Background: Coronavirus disease 2019 (COVID-19) pandemic are causing significant damages to many nations. For mitigating its risk, Japan’s Prime Minister called on all elementary, junior high and high schools nationwide to close beginning March 1, 2020. However, its effectiveness in decreasing disease burden has not been investigated. Methods: We used daily data on the report of COVID-19 and coronavirus infection incidence in Japan until March 31, 2020. Time series analysis were conducted using Bayesian method. Local linear trend models with interventional effect were constructed for number of newly reported cases of COVID-19, including asymptomatic infections. We considered that the effects of intervention start to appear 9 days after the school closure; i.e., on March 9. Results: The intervention of school closure did not appear to decrease the incidence of coronavirus infection. If the effectiveness of school closure began on March 9, mean coefficient α for effectiveness of the measure was calculated to be 0.08 (95% credible interval -0.36 to 0.65), and the actual reported cases were more than predicted, yet with rather wide credible interval. Sensitivity analyses using different dates also showed similar results. Conclusions: School closure carried out in Japan did not show the effectiveness to mitigate the transmission of novel coronavirus infection.

The emerging new Coronaviridae member, nCoV 19, outbreak announced a pandemic by WHO with an increased morbidity and mortality rate worldwide. nCoV 19 known as the third highly pathogen coronavirus in the human population after the severe acute respiratory syndrome coronavirus (SARS-CoV) and the Middle East respiratory syndrome coronavirus (MERS-CoV), the nCoV 19. The renin-angiotensin (RAS) signaling pathway, oxidative stress and cell death, cytokines storm and endothelial dysfunction are four major pathways involved in the pathogenesis of nCoV 19. Acute respiratory distress syndrome (ARDS) generally develops with a massive oxidative/nitrosative stress following virus entry and RAS activation. The DNA damage subsequent to oxidative burst activates poly-ADP ribose polymerase-1 (PARP-1), viral macrodomain (NSP3) poly (ADP-ribose) glycohydrolase (PARG) and transient receptor potential channel, melastatin 2 (TRPM2) in a sequential manner ultimately leading to apoptosis and necrosis due to NAD and ATP depletion. Regarding the molecular mechanisms involved in nCoV 19 pathogenesis, angiotensin II receptor blockers and/or PARP, PARG and TRPM2 blockers could be engaged as therapeutic candidates for inhibition of RAS and quenching oxidative stress, respectively. In this review, the molecular aspects of nCoV 19 pathogenesis would be studied precisely and possible therapeutic targets would be proposed. It is recommended to evaluate the proposed drugs and supplements via registered clinical trials along with conventional guideline-based multi-drug regimen.

Time is a component quantity of various measurements and is also used on its own to sequence events, to compare the duration of events or the intervals between them, and to quantify rates of change of quantities in material reality or in the conscious experience [1]. The measuring equipment well might happen to be a clock. By making a presupposition that clock is Time, it is perceived experimentally that “Time exhibits wave-like properties”

Since mid-December of 2019, coronavirus disease 2019 (COVID-19) has been spreading from Wuhan, China. As of February 21, total 75,773 confirmed cases worldwide have spread to more than two dozen countries. Transmission of COVID-19 can occur early in the course of infection since SARS-CoV-2 viral loads in asymptomatic patients are similar to that in the symptomatic patients. Therefore, more sensitive diagnostic methods are needed to detect early phase of the infection to prevent secondary or tertiary spreads. Here, we compare the RT-PCR confirmatory test results using two different SARS-CoV-2 viral RNAs from two Korean COVID-19 confirmed cases.RT-PCR method targeting the RdRP gene, which was recommended by WHO guideline, was less sensitive than targeting N genes (as per CDC guideline). Because many countries follow the WHO guideline, our findings may contribute to the early diagnosis of COVID-19.

Flavonoids are major secondary metabolites in plants, which play important roles in maintaining the cellular redox balance in cells. Chalcone synthase (CHS) is the key enzyme in the flavonoids biosynthesis pathway, and has been proved to monitor the changes to drought stress tolerance. In this work, we overexpressed a CHS gene in tobacco (Nicotiana tabacum). The transgenic tobacco plants were more tolerant than the control plants to drought stress. The transcription levels of the key genes involved in the flavonoids pathway and the contents of seven flavonoids were also significantly raised in the transgenic tobacco plants. In addition, overexpression of the CHS gene lead to a lower concentration of the oxidative stress product malondialdehyde. Overall, the NtCHS gene studied in this work was considered as a candidate gene for genetic engineering to enhance drought tolerance of plants and improve response to oxidative stress.

Objective: SARS-Cov-2 infection or COVID-19 is a global pandemic. From the time of identification to till, multiple clinical symptoms and parameters have been identified by the researchers of various countries and regions regarding the diagnosis and presentations of COVID-19 disease. In this manuscript, we investigated the primary symptoms and basic hematological presentations of SARS-CoV-2 infection among the Bangladeshi patients. Methodology: We have collected the disease history of mild to moderate degree of COVID-19 patients; hematological and biochemical on admission reports of moderate degree COVID-19 patients. All of them were tested positive for SARS-CoV-2 by RT-PCR in different institutes in Bangladesh. Results: According to this study though COVID-19 patients in Bangladesh commonly presented with fever, cough, fatigue, shortness of breath, and sore throat, but symptoms like myalgia, diarrhea, skin rash, headache, Abdominal pain/cramp, nausea, vomiting, restlessness, and a higher temperature of >100⁰F have a greater presentation rate and more frequent than other published studies. CRP and Prothrombin time was found to increase in all the patients. Serum ferritin, ESR, SGPT, and D-Dimer were found increased among 53.85%, 80.43, 44%, and 25% patients respectively. 17.39% of the patients had leukocytosis and neutrophilia. 28.26% of patients presented with lymphocytopenia. 62.52% of patients had mild erythrocytopenia. Conclusion: Despite some similarities, our study has evaluated a different expression in presenting symptoms in the case of COVID-19 patients in Bangladesh. CRP, Prothrombin time, serum ferritin, ESR, SGPT, D-Dimer, erythrocytopenia, and lymphocytopenia can be initial diagnostic hematological findings and assessment for prognosis COVID-19 disease. Also, gender variations have a different scenario of clinical and laboratory appearance in this region.

Abstract: Background: Exposure to ETS (Environmental Tobacco Smoke) is one of the most toxic environmental exposures. Objective: To investigate the impact of ETS on physiological, biochemical, psychological indicators, on the urine antioxidant capacity (AC) and oxidative damage to lipids in a pilot sample of healthy pregnant women. Methods: The exposure to ETS was investigated by a validated questionnaire, urine cotinine and the marker of oxidative damage to lipids - 8-isoprostane concentrations using an ELISA kit. Urine AC was determined by the spectrophotometric TEAC method. From the sample of pregnant women (n=319, average age 30.84 ± 5.09 years) in 80 the levels of cotinine and oxidative stress markers were analyzed. Results: From our sample, 5 % individuals (7.4 % objectified by cotinine) were current smokers and 25 % reported passive smoking in the household (18.8 % objectified by cotinine). The Kappa was 0.78 for smokers and 0.22 for ETS exposed non-smokers. Smokers as well as non-smokers had significantly higher (p<0.05) urine AC than ETS exposed non-smokers. Non-smokers had significantly lower levels of 8-isoprostane than smokers (p<0.01) and ETS-exposed non-smokers (p<0.05). Correlations between urine levels of cotinine and AC were positive in ETS exposed non-smokers. Conclusion: The harmful effect of active and passive smoking on oxidative stress parameters has been indicated.

This paper is aimed at studying the temporal evolution of the surface displacements occurred over the past few years in the ocean-reclaimed platforms of the Shanghai megacity (China), which are mainly ascribable to consolidation processes of large dredger fills and alluvial deposits. With respect to previous analyses carried out over the same area, this work provides a joint multi-platform differential interferometry synthetic aperture radar (DInSAR) analysis, based on the application of the advanced Small BAseline Subset (SBAS) algorithm. This led us to retrieve long-term deformation time-series that are helpful for a better understanding of the on-going deformation phenomena. To this aim, we have exploited two sequences of SAR data collected by the ASAR/ENVISAT and by the COSMO-SkyMed (CSK) sensors, respectively, spanning the whole time period from 2007 to 2016. Unfortunately, the large time gap (of about three years) existing between the available ASAR/ENVISAT and CSK datasets gave rise to additional difficulties for their combination. Nevertheless, this problem has been faced by benefiting from the knowledge of a time-dependent model describing the temporal evolution of the expected deformations affecting the Shanghai ocean-reclaimed platforms.

The world is currently, subjected to the worst health crisis documented in modern history; an epidemic led by the novel coronavirus disease 2019 (COVID-19). At the epicenter of this crisis, healthcare professionals continue working to safeguard our well-being. To the regular high levels of stress, COVID new heights even more to healthcare professionals so depending on the area, specialty, and type of work. Here we investigated what are the tendencies, or areas most affected. Through an adaptation of the original COVID-stress scale, we developed a remote, fast test designed for healthcare professionals of the Northeastern part of Mexico, an important part of the country with economic and cultural ties to the US. Our results showed 4 key correlations as highly dependent: Work area – Xenophobia (p &lt; 0.045), Work with COVID patients - Traumatic stress (p &lt; 0.001) and Total number of COVID patients per day – Traumatic stress (p &lt; 0.027), and Total number of COVID patients - Compulsive checking and reassurance. Overall concluding that normal levels of stress have increased (mild – moderate). Additionally, we further determine that the fear of being an asymptomatic patient (potential to spread without knowing) continues being a concern.

Space-time evolution is briefly explained by using the 3-dimensional quantized space model (TQSM) based on the 4-dimensional (4-D) Euclidean space. The energy (mass), charges and absolute time are newly defined based on the 4-D Euclidean space. The photons and gravitons are understood as the 2-D space fluctuations along the space axes and 1-D time fluctuations along the time axis, respectively. This indicates that the electromagnetic (EM) and gravitational (G) waves can be unified into the so called gravityelectromagnetic (GEM) wave which has both space and time fluctuations. The photon with zero force fields is the 2EM wave because an EM wave corresponds to a charged fermion. The dark matter bosons, weak force bosons, strong force bosons are the 1-D time fluctuations which can be expressed by the G waves. This indicates that all five forces are unified by the GEM wave. It is called as the super unification theory in the present work. And the force carrying bosons and mesons are, for the first time, proposed as the possible candidates of the magnetic monopoles like the fermions and baryons are the electric monopoles. The signs of the magnetic charges quantized as q_m=cq are newly defined. The big bang is understood by the space-time evolution of the 4-D Euclidean space but not by the sudden 4-D Minkowski space-time creation. The big bang process created the matter universe with the positive energy and the partner anti-matter universe with the negative energy from the CPT symmetry.

Three-dimensional quantized space model is newly introduced. Quantum mechanics and relativity theory are explained in terms of the warped three-dimensional quantized spaces with the quantum time width (Dt=t_q). The energy is newly defined as the 4-dimensional space-time volume of E = cDtDV in the present work. It is shown that the wave function of the quantum mechanics is closely related to the warped quantized space shape with the space time-volume. The quantum entanglement and quantum wave function collapse are explained additionally. The special relativity theory is separated into the energy transition associated with the space-time shape transition of the matter and the momentum transition associated with the space-time location transition. Then, the quantum mechanics and the general relativity theory are about the 4-dimensional space-time volume and the 4-dimensional space-time distance, respectively.

This review deals with the adaptive mechanisms that plants can implement to cope with the challenge of salt stress. Plants tolerant to NaCl implement a series of adaptations to acclimate to salinity, including morphological, physiological and biochemical changes. These changes include increases in the root/canopy ratio and in the chlorophyll content in addition to changes in the leaf anatomy that ultimately lead to preventing leaf ion toxicity, thus maintaining the water status in order to limit water loss and protect the photosynthesis process. Furthermore, we deal with the effect of salt stress on photosynthesis and chlorophyll fluorescence and some of the mechanisms thought to protect the photosynthetic machinery, including the xanthophyll cycle, photorespiration pathway and water-water cycle. Finally, we also provide an updated discussion on salt-induced oxidative stress at the subcellular level and its effect on the antioxidant machinery in both salt-tolerant and salt-sensitive plants. The aim is to extend our understanding of how salinity may affect the physiological characteristics of plants.

Each year, the global population and agriculture suffer critical agricultural output losses as a result of severe drought devastation. Physiological drought occurs when plants are unable to extract water from the soil, even though it is available in the root zone. Apart from having a significant effect on plant physiology, drought stress has the effect of reducing crop yield. Drought stress influences plant metabolism both directly and indirectly. Drought stress alters the morpho-anatomical, physiological, and biochemical composition of plants, thereby decreasing transpiration water loss and increasing the efficiency with which plants use their water. Constant water loss through transpiration, combined with previously lost water, results in leaf water deficits. Nonetheless, drought stress has a wide variety of effects, ranging from lesions to confusion. Plant health is harmed when their ability to absorb water and nutrients, interact with their environment, and breathe is harmed. Apart from oxidative damage to plants, it may also result in cell death, which can occur under certain conditions when cells are exposed to their environment. Drought induces a plethora of physiological and molecular changes in plants, the majority of which assist them in adapting to the harsh environment. To mitigate drought's adverse effects, we must first gain a better understanding of how drought affects plant physiology. The purpose of this research is to better understand how drought affects plant development by examining the causes and effects of drought stress.

This paper aims to determine the insecticidal activity of Panyawan (Tinospora rumphii) leaf extract against American cockroach (Periplaneta americana). A quantitative experimental research design was employed in the study. Cockroach strains were collected through trapping and hand catch methods. Panyawan leaf was collected and extracted to achieve seven different concentrations. The concentrations and controls were tested against the strains through the standard contact glass jar bioassay. Results revealed that the shortest knock-down time was achieved by the positive control at 1.08 minutes while the Extracts of Panyawan leaf reported a 1.42 to 20.25 minutes knock-down time. Probit Regression reported that the lethal concentration 50 of Panyawan leaf extract was 15.836%. One-Way ANOVA revealed that there is a significant difference in the knock-down times of cockroaches when exposed to different Panyawan leaf extract concentrations, negative and positive controls (p<0.01). Homogeneous subsets derived from Post Hoc Test using Tukey’s Honest Significant Difference reported that there is no significant difference between positive control and Extract 100% (p>0.01).

This paper presents an approach to the Kirchhoff-Love plate theory (KLPT) using the finite difference method (FDM). The KLPT covers the case of small deflections, and shear deformations are not considered. The FDM is an approximate method for solving problems described with differential equations. The FDM does not involve solving differential equations; equations are formulated with values at selected points of the structure. Generally in the case of KLPT, the finite difference approximations are derived based on the fourth-order polynomial hypothesis (FOPH) and second-order polynomial hypothesis (SOPH) for the deflection surface. The FOPH is made for the fourth and third derivative of the deflection surface while the SOPH is made for its second and first derivative; this leads to a 13-point stencil for the governing equation. In addition, the boundary conditions and not the governing equations are applied at the plate edges. In this paper, the FOPH was made for all of the derivatives of the deflection surface; this led to a 25-point stencil for the governing equation. Furthermore, additional nodes were introduced at plate edges and at positions of discontinuity (continuous supports/hinges, incorporated beams, stiffeners, brutal change of stiffness, etc.), the number of additional nodes corresponding to the number of boundary conditions at the node of interest. The introduction of additional nodes allowed us to apply the governing equations at the plate edges and to satisfy the boundary and continuity conditions. First-order analysis, second-order analysis, buckling analysis, and vibration analysis of plates were conducted with this model. Moreover, plates of varying thickness and plates with stiffeners were analyzed. Finally, a direct time integration method (DTIM) was presented. The FDM-based DTIM enabled the analysis of forced vibration of structures, with damping taken into account. In first-order, second-order, buckling, and vibration analyses of rectangular plates, the results obtained in this paper were in good agreement with those of well-established methods, and the accuracy was increased through a grid refinement.

Pneumonia is a severe lower respiratory tract infection that is a common complication and a major cause of mortality of the vitamin C-deficiency disease scurvy. This suggests an important link between vitamin C status and lower respiratory tract infections. Due to the paucity of information on the vitamin C status of patients with pneumonia, we assessed the vitamin C status of 50 patients with community-acquired pneumonia and compared these with 50 healthy community controls. The pneumonia cohort comprised 44 patients recruited through the Acute Medical Assessment Unit (AMAU) and 6 patients recruited through the intensive care unit (ICU); mean age 68 ± 17 years, 54% male. Clinical, microbiological and haematological parameters were recorded. Blood samples were tested for vitamin C status using HPLC with electrochemical detection and protein carbonyl concentrations, a marker of oxidative stress, using ELISA. Patients with pneumonia had depleted vitamin C status compared with healthy controls (23 ± 14 µmol/L vs 56 ± 24 µmol/L, P <0.001). The more severe patients in the ICU had significantly lower vitamin C status than those recruited through AMAU (11 ± 3 µmol/L vs 24 ± 14 µmol/L, P = 0.02). The total pneumonia cohort comprised 62% with hypovitaminosis C and 22% with deficiency, compared with only 8% hypovitaminosis C and no cases of deficiency in the healthy controls. The pneumonia cohort also exhibited significantly elevated protein carbonyl concentrations compared with the healthy controls (P < 0.001), indicating enhanced oxidative stress in the patients. We were able to collect subsequent samples form 28% of the cohort (mean 2.7 ± 1.7 days; range 1-7 days). These showed no significant differences in vitamin C status or protein carbonyl concentrations compared with baseline values (P = 0.6). Overall, the depleted vitamin C status and elevated oxidative stress observed in the patients with pneumonia indicates an enhanced requirement for the vitamin during their illness. Due to the important roles that vitamin C plays in the immune system, low vitamin C status is possibly both a cause and a consequence of the disease. Therefore, these patients would likely benefit from additional vitamin C supplementation to restore their blood and tissue levels to optimal. This may decrease oxidative stress and aid in their recovery.

The crucial stages in the geochemical evolution of the Earth’s crust, ocean, and atmosphere could be explained by the assumed low-energy nuclear reactions (LENR) that are triggered by seismic activity. LENR result in the fission of medium-weight elements accompanied by neutron emissions, involving Fe and Ni as starting elements, and C, N, O as resultants. Geochemical data and experimental evidences support the LENR hypothesis. A spectral analysis of the period 1955-2013 shows common cycles between interannual changes in atmospheric CO2 growth rate and global seismic-moment release, whereas the trending behavior of the atmospheric CO2 was in response to the anthropogenic emissions. Assuming a correlation between such seismic and atmospheric fluctuations, the latter could be explained by cycles of worldwide seismicity, which would trigger massively LENR in the Earth’s Crust. In this framework, LENR from active faults could be considered as a relevant cause of carbon formation and degassing of freshly-formed CO2 during seismic activity. However, further studies are necessary to validate the present hypothesis which, at the present time, mainly aims to stimulate debate on the models which regulates atmospheric CO2.

This paper presents an approach to the Euler-Bernoulli beam theory (EBBT) using the finite difference method (FDM). The EBBT covers the case of small deflections, and shear deformations are not considered. The FDM is an approximate method for solving problems described with differential equations. The FDM does not involve solving differential equations; equations are formulated with values at selected points of the structure. Generally, the finite difference approximations are derived based on fourth-order polynomial hypothesis (FOPH) and second-order polynomial hypothesis (SOPH) for the deflection curve; the FOPH is made for the fourth and third derivative of the deflection curve while the SOPH is made for its second and first derivative. In addition, the boundary conditions and not the governing equations are applied at the beam’s ends. In this paper, the FOPH was made for all of the derivatives of the deflection curve, and additional points were introduced at the beam’s ends and positions of discontinuity (concentrated loads or moments, supports, hinges, springs, etc.). The introduction of additional points allowed us to apply the governing equations at the beam’s ends and to satisfy the boundary and continuity conditions. Moreover, grid points with variable spacing were also considered, the grid being uniform within beam segments. First-order analysis, second-order analysis, and vibration analysis of structures were conducted with this model. Furthermore, tapered beams were analyzed (element stiffness matrix, second-order analysis). Finally, a direct time integration method (DTIM) was presented. The FDM-based DTIM enabled the analysis of forced vibration of structures, with damping taken into account. The results obtained in this paper showed good agreement with those of other studies, and the accuracy was increased through a grid refinement. Especially in the first-order analysis of uniform beams, the results were exact for uniformly distributed and concentrated loads regardless of the grid. Further research will be needed to investigate polynomial refinements (higher-order polynomials such as fifth-order, sixth-order…) of the deflection curve; the polynomial refinements aimed to increase the accuracy, whereby non-centered finite difference approximations at beam’s ends and positions of discontinuity would be used.

This paper presents an approach to the Timoshenko beam theory (TBT) using the finite difference method (FDM). The Timoshenko beam theory covers cases associated with small deflections based on shear deformation and rotary inertia considerations. The FDM is an approximate method for solving problems described with differential equations. It does not involve solving differential equations; equations are formulated with values at selected points of the structure. In addition, the boundary conditions and not the governing equations are applied at the beam’s ends. The model developed in this paper consisted of formulating differential equations with finite differences and introducing additional points at the beam’s ends and at positions of discontinuity (concentrated loads or moments, supports, hinges, springs, brutal change of stiffness, spring-mass system, etc.). The introduction of additional points allowed us to apply the governing equations at the beam’s ends. Moreover, grid points with variable spacing were considered, the grid being uniform within beam segments. First-order, second-order, and vibration analyses of structures were conducted with this model. Furthermore, tapered beams were analyzed (element stiffness matrix, second-order analysis, vibration analysis). Finally, a direct time integration method (DTIM) was presented; the FDM-based DTIM enabled the analysis of forced vibration of structures, with damping taken into account. The results obtained in this paper showed good agreement with those of other studies, and the accuracy was increased through a grid refinement. Especially in the first-order analysis of uniform beams, the results were exact for uniformly distributed and concentrated loads regardless of the grid.

The importance of vertical jump in sport fields and rehabilitation is widely recognized. Furthermore, Force-Time variables of vertical jump are factors affecting jumping height. Exclusive review of each of this variables, in eccentric and concentric phases, can lead to a specific focus on them during jumping exercises. So, the aims of his study were to a) reviewing the relationship between force-time curve variables of eccentric and concentric phases with jump height and b) description of this variables in Iran national youth volleyball players society. This is an observational study. 12 elite volleyball player (Male, Iran national youth volleyball players, 17±0.7 years) have participated in this study. Correlation between Force-Time variables - included peak force (PF), relative peak force (RPP), peak power (PP), average power (AP), relative peak power (RPP), and Modified Reactive Strength Index (MRSI) - in eccentric and concentric phases and ultimate jump height has been studied. Results showed that the average power (r=0.7) and relative peak force (r=0.75) of concentric phase and MRSI (r=0.83) have significant correlation with ultimate jump height (JH). Relative peak power and average power of concentric phase can massively effect Jump Height in sports like volleyball, which vertical jump is an integral part of them. Focus on both of these factors, which has been studied in this research, in training programs, can improve athlete jump performance significantly.

Imaging lidars are one of the hottest topics in the optronics industry. The need to sense the surroundings of every autonomous vehicle has pushed forward a career to decide the final solution to be implemented. The diversity of state-of-the art approaches to the solution brings, however, a large uncertainty towards such decision. This results often in contradictory claims from different manufacturers and developers. Within this paper we intend to provide an introductory overview of the technology linked to imaging lidars for autonomous vehicles. We start with the main single-point measurement principles, and then present the different imaging strategies implemented 8 in the different solutions. An overview of the main components most frequently used in practice is also presented. Finally, a brief section on pending issues for lidar development has been included, 10 in order to discuss some of the problems which still need to be solved before an efficient final implementation.Beyond this introduction, the reader is provided with a detailed bibliography containing both relevant books and state of the art papers.

The stock beta coefficient literature extensively discusses the proper methods for the estimation of beta as well as its use in asset valuation. However, there are relatively few references with respect to the appropriate time horizon that investors should utilize when evaluating the risk-return relationship of a stock. We examine the appropriate time horizon for beta estimation differentiating our results by sector according to the Industry Classification Benchmark. We employ data from the NYSE and we estimate varying lengths of beta employing data from 30 to 250 trading days. The constructed beta series is then examined for the presence of breaks using the endogenous structural break literature. Results show evidence against the use of betas that employ more than 90 trading days of data provisional to the sector under study.

The increasingly rapid flow of technological development is now a tool to improve backwardness, renew the system, as well as a means of improvement in various aspects of life. For companies, the development of information and communication technology is a new innovation or breakthrough to improve service quality. Various benefits provided by technology and information. However, if not handled properly, technology and information will become a boomerang for an organization. HRIS is the application of HRM functions in the application of information and communication technology. The concept of HRIS as a digital form of HRM is increasing along with the outbreak of the Covid-19 pandemic which has caused a large loss impact on all lines of life. The limitation of social interaction in an effort to prevent the wider spread of covid-19 and the higher number of casualties causes business activities to stall. This research uses quantitative methods with a study sample of 100 randomly selected. This study aims to see how clarity of high-tech goals in human resources management, perceived benefits, perceived ease of use, company conditions that can influence attitudes towards HRIS.

Using recent developments in econometrics and computational statistics we consider the estimation of the instantaneous rate of asset return process when the underlying Data Generating Mechanism (DGM) is an Ornstein-Uhlenbeck process, driven by fractional noise, and sampled at fixed intervals of length h. To address the problem we adopt throughout the paper an exact discretization approach. This enable us to exploit the fact that a flow sampling scheme arises naturally when observing the DGM. For, while the instantaneous rate of return process is unobservable at points in time, its time integral over successive observations is observable since it equals the increment of log-prices. Exact discretization delivers an ARIMA(1,1,1) model for log-prices with a fractional driving noise. Building on the resulting exact discretization formulae and covariance function, a new Markov Chain Monte Carlo (MCMC) scheme is proposed and we examine the properties of both the time and frequency domain likelihoods / posteriors through Monte Carlo. For the exact discrete model we adopt a general sampling interval of length h. This allow us to determine the optimal choice of h independent of the sample size. An empirical application using high frequency stock price data is presented showing the relevance of aggregation over time issues in modelling asset prices.

In this paper, we examine the mathematical and physical consistencies of the three primary couple stress theories: original Mindlin-Tiersten-Koiter couple stress theory (MTK-CST), modified couple stress theory (M-CST) and consistent couple stress theory (C-CST). As has been known for many years, MTK-CST suffers from some fundamental inconsistencies, such as the indeterminacy of the couple-stress tensor. Therefore, despite the fact that MTK-CST has a fundamental position in the evolution of size-dependent continuum mechanics, it is not a reliable theory within continuum mechanics, for example, in developing new size-dependent multi-physics formulations. We also observe that M-CST not only inherits all inconsistences from the original MTK-CST, but also suffers from new additional inconsistencies, such as the introduction of a new non-physical governing equation. These inconsistencies refute the claim of those who state that the couple-stress tensor may be chosen symmetric. Therefore, the apparent success of MTK-CST and M-CST in describing a size-effect for some problems, such as two-dimensional plate and beam bending, is not enough to justify these theories as suitable for general cases. In fact, the symmetric couple-stresses in M-CST create torsional or anticlastic deformation, not bending. On the other hand, C-CST, with a skew-symmetric couple-stress tensor, is the consistent continuum mechanics suitable for solving different size-dependent solid, fluid and multi-physics problems.

Research within the field of hydrology often focuses on comparing stochastic to machine learning (ML) forecasting methods. The comparisons performed are all based on case studies, while an extensive study aiming to provide generalized results on the subject is missing. Herein, we compare 11 stochastic and 9 ML methods regarding their multi-step ahead forecasting properties by conducting 12 large-scale computational experiments based on simulations. Each of these experiments uses 2 000 time series generated by linear stationary stochastic processes. We conduct each simulation experiment twice; the first time using time series of 100 values and the second time using time series of 300 values. Additionally, we conduct a real-world experiment using 405 mean annual river discharge time series of 100 values. We quantify the performance of the methods using 18 metrics. The results indicate that stochastic and ML methods perform equally well.

This study explores the relationship between job satisfaction, employee loyalty and two types of flexible employment arrangements; teleworking and flexi-time. The analysis relies on data derived by the Workplace Employee Relations Survey (WERS) in 2004 and 2011. A propensity score matching and least squares regressions are applied. Furthermore, Bayesian Networks (BN) and Directed Acyclic Graphs (DAGs) are employed in order to confirm the causality between employment types explored and the outcomes of interest. Finally, an instrumental variables (IV) approach based on the BN framework is proposed and applied in this study. The results support that there is a positive causal effect from these employment arrangements on job satisfaction and employee loyalty.

This study presents the validation process of the Questionnaire on Academic Stress in Secondary Education –QASSE-, designed to assess the wide variety of school sources and situations related to academic stress in adolescence, and their relationship with students’ physical and psychological well-being. Participants were 860 Spanish high school students (52.9% girls) with an average age of 14.62 years (SD = 1.8). Through a cross-validation process, EFA and CFA supported QASSE multifactorial structure with four first-order factors -academic overload, interaction with classmates, family pressure, and future-oriented perspective- and a second-order factor of academic stress, showing a significant and intense relationship with adolescents’ psychological and physical well-being. Results also highlight the effects of the gender*educational level interaction on the students’ stress, with girls showing higher levels of stress in the transition courses between educational phases (sophomore and junior years). The QASSE demonstrates good validity and reliability, showing potential for both research and educational application. The results show the high impact of the QASSE dimensions on psychological and physical well-being in adolescence, highlighting its special usefulness for designing and adjusting educational prevention and intervention actions in this area to the students’ specific characteristics and needs

The use of Light Amplification by Stimulated Emission of Radiation (i.e., LASERs or lasers) by the U.S. Department of Defense is not new and includes laser weapons guidance, laser-aided measurements, even lasers as weapons (e.g., Airborne Laser). Lasers in support of telecommunications is also not new. The use of laser light in fiber optics shattered thoughts on communications bandwidth and throughput. Even the use of lasers in space is no longer new. Lasers are being used for satellite-to-satellite crosslinking. Laser communication can transmit orders-of-magnitude more data using orders-of-magnitude less power and can do so with minimal risk of exposure to the sending and receiving terminals. What is new is using lasers as the uplink and downlink between the terrestrial segment and the space segment of satellite systems. More so, the use of lasers to transmit and receive data between moving terrestrial segments (e.g., ships at sea, airplanes in flight) and geosynchronous satellites is burgeoning. This manuscript examines the technological maturation of employing lasers as the signal carrier for satellite communications linking terrestrial and space systems. The purpose of the manuscript is to develop key performance parameters (KPPs) to inform U.S. Department of Defense initial capabilities documents (ICDs) for near-future satellite acquisition and development. By appreciating the history and technological challenges of employing lasers rather than traditional radio frequency sources for satellite uplink and downlink signal carrier, this manuscript recommends ways for the U.S. Department of Defense to employ lasers to transmit and receive high bandwidth, large-throughput data from moving platforms that need to retain low probabilities of detection, intercept, and exploitation (e.g., carrier battle group transiting to a hostile area of operations, unmanned aerial vehicle collecting over adversary areas). The manuscript also intends to identify commercial sector early-adopter fields and those fields likely to adapt to laser employment for transmission and receipt.

Background: Clinical trails have revealed that patients with depression generally accompanied with learning and memory impairment, which critically impact on individual’s health and development. Danggui-Shaoyao-San (DSS), a famous Chinese complex prescription, significantly overcame depression and relieved cognitive disorder based on previous research and publication. However, its effectsand potential mechanism against chronic restraint stress (CRS) remained unknown. Methods: CRS animal model was established and mice were divided to six groups while they were oral administrated with Danggui-Shaoyao-San at doses of 1.25, 2.5 and 5 g/kg for 14 days. Emotional and cognitive performances were detected by behavior tests, meanwhile neural plasticity and its molecular mechanism were examined by Dil staining, western blot and immunofluorescence. Results: DSS treatment dose-dependently improved locomotion ability in open filed test, overcame depression behavior in forced swimming test and elevated plus maze test, enhanced learning and memory ability in Morris water maze test. CRS decreased number of total spines and mushroom spines, while DSS treatment dose-dependently restored these by Dil staining. Expression of BDNF and GluR1 were significantly down-regulated in CRS group, which were significantly normalized by DSS. Conclusions: DSS treatment dose-dependently reversed CRS-induced cognitive impairments by inducing structural remodeling of neurons.

Background: This study aimed to identify the association between occupational stress and depression-well-being by proposing a comprehensive and flexible job burden-capital model with its corresponding hypotheses. Methods: For this research, 1618 valid samples were gathered from the electronic manufacturing service industry in Hunan Province, China; self-rated questionnaires were administered to participants for data collection after obtaining their written consent. The proposed model was fitted and tested through structural equation model analysis. Results: Single-factor correlation analysis results indicated that coefficients between all items and dimensions had statistical significance. The final model demonstrated satisfactory global goodness of fit (CMIN/DF=5.37, AGFI=0.915, NNFI=0.945, IFI=0.952, RMSEA=0.052). Both the measurement and structural models showed acceptable path loadings. Job burden and capital were directly associated with depression and well-being or indirectly related to them through personality. Multi-group structural equation model analyses indicated general applicability of the proposed model to basic features of such a population. Gender, marriage and education led to differences in the relation between occupational stress and health outcomes. Conclusions: The job burden-capital model of occupational stress-depression and well-being was found to be more systematic and comprehensive than previous models.

This paper presents an approach to the elastic analysis of beams subjected to Saint-Venant torsion using Green’s theorem and the finite difference method (FDM). The Saint-Venant torsion of beams, also called free torsion or unrestrained torsion, is characterized by the absence of axial stresses due to torsion; only shear stresses are developed. A solution to this torsion problem consists of finding a stress function that satisfies the governing equation and the boundary conditions. The FDM is an approximate method for solving problems described with differential equations; it does not involve solving differential equations, equations are formulated with values at selected nodes of the structure. In this paper, the beam’s cross-section was discretized using a two-dimensional grid and additional nodes were introduced on the boundaries. The introduction of additional nodes allowed us to apply the governing equations at boundary nodes and satisfy the boundary conditions. Beams with solid sections as well as multiply connected cross-sections were analyzed using this model; shear stresses and localized stresses at reentrant corners, torsion constant, and warping displacements were determined. Furthermore, beams with thin-walled closed sections, single-cell or multiple-cell, were analyzed using the Prandtl stress function whereby a linear distribution of the shear stresses over the thickness was considered; closed-form solutions for shear stresses and torsion constant were derived. The results obtained in this study showed good agreement with the exact results for rectangular cross-sections, and the accuracy was increased through a grid refinement. For thin-walled closed sections, the shear stresses obtained at the centerline using the closed-form solutions were in agreement with the values using Bredt’s analysis but the maximal values in the cross-section, which did not necessarily occur at the position with the smallest thickness, were higher; in addition, the results using the closed-form solutions were in good agreement with those using FDM.

Taking into account the growing interest in microalgae to be used as raw material for biodiesel production, this research is aimed at analyzing the rheological behaviour of microalgae suspensions (Chlorella sp) at different culture times under eight different conditions (temperature, salinity and CO₂, NO₃ and PO₄ levels) in order to estimate the energy demands of each step, with the purpose of optimizing a continuous feed tubular bioreactor construction. For each condition, it was calculated the biomass and oil yields, so as to correlate these results with rheological parameters. The suspension results indicated that the microalgae Chlorella sp is a non-Newtonian material with dilatant characteristics; the processing time hardly exerted an influence on the rheograms of the suspension of the microalgae Chlorella sp, except for the simultaneous conditions of low salinity and low CO₂ content; NO₃ and PO₄ contents and the amount of supplements influenced the rheological parameters of the suspension of the microalgae Chlorella sp, when in low concentration of CO₂ and low salinity levels.

The absolute time and relative time are defined in terms of the 4-D Euclidean space. Our universe is the 3-D x₁x₂x₃ quantized photon space which follows the absolute time simultaneity when the universe moves along the absolute time axis of ct. The length expansion of Dx = gDx₀ is derived under the condition of the absolute time (ct) simultaneity. From the similarity between this length expansion of Dx = gDx₀ and the energy increasing of E = gE₀, it is assumed that the energy is proportional to the particle size of Dx. The extension of this assumption to the 4-D Euclidean space gives the new definition that the particle energy (E) is the 4-D volume. Then, the particle mass energy is defined as E= mc² = cDtDV = gE₀. The masses of the elementary particles are originated from the 4-D warped volume of the photon space because the particle is the warped photon space with the velocity of v < c. Therefore, the Higgs boson concept in the standard model (SM) is not needed in the present 3-D quantized space model (TQSM). The scalar boson with the spin of zero, photon with the spin of 1 and graviton with the spin of 2 are the two-boson states. Therefore, the observed Higgs boson is reinterpreted as the two-boson state of the scalar boson with the spin of zero. The cosmic muon observation and twin paradox are explained by using the absolute time and relative time. The relative time is the observed time in the twin paradox and cosmic muon observation. In the twin paradox, a person who travels the long distance is more aged than a person on the earth in terms of the relative time ages because of the space and time conversion effect (STCE effect) of the moving space distance (x). But twins are in the same ages in terms of the absolute time without STCE effect. The fast-moving cosmic muon has the expanded half-life from the time expansion of the relative time. Also, the quantum entanglement and Pauli exclusion principle are explained. The quantum base of the photon space line connects two entangled particles. Two particles and quantum base system is fluctuated along the absolute time axis by the time clicking when one particle is measured. Another particle is instantly selected by the time clicking. This is called as the quantum entanglement. The photons which are the flat photon space with the constant speed of c along the space axis and absolute time axis have the 4-D photon velocity of c_eff = 2^0.5 c. Total 10-D Euclidean space including three 3-D quantized spaces and one absolute time axis is required for the electric charges (EC), lepton charges (CC) and color charges (CC) of the elementary particles. The 3-D photon space is very stiff along the absolute time (ct) axis and very soft along the space axes. The Coulomb force through the photons (2EM waves) of the space fluctuations is much stronger than the Gravitational force through the gravitons (G waves) of the time fluctuations between two electrons.

The literature on the causation of multiple sclerosis (MS), both genetic and environmental, extends over hundreds of years, with no firm conclusions on the exact role of autoimmunity and lifestyle. The epidemiology of MS was the basis for this review, but with a new, extensive examination of genes pertaining to each disorder, and disease of first, and second, degree relatives of those with MS. The author’s motivation was to discover some relationship between MS, and notable familial conditions, as the heredity of MS is concluded to be 30%, and the disorders had a chronic and/or idiopathic nature. This investigation hoped to further understand the randomness of MS- who acquires it, and what symptoms develop- after the author’s decades of observing several incidences of multiple members developing MS in a single family. Online databases for the human genome were used to link genes to MS, and symptoms, including excessive depression, fatigue and suicide rates, in coordination with linking genes for specific familial conditions including seizures, stroke, mental illness, bowel disorders, and thyroid conditions. Interesting associations were found, notably a cluster of Th2 cytokines, known to cure the animal model of MS, important receptors for neurotransmitters and hormones, a gene specific to Epstein Barr Virus, and potential genes for mitochondrial dysfunction. The results surprised the author, showing polygenic regions of chromosome 2 and 5, especially a cluster at loci 5q31-q33, may be dysregulated. The conclusion agrees with past hypotheses MS results not from a single gene, but from various genes, including those expressed in glial cells. The individual theories to the causation of MS, starting with Charcot may be explained by multiple pathways converging into a single disease outcome. In coordination with a sunlight factor, chromosome 2 appears to mediate the immune system, and inflammation, through ultraviolet radiation producing vitamin D3 in the skin, but additionally through peptides formed in the melanocyte stimulating and concentrating hormone class. The impact of stress in MS could be primary, given the loci of several stress-related and stress-modulated genes on these chromosomes, and calls for more appreciation of, and greater care for, the MS patients’ state of mind.

Due to a simple crane limited capacity; there is an urgent need to use high capacity cranes such as tower cranes. However, with regard to their high expense, we have to take into consideration selecting what type of cranes to be utilized which has been discussed by many researchers. In this research, a proposed technique was created to select the suitable type of crane and best place for crane erection, in addition to minimum radius for requested crane in order to minimize cost. To fulfill that target, a computer program is designed to numerate these problems, demonstrating an example explaining how to apply program and the result donated best place.

Multiple governmental agencies and private organisations have made commitments for the colonisation of Mars. Such colonisation requires complex systems and infrastructure that could be very costly to repair or replace in cases of cyber-attacks. This paper surveys deep learning algorithms, IoT cyber security and risk models, and established mathematical formulas to identify the best approach for developing a dynamic and self-adapting system for predictive cyber risk analytics supported with Artificial Intelligence and Machine Learning and real-time intelligence in edge computing. The paper presents a new mathematical approach for integrating concepts for cognition engine design, edge computing and Artificial Intelligence and Machine Learning to automate anomaly detection. This engine instigates a step change by applying Artificial Intelligence and Machine Learning embedded at the edge of IoT networks, to deliver safe and functional real- time intelligence for predictive cyber risk analytics. This will enhance capacities for risk analytics and assists in the creation of a comprehensive and systematic understanding of the opportunities and threats that arise when edge computing nodes are deployed, and when Artificial Intelligence and Machine Learning technologies are migrated to the periphery of the internet and into local IoT networks.

This paper proposes an innovative mechatronic piezo-actuated module to control vibrations in modern machine tools. Vibrations represent one of the main issues that compromise seriously the quality of the workpiece. The active vibration control (AVC) device is composed by a host part integrated with sensors and actuators synchronized by a regulator, able to make a self-assessment and adjust to the environmental alteration. This study presents the mechatronic model based on the kinematic and dynamic analysis of the AVC device. To ensure a real time performance, a H2-LQG controller has been developed and validated by simulations involving machine tool, PZT actuator and controller models. The Hardware-in-the-loop (HIL) architecture is adopted to control and attenuate the vibrations. A set of experimental tests has been performed to validate the AVC module on a commercial machine tool. The feasibility of the real time vibration damping is demonstrated and the simulation accuracy is evaluated.

Since crystals are made of periodic structures in space, predicting their three period vectors starting from any values based on the inside interactions is a basic theoretical physics problem. For the general situation where crystals are under constant external stress, we derived dynamical equations of the period vectors in the framework of Newtonian dynamics, for pair potentials recently (doi:/10.1139/cjp-2014-0518). The derived dynamical equations show that the period vectors are driven by the imbalance between the internal and external stresses. This presents a physical process where when the external stress changes, the crystal structure changes accordingly, since the original internal stress can not balance the external stress. The internal stress has both a full kinetic energy term and a full interaction term. It is extended to many-body interactions in this paper. As a result, all conclusions in the pair-potential case also apply for many-body potentials.

Rhododendron chrysanthum Pall., live in Changbai Mountain being exposed to chilling temperature, high light intensities and water scarcity condition. To adapt to the harsh environment, the cold resistance mechanisms of R. chrysanthum have been successfully evolved in the long-term adaptive process. In our present work, the methods of proteomics combined with physiological and biochemical analyses were used to investigate the effects of cold stress on the photosynthesis and antioxidant system of Rhododendron chrysanthum Pall. and the molecular mechanisms involved in cold resistance of plants. A total of 153 photosynthesis related proteins were identified in present work, of which 7 proteins including Rubisco large subunit (rbcL) were up-regulated in experiment group (EG) compared with control group (CG). Simultaneously, four chlorophyll fluorescence parameters were measured in present study. The results showed that the maximum photochemical efficiency of photosystem II (Fv/Fm), actual quantum yield of PSII (Y(II)) and photochemical quenching (qP) were significantly higher in EG, whereas the non-photochemical quenching (NPQ) was notably decreased. Cold stress could lead to a significant reduction in electron transport rate (ETR) accompanied with an increase in excitation pressure (1-qP). The abundance of PetE which involved in the plants photosynthetic electron transfer was also significantly influenced by cold stress. Moreover, the up-regulated expressions and higher levels of enzymatic activities of Glutathione peroxidase (GPX) and Ascorbate peroxidases (APXs) were detected in EG. All these changes which can help plants to survive in low temperature are considered as the crucial parts of cold tolerance mechanisms. These results revealed that photosynthesis and redox adjustment play significant roles in the defense of cold-induced damage.

Using DCC-GARCH and EGARCH model, this paper finds that since 1990, the relationship between crude oil prices and the US dollar index is time-varying, demonstrating a process of “very weak correlation—negative correlation—enhanced negative correlation—weakening negative correlation”, but the existing research does not provide enough reasonable explanation. Therefore, this paper proposed a “key mediating factors” hypothesis which points out that whether there is a common “key mediating factor” is important source of the time-varying relationship between two assets. We argue that market trend and financial market sentiment undertook the role of “key mediating factor” during the period of “2002 to the financial crisis” and “financial crisis to 2013”, while other periods lack the “key mediating factors”.

This study investigated the neuroprotective effects of methyl 3,4-dihydroxybenzoate (MDHB) against t-butylhydroperoxide(TBHP) induced oxidative damage in SH-SY5Y (human neuroblastoma cells) and the underlying mechanisms. SH-SY5Y were cultured in DMEM+10% FBS for 24 hours and pretreated with different concentrations of MDHB or N-acetyl-L-cysteine (NAC) for 4 hours prior to the addition of 40 μM TBHP for 24 hours. Cell viability was analyzed using the methyl thiazolyl tetrazolium (MTT) and lactate dehydrogenase (LDH) assays. An annexin V-FITC assay was used to detect cell apoptosis rate. The 2',7'-dichlorofluorescin diacetate (DCFH-DA) assay was used to determine intracellular ROS levels. The activities of antioxidative enzymes (GSH-Px and SOD) were measured using commercially available kits. The oxidative DNA damage marker 8-OHdG was detected using ELISA. Western blotting was used to determine the expression of Bcl-2, Bax, caspase 3, p-Akt and Akt proteins in treated SH-SY5Y cells. Our results showed that MDHB is an effective neuroprotective compound that can mitigate oxidative stress and inhibit apoptosis in SH-SY5Y cells

The SARS-Cov-2 virus, which causes COVID 19, uses the cell surface protein ACE2 as receptor for entry into cells. Critically ill COVID-19 patients often require prolonged mechanical ventilation which can cause mechanical stress to lung tissue. In vitro studies have shown that expression of ACE2 in alveolar cells is increased following mechanical stretch and inflammation. Therefore, we analyzed transcriptome datasets of 480 (non-COVID-19) lung tissues in the GTex tissue gene expression database. We found that mechanical ventilation of the tissue donors increased the expression of ACE2 by more than two-fold (p<10^-6). Analyses of transcriptomes of mechanically ventilated mice in the GEO database indicate that this alveolar cell response to stretch and inflammation is mediated by the chemokine midkine. Using a novel big knowledge network approach (SPOKE) we also found in transcriptomes of pharmacological perturbations (LINCS) that corticosteroids down-regulate midkine in pulmonal cells, and confirmed this in GEO transcriptomes of animal studies. Thus, mechanical ventilation of patients with COVID-19 pneumonia may eo ipso facilitate viral propagation in the lung, further accelerating the pulmonal pathology that has necessitated mechanical ventilation in the first place. This vicious cycle presents a rationale for the temporary treatment with corticosteroids to modulate the midkine-ACE2 axis in ventilated COVID19 patients and for gentler ventilation protocols.

This paper presents an approach to the vibration analysis of axially functionally graded non-prismatic Timoshenko beams (AFGNPTB) using the finite difference method (FDM). The characteristics (cross-sectional area, moment of inertia, elastic moduli, shear moduli, and mass density) of axially functionally graded beams vary along the longitudinal axis. The Timoshenko beam theory covers cases associated with small deflections based on shear deformation and rotary inertia considerations. The FDM is an approximate method for solving problems described with differential equations. It does not involve solving differential equations; equations are formulated with values at selected points of the structure. In addition, the boundary conditions and not the governing equations are applied at the beam’s ends. In this paper, differential equations were formulated with finite differences, and additional points were introduced at the beam’s ends and at positions of discontinuity (supports, hinges, springs, concentrated mass, spring-mass system, etc.). The introduction of additional points allowed us to apply the governing equations at the beam’s ends and to satisfy the boundary and continuity conditions. Moreover, grid points with variable spacing were also considered, the grid being uniform within beam segments. Vibration analysis of AFGNPTB was conducted with this model, and natural frequencies were determined. Finally, a direct time integration method (DTIM) was presented. The FDM-based DTIM enabled the analysis of forced vibration of AFGNPTB, considering the damping. The results obtained in this study showed good agreement with those of other studies, and the accuracy was always increased through a grid refinement.

Pure-compression shells have been the central topic in the form-finding of shells. This paper studies tension-compression mixed type shells by utilizing a NURBS-based isogeometric form-finding approach that analyzes Airy stress functions to expand the possible plan geometry. A complete set of smooth version graphic statics tools is provided to support the analyses. The method is validated using examples with known solutions, and a further example demonstrates the possible forms of shells that the proposed method permits. Additionally, a guideline to configure a proper set of boundary conditions is presented through the lens of asymptotic lines of the stress functions.

Aspalathin (ASP) can protect H9c2 cardiomyocytes against high glucose (HG)-induced shifts in myocardial substrate preference, oxidative stress and apoptosis. While the protective mechanism of aspalathin remains unknown, nuclear factor (erythroid-derived 2)-like 2 (Nrf2) has emerged as a key factor for intracellular responses against oxidative stress. Therefore, we hypothesized that aspalathin protects the myocardium against hyperglycemia-induced oxidative damage by up-regulating Nrf2 expression in H9c2 cardiomyocytes and diabetic (db/db) mice. Using an oxidative stress RT2 Profiler PCR array, ASP at a dose of 1 µM was demonstrated to protect H9c2 cardiomyocytes against HG-induced oxidative stress, but silencing of Nrf2 abolished this protective response of ASP and exacerbated cardiomyocyte apoptosis. Db/db mice and their non-diabetic (db/+) littermate controls were subsequently treated daily for 6 weeks with either a low (13 mg/kg) or high (130 mg/kg) ASP dose. Compared to nondiabetic mice the db/db mice presented increased cardiac remodeling and enlarged left ventricular wall that occurred concomitant to enhanced oxidative stress. Daily treatment of mice with ASP at a dose of 130 mg/kg for 6 weeks was more effective at reversing complications than both a low dose ASP or metformin, eliciting enhanced expression of Nrf2 and its downstream antioxidant genes. These results indicate that ASP maintains cellular homeostasis and protects the myocardium against hyperglycemia-induced stress through activation of Nrf2 and its downstream target genes.

This paper presents an approach to the two-dimensional analysis of elastic isotropic deep beams using the finite difference method (FDM). Deep beams are subjected to in-plane loading and present a shear span to height ratio of less than 2.50; consequently, Euler-Bernoulli beam theory and Timoshenko beam theory do not apply. Deep beams analysis is generally conducted using numerical methods such as the finite element method and to a lesser extent the FDM; the strut-and-tie model and the stress field method are also widely utilized. Analytical approaches usually make use of the Airy stress function, where stresses are formulated in terms of the stress function; however, the exact solution of this function satisfying all of the boundary conditions can hardly be found, even for simple cases. In this paper, deep beams were analyzed using the FDM. The FDM is an approximate method for solving problems described with differential equations. The FDM does not involve solving differential equations; equations are formulated with values at selected nodes of the structure. Therefore, the deep beam was discretized with a two-dimensional grid, and additional nodes were introduced at the boundaries and at positions of discontinuity (openings, brutal change of material properties, non-uniform grid spacing), the number of additional nodes corresponding to the number of boundary conditions at the node of interest. The introduction of additional nodes allowed us to apply the governing equations at boundary nodes and satisfy the boundary and continuity conditions. An Airy stress function approach and a displacement potential function approach were considered in this study whereby strong formulations of equations (equilibrium, kinematic, and constitutive) were set. Stress and stability analyses were carried out with this model; furthermore, deep beams of varying stiffness, layered beams, and beams having openings were analyzed. For slender beams, the results obtained with the Airy stress function approach showed good agreement with those of the Euler-Bernoulli beam theory, and for deep beams, the shapes of stress distributions were in good agreement with a proper understanding of the behavior of structures. On the other hand, the displacement potential function approach delivered unsatisfactory results, probably due to the use of an inefficient equation solver; a more powerful tool will be needed in future research for this purpose.

Structural health monitoring has been studied by a number of researchers as well as various industries to keep up with the increasing demand for preventive maintenance routines. This work presents a novel method for reconstruct prompt, informed strain/stress responses at the hot spots of the structures based on strain measurements at remote locations. The structural responses measured from usage monitoring system at available locations are decomposed into modal responses using empirical mode decomposition. Transformation equations based on finite element modeling are derived to extrapolate the modal responses from the measured locations to critical locations where direct sensor measurements are not available. Then, two numerical examples (a two-span beam and a 19956-degree of freedom simplified airfoil) are used to demonstrate the overall reconstruction method. Finally, the present work investigates the effectiveness and accuracy of the method through a set of experiments conducted on an aluminium alloy cantilever beam commonly used in air vehicle and spacecraft. The experiments collect the vibration strain signals of the beam via optical fiber sensors. Reconstruction results are compared with theoretical solutions and a detailed error analysis is also provided.

Furazolidone (FZD) is a synthetic nitrofuran with the antiprotozoal and antibacterial activity. The proper mechanism of FZD induced toxicity is still unclear. This study aimed to investigate the protective effect of curcumin on FZD induced oxidative stress, DNA injury and apoptosis in human hepatocyte L02 cells. The results showed that curcumin treatment significantly ameliorated FZD induced cytotoxicity, characterized by decreasing the production of reactive oxygen species (ROS) and malondialdehyde, as well as increasing superoxide dismutase, catalase activities and glutathione contents. Moreover, curcumin pretreatment significantly inhibited FZD induced the loss of mitochondrial membrane potential, the activation caspase-9 and -3 and apoptosis. Comet assay showed that curcumin attenuated FZD induced DNA injury in a dose-dependent manner. Correspondingly, curcumin markedly reversed the up-regulation of p53, Bax, caspase-9 and -3 mRNA expressions and the down-regulation of Bcl-2 mRNA (all p<0.05 or 0.01). These results reveal that curcumin protects against FZD induced oxidative stress, DNA injury and cell apoptosis via inhibiting oxidative stress and mitochondrial pathway, which may be attributed to ROS scavenging and anti-oxidative ability of curcumin. Importantly, our study highlights that curcumin may be a potential way to prevent FZD-mediated oxidative DNA injury and apoptosis in human or animals.

In this paper, we study a one-dimensional Bresse-Cattaneo system with infinite memories and time-dependent delay term (the coefficient of which is not necessarily positive) in the internal feedbacks. First, it is proved that the system is well-posed by means of the Hille-Yosida theorem under suitable assumptions on the relaxation functions. Then, without any restriction on the speeds of wave propagations, we establish the exponential or general decay result by introducing suitable energy and Lyapunov functionals.

Oxidative stress occurs when cells are exposed to elevated levels of reactive oxygen species that could damage biological molecules. One bacterial response to oxidative stress involves disulfide bond formation either between protein thiols or between protein thiols and low-molecular-weight thiols. Bacillithiol was recently identified as a major low-molecular-weight thiol in Bacillus subtilis and related Firmicutes. Four genes (bshA, bshB1, bshB2 and bshC) are involved in bacillithiol biosynthesis. The bshA and bshB1 genes are part of a seven-gene operon (ypjD), which includes the essential gene cca, encoding CCA-tRNA nucleotidyltransferase. The inclusion of cca in the operon containing bacillithiol biosynthetic genes suggests that the integrity of the 3’ terminus of tRNAs may also be important in oxidative stress. Addition of the 3´ terminal CCA sequence by CCA-tRNA nucleotidyltransferase to give a mature tRNA and functional molecules ready for aminoacylation plays an essential role during translation and expression of the genetic code. Any defects in these processes, for example, the accumulation of shorter and defective tRNAs under oxidative stress, could exert a deleterious effect on cells. This review summarizes the physiological link between tRNA^Cys regulation and oxidative stress in Bacillus.

Apart from their established role in embryonic development Nerve Growth Factors (NGFs) have diverse functions in the nervous system. Their role in integration of physiological functioning of the nervous system is now attracting attention. In the present analysis, we propose a novel paradigm about a novel role of NGFs: NGFs play imperative role in maintaining psychological integrity of an individual as a biological system. This function may be mediated through HPA-axis- operated homeostatic mechanisms; stress induced disruption of which may lead to psychiatric disorders. Current literature suggests existence of constitutive homeostatic regulatory mechanisms for NGFs disruption which may lead to pertinent and imperative behavioural effects. NGFs are known to play crucial role in endocrine regulation. This is especially true with the prototype ‘NGF’ and Brain Derived Neurotrophic Factor (BDNF). These moieties have been observed to play important function in maintaining neuro-endocrine homeostasis thereby having a profound impact on the psychological health of an individual. Role of NGFs and HPA-axis activation (in separate studies) in developing psychiatric disorders - especially those born of stress - have been reported. Literature suggests their unique interplay for producing a common effect which might be implicated in stress induced genesis of psychiatric disorders. This aspect, therefore, needs to be elucidated further as a disease etiogenesis model. This model may yield important insights into the biology of psychiatric disorders and may open ways for new therapeutic approaches.

P versus NP is considered as one of the most fundamental open problems in computer science. This consists in knowing the answer of the following question: Is P equal to NP? It was essentially mentioned in 1955 from a letter written by John Nash to the United States National Security Agency. However, a precise statement of the P versus NP problem was introduced independently by Stephen Cook and Leonid Levin. Since that date, all efforts to find a proof for this problem have failed. Another major complexity class is NP-complete. It is well-known that P is equal to NP under the assumption of the existence of a polynomial time algorithm for some NP-complete. We show that the Monotone Weighted Xor 2-satisfiability problem (MWX2SAT) is NP-complete and P at the same time. Certainly, we make a polynomial time reduction from every directed graph and positive integer k in the K-CLOSURE problem to an instance of MWX2SAT. In this way, we show that MWX2SAT is also an NP-complete problem. Moreover, we create and implement a polynomial time algorithm which decides the instances of MWX2SAT. Consequently, we prove that P = NP.

This study sought to investigate steel frames’ performance with dual lateral loader system (Frame bending + bracings of divergent and convergent) in near and far filed to fault. In order to this, four categories of steel frame with dual system with 8, 10 and 12 story are designed with average formation based on existing seismic regulation in 2800 standard of Iran and tenth chapter of national regulations of construction (planning and performing steel construction). Time history non-linear dynamic analysis under the effect of near and far field earthquakes has been done on plan’s models. Then the maximum of floors’ dislocation, floors’ drift, roof dislocation, base shear and energy curves of frames are shown and compared with each other. All non-linear time history analyses have been accomplished using PERFORM 3D software.

Enveloped viruses represent a significant category of pathogens that cause serious diseases in animals. These viruses express envelope glycoproteins that are singularly important during infection of host cells by mediating fusion between the viral envelope and host cell membranes. Despite low homology at protein levels, three classes of viral fusion proteins have, as of yet, been identified based on structural similarities. Their incorporation into viral particles is dependent upon their proper sub-cellular localization after being expressed and folded properly in the endoplasmic reticulum (ER). However, viral protein expression can cause stress in the ER, and host cells respond to alleviate the ER stress in the form of the unfolded protein response (UPR); the effects of which have been observed potentiating or inhibiting viral infection. One important arm of UPR is to elevate the capacity of the ER-associated protein degradation (ERAD) pathway, which is comprised of host quality control machinery that ensures proper protein folding. In this review, we provide relevant details regarding viral envelope glycoproteins, UPR, ERAD, and their interactions in host cells.

Performing optimisation and scale-up studies of crystallisation systems requires accurate and computationally efficient mathematical models. The assumption of the ideal mixing conditions in batch reactors typically produce inaccurate results while the computational expense of CFD models is still prohibitively high. Therefore, in this work, a new intermediary approach is proposed that takes into account the non-ideal mixing conditions in the reactor and requires less computational resources than full CFD simulations. Starting with the Danckwerts concept of the intensity of segregation, an analogy between its application to chemical reactions and the kinetics of the crystallisation phenomena (such as nucleation and growth) has been made. As a result, the modified kinetics expressions have been derived which incorporate the effect of non-idealities present in stirred reactors. This way, based on the experimental measurements of the mixing time using the Laser Induced Fluorescence (LIF) technique, computationally more efficient mathematical models can be developed in two ways: (1) the accurate semi-empirical correlations are available for standard mixing configurations with the most often used types of impellers, (2) CFD simulations can be utilised for estimation of the mixing time; in this case it is necessary to simulate only the mixing process. The benefits offered by the LIF experimental technique have been demonstrated and some frequent problems in its application analysed. The mixing time results for configurations with and without baffles for three types of impellers and four different rotational speeds have been presented. The false shorter mixing times in the non-baffled configurations have been observed and this phenomena explained by the existence of two segregated zones in the reactor and confirmed by additional experiments. The precise measurements in these cases have been shown as difficult using the LIF technique, particularly for higher rpms. The experimental data has been compared to the preliminary simulation results obtained from the Smoothed Particle Hydrodynamics method and the standard k-ε turbulence model with the modest success. The shortcomings of the SPH model have been recognized and the directions for the future work discussed.

We propose a Gauss model (GM), a map from time to the bell-shaped Gauss function to model the deaths per day and country, as a quick and simple model to make predictions on the coronavirus epidemic. Justified by the sigmoidal nature of a pandemic, i.e. initial exponential spread to eventual saturation, we apply the GM to existing data, as of April 2, 2020, from 25 countries during first corona pandemic wave and study the model's predictions. We find that logarithmic daily fatalities caused by Covid-19 are well described by a quadratic function in time. By fitting the data to second order polynomials from a statistical chi2-fit with 95\% confidence, we are able to obtain the characteristic parameters of the GM, i.e. a width, peak height and time of peak, for each country separately, with which we extrapolate to future times to make predictions. We provide evidence that this supposedly oversimplifying model might still have predictive power and use it to forecast the further course of the fatalities caused by Covid-19 per country, including peak number of deaths per day, date of peak, and duration within most deaths occur. While our main goal is to present the general idea of the simple modeling process using GMs, we also describe possible estimates for the number of required respiratory machines and the duration left until the number of infected will be significantly reduced.

Determination of time-weighted average (TWA) concentrations of volatile organic compounds (VOCs) in air using solid-phase microextraction (SPME) is advantageous over other sampling techniques, but is often characterized by insufficient accuracies, particularly at longer sampling times. Experimental investigation of this issue and disclosing the origin of the problem is problematic and often not practically feasible due to high uncertainties. This research is aimed at developing the model of TWA extraction process and optimization of TWA air sampling by SPME using finite element analysis software (COMSOL Multiphysics). It was established that sampling by porous SPME coatings with high affinity to analytes is affected by slow diffusion of analytes inside the coating, an increase of analytes concentrations in the air near the fiber tip due to equilibration, and eventual lower sampling rate. The increase of a fiber retraction depth (Z) resulted in better recoveries. Sampling of studied VOCs using 23-ga Car/PDMS assembly at maximum possible Z (40 mm) was proven to provide more accurate results. Alternative sampling configuration based on 78.5 x 0.75 mm i.d. SPME liner was proven to provide similar accuracy at improved detection limits. Its modification with the decreased internal diameter from the sampling side should provide even better recoveries. The developed model offers new insight into optimization of air and gas sampling using SPME.

The static formation temperature (SFT) is required to determine the thermophysical properties and production parameters in geothermal and oil reservoirs. However, the SFT is not easy to be obtained by both experimental and physical methods. In this paper, a mathematical approach to predicting SFT based on a new model describing the relationship between bottom hole temperature (BHT) and shut-in time was proposed. The unknown coefficients of the model were derived from least squares fit by Particle Swarm Optimization (PSO) algorithm. Besides, the ability to predict SFT based on a few BHT data (such as first 3, 4, or 5 ones of a data set) was evaluated. The accuracy of the proposed method to predict SFT was testified with a deviation percentage less than ±4% and high values of regression coefficient R² (>0.98). The proposed method could be used as a practical tool to predict SFT in both geothermal and oil wells.

Combining modern thermodynamics theory branches, including finite time thermodynamics or entropy generation minimization, constructal theory and entransy theory, with metallurgical process engineering, this paper provides a new exploration on generalized thermodynamic optimization theory for iron and steel production processes. The theoretical core is to thermodynamically optimize performances of elemental packages, working procedure modules, functional subsystems, and whole process of iron and steel production processes with real finite-resource and/or finite-size constraints with various irreversibilities toward saving energy, decreasing consumption, reducing emission and increasing yield, and to achieve the comprehensive coordination among the material flow, energy flow and environment of the hierarchical process systems. A series of application cases of the theory are reviewed. It can provide a new angle of view for the iron and steel production processes from thermodynamics, and can also provide some guidelines for other process industries.

Fluid flow in human body is generally known to influence a variety of cellular behaviors. Different nanoparticle properties as well as cell type, interaction with other cells and cellular environments also show significant effect on nanoparticle uptake and drug efficacy. The aim of this study was to evaluate the effect of shear stress on cellular behaviors of biocompatible and biodegradable nanoparticles to cancer cells (A549 cell lines) in a biomimetic microfluidic system. We prepared a gelatin-oleic conjugate (GOC) as an amphiphilic biomaterial to prepare self-assembled gelatin-oleic nanoparticles (GON). Coumarin-6 and paclitaxel were used as the fluorescence marker and model drug, respectively, and were loaded into GONs by incubation (C-GONs; PTX-GONs). Additionally, we evaluated the cellular uptake of fluorescence labeled C-GONs and the drug efficacy of PTX-GONs. The cellular uptake of C-GONs by A549 cells in the absence of shear stress revealed that the mean fluorescence intensity was slightly decreased compared to that in the presence of shear stress. The results also indicated that negatively charged PTX-GONs had a lower cancer killing effect under dynamic conditions than that under static conditions. It also suggested that fluidic shear stress did not significantly affect drug uptake and efficiency in case of PTX-GONs. The cellular interactions between nanoparticles and cells in drug delivery should be carefully examined according to the physicochemical properties of nanoparticles such as the type of materials, size and mainly surface charge in a biomimetic microfluidic condition.

This paper studies the duration patterns of unemployment spells for immigrants and the determinants of unemployment’s completion into one of a number of studied labour market states in Finland. We estimate a duration model for unemployment with competing risks of its terminating into employment, labour market training or economic inactivity. Taking into account the wide period of observation and opportunities to analyse processes of labour market integration during various periods of economic development in Finland, in combination with the individualistic character of the labour careers of immigrants, this research is beneficial owing to the many various findings concerning labour market integration of immigrants. The approach undertaken in this research has a dualistic “descriptive-dynamic” character under which integration is understood as a never-ending process, which is conditioned by a time period of long-term existence and a context of solitary action. We find that transitions out of unemployment spells have a cyclical character; after every new “cycle” in unemployment, the probability of terminating unemployment decreases further. We also find that ascriptive factors make sense in the process of job-placement of immigrants from unemployment. Therefore, the gender, education and age of immigrants, as well as the effect of the period in which first unemployment occurred, potentially predict transitions out of unemployment and further labour market integration of immigrants.

Oligonol is a low-molecular-weight polyphenol derived from lychee fruit. This study was conducted to examine whether oligonol has an ameliorative effect on diabetes-induced pancreatic damage via oxidative stress-induced inflammation. Oligonol was orally administered at 10 or 20 mg/kg body weight/day for 10 days to streptozotocin-induced diabetic rats, and changes in serum glucose, C-peptide, insulin, reactive oxygen species (ROS), and thiobarbituric acid-reactive substance (TBARS) levels as well as body weight and food and water consumption were assessed. Furthermore, rat pancreases were analyzed for weight, ROS generation, TBARS level, insulin content, and protein expressions of phosphor (p)-p38, p-extracellular-signal regulated kinase 1/2, p-inhibitor of nuclear factor kappa Bα, nuclear factor-kappa Bp65, cyclooxygenase-2, inducible nitric oxide synthase, tumor necrosis factor-α, and interleukin-6. Markers of diabetes were shown to be decreased by oligonol administration and histological damage in the pancreas was also ameliorated. These results indicate that oligonol exerts antidiabetic activities, which may be mediated via antioxidative, stress-related, anti-inflammatory signaling.

Genome-wide epigenetic changes in plants are being reported during the development and environmental stresses, which are often correlated with gene expression at the transcriptional level. Sum total of the biochemical changes in nuclear DNA, post-translational modifications in histone proteins and variations in the biogenesis of non-coding RNAs in a cell is known as epigenome. These changes are often responsible for variation in expression of the gene without any change in the underlying nucleotide sequence. The changes might also cause variation in chromatin structure resulting into the changes in function/activity of the genome. The epigenomic changes are dynamic with respect to the endogenous and/or environmental stimuli which affect phenotypic plasticity of the organism. Both, the epigenetic changes and variation in gene expression might return to the pre-stress state soon after withdrawal of the stress. However, a part of the epigenetic changes may be retained which is reported to play role in acclimatization, adaptation as well as in the evolutionary processes. Understanding epigenome-engineering for improved stress tolerance in plants has become essential for better utilization of the genetic factors. This review delineates the importance of epigenomics towards possible improvement of plant’s responses to environmental stresses for climate resilient agriculture.

Given a stream of depth images with a known cuboid reference object present in the scene, we propose a novel approach for accurate camera tracking and volumetric surface reconstruction in real-time. Our contribution in this paper is threefold: (a) utilizing a priori knowledge of the cuboid reference object, we keep drift-free camera tracking without explicit global optimization; (b) we improve the fineness of the volumetric surface representation by proposing a prediction-corrected data fusion strategy rather than simple moving average, which enables accurate reconstruction of high-frequency details such as sharp edges of objects and geometries of high curvature; (c) we introduce a benchmark dataset CU3D containing both synthetic and real-world scanning sequences with ground-truth camera trajectories and surface models for quantitative evaluation of 3D reconstruction algorithms. We test our algorithm on our dataset and demonstrate its accuracy compared with other state-of-the-art algorithms. We release both our dataset and code as opensource1 for other researchers to reproduce and verify our results.

This paper presents an approach to the vibration analysis of axially functionally graded (AFG) non-prismatic Euler-Bernoulli beams using the finite difference method (FDM). The characteristics (cross-sectional area, moment of inertia, elastic moduli, and mass density) of AFG beams vary along the longitudinal axis. The FDM is an approximate method for solving problems described with differential equations. It does not involve solving differential equations; equations are formulated with values at selected points of the structure. In addition, the boundary conditions and not the governing equations are applied at the beam’s ends. In this paper, differential equations were formulated with finite differences, and additional points were introduced at the beam’s ends and at positions of discontinuity (supports, hinges, springs, concentrated mass, spring-mass system, etc.). The introduction of additional points allowed us to apply the governing equations at the beam’s ends and to satisfy the boundary and continuity conditions. Moreover, grid points with variable spacing were also considered, the grid being uniform within beam segments. Vibration analysis of AFG non-prismatic Euler-Bernoulli beams was conducted with this model, and natural frequencies were determined. Finally, a direct time integration method (DTIM) was presented. The FDM-based DTIM enabled the analysis of forced vibration of AFG non-prismatic Euler-Bernoulli beams, considering the damping. The results obtained in this paper showed good agreement with those of other studies, and the accuracy was always increased through a grid refinement.

The three dimensional conformable time fractional Kadomtsev-Petviashvili and the conformable time fractional modified Kawahara equations are solved by implementing the Kudryashov's procedure. The corresponding wave transformation reduces both equations to some ODEs. Balancing the nonlinear and the highest order derivative terms gives the structure of the solutions in the finite series form. The useful symbolic tools are used to solve the resultant algebraic systems. The solutions are expressed in explicit forms.

With the global climate anomalies and the destruction of ecological balance, water shortage has become a serious ecological problem facing all mankind, and drought has become a key factor restricting the development of agricultural production. Therefore, it is essential to study the drought tolerance of crops. On the basis of previous studies, we reviewed the effects of drought stress on plant morphology and physiology, including the changes of external morphology and internal structure of root, stem and leaf, the effects of drought stress on osmotic regulation sub-stances, drought-induced proteins and active oxygen metabolism of plants. In this paper, the main drought stress signals and signal transduction pathways in plants are described, and the functional genes and regulatory genes related to drought stress are listed respectively. We summarize the above aspects in order to provide valuable background knowledge and theoret-ical basis for future agriculture and forestry breeding and cultivation.

This work investigated the isothermal holding time dependence of the densification, microstructure, weight loss and tensile properties of Fe-Mn-Si powder compacts. Elemental Fe, Mn and Si powder mixtures with a nominal composition of Fe-28Mn-3Si (in weight percent) were ball milled for 5h and subsequently pressed under a uniaxial pressure of 400 MPa. The compacted Fe-Mn-Si powder mixtures were sintered at 1200 ℃ for 0, 1, 2 and 3 h, respectively. In general, the density, weight loss and tensile properties increased with the increase of isothermal holding time. A significant increase in density, weight loss and tensile properties occurred in the compacts isothermally holding for 1 h, as compared to those with no isothermal holding. However, further extension of isothermal holding time (2 and 3 h) only played a limited role in promoting the density and tensile properties. The weight loss of the sintered compacts was mianly caused by the sublimation of Mn in Mn depletion region on the surface layer of the sintered Fe-Mn-Si compacts. The length of the Mn depletion region increased as isothermal holding time increased. A single α-Fe phase was detected on the surface of all the sintered compacts, and the locations beyond the Mn depletion region were comprised of a dual dominant γ-austenite and minor ε-martensite.

This paper focuses on the problem of finite-time stabilization of homogeneous, non-Lipschitz systems with dilations. A key contribution of this paper is the design of a virtual recursive Hölder, non-Lipschitz state feedback which renders the non-Lipschitz systems in the special case dominated by a lower-triangular nonlinear system, finite-time stable. The proof is based on a recursive design algorithm developed recently, to construct the virtual Hölder continuous, finite-time stabilizer as well as a C¹ positive definite and proper Lyapunov function that guarantees finite-time stability of the non-Lipschitz non-linear systems.

Early detection of stress can prevent us from suffering from a long-term illness such as depression and anxiety. This article presents a scoping review of stress detection based on electrodermal activity (EDA) and machine learning (ML). From an initial set of 395 articles searched in six scientific databases, 58 were finally selected according to various criteria established. The scoping review has made it possible to analyse all the steps to which the EDA signals are subjected: acquisition, preprocessing, processing and feature extraction. Finally, all the ML techniques applied to the features of this signal have been studied for stress detection. It has been found that support vector machines and artificial neural networks stand out within the supervised learning methods given their high performance values. On the contrary, it has been evidenced that unsupervised learning is not very common in the detection of stress through EDA. This scoping review concludes that the use of EDA for the detection of arousal variation (and stress detection) is widely spread, with very good results in its prediction with the ML methods found during this review.

The difficult current environmental situation, caused by construction industry residues containing ceramic materials could be improved by using these materials as recycled aggregates in mortars, with their processing causing a reduction in their use in landfill, contributing to recycling and also minimizing the consumption of virgin materials. Although some research is currently being carried out into recycled mortars, little is known about their stress-strain (σ-ε); therefore this work will provide the experimental results obtained from recycled mortars with recycled ceramic aggregates (with contents of 0, 10, 20, 30, 50 and 100%), such as: the density, the compression strength, as well as the σ-ε curves representative of their behavior. The values obtained from the analysis process of the results are those of: σ (elastic ranges and failure maximum), ε (elastic ranges and failure maximum), and Resilience and Toughness; in order to finally obtain, through numerical analysis, the equations to predict their behavior (related to their recycled content). At the end of the investigation it is established that mortars with recycled ceramic aggregate contents of up to 20% could be assimilated just like mortars with the usual aggregates, and the prediction equations produced could be used in cases of similar applications.

The exact solutions in the wave form are derived for the time fractional KdV and the time fractional Burgers' equations in conformable fractional derivative sense. The fractional variable change using the fundamental properties of the conformable derivative reduces both equations to some nonlinear ODEs. The predicted solution is assumed to be a finite series form of a function satisfying a particular first-order ODE whose solution contains an exponential function in the denominator. The solutions are represented in the explicit forms and illustrated by some choices of the parameters for various fractional orders of the equations.

The futures market plays a significant role in hedging and speculating by investors. Although various models and instruments are developed for real-time trading, it is difficult to realize profit by processing and trading a vast amount of real-time data. This study proposes a real-time index futures trading strategy that uses the pattern of KOSPI 200 index futures time series data. We construct a pattern matching trading system (PMTS) based on a dynamic time warping algorithm that recognizes patterns of market data movement in the morning and determines the afternoon's clearing strategy. We adopt 13 and 27 representative patterns and conduct simulations with various ranges of parameters to find optimal ones. Our experimental results show that the PMTS provides stable and effective trading strategies with relatively low trading frequencies. Investor communities that have sustained financial markets are able to make more efficient investments by using the PMTS. In this sense, the system developed in this paper is a sustainable investment technique and helps financial markets achieve efficient sustainability.

Air pollution has created a lot of problems in the developed and developing countries. To avoid or reduce these problems, constant monitoring of the air should be ensured. The conventional techniques is costly because it requires a lot of money and time consuming. Biomonitoring has been the alternative method. Moss, lichens and plants are biomonitors available to entrap air pollutants. The aim of this paper is to discuss one of the ways of monitoring air pollution – Moss bag technique. To do this, types, choice, preparation, handling of bags after preparation of moss were discussed. From the literatures consulted, it was discovered that there were differences in the techniques used by the researchers. In all, the use of mosses with emphasis on the employment of moss bag have proved to be a powerful tool in airborne particulate and toxic elements. To conclude, developing countries should focus more on this technique because it will reduce cost of air monitoring.

Background: The primary objective worldwide during the COVID-19 pandemic has been controlling disease transmission. However, lockdown measures used to mitigate transmission have affected human behavior and altered lifestyles, with a likely impact on chronic non-communicable diseases. More than a year into the pandemic, substantial peer-reviewed literature has emerged on altered lifestyles following the varying lockdown measures imposed globally to control the virus spread. Objective: To explore the impact of lockdown measures on the six lifestyle factors, namely diet, physical activity, sleep, stress, social connectedness, and the use of tobacco, alcohol, or other harmful substances.Methods: We comprehensively searched PubMed and the World Health Organization’s global literature database on COVID-19 and retrieved 649 relevant articles for the narrative review. A critical interpretative synthesis of the articles was performed.Results: Most of the articles included in the review identified the negative effect of lockdown measures on each of the lifestyle factors in many parts of the world. Interestingly, encouraging lifestyle trends were also highlighted in a few articles. Such trends can positively influence the outcome of lifestyle-related chronic diseases, such as obesity and diabetes.Conclusions: The COVID-19 pandemic provides an opportunity to better understand the negative impact of strict lockdown measures on lifestyles. At the same time, it helps us identify and initiate positive behavioral changes, which, if consolidated, could improve chronic disease outcomes. It is up to governments, communities, and healthcare/academic entities to derive benefit from lessons learned from the pandemic, with the ultimate objective of better educating and promoting healthy lifestyles among communities.

Teaching is considered a multifarious task. Teachers, in the pursuit of educational success, are burdened with numerous teaching workloads and dilemmas causing them stress. This study endeavored to determine the influence of stress on professional satisfaction of multigrade teachers. It employed correlation research design involving thirty (30) purposively selected multigrade teachers in the Schools Division of General Santos City (GSC), Southern Philippines. Employing the survey method, tailored questionnaires were utilized to gather the needed data. The statistical tools employed in the analysis were weighted mean and Pearson Product Moment Correlation Coefficient. Moderate level of stress and high level of professional satisfaction are gained among the multigrade teachers surveyed. It was further found out that there is no significant relationship between stress and professional satisfaction, providing evidence that stress may not necessarily influence satisfaction. This result offers unique implications in theory, practice, and research which are discussed in the study.

Recently the number of studies investigating triterpenoid saponins has drastically increased due to their diverse and potentially attractive biological activities. Currently the literature contains chemical structures of few hundreds of triterpenoid saponins of plant and animal origin. Triterpenoid saponins consist of a triterpene aglycone with one or more sugar moieties attached to it. However, due to similar physico-chemical properties, isolation and identification of a large diversity of triterpenoid saponins remain challenging. This study demonstrates a methodology to screen saponins using hyphenated analytical platforms, GC-MS, LC-MS/MS, and LC-SPE-NMR/MS, in the example of two different phenotypes of the model plant Barbarea vulgaris (winter cress), glabrous (G) and pubescent (P) type that are known to differ by their insect resistance. The proposed methodology allows for detailed comparison of saponin profiles from intact plant extracts as well as saponin aglycone profiles from hydrolysed samples. Continuously measured 1D proton NMR data during LC separation along with mass spectrometry data revealed significant differences, including contents of saponins, types of aglycones and numbers of sugar moieties attached to the aglycone. A total of 49 peaks were tentatively identified as saponins from both plants; they are derived from eight types of aglycones and with 2–5 sugar moieties. Identification of two previously known insect-deterrent saponins, hederagenin cellobioside and oleanolic acid cellobioside, demonstrated the applicability of the methodology for relatively rapid screening of bioactive compounds.

Wireless Powered Communication Networks (WPCN), which has attracted much attention of researchers, also been recently recommended in 5^th generation (5G) wireless networks. With the help of the WPCN, the reliability and battery life of wireless low-power devices can be improved. In this paper, we investigate throughput and ergodic capacity in WPCN-assisted amplify-and-forward (AF) relaying system, considering two transmission modes including delay-tolerant and delay-limited. As important achievement, we propose symmetric energy harvesting protocol, namely time power switching relaying (TPSR) in order to find maximal throughput. In particular, both time switching and power switching coefficients in this schemes are considered. Unlike most of the previous works, we further focus on impact of outdated channel state information (CSI) in this WPCN. In order to evaluate information processing efficiency, the performance can be substantially improved by optimally harvesting time and power coefficients of the received signal at relay node for energy and information extraction, and by deploying several scenarios. By deploying Monte Carlo simulation, it is confirmed that the system performance is more sensitive to CSI estimation error, noise variance, signal-to-noise ratio (SNR) and resulting in other reasonable computations of TPSR need be deployed to obtain QoS requirement.

We propose a new theory beyond the standard model of elementary-particle physics. Employing the concept of a quantized spacetime, our theory demonstrates that the zero-point energy of the vacuum alone is sufficient to create all the fields, including gravity, the static electromagnetic field, and the weak and strong interactions. No serious undetermined parameters are assumed. Furthermore, the relations between the forces at the quantum-mechanics level is made clear. Using these relations, we quantize Einstein’s gravitational equation and explain the Dark Energy in our universe. Beginning with the zero-point energy of the vacuum, and after quantizing Newtonian gravity, we combine the energies of a static electromagnetic field and gravity in a quantum spacetime. Applying these results to the Einstein gravity equation, we substitute the energy density derived from the zero-point energy in addition to redefining differentials in a quantized spacetime. We thus derive the quantized Einstein gravitational equation without assuming the existence of macroscopic masses. This also explains the existence of the Dark Energy in the universe. For the weak interaction, by considering plane-wave electron and the zero-point energy, we obtain a wavefunction that represents a β collapse. In this process, from a different point of view than Weinberg-Salam theory, we derive the masses of the W and Z bosons and the neutrino, and we calculate the radius of the neutron. For the strong interaction, we previously reported an analytical theory for calculating the mass of a proton by considering a specific linear attractive potential obtained from the zero-point energy, which agrees well with the measurements. In the present study, we calculate the strong interaction between two nucleons, i.e., the mass of the pi-meson. The resulting calculated quantities agree with the measurements, which verifies our proposed theory.

The rapid increase in metabolic diseases occurred in the last three decades in both industrialized and developing countries has been related to the rise in sugar-added foods and sweetened beverages consumption. An emerging topic in the pathogenesis of metabolic diseases related to modern nutrition is the role of Advanced Glycation Endproducts (AGEs). AGEs can be ingested with high temperature processed foods, but also endogenously formed as consequence of a high dietary sugars intake. Animal models of high sugars consumption, in particular fructose, have reported AGEs accumulation in different tissues in association with peripheral insulin resistance and lipid metabolism alterations. The in vitro observation that fructose is one of the most rapid and effective glycating agent when compared to other sugars has prompted the investigation of the in vivo fructose-induced glycation. In particular, the widespread employment of fructose as sweetener has been ascribed by many experimental and observational studies for the enhancement of lipogenesis and intracellular lipid deposition. Indeed, diet-derived AGEs have been demonstrated to interfere with many cell functions such as lipid synthesis, inflammation, antioxidant defences, and mitochondrial metabolism. Moreover, emerging evidences also in humans suggest that this impact of dietary AGEs on different signalling pathways can contribute to the onset of organ damage in liver, skeletal and cardiac muscle, and brain, affecting not only metabolic control, but global health. Indeed, the here reviewed most recent reports on the effects of high sugars consumption and diet-derived AGEs on human health suggest the need to limit the dietary sources of AGEs, including added sugars, to prevent the development of metabolic diseases and related comorbidities.

The intracellular calcium dynamics in vascular endothelial cells (VECs) in response to wall shear stress (WSS) and/or adenosine triphosphate (ATP) have been commonly regarded as an important factor in regulating VEC function and behavior including proliferation, migration and apoptosis. However, the effects of time-varying ATP signals have been usually neglected in the past investigations in the field of VEC mechanobiology. In order to investigate the combined effects of WSS and dynamic ATP signals on the intracellular calcium dynamic in VECs, a Y-shaped microfluidic device, which can provide the cultured cells on the bottom of its mixing micro-channel with stimuli of WSS signal alone and different combinations of WSS and ATP signals in one single micro-channel, is proposed. Both numerical simulation and experimental studies verify the feasibility of its application. Cellular experimental results also suggest that a combination of WSS and ATP signals rather than a WSS signal alone might play a more significant role in VEC Ca²⁺ signal transduction induced by blood flow.

Among the plant nutrients potassium (K) is one of the vital elements required for plant growth and physiology. Potassium is not only a constituent of plant structure but also plays regulatory function in several biochemical processes related to protein synthesis, carbohydrate metabolism, enzyme activation. There are several physiological processes like stomatal regulation and photosynthesis are dependent on K. In the recent decades K was found to provide abiotic stress tolerance. Under salt stress, K helps in maintaining ion homeostasis and regulation of osmotic balance. Under drought stress condition K regulates the stomatal opening and makes the plants adaptive to water deficit. Many reports provided the notion that K enhances the antioxidant defense in plants and therefore, protects the plants from oxidative stress under various environmental adversities. Also, it provides some cellular signaling alone or in association with other signaling molecules and phytohormones. Although a considerable progress in understanding K-induced abiotic stress tolerance in plants has been achieved the exact molecular mechanisms of such protections are still under research. In this review, we summarized the recent literature on the biological functions of K, its uptake, and translocation and its role in plant abiotic stress tolerance.

Physical Unclonable Functions (PUFs) based on the retention times of the cells of a Dynamic Random Access Memory (DRAM) can be utilised for the implementation of cost-efficient and lightweight cryptographic protocols. However, as recent work has demonstrated, the times needed in order to generate their responses may prohibit their widespread usage. In order to address this issue, the Row Hammer PUF has been proposed by Schaller et al. [1], which leverages the row hammer effect in DRAM modules to reduce the retention times of their cells and, therefore, significantly speed up the generation times for the responses of PUFs based on these retention times. In this work, we extend the work of Schaller et al. by presenting a run-time accessible implementation of this PUF and further reducing the time required for the generation of its responses. Additionally, we also provide a more thorough investigation of the effects of temperature variations on the the Row Hammer PUF and briefly discuss potential statistical relationships between the cells used to implement it. As our results prove, the Row Hammer PUF could potentially provide an adequate level of security for Commercial Off-The-Shelf (COTS) devices, if its dependency on temperature is mitigated, and, may therefore, be commercially adopted in the near future.

Anomaly detection plays a significant role in helping gas turbines run reliably and economically. Considering collective anomalous data and both sensitivity and robustness of the anomaly detection model, a sequential symbolic anomaly detection method is proposed and applied to the gas turbine fuel system. A structural Finite State Machine is to evaluate posterior probabilities of observing symbolic sequences and most probable state sequences they may locate. Hence an estimating based model and a decoding based model are used to identify anomalies in two different ways. Experimental results indicates that these two models have both ideal performance overall, and estimating based model has a strong ability in robustness, while decoding based model has a strong ability in accuracy, particularly in a certain range of length of sequence. Therefore, the proposed method can well facilitate existing symbolic dynamic analysis based anomaly detection methods especially in gas turbine domain.

The scratch test consists in pushing a tool across the surface of a material at a given penetration depth or applied load. It has several applications in Science and Engineering including strength testing, damage and quality control of thin films and coatings. Despite numerous attempts in scientific literature, the application of scratch test to characterizations of fracture properties remains a heavily controversial topic. Therefore, this investigation arises as an experimental study in order to assess the fracture toughness using scratch test. A study on the effect of cryogenic treatment, performed after tempering, on fracture toughness, via scratch test experiments, of different tool steels has been made. A laboratory investigation on AISI D2, AISI M2 and X105CrCoMo18 steel confirms the possibility of increasing the fracture toughness by carrying out the cryogenic treatment after the usual heat treatment

This article shortly introduces Gaussian processes as a new approach for modelling time series in the field of blazar physics. In the second part of the paper, recent results from an application of GP modelling to the multi-wavelength light curves of the blazar PKS 1502+106 are discussed.

Thrombin (factor IIa) and factor Xa (FXa) are key enzymes at the junction of the intrinsic and extrinsic coagulation pathways and are the most attractive pharmacological targets for the development of novel anticoagulants. Twenty non-amidino N²-thiophencarbonyl- and N²-tosyl anthranilamides 1-20 and six amidino N²-thiophencarbonyl- and N²-tosylanthranilamides 21-26 were synthesized and evaluated prothrombin time (PT) and activated partial thromboplastin time (aPTT) using human plasma at concentration 30 μg/mL in vitro. From these results, compounds 5, 9, and 21-23 were selected to study the further antithrombotic activity. The anticoagulant properties of 5, 9, and 21-23 significantly exhibited a concentration-dependent prolongation of in vitro PT and aPTT, in vivo bleeding time, and ex vivo clotting time. These compounds concentration-dependently inhibited the activities of thrombin and FXa and inhibited the generation of thrombin and FXa in human endothelial cells. In addition, data showed that 5, 9, and 21-23 significantly inhibited thrombin catalyzed fibrin polymerization and mouse platelet aggregation and inhibited platelet aggregation induced U46619 in vitro and ex vivo. N-(3'-Amidinophenyl)-2-((thiophen-2''-yl)carbonyl amino)benzamide (21) was most active.

The present study aimed to analyze novel mechanisms underlying Nrf2-mediated anti-apoptosis in periodontal ligament stem cells (PDLSCs) in the periodontitis oxidative microenvironment. We created an oxidative stress model with H2O2-treated PDLSCs. Herein, we used real-time PCR, western blotting, TUNEL staining, fluorogenic assay and transfer genetics to confirm the degree of oxidative stress and apoptosis as well as the Nrf2 function. Surprisingly, we demonstrated that with up-regulated ROS and MDA levels, the effect of oxidative stress was obvious under H2O2 treatment. Anti-oxidative molecules were changed after the H2O2 exposure, whereby the anti-oxidative signaling of Nrf2 was activated with the increase of its downstream effectors, HO-1, NQO1 and γ-GCS. Additionally, the apoptosis levels gradually increased with oxidative stress and changes in the caspase-9, caspase-3, Bax and c-Fos levels, but not with caspase-8 and down-regulated Bcl-2. The enhanced antioxidant effect could not resist the occurrence of apoptosis. Furthermore, Nrf2 overexpression effectively improved the anti-oxidative levels and increased cell proliferation. At the same time, overexpression effectively restrained TUNEL staining and decreased the molecular levels of caspase-9, caspase-3, et al, but not that of caspase-8. By contrast, silencing the expression Nrf2 levels had the opposite effect. Collectively, Nrf2 alleviates PDLSCs via its effects on anti-oxidative and anti-intrinsic apoptosis by the activation of anti-oxidative enzymes.

Background: Globally, hot cooked refined rice is consumed in large quantities and is a major contributor to dietary glycaemic load. This study aimed to compare the glycaemic potency of hot and cold stored parboiled rice to widely available medium grain white rice. Method: Twenty-eight healthy volunteers participated in a three treatment experiment where postprandial blood glucose was measured over 120 minutes after consumption of 140g of rice. Three rice samples were freshly cooked medium-grain white rice, freshly cooked parboiled rice, and parboiled rice stored overnight at 4 ºC. All rice was served warm at 65 ºC. Chewing time was recorded. Results: The 24-hours cold-stored and reheated parboiled rice resulted in a 42% and 12% lower blood glucose concentration trajectory than freshly cooked medium-grain white rice and freshly cooked parboiled rice. Chewing time for 10g cold stored parboiled rice was 6 seconds (25%) longer and was considered more palatable, visually appealing and better tasting than freshly cooked medium grain (all P<0.05). Conclusions:. For regular consumers of rice reheating cooked rice after cold storage would lower the dietary glycaemic load and long term may reduce risk for type 2 and gestational diabetes. More trials are needed to identify the significance.

The aim of this study was to examine the oxidation of human serum albumin (HSA) caused by oxidative stress after an exhaustive exercise such as ultra-marathon race. Thus, blood samples from 12 adult runners who underwent a 103 km mountain ultra-marathon race were collected pre- and 24, 48 and 72 h post race. HSA was partially purified using affinity chromatography and then was subjected to Western blot analysis for disulfide dimers determination, indicating oxidation. The results were correlated with those from a previous study in which the same samples were analyzed using different oxidative stress markers and a good correlation with protein carbonyls (PC) at all time points was observed. Moreover there was a significant correlation with static oxidation-reduction potential (sORP) at 24 h, and a negative correlation with capacity oxidation-reduction potential (cORP) at 24 and 48 h. In addition, an individual analysis of albumin dimers exhibited great inter-individual differences. This inter-individual variability in the oxidation of HSA may suggest different interventions (e.g. through diet) in order to confront the effects on athletes’ organism after a strenuous exercise. In conclusion, this study supported the importance of the assessment of albumin dimers as a predictive marker for exercise-induced oxidative stress.

Real-time strategy (RTS) game has proposed many challenges for AI research for its large state spaces, enormous branch factors, limited decision time and dynamic adversarial environment. To tackle above problems, the method called Adversarial Hierarchical Task Network planning (AHTN) has been proposed and achieves favorable performance. However, the HTN description it used cannot express complex relationships among tasks and impacts of environment on tasks. Moreover, the AHTN cannot handle task failures during plan execution. In this paper, we propose a modified AHTN planning algorithm named AHTNR. The algorithm introduces three elements essential task, phase and exit condition to extend the HTN description. To deal with possible task failures, the AHTNR first uses the extended HTN description to identify failed tasks. And then a novel task repair strategy is proposed based on historical information to maintain the validity of previous plan. Finally, empirical results are presented for the μRTS game, comparing AHTNR to the state-of-the-art search algorithms for RTS games.

Rice (Oryza sativa L.) is a primary energy food for Asian population. One of the most constraints in rice production is soil salinity because of the rice is very susceptible to salt. Meanwhile, many agricultural land in Asia are in the saline area. It is important to identify and develop salt-tolerant rice varieties that can adapt in Asian climate. By combining morphological, physiological, and biochemical assessments for screening the salt tolerant of 116 Asian rice cultivars was able to classify into tolerant, moderate, and sensitive rice cultivars under salinity stress condition, and also for understanding the salt tolerance mechanisms. The rice cultivars which belong to salt-tolerant including Pokkali from India, TCCP 266 from Philippines, IR 45427 also from Philippines, and Namyang 7 from Korea. Whereas, salt-sensitive rice varieties like IR29 from Philippines, IR58 also from Philippines, Daegudo from Korea, and Guweoldo also from Korea. The salt-tolerant varieties showed signs of tolerance, including lower percent reduction of percentage germination, root length, root fresh weight, shoot length, plant biomass, and chlorophyll content. In order to maintain the cellular osmotic balance under saline condition, the salt-tolerant ones exhibited less membrane damage, lower Na/K ratio, high proline and sugar accumulation, lower malondialdehyde (MDA) and hydrogen peroxide (H2O2). Pokkali from India, TCCP 266 from Philippines, IR 45427 also from Philippines, and Namyang 7 from Korea are recommended as valuable germplasm resource for Asian rice breeding program in saline agricultural area.

Stress urinary incontinence (SUI) influences the quality of life of women. The research applied ICIQ LUTS qol (The International Consultation Incontinence Questionnaire Lower Urinary Tract Symptoms quality of life) as a tool to measure the quality of life (QOL) of patients with stage 1 SUI in many areas. 140 perimenopausal women who participated in a urodynamic test at Department of Gynecology, Endocrinology and Gynecologic Oncology, Pomeranian Medical University, Police, Poland in the years 2013-2015 were enrolled in the study. Patients were divided into two groups: A and B. Two questionnaires were applied: the author’s original questionnaire and the standardized ICIQ LUTS qol. Gymnastic plans were recommended 4 times per week for the period of 3 months. The plan for group A included the exercises of pelvic floor muscles (PFM) with the simultaneous tension of the transverse abdominal muscle (TrA) and for group B included the exercises of PMF without TrA. The evaluation of the quality of life of patients with stage 1 SUI with the use of ICIQ LUTS qol among patients from groups A and B after therapy showed a significant improvement in most areas. More impact is observed in the physiotherapy of both PFM with TrA.

Acquisition of real-time hydraulic data is an essential component for flood forecasting. However, we frequently face difficulties in obtaining discharge data using classical contact methods during high magnitude floods and for systems experiencing rapid hydro-geomorphological adjustment. Therefore, we developed low-cost, non-contact sensors and platforms that are designed to overcome these difficulties. These advances enable flood flow properties to be monitored at multiple locations across a river catchment, at low-cost, and communicated in near real-time by using an image velocimetry method. This is an optics-based approach for stream flow measurement using commercially available near-infrared digital cameras to acquire video footage in full HD (30fps). Video footage is then subjected to optical flow tracking techniques based on cross-correlation, and feature-based tracking, enabling the displacement rates of detected features (for example natural foam, seeds, woody debris, and turbulent structures) to be computed. This manual provides step by step guidance to install an image-based gauging station. It contains the list of necessary components, the calibration process of a new camera and the assembly procedure of the system.

The exact solutions of some conformable time fractional PDEs are presented explicitly. The modified Kudryashov method is applied to construct the solutions to the conformable time fractional Regularized Long Wave-Burgers (RLW-Burgers, potential Korteweg-de Vries (KdV) and clannish random walker's parabolic (CRWP) equations. Initially, the predicted solution in the finite series of a rational form of an exponential function is substituted to the ODE generated from the conformable time fractional PDE by using wave transformation. The coefficients used in the finite series are determined by solving the algebraic system derived from the coefficients of the powers of the predicted solution.

Eyes are quintessential complex traits and our understanding of their evolution guides models of trait evolution in general. A long-standing account of eye evolution argues natural selection favors morphological variations that allow increased functionality for sensing light (Darwin 1859; v. Salvini-Plawen and Mayr 1977; Nilsson and Pelger 1994; Nilsson 2013). While certainly true in part, this focus on visual performance does not entirely explain why diffuse photosensitivity persists even after eyes evolve, or why eyes evolved many times, each time using similar building blocks. Here we briefly review a vast literature indicating most genetic components of eyes historically responded to stress caused directly by light, including UV damage of DNA, oxidative stress, and production of aldehydes. We propose light-induced stress had a direct and prominent role in the evolution of eyes by bringing together genes to repair and prevent damage from light-stress, both before and during the evolution of eyes themselves. Stress-repair and stress-prevention genes were perhaps originally deployed as plastic responses to light and/or as beneficial mutations genetically driving expression where light was prominent. These stress-response genes sense, shield, and refract light but only as reactions to ongoing light stress. Once under regulatory-genetic control, they could be expressed before light stress appeared, evolve as a module, and be influenced by natural selection to increase functionality for sensing light, ultimately leading to complex eyes and behaviors. Recognizing the potentially prominent role of stress in eye evolution invites discussions of plasticity and assimilation and provides a hypothesis for why similar genes are repeatedly used in convergent eyes. Broadening the drivers of eye evolution encourages consideration of multi-faceted mechanisms of plasticity/assimilation and mutation/selection for complex novelties and innovations in general.

The aim of this research work was to provide model for predicting stock volatility in Nigeria Stock market. To achieve this, monthly data for Nigerian stock exchange, Exchange rate, Share index and inflation rate was collected for a period of January 1990 to December 2016.The descriptive statistics revealed these variables to exhibit volatility as a characteristics of financial time –varying series. DCC Model was fitted, were the coefficients for all the parameters and that of the correlation-Targeting (rho_21) are both negative and positive and tend very close to 1 and -1, indicating that high persistence in the conditional variances. The Model DCC, satisfied the properties of a good model of conditional mean and variance of the confidential Interval (C.I) of 1 and -1, that is, the conditional variances are finites and their series are strictly stationary. This therefore implies that the Nigerian Stock Exchange, Exchange rate, share index and Inflation rate will experience a non-steady shock in the Stock market. However Each of these variables have different length of recovery (volatility half- life) ranging from 1.5month, 6.5months, 6months to 2,4months for stock exchange, exchange rate, share index and inflation rate respectively. By implication, the volatility of these variables had a long memory, persistence and mean-reverting.

While the container crane is an important part of daily port operations, it has received little attention compared with other infrastructures, such as buildings and bridges. Crane collapse due to earthquake affects the operation of the port, and indirectly impacts the economy. This study proposes fragility analyses for various damage levels of the container crane that allow the port owner and partners to better understand the seismic vulnerability presented by container cranes. A large quantity of nonlinear time history analyses was applied for a three-dimensional (3D) finite element model to quantify the vulnerability of the container crane in considering the uplift and derailment behavior. The uncertainty of demand and capacity of the crane structures were also considered through random variables, i.e. elastic modulus of members, ground motion profile, and intensity. The results analyzed in the case of a Korean container crane showed that the probability of exceeding the first uplift with or without derailment is shown before the crane reaches the structure’s limit states. This means that under low seismic excitation, the crane might be derailed without any structural damage. But when the crane reaches the minor damage state, it is always coupled with a certain probability of uplift with or without derailment. This study also proposes the fragility curves developed for different structural periods to enable port stakeholders to assess the risk of their container crane.

The anisotropy in the CMBR detected by the COBE satellite has sprouted the research and theories of the void that got created, after being washed away by a parallel universe after its collision. This details of the roadmap to the parallel universe, that are previously been entangled, but now, separated, with the concept of 2-time dimensions as a time curve of containing the closed curves embedded on the surface area, thereby time running backward in orientation in the parallel universe, along with the perspective of eternal inflation and divided subspaces giving birth to twin universes are provided here. This time curve being responsible for creating an exponentiality of time frames, growing in layers, giving us the perception of the confabulations being an indication of the previously connected worlds.