(1) Background: The CEECCA questionnaire assesses the ability to communicate among individuals with aphasia. It was designed using the NANDA-I and NOC standardised nursing languages (SNLs), reaching high content validity index and representativeness index values. The questionnaire was pilot-tested, demonstrating its feasibility for use by nurses in any healthcare setting. This study aims to identify the psychometric properties of this instrument. (2) Methods: 47 individuals with aphasia recruited from primary and specialist care facilities. The instrument was tested for construct validity and criterion validity, reliability, internal consistency, and responsiveness. The NANDA-I and NOC SNLs and the Boston test were used for criterion validity testing. (3) Results: 5 language dimensions explain 78.6% of the total variance. Convergent criterion validity tests showed concordances of up to 94% (Cohen’s κ: 0.9; p<0.001) using the Boston test, concordances of up to 81% using DCs of NANDA-I diagnoses (Cohen’s κ: 0.6; p<0.001), and concordances of up to 96% (Cohen’s κ: 0.9; p<0.001) using NOC indicators. Internal consistency (Cronbach’s alpha) was 0.98. Reliability tests revealed test-retest concordances of 76%-100% (p<0,001). (4) Conclusions: The CEECCA is an easy-to-use, valid, reliable instrument to assess the ability to communicate among individuals with aphasia.

Background: The cumulative number of patients during the COVID-19 pandemic led to a significant shortage of hospital beds. Many patients may not require hospitalization and can be clinically observed in home settings. However, some psychosocial factors are correlated with unsuccessful home isolation (HI), which might negatively affect the transmission control in the community. Therefore, we developed a new psychosocial screening tool (CCPHIET) for assessing HI suitability and examined its validity and reliability.Methods: This cross-sectional descriptive study included COVID-19 patients who were deemed to be medically safe for 14 days of HI. The CCPHIET is comprised of 8 clinical domains pertinent to HI behavioral compliance and risk. We explored its statistical validity and reliability and discussed the potential utility of this tool. Results: A total of 65 COVID-19 patients participated in this study. Most patients (58.5%) were evaluated as good candidates for HI. The CCPHIET has an acceptable content validity (IOC index > 0.5), moderate internal consistency (Cronbach’s alpha = 0.611) and substantial to excellent inter-rater reliability (Intraclass correlation coefficient = 0.944, Cohen’s kappa= 0.627).Conclusions: To compromise between strict and costly absolute institutional quarantine and the potentially unsuccessful absolute HI, the CCPHIET may help to identify good candidates for HI in mild and asymptomatic COVID-19 patients. This psychosocial information would support the physicians in matching each patient to the most suitable setting. Therefore, safe medical care is provided, unnecessary use of medical resources is spared, and local transmission is contained.

Efforts to quantify and reduce greenhouse gas (GHG) emissions of the built environment often neglect embodied emissions, instead focusing on reducing emissions from building operations. Utilizing sustainably sourced mass timber offers low embodied carbon alternatives to traditional concrete and steel structural systems, however the variability in embodied carbon for different mass timber approaches remains understudied. In this study, we used life cycle assessment (LCA) to compare the whole building embodied carbon of nine mass timber design options and two typical concrete and steel reference cases for an eight-story mixed-use building, ensuring structural, acoustic, thermal, programmatic, and fire-rating equivalence between the designs. The study found that the mass timber designs vary significantly, ranging between a 14-52% reduction in whole building embodied carbon from the most impactful reference case, and a 31-73% reduction when considering the structural systems alone. This study demonstrates the value that whole building LCA (WBLCA) provides as a primary driver for low-carbon structural system design and architectural development of mass timber buildings, beyond that of single material comparisons using environmental product declarations (EPDs).

Grading of rice grains has gain attentions due its requirement of quality assessment during import or export. Rice grain quality depends on milling operation, where rice hull is removed with a huller system followed by whitening operation. In such process, adjustment of rollers, control, and operation is important in terms of quality of milled rice. Especially, the basmati rice needed more quality assurance as it is not parboiled rice and exported globally with a high product value. In this present work, the basic problem of quality assessment in rice industry is addressed with digital image processing based technique. Machine vision and digital image processing provide an alternative with the automated, nondestructive, cost-effective, and fast approach as compared with traditional method which is done manually by human inspectors. A model of quality grade testing and identification is built based on morphological features using digital image processing and knowledge based adaptive neuro-fuzzy inference system (ANFIS). The qualities of rice kernels are determined with the help of shape descriptors and geometric features using the sample images of milled rice. The adopted technique has been tested on a sufficient number of training images of basmati rice grain. The proposed method gives a promising result in an evaluation of rice quality with 100% classification accuracy for broken and whole grain. The milling efficiency is also assessed using the ratio between head rice and broken rice percentage and it is 77.27% for the test sample. The overall results of the adopted methodology are promising in terms of classification accuracy and efficiency.

In recent years, the anticipation of sustainable commercial supersonic jet operations has elevated again. Advances in propulsion together with the increased usage of composite materials favour the potential of sustained and cost efficient supersonic commercial operations. However, obstacles remain with regards to the certification of the new supersonic aircraft platforms, while the two main certification bodies EASA and FAA are under pressure to develop certification requirements which will reassure that the supersonic operations are going to have the least possible environmental impact. From a design perspective, past and current research suggests that a trade-off exists between the aircraft performance and the environmental impact, which should be balanced. The current study attempts to balance this trade-off and to conceptually design a SuperSonic Business Jet (SSBJ) by taking into account environmental concerns of the supersonic flight together with design methods that facilitate a sustained supersonic cruise. An environmental impact assessment is undertaken for the SSBJ design and its results are compared to a typical commercial subsonic airliner.

Stroke survivors often face diverse unmet needs, highlighting the significance of identifying and addressing these needs to enhance rehabilitation outcomes and overall quality of life. This study aimed to validate the modified Needs Assessment Questionnaire (mNAQ) as a reliable and valid tool for assessing the needs of stroke patients in the Greek context. Additionally, the research sought to identify potential differences in the assessment of stroke patients' needs based on their stroke phase and National Institutes of Health Stroke Scale (NIHSS) scores. A sample of 71 adult stroke survivors, adhering to World Health Organization guidelines and providing autonomous consent, participated in the study. The mNAQ, comprising 141 items across 12 domains, was uti-lized to evaluate stroke patients' needs. The NIHSS and Barthel Index (BI) were employed for functional independence and mobility assessment. Data analysis incorporated confirmatory fac-tor analysis, exploratory factor analysis, and Cronbach's reliability analysis to establish con-struct validity and internal consistency. Concurrent and known-groups validity analyses were conducted, and Spearman’s rho correlation explored the relationship between mNAQ and BI scores. Non-parametric analyses were applied to identify differences based on stroke phase and NIHSS scores. The study revealed that the mNAQ initially lacked satisfactory psychometric properties in the Greek context. Subsequent modifications, guided by confirmatory and explora-tory factor analyses, resulted in a refined three-factor scale encompassing 31 items in the domains of communication, mobility, and social functioning needs. This adapted measure effectively dif-ferentiated between acute and chronic stroke patients and those with minor and moderate strokes. In conclusion, the validated 31-item Greek mNAQ emerges as a crucial tool for compre-hensively assessing the needs of stroke patients. Its application holds promise for optimizing post-stroke care, improving functional outcomes, and ultimately enhancing the overall well-being and quality of life for stroke survivors.

Extensive use of petrochemical plastic packaging leads to the greenhouse gas emission and con-tamination to soil and oceans, posing major threats to the ecosystem. The packaging needs, hence, are shifting to bioplastics with natural biodegradability. Lignocellulose, the biomass from forest and agriculture, can produce cellulose nanofibrils (CNF), a biodegradable material with ac-ceptable functional properties, that can make packaging among other products. CNF extracted from lignocellulosic wastes can lower the packaging carbon footprint and the production cost. Most of these low value feedstocks go to alternative applications, that make their use in CNF packaging competitive. To transfer the waste materials from current practices to the packaging production, it is imperative to assess their sustainability, encompassing environmental and eco-nomic impacts along with the feedstock physical and chemical properties. A consolidated over-view of these criteria is absent in the literature. This study performs an iterative literature review and presents thirteen attributes, delineating sustainability of lignocellulosic wastes for commer-cial CNF packaging production. These criteria data are gathered for the UK waste streams, and transformed into a quantitative matrix, evaluating the waste feedstock sustainability for CNF packaging production. The presented approach can be adopted to decision scenarios in bioplas-tics packaging conversion and waste management.

The civil construction industry is one of the sectors that most consume natural resources in the world and, consequently, one of that generate more waste. Thinking about constructive techniques that generate less impact on the environment is vital to ensure sustainable development. In this scenario, the Life Cycle Assessment (LCA) has been presented as an internationally recognized approach, that assesses the potential impact of products and services on human health and the environment, throughout its entire life cycle. Aimed to identify construction techniques and vertical closing systems that generate less impact and consumption of natural resources, the impacts generated by the life cycle of the three vertical closing systems most applied in construction sites in Brazil were compared: ceramic brick masonry system (CBr); concrete block masonry system (CBk); and structural blocks masonry system (SBk). The SBk proved to be the least impacting to the “Resource Scarcity”, “Damage to Human Health”, and “Damage to the diversity of Ecosystems” interesting areas. This performance is directly related to the use of cement CPIII type and also by the fact that the SBk consumes less concrete and mortar than the others. Already the "Water Consumption" area, the CBk was the least impacting due to the lower consumption of electricity during its life cycle. The reliability of the results was proven through a sensitivity analysis of the normalization and characterization factors, which consisted of comparing the results obtained by applying two different methodologies. It is believed that the LCA study carried out can assist in the decision-making process regarding the choice of the most sustainable construction method.

As the world grapples with the COVID-19 pandemic, there has been a sudden and abrupt change in global energy landscape. Traditional fossil fuels that serve as the linchpin of the modern civilization have found their consumption rapidly fell across the most categories due to strict lockdown and stringent measures that have been adopted to suppress the disease. These changes consequently steered various environmental benefits across the world in recent time. The present article is an attempt to investigate these environmental benefits and reversals that have been materialized in this unfolding situation due to reduced consumption of fossil fuels. Life cycle assessment tool has been used hereby to evaluate nine environmental impacts and one energy based impact. These impacts include: ozone formation (terrestrial ecosystems), terrestrial acidification, freshwater eutrophication, marine eutrophication, terrestrial ecotoxicity, freshwater ecotoxicity, marine ecotoxicity, land use, mineral resources scarcity and cumulative exergy demand. Outcomes from the study demonstrate that COVID-19 has delivered impressive changes in global environment and life cycle exergy demand with about 11-25% curtailment in all above-mentioned impacts in 2020 in comparison to their corresponding readings in 2019.

Cardiovascular diseases (CVDs) constitute the first cause of death among the population of developing and developed countries. Atherosclerosis, which is a disorder with multifactorial etiopathogenesis, underlies most CVDs. The available literature includes ample research studies on the influence of classic cardiovascular (CV) risk factors. However, environmental exposure to heavy metals, among other substances, is still an unappreciated risk factor of CVDs. This study aimed to assess the concentration of some heavy metals (copper (Cu), zinc (Zn), manganese (Mn), cobalt (Co), and iron (Fe)) in the blood serum of postmyocardial infarction (post-MI) patients and patients free from myocardial infarction (MI) as well as estimate the relationship between the occurrence of MI and increased concentration of heavy metals. The concentration of heavy metals (Cu, Zn, Mn, Co, and Fe) was assessed using the inductively coupled plasma mass spectrometry technique in a group of 146 respondents divided into two groups: post-MI group (study group (SG), n = 74) and group without cardiovascular event (CVE) having a low CV risk (control group (CG), n = 72). The concentration of the analyzed heavy metals was higher in SG. All the heavy metals showed a significant diagnostic value (p < 0.001). The highest value of area under the curve (AUC) was observed for manganese (Mn) (0.955; 95% confidence interval (CI) = 0.922–0.988), while the lowest value was found for zinc (Zn) (0.691; 95% CI = 0.599–0.782). In one-dimensional models, high concentrations of each of the analyzed heavy metals significantly increased the chances of having MI from 7-fold (Cu) to 128-fold (Mn). All the models containing a particular metal showed a significant and high discrimination value for MI occurrence (AUC 0.72–0.92). Higher concentrations of Cu, Zn, Mn, Co, and Fe were found to considerably increase the chances of having MI. Considering the increasingly higher environmental exposure to heavy metals in recent times, their concentrations can be distinguished as a potential risk factor of CVDs.

Animal-based measures are the measure of choice in animal welfare assessment protocols as they can often be applied completely independently to the housing or production system employed. Although there has been a small body of work on potential animal-based measures for farmed crocodilians [1-3], they have not been studied in the context of an animal welfare assessment protocol. Potential animal-based measures, that could be used to reflect the welfare state of farmed crocodilians, were identified and aligned with the Welfare Quality® principles of good housing, good health, good feeding and appropriate behaviour. A consultation process with a panel of experts was used to evaluate and score the potential measures in terms of validity and feasibility. This resulted in a toolbox of measures being identified for further development and integration into animal welfare assessment on the farm. Animal-based measures related to ‘good feeding’ and ‘good health’ received the highest scores for validity and feasibility by the experts. There was less agreement on the animal-based measures that could be used to reflect ‘appropriate behaviour’. Where no animal-based measures were deemed to reliably reflect a welfare criterion nor be useful as a measure on the farm, additional measures of resources or management were suggested as alternatives. Future work in this area should focus on the reliability of the proposed measures and involve further evaluation of their validity and feasibility as they relate to different species of crocodilian and farming system.

In 2020, the early Covid-19 lockdown and social distancing induced the abrupt migration of traditionally presential learning activities to online domains. This “new normal” environment affected management not only of training courses, but also educational events whose main added value consisted in providing students with an interactive experience onsite, as it is the case of inter-institutional summer schools. The following research corresponds to a case study in which our organization, a French university, had to reformulate, in less than three months, one of its traditional summer schools while trying to keep the original goals. We aimed at identifying the impact of four managerial decisions by analyzing, through qualitative and quantitative surveys, students’ perception of gained or lost value regarding four topics: a) online teaching, b) pre-recorded busines cases providers, c) online social events, and d) technical solutions. With an emphasis in both didactics (i.e., knowledge) and pedagogics (i.e., learning experience), the analysis of perceived value allowed as to learn about students’ assessment position, which revealed two main issues at stake: belonging, in relation to students’ identity and academic background, and performing, related to students’ expectations.

We aimed to investigate the ability of children aged 5–14 years old (preschoolers, primary schoolers, and preteens) to assess and anticipate time intervals. 287 Russian children aged 5–14 years old and 26 adults of control group participated in our study. The neuropsychological assessment, Wechsler Intelligence Scale for Children and a battery of time-related tests were applied. All groups of children overestimated the event’s duration, although the accuracy of the second estimations increased among the participants aged 6–8 years after a prompt was offered. A zone of proximal development for time anticipation task was detected for children aged 9-11 years, when the prompt could significantly improve the accuracy of time perception. The participants overestimated the duration of both upcoming and past events, with the degree of overestimation being found to be negatively correlated with age. Further, a higher degree of accuracy in terms of time estimation was found to be correlated with higher scores on the attention and memory tests, and accuracy of time anticipation was associated with scores of praxis test.

This publication aims to disseminate a step-by-step process that walks through the conceptualization and building of a low-cost (~ $150 monitoring device for airborne fine particulate matter (PM2.5), based on miniaturized sensors and components. Details on the implementation of the hardware and software are provided which facilitate the data acquisition, capture and analysis. The central components and their setup discussed in what follows include: the sensor device (called “P.ALP” – Ph.D. Air quality Low-cost Project), Arduino IDE (Integrated Development Environment) and R code (open-access software). A monitoring device for PM2.5, using low-cost sensors and technologies was successfully conceptualized, designed, and implemented. The P.ALP monitoring system was designed and developed to be a basic device, which can be further customized and implemented using the wide range of low-cost sensors available on the market.

Consideration of climate change in Environmental Impact Assessment (EIA) is a rather novel topic, which became partly mandatory through the revised EU Directive on EIA. Through a mixed-methods approach involving key-actors from EIA practice, decision making and climate adaptation planning, this study presents a transdisciplinary point of view on barriers and opportunities to tackle climate change adaptation in environmental assessment of large-scale projects. It is based on both a retrospective ex-post evaluation of existing practices in Austria and Germany as well as prescriptive examination and development of outcomes for practice through the development of a climate-fit toolkit that supports the incorporation of climate change impacts into EIAs. The scenario analysis applied with a back casting approach provided the opportunity to look beyond limitations related to legal compliance and partly lack of data identified by previous research. Three scenario narratives were elaborated based on nine key impact factors based on literature review, content analysis of EIA documents and interviews with EIA actors. The groups of actors carried out a prioritization of actions towards consideration of climate change in EIA. Finally, the actors were involved in co-production of an online tool-kit for Austrian and German EIA practice.

The number of fishers working on commercial fishing vessels worldwide is approximately 159,800 according to the Food and Agriculture Organization of the United Nations. The International Labour Organization estimates that the mean annual number of deaths during fishing is approximately 24,000. Most guidelines for the prevention of marine accidents have been developed with a focus on vessels involved in international navigation. As these guidelines may have parts that are unsuitable for application in small-scale boats operating in coastal areas, appropriate modifications are required. This study analyzed quantitative data on 1,790 marine accidents that occurred in trap fishery, a globally common type of fishery, and data obtained through a survey of 101 fishers in South Korea. A guideline to reduce the rate of fatal accidents was developed using the Bayesian network, a method used for the analysis of accidents, as suggested in the formal safety assessment protocol. The results of data analysis and the developed guidelines are expected to be beneficial to all fishers involved in trap fishery across many countries worldwide.

As universities increasingly compete to improve students’ experience through investment in their campuses, well-designed Campus Open Spaces (COSs) become a major feature as well as a marketing tool. Well-designed and managed COSs are increasingly attractive to students and increase the number of public visits to university campuses (footfall). Current literature does not provide planners with evidence of what makes a COS add value to the student experiences. As such, this paper aims to find the nexus between the value/cost of COS and the attractiveness to - and enhanced experience of - students. This aim is approached via a three-phase integrative framework and results in a validated assessment model with a ‘COS Exp score’ that quantifies the most used/vital, best used/engaging, and most valued/beneficial COS. The data was gathered from in-depth analysis of 21 universities in the UK & USA. The conclusion offers valuable insights into improving experience-based outdoor space developments.

The study aimed to develop standards for a welfare assessment protocol, by validating potential categorisation thresholds for assessment of beef farms in various beef cow-calf production systems in Namibia. Forty measures combined from a New Zealand-based protocol plus Namibia-specific measures, were applied on 55 beef farms (17 commercial farms, 20 semi-commercial and 18 communal village farms) during pregnancy testing, and a questionnaire guided interview. The categorised measures on a 3-point welfare score of 0: good 1: marginal and 2: poor/unacceptable welfare were subsequently compared with derivation of thresholds based upon the poorest 15% and best 50% of herds for each measure. Overall combined thresholds of continuous measures across the 3 farm types, showed 10/22 measures that posed welfare compromise across Namibia, where commercial farms had 4/22 measures and semi-commercial and communal village farms had 12/22 and 11/22 respectively with high thresholds. Most measures-imposed thresholds were retained because of significant importance to welfare of animals and preventiveness of the traits, while leniency was given to adjust good feeding and mortality measures to signify periods of drought. Handling measures (fearful, falling/lying) and abrasions thresholds were adjusted to reflect the temporary stress caused by infrequent cattle handling, and faulty yard designs/design and possible cattle breed influence on handling. Hence, the country needs prioritised investigation of underlying contributing factors and remediation to reduce the high thresholds.

Kenya’s construction industry is experiencing exponential growth in tandem with construction trends globally. With the growth experienced in the industry, there has been significant growth in the economy and a 50% contribution to the world’s landfill waste and pollution to the adjacent environment. Globally, the construction industry is among the largest consumers of natural resources and significant contributors to pollution. This has given rise to high pressure to adopt environmentally sensitive approaches in the construction industry to present a competitive advantage. It is, therefore, crucial to address the need for sustainability measures for Landscape Architecture projects to increase knowledge and awareness, create incentives geared towards supporting sustainable practices, and leverage legal instruments and policies. Green construction practices and strategies have positively impacted the environment and the Kenyan construction industry’s social and economic performance. However, there are several barriers to the adoption and improvement of monitoring and evaluation of sustainable practices, thus slowing down the industry in taking charge of sustainability.

The IPCC’s sixth assessment report projects 15% to 43% (44 EJ/y – 310 EJ/y) of global primary energy to be generated by biomass in 2050 across multiple GHG mitigation scenarios. That report also emphasises the importance of electrification to meet GHG reduction targets. With increased reliance on electric power, and increased appeal to biomass, bioenergy for electricity is expected to play a major role in future energy markets. What makes the bioenergy solution more attractive is its reported reasonable Energy Return on Investment (EROI). However, generation at large scale is projected to be greatly dependent on crops and plantations. This shifts the GHG emissions concern to be concerns over land use and other emissions integrated in the bioenergy lifecycle. It is therefore vital to know whether the potential of electricity generation from biomass outweighs environmental impact of bioenergy. This paper evaluates the potential of biomass electricity mainly generated from short rotation woody crops combustion in generating green energy. This is done using the “Green EROI (EROIg)” quantification methodology, which indicates the net energy generated to society after investing in ecosystem maintenance energy (ESME). ESME is a non-monetary weighting mechanism of an entity’s different lifecycle environmental impacts. This study found that the EROIg of bioelectricity is marginally larger than unity when converted to its primary equivalent form (EROIg-PE) which indicates that the technology is somewhat energetically viable if its production was to be green. Three design options were proposed to improve bioenergy’s EROIg performance, these include adding 20% waste wood in the combustion mix, staggered harvesting and plantation to achieve annual harvest and pelletizing wood. This approach appeared to improve the EROIg especially for pelletizing, due to its simultaneous reduction in storage and transport costs, making the production energetically and environmentally viable even at a 1 : 1 secondary : primary ratio with an EROIg of 1.11 and an EROIg-PE of 3.17. We conclude with the discussion of the multiple indirect advantages of growing crops that can be used for energy generation, and a discussion on how this technique can be used alongside others to help them generate cleaner energy while facing the current global climate, biodiversity and waste issues.

The novel coronavirus SARS-CoV-2 likely emerged from a wildlife source with transmission to humans followed by rapid geographic spread throughout the globe and severe impacts on both human health and the global economy. Since the onset of the pandemic, there have been many instances of human-to-animal transmission involving companion, farmed and zoo animals, and limited evidence for spread into free-living wildlife. The establishment of reservoirs of infection in wild animals would create significant challenges to infection control in humans and could pose a threat to the welfare and conservation status of wildlife. We discuss the potential for exposure, onward transmission and persistence of SARS-CoV-2 in an initial selection of wild mammals (bats, canids, felids, mustelids, great apes, rodents and cervids). Dynamic risk assessment and targeted surveillance are important tools for the early detection of infection in wildlife, and here we describe a framework for collating and synthesising emerging information to inform targeted surveillance for SARS-CoV-2 in wildlife. Surveillance efforts should be integrated with information from public and veterinary health initiatives to provide insights into the potential role of wild mammals in the epidemiology of SARS-CoV-2.

The emergence of the COVID-19 pandemic triggered a swift transition to online learning, remote work and an increased demand for proficiency in telehealth and digital health among health professions students as they prepare for their future careers. In responding to the question: “What are the essential constructs and the validity of a digital competence assessment scale for health professions students", this study sought to develop and validate a digital competence assessment scale (DigiCAS-HPS). The present study followed a mixed-methods approach: qualitative methods (phase 1) for generating and refining items in the scale through literature review on digital frameworks, pilot testing and expert review, and quantitative methods (phase 2) including exploratory and confirmatory factor analysis for its validation. The study revealed a two-factor structure, encompassing Digital Communication, Collaboration, and Online Security (Factor 1) and Digital Content Development and Software Mastery (Factor 2), demonstrating strong construct validity and reliability. Regarding differences in digital competence across groups, older and soon-to-graduate students exhibited higher proficiency in digital content development and software mastery. The two critical facets of DigiCAS-HPS scale could tailor training programs and ensure that health professions students are well-prepared for the evolving telehealthcare landscape. This promotes the growth and accessibility of telehealth, which is increasingly vital in the post-COVID-19 new normal era.

The tiered laboratory framework for HIV viral load monitoring accommodates a range of HIV viral load testing platforms, with quality assessment critical to ensure quality patient testing. HIV plasma viral load testing is challenged by the instability of viral RNA. An approach using an RNA stabilizing buffer is described for the Xpert® HIV-1 Viral Load (Cepheid) assay and was tested in remote laboratories in South Africa. EDTA-plasma panels with known HIV viral titres were prepared in PrimeStore molecular transport medium for per-module verification and per-instrument external quality assessment. The panels were transported at ambient temperatures to 13 testing laboratories during 2017 and 2018, tested according to standard procedures and uploaded to a web portal for analysis. A total of 275 quality assessment specimens (57 verification panels and two EQA cycles) were tested. All participating laboratories met study verification criteria (n=171 specimens) with an overall concordance correlation coefficient (ρ_c) of 0.997 (95% confidence interval [CI]: 0.996 to 0.998) and a mean bias of -0.019 log cp/mL (95% CI: -0.044 to 0.063). The overall EQA ρ_c (n=104 specimens) was 0.999 (95% CI: 0.998 to 0.999), with a mean bias of 0.03 log cp/mL (95% CI: 0.02 to 0.05). These panels are suitable for use in quality monitoring of Xpert® HIV-1 VL and are applicable to laboratories in remote settings.

The contribution of readymade garment (RMG) industry is immense behind the rapid development of some countries with emerging economies. This industry is empowering these countries to provide employment opportunities for millions of people. However, the health as well as safety issues of the workers in this industry are often ignored, particularly in these developing countries. In recent times, because of the several undesirable and obnoxious conditions that exist in their working environments, they are vulnerable to various health related problems which are increasing at a staggering rate. The main purpose of this paper is to assess and prioritize the major health related problems faced by these garment workers in these countries where the economy is flourishing. In addition, the main hazards responsible for these health perils are also quantified. Data were collected from three different garment factories situated in different locations of Bangladesh. Thirty workers from each factory rated the frequency and severity of 14 health related issues. The health risks were then assessed and prioritized through risk priority number (RPN). Afterwards, three experts provided their opinion on the main hazards prevalent in the workplace of almost every garment factory in this country. These hazards were grouped into four main classes which are: 1) Physical 2) Ergonomic 3) Chemical and 4) Psychological hazards. The main classes were later divided into sub classes also. Best-worst method (BWM) was then applied to analyze these hazards by assessing their relative weights depending on the experts’ judgement. The results showed that the health issues faced by the workers in three different garment factories varied to some extent. The results obtained from the experts’ opinion indicated that physical hazards in the workplace are the most detrimental ones whereas the chemical hazards were the least harmful.

A pivotal strategy in decarbonizing the transport sector is by transitioning from internal combustion engine vehicles (ICEVs) to electric vehicles (EVs), especially if they are charged with renewable energy. To provide an incentive to the common populace to switch to EVs, cities should set up - or enable or even encourage the private sector to do so - electric vehicle charging stations (EVCS) at multiple and suitably accessible locations. This paper aims to present a digitaltwin-enabled methodology study for selecting the most suitable possible locations to establish EVCS with consideration of the low voltage (LV) network operation in terms of power losses, active and reactive power in EV charging demand and the effect of the EVCS on the transformers, based on examples in Newcastle upon Tyne (England, UK). It also evaluates the most suitable type of charger that could be installed at these locations by studying the estimated traffic, cost and impact of the EVCS on the power grid, both at peak and off hours. This paper demonstrates how digitaltwin technologies, such as the web-based tool AutoDesign by Northern Powergrid and EA Technology and open source Pandapower can be used for identifying the most viable and cost-effective locations to connect EVCSs to a Distribution Network Operators (DNO)’s LV network. The results of the analysis indicate that with the installation of the most suitable type of EVCS in a particular location, the local power grid would not be significantly affected at any hour of the day.

Air pollution poses a significant risk to public health and ecosystems. The use of sophisticated models to simulate the transformation and dispersion of pollutants in the atmosphere is a recognized method to assess air pollution levels and its sources and inform policy decisions for effective mitigation strategies in urban and industrial environments. The reliability of models depends, in part, on the sensitivity to the variance of input parameters, which can introduce uncertainty into the model's predictions. This uncertainty is especially challenging when the input parameters exhibit inherent variability. In this study, we analyse the uncertainty of an integrated emission/dispersion model by evaluating the relationship between input parameters and model outcomes. We uncover new aspects of this relationship while clarifying some previously known dependencies. Wind speed was found to have the most significant effect on calculated concentrations, with small differences leading to substantial concentration variations. The time of day, which reflects prevailing vertical turbulence conditions, was also found to have a notable impact on concentrations, whereas ambient temperature can also significantly influence model’s results. Based on these findings, we offer specific recommendations for regulators and scientists involved in environmental impact assessment to improve the accuracy and reliability of air pollution modelling.

Achieving sustainable development will require improved water management, but the main framework to address it, Integrated Water Resources Management (IWRM), lacks clarity and acceptance among a diverse community of many stakeholders. This creates communication problems and obscures issues that people care about like drinking water and pollution prevention. As a process within IWRM, the concept of water resources assessment also suffers from a lack of clarity, which leads to ambiguity and reports that are too general to lead to action. This lack of acceptance of IWRM and water resources assessment saps support for essential data collection, analysis, and reporting. Clarifying IWRM will require work within the water community and better messaging to stakeholders. Methods for water resources assessment can be clarified by linking outcomes to higher level reporting of policy and issues. Acceptance of the role of water resources assessment can be facilitated by adding it to the management instruments in the IWRM Toolbox. Stovepipes among water management agencies require coordination to achieve this, usually through framework studies. Improved messaging will involve what people and stakeholders care about and will require changed approaches to presentation of outcomes by categories, such as drinking water, pollution prevention, and flood risk reduction. Researchers can report outcomes with technical messaging that trends toward uniform language and definitions and the water resources management community can nudge its media outlets to carry unifying messages.

To ensure sustainability of the future power grid, the rate of expansion of distributed renewable energy resources (DRER) has introduced operational challenges. These includes managing transmission constraints with DRER power injection, dispatching DRER efficiently, managing system frequency and ensuring sufficient reactive power for voltage support. Coupled with the intensification of wildfires, power infrastructure across the United States faces challenges to minimize the impact to maintain system reliability and resiliency. This research embarks on a comprehensive evaluation, beginning with an in-depth historical analysis to delineate regions most susceptible to wildfires. Utilizing a multidimensional approach, the study assesses wildfire-induced risks to power grids, by integrating historical wildfire occurrences, real-time wildfire proximities, Moderate Resolution Imaging Spectroradiometer (MODIS) derived vegetation metrics, and system parameters, by employing Principal Component Analysis (PCA) based optimal weights, leading to the formulation of a novel risk factor model. This risk factor has the potential to be the key to ensuring the resilience of a renewable-rich smart grid when faced with a severe weather event. Our model’s applicability was further verified through an empirical assessment, selecting representative networks from diverse regions, providing insights into the geographical variability of risk factors. Ultimately, this study offers stakeholders and policymakers a comprehensive tool-set, empowering decisions regarding infrastructure investments, grid reinforcements, and strategic power rerouting to ensure consistent energy delivery using risk assessment against wildfire.

Machine Learning techniques can be used to identify whether deficits in cognitive functions contribute to antisocial and aggressive behavior. This paper initially presents the results of tests conducted on delinquent and non-delinquent youths to assess their cognitive functions. The dataset extracted from these assessments, consisting of 37 predictor variables and one target. was used to train three algorithms that aim to predict whether the data corresponds to that of a young offender or a non-offending youth. Prior to this, statistical tests were conducted on the data to identify characteristics that exhibited significant differences in order to select the most relevant features and optimize the prediction results. Additionally, other feature selection methods, such as Boruta, RFE, and Filter, were applied, and their effects on the accuracy of each of the three machine learning models used (SVM, RF, and KNN) were compared. 80% of the data were utilized for training, while the remaining 20% were used for validation. The best result was achieved by the K-NN model trained with 19 features selected by the Boruta method, followed by the SVM model trained with 24 features selected by the filter method.

In the absence of a holistic view of Landscape Sustainability, credible data and consistent information are needed to help decision making and support adaptive management. However, consolidated tools (system of standards and controls) of assessment exist, but show a complexity of the references on one hand, and are mostly qualitative and environmental indicators based on the other hand. This review article deals with the theme of both environmental and landscape indicators in general, the principles and the fundamental definitions. The main models used, the prerequisites and various fields of application are also taken into consideration. Last but not least, various environmental and landscape indicators are presented and compared.

Embryo quality evaluation during in vitro development is vital for the success of assisted reproductive technologies (ART). However, the subjective morphological assessment by embryologists may result in inconsistencies that affect the selection of the best embryo for transfer. To provide a more comprehensive evaluation of embryo quality, we performed the integration of embryo metabolomics with standardized morphokinetic classification. The culture medium of 55 embryos (from 21 couples undergoing ICSI) was collected at two timepoints (day 3 and 5). Samples were split into Good (n=29), Lagging (n=19) and Bad (n=10) according to embryo morphokinetic evaluation. Embryo metabolic performance was assessed by 1H-NMR, monitoring the variation of specific metabolites (pyruvate, lactate, alanine, glutamine, acetate, formate). Adjusted metabolite differentials were observed during the first three days of culture and found to be discriminative of embryo quality at the end of day 5. Pyruvate, alanine, glutamine, and acetate were major contributors to this discrimination. Good and Lagging embryos were found to export and accumulate pyruvate and glutamine in the 3 first days of culture, while Bad embryos consumed them. This suggests that Bad embryos have a less active metabolism than Good and Lagging embryos and these two metabolites as putative biomarkers for embryo quality. This study provides a more comprehensive evaluation of embryo quality and can lead to improvements in ART by enabling the selection of the best embryos. By combining morphological assessment and metabolomics, the selection of high-quality embryos with the potential to result in successful pregnancies may become more accurate and consistent.

Pose estimation has various applications in analyzing human movement and behavior, including providing feedback to users about their movements so they could adjust and improve their movement skills. To investigate the current research status and possible gaps, we searched Scopus and Web of Science for articles that (1) human `body' pose estimation is used and (2) user movement is assessed and communicated. We used either a bottom-up or top-down approach to analyze 20 articles for methods used to estimate human pose, assess movement, provide feedback to users, as well as methods to evaluate them. Our review found that pose estimation systems typically used CNNs while movement assessment methods varied from mathematical formulas or models, rule-based approaches, to machine learning. Feedback was primarily presented visually in verbal forms and nonverbal forms. The experiments to evaluate each part ranged from the use of public datasets to human participants. We found that while there was an improvement, the majority of pose estimation challenges remain. The effectiveness and factors for choosing movement assessment methods for a new context are still unclear. In the end, we suggest that studies about feedback prioritization and erroneous feedback are needed.

Abstract: The need to rapidly reduce GHG has accelerated the adoption of circular models of production. However, this has proved to be a challenging task for SMEs, who lack the financial, organizational and informational capabilities to implement circular business models. In this context, calculating the carbon footprint (CF) of their products could provide the basis for assessing the different circular economy (CE) practices. The aim of this study is to present a CF calculation tool that can be used to calculate the CF of SMEs. The design of the tool was based on the Life Cycle Assessment (LCA) methodology, taking into account the various barriers that SMEs face in adopting CE practices. The tool was tested in a small cheese factory in northern Greece. The pro-duction process was mapped, a GHG inventory was created and the total emissions related to the production of a specific product was estimated. The final aim is to test this tool at a large scale.

The needs for environmental reporting to include positive outcomes considering differences between creation of less harm, benefits and net benefits are explored. To become mainstream, nature-positive development needs positive messaging, measures and metrics to guide, plan and assess urban outcomes. With the accelerating climate crisis and negative messages getting the upper-hand, it’s important to avoid paralysis by bad news. Whilst striving for a nature-positive world, more effort should be on moving beyond zero to qualify and quantify benefits, gains, and regenerative outcomes instead of oscillating around damage and loss sticking points. Life Cycle Benefit Assessment (LCBA) is a method to measure gains in accelerating restoration and climate security. It enables a good news focus as its reach is to quantify and show positive gains beyond the negative and zero loss outcomes. The paper aims to clarify concepts, challenges and quantitative methods then review real-world third-party-certified case studies. Climate security, human wellness and resource viability gains inside safe operating space within planetary boundaries are quantified as positive benefits. Contrary to conventional Life Cycle Impact Assessment (LCIA) LCBA assigns damage and loss as negative debts and benefit as positive gains. It concludes that LCBA offers business and design a new environment assessment tool, with research needed on economic and other outcomes.

Diagnosis of Awake Bruxism (AB) is problematic due to the inability to use continuous recordings during daytime activities. Recently, a new semi-instrumental approach was suggested, viz., an Ecological Momentary Assessment (EMA), with the use of a smartphone application. With the application subjects are requested to report, at least 12 times per day, the status of their masticatory muscle activity (relaxed muscles, jaw bracing without tooth contact, teeth contact, teeth clenching or teeth grinding). The aim of the present study was to compare the EMA to the assessment of AB as defined by a single point self-report. The most frequent condition recorded by the EMA was relaxed muscles (ca. 60%) and the least frequent one - Teeth grinding (0.6 %). The relaxed muscle condition also showed the lowest coefficient of variance over a 7day period of report. Additionally, only the relaxed muscles and the Jaw bracing conditions presented an acceptable ability to discriminate between AB positive and AB negative subjects, as defined by single point self-report questions. The combination between self-report and EMA may have a potential to promote our ability to diagnose AB. We suggest to re-consider the conditions of Teeth contact and Teeth grinding while using EMA to evaluate AB.

The temperature of the indoor environment is important for health and wellbeing especially at the extremes of age. The study aim was to undertsand the relationship between self-reported thermal sensation and extremity skin temperature in care home residents with and without dementia. The Abbreviated Mental Test (AMT) was used to discriminate residents to two categories, those with and those without dementia. After acclimatisation, measurements included: tympanic membrane temperature, thermal sensation rating followed by infrared thermal mapping of non-dominant hand and forearm. Sixty-nine afebrile adults (60-101 years of age) were studied in groups of two to five, in mean ambient temperatures of 21.4^oC-26.6^oC (median 23.6^oC). Significant differences were observed between groups; thermal sensation rating (p=0.02), tympanic temperature (p=0.01), fingertip skin temperature (p=0.01) and temperature gradients; fingertip-wrist p=0.001 and fingertip-distal forearm, p=0.001.

The traditional standards employed for pain assessment have many limitations. One such limitation is reliability because of inter-observer variability. Therefore, there have been many approaches to automate the task of pain recognition. Recently, deep-learning methods have appeared to solve many challenges, such as feature selection and cases with a small number of data sets. This study provides a systematic review of pain-recognition systems that are based on deep-learning models for the last two years only. Furthermore, it presents the major deep-learning methods that were used in review papers. Finally, it provides a discussion of the challenges and open issues.

As organizations are vulnerable to cyber attacks, their protection becomes a significant issue. Capability Maturity Models can enable organizations to benchmark current maturity levels against best practices. Although many maturity models have been already proposed in the literature, a need for models that integrate several regulations exists. This article presents a light web-based model that can be used as a cybersecurity assessment tool for Higher Education Institutes (HEIs) of the UK. The novel Holistic Cybersecurity Maturity Assessment Framework incorporates all security and privacy regulations and best practices that HEIs must be compliant to and can be used as a self-assessment or a cybersecurity audit tool.

This review aimed to update the main aspects of aflatoxin production, occurrence and incidence in selected countries, and associated aflatoxicosis outbreaks. Means to reduce aflatoxin incidence in crops were also presented with an emphasis on the environment-friendly technology using atoxigenic strains of Aspergillus flavus. Aflatoxins are unavoidable widespread natural contaminants of foods and feeds with serious impact on health, agricultural and livestock productivity, and food safety. They are secondary metabolites produced by Aspergillus species distributed on three main sections of the genus (section Flavi, section Ochraceorosei, and section Nidulantes). Poor economic status of a country exacerbates the risk and the extent of crop contamination due to faulty storage conditions that are usually suitable for mold growth and mycotoxin production: temperature of 22 to 29°C and water activity of 0.90 to 0.99. This situation paralleled the prevalence of high liver cancer and the occasional acute aflatoxicosis episodes that have been associated with these regions. Risk assessment studies revealed that Southeast Asian and Sub-Saharan African countries remain at high risk and that, apart from the regulatory standards revision to be more restrictive, other actions to prevent or decontaminate crops are to be taken for adequate public health protection. Indeed, a review of publications on the incidence of aflatoxins in selected foods and feeds from countries whose crops are classically known for their highest contamination with aflatoxins, reveals that despite the intensive efforts made to reduce such an incidence, there has been no clear tendency, with the possible exception of South Africa, towards sustained improvements. Nonetheless, a global risk assessment of the new situation regarding crop contamination with aflatoxins by international organizations with the required expertise is suggested to appraise where we stand presently.

Improving the efficiency of the supply process in prefabricated components is challenging and requires accounting for a variety of risks involved in the management of the suppliers. The purpose of this study is to present a method to account for the systematic trade-offs between several supplier alternatives. A novel framework is presented for the whole assessment of supplier alternatives by taking advantage of the information extracted from customized building information modeling (BIM) and a database required for assessment of impacts. A data library related to assessment criteria for supply alternatives is built to facilitate the storage and sharing of information. Analytic hierarchy process (AHP) is used to select the optimal supplier that is able to provide the most satisfaction for the determined criteria. The proposed framework was also illustrated by the implementation in a mega project. The study implication is that BIM-enabled supplier selection can indeed lead to more benefits and higher values for all stakeholders.

This paper addresses the development of knowledge and assessment-centered learning approaches within a reflective learning framework in a first year physics class in a university faculty. The quality of students’ reflections was scored using a Self-reporting Reflective Learning Appraisal Questionnaire at the end of each learning approach. The results showed the differences between the approaches based on reflections on the learning control through self-knowledge, by connecting experience and knowledge, as well as through self-reflection and self-regulation. Assessment-centered activities fundamentally help students identify aspects of their attitudes towards, as well as regulate, their sustainability learning education.

The social criteria of sustainable development have remained underexplored. Moreover, a large number of green building assessment tool and social sustainability documentations have been developed which, has had a direct impact on social criteria issues, but there seems to be a substantial gap in the study of social criteria in green building assessment tools. In examining the problem facing social sustainability, taking into consideration social sustainability in sustainable development reviews and green building assessment tool towards social aspects. This paper through analysis identified a centripetal conceptual framework composed of seven key components equity, education, participation & control, social cohesion, health & safety, accessibility & satisfaction, and cultural values. The interpretation of the social sustainability in green building assessment tool would impact building practitioners towards implementing social criteria in GBAT. The aim was to identify social categories as well as consider a starting point for the development of an effective social criteria assessment tool for green building.

The province of Jaén (Andalusia, Spain), despite being declared the European territory with the largest number of defensive constructions (castles, fortifications, etc.), has few conservation plans, with many remains included on the Red List of Spanish Heritage ly-ing abandoned. This poses a challenge for landscape conservation and the optimal use of the province’s tourism potential. In this paper we present the early implementation of an ongoing methodological approach designed to alleviate this situation. It takes advantage of data from the Sentinel 2A and 2B satellites, HBIM, RPAS, GIS and fieldwork that will be applied across five archaeological case studies. It has been tested for the first time in the village of Magaña. Three main objectives and phases of this methodological approach have been designed: 1. Preparation of an Environmental Risk Chart with which to answer such ques-tions as “How have climate change, anthropic alterations and environmental characteris-tics affected the state of conservation of certain heritage sites?” 2. Preparation of HBIM models to foster monitorisation and conservation policies for the main archaeological remains and improving their protection based on digital and technological tools. 3. Building a Smart Tourism App for mobile devices aimed at promoting smart tourism by digitalising and virtualising tourist itineraries and archaeological remains. Finally, public administrations will be apprised of the need to implement a conservation policy for cultural assets and their surroundings in a simple, quick and cost-effective man-ner.

Keywords: Biomass pyrolysis, Chemical Looping Combustion, Life Cycle Assessment, Environmental Impacts, Carbon Footprint.

This study evaluates whether a combination of photodiode sensor measurements, taken during laser powder bed fusion (L-PBF) builds, can be used to predict the resulting build quality via a purely data-based approach. We analyse the relationship between build density and features that are extracted from sensor data collected from three different photodiodes. The study uses a Singular Value Decomposition to extract lower-dimensional features from photodiode measurements, which are then fed into machine learning algorithms. Several unsupervised learning methods are then employed to classify low density (< 99% part density) and high density (≥ 99% part density) specimens. Subsequently, a supervised learning method (Gaussian Process regression) is used to directly predict build density. Using the unsupervised clustering approaches, applied to features extracted from both photodiode sensor data as well as observations relating to the energy transferred to the material, build density was predicted with up to 93.54% accuracy. With regard to the supervised regression approach, a Gaussian Process algorithm was capable of predicting the build density with a RMS error of 3.65%. The study shows, therefore, that there is potential for machine learning algorithms to predict indicators of L-PBF build quality from photodiode build-measurements. Moreover, the work herein describes approaches that are predominantly probabilistic, thus facilitating uncertainty quantification in machine-learnt predictions of L-PBF build quality.

Corporate Sustainability has garnered increasing attention within the business community, as corporates communicate to influence its stakeholders for building sustainable relationships. There has been a surge in research exploring its connection to firm performance but, existing studies lack a cohesive and concentrated approach. This study employs scientometric and bibliometric methods to analyse scientific production which signals a scarcity of research from developing countries, indicating a need for greater investigation. Focussing on specific subfields of Corporate Sustainability and Firm Performance, we analyze and narrow down the scope of our study to a focussed sample. Employing use of structured methods and PRISMA Protocol, this scientifically rigorous study, points towards identification of research themes linking sustainability practices to firm performance for achieving business excellence. It goes beyond mapping of literature, thereby establishing linkages to Sustainable Development Goals (SDGs). Our analysis reveals clusters centered on Environmental Performance, Firm Performance, Corporate Sustainability Reporting, Corporate Social Performance and Green Supply Chain Management with significant citations related to various SDGs. We make use of time series analysis to determine the future trends of research in the field. This scientometric and bibliometric analysis study contributes to a more focused understanding of the linkages between corporate sustainability and firm performance, emphasizing the need for cohesive research approaches to address the complexities of sustainable business practices and their implications for financial performance and the economy.

Commercial development of tidal stream energy is hampered by technical and financial challenges, and impeded by uncertainty about potential environmental effects that drive environmental risk assessments and permitting (consenting) processes. The effect of greatest concern for operational tidal stream energy devices is the potential for marine animals to collide with turbine blades, resulting in injury or death. Due to the turbulent and often turbid waters that frequently characterize tidal turbine sites, there is an absence of empirical evidence about collisions with marine animals. This paucity of observations often leads to risk-averse permitting decisions that further restrict the deployment of tidal energy devices that are needed to collect this evidence. This paper relies on the framework of stressors and receptors that is used widely in marine energy studies and outlines a stepwise probabilistic methodology that applies existing knowledge to further elucidate the risk to marine animals from operational tidal turbines. A case study using striped bass from the Bay of Fundy, Canada, accompanies the methodology, to partially demonstrate its application.

To quantitatively estimate the risk of power system operation under extreme rainfall, a multi-scenario stochastic risk assessment method is proposed. First, a scenario generation scheme considering waterlogged faults of power facilities is constructed based on the storm water management model (SWMM) and the extreme learning machine method. These scenarios will be merged to several typical scenario sets for further processing. The outage of power facilities will induce power flow transfer which may consequently lead to transmission lines’ thermal limit violation. Semi-invariant and Gram-Charlier level expansion methods are adopted to analytically depict the probability density function and cumulative probability function of each line’s power flow. The optimal solution is performed by a particle swarm algorithm to obtain proper load curtailment at each bus, and consequently the violation probability of line thermal violations can be controlled within an allowable range. The volume of load curtailment as well as their importance are considered to quantitatively access the risk of power supply security under extreme precipitation scenarios. The effectiveness of the proposed method is verified in case studies based on the IEEE 24-bus system.

Raw rubber production is the sole foundation for the rubber product industry, rendering raw rubber to manufacture essential commodities to mankind such as tires, condoms, surgical gloves, and so forth. Raw rubber production involves various stakeholders; however, literature focusing on the social impacts of raw rubber production and its supply chain has hereto been limited. Social life cycle assessment, a popular tool to assess the social impacts of a product or process and was deployed herein to assess the social profiles of three Sri Lankan raw rubber supply chains (crepe rubber, concentrated latex, and ribbed smoked sheets). The Social Hotspots Database v4 on Sima Pro v9.3 was used for the analysis. Results indicated that Governance and Labour rights & decent work had been affected in its supply chain of fertilizers due to Corruption and Freedom of association & collective bargaining issues, mainly in Belarus, and China. Proposed improvement options to address these touchpoints were found to be effective. For instance, if the importation of K-fertilizer shifted into low risk countries, overall social risks associated with Corruption and Freedom of association & collective bargaining in the supply chains could be reduced by ca. 36% and 25%, respectively. As a result, social risks in the aforesaid impact categories, i.e., Governance and Labor rights & decent work, were reduced by ca. 35-41% and ca. 17-20%, respectively. Such improvements may help positioning the Sri Lankan rubber industry in the sustainability-conscious-world rubber market. Further, the methodical hierarchy developed herein is suggested to adopt in any industry to measure social sustainability subjected to the relevant refinements to the supply chains.

The accelerated pace with which new diagnostic possibilities are produced and the budget re-strictions of the healthcare sector require that the decision-making process of acquiring new technologies becomes systematic in nature. There are some methodologies such as the Health Technology Assessment (HTA) that encompasses technological domains, clinical effectiveness, patient safety, organizational and financial aspects, among others. However, these methods do not contemplate the learning curve (LC) which is a differential factor in operator-dependent technologies. An assessment model was conceived based on the assessment domains of the AdHopHTA project with the addition of LC. The model was validated and calibrated through System Dynamics (SD) and using as case study the assessment of Point-of-care Ultrasound (POCUS) equipment in dengue screening. The model helped identify the influence of the LC and patient demand on the income and costs for the healthcare system regarding dengue screening as well as the cost-benefit indicator. The control charts LC-CUSUM and CUSUM are graphic tools to intuitively assess the learning curve which can be used for real-time monitoring once students reach a certain skill level.

Consumer products contain the chemical substances that threaten human health. The modeling methods and experimental methods have been used to estimate the inhalation exposure concentration by the consumer products. The model and measurement methods have the spatial property problem and time/cost consuming problem, respectively. For solving the problems due to the conventional methodology, this study performed the feasibility of applying CFD for evaluation of inhalation exposure by comparing the experiment results and the zero-dimensional results with CFD results. To calculate the aerosol concentration, the CFD was performed by combined the 3D Reynolds averaged Navier Stoke’s equation and discrete phased model using ANSYS FLUENT. As a result of comparing the three methodologies performed under the same simulation/experimental conditions, we found the zero-dimensional spray model shows approximately 5 times underestimated inhalation exposure concentration when compared with the CFD results and measurement results in near field. Also, the results of the measured concentration of aerosols at five locations and the CFD results at the same location were compared to show the possibility of evaluating inhalation exposure at various locations using CFD instead of experimental method. The CFD results according to measurement positions can predict rationally the measurement results with low error. In conclusion, in the field of exposure science, a guideline for exposure evaluation using CFD was found that complements the shortcomings of the conventional methodology, the zero-dimensional spray model and measurement method.

The fatigue life of concrete is affected by many interwoven factors whose effect is nonlinear. Be-cause of its unique self-learning ability and strong generalization capability, the Bayesian regu-larized backpropagation neural network (BR-BPNN) is proposed to predict concrete behavior in tensile fatigue. The optimal model was determined through various combinations of network parameters. The average relative impact value (ARIV) was constructed to evaluate the correla-tion between fatigue life and its influencing parameters (maximum stress level Smax, stress ratio R, static strength f, failure probability P). ARIV results were also compared with other factor as-sessment methods (weight equation and multiple linear regression analyses). Using BR-BPNN, S-N curves were then obtained for the combinations of R=0.1, 0.2, 0.5; f=5, 6, 7MPa; P=5%, 50%, 95%. The tensile fatigue results under different testing conditions were finally compared for compatibility. It was concluded that Smax has the most significant negative effect on fatigue life; the degree of influence of R, P, and f, which positively correlate with fatigue life, decreases suc-cessively. ARIV is confirmed as a feasible way to analyze the importance of parameters and could be recommended for future applications. The tensile fatigue performance of plain concrete under different stress states (flexural tension, axial tension, splitting tension) does not differ sig-nificantly. Besides utilizing the valuable fatigue test data scattered in the literature, insights gained from this work could provide a reference for subsequent fatigue test program design and fatigue evaluation.

Obtaining classification confidence at the pixel level is a challenging task for accuracy assessment in remote sensing image classification. Among the various methods for estimating classification confidence at the pixel level, interpolation-based methods have drawn special attention in the literature. Even though they have been widely recognized in the literature, their usefulness has not been rigorously evaluated. This paper conducts a comprehensive evaluation of three interpolation-based methods: local error matrix method, bootstrap method, and geostatistical method. We applied each of the three methods to three representative datasets with different spatial resolutions, spectral bands, and the number of classes. We then derive the estimated classification confidence and true classification confidence and compared the results with each other using both exploratory data analysis (bi-histogram) and statistical analysis (Willmott's d and Binned classification quality). The results indicate that the three interpolation methods provide some interesting insights on various aspects of estimating per-pixel classification confidence. Unfortunately, the interpolation assumes that classification confidence is smooth across the space, which is usually not true in practice. In other words, interpolation-based methods have limited practical use.

This study aimed to investigate the occurrence of the artificial sweetener aspartame (E951) in a wide range of foods and beverages sampled by food control authorities in Germany between 2000 and 2022. The dataset was obtained through the Consumer Information Act. The results showed that aspartame was present in a wide range of product groups tested, most commonly in powdered drink bases (84%) and flavored milk drinks (78%). In the solid food groups, the highest mean aspartame content was found in chewing gum (1543 mg/kg, n=241), followed by sports foods (1453 mg/kg, n=125), fiber supplements (1248 mg/kg, n=11), powdered drink bases (1068 mg/kg, n=162), and candies (437 mg/kg, n=339). Liquid products generally had the highest aspartame content in diet soft drinks (91 mg/l, n=2021), followed by regular soft drinks (59 mg/l, n= 574), flavored milk drinks (48 mg/kg, n=207), and mixed beer drinks (24 mg/l, n=40). These results suggest that aspartame is widely used in foods and beverages in Germany and that certain product groups contain higher concentrations of the sweetener than others. However, the levels of aspartame found were generally within the legal limits set by the European Union. These findings provide the first comprehensive overview of aspartame in the German food market and may be particularly useful in informing the forthcoming working groups of the WHO International Agency for Research on Cancer (IARC) and the WHO/FAO Joint Expert Committee on Food Additives (JECFA), which are in the process of evaluating the human health hazards and risks associated with the consumption of aspartame.

Although South Africa is well known for its incredible biodiversity, targeted efforts are still re-quired to accelerate the discovery and description of the still-unknown species in this floristically mega-diverse country. In addition, new species discovery is a new opportunity for the devel-opment of ethnobotanical knowledge. In the present study, we collected data on current knowledge of plant richness in the country and expert taxonomists’ opinions and used statistical modelling technique to predict what might still be missing in South Africa’s flora. According to experts’ opinions and our modelling, we might be missing 1400-1575 plant species in the country. We predicted that we might take 40-45 years to identify and describe these species and that be-tween 64 and 315 taxonomists will be required. The pool of taxonomists who took part in this study have spent a total of R 680 670 000 (US $40 039 411) to describe 419 species. This implies that, in theory, R 1 624 510.74 (US $95 559) was spent, on average, to describe 1 species. At this rate, R 2 558 604 415.00 (US $150 506 142) would be required to describe the 1575 (modelling) or R 2 274 315 036.00 (US $133 783 237) for the 1400 remaining species (expert opinion) in the current context where both full- and part-time taxonomists are committed to biodiversity assessment in the country. It is important to highlight that this estimate does not correspond to what is required specifically for only species description but does integrate all connected activities, e.g., running cost, bursary, salaries, grants, etc. Furthermore, we must bear in mind that these estimates do not account for the possibility of taxonomic revision which, on its own, needs to be funded, nor do they account for molecular laboratory requirement. However, if we consider that 15% of the predicted funds are spent solely on taxonomic activities, this means that we would need ~R243 673 (US$ 14 334) on 1 species. Overall, our study provides an important figure that can inform policy development including funding and recruitment strategies of taxonomists to fuel efforts towards a comprehensive assessment of the unique South Africa’s biodiversity. The implication of new species discovery is that it opens windows for traditional knowledge development.

The article describes the methodology of the experimental analysis of operational and cost-effective assessment using geographic information system (GIS) technologies, as opposed to the assessment of the tourism potential of the nature of the Fergana Valley in Uzbekistan using long term and costly classical approaches. Based on the ArcGIS (10.8) grid index approach of 20 natural geographical indicators of the valley, such as geographical location, relief, climate, hydrographic and biological, the level of tourism comfort was determined and the location of 6 tourist-recreation zones were defined. The level of accuracy of the tourist-recreational zones all situated utilizing GIS technologies was confirmed by field-expedition approaches.

Background: School meals represent a significant supply of nutrients for children in Brazil, especially those in conditions of social vulnerability. Objectives: This study aimed to assess the levels of arsenic (As), cadmium (Cd), and lead (Pb) in meals served in public elementary schools in four municipalities in the state of Bahia, Brazil, and assess the risk posed to children's health. Methods: Ninety-six samples were collected from 16 schools, freeze-dried, and subjected to microwave-assisted digestion. The As, Cd, and Pb levels were determined by graphite furnace atomic absorption spectrometry. The risk assessment was based on calculating each element's hazard quotient (HQ). Results: None of the samples reached or exceeded the tolerable levels for the elements analyzed. Pb was the metal that obtained the most significant result, reaching maximum levels of 39-157 µg.kg-¹. Conclusions: No element exceeded the PTWI proposed by JECFA; thus, the toxic metal content in school meals poses a negligible risk to children´s health.

Post-earthquake fire is considered as a catastrophic secondary disaster to personal and property safety. In this article, an evacuation assessment of a complex rail transit station under the post-earthquake fire for sustainable buildings was conducted from the internal environment and external rescue based on Building Information Modeling (BIM) and Fire Dynamic Simulation (FDS). The internal environment evacuation assessment simulation experiments were conducted in six hypothetical high-risk scenarios. Besides, the external rescue assessment was based on investigation of the route and the rescue time required during different periods of holidays and workdays. The results show that: (1) The influence caused by different size of fire area in the power distribution room is smaller than those in the train at the platform floor. (2) In the case of fire scenarios with the same fire area but different fire locations, the impact on temperature is greater than that on CO concentration in power distribution room. (3) It shows slight differences between single-floor fire and double-floor fire on evacuation of small area fire in power distribu-tion room. Meanwhile, optimized design recommendations are proposed to reduce the risk of emergency evacuation in both internal and external environments of rail transit stations for sustainable future buildings.

Comorbidities can have a cumulative effect on hospital outcomes of care, such as the length of stay (LOS), and hospital mortality. This study examines patients hospitalized with Congestive Heart Failure (CHF), a life-threatening condition, which, when it coexists with a burdened disease profile, the risk for negative hospital outcomes increases. Since coexisting conditions co-interact, with a variable effect on outcomes, clinicians should be able to recognize these joint effects. In order to study CHF comorbidities, we used medical claims data from CMS. After extracting the most frequent cluster of CHF comorbidities, we: (i) Calculated, step-by-step, the conditional probabilities for each disease combination inside this cluster (ii) Estimated the cumulative effect of each comorbidity combination on the LOS and hospital mortality (iii) Constructed (a) Bayesian, scenario-based graphs and (b) Bayes-networks to visualize results. Results show that, for CHF patients, different comorbidity constructs have variable effect on the LOS and hospital mortality. Therefore, dynamic comorbidity risk assessment methods should be implemented for informed clinical decision making in any ongoing effort for quality of care improvements.

Soil quality is related to food security and human survival and development. In recent years, due to the acceleration of urbanization and the increase of abandoned land, land degradation occurs, poor topsoil quality. In this study, the minimum data set (MDS) was constructed through principal component analysis (PCA) to determine the indicator data set for evaluating topsoil quality in Tieling County, China. In addition, the soil quality index (SQI) was calculated to analyze the spatial distribution characteristics and influencing reasons of topsoil quality in Tieling County. The re-sults showed that MDS included total potassium (TK), Clay, zinc (Zn), soil organic matter (SOM), soil water content (SWC), cation exchange capacity (CEC), pH, and copper (Cu). The MDS indicators can well replace all indicators to evaluate the topsoil quality in the study area. The overall soil quality of Tieling County showed a trend of low in the east and high in the west, and gradually increased from the hilly area to the plain area. The evaluation results are consistent with field research, which can provide reference for other topsoil quality evaluation, and it also provide a basis for the formulation of soil quality improvement measures.

Under the “Korean emission trading system in the forestry sector (KETSF)” initiative, the South Korean government has developed several greenhouse gas (GHG) emissions reduction programs that include forestry activities as the cornerstones of the initiative. Forest management is deemed to be a major strategy to implement KETSF; this has been confirmed by most participants in the program, who have shown their preference for forest management projects as the most effective and encouraging strategy to participate in the KETSF program. For a successful implementation of KETSF projects is essential to explore methods that optimize the positive impacts of such strategies, thereby maximizing the economic returns and carbon stocks that result from the implementation of forest management activities. Thus, this study investigated several value-added KETSF projects in South Korea, which included simulated scenarios under two main forest management strategies: one based on an extension of the rotation age, and a second one based on reforestation with new species. Five forest management scenarios were examined and evaluated in their ability to maximize carbon stocks and economic returns. Based on the results, Scenarios 2 and 4 were identified as the best KETSF projects in terms of carbon stock increments. Additionally, the results indicated that projects including reforestation with new species added more economic value than projects that considered an extension of the rotation age. The study also revealed that KETSF projects generated revenue in both scenarios, by either extending the rotation age or by implementing reforestation with new species.

COVID‑19 pandemic, also known as the coronavirus pandemic, has spread rapidly across the globe since the end of 2019 and brought impressive changes in our life and living through partial or full lockdown and reduced anthropogenic activities. Hence, it is imperative to investigate the impacts and consequences of COVID-19 on global eco-system and environment. The present study accordingly addresses the impacts and consequences of COVID-19 by ten environmental indicators; viz., global warming (or greenhouse gas emission), stratospheric ozone depletion, ozone formation (on human health), fine particulate matter formation, smog, ionizing radiation, human carcinogenic toxicity, human non-carcinogenic toxicity, water resource consumption, and effect on human health. The overall study has been performed in agreement with the standard principle and guidelines of life cycle assessment. Worldwide changes in consumption of fossil fuels, viz., petroleum, coal and natural gas, as a result of COVID-19 pandemic, has been the core theme of the study. Outcomes from the study show that COVID-19 has been a ‘blessing in disguise’ for the global environment with most of the above-mentioned indicators declining by approximately 20-30% in 2020 in comparison to the 2019 level.

Presepsin is a diagnostic and prognostic biomarker of sepsis; however, elevated presepsin levels have also been documented without sepsis. This study aims to retrospectively analyze the laboratory parameters and Sequential Organ Failure Assessment (SOFA) score affecting presepsin levels in 567 patients. Some patients with elevated presepsin levels exhibited renal dysfunction or elevation of biliary enzymes despite a low SOFA score. The univariate regression analysis revealed a close correlation between presepsin levels and SOFA score, serum creatinine (CRE), blood urea nitrogen, and biliary enzymes. In addition, a multivariate regression analysis revealed that SOFA score, alkaline phosphatase (ALP), and CRE independently affected presepsin levels significantly. The analysis of covariance (ANCOVA) revealed that presepsin levels were significantly higher in patients with hepatobiliary disease. Besides, we found that patients who presented with the dilatation of intra- or extrahepatic bile ducts and the elevation of ALP or total bilirubin exhibited remarkable high presepsin levels in the bile. Furthermore, the presepsin production in the liver’s Kupffer cells was established by immunostaining in patients who received surgical liver resection. Overall, this study elucidates that biliary enzymes’ elevation affects presepsin levels, presepsin exists in high concentrations in the bile, and is positive in Kupffer cells.

This article investigates if public investments in rural basic infrastructure represent the best strategy for boosting the local economy of rural communities from Romania. The article focuses on one specific program implemented under the Cohesion policy in the framework of the National Plan for Rural Development called Measure 322. Geographically, the research included a sample of rural communes from the North-Western Region of Romania. Moreover, the study also looks at other determinants of local economic development (LED) than infrastructure investments, with a focus on certain feature characterizing Romanian rural communities such as population size, isolation from urban centers, connection with European and national roads networks, educational stock, etc. The research included three steps, namely the construction of the LED Index, a cvasi-experimental research, and a regression model. Our main findings seem to suggest that while investments in infrastructure help the development gap between beneficiaries and non-beneficiaries remains relatively the same. In terms of determinants of LED, percentage of population with a university degree and connection to a European road are the most significant in the Romanian rural context.

The electrification of process industries is one of the main challenges when building a low-carbon society since they consume huge amounts of fossil fuel generating different emissions. Heat pumps are one of the instruments to perform industrial sector of carbon-neutral market players. This paper proposes an approach to improve the economic feasibility of heat pumps within the process plants. Initial energy targeting with Grand Composite Curves was used and supplemented with the detailed design of the evaporator and compressor for different condensation and evaporation pressures. The trade-off between the capital cost of the heat pump and the electricity cost was investigated and optimal configurations were selected. The case study investigates the gas fractioning unit of a polymer plant where three heat pumps were integrated into distillation columns. The results demonstrated that the heat recovery is 174 MW and requires an additional 37.9 MW of electricity to reduce hot utility by 212 MW. The selection of evaporation and condensation pressure of heat pumps allows saving of 21.5 M€/y for 7 years of plant operation.

This study presents the development and pilot implementation of an assessment and shared deci-sion-making methodology called the Gezamenlijk Inschatten van Zorgbehoeften (GIZ), designed for youth (health) care professionals working with children and families. The three-phase approach included a needs assessment, development of the GIZ methodology, and pilot implementation in a preventive youth health care and youth care setting, involving parents, adolescents, and youth (health) care professionals. The needs assessment produced nine criteria that the GIZ methodology needed to meet. Based on these criteria, the GIZ methodology was developed and described using the Template for Intervention Description and Replication (TIDieR). The pilot implementation demonstrated high client engagement, satisfaction, and feasibility in daily practice. The GIZ ap-proach promotes appropriate support for families by improving the joint assessment and shared decision-making process in youth (health) care. This study supports the implementation of GIZ in youth (health) care practice and highlights the need for further focus on implementation and sus-tainability.

Among others, road traffic, industrial emissions, commercial activities, smoking and cooking are considered as major contributing factors for the increasing levels of pollutants in atmosphere. High levels of potentially toxic metals and microbes in atmosphere, especially in indoor air, may pose serious threat to human health. Therefore, concentration and associated health risks of potentially toxic trace metals (Cd, Cr, Cu, Fe, Mn, Pb, and Zn) and their risk to human health, and microbial load in indoor air was assessed using air condition (AC) filter dust samples collected from 5 locations representing residential, agricultural and industrial settings of Eastern Province, Kingdom of Saudi Arabia. The levels of trace metals varied considerably among sampling areas, with the highest levels of Cr and Cd recorded in the Industrial-area sites followed by the Agricultural and Urban-Residential sites. The highest levels of Pb and Fe were found in the Agricultural area sites followed by the Industrial and Urban-Residential area sites. The metals in dust sample, especially Cd, Cr and Pb, showed a considerable health risk through dermal pathway. Among the sites, the highest hazard quotient for these metals was found for Al-Qatif-Industrial areas sites and among the metals it was the highest for Cd. The cancer risk from the metals contained in AC filter dust was negligible. Samples collected from Agricultural and Industrial area sites were substantially contaminated with bacteria and fungi, respectively. Bacterial contaminants were mostly Gram Negative, with considerable antibiotic resistance and haemolytic activity. Thus, indoor air quality as assessed by AC filter dust depicted that a considerable health risk could be posed by the trace heavy metals and microorganisms for a long-term exposure. Furthermore, this study demonstrated that AC filters dust could be a unique and reliable test sample for the assessment of indoor environment.

Background: Telemedicine (interconsultation between primary and hospital care teams) has been operating in the counties of Central Catalonia Bages, Moianès and Berguedà since 2011 in the specialties of teledermatology, teleulcers, teleeyelids and teleaudiometries. For the period until the end of 2019, a total of 52,198 visits have been recorded. Objective: To analyse the differential costs between telemedicine and usual care in a semi-urban environment. Methodology: A cost-minimization evaluation, including direct and indirect costs from a societal perspective, distinguishing healthcare and user’s costs, within a three-month period. Results: Telemedicine saved € 780,397 over the period analysed. A differential cost favourable to telemedicine of about € 15/visit has been observed, the patient being the largest beneficiary of this saving (by 85%) in terms of shorter waiting times and travel costs. From the healthcare system perspective, moving the time spent in a hospital care consultation to primary care is efficient in terms of the total time devoted per patient. In social terms and in this context, telemedicine is more efficient than usual care. Conclusion: Users’ saving of time in terms of consultation and travel is the main driver of interconsultation between primary and hospital care savings in a semi-urban context. The telemedicine service is also economically favourable for the healthcare system, enabling it to provide a more agile service, which also benefits the healthcare professionals.

Biomass-derived carbon dots (CDs) are gaining much interest in recent times as it is a sustainable option with abundant availability, low cost, and tunable luminescence. Herein, we report a simple green synthesis method to produce highly fluorescent CDs from Eucalyptus globulus leaves using the one-pot hydrothermal approach. The fabricated CDs exhibit strong blue fluorescence with an excitation and emission maxima of 340 nm and 442 nm respectively. The highest quantum yield (QY) obtained was 60.7%. Due to its promising optical properties and biocompatibility, CDs can be a potential candidate for biosensing applications. Moreover, we employed a life cycle assessment (LCA) cradle-to-gate approach to study the environmental impacts of the synthesis strategy used for the fabrication of CDs. The results point out that citric acid is a main hotspot in CDs synthesis, regarding environmental impacts in most categories. This justifies the introduction of biomass, which reduces the amount of citric acid, thus leading to a more sustainable synthesis strategy for fabricating CDs.

Pharmacovigilance databases are showing evidence of injury in the context of the COVID-19 modified mRNA shots. According to recent publications, adverse event reports linked to the mRNA COVID-19 products largely point to the spike protein as an aetiological agent of adverse events, but we propose that the platform itself may be culpable. To assess the safety of current and future mRNA vaccines, further analysis on the risks due to the platform itself, and not specifically the expressed antigen. If harm can be exclusively and conclusively attributed to the spike protein, then it is possible that future mRNA vaccines expressing other antigens will be safe. If harms are attributable to the platform itself, then regardless of the toxicity, or lack thereof, of the chosen payload therein, the platform may be inherently unsafe, pending modification. In this work, we examine previous studies of RNA-based delivery by a lipid nanoparticle and break down the possible etiological elements of harm.

The competitiveness of domestic products at the regional or global market is one of the cornerstones of a country’s internationalcompetitiveness. In this regard, the assessment and analysis of the competitiveness of a country’s international trade becomes an important issue. Thus, development and diversification of the export potential of the country is viewed as one of the most important directions of the international trade policy of the given country. Therefore, another important task is the specialization of the country in the most efficient and competitive segments of the economy. The above-mentioned circumstances embody the fact, that the role of quantitative assessment of potential competitive advantages is important, as it allows determining to what extent certain factors influence on the formation of export capacity in the country. The main objective of the study is to determine the role of export competitiveness in the process of competitive advantages formation of a country. This study mainly focuses on quantitative analysis based on the calculation of Balassa index, determining the extent to which a country has a comparative advantage in producing and exporting certain goods. The study presents the example of the Republic of Armenia, the study covers the period between 2002- 2016. Based on the index calculation, it can be determined whether the country has "revealed" comparative advantage or not. The practical significance of the study lies in the fact that its main findings and conclusions arising from it can be used in assessing the export competitiveness of not only Armenia, but also for other countries or groups of countries.The outcomes and implication of the research can be used to improve the competitiveness of goods and services in the global market.

LoRa and its upper layers definition LoRaWAN is one of the most promising LPWAN technologies for implementing the Internet of Things (IoT). Although being a popular technology, several works in the literature have revealed various weaknesses regarding the security of LoRaWAN v1.0 (the official 1st draft). By using all these recommendations from the academia and industry, the LoRa-Alliance has worked on the v1.0 to develop an enhanced version and provide more secure and trustable architecture. The result of these efforts ended-up with LoRaWAN v1.1, which was released on Oct 11, 2017. This manuscript aims at demystifying the security aspects and provide a comprehensive Security Risk Analysis related to latest version of LoRaWAN. Besides, it provides several remedies to the recognized vulnerabilities. To the best of authors’ knowledge, this work is one of its first kind by providing a detailed security analysis related to latest version of LoRaWAN. According to our analysis, end-device physical capture, rogue gateway and replay attacks are found to be threating for safety operation of the network. Eventually, v1.1 of LoRaWAN is found to be less vulnerable to attacks compared to v1.0, yet possesses several security implications that need to be addressed and fixed for the upcoming releases.

When disposing of waste metal resources in landfills, environmental issues such as soil contamination may arise. Recycling these resources not only recovers valuable metals but also mitigates environmental pollution. Platinum (Pt), a valuable metal used in fuel cells for its high water production activity, will see increased future demand as a fossil fuel alternative. This study analyzes the environmental and resource reduction effects of recycled Pt, considering the growing emphasis on its recycling for stable supply and demand of Pt. The environmental impact and resource consumption of recycled Pt with primary Pt (from natural mines) were compared and analyzed using the Life Cycle Assessment (LCA) technique. Results revealed that resource consumption for primary Pt was 8.25E+01 kg Sb-eq./kg, significantly more than the 5.45E+00 kg Sb-eq./kg for recycled Pt. This represents an environmental reduction effect of approximately 93%. In the case of greenhouse gas emissions, primary Pt emitted 1.35E+04 kg CO2-eq./kg, while recycled Pt emitted 6.94E+02 kg CO2-eq./kg, resulting in an environmental reduction effect of approximately 95%. In conclusion, recycling Pt, compared to primary extraction, offers substantial environmental and resource reduction benefits. This study underscores the significance of recycling and highlights the potential environmental improvements achievable through sustainable practices.

Rice cultivation is the main agricultural activity in Asia, and it results in an enormous amount of agricultural waste, that are usually disposed-off by burning, causing serious environmental health and climate problems. Pakistan is the tenth largest producer in the world and the fourth exporter of rice in the world. To date, there are no studies targeting Pakistan’s profile monitoring its contribution in open burning emissions from rice straw waste. This study presents the characterization of PCDD/Fs, PCBs and PAHs emissions from three samples of rice straw collected from the main rice cultivation regions of Pakistan (Punjab, Sindh and Azad Jammu and Kashmir) in relation to the role of metal-based agricultural additives. PCDD/Fs, PCBs and PAHs emissions were quantified using a fixed grid system biomass plant and measuring the macro-pollutants online and sampling the organic micro-pollutants and metals in isokinetic mode, followed by ISO and CEN standards methods. In addition, role of agrochemicals was monitored in terms of metal catalysis resulted in POPs emissions. This study provides the characterization of most relevant group of pollutants (metals, PCDD/Fs, PCBs and PAHs) as a result of agricultural waste combustion. The rice straw samples from AJK showed high values of organochlorine micro-pollutants compared to the values followed by samples from Punjab and Sindh, i.e., respectively, ∑PCDD/F (2594>1493>856 pg/Nm³) and ∑PCB (41>38>30 pg/Nm³). Whereas the organic micro-pollutants ∑PAH, indicators of incomplete combustion (PICs), were recorded high in the samples from Sindh followed by Punjab and AJK. This study supports the idea that the phenomena that lead to the formation of PCDD/F and PCB are influenced not only by poor combustion but also by the presence of metal catalysts or precursors in the burned fuel.

Scientists observe, discover, justify and eventually share their findings with the scientific community. Dissemination is an integral aspect of scientific discovery since discoveries which go unnoticed have no or little impact on science. Today, peer-review is part of this process of scientific dissemination as it contributes proactively to the quality of a scientific article. As the numbers of scientific journals and scientific articles published therein are increasing steady, processes such as the single-blind or double-blind peer review are facing a near collapse situation. In fact, these traditional forms of reviewing have reached their limits and, because of this, are also increasingly considered as unfair, sloppy, superficial and even biased. In this manuscript we propose forms of Post Publication Public Peer Review (P4R) as valuable alternatives to the traditional blind peer review system. We describe how the journal Sci has explored such an approach and provide first empirical evidence of the benefits and also challenges such a P4R approach is facing.

In this paper, the feasibility and potential assessment (PA) of wind power in six different areas MehalMeda, Eneware, DebreBerhan, AlemKetema, GundoMekel, and Majet are investigated. The data is collected from the National Metrological Agency (NMA) in Addis Ababa and from the districts of the case study areas and analyzed using MATLAB and HOMER software. Using the data collected at 10 meter height, wind direction using a wind rose, the wind frequency distribution, and wind turbine characteristics have been analyzed. Moreover, to obtain a more realistic wind potential study, the wind speed at a 10 meter height is extrapolated to a height of 50 meter in order to determine wind speed, wind power density, and wind energy density. The average wind speed of the zone at 10m and 50m heights are 1.58 m/s and 1.99 m/s, 3.06 m/s and 3.85 m/s, 4.75 m/s and 5.98 m/s, 2.29 m/s and 2.88 m/s, 1.01 m/s and 1.27 m/s and 4.07 and 5.12m/s at Alemketema, Debreberhan, Eneware, Gundemeskel, Majete and Mehalmeda respectively. The extrapolated result shows that the maximum wind speed and power densities at a height of 50 meter for Eneware, MehalMeda and Debre Berhan are 10.4 m/s, 689 W/m2, 8.9m/s, 429 W/m2 and 6.3m/s, 152.2 W/m2 respectively. The energy densities at a height of 50 meter for AlemKetema, DebreBerhan, Eneware, GundoMekel, Majete, and MehalMeda are 181.06 kWh/m2*yr , 1332.83 kWh/ m2*yr, 6078.91 kWh/ m2*yr, 857.76 kWh/ m2*yr, 58.78 kWh/ m2*yr, and 3939.42 kWh/ m2*yr respectively. As per the international standard for wind power and wind speed classification, considering the extrapolated height, Eneware, MehalMeda, and DebreBerhan have feasible wind potential for both small-scale and large-scale wind farm implementation, whereas Majete, AlemKetema, and GundoMeskel of the North Shewa Zone in the Amhara region have poor wind potential.

The quality prediction of quaternary structure models of a protein complex, in the absence of its true structure, is known as the Estimation of Model Accuracy (EMA). EMA is useful for ranking predicted protein complex structures and using them appropriately in biomedical research, such as protein-protein interaction studies, protein design, and drug discovery. With the advent of more accurate protein complex (multimer) prediction tools, such as AlphaFold2-Multimer and ESMFold, the estimation of the accuracy of protein complex structures has attracted increasing attention. Many deep learning methods have been developed to tackle this problem; however, there is a noticeable absence of a comprehensive overview of these methods to facilitate future development. Addressing this gap, we present a review of deep learning EMA methods for protein complex structures developed in the past several years, analyzing their methodologies and impacts. We also provide a prospective summary of some potential new developments for further improving the accuracy of the EMA methods.

Radiological risk affect the quality of the environment in buildings since population and workers can be potentially exposed to high level of dose. Radon gas emanated from both subsoil and building materials represents the most important source of radiation exposure for people. This study investigates the sustainability concept of a small rural village of Ischia Island, named Ciglio, in relation to the radiological risk. Radon activity concentration was measured in typical green tuff dwellings and in water samples collected from a local spring using E-Perm devices. Moreover, for green-tuff as building material, the radon emanation coefficient was calculated by gamma spectroscopy. The results highlight the importance to perform environmental radon monitoring and to investigate the radon content of building materials, especially in geographical areas characterized by traditional use of typical stones for constructions. In conclusion, the sustainability development of rural buildings is possible if the radiological risk for inhabitants and workers was assessed.

Green-space resources, in the context of urbanisation, cannot meet the actual needs of residents well, and the study of the balance of green-space resource allocation from the relationship between supply and demand is an urgent problem to be solved. This study quantitatively evaluates the green-space supply level from four dimensions by constructing a framework for assessment in the community life circle. It also evaluates the matching of green space supply and demand, resource distribution fairness, and distribution equilibrium under group differentiation through the supply–demand coupling matrix, Gini coefficient, and the Kruskal–Wallis H non-parametric rank-sum test, respectively. This study shows that (1) a significant spatial imbalance exists in green-space resource allocation in community life circles in different dimensions. (2) The comprehensive green-space supply level in the community life circle matched the total demand of residents to a low degree. (3) There was significant inequality in green-space resource allocation within the community life circle (the Gini coefficient of each evaluation perspective was > 0.4). Based on the study results, we were able to identify community life circles with spatial mismatches, different supply and demand, and other green-space resource allocation problems, which is of great significance to urban green-space research and planning practice under the "green justice" framework.

Building carbon footprint analysis is a key instrument for assessing the impact of different constructions on climate change. Several standards and methodologies are available to calculate the footprint of buildings, including standards and norms, life cycle assessment (LCA), and dedicated software tools. The use of BIM software for these calculations is both scientifically justified and very practical. This scientific publication focusses on the application of a BIM-based research methodology for the analysis of the carbon footprint of a single-family house. The research process included the following steps: (i) design of a single-family house with timber frame construction using Archicad BIM software, (ii) simulation of the building energy performance using the EcoDesigner Star plug-in, (iii) life cycle assessment (LCA) using the plug-in for Archicad, (iv) preparation of a second model with traditional masonry construction for comparison, and (v) comparative analysis of the single-family house models with timber frame and masonry construction. Analysis of the results highlights significant differences in CO2e emissions between masonry and timber buildings and the varying impact of individual elements on the total CO2e emissions of the buildings studied. These findings are relevant for future work on sustainable building design and construction, which aims to minimise negative environmental impacts. The goal of minimising the cumulative carbon footprint of buildings is critical to achieving the Sustainable Development Goals and combating climate change.

While the container crane is an important part of daily port operations, it has received little attention compared with other infrastructures, such as buildings and bridges. Crane collapse due to earthquake affects the operation of the port, and indirectly impacts the economy. This study proposes fragility analyses for various damage levels of the container crane that allow the port owner and partners to better understand the seismic vulnerability presented by container cranes. A large quantity of nonlinear time history analyses was applied for a three-dimensional (3D) finite element model to quantify the vulnerability of the container crane in considering the uplift and derailment behavior. The uncertainty of demand and capacity of the crane structures were also considered through random variables, i.e. elastic modulus of members, ground motion profile, and intensity. The results analyzed in the case of a Korean container crane showed that the probability of exceeding the first uplift with or without derailment is shown before the crane reaches the structure’s limit states. This means that under low seismic excitation, the crane might be derailed without any structural damage. But when the crane reaches the minor damage state, it is always coupled with a certain probability of uplift with or without derailment. This study also proposes the fragility curves developed for different structural periods to enable port stakeholders to assess the risk of their container crane.

Objective: to evaluate the effects of excitatory repetitive transcranial magnetic stimulation (rTMS) of the international 10-20 system P3 point (intraparietal sulcus region) in chronic patients with a frontal lesion and parietal sparing due to stroke on the impaired upper (UL) and lower limb (LL) as measured by Fugl-Meyer Assessment (FMA). Methods: three patients (C1: 49.83/2.75, C2: 53.17/3.83, C3: 63.33/3.08 years-old at stroke/ years post-stroke, respectively) received two weeks (five days/ week) of rTMS at 10 Hz of P3. A patient was treated in similar conditions with a sham coil (S1: 56.58/4.33). No complimentary therapy was delivered during the study. Patients were evaluated before, after- and two months post-treatment (A1, A2 and A3, respectively). Results: we found increased scores for LL in motor function subsection for C1 and C3 and in sensory function for C2 by A2 that remained at A3. We also found an increased score for UL motor function for C2 and C3, but the score decreased by A3 for C2. C3 score for UL range of motion increased by A3 compared to A1 and A2. Conclusion: In a variable way, P3 excitatory rTMS increased FMA scores in different upper and lower limb subsections of our three treated patients.

With growing global concern of food and water insecurity, an efficient method to monitor irrigation projects is essential, especially in the developing world, where irrigation performance is often suboptimal. In Nepal, the irrigated area has not been objectively recorded, although their assessment has substantial implications on national policy, project’s annual budgets, and donor fund-ing. Here we present the application of Landsat images to measure irrigated areas in Nepal for the past 17 years to contribute to the assessment of the irrigation performance. Landsat 5 TM (2006-2011) and Landsat 8 OLI (2013-2022) images were used to develop a machine-learning model which classifies irrigated and non-irrigated areas in study areas. The random forest classification achieved overall accuracy of 82.2% and kappa statistics of 0.72. For the class of irrigation areas, the producer’s accuracy and the consumer’s accuracy were 79% and 96%, respectively. Our regionally trained machine-learning model outperforms the existing global cropland map, highlighting the need of such models for local irrigation project evaluations. We assess irrigation project performance and its drivers by combining long-term changes in satellite-derived irrigated area with local data related to irrigation performance, such as annual budget, irrigation service fee, crop yield, precipitation, and main canal discharge.

Cold brew coffee has emerged as a new trend during the last decade. However, “cold brew” is an extraction style of ground roasted coffee with water at less than body temperature (typically 8°C or room temperature) rather than a beverage per se. Cold brew extraction poses several challenges including the need of specific optimization depending on the multivariate influences of coffee variety and processing, roast degree, grinding, dosage, water composition, turbulence, brew system (drip, immersion etc.), time and temperature. While cold brew is typically characterized by a floral sweetness, over-extraction may lead to abundant acidity and bitterness. To avoid this, an extraction degree of 70% was suggested using rather shorter times (i.e. 2 h at 15°C with 80 g/L coffee with optimized medium roast profiles). Due to the lack of sterilizing temperatures during preparation, cold brew is special in the coffee sector because hygiene and food safety aspects pose specific challenges for food industry. To avoid microbiological contamination and spoilage, cold brew should be as freshly prepared as possible and shelf-life should be minimized.

Disposable absorbent hygiene products have evolved for superior performance, enhancing the convenience of daily lives. Yet the use of disposable hygiene pads has brought safety concerns on chemical exposure, and significant efforts have been made to assess the potential risks associated with use of hygiene pads. This article intends to overview the safety assessment framework of diapers and feminine pads, which includes hazard identification, hazard characterization, exposure assessment, risk characterization, and postmarket risk management. Risk assessment of various constituents are reviewed for quantification methods and conservative estimation of exposure parameters. By reviewing the up-to-date considerations in risk assessment, we aim to provide insightful discussion on safety evaluation of current versions of disposable absorbent products. More clinical testing and postmarket surveillance are needed for continuous monitoring of potential health impacts of advanced products and constituents.

Macrophages are well known for the involvement in the biocompatibility, as well as biodistribution, of nano(bio)materials. Although there are a number of rodent cell lines, they may not fully recapitulate primary cell responses; particularly for those of human cells. Isolation of tissue resident macrophages, from humans, is difficult and may result in insufficient cells with which to determine the possible interaction with nano(bio)materials. Isolation of primary human monocytes, and differentiation to monocyte-derived macrophages, may provide a useful tool with which to study, further, these interactions. To that end, we developed a standard operating procedure for this differentiation, as part of the REFINE project, and used it to measure the secretion of bioactive molecules from M1 and M2 differentiated monocytes in response to model nano(bio)materials, following an initial assessment of pyrogenic contamination which may confound, potential, observations. The SOP was deployed in two partner institutions with, broadly, similar results. The work presented here shows the utility of this assay but, highlights the relevance of donor variability in responses to nano(bio)materials. Whilst donor variability can provide some, logistical, challenges to application of such assays, this variability is much closer to the heterogeneous cells that are present in vivo, compared to homogeneous, non-human, cell lines.

Attention to the work-related musculoskeletal disorders (WMSDs) involve also statistical surveys showing an increasing trend in the incidence of WMSDs. Technological development retrieves new tools and methods for the assessment of physical load at work. In addition to the conventional questionnaires and scaling assessment systems, these methods are mostly based on the direct sensing of appropriate parameters, which allows more precise quantification. The aim of this paper is to compare the assessment of ergonomic risk through current legislative regulations. A Captiv wireless sensor system was used at a car headlight quality control assembly workplace for sensing, data acquisition and data processing. During the evaluation of the postures and movements at work, we discovered differences in the applicable standards: Decree 542/2007 Coll. (Slovak legislation), STN EN 1005-4+A1, French standards default in the Captiv system. Standards define the thresholds for hazardous postures with significant differences in several evaluated body segments, which also affects the final evaluation of the measurements. Based on the results of our research, we found that respondents were in an acceptable position for approximately 63% of the total duration of the work activity in terms of the Legislative method, 44% with Captiv and 27% with Standards method.

In the European Union, Occupational Safety and Health legislation generally refers to European Regulation (CE) n. 1272/2008 to define and classify carcinogens of concern for occupational risk assessment and exposure assessment. In Europe, the current reference is Directive (UE) 2022/431, regarding carcinogen, mutagen and reprotoxic agents (CMRs) exposure. However, at worldwide level, different classification approaches are used to establish carcinogenicity of substances and it is often difficult to compare the classifications of carcinogenicity (CoCs) proposed by different international bodies. This study aims to investigate a list of carcinogens of concern in occupational settings based on the CLP (Classification Labelling Packaging) CoC, and to create a tool that allows a rapid translation-comparison of some international CoCs with the reference one. CoCs proposed by various sources were consulted and used to apply a translation method, to favor an alignment of different CoCs according to a reference. Results outlined that considering diverse sources, CoCs can result in different classifications of the same chemicals. Overall, this may have implications for the hazard assessment process, which is the base of risk assessment. The proposed tool is expected to help risk assessors in the occupational field when it is needed to have a comparison with different CoC systems.

Flooding during the rainy season poses a significant threat to the city of Hargeisa, impacting the well-being of both its residents and the local ecosystems. This research focuses on urban flood control, with a specific emphasis on finding sustainable solutions for managing large stream in Hargeisa. The study identifies five key dimensions, including infrastructure, transportation, environmental soil, life, and property, as critical factors in addressing the issue. By employing a comparative method and collecting data through closed-ended questions, the research aims to analyze and weigh eleven potential solutions, seeking to identify the most effective approaches. The findings of the study indicate that constructing a dam emerges as a promising and sustainable solution, with a weightage of 70 percent. This highlights the potential of a dam in mitigating the impact of floods in the region. Additionally, considering the government's economic capacity, the implementation of check dams is identified as another viable option, with a weightage of 95 percent for reducing the flood power of the stream. These solutions offer practical and effective measures to address the recurring problem of flooding in Hargeisa. To support future decision-making and planning, the research underscores the need for establishing a comprehensive rainfall data database. This database would store relevant information on rainfall patterns, enabling better understanding and prediction of flood events. The study emphasizes the importance of collaboration between local government authorities, environmental organizations, and stakeholders to develop and implement effective flood control strategies. This research provides a systematic approach that can inform and benefit regional and global researchers, policymakers, and municipal governments in their efforts to address urban flood control challenges, not only in Hargeisa but also in similar contexts worldwide.

The present work fronts the human pose estimation problem, developing a method that enables automated ergonomic risk assessment. A research methodology is developed to calculate joint angles from digital snapshots or videos by using computer vision and machine learning techniques to get a more accurate ergonomic risk assessment. Starting from an ergonomic analysis, the study explores the use of a semi-supervised training method to detect the skeletons of workers. The research methodology developed aims to infer the positions and angles of the joints, to calculate the criticality index based on the RULA scores and fuzzy rules. Then, to prevent work-related musculoskeletal disorders (WMSD), improve production capacity and decrease the ergonomic risk, the system uses joint with a collaborative robot to support the worker in carrying out the most critical operations. The method has been tested on a real industrial case in which manual assembly activities of electrical components are conducted. The approach developed can overcome the limitations of recent developments based on computer vision or wearable measurement, sensors by performing an assessment with an objective and flexible ap-proach to postural analysis development.

(1) Background: Surgical phases form the basic building blocks for surgical skill assessment, feedback and teaching. Phase duration itself and its correlation to clinical parameters has not yet been investigated. Novel commercial platforms provide phase indications but have not been assessed for accuracy yet. (2) Methods: We assess 100 robot-assisted partial nephrectomy videos for phase duration based on previously defined proficiency metrics. We develop an annotation framework and subsequently compare our annotations to an existing commercial solution (Touch Surgery, Medtronic™). We subsequently explore clinical correlations between phase durations and peri-operative parameters. (3) Results: Objective and uniform phase assessment requires precise definitions derived from an iterative revision process. Comparison to a commercial solution shows large differences in definitions across phases. BMI and duration of renal tumor identification correlate positively, as well as tumor complexity and both tumor excision and renorraphy duration. (4) Conclusions: Surgical phase duration can be correlated with certain clinical outcomes. Further research should investigate if retrieved correlations are also clinically meaningful. This requires increasing dataset sizes and facilitation through intelligent computer vision algorithms. Commercial platforms can facilitate this dataset expansion and help unlock the full potential, provided the disclosure of phase annotation details.

When undertaking wind assessment around buildings using large eddy simulation (LES), the implementation of the integral length scale at the inlet for inflow generation is controversial, as real atmospheric length scales require huge computational domains. While length scales significantly influence inflow generation in the domain, their effect on the downstream flow field has not yet, been investigated. In this paper, we validate the effectiveness and accuracy of implementing a reduced turbulence integral length scale for inflow generation in LES results at the rooftop of low-rise buildings and develop a technique to estimate the real local length scales using simulation results. We measure the wind locally and calculate the turbulence length scales from the energy spectrum of the wind data and simulation data. According to these results, there is an excellent agreement between the length scale from simulation and measurement when they are scaled with their corresponding freestream/inlet value. These results indicate that a reduced integral length scale can be safely used for LES to provide a reliable prediction of the energy spectrum as well as the length scales around complex geometries. The simulation results were confidently employed to obtain the best location for a wind turbine installation on low-rise buildings.

Damage assessment is one of the most crucial issues for bridge engineers, especially for existing steel bridges. Among several methodologies, the vibration measurement test is a typical approach in which the natural frequency variation of the structure is monitored to detect the existence of damage. However, locating and quantifying the damage is still a big challenge. In this regard, the artificial intelligence (AI)-based approach seems a potential way to accomplish those obstacles. This study deploys a comprehensive campaign to determine all dynamic parameters of a pre-damage steel truss bridge structure. Based on the results of mode shape, natural frequency, and damping ratio, a finite element model (FEM) is created and keeps updating. The artificial intelligence network's input data will be analyzed and evaluation from damage cases. The trained artificial neural network model will be curated and evaluated to confirm the approach's feasibility. During the actual operational stage of the steel truss bridge, this damage assessment system is showing good performance in terms of monitoring the structural behavior of the bridge under some unexpected accidents.

Strengthening the analysis and risk assessment of the pig epidemic will help to better prevent and mitigate epidemic risks and promote high-quality development of the pig industry. Based on the systematic grasp of the situation of live pig epidemics, a risk assessment index system was constructed, and the spatial and temporal variation characteristics of the risk of pig epidemics in China were explored by the entropy method. In recent years, the overall trend in pig epidemics in time first increased and then decreased, and in space, the trend in the acceleration of the spread across the country continued to weaken. China still faces challenges, such as many types and a wide range of diseases, large total livestock breeding and weak epidemic prevention and control capacity, and a large risk of introduction of foreign animal epidemics. The spatial and temporal variation in the pig epidemic risk was obvious; there was one high-risk area, two higher-risk areas and 10 medium-risk areas in recent years, and the epidemic risk was highest in Beijing, Hainan, Liaoning, Tibet and Zhejiang. However, there were significant differences in the regional distribution of the risk of pig epidemics in different years. To further build a secure “defense system” for the high-quality development of the pig industry, it is recommended to improve the monitoring and early warning system of pig epidemic risk, perfect the pig epidemic prevention and control system, and strengthen the regional collaboration mechanism of epidemic prevention and control.

This paper presents the goals and components of a quantitative energy balance assessment framework to define PEDs flexibly in three important contexts: the context of the district's density and RES potential, the context of a district's location, induced mobility and the context of the dis-trict's future environment and its decarbonized energy demand or supply. It starts by introducing the practical goals of this definition approach: achievable, yet sufficiently ambitious to be inline with Paris 2050 for most urban and rural Austrian district typologies. It goes on to identify the main design parts of the definition: system boundaries, balancing weights and balance targets and argue how they can be linked to the definition goals in detail. In particular we specify three levels of system boundaries and argue their individual necessity: operation, including everyday mobili-ty, including embodied energy and emissions. It argues that all three pillars of PEDs, energy effi-ciency, onsite renewables and energy flexibility can be assessed with the single metric of a prima-ry energy balance when using carefully designed, time-dependent conversion factors. Finally, it is discussed how balance targets can be interpreted as information and requirements from the sur-rounding energy system, which we identify as a "context factor". Three examples of such context factors, each corresponding to the balance target of one of the previously defined system bounda-ries operation, mobility and embodied emissions are presented: Density (as a context of opera-tion), sectoral energy balances and location (as a context for mobility) and an outlook of a person-al emission budgets (as a context for embodied emissions). Finally, the proposed definition framework is applied to seven distinct district typologies in Austria and discussed in terms of its design goals.

Practitioners who assess the risk associated with urban trees often factor in the presence or absence of visual tree defects when determining whether a tree may fail. While these defects are a main fixture in many tree risk assessment systems and best management practices, the research supporting their usefulness in predicting tree failure during storms is limited. When looking at past research involving populations of storm-damaged trees, there are several defects that have never predicted failure (or have been associated with reduced rates of failure). In this study, we took a closer look at four such defects: codominant branches; branch unions with included bark; multiple stems originating from the same point; and overextended branches. After Hurricane Ian, we revisited 1519 risk assessed trees where one of these four defects was identified as the primary condition of concern. Fourteen of these trees experienced branch failure during the storm (which hit the study area as a downgraded tropical storm). Upon closer inspection, none of these failures occurred at the defect of concern. Our findings indicate that none of the defects assessed appeared to increase the likelihood of tree failure in the species tested. Our results are in line with past research on these defects derived from post-storm assessments and analysis.

Photoplethysmography is a widely used technique to noninvasively assess heart rate, blood pressure, and oxygen saturation. This technique has a large potential for further applications, for example in the field of physiological and mental health monitoring. However, advanced applications of photoplethysmography have been hampered by the lack of accurate and reliable methods to analyze the characteristics of the complex nonlinear dynamics of the photoplethysmogram. Methods of nonlinear time series analysis may be used to estimate the dynamical characteristics of the photoplethysmogram but they are highly influenced by the length of the time series, which is often limited in practical photoplethysmography applications. The aim of this study was to evaluate the error in the estimation of the dynamical characteristics of the photoplethysmogram associated to the limited length of the time series. The dynamical properties were evaluated using recurrence quantification analysis, and the estimation error was computed as a function of the length of the time series. Results demonstrated that properties such as de-terminism and entropy can be estimated with an error lower than 1% even for short photople-thysmogram recordings. Additionally, the lower limit for the time series length to estimate the average prediction time was computed.

Tinnitus is an auditory phantom perception in the ears or head in the absence of a corresponding external stimulus. There is currently no effective treatment available that reliably reduces tinnitus. Educative counseling is a treatment approach that aims to educate patients and inform them about possible coping strategies. For this feasability study, we implemented educational material and self-help advice in a smartphone app. Participants used the educational smartphone unsupervised during their daily routine over a period of 4 months. Comparing the tinnitus outcome measures before and after smartphone-guided treatment, we measured changes in the tinnitus-related distress, but not in tinnitus loudness. Improvements on the Tinnitus Severity numeric rating scale reached an effect size of .408, while the improvements on the THI were much smaller with an effect size of .168. Analysis on the user behavior showed that frequent and intensive use of the app is a crucial factor for treatment success: participants that used the app more often and interacted with the app intensively, reported a stronger improvement of the tinnitus. Between study allocation and final assessment, 26 of 52 participants dropped out of the study. Reasons for the dropouts and lessons for future studies are discussed in this paper.

Currently available nationwide prediction models for fine particulate matter (PM_2.5) lack prediction confidence intervals and usually do not describe cross validated model performance at different spatiotemporal resolutions and extents. We used 41 different spatiotemporal predictors, including data on land use, meteorology, aerosol optical density, emissions, wildfires, population, traffic, and spatiotemporal indicators to train a machine learning model to predict daily averages of PM_2.5 concentrations at 0.75 sq km resolution across the contiguous United States from 2000 through 2020. We utilized a generalized random forest model that allowed us to generate asymptotically-valid prediction confidence intervals and took advantage of its usefulness as an ensemble learner to quickly and cheaply characterize leave-one-location-out CV model performance for different temporal resolutions and geographic regions. Using a variable importance metric, we selected 8 predictors that were able to accurately predict daily PM_2.5, with an overall leave-one-location-out cross validated median absolute error of 1.20 ug/m³, an R² of 0.84, and confidence interval coverage fraction of 95%. When considering aggregated temporal windows, the model achieved leave-one-location-out cross validated median absolute errors of 0.99, 0.76, 0.63, and 0.60 ug/m³ for weekly, monthly, annual, and all-time exposure assessments, respectively. We further describe the model’s cross validated performance at different geographic regions in the United States, finding that it performs worse in the Western half of the country where there are less monitors. The code and data used to create this model are publicly available and we have developed software packages to be used for exposure assessment. This accurate exposure assessment model will be useful for epidemiologists seeking to study the health effects of PM across the continental United States, while possibly considering exposure estimation accuracy and uncertainty specific to the the spatiotemporal resolution and extent of their study design and population.

Background and Objectives: Sports medicine, orthopaedic and rehabilitation physicians use gait analysis and goniometry to evaluate and diagnose patients with neuro-musculo-skeletal diseases. Goniometry is a measuring method that shows the joint’s range of motion. Three-dimensional goniometry has been used in order to assess the patients in a kinematic manner, but they are not affordable, so, phone apps come handy to any orthopaedic or rehabilitation physician so we can have a clear image of the progress made by the patient after the rehabilitation program or should something happen and the patient cannot come to the facility, such as the Covid-19 pandemic, when some orthopaedic and most of the rehabilitation facilities have been temporarily closed. Midstance has been chosen as the moment of the gait evaluation in this paper since it has an important role in stability. The objective of this paper is to figure out if the measurements taken during midstance at the knee joint of the subjects can be statistically significant and used during usual examinations. Materials and Methods: Four groups of subjects: patients suffering from hip, knee, hip and knee osteoarthritis and a control group volunteered their participation, being asked to normally walk while their gait was recorded and uploaded into Angles App – a phone based videogoniometer. Results: Patients suffering from hip osteoarthritis have a higher knee angle on the right side than the ones suffering from knee osteoarthritis, hip and knee osteoarthritis and the control group. Female patients suffering from hip osteoarthritis also presented a more flexed knee than the ones suffering from knee osteoarthritis and the ones in the control group, the knee flexion presenting itself as a compensation mechanism. Conclusion: Video goniometry can help us make an orthopaedic, rehabilitation or neurology database for each assessment with constant updates of the evolution of the osteoarthritis patient’s treatment.