Successful work performance is an important part of everyday functioning. Different factors could contribute to efficiency at the workplace. Two studies aim to establish how different forms of knowledge transfer at the workplace are related to self-rated work performance and whether better work performance is related to mindfulness as an aspect of cognitive functioning. The participants were 742 working Bulgarians in Study 1 and 259 workers in Study 2. Ten scales were used in Study 1, measuring different forms of knowledge transfer and self-rated work performance, and two scales were used in Study 2, measuring self-assessed work performance and mindfulness. The results revealed that higher self-assessment of work performance correlated positively but weakly with the sharing of tacit knowledge at the workplace, sharing knowledge with colleagues in dyads, work climate encouraging mastership, sharing knowledge in teams, knowledge transfer by means of cooperation between different generations, institutionalized transfer of knowledge, knowledge receiving, and estimated effectiveness of participation in supervision as a supervisee. Some forms of knowledge transfer (sharing of tacit knowledge and sharing knowledge with colleagues in dyads) seemed more closely related to self-assessed work performance than others. Self-assessment of work performance did not correlate statistically significantly with performance motivational climate at work. The different forms of knowledge transfer correlated with each other. Better work performance is related to better cognitive functioning, as the second study of 259 workers additionally revealed that higher self-assessment of work performance correlated with better self-awareness measured by the Mindful Attention Awareness Scale, i.e., more attention focused on own thoughts, emotions, and needs, i.e., on what is happening right now. Interconnectedness between the different forms of knowledge transfer indicates that stimulating one kind of knowledge transfer could also stimulate many other forms of knowledge transfer, but this may happen only when organizations support a mastery-motivated climate at work. Established connections between the different forms of knowledge transfer and self-rated work performance, as well as between self-assessed work performance and mindfulness, suggest that good cognitive functioning accompanied good functioning, and both may be facilitated by knowledge transfer at the workplace.

The aim of this study was to investigate the knowledge, attitudes, and behaviors of family physicians regarding testicular cancer and testicular self-examination. This study was conducted with 307 physicians, including family physician specialists, family physician residents, contracted family physician specialist assistants (SAHU), and general practitioners, who agreed to participate in the study. All participants were administered a 33-item questionnaire consisting of sociodemographic questions and questions about testicular cancer and testicular self-examination, developed through literature review. Data analysis was performed using SPSS 22.0 software. 307 family physician specialists, family physician residents, SAHU residents and general practitioners participated in the study. 10.4% of the participants were working as family medicine specialists, 67.4% as family physician assistants, 13.7% as SAHU residents and 8.5% as general practitioners. The mean time spent in the profession was found to be 5.93±5.89. 65.8% of the participants thought that they had partially sufficient knowledge about testicular cancers. 57.7% of the participants stated that they did not know how testicular self-examination was performed. 49.7% of male participants stated that they had never done testicular self-exam before. While 95.8% of the participants thought that regular testicular self-examination was beneficial, 71.0% stated that they did not recommend testicular self-examination to their male patients. 53.4% of the participants thought that testicular self-examination was important; It was determined that 79.2% of them thought it was as important as breast self-examination. The rate of stating that all of the risk factors presented for testicular cancer are risks was found to be statistically significantly higher in specialist family physicians than in general practitioners and resident family physicians. The study revealed that family physicians lacked sufficient knowledge about testicular cancer and testicular self-examination, leading them not to recommend self-testicular examination to patients due to inadequate knowledge. In light of these findings, although self-testicular examination may not be recommended as a screening method, increasing awareness and knowledge among both family physicians and the public is crucial.

Background: Low-level physical activity (PA) among Chronic Low Back Pain (cLBP) is associated with various biopsychosocial factors. This research aimed to study the predictors of PA behavior among cLBP patients. Methods: In the present study 300 eligible patients with cLBP who referred to comprehensive health service centers in the Shahid Beheshti University of Medical Sciences (SBUMS) in Tehran, Iran were random selected.To diagnose the predictors of PA behavior, all the Theory of Reasoned Action (TRA) constructs were examined as risk factors to see if they influence on the probability of PA behavior occurrence and were interpreted through odds ratio (OR). SPSS version 19 was used to analyze the data. Results: Totally 280 cLBP patients with mean age of 57.07 ±13.09 years old participated in the study. This study showed that motivation to comply significant predictor the cLBP patients for subjective norm OR (%95CI): 2.095(0.116-2.792), p-value<0.001), intention was significant predictor for perform the PA behavior OR (%95CI): 1.431(0.138-1.538), p-value <0.001), behavior beliefs could predictor for attitude OR (%95CI): 1.276(0.106-1.355), p-value= 0.002). attitude, normative beliefs, subjective norm ,and evaluation outcome behavior could predictors the cLBP patients for intention to perform the PA behavior OR (%95CI): 1.188(0.032-1.312), p-value<0.001)., OR (%95CI): 1.158(0.076-2.208), p-value=0.003) ., OR (%95CI): 1.104(0.076-1.128), p-value<0.001) ., OR (%95CI): 0.814(0.301-1.440), p-value=0.007). Conclusions: This study showed that the cLBP patients who were normative beliefs and evaluation regarding PA behavior could effect on the intention to engage in greater PA than those via other constructs (attitude and subjective norm). This study showed that the cLBP patients who were normative beliefs and evaluation regarding PA behavior could effect on the intention to engage in greater PA than those via other constructs (attitude and subjective norm). This study showed that the cLBP patients who were normative beliefs and evaluation regarding PA behavior could effect on the intention to engage in greater PA than those via other constructs (attitude and subjective norm).

Background: The practice of self-medication is common worldwide and is an important component of medical self-care. However, the practice can be dangerous and is linked to various risks for the patients and the entire community. This study aimed to estimate the prevalence and factors associated with self-medication among Bangladeshi adults. Methods: A cross-sectional survey was conducted between April and June 2021 among Bangladeshi adults (aged &gt;19 years) using convenient sampling. A total of 1320 data were collected through face-to-face interviews using a standardized questionnaire. Multivariable logistic regression analysis was used to identify factors associated with self-medication practice (SMP). Results: Overall, 41% of adults in our survey reported SMP. The most common illnesses that prompted SMP were common cold/flu (66.4%), gastric problems (65%), and headache (64.4%). The most frequent reasons for SMP were to get better services (30.59%), perceive SMP without side effects (23.28%), and save time with effectiveness (14.56%). Potential risk factors included 10 years (AOR = 1.91; 95% CI: 1.04 - 3.50) and &gt;12 years of schooling (AOR = 5.03; 95% CI: 2.27 - 11.15), being a businessman (AOR = 4.64; 95% CI: 1.74 - 12.37), having ≤6 family members (AOR = 2.13; 95% CI: 1.40 - 3.24), being a member of a social group (AOR = 1.53; 95% CI: 1.10 - 2.12), a health status check after every six months (AOR = 1.52; 95% CI: 1.08 - 2.13), and current ill-health (AOR = 1.41; 95% CI: 1.06 - 1.87). Protective factors identified included ≤30 years of age (AOR = 0.40; 95% CI: 0.17 - 0.93), and practice of modern (AOR = 0.39; 95% CI: 0.22- 0.69) and herbal (AOR = 0.45; 95% CI: 0.21- 0.97) healing types. Conclusion: More than one-third of the study participants reported practicing self-medication. Increasing the community’s awareness of the extreme consequences of SMP and not just the average experience might sway individuals away from SMP, and implementing strict jurisdiction could be a way to minimize the SMP.

When examining the crucial role of civic competence in fostering sustainable societies, economies, and ecosystems, its significance for cultivating responsible and engaged citizens in our ever more interconnected global landscape must be recognized. Notably, education influences the development of civic competence throughout the learning experience at all levels of education. This research aims to explore the evolution of students’ self-assessment in terms of civic competence and its three sub-competences. The objective is to comprehend the present status of students’ self-assessments and explore their potential impact on the formation of a sustainable society. Data were collected for this study using an assessment tool elaborated in the ESF project “Development and Implementation of the Education Quality Monitoring System” for students’ generic competences. The tool, presented in a digital form using the QuestionPro platform, measures six generic competences, including civic competence. A total of 1,166 bachelor students and 354 Master’s students participated in the study, representing 22 Latvian higher education institutions. The study’s findings indicate that civic competence in the sample is considerably lower than the other generic competences measured, with a greater dispersion of results. The results also highlight specific areas within universities that require improvement during the learning process to cultivate individuals who are sustainable and socially responsible members of society.

Self-esteem, the evaluation of one's own worth or value, is a critical aspect of psychological well-being and mental health. In this paper, we propose an active inference account of self-esteem, casting it as a sociometer, or an inferential capacity to interpret one's standing within a social group. This approach allows us to explore the interaction between an individual's self-perception and the expectations of their social environment.When there's a mismatch between these perceptions and expectations, the individual needs to adjust their actions or update their self-perception to better align with their current experiences. We also consider this hypothesis in relation to recent research on affective inference, suggesting that self-esteem enables the individual to track and respond to this discrepancy through affective states such as anxiety or positive affect. By acting as an inferential sociometer, self-esteem allows individuals to navigate and adapt to their social environment, ultimately impacting their psychological well-being and mental health.

The purpose of this study is to analyze the self-regulated learning and the ability to write scientific papers of students after learning with the Project-Based Digital Science Module (DSM). This research is a mixed methods by analyzing quantitatively and qualitatively. The research instrument used to obtain data is using a product assessment sheet and a self-regulated learning questionnaire. Data analysis uses N-Gain to determine the increase in self-regulated learning scores and student scientific writing skills scores, and uses linear regression analysis to determine the effect of self-regulated learning on student scientific writing skills. The results obtained showed N-Gain score of learning independent is 0,65 and scientific writing ability is 0,94, then significant’s score from linear regression by using SPSS is 0,22 < 0,05. This result showed an increase in self-regulated learning and the ability to write scientific papers of students on each indicator after learning using the Project-Based Digital Science Module (DSM). In addition, based on the results of data analysis, it can be seen that there is an influence of self-regulated learning on the ability to write scientific papers of students after learning using the Project-Based Digital Science Module.

X-rays production through betatron radiation emission from electron bunches is a valuable resource for several research fields. The EuAPS (EuPRAXIA Advanced Photon Sources) project, within the framework of the EuPRAXIA project, aims to provide 1-10 keV photons (soft X-rays) developing a compact plasma-based system designed to exploit self-injection processes that occur in highly nonlinear laser-plasma interaction (LWFA) to drive electron betatron oscillations. Since the emitted radiation spectrum, intensity, angular divergence, and possible coherence strongly depend on the properties of the self-injected beam, accurate preliminary simulations of the process are necessary to evaluate the optimal diagnostic device specifications. Dedicated tools for these tasks are under development: electron trajectories from particle-in-cell (PIC) simulations are currently undergoing numerical analysis through the calculation of retarded fields and spectra for various plasma and laser parameter combinations. At the same time, an analytical approach is being examined to obtain an expression for the emitted spectrum, assuming linear or quadratic electron energy variation. Code structure and some trajectories analysis results are presented.

Self-selecting the intensity of aerobic training is a perspective that allows practitioners to develop autonomy (choice of pace), improve physical fitness and achieve weight loss. To compare the effect of four aerobic training protocols on cardiometabolic and psycho-affective responses in physically inactive adult men and women. The sample consisted of 11 individuals aged 56 ± 10 years and BMI 29.2 ± 2.4 kg/m2 performed four different treadmill aerobic training protocols, including: 1-individual with self-selected intensity (ISS), 2-individual with prescribed intensity (IPI) (64-76% of HR max), 3-small group with self-select. selected intensity (SGS) and 4-small group prescribed intensity (SGP) (64-76% of HR max). Heart rate (HR), lactate (LACT), perceived exertion (RPE), affective response (FS), activation scale (FAS), enjoyment (PACES) and intention to repeat the session (INT) were analyzed. Statistical analysis used ANOVA with Tukey's post hoc test (p&lt;0.05). HR, LACT and RPE analyzes did not show significant differences between protocols. The FS showed a smaller decline in the SI protocol (p&lt;0.05), and the intention to repeat the training session was greater in the SI protocol (p&lt;0.05). Conclusion: The data allow us to conclude that the SI training protocol produced superior results in affective response, pleasure and intention to repeat the session.

Background Coronavirus disease 2019 (COVID-19) almost ceased to spread across the globe, but post Covid psychological experiences are rarely documented. It is essential to understand the individual psychological needs and challenges regarding working during the covid-19 pandemic and resilience and psychological health to continuing work in the aftermath of this crisis. Objective To explore the psychological transformation of staff nurses after COVID-19 Methods A phenomenological and purposive sampling approach was employed. Registered nurses working at the largest health organization in Qatar includes 14 health facilities were invited to participate in this study. 17 nurses who were working in the facilities and were deployed during the first, second and third wave of Covid 19 participated in the interview. Data were collected through semi-structured face-to-face interviews using quarantine measures. The interview data were analyzed using inductive thematic analysis. Results The psychological transformation of participants was summarized into three themes fear zone, Learning zone and growth zone. These themes were classified into 10 sub-themes Fear and anxiety, Influence of media and news, Frequent change in policies and guidelines were the fear zone factors .Secondly Coping mechanism, teamwork, establishing compassionate care, social acceptance, personal and professional benefits helps them learn psychologically. Thirdly growth factors such as confident & resilient, Sense of purpose and Change life perception and meaning Conclusion Working during COVID-19 imposed many challenges on nurses such as workload and stress. However, the different waves of the pandemic may increase the resilience, confidence and life meaning in nurses. Their previous experiences in handling difficult situations during the pandemic may make the nurses become more confident in dealing with stressful situations and working under pressure.

The production associated with geopolymers is more environmentally friendly because it does not emit as much carbon dioxide as when OPCs are used. In addition, research has been initiated to produce a geopolymer with very good mechanical properties without the need to cure it at high temperatures. Bio-additives such as honey, cotton or molasses were found to have a good effect on the properties of the geopolymer. The purpose of this study was to develop a composition of geopolymer modified with bioaddi-tives (introduction of plant-derived materials containing sugars) in order to improve the strength para-meters of geopolymers cured at ambient temperature or to accelerate their setting process, and to identify whether it is possible to produce geopolymers with good strength parameters without the need for annealing. In this study, fly ash (FA)-based materials were made and addi-tionally modified with cane molasses and beet molasses in varying amounts. The made samples were subjected to surface morphology analysis (SEM), mechanical properties analysis - compres-sive and flexural strengths, phase composition analysis (XRD) and absorption analysis.

In response to escalating environmental concerns and the surge in eco-friendly sports activities, this study investigates the determinants of sustained intention to participate in plogging, a prac-tice that combines jogging and litter collection. The study seeks to discern the effects of autonomy, competence, and relatedness experiences, as suggested by Self-Determination Theory, on the intent to persist in plogging. Additionally, the study probes the moderating role of eco-friendly attitudes, thereby propelling the confluence of sports and environmental research. The research methodology encompassed surveying plogging participants and analyzing their responses. The validation of these relationships was executed using multi-group structural equation modeling. The results revealed that autonomy and competence did not significantly sway extrinsic motivation, but relatedness surfaced as the most influential factor. This suggests that plogging, primarily viewed as a volunteering activity, serves more as a prosocial behavior that bolsters relationships rather than a means to enhance physical competence. The study also found that the value participants derived from plogging and their intention to continue varied based on their eco-friendly attitudes. The study concludes that voluntary participation and socializing are the core values of plogging, and understanding these values can foster healthier and more sustainable behaviors. The findings offer valuable insights for academic, practical, and policy perspectives in promoting eco-friendly sports activities.

In the study, it was aimed to develop a valid and reliable scale in order to determine the self-efficacy perceptions of classroom teachers in the field of mathematics learning difficulties. In the development process of the scale, the basic resources and the scale development studies in the literature were examined. First, a pool of substances was created. Content validity was ensured by taking the opinions of 21 expert participants in the 24 question areas determined in the item pool. Content validity index was used in content validity. In this analysis, two questions were removed from the scale. Preliminary application was made with 44 participating teachers who are experts in their fields and exploratory factor analysis was started. For exploratory factor analysis, 359 people consisting of classroom teachers in Sakarya province were studied. In the explanatory factor analysis, 5 items were removed from the scale by looking at the factor load. The factor loadings for the 17 items in the scale vary between 0.508 and 0.976. Among the comparative fit indices obtained as a result of confirmatory factor analysis, RMSEA=0.067 and Cmin/DF=1.568 were calculated. The Cronbach alpha reliability coefficient of the measurements is 0.970. The data obtained were analyzed with statistical methods using SPSS 25, AMOS 24 and Microsoft Excel programs. The validity and reliability criteria of the scale developed within the scope of the study were met.

Research for novel vaccine adjuvants remains a critical need to improve the immune responses to a recombinant vaccine antigen. Emulsion adjuvants such as AS03 and MF59, particularly in the area of Influenza vaccines, have shown antigen dose sparing and allowed reduced immunizations. It was previously demonstrated that these emulsion adjuvants can be formulated using a simpler, low shear process of self-emulsification. The role of alpha tocopherol as an immunomodulator in emulsion adjuvants is evident from the success of AS03 in the on-going covid-19 pandemic. Although, it was a challenge to formulate alpha tocopherol with a low shear process to get closer to the AS03 composition, the self-emulsified version referred as self-emulsifying adjuvant systems (SE-AS) showed comparable immune responses to AS03 when co-administered with a Quadrivalent influenza virus (QIV) vaccine. In this paper, we first optimized the SE-AS with alpha tocopherol referred to as SE-AS44 to allow sterile filtration. We compared the in vitro cytokine profile with self-emulsifying adjuvant 160 (SEA160), a squalene-only self-emulsified adjuvant with composition similar to MF59. We compared SE-AS44 and SEA160 co-administered with a recombinant cytomegalovirus (CMV) pentamer antigen, which is a less immunogenic antigen, in vivo to compare the antibody and T-cell responses, in different adjuvanted groups, in C57BL/6 mice.

Self-healing is the capability of materials to repair themselves after damage has occurred, usually by interaction between molecules or chains. Physical and chemical processes are applied for the preparation of self-healing systems. There are different approaches for these systems such as heterogeneous systems, shape memory effects, hydrogen bonding or covalent-bond interaction, diffusion and flow dynamics. Self-healing mechanisms can occur in particular by heat and light exposure or by reconnection without direct effect. The applications of these systems display an increasing trend in both R&D and industry sectors. Moreover, self-healing systems and their energy storage applications are currently getting great importance. This review aims to provide general information on recent developments in self-healing materials and their energy applications in view of the critical importance of self-healing systems for lithium-ion batteries (LIBs). In the first part of the review, an introduction about self-healing mechanisms and design strategies of self-healing materials is given. Then, selected important healing materials in the literature for the anodes of LIBs are mentioned in the second part. The results and future perspectives are stated in the conclusion section.

Background: HIV self-testing (HIVST) is one of the recommended approaches for HIV testing services, particularly for helping reach populations who would not normally access facility-based HIV testing. HIVST must be tailored to different populations to ensure uptake. Objective: The main objective of this study was to develop an acceptable HIVST delivery strategy to help improve urban men’s engagement with HIV services. Methods: We invited key stakeholders for urban men’s HIV services to participate in a co-creation workshop aimed at developing HIVST delivery approaches for urban men, using eThekwini municipality as a study setting. We conducted purposive sampling to include health care users and health care providers, representing a range of views across the public sector and voluntary sector. We employed the Nominal Group Technique (NGT) method for data collection. The NGT workshop was conducted in two consecutive phases: phase one was focused on determining barriers for men’s engagement with the current/facility-based HIV testing services; phase two was aimed at determining HIVST delivery strategies. We used the results of the NGT to design a tailored HIVST strategy for urban men in eThekwini District. Results: Participants identified the following psychological factors as the most important barriers to uptake of HIV testing services by urban men: stigma, ignorance about the importance of testing and testing process as well as fear of positive test results. Key stakeholders suggested internal motivation strategies as a potentially effective approach to support HIVST delivery strategy. Guided by the NGT results, we designed a HIVST delivery strategy that is supported by a risk communication approach Conclusion: We designed an evidence-based risk communication mobile health (mHealth) strategy coupled with SARS COV-2 self-testing tailored to improve men’s uptake of HIVST. A follow-up study to evaluate the feasibility of implementing these approaches is recommended.

Our brains process information using a layered hierarchical network architecture, with abundant connections within each layer and sparse long-range connections between layers. As these long-range connections are mostly unchanged after development, each layer has to locally self-organize in response to new inputs to enable information routing between the sparse in- and output connections. Here we demonstrate that this can be achieved by a well-established model of cortical self-organization based on a well-orchestrated interplay between several plasticity processes. After this self-organization, stimuli conveyed by sparse inputs can be rapidly read out from a layer using only very few long-range connections. To achieve this information routing, the neurons that are stimulated form feed-forward projections into the unstimulated parts of the same layer and get more neurons to represent the stimulus. Hereby, the plasticity processes ensure that each neuron only receives projections from and responds to only one stimulus such that the network is partitioned into parts with different preferred stimuli. Along this line, we show that the relation between the network activity and connectivity self-organizes to a biologically plausible regime. Finally, we argue how the emerging connectivity may minimize the metabolic cost for maintaining a network structure under the above described constraints.

This proposal describes the design and development of an interoperable application that supports green open access with long-term sustainability and improved user experience of article deposit. Introduction: The lack of library resources and unfriendly repository user interface are two significant barriers that hinder green open access. Tasked to implement the open access mandate, librarians at an American research university developed a comprehensive system called Easy Deposit 2 to automate the support workflow of green open access. Implementation: Easy Deposit 2 is a web application that is able to harvest newly publications, outreach for manuscript on behalf of the library, and facilitate self-archiving to IR. It is developed and maintained by the library and integrated with the IR. Results and Discussion: The article deposit rate is about 25% with Easy Deposit 2, which increases significantly comparing to the previous period. It also serves as a local database for faculty publications with open access status. The lesson learned is that library cannot rely on a single commercial provider for publication data due to mismatched priorities. Conclusion: Recent IT developments provides new opportunities of innovation like Easy Deposit 2 in supporting open access. Academic librarians are vital in promoting "openness" in scholarly communication such as transparency and diversity in the sharing of publication data.

The study aimed to understand the experiences of adolescent smokers who participated in a smoking cessation program based on self-reflection, and to develop the theoretical basis for constructing similar programs. The participants, ten students from middle and high schools located in cities G and S, were interviewed after the program ended. Data were collected from August to November 2019 and analyzed using a phenomenological approach to understand participant experiences in depth. The analysis revealed five major themes: ‘Uniqueness of the Program,’ ‘Perception of Smoking Cessation,’ ‘Positive Reflection on Life,’ ‘Understanding Others,’ and ‘A Search for Hope and Vision in Life.’ The findings revealed that the smoking cessation program facilitated the development of self-identity and vision, which may indirectly strengthen the motivation for adolescent smokers to quit smoking. These findings suggest the need for a life-changing smoking cessation program that enhances self-concept and self-esteem. Moreover, it highlights the importance of follow-up research to ensure effectiveness, and the need to develop programs with creative content.

While some researchers have suggested that the self-employment (SE) sector is a haven during a financial Crisis, others believe that SE is not necessarily the desired outcome, but an indicator that the labor market is tightening for some groups. Few researchers have compared the SE sector before and after the occurrence of a significant financial Crisis, especially in developed countries. This paper analyzes the determinants of entry into self-employment during the 2008 Spanish Crisis. Using data from the Encuesta de Presupuesto Familiar (EPF), results show that although the rate of SE did not experience a significant change during this time the Crisis affected people differently based on gender, with being females more affected than males. Results also suggest differences between Comunidades Autonomas in how the self-employment sector behaved during the Crisis.

Due to limitation of the binding energy of a self-gravitating matter, the radius of a body is at least twice larger than the Schwarzschild radius. The total energy is adsorbed at the body surface, giving rise of a size-dependent surface tension. Since the Hawking temperature appears to be the critical one, the black holes possess zero surface tension. Microscopic neutrino stars are also introduced.

This study aimed to know the conditioning factors of the transition process to the self-care of women diagnosed with HIV/AIDS. This qualitative study was carried out from June to September 2015 with seven seropositive women, users of a specialized service in sexually transmitted diseases in the municipality of Imperatriz, Maranhão State, Brazil. For the data collection, an individual interview was used, and data analysis was performed by content analysis delineated by Hsieh and Shannon (2005). The resources that influence the self-care in the transition process of women with HIV/AIDS are represented by personal conditioning factors, such as the meaning they attribute to the living with the disease, personal attitudes and cultural beliefs, socioeconomic status, preparation and knowledge about the disease, and by conditioning factors found in the community and society. The transition theory can provide important insights about the resources present in the adaptation process of women diagnosed with HIV so that they can perform their self-care satisfactorily.

To better understand the shape memory materials and self-healing materials, a new series of liquid-crystalline shape memory polyurethane (LC-SMPU) composites, named SMPU-OOBAm, were successfully prepared by incorporating 4-octyldecyloxybenzoic acid (OOBA) into the PEG-based SMPU. The effect of OOBA on the structure, morphology and properties has been carefully investigated. The results demonstrate that SMPU-OOBAm have liquid crystalline properties, triple-shape memory properties and self-healing properties. The incorporated OOBA promotes the crystallizability of both soft and hard segments of SMPU, and the crystallization rate of the hard segment of SMPU decreases when the OOBA-content increases. Additionally, the SMPU-OOBAm forms a two-phase separated structure (SMPU phase and OOBA phase), and it shows two-step modulus changes upon heating. Therefore, the SMPU-OOBAm shows triple-shape memory behavior, and the shape recovery ratio decreases with an increase in the OOBA content. Finally, SMPU-OOBAm shows self-healing properties. The new mechanism can be ascribed to the heating-induced “bleeding” of OOBA in the liquid crystalline state and the subsequent re-crystallization upon cooling. This successful combination of liquid crystalline properties, triple-shape memory properties and self-healing properties make the SMPU-OOBAm composites with many promise applications in smart optical devices, smart electronic devices and smart sensors.

Two polyurethanes (PUs) were similarly synthesized by reacting a cycloaliphatic isocyanate with 1,4 butanediol and two polyols of different nature (polyester, polycarbonate diol) with molecular weights of 1000 Da. The PU made with polycarbonate diol polyol (YCD) was the only showing intrinsic self-healing at 20 °C. For assessing the mechanism of intrinsic self-healing of YCD, a structural characterization by molecular weights determination, infrared and X-ray photoelectronic spectroscopies, differential scanning calorimetry, X-ray diffraction, thermal gravimetric analysis and dynamic mechanical thermal analysis was carried out. It was concluded that the self-healing at 20 °C of YCD was due to non-covalent dynamic exchange interactions among the carbonate groups of the soft segments. Therefore, the chemical nature of the polyol played a key role in developing PUs with intrinsic self-healing at 20 °C.

This work is the first part of a series of papers on a comprehensive analysis of the processes of prebiotic self-organization and protophotosynthesis on the surface of semiconductor minerals and in systems of natural dispersed semiconductors. Comprehensive analysis within the framework of the "semiconductor world" concept allows integrating a variety of models on a single physical basis - from ZnS world and FeS world (based on inorganic semiconductors) to the PAH world and aromatic world (including organic semiconductors). Thus, we do not put forward a new alternative hypothesis of chemical evolution - a new "chemical world", but only integrate the evolutionary and geochemical criteria of different "chemical worlds" into a single "physical world", which gives one the opportunity to reconstruct and predict the directions of chemical evolution according to the uniform principles of physical chemistry. In the first part of this series we consider photoinduced self-organization and "photo-controlled" evolution of the early protobiological systems performing solar energy conversion on the surface of dispersed semiconductor minerals capable of (photo)catalyzing and photosensitizing prebiological processes. The latter include a transition from the elementary cycles of photocatalytic reactions on the surface of semiconductors to protophotometabolic cycles and protophotosynthesis, from photophysical processes on the surface of mineral semiconductors to photoinduced membrane potentials, from photocontrolled sorption on the surface of such minerals to the formation of photosensitive protomembranes and selection of photosynthetic structures. The evolutionary approach to the analysis of protobiological mechanisms and protobioenergetics within the framework of the "semiconductor world" concept provides a new approach to the study of the last common point of divergence of protobiological systems, where the emergence principles of different energy supply schemes (like the energy source-specific photoautotrophy and substrate-specific chemoautotrophy) merge at the physicochemical level. The proposed integrating scheme is consistent with most biological, geological, and physicochemical concepts, which ensures its complete cross-checking and internal consistency.

In 2015, the Self-Action Leadership Theory—a qualitative, nomological expansion of self-leadership theory rooted in atmospheric and astronomical metaphor aimed at expanding the personal freedom of individuals, organizations, and nations by bolstering the existential growth of individuals through a series of Maslow-esque stages of holistic, personal development. This article introduces an accompanying, practitioner-based Model of Self-Action Leadership (SAL) aimed at the implicit enhancement of a holistic range of administrative processes through explicit training, mentoring, and coaching in the model’s general and universally-applicable principles and practices. The SAL model produces an original construct of personal leadership practice that builds upon the extant self-leadership academic canon, which dates back to 1983 (Manz, 1983). It also provides an analogue to four of the five core processes of Project Management by positioning a self-action leader (an individual) as the ongoing “project” at hand. The SAL Model is rooted in action research and was developed through a variety of self-oriented, action research projects in conjunction with a comprehensive, qualitative, analytical autoethnographic study of a scholar’s life experiences.

Globally, the fuel demand is increasing rapidly and the conventional method to produce fuel is toxic which causes environmental degradation and climate crisis. Therefore, biodiesel emerges as the substitute to overcome the conventional fuel problems because biodiesel is renewable and non-toxic. Biodiesel synthesis is the process of using fats and oils to produce biodiesel ester and glycerol. Biodiesel can be produced using edible and non-edible feedstock but using the edible feedstocks problems like fuel vs food, nutritional value and economic considerations were raised. Therefore, non-edible feedstocks are being used to overcome problems arising from edible feedstock. As non-edible feedstocks can easily be grown anywhere on land, doesn’t cause imbalance to food economy and has low cost. Many non-consumable seeds like Mahua, Jatropha, Castor, Neem etc. are used to produce biodiesel. Now a days, researchers are using nanoparticles to enhance the stability, quality, and properties of biodiesel. In future, researchers can use algae and microbial oils for production of biodiesel. Research can also use biojet fuel in such a way that it reduces the carbon emission. In future, production of biodiesel can be integrated into circular economy models to reduce environmental waste and impact. In this review we will discuss the production methods for biodiesel, catalysts for biodiesel production, and non-edible feedstock properties of biodiesel.

Foods that are fermented have a crucial role in global diets, these foods benefit from the process of fermentation, which enhances nutrition, flavor, and safety through the use of probiotics, anti-aging compounds, and antibiotics. Traditional fermentation is based on the spontaneous activity of microorganisms, while modern methods utilize defined cultures for consistency. The microorganisms in cheese are important for the flavor and texture of the product. These microorganisms are either non-starter or starter bacteria, yeast, and mold. The advances in sequencing technology have facilitated an increase in our understanding of these communities and their contribution to the quality and safety of cheese. Despite the health benefits of fermented dairy products, such as yogurt, they can pose a risk of contamination with pathogens. New methods of management and sequencing are crucial to ensuring the safety and quality of fermented foods, combining traditional methods with modern advances.

This article examines the sustainability of beer production through a review of the available scientific literature. Beer production, a beverage of both cultural and industrial importance at a global level, significantly impacts the environment due to the use of natural resources and emissions generated during the various stages of the production process. This study adopts the Life Cycle Analysis (LCA) approach to assess the environmental impact of beer production, from the extraction of raw materials to the disposal of the finished product. Only peer-reviewed studies published between 2001 and July 2024 that address at least one stage of the beer production process were included in the review. The results highlight the critical points of the production cycle and suggest sustainable practices to reduce the environmental impact. This study provides a detailed overview of LCA methods applied to beer production, including defining objectives and scope, life cycle inventory, impact assessment and interpretation of results, and providing recommendations to improve sustainability in the brewing sector. The objectives of this study were to identify the critical point within the beer production cycle that significantly contributes to environmental impacts and to suggest sustainable practices and strategies that can be adopted to reduce the environmental footprint of beer production.

Within the European Union (EU), new plant varieties, to be included at the Common catalog of a member state, has to be registered at the national list, after plant variety testing processes to establish whether the candidate variety is distinguishable, uniform and stable (DUS) and meets the requirement of the cultivation or use value requirement (VCU). Technical development, climate change and changing consumer needs, including the detection of GMOs, necessitate the innovation of plant variety testing methods. Within the EU-funded "InnoVar" project, it has been sent out questionnaires to several countries, which were aimed at analyzing strengths, weaknesses, opportunities and threats (SWOT) of the current methods and with their help it is possible to have look for a new direction, opportunity and strategy, which can incorporate together with the innovation results into the development of the new methods. Our study confirmed that the SWOT analysis could be used to achieve the set goals; according to the answers to the questionnaires, it became necessary to introduce new characters (e.g. cold tolerance) and new test methods (molecular markers, precision techniques, organic farming) into the variety testing procedures. The development of high-yielding, disease and/or pest-resistant plant varieties with good adaptability and the accurate evaluation of genotypes play a crucial role in ensuring that farmers can access high-performing plant varieties and contribute to sustainable food production.

Greenhouse gas (GHG) emission-induced climate change, particularly occurring since the mid-20th century has been considerably affecting short-term weather conditions, such as increasing weather variability, and incidence of extreme weather-related events. Milk production is sensitive to such changes. In this study, we use spatial panel econometric models, Spatial Error Model (SEM) and Spatial Durbin Model (SDM), with a panel dataset at the state-level varying over seasons, to estimate the relationship between weather indicators and milk productivity, in an effort to reduce the bias of omitted climatic variables that can be time-varying and spatially correlated and cannot be directly captured by conventional panel data models. We find an inverse U-shaped effect of summer heat stress on milk production per cow (MPC), indicating that milk production reacts positively to a low-level increase in summer heat stress, and then MPC declines as heat stress continues increasing beyond a threshold value of 72. Additionally, fall precipitation exhibits an inverse U-shaped effect on MPC, showing that milk yield increases at a decreasing rate until fall precipitation rises to 14 inches and then over that threshold milk yield declines at an increasing rate. We also find that, relative to conventional panel data models, spatial panel econometric models could improve prediction performance by leading to smaller in-sample and out-sample root mean squared errors. Our study contributes to the literature by exploring the feasibility of promising spatial panel models and resulting in estimating weather influences on milk productivity with high model predicting performance.

Many farms are replacing the lighting with light emitting diode (LED) bulbs because of the technological modernization. We aimed to investigate the effects of incandescent light (IL) and LED lighting on Cobb500 broiler chickens for six weeks. Production parameters (body weight, feed consumption, feed conversion ratio), calculated slaughter values (yield%, relative breast%, thigh%) and breast meat quality parameters (pH at 45 min and 24 h postmortem, color, drip loss, kitchen equipment losses, shear force, meat composition) were recorded. Non-stop recordings were used to analyze the behavior of the birds in several periods of the rearing. LED group was significantly better in body weigh parameter between week 1-5 and feed conversion ratio between week 2-3. The most significant difference in behavior was observed in the middle of the rearing period. The chickens in the LED group spent more eating time, drinking time, interacting, and resting less. There was no difference in the meat quality parameters, only shear force was significantly lower in the LED group (1781.95±0.33 g/s vs. 2098.82±0.42 g/s). Based on our results, LED lighting can bring positive changes in animal production efficiency, behavior, and important characteristics for meat consumers.

This study explores how young people’s mental health was affected by the COVID-19 pandemic using artwork and semi-structured interviews. This is important to understand so that policy and practice professionals can support those affected, prepare, and respond to future crises, and support young people who are isolated and restricted in other contexts. Co-designed participatory art workshops and interviews were conducted with 16–18-year-olds (N = 21) from the London-based Longitudinal cohort Study of Cognition, Adolescents and Mobile Phones (SCAMP). Artworks and interview transcripts were qualitatively co-analysed with young people. From interviews, six themes were identified: adaptation, restriction, change, challenges, overcoming adversity, and lockdown life. From artwork, four themes were identified; trapped, negative mental wellbeing, positive emotions, and technology. Everyday factors such as home environment, relationships, hobbies, habits, and education or work were key determinants of how challenged and restricted participants felt, and their capacity to overcome this. This implies that young people’s mental health services should collaborate with other sectors to address wider life determinants in a holistic way, and that clearer guidance and support in these areas could mitigate the negative mental health impacts of major environmental changes on young people.

The described data set contains features from the machine control of a five-axis milling machine. The features were recorded during thirteen series productions. Each series production includes a changeover process in which the machine was set up for the production of a different product. In addition to the timestamps and the twenty recorded features derived from Numerical Control (NC) control variables, the data set also contains labels for the different production phases. For this purpose, up to 23 phases were assigned, which are based on a generalized milling process. The data set consists of thirteen .csv files, each representing a series production. The data set was recorded in a production company in the contract manufacturing sector for components with real series orders in ongoing industrial production.

The study focused on the technical and scale efficiency of smallholder pineapple farmers in the Central Region of Ghana. The input-oriented Data Envelopment Analysis (DEA) was used to estimate technical, pure and scale efficiencies of the smallholder pineapple farmers, of which a random sampling procedure was used to select 320 respondents. The study revealed that the farmers were technically inefficient with mean technical efficiency under Constant Returns to Scale (CRS), pure efficiency under Variable Returns to Scale (VRS) and the Scale Efficiency levels of 0.505, 0.641 and 0.772, respectively, due to farmers’ inability to exploit fully the available technology while experiencing evident post-harvest losses resulting from low adoption of post-harvest technologies. Such findings are meaningful and could help the farming communities and relevant policymakers to understand the issues in farming production and hence undertake necessary actions to potentially improve farmers’ technical and scale efficiencies in the study area.

Chemical process control relies on a tightly controlled, narrow range of margins for critical variables, ensuring process stability and safeguarding equipment from potential accidents. The availability of historical process data is limited to a specific setpoint of operation. This challenge raises issues for process monitoring in predicting and adjusting to deviations outside of the range of operational parameters. Therefore, this paper proposes simulation-assisted deep transfer learning for predicting and optimizing the final purity and production capacity of the glycerin purification process. The proposed network is trained by the simulation domain to generate a base feature extractor, which is then fine-tuned using few-shot learning techniques on the target learner to extend the working domain of the model beyond the historical practice. The result shows that the proposed model improved prediction performance by 99% in predicting water content and 79.72% in glycerin prediction over the conventional deep learning model. Additionally, the implementation of the proposed model identified the production and product quality improvement for enhancing the glycerin purification process.

Various environmental, food security and population health problems seem to be related to intensive agriculture production worldwide. This type of food production system impacted the loss of biodiversity and natural habitats; high usage rates of agrochemicals and natural resources had affected soil composition, human health, and nutritional plant quality in rural areas. Intercropping agroecological systems that respect agrobiodiversity could significantly benefit ecosystems, human health, and food security by modifying the nutritional profile and the content of some health-promoting bioactive compounds of the species cultivated in this system. Research on intercropping strategies focuses on the benefits they can offer to ecosystems and less on nutrient plant composition, leaving information scattered when this theme should be more studied due to the critical impact it could provide for human nutrition. Therefore, this review aims to collect viable details on the investigation status of nutrients and bioactive compounds profile in intercropping systems by verifying different regions of the world with unique mixed crops using plant species, along with the criteria for combining them, as well as the nutrients and bioactive compounds analyzed to show what intercropping systems can contribute to food availability and quality.

One of the main constraints of agriculture in sub-Saharan Africa is the steady decline in the level of soil fertility resulting in a continuous decline in crop yields. This study assessed the impact of grass mulch on: the productivity, the income, the soil carbon, and the phytodiversity within three pineapple-based systems of the ecovillage of Donomade in Togo. They are: a model farm with mulch, adopters’ farms, and non-adopters. Production-related data (e.g., number of plants, the number of productive individuals, the mass of products harvested) was obtained by a sampling an area of 100 m². These measurements were coupled with a semi-structured individual’s interviews of producers on the history of the plots and production costs in order to assess their profitability. The fruit production was three times higher within the adopters’ plots (21240 ± 11890 kg/ha) than the non-adopters (7840 ± 7890 kg/ha) and the two thirds of the model farm (33838 ± 9460 kg/ha). Consequently, the net income was 8 to 11 times higher than the conventional pineapple cropping system. According to the cropping systems, the total soil carbon was higher within mulching plots including the model farm and the adopters’ plots and lower within the non-adopters’ plots.

Influenced by historical background, regional economic development, and the frequent occurrence of armed conflict, the human–earth relationship in the Central and Southern Peninsula, which is located in a "fragmented zone", is characteristic of the region. The Indochina Peninsula has now become an area of interest for the study of spatial changes in production–living–ecological spaces (PLES). Taking the Indochina Peninsula as the study area, this paper explores the evolution of the spatio-temporal patterns of PLES and its driving mechanism in the Central and Southern Peninsula, from 2010 to 2020, based on the grid scale. Methods such as the land-use transition matrix, land-use dynamics index, and Geographically and Temporally Weighted Regression (GTWR) were used in our model. Our results show that, from 2010 to 2020, ecological space dominated the PLES pattern on the Indochina Peninsula but its area gradually decreased, accompanied by a sharp increase in the areas of productive and living spaces. The area of PLES interconversion on the Indochina Peninsula in 2010–2020 was 212818.70 km2, and it is characterized by the conversion of ecological space into productive space, as well as the interconversion of woodland ecological and grassland ecological spaces. In addition, the intertransfer of production and ecological spaces was distributed in a network-like manner throughout the Indochina Peninsula, while the transfer of living space was distributed in a point-like manner. The migration path of the center of gravity of PLES on the In-dochina Peninsula demonstrates a significant directional difference. The PLES’s pattern evolution was affected by the degree of multiple factors, with a significant spatial and temporal heterogeneity. The positive and negative feedback effects of the factors were distributed in different areas and in different transfer directions.

A new study for CH4 reforming to hydrogen and hydrogen storage was performed using magnesium-based alloy. MgH2-12Ni (with the composition of 88 wt% MgH2 + 12 wt% Ni) was prepared in a planetary ball mill by milling in hydrogen atmosphere (reaction-involved milling). X-ray diffraction (XRD) analyses were performed for the samples after reaction-involved milling and after reactions with CH4. The variation of adsorbed or desorbed gas with time was measured by a Sieverts’ type high-pressure apparatus at 773 K. The microstructures of the powders were observed using scanning transmission microscope (STEM) with energy-dispersive X-ray spectroscopy (EDS). The synthesized samples were also characterized using Fourier Transform Infrared (FT-IR) spectroscopy. XRD pattern of MgH2-12Ni after reaction with CH4 of 12 bar at 773 K and decomposition under 1.0 bar at 773 K exhibited phases of MgH2 and Mg2NiH4. This shows that reforming of CH4 was occurred, hydrogen produced after reforming of CH4 was then adsorbed on the particles, and hydrides were formed during cooling to room temperature. Ni and Mg2Ni formed during heating up to 773 K are believed to have brought about catalytic effects for reforming CH4. MgH2-12Ni adsorbed 0.8 wt% reformed CH4 within 1 min in a reaction with CH4 of 12 bar at 773 K and then desorbed 0.8 wt% reformed CH4 (hydrogen-containing mixture) within 1 min under 1 bar at 773 K. Attenuated total reflectance FT-IR spectroscopy (ATR-FTIR) spectra of MgH2-12Ni after reactions under 12 bar CH4 at 723 K and 773 K showed peaks of C-H bending, C=C stretching, O-H stretching, O-H bending, and C-O stretching.

Corn is the main agricultural product and has been produced in Kazakhstan as important nutrition in human and animal food. The research results shown in the article, the fact of increasing the sustainability of corn production is formulated, methodological approaches to assessing the level of sustainability are developed, and criteria are defined for the main indicators of sustainability and efficiency of corn production. The world's corn production was 1,223 million tons in the 2021/22 season. Kazakhstan's corn production average was 1,1 million tons and the production area are 206,870 in the 2021/22 season. The yield per hectare was 5,985 kg in the 2021/22 season. Corn consumption was 1170.5 million tons and exported was 180.1 m.tons of corn in the 2021/22 season in Kazakhstan. The purpose of this study is a determination of sustainable developments of corn consumption and production in Kazakhstan and worldwide between the 2011/12 and 2021/22 seasons. Statistical data have been obtained from the International Grain Council, FAOSTAT, USDA, PhD diploma thesis of the article's author, Bureau of National Statistics. Data obtained have been shown in the tables issued by the use of percentage and index calculations. The study analyzed a major factor affecting supply and demand, sustainable development of corn production and market prices.

Outbreaks of Anticarsia gemmatalis (Hübner, 1818) (Lepidoptera: Erebidae), a major pest of soybean, can be controlled below economic thresholds with methods that do not involve the application of synthetic insecticides. Formulations based on natural isolates of the Anticarsia gemmatalis multiple nucleopolyhedrovirus (AgMNPV) (Baculoviridae: Alphabaculovirus), played a significant role in integrated pest management programs in the early 2000s, but a new generation of chemical insecticides and transgenic soybean, have displaced AgMNPV-based products over the past decade. However, the marked genotypic variability present among and within alphabaculovirus isolates suggests that highly insecticidal genotypic variants can be isolated and used to reduce virus production costs or overcome isolate-dependent host resistance. This study aimed to select novel variants of AgMNPV with suitable insecticidal traits that could comple-ment the existing AgMNPV active ingredients. Three distinct AgMNPV isolates were compared by restriction endonuclease profile and in terms of their occlusion body (OB) pathogenicity. One isolate was selected (AgABB51) from which eighteen genotypic variants were plaque purified and characterized in terms of their insecticidal properties. The five most pathogenic variants varied in OB pathogenicity although none of them was faster-killing or had higher OB production characteristics than the wild-type isolate. We conclude that the AgABB51 wild-type isolates ap-pear to be genotypically structured for fast speed-of-kill and high OB production, both of which would favor transmission. Interactions among the component variants are likely to influence this insecticidal phenotype.

In large industrial plants, the trend is to move the position of the human to the area of service and diagnostics, in medium and smaller plants the trend is different and is mainly directed to the sphere of close cooperation between the human and the robotic system. This paper deals with the implementation of human-cooperating robots in manufacturing processes. The analytical part of the paper deals with theoretical knowledge, taking into account the latest trends in the subject area. To achieve a successful implementation of cobots based on the above-mentioned operating systems in manufacturing systems, it is necessary to pay attention specifically to the interfacing of the robotic operating system with the control systems of the manufacturing systems at the process level of the enterprise. Within the practical part, an algorithm with well-defined steps towards the successful implementation of cobots in holonic manufacturing processes is proposed. By setting up an experimental workstation in the laboratory, the proposed procedures are verified at the end of the paper. In the context of the implementation of collaborative robots in enterprises, the paper also discusses cloud computing. The creation of a design for the implementation of a collaborative robot with a human represents the missing link in the whole chain of commercial applications of the latest trends from the field of robotic systems in the industrial sphere.

Photocatalytic technology based on specific band structure of semiconductors offers a promising way to solve the urgent energy and environmental issues in modern society. In particular, hydrogen production from water splitting over semiconductor photocatalysts attracts great attention owing to the clean source and application of energy, which highly depends on the performance of photocatalysts. Among the various photocatalysts, TiO2 has been intensively investigated and used extensively due to its outstanding photocatalytic activity, high chemical stability, non-toxicity and low cost. However, pure TiO2 has a wide band gap of approximately 3.2 eV, which limits its photocatalytic activity for water splitting to generate hydrogen only under ultraviolet light, excluding most of the inexhaustible sunlight for human beings. Fortunately, the band gap of semiconductors can be manipulated, in which introducing oxygen defects is one of the most effective measures to narrow the band gap of titanium oxides. This review starts out by the fundamentals of photocatalytic water splitting for hydrogen production over TiO2, discusses the latest progress in this field, and summarizes the various methods and strategies to induce oxygen defects in TiO2 crystals. Then, the next section outlines the modification approaches of oxygen-deficient titanium oxide (TiO2-δ) to further improve its photocatalytic performance. Finally, a brief summary and outlook of the researches on TiO2-δ photocatalysts for water splitting to produce hydrogen were presented.

The shift towards lean production is gradually replacing traditional mass production, and lean accounting is also being mentioned to evaluate operational efficiency based on the lean philosophy, eliminating waste, and simplifying direct cost aggregation along the value stream to improve productivity, distribution, quality, and service. This study aims to evaluate the impact of various factors on the adoption of lean accounting in Vietnamese garment firms, based on data collected from 242 survey questionnaires completed by managers and accountants of Vietnamese garment firms. Through Cronbach's Alpha test, EFA test, and multiple regression analysis to verify and forecast information, eight determinants affecting the adoption of Lean Accounting in Vietnamese garment firms are arranged in descending order of influence, including Leadership, Size, Cost of implementation, Resources, Accounting department, Education and training, Culture, and Competitive pressure. Based on the findings, recommendations are proposed to management businesses and agencies to address shortcomings in the process of applying lean accounting, contributing to making it one of the most effective tools in promoting product development and continuous improvement, enhancing quality and production efficiency.

The photocatalytic hydrogen evolution reaction (HER) by water splitting has been studied, using catalysts based on TiO2 nanowires (TiO2NWs), which were synthesized by a hydrothermal procedure. This nanomaterial was subsequently modified by incorporating different loadings of gold nanoparticles (AuNPs) on the surface, previously exfoliated MoS2 nanosheets, and CeO2 nanoparticles (CeO2NPs). These nanomaterials, as well as the different synthesized catalysts, were characterized by electron microscopy (HR-SEM and HR-TEM), XPS, XRD, Raman, Reflectance and BET surface area. HER studies were performed in aqueous solution, under irradiation at different wavelengths, which were selected through the appropriate use of optical filters. The results obtained show that there is a synergistic effect between the different nanomaterials of the catalysts. The specific area of the catalyst, and especially the increased loading of MoS2 and CeO2NPs in the catalyst substantially improved the H2 production. Recyclability studies showed only a decrease in activity of approx. 7% after 15 cycles of use, which opens many possibilities regarding the potential use and scaling of these heterostructures in photocatalytic production of H2 from water.

The objective of this study is to design an optimal model predictive control (MPC) strategy using manipulated variables to control the production of a sufficient amount of hydrogen through low temperature autothermal reforming of dimethyl ether (DME), a reforming reaction performed using PdO/ZnO/γ-Al2O3 catalysts coated on honeycomb cordierite ceramics. Experiments and simulation have verified that the optimal activity temperature of the catalyst is 400 °C, and the hydrogen volume fraction in syngas is over 43%. In the implementation of the hydrogen production system, the MPC controller can precisely determine the feed rates of DME, high-purity air, and water based on the space state equation of the reformer, to achieve the anti-disturbance of the reformer temperature. Thus, the reduction of hydrogen yield and sintering of the catalyst as a result of overheating are prevented. As the static and dynamic performance of hydrogen production exhibits excellent tracking of the setpoints, an autonomous, automated, and reliable continuous system was designed to meet the desired hydrogen demand situation. This study shows that an autonomous, automated, and reliable continuous hydrogen production reforming system can be designed to actively respond to the on-board hydrogen usage situation.

The contribution deals with the selection of progressive methods and technologies to improve the management of production processes in the industrial area. The first chapter of the contribution summarises the theoretical starting points for the management of production processes and their progressive concepts. Chapter 2 deals with the analysis of the current state of play in the use of methods and technologies in production management and summarise its problem areas. Chapter 3 presents the design of a system for selecting the appropriate method and technology to improve the management of the production process. The system presented is designed from data collection blocks, a benchmark for the performance of industrial enterprises' production processes, and data mining to gain knowledge of the impact of the methods and technologies used on the performance of production processes. The last block of the system allows the presentation of the obtained results, which sets out the recommendation for the choice of progressive method and technology. The system is partially verified in the last chapter of the contribution.

Precision agriculture (PA) is a holistic, sustainable, innovative systems approach that assists farmers in production management. Adopting PA could improve sustainable food security and community economic sustainability. Developing an understanding of PA adoption attributes is needed to assist extension practitioners to promote adoption and better understand the innovation adoption phenomena. A systematic review of literature was conducted to investigate PA adoption. Thirty-three publications were examined, and four themes were found among the reviewed publications. The results were interpreted using Rogers’ diffusion of innovations framework to address the research objectives. Of the reviewed literature, we found relative advantage and compatibility were two dominant attributes to strengthen the adoption of PA, and the complexity attribute was rarely used to promote the adoption of PA. This study shows that change agents do not fully use five attributes of innovation when they promote PA technology to stakeholders to adopt. Thus, we recommend studies from the agricultural extension specialists’ perspectives in the future may determine contributions to motivate farmers’ adoption of PA, in particular related to complexity.

To increase rice production, fertilizer plays a crucial role in rice yield. In this research, we applied the coupled atmospheric and crop model, which is based on the WRF and CERES-Rice models, to find the appropriate nitrogen fertilizer level for increasing rice yield production in northern Thailand. The model was conducted from October to December in 2011 to 2015. To evaluate the model capability, the output from the model, including meteorological data, i.e., precipitation and temperature, and rice production, as compared to actual observation data. The modeling system shows an acceptable level of output for statistical examination; for example, the R² values were 0.93, 0.76, and 0.97 for precipitation, temperature, and rice production, respectively. To assess the optimization of the nitrogen fertilizer level, we designed 9 experiments: control cases and other cases that were multiplied by a factor of 2 – 10 times the nitrogen fertilizer levels. The model suggested that we can produce worthwhile rice yield production by approximately 4830 kg/ha if we increase the nitrogen fertilizer levels by 36 kg/ha.

The Residential and Industrial zones as is, rely heavily, if not exclusively, on Hydrocarbons. Hydrocarbon thermal machinery such as Spark Ignition-Compression Ignition engines, Gasoline-Diesel generators, Coal-Lignite gasifiers, residential diesel-powered heating systems, Pyrolysis units and so on, are commonly met all around the planet. Such technology practically oxidizes Hydrocarbons to produce either heat, steam or useful mechanical work depending on the application, though energy losses are not, by any means, insignificant. Advanced material processing is an industrial sector who’s energy demand is significant and it is important for the general public to come to terms with the fact that by implementing Hydrogen technology to power such plant while at the same time improving the energy equilibrium of houses(advanced materials), communities would be taking major steps towards Climate Change effects debilitation. The downside of Hydrocarbon thermochemical exploitation can be described by the limited resources-reserves and the gaseous pollutant emissions (CO2, CO, NOx, SOx). In recent years, the Industrial zone as a whole has began taking a turn towards Electrification without having established the necessary infrastructure to support such a transition. Indicatively, at current rate of production, dead Lithium-Ion batteries are projected to reach as high as 11,000 metric tons by 2030, yet there is no recycling scheme in place, not to mention the prospect of that number rising even more, given the recent e-mobility trend. As it pertains to Electrification, such powertrains-machinery require electricity and a battery. Electricity production is mainly achieved through Coal-Lignite gasification, Batteries require metals, among others, for manufacturing, meaning that up-on mining, local water resources are contaminated, another very important ‘aspect’ of Lithium(per say) mining is that child labor is often associated with such processes, a truly despicable act. All of the above paint a crystal-clear picture as to how ‘environmentally friendly’ reckless-rushed Electrification really is. Climate Change is up-on us and it’s effects on the planet are obvious, the most important of which is glacier melting due to rising of the global Temperature. The COVID-19 crisis is a sign of what could come from glacier melting could as ice contains potentially harmful-toxic to humans, biological entities that are sure to be introduced to the general public if we were to continue exploiting mineral resources. Purpose of this paper is to provide a general overview of the technology around Hydrogen.

Atmospheric CO2 concentration, temperature and precipitation escalate and it is critical to investigate the agricultural practices best suited to face such new conditions. An important aspect is soil management, which alters soil organic matter content, nutrients and structure, and thus soil/atmosphere interactions and ultimately production. This in vitro study addresses greenhouse gas (GHG) emissions from two long-term soil management experiments in France. One set of soil columns were managed with either grain legume + cover crops or no grain legumes + bare fallow. The other with either plowed or reduced tillage soils. GHG exchange (CO2, N2O) measurements was conducted under different environmental conditions, before and during growth of barley and eventually with three levels of barley biomass cuts (everything removed, cut halfway, intact). The gas exchange was influenced by time and environmental settings, and to a smaller degree management history, with highly variable emissions of N2O. The environmental treatments induced different patterns of effect depending on the management history of the soils. The gas exchange from soil with grain legume was more responsive to the environmental treatments than the rotation without grain legumes. Depending on the history of tillage, the gas exchange responded likewise differently to the induced environment.

Using the above results from RMS analysis the optimum values were predicted for the independent significant variables (Figure 3) the optimized levels of these variables in combination with other media variables the maximum production was predicted to be 199.90 U/mL. The predicted data were validated through confirmatory experiments performed in triplicates. A 1.29-fold increase in amylase activity against un-optimized (OVAT) medium was achieved in the present study authenticating the efficacy of RSM in process optimization (Figure 4). 2.6 Model validation and scale-up at laboratory scale (5L) bioreactor Once the parameters were standardized in the shake-flasks culture, the experiment was scaled-up to a laboratory-scale bioreactor (5 L). The yield of amylase increased by 1.01 fold (205.69 U/mL), it could be possible because the enzyme production in a bioreactor is higher than in shake-flasks culture as the various critical variable factors such as the dissolved oxygen (DO) and the pH can be optimally controlled at the desired levels [22].

This study aims to determine the impact of climate change on market garden production in the extreme south of Mali through the perception and adaptation of market gardeners to climatic phenomena. The study used two models, namely the probit selection and Heckman results models and multinomial logistic regression, based on data collected from producers. A total of 194 producers were surveyed. The results of Heckman's probit model indicate that experience in agriculture and the educational level of the producers are the two main determinants of producers' perception and simultaneous adaptation to climate change. Among these variables agricultural experience is both positively and negatively correlated with perception.

Plant pathogenic fungi are the largest group of disease-causing agents on crop plants and represent a persistent and significant threat to agriculture worldwide. Conventional approaches based on the use of pesticides raise social concern for the impact on the environment and human health and alternative control methods are urgently needed. The rapid improvement and extensive implementation of RNAi technology for various model and non-model organisms has provided the initial framework to adapt this post-transcriptional gene silencing technology for the management of fungal pathogens. In this review, we describe exogenous RNAi involved in plant pathogenic fungi and discuss small RNA production, formulation, and RNAi delivery methods. We explore some challenges with possible solutions. Furthermore, exogenous RNAi holds great potential for RNAi-mediated plant pathogenic fungal disease control.

This study examined the economics of Philippine Lime or Calamansi production in selected Cities and Municipalities in Nueva Ecija, Philippines. The study was conducted within the rural farming households' framework, which constitutes the Philippine agricultural sector's backbone, producing about 5.8 percent of the total national agricultural output with the Central Luzon area, including the portion of the locale of the study. Using quota sampling, data collected from 50 selected calamansi grower- farmers from top 5 producing area in Nueva Ecija, the study measured the profitability of and the production efficiency of calamansi production in the area. Using a formal interview schedule, primary data was obtained from the sampled farming households. The study revealed that the typical calamansi farmer in the area as reflected in the instrument, thirty-two (32) or 64% which covers the majority of the respondents claimed that they fully owned the land they cultivated. Calamansi yield depends on its age as well. Fertilizer was found to harm output. Majority of them shared the same production and post–production practices, though a slight difference in terms of labor cost was observed. There were some who were already in the industry for quite a long time and learned other farming techniques and practices different from the conventional and were proven effective. For better efficiency, the land area cultivated, the farmers' educational status, accessibility to credit facility, and development of the rural areas and farmers' contact with the extension agents are some of the key issues to address. The local government in cities and municipalities may engage in an intensive campaign in encouraging capitalists to form cooperatives, processing and manufacturing houses to produce calamansi juice and other valuable products out of the calamansi fruit.

Sustainable Development Goal 12 requires countries to achieve responsible consumption and production patterns without exceeding safe environmental limits for natural resource use. However, little is known about how cropland impacts from the agri-food sector contribute to the exceedance of national environmental limits for consumption and production. Using a multi-regional input-output model, we linked the cropland impacts of agri-food production to countries of consumption while considering the exceedance of production-based and consumption-based environmental limits. We defined national consumption-based environmental limits via the fair-share approach and quantified national production-based environmental limits according to the biophysical limit of available arable land. We then classified countries into quadrants according to their exceedance of consumption and/or production environmental limits. We found that the USA, Australia and other high-income countries were exceeding both consumption-based and production-based environmental limits. High-population but low-income countries such as India and China were within safe consumption-based environmental limits but exceeded production-based environmental limits. Brazil and other countries of the Americas incurred substantial environmental costs due to the conversion of forests into cropland to produce food for export. We identified patterns in international trade relationships that could inform national-level responsible agri-food consumption and production patterns across the global supply chain, thereby contributing to Sustainable Development Goal 12. More stringent regulations and commitments in national and international policies are required to reduce the exceedance of consumption-based and production-based environmental limits and avoid exceeding the global land-system change planetary boundary.

The study aimed to elucidate the optimum level of elemental sulfur, fresh cassava root (FCR), and urea and their effect on gas production, ruminal fermentation, thiocyanate concentration, and in vitro degradability. A 3×2×4 in a completely randomized design were conducted. Factor A was level of sulfur at 0%, 1%, and 2% of concentrate dry matter (DM), factor B was level of urea at 2% and 4% of concentrate DM, and factor C was level of the FCR at 0, 200, 300, and 400 mg of the total substrate. The study found that elemental sulfur, urea, and FCR had no interaction effect on the kinetics of gas, ruminal fermentation, hydrogen cyanide (HCN), and in vitro degradability. Elemental sulfur supplementation (P<0.05) significantly increased the gas produced from an insoluble fraction (b), in vitro DM degradability and either neutral detergent fiber or acid detergent fiber degradability, and propionate (C3) concentration while decreased the ruminal HCN concentration. Urea levels showed a (P<0.05) significant increase of the potential extent of gas production, ruminal NH3-N, and total volatile fatty acid (VFA). FCR supplementation (P<0.05) significantly increased the gas produced from an immediate soluble fraction (a), gas produced from insoluble fraction, gas production rate constant, total VFA, C3 concentration, and HCN while decreased ruminal pH, acetate, and butyrate concentration. It could be concluded that 2% elemental sulfur, 4% urea, and 300 mg FCR showed a greater effect on gas production, ruminal fermentation, and HCN reduction.

The study experimentally investigated a novel approach for producing hydrogen from methane cracking in dielectric barrier discharge catalytic plasma reactor using a nanocatalyst. Plasma-catalytic methane (CH4) cracking was undertaken in a dielectric barrier discharge (DBD) catalytic plasma reactor using Ni/MgAl2O4. The Ni/MgAl2O4 was synthesised through co-precipitation followed customised hydrothermal method. The physicochemical properties of the catalyst were examined using X-ray diffraction (XRD), scanning electron microscopy - energy dispersive X-ray spectrometry (SEM-EDX) and thermogravimetric analysis (TGA). The Ni/MgAl2O4 shows a porous structure spinel MgAl2O4 and thermal stability. In the catalytic-plasma methane cracking, the Ni/MgAl2O4 shows 80% of the maximum conversion of CH4 with H2 selectivity 75%. Furthermore, the stability of the catalyst was encouraging 16 hours with CH4 conversion above 75%, and the selectivity of H2 was above 70%. This is attributed to the synergistic effect of the catalyst and plasma. The plasma-catalytic CH4 cracking is a promising technology for the simultaneous H2 and carbon nanotubes (CNTs) production for energy storage applications.

In an age of market liberalization, globalization, and expanding agribusiness, there is a danger that small-scale farmers will find difficulty in fully participating in the market economy. One of the solutions to solve the above situation is to strengthen linkages between farmers and firms through contract farming. The purpose of this study is to assess the factors affecting the level of linkages between businesses and farmers in crop development in Thai Binh province, Vietnam. The two main research methods used were exploratory factor analysis (EFA) and regression analysis with survey data which was conducted from 300 farmers, 10 firms, and 15 factors related to contract-farming. The results indicated that there are 5 factors that significantly affect the level of participation of farmers in the linking process, the order of impacts from strong to weak is as follows: (1) Commitment and sharing of benefits and risks between farmers and firms in the linking process, (2) Issues related to management skills and enterprises capacity of link firms, (3) Price issues that farmers are interested in in the process of implementing links with firms, (4) Policy environment - Institutions related to farmer contracts between firms and farmers, (5) Household awareness about the benefits brought about by farmer contracts with firms. Based on results, a number of specific solutions have been proposed to enhance the efficiency of farming contracts between firms and farmers in cultivation production.

With the year 2020, the world faced a new threat that affects all areas of life, negatively affects production in all areas, and paralyzes social life. The measures and restrictions taken by the country's governments to prevent the epidemic from spreading rapidly in the society with the effect of the Covid-19 virus, which first appeared in China and spread all over the world, brought a new lifestyle. Covid-19 has been much the impact on electricity use and electricity production in the period in Turkey as in other countries. There was a sharp decline in commercial and industrial electricity use. The coronavirus effect has also been reflected in the electricity demand and the consumption amount has undergone a great negative change. Due to the enactment of measures against the new type of coronavirus (COVID-19) epidemic and the partial or full-time curfews, electricity consumption was moved to homes, supermarkets, and hospitals in April 2020 from places where mass consumption is intense, such as industry, workplaces, and educational institutions. In this study, Covid-19 period, the first cases were examined electricity production and consumption in Turkey as of the date it is seen throughout, in comparison with electricity consumption data in the same month of the previous years corresponding to this period, the effects on electricity generation and consumption habits of this period were examined.

United States is the largest producer and the second largest exporter of broiler meat in the world. In the U.S, broiler production is largely converting to antibiotic-free programs which has caused an increase in morbidity and mortality within broiler farms. Escherichia coli and Clostridium perfringens are two important pathogenic bacteria readily found in the broiler environment and result in annual billion-dollar losses from colibacillosis, gangrenous dermatitis, and necrotic enteritis. Broiler industry is in search of non-antibiotic alternatives including novel vaccines, prebiotics, probiotics, and housing management strategies to mitigate production losses due to these diseases. This review provides an overview of the broiler industry and antibiotic free production, current challenges, and emerging research on antibiotic alternatives to reduce pathogenic microbial presence and improve bird health.

In this paper, we consider a make-to-order supply chain which satisfies demand that is dependent on both price and quoted lead -time. The manufacturer chooses the lead -time and the order quantity, and the retailer sets the revenue shares. The interactions between the manufacturer and the retailer are modelled as a Nash Game, and the existence and uniqueness of pure strategy equilibrium are demonstrated. A mechanism that enables the supply chain to coordinate the decisions of the members is developed. Lastly, we also analyze how the supply chain system parameters impact the optimal supply chain decisions and the supply chain performance.

Farmer’s right and their sovereignty is an important issue related with intellectual property rights and agrobiodiversity management. To boost farmer’s right, a conceptual hypothesis is proposed where they choose either a new high yielding variety or the existing one and apply conventional breeding approaches to select the seed for next years in their own fields. Although farmers produce seeds traditionally from several years, they have not been guided with scientific discipline to produce sufficient amount of quality seeds. This new concept suggests trained farmers can use breeding approaches to produce quality seed for their own use.

The operation feasibility of small hydropower plants in mountainous sites is subjected to the run-of-river flow which is also depending on a high variability in precipitation and snow cover. Moreover, the management of this kind of systems has to be performed with some particular operation conditions of the plant (e.g. turbine minimum and maximum discharge) but also some environmental flow requirements. In this context, a technological climate service is conceived in tight connection with end users, perfectly answering the needs of the management of small hydropower systems in a pilot area, and providing forecast of river streamflow together with other operation data. This paper presents an overview of the service but also a set of lessons learnt related to features, requirements and considerations to bear in mind from the point of view of climate services developers. In addition, the outcomes give insight into how this kind of services could change the traditional management (normally based on the past experience), providing a probability range of future river flow based on future weather scenarios according to the range of future weather possibilities. This highlights the utility of the co-generation process to implement climate services for water and energy fields but also that seasonal climate forecast could improve the business as usual of this kind of facilities.

Although laccase has been recognized as a wonder molecule, and green enzyme, the use of low yielding fungal strains, poor production, purification, and low enzyme kinetics have hampered its larger-scale applications. Hence the present research was aimed to select high yielding fungal strains and to optimize the production, purification, and kinetics of laccase of Aspergillus sp. HB_RZ4. Aspergillus sp. HB_RZ4 produced a copious amount of laccase on under meso-acidophillic shaking conditions in a medium containing glucose and yeast extract. A 25 µM of CuSO4 enhanced the enzyme yield. The enzyme was best purified on Sephadex G-100 column. Purified enzyme resembled with the laccase of A. flavus. Kinetics of purified enzyme revealed the high substrate specificity and good velocity of reaction with ABTS as substrate. The enzyme was stable over a wide range of pH and temperature. The peptide structure of the purified enzyme resembled with the laccase of A. kawachii IFO 4308. The fungus decolorized various dyes independent of the requirement of a laccase mediator system (LMS). Aspergillus sp. HB_RZ4 came out as a potent natural producer of laccase, it decolorized the dyes even in absence of LMS and thus can be used for bioremediation.

Climate change is a buzzword in the world. Scientist has approved it as global warming with its projection of undesired and unpredicted frequent extreme events and their vulnerabilities not only at present but also at future. There is an assumption of occurrence of adaptive capacity and behavior of farmers in agriculture production activity at some extent to neutralize climate change vulnerabilities of flood and landslides on paddy production. This paper empirically examines the effects of climate change in paddy production and farmer’s adaptive behaviors to neutralize such climatic shocks and events in paddy production by employing CD production function based econometric model. The study employed primary data collected through 642 household surveys. The study finds that climatic shocks and events have huge loss (60%) in paddy production and revenue income in such plot where farmers have not indigenous knowledge and practices. But both small and larger farmers who have adaptive capacity and behavior with their indigenous knowledge have less loss in paddy production and revenue income, although they have heterogeneity in their socio-economic characteristics (income, asset holding, literacy, experience, land holding and age). The farmers who have used adaptive behavior have indigenous knowledge and experiences including bamboo wall construction to control flood and landslides and seed change to resist climatic shocks and events. In hilly region, the farmers have not sufficient alternative measures, except both adaptive measures because of their poverty, illiteracy and remote locations. The study finds their higher effective level to minimize vulnerabilities to paddy production and revenue per farm plot, although these adaptive behaviors are cost effective and local entity. Comparatively, bamboo wall construction is more effective measure in the paddy production than others are (seed switch) to minimize the flooding materials from the flood and the landslides. Thus, low cost indigenous adaption behavior of farmers is effective measure to climate change and climate change induced disasters and events vulnerability in paddy production.

Coalbed Methane(CBM) production enhancement for single wells is a big problem to CBM industrialization. Low production is due to insufficient gas generation by thermogenic. Luckily, Biogenic gas was found in many areas and its supply is assumed to improve coalbed methane production. Therefore, microbial simulation experiment will demonstrate the effectiveness of the assumption. From microbial simulation experiment on different coal ranks, it is found that microbes can use coals to produce biogas under laboratory conditions. With different temperatures for different experiments, it turns out that the gas production at 35 ℃ is greater than that at 15℃,indicating that 35℃ is more suitable for microbes to produce gas. According to quantitative experiments, adding exogenous nutrients or exogenous bacteria can improve CBM production. Moreover, the production enhancement ratio can reach up to 115% under the condition of adding exogenous bacterial species, while the ratio for adding nutrients can be up to 144%.

This paper studies the mechanism of how China’s state-owned enterprise (SOEs) reform can influences economic growth, and distinguishes the capital efficiency between state-owned and private enterprises. The results show that: 1) the capital allocation efficiency among state-owned enterprises is lower than private enterprise due to an insufficiently released productivity of state-owned enterprises; 2) although with a higher capital allocation efficiency, the improvement of technology progress of private enterprises at a much slower pace compared to its rapidly increasing share in China’s economy. In case of poor allocation with private sector, blindly reforming ownership of state-owned enterprises cannot effectively alleviate the problem of efficiency losses. State-owned enterprise reform can boost economic growth by increasing capital marginal output, improving capital dynamic allocation efficiency, promoting TFP growth and exerting external spillovers on other firms. At present, China is exploring the endogenous power of economic growth, improving the market institutions and promoting the state-owned enterprises reform with positive and steady pace. By properly re-allocation SOEs into the private sector, which has significant influence on improving economic efficiency and promoting sustained economic growth.

The major aim of this study was to investigate and explores the linkage between economic growth, electricity access, energy use and population growth in Pakistan. To check the variables stationarity, Augmented Dickey-Fuller (ADF) and Phillips-Perron unit root test was applied and an Autoregressive Distributed Lag (ARDL) bounds testing approach to co-integration was applied to investigate the dynamic causality link among the study variables. These tests shed light on the long-run connection among the variables; further, the results revealed that electricity access to population, electricity access to urban population, energy usage, population growth, and urban population growth had a significant impact on economic growth, while the electricity access to rural population and rural population growth has a negative impact on the economic growth in Pakistan. According to these findings, study commends that government of Pakistan pay further attention to increase its electricity production from different sources including, hydroelectric, solar, oil and gas and nuclear in order to fulfill the country’s demands. By using ARDL bounds testing approach, this study filled the literature gap regarding economic growth, electricity access, energy use and population growth in Pakistan.

We report the application of a recently proposed approach for modeling biological systems using a maximum entropy production rate principle in lieu of having in vivo rate constants. The method is applied in four steps: (1) a new ODE-based optimization approach based on Marcelin’s 1910 mass action equation is used to obtain the maximum entropy distribution, (2) the predicted metabolite concentrations are compared to those generally expected from experiment using a loss function from which post-translational regulation of enzymes is inferred, (3) the system is re-optimized with the inferred regulation from which rate constants are determined from the metabolite concentrations and reaction fluxes, and finally (4) a full ODE-based, mass action simulation with rate parameters and allosteric regulation is obtained. From the last step, the power characteristics and resistance of each reaction can be determined. The method is applied to the central metabolism of Neurospora crassa and the flow of material through the three competing pathways of upper glycolysis, the non-oxidative pentose phosphate pathway, and the oxidative pentose phosphate pathway are evaluated as a function of the NADP/NADPH ratio. It is predicted that regulation of phosphofructokinase (PFK) and flow through the pentose phosphate pathway are essential for preventing an extreme level of fructose 1, 6-bisphophate accumulation. Such an extreme level of fructose 1,6-bisphophate would otherwise result in a glassy cytoplasm with limited diffusion, dramatically decreasing the entropy and energy production rate and, consequently, biological competitiveness.

Crop productivity is directly dependent to soil fertility. High soil organic carbon (SOC) content in soil is vital as it leads to improved soil quality, increased productivity, and stable soil-aggregates. In addition, with the signing of the climate agreement, there is growing interest in carbon sequestration in landscapes. This paper looks at how SOC can be increased so that it not only contributes to reduction of CO₂, but also translates to increased food production thereby enhancing food security. This synergy between mitigation and enhancing food security is even more relevant for mountain landscapes of the Hindu Kush Himalayan (HKH) region where there remains huge potential to increase CO₂ sequestration and simultaneously address food security in the chronic food deficit villages. Soil samples were collected from seven transects each in Bajhang and Mustang and from 4 land use types in each transect. Samples of soils were taken from two depths in each plot; 0-15 cm below the soil surface and 15-30 cm below the soil surface to compare the top soil and subsoil dynamics of the soil nutrients. The lab analysis was performed to assess the soil texture, soil color, soil acidity in 'power of hydrogen' (pH), macro-nutrients as soil fertility. Secondary data was used to analyze the level of food deficit in the villages. The result shows that most of the sample soils from Mustang were clay (82.1%) which is 46 samples out of 56. The pH value of soil from Bajhang ranged from 5.29 to 9.09. The pH value of soil ranged from 5.65 to 8.81 in Mustang. SOC contents of sampled soils from Bajhang ranged from 0.20% to 7.69% with mean amount of 2.47% ± 0.17. SOC contents of sampled soils from Mustang ranged from 0.51% to 8.56% with mean amount of 2.60% ± 0.25. By land use type, forest land had the highest carbon (C) content of 53.61 t ha^-1 in Bajhang whereas in Mustang, agricultural land had the highest C content of 52.02 tons ha-1. Based on these data, we can say that there is potential for increasing SOC through improved soil health and crop production and soil. Sustainable soil management should be practiced for higher productivity. Livestock may also provide farmyard manure, which can be used to fertilize cultivated soils, which increases soil productivity. Increasing productivity would aid in increasing the access and availability of food in these mountain villages.

Objectives: The aim of this study was to determine why and how adults with attention deficit hyperactivity disorder (ADHD) experience variable impairment and identify the processes and strategies adults with ADHD use to develop positive self-regulation skills. Methods: A mixed cohort of 11 participants (6 female and 5 male) from a university, an adult ADHD clinic and an ADHD support group in the UK were interviewed online between September 2021 and February 2022. Data were collected and analysed simultaneously, inspired by constructivist grounded theory methodology. Results: Participants described a “polar awareness of difference” from others in terms of engagement and ADHD characteristics, and a “polar awareness of consciousness” experienced as the states of chaotic attention and hyperfocus, both of which impact core perceptions of self. Using an infinity paradigm, the results demonstrate unskilled attempts to self-regulate within and between these states using self-absorption or self-transcendence strategies including their inherent challenges and energetic cost. Our results further indicate that at the centre of this dynamic paradigm creative awareness strategies exist, which exemplify polarity awareness and the regulation of that awareness supported by an authentic inner compass (AIC). Conclusions: This paper presents the empirical foundation for the ADHD Creative Awareness Theory (CAT) – a new theory for understanding the experience of ADHD consciousness and environmental engagement. Practice implications are explored, and recommendations include use of the CAT as a framework for understanding and development of inherent self-regulation skills for adults with ADHD.

In vitro circular RNA (circRNA) preparation methods have been gaining a lot of attention recently as several reports suggest that circRNAs are more stable with better performances in cells and in vivo than linear RNAs in various biomedical applications. Self-splicing ribozymes are considered a major in vitro circRNA generation method for biomedical applications due to their simplicity and efficiency in circularization of gene of interest. This review summarizes updates and discusses recently developed self-circularization methods based on the self-splicing ribozyme such as group I and II intron ribozymes and pros and cons of each method to prepare circRNA in vitro.

Nanometer-curved surfaces are abundant in biological systems as well as in nano-sized technologies. Properly functionalized polymer-grafted nanoparticles (PGNs) adhere to surfaces with different geometries and curvatures. This work explores some of the energetic and mechanical characteristics of the adhesion of PGNs to surfaces with positive, negative and zero curvatures using Coarse-Grained Molecular Dynamics (CGMD) simulations. Our calculated free energies of binding of the PGN to the curved and flat surfaces as a function of separation distance show that curvature of the surfaces critically impacts the adhesion strength. We find that the flat surface is the most adhesive, and the concave surface is the least adhesive surface. This somewhat counterintuitive finding suggests that while a bare nanoparticle is more likely to adhere to a positively curved surface than a flat surface, grafting polymer chains to the nanoparticle surface inverts this behavior. Moreover, we studied the rheological behavior of PGN upon separation from the flat and curved surfaces under external pulling force. The results presented herein can be exploited in drug delivery and self-assembly applications.

The goal of this work is to show that the underlying symmetries of effective field theory can be traced to the onset of self-similarity. In particular, we argue that the scale-free structure of fractal geometry lies at the heart of invariance principles in classical and Quantum Field Theory.

The paper is focused on researching the behavior of heating companies in connection with current developments in the electricity market and flexibility in the context of market behavior. The work assesses the increase in profitability through the creation of a technical-economic model using an objective function with profit maximization. The paper objective is presented the procedure and methodology for creating a model using the basic scheme of production processes integrated into the system platform. The result of the work is a comparative analysis of modelled cases of implemented operation deployment according to a defined period and modelling modes in selected time series. The description of individual outputs demonstrates the economic advantage of using combinations of modes of combined electricity and heat production, and non-combined electricity and heat production, including the use of the heat suppression mode because of overproduction of electricity.

Newcastle Disease (ND) remains a critical disease affecting poultry in sub-Saharan Africa. In some countries, repeated outbreaks have a major impact on local economies and food security. Recently, we developed an adenovirus-vectored vaccine encoding the Fusion protein from an Ethiopian isolate of Newcastle Disease Virus (NDV). The adenoviral vector was designed and a manufacturing process developed in the context of the Livestock Vaccine Innovation Fund initia-tive funded by the International Development Research Centre (IDRC) of Canada. The industrial-ly-relevant recombinant vaccine technology platform is being transferred to the National Veteri-nary Institute (Ethiopia) for veterinary applications. Here, we demonstrate that the instillation of the adenoviral vector through the nasal cavity can confer protection to chickens against a lethal challenge with NDV. A manufacturing process using HEK293 suspension cells cultured in stirred-tank bioreactor for the vaccine production is proposed. Taking into consideration supply chain limitations, options for serum-free media selection have been evaluated. A streamlined downstream process including a filtration, an ultrafiltration and a concentration step was de-veloped. With high volumetric yields (infectious titers up to 5 x 109 TCID50/mL) in the culture su-pernatant, the final formulations were prepared at 1010 TCID50/mL, either in liquid or lyophi-lized forms. The liquid formulation was suitable and safe for mucosal vaccination and was sta-ble for 1 week at 37˚C. Both liquid and lyophilized formulations were stable after 6 months of storage at 4˚C. Overall, a manufacturing process for adenovirus vectored vaccine was developed and protective doses were determined using a convenient route of delivery. Formulation and storage conditions were established, and quality control protocols were implemented.

Background: Breastfeeding self-efficacy is a critical factor influencing the initiation and continuation of breastfeeding among mothers. Low self-efficacy affects mothers’ ability to sustain breastfeeding. Several studies have investigated the factors influencing breastfeeding self-efficacy, but none have interconnected maternal, infant, and social support factors. Aims: This study aimed to measure the correlation between maternal and infant factors, social support, and breastfeeding self-efficacy. Methods: A cross-sectional approach was employed in Jember, Indonesia, among 200 breastfeeding mothers. The study population consisted of mothers 17-42 years old who were breastfeeding and who met the following inclusion criteria: mothers who have babies aged 1-6 months, term pregnancy history, wanted pregnancy, and baby weight born ≥ 2500 grams. Maternal and infant factors and social support were determined through interviews and questionnaires. Breastfeeding self-efficacy was examined using The Breastfeeding Self-efficacy Scale Short. The multiple logistic analysis was used for multivariate analysis. Results: Of a total of 200 breastfeeding mothers, 63% had low breastfeeding self-efficacy, and 59.5% of mothers did not exclusively breastfeed. The multiple logistic regression indicated that 74.2% of the factors included in the model influenced breastfeeding self-efficacy. Positive correlations were observed between breastfeeding self-efficacy and feeding type (OR=6.603), breastfeeding frequency (OR=6.220), breastfeeding intention (OR=4.993), and family type (OR=4.001). Conclusion: feeding type, breastfeeding frequency, and family support were the important factors that support breastfeeding self-efficacy.

This paper introduces the self-supervised pretext task of rare visual token enhancement: given an image, the model is trained to push the rarest visual tokens far from all the others. This pretext task slightly-but-consistently improves baseline performances for both registration and few-shot change detection on OSCD, LEVIR-CD and S2looking.

Background: Exercise rehabilitation programs are important for long-term health and wellbeing among people with cardiac and pulmonary disease. De-spite this, many people struggle to maintain their physical activity once reha-bilitation ends. This repeated measures study tracked changes in physical ac-tivity behaviour and motivation during and after completing a communi-ty-based exercise rehabilitation program. Methods: Cardiac and pulmonary exercise rehabilitation patients (N=31), com-pleted six once-monthly measures of physical activity (MET·min), self-determined motivation, intention, and habit strength for rehabilitation ex-ercise (within rehabilitation sessions) and lifestyle physical activity (outside of rehabilitation sessions). Linear regression and random effects models with es-timated marginal means were used to test for associations between physical activity motivation and behaviour and change during and post-rehabilitation. Results: Overall physical activity decreased after rehabilitation (823 MET·min) despite patients becoming more self-determined for lifestyle physical activity during rehabilitation. More self-determined motivation, stronger intentions, and stronger habits were associated with more lifestyle physical activity be-haviour. However, none of these motivation variables were significantly asso-ciated with rehabilitation exercise behaviour. Conclusions: Among community-based cardiac and pulmonary rehabilitation patients, physical activity levels decreased following exercise rehabilitation programs. The findings revealed clear distinctions in the motivation of reha-bilitation exercise compared to lifestyle physical activity. Exercise rehabilitation programs might improve the longevity of outcomes by integrating approaches to enhance lifestyle physical activity beyond the clinic.

Self-healing, stretchable and moldable hydrogels have a great potential application in tissue engineering and soft robotics. Despite great success in reported hydrogels, it is still a great challenge to construct the moldable hydrogels with an ultrafast self-healing performance. Herein, the dynamic double network (DN) composite hydrogels (PBLH) with ultrafast self-healing, stretchable and moldable were successfully constructed by poly (vinyl alcohol) (PVA), borate, ε-poly-L-lysine (EPL) and hyaluronic acid (HA) based on an efficient one-pot method. Fourier transform infrared spectroscopy, X-Ray diffraction and rheological measurements confirmed the formation of dynamic double networks among PVA, B, EPL and HA through the cross-linking of dynamic borate bonds, electrostatic interaction and hydrogen bonding. Having fabricated the dynamic double network structure, the damage gap of the composite hydrogels can heal within 1 min, presenting an excellent self-healing ability. Simultaneously, the DN hydrogels can be molded to various shapes and the length of the DN hydrogels can be stretched to 15 times than original length. In addition, the DN hydrogels exhibited an excellent antibacterial property against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). Our results illustrated that the DN composite hydrogels not only retain the advantages of traditional hydrogels, but also possess ultrafast self-healing, outstanding stretchable and antibacterial properties, presenting a prospective candidate for constructing biomedical materials.

Recently, a large number of Transformer-based solutions have emerged for the trajectory prediction task, but there are shortcomings in the effectiveness of Transformers in trajectory prediction. Specifically, while position encoding preserves some of the ordering information, the self-attention mechanism at the core of the Transformer has its alignment invariance that leads to the loss of temporal information, which is crucial for trajectory prediction. For this reason, we design a simple and efficient strategy for temporal information extraction and prediction of trajectory sequences using the self-attention mechanism and linear layers. Experimental results show that the strategy we designed can effectively combine the advantages of the linear layer and self-attention mechanisms, compensating for the shortcomings of the Transformer. Additionally, we conducted an empirical study to explore the effectiveness of the linear layer and sparse self-attention mechanisms in trajectory prediction.

The concept of intelligence has many applications, such as coatings and cyber security. Smart coatings have the ability to sense and/or response to external stimuli and generally interact with their environment. Self-healing coatings represent a significant advance in improving material durability and performance using microcapsules and nanocontainers loaded with self-healing agents, catalysts, corrosion inhibitors, and water-repellents. These smart coatings can repair damage on their own and restore mechanical properties without external intervention and are inspired by biological systems. Properties that are affected by either momentary or continuous external stimuli in smart coatings can be related to corrosion, fouling, fungal, self-healing, pie-zoelectric, microbiological, etc. These coating properties can be obtained via combinations of either organic or inorganic polymer phases, additives and pigments. In this article, a review on the advancements of micro/nanocapsules for self-healing coatings is reported from the aspect of ex-trinsic self-healing ability. The concept of extrinsic self-healing coatings is based on the use of capsules or multichannel vascular systems loaded with healing agents/inhibitors. The outcome is that self-healing coatings exhibit improved properties compared to traditional coatings. It is mentioned that self-healing anticorrosive coating not only has enhanced passive barrier function, but also realizes active defense. As a result, there is a significant improvement of the service life and overall performance of the coating. Future research should be devoted to refining self-healing mechanisms and developing cost-effective solutions for a wide range of industrial applications.

Video self-supervised learning (VideoSSL) offers significant potential for reducing annotation costs and enhancing a wide range of downstream tasks in video understanding. The ultimate goal of VideoSSL is to achieve human-level video intelligence across a spectrum of tasks, from low-level tasks such as pixel temporal correspondence to high-level complex spatio-temporal tasks like action recognition. However, most existing VideoSSL methods focus on isolated aspects of this spectrum and fail to integrate different levels of task complexity. Our study presents the first comprehensive survey that connects all families of VideoSSL methods. We provide a detailed review of the full spectrum of VideoSSL, from low to high levels, by conceptually linking their self-supervised learning objectives and including a comprehensive categorization. Our extensive evaluation highlights the strengths and limitations of each SSL objective across various downstream task families. We also detail the challenges in current VideoSSL research such as data curation, interpretability, deployment, and privacy concerns, an area that previous surveys have not thoroughly explored. In addressing these challenges, we recognize the strengths of existing methods in addressing these challenges and outline future directions for research.

Competent authorities of many countries, including Belgium, impose control measures (preventing wild bird access to feeders and water facilities, indoor confinement of captive birds, or fencing off outdoor ranges with nets) to professional and non-professional keepers of birds to prevent the spread of avian influenza (AI). Flemish laying hen farmers (FAR, n = 33) and private keepers of captive birds (PRI, n = 263) were surveyed about their opinion on, and compliance with, AI-measures legally imposed during the most recent high-risk period before this survey in 2021. Participants answered questions on a 5-point Likert scale (1 = the worst, 3 = neutral, and 5 = the best). FAR indicated better compliance with the AI-measures compared to PRI, except for confinement with nets. PRI and FAR perceived the level of compliance with AI-measures by other private bird keepers to be lower compared to themselves. FAR regarded the AI-measures as more effective than PRI. To prevent the spread of AI more effectively, national authorities could focus on information campaigns explaining to private bird keepers, in particular, the need for the various control measures that they impose, implement alternative control measures that have broader support or implement stricter enforcement of the control measures.

The phenomenon of emergence in complex systems is vividly exemplified by the coordinated behaviors of ant colonies, where apparent chaos evolves into order. This article delves into the essence of complexity and emergence through interdisciplinary research spanning biology, computer science, and information theory. It begins by examining the foundational principles of swarm intelligence, revealing how simple ant behaviors culminate in sophisticated collective intelligence. The discussion then transitions to the philosophical dimensions of emergent phenomena and the principles of self-organization that underpin systemic order. Key concepts such as ant colony optimization algorithms and stigmergy are synthesized, highlighting their relevance in both natural and artificial systems. The broader societal implications are considered through the lens of collective intelligence, drawing parallels between ant colonies and human social structures. Complementary online resources and multimedia content enrich the narrative, providing accessible insights and dynamic representations of ant intelligence. This convergence of diverse perspectives underscores the remarkable capacity for simplicity to generate complexity, culminating in a profound understanding of collective wisdom.

Our study focused on investigating the impact of Instagram use on body satisfaction and self-esteem among participants aged 20 to 40 years (N = 95) through a cross-sectional survey design in which the Rosenberg Self-Esteem Scale, the Body Shape Questionnaire (BSQ), and ad hoc designed questions were administered. The results highlight the influence of Instagram on body dissatisfaction (p = .005) but not on self-esteem (p = .211). Gender was not found to be an influential factor (p = .173). However, it was found that greater body satisfaction correlates with higher self-esteem and vice versa (p < .001). Finally, we concluded that the number of hours users in the sample spend on Instagram is related to greater body dissatisfaction but not to lower self-esteem.

Background: This study aimed to examine the obesity¬ stress, weight control behavior, and self-control in overweight and obese female university students, and identify the mediating effect of self-control in the relationship between obesity stress and weight control behavior. Methods: This study employed a descriptive correlational design. A total of 109 female university students who were overweight and obese participated in the study. Data were analyzed using descriptive statistics, Pearson's correlation coefficient analysis, and Bootstrapping using Hayes' PROCESS macro for mediation. Results: Significant relationships between obesity stress and weight control behavior (r=0.25, p<0.001), obesity stress and self-control (r=-0.36, p<0.001), and weight control behavior and self-control (r=.26, p<.001) were observed. Self-control showed indirect mediating effect on the relationship between obesity stress and weight control behavior. Conclusion: Therefore, development of programs and strategies for improving self-control is necessary in order to decrease obesity among female university students.

Tungsten and its alloys are considered as a key component in high temperature environment. Self-passivating W-Si-xY alloys with different Y contents made from the powders milled for different times were prepared by mechanical alloying (MA) and spark plasma sintering (SPS). Their microstructures and oxidation resistance were investigated. It is found that the oxidation resistance of the alloys with low Y contents (0Y and 2Y) made from 20 h-milled powders is worse than that of the alloys made from 4 h-milled powders. It is because the protective WO3/SiO2 composite layer is discontinuous. While the alloys with high Y contents (4Y and 6Y) made from 4 h and 20 h-milled powders show good oxidation resistance. Even, the thickness of the oxide layer of the alloys with 4Y and 6Y made from 20 h-milled powders after oxidation at 1000 ℃ for 2 h is 84.0 μm and 70.7 μm, less than that made from 4 h-milled powders. This is due to the size and distribution of W5Si3, Y2Si2O7 aggregates and W-Y-O melt. The synergistic effects of Y contents and milling time on the microstructures and oxidation resistance of the alloys are revealed.

With the development of electricity spot markets, accurate electricity load forecasting enables power generation companies to supply the right amount of electricity, Significantly avoid power waste. As a result, time series forecasting in the field of power can bring significant benefits. Previously, the Informer model successfully introduced the Transformer into long time series forecasting(LTSF) by proposing the ProbSparse self-attention mechanism, which solved the inherent problem of high memory complexity in self-attention. Recent research has further demonstrated the potential of the self-attention for mining complex dependencies. However, the limited amount of historical data has become one of the main challenges in applying deep learning techniques to power LSTF tasks. Previous reserches often add a large number of time covariates to provide more information. In this paper, to address this issue, (i) we design a simple but effective Season-aware Block to enhance the model’s ability to mine artificial prior information in temporal covariates; (ii) we conduct experiments using the provincial power data of Zhejiang Province, China, from 2019 to 2022, and our model outperforms other models, achieving a 19 percent MSE relative improvement; (iii) we conduct ablation experiments to assess the efficacy of the Season-aware Block in extracting temporal periodic features. Furthermore, we elucidate the underlying reasons for the effectiveness of both the self-attention mechanism and the Season-aware Block through visualization experiments.

Background and Objectives: Although there has been growing interest in the association of ADHD with anxiety, depression, suicidal ideation, and self-esteem, there is a lack of consistent results and these associations remain unclear. This study investigated the differential patterns of anxiety, depression, suicidal ideation, and self-esteem with regard to the presence of ADHD. Materials and Methods: The subjects were divided into a patient group and a control group. The patient group included 49 patients diagnosed with ADHD at the department of psychiatry of one university hospital. For the control group, 3,727 students were invited to complete a questionnaire. Of the 1,717 students who responded to the questionnaire, 245 were selected for patient-controlled studies. All the subjects were instructed to complete the Beck Suicide Ideation Scale, Children's Depression Inventory, Beck’s Depression Inventory, State-Trait Anxiety Inventory, and Rosenberg Self-Esteem Scale. Results: ADHD subjects experienced more anxiety, depression, and suicidal ideation as well as lower self-esteem compared to the control group comprising participants without ADHD. Conclusions: These findings suggest that ADHD symptoms may contribute to greater suicidal ideation through experienced depression, anxiety, and low self-esteem in school-aged children. Therefore, appropriate ADHD symptom management is necessary to reduce suicidal ideation among school-aged children with ADHD symptoms.

cGAS is a cytosolic DNA sensor that activates innate immune responses through production of the second messenger 2’3’-cGAMP, which activates the adaptor STING. cGAS senses dsDNA in a length-dependent but sequence-independent manner, and it cannot discriminate self-DNA from foreign DNA. In normal physiological conditions, cellular DNA is sequestered in the nucleus by nuclear envelope and in mitochondria by mitochondrial membrane. When self-DNA leaks into the cytosol during cellular stress, or during mitosis, the cGAS can be exposed to self-DNA and be activated. Recently, many studies have investigated how cGAS keeps inactive and avoids to be aberrantly activated by self-DNA. Thus, the aim of this narrative review is to summarize the mechanisms by which cGAS avoids to sense self-DNA under normal physiological conditions.

Keywords: FTY720, self-assembled nanoparticles, intracerebral hemorrhage, neuroprotection

Inspired by nature's examples such as lotus leaves and insect wings, superhydrophobic surfaces have been extensively studied and engineered. However, achieving superoleophobic surfaces, which repel oils, has proven to be more challenging due to the oils' lower surface tension than water. This article presents a novel, cost-effective technique for fabricating superoleophobic surfaces with enhanced durability. We demonstrate the effectiveness of this technique by using Perfluorooctyltriethoxysilane (PFOTES) and silicon dioxide nanoparticles on stainless steel mesh substrate. The resulting surfaces exhibit remarkable superoleophobic properties by incorporating re-entrant structures, low surface energy, and high surface roughness, making them ideal for oil-repellency applications.

In this unprecedented era of computer-supported and distance learning, it is critical to rethink the way students are supported through vital skills like self-regulation and peer collaboration. A variety of digital media has emerged, allowing learners autonomy while requiring the ability to effectively regulate different components of the educational process for long-term academic success. We reviewed collaboration, communication, and self-regulation in digital learning environments as part of online learning. We discussed how these abilities are reflected in highly cited content. High-impact factor studies were identified using advanced software Herzing Publish or Perish to retrieve highly cited research publications metrics. The search resulted in 272 records from 2010 to 2022, 192 duplicates were identified to remove and 48 JCR articles were shortlisted for review. We examined and reflected on sufficient connections to make firm judgments about correlations of concepts. The review identified prominent themes surfaced in the high impact factor academic publication e.g., digital learning environment, interaction, engagement, feedback, self-efficacy, motivation, meta-cognition, achievement, technology, blended learning, and orientation of ICT. Many studies support different features of SRL &amp; PCL through different tools, access to educators or feedback, encouragement, and through peers. However, all of them discuss the processes that students use to self-regulate learning in these situations. It is suggested to examine whether the effectiveness of certain SRL processes varies by online learning mode.

This paper, which is one of the few in the world dealing with this topic, presented the psychologist's work based on the concepts of mentalization and internal working models (IWMs) of attachment, with an adolescent girl who was prone to nonsuicidal self-injury. Gaga, a student in the first grade of high school, had visible scars from cutting her hands on the inner sides of both forearms. Gaga told the psychologist that her mother believes that this is an attempt to draw attention to her problems, and even a suicide attempt. Together with Gaga, the psychologist made a formulation of her mental difficulties. The main aim of the psychologist's work with Gaga was to control unpleasant impulses and emotions, so as to eliminate self-injury. This aim has been achieved through three global tasks: 1) that Gaga, in the relationship with the psychologist, builds her IWMs as positive, so that she can see herself as a person who is worthy of the love and support of close people; 2) to develop a stable capacity for mentalization; 3) to apply this acquired skills in the interpretation of her affective experiences. The mentalizing approach in working with Gaga was based on an attitude of emotional warmth, acceptance and authentic interest in her inner world. The psychologist's work with Gaga led to her better self-control, which resulted in the cessation of her self-injury. In her work with a psychologist, Gaga acquired positive IWMs, which she transferred into other significant interpersonal relationships.

Consciousness is usually perceived as a state of being aware of one’s environment as well as self. Despite its omnipresence in our life, understanding this concept is challenging. This has given rise to several theories attempting to explain the nature of consciousness, as well as hard and soft problems of consciousness. In fact, the boundaries of consciousness defined by these theories are a topic of continued discussion, particularly in light of the recent advances in artificial intelligence (AI). Some of these theories consider consciousness as a simple integration of information while others purport the need for an agency in the process of integration for an entity to be considered conscious. Some theories consider consciousness as a graded entity and some equate consciousness with content of awareness. In this work, major theories of consciousness are reviewed and compared, focusing on awareness, attention, and sense of self. These findings are interpreted in relation to AI in order to ascertain what makes AI distinct from natural intelligence.

Consciousness is usually interpreted as a state of being aware of one’s environment as well as self, while awareness is understood as knowledge of something. Despite their semantic differences, in philosophy, these terms are often used interchangeably, as is the case of the hard problem of consciousness proposed by Chalmers, which in fact is the hard problem of awareness. Trilogy paradigm of consciousness (or simply “trilogy”) offers a new paradigm where consciousness is the result of a unique interaction between awareness and the decision-making process. By conferring the input of awareness to the decision-making process, a new mental function of awareness-based choice selection (ABCS) or true free will emerges. Likewise, application of the power of decision-making to the process of awareness gives rise to discretionary selection of information for awareness (DSIA) or intentional attention. The intertwined actions of ABCS and DSIA comprise “I” which is the faculty of our consciousness and is what sets natural intelligence (NI) apart from artificial intelligence (AI). Based on trilogy, mind is an unconscious compilation of all mental function excluding ABCS and DSIA that are the essence of consciousness. As humans, we are a union of “I,” our minds, and our bodies.

Peru has one of the highest informal employment rates in Latin America (73%). Previous studies have shown higher prevalence of poor self-perceived health (P-SPH) in informal workers compared to formal. The study’s aim is to analyse the role of working conditions in the association between informality and SPH in urban working population in Peru. We conducted a cross-sectional study based on 3098 workers from the working conditions survey of Peru 2017. Prevalence of P-SPH and exposure to poor working conditions were calculated separated by formal and informal employment and stratified by sex. Poisson regression models were used to assess the association between P-SPH and informal employment, with its prevalence ratios (PR) crude and adjusted for working conditions. Informal employment was 76% in women and 66% in men. Informal workers were more exposed to poor working conditions than formals and reported worse SPH. Workers in informal employment showed higher risk of P-SPH than formals: PR 1.38 [95% CI: 1.16 – 1.64] in women and PR 1.27 [95% CI: 1.08 – 1.49] in men. Adjustment by working conditions weakened the association in both sexes. In women, this association was only partially explained by worse working conditions 1.23 [95% CI: 1.04 – 1.46]. The negative effect on informal workers’ health is partially explained by poor working conditions. However, there is a part of the effect explained by informality per se.