This study probes the probabilistic features of major fire hazards in enclosed spaces to establish their importance to the occurrence of fires onboard ro-ro passenger ships and in turn to raise effective operational countermeasures. Distinct from the previous studies, the present research employs Bayesian Network (BN) analysis to determine the probabilities of fire hazards more effectively. The findings of the research include five critical basic events (BE) identified namely, vehicle engine fire (fuel system fault), vehicle electric fire (electrical equipment defect or short circuit), used car electrical fire, reefer units electrical fire (electrical appliances defects or short circuit), and cargo spontaneous combustion. Additionally, the risk of fire for lithium - ion battery powered vehicles is also highlighted in the process of BN analysis, which prompts the authors to propose preventive measures for mitigating the possibility of fire occurrence on this type of electric vehicles. It is hoped that these measures can be essential justifications for establishing relevant rules regarding carrying LIB vehicles in enclosed spaces on international level.

This paper presents the results of quantitative research regarding the examination of the levels of efficiency of the fire protection system and the training of employees in Electrical power distribution of Serbia for fire protection, ie the analysis of the manner of implementation of fire protection measures, and determining whether these measures are adequately applied. Following the subject set in this way, the aim of the research was set, and that is the scientific analysis of the manner of application of fire protection measures. The results of this research showed that the employees of Electro distribution Belgrade perceive the preparedness of their company highly positively and certain socio-demographic characteristics also affect certain attitudes, especially those related to the experience with fire, the knowledge of employees to react in case of fire, and the choice of the appropriate response, assessment of the readiness of the company and the employees themselves. It was found that knowledge of how to react in case of fire is influenced by gender and level of education; the choice of one of the methods of action in case of fire is influenced by gender; the assessment of the readiness of the employees themselves is influenced by the marital status; the desire of employees to participate in training to increase their preparedness for fires is influenced by gender. The results of the research can be used to improve the preparedness of employees in various organizations to respond to disasters caused by fires.

Researchers have focused on collaborative governance as an effective measure to realise sustainable natural resource management through the participation of various stakeholders. However, the literature has indicated that issues such as power imbalances tend to undermine the effectiveness of collaborative governance. Powerful actors represented by the government tend to control collaborative processes and produce benefits for dominant groups, while less empowered local communities are often deprived of opportunities for livelihood improvement. Although numerous researchers have analysed the key factors that influence the processes and outcomes of collaborative governance, few have identified a concrete measure to reduce the risk of failure, particularly when managing power imbalances in developing countries. This study explored a methodology to address the power imbalances in collaborative governance based on a case study of a participatory peatland fire prevention project implemented in West Kalimantan Province, Indonesia. Semi-structured interviews and questionnaire surveys conducted with project participants suggested that measures such as establishing a joint team of government officers and villagers, providing a common facilitation training programme, training villagers as facilitators, promoting equal knowledge sharing, and allowing villagers to make their own decisions mitigated the power imbalances between the two groups.

An open source computational fluid dynamics (CFD) solver has been incorporated into the WindNinja modeling framework widely used by wildland fire managers as well as researchers and practitioners in other fields, such as wind energy, wind erosion, and search and rescue. Here we describe incorporation of the CFD solver and evaluate its performance compared to the conservation of mass (COM) solver in WindNinja and previously published large-eddy simulations (LES) for three field campaigns conducted over isolated terrain obstacles of varying terrain complexity: Askervein Hill, Bolund Hill, and Big Southern Butte. We also compare the effects of two important model settings in the CFD solver and provide guidance on model sensitivity to these settings. Additionally, we investigate the computational mesh and difficulties regarding terrain representation. Two important findings from this work are: (1) the choice of discretization scheme for advection has a significantly larger effect on the simulated winds than the choice of turbulence model and (2) CFD solver predictions are significantly better than the COM solver predictions at windward and lee side observation locations, but no difference was found in predicted speed-up at ridgetop locations between the two solvers.

Prescribed fire, intentionally ignited low-intensity fires, and managed wildfires, wildfires that are allowed to burn for land management benefit, could be used as a land management tool to create forests that are resilient to wildland fire. This could lead to fewer large catastrophic wildfires in the future. However, we must consider the public health impacts of the smoke that is emitted from wildland and prescribed fire. The objective of this synthesis is to examine the differences in ambient community-level exposures to particulate matter (PM_2.5) from smoke in the United States from two smoke exposure scenarios – wildfire fire and prescribed fire. A systematic search was conducted to identify scientific papers to be included in this review. Web of Science Core Collection and PubMed for scientific papers, and Google Scholar were used to identify any grey literature or reports to be included in this review. Sixteen studies that examined particulate matter exposure from smoke were identified for this synthesis – nine wildland fire studies and seven prescribed fire studies. PM_2.5 concentrations from wildfire smoke were found to be significantly lower than reported PM_2.5 concentrations from prescribed fire smoke. Wildfire studies focused on assessing air quality impacts to communities that were nearby fires and urban centers that were far from wildfires. However, the prescribed fire studies used air monitoring methods that focused on characterizing exposures and emissions directly from and next to the burns. This review highlights a need for a better understanding of wildfire smoke impact over the landscape. It is essential for properly assessing population exposure to smoke from different fire types.

This paper presents the results of hot smoke tests, conducted in a real road tunnel. The tunnel is located within the expressway S69 in southern Poland between cities Żywiec and Zwardoń. Its common name is Laliki tunnel. It is a bi-directional non-urban tunnel. The length of the tunnel is 678 m and it is inclined by 4%. It is equipped with the longitudinal ventilation system. Two hot smoke tests have been carried out according to Australian Standard AS 4391-1999. Hot smoke tests corresponded to a HRR (Heat Release Rate) equal to respectively 750 kW and 1500 kW. The fire source was located in the middle of the road lane imitating an initial phase of a car fire (respectively 150 m and 265 m from S portal). The temperature distribution was recorded during both tests using a set of fourteen thermocouples mounted at two stand poles located at the main axis of the tunnel on windward. The stand poles were placed at distances of 5 m and 10 m. The recorded data were applied to validate of a numerical model built and solved using Ansys Fluent. The calculated temperature distribution matched the measured values.

Fire-tolerant eucalypt forests of south eastern Australia are assumed to fully recover from even the most intense fires but surprisingly very few studies have quantitatively assessed that recovery. Accurate assessment of horizontal and vertical attributes of tree crowns after fire is essential to understand the fire’s legacy effects on tree growth and on forest structure. In this study, we quantitatively assessed individual tree crowns 8.5 years after a 2009 wildfire that burnt extensive areas of eucalypt forest in temperate Australia. We used airborne lidar data validated with field measurements to estimate multiple metrics that quantified the cover, density, and vertical distribution of individual-tree crowns in 51 plots of 0.05 ha in fire-tolerant eucalypt forest across four wildfire severity types (unburnt, low, moderate, high). Significant differences in the field-assessed mean height of fire scarring as a proportion of tree height, and in the proportions of trees with epicormic (stem) resprouts were consistent with the gradation in fire severity. Linear mixed-effects models indicated persistent effects of both moderate- and high-severity wildfire on tree crown architecture. Trees at high-severity sites had significantly less crown projection area and live crown width as a proportion of total crown width than those at unburnt and low-severity sites. Significant differences in lidar-based metrics (crown cover, evenness, leaf area density profiles) indicated that tree crowns at moderate- and high-severity sites were comparatively narrow and more evenly distributed down the tree stem. These conical-shaped crowns contrasted sharply with the rounded crowns of trees at unburnt and low-severity sites, and likely influenced both tree productivity and the accuracy of biomass allometric equations for nearly a decade after the fire. Our data provide a clear example of the utility of airborne lidar data for quantifying the impacts of disturbances at the scale of individual trees. Quantified effects of contrasting fire severities on the structure of resprouter tree crowns provide a strong basis for interpreting post-fire patterns in forest canopies and vegetation profiles in lidar and other remotely-sensed data at larger scales.

This paper is a follow-up to a previous study that was conducted in a research forest and identified the optimal method for Diameter at Breast Height (DBH) estimation as a circular scanning and fitting ellipses to 4cm stem cross-sections at breast height. The aim of this study was to determine whether the identified method is applicable to natural boreal forests as well. The iPad Pro LiDAR scanner was used to acquire point clouds for 15 sites representing a range of natural boreal forest conditions in Ontario, Canada, and estimate DBH. The secondary objective was to determine if tested stand (Species composition, age, density, understory) or tree (Species, DBH) factors affected the accuracy of estimated DBH. Overall, estimated DBH values were within 1cm of actual DBH values for 78 of 133 measured trees (59%). An RMSE of 1.5cm (8.6%) was achieved. Stand age had a large effect (>0.15) on the accuracy of estimated DBH values, while density, understory, and DBH had moderate effects (0.05-0.14). No trend was identified between accuracy and stand age. Accuracy improved as understory density decreased and as tree DBH increased. Inertial Measurement Unit (IMU) and positional accuracy errors with the iPad Pro scanner limit the feasibility of using this device for forest inventories.

In the research, we studied the typical functional plant traits and life forms of plants that colonize forest gaps. In the research, we analysed functional plant traits of plant species growing on five forest gaps in the Dinaric fir-beech forest in Slovenia. The forest gaps were created as a result of natural disturbances. We selected 18 functional plant traits, whose values were obtained from the BiolFlor database. With the help of the JUICE program, we calculated the frequency of its occurrence on individual forest gap for each functional plant trait. Then we calculated Sperman's correlation coefficient at p<0.05, between the occurrence of individual functional plant traits and single forest gap. We found out that forest gaps are mainly colonized by perennials and herbaceous perennials and hamephytes. These are plant species that begin to flower in June and July, bloom for two or three months and are pollinated by insects, mainly hover flys and wild bees. Characteristic of colonizing plant species is also that, in addition to reproducing by seeds and spores, they also reproduce vegetatively. Besides that, birds and forest mammals are the vectors of fruit and seed dispersal of colonizing plant species.

A land cover map of two arctic catchments, nearby the Abisko Scientific Research Station, was obtained from a classification of a Sentinel-2 satellite image and a ground survey performed in July 2022. The two contiguous catchments, Miellajokka and Stordalen, are covered by various ecotypes, from boreal forest to alpine tundra and peatland. The Random Forest algorithm correctly identified 83% of polygon pixels reserved for testing. The developed workflow relied solely on open source software and acquired ground observations. Space organization was directed by the altitude as shown by the intersection of the land cover with the topography. Comparison between this new land cover map and previous ones based on data acquired between 2008 and 2011 demonstrates some trends of vegetation cover evolution in response to climate change in the considered area. The potential applications in terms of permafrost modeling (hiperborea.omp.eu) are finally discussed.

Indigenous trees have great economic potential and ecological benefits for enhancing environmental prosperity, mostly in forestry and the forest products sector in the developing countries of Sub-Sahara Africa. The baobab (Adansonia Digitata L.) is known as the African green jewel in both fruit production and medicinal benefits also remarkable for so many forest products exported across the world. Research conducted in the different Sub-Saharan African sub-regions has shown this iconic tree with a majestic outlook has a priority tree species for local and foreign use and conservation. However, data on the benefits and conservation of baobab trees in Africa, especially the Sub-Saharan countries is limited. This study aimed to assess the predominant geo-graphical distribution of the tree, the indigenous (cultural, socio-economic, ecological, and medical/health) benefits, and the conservation strategies of the baobab resources in Sub-Saharan Africa. The baobab tree's succulent roots, bulbs, branches, fruit, pods, foliage, and petals are all nourishing. Baobab parts have been used for diverse reasons in Africa, some countries of Asia, and Europe for the past two centuries due to their medicinal well-being properties. In addition, the medicinal applications of the plant parts are discussed. Many authors have highlighted the baobab tree as one of the most important trees to be saved and localized in Africa because of its high indigenous usage and commercial worth. Anthropogenic global warming may induce a drop in baobab species, which could inflict negative impacts on African economies. As a result, it's critical to research the species' likely future distribution and develop conservation policies. Literature was consulted for records and availability of this tree in the Western, Central, Eastern, and Southern African species records and it was also analyzed what percentage of the current environment would be appropriate in the future. Recent studies suggested that farmers and the locals be provided free seeds and seedlings to encourage biological rejuvenation to maximize the plant's potential, people should be informed about the additional uses of baobab that have been discovered. Individuals must also be educated on simple sustainable agroforestry activities that can be performed in plant and forest management.

Forest ecosystems make a greater contribution to carbon (C) stocks than any other terrestrial ecosystem. To understand the role of regional forest ecosystems in global climate change and carbon exchange, forest C stock and its spatial distribution within the small (2,300 km2) Liuxihe River basin were analyzed to determine the different contributors to the C stock. Forest C stocks were quantified by measuring the biomass of trees, understory vegetation, litter and roots, as well as soil organic C, using data from field samples and laboratory experiments. The results showed that forests stored 38.04 Tg C in the entire basin, with secondary and planted forests accounting for 89.82% and 10.18%, respectively, of the stored C. Five types of forests, a subtropical evergreen broad-leaved forest, a subtropical coniferous and broad-leaved mixed forest, a subtropical coniferous forest, a timber forest, and a non-wood forest, stored 257.55 ± 15.01, 218.92 ± 9.59, 195.24 ± 18.29, 177.42 ± 17.55, and 117.86 ± 6.04 Mg C ha−1, respectively. In the forest ecosystem C stocks of the basin, soils averagely contribute about 73.78%, not including root underground biomass. It provides a comprehensive method for forest ecosystem carbon investigation and forest management in small basin scale.

As people's consumption habits change, loan plays a crucial role in our modern society. It provides individuals who do not have sufficient money with funds to purchase residential property or start a business. However, for avoiding unpleasant loan defaults, all financial institutions will first assess the borrower's risk index. By predicting the default risk of the borrower to decide whether to lend money. Machine learning algorithms, including random forest, linear regression and so on, have been benefited most of the real-world applications. With the development of machine learning methods, this paper, based on the personal history loan data of an institution studies the loan default risk, and uses the random forest classification model to predict the possibility of loan default. The result showed that the accuracy of this method was 85.62%, which show its application ability of real-world loan prediction and benefits the manager to decide the degree of risk for loan grant.

The challenge of missing data in scientific research prompts researchers to decide between imputing incomplete data or discarding observations, where discarding can lead to information loss. Various methods exist, from simple deletion to sophisticated approaches like Multiple Imputation (MI). However, these methods often fall short with high-dimensional datasets. Multiple Imputation by Chained Equations (MICE) and Random Forest (RF) proximity imputation offer promising alternatives. Therefore, in this paper, we propose integrating MICE with Bayesian random forest (BRF) to enhance imputation accuracy and predictive power, particularly in high-dimensional analyses. Our approach combines MICE’s efficiency with BRF’s robustness, offering a comprehensive solution to missing data challenges. By way of example, we provide empirical evaluations to validate its effectiveness using synthetic data of various missing data scenarios. The results from the simulations showed that the combination of BRF and MICE offered a promising strategy for high-dimensional analysis in the presence of missing data.

The functioning of forest ecosystems depends on the taxonomic and ecological diversity of soil fungi. Urbanization is increasing worldwide and is regarded a major driver of environmental change altering local species assemblages in urban forest. We investigated whether the degree of urbanization and local forest characteristics affect the soil fungal community in 20 beech forests located along a rural–urban gradient in the city of Basel and its suburbs (Switzerland). We analyzed their soil fungal communities by DNA metabarcoding of the rDNA ITS2 region and related these data to local forest vegetation characteristics and soil properties. The number of fungal OTUs in the 20 forests examined ranged from 170 to 303. Richness, diversity and evenness of fungal OTUs were all significantly affected by the degree of urbanization, but in different ways. OTU richness was highest in forests in areas with a low degree of urbanization and lowest in forests in rural areas. In contrast, the diversity of OTUs increased with increasing degree of urbanization. Different fungal phyla and fungal guilds showed distinct patterns in their relative abundance along the rural-urban gradient. The degree of urbanization reduced the relative abundance of symbiotrophic fungi, but increased that of saprotrophic and pathotrophic fungi. Our results show that urbanization alters soil fungal community, which in turn can lead to changes in forest ecosystems.

Forest resources are an important material basis for ecological protection and economic devel-opment, and are responsible for the dual mission of guaranteeing national ecological safety and grain safety. Forest land is an important carrier of forest resources, and forest landowner is a direct component of forest land management. Forest landowners’ willingness to engage in forest man-agement affects whether the important value function of forest resources can be implemented. Are there differences in the willingness and behavior of forest management between ethnic minority foresters and ordinary foresters? How to stimulate the forest management willingness and behavior of forest farmers in ethnic minority areas?These questions will be about the realization of the value of forest resources. Through the analysis of 185 questionnaires in Yunnan Province, this paper clarifies the current situation of forest management of forest farmers in minority areas. Then, using the Sustainable Livelihoods Framework, we select three indicators including the socio-economic at-tributes of individual farmers, the cognition and experience of forest landowners, and policy guidance. And we use the binary logistic regression model to analyze the factors affecting the willingness of forester to participate in forest management. Through the above analysis, we find that: (1) Forest landowners' willingness to engage in forest management in minority regions is relatively high, at 71.98%. (2) Individual farmers’ socioeconomic attributes have the most significant degree of influence on willingness to engage in forest management, while forest landowners' cognitive and related experiences, policy guidance and other related variables influence willingness to engage in forest management at the macro level. (3) Literacy has a significant positive contribution to man-agement intentions, while forest land area, living standard, whether they are compensated by public welfare forest, and whether they participate in the project of returning farmland to forest and grass have a significant negative effect on management intentions. (4) There are significant differences between forest landowners' willingness to engage in forest management and the influencing factors between minority regions and non-minority regions. Finally, we suggest to improve the willingness to engage in forest management and forestry industry development in minority regions through innovative management methods, concentrated and continuous large-scale management, en-couraging capital investment and driving forest landowners to "nearby employment", optimizing the logging quota system and raising the compensation standard for public welfare forests. This study has important practical significance for promoting the realization of forest ecological products value, consolidating the achievement of poverty alleviation in forest areas and realizing rural re-vitalization in China.

Under the “Korean emission trading system in the forestry sector (KETSF)” initiative, the South Korean government has developed several greenhouse gas (GHG) emissions reduction programs that include forestry activities as the cornerstones of the initiative. Forest management is deemed to be a major strategy to implement KETSF; this has been confirmed by most participants in the program, who have shown their preference for forest management projects as the most effective and encouraging strategy to participate in the KETSF program. For a successful implementation of KETSF projects is essential to explore methods that optimize the positive impacts of such strategies, thereby maximizing the economic returns and carbon stocks that result from the implementation of forest management activities. Thus, this study investigated several value-added KETSF projects in South Korea, which included simulated scenarios under two main forest management strategies: one based on an extension of the rotation age, and a second one based on reforestation with new species. Five forest management scenarios were examined and evaluated in their ability to maximize carbon stocks and economic returns. Based on the results, Scenarios 2 and 4 were identified as the best KETSF projects in terms of carbon stock increments. Additionally, the results indicated that projects including reforestation with new species added more economic value than projects that considered an extension of the rotation age. The study also revealed that KETSF projects generated revenue in both scenarios, by either extending the rotation age or by implementing reforestation with new species.

Due to climate change, droughts have been occurring more frequently in Germany in recent years. More frequent and prolonged drought affects the health of trees and increases the risk of forest fires. A large-scale forest fire broke out near Treuenbrietzen, Brandenburg, in the summer of 2018 in pine monospecific forests. In addition to evaluating the damage caused, future reforestation is discussed, which is related mainly to the expectations of the forest owners. A telephone survey of seven affected forest owners was conducted using a semi-structured guided interview. The results from our interview demonstrated the support of private forest owners for mixed forests over monospecific pine forests. Most forest owners do not prioritize economic benefit with the forest land as forestry was not the primary source of income. Instead, the ownership of the forest tends to be linked to idealistic, cultural, and family values. The motives for reforestation vary but are often externally influenced. Different goals of forest owners lead to the challenge of finding consensus among them. We conclude that forestry advice by the federal and state governments is essential, especially on how climate change can affect local forests, to sensitize private forest owners to this problem.

State Forest Management Organizations (SFMOs) play a crucial role in the European forest sector, managing almost half the forests in the region. SFMOs are often managed for timber production only whereas, being publicly owned, they should play an important role in providing a vast range of public goods (e.g. soil protection, biodiversity conservation). Their management goals depend on the history and current conditions of the forest sector at a national level, as well as different challenges and the potential for development. Although there is a lack of knowledge about the current performance of SFMOs, there have been recent changes to their management goals and practices in response to the new demands expressed by society (e.g. transparency, social inclusion). The main purpose of this study is to analyse the current situation of SFMOs by clustering them according to indicators that reflect three pillars of the common understanding of sustainable forest management (SFM) concept. With the help of Principal Component Analysis (PCA), we grouped countries according to common characteristics of the forest sector at the national level. Results show three main clusters of SFMOs in Europe. The first cluster has rather small but commercially-oriented forestry unit together with other business activities and a strong focus on public services. The second sees itself as the protector of public interest, rather than commercially-oriented organisations. The third is mainly profit-seeking. The existence of diverse SFMO clusters shows the possibility of different approaches for SFM with a focus on different goals (e.g. profit gaining, public service delivery).

In this study, seven mortar mixes were prepared by replacing natural sand by crumb rubber ,CR, (10%, 25%, 50%, 60%, 75% and 100%). The properties of mortars, both in their fresh and hardened states, were studied. Key characterisitcs, including density, water absorption coefficient, porosity, thermal conductivity, heat capacity, shrinkage/swelling, elastic modulus, compressive strength, flexure strength, fracture energy and performance after exposure to heat, were evaluated. The results obtained showed that as the CR fraction increased, density, initial setting time, and workability decreased but mortars with CR fractions ranged between 25% and 50% are lightweight and can be used for repairing as they fulfill satndards. It was observed that strengths and stiffness decreased with higher CR content while shrinkage increased for CR percentage higher than 60%. However, up to 50% of CR content the mortars obey to the standards for repair. Interestingly, incorporating up to 50% waste tires proved to improve comfort and thermal resistance without affecting thermal inertia. A slight increase in the mass loss is observed when mortars are exposed to high temperatures. Mortars containing CR between 25% and 50% can be classified as lightweight and thermally insulating mortars, suitable for repairing concrete structures in accordance with industry standards.

The exposure of Mediterranean forests to large wildfires requires mechanisms to prevent and mitigate their negative effects on the territory and ecosystems. Fuel models synthesize the complexity and heterogeneity of forest fuels and allow understanding and modelling of fire behavior. However, it is sometimes challenging to define the fuel type in a structurally heterogeneous forest stand due to the mixture of characteristics from different types and limitations of qualitative field observation and passive and active airborne remote sensing. This can impact the performance of classification models that rely on in situ identification of fuel type as ground-truth, which can lead to a mistaken prediction of fuel types over larger areas in fire prediction models. In this study, a handheld mobile laser scanner (HMLS) system were used to assess its capability to define Prometheus fuel types in 43 forest plots in Aragón (NE Spain). The HMLS system captured the vertical and horizontal distribution of fuel at extremely high resolution to derive high-density three-dimensional point clouds (average: 63,148 points/m2) which were discretized into voxels of 0.05 m3. The total number of voxels in each 5 cm height stratum was calculated to quantify the fuel volume in each stratum, providing the vertical distribution of fuels (m3/m2) for each plot at centimetric scale. Additionally, fuel volume was computed for each Prometheus height stratum (0.60, 2, and 4 m) for each plot. The Prometheus fuel types were satisfactory identified for each plot, which was compared with the fuel type estimated in the field. This led to the modification of the ground-truth in 10 out of the 43 plots, with estimation errors between types 2–3, 5–6, and 6–7. These results demonstrate the ability of HMLS systems to capture fuel heterogeneity at centimetric scales for the definition of fuel types in Mediterranean forests, making them powerful tools for fuel mapping and fire modelling, and ultimately for improving wildfire prevention and forest management.

Fire outbreaks continue to cause damage despite the improvements in fire-detection tools and algorithms. It is still challenging to implement a well performing and optimized approach, which is sufficiently accurate, and has tractable complexity and low false alarming rate. Small amount of fire and identification of fire from a long distance is also a challenge in previously proposed techniques. In this study, we propose a novel hybrid model based on Convolutional Neural Networks (CNN) to detect and analyze fire intensity. 21 convolutional layers, 24 Rectified Linear Unit (ReLU) layers, 6 pooling layers, 3 fully connected layers, 2 dropout layers, and a softmax layer are included in the proposed 57-layer CNN model. Our proposed model performs instance segmentation in order to distinguish between fire and non-fire events. To reduce the intricacy of the proposed model, we also propose a key-frame extraction algorithm. The proposed model uses Internet of Things (IoT) devices to alert the relevant person by calculating the severity of fire. Our proposed model is tested on a publicly available dataset having fire and normal videos. The achievement of 95.25 % classification accuracy, 0.09% False Positive Rate (FPR), 0.65 percent False Negative Rate (FNR), and a prediction time of 0.08 seconds validates the proposed system.

High-rise building fires pose a serious threat to the lives and property safety of the people. The lack of reliable and accurate positioning means is one of the main difficulties faced by rescue. In the absence of prior knowledge of the high-rise building fire environment, the coverage deployment of mobile base stations is a challenging problem that has not received much attention in the literature. This paper studies the problem of autonomous optimal deployment of base stations in high-rise building fire environment based on UAV group. A novel problem formulation is proposed that solves the non line of sight (NLOS) positioning problem in complex unknown environment. The purpose of this paper is to realize the coverage and deployment of mobile base stations in complex and unknown fire environment. The NLOS positioning problem in the fire field environment is turned into the line of sight (LOS) positioning problem through the optimization algorithm. And there are more than three LOS base stations nearby any point in the fire field. A control law which is formulated in a mathematically precise problem statement is developed that guarantees to meet mobile base stations deployment goal and to avoid collision. Finally, positioning accuracy of our method and that of common method were compared. The simulation result showed that the positioning accuracy of simulated firefighter in the fire field environment was improved greatly.

Crop residue burning produces a lot of polluting gases and fine particles, endangering human health, damaging soil structure, and causing fire accidents. In addition to the impact of residue burning on the local environment, pollutants can spread with the wind to more distant areas and impact the air quality of surrounding areas, especially cities. Nevertheless, a comparative analysis of the impact of two common residue burning parameters, the number of residue fire points and residue burned area, on urban air quality indicators has not been reported. In this study, the correlation between these two different residue burning parameters on air quality in Daqing City was investigated comparatively using the Visible Infrared Imaging Radiometer Suite (VIIRS) fire point product, the Moderate-resolution Imaging Spectroradiometer (MODIS) burned area product, and buffer zone analysis. The association between MODIS burned area products and air quality index (AQI) was found to be around 0.8, with a maximum of 0.816 at a buffer zone radius of 50 km. Meanwhile, it was found that the correlation between the number of residue fire points extracted from the VIIRS active fire products and air quality was above 0.6, again with a maximum of 0.745 at a buffer radius of 50 km. Within other levels of buffer zones, the correlation between residue burned area and AQI was consistently higher than that between residue fire points and AQI. By comparing the correlation between VIIRS fire points, MODIS burned area, and AQI with the concentration of each pollutant, we found that the correlation between residue burned area and AQI and the concentration of each pollutant is higher. MODIS burned area monitoring, on the other hand, detects changes in the time series of images taken by satellite at two transit moments to obtain the new burned area and cumulative burned area during this period, allowing the monitoring of fire traces caused by fire points at non-transit moments. From analyzing the correlation between residue fire points, residue burned area, and the concentration of each pollutant (PM2.5, PM10, CO, NO2, SO2, O3), we found significant correlations between residue burning and PM2.5, PM10, CO, and NO2 concentrations, with the highest correlation (R2) of 0.81 for PM2.5. Moreover, the correlation between residue burned area and PM2.5, PM10, CO, and NO2 concentrations was significantly higher than that between the number of residue fire points and their concentrations.

Shutdown for just six days enables land plants to entirely fix CO₂ excess of +4 Gt C per yr. Rebuilding soil organic carbon (SOC) in worm-worked humus is the only practical carbon capture and storage (CCS) capable of freely offsetting annual anthropogenic emissions. A case is made to redirect all available resources towards proven, earthworm-based, organic husbandry. Priority is to safely combat mounting global threats due to irreversible species extinction, perilous climate change and deteriorating human wellbeing (mental/physical health). All three interlinked risks are underpinned by a relentless, yet largely ignored, critical loss of precious topsoil. A first step to topsoil recovery is vermi-composting all vegetable and animal ‘wastes’ for return to the field.

Fire detection from satellite sensors relies on an accurate estimation of the unperturbed state of a target pixel, from which an anomaly can be isolated. Methods for estimating the radiation budget of a pixel without fire depend upon training data derived from the location's recent history of brightness temperature variation over the diurnal cycle, which can be vulnerable to cloud contamination and the effects of weather. This study proposes a new method that utilises the common solar budget found at a given latitude in conjunction with an area's local solar time to aggregate a broad-area training dataset, which can be used to model the expected diurnal temperature cycle of a location. This training data is then used in a temperature fitting process with the measured brightness temperatures in a pixel, and compared to pixel-derived training data and contextual methods of background temperature determination. Results of this study show similar accuracy between clear-sky medium wave infrared upwelling radiation and the diurnal temperature cycle estimation compared to previous methods, with demonstrable improvements in processing time and training data availability. This method can be used in conjunction with brightness temperature thresholds to provide a baseline for upwelling radiation, from which positive thermal anomalies such as fire can be isolated.

Forest recreation can be successfully conducted for the purpose of psychological relaxation, as has been proven in previous scientific studies. During the winter in many countries, when snow cover occurs frequently, forest recreation (walking, relaxation, photography, etc.) is common. Nevertheless, whether forest therapy conducted in a forest environment with a snow cover will also have a positive effect on psychological indicators remains unknown. Furthermore, male subjects frequently participate in forest therapy experiments, whereas females are rarely involved. Thus, in this study, the effectuality of forest recreation during winter and with snow cover was tested on 32 young females. For these reasons, the experiment involved 15-minute periods of relaxation in a forest environment or in an urban environment, in addition to a pre-test under indoor conditions. Four psychological questionnaires (POMS, PANAS, ROS, SVS) were administered to participants before and after interventions. Results showed that participants’ levels of negative mood, as measured by different aspects of the POMS questionnaire (tension-anxiety, anger-hostility, depression-dejection, confusion, fatigue), decreased after exposure to the forest environment. In contrast, both tension-anxiety and anger-hostility increased in the urban environment. The indicator of negative affect from the PANAS questionnaire also increased after exposure to the urban environment, whereas the indicator of positive affect based on PANAS was higher in the forest environment than in the urban environment. Restorativeness and subjective vitality exhibited higher values after exposure to the forest environment in comparison to those from the control and pre-test. The changes in these indicators demonstrates that forest recreation in the snow during winter can significantly increase psychological relaxation in young females, as well as showing that recreation can be successfully conducted under these winter conditions.

The overexploitation of forest resources in the charcoal production basin of the city of Lubum-bashi (DR Congo) is reducing the resilience of miombo woodlands and threatening the survival of the riparian as well as urban human populations that depend on it. We assessed the socio-economic value and availability of plant-based non-timber forest products NTFPs in the rural area of Lubumbashi through ethnobotanical (100 respondents) and socio-economic (90 respondents) interviews, supplemented with floristic inventories, in two village areas selected on the basis of the level of forest degradation. The results show that 60 woody species, including 46 in the degraded forest (Maksem) and 53 in the intact forest (Mwawa), belonging to 22 families are used as sources of NTFPs in both villages. Among these species, 25 are considered priority species. NTFPs are collected for various purposes, including handcrafting, hut building, and traditional medicine. Moreover, the ethnobotanical lists reveal a similarity of almost 75%, indicating that both local communities surveyed use the same species for collecting plant-based NTFPs, despite differences in the level of degradation of the miombo woodlands in the two corresponding study areas. However, the plant-based NTFPs that are collected from miombo woodlands and traded in the urban markets have significant economic value, which ranges from 0.5 to 14.58 USD per kg depending on the species and uses. NTFPs used for handicraft purposes have a higher economic value than those used for other purposes. However, the sustainability of this activity is threatened due to unsustainable harvesting practices that include stem slashing, root digging, and bark peeling of woody species. Consequently, there is a low availability of plant-based NTFPs, particularly in the village area where forest degradation is more advanced. It is imperative that policies for monitoring and regulation of harvesting, and promoting sustainable management of communities’ plant-based NTFPs priority, be undertaken to maintain their resilience.

This essay review explores the concept of climate-smart forestry as an approach to mitigating and adapting to climate change. It highlights the need for a holistic approach to forestry that considers regional differences and synergies between ecosystem services. The essay discusses various management strategies at different scales, including species selection, mixed species cultivation, and the promotion of the bioeconomy. It also examines the trade-offs and synergies between different forest uses and the effects of forest management on ecosystem services. Furthermore, the review addresses major abiotic and biotic damage risks to forests, such as wildfires, windstorms, and bark beetle attacks, and proposes risk management strategies. Lastly, the review delves into the management of peatland forests, discussing the role of drainage, the impact of ditch network maintenance, and the challenges of peat ash fertilization. Overall, the review provides valuable insights into climate-smart forestry and its potential to contribute to climate change mitigation and adaptation.

Forest fires though part of a natural forest renewal process, when frequent and assuming large-scale proportions have detrimental impacts on biodiversity, agroforestry systems, soil erosion, air and water quality, infrastructures, and economy. Portugal (PT) endures extreme forest fires, with a record of burned area in 2017. These extreme wildfire events (EWE) concentrated in few days but with high burned areas, are among other factors, linked to severe fire weather conditions. In this study a comparison between several fire danger indices is performed for a reference period 2001‒2021 and 2017 (May‒October) for the Fire Weather Index (FWI), Continuous Haines Index (CHI), Keetch-Byram drought index (KBDI), Burning Index (BI) and Fire Danger index (FDI). A daily analysis for the so-called Pedrogão Grande wildfire (June 17th) and the October major fires (October 15th) included the Spread Component (SP) and Ignition Component (IC). Results revealed high above average values for all indices for 2017 in comparison with 2001‒2021 particularly, for October. High statistically significant monthly correlations between FWI, FDI and BI were found, along with lower between FWI and CHI. These correlations are depicted in the spatial patterns between FWI and FDI for the two EWE. The spatial distribution of FDI, SC and IC had the best performance in capturing the locations of the occurrence of the two EWEs’. The outcomes allowed to conclude, that since fire danger depends on several factors a multi-index’s diagnosis is highly relevant, though calibration and scale adjustment are needed for PT. The implementation of a Multi-index’s Prediction System should be able to further enhance the ability of tracking and forecast unique EWE, since the shortcomings of some indices are compensated by the information retrieved by others as shown in this study. Overall, a new forecast system can help ensuring the development of appropriate spatial preparedness plans, proactive responses by the civil protection regarding firefighter’s management, suppression efforts to minimize the detrimental impacts of wildfires in Portugal.

Fire is a serious security threat that can lead to casualties, property damage, and environmental damage. However, despite the availability of object detection algorithms, challenges persist in detecting fires and smoke. These challenges include slow convergence speed, poor performance in detecting small targets, and high computational cost limiting deployments. In this paper, Fire smoke and human detection based on ConvNeXt and Mixed encoder (FCM-DETR), an end-to-end object detection algorithm based on Deformable DETR, is proposed. Firstly, we introduce ConvNeXt to take the place of Resnet, which greatly reduces the amount of computation and improves the ability to extract irregular flame features. Secondly, to effectively process multi-scale features, the original encoder is decoupled into two modules. Then Mixed encoder, an innovative encoder structure, is proposed, resulting in excellent performance of multi-scale fire and smoke features fusion. What can’t be overlooked is that the encoder block is compatible with any DETR-based models. Finally, the convergence speed is accelerated and the mean of average precision is improved by applying a novel loss function called Powerful IoU v2. The experimental results indicate that our model achieves the best detection accuracy compared to other models, with mAP reaching 66.7%, mAPs and Accuracyfire achieving impressive 50.2% and 98.05%, respectively.

This concept paper explores possible collective identities for a future wildland fire workforce. Taking inspiration from the work of futurists who foresee an end to the dominant fire exclusion/suppression paradigm, and assuming an emerging fire restoration/resilience paradigm shift replaces it, the paper engages in speculative explorations of the process and product of this paradigm shift on future collective identities for a workforce doing ecological fire management. Social constructionist assumptions from symbolic interactionist sociological theory, Gramscian political theory's concept of hegemony, and New-Social-Movement theory's concept of collective identity all provide the intellectual foundations for the discussion. This concept paper argues that in order to actualize a paradigm shift, more than advances in scientific research or reforms of government policies will be required--the wildland fire community will need to become (or join) a social movement engaged in collective actions. An imaginary social movement, the "Greenfire revolution," is invented to help illustrate how the selected theories and concepts might apply in the social construction of ecological fire management and the collective identities of its future workforce.

As Li-ion batteries use is spreading, incidents in large energy storage systems (stationary storage containers, …) or in large-scale cell and battery storages (warehouse, recyclers, …), often leading to fire, are occurring on regular basis. Water remains one of the most efficient fire extinguishing agents for tackling those battery incidents and large quantities are usually necessary. Since bat-teries contains various potentially harmful components (metals and their oxides or salts, sol-vents…) and that thermal runway induced battery incidents are accompanied with complex and potentially multistage fume emissions (containing both gas and particles) the potential impact of fire run-off water on the environment should be considered and assessed carefully. The tests presented in this paper focus on the analysis of the composition of run-off waters used to spray NMC Li-ion modules under thermal runaway. It highlights that waters used for fire-fighting are susceptible to contain many metals, including Ni, Mn, Co, Li and Al mixed with other carbonaceous species (soot, tarballs) and sometimes undecomposed solvents used in the elec-trolyte. Extra-polation of pollutant concentrations compared with PNEC values showed that, for large scale incidents, run-off water could be potentially hazardous to the environment.

A two-way coupled model between polydisperse particle phases with compressible gases and a density-based coupling implicit solution method combining the third-order MUSCL with QUICK spatial discretization scheme and the second-order temporal discretization scheme are constructed based on the discrete-phase model (DPM) and the stochastic wander model (DRWM) in the Eu-lerian-Lagrangian framework in conjunction with a unitary particulate source (PSIC) approach and the SST k-ω turbulence model. The accuracy of the numerical prediction method is verified using previous supersonic nozzle gas-solid two-phase flow experiments. Numerical simulation of two-phase jet of dry powder extinguishing agent gas with pilot-type supersonic nozzle was carried out to analyze the influence of geometrical parameters such as length ratio rL and area ratio rA of main nozzle on the two-phase flow field as well as on the jet performance indexes such as particle mean velocity vp,a, velocity inhomogeneity Φvp, particle dispersion Ψp, particle mean acceleration ap,a and so on. By analyzing the parameters, we indicate the requirements for the combination of jet performance metrics for different flame types such as penetrating, spreading, and dispersing.

This project involves the development of Fire Suppression System (FSS) leveraging of Home automation system using Graphical System design (LabVIEW) software and Arduino microcontroller for real-time monitoring and control. The system integrates an Infrared (IR) flame sensor, an MQ2 gas sensor to detect and suppress fire hazards efficiently. The LabVIEW interface facilitates real-time monitoring of sensor data, allowing users to visualize and analyze the environmental conditions. Through this system, fires are automatically subdued, enhancing safety without requiring human intervention. This advances fire safety by swiftly containing threats and minimizing potential damage.

This study focuses on the increased risk of high heat release and asphyxiation (toxic gas poisoning) in the event of a fire of polyurethane (PU) and MDF-based building materials, which are commonly used in building fires. Among them, polyurethane (PU) building materials are essential for buildings except in Europe and some other countries due to their excellent thermal insulation performance, but problems of short-term heat release and spread of toxic gases in the event of a fire continue to occur. To overcome these problems, researchers are actively working on introducing various flame retardants into building materials. Therefore, in this study, we produced a laboratory-sized (500mm*500mm) plate flame retardant board that can be utilized as a building material with a lower heat release rate and a lower toxicity index by mixing expanded graphite and ceramic binder as flame retardants in a main material based on the cellulose of waste paper by replacing the existing building materials with a hot-press method. According to the ISO-5660-1 test on the heat release rate of the plate flame retardant board, the THR value was 2.9 (MJ/m2) for 10 minutes, showing an effect of reducing the THR value by 36.3 (MJ/m2) compared to the THR value of 39.2 (MJ/m2) of the specimen made using only paper. In addition, the toxicity index of the flame retardant board was checked through the NES 713 test. As a result, the test specimen showed a toxicity index of 0.7, which is 2.4 lower than the toxicity index of 3.1 of MDF, which is utilized as a conventional building material. Based on the results of this study, the cellulose fire retardant board showed the effect of reducing the heat release rate and toxicity index of building materials in a building fire, which reduces the risk of rapid heat spread and smoke toxicity. This has the potential to improve the evacuation time (A-SET) of evacuees in fires. It is also important to show that recycling waste paper and utilizing it as the main material for building materials can be an alternative in terms of sustainable development.

The spontaneous combustion of coal in goaf is the main cause of mine fire at present. Lignite has become a major hidden danger in mine production safety because of its easy oxidation. In this paper, an innovative strategy was proposed to inhibit the spontaneous combustion of lignite by using the principle of microbial-induced calcium deposition. Based on the optimized culture method, a novel composite inhibitor of Bacillus pasteurelli was prepared. SEM, pore size analysis and FT-IR experiments were carried out simultaneously, and the oxidation properties of lignite before and after inhibition were quantitatively characterized from the perspective of microstructure, and the flame retardant properties of microbial and chemical retardants on coal samples were compared. The results show that a large number of deposited calcium carbonate particles are obviously attached to the surface of lignite after microbial inhibition treatment, which plays a physical oxygen insulation role. At the same time, the total pore volume and specific surface area of the coal sample decreased by 68.49% and 74.01%, respectively, indicating that microbial inhibitors can effectively plug the primary pores of lignite. Based on the peak measurement of 400-4000cm-1 infrared spectrum of coal samples, it is found that the contents of active groups including hydroxyl, carboxyl and methyl/methylene in lignite molecules after microbial inhibition are lower than those in raw coal, especially the methyl/methylene content involved in the initial oxidation reaction decreased by 96.5% compared with the baseline content in raw coal. The results show that the oxidation and self-heating capacity of lignite after microbial inhibition is effectively restrained in the initial spontaneous combustion. The research results of this paper can provide effective solutions for the prevention and control of coal spontaneous combustion risk in mined-out area.

As major natural disasters in grassland areas, fires and dust events seriously threaten human safety, property, and animal husbandry. Furthermore, these phenomena may be mutually reinforcing, which can lead to more severe cascading disasters. However, few studies have been on the mechanisms of grassland fire and dust events disaster chain. Therefore, we selected Dornod aimag (province), a typical temperate grassland, as the study area and analyzed the spatiotemporal variation patterns of grassland fires and dust weather, as well as the effect of grassland fires on dust weather based on MCD64A1 Burnt Area data and SYNOP dust data. The mechanism of grassland fires on dust weather was further investigated using the MOD13A3 vegetation index product and ERA5 wind speed, wind direction, and precipitation data. The results revealed that grassland fires and dust weather varied spatially across the study area. Furthermore, grassland fires occurred mainly in spring (April to May), summer (June), and autumn (October), while dust weather mainly occurred in spring (March to May). Moreover, autumn, winter, and spring cumulative grassland fires (both days and area) substantially affected the spring total dust weather days and dust storm days, particularly the spring cumulative dust storm days. Additionally, higher precipitation in the summer of 2014 resulted in higher vegetation coverage and more fuel in the autumn and winter of 2014, and even in the spring of 2015. As a result, the cumulative grassland fire days was higher, and the area was larger from September 2014 to April 2015, leading to a considerable increase in the cumulative dust storm days in May 2015. This study has important implications for disaster prevention and mitigation, ecological and environmental protection, and sustainable development in grasslands.

As a follow-up to previously published research, this paper examines the responses of a group (n=185) of professional and volunteer firefighters directly involved in fighting extreme wildfire events of the 2017 summer season in Portugal. The data used in this research stem from two open-ended questions in response to a web-based survey: i) lessons learned and ii) proposals for improving the Civil Protection service. The replies were qualitatively examined. Participants exhibit incomplete awareness of extreme wildfires, and their only answers are i) the improvement of both the current organization and the technical and human resources of the suppression model (question 1), and ii) the increase in human and material resources, the single command, the in-dependence from Civil Protection and the valorization of experience, as the main aspects for the improvement of Civil Protection (question 2). Little attention is given to prevention and to the concept of control capacity, respectively. The answers to both questions showcase scarce knowledge of the paradigm shift in reference to the prevention model. The ratios of missing re-plies to both questions were 32.43% and 47.57%, respectively. The work stands out for its novelty and originality, as to our knowledge there is a total lack of similar works in all European Union literature.

Fire is a common disturbance in the Brazilian savanna (Cerrado), wherein high-frequency fires drive the vegetation structure, composition, function, and dynamics of savanna ecosystems. Under climate change pressure, further understanding of fire-vegetation relationships and interactions can provide new approaches for establishing strategies for integrated fire management and promote savanna vegetation recovery post-fire. To understand how 15 years of yearly manipulated burning affects the vertical and horizontal structure of the vegetation, the species composition and diversity metrics (species richness, Shannon's diversity, and Pielou's evenness), and the aboveground carbon stocks, we surveyed all woody plant species with a diameter greater than three centimeters in 15 plots of a typical Brazilian savanna (cerrado stricto sensu) at an experimental research station in central Brazil (Cerrado biome). Fifteen plots (five per treatment) were differently affected by fire events over a decade, comprising three treatments: (i) annual fire, (ii) legacy fire (> 11 years since the last fire event), and control (not burned in the past 30 years). Non-metric multidimensional scaling (NMDS) analysis indicated a significant effect of fire on the species composition among treatments and that some species benefited from fire, such as Erythroxylum suberosum, whereas others propagated better without fire, such as Camisala montana and Dalbergia miscolobium. Over a decade of annual fire events led to decreases in Shannon's diversity, species richness, and stem density, which were significantly lower in the annual fire treatment than in the control and legacy fire treatments. Stem density by diameter and height size class (except for the 1-2 m class and above 8 m) was higher in the control than in the annual fire treatment, but the number of dead trees did not differ between the control and annual fire treatments. Our results also showed that fire was a factor in changes in the evaluated parameters, such as annual fire treatment, which reduced the amount of biomass and, therefore, the carbon stock. This study suggests that, if burned yearly, typical Brazilian savannas can become less biodiverse in terms of woody plant species and negatively affect their fire resilience. Therefore, fire management practices should focus on determining the frequency with which these ecosystems may benefit the most from fire disturbances.

The 2022-2023 Chilean summer showed increased temperatures and similar burned area, compared to the 2016-2017 season, where more than 500,000 hectares were compromised, mainly in the rural areas. After a brief review, it is revealed that the effects of forest fires on soil and hydrological properties are barely debated in Chile. Here, we showed a climatological analysis where temperature records in the 2016-2017 season were unusual, as well as another unexpected increase in the summer of 2022-2023, resulting in high-severity fires known as ‘mega-fires’ or “storm-fires”. Mega-fires affect forest plantations and native forests mainly from 33º S (Maule Region) to 39º S (Los Ríos Region) and they are expected to become frequent due to climate change, moving from the north to the south. We present an overview of the influence of wildfires on soil components in the most affected areas (inland, Coastal, and Andes ranges), their hydrological impacts, and potential erosion risk due to high winter precipitation. We propose several management practices that could help to prevent or mitigate these events, including pre-and post-fire interventions, such as afforestation and seeding, selective logging, mulching, erosion barriers, soil preparation, and dam monitoring. We argue that any effective plan in fire-prone and affected areas should include a combination of actions taken at the hillslope scale at integral ecosystem management, whose effectiveness should be monitored and verified regionally at the watershed scale.

The change in the value of the breaking energy is discussed here for selected steel grades used in building structures after subjecting the samples made of them to episodes of heating in the steady-state heating regime and then cooling in a simulated fire conditions. These changes were recorded based on the instrumented Charpy impact tests, in relation to the material initial state. The S355J2+N, 1H18N9T steels and also X2CrNiMoN22-5-3 duplex steel were selected for detailed analysis. The fire conditions were modelled experimentally by heating the samples and then keeping them for a specified time at a constant temperature of: 600°C (first series) and 800°C (second series), respectively. Two alternative cooling variants were investigated in the experiment: slow cooling of the samples in the furnace, simulating the natural fire progress, without any external extinguishing action, and cooling them in water mist simulating an extinguishing action by a fire brigade. The temperature of the tested samples was set at the level -20oC and alternatively at the level + 20oC. The conducted analysis is aimed at assessing the risk of sudden, catastrophic fracture of load-bearing structure made of steel degraded as a result of a fire previously occurred with different development scenarios.

This paper explores decision analysis on product integration of family security services and residential fire insurance in the London and Taiwan markets by using the proposed mathematical models for counting sustainable value. This paper shows the five main different results between London and Taiwan markets with ten different parameters of the family security market, to find out the optimal number of family security integrated services for each security company in London. The improvement of the risk aversion effect based on risk and financial management will enhance the market share of the private security industries in the London and Taiwan markets. The results of this research can serve as a reference for the decision-making of private security industries on product integration under sustainable value consideration. The research findings highlight the potential benefits for both the private security industry and the insurance industry in their design and negotiation for product integration to improve both of business operation and achieve corporate social responsibility goals to match the sustainability in the future.

A novel coronavirus, named 2019-nCoV, is responsible for current epidemic outbreaks in China and also other countries that cause acute pneumonia that was primarily linked to a seafood wholesale market in Wuhan, China. To control and prevent the existing epidemic outbreaks of coronavirus in China, a precise and easy disinfection/sterilization technique is important to disinfect/sterilize the mass-level peoples and their ambient environments (e.g. atmospheric air/aerosols). Among the disinfection techniques, control fire/flame (CF) could be applied. Large-size CF (LSCF) can be generated by using gas burner, gas cylinder that used in restaurant, coals, kerosene (petroleum), dried straws, dried woods) at entry and exit points of big gathering locations (e.g. hospital, airport, rail stations, seaports, apartments, streets/roads, etc. Additionally, small-size CF (SSCF) can be produced by using gas burner of kitchen, electric heater, kindle or waste papers at individual home and ward/room at hospital. Individual person can be soaked/immersed their hands and their belongings nearby CF for a moment, likely followed sterilization during quantification of the number of bacteria in experimental observation, that can rapidly sterilize the person perfectly. Correspondingly, the ambient air/aerosols moved towards CF due to water evaporation by fire that subsequently refresh all ambient air/aerosols by killing all viruses. Such CF could certainly reach the temperature higher than 56 degree C that could effectively disinfect/sterilize/kill the coronavirus. Therefore, CF could be effectively applied to control and prevent the epidemic outbreaks of coronavirus across China and worldwide.

Nanoparticles of graphene and carbon nanotubes are attractive materials for improvement of mechanical and barrier properties and functionality of biodegradable polymers for food packaging applications. However, the increase of the manufacture and consumption increases the probability of exposure of human and environment to such nanomaterials, this rising questions about the risks of nanomaterials since they can be toxic. For a risk assessment, it is crucial to know whether airborne nanoparticles of graphene and carbon nanotubes can be released from nanocomposites into the environment at their end-life, or they remain embedded in the matrix. In this work the release of graphene and carbon nanotubes from the poly(lactic) acid nanocomposite films were studied for the scenarios of: (i) biodegradation of matrix polymer at the disposal of wastes; and (ii) combustion and fire of nanocomposite wastes. Thermogravimetric analysis in air atmosphere, TEM, AFM and SEM were used to verify the release of nanoparticles from nanocomposite films. The three factors model was applied for the quantitative and qualitative risk assessment to the release of graphene and carbon nanotubes from nanocomposite wastes for these scenarios. Safety concern is discussed in respect to the existing regulations for nanowastes stream.

Forest recreation can be successfully used for the psychological relaxation of respondents and can be used as a remedy for common problems with stress. The special form of forest recreation intended for restoration is forest bathing. These activities might be distracted by some factors, such as viewing buildings in the forest or using a computer in nature, which interrupt psychological relaxation. One factor that might interrupt psychological relaxation is the occurrence of an open dump in the forest during an outdoor experience. To test the hypothesis that an open dump might decrease psychological relaxation, a case study was planned that used a randomized, controlled crossover design. For this purpose, two groups of healthy young adults viewed a control forest or a forest with an open dump in reverse order and filled in psychological questionnaires after each stimulus. A pretest was used. Participants wore oblique eye patches to stop their visual stimulation before the experimental stimulation, and the physical environment was monitored. The results were analyzed using the two-way repeated measures ANOVA. The measured negative psychological indicators significantly increased after viewing the forest with waste, and the five indicators of the Profile of Mood States increased: Tension-Anxiety, Depression-Dejection, Anger-Hostility, Fatigue, and Confusion. In addition, the negative aspect of the Positive and Negative Affect Schedule increased in comparison to the control and pretest. The measured positive indicators significantly decreased after viewing the forest with waste, the positive aspect of the Positive and Negative Affect Schedule decreased, and the Restorative Outcome Scale and Subjective Vitality scores decreased (in comparison to the control and pretest). The occurrence of an open dump in the forest might interrupt a normal restorative experience in the forest by reducing psychological relaxation. Nevertheless, the mechanism of these relevancies is not known, and thus, it will be further investigated. In addition, in a future study, the size of the impact of these open dumps on normal everyday experiences should be investigated. It is proposed that different mechanisms might be responsible for these reactions; however, the aim of this manuscript is to only measure this reaction. The identified psychological reasons for these mechanisms can be assessed in further studies.

The migration routes have facilitated the distribution of mammals from south east Asian mainland to the Sundaland including Java island in the early Pleistocene. One of species that has migrated through that route is antelope-like bovid Duboisia santeng. In the present study, the potential distribution areas and the suitable habitats of D. santeng have been projected and modeled. The modeled habitat was a forest river basin sizing 302.91 Ha in the central of Java island. The model has classified and reconstructed the habitat suitability ranged from low to high back to Pleistocene. The surrounding areas of forest were mostly classified as medium and low related to the limited tree covers. Most suitable habitats were identified in the middle of forest river basin where the tree covers were presented

Polarimetric Synthetic Aperture Radar (PolSAR) images with dual polarization modes have great potential to map FSV by excellent penetration capabilities and distinct microwave scattering processes. However, the response of these SAR data to FSV is still uncertain at non-growing season. To further interpret the response of forest FSV to these dual-polarization SAR images, three types of dual polarization SAR images (GF-3, Sentinel-1, and ALOS-2) were initially acquired in coniferous planted forest at non-growing season. Then, sensitivity between FSV and all alternative features extracted from each type of SAR images were analyzed to express the difference of bands and polarization modes in deciduous (Larch) and evergreen (Chinese pine) forests. Finally, mapped FSVs using single and combined dual polarization images were derived by optimal feature sets and four machine learning models, respectively. The combined effects were also analyzed to clarify the response of FSV to dual polarization SAR images with bands and polarization modes at non-growing season. The results demonstrated that the difference of backscattering energy from different sensors is significant in Chinese pine forests, and the difference is gradually reduced in Larch forests. it is also implied that polarization mode is more important than penetration capability in mapping forest FSV in deciduous forest at non-growing season. By comparing the accuracy of mapped FSV using single and combined images, combined images have more capability to improve the accuracy and reliability of mapped FSV. Meanwhile, it is also confirmed that compensation effect with bands and polarization modes not only have great potential to delay the saturation phenomenon, but also have capability to reduce errors caused by over-estimation.

Visual data on the geographic distribution of carbon storage helps policy maker to formulate countermeasures on global warming. However, Taiwan, as an island showing diversity in climate and topography, had lacked valid visual data in distribution of forest carbon storage between the last to forest surveys (1993-2015). This study established a model to achieve an estimation that capable to demonstrate the distribution of forest carbon storage. This model uses land use, stand morphology, carbon conversion coefficient databases accordingly for 51 types of major forest in Taiwan. An estimation on 2006 was conducted and shows an overall carbon storage of 165.65 Mt C, with forest carbon storage per unit area of 71.56 t C ha–1, where natural forests and plantations respectively contributed of 114.15 Mt C (68.9%) and 51.50 Mt C (31.1%). By assuming no change in land use type, the carbon sequestration from 2006 to 2007 by the 51 forest types was estimated to be 5.21 Mt C yr–1 using historical tree growth and mortality rates. The result reflects the reality of the land use status and event of coverage shifting with time by combining to the two forest surveys in Taiwan.

Growth models of uneven-aged forests on the diameter class level can support silvicultural decision making. Machine learning brings added value to the modeling of dynamics at the stand or individual tree level based on data from permanent plots. The objective of this study is to explore the potential of machine learning for modeling growth dynamics in uneven-aged forests at the diameter class level based on inventory data from practice. Two main modeling approaches are conducted and compared: i) fine-tuned linear models differentiated per diameter class, ii) an artificial neural network (multilayer perceptron) trained on all diameter classes. The models are trained on the inventory data of the Canton of Neuchâtel (Switzerland), which are area-wide data without individual tree-level growth monitoring. Both approaches produce convincing results for predicting future diameter distributions. The linear models perform better at the individual diameter class level with test R2 typically between 50 and 70% for predicting increments in the numbers of stems at the diameter class level. From a methodological perspective, the multilayer perceptron implementation is much simpler than the fine-tuning of linear models. The linear models developed in this study achieve sufficient performance for practical decision support.

This paper compares the Medieval (ca. 400–1500 CE) dynamics of forests from low-mountain (Montcortès; ca. 1000 m a.s.l.) and high-mountain (Sant Maurici; 1900 m a.s.l.) areas of the Iberian Pyrenees, both of which experienced similar climatic forcing but different anthropogenic pressures. The main aim is to identify forest changes over time and associate them with the corresponding climatic and anthropogenic drivers (or synergies among them) to test how different forests at different elevations respond to external forcings. This could be useful to evaluate the hypothesis of general Pyrenean deforestation during the Middle Ages leading to present-day landscapes and to improve the background for forest conservation. The study uses palynological analysis of lake sediments, historical documents and paleoecological reconstructions based on pollen-independent proxies. The two sites studied showed different forest trajectories. The Montcortès area was subjected to intense human pressure during regional deforestation up to a maximum of ca. 1000 CE. Further forest recovery took place until the end of the Middle Ages due to a change in forest management, including the abandonment of slash-and-burn practices. Climatic shifts indirectly influenced forest trends by regulating human migrations and the resulting shifts in the type and intensity of forest exploitation. The highland Sant Maurici forests exhibited a remarkably long-standing constancy and an exceptional resilience to climatic shifts, which were unable to affect forest extension and composition, and to local human pressure, from which they rapidly recovered. The Montcortès and Sant Maurici records did not follow the rule of an irreversible forest clearing during the Middle Ages leading to present-day landscapes. The present Montcortès landscape was shaped after a Medieval forest recovery, a new Modern-Age deforestation and a further forest recovery during the last centuries. The Sant Maurici forests remained apparently untouched since the Bronze Age and were never cleared during the Middle Ages. The relevance of these findings for forest conservation is briefly addressed, and the need for the development of more high-resolution studies on Pyrenean forest dynamics is highlighted.

Forest education is pivotal for achieving the Sustainable Development Goals and promoting sustainable forest management in the face of global challenges. However, existing programs struggle to keep up with rapidly changing crises and uncertainties that contribute to deforestation and forest degradation. To address these challenges, integrating innovative approaches into forest education is crucial. This paper demonstrates the transformative use of a role-playing game as an innovative teaching method for integrated forest management. The game provides students with practical experience and a comprehensive understanding of landscape approaches, using the Congo Basin as a case study. Our research focuses on sustainable forest governance, stakeholder roles, and valuing natural assets and ecosystem services, supporting the transformation of economic, political, and social/cultural relationships at various scales. We highlight the potential of innovative forest education to foster sustainability, trigger critical thinking, resolve conflicts, and prevent costly forest losses.

As time progresses and technology improves, biological data sets are continuously increasing in size. New methods and new implementations of existing methods are needed to keep pace with this increase. In this paper, we present a high performance computing(HPC)-capable implementation of Iterative Random Forest (iRF). This new implementation enables the explainable-AI eQTL analysis of SNP sets with over a million SNPs. Using this implementation we also present a new method, iRF Leave One Out Prediction (iRF-LOOP), for the creation of Predictive Expression Networks on the order of 40,000 genes or more. We compare the new implementation of iRF with the previous R version and analyze its time to completion on two of the world's fastest supercomputers Summit and Titan. We also show iRF-LOOP's ability to capture biologically significant results when creating Predictive Expression Networks. This new implementation of iRF will enable the analysis of biological data sets at scales that were previously not possible.

Prescribed burning and other active forest management treatments have been proven to be essential for maintaining suitable habitat conditions for many wildlife species, including the federally endangered red-cockaded woodpecker (RCW). This study examines the perception of forest management treatments of recreation users participating in various activities (hunting, hiking/backpacking, camping, off-highway vehicle riding, and canoeing/kayaking) in terms of scenic beauty and recreation satisfaction. We used photographic images to capture various forest management treatments of different intensity levels and times after treatments, and assessed users’ perception of scenic beauty and recreation satisfaction. Results indicated variation among users participating in different recreation activities, but that good quality RCW habitat offered both higher scenic beauty and higher recreation satisfaction than poor quality habitat for most user groups. Finally, recreation satisfaction was statistically equal to perceived scenic beauty from both good and poor-quality RCW habitats for most of the user groups, thus suggesting the importance of scenic beauty on forest sites in determining recreation users’ attainment of visit satisfaction. Findings conclude that forest sites developed as good quality RCW habitat in the present state also offer quality experience to recreation users, thus supporting multi-objective forestry practices in public forests.

Forest community connections are crucial to ensure forest stewardship and sustainability. We explored the potential of mushrooming to enable such connections in contexts where these connections have been historically broken, alienating local people from forests. Taking the case of the recent devolution of a community forest (baldios) in central Portugal to the local population, we present a five-year pilot project to rework mycology from a mushroom-centered approach to a mushroom-in-baldios approach. Mushrooms were used as an entry-point to connect the forest ecology with the challenges of governance and community building. The devised activities provided an opportunity for people inside and outside the local community to adventure into the woods and find out more about their socio-ecological history, develop communal and convivial relationships and engage in the responsible gathering of wild mushrooms. However, the hosting of mushroomers to know, value and engage with the community forest recovery has constantly working against the enclosure of mushrooms to provide marketable forms of leisure. The outcome of these activities depends on the relationships established between mushrooms, mycologists, local administrators, commoners and poachers, all operating within a framework that favors the eradication of resources instead of long-term relationships that sustain places.

This study reveals the essential load-bearing characteristics of the steel-concrete composite floor system under fire conditions applying structural stressing state theory. Firstly, the strain data in the entire process of the fire test are modeled as state variables which can present the slab’s stressing state evolution characteristics; Then, the state variables are used to build the stressing state mode and the parameter characterizing the mode. Further, the Mann-Kendall criterion is adopted to detect the leap points in the evolution curves of the characteristic parameters during the entire fire exposure process. Also, the evolution curves of the stressing state modes are investigated to verify the leap profiles around the leap/characteristic points; Finally, the detected leap points are defined as the failure starting points and elastoplastic branching points, which is unseen in the past researches focusing on the failure endpoint defined at the ultimate load-bearing state of the composite floor system. The failure starting point and the elastoplastic branching point are the embodiment of natural law from quantitative change to quality change of a system rather than an empirical and statistical judgment. Hence, both characteristic points avoidably exist in the strain data of the composite floor system undergoing the fire process, which can be revealed through the proper modeling methods and update the existing theories and methods on structural analysis and design in fire.

Post-earthquake fire is considered as a catastrophic secondary disaster to personal and property safety. In this article, an evacuation assessment of a complex rail transit station under the post-earthquake fire for sustainable buildings was conducted from the internal environment and external rescue based on Building Information Modeling (BIM) and Fire Dynamic Simulation (FDS). The internal environment evacuation assessment simulation experiments were conducted in six hypothetical high-risk scenarios. Besides, the external rescue assessment was based on investigation of the route and the rescue time required during different periods of holidays and workdays. The results show that: (1) The influence caused by different size of fire area in the power distribution room is smaller than those in the train at the platform floor. (2) In the case of fire scenarios with the same fire area but different fire locations, the impact on temperature is greater than that on CO concentration in power distribution room. (3) It shows slight differences between single-floor fire and double-floor fire on evacuation of small area fire in power distribu-tion room. Meanwhile, optimized design recommendations are proposed to reduce the risk of emergency evacuation in both internal and external environments of rail transit stations for sustainable future buildings.

Fires are a significant threat to people, property, and environment. One of the requirements for the buildings during fires is ensuring the safe evacuation of persons. The evacuation assessment has usually been based on a comparison of the Required Safe Egress Time (RSET) and the Available Safe Egress Time (ASET). One of the important factors influencing the safe evacuation of persons is smoke, which is an important accompanying phenomenon in the burning of polymers. The smoke layer interface is one basic barrier for effective evacuation. The current calculation technique for assessing the smoke layer interface in the Czech Republic is unsatisfactory. For this reason, a calculation technique CSN has been derived, which has been compared with the selected simple calculation techniques, the zone fire model Consolidated Model of Fire and Smoke Transport (CFAST) and the field type model Fire Dynamics Simulator (FDS). The CSN technique was also compared with a real large-scale experiment. The data were also subjected to statistical evaluation using the root mean square error method (RMSE). The deviations between the NFPA, ISO and CSN calculation techniques, the CFAST and FDS fire models and the implemented experiment ranged from 0.05 to 2.41. The established deviations indicate that the calculation technique CSN will be practically usable.

This paper uses probability method to evaluate the fire safety performance of prestressed steel-concrete beam bridges based on simulation experimental research. Firstly, fire simulation experimental sample analysis was conducted on actual small box girder bridges to obtain the structural response of prestressed steel-concrete structures under fire, which is in line with engineering practice. Next, construct a reliability analysis model for the fire resistance performance of prestressed steel-concrete beam bridges; Combining reliability theory with finite element method, establish a reliability analysis method for the fire resistance performance of prestressed steel-concrete beam bridges. Subsequently, a safety factor evaluation model for the fire resistance performance of prestressed steel-concrete beam bridges was proposed, and a safety factor evaluation method for the fire resistance performance of prestressed steel-concrete beam bridges based on reliability back analysis was established. Finally, based on the analysis of the structural response after a fire in a specific case of a simply supported to continuous prestressed steel-concrete continuous beam bridge project, a structural resistance sample of the prestressed steel-concrete beam bridge is generated through uniform design method, and statistical analysis is conducted. Subsequently, probability methods are used to evaluate the safety of the prestressed steel-concrete beam bridge after a fire. Through analysis, it can be concluded that the time of fire has a significant impact on the structural performance of prestressed steel-concrete beam bridges, and the randomness of parameters has a significant impact on the safety reserve of prestressed steel-concrete beam bridges after fire. It is necessary to pay attention to it in specific engineering practice and strengthen the monitoring and statistics of structural random characteristics.

As in many parts of the world, rural-urban, forest-urban interface areas surrounding urban regions expose the natural areas they interact with to a threat of fire risk that can reach various sizes. This risk has been assessed for various regions of the world using many different methods and numerical models so far. Among these, it is seen that machine learning models have successful applications in risk assessment and risk prediction studies. For the fire risk prediction of Istanbul's yet unurbanized regions, but where the city is anticipated to potentially shift, data was collected using the opportunities provided by Geographic Information Systems and Remote Sensing technologies based on fires that occurred between 2000-2021, and the region was examined. Machine learning methods' Random Forest (RF), Extreme Gradient Boosting (XGB), and Light Gradient Boosting (LGB) models were applied for the classification of factors effective in fire. The best result was given by the RF model with 0.93 accuracy, 0.062 F1 score, and 0.753 Area Under Curve (AUC) value. In the classification of factors in the RF model, the grouping between fire-initiating factors and factors effective in spreading is evident, while this distinction is partially noticeable in the other two models.

In the framework of the FireStorm project, four portable weather stations were installed in the Lousã/Estrela mountain range. Given that the Portuguese Institute for Sea and Atmosphere’s sur-face network has two weather stations installed in this region, the new data allows an improved monitoring of the vertical variability of near-surface variables in this mountainous region. As most of the wildfires in mainland Portugal affect areas with complex terrain with elevations below 1200 m and major fires continue to burn overnight, it is also relevant to monitor the vertical changes of meteorological variables in the nighttime period, as these may exhibit large variability. This study provides the first assessment of the available data, with focus on the summer seasons of 2021 and 2022. The results highlight the large variability that was observed in the region and suggest that the risk of extreme fire behaviour in the nighttime period may be underestimated.

Fire behavior of natural rubber latex foam under different thickness conditions(d=1,2and 5cm)were explored though a little of experiments by using the self-built small scale experimental platform. It can be shown that the flame spread law of thermally thin and thermally thickness are different. Natural rubber latex foam with thickness of 2cm show higher fire risk, which value of flame spread rate, maximum flame height, maximum mass loss rate and maximum temperature is 0.00293m/s, 851.875mm, 1.83g/s, 948K,repectively.That may because the thickness of residue formed of thermally thick materials is larger than the thin one, obstructing the contact of the natural rubber latex foam with fresh air .In addition, a special phenomenon is noticed that during the second stage, the bottom unburned zone located in the four edges(thermally thin material) and middle player(thermally thick material).

This research investigates the exposure of plant species to extreme drought events in the Brazilian Atlantic Forest, employing an extensive dataset collected from 205 automatic weather stations across the region. Meteorological indicators derived from hourly data, encompassing precipitation, maximum and minimum air temperature, were utilized to quantify past, current, and future drought conditions. The dataset, comprising 10,299,236 data points, spans a substantial temporal window and exhibits a modest percentage of missing data. Missing data were excluded from analysis, aligning with the decision to refrain from imputation methods due to potential bias. Drought quantification involved the computation of the Aridity Index, the analysis of consecutive hours without precipitation, and the classification of wet and dry days per month. Mann-Kendall trend analysis was applied to assess trends in evapotranspiration and maximum air temperature, considering their significance. The hazard assessment, incorporating environmental factors influencing tree growth dynamics, facilitated the ranking of meteorological indicators to identify regions most exposed to drought events. The results revealed consistent occurrences of extreme rainfall events, indicated by positive outliers in monthly precipitation values. However, significant trends were observed, including an increase in daily maximum temperature and consecutive hours without precipitation, coupled with a decrease in daily precipitation across the Brazilian Atlantic Forest. No significant correlation between vulnerability ranks and weather station latitudes and elevation were found, suggesting geographical location and elevation does not strongly influence observed dryness trends.

We tested selecting data randomly or proportionally in class imbalanced sample. Collecting data into the training and test set according to the initial ratio of QSOs, galaxies and stars were rec-ommended. We experimented using the original imbalanced data or introducing the class balance technologies: SMOTE, SMOTEENN, SMOTETomek, ADASYN, BorderlineSMOTE1, Border-lineSMOTE2, and RandomUndersampling. The SMOTEENN performed the best in the Sample 1. The LightGBM, CatBoost, XGBoost, and RF were compared when adopting the SMOTEENN using the petroMag_u, petroMag_g, petroMag_r, petroMag_i, petroMag_z, J, H, Ks, W1, W2, W3, W4 magnitudes as features. All of the precisions or recalls exceeded 0.94. The RF cost a little more time than the other three algorithms, but resulted in the best evaluating indicators. Utilizing the SMOTEENN +RF technology, the precision, recall and f1-score for QSOs (galaxies, stars) could achieve 0.98 (0.99, 0.98), 0.99 (0.96, 1.00), 0.98 (0.97, 0.99) respectively in Sample 1. Utilizing the SMOTEENN +RF technology, the precision, recall and f1-score for QSOs (galaxies, stars) could achieve 0.94 (0.96, 0.96), 0.98 (0.90, 0.97), 0.96 (0.93, 0.97) using the petroMag_u, petroMag_g, petroMag_r, petroMag_i, petroMag_z, W1, W2, W3, W4 magnitudes as features.

Depression is considered a widespread mental health problem worldwide. Moreover, anxiety symptoms are very closely related to depression patients, and it is known that the coexistence rate of depression and anxiety diagnosed simultaneously is high. Treatment and preventive management of depression and anxiety are essential for public health. Forest healing is attracting attention as a form of low-cost preventive medicine that is safe and has no side effects. However, although the physiological and psychological effects have been scientifically proven, it is insufficient to reveal a direct relationship between forest healing and depression. This study investigated the benefits of an urban forest healing program on depression and anxiety symptoms of depressive disorders. We employed a randomized controlled trial design. Forty-seven depression patients were randomly divided into an urban forest healing program group and a control group. Measures included the Montgomery-Asberg depression rating scale (MADRS), the Hamilton Anxiety Rating Scale (HARS), and the State-Trait Anxiety Inventory (STAI) questionnaires. Our results revealed that the combination of general treatment and forest healing programs for patients with depression is more effective in improving depression and anxiety than routine treatment alone. We expect our work to serve as a starting point for more sophisticated research in discussing the availability of non-pharmacological treatments in forest healing.

This study investigated the presence and characteristics of Juglans neotropica in three ecosystems in Southern Ecuador: Montane Evergreen Forest, Evergreen Seasonal Lower Montane Forest, and Semideciduous Foot Montane Forest. The main focus was on the species' multipurpose nature as both a fruit and timber source. Six study sites, totaling at least 0.5 hectares each, were established, with four in Loja province and two in Zamora Chinchipe province.The results showed significant differences in dendrometric variables across the sites, with the most favorable growth recorded in The Tundo, where trees exhibited an average diameter at breast height (DBH) of 45.16 cm, basal area (G) of 1.41 m2, total height (TH) of 19.22 m, canopy height (CH) of 13 m, cubic volume (CV) of 3.55 m3, and total volume (TV) of 5.22 m3. The species displayed a clumped distribution pattern, as indicated by a Morisita index greater than 1. Regarding abundance, the highest density of 297 trees per hectare was found in Argelia, while Victoria had the lowest density of 46 trees per hectare. This research highlights the importance of Juglans neotropica as a multipurpose species, providing both valuable fruits and wood resources in the studied ecosystems of Southern Ecuador.

The study was carried out in zone 7 of Ecuador, in ecosystems of the Southern Montane Evergreen Forest of the Eastern Cordillera of the Andes that goes from 2200 to 3000 masl. In the Evergreen Seasonal Lower Montane Forest of Catamayo-Alamor, which ranges from 1600-2000 meters above sea level and finally in the Semideciduous Foot Montane Forest of Catamayo-Alamor, which ranges from 400-1600 meters above sea level. The objective was to know the occurrence, structure and abundance of J. neotropica. The investigation consisted of collecting secondary information on the occurrence of the species, to later verify it in situ. Six sites with areas ≥ 0.5 hectares were identified, four in the province of Loja and two in the province of Zamora Chinchipe. Regarding the structure, it was determined that there are significant statistical differences as well as in the dasometric variables between one site and another, presenting better growths El Tundo with average values in DAP(cm)= 45.16; G(m2) = 1.41; HT(m)= 19.22; HC(m)= 13; VC(m3) = 3.55; VT(m3) = 5.22. Regarding the Morisita index, the species presents adistribution pattern >1. Regarding abundance, it was determined that Algeria presented a maximum of 297 (ind/ha), and La Victoria 46 (ind/ha) with a minimum.

In tropical Africa, forests and savannas are the two most widespread biomes and potentially represent alternative stable states with divergent species composition. A classic, but untested, hypothesis posited by White (1983) suggests that the transition zones between forests and savannas contain a floristically impoverished assemblage with few representatives from each biome. Further, the evolutionary dimension of diversity has received limited attention, despite its importance for understanding the biogeographic history of biomes. Here, we quantify species richness and several measures of evolutionary diversity in 1° grid cells, using c. 300K occurrence records of trees and shrubs combined with biome affiliation data for 3,125 species. We find that assemblages in transition zones hold fewer woody species than assemblages in forest and savanna zones, as posited by White. However, transition zones hold more phylogenetic diversity than expected given their species richness, whether one considers forest and savanna assemblages separately or together. We also show that the Congo basin forest has low levels of phylogenetic diversity given the number of species and highlight south-eastern African savannas as a centre of savanna woody species richness and phylogenetic diversity. Regions with high phylogenetic diversity given the number of both forest and savanna species were centred around the Dahomey Gap and Cameroon, mainly in transition zones. Overall, our study shows that even if floristically impoverished, transition zones lead to unexpectedly high evolutionary diversity, suggesting they are important centres of evolutionary innovation and diversification.

Ecological corridors function as a viable way to mitigate the environmental impact arising from forest fragmentation by interconnecting forest fragments through various techniques. In this context, the objective of this study is to propose a route for the implementation of an ecological corridor in the Itapemirim river watershed. The specific objectives were: (i) to delimit the permanent preservation areas (APP) of the Itapemirim river watershed and compare land use and land cover in the delimited areas; (ii) to calculate landscape ecology indices and select the forest fragments with the highest potential for ecological corridor implementation using Fuzzy logic; (iii) to assess costs and trace the best route for ecological corridor implementation, considering distance and physical impediments; (iv) to assess land costs and expropriation costs to delimit the ecological corridor in the study area. To map land use and land cover, the MapBiomas platform was used, based on Landsat 8 satellite images. The permanent preservation areas were delimited according to criteria established by Law No. 12.651 of May 25, 2012, which establishes parameters, definitions, and limits for APP. The characterization and structural quantification of some landscape ecology indices were performed using the QGIS 3.26 computational application, through the LecoS 3.0.1 plugin and Fragstats 4.2. The connected forest fragments were the Caparaó National Park, the Serra das Torres State Natural Monument, and the fragments selected through the application of Fuzzy logic to the landscape ecology indices. The corridor was delimited according to the lowest cost route, considering land use and land cover, APP, fragment potential, slope, and subnormal clusters. For each cost raster image, its respective statistical weights were calculated using the Analytic Hierarchy Process (AHP) hierarchical method, as well as for the analysis of priority areas for forest restoration, considering land use and land cover, APP, pedology, lithology, and biological importance. The interconnection between protected areas and fragments with the ecological corridor followed the orientation described by CONAMA nº 09/96. Based on the development of the work, the following results were identified: the highest land use and land cover class is pasture. Of the area designated for permanent preservation, 68.58% is in conflicting use with the legislation. The bare land value per hectare of the pasture class is the second highest among the bare land value per LULC values, representing 64.28% of the total. The priority area map showed that 31.86% of the area was classified as of very high or high importance and 42.97% as low or very low priority for forest restoration. Thus, it is concluded that the least cost path algorithm associated with the result generated by the multi-criteria decision method (AHP) constitutes an important tool for planning and implementing an ecological network by taking into account the primary factors for decision-making regarding the location of the best route.

Trees provide key ecosystem services, but the health and sustainability of these plants is under increasing biotic and abiotic threat, including from the growing incidences of non-native invasive plant pests (including pathogens). The island of Ireland (Ireland and Northern Ireland) is generally accepted to have a high plant health status, in part due to its island status and because of the national and international regulations aimed at protecting plant health. To establish a baseline of the current pest threats to tree health for the island of Ireland, the literature and unpublished sources were reviewed to produce a dataset of pests of trees on the island of Ireland. The dataset contains 396 records of pests of trees on the island of Ireland, the majority of pests being arthropods and fungi, and indicating potentially more than 44 non-native pest introductions. The reliability of many (378) of the records was judged to be high, therefore the dataset provides a robust assessment of the state of pests of trees recorded on the island of Ireland. We analyse this dataset and review the history of plant pest invasions, including (i) discussion on notable native and non-native pests of trees, (ii) pest interceptions at borders and (iii) pests and climate change. The dataset establishes an important baseline for the knowledge of plant pests on the island of Ireland, and will be a valuable resource for future plant health research and policy making.

The purpose of this study was to systematically review forest therapy programs designed to decrease the level of depression among adults and subsequently identify the gaps in the literature. This systematic review was conducted in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. The authors independently screened full-text articles from various databases using the following criteria: 1) intervention studies assessing the effects of forest therapy on depression in adults aged 18 years and over; 2) studies including at least one control group or condition; 3) been peer-reviewed; and 4) been published either in English or Korean before July 2016. The Scottish Intercollegiate Guideline Network (SIGN) measurement tool was used to assess the risk of bias in each trial. In the final sample, a total of 28 articles (English: 13, Korean: 15) were included in the present systematic review. This review concluded that forest therapy is one of the emerging and effective interventions for decreasing the level of depression in adults. However, the studies included in this review lacked methodological rigor. Future studies assessing the long-term effect of forest therapy on depression using rigorous study designs are needed.

Following the adoption of the Kunming-Montreal Global Biodiversity Framework (KM-GBF), with the Convention on Biological Diversity serving as its guiding treaty, the European Union (EU) has just reached an agreement on an EU Nature Restoration Regulation. This study carries out a systematic cross-walk between the restoration regulation and the KM-GBF, focusing on their implications for forest ecosystems. This paper identifies areas of alignment, divergence, and potential gaps related to habitat restoration, species protection, climate resilience, and the sustainable use of natural resources. The methodology adopts a grounded approach, starting with the 23 targets outlined in the KM-GBF and proceeding to the 28 articles set out in the restoration regulation. The results highlight the need for better alignment between the KM-GBF, the restoration regulation, and other forest-relevant EU policy instruments. The study stresses the need for a coherent and integrated EU policy approach that can address the diverse challenges and policy objectives facing forests. It concludes that amendments to the restoration regulation have significantly diluted its potential impact, limiting the EU Members States accountability and ability to meet KM-GBF goals and targets. It further stresses the need for strategies that can reconcile divergent EU policy pathways, support forest management and restoration efforts, while aligning with global biodiversity objectives.

We propose a silviculture with a purely biological logic that takes soil into account. The article is divided into three parts: 1) presentation of the issue in the context of biodiversity and forest pro-tection; 2) impact of the soil functioning on forestry; 3) possible implementation of soil functioning in forestry practice, to support and protect a non-or minimally anthropized evolution of the forest. The first chapter illustrates the importance of the forest for the future of the planet and our human species, referring to recently published works on the topic of climate warming and biodiversity. The second illustrates the aspects that link soil dynamics to the silvogenetic cycle, focusing on the humipedon (organic and organo-mineral surface horizons, approximately the first 30 cm of forest soil), and more significant carbon storage in old forests since up to 2/3 is found in the soil. In the third chapter we consider the possibility of lengthening the forestry cycle, to allow the return of nutrients to the soil. Theoretical graphs and distribution models of the number of trees as a func-tion of diameter and age are reported, with examples of logging in uneven Alpine forests, with reference to Swiss fir-beech forests published on the Pro-Silva website.

Findings primarily drawn from literature review and interviews with professional resource persons suggest that although the RMG industry of Bangladesh has made substantial progress in correcting structural risks within factory buildings, fire still remains an unresolved issue posing unceasing threat to safety. These findings are significant for all stakeholders within the global supply chain network of Bangladesh, concerned with improving sustainability of the RMG industry and seeking to outline the responsibilities for each group of actors towards preventing building disasters. Both Tazreen Fashion fire incident and the Rana Plaza building collapse served as ‘critical junctures’ in rapid transfer of physical technology to enhance structural safety and streamline production planning within the RMG manufacturing factories within Bangladesh. However, the transfer of social technology within the supply chain network of a developing nation in areas such as development of organisational safety culture or promoting workplace ethics, requires long-term planning and prolonged practices. The paper thus concludes that in developing countries, transfer of physical technology is more readily achievable than the adoption of social technology.

Chaparral shrublands are the dominant wildland vegetation type in southern California and the most extensive ecosystem in the state. Disturbance by wildfire and climate change have created a dynamic landscape in which biomass mapping is key in tracking the ability of chaparral shrub-lands to sequester carbon. Despite this importance, most national and regional scale estimates do not account for shrubland biomass. Employing plot data from several sources, we built a random forest model to predict above ground live biomass in southern California using remote sensing data (Landsat NDVI) and a suite of geophysical variables. By substituting the NDVI and precipi-tation predictors for any given year we were able to apply the model to each year from 2000-2019. Using a total of 980 field plots, our model had a k-fold cross validation R2 of 0.51 and a RMSE of 3.9. Validation by vegetation type ranged from R2 = 0.17 (RMSE=9.7) for Sierran mixed conifer to R2 = 0.91 (RMSE = 2.3) for sagebrush. Our estimates showed an improvement in accuracy over a two other biomass estimates that included shrublands, with an R2 = 0.82 (RMSE = 4.7) compared to R2 = 0.068 (RMSE = 6.7) for a global biomass estimate and R2 = 0.29 (RMSE = 5.9) for a regional biomass estimate. Given the importance of accurate biomass estimates for resource managers we calculated the mean year 2010 shrubland biomass for the four national forests which ranged from 3.5 kg/m2 (Los Padres) to 2.3 kg/m2 (Angeles and Cleveland). Finally, we compared our estimates to field-measured biomass from the literature summarized by shrubland vegetation type and age class. Our model provides a transparent and repeatable method to generate biomass measure-ments in any year, thereby providing data to track biomass recovery after management actions or disturbances such as fire.

Urban forests are critical infrastructure for mitigating environmental and social challenges cities face. Municipalities and non-governmental entities, among others, often set goals (e.g., tree planting or canopy targets) to support urban forests and their benefits. We focus on canopy goals and develop conceptual underpinnings for an analysis of where additional canopy, as one important dimension of the urban forest, can fit within the landscape, while considering factors that influence where trees can be planted and where canopy can grow – ‘practical canopy.’ We apply this in New York City (NYC) to inform the setting of a canopy goal by the NYC Urban Forest Task Force (UFTF) for the NYC Urban Forest Agenda, which may trigger a virtuous cycle that supports the urban forest there. We further develop framing for a ‘priority canopy’ analysis to understand where urban forest expansion should be prioritized given more context (e.g., environmental hazards, local preferences), which can inform how expansion of the urban forest is achieved. We estimate an opportunity for 15,899 ha of new canopy in NYC given existing opportunities and constraints (practical canopy), which, if leveraged, could result in nearly doubling the canopy as of 2017 (17,253 ha). However, like existing canopy, practical canopy is not evenly distributed, in general, or across jurisdictions and land uses. Relying solely on areas identified as practical canopy to expand the urban forest would exacerbate inequities in its distribution. We discuss how the NYC UFTF established an aspirational but achievable goal of 30% canopy cover by 2035, which was informed by this analysis and guided by priorities of equity, health, and resilience. Achievement of this goal will ultimately require a combination of protecting and stewarding the existing resource, and leveraging opportunities for tree planting. Achieving a more equitable urban forest will also require identification of priority canopy, and, in cases, creation of new opportunities for tree planting and canopy expansion. Overall, the collaborative establishment of such goals based on local context can be instrumental in creating a virtuous cycle, moving conservation actors toward exercising influence and agency within the social ecological system.

The forest transition – or forest-area transition – has been put forward as a land-use concept by A.S. Mather in 1992 (The forest transition. Area 24, 367-379), to describe the historical trend generally observed in the forest area of developed countries, embodied in a V-shaped curve of the forest area over time, and that may serve as a paradigm to understand and anticipate deforestation in the developing world. Well in line with a geographical approach to forests, forest transition has thus been defined as one-dimensional, forest area being the reference state variable. From a forestry perspective, the analysis appears to be reductive, as forests are described by many other state variables than area, including forest growing stock, composition in tree species, or stand structure. Whether the drivers of forest transition (population dynamics, economic modes of production and consciousness, as classified by Mather) also impact these other forest state variables in a general way thus comes forth as a logical issue.From a deductive analysis of forest transition drivers, and from forest trends brought to light in Europe, France, and at other places in the world, we here argue that the forest transition concept can be extended to a multi-dimensional space of forest attributes, characterized by typical ideal dynamics. Cumulative impacts onto forests and irreversible losses in forest biodiversity over a forest transition are hence highlighted. Global change, as a parallel consequence of countries’ developing process, further appears as one additional albeit less coupled dimension of forest transition, as it modifies forest productivity and vitality over time. Since forest ecosystem services and forest profitability primarily depend on such attributes, we argue that the extension of the forest transition concept has significance for land-use change and forest protection issues. A prospect on future changes in the forests of developed countries with the European space as a benchmark is finally proposed that leads to extend the temporal significance of forest transition. Though poorly described, returning forests on abandoned agricultural lands are significant, and deserve greater attention.

The prolonged lockdown imposed to contain the COVID-19 pandemic prevented many people from direct contact with nature and greenspaces, raising alarms for a possible worsening of mental health. This study investigates the effectiveness of a simple and affordable remedy for improving psychological well-being, based on audio-visual stimuli brought by a short computer video showing forest environments, with an urban video as a control. Randomly selected participants were assigned the forest or urban video, to look at and listen early in the morning, and filled questionnaires. In particular, the State-Trait Anxiety Inventory (STAI) Form Y, collected in baseline condition and at the end of the study, and the Part II of the Sheehan Patient Rated Anxiety Scale (SPRAS), collected every day immediately before and after watching the video. The virtual exposure to forest environments showed effective to reduce perceived anxiety levels in in people forced by lockdown in limited spaces and environmental deprivation. Although significant, the effects were observed only in the short term, highlighting the limitation of the virtual experiences. The reported effects might also represent a benchmark to disentangle the determinants of health effects due to real forest experiences, for example, the inhalation of biogenic volatile organic compounds (BVOC).

Protected areas serve as an effective mechanism usually supported by a statute to conserve and protect wildlife-rich areas worldwide. Such extensive external management needs elaborate planning, regular monitoring, and periodic assessment of results. Thus, management effective evaluation (MEE) has emerged as one of the major tools for quantifying the performance of any protected area, globally since 2006. India has successfully conducted a complete round of management effectiveness evaluation of all its terrestrial protected areas (except conservation reserves and community reserves), with 25 such areas already undergoing a repeat assessment. Simultaneously, India biennially carries out a country-wide status of forest cover in all its states and union territories. This study has correlated the trend in change of forest cover for the states that contain those 25 repeat evaluated protected areas with their change in MEE scores over the same period. Our study found a positive correlation between the change in forest cover and the change in management effectiveness score from 2005-06 to 2018-19. Owing to increased protection regimes in the PAs including the degraded areas if they make part of such areas, the habitat often shows recovery. Effective habitat conservation is thus intertwined with the monitoring and preserving the wildlife populations in the protected areas, thereby, reduction in forest cover equally impacts the management scores. However, in states where the loss in forest cover has been reported, more protected areas need to be assessed to plan complementary strategies for both habitat and species conservation.

Conifer bark beetles (Coleoptera: Curculionidae: Scolytinae) are major agents of natural disturbance in temperate forests of the northern hemisphere, capable of killing billions of trees in native forests. The dynamics of these insect populations are influenced by climatic variability. To understand such a relationship, it is necessary to monitor the population fluctuation of the species present over time. In this regard, the objective of the present study was to determine the species community of the genus Dendroctonus, the population fluctuation throughout the months of the year, and the effects of relative humidity, temperature, and precipitation on the fluctuation, at three sites of mixed forests in the Municipality of Bocoyna, Chihuahua, in northern Mexico. For insect monitoring, we used Lindgren funnel traps (with 8 funnels each) baited with semiochemicals. Every two weeks, and during 2 years, we collected, identified, and counted the insects. The identification of the species was based on the external morphology and characteristics of the male seminal rod. Temperature and relative humidity were measured using climate data loggers (HOBOs). We found six Dendroctonus species. We also determined the population fluctuation patterns of D. mexicanus Hopkins, D. frontalis Zimmermann, and D. brevicomis LeConte, species with the highest number of captures at each site. Additionally, the relationship between species abundance and climatic variables was determined. The variable that significantly influenced (P<0.05) abundance was temperature. Relative humidity and precipitation variables did not show a significant relationship (P>0.05).

We investigated the response of leaf photosynthetic capacity to climate warming and its variation among provenances of Larix gmelinii (Dahurian larch). Seedlings of 11 L. gmelinii provenances were transplanted into two common gardens with different climate conditions (control and warming climate). We measured the leaf photosynthetic capacity and explored its influencing factors. The warming treatment significantly increased the maximum net photosynthetic rate (Pmax-a), photosynthetic nitrogen use efficiency (PNUE), maximum carboxylation rate (Vcmax), maximum electron transport rate (Jmax), triose phosphate utilization rate (TPU), mesophyll conductance (gm), leaf nitrogen content (Narea), and chlorophyll content (Chlm). The Pmax-a was significantly positively associated with Vcmax, Jmax, TPU, gm, and Narea, and the slope of the correlations between Pmax-a and Vcmax, Jmax, and TPU was steeper in the warming treatment. The responses of Pmax-a, PNUE, Vcmax, Jmax, TPU, Narea, and Chlm to warming differed among provenances. The effects of warming on Pmax-a, Vcmax, Jmax, and TPU increased and then decreased as the aridity index of the original site increased. Overall, the warming treatment improved the photosynthetic capacity of L. gmelinii, but the extent of the improvement varied among provenances. These findings provide insights into the mechanisms underlying the responses of L. gmelinii to climate warming.

In regenerated oak forests, weeds are present throughout the year, the ones appearing in early spring representing a major problem. Hence, the aim of this study was to examine herbicides for early spring broadleaved weed control in the regenerated oak forests while the seedlings are in a dormant stage. During 2019 and 2020 two experiments were set up in regenerated pedunculate oak forests with 2-yar and 3-year-old seedlings and two herbicides were applied in two doses: fluroxypyr at dose 360 g a.i. ha-1 and 540 g a.i. ha-1 and clopyralid at dose 100 g a.i. ha-1 and 120 g a.i. ha-1. The results from the two-year investigations showed that fluroxypyr and clopyralid significantly reduced early spring broadleaved weeds in the regenerated pedunculate oak forests but both doses of fluroxypyr provided greater control of presented weeds than the applied doses of clopyralid. The manual weeding reduced broadleaved weeds in experiments, but that method did not have a long-term effect on the reduction of weeds. Applied doses of herbicides fluroxypyr and clopyralid did not cause phytotoxicity symptoms in dormant oak seedlings. All investigated treatments significantly reduced fresh broadleaved weed biomass compared to the control. Generally, it can be concluded that fluroxypyr and clopyralid can be successfully used for control of many early spring broadleaved weeds in the regenerated pedunculate oak forests, but oak seedlings must be in the dormant stage.

Ammonia is an atmospheric pollutant, predominantly emitted from agriculture, leading acidification and eutrophication of soil and water and contributing to secondary PM2.5. The implementation of accurate emission inventories with high spatial and time resolution plays a fundamental role in the development of air modelling simulation and in the impact assessment of actions for air quality improvement. The development and release of new algorithms and the increase of data availability are supporting the implementation of machine learning approaches in environmental and air quality data analysis. In this paper we present a methodology developed by the application of the Random Forest algorithm to bottom-up local emission inventories of ammonia to validate annual time series of ammonia emissions and calculate high resolution temporal profiles. The model has been trained and tested by the hourly measurements of ammonia concentrations and atmospheric turbulence parameters starting from a constant emission scenario. The initial values of emissions are calculated based on a bottom-up emission inventory detailed at the municipal basis and considering a circular area of about 4 km radius centered on measurement sites. By comparing predicted and measured concentrations, the emissions are modified, the model's training and testing are repeated, and the model converges to a very high performance in predicting ammonia concentrations and establishing an hourly time changing emission profile. The site-specific emissions profiles, estimated by the proposed methodology, clearly show a nonlinear relation with measured concentrations and allow to identify the effect of atmospheric turbulence on pollutant accumulation. The estimated time series well confirm the available data of the emission inventories and the monthly emission profiles have been compared with estimated data from satellite.

Tropical forests provide habitats for diverse flora and fauna. In addition, they are essential in regulating the climate while at the same time millions of people depend on them for their livelihoods. As seen by rising political commitment and worldwide promises to reduce rates of deforestation and boost restoration of degraded forest ecosystems, forests are becoming more widely acknowledged for their role as a nature-based solution to many sustainable development concerns. Understanding tropical forest dynamics and their conservation have so become more important. This study analyzed, the forest stand structure, tree species composition, abundance and diversity and the regeneration status of Londiani Forest. Londiani Forest is divided into three blocks, namely Kedowa, Chebewor and Londiani and from each of these blocks belt transects 25 m wide and 1 km long were established 100 m from the edge of the forest to reduce edge effects. At every 200 m along the transect, 25 m × 25 m quadrats were set up in which, an inventory of all tree species was done. For tree species that could not be identified in the field, the local name was provided by para-taxonomists who participated in the data collection and the species name was later identified with the help of a taxonomist or a manual of woody tree species of Londiani Forest. The diameter at breast height (DBH) was measured at 1.3 m from the ground using a diameter tape. Tree height was measured using a Suunto angular clinometer. A nested quadrat 5 m x 5 m quadrat within the 25 m x 25 m quadrat was used to sample saplings while a 1 m x 1 m quadrat was used for sampling seedlings. Regeneration status was assessed using the number of seedlings and saplings. Stumps of trees cut were counted including identifying tree species from which the tree stump was derived. Data from the quadrats were entered into Microsoft Excel. Total stem density, species density, basal area, species basal area, relative density and species diversity were determined. A total of 1,308 individual trees belonging to 34 different species from 24 families were recorded. Kedowa had the highest (27) species richness followed by Chebewor (19) then Londiani (14). There was a statistically significant difference in species richness among the three forest blocks (p<0.05). There were no statistically significant differences in the mean DBH (F=0.560; p=0.729) and height class distribution (F= 0.821, p=.558) among the three forest blocks. There was a statistically significant difference in stem density (F=12.22; p=0.005) and woody species diversity (F=0.32; p=0.001) within the three forests blocks. There was no statistically significant difference in the basal area distribution within the three forest blocks p>0.005. The similarity index ranged from 0.34 to 0.47. In all the forest blocks, there was evidence of seedlings and saplings indicating that there was regeneration. Results clearly show that while the Londiani Forest shows variation in characteristics, there is clear evidence that it is regenerating.

Mount Hamiding Protected Forest is located in North Halmahera Regency, North Maluku Province, the Wallace zone has an important role in providing protection functions, life support systems and regulating water management, preventing floods, preventing seawater intrusion, and controlling soil fertility. The protected forest area in the Wallace Zone is globally renowned for its endemic characteristics of flora and fauna. The condition of the protected forest of Mount Hamiding HMPF is currently experiencing anthropogenic damage as a result of forest encroachment, illegal logging, shifting cultivation, grazing and poaching to meet social needs. Anthropogenic damage has been in the spotlight for decades and has become a global issue. This study aims to determine damage to protected forests, changes in land cover, and mitigation of protected forest areas. This research uses quantitative and descriptive qualitative methods. Determination of research locations by purposive sampling. Parameters measured in this study were damage to protected forests, changes in land cover and area mitigation strategies. To identify forest damage, snowball sampling was carried out, and land cover changes through land cover data processing were obtained from the Ministry of Environment and Forestry of the Republic of Indonesia. Then using Imagery 7 ETM+ and 8 OLI to calculate changes in forested land to non-forested from 2006 -2021, analysis of land cover change using supervised classification, developing a strategy based on identity verification of forest damage and analysis of land cover change. The results showed that damage to protected forests was caused by anthropogenic disturbances in the form of forest encroachment, shifting cultivation, illegal logging, grazing and hunting of wild animals. Changes in land cover experienced the greatest damage in 2006-2021 amounting to 1,796.54 ha (16.17%). Strategic efforts are carried out using forest engineering, namely the agroforestry system and social engineering through community empowerment, namely training and outreach.

The Botryosphaeriales order are best known for the diseases they cause in woody plants, as primary pathogens or latent pathogens residing in the woody tissue of asymptomatic hosts. In the first instance, Botryosphaeriales species have been identified in Venezuela using morphological de-scriptions in the 80's and 90's, and later, the mid-2000s using molecular techniques. The mor-phological descriptions of the asexual morphs were initially used for the identification of Botry-osphaeriales genera and species. Lasiodiplodia spp., (as L. theobromae) was the most isolated fungus in Venezuela within the Botryosphaeriales and has been found in more than 50% of the hosts in native and non-native plants, followed by Diplodia, Dothiorella, Fusicoccum, Lasiodiplodia, Micro-diplodia, Macrophomina, Neofusicoccum, Sphaeropsis, and Botryosphaeria, considered all of them cosmopolitan group. With molecular studies, that included DNA sequence data from multiple genes, such as the internal transcribed spacer of rDNA (ITS), translation elongation factor-1α (tef1), and β-tubulin (btub) used on the fungi isolated from woody plants, mainly trees or forest species, resulted in the presence of two families within the Botryosphaeriales order for Venezuela. Botryosphaeriaceae family with the genera: Botryosphaeria, Cophinforma, Diplodia, Lasiodiplodia and Neofusicoccum, and the Pseudofusicoccumaceae family that includes the genus Pseudofusicoccum. In Botryosphaeriaceae family was again the Lasiodiplodia genus the most predominant in most hosts, and the specie L. theobromae the most isolated in native and non-native plants; Botryosphaeria dothidea, Cophinforma atrovirens, Diplodia scrobiculata (syn. Diplodia guayanensis), Lasiodiplodia brasi-liensis, L. crassispora, L. pseudotheobromae, Neofusicoccum arbuti (syn. N. andinum), N. parvum, and N. ribis are cosmopolitan species, and they were isolated from native and non-native plants; while Pseudofusicoccum stromaticum was found in plantations non-native of Acacia mangium, E. urophylla x E. grandis, Eucalyptus urophylla, and reported exclusively in South America; Lasiodiplodia venezue-lensis has only been reported in Venezuela, from native and non-native plants. The presence, distribution, diversity, and symptoms of these fungi, mainly of the new genus, new species, and reports found in Venezuela and other parts of the world, were also reviewed.

A primary challenge facing conservationists is reconciling the human needs of forest adjacent communities with the needs of conserving forest biodiversity, especially in tropical regions with growing populations of rural poor. Agroforestry has the potential to simultaneously provide for human needs and enhance forest biodiversity, but the complex interactions and feedbacks between the social and natural dimensions are relatively undescribed and thus systematic implementation is rare. The attributes of trees on farms required for human needs and conservation value may conflict. For example, exotic species in monoculture may provide the most economic value for farmers, while relic or planted indigenous tree mixtures may be more valuable for biological conservation. The objective of this study was to explore whether agroforestry practices in a moist tropical forest ecosystem in Kenya can simultaneously provide timber and fuelwood value to small-holder farmers while extending forest tree biodiversity. We described the agroforestry attributes on farms around a tropical forest, assessed the relationship between number and biomass of timber/fuelwood trees and tree biodiversity, and explored the relationships between forest tree diversity attributes and farm tree diversity attributes on a landscape scale using spatial analysis. We found that the diversity and number of trees on farms in this area are extensive yet variable, but that no significant relationship exists between the number of timber/fuelwood trees and tree diversity. This suggests that the two values of agroforestry may not be in conflict, due mainly to the high diversity of trees used for fuelwood. We also found that trees on farms in the larger landscape add to the conservation value of forest tree biodiversity and could be important components in conservation management. If agroforestry is to play an increasingly active role in conserving biodiversity in human-dominated landscapes, particularly in areas of dense subsistence farmer populations, increase recognition needs to be given to farmer’s perception of the value of trees and their selection of what trees to plant or maintain.

Portable Document Format (PDF) is one of the most widely used files types worldwide in data exchange, this has encourage hackers to utilize such files to spread any malicious content through PDF, utilizing different methods and techniques to accomplish that, on the other hand, security researches kept trying to improve detection methods to cope up to the rapidly increasing number of malwares daily, one of the commonly used detection technique nowadays is by utilizing artificial intelligence and Machine learning classificat; thision to help detecting PDF Malwares, in this paper, we utilize machine learning classifier Random Forest on a newly released PDF Malware dataset CIC-Evasive-PDFMal2022 to achieve the main goal of detecting malicious PDF documents, results showing a detection accuracy of around 99.5%

Antimicrobial peptides (AMPs) are considered as promising alternatives to conventional antibiotics in order to overcome the growing problems of antibiotic resistance. Computational prediction approaches receive an increasing interest to identify and design the best candidate AMPs prior to the in-vitro tests. In this study, we focused on the linear cationic peptides with non-hemolytic activity, which are downloaded from the Database of Antimicrobial Activity and Structure of Peptides (DBAASP). Referring to the MIC (Minimum inhibition concentration) values, we have assigned a positive label to a peptide if it shows antimicrobial activity; otherwise the peptide is labeled as negative. Here, we focused on the peptides showing antimicrobial activity against Gram-negative and against Gram-positive bacteria separately, and we created two datasets accordingly. Ten different physico-chemical properties of the peptides are calculated and used as features in our study. Following data exploration and data preprocessing steps, a variety of classification algorithms are used with 100-fold Monte Carlo Cross Validation to build models and to predict the antimicrobial activity of the peptides. Among the generated models, Random Forest has resulted in the best performance metrics for both Gram-negative dataset (Accuracy: 0.98, Recall: 0.99, Specificity: 0.97, Precision: 0.97, AUC: 0.99, F1: 0.98) and Gram-positive dataset (Accuracy: 0.95, Recall: 0.95, Specificity: 0.95, Precision: 0.90, AUC: 0.97, F1: 0.92) after outlier elimination is applied. This prediction approach might be useful to evaluate the antibacterial potential of a candidate peptide sequence before moving to the experimental studies.

Tree biomass and diversity relationship in mixed forest impacts on forest ecosystem services provisions. Tree biomass yield is driven by several aspects such as species identity, site condition, stand density, tree age as well as tree diversity expressed as species mingling and structural diversity. By comparing diverse degrees of tree mixture in natural forests we can insight on the ecosystem services provision level and dynamic. Two monitoring sites in the Castilian Northern Plateau (Spain) have been analyzed to disentangle the relationships between biodiversity levels and tree biomass yield. Two permanent one ha squared plots were established at Llano de San Marugan and Valdepoza. In each plot all individual trees were measured (diameter and height), georeferenced and its species identity defined. Tree species in the two sites were Pinus sylvestris, Pinus nigra, Pinus pinea, Quercus pyrenaica, Quercus ilex, Quercus faginea and Juniperus thurifera. From these datasets ten diversity indices that fall in three categories (species richness indices, species compositional/mingling indices and vertical structural indices) were used as predictor variables to fit several candidate models. By merging the trees by site (without considering the species identity) selected models include individual tree basal area as explanatory variable combining by addition or interaction with diversity indices. When species are analyzed independently structural diversity impacts on biomass yield in combination (additive or multiplicative) with tree size is negative Pinus nigra and positive for the other species.

A strategy to reduce qualitative and quantitative losses in crop-yields refers to early and accurate detection of insect-damage caused in plants. Remote sensing systems like hyperspectral proximal sensors are a promising strategy for managing crops. In this aspect, machine learning predictions associated with clustering techniques may be an interesting approach mainly because of its robustness to evaluate high dimensional data. In this paper, we model the spectral response of insect-herbivory-damage in maize plants and propose an approach based on machine learning and a clustering method to predict whether the plant is herbivore-attacked or not using leaf reflectance measurements. We differentiate insect-type damage based on the spectral response and indicate the most contributive wavelengths to perform it. For this, we used a maize experiment in semi-field conditions. The maize plants were submitted to three different treatments: control (health plants); plants submitted to Spodoptera frugiperda herbivory-damage, and; plants submitted to Dichelops melacanthus herbivory-damage. The leaf spectral response of all plants (controlled and submitted to herbivory) was measured with a FieldSpec 3.0 Spectroradiometer from 350 to 2500 nm for eight consecutive days. We evaluated the performance of different learners like random forest (RF), support vector machine (SVM), extreme gradient boost (XGB), neural networks (MLP), and measured the impact of a day-by-day analysis into the prediction. We proposed a novel framework with a ranking strategy, based on the accuracy returned by predictions, and a clusterization method based on a self-organizing map (SOM) to identify important regions in the reflectance measurement. Our results indicated that the RF-based framework algorithm is the overall best learner to deal with this type of data. After the 5th day of analysis, the accuracy of the algorithm improved substantially. It separated the three treatments into different groups with an F-measure equal to 0.967, 0.917, and 0.881, respectively. We also verified that the most contributive spectral regions are situated in the near-infrared domain. We conclude that the proposed approach with machine learning methods is adequate to monitor herbivory-damage of S. frugiperda and stink bugs like Dichelops melacanthus in maize, differentiating the types of insect-attack early on. We also demonstrate that the framework proposed for the analysis of the most contributive wavelengths is suitable to highlight spectral regions of interest.

The many strains of Cannabis spp. are associated with many effects on users and contain many different potentially psychoactive metabolites, but the links between metabolite profiles and user effects are unclear. Here we take a statistical approach to linking cause (i.e. metabolites) to effects in Cannabis spp. through the prism of strains, using quantitative data for metabolite composition and user effects. We find that species (indica vs. sativa) explains <2% of the variability in metabolite profiles, while strain explains 1/3 of variability, indicating species is nonindicative of metabolite composition, while strain is approximately indicative. Using random forests we generate a table of potential metabolite-effect links. We also find that effect-weighted metabolite composition can effectively be described in terms of four values representing the concentrations of pairs or triplets of particular compounds.

Background and Objectives: The site types of Eucalyptus urophylla × Eucalyptus grandis clonal plantations in southern Yunnan were compared, aiming to provide basis for site selection and scientific plantations management. Materials and Methods: In this study, 80 standard plots were set up in the 6−9-year-old Eucalypts plantations in Pu'er City and Lincang City. Furthermore, the quantitative theory I model and canonical correlation analysis were used to analyze the relationship between dominant tree growth traits and site factors, and evaluate the growth potential of E. urophylla × E. grandis plantation. Results: The multiple correlation coefficient between 8 site factors (altitude, slope, slope level, soil thickness, slope direction, texture, soil bulk density, and litter thickness) and the quantitative growth of the dominant wood was 0.825 (P < 0.05). According to the correlation coefficient of the quantitative regression model, slope, altitude, and soil thickness were the main factors for the classification of E. urophylla × E. grandis plantations in southern Yunnan. In addition, E. urophylla × E. grandis plantations grew best downhill and mid uphill at relatively low altitude, where the soil layer was thick and composed of weathered red soil. Contrastingly, E. urophylla × E. grandis plantation growth was extremely poor in uphill sites at higher altitude, where the soil layer was thin and composed of semi-weathered purple soil. Furthermore, total N, and available B, Cu, and Zn content, as well as soil organic matter content in the soil had a great influence on the growth of E. urophylla × E. grandis. Conclusions: Nitrogen and phosphate fertilizer as well as trace elements such as B, Zn, and Cu can be properly applied in middle- and low-yield forests to promote the growth and development of E. urophylla × E. grandis plantations.

Soil proteases are involved in the transformation of organic matter and thus influence the nutrient turnover in the ecosystem. Phytohormones, similarly to proteases, are synthesized and secreted into the soil by fungi and microorganisms and regulating their activity in the rhizosphere. The aim of our work was to find out how the presence of auxins, cytokinins, ethephone and chlorocholine chloride affects the activity of native soil proteases at the spruce tree stand. Auxins stimulated the native proteolytic activity in the spruce tree stand. Synthetic auxins most stimulated the activity of 2-naphthoxyacetic acid and the naturally occurring auxins of indole-3-acetic acid in the organic horizon of the spruce forest. Cytokinins, ethephone and chlorocholine chloride inhibited the activity of native soil proteases in the spruce tree stand. The highest inhibitory effect was found in ethephone and chlorocholine chloride. Overall, the negative effect of phytohormones on the activity of the native proteolytic activity may slow down the decomposition of organic matter and thus make plant nutrition more difficult. The outcomes of our work assist with understanding of the effect of substances produced by the rhizosphere on the activity of soil microorganisms and the soil nitrogen cycle.

Mapping settlement extents at the annual time step has a wide variety of applications in demography, public health, sustainable development, and many other fields. Recently, while more multitemporal urban feature or human settlement datasets have become available, issues still exist in remotely-sensed imagery due to coverage, adverse atmospheric conditions, and expenses involved in producing such feature sets. These challenges make it difficult to increase temporal coverage while maintaining high fidelity in the spatial resolution. Here we demonstrate an interpolative and flexible modeling framework for producing annual built-settlement extents. We use a combined technique of random forest and spatio-temporal dasymetric modeling with open source subnational data to produce annual 100m x 100m resolution binary settlement maps in four test countries of varying environmental and developmental contexts for test periods of five-year gaps. We find that in the majority of years, across all study areas, the model correctly identified between 85-99% of pixels that transition to built-settlement. Additionally, with few exceptions, the model substantially out performed a model that gave every pixel equal chance of transitioning to the category “built” in each year. This modelling framework shows strong promise for filling gaps in cross-sectional urban feature datasets derived from remotely-sensed imagery, provide a base upon which to create future built/settlement extent projections, and further explore the relationships between built area and population dynamics.

The effects of heterogeneity of cooperative membership on cooperative and collective action sustainability has been previously discussed. However, despite the importance of membership heterogeneity in recent theoretical frameworks, empirical examinations have been limited. We determine the effect of changes to cooperative member heterogeneity on cooperative sustainability and discuss changes to heterogeneity overtime that can advance our understanding to cooperative sustainability long-term. This study uses USDA Agricultural Management Resource Survey data, coupled with USDA-Rural Development cooperative financial data at the state level, to quantify effects of cooperative member heterogeneity to sustainability of U.S. farmer cooperatives. We use random forest regression to interpret the significance of heterogeneity with cooperative sustainability at an aggregate level. The findings of this empirical study narrowly reconciles the theoretical understanding of the emergence of intra-cooperative issues while providing consistent empirical evidence and expectations for the sustainability of cooperatives in the near term.

Rapid urbanization has changed the structure and function of natural ecosystems, especially the floodplain ecosystems in SE Asia. This paper describes the ecological structure of vegetation stands and the usefulness of satellite images to characterize a disturbed tropical urban forest located in the lower floodplain of the Chao Phraya River, Thailand. Nine representative plots were established in Bang Kachao peninsula in 4 tropical urban forest types: rehabilitation forest, home-garden agroforestry, mangrove and park. The correlation between NDVI and LAI obtained from satellite images and plant structure from field surveys were analyzed. The NDVI had the highest relationship with stand factors for the number of families, number of species, Shannon-Weiner’s diversity index and total basal area. The LAI had the highest correlation with total basal area, number of canopy layers, stand density and canopy density. Linear regression predicted the correlation between NDVI and LAI with stand factors as show above. The trend in NDVI and LAI reflected the urban forest type, being high in rehabilitation and mangrove forests, moderate in home-gardens and low in parks. Future urban planning of the Bang Kachao peninsula should focus on rehabilitation to increase the biodiversity and complexity of the urban forest.

Wildfires have always been a part of the history of Mediterranean forests. However, forest regeneration after a wildfire is not certain. It depends on many factors, some of which may be influenced by land management activities. Failure of regeneration will cause a regime shift in the ecosystem, reducing the provision of ecosystem services and ultimately leading to desertification. How can we increase Mediterranean forests’ resilience to fire? To answer this question, we did a literature review, investigating chains of processes that allow forests to regenerate (which we label “regeneration mechanisms”), and assessed the impact of selected management practices documented in the WOCAT database on the regeneration mechanisms. We identified three distinct regeneration mechanisms that enable Mediterranean forests to recover, as well as the time frame before and after a fire in which they are at work, and factors that can hinder or support resilience. The three regeneration mechanisms enabling a forest to regenerate after a fire consist of regeneration (1) from a seed bank; (2) from resprouting individuals; and (3) from unburned plants that escaped the fire. Management practices were grouped into four categories: (1) fuel breaks, (2) fuel management, (3) afforestation, and (4) mulching. We assessed how and under what conditions land management modifies the ecosystem’s resilience. The results show that land management influences resilience by interacting with resilience mechanisms before and after the fire, and not just by modifying the fire regime. Our analysis demonstrates a need for adaptive – i.e. context- and time-specific – management strategies.

Historical forest management practices in the southwestern US have left forests prone to high intensity, stand-replacement fires. Effective management to reduce the cost and impact of forest-fire management and allow fires to burn freely without negative impact depends on detailed knowledge of stand composition, in particular, above-ground biomass (AGB). Lidar-based modeling techniques provide opportunities to reduce costs and increase ability of managers to monitor AGB and other forest metrics. Using Bayesian Model Averaging (BMA), we develop a regionally applicable lidar-based statistical model for Ponderosa pine and mixed conifer forest systems of the southwestern USA, using previously collected field data. The selected regional model includes a mid and low canopy height metric, a canopy cover, and height distribution term. It explains 72% of the variability in field estimates of AGB, and the RMSE of the two independent validation data sets are 23.25 and 32.82 Mg/ha. The regional model developed is structured in accordance with previously described models fit to local data, and performs equivalently to models designed for smaller scale application. Developing regional models for broad scale application provides a cost-effective, robust approach for managers to monitor and plan adaptively at the landscape scale.

Tularemia is a zoonotic disease caused by {\it Francisella tularensis} bacteria, a gram-negative coccobacillus-shaped bacterium. There are multiple transmission routes of the infection to humans such as consumption of contaminated food or water, handling of infected animals or bites from {\it haematophagous} arthropods (such as ticks, deer flies, or mosquitoes). In this study we focus on transmission via the bites of ticks and developed a deterministic model of ordinary and impulsive differential equations to gain insight in the differential effect of prescribed fire on {\it Demacenta variablis} and {\it Amblyomma americanum} ticks and the prevalence of tularemina. We found that prescribed fire differentially reduce the number of the two ticks with {\it A. americanum} reduced the least compare to {\it D. variablis} subsequently leading to differential increase of tularemia new infected cases in humans and rodents. Our result further indicates that the spatial arrangement of burn against unburn areas may not matter as either arrangement led to fewer ticks and reduction in tularemia transmission when prescribed fire was implemented. The results of this study provide important new understandings of the intricate effect of prescribed fire on tick species, and the dynamics of the tick-borne disease, tularemia disease in this study.