The lack of defect image data is one of the main factors affecting the accuracy of supervised deep learning-based defect detection models. In response to the insufficient training data of defect images with complex backgrounds such as rust and surface oil leakage in substation equipment, leading to poor performance of the detection model, this paper proposed a novel adversarial deep learning model for substation defect generation: ADD-GAN. In comparison to existing generative adversarial networks, this model generates defect images based on effectively segmented local areas of substation equipment images, avoiding image distortion caused by global style changes. Additionally, the model utilizes a joint discriminator for overall image and defect image to address the issue of low attention to local defect areas, thereby improving the loss of image features. This enhances the overall quality of generated images as well as locally generated defect images, ultimately improving image realism. Experimental results demonstrate that the YOLOV7 object detection model trained on the dataset generated using the ADD-GAN method achieves an mAP of 81.5% on the test dataset, representing an improvement of 9.6% over the original dataset, 5.7% over traditional augmentation methods, and 7% over typical adversarial deep learning methods. This confirms that the ADD-GAN method can generate a high-fidelity dataset of substation equipment defects.

Advanced lithography requires highly sensitive photoresists to improve lithographic efficiency, and it is critical yet challenging to develop high-sensitivity photoresists and imaging strategies. Here, we report a novel strategy for ultra-high sensitivity using hexafluoroisopropanol (HFIP)-containing fluoropolymer photoresists. The incorporation of HFIP, with its strong electrophilic property and electron-withdrawing effect of the fluorine atoms, significantly increases the acidity of the photoresist after exposure, enabling imaging without conventional photoacid generators (PAGs). The HFIP-containing photoresist has been evaluated by electron beam lithography to achieve a trench of ~40 nm at an extremely low dose of 3 μC/cm2, which shows sensitivity enhancement by ~10 times to the commercial PAGs involved system, revealing its high-sensitivity and high-resolution features. Our results demonstrate a new type of PAGs and a novel approach to higher-performance imaging beyond conventional photoresist performance tuning.

In order to reach the theoretical efficiency limits of lead-based metal halide perovskite solar cells, the voltage should be enhanced because it suffers from nonradiative recombination. Perovskite materials contain intrinsic defects that can act as Shockley-Read-Hall recombination centers. Several experimental and computational studies have characterized such defect states within the band gap. We give a systematic overview of compositional engineering by distinguishing the different defect reducing mechanisms. Doping effects are divided into influences on: (1) Crystallization; (2) Lattice properties. Incorporation of dopant influences the lattice properties by: (a) Lattice strain relaxation; (b) Chemical bonding enhancement; (c) Band gap tuning. The intrinsic lattice strain in undoped perovskite was shown to induce vacancy formation. The incorporation of smaller ions, such as Cl, F and Cd, increases the energy for vacancy formation. Zn doping is reported to induce strain relaxation but also to enhance the chemical bonding. The combination of computational studies using (DFT) calculations quantifying and qualifying the defect reducing propensities of different dopants with experimental studies is essential for deeper understanding and unraveling insights, such as the dynamics of iodine vacancies and the photochemistry of the iodine interstitials, and can eventually lead to a more rational approach in the search for optimal photovoltaic materials.

“Pecorino” is a typical semi-hard cheese obtained with raw or heat-treated sheep milk using procedures to valorize the raw material's chemical and microbiological properties. In the present study, using a high throughput method of 16S rRNA gene sequencing, we assessed the evolution of the microbiome composition from milk to Pecorino cheese in artisanal processes using milk from Comisana and Lacaune sheep breeds. The comparative analysis of the bacterial com-munity composition revealed significant differences in the presence and abundance of specific taxa in the milk microbiome of the Comisana and Lacaune breeds. NGS analysis also revealed differences in the curd microbiome related to dairy farming practices, which have a relevant effect on the final structure of the Pecorino-cheese microbiome.

Pancreatic cancer stands out as one of the most lethal forms of malignancies, representing 2% of all cancer cases and contributing to 5% of cancer-related fatalities. Therefore, early detection of pancreatic cancer is crucial for enhancing treatment outcomes. Various hereditary cancer syndromes have been linked to an elevated risk of developing pancreatic cancer, suggesting potential benefits from surveillance strategies for individuals at risk. Presently, precision medicine employs PARP inhibitor therapy for pancreatic cancer patients carrying germline variants in Homologous Recombination Repair (HRR) genes. Our objective was to ascertain the occurrence of germline pathogenic/likely pathogenic variants in genes predisposing to cancer among pancreatic cancer patients. Methodologically, we analyzed 184 pancreatic cancer patients referred to our laboratory for genetic examination. Utilizing a Next-Generation Sequencing (NGS) approach, we scrutinized 52 genes implicated in hereditary cancer predisposition. Our findings revealed that 21% of the patients analyzed harbored germline pathogenic/likely pathogenic variants. Within this subset, 48% exhibited positive results in pancreatic cancer susceptibility genes, namely ATM (17%), BRCA1 (12%), BRCA2 (7%), CDKN2A (7%), and PALB2. Significantly, 64.3% of the pathogenic variants were associated with genes involved in the HRR pathway (ATM, BRCA1, BRCA2, BRIP1, CHEK2, FANCL, MRE11, PALB2, RAD50, RAD51B and RAD51C). In conclusion, our study underscores the significance of multigene genetic testing for pancreatic cancer patients, with 21% of individuals yielding findings linked to pancreatic or other cancer predisposition. Moreover, patients carried pathogenic/likely pathogenic variants in HRR genes, potentially benefiting from targeted therapies such as PARP inhibitors or platinum-based treatments.

Solar photovoltaic (PV) generation suffers from multiple serious issues, for example shading effects directly affect the performance of installed PV arrays. By studying these issues, it can play a key role in improving the limitations and performance of PV panels. The study of PV arrays under partial shading conditions is mentioned in many papers as a part of other studies and as an independent phenomenon. Therefore, it is essential to improve these studies and update them with new research and study this problem in detail to know how to limit the effects of partial shading irradiance conditions on PV arrays performances, including economical aspects. This paper proposes to study the effects of different partial shading irradiance conditions for a PV array in various configurations. The analysis is proved in detail through the simulation of the proposed PV array in the Matlab/Simulink environment. The obtained results show the performances of interconnected PV arrays under different partial shading irradiance and temperature conditions, including the solar array I-V and P-V characteristics. In addition, different PV array configurations with and without bypass and blocking protection diodes improve and minimize the effect of partial shading conditions and avoid the reductions in output power.

High resolution information on nucleotide arrangement in the genome of any or-ganism is critical to understand its genetic makeup, function, and evolutionary his-tory. For years, DNA sequencing has provided crucial breakthroughs in the field of genomics and molecular biology. With the advent of technology, Next Generation Sequencing has now transformed the whole genome sequencing prospects, thus unveiling the novel and interesting features of an organism genome that can behold. Next generation sequencing platforms offer realistic approach to identify and anal-yses whole genome with high throughput, accuracy, scalability in a very short time span. Information obtained can be further used in improving our existing healthcare systems, designing novel and personalized therapeutic modules, making the envi-ronment sustainable and proactively preparing ourselves for future pandemics and outbreaks. This article discusses the various NGS technologies and approaches, their advantages, drawbacks, and futuristic usage in different fields. Though still in nascent stages and marred with flaws, with ongoing advancement, NGS will indeed have promising impacts in the future.

Circulating cell-free DNA (cfDNA) refers to small fragments of DNA molecules released after programmed cell death and necrosis in several body fluids such as blood, saliva, urine, and cerebrospinal fluid. The discovery of cfDNA has revolutionized the field of non-invasive diagnostics in the oncologic field, in prenatal testing, and in organ transplantation. Despite the potential of cfDNA and the solid results published in recent literature, several challenges remain, represented by low abundance, need for highly sensitive assays and analytical issues. In this review, the main technical advances in cfDNA analysis are presented and discussed, with a comprehensive examination of the current available methodologies applied in each field. Considering the potential advantages of cfDNA, this biomarker is increasing its consensus among clinicians, as it consents to monitor patients’ conditions in an easy and non-invasive way, offering a more personalized care. Nevertheless, cfDNA analysis is still considered a research marker to be further validated, and very few centers are implementing its analysis in the real-life assistance. As technical improvements are enhancing the performances of cfDNA analysis, its application will transversally improve patients’ quality of life.

In the current paper, a residual generation filter with finite memory structure is proposed for sensor fault detection. The proposed finite memory residual generation filter provides the residual by real-time filtering of fault vector using only the most recent finite observations and inputs on the window. It is shown that the residual given by the proposed residual generation filter provides the exact fault for noise-free systems. The proposed residual generation filter is specified to the digital filter structure for the amenability to hardware implementation. Finally, to illustrate the capability of the proposed residual generation filter, numerical examples are performed for the discretized DC motor system having the multiple sensor faults.

Visual Question Generation (VQG) from images is a rising research topic in both fields of natural language processing and computer vision. Although there are some recent efforts towards generating questions from images in the open domain, the VQG task in the medical domain has not been well-studied so far due to the lack of labeled data. In this paper, we introduce a goal-driven VQG approach for radiology images called VQGRaD that generates questions targeting specific image aspects such as modality and abnormality. In particular, we study generating natural language questions based on the visual content of the image and on additional information such as the image caption and the question category. VQGRaD encodes the dense vectors of different inputs into two latent spaces, which allows generating, for a specific question category, relevant questions about the images, with or without their captions. We also explore the impact of domain knowledge incorporation (e.g., medical entities and semantic types) and data augmentation techniques on visual question generation in the medical domain. Experiments performed on the VQA-RAD dataset of clinical visual questions showed that VQGRaD achieves 61.86% BLEU score and outperforms strong baselines. We also performed a blinded human evaluation of the grammaticality, fluency, and relevance of the generated questions. The human evaluation demonstrated the better quality of VQGRaD outputs and showed that incorporating medical entities improves the quality of the generated questions. Using the test data and evaluation process of the ImageCLEF 2020 VQA-Med challenge, we found that relying on the proposed data augmentation technique to generate new training samples by applying different kinds of transformations, can mitigate the lack of data, avoid overfitting, and bring a substantial improvement in medical VQG.

Osteosarcoma (OS) are the most prevalent malignant bone tumors in adolescents and young adults.. OS cells grow in a permissive local microenvironment which modulates their behavior and facilitates all steps in tumor development (e.g., proliferation/quiescence, invasion/migration, drug resistance) and contributes to their intrinsic heterogeneity. The lung parenchyma is the most common metastatic site in OS, and metastatic foci are frequently associated with a poor clinical outcome. Although multiple factors may be responsible for the disease, including genetic mutations (e.g., Rb, p53), the molecular mechanism of development of OS remains unclear and the conventional treatment for OS is still based on a sequential approach that combines chemotherapy and surgery. Also, despite the increase in clinical trials, the survival rates for OS have not improved. Non-specific targeting therapies thus show poor therapeutic effects with side effects at high doses. For these reasons, many efforts have been done to characterize the complex genome of osteosarcoma thanks to the whole exome analysis with the aim to identify predictive biomarkers to give to these patients a better therapeutic option. This review aims to summarize and discuss the main recent advances in OS molecular research for precision medicine.

The purpose of this paper is to explore the implementation of Retrieval-Augmented Gen- 14 eration (RAG) technology with open-source Large Language Models (LLMs). For this purpose, a 15 web-based application named PaSSER that integrates RAG with three models - Mistral:7b, 16 Llama2:7b: Orca2:7b, is developed. In its development various technologies are used, including 17 Blockchain for managing and storing assessment results of built-in testing modules. PaSSER em- 18 ploys a set of evaluation metrics for LLMs’ performance - METEOR, ROUGE, BLEU, Perplexity, 19 Cosine similarity, Pearson correlation, and F1 score. The specialized knowledge base is in the smart 20 agriculture domain. As an illustration, the paper presents results and analysis of two tests. First one 21 is assessing the performance of LLMs across different hardware configurations, the other is deter- 22 mining the model that delivers most accurate and contextually relevant responses within the RAG. 23 The paper also discusses the integration of blockchain technology with LLMs to manage and store 24 assessment results within a blockchain environment. The tests revealed that Mistral:7b demon- 25 strates the best results across most of the evaluated metrics. The discussion section comments on 26 technical and hardware considerations that affect the performance of LLMs. Future development 27 will focus in leveraging new larger pre-trained open-source LLMs, exploring different finetuning 28 approaches, and further integration with Blockchain and IPFS.

Generative models have recently gained popularity in Remote Sensing, offering substantial benefits for interpreting and utilizing satellite imagery across diverse applications such as climate monitoring, urban planning, and wildfire detection. These models are particularly adept at addressing the challenges posed by satellite images, which often exhibit domain variability due to seasonal changes, sensor characteristics, and especially variations in spectral bands. Such variability can significantly impact model performance across various tasks. In response to these challenges, our work introduces a novel approach that harnesses the capabilities of Generative Adversarial Networks (GANs), augmented with Contrastive Learning, to generate target domain images that account for multi-spectral band variations effectively. By maximizing mutual information between corresponding patches and leveraging the power of GANs, our model aims to generate realistic-looking images across different multi-spectral domains. We present a comparative analysis of our model against other well-established generative models, demonstrating its efficacy in generating high-quality satellite images while effectively managing domain variations inherent to multi-spectral diversity.

This paper performs a comprehensive analysis of the wind energy potential of onshore regions in Greece with emphasis on quantifying the volume risk and the spatial covariance structure. Optimization techniques are employed to derive efficient wind capacity allocation plans (also known as generation portfolios) incorporating different yield aspirations. The generation profile of minimum variance and other optimal portfolios along the efficient frontier are subject to rigorous evaluation using a fusion of descriptive and statistical methods. In particular, principal component analysis is employed to estimate factor models and investigate the spatiotemporal properties of wind power generation, providing valuable insights into the persistence of volume risk. The overarching goal of the study is to employ a set of statistical and mathematical programming tools guiding investors, aggregators and policy makers in their selection of wind energy generating assets. The findings of this research challenge the effectiveness of current policies and industry practices, offering a new perspective on wind energy harvesting with a focus on the management of volume risk.

This paper presents an optimized energy management strategy for Li-ion power batteries used on electric vehicles (EVs) at low temperatures. Under low-temperature environments, EVs suffer a sharp driving range loss resulted from the energy and power capability reduction of the battery. Simultaneously, because of Li plating, battery degradation becomes an increasing concern as temperature drops. All these factors could greatly increase the total vehicle operation cost. Prior to battery charging and vehicle operating, preheating battery to a battery-friendly temperature is an approach to promote energy utilization and reduce total cost. Based on the proposed LiFePO4 battery model, the total vehicle operation cost under certain driving cycles is quantified in the present paper. Then given a certain ambient temperature, a target temperature of preheating is optimized under the principle of minimizing total cost. As for the preheating method, a liquid heating system is also implemented on an electric bus. Simulation results show that the preheating process becomes increasingly necessary with a decreasing ambient temperature; however, the preheating demand declines as driving range grows. Vehicle tests verify that the preheating management strategy proposed in this paper is able to save total vehicle operation cost.

This paper presents a novel approach to power management techniques in energy storage system (ESS) interoperability with the energy power system (EPS) by inserting a SCADA controlled directional protection relay for improving the mode switching sequence. According with latest European standards, all necessary measures for re-synchronization and reconnection for health work of the system must be taken. The proposed approach intends to improve the “interface” between storage systems and electric power grid by using a directional relay which provides interoperability improvement by automatic recognizing and differentiating the switching sequence of the mode of operation from the fault mode. Simulated results from a small scale electrical generating system are provided. The results demonstrate that the proposed power management solution is technically ideal to achieve high quality energy while retaining the stability of the power grid network. The interoperability of PHS systems integrated with the electric power grid usually leads to perturbations in terms of frequency of the generated voltage, and for improving it we designed an automatic treating and re-connecting software module. This work regards the importance of producing electricity from green and renewable energy sources, while retaining the stability and reliability of the power grid. ESS systems are widely used to help balancing of intermittent forms of load demand on the electrical power grid at specific key moments. In this article, the pumped hydro storage (PHS) technologies are proposed as an economical way to utilize smoothly the off-peak energy or surplus energy, by pumping water to a reservoir at a higher level. During peak load periods, the stored water is discharged through the reversible pump-turbine to generate electricity to meet the peak demand controlled by designed SCADA application.

MicroRNAs (miRNAs) are crucial regulatory RNAs, originated from hairpin precursors. For the past decade, researchers are focusing extensively on miRNA profiles in various plants. However studies on precursor miRNAs (pre-miRNAs) global profiling stay static even in model plants. Here, for the first time in a non-model plant, Abelmoschus esculentus with negligible genome information, we are reporting the global profiling to characterize the miRNAs and their associated pre-miRNAs by applying next generation sequencing approach. Preliminarily we performed sRNA (small RNA) sequencing with five biological replicates of leaf samples to attain 207,285,863 reads and data analysis using miRPlant keyed out 128 known and 845 novel miRNA candidates. With the objective to seize their associated hairpin precursors, we accomplished pre-miRNA sequencing to attain 83,269,844 reads. The paired end reads are merged, adaptor trimmed and the resulting 40-241 nt (nucleotide) sequences were picked out for analysis by using perl scripts from miRGrep tool and in-house built shell script for Minimum Fold Energy Index (MFEI) calculation. Applying stringent criteria of dicer cleavage pattern and perfect stem loop structure revealed precursors for 57 known miRNAs of 15 families and 18 novel miRNAs. Quantitative Real Time (qRT) PCR was performed to determine the expression of selected miRNAs.

During the last two decades several cases of venous thrombosis (VTE) after a prolonged period at a computer has been described, denominated “eThrombosis”. Video gaming on a computer has become very popular and can be a social activity where several players are gathered to play against each other or in a virtual environment for several days (“LAN (i.e., Local Area Network) parties”) where the participants are sedentary and consuming calorie-rich food items. The aim of this study was to investigate a potential coagulation activation during a 42 hour LAN party. Nine male gamers volunteered for the LAN party. Citrated blood was sampled before and every 6 hours, and plasma was analyzed for thrombin generation, and Thrombin-antithrombin-complexes (TAT), prothrombin Fragment 1+2 (F1+2), and D-dimer. Thrombin generation increased slightly but not significantly during the LAN party, whereas the coagulation activation markers were unchanged. These results do not indicate that the coagulation system is activated significantly during 42 h gaming with minimal physical activity. Although an increased activity cannot be excluded, it does not directly indicate a risk of VTE in general. It may be specific and particularly susceptible in-dividuals who are prone to thrombosis and, therefore, are at risk of developing e-thrombosis.

Analyzing BRCA1/2 tumor pathogenic variants (TPVs) in epithelial tubal/ovarian cancers (EOC) has become an essential part of the diagnostic workflow in many centers to guide treatment options and genetic cascade testing. However, there is no standardization of testing procedures, including techniques, gene assays, or sequencers used, and data on the execution of tumor tests remains scarce. Therefore, we evaluated characteristics of BRCA1/2 tumor testing in advanced-stage EOC with real-world national data. Pathology reports of patients diagnosed with EOC in 2019 in the Netherlands were obtained from the Dutch Pathology Registry (PALGA), and data regarding histological subtype and BRCA1/2 tumor tests were extracted. A total of 999 patients with advanced-stage EOC were included. Tumor tests were performed for 502 patients (50.2%) and BRCA1/2 TPVs were detected in 14.7%. Of all tests, 48.6% used hybrid capture techniques and 26.5% used PCR-based techniques. More than half of the tests (55.0%) analyzed other genes in addition to BRCA1/2. Overall, this study highlights the heterogeneity in the execution of BRCA1/2 tumor tests. Despite a lack of evidence of quality differences, we emphasize that adequate reporting and internal and external quality monitors are essential for high-quality implementation and execution of reliable BRCA1/2 tumor testing, which is crucial for identifying all patients with BRCA1/2 TPVs.

This research explores the behaviors of Generation Z consumers in China, particularly focusing on their interaction with companies through social media for the joint creation of value. Adopting a qualitative methodology, the research initially constructs a scale for assessing co-creation of value on social media platforms. Subsequently, it delves into the motivational aspects of users' engagement in these co-creative activities. The study unveils a range of utilitarian and hedonic motivations that drive Generation Z's value co-creation actions on social media. Insights derived from the findings offer both theoretical and practical implications for the field.

The rising importance of Big Data in modern information analysis is supported by vast quantities of user data, but it is only possible to collect sufficient data for all tasks within certain data-gathering contexts. There are many cases where a domain is too novel, too niche, or too sparsely collected to adequately support Big Data tasks. To remedy this, we have created ADG Engine that allows for the generation of additional data that follows the trends and patterns of the data that’s already been collected. Using a database structure that tracks users across different activity types, ADG Engine can use all available information to maximize the authenticity of the generated data. Our efforts are particularly geared towards data analytics by identifying abnormalities in the data and allowing the user to generate normal and abnormal data at custom ratios. In situations where it would be impractical or impossible to expand the available dataset by collecting more data, it can still be possible to move forward with algorithmically expanded data datasets.

Entropy generation, formulated by combining the first and second laws of thermodynamics with an appropriate thermodynamic potential, emerges as the difference between a phenomenological entropy function and a reversible entropy function. The phenomenological entropy function is evaluated over an irreversible path through thermodynamic state space via real time measurements of thermodynamic states. The reversible entropy function is calculated along an ideal reversible path through the same state space. Entropy generation models for various classes of systems—thermal, externally loaded, internally reactive, open and closed––are developed via selection of suitable thermodynamic potentials. Here we simplify thermodynamic principles to specify convenient and consistently accurate system governing equations and characterization models. The formulations introduce a new and universal Phenomenological Entropy Generation (PEG) theorem. The systems and methods presented––and demonstrated on grease degradation, battery charging and discharging, metal fatigue and pump flow––can be used for design, analysis, and support of diagnostic monitoring and optimization.

This paper introduces an innovative energy circuit that challenges conventional understandings of energy conservation, marking a significant departure from traditional frameworks. Seeking to enhance energy generation within existing paradigms, this innovation holds promise for addressing pressing global issues such as the energy crisis and environmental sustainability, while also stimulating scientific inquiry. In contrast to prevalent misconceptions rooted in philosophical and scientific constraints, this study refutes the notion of generating energy from nothing and questions the viability of perpetual motion machines as conceptual models. Instead, it proposes a novel circuit design derived from an unconventional electrical short circuit, which is shown to disrupt the established principles of energy conservation. This circuit offers a transformative approach with diverse applications, including self-recharging capabilities for electric vehicles, bolstering microgrid infrastructure, and facilitating the integration of renewable energy sources. Transcending conventional scientific boundaries, this paper prompts philosophical reflections on the evolving nature of scientific exploration. Ultimately, the energy circuit represents a pivotal step towards mitigating the global energy crisis by reducing reliance on finite resources and fostering sustainability. The paper concludes by illustrating the circuit's potential to revolutionize energy systems and contribute to a more resilient and sustainable future.

Technological developments, as a result of globalization, indirectly affect human lifestyles, one of which is the Indonesian people. In a situation of change towards the Industrial Revolution 4.0, Pancasila has a role as a guide for the Indonesian people to be what by the noble values ​​of the nation. However, the role of the millennial generation in maintaining these noble values ​​is important considering that they are the spearhead of the country's development. From this statement, this study aims to identify and formulate steps to maintain the noble values ​​of Pancasila among the millennial generation so that it does not eliminate national identity and understand the urgency of implementing the Pancasila lifestyle in the era of globalization. By using the literature review method, it can be seen that "grounding" and strengthening the essence of Pancasila values ​​can be a solution so that the existence of Pancasila continues to shine. The Pancasila lifestyle deserves to be implemented because it regulates all behaviors of speech, thought, behavior, action, and good manners so that it must be expressed in the life of the nation and state as well as our everyday life.

When a microgrid is grid-tied to a distribution system, it can provide surplus power generation to the distribution system, if any abnormality or interruption occurs in the distribution system, the microgrid can operate in standalone mode to isolate the impact of the abnormality or interruption. However, if the microgrid can not collect enough information from the distribution system, it may cause the failure of generation transferring of distribution feeders, or even further influence the stability of the distribution system. In this paper, a strategy for the resilient control of a microgrid is proposed. It can solve the above-mentioned problem, reduce the duration of the outage of loads. This strategy is experimented in the microgrid in the Institute of Nuclear Energy Research (INER), the reliability is also analyzed to evaluate the unavailability of the microgrid in INER, and it is verified that the proposed strategy can reduce the duration of the outage of loads, and hence the reliability of a microgrid can be upgraded.

In recent years, the focus of disease resistance and susceptibility studies in cattle have been on determining patterns in the innate immune response of key proteins, such as Toll-like receptors (TLR). In the bovine genome, there are 10 TLR family members and, of these, TLR2, TLR4 and TLR6 are specialized in recognition of bacterial ligands. Indigenous cattle breeds of Anatolia have been reported to show fewer signs of clinical bacterial infections, such as bovine tuberculosis and mastitis, and it is hypothesized that this might be due to a less stringent genetic selection during breeding. In contrast, Holstein-Friesian cattle have been under strong selection for milk production, which may have resulted in greater susceptibility to diseases. To test this hypothesis, we have compared the TLR2, TLR4 and TLR6 genes of Anatolian Black (AB), East Anatolian Red (EAR), South Anatolian Red (SAR), Turkish Grey (TG), and Holstein (HOL) cattle using Next Generation Sequencing. The SAR breed had the most variations overall, followed by EAR, AB, TG and HOL. TG had the most variations for TLR2 whereas SAR had the most variations in TLR4 and TLR6. We compared these variants with those associated with disease and susceptibility traits. We used exon variants to construct haplotypes, investigated shared haplotypes within breeds and determined candidate haplotypes for disease resistance phenotype in Anatolian cattle breeds.

Paraphrase Generation is one of the most important and challenging tasks in the field of Natural Language Generation. The paraphrasing techniques help to identify or to extract/generate phrases/sentences conveying the similar meaning. The paraphrasing task can be bifurcated into two sub-tasks namely, Paraphrase Identification (PI) and Paraphrase Generation (PG). Most of the existing proposed state-of-the-art systems have the potential to solve only one problem at a time. This paper proposes a light-weight unified model that can simultaneously classify whether given pair of sentences are paraphrases of each other and the model can also generate multiple paraphrases given an input sentence. Paraphrase Generation module aims to generate fluent and semantically similar paraphrases and the Paraphrase Identification systemaims to classify whether sentences pair are paraphrases of each other or not. The proposed approach uses an amalgamation of data sampling or data variety with a granular fine-tuned Text-To-Text Transfer Transformer (T5) model. This paper proposes a unified approach which aims to solve the problems of Paraphrase Identification and generation by using carefully selected data-points and a fine-tuned T5 model. The highlight of this study is that the same light-weight model trained by keeping the objective of Paraphrase Generation can also be used for solving the Paraphrase Identification task. Hence, the proposed system is light-weight in terms of the model’s size along with the data used to train the model which facilitates the quick learning of the model without having to compromise with the results. The proposed system is then evaluated against the popular evaluation metrics like BLEU (BiLingual Evaluation Understudy):, ROUGE (Recall-Oriented Understudy for Gisting Evaluation), METEOR, WER (Word Error Rate), and GLEU (Google-BLEU) for Paraphrase Generation and classification metrics like accuracy, precision, recall and F1-score for Paraphrase Identification system. The proposed model achieves state-of-the-art results on both the tasks of Paraphrase Identification and paraphrase Generation.

As the international community attaches importance to environmental and climate issues, carbon dioxide emissions in various countries have been subject to constraints and limits. Carbon trading market, as a market tool to reduce greenhouse gas emissions, has gone through a development process from a pilot carbon market to a national carbon market in China. At present, the industries included in the national carbon market are mainly the electric power industry, and the carbon emissions of the electric power industry account for about 40% of the national carbon emissions. According to the construction history of foreign carbon markets, China's future carbon quota allocation will gradually transition from free allocation to auction allocation,the auction mechanism will bring a heavy economic burden to the electric power industry, especially the thermal power generation industry. Therefore, this study takes Guangdong Province as an example to optimize the power generation mix with the objective of minimizing the total economic cost after the innovative introduction of the carbon quota auction mechanism and constructs an optimization model of the power generation mix based on the auction ratio by comprehensively applying the system dynamics model and the multi-objective linear programming model and systematically researches the power generation structure under different auction ratios with the time scale of months and quantitatively evaluates the economic inputs needed to reduce the greenhouse gas emissions.The results of the study show that after comprehensively comparing the total economic cost, renewable energy development and carbon emissions, it is the most scientific and reasonable to set the auction ratio of carbon allowances at 20%, which achieves the best level of economic and environmental benefits.

The conversion of methane into chemicals is of interest to achieve a decarbonized future. Fuel cells are electrochemical devices commonly used to obtain electrical energy, but can be utilized either for chemicals production or both energy and chemicals cogeneration. In this work, the partial oxidation of methane in fuel cells for electricity generation and valuable chemicals production at the same time is reviewed. For this purpose, different types of methane-fed fuel cells, both low temperature fuel cells, such as PEMFCs and AAEMFCs, and high temperature fuel cells, such as SOFCs, have been used. Also if few works have been devoted to this topic, the promising results drive the development of fuel cells using methane as the source for the cogeneration of power and valuable chemicals.

The increasingly used approach of combining different simulation software in testing of automated driving systems (ADS) increases the need for potential and convenient software designs. Recently developed co-simulation platforms (CSP) provide the possibility to cover the high demand on testing kilometers for ADS by combining vehicle simulation software (VSS) with traffic flow simulation software (TFSS) environments. The emphasis on the demand of testing kilometers is not enough to choose a suitable CSP. The complexity level of the used vehicle, object, sensors and environment models is essential for valid and representative simulation results. Choosing a suitable CSP raises the question of how the test procedures should be defined and constructed and what the relevant test scenarios are. Parameters of the ADS, the environments, objects, sensors in VSS as well as traffic parameters in TFSS can be used to define and generate test scenarios. In order to generate a large number of scenarios in a systematic and automated way, suitable and appropriate software designs are required. In this paper we present a software design for CSP based on the Model-View-Controller (MVC) design pattern and implementation of a complex CSP for virtual testing of ADS. Based on this design, an implementation of a CSP is presented using the VSS from IPG Automotive called CarMaker and the TFSS from PTV Group called Vissim. The results have shown that the presented CSP design and the implementation of the co-simulation can be used to generate relevant scenarios for testing of ADS.

In this work, satellite data from the Clouds and Earth’s Radiant Energy System (CERES) and Moderate Resolution Imaging Spectroradiometer (MODIS) instruments is analyzed to determine how the global absorbed sunlight and global entropy generation rate have changed during the time period from 2002 to 2023. The data is used to test hypotheses derived from the Maximum Power Principle (MPP) and Maximum Entropy Production Principle (MEP) about the evolution of earth’s surface and atmosphere. The results indicate that the amount of absorbed sunlight has increased over the last 20 years but rising surface temperatures have caused the entropy generation rate to remain approximately constant despite that decrease in albedo. The results are simpler to explain using the MPP but do not completely rule out the MEP. Given the acceptance of the MPP or MEP, some extensions and nuances are discussed.

The numerical simulation of entropy generation at mixed natural free and forced convection flow in a square lid-driven cavity filled with an eletrically conducting binary fluids saturated porous media in the presence of a magnetic field is performed in this investigation. Both the top and bottom horizontal walls of the cavity are kept at constant and different temperatures while the left and right vertical walls are adiabatic and insulated. The magnetic field is applied in normal direction to the cavity. The Darcy model, including Brinkman term relative to viscous effects and Forchheimer term due to inertial forces, is used for the momentum equations, and the SIMPLER algorithm, based on the control volume finite-element method approach is used to solve the pressure –velocity coupling. The flow pattern and the heat transfer characteristics inside the cavity are presented in the form of isotherms, streamlines and isentropic lines and average Nusselt number trend. The entropy generation rate is determined for various values of Darcy number (10^-3 ≤ Da ≤ 1) and for a range of Hartmann number (0 ≤ Ha ≤ 10²). This study is limited to Pr = 7 which corresponds to water. It is observed that entropy generation is very affected by the variations of dimensionless control parameters considered.

Character education is essential for the current millennial generation and must be applied in everyday life in the surrounding community. The character of the millennial generation is different from the previous generation, which requires us to pay more attention to character education which is starting to erode along with the times. The Millennial generation is a generation that in everyday life can never be separated from science and technology. In this digital era, the millennial generation has a social function of strength in technology. In this study, there are research questions that will be discussed in this article, namely the first regarding what problems occur in the millennial generation who occupy the digital era?. Second, what is the important role and influence of the digital era on character education for the millennial generation in Indonesia?. Writing this article uses a qualitative research method, namely a literature review study, where researchers use or look for references from journals or books. Samples of respondents were taken randomly from each region, and there were ten respondents. From this research, it is found that the millennial generation in the digital era chooses to use social media to access the latest news and information rather than reading print media that contains education. This article aims to find out the importance of character education for the millennial generation, which is starting to erode with the times in the digital era. Many people underestimate character education, especially for the current millennial generation. Therefore, we must implement educational programs at any level, especially in Indonesia, because the character shows the national identity. This article will discuss the vital role and influence of character education for millennials who live in the digital era to be aware of the importance of character education in citizenship.

After human genome sequencing and rapid changes in genome sequencing methods, we have entered in the era of rapidly accumulating genome-sequencing data. This has poses development of several types of methods for representing results of genome sequencing data. Circular genome visualizations tools are also critical in this area as they provide rapid interpretation and simple visualization of overall data. In the last 15 years, we have seen rapid changes in circular visualization tools after the development of the circos tool with 1–2 tools published per year. Herein we have summarized and revisited all these tools until the third quarter of 2018.

Metal halide perovskites (MHPs), in particular lead-based halide perovskites have earned a recognized fame in several fields for their outstanding optoelectronics properties including direct generation of free charge carriers, optimal ambipolar charge carrier transport properties, high absorption coefficient, point-defect tolerance, and compositional versatility. Nowadays, this class of materials represents a real and promising alternative of silica for the photovoltaic technologies. This worthy success led to a growing interest in the exploration of MHP materials in other hot research fields such as the solar-driven photocatalytic water splitting towards hydrogen production, CO2 reduction to CO and CH4, useful organic reactions such as organic synthesis (formation of C-C, C-N, and C-O bonds), and pollutants and dye degradation. Nevertheless, many of these perovskite materials showed air and moisture instability problems that considerably hinder their practical application for photocatalytic water splitting and photodegradation of CO2. Moreover, if the chemical instability is a problem that can be in part mitigated by the optimization of the lattice structure, the presence of lead represents a real problem for the practical application of these type of materials in commercial devices. To successfully overcome this problem, lead-free metal halide perovskites (LFMHPs) have gained increasing interest thanks to their promising optoelectronic properties, comparable to lead-based materials, and their eco-friendly nature. Among all the lead-free perovskite alternatives, this mini review will focus the attention on the bismuth-based perovskites and perovskite derivatives with specific focus on solar-driven photocatalysis application for H2 evolution.

In this work various sample of primary aluminum dross were investigated for composition and evaluation of hydrogen generation via hydrolysis in low concentration alkali solution. Composi-tion revealed low to moderate aluminium content and hydrolysis reactions showed low hydrogen generation volumes per sample mass as well as purity, where composition plays substantial role in the hydrogen evolution, yet showing that there is possible place for dross use in hydrogen generation. It was revealed that some dross samples in addition to hydrogen also release methane via hydrolysis. Rection rate was obtained by the shrinking core model, written for spherical solid particles. Sample composition on hydrogen generation volume is compared to known literature.

Large language models (LLMs) excel in providing natural language responses that sound authoritative, reflect knowledge of the context area, and can present from a range of varied perspectives. Agent Based Models and Simulation consist of simulated agents that interact within a simulated environment to explore societal, social, and ethical, among other, problems. Agents generate large volumes of data over time and discerning useful and relevant content is an onerous task. LLMs can help in communicating agents’ perspectives on key events by providing natural language narratives. However, these narratives need to be factual, transparent, and reproducible. To this end, we present a structured narrative prompt for sending queries to LLMs. Chi-square tests and Fisher’s Exact tests are applied to assess statistically significant difference in sentiment scores of the narrative messages between simulation generated narratives, ChatGPT-generated narratives, and real tweets. The narrative prompt structure effectively yields narratives with the desired components from ChatGPT. This structure is expected to be extensible across LLMs. In 14 out of 44 categories, ChatGPT generated narratives which has sentiment scores that were not discernibly different, in terms of statistical significance (alpha level of 0.05), from the sentiment expressed in real tweets. Three outcomes are provided: (1) a list of benefits and challenges for LLMs in narrative generation; (2) a structured prompt for requesting narratives of a LLM based on simulated agents’ information; and (3) an assessment of statistical significance in the sentiment prevalence of the generated narratives compared to real tweets. This indicates significant promise in the utilization of LLMs for helping to connect simulated agent’s experiences with real people.

Flammability was evaluated and the results showed the values of critical flux at extinguishment (CFE) as 49.5kW/㎡ on average, total heat release (Qt) as 0.21MJ on average, and peak heat release rate (Qp) as 0.66kW on average, which satisfied all of the thresholds presented by the IMO. Therefore, flame-retardant plywood, of which the flame-retardant performance was evaluated, was determined to be an applicable finishing material that satisfies fire safety standards.

This survey proposed an evaluation model to analyze and examine different approaches to generativity. In addition to problem domain concepts, the following concepts were used to define this model: Complexity and complexity management, and Systematics view to achieve unified and integrated insight into disparate evaluation criteria. The research's approach to the said concepts is first introduced. Then, the evaluation model is presented.

SARS-CoV-2 is a novel betacoronavirus and the aetiological agent of the current COVID-19 outbreak that originated in Hubei Province, China. While polymerase chain reaction is the front-line tool for SARS-CoV-2 surveillance, application of amplification-free and culture-free methods for isolation of SARS-CoV-2 RNA, partnered with next-generation sequencing, would provide a useful tool for both surveillance and research of SARS-CoV-2. We here release into the public domain a set of bait capture hybridization probe sequences for enrichment of SARS-CoV-2 RNA from complex biological samples. These probe sequences have been designed using rigorous bioinformatics methods to provide sensitivity, accuracy, and minimal off-target hybridization. Probe design was based on existing, validated approaches for detecting antimicrobial resistance genes in complex samples and it is our hope that this SARS-CoV-2 bait capture platform, once validated by those with samples in hand, will be of aid in combating the current outbreak.

Given the imperative of security, sustainability of supply, strategic considerations, and energy independence, there is a widely acknowledged need to persist in utilizing coal as the primary fuel for electricity generation in power plants. However, in order to combat the rising levels of CO2 in the atmosphere, it is crucial to advance the development of carbon capture and storage (CCS) technologies that enable fossil fuel power plants to achieve zero emissions. These technologies play a pivotal role in capturing and effectively storing CO2, thus ensuring that coal-based power generation can continue while significantly reducing its environmental impact. By implementing CCS solutions, fossil fuel power plants can transition towards a more sustainable and environmentally friendly energy future.The utilization of chemical solvents for CO2 absorption, coupled with long-term storage, presents an intriguing and commercially viable technology for CO2 capture. However, the significant energy demands of the solvent regeneration process necessitate optimization, particularly in large-scale power plants. While the current cost of CO2 capture stands at approximately #55,000.00(Naira) per ton of CO2, the objective is to reduce this cost to below #25,000.00(Naira) per ton of CO2. This reduction in cost is essential to ensure the economic feasibility and widespread adoption of CO2 capture technologies in power generation.This research paper explores various approaches to address the energy demands associated with amine scrubbing integration in a commercial power plant. It provides a comprehensive analysis, both technically and economically, of the performance of these different approaches. While some of the proposed schemes may result in minor efficiency reductions, the key objective is to calculate the specific cost per ton of CO2 captured. The primary focus is on identifying the most suitable configuration to implement large-scale, cost-effective schemes that can serve as a foundation for CO2 capture demonstration projects. By determining the optimal configuration, this research aims to pave the way for the successful implementation of efficient and economically viable CO2 capture technologies in the power generation sector.

Continuous glucose monitoring devices allow diabetes condition management. However, when limited data is available, one option is to increase their size by generating synthetic samples. From a homemade wearable prototype was created a real dataset with 18 instances and 53 attributes that capture characteristics of capillary and venous blood glucose, oxygen concentration, pulse rate, skin temperature, and 24 modules and 24 phases related to bio-impedance. The objective of this article is to generate synthetic datasets, and also it investigates the ideal features subset and optimal model for non-invasive diabetes prediction. Gaussian-Copulas (GC), conditional generative adversarial networks (CG), variational autoencoders, and Copula-GAN techniques' were used to generate five synthetic datasets. Experiments show that GC1 and GC2 datasets follow min/max boundaries and are not copies of the original data. Multilayer perceptron regressor outperformed (train and test) with 2.17, 2.51 in MAE; 9.29, 13.59 in MSE; 3.05, 3.69 in RMSE, and 0.95, 0.92 in R2 in GC1, and 2.64, 3.02 in MAE; 11.43, 15.11 in MSE; 3.38, 3.89 in RMSE, and 0.94, 0.92 in R2 in GC2 with eight features. Future work is necessary to explore autoencoder and generative architectures, datasets with diverse characteristics, and the effect of the number of features.

Modern electrical power systems integrate renewable generation, with solar generation being one of the pioneers worldwide. In Latin America, the greatest potential and development of solar generation is found in Chile through the National Electric System. However, its energy matrix faces a crisis of drought and reduction of emissions that limits hydroelectric generation and involves the definitive withdrawal of coal generation. The dispatch of these plants is carried out by the system operator, who uses a simplified mechanism, called “economic merit list” and which does not reflect the real costs of the plants to the damage of the operating and marginal cost of the system. This inefficient dispatch scheme fails to optimize the availability of stored gas and its use over time. Therefore, a real-time redispatch model is proposed that minimizes the operation cost function of the power plants, integrating the variable generation cost as a polynomial function of the net specific fuel consumption, adding gas volume stock restrictions and water reservoirs. In addition, the redispatch model uses an innovative "maximum dispatch power" restriction, which depends on the demand associated with the automatic load disconnection scheme due to low frequency. Finally, by testing real simulation cases, the redispatch model manages to optimize the operation and dispatch costs of power plants, allowing the technical barriers of the market to be broken down with the aim of integrating ancillary services in the short term, using the power reserves in primary (PFC), secondary (SCF), and tertiary (TCF) frequency control.

Adhesion systems are very important in robots for infrastructure inspection (especially in vertical walls). They present the challenge of optimizing the ratio vacuum/power consumption in battery-powered robots. In this paper a CFD (Computer Fluid Dynamics) modelling and optimization process of a robot adhesion system is carried out to determine the best performing configuration in terms of vacuum and power consumption. Analytical and numerical models were developed to predict the behaviour of the system for different configurations. The models were validated, using test rig measurements, by calibrating an arbitrary defined inlet height that simulates the leakage flow. Then, different geometric parameters were varied to determine the best performing configuration based on the vacuum/power consumption ratio value. The model presented in the paper was capable of predicting the behaviour of the system for different configurations, with a margin of error of 15% for the vacuum prediction and a 25% for the motor power calculation. Finally, the model was used to optimize parameters of the system, like the number of blades of the impeller. The adhesion system was conceived for the modular autonomous climbing legged robot ROMERIN.

This review delves into the critical role of automation and sensor technologies in optimizing parameters for thermal treatments within electricity power generation. The demand for efficient and sustainable power generation has led to a significant reliance on thermal treatments in power plants. However, ensuring precise control over these treatments remains challenging, necessitating the integration of advanced automation and sensor systems. This paper evaluates the pivotal aspects of automation, emphasizing its capacity to streamline operations, enhance safety, and optimize energy efficiency in thermal treatment processes. Additionally, it highlights the indispensable role of sensors in monitoring and regulating crucial parameters such as temperature, pressure, and flow rates. These sensors enable real-time data acquisition, facilitating immediate adjustments to maintain optimal operating conditions and prevent system failures. It explores the recent technological advancements, including machine learning algorithms and IoT integration, which have revolutionized automation and sensor capabilities in thermal treatment control. Incorporating these innovations has significantly improved the precision and adaptability of control systems, resulting in heightened performance and reduced environmental impact. This review underscores the imperative nature of automation and sensor technologies in thermal treatments for electricity power generation, emphasizing their pivotal role in enhancing operational efficiency, ensuring reliability, and advancing sustainability in power generation processes.

Interface solar steam generation (ISSG) are charming for its applications in desalination and wastewater treatment. Biomass is an attractive substrate for utilizing solar vapor evaporators because of its natural pore structure and water transportability. Polymers like polydopamine (PDA) and polypyrrole (PPy) with broadband spectrum absorption are fascinating in photothermal materials (PTMs). Herein, PDA coated daikon-based (PDA-DK) and PPy coated daikon-based (PPy-DK) PTMs have been exploited for solar steam generation. When polyethylene foam (PEF) was used as an insulating layer to limit heat loss from the PTMs to bulk water, the evaporation rate of PDA-DK and PPy-DK was raised from 0.82 kg m–2 h–1 and 0.96 kg m–2 h–1 to 1.50 kg m–2 h–1 and 1.60 kg m–2 h–1, respectively. Meanwhile, the corresponding photothermal conversion efficiency was increased to 89.01% and 98.97%, which was increased by nearly 40% under 1-sun irradiation. In addition, PDA-DK and PPy-DK exhibited remarkable stability for the solar steam generation without significant change through 15 cycles. Furthermore, PDA-DK and PPy-DK could effectively desalt seawater and purify dyeing wastewater. All the results indicate that PDA-DK and PPy-DK have great potential in real-world applications for solar steam generation.

The paper describes and analyzes the performance of a new thermoelectric generation system based on the use of Peltier cells inserted in the ducts of the air conditioning equipment. The hot and cold air streams that flow in the two separated sections of an air conditioning system are used to create a thermal gradient between the two faces of the Peltier cells. Hot and cold air flow inside the A/C unit are driven to a built in thermal chamber where the Peltier cells are placed. Peltier cells are incrusted into an insulation wall that separates the two sections of the chamber through which hot and cold air streams are flowing. The so designed configuration allows the Peltier cells to generate electric current. The study has been run for constant cold air temperature and variable hot air temperature, resulting in a variable performance of the thermoelectric generator. Theoretical study has been completed with experimental tests to determine real performance of the thermoelectric unit. Efficiency of the thermoelectric generator has been found to be linearly dependent on the temperature difference between hot and cold air subsections of the chamber. Maximum efficiency, however, is limited by the hot air stream temperature, since in real conditions ambient temperature cannot overpasses a specific value. For standard operational conditions, 5º C and 45º C for the cold and hot air streams, the thermoelectric generator operates at 44% of the maximum efficiency attainable.

Current sources play an essential role in tissue excitation used in bioelectrical impedance spectroscopy. Most investigations use Howland current sources that, despite their practicality and simplified implementation, have operating frequency limitations and dependence on the load impedance due to theirs narrow output impedance, specially at higher frequencies. The objective of this work is to propose model for a robust current-controlled sinusoidal oscillator. The oscillator is based on fully analog electronics, which enables controlling oscillation phase and amplitude by using a voltage reference. The mathematical model is based on Pyragas control application to the classical harmonic oscillator. From the modelling process, it was build an oscillator topology based on second-generation current carriers and on transconductance amplifiers. The reference signal (Fsync) was a sinusoidal voltage source having a frequency of 1MHz and an amplitude of 1Vpp. The oscillator output current synchronized the oscillations’ phase and amplitude with Fsync, regardless of their magnitude before the control signal acted in the circuit at t≈13.5μs. SPICE simulations using ideal components have confirmed the successful operation of the proposed oscillator. This type of oscillator can be implemented in SOIC, then allowing oscillation control interface with logic circuits.

The Convective Rainfall Rate from Cloud Physical Properties (CRPh) for Meteosat Second Generation Satellites is a day-only precipitation algorithm developed at the Spanish Meteorological Agency (AEMET) for EUMETSAT’ Satellite Application Facility in support to Nowcasting and Very Short Range Forecasting (NWC SAF). It is therefore mainly intended to provide input for monitoring and near-real-time forecasts for the next few hours. This paper critically discusses the theoretical basis of the algorithm with special emphasis in the empirical values and assumptions in the microphysics of precipitation and compares the performances of the CRPh with its antecessor, the Convective Rainfall Rate algorithm (CRR), using an object-based method. The analyses show that AEMET’s CRPh is physically consistent and that outperforms the CRR. The applicability of the algorithm for nowcasting and the challenges to evolve the product to an all-day algorithm are also presented.

The study aims to analyze the characteristic parameters of rooftop photovoltaic (PV) power generation on industrial plant buildings in the Ningxia region of China, in order to evaluate the impact of passive design characteristic parameters on the benefits of PV power generation and determine the degree of impact of different passive design characteristic parameters. The methodology involves analyzing the characteristics of existing industrial plant buildings in Ningxia, China, and conducting a series of regional studies on the parameters of plant PV power generation influencing factors. The simulation results revealed that five features, including roof form, PV panel laying pattern, PV panel laying area, azimuth angle, and PV module material, have a significant impact on PV power generation benefits of industrial plant buildings.The study further uses MATLAB 2022b to build a backpropagation neural network model with 5 neurons in the implicit layer to predict the PV power generation benefits. The model calculates the whole-life cycle power generation benefits and the whole-life cycle reduction of carbon emissions as output data. Finally, the Mean Impact Value (MIV) method is employed to select the feature parameter values one by one within their range, and the passive design feature parameters that have the greatest influence on the prediction results are identified as the PV panel laying method, the PV panel tilt angle, and the PV material parameters, respectively.

This study addresses the motivations behind Generation Z's attendance at conferences and aims to contribute to a better understanding of their conference participation behavior. The study identified six latent factors that influence conference attendance motivation: Green and Digital Conference Experience, Educational and professional opportunities, Conference costs, Destination and conference stimuli, Stimulating factors, and Conference accessibility. These factors align with Generation Z's unique characteristics and preferences, such as their environmental consciousness, reliance on digital technologies, desire for continuous learning, career advancement, and experiences. The study also found that destination characteristics and educational and professional opportunities are significant motivators for Generation Z's conference attendance across different cultural contexts. Additionally, Generation Z's strong interest in sustainability and financial challenges highlights the need for eco-friendly practices and affordable registration fees to make conferences more appealing and accessible. The study further explores the impact of socio-demographic characteristics, revealing the gender and past conference attendance differences in motivation. Finally, the study discusses the implications for the conference industry and suggests areas for future research to enhance the understanding of conference attendance motivation among Generation Z.

Zambia recently experienced extended hours of load shedding due to reduced hydroelectricity generation attributed to poor rainfall patterns. The inability to meet energy demand has influenced the government to consider alternative energy sources. This study aims to assess the economic feasibility of the eight sites using a 25-turbine layout for a 4 MW generic wind turbine at 130m hub height. An economic evaluation mathematical model was developed to analyze the economic feasibility using net present value, simple payback period, internal rate of return, and levelized cost of electricity (LCOE). The study shows that the Lusaka wind farm was the most economical with 386 GWh energy yield analysis (EYA), wind speed of 8 m/s, NPV of 316 million dollars, SPP of 2.9 years, IRR of 82%, and LCOE of $0.182/ kWh. The results also show that the other seven sites are economically feasible, with Petauke being the lowest. The study's economic sensitivity analysis conducted by varying the average electricity tariff shows that Lusaka was the most financially viable site. Therefore, policymakers should develop cost-reflective feed-in tariff (FiT) schemes and power purchase agreements for the country to have cost-reflective electricity tariffs that will motivate independent power producers to invest in Zambia.

We discuss a formalism which allows for the calculation of a higher harmonic current response to an applied electric field for disordered superconducting systems described on the basis of tight-binding models. The theory is based on an expansion of the density matrix in powers of the field amplitudes where we solve the equation of motion for the individual components. This allows the evaluation of higher order response functions on significantly larger lattices than one can achieve with a previously used approach, which is based on a direct temporal integration of the equation of motion for the complete density matrix. In case of small lattices, where both methods can be applied by including also the contribution of collective modes, we demonstrate the agreement of the corresponding results.

A sufficient amount of tissue sample is required to perform next-generation sequencing (NGS) with a high success rate, but the majority of patients with advanced non-small-cell lung cancer (NSCLC) are diagnosed with small biopsy specimens. Biopsy samples were collected from 184 patients with bronchoscopically diagnosed NSCLC. The tissue surface area, tumor cell count, and tumor content rate of each biopsy sample were evaluated. The impact of the cut-off criteria for the tissue surface area (≥ 1 mm2) and tumor content rate (≥ 30%) on the success rate of Oncomine Dx Target Test (ODxTT) was evaluated. The mean tissue surface area of the transbronchial biopsies was 1.23 ± 0.85 mm2 when small endobronchial ultrasonography with a guide sheath (EBUS-GS) was used, 2.16 ± 1.49 mm2 with large EBUS-GS, and 1.81 ± 0.75 mm2 with endobronchial biopsy (EBB). The proportion of samples with a tissue surface area of ≥ 1 mm2 was 48.8% for small EBUS-GS, 79.2% for large EBUS-GS, and 78.6% for EBB. Sixty-nine patients underwent ODxTT. The success rate of DNA sequencing was 84.1% and that of RNA sequencing was 92.7% over all patients. The success rate of DNA (RNA) sequencing was 57.1% (71.4%) for small EBUS-GS (n = 14), 93.4% (96.9%) for large EBUS-GS (n = 32), 62.5% (100%) for EBB (n = 8), and 100% (100%) for endobronchial ultrasound-guided transbronchial needle aspiration (EBUS-TBNA) (n = 15). Regardless of the device used, a tissue surface area of ≥ 1 mm2 is adequate for samples to be tested with NGS.

Efficient alternatives in energy production and consumption are constantly investigated by increasingly strict policies. In this way, the pollutant emissions that contribute to the greenhouse effect reduce and sustainability of the electricity sector increase. With more than a third of the world's energy consumption, buildings have great potential to contribute these sustainability goals. Additionally, with growing incentives in the Distributed Generation (DG) and Electric Vehicle (EV) industry, it is believed that Smart Buildings (SBs) can be a key in the field of residential energy sustainability in the future. In this work, an energy management system in SBs are developed to reduce the power demanded of a residential building. In order to balance the demand and power provided by the grid, microgrids such as Battery Energy Storage System (BESS), EVs and Photovoltaic Generation panels (PV) are used. Here, a Mixed Binary Linear Programming formulation (MBLP) is proposed to optimize the charge and discharge scheduling of EVs and also BESS. In order to show the efficiency of the model, a case study involving three scenarios and an economic analysis is considered. The results point a 65% reduction in peak load consumption supplied by grid and a 28.4% reduction in electricity consumption costs.

Four-wire low voltage microgrids supply one-phase consumers with continuously changing electricity demand. For addressing climate change concerns, governments implemented incentive schemes for residential consumers, encouraging the installation of home PV panels for covering self-consumption needs. In the absence of sufficient storage capacities, the surplus is sold back by these entities, called prosumers, to the grid operator or in local markets, to other consumers. While these initiatives encourage the proliferation of green energy resources, and ample research is dedicated to local market designs for prosumer-consumer trading, the main concern of distribution network operators is the influence of power flows generated by prosumer surplus injection on the operating states of microgrids. The change in power flow amount and direction can greatly influence the economic and technical operating conditions of radial grids. This paper proposes a metaheuristic algorithm for prosumer surplus management that optimizes the power surplus injections using the automated control of three-phase inverters, with the aim of improving the active power losses and balancing the phase voltage profiles. A case study is performed on two real distribution networks with distinct layouts and load profiles and the algorithm shows its efficiency in both scenarios.

Introduction: Indonesia consists of a plural society with different ethnic, religious, racial, skin color, and other cultures. The difference must be understood by everyone, especially the younger generation in the digital age. If the younger generation does not have a sufficient understanding of multicultural education values, it will impact the moral crisis of the Indonesian nation. This research emphasizes the importance of multicultural education to the younger generation to understand the differences (pluralism) in society and respect them. Method: The method uses a qualitative method with the literature review method by collecting data on ten journals published in 2019, 2020, 2021. Results: The rise of socio-cultural conflicts in Indonesia is why applying multicultural values to the younger generation. Multiculturalism is needed to establish morals and sensitivity for a young person in the face of various social problems and symptoms at a growing age. Conclusion: Multicultural education is vital to the younger generation considering Indonesia has diverse nations and cultures. The efforts that can make to improve the morale of the nation's children, namely by learning citizenship education and religious education and utilizing information technology to spread things related to the values of multicultural education to the broader community

Lithium-ion batteries (LIBs) have become indispensable energy storage devices for various applications, ranging from portable electronics to electric vehicles and renewable energy systems. The performance and reliability of LIBs depend on several key components, including the electrodes, separators, and electrolytes. Among these, the choice of binder materials for the electrodes plays a critical role in determining the overall performance and durability of LIBs. This review introduces polymer binders that have been traditionally used in the cathode, anode, and separator materials of LIBs. Furthermore, it explores the problems identified in traditional polymer binders and examines the research trends in next-generation polymer binder materials for lithium-ion battery as alternatives.

The positional deviation of the Automatic Emergency Call System (AECS) under collision conditions brings difficulties for post-rescue operations. Currently, there is a lack of analysis on the system operating conditions during collisions in the reliability assessment methods for the Global Navigation Satellite System (GNSS) deployed in AECS. Therefore, this paper establishes an in-vehicle collision environment simulation model for emergency calls to explore the influence of parameters such as temperature and vibration on the data deviation of the simulated GNSS system. We also propose environmental limits applicable to comprehensive AECS tests, which can objec-tively evaluate the reliability of AECS and provide data support for AECS bench test. Through the satellite signal-based semi-physical simulation, AECS is subjected to bench test under different operating conditions. The findings of this study demonstrate that the occurrence of random vibra-tion and impact stress, induced by vibration, exerts considerable disruptive effects on positional signal data during collisions. Consequently, it leads to substantial interference with the accurate detection of post-collision satellite positioning information. When the simulation operates under a 2.4gRMS vibration condition, the maximum phase noise error in the positioning system is 8.95%, which does not meet the AECS test accuracy requirements. On the other hand, the semi-simulation system is less affected by temperature changes, and at the maximum allowable temperature dif-ference of the equipment, the maximum phase noise error in the simulated signal is 2.12%. Therefore, based on the influence of phase noise variation on the accuracy of satellite signal simulation, nec-essary environmental conditions for AECS test are obtained, including the temperature consistent with the maximum operating temperature of the vector generator and the vibration Power Spectral Density (PSD) lower than 1.2gRMS.

Tuning tensor program generation involves navigating a vast search space to find optimal program transformations and measurements for a program on target hardware. The complexity of this process is further amplified by the exponential combinations of transformations, especially in heterogeneous environments. This research addresses these challenges by introducing a novel approach that learns the joint neural network and hardware features space, facilitating knowledge transfer to new, unseen target hardware. A comprehensive analysis is conducted on the existing state-of-the-art dataset, TenSet, including a thorough examination of test split strategies and the proposal of methodologies for dataset pruning. Leveraging an attention-inspired technique, we tailor the tuning of tensor programs to embed both neural network and hardware-specific features. Notably, our approach substantially reduces the dataset size by up to 53% compared to the baseline without compromising Pairwise Comparison Accuracy (PCA). Furthermore, our proposed methodology demonstrates competitive or improved mean inference times with only 25%40% of the baseline tuning time across various networks and target hardware. The attention-based tuner can effectively utilize schedules learned from previous hardware program measurements to optimize tensor program tuning on previously unseen hardware, achieving a top-5 accuracy exceeding 90%. This research introduces a significant advancement in auto-tuning tensor program generation, addressing the complexities associated with heterogeneous environments and showcasing promising results regarding efficiency and accuracy.

In present work, the effects of bioflavonoids (ginkgetin and sciadopitysin) on stimulus-induced superoxide generation, tyrosyl and serine/threonine phosphorylation of proteins in human neutrophils, and the translocation of cytosolic compounds (p47phox, p67phox and Rac) to cell membrane were studied, which were isolated from the needles of Taxus media var. Hicksii. Meanwhile, three normal flavonoids (apigenin, quercetin and isoquercetin) were involved as contrasts. The results indicated that ginkgetin and sciadopitysin were capable of concentration-dependently inhibitory effects on the superoxide generation induced by N-formyl-methionyl-leucyl-phenylalanine (fMLP), arachidonic acid (AA) and phorbol-12-myristate 13-acetate (PMA). And they also suppressed fMLP- and AA- induced tyrosyl or PMA-induced serine/threonine phosphorylation and the translocation of cytosolic compounds (p47phox, p67phox and Rac) to cell membrane, which were in parallel with the suppression of the stimulus-induced superoxide generation. The effect of these compounds on the radical-scavenging was also investigated. Ginkgetin and sciadopitysin did not show remarkable effect on DPPH radical-scavenging activity, and they didn’t display the radical-scavenging activity on superoxide anion generated by phenagine methoxysulfate (PMS)-NADH system. Apparently, ginkgetin and sciadopitysin had great performance in pharmacological value and they are worthy of in-depth study.

The paper presents a thorough examination of the burgeoning field of utilizing manufacturing waste for sustainable energy generation, aligning with the global imperative for resource efficiency and clean energy solutions. With the manufacturing sector being a significant contributor to waste generation, this study explores innovative approaches to transform waste materials into valuable resources, thereby mitigating environmental impacts and contributing to a circular economy. This work critically reviews current trends, emphasizing technological advancements, policy interventions, and market dynamics shaping the manufacturing waste utilization landscape. Noteworthy developments, such as advanced sorting technologies and the integration of digital solutions, are discussed in detail, showcasing their role in enhancing the efficiency of waste management processes. The study outlines future trends in the field, anticipating a shift towards closed-loop systems guided by circular economy principles. This comprehensive review aims to contribute to the discourse on sustainable waste management and energy generation by providing a holistic perspective on the field's current state and offering insights into the future trajectories that will propel manufacturing waste toward a more sustainable and circular future. The synthesis of technological innovation, collaborative efforts, and evolving regulatory frameworks presents a compelling case for the continued exploration of manufacturing waste as a valuable resource in the pursuit of a more sustainable and energy-efficient world.

Computational Fluid Dynamics (CFD) is utilized to study entropy generation for the rarefied steady state laminar 2-D flow of air-Al2O3 nanofluid in square cavity equipped with two solid fins at the hot wall. Such flows are of great importance in industrial applications, such cooling of the electronic equipment’s and nuclear reactors. In the current study, effects of Knudsen number (Kn), Rayleigh number (Ra) and the nano solid particles volume fraction (ϕ) on the entropy generation are investigated. The values of parameters considered in this work are as follows: 0≤Kn≤0.1, 〖10〗^3≤Ra≤〖10〗^6,0≤ϕ≤0.2. Length of the fins (LF) is considered to be fixed and equals to 0.5 m, whereas the location of the fins with respect to the lower wall (HF) is set to 0.25 and 0.75 m. Simulations demonstrate that there is an inverse direct effect of Kn on the entropy generation. Moreover, it is found that when Ra is less than 104, the entropy generation, due to the flow, increases as ϕ increases. In addition, the entropy generation due to the flow will decrease at Ra greater than 104 as ϕ increases. Moreover, the entropy generation due to heat will increase as both the ϕ and Ra increase. In addition, a correlation model of the total entropy generation as a function of all of the investigated parameters in this study is proposed. Finally, an optimization technique is adapted to find out the conditions at which the total entropy generation is minimized

In this paper, we revisit the hydrodynamics supporting the design and development of the RiverCat class of catamaran ferries operating in Sydney Harbor since 1991. More advanced software is used here. This software accounts for the hydrodynamics of the transom demisterns which experience partial or full ventilation, depending on the vessel speed. This ventilation gives rise to the hydrostatic drag, which adds to the total drag of the vessel. The presence of the transom also creates a hollow in the water. This hollow causes an effective hydrodynamic lengthening of the vessel, which leads to a reduction in the wave resistance. Hence a detailed analysis is required in order to optimize the size of the transom. It is demonstrated that the drag of the vessel and the wave generation can be predicted with good accuracy. Finally, the software is also used to optimize the vessel further by means of affine transformations of the hull geometry.

this paper we present approaches for generating random numbers along with potential applications. Rather than trying to provide extensive coverage of several techniques or algorithms that have appeared in the scientific literature, we focus on some representative approaches presenting their workings and properties in detail. Our goal is to delineate their strengths and weaknesses as well as their potential application domains so as the reader can judge what would be the best approach for the application in hand, possibly a combination of the available approaches. For instance, a physical source of randomness can be used for the initial seed, then suitable preprocessing can enhance its randomness and then the output of the preprocessing can feed different types of generators, e.g. a linear congruential generator, a cryptographically secure one and one based on the combination of one way hash functions and shared key cryptoalgorithms in various modes of operation. Then, if desired, the outputs of the different generators can be combined giving the final random sequence. Moreover, we present a set of practical randomness tests which can be applied on the outputs of random number generators in order to assess their randomness characteristics. In order to demonstrate the importance of unpredictable random sequences, we present an application of cryptographically secure generators in domains where unpredictability is one of the major requirements, i.e. eLotteries and cryptographic key generation.

Background : The current corruption case in Indonesia are severely problematic since it is normalized by society. As a response, the current agenda of the Indonesian government to tackle it is by raising awareness of youth towards Indonesia’s corruption case. Aim : This study aims to knowing the importance of anti-corruption education and its applications among students. Method : The methodology of this study is the use of a qualitative survey on Faculty of Pharmacy students and interviews with representatives of students of the Faculty of Pharmacy. The population of this study is students of Airlangga University. The sample of this study is 52 students of class C the Faculty of Pharmacy Result : Students have awareness about corruption and even proposed that the current anti-corruption education is not enough to tackle corruption. Recommendation : The researcher suggests that students can be brave to campaign about the importance of anti-corruption education to the public. Limitation : The limitation of this study is that it is difficult to conduct research because in the online pandemic era, this results in delays in the research process.

Pancasila is the identity of the Indonesian nation, which means that Pancasila is a national characteristic that cannot be found in any country. Pancasila points are taken from the noble values of the Indonesian state. These principles contain culture, customs, and national character known as manners, cooperation, and high nationalism. As the successor to Indonesian culture, the young generation must be able to preserve and develop Pancasila. In this era of globalization, there are many challenges for the younger generation in preserving Pancasila. This study aims to provide an overview of the decline of Pancasila identity among the younger generation due to the impact of globalization. The research question that has been determined is how the practice behaviour of the younger generation towards the implementation of Pancasila, the solutions and efforts that all Indonesian people can make regarding the crisis of Pancasila identity in the era of globalization. This research method uses a literature review. The research sources were conducted from the latest journals and books published in 2019 until 2021 related to the theme of Pancasila and the millennial generation. The results showed that globalization has greatly facilitated foreign cultures to enter Indonesia. The younger generations use this foreign culture as a lifestyle without filtering it, whether it contains Pancasila values or not. This causes Pancasila has been forgotten and no longer applied in their everyday life. Young people can make various efforts to preserve the national identity, namely Pancasila. Apart from the role of the young generation itself, Indonesian society can also play an essential role in supporting the younger generation to continue implementing Pancasila in their lives. By conducting this research, it is hoped that Indonesia's young generation can understand, select, and stay away from the negative impacts of globalization that enter Indonesia freely. The solution that can be given from this research is that the younger generation must love their own culture more and practice every principle in Pancasila. Parents, educational institutions, and the government must also support the younger generation to maintain national identity, Pancasila values. The limitation of this research is that the researcher did not conduct any primary data, which means the data were not directly from the source. This causes the accuracy of this study to be less guaranteed. The recommendation that the researchers can give for further research is to obtain primary data to ensure accuracy and explore research topics regarding the fading of Pancasila identity in the younger generation in this era of globalization.

This paper presents an algorithm for the fully automatic mesh generation for the finite element analysis of ships and offshore structures. The quality requirements on the mesh generator are imposed by the acceptance criteria of the classification societies as well as the need to avoid shear locking when using low degree shell elements. The meshing algorithm will be generating quadrilateral dominated meshes (consisting of quads and triangles) and the mesh quality requirements mandate that quadrilaterals with internal angles close to $90\degree$ are to be preferred. The geometry is described by a dictionary containing points, rods, surfaces and openings. The first part of the proposed method consist of an algorithm to automatically clean the geometry. The corrected geometry is then meshed by the frontal Delaunay mesh generator as implemented in the gmsh package. We present a heuristic method to precondition the cross field of the frontal quadrilateral mesher. Also the influence of the order in which the plates are meshed will be explored as a preconditioning step.

New challenges arise in the face of global climate change which impact every ecosystem on earth, including aquatic systems. This is evident in observations made in regard to the world’s oceans, which show trends of incremental changes in ocean surface temperatures, sea levels, and ocean acidity. These environmental shifts impact human resources such as fisheries and aquaculture. In addition, according to the World Bank, the increase in human population will also require more food and nutrient production, which include industries such as aquaculture. With this increasing demand in aquaculture and fisheries, we must develop efficient and productive methods to operate these industries. We can use genetic methods, specifically transcriptomic information to better understand the biology of our source of nutrition. With the advent of RNASeq techniques, we can provide a better understanding about growth and development, immune function and stress, and adaptations. The use of population genetics or (genomics) to detect Single Nucleotide Polymorphisms (SNPs) between populations or closely related species can provide greater insight from stock structure to fishery-induced evolution. In addition, candidate loci can be investigated further to better understanding evolutionary processes, which provide clues on physiological adaptations and gene expression patterns that can help elucidate how these organisms respond to their current environment. In addition, the use of transcriptomic analyses such as differential gene expression can be used to determine resilience in various environmental conditions such as pollution, hypoxic/anoxic conditions, fluctuations in salinity, and temperature extremes. There has been an increase in transcriptomic studies for many aquaculture species, which has aimed at improving our understanding of growth, development, and metabolism, providing vital information for fisheries and aquaculture industries to make adjustments to environmental conditions such as oxygen availability, nutrition, and salinity. All of these aspects provide insightful information for advancing our knowledge of aquaculture, fisheries and conservation management.

A numerical approach for generating a limited number of water demand scenarios and estimating their occurrence probabilities in a Water Distribution Network (WDN) is proposed. This approach makes use of the demand scaling laws in order to consider the natural variability and spatial correlation of nodal consumptions. The scaling laws are employed to determine the statistics of nodal consumption as a function of the number of users and the main statistical features of the unitary user's demand. Besides, consumption at each node is considered to follow a Gamma probability distribution. A high number of groups of cross-correlated demands, i.e., scenarios, for the entire network were generated using Latin Hypercube Sampling (LHS) and the numerical procedure proposed by Iman and Conover. The Kantorovich distance is used to reduce the number of scenarios and estimate their corresponding probabilities, while keeping the statistical information on nodal consumptions. By hydraulic simulation, the whole number of generated demand scenarios was used to obtain a corresponding number of pressure scenarios on which the same reduction procedure was applied. The probabilities of the reduced scenarios of pressure were compared with the corresponding probabilities of demand.

Generation of unique identifiers extracted from the physical characteristics of the underlying hardware ensures the protection of electronic devices against counterfeiting and provides security to the data they store and process. This work describes the design of an efficient Physical Unclonable Function (PUF) based on the differences in the frequency of Ring Oscillators (ROs) with identical layout due to variations in technological processes involved in the manufacture of the integrated circuit. The logic resources available in the Xilinx Series-7 programmable devices are exploited in the design to make it more compact and achieve an optimal bit-per-area rate. On the other hand, the design parameters can also be adjusted to provide a high bit-per-time rate for a particular target device. The PUF has been encapsulated as a configurable Intellectual Property (IP) module, providing it with an AXI4-Lite interface to ease its incorporation into embedded systems in combination with soft- or hard-core implementations of general-purpose processors. The capability of the proposed RO-PUF to generate implementation-dependent identifiers has been extensively tested, using a series of metrics to evaluate its reliability and robustness for different configuration options. Finally, in order to demonstrate its utility to improve system security, the identifiers provided by RO-PUFs implemented on different devices have been used in a Helper Data Algorithm (HDA) to obfuscate and retrieve a secret key.

Introduction: Pancasila was born as the ideology of the Indonesian nation, which reflects the values cultural values, ethics, morals, and the spirit of the nation. Pancasila was born as a form of national character, which reflects divinity, nationality, unity, togetherness, and justice. The purpose of this research is to know the practice of Pancasila values ​​in the life of the nation and the state. Especially, the implementation of the life of the younger generation in the 21st century today. Methods: This study is literature research where data is collected using keywords in the database. Literature source search carried out with the help of Boolean operators and using the PICOS format. The results of selecting articles, using PRISMA Flow Diagrams. The search results found 125 articles that match the research theme. After checking for duplication, 82 articles were excluded because of the similarity in the results of the discussion. In the end, there were 43 articles used as a literature source. Results: Based on the analysis of research findings, which are supported by literature sources, it shows that the current values ​​of Pancasila are worrying. This can be seen, where people's behavior has been contaminated by external cultures due to technological sophistication. At present, it can be said that the ethics and morals of society do not reflect the values ​​of Pancasila. Conclusion: In order to re-install the values ​​of Pancasila in people's lives, the participation of all parties is necessary. This is especially so, for today's younger generation. Therefore, it is necessary to develop a model for teaching Pancasila to be carried out by schools and colleges. So that later, it can produce a generation of ethics and morals who love the country.

This study investigates the impact of narrow-band terahertz pulses on the ferroelectric order parameter in Ba0.8Sr0.2TiO3 films on various substrates. The 375 nm thick BST film on an MgO (001) substrate exhibits enhanced THz-induced second harmonic generation when excited by THz pulses with a central frequency of 1.6 THz, due to the resonant excitation of the soft phonon mode. Conversely, the BST film on a Si (001) substrate shows no enhancement, due to its polycrystalline state. The 800 nm thick BST film on an MgO (111) substrate demonstrates maximum of second harmonic generation signal when excited by THz pulses at 1.8 THz, that is also very close to it`s soft mode frequency (1.9 THz). Notably, the frequency spectrum of the BST/MgO (111) film reveals peaks at both the fundamental and doubled frequencies, highlighting the quadratic dependence of SHG intensity on the THz pulse's electric field strength.

Ensuring precise segmentation of colorectal polyps holds critical importance in the early diagnosis and treatment of colorectal cancer. Nevertheless, existing deep learning-based segmentation methods are fully-supervised, requiring extensive precise manual pixel-level annotation data, which leads to high annotation costs. Additionally, it remains challenging to train large-scale segmentation models when confronted with limited colonoscopy data. To address these issues, we introduce the general segmentation foundation model—Segment Anything Model (SAM) into the field of medical image segmentation. Fine-tuning the foundation model is an effective approach to tackle sample scarcity. However, current SAM fine-tuning techniques still rely on precise annotations. To overcome this limitation, we propose WSPoly-SAM, a novel weakly-supervised approach for colonoscopy polyp segmentation. WSPoly-SAM utilizes weak annotations to guide SAM in generating segmentation masks, which are then treated as pseudo-labels to guide the fine-tuning of SAM, thereby reducing the dependence on precise annotations data. To improve the reliability and accuracy of pseudo-labels, we have designed a series of enhancement strategies to improve the quality of pseudo-labels and mitigate the negative impact of low-quality pseudo-labels. Experimental results on five medical image datasets demonstrate that WSPoly-SAM outperforms current fully-supervised mainstream polyp segmentation networks on the Kvasir-SEG, ColonDB, CVC-300, and ETIS datasets. Furthermore, by using different amounts of training data in weakly-supervised and fully-supervised experiments, it is found that weakly-supervised fine-tuning can save 70% to 73% of annotation time costs compared to fully-supervised fine-tuning. This study provides a new perspective on the combination of weakly-supervised learning and SAM models, significantly reducing annotation time and offering insights for further development in the field of colonoscopy polyp segmentation.

This paper proposes two fully-automatic machine-extracted linguistic features from an unlimited text input for Mandarin prosody generation. One is the punctuation confidence (PC) which measures the likelihood of inserting a major punctuation mark (PM) at a word boundary. Another is the quotation confidence (QC) which measures the likelihood of a word string to be quoted as a meaningful or emphasized unit in text. Because a major PM in a text is highly correlated with a prosodic break, and a quoted word string plays an important role in human language understanding, the two features potentially could provide useful information for prosody generation. The idea is first realized by employing conditional random field (CRF)-based models to predict major PMs, quoted word string locations, and their associated confidences, i.e., the PC and the QC, for each word boundary. Then, the predicted punctuations and their confidences are combined with traditional contextual linguistic features to predict prosodic-acoustic features. Both objective and subjective tests showed that the prosody generation with the proposed linguistic features performed better than the one without the proposed features. So, the proposed PC and QC are promising features for Mandarin prosody generation.

This work probes the combined effects of magnetic field and viscous dissipation on heat field and examine the second law analysis (entropy generation) in an electrically conducting fluid under the effect of wall mass transfer over continuous stretched non-isothermal surface with variable viscosity. The viscosity of the fluid is assumed to be an inverse linear function of temperature. The governing equation for the problem are changed to dimensionless ordinary differential equations by using similarity transformation and solved numerically by using Rung Kutta and Shooting technique. Velocity, concentration and temperature distribution are obtained and used to compute the entropy generation and the Bejan number in the flow field. The effect of variable viscosity, Schmidt number, Hartman and Reynolds number on the velocity, concentration, temperature, entropy generation and Bejan number are studied and discussed.

Background: Identifying genetic mutations that lead to spermatogenic impairment is essential for offering patients informed genetic counseling and preventing the transmission of genetic defects to their offspring, often through the use of advanced reproductive technologies. Objectives: The purpose of this study was to identify potential single nucleotide polymorphisms (SNPs) associated with male infertility. Methods and Materials: Genetic variants that may cause infertility are identified by combining targeted next generation sequencing (NGS) panel and whole exome sequencing (WES). The validation step of Sanger sequencing adds confidence to the identified variants. Results: Our analysis revealed five distinct affected genes covering seven SNPs: based on targeted NGS panel and WES data, namely SPATA16 (rs16846616, 1515442, 1515441), CFTR (rs213950), KIF6 (rs2273063), STPG2 (r2903150) and DRC7 (rs3809611). Infertile men have a higher mutation rate than fertile men, especially those with azoospermia. Discussion and Conclusions: These findings strongly support the hypothesis that dysfunction of microtubule-related and spermatogenesis-specific genes contributes to idiopathic male infertility. The SPATA16, CFTR, KIF6, STPG2 and DRC7 mutations are associated with male infertility, specifically azoospermia, further examination of this genetic function is required.

- Power grids of the future will likely incorporate more renewable energy distributed generation (REDG), also known as alternative energy systems. REDG units are increasingly being used in electrical transmission networks because to the overall positive effects they have on power networks. REDG systems are the backbone of smart electric networks and are essential to the operation of the smart grid. These REDG systems can additionally improve system reliability by providing some customers with a backup generator in the event of power interruptions. The report offers a thorough evaluation of the existing body of information on the topic of electric vehicles' (EVs') future interactions with the smart grid. The combination of the EVs' potential deployment and the smart grid's conceptual goal presents challenges in electric grid infra-structure, communication, and control. The proposal for connecting EVs to the grid is based on research into cutting-edge smart metering and communication systems. In the context of the vehicle-to-grid (V2G) phenomenon, the possibilities, benefits, and limitations of various EV smart charging systems are also fully examined. There is a fast growing percentage of distributed energy that is wind and solar photovoltaic. Their variable power output, however, introduces fresh challenges for those responsible for organizing, operating, and controlling the power grid. While fluctuations in the electric grid are problematic, they may be mitigated by the entry of EVs into the energy market. As such, we do a comprehensive literature search to learn more about the exciting research gap that needs to be filled and the most recent possible answer that involves EVs. Additionally, we take a close look at the practicality of the sophisticated V2G technology. The smart grid is a developing concept for the world's energy infrastructure, and this study analyzes in depth how EVs interact with it.

This review focuses on the Just Energy Transition (JET) policies of the BRICS member countries, with the aim of finding lessons and possible adoption of some of the key energy policy aspects utilized in other countries for benchmarking for the South African context. Considerations of the present stage of JET in South Africa and the energy-source mix supporting the electricity sector, cognisant of the lifespan and condition of power plants. Analysis of the energy mix revealed that all nations were energy dependent on electricity which was produced by predominantly fossil fuelled power plants with high GHG (concentrating on high CO2 emissions). It was concluded that some of the learnings and lessons learnt from the BRICS countries might be incorporated into a South African energy plan for the transition with options and guidance for formulation of policies. This study will attract responsible environmentally conscious audience that has a commitment and drive to combat global warming and curbing climate change.

We report on the application of femtosecond laser micromachining to the fabrication of complex glass microdevices, for high-order harmonic generation in gas. The three-dimensional capabilities and extreme flexibility of femtosecond laser micromachining allow us to achieve accurate control of gas density inside the micrometer interaction channel. This device gives a considerable increase in harmonics generation efficiency if compared with traditional harmonic generation in gas jets. We propose different chip geometries that allow to control the gas density and driving field intensity inside the interaction channel to achieve quasi-phase matching conditions in the harmonic generation process. We believe that these glass micro-devices will pave the way to future downscaling of High-order Harmonic Generation beamlines.

As one of the world's most populous countries, Indonesia is struggling with the composition of its people, the majority of whom are unemployed productive-age individuals with low education levels. Another issue is the high poverty rate, which is followed by issues of gender inequality. The government cannot solve these social issues on its own. There is a need for community support to solve these problems through sustainable social entrepreneurship activities. Using the Theory of Planned Behavior and Outcome Expectation, this study will determine the factors that influence the interest of individuals known as the Z and Millennial generation, aged 18 to 34 years old, in becoming social entrepreneurs. This study applied a quantitative approach with a judgmental sampling technique to a sample of Generation Z and Millennials who have ever participated in social activities but have not yet started their own business. The study gathered 210 respondents, who were then analyzed using the PLS-SEM method with multiple group analysis generation-based comparison. According to the findings, the Millennial Generation's Attitude Toward Behavior, Subjective Norms, and Outcome Expectation all had a positive impact on Social Entrepreneurial Intention. Meanwhile, Subjective Norms had no effect on Social Entrepreneurial Intention in the Z Generation. Only attitude toward behavior, perceived behavioral control, and outcome expectation have a positive effect on the development of social entrepreneurial intentions. Furthermore, the findings of this study confirm that subjective norms influence attitude toward behavior and Perceived Behavioral Control in both Generation Z and millennials.

As the demands in reliability and high-degree of automation in industrial applications are increasing exponentially, the current Industry 4.0 trend lies in migrating towards smarter technologies that increase flexibility and provide autonomous operation. To tackle this, manufacturers shifted towards Real-Time Ethernet communication which supports autonomous operation, faster sensor/actuator configuration and high degree of determinism. Nevertheless, the uninterrupted operating principle of legacy industrial systems as well as the system complexity and heterogeneity constitutes the transition to Real-Time Ethernet very challenging. This article proposes a novel method allowing to automate the generation of executable code for Real-Time Ethernet architectures based on high-level programming models. The method is based on a programming model and modular code artifacts for the hardware architecture, employing Real-Time Ethernet communication. Through an tool-supported algorithm the high-level model is linked to the architecture's communication primitives and interfaces. The tool-support reduces significantly the development and debugging effort for Real-Time Ethernet applications and increases the application reliability, since the generated code is based on verified programming models. Additionally, the tool creates dedicated files, which allow automated industrial network configuration without any human intervention. Finally, by embedding firewall policies into the code generation process, the method guarantees cyber-resilience for the Real-Time Ethernet architecture. We demonstrate the proposed method in Programmable Logic Controllers (PLCs) of a Public Power Corporation's Hydroelectric Power Plant, which control the temperature and rotor speed of a power generator. The results demonstrate the method's ability to generate rapidly trustworthy and fault-tolerant code for the autonomous plant operation. The hurdles in time and effort for developing, configuring and debugging Real-Time Ethernet applications can be minimized through a high-level programming model that allows automated generation of executable code that is reusable for similar applications. Such time and effort reduction may pave the way towards the Industry 4.0 area.

Induction machines drive many industrial processes, and their unexpected failure can cause heavy production losses. The analysis of the current spectrum can identify online the characteristic fault signatures at an early stage, avoiding unexpected breakdowns. Nevertheless, frequency domain analysis requires stable working conditions, which is not the case for wind generators, motors driving varying loads, etc. In these cases an analysis in the time-frequency domain -such as a spectrogram- is required for detecting faults signatures. The spectrogram is built using the short frequency Fourier transform, but its resolution depends critically on the time window used to generate it: short windows provide good time resolution, but poor frequency resolution, just the opposite than long windows. Therefore, the window must be adapted at each time to the shape of the expected fault harmonics, by highly skilled maintenance personnel. In this paper, this problem is solved with the design of a new multi-band window, which generates simultaneously many different narrow-band current spectrograms, and combines them into a single, high resolution one, without the need of manual adjustments. The proposed method is validated with the diagnosis of bar breakages during the start-up of a commercial induction motor.

The paper investigates experimentally the influence of the Fused Filament Fabrication (FFF) pre-processing strategy on the tribological properties of parts made of PEI (polyetherimide), investigating the difference in the weight loss of the samples caused by abrasive wear before and after the test. The samples were tested for abrasive wear resistance on a tribometer constructed according to ASTM G65/16 (dry sand). Two types of specimen printing orientation along X-axis (lengthwise) and along Z-axis (heightwise) were tested in the study. Three types of path generation strategies were used for manufacturing "X" and "Z" specimens and totally 18 samples were made and tested. Path deposition strategy was carried out with path deposition width of 0.5mm and parallel paths in all slicing layers. In order to reduce the voids in volume, deposition path axes in subsequent layers were shifted by 0.25mm offset. Garnet abrasive Fe3Al2(SiO4)3 was used for this test. The analysis of the experimental data shows the relationship between the samples building direction (X, Z), applied deposition strategies (1X - 3X and 1Z - 3Z) on the resulting resistance to abrasive wear.Keywords: PEI, FFF, path generation strategy, abrasive wear

We present results of the detected voltage distribution of a quantum random number generator based on the photonic integration of semiconductor laser, delay interferometer and photodetector. We find that the integrated system behaves as expected for random number generation from gain-switched laser sources. The biggest advantage is that only electrical connections are needed to operate the system without the need for tricky and expensive optical alignment to external circuitry. We supply results showing that random bit stream created from the random numbers passes the NISTS statistical test suite tests; thus demonstrating the feasibility to generate random number via quantum means at gigabit/s rates from a single photonic integrated circuit. The results are backed by numerical simulations.

The sandwich generation caregivers provide simultaneous care for multiple generations. Caregiving is a dynamic process, and each generation has its unique set of needs. Moreover, studies have indicated a growing population within this group. However, despite extensive research efforts, the caregiving practices employed by the sandwich generation remain inadequately explained. Therefore, the objective of this study was to shed light on the caregiving practices offered by the sandwich generation. The grounded theory approach was selected as the conceptual framework for investigating the research objective. Purposive and snowball sampling methods were utilized to recruit 18 participants from the sandwich generation. The data collected through interviews and observations were analyzed using the 2015 version of Corbin and Strauss methodology. The findings revealed that sandwich generation caregivers are influenced by prominent personality traits, issues related to the elderly, and dependencies and interdependencies within the caregiving process. Sandwich caregivers employ a range of strategies influenced by intervening and background factors. Throughout this process, caregivers encounter both positive and negative consequences. Consequently, policymakers and planners should prioritize the establishment and expansion of support systems for caregiving.

Industrial Control Systems (ICS) are integral to managing and optimizing processes in various industries, including manufacturing, power generation, and more. However, the scarcity of widely adopted ICS datasets hampers research efforts in areas like optimization and security. This scarcity arises due to the substantial cost and technical expertise required to create physical ICS environments. In response to these challenges, this paper presents a groundbreaking approach to generating synthetic ICS data through a data-driven ICS network simulation. We circumvent the need for expensive hardware by recreating the entire ICS environment in software. Moreover, rather than manually replicating the control logic of ICS components, we leverage existing data to autonomously generate control logic. The core of our method involves the stochastic setting of setpoints, which introduces randomness into the generated data. Setpoints serve as target values for controlling the operation of the ICS process. This approach enables us to augment existing ICS datasets and cater to the data requirements of machine learning-based ICS intrusion detection systems and other data-driven applications. Our simulated ICS environment employs virtualized containers to mimic the behavior of real-world PLCs and SCADA systems, while control logic is deduced from publicly available ICS datasets. Setpoints are generated probabilistically to ensure data diversity. Experimental results validate the fidelity of our synthetic data, emphasizing its ability to closely replicate temporal and statistical characteristics of real-world ICS networks. In conclusion, this innovative data-driven ICS network simulation offers a cost-effective and scalable solution for generating synthetic ICS data. It empowers researchers in the field of ICS optimization and security with diverse, realistic datasets, furthering advancements in this critical domain. Future work may involve refining the simulation model and exploring additional applications for synthetic ICS data.

Cancer cells show altered antioxidant defense systems, dysregulated redox signaling, and increased generation of reactive oxygen species (ROS). Targeting cancer cells through ROS-mediated mechanisms has emerged as a significant therapeutic strategy due to its implications in cancer progression, survival, and resistance. Extensive research has focused on selective generation of H2O2 in cancer cells for selective cancer cell killing by employing various strategies such as metal-based prodrugs, photodynamic therapy, enzyme-based systems, nano-particle mediated approaches, chemical modulators, and combination therapies. Many of these H2O2-amplifying approaches have demonstrated promising anticancer effects and selectivity in preclinical investigations. They selectively induce cytotoxicity in cancer cells while sparing normal cells, sensitize resistant cells, and modulate the tumor microenvironment. However, challenges remain in achieving selectivity, addressing tumor heterogeneity, ensuring efficient delivery, and managing safety and toxicity. To address those issues, H2O2-generating agents have been combined with other treatments leading to optimized combination therapies. This review focuses on various chemical agents/approaches that kill cancer cells via H2O2-mediated mechanisms. Different categories of compounds that selectively generate H2O2 in cancer cells are summarized, their underlying mechanisms and function are elucidated, preclinical and clinical studies as well as recent advancements are discussed, and their prospects as targeted therapeutic agents and their therapeutic utility in combination with other treatments are explored. By understanding the potential of these compounds, researchers can pave the way for the development of effective and personalized cancer treatments.

The raw material purchasing (RMP) problem is to determine the purchasing quantities of raw materials in given periods or cycles. Raw material purchasing optimization is crucial for large-scale steel plants because it is closely related to the supply of raw materials and cost savings. The raw material purchasing of large-scale steel enterprises is characterized by many varieties, large quantities, and high costs. The RMP objective is to minimize the total purchasing cost consisting of the price of raw materials, purchasing set-up costs, and inventory costs and meet product demand. We present a mixed integer linear programming (MILP) model and a column generation (CG) solution for the resulting optimization problem. The column generation algorithm is the generalization of the branch & bound algorithm with solving the linear programming (LP) relaxation of MILP using column generation (CG), and its advantage is to handle large-sized MILPs. Experimental results show the effectiveness and efficiency of the solution.

Asphaltene is a component of crude oil that, if mishandled, may create substantial transportation and industrial concerns. It is a solid by nature, with a diverse set of molecular compositions. Furthermore, the oil industry has identified emulsion generation and clogging precipitate as key concerns. The emulsified water droplets in the process are just what give the raw oil its increased viscosity; hence, power is squandered to transport the oil around. The information has been separated into sections based on simulation, solubilization, agglomeration, precipitation, and evidence of model chemicals in the literature. We have included research that investigates the bulk rheology and interfacial rheology of asphaltene to describe its interfacial activity more clearly.

Introduction: Industrial revolution 4.0 in the current era of globalization plays an active role in the modern era in Indonesia. The influence of increasingly advanced technology affects the millennial generation as the nation's next generation to make Pancasila the basis of the State or the foundation of a State. In addition, the millennial generation has begun to shift the guidelines of life from Pancasila so that the appreciation of Pancasila values is starting to disappear along with the development of the times and in line with the progress of Science and Technology (IPTEK). If this continues, then the values of Pancasila will be replaced by a new ideology that will cause behavioural changes in society. Purpose: this study aims to provide the proper application to millennial life using Pancasila values, knowing the behaviour of the millennial generation towards the implementation of Pancasila values, and making Pancasila a way of life. Methods: the method used in this research is Literature Review and takes sources from journals published in 2019 to 2021 related to the Pancasila theme and the millennial generation. Results: the study results show that with the existence of Pancasila as the ideology and principle of the State, it is expected to strengthen the attitude and nature of the community in accepting things outside the norms that exist in Indonesia. In addition, the younger generation is expected to be able to apply Pancasila values along with the development of science and technology in the modern era and current globalization. The research question is how to make the millennial generation implement Pancasila in life in the contemporary period and what solutions can continue to instil Pancasila values ​​in the 4.0 industrial revolution. Recommendation: the conclusion drawn is that Pancasila can become a unifying tool for the nation if the current generation or millennial generation still desires to maintain its values ​​, even though they are in a modern era and many influences from its outside cultures. Limitation: the limitation of this research is not getting all the data directly from the source. The researcher recommends using primary data for the following study to ensure its truth and accuracy better because the researcher directly obtains it.

A novel approach was developed that combined LP-based row generation with optimization-based sorting to tackle computational challenges posed by budget allocation problems with combinatorial constraints. The proposed approach dynamically generated constraints using row generation and prioritized them using optimization-based sorting to ensure a high-quality solution. Computational experiments and case studies revealed that as the problem size increased, the proposed approach outperformed simplex solutions in terms of solution search time. Specifically, for a problem with 50 projects (N = 50) and 2,251,799,813,685,250 constraints, the proposed approach found a solution in just 1.4 seconds, while LP failed due to the problem size. The proposed approach demonstrated enhanced computational efficiency and solution quality compared to traditional LP methods.

The proliferation of devices for the Internet of Things (IoT) and their implication in many activities of our lives have led to a considerable increase in concern about the security of these devices, posing a double challenge for designers and developers of products. On the one hand, the design of new security primitives, suitable for resource-limited devices, that can facilitate the inclusion of mechanisms and protocols to ensure the integrity and privacy of the data exchanged over the Internet. On the other hand, the development of techniques and tools to evaluate the quality of the proposed solutions as a step prior to their deployment, as well as to monitor their behavior once in operation against possible changes in operating conditions arising naturally or as a consequence of a stress situation forced by an attacker. To address these challenges, this paper first describes the design of a security primitive that plays an important role as a component of a hardware-based root of trust, as it can act as a source of entropy for true random number generation (TRNG) or as a physical unclonable function (PUF) to facilitate the generation of identifiers linked to the device on which it is implemented. The work also illustrates different software components that allow carrying out a self-assessment strategy to characterize and validate the performance of this primitive in its dual functionality, as well as to monitor possible changes in security levels that may occur during operation as a result of device aging and variations in power supply or operating temperature. The designed PUF/TRNG is provided as a configurable IP module, which takes advantage of the internal architecture of the Xilinx Series-7 and Zynq-7000 programmable devices and incorporates an AXI4-based standard interface to facilitate its interaction with soft- and hard-core processing systems. Several test systems that contain different instances of the IP have been implemented and subjected to an exhaustive set of on-line tests to obtain the metrics that determine its quality in terms of uniqueness, reliability, and entropy characteristics. The results obtained prove that the proposed module is a suitable candidate for various security applications. As an example, an implementation that uses less than 5% of the resources of a low-cost programmable device is capable of obfuscating and recovering 512-bit cryptographic keys with virtually zero error rate.

Pairs of potential and flow variables have long been established for interfacing object-oriented component models of physical systems. Recently, however, the use of triplets has been discovered for the purpose of robust modeling. New and powerful Modelica libraries have been developed such as the DLR ThermoFluid Stream library or the introduction of the Dialectic Mechanics library. Their use of triplets is entangled with a special modeling approach that uses Linear Implicit Equilibrium Dynamics. In this paper, we study the basic motivation of this approach, its benefits and drawbacks before we finally demonstrate how it beneficially impacts the generation of corresponding simulation code.

“A Picture is worth a thousand words”. Given an image, humans are able to deduce various cause-and-effect captions of past, current, and future events beyond the image. The task of visual commonsense generation aims at generating three cause-and-effect captions (1) what needed to happen before, (2) what is the current intent, and (3) what will happen after for a given image. However, such a task is challenging for machines owing to two limitations: existing approaches (1) directly utilize conventional vision-language transformers to learn relationships between input modalities, and (2) ignore relations among target cause-and-effect captions but consider each caption independently. We propose Cause-and-Effect BART (CE-BART) which is based on (1) Structured Graph Reasoner that captures intra- and inter-modality relationships among visual and textual representations, and (2) Cause-and-Effect Generator that generates cause-and-effect captions by considering the causal relations among inferences. We demonstrate the validity of CE-BART on VisualCOMET and AVSD benchmarks. CE-BART achieves SOTA performances on both benchmarks, while extensive ablation study and qualitative analysis demonstrate the performance gain and improved interpretability.

Ruminal microorganisms play a pivotal role in cattle nutrition. The discovery of the main microbes responsible for enhancing the gain of weight in beef cattle might be used in therapeutic approaches to increase animal performance and cause less environmental damages. Here, we examined differences in bacterial and fungal composition of rumen samples of Braford heifers raised in a natural grassland from Pampa Biome in Brazil. We aimed to detect microbial patterns in the rumen that could be correlated with the gain of weight. 16S and ITS1 genes were amplified from ruminal samples and sequenced to identify the closest microbial relatives within the microbial communities. A predictive model based on microbes responsible for the gain of weight was build and further tested using the entire dataset. The model detected a set of microorganisms associated with animals in the high gain of weight group, including the bacterial taxa RFN20, Prevotella, Anaeroplasma and RF16 and the fungal taxa Aureobasidium, Cryptococcus, Sarocladium, Pleosporales and Tremellales. Most of these organisms have been correlated to the production of substances that improve the ruminal digestion process. These findings provide new insights about cattle nutrition and suggest the use of these microbes to improve beef cattle breeding.

This paper aims to explore how climate change affects electricity generation (fossil-fueled power plants, hydroelectric stations, wind systems and photovoltaics) and energy demand in residential buildings in Greece for the period up to 2050. In both cases RCP scenarios results are considered in the appropriate spatial and temporal dimension. Energy supply technologies were examined through statistical regression models and/or mathematical equations correlating climatic parameters with energy productivity. With respect to energy demand, bottom-up models were developed that integrate behavioral and policy aspects. The analysis showed that climate change is expected to mainly affect electricity generation from hydro and thermal power plants, while the impacts on solar and wind energy are significantly lower. The range of impacts on hydro potential and electricity generation depends on the geographical location of the power plants and shows significant uncertainty due to the corresponding uncertainty in climate models estimates regarding precipitation and runoff changes while showing significant geographical variations. With respect to energy demand, climate change is expected to affect energy consumption, but the expected range of effects depends on both the implementation and the characteristics (deep vs. shallow renovation) of measures for upgrading the thermal performance of the building stock and the intensity of climate change.

In the current era of ‘big data’, scientists are able to quickly amass enormous amount of data in a limited number of experiments. The investigators then try to hypothesize about the root cause based on the observed trends for the predictors and the response variable. This involves identifying the discriminatory predictors that are most responsible for explaining variation in the response variable. In the current work, we investigated three related multivariate techniques: Principal Component Regression (PCR), Partial Least Squares or Projections to Latent Structures (PLS), and Orthogonal Partial Least Squares (OPLS). To perform a comparative analysis, we used a publicly available dataset for Parkinson’ disease patien ts. We first performed the analysis using a cross-validated number of principal components for the aforementioned techniques. Our results demonstrated that PLS and OPLS were better suited than PCR for identifying the discriminatory predictors. Since the X data did not exhibit a strong correlation, we also performed Multiple Linear Regression (MLR) on the dataset. A comparison of the top five discriminatory predictors identified by the four techniques showed a substantial overlap between the results obtained by PLS, OPLS, and MLR, and the three techniques exhibited a significant divergence from the variables identified by PCR. A further investigation of the data revealed that PCR could be used to identify the discriminatory variables successfully if the number of principal components in the regression model were increased. In summary, we recommend using PLS or OPLS for hypothesis generation and systemizing the selection process for principal components when using PCR.rewordexplain later why MLR can be used on a dataset with no correlation

Introduction: The imbalance between technological development and ideological strengthening has resulted in the fading of the Pancasila ideological values of millennials. Technology that accompanies everyday life seems to be the main character in human life. Yet if humans themselves do not use technology wisely, technology can be a threat to both individuals and the life of the nation and state. If technology is increasingly out of control, threats to the Pancasila ideology are very likely to occur, such as in the G 30S PKI incident. Therefore, it is necessary to take action both from the government and the community as individuals to safeguard the development of technology to be used wisely. That way, we can prevent the threat to the Pancasila ideology together. Writing this article aims to analyze how the role and influence of the Pancasila ideology on the millennial generation in the 4.0 industrial revolution and to find solutions so that the values of Pancasila remain attached to the next generation of the Indonesian nation. Method: Writing This article uses a qualitative method by using literature reviews from the results of related research journals that have been published online through websites and other online media. Results: Thirteen journals and one book have met the criteria for the inclusion of a predetermined review. Research is based on the stigma of society regarding technological developments in the Industrial revolution 4.0. Therefore, the government is expected to be more severe in implementing human capital management. Conclusion: By procuring human capital management, it will be possible that Human Resources (HR) in Indonesia will be able to carry out the ideals of a golden Indonesian generation with Pancasila values inherent in the hearts of the people and the nation's future generations.

Plasma cell-free DNA (cfDNA) is frequently analyzed using liquid biopsy to investigate cancer markers. Accordingly, we hypothesized this concept could be applied to the field of exercise physiology. Here, we aimed to identify specific cfDNA (spcfDNA) sequences in the plasma of non-treated human participants using next generation sequencing (NGS) and to clearly define the dynamics regarding the amounts of spcfDNA-fragments upon extreme exercise, such as running a full marathon. NGS analysis was performed using cfDNA of pooled plasma collected from non-treated participants. We confirmed the TaqMan-qPCR assay had a high sensitivity and found the spcfDNA sequence abundance was 16,600-fold higher than a normal genomic region. We then used the TaqMan-qPCR assay to investigate the dynamics of the levels of spcfDNA-fragments upon running a full marathon. Quantities of the spcfDNA fragments were significantly increased post marathon. Furthermore, the amounts of spcfDNA fragments strongly correlated with the numbers of white blood cells and plasma myoglobin concentrations. These results suggest the spcfDNA fragments identified in this study were highly sensitive response markers to extreme physical stress. The findings of this study may provide new insights into exercise physiology and genome biology on the human.