The objective of this paper is to research the impact of electrical and physical parameters that characterize the complementary MOSFET transistors (NMOS and PMOS transistors) in the CMOS inverter for static mode of operation. In addition to this, the paper also aims at exploring the directives that are to be followed during the design phase of the CMOS inverters that enable designers to design the CMOS inverters with the best possible performance, depending on operation conditions. The CMOS inverter designed with the best possible features also enables the designing of the CMOS logic circuits with the best possible performance, according to the operation conditions and designers’ requirements.

To define and evaluate the areas of consideration concerning in identifying the critical factors that top universities in Nueva Ecija, Philippines can be used for triangulating the courses of actions that can be applied to improve the current practices of universities towards its combat to the COVID–19 disease is the primary objective of this study. The researchers used a descriptive design of methodology by using questionnaire–checklist to scientifically describe the situation, problems, phenomenon, or program, or provide information about certain issues related to the virus outbreak. The respondents of the study were faculty and staff of five established universities in Nueva Ecija, Philippines wherein the researchers employed a non–probability sampling technique to be logically assumed as the representative of the entire population. The results of the study shown that the top universities in Nueva Ecija have made efforts to ensure the safety of university workers by complying with the Inter–Agency Task Force (IATF) protocols. It can be inferred, in reality, that there are some areas that must be improved especially when it comes to ensuring the welfare of the personnel who are still reporting to work even in this time of the pandemic. The researchers suggested an enhancement plan that can be adapted by these universities to resolve the concerns of the faculty and staff especially in reducing the spread of the virus without sacrificing the day–to–day transactions of the academic institutions.

We are witnessing a progressive divestment of some institutions with strong traditions and skills in physical modelling and their consequent impoverishment, to the detriment of numerical modelling. For many reasons, the economic imperatives and the exponential growth of computational means and numerical methods should certainly not be excluded. In this work, we aimed to highlight the new requirements of the recent sophisticated developments in physical modelling, precisely due to the new needs imposed on them by mathematical and numerical modelling and the growing risks in civil construction works. In this context, reflections are reported, justified by scientific and real-world examples, on the need for maintenance and reinforcement of investments in physical modelling, both to support the scientific community and to design buildings of significant economic, social and environmental impact.

Bacteriophages can provide alternative measures for the control of E. coli O157:H7 that is currently an emerging food-borne pathogen of severe public health concern. This study was aimed at characterising E. coli O157:H7 specific phages as potential biocontrol agents for these pathogens. Fifteen phages were isolated and screened against 69 environmental E. coli O157:H7. Only 3 phages displayed broad lytic spectra against environmental shiga toxin-producing E. coli O157:H7 strains. These 3 lytic phages were designated V3, V7 and V8. Subsequent characterization indicated that they displayed very high degree of similarities despite isolation from different locations. Transmission Electron microscopy (TEM) of the phages revealed that they all had isometric heads of about 73 – 77 nm in diameter and short tails ranging from 20 - 25 nm in diameter. Phages V3, V7 and V8 were assigned to the family Podoviridae based on their morphology. Pulsed field gel electrophoresis (PFGE) genome estimation of the 3 phages demonstrated identical genome sizes of ~ 69 nm. The latent periods of these phages were 20 min, 15 min, and 20 min for V3, V7 and V8 respectively while the burst sizes were 374, 349 and 419 PFU/ infected cell respectively. While all the phages were relatively stable over a wide range of salinity, temperatures and pH values, their range of infectivity or lytic profile was rather narrow on environmental E. coli O157:H7 strains isolated from cattle faeces. This study showed that the Podoviridae bacteriophages are the dominant E. coli O57:H7-infecting phages harboured in cattle faeces in the North-West Province of South Africa and due to their favourable characteristics can be exploited in the formulation of phage cocktails for the bio-control of E. coli O157:H7 in meat and other meat products.

Background Critical patients with novel coronavirus pneumonia ( COVID-19) have worse outcome and high mortality. However, the histopathology of critical patient with COVID-19 remains undisclosed. Methods We performed the whole lung biopsy, and described the pathological changes of critical COVID-19 patient done with transplant by HE staining, immunohistochemistry and special staining observed under the microscopy. Findings The whole lungs displayed diffuse congestive appearance and partly haemorrhagic necrosis on gross examination. The haemorrhagic necrosis was prominently present in outer edge of the right lower lung. The cut surfaces of the lung displayed severe congestive and haemorrhagic changes. The main pathological changes showed massive pulmonary interstitial fibrosis, and partly hyaline degeneration, variable degrees of hemorrhagic pulmonary infarction. Small vessels hyperplasia, vessel wall thickening, lumen stenosis, occlusion and microthrombosis formation. Focal monocytes, lymphocytes and plasma cells infiltrating into pulmonary interstitium. Bronchiolitis and alveolitis with proliferation, atrophy, desquamation and squamous metaplasia of epithelial cells. Atrophy, vacuolar degeneration, proliferation, desquamation and squamous metaplasia in alveolar epithelial cells. Alveolar cavity congestion was prominent, and contained mucus, edema fluid, desquamated epithelial cells, and inflammatory cells. We also found several multinucleate giant cells and intracytoplasmic viral inclusion bodies. Special stains including Masson stain, sirius red staining, reticular fibers staining indicated massive pulmonary interstitial fibrosis. Immunohistochemistry showed positive for immunity cells including CD3, CD4, CD8, CD20, CD79a, CD5, CD38 and CD68. Interpretation We demonstrate the pathological findings of critical patient with COVID-19, which might provide a deep insight of the pathogenesis and severity of this disease.

The study aims to provide technical information on the development and application of hazard analysis and critical control points (HACCP) in one of Dhaka's popular baking (cake) industries. A generic HACCP plan in accordance with legal requirements was created after a detailed analysis of data collected from the company. Every step of the production was examined for biological, chemical, and physical hazards. The prerequisite program was designed to address some hazards prior to production, thereby simplifying the HACCP plan. The critical control points were determined by answering the questions in the decision trees. Finally, the HACCP control chart was created to include critical limits, monitoring, and corrective action as components of several HACCP principles. One critical control point (CCP) and two operational pre-requisite programs (oPRPs) were identified throughout the manufacturing process.

Patient safety is one of the indicators of the quality of health services in the hospital, for that, it is necessary to have efforts from the hospital to create a system that can minimize the occurrence of errors and unexpected events that can harm patients, nurses as health workers who are the most numerous in the home. sick and with the patient for 24 hours, has an important role in maintaining patient safety. This study aims to explain how the role of nurses and cooperation between health workers in implementing patient safety measures in the hospital. The method used in this study is a literature review by analyzing and exploring relevant articles and focusing on interprofessional collaboration to improve patient safety. The articles used in this study were taken from 3 direct, Proquest, Pubmed science databases published in the last 3 years, namely between 2019-2021, nurses as part of the health team are required to be able to work together with other health professionals in hospitals with various characteristics, including education, gender, age, employment status and length of work, nurses are required to be committed to maintaining patient safety in the hospital.

Critical realism emerged from the philosophical writings of Roy Bhaskar, and has evolved into a philosophy of social science research using the model of “dialectical critical realism” (DCR) which begins with the researcher’s assumptions that the structures being researched have a real, ontological grounding which is independent of the researcher. This approach has proved fruitful in British and European social science research, but has had less influence in North America. We outline DCR’s four level model for understanding society and its changing social structures through “the pulse of freedom”. DCR has been used by Marxists, Muslims, Catholics and secular scholars who engage fruitfully in morphogenic dialogues leading to a critical realist understanding of society and social research, which transcends positivist and social constructionist models. Examples of DCR’s application in the fields of childhood research, child abuse, education, and research on organisations are outlined to illustrate the working of this new research paradigm. We are enthusiastic in our advocacy of DCR as a model of qualitative research, and for constructing models of positive social change, and are particularly impressed by the substantive and theoretical expositions of DCR by Priscilla Anderson, Matthew Wilkinson and Margaret Archer, whose work we document and review.

Fire accidents are common accidents amongst residential house occupants in Libya. Some of the factors that can mitigate fire accidents in Libyan residential houses include fire safety awareness and knowledge. This study investigated the level of awareness and knowledge of fire safety amongst residential house occupants in Libya. The possibility and consequences of fire hazards and risk existing in residential houses in Libya were also studied. Experimental data obtained for 1.5 m/s and 3.5 m/s as walking and running evacuation time, respectively amongst residential house occupants in Libya were also compared. The sample consist of 90 respondents with instruments of fire safety awareness and knowledge, fire hazard and consequences, and the involvement of residential house occupants in fire emergency. Statistical analysis was performed at p < 0.05 to determine the levels of residential awareness and knowledge regarding fire safety and the hazard and consequences. The findings illustrated that the items were highly reliable (α > 0.7) and normally distributed. Also, the results illustrated that the majority of residential house occupants in Libya have fair level of fire safety awareness and knowledge with overall percentage of 80% and 90%, respectively. On the other hand, the results further showed that majority of residential house occupants have good level of fire emergency involvement with 90%. This paper proposes a fire safety assessment method which may form the basis of future fire safety practice in Libya.

Urban rail transit has become the main mode to ease traffic congestion. Researches on the dynamic variation regularity of passenger flow distribution and passenger flow volume of urban rail transit hub platform have important implication in hub capacity design, operation organization and risk prevention. This paper proposes a passenger flow distribution integrating model (PFDIM) based on the basic theory analysis and basic parameter models of passenger flow distribution in hub platform. Simulation designs of PFDIM are built with Java and Anylogic, which contain simulation system functional framework, implementation path, simulation processes and simulation models. By case study, the performance comparison between two simulation methods indicates that simulation designs are scientific and accordant with the reality scene; calculation results prove that PFDIM has a good performance on describing the dynamic variation regularity of passenger flow distribution. Moreover, the experiments with different departure intervals could provide the reference for train scheduling under the viewpoint of traffic safety and service level.

A via ferrata (from the German “klettersteig”, hereinafter VF) is a sports route located on forest and mountains vertical rock walls equipped with steps, chains, artificial dams, bridges and other fixed elements and which have a steel cable (safety cable) all the way along allowing users to secure their progress and avoid possible falls [1]. This article aims to analyse the state of the art of the VF sector in Spain, especially in terms of the regulations of obligatory compliance, in addition to defining the basic characteristics of the installations to ensure that these are safe for users, providing a previously non-existent summary of the most important recommendations regardless of the country where they are installed.

It is a significant task to assess the safety of the aging offshore jacket platform in order to extend the service life. This paper analyzes the multiple risk factors of an aging jacket platform in Bohai Bay, China and builds the safety evaluation index system, which includes three levels, namely, the target layer, the first-grade indicators layer and the second-grade indicators layer. The target layer consists of three first-grade indicators: ocean environments, structure status, and human and organizational factors. Each first-grade indicator is divided into three second-grade indicators. The weight of each indicator is calculated by analytic hierarchy process to weaken subjective effect. Grey clustering method is applied to estimate the failure risk of the platform in Bohai Bay qualitatively and quantitatively. The assessment standard is divided into five grades and the whitening function of each grey cluster is determined by the assessment scheme. The grey evaluation weight vector of each second-grade indicator is calculated by the table dispatching method. Through layer by layer calculation, the grey assessment value of the target layer is finally estimated by making the grey assessment weight vector single-value and the grey grade is determined according to the maximum principle. The evaluation results show quantitatively that the failure risk grade of the jacket platform in Bohai Bay is medium and the safety assessment method is reasonable and feasible.

The software industry has adopted component-based software development (CBSD) to rapidly build and deploy large and complex software systems with significant savings at minimal engineering effort, cost, and time. However, CBSD encounters issues on security trust, mainly with respect to dependability attributes. A system is considered dependable when it can produce the outputs for which it was designed with no adverse effect on its intended environment. Dependability consists of several attributes that imply availability, confidentiality, integrity, reliability, safety, and maintainability. Dependability attributes must be embedded in a CBSD model to develop dependable component software. Motivated by the importance of these attributes, this paper pursues two objectives: to design a model for developing a dependable system that mitigates the vulnerabilities of software components, and to evaluate the proposed model. The model proposed in this study is labelled as developing dependable component-based software (2DCBS). To develop this model, the CBSD architectural phases and processes must be framed and the six dependability attributes embedded according to the best practice method. The expert opinion approach was applied to evaluate 2DCBS framing. In addition, the 2DCBS model was applied to the development of an information communication technology (ICT) portal through an empirical study method. Vulnerability assessment tools (VATs) were employed to verify the dependability attributes of the developed ICT portal. Results show that the 2DCBS model can be adopted to develop web application systems and to mitigate the vulnerabilities of the developed systems. This study contributes to CBSD and facilitates the specification and evaluation of dependability attributes throughout model development. Furthermore, the reliability of the dependable model can increase confidence in the use of CBSD for industries.

The umbrella concept for the current efforts to digitize construction is known as Construction 4.0. One of its key concepts is cyber-physical systems. The construction industry is not only creating increasingly valuable digital assets (in addition to physical ones) but also the buildings and built infrastructures are increasingly monitored and controlled using digital technology. Both make construction a vulnerable target of cyber-attacks. While the damage to digital assets, such as designs and cost calculations, may result in economic damage, attacks on digitally-controlled physical assets may damage the well-being of occupants and, in worst-case scenarios, even damage (or death) to the users. The problem is amplified by the emerging cyber-physical nature of the systems, where the human checks may be left out. We propose that construction learns from the work done in the context of critical infrastructures (CI). First, a lot of CI is construction-related, and the process of designing and building it must be secured accordingly. Second, while most assets may not be critical in the CI sense, they are critical to the operations of a business and the lives of citizens. In the end, we recommend some steps so that well-established processes of critical infrastructure protection trickle down to make Construction 4.0 and the built environment more cyber-secure. With that in mind, we describe the possible inclusion of Construction 4.0 considerations into existing critical infrastructure protection (CIP) frameworks with minimum frictions. We also propose some suggestions regarding possible future courses of action to improve the increasingly vulnerable cyber-security environment of the built environment across all life cycle phases - design, construction, operation, maintenance, and end of life.

Street vended foods are ready-to-eat food and beverages prepared and/ or sold in the streets. This trade provides for 85-99% of total employment in most African countries and 50% or more is constituted by women. The preparation of street vended foods is normally under unsatisfactory conditions and these may lead to the contamination of food. This descriptive survey was conducted in Maseru around the taxi ranks amongst 141 participants (48 food handlers and 93 consumers) using a semi structured questionnaire, open ended questionnaire and observation checklist. Majority of the food handlers were females (n=35, 60%) and males constituted only (n=23, 40%). On average the vendor population that participated in this study was considered to have poor knowledge of food safety since they scored 49%±11. With regard to the consumers, 63% were males and 37% were females, and only 6% reported that they never buy street vended foods mainly due to the food safety issues and hygiene. Based on the results of this study, it is thus recommended that educational interventions be implemented. The observation study showed that they also operated under unhygienic conditions and 95% of food handlers had the incorrect knowledge that washing utensils with detergent leaves them free of contamination. Regarding the consumer perceptions, they highlighted that the trade has the potential to grow and be profitable on condition that hygiene is emphasized and infrastructure improved so as to provide safe quality food.

A low-cost data logging platform is presented for environmental monitoring projects that provides long-term operation in remote or submerged environments. Three premade “breakout boards” from the open-source Arduino ecosystem are assembled into the core of the platform. The components are selected based on low-cost and ready availability, making the loggers easy to build and modify without specialized tools, or a significant background in electronics. Power optimization techniques are explained. The platform has proven to be highly reliable, and capable of operating for more than a year on standard AA batteries. The flexibility of the system is illustrated with two ongoing field studies recording drip rates in a cave, and water flow in a flooded cave system.

Streets are primary elements through which the character of urban neighborhoods are experienced and expressed. The “sense of safety” in neighborhood streets is paramount to social and psychological wellbeing of its residents and visitors. The intention of this study was to explore environmental and social cues of a neighborhood, which evoke fear of crime, which will help designers to prevent the generation of such negative feelings and promote more safe and comfortable spaces in our cities. This study used interviews, group discussions and observations to identify fear-generating factors with a sample of participants in the multi ethnic neighborhood of Kotahena in Colombo, Sri Lanka. Field data was analyzed through visual documentation and photographic surveys. Moreover, group discussions, interviews and personal observations were used to synergize the study objectives. The findings inform that fear of crime on streets is influenced by both environmental and social cues to varying degrees. Feelings of fear were associated with gender, ethnicity and less familiarity with the place as participants were from an ethnic minority within the community. Literature has emphasized that fear of crime has a connection to actual crime locations. The research findings, however, indicate that fear of crime spots identified by the residents do not have a direct relationship to the actual crime locations.

Despite the development of technologies, modern methods of disposal of end-of-life tires most often represent either the incineration in cement kilns or the destruction of tires in special landfills, showing a lack of sustainable recycling of this valuable material. The fundamental role of recycling is evident, and the development of high-efficiency processes represents a priority for the European market. Therefore, investigation of end-of-life rubber processing methods is of high importance for manufacturers and recyclers of rubber materials. In this paper, methods of processing of end-of-life tires are reviewed in order to obtain rubber crumb, which can later be used in the production of new industrial rubber goods and composite The processes of separation end-of-life tire into fractions by type of materials using mechanical processing methods along with mechanochemical and mechanical processes of processing the materials of used tires in order to obtain crumb rubber of various fractions and chemical reactivity are considered.

In this paper, we study the semilinear pseudo-parabolic equations $\displaystyle u_{t} - \triangle_{\mathbb{B}}u - \triangle_{\mathbb{B}}u_{t} = \left|u\right|^{p-1}u$ on a manifold with conical singularity, where $\triangle _{\mathbb{B}}$ is Fuchsian type Laplace operator investigated with totally characteristic degeneracy on the boundary $x_{1} = 0$. Firstly, we discuss the invariant sets and the vacuum isolating behavior of solutions with the help of a family of potential wells. Then, we derive a threshold result of existence and nonexistence of global weak solution: for the low initial energy $J(u_{0})<d$, the solution is global in time with $I(u_{0}) >0$ or $\displaystyle\Vert \nabla_{\mathbb{B}}u_{0}\Vert_{L_{2}^{\frac{n}{2}}(\mathbb{B})} = 0$ and blows up in finite time with $I(u_{0}) < 0$; for the critical initial energy $J(u_{0}) = d$, the solution is global in time with $I(u_{0}) \geq0$ and blows up in finite time with $I(u_{0}) < 0$. The decay estimate of the energy functional for the global solution and the estimates of the lifespan of local solution are also given.

Improperly prepared fresh fruit and vegetable juices are recognized as an emerging cause of food borne illnesses. Therefore, this study was aimed at evaluating the microbiological safety of fresh fruit juices marketed in Debre-Markos town and their hygienic conditions of preparations. Thirty six fruit juices samples were collected from 6 cafés and restaurants of Debre-Markos town and analyzed for total aerobic viable bacterial count (TAVBC), total staphylococcal count (TSC), aerobic spore forming bacterial count (ASFBC), total coliform count (TCC), fecal coliform count (FCC), yeast and mould count (YMC). The spread plate method was used for the isolation of microorganisms on appropriate selective media. All isolates were characterized following standard methods. Bacterial and fungal species were isolated following standard methods. Questionnaires were distributed for 30 juice makers to obtain preliminary information on hygienic and safety practices of fruit juice makers. Results show that the mean TAVBC, ASFBC, TSC, yeast and mold, TCC and FCC of mango were 2.2±0.48x10⁶,0.13±0.04x10⁵ ,0.004x10⁵ ,1.1±0.2x10⁶ ,0.15±0.05x10⁵,5.7±3.73x10⁴ and 0.06±0.04x10⁴ cfu/ml respectively. The mean of TAVBC, ASFBC, TSC, YMC, TCC, and FCC of avocado juice were 3.6±0.6x10⁶, 0.08±0.02x10⁵, 0.27±0.07x10⁵, 1.2±0.4x10⁶, 0.02±0.01x10⁵, 6.46±3.7x10^4, and 0.2±0.1x10⁴ cfu/ml respectively. The bacterial isolates were identified as Staphylococcus aureus, Escherichia coli, Klebsiella spp. Bacillus cereus, Enterobacter spp., Enterococcous spp., Streptococcus spp., and Serratia spp. while the identities of the fungal isolates were Fusarium spp., Mucor spp. and Saccharomyces cerevisiae. The results also showed that the microbial loads of most of the fruit juices were higher than the specifications set for fruit juices sold in the Gulf region and other parts of the world. Most venders obtained fruit from the open market and all juice makers lacked special training in food hygiene and safety. Therefore, regular training and health education on food hygiene and safety is recommended for juice handlers to improve the quality of fresh fruit juices in the study area.

Power quality problem is a hot area in power systems and drives that has drawn the attention of many researchers. This is because of the threat it poses on the health of electrical systems and the cost incurred on utility bills. The problem arises as a result of the need for reactive power to be supplied alongside active power in power transmission and distribution. Unfortunately, reactive power is consumed by almost all components of the system, leading to a shortage. To solve this problem, there is a need to compensate for the lost reactive power. Several researchers have proposed various approaches to mitigate this problem such as thyristor switched capacitor bank, series compensator, series reactor, series var compensator (SVC), Static Synchronous Compensator (STATCOM), synchronous condenser and others. In order to further draw attention in this area, this work investigates a number of research papers on power compensation techniques and draw up challenges from each work that can be considered for further investigation. To this end, each research paper reviewed is evaluated in terms of problem solved, technique used, and results obtained. It therefore offers ample opportunities for researchers to explore in improving power quality and power system safety.

Volcanic ash deposited on paved surfaces during volcanic eruptions often compromises skid resistance, which is a major component of safety. We adopt the British pendulum test method in laboratory conditions to investigate the skid resistance of road asphalt and airfield concrete surfaces covered by volcanic ash sourced from various locations in New Zealand. Controlled variations in ash characteristics include type, depth, wetness, particle size and soluble components. We use Stone Mastic Asphalt (SMA) for most road surface experiments but also test porous asphalt, line-painted road surfaces, and a roller screed concrete mix used for airfields. Due to their importance for skid resistance, SMA surface macrotexture and microtexture are analysed with semi-quantitative image analysis, microscopy and a standardised sand patch volumetric test, which enables determination of the relative effectiveness of different cleaning techniques. We find that SMA surfaces covered by thin deposits (~1 mm) of ash result in skid resistance values slightly lower than those observed on wet uncontaminated surfaces. At these depths, a higher relative soluble content for low-crystalline ash and a coarser particle size results in lower skid resistance. Skid resistance results for relatively thicker deposits (3-5 mm) of non-vesiculated basaltic ash are similar to those for thin deposits. There are similarities between road asphalt and airfield concrete, although there is little difference in skid resistance between bare airfield surfaces and airfield surfaces covered by 1 mm of ash. Based on our findings, we provide recommendations for maintaining road safety and effective cleaning techniques in volcanic ash environments.

Bisphenol A production plant possesses considerable potential risks in the top of the methanol separation column, as pressurized acetone, methanol and water are processed at an elevated temperature, especially in the event of an abnormal pressure increase due to sudden power outage. This study assesses the potential risks in the methanol separation column through hazard and operability assessment and evaluates the damages in the case of fire and explosion accident scenarios. The study chooses three leakage scenarios: a 5-mm puncture on the methanol separation column, a 50-mm diameter fracture of a discharge pipe and a catastrophic rupture, and simulates using Phast (Ver. 6.531) the concentration distribution of scattered methanol, thermal radiation distribution of fires and overpressure distribution of vapor cloud explosions. Implementation of safety instrumented system equipped with two-out-of-three voting as a safety measure can detect overpressure at the top of the column and shut down the main control valve and the emergency shutoff valve simultaneously, all at the same time. By applying safety integrity level of three, the maximal release volume of the safety relief valve can be reduced and therefore, the design capacity of the flare stack can also be reduced. Such integration will lead to improved safety at a reduced cost.

.Most of the accident cases at work are caused by unsafe behaviour. Scholars have thus extensively researched factors of safe behavior.Safety leadership is stated as the most effective factor in safety behaviour. Besides, safety knowledge and safety attitudes are also found to influence safety behaviour. The purpose of this paper is to investigate the nature of the relationship between safety leadership, safety knowledge, safety attitude, and safety behavior, which has been found to be limited or rare in previous research.A self-administered questionnaire was applied and was distributed randomly to 140 SME manufacturing workers and they were analysed using the structural equation modelling partial least squares (PLS-SEM). The results prove that safety leadership has a significant effect on safety knowledge, safety attitude, and safety behaviour, with safety knowledge and safety attitude mediating the safety leadership-safety behaviour relationship. Consequently, the results provide a more in-depth view of the relationship between safety leadership and safety knowledge-attitude-behaviour via adapting social-cognitive theory and social learning theory in solving safety issues in SME. This study also provides a starting point for researchers to better understand how effective safety leadership is provided by supervisors in terms of improving worker safety and safety knowledge-attitude-behaviour.

In an era characterized by a move towards a “knowledge society”, universities are central in fostering “knowledgeability”, that is the reflexive understanding of knowledge in knowledge societies. The objective of “knowledgeability” can be met through creating a stronger link between education and research. Furthermore, overall student performance, for example in critical thinking and problem solving, can be improved if research-related activities are incorporated into the curriculum. The aim of this paper is to use inter-national examples to discuss the research- education nexus from four different perspectives, namely context, policy, im- plementation and quality, with case studies from higher education institutions in Singapore and Sweden. We suggest that different integrative technologies can be used to enhance the links, but it will be essential to consider the inputs of training, service and support in using new technology. Interestingly, the act of evaluating the link between edu- cation and research will increase awareness of this linkage by stakeholders involved in both education and research. In turn the link can be strengthened, contributing to increased quality in both education and research.

Subjective paranormal experience (SPE) has been a notable part of the human historical narrative. Alleged miracles, telepathy, clairvoyance, precognition, witchcraft, spiritualism, monsters and ghosts have received a supernatural interpretation. The incidence and prevalence of reported SPE remains at high levels in all populations investigated to date. Previous research on SPE has focused on the cognitive and social factors that facilitate paranormal beliefs and experiences. I consider here developmental factors in the brain’s responses to trauma that appear to predispose certain individuals towards SPE. The theory draws upon the established mechanisms of dissociation and fantasy generation to describe and explain the origins of paranormal experience. The theory hypothesizes that childhood abuse and victimization trigger autonomic responses of dissociation, depersonalization and compartmentalization. Freezing and associated releases of fantasy serve as a survival strategy in the homeostatic regaining of safety and control. The predictions from the homeostasis theory are consistent with the findings of multiple studies and falsifying evidence has yet to be identified.

Purpose: To compare the therapeutic efficacy and safety of dorzolamide/timolol fixed-combination in newly diagnosed primary open angle glaucoma patients. Methods: In this prospective, interventional case series, newly diagnosed primary open angle glaucoma (POAG) patients that had not been treated for glaucoma were included. Patients were started on Cosopt twice a day (BID) for 1 month and then switched to three times a day (TDS) for additional 1 month. Patients underwent comprehensive ophthalmic examination, diurnal intraocular pressure (IOP), blood pressure (BP) and 24-hours heart rate (HR) measurements at baseline, month 1( BID), and month 2( TDS). IOP, systolic and diastolic pressures were measured at 8:00 AM,12:00 AM, 4:00 PM, 8:00 PM and 12:00 PM. Throughout the study, all adverse events were recorded and monitored by the investigators. Results: In 31 POAG patients that completed the study ,mean baseline IOP was 23.1±3.15 mmHg . IOP was decreased significantly 16.5 ± 2.21 at 1 month (P < 0.0001) and 13.9 ± 2.23 mmHg at 1 and 2 month follow up. (P < 0.0001) IOP was significantly lower in month 2 compared to month 1 (P = 0.0004). While Cosopt BID significantly reduced the mean 24-hour systolic BP and mean 24-hour HR from baseline (P < 0.0001), the mean 24-hour systolic BP and HR remained unchanged 2ith Cosopt TDS compared to BID (P = 0.62). Conclusions: Cosopt TDS has a superior IOP-lowering effect than Cosopt BID in POAG patients with comparable safety profile.

Disposable absorbent hygiene products have evolved for superior performance, enhancing the convenience of daily lives. Yet the use of disposable hygiene pads has brought safety concerns on chemical exposure, and significant efforts have been made to assess the potential risks associated with use of hygiene pads. This article intends to overview the safety assessment framework of diapers and feminine pads, which includes hazard identification, hazard characterization, exposure assessment, risk characterization, and postmarket risk management. Risk assessment of various constituents are reviewed for quantification methods and conservative estimation of exposure parameters. By reviewing the up-to-date considerations in risk assessment, we aim to provide insightful discussion on safety evaluation of current versions of disposable absorbent products. More clinical testing and postmarket surveillance are needed for continuous monitoring of potential health impacts of advanced products and constituents.

The aim was to evaluate levels of compassion fatigue in nursing professionals working in complex care units of a Brazilian university hospital. A cross-sectional, descriptive, and correlational study was carried out with nursing workers from complex care units of a University Hospital. Data were collected in the second half of 2019, in the pre-pandemic period of COVID-19, using the Brazilian version of the Professional Quality of Life Scale (ProQoL-BR). A total of 146 individuals partici-pated, including 41 (28.1%) nurses, 92 (63.0%) nursing technicians and 13 (8.9%) nursing assis-tants. It was observed that 26.1% presented high level of compassion satisfaction. For 17.5% there was level of burnout and 49.7%, medium level of burnout; and 22.0% with high and 46.1% with medium level of secondary traumatic stress. Twenty-eight (19.2%) professionals had compassion fatigue, of which 16 (57.1%) were nursing technicians. There is a high percentage of professionals with medium and high rates of burnout and secondary traumatic stress, a fact that is reinforced by the presence of compassion fatigue in almost one fifth of the studied individuals. These results highlights how much the health of these workers can be affected by living with traumatic patient experiences.

BACKGROUND: Manufacturing costs, along with operational performance, are among the major factors determining the selection of the propulsion system for unmanned aerial vehicles (UAVs), especially for aerial targets and cruise missiles. OBJECTIVES: In this paper, the design requirements and operating parameters of small turbofan engines for single-use and reusable UAVs are analysed to introduce alternative materials and technologies for manufacturing their compressor blades, such as sintered titanium, a new generation of aluminium and an alloy based on titanium aluminides. METHODS: To assess the influence of severe plastic deformation (SPD) on the hardening efficiency of the proposed materials, the alloys in the coarse-grained and submicrocrystalline states were studied. Changes in physical and mechanical properties of materials were taken into account. The thermodynamic analysis of the compressor was performed in a finite element analysis system (ANSYS) to determine the impact of gas pressure and temperature on the aerodynamic surfaces of compressor blades of all stages. RESULTS: Based on thermal and structural analysis, the stress and temperature maps on compressor blades and vanes were obtained, taking into account the physical and mechanical properties of advanced materials and technologies of their processing. The safety factors of the components were established based on the assessment of their stress-strength reliability. Thanks to nomograms, the possibility of using the new materials and the technologies was confirmed in view of the permissible operating temperature and safety factors of blades. CONCLUSIONS: The proposed alternative materials and production technologies for the compressor blades and vanes meet the design requirements of the turbofan at lower manufacturing costs.

An on-site, ultra-sensitive, and quantitative sensing method was developed based on quantum dot nanobeads (QDNBs) and test strip for the determination of total aflatoxins (AFTs) in rice and peanut. The monoclonal antibody against AFT (mAbAFT) was home-made and labeled with QDNB. After the pre-coating of the AFT antigen on the test line (T line), the competitive immunoreactions were conducted between AFT and AFT antigen on the T line with QDNBs-mAbAFT. Under optimal conditions, this approach allowed a rapid response towards AFT with a considerable sensitivity of 1.4 pg/mL and 2.9 pg/mL in rice and peanut matrices, respectively. The put-in and put-out duration were within 10 min. The recoveries for AFT in rice and peanut samples matrices were recorded from 86.25–118.0% with the relative deviations (RSD) below 12%. The assay was further validated via the comparison between this QDNB strip and the conventional HPLC method using spiked samples. Thus, the design provided a potential alternative for on-site, ultra-sensitive, and quantitative sensing of AFT that could also be expanded to other chemical contaminants for food safety.

This review of current research into at-risk programs serves to categorise and characterise existing programs and to evaluate the contribution of these programs to assisting students at-risk from marginalised backgrounds. This characterisation questions the (sometimes) implicit assumptions and the consequences of those assumptions inherent in and behind these various accounts. This involves a synthesis and reformulation, based on epistemological standpoints, both explicit and implied, of the various researchers. Using as a lens the (various and varied) understandings of social justice and the goals of education (Gale & Densmore, 2000; 2003) I identify three sometimes overlapping and sometimes contesting standpoints in relation to at-risk students, characterised as instrumentalist or rational technical, social constructivist or individualist and critical transformative or empowering. I argue that programs ‘which simply seek to achieve change in the individual young people are doomed to failure’ (Stewart, 1998, 4) and that a critical transformative understanding of at-risk may deliver improved outcomes for young people by challenging ‘the school context in which the young people are located’ (Stewart, 1998, 4).

Euler’s product formula over the primes and Euler’s zeta function equate to enshrine the Fundamental Theorem of Arithmetic that every integer > 1 is the product of a unique set of primes. The product formula has no zero, and with a domain ≤1 Euler’s zeta diverges. Dirichlet’s eta function η(s), negates alternate terms of zeta, permitting convergence when s∈C and Re(s) < 1, and its non-trivial zeros {ρ}, have a deep relationship with the distribution of the primes. The Riemann Hypothesis is that all the non-trivial zeros have Re(ρ) = 1/2. This work examines the symmetries in a partial Euler’s zeta series with a complex domain equating it to the difference between two finite vector series whose matched terms have mirror-image arguments, but whose magnitudes differ when Re(s) ≠ 1/2. Analytical continuation generates a modified eta series η_l(s), in which every l^th term is multiplied by (1-l). If the integer l is appropriately determined by the Im(s), similar paired finite vector series have a difference that closely follows η_l (s) and their terminal vectors intersect in a unique way permitting zeros only when Re(s) = 1/2. Furthermore, those vectors tracking the derivatives of the series, have a special relationship permitting zeros of the differential only when Re(s) > 1/2.

In order to establish a new discipline specializing in accident science from the perspective of safety science. Under the guidance of the current research theories and methods of safety science, combined with the research paradigm of humanities and social medicine, this paper puts forward new viewpoints, new theories and new models about accident research. First of all, through literature retrieval, this paper analyzes the relevant research results of accidents at home and abroad, and expounds the existing problems and the basic trend of accident science research. Secondly, it puts forward eight kinds of attribute relations of the accident, and makes clear the characteristics and connotation of the accident. In the study of accident types, a hierarchical classification model based on accident cognition is created for the first time. It also points out the logical relevance of five levels of accident science research and the realistic relevance of three levels. At the same time, according to the thought of science of science, this paper puts forward a new definition of safety under the thinking of accident science and other basic concepts related to safety science, and explains the connotation. In addition, it creates and constructs the basic concept of accident science, establishes the conceptual model of accident science, and points out the “3-4-5” model of accident science research and its connotation. Thirdly, draw lessons from the interdisciplinary paradigm to study the relevant theoretical basis and discipline classification relationship of accident science, and construct the tree of accident science. Finally, the research contents of three main aspects of accident science are summarized. The results show that the research results in this paper not only play a fundamental role in the basic construction of accident science, but also further enrich and perfect the discipline system of safety science, which has a certain theoretical significance.

The overarching purpose of this review was to highlight the utility of different aerobic field tests in terms of the parameters they provide, with a specific focus on shuttle running and all-out testing. Various field tests are discussed in detail and are categorised according to linear continuous running tests (e.g. 12-minute Cooper Test, University of Montreal Track Test [UMTT], 1200/1600 m time trials, 3-minute all-out test for running [3MT]), intermittent shuttle running tests (e.g. yo-yo inter-mittent recovery test level 1 [YYIR1], 30-15 intermittent fitness test [IFT], and the intermittent all-out shuttle test [IAOST]), and continuous shuttle running tests (e.g. 1.2 km shuttle run test [1.2SRT], maximal multi-stage 20-m shuttle test [MSR], 25-m, 30 m and 50-m 3-minute all-out shuttle test [AOST]). Readers will be guided through the theoretical and practical underpinnings of the 3MT methodology, where the all-out testing methodology is stationed within the testing paradigm, and how to practically implement and interpret the results thereof.

There is limited evidence for the association between malnutrition and hospital mortality as well as Intensive Care Unit length-of-stay (ICU-LOS) in critically ill patients. We aimed to examine the aforementioned associations by conducting a prospective cohort study in an ICU of a Singapore tertiary hospital. Between August 2015 and October 2016, all adult patients with ≥24 h of ICU-LOS were included. The 7-point Subjective Global Assessment (7-point SGA) was used to determine patients’ nutritional status within 48 hours of ICU admission. Multivariate analyses were conducted in two ways: 1) presence versus absence of malnutrition, and 2) dose-dependent association for each 1-point decrease in the 7-point SGA. There were 439 patients of which 28.0% were malnourished, and 29.6% died before hospital discharge. Malnutrition was associated with an increased risk of hospital mortality [adjusted-RR 1.39 (95%CI: 1.10–1.76)], and this risk increased with a greater degree of malnutrition [adjusted-RR 1.09 (95%CI: 1.01–1.18) for each 1-point decrease in the 7-point SGA]. No significant association was found between malnutrition and ICU-LOS. Conclusion: There was a clear association between malnutrition and higher hospital mortality in critically ill patients. The association between malnutrition and ICU-LOS could not be replicated and hence requires further evaluation.

Background: Australia received its first case of coronavirus on 25 January 2020. Since then the demands of COVID-19 has presented unparalleled levels of strain on the public healthcare systems in the country. In this time of crisis, pharmacists and community pharmacy staff have modified work strategies according to the rapidly changing environment. With a delayed dissemination of resources and guidelines, pharmacist and pharmacies are practicing innovative infection control methods across Australia to protect their staff, patients and the community. This article seeks to explore the current activities undertaken by pharmacists in various community pharmacy settings across Australia in relation to the safety of the workplace environments for staff and patients. Information collected can help inform future decisions in pandemic preparation for pharmacies in response to similar health crisis now and in the future. Methods: An online cross-sectional survey study was conducted in Australia during the COVID-19 outbreak from 1^st to 30^th April 2020. The questionnaire addressed community pharmacist’s awareness and response to infection and sanitation control. Results: A total of 137 pharmacists took part in the survey, with almost half (45.26%) belonging to the age group of 25 to 34 years. Community pharmacy formed the bulk (89.05%) of the respondent’s primary place of practice. There was a good uptake of safety measures by pharmacists and their pharmacies to protect staff and patients. However the task of reassigning high health risk staff was not heavily practiced (34.31%). Regular cleaning took place in the pharmacy, but the use of gloves while cleaning was not practiced in 48.18% of respondents. In addition, only 46.72% of respondents reported observing script baskets being cleaned and disinfected. About one-third (37.96%) of pharmacists were aware of the two-step cleaning and disinfecting process, but only 18.98% of pharmacists reported observing or performing this sanitation procedure. More than half of surveyed pharmacists reported having difficulty keeping up with infection control changes and pharmacy practice guidelines during the pandemic. Conclusion: This study demonstrates that the majority of pharmacists are not fully aware of the infection control measures needed in a community pharmacy setting. The influx of coronavirus updates has made it difficult for pharmacists to implement accurate procedures on some aspects of workplace hygiene, which may have led to some gaps in infection control measures. Pharmacists must aim to uphold their public health ambassador role and aim to keep up-to-date with professional guidance to provide the necessary infection control measures to ensure staff, patient and public health safety.

There is growing recognition in research and policy of a mental health crisis among Canada’s paramedics but despite this, epidemiological surveillance of the problem is in its infancy. Just weeks before the emergence of the COVID-19 pandemic, we surveyed paramedics from a single, large, urban paramedic service in Ontario, Canada to assess for symptom clusters consistent with Post-Traumatic Stress Disorder (PTSD), major depressive disorder, and generalized anxiety disorder and to identify potential risk factors for each. In total, we received 589 completed surveys (a 97% completion rate) and found that 11% screened positive for PTSD, 15% for depression, and 15% for anxiety, with 1 in 4 active-duty paramedics screening positive for any of the three as recently as February 2020. In adjusted analyses, the risk of a positive screen varied as a function of employment classification, gender, self-reported resilience, and previous experience as a member of the service’s peer support team. Our findings support the position that paramedics screen positive for mental disorders at high rates – a problem likely to have worsened since the onset of the COVID-19 pandemic. We echo the calls of researchers and policymakers for urgent action to support paramedic mental health in Canada.

Polyethylene glycol (PEG) is an inert, water soluble polymer, used for decades in pharmaceuticals. Although PEG is considered safe, concerns persist about the potential adverse effects of long-term exposure to PEG-containing therapies, specifically in children, following the introduction of PEGylated recombinant factor products used for the treatment of hemophilia. Given the absence of long-term surveillance data, and to evaluate the potential risk, we estimated PEG exposure in the pediatric population receiving US Food and Drug Administration-approved parenteral therapies with pediatric indications. We used a range of pediatric weights and doses based on prescribing information (PI) or treatment guidelines. PIs and reporting websites were searched for information about adverse events (AEs). For a child weighing 50 kg on the highest prophylactic dose of a FVIII product, the range of total PEG exposure was 40–21,840 mg/year; for FIX products, the range was 13–1342 mg/year; and for other products, the range was 383–26,743 mg/year, primarily as a derivative excipient. No AE patterns attributable to PEG were found for any of these products, including potential renal, neurological, or hepatic AEs. Our analyses suggest the pediatric population has had substantial exposure to PEG for several decades, with no evidence of adverse consequences.

For centuries, crop plants have represented the basis of the daily human diet. Among them, cereals and legumes, accumulating oils, proteins and carbohydrates in their seeds, distinctly dominate modern agronomic practice. Indeed, these plants play an essential role in the food industry and fuel production. Therefore, the seeds of crop plants are intensively studied by food chemists, biologists, biochemists, and nutritional physiologists. Accordingly, not only seed development and germination, but also age- and stress-related alterations in seed vigor, longevity, nutritional value and safety can be addressed by a broad panel of analytical, biochemical and physiological methods. Currently, functional genomics is one of the most powerful tools, giving direct access to characteristic metabolic changes, accompanying plant development, senescence and response to biotic or environmental stress. Among individual methodological platforms, proteomics represents one of the most effective ones, giving access to cellular metabolism at the level of proteins. Here we discuss the main methodological approaches employed by seed proteomics in the context of physiological changes related to seed development, ageing and response to environmental stress.

This paper presents a study conducted to identify, assess, rank, and compare the most influencing factors causing schedule delay during construction phase of petrochemical projects in Saudi Arabia. The methodology followed in this research to achieve the main aims is a combination of comprehensive review of the literature and interviewing number of local experts, which have resulted in identifying of 23 factors. Through a web-based questionnaire survey, the identified factors were ranked. Total of 90 completed responses were gathered from 106 received responses. The completed responses gathered from 38 contractors and 52 owners. Of 90 participants, there are 32 project managers, 22 project engineers, 7 construction supervisors and the other 31 having different positions in projects departments The study has found that the most influencing factors causing schedule delay during construction in petrochemical projects in Saudi Arabia are “Poor site management and supervision by contractors”; “Conflict between main contractor and subcontractor”; “poor planning and scheduling of projects by contractor”; “Delay of material or equipment delivery”; and followed by “Delay in Handing Over Construction Site to Contractor”. This paper is original in the sense that the areas of knowledge and practice covered in the identified factors were distributed and not available in one source. The factors are derived from personal interviews with selected project managers, project engineers, construction supervisors and the others from different positions in project department and from the relevant literature.

Computationally modelling a nuclear reactor startup core for a benchmark against the existing models is highly desirable for an independent assessment informing nuclear engineers and energy policymakers. This work presents a startup core model of the UK’s first Evolutionary Pressurised Water Reactor (EPR) based on Monte Carlo simulations of particle collisions using Serpent 2, a continuous-energy Monte Carlo reactor physics burnup code. Coupling between neutronics and thermal-hydraulic conditions with the fuel depletion is incorporated into the multi-dimensional branches, obtaining the thermal flux and fission rate (power) distributions radially and axially from the three dimensional (3D) single assembly level to a 3D full core. Shannon entropy is employed to characterise the convergence of the fission source distribution, with 3 billion neutron histories tracked by parallel computing. Source biasing is applied for the variance reduction. Benchmarking the proposed Monte Carlo 3D full-core model against the traditional deterministic transport computation suite used by the UK Office for Nuclear Regulation (ONR), a reasonably good agreement within statistics is demonstrated for the safety-related reactivity coefficients, which creates trust in the EPR safety report.

In this paper, we present a complete, flexible and safe convex-optimization-based method to solve speed planning problems over a fixed path for autonomous driving in both static and dynamic environments. Our contributions are five fold. First, we summarize the most common constraints raised in various autonomous driving scenarios as the requirements for speed planner developments and metrics to measure the capacity of existing speed planners roughly for autonomous driving. Second, we introduce a more general, flexible and complete speed planning mathematical model including all the summarized constraints compared to the state-of-the-art speed planners, which addresses limitations of existing methods and is able to provide smooth, safety-guaranteed, dynamic-feasible, and time-efficient speed profiles. Third, we emphasize comfort while guaranteeing fundamental motion safety without sacrificing the mobility of cars by treating the comfort box constraint as a semi-hard constraint in optimization via slack variables and penalty functions, which distinguishes our method from existing ones. Fourth, we demonstrate that our problem preserves convexity with the added constraints, thus global optimality of solutions is guaranteed. Fifth, we showcase how our formulation can be used in various autonomous driving scenarios by providing several challenging case studies in both static and dynamic environments. A range of numerical experiments and challenging realistic speed planning case studies have depicted that the proposed method outperforms existing speed planners for autonomous driving in terms of constraint type covered, optimality, safety, mobility and flexibility.

In past years, lithium-ion batteries (LIBs) can be found in every aspect of life, and batteries, as energy storage systems (ESSs), need to offer electric vehicles (EVs) more competition to be accepted in markets for automobiles. Thick electrode design could reduce the use of non-active materials in batteries that its energy density would be improved and its cost would be cut. However, thick electrodes are limited by their weak mechanical stability and poor electrochemical performance, these limitations could be classified as the critical cracking thickness (CCT) and the limited penetration depth (LPD). The understanding of the CCT and the LPD have been proposed and the recent works on breaking the CCT and improving the LPD are listed in this article. By comprising these attempts, some thick electrodes could not offer higher mass loading or higher accessible areal capacity that would defeat the purpose.

The aim of this study was to develop, implement, and evaluate a new auxiliary enterprise risk management framework and process to serve as an enabler to the global ISO 31000 risk framework and ISO 31010 processes. This framework has been designed particularly for use within high-risk environments and those characterized by volatility, uncertainty, complexity, and ambiguity (VUCA). This paper proposes a methodology for optimization of structured sharing and grass-roots management of all available risk-sentience information with the assessed potential to develop into an identifiable risk in the future. The author introduces new risk terminology including risk-sentience, risk-sentience information, and risk-sentience management. The process involved the development of the Theory of Risk-Sentience (ToRS), Risk-Sentience Auxiliary Framework (RSAF) and a risk-sentience management process referred to as LUOMEAR (Learning from Uncertainties, Others Mistakes, Experiences and Anecdotal Reporting). Manchester Patient Safety Framework (MaPSaF), SWOT (Strengths, Weaknesses, Opportunities, and Threats) analysis, and a newly developed Risk-Sentience Fertility Checklist were used to conduct pre and post-trial evaluations. The findings include positive adjustments in safety culture, components of commitment to quality, communication and team-working around safety issues, access to evolving risk-information, and efficient sharing and management of recorded risk-information. Recommendations are made for more extensive application of both the proposed auxiliary risk framework and process within high-risk sectors to further explore its effectiveness and scope.

This paper presents a methodology for determining the sensitivity of the main air flow directions in ventilation subnetworks to changes of aerodynamic resistance and of air density in mine workings. Formulae for determination of the sensitivity of the main subnetwork air flows by establishing the degree of dependency of the air volume stream in a given working on the variations in resistance or air density of other workings of the network have been developed. They have been implemented in the VentGraph mine ventilation network simulator. This software, widely used in Polish collieries provides an extended possibility to predict the process of ventilation, air distribution and, in the case of underground fire, also the spread of combustion gasses. The new method facilitates assessment by mine ventilation services of the stability of ventilation systems in exploitation areas and determine of the sensitivity of the main subnetwork air flow directions to changes of aerodynamic resistance and air density. Recently in some Polish collieries new longwalls are developed in seams located deeper then the bottom of the intake shaft. Such solution is called “exploitation below the level of access” or “sublevel”. The new approach may be applied to such developments to assess the potential of changes of direction and air flow rates. In addition, interpretation of the developed sensitivity indicator is presented. While analyzing air distributions for sublevel exploitation, application of current numerical models for calculations of the distribution results in tangible benefits, such as the evaluation of the safety or risk levels for such exploitation. Application of the VentGraph computer program, and particularly the module POŻAR (fire) with the newly developed options, enables an additional approach to the sensitivity indicator in evaluating air flow safety levels for the risks present during exploitation below the level of the intake shaft. The analyses performed and examples presented enabled useful conclusions in mining practice to be drawn.

Abstract: Cardiovascular Disease (CVD) is the most prevalent disease worldwide, which has been linked to work stress because of poor job design as explained by the Job Demand-Control (JDC) and the Effort-Reward Imbalance (ERI) models. In this paper we explore for the first time relative impact of a specific aspect of organisational climate, Psychosocial Safety Climate (PSC), on any CVD including angina, myocardial infarction, hypertension, and stroke. We used two waves of interview data from Australia, with an average lag of 5 years (excluding baseline CVD, final n = 1223). Logistic regression was conducted to estimate the prospective associations between PSC at baseline on incident CVD at follow-up. It was found that participants in low PSC environments were 59% more likely to develop new CVD than those in high PSC environments. Logistic regression showed that PSC at baseline predicts lower CVD risk at follow-up (OR = 0.98, 95% CI 0.96-1.00), and this risk remained unchanged even after joint adjustment for measures of ERI and JDC. These results suggest that PSC is an independent risk factor for CVD in Australia. Beyond job design this study implicates organisational climate and prevailing management values regarding worker psychological health as the genesis of CVD.

Blockchain is a data management innovation that allows the linkage of successive records regarding a digital entity, and to store them into a shared, decentralized, distributed and retroactively unchangeable data structure. Each bit of information related to the recorded events contains the public key of the owner, therefore, the whole record is formed by a chain of transactions with blocks of information identifying where the transaction was generated from and its current destination (Nakamoto, 2008). Blockchain is the technology behind Bitcoin, an online currency that was first introduced in 2009. The technology makes it possible to conduct business between members within the network without relying on third parties as guarantors to prove transaction integrity, thus increasing speed and reducing cost of transaction. Moreover, the transparency posed by the technology makes it possible to trace goods and services through all stages, making the technology a unique tool that can be assimilated by, for example, the Agro-food supply chain systems. Specifically, Blockchain is being tested in a pilot project in the UK meat (Beef) industry by the FSA (Food Standards Agency) and the slaughterhouses, with IBM Blockchain platform to ensure full transparency and compliance with regulations, (Evenstad, 2018). However, the uptake of Blockchain in the fresh produce (fresh and fresh, short-life processed fruit, vegetables, salads) supply chain is lagging, in the United Kingdom, and remains untested and limited to literature, models and specific case studies in the United States of America and France. The study aims at understanding how prepared stakeholders are in adopting Blockchain for their operations. An inductive qualitative method was employed through non-structured interviews with three companies and one consumer focus group. The interviews were guided by seven (7) open-ended questions, which were unstructured. The collected data was analyzed with axial coding through constant comparative methods. Seven (7) themes were identified as factors influencing the adoption of Blockchain in the fresh produce supply chain in the UK. These are, novelty of the technology, complexity of the fresh produce supply chain in UK, level of product transformation, technological compatibility with operations, cost and value, Customer (retailer) push for adoption, and public/consumers opinion. The adaptation of Blockchain by the current fresh produce supply chain in the UK and the EU at large will come about when concerns on Novelty, and complexity of supply chain systems are fully addressed.

Currently, SARS-CoV-2 infection which is the causative agent for COVID-19 disease is a worldwide pandemic with more than 100 million global cases and more than 2.0 million deaths (as of January, 2021). While several vaccines for prevention of COVID-19 have already been registered by the regulatory authorities, the problem is that the substitution rate of this virus is estimated to be one change per 2 weeks, thus mutations could arise that threaten the efficacy of vaccines. Unfortunately, there is no current evidence from random clinical trials to recommend any specific post-exposure treatment for patients with suspected or confirmed COVID-19 disease. Here we propose an innovative superinfection therapeutic (SIT) strategy, which could complement the development of prophylactic vaccines. SIT is based on clinical observations that unrelated harmless viruses might interact in patients infected with pathogenic virus. During SIT, the patient benefits from superinfection with an apathogenic double-stranded RNA (dsRNA) virus such as the infectious bursal disease virus (IBDV), which is a powerful activator of the interferon-dependent antiviral gene program. An attenuated vaccine strain of IBDV was already successfully administered to resolve acute and persistent infections induced by two completely different viruses, the hepatitis B (DNA) and C (RNA) viruses (HBV/HCV). The safety of orally administered acid-resistant IBDV strain R903/78 reverse engineered viral drug candidate was demonstrated in 10 stage IV cancer patients who exhausted all conventional therapy. Following repeated oral administration of the virus up to 10⁹ infectious units (IU)/ dose, only mild flu-like side effects were reported in some patients. Proof-of-principle efficacy was demonstrated in an early COVID-19 patient who was successfully treated with 3x10⁶ IU of an attenuated IBDV vaccine. A small scale dose-finding Phase I safety study is proposed.

As there is lack of understanding about the effect of transitioning between different flooring materials on the gait of older adults, this study investigated the effect of transitioning between a carpeted floor and a vinyl floor on the gait characteristics of older adults. Fourteen older (65 years old and over) and 14 younger (18 to 35 years old) adults walked on different transitional floors by measuring various gait parameters. While the older participants had greater toe clearance than their younger counterparts, the older participants had smaller toe clearance on a carpeted floor than on a vinyl floor, which would increase the probability of a trip-induced fall. Further, the study found the slower transitional acceleration of the whole body COM and the increased friction demand, especially during the toe-off phase, rather than heel contact phase, which will lead to a slip-induced fall on a vinyl floor shortly after transitioning from a carpeted floor to a vinyl floor. Although the increased likelihood of a slip or trip accident was found throughout the changes in gait parameters, the older participants did not perceive of slipping and tripping much. Therefore, older adults are recommended to be made aware of the danger of slipping and tripping while transitioning between different flooring materials.

Physical distancing and wearing a face mask are key interventions to prevent COVID-19. While this remains difficult to practice for millions of firefighters in fire engines responding to emergencies, the delayed forthcoming of evidence on the physical effectiveness of such safety interventions in this setting presents a major problem. In this field experimental study, we provided initial evidence to close this gap. We examined total aerosol burden in the cabin of a fire engine whilst manipulating crew size, natural ventilation, use of FFP2 respirators and use of SCBA full-face masks during 15-minute driving periods. At the same time, we controlled for crew activity and speaking, vehicle speed, cabin air temperature, pressure and humidity. Limiting the crew size, using FFP2 respirators and not donning SCBA full-face masks was associated with a reduction of the arithmetic mean of total aerosol burden of up to 49%. Natural ventilation as tested in this study was associated with both an increase and a decrease of total aerosol burden. This study provided initial evidence on the physical effectiveness of safety interventions in fire engines to reduce potential airborne transmission of SARS-CoV-2 through aerosols. More research about the physical and clinical effectiveness of such safety interventions is needed.

Background: Handover is a critical process for ensuring quality and safety in healthcare. Considerable research suggests that poor handover results in significant morbidity, mortality, dissatisfaction, and excess financial costs. Despite this, little formal attention, education, and evaluation has been given to handover. There is also paucity of data on the opinions of practitioners on the safety of handover.Objectives: The aim of this study was to measure the perceived risk, degree of patient harm and the systems used to support handover, and to understand how this varied by care setting, type of clinical practice, location, or level of experience. Methods: An open, anonymous and confidential online questionnaire covering: (a) respondent characteristics; (b) peer-to-peer handover; (c) internal referrals; (d) discharges and transfers between organisations; and (e) leading and improving handover was conducted with healthcare practitioners and managers from various settings. Results: We gathered a total of 432 completed responses from 26 countries. The average reported performance of handover was rated as 3.9 out of 5.For each type of handover, 12 - 14% reported errors occurring more than weekly. Of those that knew the outcome of such errors, between 29% and 34% reported that they had witnessed moderate or severe harm. 12% and 17% of respondents believed that handover was high or very high risk (See table 4). These respondents were more likely to have witnessed moderate or severe harm, or to be more senior.A wide combination of handover systems was utilised by respondents. 28% - 32% relied exclusively on EPRs (with or without face-to-face contact). 21% used Office documents such as Word and Excel for peer-to-peer handover, and over 30% used hand-written or manual systems. Conclusions: This study suggests the need to do more — and go further — to improve communication and reduce risk during all types of handovers. Clinical leaders should find ways to train and support handover with effective systems, with less experienced staff being the primary focus. More research is needed to demonstrate the interventions that improve the safety of handover.

Objectives: The purpose of this systematic review was to ascertain critical care nurses’ understanding and experiences of patient advocacy in adult critical care settings. The specific objectives were to identify how critical care nurses define patient advocacy, to explore the understanding and experiences of critical care nurses regarding patient advocacy, to explore critical care nurses’ role in patient advocacy, and to ascertain the barriers to encouraging advocacy in the critical care setting. Research design: Systematic literature search of CINAHL and Medline databases, Google Scholar, and Cochrane Database of Systematic Reviews, as well as grey literature search, was conducted. Search dates were restricted from January 2005 to 2015 in both CINAHL and Medline. Findings: 62 studies were identified, of which 6 qualitative research papers were included. Nurses gave varied definitions of patient advocacy, which were categorized into three themes: communication, protection, and doing. Nurses perceive advocacy as truly listening to patients and their families. Conclusion: For critical care nurses to be effective advocates, there must be support, collaboration, and improved working relationship between professional groups. Moreover, nurses must be empowered to be able to give power to patients and family.

The critical period (CP) phenomenon in language development ranks among the 125 conundrums facing scientists in the 21st century, according to Science. While the phenomenon itself has been noncontroversial in first language acquisition, it still warrants an adequate explanation. Predicated on language acquisition as a complex process, questions among the first to be raised include: How do children accomplish this remarkable feat in such a short amount of time? And how do nature and nurture come together to influence language learning? In second language acquisition, however, both the notion of CP, albeit popular, and its empirical evidence have remained contested to this date - among the questions, whether the observed evidence counts as CP-specific and/or whether or not it warrants an isomorphic attribution to maturational constraints. Entwined in this debate are two well-established facets of inter-learner differential attainment. The first is that there exists a stark difference in ultimate attainment between younger and older learners. A second facet is the vast differences in ultimate attainment among older learners. In this article, adopting a social physics approach, we mathematically establish both the relationship between nature and nurture contributions and the presence of a critical period, and, at once, tender a parsimonious and probable theory for the twin phenomena of inter-learner differential attainment.

(1) Background: A growing number of communities are re-discovering the value of their streets as important public spaces for many aspects of daily life, thus creating the need for a transformation in the quality of streets. An emerging concept is to accommodate all users of the transportation system, a concept that has been labelled ‘complete streets’. (2) Methods: In this paper, we present sustainable complete streets design criteria that integrate complete streets by adding in socio-environmental design criteria related to aesthetics, environment, liveability, and safety. (3) Results: Proposed design criteria provide a street network which provides improvements in aesthetics, to recover historical urban character and realize historical area planning goals; environment, to increase permeable surfaces, reduce the heat island, and absorb traffic-related air pollution; liveability, to create a public space destination in the urban landscape; and safety, to improve the safety of all road users. and (4) Conclusions: The case study of the urban rehabilitation of the “Mostra d’Oltremare” area and of its cultural and architectural assets in Naples, Italy, highlights the practical application of the proposed criteria and the possibility of using these criteria in other urban contexts.

The free energy principle states that self-organization occurs through minimization of free energy, which is a measure of potential thermodynamic work. By minimizing free energy, the organism happens to also minimize surprise over its boundary, promoting chances of survival. We discuss the ethical implications of the cognitive goal in detail from an empirical point of view, highlighting the principle of least action as a physical basis of Occam's razor, the universality of the free energy principle, and its explanation of natural selection. We explain that the free energy principle extends to groups of organisms and helps us understand group-scale adaptations and selection in biology. The free energy principle applies to all scales of organization in the organism from single cells to the entire nervous system. When this principle is taken to its logical extremes of modeling groups, populations and ecosystems, we uncover a new, evolutionarily sensible path at explaining puzzling aspects of human motivation and judgement, including ethical decisions. To minimize free energy, populations have to act to maximize gathering of information, while building effective models at mitigating changes to its dynamic structure. The free energy principle thus provides a naturalistic explanation of some of our deepest ethical intuitions, and valuable principles of social behavior. We interpret the cognitive goal that corresponds to the principle as seeking a dynamic, fruitful, yet peaceful activity that sustains the organism. This state of mind is interestingly similar to the Buddhist intuition of mental equanimity; the organism's final goal is to be at peace and harmony with the environment. Another immediately relevant aspect is that assemblies must form to promote symbiotic, synergistic, positive feedback loops, which coincides with the findings of ecologists. Therefore, ethics naturally emerges in self-organizing systems. Assemblies of organisms must ultimately unite in macro-minds to achieve the greatest reduction in free energy, as well as building technological extensions of themselves to improve their capacity to do such, therefore the principle also predicts a post-singularity world-mind composed mostly of artificial intelligence.

Safety and quality are key issues for the food industry. Consequently, there is a growing demand to preserve the food chain and products against substances toxic, harmful to human health such as contaminants, allergens, toxins, or pathogens. For this reason, it is mandatory to develop highly sensitive, reliable, rapid, and cost-effective sensing systems/devices such as electrochemical sensors/biosensors. Generally, conventional techniques are limited by long time of analyses, expensive and complex procedures, and they require skilled personnel. Therefore, the development of performant electrochemical biosensors can significantly support the screening of food chain and products. Here, we report some of the recent developments in this area and analyze the contributions produced by electrochemical biosensors in the food screening and the challenges to address.

A fatty hydroxamic acid (FHA) mixture synthesized from olive oil triacylglycerides by hydroxylaminolysis and composed predominantly of oleyl and linoleyl hydroxamic acid (OHA and LHA, respectively) was characterized by means of IR, Raman, MS and 1D and 2D ¹H- and ¹³C-NMR spectroscopy. The ratio of OHA and LHA (4:1) was confirmed by MALDI TOF/TOF mass spectrometry. The radical scavenging and the Fe²⁺-chelating activity, as well as antioxidant activity in β-carotene-linoleic acid and the Fe³⁺-reducing power assays of the FHAs yielded positive results. The results of FHA cell toxicity on normal fibroblast (BJ) and a tumour cell line (HeLa) revealed that the normal cell line was sensitive to FHAs within the entire range of applied concentrations (5 × 10⁻⁴ mg/mL to 5 × 10⁻¹ mg/mL), while the HeLa tumour cell line was sensitive only at the highest FHA concentration (5 × 10⁻¹ mg/mL). In silico target prediction indicated cannabinoid receptors 1 and 2, the fatty-acid amide hydrolase 1 and hystone deacetylases as the most probable targets of OHA and LHA. According to ADMET predictor analysis, the safety profiles of OHA and LHA are comparable to that of SAHA (vorinostat) the histone deacetylase inhibitor in use as an antineoplastic and immunomodulating agent.

Cobalt, like other critical elements, is gaining in importance today. The great technological advances and the deep knowledge of the physical and chemical properties of this element have allowed to enhance its applications in various fields, such as: catalysts, paints, alloys for the mechanical and aerospace industries, as well as the medical sector and in recent times, its use within the rechargeable battery industry. The main exploitable deposits are in the Democratic Republic of the Congo, which have economic potential due to a strong influence on their mineralization processes. However, the growing demand for cobalt and the search for less dependence on African deposits leads to targeting other regions, so it is necessary to carry out exhaustive exploration to find out the potential of its reserves for a subsequent benefit of the mineral. Generally, cobalt comes as a by-product of the extraction of other metallic minerals, mainly from Cu-Co, Ni-Co, Ni-Cu-Co deposits. From the above, a first review is carried out on the differences that exist in the geochemical, mineralogical and forecast properties that exist within the different deposits that harbor cobalt. As a second review topic, it delves into efficient processing for cobalt recovery, which is generally carried out by flotation, acid leaching, in addition to its recovery from secondary sources, such as batteries and metallurgical waste. However, generally speaking there is still a vast lack of fundamental knowledge about the processability of cobalt. Said processing has been affected from the point of view of mineralogy, that is, understanding and knowing the cobalt-bearing minerals, as well as gangue mineralogy, these aspects exercise significant control during their processing and selection of the most appropriate route. suitable for cobalt extraction (leaching and/or flotation). In this context, the document concludes with a vision of the challenges that the mining industry must implement to enter circular economy models, mainly in the creation of sustainable processes from secondary sources.

Background: It is necessary to apply a behavior-based safety (BBS) program to prevent at-risk behavior. An effective BBS program requires the implementation of not only behavioral definitions and a customized critical behavior checklist (CBC) but also observations of behavior, coupled with customized interventions at power plants. Method: In this study, a customized CBC and behavioral definition were developed through a review of five different sites that previously used a CBC. The rules of observation, flow, and target were established to initiate the observations. Customized interventions were selected to increase safe behaviors. CBC scoring was used to evaluate observed safe behaviors for three years. Recognized safe behaviors were evaluated with a questionnaire that included four items each for conformity and participation behaviors and were then analyzed through a factor analysis and a t-test. The questionnaires were conducted three months before and after the implementation of the BBS program. Results: The customized CBC, behavioral definition, and interventions were effective, such that observed safe behaviors and the levels of workers’ recognized safe behaviors increased. Conclusion: The application of the BBS program was found to increase the observed and recognized safe behaviors. Therefore, the program applied to this site can help increase safe behaviors at other identical or similar sites, as well as prevent an accident, which also corresponds with the results of prior studies.

The formal transfer of GNSS under water is not possible. It probably makes sense to talk only about the transformation of GPS into LPS, that is, in the Local Position System. However, the basic methods that are used to solve the problem of Spoofing Detection above water can be used under water. It should be understood that engineering problems are significantly different, since the nature of the propagation of acoustic waves in water and electromagnetic waves in the atmosphere are fundamentally different. In this article, we will limit the navigation with acoustically passive receiver. The receiver “listens” to the buoys and solves the problem of finding its own position based on the coordinates of the buoys (such systems are called GNSS-like Underwater Positioning Systems or GNSS-like UPS). Depending on the scale of system service areas, GNSS-like UPS are divided into global, regional, zonal and local system. In this article, we will limit ourselves to considering only local GNSS-like UPS. The acoustic signal generator transmits a signal simulation of several satellites. If the level of the simulated signal exceeds the signal strength of real satellites, the receiver of UPS will “capture” the fake signal and calculate the false position based on it.

Purpose: There is limited research on the reasons behind startup failure, and none of the available studies use a competency approach. In this study we applied Spencer’s competency model to identify the competencies in startups which, according to their CEOs, contributed to failure. Methodology: Three coders analyzed the stories of 50 startup failures published online using modified Critical Incident Technique. Findings: Two salient competencies were identified playing a fundamental role in startup failures if missing: Information seeking and Customer service orientation. A network pattern of 9 more prevalent competency deficits was created: Technical/professional/managerial expertise, Analytical thinking, Flexibility, Self-control, Concern for order, quality and accuracy, Interpersonal understanding, Self-confidence, Team leadership and Teamwork and cooperation. Besides startup-specific behavior descriptions were added to Spencer’s competencies. Research implications: Competency approach and Critical Incident Technique method proved to be feasible to identify competency deficits in failed startups. Practical implications: The identified competency deficits offer relevant focus areas for the assessment and development of startup teams. Originality: The study provided research evidence to describe the competency deficits of startup teams that are connected to their failure.

Students with disabilities are often framed as “the problem” and have limited opportunities to engage in standards based mathematics, leading to persistent underachievement. In this paper, we investigate a research divide between mathematics educational research for students with and without disabilities, a divide with significant differences in the theoretical orientations and research methodologies used to understand learners. Based on an analysis of 149 mathematics educational research articles published between 2013 and 2015, we found significant differences between articles focused on learners with and without disabilities. For those with disabilities, mathematical problem solving was understood primarily from behavioral and information processing theoretical perspectives, while for those without disabilities, problem solving was understood primarily through constructivist and sociocultural perspectives. While 86% of research on problem-solving including students with disabilities was quantitative, only 35% of research on students without disabilities was quantitative. Fifty percent of problem-solving research on students without disabilities was qualitative, compared to only 6% of research on students with disabilities. Problem solving, then, is studied in very different ways for learners with and without disabilities. Students without disabilities are studied through close analysis of learning, often individual. Students with disabilities are most often studied quantitatively, in groups, with little analysis of individual thinking. By offering only a limited range of methods and theoretical orientations, this research divide reifies deficit constructions of students with disabilities.

As is known, the construction industry has one of the highest occupational accidents incidence rates among all economic sectors. Currently, Building Information Modeling (BIM) appears as a tool that addresses occupational safety issues throughout the construction life cycle projects, avoiding hazards and risks and, consequently, increasing safety. This work investigates BIM methodology and related technologies application for building safety planning in construction and demonstrates the potential of this technology for the integrated implementation of safety measures during the design phase and the construction site management. The first step consisted of a literature review on the application of BIM in safety in the design and planning phases. Following, to show the potentialities of construction simulation, a case study based on BIM 4D to prevent falls from height was developed. With BIM 4D, it is possible to follow the construction process over time, giving the construction safety technicians’, designers, supervisors and managers the capability to analyse, in each phase, the potential risks and which safety measures should be implemented. BIM can effectively integrate safety measures from the design phase to the construction and use phase and do integrated safety planning within construction planning, leading to reliable safety management throughout the construction process.

Misuse and poor handling of chemical pesticides in agriculture is hazardous to the health of farmers, consumers and the environment. We studied the pest and disease management practices and the type of pesticides used in four root, tuber and banana (RTB) crops in Burundi and Rwanda through in-depth interviews with a total of 811 smallholder farmers. No chemical pesticides were used in banana in either Rwanda and Burundi, whereas the use of insecticides and fungicides in potato is quite frequent. Nearly all insecticides and about one third of the fungicides used are moderately hazardous. Personal protective equipment is used by less than a half of the interviewed farmers in both countries. Reported cases of death due to self- or accidental poisoning among humans and domestic animals in the previous 12 months were substantial in both countries. Training of farmers and agrochemical retailers in safe use of pesticide and handling, and use of integrated pest management approaches to reduce pest and disease damage is recommended.

The capability to avoid other air traffic is a fundamental component of the layered conflict management system to ensure safe and efficient operations in the National Airspace System. The evaluation of systems designed to mitigate the risk of midair collisions of manned aircraft are based on large-scale modeling and simulation efforts and a quantitative volume defined as a near midair collision (NMAC). Since midair collisions are difficult to observe in simulation and are inherently rare events, basing evaluations on NMAC enables a more robust statistical analysis. However, an NMAC and its underlying assumptions for assessing close encounters with manned aircraft do not adequately consider the different characteristics of smaller UAS-only encounters. The primary contribution of this paper is to explore quantitative criteria to use when simulating two or more smaller UASs in sufficiently close proximity that a midair collision might reasonably occur and without any mitigations to reduce the likelihood of a midair collision. The criteria assumes a historically motivated upper bound for the collision likelihood and subsequently identify the smallest possible NMAC analogs. We also demonstrate the NMAC analogs can be used to support modeling and simulation activities.

Increasing rates of infection by antibiotic resistant bacteria have led to a resurgence of interest in bacteriophage (phage) therapy. Several phage therapy studies in animals and humans have been completed over the last two decades. We conducted a systematic review of safety and toxicity data associated with phage therapy in both animals and humans reported in English-language publications from 2008 – 2021. Overall, 69 publications met our eligibility criteria including 20 animal studies, 35 clinical case reports or case series, and 14 clinical trials. After summarizing safety and toxicity data from these publications, we discuss potential approaches to optimizing safety and toxicity monitoring with the therapeutic use of phage moving forward. In our systematic review of the literature, we found few, but no serious, adverse events associated with phage therapy. Comprehensive and standardized reporting of potential toxicities associated with phage therapy has generally been lacking in the published literature. Structured safety and tolerability endpoints are necessary when phages are administered as anti-infective therapeutics.

This paper studied the nonlinear vibrations of top tensioned cantilevered pipes conveying pressurized steady two-phase flow under thermal loading. The coupled axial and transverse governing partial differential equations of motion of the system were derived based on Hamilton’s mechanics with the centreline assumed to be extensible. Multiple scale perturbation method was used to resolve the governing equations, which resulted to an analytical approach for assessing the natural frequency, mode shape and the nonlinear coupled axial and transverse steady state response of the pipe. The analytical assessment reveals that at some frequencies the system is uncoupled, while at some frequencies a 1:2 coupling exists between the axial and the transverse frequencies of the pipe. Nonlinear frequencies versus the amplitude displacement of the cantilever pipe conveying two-phase flow at super critical mixture velocity for the uncoupled scenario exhibit a nonlinear hardening behaviour, an increment in the void fractions of the two-phase flow resulted to a reduction in the pipe’s transverse vibration frequencies and the coupled amplitude of the system. However, increasing the temperature difference, pressure and the presence of top tension were observed to increase the pipe’s transverse vibration frequencies without a significant change in the coupled amplitude of the system.

The study presents a comparison of the common Child Restraint Systems (CRS) which reduces the value of dynamic loads affecting the child's body during car accidents. The analyzed systems were: child seats, Combi Booster Seats, and straps adjusting vehicle seat belts to children's sizes. The effectiveness of the analyzed devices was assessed on the basis of experimental tests carried out in the accredited laboratory approving the Child Restraint Systems. The tests were carried out accordingly to the new Regulation No. 129 UN / ECE. Whether the tested devices meet the guidelines of the new Regulations No. 129 despite approval in accordance with Regulation No. 44. Based on the research result, better safety parameters of some new solutions dedicated to children's safety could be observed. The final results show that there is still space for improving the safety of young vehicle passengers.

Roundabouts need capacity and safety improvements compatible with manual-driven, not only with autonomous vehicles. The signaling and control of roundabouts must evolve and incorporate current technologies. For that, we approach roundabouts as synchronous switches of vehicles. This paper describes Synchronous Roundabouts with Rotating Priorities, a roundabout control system based on vehicle platoons arriving at the roundabout at speed identical to the roundabout and within the time slot assigned to their entry, avoiding conflicts and stops, thus increasing roundabout capacity and safety. Signaling is visual for human drivers and also wireless for connected and autonomous vehicles. We evaluate analytically and with simulations roundabouts of different radius for several values of the average distance between vehicles. Average delays are 28,7 % lower, with negligible dispersion. The capacity improvements depend on design parameters: in our set is moderate for small roundabouts but goes up to 70-100 % for short distances and medium and large roundabouts.

Artisanal cheeses made with raw milk are highly appreciated products in Brazil. Most of these cheeses are produced in small properties across different production regions in the country, many of which have been granted a protected designation of origin. The most prominent state that manufactures these products is Minas Gerais, but production is also gaining strength in other Brazilian states. This text presents an overview of the many types of artisanal cheeses produced in the country, grouped by geographical regions, and reviews the current challenges faced by producers and government considering the safety of these cheeses.

The potential for transmission of the SARS-CoV-2 virus during minimally invasive gynaecological procedures, such as hysteroscopy or laparoscopy, on the reproductive tract of patients with COVID-19 is not known. We examined existing data for prevalence of virus in the reproductive tract and other bodily fluids.

Planning, development and design policies influence sense of safety of people touse the City centre or Central Business District (CBD) and therefore city centres can becomeactive and vibrant during the day and night. This paper reviews past and present planningpolicies relevant for feeling of personal safety in the context of housing, retail, amenities,street infrastructure, building design and transportation aspects. The past development trendsshow that insignificant attention has been paid to people's sense of safety when using publicspaces, particularly at night, a factor identified important in creating attractive city centressince 1960s. Local plans primarily refer to safety in relation to roads, accessibility andworkability. Local policies also show the dominance of CCTV since the 1990s has becomeubiquitous, but changes to sense of safety in urban spaces now may actually be a betterreflection of planning and design decisions made over the past 20 years.

The paper aims in assessing risks of mandible fractures consequent to impacts or sport accidents. The role of the structural stiffness of mandible, related to disocclusion state, is evaluated through numerical simulations using the finite element method (FEM). It has been assumed that the quasi-static stress field, due to distributed forces developed during accidents, could explain the common types of mandibular fractures. Geometric model of adolescent mandible was built, upon the basis of medical imaging, in CAD software with distinction between cortical layer and inner spongy bone. The finite element model of disoccluded mandible was next created. Mandibular condyles were supposed jammed in the maxillary fossae. The total force of 700 N, simulating an impact on mandible, has been sequentially applied in three distinct areas: centrally, at canine zone and at the mandibular angle. Clinically most frequent fractures of mandible were recognized through the analysis of maximal principal stress and maximal principal strain fields. Mandibular fracture during accidents can be analyzed at satisfactory level using linear quasi-static FE models for designing protections in sport and transport. The proposed approach can be improved by introducing more realistic interactions between condylar processes and fossae.

Pharmacovigilance databases are showing evidence of injury in the context of the COVID-19 modified mRNA shots. According to recent publications, adverse event reports linked to the mRNA COVID-19 products largely point to the spike protein as an aetiological agent of adverse events, but we propose that the platform itself may be culpable. To assess the safety of current and future mRNA vaccines, further analysis on the risks due to the platform itself, and not specifically the expressed antigen. If harm can be exclusively and conclusively attributed to the spike protein, then it is possible that future mRNA vaccines expressing other antigens will be safe. If harms are attributable to the platform itself, then regardless of the toxicity, or lack thereof, of the chosen payload therein, the platform may be inherently unsafe, pending modification. In this work, we examine previous studies of RNA-based delivery by a lipid nanoparticle and break down the possible etiological elements of harm.

Aim: Shockwaves have been felt all over the world as a result of war, inflation, food shortages, and the COVID-19 pandemic's long tail. The aim of the study is to correlate present global conflicts, pandemic and socio-economic crises with present healthcare sustainability, identifying possible threats and visualize future global health crises if all these catastrophes persist for long. Materials and Methods: PubMed, ALTAVISTA, Embase, Scopus, Web of Science, and the Cochrane Central Registers were prioritized to collect public health issues. Results: The global economic slowdown, sharp decline in financial asset values, decline in imports and exports, contraction of industrial production, rise in inflation, decrease in wages, rise in unemployment, damage to the social security caused by numerous natural calamities, human displacement due to pandemic and ongoing conflicts tear down not only the economic sector but also the health sector. It is already late for taking corrective measure by the participation every country, community or intelligence. Only healthcare issues, highlighted in this study, if focused in the highest platforms, could compel global leaders to forego conflicts and work together. Conclusion: The global health sector will be collapsed soon, if proper initiatives are not taken right now, which has already been grossly mistreated by the pandemic.

The construction industry is one of the most fatal industries, so it is important to pay more attention to safety solutions. Even though work-related accidents are known as major waste in construction projects, little attention has been paid so far to incorporating safety into the lean construction framework. In this research, lean construction theory is reviewed through the lens of safety. That being so, the identified challenges in previous research on improving safety in construction projects are categorized and those related to the concept of lean project delivery are introduced. Then, the principles of the lean construction framework are explained and the relevant changes for incorporating safety into the framework are introduced and discussed. It is expected that this hybrid model would further enrich the lean construction framework. The careful attention of project executives to this model may improve the safety situation in construction projects.

Introduction.Sars-CoV-2 infection poses particular problems in pregnancy, as the infection more frequently causes severe complications than in unaffected pregnant women, or non-pregnant women with SARS-CoV-2 infection. Now that vaccination is available and rapidly getting implemented worldwide, the question arises whether pregnant women should be vaccinated, and if so, whether they should get priority. Methods. Available scientific data and available guidelines about vaccination against SARS-CoV-2 were collected by the Guideline Committee of the International Society of Infectious Diseases in Obstetrics and Gynecology (ISIDOG), and were analyzed, discussed and summarized as guidelines for health care workers caring for pregnant women. Concluding statements were graded according to the Oxford Evidence Based Medicine Grading System. Results. There is evidence to consider pregnancy as a risk factor for serious complications of COVID-19 infection, even in the absence of additional risk factors, such as hypertension, diabetes and obesity which increase these risks even more in pregnancy. Currently available data slightly favor mRNA-based vaccines above vector-based vaccines during pregnancy and breastfeeding, until more safety data become available. Conclusion. ISIDOG advices policy makers and societies to prioritize pregnant women to receive vaccination against SARS-CoV-2, and favor the mRNA vaccines until further safety information becomes available.

Organizations can play a significant role in the advancement of Sustainable Development, and companies with Quality, Environmental and Occupational Health and Safety (QEOHS) certified management systems address the three Sustainability Dimensions (economic, environmental and social). This research aims to map the present level of engagement of those companies in contributing and reporting to the 17 Sustainable Development Goals of The United Nations 2030 Agenda. The content of companies reports (available in web sites, by 31 December 2017) of a total of 235 Portuguese organizations with QEOHS certified management systems, was analyzed. The results show a moderate reporting of SDGs by those companies, with the top five being SDG 12 - Responsible consumption and production (23.8%), SDG 13 – Climate action (22.1%), SDG 09 - Industry, innovation, and infrastructure (21.3%), SDG 08 - Decent work and economic growth (20.0%) and SDG 17 - Partnerships for the goals (19.6%). The results of the statistical tests indicate that the communication of SDGs is more prominent in organizations (QEOHS) with higher business volume, that are members of the United Nations Global Compact Network Portugal, and that disclose their sustainability reports on their web site. This study can be useful for decision-makers that aim to support organizations to contribute to the Sustainable Development Goals.

A large variety of fermentation products are used in food and feed production, but also in other industries, and many of these products are produced with genetically modified microorganisms (GMMs). In food and feed production, prominent examples are amino acids, vitamins, food and feed enzymes, colorants, non-caloric sweeteners and human milk oligosaccharides. From a regulatory perspective, fermentation products are typically produced under containment. This means that premises, equipment and work processes need to be designed to prevent or at least minimize release of GMMs into the environment. The fermentation products themselves should not contain any live cells of the GMM. Over the past years, there have been concerning developments, particularly in the European Union, stipulating that also absence of recombinant DNA might be interpreted as a regulatory requirement for fermentation products produced with GMMs. In this paper, we (i) attempt to place these developments into the historical context, (ii) sketch the potential negative repercussions for the food and feed industries, (iii) elaborate on the safety of recombinant DNA, and (iv) postulate that recombinant DNA should remain an integral part of the safety assessment of fermentation products but should not be misconstrued as a criterion for regulatory classification of products of biotechnology.

An internationally acknowledged requirement is to analyze and provide technical solutions for prevention and safety during use and maintenance of manure spreader wagons. Injuries statistics data and specific studies show that particular constructive criticalities have been identified on these machines, which are the cause of serious and often fatal accidents. These accidents particularly occur during the washing and maintenance phases, especially when such practices are carried out inside the hopper when the working bodies of the machine are in action. The current technical standards and the various safety requirements under consideration have not always been effective for protecting workers. To this end, the use of SWOT analysis allowed to highlight critical and positive aspects of the different solutions studied for reducing the risk due to contact with the working bodies. The selected and tested solution consists in a decoupling system automatically activated when the wheels of the wagon are not moving. Such a solution prevents the contact with the moving working bodies of the machine when the worker is inside the hopper. This mechatronic solution allowed to obtain a prototype that has led to the resolution of the issues related to the use of the wagon itself: in fact the system guarantees the stopping of manure spreading organs in about 12 seconds from the moment of the wheels stopping.

In recent years, the consumption of over-the-counter probiotics used to promote health has grown rapidly worldwide and become an industry. In medicine, various studies have proven that probiotics can help improve the immune system and intestinal health. They are usually safe, but in some rare cases, they may cause concerning adverse reactions. Although the use of probiotics has been widely popularized in the public, the results of many probiotics clinical trials are contradictory. Especially for the cancer patients, the feasibility of probiotics management to provide benefits by targeting cancer and lessening anti-cancer side effects requires further investigations. And this review summarizes the interactions between probiotics and the host and current pros and cons of applying probiotics in the cancer patients.

Purpose: "Just culture" is an element of safety culture, and in a broader sense – a part of quality culture. It is the subject of studies, especially in healthcare. This phenomenon is almost unknown in Polish medical facilities. For this reason, the aim of the article is to present the essence and significance of "just culture" in healthcare. The other aim of the research is to present the results of the validation of "just culture" assessment instrument used to recognize the "just culture" maturity level and evaluate the nurses’ beliefs and behaviours in the light of "just culture" criteria. Methodology/Approach: The verified questionnaire consisted of 28 statements in relation to which respondents expressed their opinion on a 5-point Likert scale. The questionnaire was distributed among nurses in one of the largest hospitals in Pomorskie Voivodeship, in Poland. The results based on 68 responses were statistically processed with Statistica 13.1 software. Findings: The obtained results allowed to confirm the reliability of the assessment tool, to recognize the level of „just culture” as wisdom (68%) and to indicate strengths and weaknesses of observed beliefs and behaviours. On this basis, improvement actions were proposed. Originality/Value: We use the original, own prepared questionnaire. This is the first study on "just culture" in healthcare in Poland. There are only few studies devoted to patient safety culture in Poland and no research addressed to "just culture" phenomenon, as well in Poland as in Central Europe. The results in this area allow to recommend the assessment tool for other hospitals and seem to help in understanding the essence of "just culture" implementation.

Owing to the reduction of rupture instability and the avoidance of wrinkle defect, hydrodynamic deep drawing (HDD) process is gradually becoming attractive for fabricating lightweight and complicated products. Meanwhile, since metallic material presents anisotropic deformation behavior, it is necessary to select an appropriate constitutive model for the prediction of plastic deformation behavior of applied material with high precision. In the present research, several anisotropic yield criteria namely, Hill’48, Yld2000-2d and BBC2005 are implemented to investigate the effect of yield functions on the prediction accuracy of the critical process window and deformation behavior for HDD process of 2024 and 5754 aluminum alloys. Material constants in the yield criteria are determined by applying uniaxial and equi-biaxial tension tests and optimizing an error-function by using the Levenberg-Marquardt algorithm. Furthermore, the process window diagram is computed utilizing the stress analytical model combined material properties with workpiece geometrical features. Numerical simulation results of predicted material anisotropic parameters, process window and HDD deformation for aluminum alloys are compared with the experimental data. Through the comparison of diverse yield criteria based on materials anisotropic coefficients, critical process window prediction, earing profile, and thickness distribution, it is revealed that the Yld2000-2d and the BBC2005 yield criteria can offer more precise models of material behavior in planar anisotropy properties for HDD process of 2024 and 5754 aluminum alloys.

innate and adaptive immune responses lead to wound healing by regulating a complex series of events promoting cellular cross-talk. An inflammatory response is presented with its characteristic clinical symptoms: heat, pain, redness, and swelling. Some smart thermo-responsive polymers like chitosan can be used to create biocompatible and biodegradable scaffolds with 3D architectures similar to human structures, allowing their efficient and safe use as tissue engineering and drug delivery systems in chronic wounds. Locally heated tumors above polymer lower critical solution temperature can induce its conversion into a hydrophobic form, enhancing drug release until the thermal stimulus is gone, where a lower release is due to the swelling of the material. This paper integrates the relevant reported contributions of bioengineered scaffolds for thermo-responsive drug delivery in wound healing. Therefore, we present a comprehensive review that aims to demonstrate the capacity of these systems to provide spatially and temporally controlled release strategies for one or more drugs used in wound healing. In this sense, the novel manufacturing techniques of 3D-printing and electrospinning are explored for the tuning of their physicochemical properties to adjust therapies according to the patient’s convenience, as well as reduce drug toxicity and side effects.

History learning is often regarded as something that is considered unimportant and boring to be taught in the modern era like now. The existence of history learning itself is still important enough to be studied in the 21st century with all its benefits and uses. One of the uses of history is as a reasoning education. The research questions are how do we take advantage of history learning as reasoning and critical thinking education in the 21st century and how the usage of new media can make historical learning looks more interesting. The method used in this article is literature review with data obtained and analyzed from several journals and research results related to history learning and reasoning education, especially forms of critical thinking in the 21st century. From the results of the research, it was found that there was a link between learning history and its relation as a form of critical thinking in the 21st century, in several ways, such as teaching history based on historical thinking, and the usage of new media in history learning.

The intensive care units in North West London are part of one of the oldest critical carenetworks in the UK, forming a mature and established strategic alliance to shareresources, experience and knowledge for the benefit of its patients. North WestLondon saw an early surge in COVID-19 admissions, which urgently threatened thecapacity of some of its intensive care units even before the UK government announcedlockdown. The pre-existing relationships and culture within the network allowed itsmembers to unite and work rapidly to develop agile and innovative solutions, protectingany individual unit from becoming overwhelmed, and ultimately protecting its patients.Within a short 50-day period 223 patients were transferred within the network todistribute pressures. This unprecedented number of critical care transfers, combinedwith the creation of extra capacity and new pathways, allowed the region to continue tooffer timely and unrationed access to critical care for all patients who would benefitfrom admission. This extraordinary response is a testament to the power and benefitsof a regionally networked approach to critical care, and the lessons learned maybenefit other healthcare providers, managers and policy makers, especially in regionscurrently facing new outbreaks of COVID-19.

The world is facing an unprecedented socio-economic crisis caused by the novel coronavirus infection (COVID-19). It is also spreading through the import and export food supply chains. The Chinese authorities have discovered the COVID-19 virus in various imported frozen meat packages. Traceability plays a vital role in food quality and food safety. The Internet of Things (IoT) provides solutions to keep an eye on environmental conditions, product quality, and product traceability. These solutions are traditionally based on the centralized architecture, which does not guarantee tamper-proof data sharing. The blockchain is an emerging technology that provides tamper-proof data sharing in real-time. This article presents Hyperledger Fabric-based blockchain use case and a quick reference guide to develop the blockchain network for tracking and tracing the supply chain to minimize the risk of COVID-19 in the frozen meat supply chain.

There are numerous yeast species related to wine making, particularly non-Saccharomyces, that deserve special attention due to the great potential they have when it comes to making certain changes in the composition of the wine. Among them, Schizosaccharomyces pombe stands out for its particular metabolism that gives it certain abilities such as regulating the acidity of wine through maloalcoholic fermentation. In addition, this species is characterized by favouring the formation of stable pigments in the wine and releasing large quantities of polysaccharides during ageing on lees. Moreover, its urease activity and its competition for malic acid with lactic acid bacteria make it a safety tool by limiting the formation of ethyl carbamate and biogenic amines in wine. However, it also has certain disadvantages such as its low fermentation speed or the development of undesirable flavours and aromas. In this chapter, the main oenological uses of Schizosaccharomyces pombe that have been proposed in the last years will be reviewed and discussed.

Safety and health issues are growing concerns in the agricultural sector among farm-workers in South Africa. The current health pandemic arising from the corona virus has thrown these issues into the spotlight, and this study explored the perceived usefulness and perceived ease of using personal protective materials among farm-workers in the banana sector. Using a case study of 10 large farms in the lower south coast of South Africa, we utilized descriptive and inferential analysis to identify the demographic composition of farm-workers in the study area, examine their perception of specific personal protective materials, and determine the relationship between demographic characteristics and perception of personal protective materials. Farm-workers in the study area were found to be predominantly single black males aged between 36-55years, with no more than a primary education, with work experience of between 6-10 years and employed as unskilled farm-labourers. Perceived usefulness (83%) and perceived ease of use (79%) for personal protective materials was high. Respondents gender (p=0.012), marital status (p=0.029), level of education (p=0.035) and farm-work experience (p=0.008) were significant, while their age (p=0.057), population group (p=0.160) and work classification (p=0.203) were not found significant in determining perceived usefulness or perceived ease of use. Our study makes valuable contribution to the existing body of knowledge regarding farm-worker safety issues by exploring perception of personal protective materials.

Due to the upward trend in the globalization of sustainability issues and the intense competitive environment, it is evident that higher education institutions need new strategic approaches to succeed. To this end, the inquiry for this paper has been made into the debate about student relationship management. Going through the literature indicates that institutions have mainly perceived the concept as a technological initiative for solving the problems in individual domains, accompanied by uncoordinated efforts. Thus, the aims of this study are to theoretically present critical success factors of this strategic approach and to empirically examine the recognized factors. To do so, confirmatory factor analysis that is a quantitative analytic method was performed. The results and analyses revealed that there has been a significant correlation between the four critical success factors including knowledge management, student relationship management technology, student orientation, and employees’ involvement. It was also found that these factors are significantly correlated with the construct of student relationship management success. The findings have consequently highlighted that in addition to the technological tool, the role of knowledge management, employees’ involvement, and student orientation appeared to be particularly important for the implementation of the application.

Accidents and mishaps in industrial environments like construction, mining, and transport are rampant - mainly due to human negligence and improper monitoring of the workplace. In this paper, we address the safety of workers operating in dangerous environments by improving their situational awareness. According to Occupational health and safety rules, everyone must wear hard hats while on site. Our main idea is to make the hard hats smart by incorporating miniature-sized Doppler radars sensing the users’ surroundings. These Doppler radars are lightweight, rugged, and consume low-power compared to vision-based solutions. This paper discusses the observability of range from Doppler frequency measurements and the magnitude of estimation errors introduced by the human head, walking, and working motions. We present the framework to estimate the position of walls and targets surrounding the worker. For testing, we simulated an indoor environment with randomly moving workers. Experiments showed that once observability conditions are met, human head and walking movements can be handled through added noise in the system. We also present an innovative idea of using two Doppler radars to obtain the estimators’ initial estimates, reducing the estimation error to less than 5cm and convergence time by more than 80

Part of philosophy is to subject assertions to critical scrutiny, clarifying exactly what the assertion is saying, its implications, and thus its direct plausibility. The goal is to ensure clarity, logical consistency, and rational argumentation in order to arrive at reasoned conclusions. A common problem is that arguments have missing implied premises that, unless explicitly stated, are mistakenly assumed to be true. Here we subject conclusions made regarding the SARS-CoV-2 pandemic to critical scrutiny, revealing their implied premises so that these premises can be explicitly examined and refuted. Specifically, we refute the conclusions that “no one is protected until everyone is protected” and “population lockdowns are required to protect those at high risk of adverse outcomes.” In the end, we argue for the conclusion that “an Emergency Management principles based response to the pandemic, compared to population-wide lockdowns, offers a way to prevent more adverse outcomes from COVID-19, better prevent overwhelmed healthcare, and prevent most of the collateral damage to the wellbeing of the population that has resulted from the lockdowns.”

Chitosan is a biopolymer derived from chitin. It is a non-toxic, biocompatible, bioactive, and biodegradable polymer. Due to its properties, chitosan has found applications in several and different fields such as agriculture, food industry, medicine, paper fabrication, textile industry, and water treatment. In addition to these properties, chitosan has a good film-forming ability which allows it to be widely used for the development of sensors and biosensors. This review is focused on the use of chitosan for the formulation of electrochemical chemosensors. It also aims to provide an overview of the advantages of using chitosan as an immobilization platform for biomolecules by highlighting its applications in electrochemical biosensors. Finally, applications of electro-chemical chitosan-based chemosensors and biosensors in food safety are illustrated

Recently, it was reported that the physical cross-linking exhibited by some biopolymers could provide multiple benefits to biomedical applications. In particular, grafting thermoresponsive polymers onto biopolymers may enhance the degradability or offer other features, as ther-mothickening behavior. Thus, different interactions will affect the different hydrogen bonds and interactions from the physical cross-linking of CMC, the lower critical solution temperatures (LCSTs), and the presence of the ions. This work focuses on the study of blends composed of poly(N-isopropylacrylamide), poly(N-ethylacrylamide), and carboxymethyl cellulose in water and water/methanol. The molecular features, the thermoresponsive behavior, and gelation phenomena are deeply studied. The ratio defined by both homopolymers will alter the final properties and the gelation of the final structures, showing that the presence of the hydrophilic groups modifies the number and contributions of the diverse hydrogen bonds.

"The wisdom of crowd'' is so often observed in social discourses and activities around us. The manifestations of it are, however, so intrinsically embedded and behaviorally accepted that an elaboration of a social phenomenon evidencing such wisdom is often cheered as a discovery; or at least an astonishing fact. One such scenario is explored here, namely conceptualization and modeling of a food safety system, a system directly related to social cognition. Food safety is an area of concern these days. Models representing the food safety systems are recently published to study the effect of interactions between important entities of the system. For example, Knowles’s model finds conditions leading to a more efficient and dependable system of entities like consumers, regulators and stores with specific focus on regulators behavior and their impact on the food safety. The first contribution of this paper is reevaluation of Knowles’s model towards a more conscious understanding of ``the wisdom of crowd'' effects on inspection and consuming behaviors. The second contribution is augmenting of the model with social networking capabilities, which acts as a medium to spread information about stores and help consumers find stores which are not contaminated. Simulation results reveal that stores’ respecting social cognition improve effectiveness of the food safety system for consumers and stores both. Simulation findings also reveals that an active society has a capability to self-organize effectively even in the absence of any regulatory compulsion.

Technological advances such as blockchain, artificial intelligence, big data, social media, geographic information systems represent a building block of the digital transformation that supports the resilience of the food supply chain (FSC) and increases its efficiency. This paper reviews the literature surrounding digitalization in FSCs. A bibliometric and key-route main path analysis was carried out to objectively and analytically uncover the knowledge development in digitalization within the context of sustainable FSCs. The research began with the selection of 2140 articles published nearly over five decades. Then, the articles were examined according to several bibliometric metrics such as year of publication, countries, institutions, sources, authors, and keywords frequency. A keyword co-occurrence network was generated to cluster the relevant literature. Findings of the review and bibliometric analysis indicate that research at the intersection of technology and the FSC has gained substantial interest from scholars. On the basis of keyword co-occurrence network, the literature is focused on the role of information communication technology for agriculture and food security, food waste and circular economy, and the merge of the Internet of Things and blockchain in the FSC. The analysis of the key-route main path uncovers three critical periods marking the development of technology-enabled FSCs. The study offers scholars a better understanding of digitalization within the agri-food industry and the current knowledge gaps for future research. Practitioners may find the review useful to remain ahead of the latest discussions of technology-enabled FSCs. To the authors’ best knowledge, the current study is one of the few endeavors to explore technology-enabled FSCs using a comprehensive sample of journals articles published during the past five decades.

Today project management in every field of life is prerequisite for the success of project by increasing quality reduces cost and schedule. But selecting tools and techniques to achieve our objectives and implement our plan fully is very difficult task because choice creates complexity. So, we discuss AHP to make decision simple. Ranking critical success factor, cloud computing services, risk prioritization, selection of right ETL software and many other systems AHP plays its important role. For the improvement of today’s complex systems it is very important to prioritize and select projects to remove the root cause of the problem. To attain the right selection of construction equipment for carrying out schedule tasks with high efficiency, production and financial capability is the main purpose of procurement of construction equipment process. Certain conflicts can occur due to the construction of UML models in a collaborative way. AHP is used to remove these conflicts and for establishing and evaluating modelers judgments. Nowadays it is very important and critical decision to choose the best option from multiple alternatives for a successful career after passing 12th standard and also it affects our future. “AHP and TOPSIS” methods are used for this purpose. In this paper, an “AHP and Fuzzy AHP” based hierarchical trust model has been used to rate the service providers and their various plans for infrastructure as a service.

The increasing number of registered road crashes involving cyclists during the last decade, and the high proportion of road crashes resulting in severe injuries and fatalities among cyclists constitutes a global issue for community health, urban development, and sustainability. Nowadays, the incidence of many risk factors for road crashes of cyclists remains largely unexplained. Given the importance of this issue, the present study has been conducted with the aim of determining relationships between infrastructural, human factors and safety outcomes of cyclists. Objectives: This study aimed, first, to examine the relationship between key infrastructural and human factors present in cycling, bicycle-user characteristics, and their self-reported experience with road crashes. And second, to determine whether a set of key infrastructural and human factors may predict their self-reported road crashes. Methods: For this cross-sectional study, a total of 1064 cyclists (38.8% women, 61.2% men; M = 32.8 years of age) from 20 different countries across Europe, South America and North America, participated in an online survey composed of four sections: demographic data and cycling-related factors, human factors, perceptions on infrastructural factors, and road crashes suffered. Results: The results of this study showed significant associations between human factors, infrastructural conditions and self-reported road crashes. Also, a logistic regression model found that self-reported road crashes of cyclists could be predicted through variables such as age, riding intensity, risky behaviors, and problematic user/infrastructure interactions. Conclusions: The results of this study suggest that self-reported road crashes of cyclists are influenced by features related to the user and their interaction with infrastructural characteristics of the road.

In this study, we aimed to identify the factors affecting the night-time economy in Hanoi to achieve the sustainable development of this economy. We surveyed four selected groups of subjects: people, tourists, business establishments, and managers in Hanoi City, in which tourists were nationwide but have been on a night tour in Hanoi. We chose a nonrandom convenience sample. With the above sample size, the number of respondents was insufficient, so we selected districts with potential for night economic development including Hoan Kiem, Tay Ho, Dong Da, Nam Tu Liem, Ha Dong, and Gia Lam. We obtained 463 usable surveys. We processed and analyzed the data using SPSS Statistics 26.0 software. Our quantitative study included: (1) testing the suitability of the scale for the variables using Cronbach’s alpha, (2) analyzing the EFA factors to check the convergence of the observed variables and the separation between the independent variables, (3) checking the correlation to evaluate the problem of multicollinearity of the model; , and (4) performing regression analysis to evaluate the impact of the factors on night-time economic development in Hanoi City. The results showed that the variables positively impacted night-time economic development in Hanoi, but we found differences in the levels of their impact. Among the four factors, factor 3 (promotion and sharing) had the strongest impact on night-time economic development, followed by factor 2 (infrastructure and safety), factor 1 (institutions and environment), and factor 4 (nature and resources.)