PTT through the process at three recycling rates (42%, 50% and 55%) was investigated and revealed that increased recycling could reduce the MSP of the 2G bio-plastics (by 48.5%) to 1.61 USD/kg. This demonstrates that increasing recycling rates would have a beneficial effect on the economic viability of the plastic biorefinery.

. In this article, a search for a calculation method and an analysis of performance indicators of mutual investment funds is carried out. Many factors can influence the return on investments in portfolio investments, which makes the choice of the fund incredibly difficult. However, in addition to the fact that it is difficult to determine which indicators should be given more attention and which should be omitted, it is not so easy to get these data. Some of them are publicly available on the Internet, while others can only be found in trading systems that are not accessible to people outside of this area. The article proves that a well-trained neural network can easily find existing patterns between risk and expected return on investment. It is a well-trained neural network that provides the ability to use the "what-if" function to justify your choice on real factors, as well as the ability to download available data and calculate the estimated income and its changes. This makes it much easier to choose a Fund, especially for inexperienced investors. The article also presents the results of a study of the dependence of estimated income on correlation, standard deviation, and volatility using a trained neural network. According to the theory, higher values of these three factors correspond to a higher amount of income. The obtained graphs of the calculated income dependence on correlation, standard deviation, and volatility confirmed the correctness of the neural network training and compliance with the relations described in the theory. The paper presents graphs of the dependence of the estimated income on the beta and alpha coefficients. The higher the beta and alpha indicators, the higher the expected return on investment. This corresponds to the dependency accepted in the model. When the values of the beta and alpha coefficients increase, the income also increases, which is completely consistent with the theory.

This is a study of Political Economy on religion and migration management in the United States of America (USA). This paper offers a review of migrants-citizens relations in the USA, with attention to the pendulum effect, moving from integration policies (open doors and melting pot agenda) to official persecution (raids and deportations), with a high social opportunity cost. There has been a split between the State and civil society, causing civil disobedience and sanctuary network across the country. Also, it is paid attention to the American post-modern paradox, as a result of culture wars and identity politics that imply a violation of American constitutional principles (i.e. religious liberty, freedom of movement, to pursuit the happiness). Special attention is paid to the development of the Sanctuary Movement, as an ongoing example of the sociocultural upheaval bringing grassroots society into confrontation with powerful elites by promoting resistance and offering help to the needy, even if this results in sanctions. This movement was revitalized after the values crisis of 2008, but it has also been polarized between those who follow the traditional approach to socio-religious action in the form of peaceful civil disobedience, and those who follow the ideological anti-system and communitarian approach, which causes greater tension for the immigrants themselves

The collaborative economy comprises resource circulation systems where consumers can act as both obtainers and providers of products and services. Despite considerable research on collaborative economies, there is a dearth of understanding of how individuals switch from being an obtainer to a provider. We address this void by drawing on 31 in-depth semi-structured interviews with collaborative economy obtainers. The findings suggest that personal values, learning experience, social benefits, mutuality, and peer influence drive obtainers to become providers. In contrast, distrusting strangers, a sense of intimacy, a lack of resources to share, and a lack of skills inhibit the switchover process. Our findings contextualize the drivers and inhibitors idiosyncratically to convert obtainers into providers, offer important implications for managers, contribute to the collaborative economy and sharing economy literature, and suggest compelling avenues for future research.

The aim of this study was to investigate the effect of condensed tannin (CTs) with differing molecular weight on their capacity to modify the fatty acid profile in milk. Twenty multiparous crossbred lactating dairy goats were assigned in a randomized complete block design (RCBD), and were subjected to receive the dietary treatments as followings; T1: control (with no CTs supplementation), T2: supplemented with mangosteen peel in a concentrate as a source of low molecular weight CTs at level of 3.0 %DM of CTs equivalent, T3: supplemented with the same diet with T2 but added with polyethylene glycol (PEG, as tannin inactivator) as the control of T2, and T4: supplemented with quebracho CT extract (UNITAN ATO, Buenos Aires, Argentina; 75-77 % tannins) in a concentrate as a source of high molecular weight CTs at level of 3.0 %DM of CTs equivalent, and T5) supplemented with the same diet with T4 but added with PEG as the control of T4. No significant change was detected for feed intake and nutrient digestibility indicate that CTs at level of 3.0 %DM of diet did not showed the detrimental effect to feed intake and nutrient digestibility, however, ruminal fermentation parameters and milk yield and milk compositions did not affected by different source of CT inclusion.

The transportation sector significantly contributes to greenhouse gas emissions, thus imposing sig-nificant environmental hazards. In response, many nations have begun promoting Electric Vehicles (EVs) as an ecologically sustainable substitute for traditional combustion vehicles. Lithium-Ion Batteries (LIBs), characterized by their high energy density, extended lifespan, and relatively low self-discharge rate, have become the suitable energy storage system for EVs, advancing the field of sustainable transportation. The decreasing cost of LIB production has primarily driven this progression, realized through a combination of economies of scale, advancements in electrode materials and cell design, and re-finements in manufacturing processes. All these elements collectively contribute to the cost reduc-tion of LIBs. A foreseeable implication of this trend is an expected surge in LIBs that will exhaust their operational lifespan and, consequently, be cast away into the environment. One mitigating strategy for this impending environmental issue involves collecting these spent EV batteries, re-configuring them, and repurposing them for applications with less rigorous weight, performance, and size prerequisites. This approach would not only prolong the utility life of the batteries but also ameliorate their environmental impacts. Nevertheless, second-life batteries are anticipated to exhibit a higher rate of gas evolution, necessitating comprehensive testing and readjustments to ensure safe operation in secondary ap-plications. The regulatory framework encompassing the second-life battery sector still needs to be defined regarding norms, technical standards, and legislation. This paper aims to elucidate the primary regulations and technical standards proposed thus far in the second-life battery marketplace. The results underscore the exigency for neutral evaluative entities, such as universities, research centers, and governmental institutions, to perform an unbi-ased assessment of the second-life battery market. This would pave the way for novel technical standards and legislative measures specifically tailored to this emerging sector.

The natural forests of Northern Thailand are the mother source of many utilisable natural products because of their diverse flora and fauna. Among many plant species found within Northern Thai forests, detergent plants are known for its distinctive cleansing properties. Several local species of detergent plants in Thailand are traditionally used by the locals and indigenous people. However, these plants may become extinct because their habitats have been replaced by industrial agriculture, and their uses have been replaced by chemically synthesised detergents. Researchers need to study and communicate the biology, phytochemistry, and the importance of these plants to conserve natural biodiversity of Northern Thailand. Of many utilisable detergent phytochemicals, natural saponins are known as bio-surfactant and foaming agents. Their physiochemical and biological properties feature structural diversity, which leads to many industrial applications. In this review, we explained the term “detergent” from the physiological mechanism perspective and the detergent effects of saponin. We also compiled a list of Thai local plants with cleansing properties focusing on the saponin-containing plants. Future studies should investigate information relative to plant environment, ethnobotanical data and bioactive compound content of these plants. The knowledge acquired from this study will promote the maintenance of the local biodiversity and the conservation of the detergent plant species found in Thailand.

Carboxylic acids such as acetic acid and propionic acid have been investigated as representative components for fast pyrolysis (FP) bio-oil upgrading. Selective catalytic conversion of carboxylic acids can enhance bio-refinery processing economics through catalyst preservation and process intensification. Various metal-doped molybdenum carbide bead catalysts have been synthesized and developed in this work. Our aim is to enable selective conversion of carboxylic acids. In the case of acetic acid conversion, calcium doped Mo₂C beads offer the highest yield of acetone ~96% at 450 °C among undoped and Ca or Ni doped catalysts. By comparing hot gas filter with and without Ca-Mo₂C catalyst tested with real FP vapors, the former showed a 36.7% reduction of acetic acid, a 37.5% reduction of small ketones in aqueous phase, and a ~50% reduction of methoxies (methoxy phenols and methoxy aromatics) in organic phase. The conversion resulted in the formation of more long chain chemicals in the organic phase, which are more amendable for downstream upgrading.

Rice is considered as the most important crop for most of the world population. Utilization of seaweed as bio-stimulant can be an alternative way to enhance rice plant growth and productivity, as well as a strategic move to reduce the use of inorganic fertilizer that is harmful to the environment. Seaweed and its derivative products have been widely used as bio-stimulant in the agricultural industry because of their potential use in increasing plant growth and productivity. Auxins, gibberellins, and cytokinin are some of growth regulators found in seaweed extract, as well as macro and micronutrients required for plant growth and development. Several studies have found that seaweed extract has a variety of favorable effects as a plant growth promoter, including early seed germination and establishment, improved nutritional quality, increased yield and crop performance, and increased tolerance to environmental stress. The purpose of this paper is to give a comprehensive overview of the impacts of several seaweed species on seed germination, crop development and production, enhancement of rice plants (Oryza sativa) nutritional quality and the modes of action of seaweed extract includes the chemical components that might be causing plant physiological changes.

It shows the monetary investigation in west countries the big flow in economy by the gross value change effects, also the value of debt policy with debt management strategies to control the budgetary risk of long-term economy from sustainability. The intellectual policies of inflation, GDP, trade, and services and merchandise trade has effected on the West African country’s monetary policies. The implication of trade by a lag of exchange rate indicators has a positive and significant effect. The estimated results reflect the dynamic implication of trade with liquidity and proper monitoring policies. The GDP, gross value (GVA), debt policies, equity of public administration, trade in service and merchandise trade is positive and significant, all are significant. We suggest the optimum control of liquidity with trade service policy recommendations in different countries. The research method was based on 5 countries from the 16 countries of western African and elaborated by their individual indicators with the least square method. The gross value of debts and public administration controlled the development aim of an entire state with strategic and planned environment for state and reduce the level of inflation in small and enterprise section and the results analyzed the policy makers implement planned in implication of trade with domestic currency and long run endogeneity. The results analyzed the monetary policies affecting the level of growth of an individual country.

In recent years, Parkinson's Disease (PD) as a progressive syndrome of the nervous system has become highly prevalent worldwide. In this study, a novel hybrid technique established by integrating a Multi-layer Perceptron Neural Network (MLP) with the Biogeography-based Optimization (BBO) to classify PD based on a series of biomedical voice measurements. BBO is employed to determine the optimal MLP parameters and boost prediction accuracy. The inputs comprised of 22 biomedical voice measurements. The proposed approach detects two PD statuses: 0– disease status and 1– reasonable control status. The performance of proposed methods compared with PSO, GA, ACO and ES method. The outcomes affirm that the MLP-BBO model exhibits higher precision and suitability for PD detection. The proposed diagnosis system as a type of speech algorithm detects early Parkinson’s symptoms, and consequently, it served as a promising new robust tool with excellent PD diagnosis performance.

The managers’ strategic behavior of commercial real estate in a competitive environment is discussed. The means of this research are methods of mathematical and experimental game theory. Illustrates an example of a decision-theoretic game problem with two players engaged in the management of competing shopping centers. The strategies of these players are determined by the costs of the development. Since the number of visitors is constantly and changing the quality of shopping centers, managers actually pull visitors from each other, the game-theoretical formulation of the problem of management of shopping centers corresponds to the zero-sum game. The model example shows that with the help of mathematical modeling it is possible to determine the theoretical expected behavior of agents. The model of the software module created specifically for experimental research is described. The experiments are designed to compare the theoretically predicted behavior with the real actions of people. The novelty is that at significant costs of the Manager for the development and promotion of shopping and entertainment centers, the strategies of managers are resistant to each other's actions, in contrast to changes in the external environment is shown.

In this study, we aimed to identify the factors affecting the night-time economy in Hanoi to achieve the sustainable development of this economy. We surveyed four selected groups of subjects: people, tourists, business establishments, and managers in Hanoi City, in which tourists were nationwide but have been on a night tour in Hanoi. We chose a nonrandom convenience sample. With the above sample size, the number of respondents was insufficient, so we selected districts with potential for night economic development including Hoan Kiem, Tay Ho, Dong Da, Nam Tu Liem, Ha Dong, and Gia Lam. We obtained 463 usable surveys. We processed and analyzed the data using SPSS Statistics 26.0 software. Our quantitative study included: (1) testing the suitability of the scale for the variables using Cronbach’s alpha, (2) analyzing the EFA factors to check the convergence of the observed variables and the separation between the independent variables, (3) checking the correlation to evaluate the problem of multicollinearity of the model; , and (4) performing regression analysis to evaluate the impact of the factors on night-time economic development in Hanoi City. The results showed that the variables positively impacted night-time economic development in Hanoi, but we found differences in the levels of their impact. Among the four factors, factor 3 (promotion and sharing) had the strongest impact on night-time economic development, followed by factor 2 (infrastructure and safety), factor 1 (institutions and environment), and factor 4 (nature and resources.)

Integrated photovoltaic-fuel cell (IPVFC) systems, amongst other integrated energy generation methodologies are renewable and clean energy technologies that have received diverse research and development attentions over the last few decades due to their potential applications in a hydrogen economy. This article systematically updates the state-of-the-art of IPVFC systems and provides critical insights into the research and development gaps needed to be filled/addressed to advance these systems towards full commercialisation. The design methodologies, renewable energy-based microgrid and off-grid applications, energy management strategies, optimisations and the prospects as self-sustaining power source were covered. IPVFC systems could play an important role in the upcoming hydrogen economy since they depend on solar hydrogen which has almost zero emissions during operation. Highlighted herein are the progresses as well as the technical challenges requiring research efforts to solve to realise numerous potential applications of IPVFC systems such as in unmanned aerial vehicles, hybrid electric vehicles, agricultural applications, telecommunications, desalination, synthesis of ammonia, boats, buildings, and distributed microgrid applications.

Surface Plasmon Resonance (SPR) is an attracting property of certain transition metals when they are synthesized in nano-range giving rise to promising optical applications. However, most SPR and associated applications are limited to the noble metal nanoparticles, which limits their potential due to high production cost. We report surface plasmon resonance in copper-copper oxide core-shell quantum dots synthesized via chemical route studied by using UV-Visible spectrophotometry. Tuning of the plasmonic resonance with respect to the particle diameter is achieved by an inexpensive all chemical route. Photoluminescence measurements also support the data. This size reduction leads to remarkable changes in its optical response as compared to the bulk metal. The results point towards applications of these materials in tunable SPR based biosensors.

This study analyses the case study of a deconstruction project called the ‘Whole House Reuse’ (WHR) which aimed, firstly, to harvest materials from a residential house, secondly, to produce new products using the recovered materials, and thirdly, to organize exhibition for the local public to promote awareness on resource conservation and sustainable deconstruction practices. The study applies characterization of recovered materials through deconstruction. In addition to the material recovery, the study assesses the embodied energy saving and greenhouse gas emission abatement of the deconstruction project. Around twelve tonnes of various construction materials were harvested through a systematic deconstruction approach, most which would otherwise be disposed to landfill in the traditional demolition approach. The study estimates that the recovered materials could potentially save around 502,158MJ of embodied energy and prevent carbon emission of around 27,029kg (CO2e). Deconstruction could eventually contribute to New Zealand’s national emission reduction targets. In addition, the project successfully engages local communities and designers to produce 400 new products using the recovered materials and exhibited to the local people. The study concludes that there is a huge prospect in regard to resource recovery, emission reduction, employment and small business opportunities using deconstruction of the old house. The socio-cultural importance of the WHR project is definitely immense; however, the greater benefits of such projects are often ignored and remain unreported to wider audiences as most of the external and environmental costs have not been considered in the traditional linear economy. It is acknowledged that under a favourable market condition and with appropriate support from local communities and authorities, deconstruction could contribute significantly to resource conservation and environmental protection despite its requirement of labour intensive efforts.

In this article, a search for a calculation method and an analysis of performance indicators of mutual investment funds is carried out. Many factors can influence the return on investments in portfolio investments, which makes the choice of the fund incredibly difficult. However, in addition to the fact that it is difficult to determine which indicators should be given more attention and which should be omitted, it is not so easy to get these data. Some of them are publicly available on the Internet, while others can only be found in trading systems that are not accessible to people outside of this area. The article proves that a well-trained neural network can easily find existing patterns between risk and expected return on investment. It is a well-trained neural network that provides the ability to use the "what-if" function to justify your choice on real factors, as well as the ability to download available data and calculate the estimated income and its changes. This makes it much easier to choose a Fund, especially for inexperienced investors. The article also presents the results of a study of the dependence of estimated income on correlation, standard deviation, and volatility using a trained neural network. According to the theory, higher values of these three factors correspond to a higher amount of income. The obtained graphs of the calculated income dependence on correlation, standard deviation, and volatility confirmed the correctness of the neural network training and compliance with the relations described in the theory. The paper presents graphs of the dependence of the estimated income on the beta and alpha coefficients. The higher the beta and alpha indicators, the higher the expected return on investment. This corresponds to the dependency accepted in the model. When the values of the beta and alpha coefficients increase, the income also increases, which is completely consistent with the theory.

Natural cycles underpin the very stuff of life. In this commentary we consider unnatural cycles: that is, anthropogenic activities which have a circularity, but whose nature is to have a detrimental effect on human health, exacerbating existing problems. Natural cycles have feedback loops, some of which have recently come to light, with an understanding that everything is connected in some way. In health, feedback loops are imperative in homeostatic mechanisms. However, in the unnatural cycle the feedback loops serve to reinforce (and in some cases amplify) negative problems. We offer a commentary on an unnatural cycle moving from air quality to lung function and back to air quality; we call this the lung disease unnatural cycle. We suggest where links occur, and where wider consideration of interactions between various disciplines can lead to breaking this unnatural (or vicious) cycle, changing it to a healthy cycle where individual health can be improved, along with better global scale outcomes. We suggest that many activities within this unnatural cycle occur within silos. However, the improved cycle incorporates joint activities at geological, health, and financial levels, to the mutual benefit of all, breaking the unnatural cycle, and improving health, life and financial costs.

This conceptual article is aimed at evaluating the COVID19 impacts on the global economy and to postulating an ‘economic paradigm shift’. We argue that the existing economic, political, and trade principles have been challenged due to the global pandemic issue. We also compare the COVID19 impact on Western countries and Eastern countries with their control mechanisms. The emerging of new economies is due to the travel restrictions and disrupt of the global economies are discussed that pave a gateway to the economic paradigm shift. The article finally assesses the advent of 5G technology and its implications to face any future health threats that will lead to the next economic paradigm shift in the modern world.

Among the various methods for collecting oil spills and oil products, including from the water surface, one of the most effective is the use of sorbents. In this work, three-component bio-based composite granular adsorbents were produced and studied for oil products pollution collection. A bio-based binder made of peat, devulcanised crumb rubber from used tyres, and part fly ash as cenospheres were used for absorbent production. The structure, surface morphology, porosity, mechanical properties, and sorption kinetics of the obtained samples were studied. Composite hydrophobicity and sorption capacity to oil products such as diesel fuel (DF) and motor oil (MO) were determined. The obtained pellets are characterised by a sufficiently pronounced ability to absorb oil products such as DF. As the amount of CR in the granules increases, the diesel absorption capacity increases significantly. The case of 30-70-0 is almost 3 times higher than the granules from homogenised peat. The increase in q is due to two factors: pronounced surface hydrophobicity of the samples (Θ = 152°) and a heterogeneous porous granule structure. The presence of the cenosphere in the biocomposite reduces its surface hydrophobicity while increasing the diesel absorption capacity. Relatively rapid realisation of the maximum saturation by the MO was noted. In common, the designed absorbent shows up to 0.7 g·g^-1 sorption capacity for MO and up to 1.55 g·g^-1 sorption capacity for diesel. A possible mechanism of DF absorption and the limiting stages of the process approximated for different kinetic models are discussed. The Weber-Morris diffusion model is used to primarily distinguish the limiting effect of external and internal diffusion of adsorbate on the absorption process

The growing concern about climate change and the recognition of the planet’s limits led society to look for alternatives that promote the balance between the natural and the built environment. The circular economy emerges as an alternative to the linear economic model, inspired by natural metabolisms, by circulating resources in continuous loops, where their intrinsic value is maintained and improved. This research proposes a closed-loop strategy in the built environment by studying innovative constructive solutions that aim to find use, value, and inspiration in what is considered waste. A literature review is conducted on the circular design strategies, re-use and recycle typologies, and waste transformation processes. Then, the development of a methodology for qualitative evaluation and selection of re-used and upcycled construction materials from post-consumer waste and by-products is presented and then applied to thirty-five cases of constructive solutions from plastic, wood, paper, steel, aluminium, and agricultural waste. The research reports that the developed framework is adequate. The analysed alternative materials have good environmental performance and can be used as building materials despite their functional limitations, reflecting the enormous potential of waste as a resource for the construction industry.

To contribute to small and medium enterprises (SMEs) sustainable transition into the circular economy, the study proposes the activation of organizational learning (OL) processes – denoted here as multi-level knowledge creation, transfer, and retention processes – as a key phase in introducing circular business models (CBMs) at SME and supply chain (SC) level. The research employs a mixed-method approach, using the focus group methodology to identify contextual elements impacting on CBM-related OL processes, and a survey-based evaluation to single out the most frequently used OL processes inside Italian construction SMEs. As main result, a CBM-oriented OL multi-level model offers a fine-grained understanding of contextual elements acting mutually as barriers and drivers for OL processes, as possible OL dynamics among them. The multi-level culture construct – composed of external stakeholders’, SC stakeholders’, and organizational culture – identify the key element to activate CBM-oriented OL processes. Main implications are related to the identification of cultural, structural, regulatory, and process contextual elements across the external, SC, and organizational levels, and their interrelation with applicable intraorganizational and interorganizational learning processes. The proposed model would contribute to an improved implementation of transitioning into the circular economy utilizing sustainable business models in the construction SMEs.

The excessive use of synthetic insecticides in modern agriculture has led to the contamination of the environment and the development of insect resistance. In this study, we evaluated the potential of tangerine (Citrus reticulata L.) peel essential oil (EO) as a natural insecticide against greenhouse whitefly (Trialeurodes vaporariorum W. (Homoptera: Aleyrodidae)), a common pest in greenhouse production. Petroleum ether (PET) and n-hexane (HEX) were used as solvents to extract essential oil (EO) from tangerine peels. The yield of EO was 1.59 % and 2.00 % (m/m) for PET and HEX, respectively. The insecticidal activity of EO was evaluated by measuring the mortality rate (MR) of greenhouse whiteflies at different time intervals. The results showed that PET and HEX extracts of tangerine EO effectively controlled the greenhouse whitefly. With both solvents, it was observed that with doses of 12.5% (v/v), similar results were achieved as with the positive control (corresponding to the commercial insecticide imidacloprid). Additionally, the FTIR analysis found that the EO contained d-limonene, which may be the source of its insecticidal properties. Therefore, tangerine peel essential oil is an excellent natural insecticide candidate for controlling greenhouse whiteflies effectively and sustainably.

The shape of the knee is a chain-like structure of an ellipsoid. This suggests that, in the latest study, in addition to rolling, there is slippage in the motion of the knee. This paper selects a mechanical braking model for cattle based on two mechanical structures in different directions at the joints. The experimental results show that the modified dynamical system has strong chaotic properties. This can be one of the basis for judging various health states.

Carbon nanotubes have been attracting considerable interest among material scientists, physicists, chemists and engineers for almost 30 years. Owing to their high aspect ratio, coupled with remarkable mechanical, electronic and thermal properties, carbon nanotubes have found application in diverse fields. In this review, we will cover the work on carbon nanotubes used for sensing applications. In particular, we will see examples where carbon nanotubes act as main players in devices sensing biomolecules, gas, light or pressure changes. Furthermore, we will discuss how to improve the performance of carbon nanotube-based sensors after proper modification.

Reactive transport (RT) couples bio-geo-chemical reactions and transport. RT is important to understand numerous scientific questions and solve some engineering problems. RT is highly multidisciplinary, which hinders the development of a body of knowledge shared by RT modelers and developers. The goal of this paper is to review the basic conceptual issues shared by all RT problems, so as to facilitate advance along the current frontier: biochemical reactions. To this end, we review the basic equations to point that chemical systems are controlled by the set of equilibrium reactions, which are easy to model, but whose rate is controlled by mixing. Since mixing is not properly represented by the standard advection-dispersion equation (ADE), we conclude that this equation is poor for RT. This leads us to review alternative transport formulations, and the methods to solve RT problems using both the ADE and alternative equations. Since equilibrium is easy, difficulties arise for kinetic reactions, which is especially true for biochemistry, where numerous frontiers are open (how to represent microbial communities, impact of genomics, effect of biofilms on flow and transport, etc.). We conclude with the basic 10 issues that we consider fundamental for any conceptually sound RT effort.

Burning woody biomass for energy is gaining attention due to environmental issues associated with fossil fuels and carbon emission. The carbon released from burning wood is absorbed by plants and is carbon neutral. The purpose of this study was to investigate the combustion characteristics (heat calorific values and ash contents) of three timbers: Araucaria cunninghamii, Instia bijuga and Pometia pinnata and recommend for fuelwood. The test samples were sawdust particles (treatment) and solid woods (control) extracted from the heartwoods. The sawdust particles were oven-dried, sieved and pelletized into pellets using a hand-held pelletizing device, thus, forming cylindrical dimension (volume 1178.57 mm3, oven dry density 0.0008 g/mm3). While the solid woods were cubed and oven-dried (volume 1000.00 mm3, oven dry density 0.001 g/mm3). Prior to combustion in a semi-automatic bomb calorimeter, 90 test specimens (15 replicates per treatment and control per species) were conditioned to 14 % moisture content (at temperature 105 ºC) and weighed to a constant (unit) mass (1.0 g). The heat energy outputs and ash residues (of treatments) were analyzed statistically. The results indicated variability in heat energy outputs and ash residues between test specimens of the three species. Comparatively, the treatment specimens of A. cunninghamii produced higher calorific value (18.546 kJ/g) than the control (18.376 kJ/g) whilst the treatment specimens of I. bijuga and P. pinnata generated lower heat calorific values (17.124 kJ/g and 18.822 kJ/g) than the control (18.415 kJ/g and 20.659 kJ/g), respectively. According to ash content analysis, A. cunninghamii generated higher residues (6.3%) followed by P. pinnata (4.5%) and I. bijuga (2.8%). The treatment specimens of the three species could not meet the standard heat energy requirement (20.0 kJ/g) and thus, were unsuitable for fuelwood. However, the control specimens of P. pinnata generated equivalent heat energy (20.659 kJ/g) and could be a potential fuelwood.

In this study, effluent water was produced through Submerged Membrane Bio-Reactor (SMBR) process, which is a simple system and decomposes organic matter contained in wastewater with biological treatment process and performs solid-liquid separation, Especially, ozone oxidation treatment process is applied to effluent water containing fluorescent whitening agent, which is a trace pollutant which is not removed by biological treatment, and influences the quality of reused water. The concentration of COD in the SMBR was 449.3 mg/ℓ-COD, and the concentration of permeate water was 100.3 mg/ℓ-COD. The removal efficiency was about 70.1%. The amount of ozone re- quired for the removal of the fluorescent whitening agent in the permeated water in SMBR was 6.67 g-O3/min, and the amount of ozone required to remove COD relative to the permeate water was calculated to remove 0.997 mg-COD for 1 mg of O3.

Life cycle assessment (LCA) is used frequently as a decision support tool for evaluating different design choices of products based on their environmental impacts. A life cycle usually comprises several phases of varying timespan. The amount of emissions generated from different life cycle phases of a product could be significantly different from one another. In conventional LCA, the emissions generated from the life cycle phases of a product are aggregated at the inventory analysis stage, which is then used as an input for life cycle impact assessment. However, when the emissions are aggregated, the temporal variability of inventory data is ignored, which may result in inaccurate environmental impact assessment. Besides, the conventional LCA does not consider the environmental impact of circular products with multiple use cycles. It poses difficulties in identifying the hotspots of emission-intensive activities with the potential to mislead conclusions and implications for both practice and policy. To address this issue and to analyse the embedded temporal variations in inventory data in a CE context, the paper proposes to calculate the emission intensity for each life cycle phase. It is argued that calculating and comparing emission intensity, based on the timespan and amount of emissions for individual life cycle phases, at the inventory analysis stage of LCA offers a complementary approach to the traditional aggregate emission-based LCA approach. In a circular scenario, it helps to identify significant issues during different life cycle phases and the relevant environmental performance improvement opportunities through product, business model and supply chain design.

Nations of the world have seen unprecedented changes in climate variables in recent decades. But it is unclear to what extent climate change has impacted and will impact food systems in some developing regions, and how policymakers can frame an approach to encouraging adaptation and advancing climate-smart agriculture. Many studies attempting to link agroecology to climate change adaptation do so without understanding the potential of Agroecology not only to mitigate climate change – which is the weak response – but to reverse its impact and ‘climate proof’ our food systems. By modeling the near and far future impacts of climate change on crop production, we showed how climate will impact crop production under two crop production systems (agroecology and non-agroecology production systems). The overarching aim is to derive sustainable development strategies and lessons for policymakers and climate researchers - essential components of environment and Agricultural development. Using case studies from Nigeria, we observed that transitioning to agroecology, even at the farm level also transforms farm designs, thereby affecting their overall food and nutrition status. The result showed that the use of agroecology management practices not only reduces the impact of climate change in the near future but will also lead to increased crop yield in the future. The finding suggests that to feed the over 400 million projected population of Nigeria by 2050, the use of agroecological practices will be a better alternative to the conventional farming methods. To advance the use of agroecological farming methods, governments at every level in Nigeria need to mainstream organic agriculture in national government policies. This is important as it will not only address climate change impacts but also hunger and poverty.

The incorporation of nanomaterials on (bio)sensors based on composite materials has led to important advances in analytical chemistry field due to the extraordinary properties that these materials offer. Nanodiamonds (NDs) are a novel type of material that has raised much attention, as they have the possibility of being produced on large scale by using relatively inexpensive synthetic methodologies. Moreover, NDs present some other interesting features as suitability for fluorescence due to surface functionalization and a proved biocompatibility, which makes them well suited for biomedical applications. In addition, NDs can be modified with metallic nanoparticles (NP), such as silver or gold, in order to combine the special features of both. The aim of this research work is the nanostructuration of novel sensing devices using NDs combined with silver (Ag@NDs) and gold (Au@NDs) nanoparticles. A complete morphological and electrochemical characterization as function of the prepared nanocomposite composition have been performed in order to improve the electroanalytical properties of the developed (bio)sensors.

End-of-life electric vehicle (EV) batteries can be reused to reduce their environmental impact and economic costs. However, the growth of a second-life market is limited by the lack of information on the characteristics and performance of these batteries. As the volume of end-of-life EVs may exceed the amount of batteries needed for stationary applications, investigating the possibility of repurposing them in mobile applications is also necessary. This article presents an experimental test that can be used to collect the data necessary to fill a battery passport. The proposed procedure can facilitate the decision making process regarding the suitability of a battery for reuse at the end of its first life. Once the battery passport has been completed, the performance and characteristics of the battery are compared with the requirements of several mobile applications. Mobile charging stations and forklift trucks were identified as relevant applications for the reuse of high capacity prismatic cells. Finally, a definition of a state of health (SoH) is proposed to track the suitability of the battery during use in the second life application considering not only energy but also power and efficiency of the battery. This SoH shows that even taking into account accelerated ageing data, a repurposed battery can have an extended life of 11 years at 25~°C. It has also been shown that energy fade is the most limiting performance for lifetime and that cell-to-cell variation should be tracked as it has been shown to have a significant impact on battery life.

Ca-bentonite (CB) alone and in a mixture with limestone (L), tobacco biochar (TB) and zeolite (Z) on the fixation, geochemical fractions and absorption of Cd and Zn by Chinese cabbage in smelter heavily polluted (S-HP) and smelter low polluted (S-LP) soils were investigated. The results showed that the CB+TB and CB+L+TB treatments significantly immobilized Cd up to 22.03% and 29.68%, respectively, and reduced uptake by Chinese cabbage shoot to 35.98% with CB+Z+L and 61.35% with CB+L in S-HP and S-LP soils compared with the control. The CB+ Z+ L+TB treatment mobilized Cd up to 4.45% and increased absorption in the shoot by 9.85% in S-HP soil. The greatest immobilization of Zn was 53.18% and 58.20% with the CB+Z+L+TB treatment, which reduced Zn uptake in the plant shoot by 9.94% with CB + L and 58.04 with CB+Z+L+TB in S-HP and S-LP soils. The CB+Z+TB and CB+TB treatments mobilized Zn up to 35.40% and 4.80%, respectively, in both soils. Furthermore, the uptake of Zn in plant shoot was observed by 58.96% and 7.82% with application of CB+Z and CB+TB treatments, respectively, in S-HP and S-LP soils. Overall, our results suggest that Ca-bentonite alone and in mixtures with different amendments can be used to reduce the phyto-extraction of Cd and Zn in Zn-smelter polluted soils.

In this paper, the far field and near field optical responses of a gold nanoparticle are studied and simulated numerically. The electromagnetic field was excited by an electric dipole located near one end of the nanorod, which is used to model the emission of a quantum dot. Another excitation method was also simulated in which an incident plane wave is used. The excitation of dark plasmon modes of the gold nanorod is presented. The Poynting equation was solved numerically to study the influence of the gold nanorod on the dipole radiative power. In addition, the extinction cross section of the gold nanoparticle illuminated by the incident plane wave was calculated to estimate the amount of the scattered and absorbed light.

The circular supply chain was applied to many industries in the past studies, whereas the rubber recycling industry has not been explored in detail yet. Therefore, this study indentified the key factors of the circular supply chain used in remanufactured products, thereby perfecting its framework. This study put forward 5 aspects and 19 criteria for reference, so that companies in the rubber recycling industry are able to clearly know the direction of implementation when con-structing the circular supply chain for remanufactured products. This study integrated expert opinions with the fuzzy Delphi method and the fuzzy decision making trial and evaluation laboratory proposed key factors, and performed the ranking of importance. The results have displayed that key aspects include the circular business model (A3), increasing the value of resources in the supply chain (A4), and risk management of the circular supply chain (A2). The factors that the rubber recycling industry needs to pay attention to are: optimizing the production process (C2), sharing data in the product lifecycle (C4), effectively tracking and recycling products (C5), redesigning remanufactured products (C13), enhancing resource efficiency (C16), and identifying waste composition and separating materials (C14) . Based on the abovementioned, we had a discussion in this study.

The species and bio-availability of phosphorus (P) in primary, secondary and digested sludge were fractionated and further analyzed in this study. Results showed that inorganic P (IP) was the primary P fraction in the secondary sludge and digested sludge, in which non-apatite IP (NAIP) amounted to 91.6% and 69.3% of IP, respectively. Organic P (OP), accounting for about 71.7% of total P (TP), was the dominant P composition in primary sludge. The content of bio-available P was about 9.7, 43.4, 29.8 mg-P/g-TS in primary sludge, secondary sludge and digested sludge, respectively, suggesting secondary sludge is the optimal choice when land application of sewage sludge is taken into consideration, followed by digested sludge and primary sludge. Polyphosphate and orthophosphate, comprising approximately 54.3% and 89.2% of TP, was the dominant P species in the secondary sludge and digested sludge, respectively. Monoester-P (54.6% of TP in extract) and diester- P (24.1%) were identified as OP species in primary sludge by Phosphorus-31 nuclear magnetic resonance (31PNMR). The present results would be helpful for P recovery and recycle from sewage sludge in wastewater treatment plant.

Almost fifty years after the first installations, I identify the main lessons learned from fighting drought and poverty in Africa with direct solar-powered pumps thanks to Father Bernard Verspieren and Mali Aqua Viva. Six main findings and three main recommendations emerge from the present analysis which are of direct relevance to all Africa’s countries whose population has gone from 438 million in 1977 to 1308 million in 2019, with about 600 million still having no access to electricity. In place of “awareness campaigns”, I recommend to organize practice-oriented workshops on solar-powered irrigation and rainwater harvesting held by professional educators of newly established solar energy national institutes. In agreement with today’s expanded approach to education in solar energy, and with the key adult learning principle of motivation to learn, said education will include the economic and social aspects of distributed “generation” of energy and water from sunlight and rainfall.

Composites with HDPE and PLA matrix have been tested to analyse the effect of natural fillers (wood flour, recycled waste paper and a mix of both fillers) and temperature on polymer degradation. Composting tests have been performed in both mesophilic (35°C) and thermophilic (58°C) conditions. Degradation development has been evaluated through mass variation, TGA and DSC. HDPE, as expected, did not display any relevant variation, confirming its stability under our composting conditions. PLA is sensibly influenced by temperature and humidity, with higher reduction of Mw when composting is performed at 58°C. Natural fillers seem to influence degradation process of composites, already at 35°C. In fact, degradation of fillers at 35°C allows a mass reduction during composting of composites, while neat PLA do not display any variation.