Container crane has been widely used for port operation. However, the structure of port container crane is large, which always lead to crane damage under the vibration and strong wind. Therefore, a method for vibration reduction of container crane structure based on particle damping technology is proposed. In this investigation, the scale 1:80 crane model is built, the equivalent mechanical model is also established to preliminary verify the effect of vibration suppression. Furthermore, the dependence of vibration suppression effect on the key parameters of the damper, i.e., filling material, filling rate, particle size, and installation position of dampers are analyzed through experiments. The results indicate that the vibration peak of the crane structure displayed in Simulink oscilloscope is weakened and lags behind, the installation of the damper brings the effect of vibration suppression for the crane, the vibration suppression effect reaches 25%; the crane mode obtains the best vibration suppression effect under the condition that the material filled in the damper has a large density and elastic modulus, sufficient collision space and high collision frequency, and the dampers are installed far away from the crane center of gravity. The optimum parameters of the damper obtained from experiments, 12 mm lead beads, filling rate of 60%, installed in the distal ends within the strength range of the forearm of the crane. It is thus concluded that the particle damping technology has provided an effective way in wind and vibration reduction for container crane.

The base excitation of mechanical equipment can result in pipeline system vibration which seriously affects the safe operation of the equipment. Particle damping technology is based on the particle collision dissipation principle to realize the structural vibration energy dissipation. This paper introduces the particle damping method into the vibration control of pipeline system. A particle damper has been designed for the structural characteristics of the pipeline. The influence of the material and structure of the pipeline particle damper, the external excitation and other parameters on the energy dissipation characteristics of particle damping are revealed. The energy dissipation mechanism of the pipeline particle collision damper under various parameter is analyzed. A pipeline vibration reduction test system with particle damping has been established. The effects of different excitation conditions, damper materials and number of unit structures of particle damper on the vibration damping effect of pipeline systems are investigated comparatively. The influence of damper parameters on the vibration suppression of pipeline system is obtained. The research in this paper can provide technical references for vibration suppression of pipeline systems.

The interest on amorphous carbon thin films with low secondary electron yield (SEY) has been increasing in the last years, to mitigate electron multipacting in particle accelerators and in RF devices. Previous works found that the SEY increases with the hydrogen amount and correlates with the Tauc gap. In this work, we analyse films produced by magnetron sputtering with different contents of hydrogen and deuterium, incorporated via target poisoning and sputtering of CxDy molecules. XPS was implemented to estimate the phase composition of the films. The maximal SEY was found to decrease linearly with the fraction of the graphitic phase in the films. These results are supported by Raman scattering and UPS. The graphitic phase decreases almost linearly for hydrogen and deuterium concentrations between 12% and 46% (at.), but abruptly decreases when the concentration reaches 53%. This vanishing of the graphitic phase is accompanied by a strong increase of SEY and of the Tauc gap. These results suggest that the SEY is not dictated directly by the concentration of H/D but by the fraction of graphitic phase. The results are supported by a model used to calculate SEY of films consisting of a mixture of graphitic and polymeric phases.

The process of shock wave focusing can make the strength of shock waves be continuously accumulated and turned into detonation wave in Pulse Detonation Engine (PDE). However, its effective application needs the inlet jets be in high temperature and velocity, which is difficult to be satisfied under certain conditions. Therefore, in this paper, metal magnesium assisted detonation initiation is proposed and the effect of magnesium particle addition on the shock wave focusing process in a kerosene-fueled PDE with cavity configuration is investigated through numerical simulation. The result showed that when the temperature of the premixed fuel/air jets injected in opposite direction was set as 650 K, the collision of leading shock waves on the central axis was the main source of energy deposition and the shock wave focusing could make the detonation be initiated in the cavity. When the temperature of jets is reduced to 550 K, fuel ignition and detonation could not be achieved through shock wave focusing. Then adding metal magnesium particles into the combustor made the energy deposition be enhanced and the detonation be induced. The diffusion of metal particles can significantly change the structure, motion, merging and dissipation of vortices in the flow field. Generally, the shock wave focusing process is basically not affected with metal particles injection. Therefore, this method can be successfully employed for detonation initiation in the cavity when the fuel/air premixed jet temperature is not high for PDE.

These years have witnessed growing research on applying rheology in grinding and flotation treatment of finely disseminated ores. The slurry rheology has long been identified as the comprehensive effect of inter-particle interactions, including their aggregation (coagulation and flocculation) and dispersion states in slurry, which are more impactive under the fine-particle effect. In this regard, rheology has the potential to play a significant role in interpreting the flowing and deforming phenomenon of inter-particle aggregates, particle-bubble aggregates, and flotation froth. Though much attention has been paid to the rheological effect in industrial suspension, this has not been the case for mineral grinding and flotation for fine particles. The influential mechanism of rheology on the sub-processes of mineral processing has not been systemically concluded and revealed thoroughly, without which the underpinning mechanism for enhancing the processing efficiency has been difficult to discover. This paper reviews the current application and importance of rheology in the fine mineral processing, and the potential research direction in the field is proposed.

We introduce two symmetric concepts to physics: “distance” (space and time in one) and “wavematter” (electromagnetic wave packet and matter in one). We claim that physics has chosen the wrong concept of time: It is not aware that the time of a moving object flows in a direction other than my time. We provide 15 proofs for our claim by solving 15 mysteries of physics graphically! For example, we prove that length contraction and time dilation are actually geometrical effects in a 4D manifold that we call “Euclidean spacetime” (ES). We prove that the discrepancy in calculating the Hubble constant stems from a systematic error in the redshift measurement. We prove that what I deem wave, deems itself matter, which solves wave–particle duality. We even untangle quantum entanglement without the issue of non-locality. We finally understand why alternative theories of Euclidean relativity have failed: They are all based on four dimensions of space rather than distance. A huge amount of energy was injected into ES at a point that we take as origin. Ever since has this energy been moving radially away at the speed of light. We live in the 3D hypersurface of an expanding 4D hypersphere. Hyperspherical coordinates have the great advantage that they reduce all that is ever happening to just one formula. So, it is the Theory of Everything in these coordinates: “Energy is covering radial distance which, divided by Euclidean time, is equal to the speed of light.” Acceleration and force like gravitation emerge from a rotation of objects in ES and a subsequent projection to 3D space. Matching the symmetry simplifies physics.

Dirac’s equation depicts electron mass as either positive or negative. Taken as correct description of nature, the equation identifies electron mass as ‘electrically active’ and therefore fundamentally different from the ordinary, ‘electrically passive’ mass. Following this cue, I demonstrate that electron mass (m_e) is the natural elementary mass: positive (m_e⁺) and negative (m_e^–) elementary masses neutralise to an elementary unit of the electrically passive mass (2m_e⁰). Further, I show that electron mass (m_e^± ) and the electrostatic field (e_f^±) surrounding it compose an elementary charge (e^±), thereby relating charge to mass. Two plain principles underlie these findings. 1) Electric charge and gravitational mass have a common root: positive (e⁺) and negative (e^–) charges coexist as neutral charge (2e⁰), which is the quantum of gravitational mass. 2) Charge is a static (nonrelativistic) ‘atom of electricity’ and obeys the laws of electrostatics; electron is the same ‘atom of electricity’ at ultrahigh (relativistic) speed and obeys the laws of electrodynamics. That is, charges are electricity at rest; electrons are electricity in motion – ‘same physical entities two behavioural identities.’ A decisive proof that this paradigm shift correctly portrays is that it verifiably unifies Newton’s law of gravity and Coulomb’s law of electrostatics to: 8G/m_pm_e = K/e²; where G and K are the respective constants, m_p the proton mass, m_e the electron mass, and e the elementary charge. Ultimately, the insights simplify matter to pure ‘atoms’ of positive and negative electricity.

Global optimization is an imperative development of local optimization because there are many problems in artificial intelligence and machine learning requires highly acute solutions over entire domain. There are many methods to resolve the global optimization, which can be classified into three groups such as analytic methods (purely mathematical methods), probabilistic methods, and heuristic methods. Especially, heuristic methods like particle swarm optimization and ant bee colony attract researchers because their effective and practical techniques which are easy to be implemented by computer programming languages. However, these heuristic methods are lacking in theoretical mathematical fundamental. Fortunately, minima distribution establishes a strict mathematical relationship between optimized target function and its global minima. In this research, I try to study minima distribution and apply it into explaining convergence and convergence speed of optimization algorithms. Especially, weak conditions of convergence and monotonicity within minima distribution are drawn so as to be appropriate to practical optimization methods.

An analysis is presented of the possible existence of a second anomalous dipole moment of Dirac’s particle next to the one associated with the angular momentum. It includes a discussion why, in spite of his own derivation, Dirac has doubted about its relevancy. It is shown why since then it has been overlooked and why it has vanished from leading textbooks. A critical survey is given on the reasons of its reject, including the failure of attempts to measure and the perceived violations of time reversal symmetry and charge-parity symmetry. It is emphasized that the anomalous electric dipole moment of the pointlike electron (AEDM) is fundamentally different from the quantum field type electric dipole moment of an electron (eEDM) as defined in the standard model of particle physics. The analysis has resulted into the identification of a third type Dirac particle, next to the electron type and the Majorana particle. It is shown that, unlike as in the case of the electron type, its second anomalous dipole moment is real valued and is therefore subject to polarization in a vector field. Examples are given that it may have a possible impact in the nuclear domain and in the gravitational domain.

As currently understood, the Dirac theory employs a 4 x1 type wavefunction. This 4x1 Dirac wavefunction is acted upon by a 4x4 Dirac Hamiltonian operator, in which process, four independent particle solutions result. Insofar as the real physical meaning and distinction of these four solutions, it is not clear what these solutions really mean. We demonstrate herein that these four independent particle solutions can be brought together under a single roof wherein the Dirac wavefunction takes a new form as a 4x4 wavefunction. In this new formation of the Dirac wavefunction, these four particle solutions precipitate into three distinct and mutuality dependent particles that are eternally bound in the same region of space. Given that Quarks are readily found in a mysterious threesome cohabitation-state eternally bound inside the Proton and Neutron, we make the suggestion that these Dirac particles might be Quarks. For the avoidance of speculation, we do not herein explore this idea further but merely present it as a very interesting idea worthy of further investigation. We however must say that, in the meantime, we are looking further into this very interesting idea, with the hope of making inroads in the immediate future.

The Eastern Mediterranean is a highly populated area with air quality problems as well where climate change already is noticed by higher temperatures and changing precipitation pattern. The anthropogenic aerosol affects health and changing concentra-tions and properties of the atmospheric aerosol affect radiation balance and clouds. Continuous long-term observations are essential in assessing the influence of anthro-pogenic aerosols on climate and health. We present 6 years of observations from Navarino Environmental Observatory (NEO), a new station located at the south west tip of Pelo-ponnese, Greece. The two sites at NEO, were evaluated to show the influence of the local meteorology but also to assess the general background aerosol possible. It was found that the background aerosol was originated from aged European aerosols and was strongly influenced by biomass burning, fossil fuel combustion, and industry. When subsiding into the boundary layer, local sources contributed in the air masses moving south. Mesoscale meteorology determined the diurnal variation of aerosol properties such as mass and number by means of typical sea breeze circulation, giving rise to pronounced morning and evening peaks in pollutant levels. While synoptic scale meteorology, mainly large-scale air mass transport and precipitation, strongly influenced the season-ality of the aerosol properties.

Particle swarm optimization (PSO) is an effective algorithm to solve the optimization problem in case that derivative of target function is inexistent or difficult to be determined. Because PSO has many parameters and variants, I propose a general framework of PSO called GPSO which aggregates important parameters and generalizes important variants so that researchers can customize PSO easily. Moreover, two main properties of PSO are exploration and exploitation. The exploration property aims to avoid premature converging so as to reach global optimal solution whereas the exploitation property aims to motivate PSO to converge as fast as possible. These two aspects are equally important. Therefore, GPSO also aims to balance the exploration and the exploitation. It is expected that GPSO supports users to tune parameters for not only solving premature problem but also fast convergence.

Several particles are not observed directly, but only through their decay products. We consider the possibility that they might be fakeons, i.e. fake particles, which mediate interactions but are not asymptotic states. A crucial role to determine the true nature of a particle is played by the imaginary parts of the one-loop radiative corrections, which are affected in nontrivial ways by the presence of fakeons in the loop. The knowledge we have today is sufficient to prove that most non directly observed particles are true physical particles. However, in the case of the Higgs boson the possibility that it might be a fakeon remains open. The issue can be resolved by means of precision measurements in existing and future accelerators.

Plant pathogens utilize effectors to subvert host cell biology for facilitating infection. However certain effectors, called as the avirulence proteins, trigger immune responses in the host. AvrPi54 is an avirulence protein from fungus Magnaporthe oryzae which induces the defense reactions in rice cells that contain Pi54 resistance gene. The characterization of such proteins and elucidation of their function facilitate the understanding of the mechanism of disease establishment. In present study, physiochemical properties of AvrPi54 were analysed using computational methods. We found that mature AvrPi54 is a small, hydrophobic and secretary protein with 134 amino acids. It is rich in small amino acids with no significant homology with other proteins in databases. The gene ORF was cloned in pET28a(+) vector and expressed in E. coli BL21(DE3)pLysS. The protein was purified using affinity chromatography. Transient expression of the gene in epidermal cells of onion bulb is a powerful tool to predict the subcellular localization in plant cells. We fused AvrPi54 to eYFP and transformed epidermal cell layer of onion bulb. Fused protein localized to the plasma membrane and nucleus of plant cells. Therefore, AvrPi54 might be functioning in the host cell as transcription factor or chromatin remodelling factor to modify pathogenesis-related processes.

In this article various heuristic approaches are discussed to solve the dark matter phenomenon by the concept of vacuum polarization. They are compared with a more fundamental approach, based upon an entropy model of the visible universe. They all make use of some kind of gravitational dipole. These dipoles seem to violate Einstein’s equivalence principle between inertial mass and gravitational mass. It is shown how the paradox can be solved by a quantum mechanical principle.

Inertial microfluidics offers high throughput, label-free, easy to design, and cost-effective solutions and is a promising technique based on hydrodynamic forces (passive techniques) instead of external ones, which can be employed in lab-on-a-chip and micro-total-analysis-systems for focusing, manipulation, and separation of microparticles in chemical and biomedical applications. The current work, studies the focusing behavior of microparticles in an asymmetric curvilinear microchannel. For this purpose, focusing behavior, including position and band width, of microparticles of diameters of 10, 15 and 20 µm, which served as representatives of different cells, in an asymmetric curvilinear microchannel with curvature angle of 280° was experimentally studied at flow rates from 400 to 2700 µL/min (corresponding to Reynolds numbers between 30 and 205). The results revealed that the largest distance between focusing bands of 20 µm and 10 µm microparticles as well as between focusing bands of 15 µm and 10 µm was obtained at Reynolds number of 121. For the case of microparticles of diameters 20 µm and 15 µm, the largest distance was seen at Reynolds number of 144. The focusing band width became smaller in the asymmetric microchannel so that focusing could be more clearly observed in this configuration.

Silver nanoparticles (AgNPs) have been demonstrated to restrain bacterial growth while maintaining the minimal risk in development of bacterial resistance and human cell toxicity that conventional silver compounds exhibit. Several physical and chemical methods have been reported to synthesize AgNPs. However, these methods are expensive and involve heavy chemical reduction agents. An alternative approach to produce AgNPs in a cost-effective and environmentally friendly way employs a biological pathway using various plant extracts to reduce metal ions. The size control issue and the stability of nanoparticles remain some of the latest challenges in such methods. In this study, we used two different concentrations of fresh leaf extract of the plant Arbutus Unedo (LEA) as a reducing and stabilizing agent to produce two size variations of AgNPs. UV-Vis spectroscopy, Dynamic Light Scattering, Transmission Electron Microscopy and zeta potential were applied for the characterization of AgNPs. Both AgNP variations were evaluated for their antibacterial efficacy against the gram-negative species Escherichia coli and Pseudomonas aeruginosa, as well as the gram-positive species Bacillus subtilis and Staphylococcus epidermidis. Although significant differences have been achieved in the nanoparticles’ size by varying the plant extract concentration during synthesis, the antibacterial effect was almost similar.

We have successfully developed curcumin nanosuspension aimed for oral delivery. The main purpose is to improve bioavailability through enhancing its solubility. The nanoparticles were stabilized using various stabilizers including polyvinyl pyrrolidone (PVP), polyvinyl alcohol (PVA), sodium carboxymethylcellulose (Na-CMC), d-alpha tocopheryl polyethylene glycol 1000 succinate (TPGS), and sodium dodecyl sulfate (SDS). The average diameter of particles, microscopic appearance, and sedimentation of each preparation was observed and compared. Each stabilizer demonstrated different degree of inhibition of particle aggregation under electrolyte-containing simulated gastrointestinal (GIT) fluid. Non-ionic stabilizers (PVA, PVP, and TPGS) has shown to preserve the nanosuspension stability against electrolytes. In contrast, strong ionic surfactants such as SDS were found to be very sensitive to electrolytes. The results can provide useful information for the formulators to choose the most suitable stabilizers by considering the nature of stabilizers and physiological characteristics of target site of the drug.

Efficient resource allocation is crucial in clusters with frugal Single-Board Computers (SBCs) possessing limited computational resources. These clusters are increasingly being deployed in edge computing environments in resource-constrained settings where energy efficiency and cost-effectiveness are paramount. A major challenge in Hadoop YARN scheduling is load-balancing, as frugal nodes within the cluster can become overwhelmed, resulting in degraded performance and frequent occurrences of out-of-memory errors, ultimately leading to job failures. In this study, we introduce an Adaptive Multi-criteria Selection for Efficient Resource Allocation (AMS-ERA) in Frugal Heterogeneous Hadoop Clusters. Our criterion considers CPU, memory and disk requirements for jobs and aligns the requirements with available resources in the cluster for optimal resource allocation. To validate our approach, we deploy a heterogeneous SBC-based cluster consisting of 11 SBC nodes and conduct several experiments to evaluate the performance using Hadoop wordcount and terasort benchmark for various workload settings. The results are compared to the Hadoop-Fair, FOG and IDaPS scheduling strategies. Our results demonstrate a significant improvement in performance with the proposed AMS-ERA, reducing execution time by 27.2%, 17.4% and 7.6% respectively using terasort and wordcount benchmarks.

The article proposes a mathematical model for creating playlists based on the emotional utility of the consumer, aiming to maintain high user interest in music streaming platforms (Lugos Abarca, 2024). The proposed method follows these steps: first, it calculates the MEEPE of Songs on the digital platform; subsequently, it quantitatively defines the Consumer's MEEPI before exposure to music; then, it operates the MEEPE of the Songs with the consumer's initial MEEPI using the known resolution process (Lugos Abarca, 2023); finally, it employs an emotional utility function to determine possible levels of emotional satisfaction and establish the playback order. This results in the creation of an efficient theoretical model. It is recommended to expand the computational study of the model in future research by using a broader set of songs and considering various initial MEEPI of the consumer. The article's originality lies in its ability to predict, quantitatively and theoretically, the level of satisfaction a music consumer could experience when listening to a playlist.

The objective of this research is to propose a utility function that calculates the possible level of satisfaction that a music consumer would achieve after listening to a song according to the emotional response obtained from a song. Assuming that the consumer's musical preferences are satisfied if the predominant emotions of his current emotional state increase; the probabilistic emotional-musical model (Lugos Abarca, 2023) is used to construct such a utility function. By posing a hypothetical scenario, realistic results were obtained, which guarantee, in principle, its use in theoretical practice. The originality of this research lies in proposing a mathematical tool to study, quantitatively, the decision making of a musical consumer influenced by his emotions. The main conclusion being its importance in the music industry, since the function could predict, theoretically, whether a song will be accepted or rejected by the consumer in comparison with the competition.

During the last few years, advancement in the area of biochemistry, science of the material world, engineering and computer-aided testing has directed towards advancement of high-throughput tools for the sake of profiling information encoded in a gene. Single-cell RNA-sequencing (scRNA-seq) tools capable to examine the sequence data from each individual cells and it shows within population variety and permit exploring of cell conditions and transformation by extreme resolution, possibly give out cell sub-types or gene expression fluctuations that are shaded in mass sequencing processes, which shows population-averaged evaluations. Yet, the major disadvantage for this tool is the lack of success to pick out location related details of the RNA transcriptome, as this needs tissue detachment and cell isolation. Location based transcript determination is among the advancements in the area of medical biotechnology as this can find out the molecules like RNA dataset in their intact physical placement in tissue segment with spatial context at the scale of a single-cell, which is very advantageous as compare to single-cell sequencing techniques. These approaches give key observation in the areas of biomedical field sub-disciplines like neurology, embryology, carcinoma study, immune cell investigation and histological activities. Generally, this review mainly focused towards single-cell sequencing methods, technology development, its challenges observed, different expression data analysis mechanisms and their applications in different areas, such as in cancer research, microbes, central nervous system, sex organs and immune-biology, intensifying the essentiality of sequencing tools at single-cell level for the characterization of extremely dynamic individual cells.

A microfinance scheme has emerged as a crucial tool in reducing poverty gaps in many developing countries. A notable player in the arena is Amanah Ikhtiar Malaysia (AIM), a pioneer in microfinancing in Malaysia since 1987. AIM’s microfinance program injects small-scale businesses, particularly benefiting single mother entrepreneurs, contributing to capacity-building and empowerment. However, the advent of the COVID-19 pandemic, coupled with Movement Control Order (MCO), has adversely affected various business sectors and vulnerable groups, including single mothers engaged in microfinancing enterprises. This study employs primary data to assess the impact of AIM’s microfinancing programs on single-mother entrepreneurs during the crisis. Utilizing a quantitative approach with a two-stage sampling process involving 422 respondents in urban areas, the research evaluates the relationship between empowerment indicators (economic, social, digital, and psychological) and management and governance aspects of program effectiveness. The findings reveal that the microfinancing program’s overall effectiveness, economic, digital and psychological empowerment indicators, and program management are at a moderate level, while social empowerment is high. Economic and digital empowerment, along with effective management, positively and significantly influence program effectiveness, whereas social empowerment has a negative and significant impact. The study concludes with recommendations for enhancing AIM’s microfinance program, equipping single mother entrepreneurs to better navigate future challenges, and informing policy formulation related to their empowerment.

Electrocatalytic and photocatalytic hydrogen evolution reaction (HER) provides a promising approach to clean energy generation. Bimetallic single-atom catalysts raised and have been explored to be advanced catalysts for HER. It is urgent to review and summarize the recent advances in developing bimetallic single-atom HER catalysts. Firstly, the fundamentals of bimetallic single-atom catalysts are presented, highlighting their unique configuration of two isolated metal atoms on supports and resultant synergistic effects. Secondly, recent advances in bimetallic single-atom catalysts for electrocatalytic HER under acidic/alkaline conditions are then reviewed, including W-Mo, Ru-Bi, Ni-Fe, Co-Ag, and other dual-atom systems on graphene and transition metal dichalcogenides (TMDs) with enhanced HER activity versus monometallic analogs due to geometric and electronic synergies. Then, Photocatalytic bimetallic single-atom catalysts on semiconducting carbon nitrides for solar H2 production are also discussed. Finally, an outlook is provided on opportunities and challenges in precisely controlling bimetallic single-atom catalyst synthesis and gaining in-depth mechanistic insights into bimetallic interactions.

Purpose: Therapeutic targeting of RAF1 is promising, but it requires further investigation for the relation between clinical features and RAF1 aberrations regarding the MAPK signaling pathway in various solid tumors to realize the precision medicine. Methods: Between October 2019 and June 2023, Samsung Medical Center, 3,895 patients with metastatic cancer patients received a next-generation sequencing (NGS) using TruSight Oncology 500 (TSO500) assay as a routine clinical practice. We surveyed the incidence of RAF1 aberration including mutation (single-nucleotide variant [SNV]), amplification (copy-number variation), and fusion. Results: In 3,895 metastatic cancer patients, 77 (2.0%) had RAF1 aberrations in their tumor specimen. Of 77 patients, 44 (1.1%) had RAF1 mutations (SNV), 25 (0.6%) had RAF1 amplification and 10 (0.3%) had RAF1 fusions. Among 10 patients with RAF1 fusion, concurrent RAF1 amplification and RAF1 mutation were detected in one patient each. The most common tumor types were bladder cancer (11.5%), followed by ampulla of Vater (AoV) cancer (5.3%), melanoma (3.0%), gallbladder (GB) cancer (2.6%), and gastric cancer (2.3%). Microsatellite instability high (MSI-H) tumors were found in 5 out of 76 patients (6.6%) with RAF1 aberration, while MSI-H tumors were found only in 2.1% of patients with wild-type RAF1 cancer (p < 0.0001). Conclusion: We showed that when patients with metastatic solid cancer receive NGS test, approximately 2.0% have RAF1 aberrations in their tumor specimen.

Object detection is a popular image processing technique, widely used in numerous applications for detecting and locating objects in images or videos. While being one of the fastest algorithms for object detection, Single-Shot Multibox Detection (SSD) networks are also computationally very demanding, which limits their usage in real-time edge applications. Even though the SSD post-processing algorithm is not the most complex segment of the overall SSD object detection network, it is still computationally demanding and can become a bottleneck with respect to processing latency and power consumption, especially in edge applications with limited resources. When using hardware accelerators to accelerate backbone CNN processing, the SSD post-processing step implemented in software can become critical for high-end applications where high frame rates are required, as this paper shows. To overcome this problem, we propose Puppis, an architecture for hardware acceleration of SSD post-processing algorithm. As experiments will show, our solution will lead to an average SSD post-processing speedup of 34.42 when compared with a software implementation. Furthermore, execution of a complete SSD network will be on average 45.39 times faster than software implementation when the proposed Puppis SSD hardware accelerator is used together with some existing CNN accelerators.

To avoid the endless accumulation of QTL effects during pyramiding breeding, QTL epistasis plays a role of homeostasis. Four single-segment substitution lines with heading date QTLs were utilized to construct pyramiding materials with dual QTLs and triple QTLs, allowing for the estimation of QTL epistatic effects on heading date in rice. The epistatic components of dual QTL and triple QTL interactions were analyzed using data from three seasons of two years. All four QTLs can be considered as dominant loci, demonstrating superdominance. 75% of dual QTL interactions and 81.25% of triple QTL interactions obtained statistically significant results, reaffirming the prevalence of epistasis. Interactions of four QTLs with three positive effects and one negative effect generated 62.5% negative dual QTL epistatic effects and 57.7% positive triple QTL epistatic effects, forming the balance relationship “positive-negative-positive”. In fact, QTL effects were consistently partially neutralized by mixed QTL epistatic effects so as to control the infinite accumulation of QTL effects. QTL epistasis plays a role of homeostasis on heading date in rice. However, there were two exceptions. The directions of OsMADS50 and Hd3a-2 effects were consistently aligned with those of their mixed epistases, suggesting that the QTL or gene could be employed in pyramiding breeding with different objectives. This study elucidated the mechanism of epistatic interactions among four QTLs and provided valuable genetic resources for improving heading date in rice.

Understanding the catalytic performance of different materials is of crucial importance for further technological advancements. This especially relates to the behavior of different classes of catalysts under operating conditions. Here we analyze the effects of local coordination of metal centers (Mn, Fe, Co) in graphene-embedded Single-Atom Catalysts (SACs). We have started from well-known M@N4-graphene catalysts and systematically replaced nitrogen atoms with oxygen or sulfur atom to obtain M@OxNy-graphene and M@SxNy-graphene SACs (x+y=4). We show that local coordination strongly affects the electronic structure and the reactivity towards hydrogen and oxygen species. However, the stability is even more affected. Using the concept of Pourbaix plots, we show that the replacement of nitrogen atoms coordinating metal center with O or S destabilizes SACs towards the dissolution, while the metal centers get easily covered by O and OH acting as additional ligands at high anodic potentials and high pH values. Thus, not only should local coordination be considered in terms of the activity of SACs, but it is also necessary to consider its effects on the speciation of SACs' active centers under different potential and pH conditions.

There has been considerable research on reconstructing 3D shapes from single-view images; however, preserving the detailed information of the input image remains difficult. In this paper, we propose the application of a gradient map to train a network, aimed at improving the visual quality of fine-grained details such as the thin and tiny components of generated shapes. Each gradient map was created from the original voxel data, and each value represented the amount of information per volume. Here, the gradient map was defined by several methods that mathematically quantify and represent the detailed structure of an object. By applying this map to the loss function in training, we could induce the network to intensively train partial details, such as thin and narrow parts. We demonstrated that the detailed information was well-recovered when a weight that is proportional to the gradient value was applied to the loss. Furthermore, it is expected that our method will contribute to the development of 3D technologies related to the construction of virtual space for simulation and new customer experience.

The quest for accurate and more efficient methods for solving periodic/oscillatory problems is gaining more attention in recent time. This paper presents the construction and implementation of a family of exponentially–fitted Obrechkoff methods. A single–step Obrechkoff method involving terms up to the fourth derivatives was used as the base method. We also present the stability and convergence properties of the constructed family of methods. Two numerical examples were use to illustrate the performance of the constructed methods.

Boosted by the progress in deep learning, Single Image Super-Resolution (SISR) has gained a lot of interest in the Remote Sensing community, who sees it as an oportunity to compensate for satellite's ever-limited spatial resolution with respect to end users needs. While there has been a great amount of work on network architures in the latest years, deep learning based SISR in remote sensing is still limited by the availability of the large training sets it requires. The lack of publicly available large datasets with the required variability in terms of landscapes and seasons pushes researchers to simulate their own dataset by means of downsampling. This may impair the applicability of the trained model on real world data at the target input resolution. In this paper, we propose an open-data licenced dataset composed of 10m and 20m cloud-free surface reflectance patches from Sentinel-2, with their reference spatially-registered surface reflectance patches at 5 meter resolution acquired on the same day by the VENµS satellite. This dataset covers 29 locations on earth with a total of 132 955 patches of 256x256 pixels at 5 meters resolution, and can be used for the training of super-resolution algorithms to bring the spatial resolution of 8 of the Sentinel-2 bands down to 5 meters.

A Weyl semimetal is a novel crystal with low-energy electronic excitations that behave as Weyl fermions. It has received worldwide interest and was believed to have opened the next era of condensed matter physics after graphene and three-dimensional topological insulators. Howev-er, it is not easy to obtain a single large-size crystal because there are many nucleations in the preparation process. Here, a bottom-seed CVT growth method is proposed in this paper, and we acquired the large-size, high-quality NbAs single crystals up to 5x4x4 mm3 finally. X-ray diffrac-tion and STEM confirmed that they are tetragonal NbAs, which the key is to use seed crystal in vertical growth furnace. Notably, the photoelectric properties of the crystal are obtained under the existing conditions, which paves the way for the follow-up work.

The rise of data science in biology stimulates interdisciplinary collaborations to address fundamental questions. Here, we report the outcome of the first SINFONIA symposium focused on revealing the mechanisms governing plant reproductive development across biological scales. The intricate and dynamic target networks of known regulators of flower development remain poorly understood. To analyze development from the genome to the final floral organ morphology, high-resolution data that capture spatiotemporal regulatory activities are necessary and require advanced computational methods for analysis and modeling. Moreover, frameworks to share data, practices and approaches that facilitate the combination of varied expertise to advance the field are called for. Training young researchers in interdisciplinary approaches and science communication offers the opportunity to establish a collaborative mindset to shape future research.

Micro-blade design is an important factor in the cutting of single cells and other biological structures. This paper describes the fabrication process of three dimensional (3D) micro-blades for the cutting of single cells in a microfluidic “guillotine” intended for fundamental wound repair and regeneration studies. Our microfluidic guillotine consists of a fixed 3D micro-blade centered in a microchannel to bisect cells flowing through. We show that the Nanoscribe two-photon polymerization direct laser writing system is capable of fabricating complex 3D micro-blade geometries. However, structures made of the Nanoscribe IP-S resin have low adhesion to silicon, and they tend to peel off from the substrate after at most two times of replica molding in poly(dimethylsiloxane) (PDMS). Our work demonstrates that the use of a secondary mold replicates Nanoscribe printed features faithfully for at least 10 iterations. Finally, we show that complex micro-blade features can generate different degrees of cell wounding and cell survival rates compared with simple blades possessing a vertical cutting edge fabricated with conventional 2.5D photolithography. Our work lays the foundation for future applications in single cell analyses, wound repair and regeneration studies, as well as investigations of the physics of cutting and the interaction between the micro-blade and biological structures.

Proteomic technology has improved at a staggering pace in recent years, with even practitioners challenged to keep up with new methods and hardware. The most common metric used for method performance is the number of peptides and proteins identified. While this metric may be helpful for proteomics researchers shopping for new hardware, this is often not the most biologically relevant metric. Biologists often utilize proteomics in the search for protein regulators that are of lower relative copy number in the cell. In this review, I re-evaluate untargeted proteomics data using a simple graphical representation of the absolute copy number of proteins present in a single cancer cell as a metric. By comparing single shot proteomics data to the coverage of the most in-depth proteomic analysis of that cell line acquired to-date we can obtain a rapid metric of method performance. Using a simple copy number metric allows visualization of how proteomics has developed in both sensitivity and overall dynamic range when using both relatively long and short acquisition times. To enable reanalysis beyond what is presented here, two available web applications have been developed for single and multi-experiment comparisons with reference protein copy number data for multiple cell lines and organisms.

In this research paper, a high gain transformer less inverter modeling which is used for the smart grid technology or as the stand alone for home appliances is proposed. The proposed transformer less topology provides a higher voltage gain, low cost, small size and simple control stand alone transformer less inverter for home appliances. The above inverter is modeled by using software which is known as MATLAB/ Simulimk.

Two types of trenches cross-section in conventional vertical and brand new reverse-V-shape have fabricated on SCD substrate by micro-jet water-assist laser, the epitaxial lateral overgrowth technique has applied by microwave plasma chemical vapor deposition system in forming multiple micrometer-size channels. Raman and SEM techniques have applied in analyze both types growth layer characterization. Optical microscope has used to test microchannels hollowness. As a result, with the brand new reverse-V-shape trench, epitaxial lateral overgrowth layer reaches higher SCD surface morphology and crystal quality.

Quantum leaps advances in the single-molecule investigative science have been made possible over the past decades through the implication of nanopores, as versatile components on dedicated biosensors. Here, we employed the nanopore-tweezing technique to capture amino acid-functionalized, peptide-nucleic acids (PNA) with -hemolysin-based nanopores, and correlate the ensuing stochastic fluctuations of the ionic current through the nanopore with the composition and order of bases in the PNAs primary structure. We demonstrate that while the system enables detection of distinct bases on homopolymeric PNA or triplet bases on heteropolymeric strands, it also reveals rich insights into the conformational dynamics of the entrapped PNA within the nanopore, relevant for perfecting the recognition capability single-molecule sequencing.

Single cell RNA-seq (scRNA-seq) profiles conceal temporal and spatial tissue developmental information. De novo reconstruction of single cell temporal trajectory has been fairly addressed, but reverse engineering single cell 3D spatial tissue localization is hitherto landmark based, and de novo spatial reconstruction is a compelling computational open problem. Here we show that a new algorithm - named D-CE - for coalescent embedding of single cell transcriptomic networks can address this open problem. We rely merely on the spatial information encoded in the expression patterns of developmental signal transcription factor (DST) genes, and we find that D-CE of cell-cell association DST-transcriptomic networks reliably reconstructs the Geo-seq or single cell samples’ 3D spatial tissue distribution. Comparison to the novoSpaRC and CSOmap (recent and only available de novo 3D spatial reconstruction methods) on 16 datasets and 681 reconstructions, reveals a significantly distinctive superior performance of D-CE.

Single nanowires (NWs) are of great importance for optoelectronic applications, especially solar cells serving as powering nanoscale devices. However, weak off-resonant absorption can limit its light-harvesting capability. Here, we propose a single NW coated with the graded-index dual shells (DSNW). We demonstrate that with appropriate thickness and refractive index of the inner shell, the DSNW exhibits significantly enhanced light trapping compared with the bare NW (BNW), and the NW only coated with the outer shell (OSNW) and the inner shell (ISNW), which can be attributed to the optimal off-resonant absorption mode profiles due to the improved coupling between the reemitted light of the transition modes of the leak mode resonances of the Si core and the nanofocusing light from the dual shells with the graded refractive index. We found that the light absorption can be engineered via tuning the thickness and the refractive index of the inner shell, the photocurrent density is significantly enhanced by 134% (56%, 12%) in comparison with that of the BNW (OSNW, ISNW). This work advances our understanding of how to improve off-resonant absorption by applying graded dual-shell design and provides a new choice for designing high-efficiency single NW photovoltaic devices.

This paper investigated building data from multispectral and single-photon Lidar systems. The multispectral datasets from the individual channels and fused channels were explored. The multispectral and single-photon Lidar data were compared across multiple aspects: the data acquisition geometry, number of echoes, intensity, density, resolution, data defects, noise level, and the absolute and relative accuracy. In addition, we explored the performance of the multispectral and single-photon data for roof plane detection for eight complex/stylish buildings to investigate the suitability of these data for 3D building reconstruction. The building data from the single-photon and multispectral Lidar systems were evaluated with respect to the reference building vector data with an accuracy of better than 5 cm. The advantages and disadvantages of both technologies and their applications in the urban building environment are discussed.

Hydrogen evolution reaction (HER) is one of the most important reaction in electrochemistry. This is not only because it is the simplest way to produce high purity hydrogen and the fact that it is the side reaction in many other technologies. HER actually shaped current electrochemistry because it was in focus of active research for so many years (and it still is). The number of catalysts investigated for HER is immense, and it is impossible to overview them all. In fact, it seems that the complexity of the field overcomes the complexity of HER. The aim of this review is to point out some of the latest developments in HER catalysis, current directions and some of the missing links between a single crystal, nanosized supported catalysts and, recently emerging, single atom catalysts for HER

In this paper, the author obtains an analytic exact form of Heaviside function, which is also known as Unit Step function and constitutes a fundamental concept of the Operational Calculus.In particulat, this function is explicitly expressed in a very simple manner by the aid of purely algebraic representations. The novelty of this work is that the proposed explicit formula is not performed in terms of non – elementary special functions, e.g. Dirac delta function or Error function and also is neither the limit of a function, nor the limit of a sequence of functions with point wise or uniform convergence. Hence, it may be much more appropriate and useful in the computational procedures which are inserted into Operational Calculus techniques and other engineering practices.

Recent advances in single-atom catalysis resulted in readily accessible materials whose application in most catalytic reactions mediated by conventional nanoparticle-based catalysts often results in higher activity and selectivity. Can we expect catalysis by atomically dispersed atoms to find practical applications? Which are the hurdles to be overcome prior to widespread uptake of atomically dispersed metals in industrial synthetic processes and in hydrogen fuel cells?

The use of motion capture has increased from last decade in a varied spectrum of applications like film special effects, controlling games and robots, rehabilitation system, animations etc. The current human motion capture techniques use markers, structured environment, and high resolution cameras in a dedicated environment. Because of rapid movement, elbow angle estimation is observed as the most difficult problem in human motion capture system. In this paper, we take elbow angle estimation as our research subject and propose a novel, markerless and cost-effective solution that uses RGB camera for estimating elbow angle in real time using part affinity field. We have recruited five (5) participants of (height, 168 ± 8 cm; mass, 61 ± 17 kg) to perform cup to mouth movement and at the same time measured the angle by both RGB camera and Microsoft Kinect. The experimental results illustrate that markerless and cost-effective RGB camera has a median RMS errors of 3.06° and 0.95° in sagittal and coronal plane respectively as compared to Microsoft Kinect.

Although good field emission from graphene has been demonstrated from a wide variety of different microfabricated structures, very few of them can be used to improve the design of cold field emitters for electron microscopy applications. Most of them consist of densely packed nano-emitters, which produce a large array of defocused overlapping electron beams, and therefore cannot be subsequently focused down to a single nanometer electron probe. This paper reviews the kind of single-tip cathode structures suitable in cold field emission guns for instruments such as scanning electron microscopy, transmission electron microscope or scanning transmission electron microscopy, and reviews progress in fabricating them from graphene-based materials.

Solvent-free, single-ion conducting electrolytes are sought after for use in electrochemical energy storage devices. Here, we investigate the ionic conductivity and how this property is influenced by segmental mobility and conducting ion number in crosslinked single-ion conducting polyether-based electrolytes with varying tethered anion and counter-cation types. Crosslinked electrolytes are prepared by the polymerization of poly(ethylene glycol) diacrylate (PEGDA), poly(ethylene glycol) methyl ether acrylate, and ionic monomers. The ionic conductivity of the electrolytes is measured and interpreted in the context of differential scanning calorimetry and Raman spectroscopy measurements. A lithiated crosslinked electrolyte prepared with PEG₃₁DA and STFSI monomers is found to have a lithium ion conductivity of 3.2 × 10^-6 and 1.8 × 10⁻⁵ S/cm at 55 and 100 °C, respectively. The percentage of unpaired anions for this electrolyte was estimated at about 23% via Raman spectroscopy. Despite the large variances in metal cation – STFSI binding energies as predicted via DFT and large variations in ionic conductivity, STFSI-based crosslinked electrolytes with the same charge density and varying cations (Li, Na, K, Mg, and Ca) were estimated to all have unpaired anion populations in the range of 19 to 29%.

The past two decades has seen a growing demand for high-power, high-voltage utility scale inverters mostly fueled by the integration of large solar PV and wind farms. Multilevel inverters have emerged as the industry choice for these megawatt range inverters because their reduced voltage stress, capable of generating an almost sinusoidal voltage, in-built redundancy, among others. This paper present a new Switched-Source Multilevel Inverter (SS MLI) architecture. The new inverter show superior over existing topologies. It has reduced voltage stress on the semiconductor, uses less number of switches –reduced size/weight/cost and increased efficiency. The new SSMLI is comprised of two voltage sources (V₁, V₂) and 6 switches. It is capable of generating 5-level output voltage in symmetric modes (i.e., V₁ = V₂), and 7-level output voltage in asymmetric modes (i.e., V₁ ≠ V₂). To demonstrate the validity of the proposed inverter, simulations results using MATLAB^® /Simulink^® for 5- and 7-level output voltages are presented . The simulations are also verified experimentally using a laboratory prototype.

The rationalization of single molecule magnets’ (SMMs) magnetic properties by quantum mechanical approaches represents a major task in the field of the Molecular Magnetism. The fundamental interpretative key of molecular magnetism is the phenomenological Spin Hamiltonian and the understanding of the role of its different terms by electronic structure calculations is expected to steer the rational design of new and more performing SMMs. This paper deals with the ab initio calculation of isotropic and anisotropic exchange contributions in the Fe(III) dimer [Fe₂(OCH₃)₂(dbm)₄]. This system represents the building block of one of the most studied Single Molecule Magnets ([Fe₄RC(CH₂O)₃)₂(dpm)₆] where R can be an aliphatic chain or a phenyl group just to name the most common functionalization groups) and its relatively reduced size allows the use of a high computational level of theory. Calculations were performed using CASSCF and NEVPT2 approaches on the X-ray geometry as assessment of the computational protocol, which has then be used to evinced the importance of the outer coordination shell nature through organic ligand modelization. Magneto-structural correlations as function of internal degrees of freedom for isotropic and anisotropic exchange contributions are also presented, outlining for the first time the extremely rapidly changing nature of the anisotropic exchange coupling.

Reasonable allocation of production plans and saving the overall electricity cost are crucial for large manufacturing conglomerates, which is an effective way for conglomerates to realize open-source and cost-saving. This paper develops an optimization model of off-site industrial production scheduling for enterprises in response to the problems of high electricity costs due to the irrational allocation of production schedules on the demand side of China's electric power and the difficulty of promoting industrial and commercial distributed photovoltaic (PV) projects in China. The model makes full use of the conditions of different PV resources and different electricity prices in different places to optimize the scheduling of industrial production in different places. The model is embedded with two sub-models of the electricity price prediction model and distributed photovoltaic kWh cost model to complete the model parameters, in which the electricity price prediction model utilizes the LSTM neural network. The integrated model is then solved by the particle swarm algorithm. To verify the effectiveness of the model in solving the problem of off-site production scheduling on the demand side of electricity, the research team researched two off-site pharmaceutical factories belonging to the same large pharmaceutical company. Finally, the research data were substituted into the model for solving, and it was concluded that the optimization model could significantly reduce the cost of electricity consumption of the enterprise by about 7.9 %.

Effects of oxygen content on microstructure and creep property of FGH96 superalloy were investigated. When oxygen content increased from 135ppm to 341ppm, prior particle boundary (PPB) rose from degree 2 to degree 3, and the size of γ′ phase on PPB enlarged from 1.07μm to 1.27μm, and MC carbide size grew from 77.4nm to 104.0nm. Meanwhile, the steady creep rate accelerated form 4.34×10-3 h-1 to 1.87×10-2 h-1, and the creep rupture life shortened from 176h to 94h, and the creep rupture mode transferred from intergranular and transgranular mixed fracture to along PPB fracture. During creep, the micro-twins formation and gliding will be restrained by ∑3 boundaries. FGH96 superalloy with higher oxygen content contains less ∑3 boundaries and its micro-twins cross slipped instead of single direction slip in lower oxygen content superalloy. Consequently, specimen with higher oxygen content creeped faster and raptured earlier.

This work is aimed at investigating the capabilities and limits of the mid-fidelity numerical solver DUST for the evaluation of wind turbines aerodynamic performance. In particular, this study was conducted by analysing the benchmarks NREL- 5MW and Phase VI wind turbines, widely investigated in literature by from experimental and numerical activities. The work started by simulating simpler configuration of the NREL- 5MW turbine to progressively integrate complexities such as shaft tilt, cone effects and yawed inflow conditions, offering a detailed portrayal of their collective impact on turbine performance. A particular focus was then given to the evaluation of aerodynamic responses from the tower and nacelle, as well as aerodynamic behavior in yawed inflow condition, crucial for optimizing farm layouts. In the second phase, the work was focused on NREL Phase VI turbine due to the availability of experimental data on this benchmark case. Comparison of DUST simulations results with both experimental data and high-fidelity CFD tools shows the robustness and adaptability of this mid-fidelity solver for this applications, thus opening a new scenario for the use of such mid-fidelity tools for the preliminary design of novel wind turbines configurations or complex environments as wind farms, characterised by robust interactional aerodynamics.

River bed materials serve multiple environmental functions as a habitat for aquatic invertebrates and fishes. At the same time, the particle size of the bed material reflects the tractive force of the flow regime in a flood and provides useful information for flood control. The traditional river bed particle size surveys, such as sieving, require time and labor to investigate river bed materials. The authors proposed a method to classify aerial images taken by unmanned aerial vehicle (UAV) using convolutional neural networks (CNN), our previous study showed that terrestrial riverbed material could be classified with high accuracy. In this study, we attempted to classify riverbed materials distributed in shallow waters where the bottom can be seen from UAVs. After training the CNN to classify the images with the same grain size as being in the same class even if the surface flow types taken overlapping the riverbed material were different, the total accuracy reached 90.3%. Moreover, the proposed method was applied to the wide-ranging area to determine the distribution of the particle size. In parallel, the microtopography was surveyed using Lidar-UAV, and the relationship between the microtopography and particle size distribution was discussed. In the steep section, coarse particles were distributed and formed a rapid. Fine particles were deposited on the upstream side of those rapids, where the slope had become gentler due to the damming. There was good agreement between the microtopographical trends and the grain size distribution.

The interactions of metal ions with fulvic acids resulted in changes in the particle size and charge. Particle size distribution was trimodal for fulvic acids, bimodal for fulvic complexes with calcium and magnesium, and copper-fulvic complexes had only one size fraction. The compensation of negative charge of carboxylic and phenolic functional groups by positive charged metal ions resulted in the increase in zeta potential which was getting closer to zero in the case of copper-fulvic complexes. However, all metal humic complexes behaved as colloidally unstable which resulted in visually observable sedimentation. Calorimetric measurements provided positive values of changes in enthalpy which indicated endothermic processes. In contrast quantum chemical calculations as well as experiments with model compounds provided negative values indicated exothermic processes. Changes in Gibbs energy were determined as negative and changes in entropy as positive which meant spontaneous processes.

An axial wind turbine's performance is analyzed numerically using geometrical and operational parameters. The performance of an axial wind turbine is simulated using three-dimensional computational fluid dynamics (CFD) and compared with experimental data, which confirms the validity of the assumptions and method used. A study of the effects of air in clean and sand particlesy conditions is then conducted. A study was also conducted on mechanical power and the impact of the blade tip on the extension of the vortex. It has been found that different sand particle sizes have a significant impact on wind performance numerically from 0.1 to 0.9, and the results indicate that mechanical power and thrust increase as wind velocity increases, but larger sand particle sizes reduce power, thrust, and torque as wind velocity increases. The turbulence intensity causes the pressure distribution on the walls to be irregular, thereby increasing mechanical power and propulsion force. Moreover, as the wind velocity increases, the tip speed ratio increases and the vortexes are subsequently extended.

Objective To measure, exposure to PM2.5 particles in outdoor smoking areas and changes in breathing rates in patients with asthma or chronic obstructive pulmonary disease (COPD). Setting Sixty venues in Czechia, Ireland and Spain, in an open, non-randomised, clinical trial. Participants We studied 60 patients-30 asthma patients (Female 63.3%), with a mean age (+/-standard deviation [SD]) of 47.4 (19.0 SD), and 30 COPD patients (Female 51.6%), mean age 63.5 (10.1 SD), smokers, non-smokers or ex-smokers, recruited through medical clinics. Intervention Patients wore a PM2.5 particle monitor (AirSpeck), and a breath monitor (RESpeck) for 24 hours to determine changes in breathing rates (Br) at rest and during a visit to an outside smoking area. Spirometry and breath CO were measured before and the day after visiting an outdoor smoking area. Results PM2.5 levels in the 60 venues were highly variable, in 1 premises levels of PM2.5 were sustained for at least 15 minutes at ≥ 2,000 µg/m3, in 4 premises, ≥ 500 (range 1,933-539) µg/m3, in 8 premises, ≥ 200(range 480-203) µg/m3, in 9 premises, ≥ 100 (range 170-108) µg/m3, in 8 premises, ≥ 40 (range 80.5- 40.1) µg/m3, in 9 premises, ≥ 25 µg/m3, in 10 premises, ≥ 10 µg/m3, in 8 premises, and ≤10 µg/m3 in only 3 premises, with a single wall. The overall breathing rates/minute (Br)did not change significantly but in 28 patients mean Br increased from 21.47 (1.74 SD) to 22.8 (2.29 SD), change of -1.35 (-1.80-0.91 C.I), p value 0.00 and mean in 29 patients Br decreased from 21.95(2.43 SD) to 20.38(2.79 SD), 1.57(1.03-2.12 C.I), p value 0.00. Conclusion Exposure to high levels of PM2.5, and associated alteration of patients’ breathing rates occurred in outdoor smoking areas despite national comprehensive smokefree laws. These exposure levels support the abolition of such areas. (Words 295) ClinicalTrials.gov ID: NCT03074734 Ethics: Approval Number: Ref: 15-103

The double nature, wave and corpuscular, of the material particles is usually considered incomprehensible as it cannot be represented visually. It is proposed to the student, in the introductory courses, as a fact justified by quantum interference experiments of which, however, no further analysis is possible. In this note we propose a description of the wave function in terms of a simple electrical analogy, which reproduces at least some of its essential properties. The aim we propose is to provide a cognitive representation of an analogical type: starting from a classical context (electrical circuits) and introducing in an appropriate way the notions of "wave" and "particle", we show how typically quantum properties such as delocalization and entanglement emerge in a natural, understandable and intuitive way.

The steady-state multiplicity of the porous, non-isothermal, catalyst pellet when two parallel and consecutive chemical reactions take place was analysed in this work. The geometry selected for the catalyst pellet is finite hollow cylinder. A numerical multigrid continuation technique with the preconditioned conjugate gradient squared as coarse grid solver was used. The continuation parameter is the dimensionless adiabatic heat rise (Prater number) for the first chemical reaction. The effect of the other governing parameters was analysed and the results are compared to those provided by the single chemical reaction.

In this study, a simple and direct numerical scheme is proposed for the similarity solution of Smoluchowski coagulation equation based on Taylor series expansion method of moment. The results show that the present method is convergence with high accuracy by comparison with previous work in the literatures.

It is shown that the relationship between gravity and quantum physics can be described in terms of the symmetry break of space due to elementary constituents, dubbed as “darks”, which constitute a universal energetic background field that extends from the cosmological level down to the nuclear level. It requires (a) the awareness of the polarisable second elementary dipole moment of a recently discovered third Dirac particle type, next to the electron-type and the Majorana-type, and (b) the awareness that Einstein’s Lambda is not a constant of nature, but, instead, a covariant integration constant with a value that depends on the scope of the cosmological system under consideration, such as solar systems and galaxies, eventually showing up as the Cosmological Constant at the level of the universe. The relationship has been made explicit by relating two major gravitational constants quantaties (the gravitational constant and Milgrom’s acceleration constant) with a single nuclear quantity (the rest mass of the pion derived from the Higgs boson value).

Nature-inspired algorithms are very popular tools for solving optimization problems inspired by nature. However, there is no guarantee that optimal solution can be obtained using a randomly selected algorithm. As such, the problem can be addressed using trial and error via the use of different optimization algorithms. Therefore, the proposed study in this paper analyzes the time-complexity and efficacy of some nature-inspired algorithms which includes Artificial Bee Colony, Bat Algorithm and Particle Swarm Optimization. For each algorithm used, experiments were conducted several times with iterations and comparative analysis was made. The result obtained shows that Artificial Bee Colony outperformed other algorithms in terms of the quality of the solution, Particle Swarm Optimization is time efficient while Artificial Bee Colony yield a worst case scenario in terms of time complexity.

Nature-inspired algorithms are very popular tools for solving optimization problems inspired by nature. However, there is no guarantee that optimal solution can be obtained using a randomly selected algorithm. As such, the problem can be addressed using trial and error via the use of different optimization algorithms. Therefore, the proposed study in this paper analyzes the time-complexity and efficacy of some nature-inspired algorithms which includes Artificial Bee Colony, Bat Algorithm and Particle Swarm Optimization. For each algorithm used, experiments were conducted several times with iterations and comparative analysis was made. The result obtained shows that Artificial Bee Colony outperformed other algorithms in terms of the quality of the solution, Particle Swarm Optimization is time efficient while Artificial Bee Colony yield a worst case scenario in terms of time complexity.

In this study, a monoethanolamine aerosol growth model was developed to investigate the aerosol growth factor. Interactions among the internal conditions in an absorber were considered in this aerosol model. Additionally, an experiment was conducted to measure aerosol particle size, for collecting in-house validation data. Sucrose was used as the aerosol nuclei instead of sulfuric acid to prevent the corrosion of equipment used in the experiment. Experimental results showed that the outlet aerosol sizes increased to the same size regardless of the sucrose concentrations. The aerosol growth model was validated using the in-house experimental data. The aerosol growth model efficiently predicted the aerosol size. For investigating aerosol growth effects, particle number concentration was determined to be the primary factor affecting aerosol growth and amine emissions. When the particle number concentration increased, the aerosol size decreased, whereas the MEA emission increased.

Classical mechanics describes the laws of motion in the macroscopic material world, while quantum mechanics describes the laws of motion in the microscopic material world that classical mechanics cannot explain, and achieves a highly accurate mathematical representation of the laws of microscopic physical motion. But even with such a successful theory, there is confusion about the probability wave. Therefore, this paper attempts to improve the physical definition of the conceptual basis of quantum mechanics, thus solving the confusion of quantum mechanical probability waves, and finally surprisingly discovered another feasible interpretation of the principle of cosmic redshift and the invariance of the speed of light.

We use a random gap model to describe a metal-insulator transition in three-dimensional semiconductors due to doping and find a conventional phase transition, where the effective scattering rate is the order parameter. Spontaneous symmetry breaking results in metallic behavior, whereas the insulating regime is characterized by the absence of spontaneous symmetry breaking. The transition is continuous for the average conductivity with critical exponent equal to 1. Away from the critical point the exponent is roughly 0.6, which may explain experimental observations of a crossover of the exponent from 1 to 0.5 by going away from the critical point.

In the past 100 years, quantum theory has achieved remarkable achievements and formed a relatively mature system, but at the same time there are still some incomplete places. For example: What is the origin of quantum? What is the origin of quantum entanglement? What is the origin of quantum mechanical wave-particle duality? This is still a problem that the existing quantum theory has not solved. Therefore, this paper attempts to seek a classic interpretation of quantum mechanics to make up for the shortcomings of existing quantum theory. In the latest research, this paper finds a classic interpretation of blackbody radiation, which can explain the discontinuity of light energy from the perspective of classical mechanics. Based on this discovery, this paper successfully explains the origin of quantum, quantum entanglement and wave-particle duality, and eliminates the confusion of quantum mechanical probability waves.

Muography is an expanding technique for the investigation of the internal structure of targets of interest in geophysics. The flux of high penetrating muons produced by primary cosmic rays is attenuated by traversing kilometer size objects like X-ray flux is attenuated through the human body. This gives the possibility to study the internal structure of volcanoes or underground cavities, e.g., starting from the measure of the muon flux transmission through the target. Many groups of researchers working with this technique have to face with high background level that afflicts the reconstruction of muon tracks near the horizontal direction. An important source of background is the scattering of particles near the detector that produces a wrong reconstruction of the incoming direction. An innovative technique based on Cherenkov radiation was investigated by means of Monte Carlo simulations developed in Geant4 toolkit and MATLAB. The results reported in this paper show that the presented technique is able to correctly distinguish the incoming direction of particles with an efficiency higher than 98%. This new kind of detector could represent an alternative for high resolution charged particle tracking also for other applications.

In this investigation magnetic γ-Al2O3 ceramic nanocomposite particles bearing epoxide functionality are prepared following a multistep process. The ultimate nanocomposite particles are named as γ-Al2O3/Fe3O4/SiO2/poly(glycidyl methacrylate (PGMA). The surface property is evaluated by carrying out the adsorption study of Remazol navy (RN), a model reactive azo dye, on both γ-Al2O3/Fe3O4/SiO2 and γ-Al2O3/Fe3O4/SiO2/PGMA nanocomposite particles. The adsorption is carried out at the point of zero charge (PZC) to neutralize the effect of particle surface charge. The adsorption rate is very fast, reached equilibrium (qe) value within five min. Due to mesoporous structure of silica layer γ-Al2O3/Fe3O4/SiO2 nanocomposite particles possessed relatively higher specific surface area and magnitude of adsorption is dependent on the total specific surface area. The introduction of epoxide functionality favored high adsorption capacity in mass per unit surface area. The adsorption process strictly followed Langmuir model. Thermodynamic equilibrium parameters implied that irrespective of surface functionality the adsorption process is spontaneous and exothermic. Pseudo-second-order rate kinetic model is more appropriate to explain the adsorption kinetics.

In this paper, an icosahedral non – body centered model to simulate the periodic structure of homogeneous particulate composites, by predicting the particle arrangement, is presented. This model has yielded three different variations which correspond at three different deterministic particle configurations. In addition, the concept of boundary interphase between matrix and inclusions was taken into account. Thus, the influence of particle vicinity was examined in parallel with the interphase concept on the thermomechanical properties of the overall material. Next, by the use of this model the authors derived a closed – form expression to estimate the thermal conductivity of this type of composites. To test the validity of the model, the theoretical values arising from the proposed formula were compared with other theoretical predictions obtained from several accurate formulae found in the literature and an adequate accordance was observed.

Gigantic particle accelerators, incredibly complex detectors, an antimatter factory and the discovery of the Higgs boson – this is part of what makes CERN famous. Only a few know that CERN also hosts the world largest Open Access initiative: SCOAP3. The Sponsoring Consortium for Open Access Publishing in Particle Physics (SCOAP3) started operation in 2014 and has since supported the publication of 19,000 Open Access articles in the field of particle physics, at no direct cost, nor burden, for individual authors worldwide. SCOAP3 is made possible by a 3,000-institute strong partnership, where libraries re-direct funds previously used for subscriptions to ’flip’ articles to ’gold Open Access’. With its recent expansion, the initiative now covers about 90% of the journal literature of the field. This article describes the economic principles of SCOAP3, the collaborative approach of the partnership, and finally summarizes financial results after four years of successful operation.

In this study, we attempted to verify the hypothesis that total metals bound to dust of different particle sizes may reflect pollution levels, but cannot predict its bioavailability and risks in human health assessments. Dust samples were collected using active sampling method; during the dry season months of November, 2014 to March, 2015 at different locations in Akure (7˚10ʹN and 5˚15ʹE). The samples were sorted into different particle sizes (< 10µm, 10 – 50 µm, >50µm), analyzed for some physicochemical properties and assessed for metals bioavailability using two-step physiological extraction method. The amount of metals (Cd, Cu, Cr, Ni, Pb, Zn and Mn) released in each particle sizes were determined using Perkin-Elmer 6000 Inductively Coupled Plasma - Atomic Emission Spectrometry (ICP-AES) analysis. The results showed that bioavailability of some metals (Cd, Ni, Pb, and Zn) decreases with increasing particle sizes, however, the reverse trend was observed for Mn, Cu and Fe concentrations. This may be attributed to some combination of physicochemical characteristics of the dust and metal speciation. Hence, it was concluded that metal bioaccessibility in dust can best be described by the knowledge of physicochemical characteristics. The exposure dose of the metals showed that cancer risks due to inhalation were very high when compared to other exposure routes (ingestion and dermal contact). The calculated non-cancer (HQ) and cancer risk (HI) for humans in the area showed values higher than unity, indicating possibility of the metals’ body burden.

Smoothed particle hydrodynamics (SPH) is regarded as a pure Lagrangian approach, which can solve fluid dynamics problems without the creation of mesh. In this paper, a paralleled SPH solver is developed to solve particle-based computational acoustics (PCA). The aim of this paper is to study the feasibility of using SPH to solve acoustic problems and to improve the efficiency of solving processes by paralleling some procedures on GPU during calculating. A stand SPH code running serially in a CPU is proposed to solve wave equation. This is a wave propagating in a two-dimensional domain. After finishing the computation, the results are compared with the theoretical solutions and they agree well. So its feasibility is verified. There are two main methods for searching neighbor particles: all-pair search method and linked-list search method. Both methods are used in different codes to simulate an identical problem and their runtimes are compared to investigate their searching efficiencies. The runtime results show that linked-list search method has a higher efficiency, which can save a lot of searching time when simulating problems with huge amounts of particles. Furthermore, the percentages of different procedures’ runtimes in a simulation are also discussed to find the most consuming one. Then, some codes are modified to run in different GPUs and their runtimes are compared with those of serial ones on a CPU. Runtime results show that the paralleled algorithm can be more than 80 times faster than the serial one. The result shows that GPU paralleled SPH computing can achieve desirable accuracy and speed in solving acoustic problems.

In this paper we report a new development on the numerical model for aluminum-steam combustion. This model is based on diffusion flame of continuum regime and the thermal equilibrium between the particle and the flow field, which can be used to calculate the aluminum particle combustion model for two phase calculation conditions. The model prediction is in good agreement with the experimental data. A new type of vortex combustor was proposed for the combustion of aluminum and steam, and the mathematical model of the two phase reacting flow with in this combustor was established. The turbulence effects are modeled using the Reynolds Stress Model (RSM) with Linear Pressure-Strain approach, and the Eddy-Dissipation model is used to simulate the gas phase combustion. Aluminum particles are injected into the vortex combustor and form a swirling flow around the chamber and their trajectories are traced using the Discrete Phase Model (DPM). The simulation results show that the vortex combustor can achieve high efficient combustion of aluminum and steam. The influencing factors, such as the eccentric distance of the inlet of aluminum particles, particle size and steam inlet diameter, etc., are studied. The work described in this paper represents an attempt to the design of a vortex combustor in order to increase aluminum combustion efficiency.

Resistance against amitraz in varroa mite populations has become a subject of interest in recent years due to increasing reports of reduced field efficacy of amitraz treatments, especially from some beekeepers in France and the United States. The loss of amitraz as a reliable tool to effectively reduce varroa mite infestation in the field could severely worsen the position of beekeepers in the fight to keep varroa infestation rates in their colonies at low levels. In this publication, we present data from French apiaries, collected in the years 2020 and 2021. These data include field efficacy of an authorized amitraz-based varroa treatment (Apivar®) and results of laboratory sensitivity assays of varroa mites exposed towards the reference LC90 concentration of amitraz. In addition, a total of 240 varroa mites from Eastern, Central, and Southern regions in France that were previously classified as either “sensitive” or “resistant” towards amitraz in a laboratory sensitivity assay were genotyped. The genetic analyses of mite samples are focused on the β−adrenergic-like octopamine receptor, which is considered as the main target site for amitraz in varroa mites. Special attention was given to a single nucleotide polymorphism (SNP) at position 260 of the ORβ-2R-L gene that had previously been described by Hernández Rodríguez et al. (2021) as associated to the resistance to amitraz in French varroa mites. Our findings confirm that amitraz resistance occurs in patches or “islands of resistance” with a less severe reduction in treatment efficacy compared to pyrethroid resistance or coumaphos resistance in varroa mites. The results of our genetic analyses of varroa mites call into question the hypothesis of the SNP at position 260 of the ORβ-2R-L gene being directly responsible for amitraz resistance development.

With the rising cost of animal feed protein, finding affordable and effective substitutes is crucial. Walnut kernel cake, a polyphenols, fiber, protein and fat-rich byproduct of walnut oil extraction, has been underexplored as a potential protein replacement in pig feed. In this study, we found that feeding large Diqing Tibetan pigs walnut kernel cake promoted adipose deposition and improved pork quality during pig growth. Transcriptome analysis revealed the upregulation of genes ANGPTL8, CCNP, ETV4, and TRIB3, associated with adipose deposition. Pathway analysis highlighted enrichment in adipose-deposition-related pathways, including PPAR, Insulin, PI3K-Akt, Wnt, and MAPK signaling. Further analysis identified DEGs (differentially expressed genes) positively correlated with adipose-related traits, such as PER2 and PTGES. Single-cell transcriptome data pointed to the specific expression of CD248 and PTGES in adipocyte progenitor/stem cells (APSCs), pivotal for adipocyte differentiation and adipose deposition regulation. This study demonstrates walnut kernel cake's potential to substitute soybean cake in pig feed, providing high-quality protein and promoting adipose deposition. It offers insights into feed protein replacement, human functional food, fat metabolism, and related diseases, with marker genes and pathways supporting pig breeding and pork quality improvement.

We used a mixed-method single-case experimental research design to examine the effect of modelling (peer versus non-peer) on exercise self-efficacy in stroke survivors who participated in a community-based exercise program. Quantitative data were obtained using a ABCA design: (A1) no model/baseline 1 (3 weeks); (B) peer model (6 weeks); (C) non-peer model (6 weeks); and (A2) no model/baseline 2 (3 weeks). Four participants completed self-efficacy questionnaires after each weekly session. Qualitative data were obtained using researcher diaries and two semi-structured interviews: after B and A2. Based on quantitative and qualitative results, participants reported higher exercise self-efficacy in the model conditions, with ratings appearing highest for the non-peer model. This finding could be due to a lack of full integration of the peer model and low feelings of similarity. Modelling in general could help people recovering from a stroke increase their exercise self-efficacy, but non-peer models may not be most advantageous.

Recently, nanobodies have taken center stage in research on drug discovery and development. Several therapeutic possibilities using nanobodies are presently undergoing clinical trials and waiting for FDA approval. The goal of this study was to emphasize the potential of nanobodies as therapeutic agents by concentrating on the most recent published studies that examined their properties, manufacturing, and possible applications. This article demonstrates that the unique properties of nanobodies in comparison to conventional antibodies, which are based on their small size and offer a number of benefits, make them seem to have a promising future. These advantages include the ability to access complex or hidden target sites that may be elusive to their larger antibody counterparts, and increased resilience against extreme conditions like tempera-ture changes and pH variations. As a result, nanobodies seem to have a bright future as adaptable tools for imaging in cancer and non-malignant diseases, as well as for in vitro and in vivo diagnostic and therapeutic potential for a variety of conditions, including oncology, infectious, metabolic, neurological, and other conditions like ophthalmologic, immune-mediated, and genetic disorders. More research is required to determine their effectiveness and safety in clinical applications. The current analysis offers a thorough overview of the therapeutic uses for nanobody products that are either on the market or undergoing clinical trials.

Single parenting is a social phenomenon that has always been in existence and is as old as mankind, and today the number of single-parent families has been rampantly increasing. As a result, the researcher conducted a study in the Gambella region of Ethiopia to investigate the economic and educational implications of single parenting on female adolescent students. The study employed a qualitative research approach with a case study research design. The researchers used the purposive sampling technique to select the research area and research participants for in-depth interviews and focus group discussions, and eleven interviewees, seventeen participants in focus group discussions within two groups, and seven key informants participated. Interviews were audio-recorded, transcribed, translated, and thematically analyzed. Interviews with research participants revealed that adolescent girl students from single-parent homes experience financial difficulties. The study also explored that students with single parents are more likely to be absent from school, to come late to school, to score low marks, and to drop out of school. Therefore, having an understanding of the benefits of having intact parents for the well-being of adolescents and raising children together should be advocated.

In recent years, graphene has received so much attention because of its superlative properties and its potential to revolutionize electronics especially in VLSI. This study analyzes the effect of single event upset (SEU) in SRAM cell which employs metal-oxide semiconductor type graphene nano-ribbon field effect transistor (MOS-GNRFET) and compares the results respectively with another SRAM cell designed in PTM 10nm FinFET node. Our simulation show there is a change in data stored in the SRAM after heavy ion strike. However, it recovers from radiation effects after 0.46 ns for GNRFET and 0.51 ns for FinFET. Since the degradation observed in Q and Qb of GNRFET SRAM are 2.7X and 2.16X as compared to PTM nano-MOSFET, we can conclude that GNRFET is less robust to single effect upset. In addition, the stability of SRAM can be improved by increasing the supply voltage VDD.

Single-cell RNA sequencing data facilitates investigation of cell heterogeneity and subpopulations as well as differentially abundant states however modern single-cell RNA sequencing datasets are growing in size and complexity requiring advances in the bioinformatic methods that analyze them. Many methods exist for each step of analysis including read alignment, normalization, quality control, batch effect correction, imputation and dimensionality reduction. With so many options to choose from at each step of the analysis, benchmarking and a synthesis of the literature on the methods available is necessary to inform biological researchers on the most optimal workflow for their data. Here, recent key methods of analysis are highlighted with a focus on methods that facilitate identification of cell subpopulations and differentially abundant cell states. With a constantly expanding toolset for each step in single-cell RNA sequencing dataset analysis, biological researchers should stay informed to utilize the most applicable methods for their own analyses.

Two mononuclear Ru(III) complexes of formula trans-[RuCl4(Hgua)(dmso)]·2H2O (1) and trans-[RuCl4(Hgua)(gua)]·3H2O (2) [Hgua = protonated guanine (gua), dmso = dimethyl sulfoxide] have been synthesized and characterized magnetostructurally. Compounds 1 and 2 crystallize in the monoclinic system with space groups P21/n and Pc, respectively. Each Ru(III) ion in 1 and 2 is six-coordinate and bonded to four chloride ions and one (1) or two (2) nitrogen atoms from guanine molecules and one sulfur atom (1) of a dmso solvent molecule, generating quasi regular octahedral geometries in both cases. In their crystal packing, the Ru(III) complexes are self-assembled mainly through an extended network of N-H⋯Cl hydrogen bonds and π⋯Cl type intermolecular interactions, forming novel supramolecular structures based on this paramagnetic 4d metal ion. Variable-temperature dc magnetic susceptibility measurements performed on microcrystalline samples of 1 and 2 show a different magnetic behavior. While 1 is a ferromagnetic compound at low temperature, 2 exhibits a behavior typical of noninteracting mononuclear Ru(III) complexes with S = 1/2. Ac magnetic susceptibility measurements reveal slow relaxation of the magnetization in the presence of external dc fields only for 2, hence indicating the occurrence of field-induced single-ion magnet (SIM) phenomenon in this mononuclear guanine-based Ru(III) complex.

In this study, the influence of graphene oxide nanoparticles on the bond-slip behavior of fiber and fly ash based geopolymer paste was examined. Geopolymer paste incorporating graphene oxide nanoparticles solution was cast in half briquetted specimens and embedded with a fiber. Three types of fibers were used: steel, polypropylene, and basalt. The pullout test was performed at two distinct speeds: 1 mm/second and 3 mm/second. Results showed that the addition of graphene oxide increased the compressive strength of geopolymer by about 7%. The bond-slip responses of fibers embedded in geopolymer mixed with graphene oxide exhibited higher peak stress and toughness as compared to those embedded in normal geopolymer. Each fiber type also showed different mode of failure. Both steel and polypropylene fibers showed full bond-slip responses due to their high ductility. Basalt fiber, on the other hand, because of its brittleness, failed by fiber fracture mode which showed no-slip in pull out responses. Both bond strength and toughness were found to be rate sensitive. The sensitivity was higher in graphene oxide/geopolymer than in conventional geopolymer.

Intratumoral heterogeneity associates with more aggressive disease progression and worse patient outcomes. Understanding the reasons enabling the emergence of such heterogeneity remains incomplete, which restricts our ability to manage it from a therapeutic perspective. Technological advancements such as high-throughput molecular imaging, single-cell omics and spatial transcriptomics now allow recording the patterns of spatiotemporal heterogeneity in a longitudinal manner, thus offering insights into the multi-scale dynamics of its evolution. Here, we review latest technological trends and biological insights from molecular diagnostics as well as spatial transcriptomics, both of which have witnessed a burgeoning growth in recent past in terms of mapping heterogeneity within tumor cell types as well as stromal constitution. We also discuss ongoing challenges, indicating possible ways to integrate insights across these methods to have a systems-level spatiotemporal map of heterogeneity in each tumor, and a more systematic investigation of implications of heterogeneity for the patient outcomes.

Psychotherapy is one of the evidence-based clinical interventions for the treatment of depression in older adults with dementia. Randomized Controlled Trials are often the first methodological choice to gain evidence, yet they are not applicable to a wide range of humanistic psychotherapies. Amongst all, the efficacy of the Gestalt therapy (GT) is under-investigated. The purpose of this paper is to present a research protocol aiming to assess the effects of a GT-based intervention on people with dementia (PWD) and the indirect influence on their family carers. The study implements the Single-Case Experimental Design with Time-Series Analysis that will be carried out in Italy and Mexico. Ten people in each country, who received a diagnosis of dementia and present depressive symptoms, will be recruited. Eight or more GT sessions will be provided whose fidelity will be assessed by the GT Fidelity Scale. Quantitative outcome measures are foreseen for monitoring participants’ depression, anxiety, quality of life, carers’ burden, and the caregiving dyad mutuality, at baseline and follow-up. The advantages and limitations of the research design are considered. If GT will result effective in the treatment of depression in PWD, it could enrich the range of evidence-based interventions provided by healthcare services.

This paper examines certain implications from the literature on Tiebout’s model of local gov-ernment service provision, particularly Hamilton’s extension of the model to include local control of land use and property taxation. Our empirical analysis focuses on the use of fiscal zoning to lower property tax rates, a topic that has not been addressed in the extensive Tiebout literature. Using data for over 100 municipalities in the Miami, Florida, metropolitan area, we specify property tax rates as a function of fiscal zoning measures, other municipal characteristics, and tax mimicking. We conclude that single-family zoning is by far the most important variable ex-plaining municipal property tax rates.

Abstract: A lower bed single row for pineapple cultivation could protect pineapple from soil erosion in rainy season and during drought, however, disease problem could arise due to water logging. Two experiments using a lower bed single row was done to understand the ability of gypsum providing soil calcium (Ca) available to pineapple plant, resistance to heart rot disease, and give better effect on crop growth and fruit quality of the pineapple in Ultisol soil. In the first trial, four level dosis of gypsum (0, 1.0, 1.5, 2.0 Mg ha-1) and dolomite 2 Mg ha-1 were applied by spreading and incorporated into the soil which have saturated with inoculums of Phytophthora nicotianae. In the second trial, gypsum treatments (0, 1.0, 1.5, 2.0, 2.5 Mg ha-1) were applied in the row between the single row beds as a basic fertilizer. The result showed that P. nicotianae attacked the pineapple plants in all treatments at 6 weeks after planting (WAP), and at 10 WAP, the mortality of dolomite treatment reached 63.8%, significantly different than that for gypsum treatments (3.3-14.3%). In the second experiment, gypsum increased plant weight significantly at 3 until 9 months after planting especially when it was applied 1.5-2.5 Mg ha-1. Fruit texture, total soluble solid (TSS), titratable acidity (TA) were not significant different among the treatment but all meet the standards for grades of canned pineapple. Result showed that soil applied gypsum before planting provides soil calcium and met the plant Ca requirement during a period of early and fast growth step and safe for heart rot disease.

Threats emerging from microplastics pollution in the marine environment have received much global attention. This review assessed sources, fate, and impacts of microplastics in marine ecosystems and identified gaps. Most studies document ubiquity of microplastics and associated environmental effects. Effects include impacts to marine ecosystems, risks to biodiversity, and threats to human health. Microplastic leakage into marine ecosystems arises from plastic waste mismanagement and a lack of effective mitigative strategies. This review identified a scarcity of microplastics mitigation strategies across different stakeholders. Lack of community involvement in microplastic monitoring or ecosystem conservation exists due to limited existence of stakeholder co-management initiatives. Although some management strategies exist for controlling the effects of microplastics (often implemented by local and global environmental groups); a standardized management strategy to mitigate microplastics in coastal areas is urgently required. There is a need to identify focal causes of microplastic pollution in the marine environment through further environmental research. This would extend to creating more effective policies as well as harmonized and extended efforts of educational campaigns and incentives for counteraction and plastic waste reduction, while mandating stringent penalties for polluting the marine environment. This will help reduce microplastic leakage into the environment.

Microscale surgery on single cells and small organisms have enabled major advances in fundamental biology and in engineering biological systems. Examples of applications range from wound healing and regeneration studies to the generation of hybridoma to produce monoclonal antibodies. Even today, these surgical operations are often performed manually, but they are labor-intensive and lack reproducibility. Microfluidics has emerged as a powerful technology to control and manipulate cells and multicellular systems at the micro- and nanoscale with high precision. Here, we review the physical and chemical mechanisms of microscale surgery, and the corresponding design principles, applications, and implementations in microfluidic systems. We consider four types of surgical operations: 1) Sectioning, which splits a biological entity into multiple parts, 2) ablation, which destroys part of an entity, 3) biopsy, which extracts materials from within a living cell, and 4) fusion, which joins multiple entities into one. For each type of surgery, we summarize the motivating applications and the microfluidic devices developed. Throughout the review, we highlight existing challenges and opportunities. We hope that this review will inspire scientists and engineers to continue to explore and improve microfluidic surgical methods.

Dynamical system tools offer a complementary approach to detailed biophysical seizure modeling, with a high potential for clinical applications. This review describes the theoretical framework that provides a basis for theorizing certain properties of seizures and for their classification according to their dynamical properties at onset and offset. We describe various modeling approaches spanning different scales, from single neurons to large-scale networks. This narrative review provides an accessible overview of this field, including non-exhaustive examples of key recent works.

To reveal rare phenotypes in bacterial populations conventional microbiology tools should be advanced to generate rapid, quantitative, accurate and high-throughput data. The main drawbacks of widely used traditional methods for antibiotic studies include low sampling rate and averaging data for population measurements. To overcome these limitations microfluidic-microscopy systems have great promise to produce quantitative single-cell data with high sampling rates. Using Mycobacterium smegmatis cells we applied both conventional assays and a microfluidic-microscopy method to reveal antibiotic-tolerance mechanisms of wild type and the msm2570::Tnmutant cells. Our results revealed that the enhanced antibiotic tolerance mechanism of the msm2570::Tn mutant was due to the low number of lysed cells during the antibiotic exposure compared with wild-type cells. This is the first study that characterized the antibiotic-tolerance phenotype of the msm2570::Tn mutant that has a transposon insertion in the msm2570 gene encoding a putative xanthine/uracil permease, which enrolls in uptake of nitrogen compound during nitrogen limitation. The experimental results indicate that the msm2570::Tn mutant can be further interrogated to reveal antibiotic killing mechanisms, in particularly, antibiotics those targets cell wall integrity.

This study investigates the hybridization scenario of a single flash geothermal power plant with a biomass driven sCO2-steam Rankine combined cycle where a solid local biomass source, olive residue, is used as a fuel. The hybrid power plant is modeled using the simulation software EB-SILON®Professional. A topping sCO2 cycle is specifically chosen for its potential for flexible elec-tricity generation. A synergy between the topping sCO2 and bottoming steam Rankine cycles is achieved by a good temperature match between the coupling heat exchanger where the waste heat from the topping cycle is utilized in the bottoming cycle. The high temperature heat addition problem common sCO2 cycles is also eliminated by utilizing the heat in the flue gas in the bottoming cycle. Combined cycle thermal efficiency and biomass to electricity conversion efficiency of 24.9% and 22.4% are achieved, respectively. The corresponding fuel consumption of the hybridized plant is found as 2.2 kg/s.

Research on piezo-composite actuators has been actively conducted over the past two decades as a response to strong demand for light, compact actuators to replace electro-magnetic motor actuators in micro robots, small flying drones, and compact missile systems. Layered piezo-composite unimorph actuators have been studied to provide active vibration control of thin-walled aerospace structures, control the shapes of aircraft wing airfoils, and control the fins of small missiles, because they require less space and provide better frequency responses than conventional electro-magnetic motor actuator systems. However, based on the limited actuation strains of conventional piezo-composite unimorph actuators with poly-crystalline piezoelectric ceramic layers, they have not been implemented effectively as actuators for small aerospace vehicles. In this study, a lightweight piezo-composite unimorph actuator (LIPCA-S2) was manufactured and analyzed to predict its flexural actuation displacement. It was found that the actuated tip displacement of a piezo-composite cantilever could be predicted accurately using the proposed prediction model based on the nonlinear properties of the piezoelectric strain coefficient and elastic modulus of a piezoelectric single crystal.

In this paper, the seven traditional models of PV modules are reviewed comprehensively to find out the appropriate model to be reliable. All the models are validated using the Matlab code and make a graphical comparison. The accuracy and convergence of each model are evaluated using data of manufactured PV panels. Then, a novel model is proposed showing its consistent performance. The most three key parameters of single-diode model are self revised to adapt to various type of PV modules. This new method is verified in three types of PV panels' data measured by National Renewable Energy Laboratory (NREL), US. The validated data show promising results when the error RMSEs' range of the proposed model is under 0.36.

An outbreak of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) occurred in China towards the end of 2019, and has spread rapidly ever since. Previous studies showed that some virus could affect the reproductive system and cause long-term complications. Recent studies exploring the source of SARS-CoV-2 using genomic sequencing have revealed that SARS-CoV-2 enters the host cells via the angiotensin-converting enzyme II (ACE2), the receptor that recognizes SARS-CoV. To investigate the expression of ACE2 and to explore the potential risk of infection in the reproductive system, we performed a thorough bioinformatic analysis on data from public databases involving RNA expression, protein expression, and single-cell RNA expression studies. The analyzed data showed high levels of ACE2 mRNA and protein expression in the testis and spermatids and equal levels of ACE2 expression in the uterus and lung. Comprehensive single-cell analysis identified ACE2 expression in the lung, testis, spermatids, and uterus. In conclusion, this study revealed the potential risk associated with the SARS-CoV-2 infection in the reproductive system and predicted that long-term complications might have a significant impact on the prevention and management of COVID-19, the disease caused upon infection with SARS-CoV-2.

A powder synthesis of PbMoO₄ from ancient lead (Pb) and deeply purified commercial MoO₃ powders was performed using a wet chemistry technique to achieve the low radioactivity scintillator for neutrinoless double beta decay search in ¹⁰⁰Mo. The synthesized powders were used to grow single crystals of PbMoO₄ by a Czochralski technique in Ar environment. The luminescence and scintillation properties were measured with excitations using UV, X- and γ-rays in temperature range of 10-300 K. Annealing of the grown PMO crystal in air atmosphere enhanced the scintillation light yield by ~3 orders of magnitude compared to that measured before annealing. The scintillation light yield of grown PMO crystal at 10 K is found to be 127% to that of a reference PMO crystal under 662 keV γ-rays excitation from a ¹³⁷Cs source. The background measurement of the grown crystal performed at 50 K shows negligible activity from ²¹⁰Pb compared to that of reference PMO crystal. These preliminary performances show that the PMO crystal grown from ancient Pb and deeply purified MoO₃ powders has the great potential to be used as cryogenic scintillator for the neutrinoless double beta decay search in ¹⁰⁰Mo.

The oncologic merits of laparoscopic technique for colorectal cancer surgery remain debatable. Eligible patients with non-metastatic colorectal cancer who were scheduled for an elective resection by only one surgeon in a medical institution were randomized to either laparoscopic or open treatment. During this period, total 188 patients received laparoscopic surgery and other 163 patients to open approach. The primary endpoint was cancer-free 5-year survival after operative treatment and secondary endpoint was the tumor recurrence incidence. We found there was no statistically significant difference between open and laparoscopic groups regarding average number of lymph nodes dissected, overall mortality rate, cancer recurrence rate or cancer-free 5-year survival. Nevertheless, laparoscopic approach was more effective for colorectal cancer treatment with shorter hospital stay and less blood loss despite operation time was significantly longer. Meanwhile fewer patients receiving laparoscopic approach developed postoperative urinary tract infection, wound infection, pneumonia or anastomosis leakage, which reached statistical significance. For non-metastatic colorectal cancer patients, laparoscopic surgery resulted in better short-term outcomes whether in total complications and intra-operative blood loss. Though there was no significant statistical difference in terms of cancer-free 5-year survival and tumor recurrence, we favor patients receiving laparoscopic surgery if not contraindicated.

Sustainable consumption became the community’s attention as the respond of worrying consumption growth direction that tends to excessively exploit nature without considering the continuity of the next generation. Take into account the growing coffee consumption in Indonesia, this article tries to prove whether the connoisseur consumers (CCs) are capable to mediate dynamics capabilities (DCs) of single origin coffee shops (SOCSs) and to encourage the consumption sustainability. In-depth interview to 30 SOCS managers, 60 baristas and 450 consumers, it is found that CCs are capable of supporting the business continuity of SOCSs because they are loyal consumers with the contribution of more than 20% from the total consumers. Correlation testing between connoisseurs’ attributes and the number of visits also shows positive value. It means there is a significant relationship. In addition, related to the sustainability attribute, the existence of CCs has encouraged the practice of consumption sustainability. At the same time, CCs are capable to moderate SOCSs to improve sensing, seizing, and transforming shop management to put up with the competition. Based on the above findings, CCs are moderating SOCSs in improving their DCs to be more potential in improving the sustainable consumption of coffee commodity in the future.

1) Background: We tested whether AHR activation induces DNA damage, whether polymorphisms in genes related to risk of Non-Hodgkin lymphoma are associated with DNA damage, and whether the two conditions do interact with each other. 2) Methods: Our study population included 36 subjects, randomly selected among the population controls participating in a case-control study on lymphoma in Sardinia, Italy, who donated a blood sample. We investigated 47 single nucleotide polymorphisms (SNPs) previously reported to convey risk of lymphoma; the Dual-Glo® Luciferase Assay System to detect activation of the aryl hydrocarbon receptor (AhR) by the serum of study subjects; and the COMET Assay to detect DNA damage. 3) Results: Activation of the aryl hydrocarbon receptor did not increase DNA damage in our study population. On the other hand, the mutant allele (G) of rs1056932/BCL6 increased the occurrence of DNA damage (p = 0.045); such association was confirmed among AhR negative, but not AhR positive subjects. 4) Conclusions: We observed excess DNA damage associated with a gene polymorphism, namely rs1056932/ BCL6, previously reported in association with risk of lymphoma. No increase in DNA damage was associated with AhR activation per se, nor with the other gene polymorphisms we investigated.

The structural, electronic and magnetochemical properties of the star-shaped polyoxopalladate [Pd₁₅O₁₀(SeO₃)₁₀]¹⁰⁻ (POPd) and its lanthanide functionalized derivatives have been investigated on the basis of density functional theory followed by a ligand field analysis using the Radial Effective Charge (REC) model. Our study predicts that heteroPOPd is a robust cryptand that enforces D_5h symmetry around the encapsulated Ln³⁺ centers. This rigid coordination environment favors interesting potential magnetic behavior in the Er and Ho derivatives, which may be of interest for molecular spintronics and quantum computing applications.

Pre-existing fracture and secondary cracks in rock mass are formed by natural power, such as magma condensed to igneous rocks and tectonic movement. The orientation and inclination of these fractures obey certain laws relating to the stress, temperature, minerals, water and so on. Therefore, cracks react differently under the same external loading on the condition of various inclination, fissure apertures, stiffness and joint roughness. To simulate the crack propagation, experiments on hollow cylinder cut by one oblique interface mimicking single fracture accumulated numerous data discovering the failure criterion in accordance with the Mohr-Coulomb criterion. And theory on the Terzaghi’s effective principle take an essential role in controlling the behavior of triggering fault. This paper introduced a series of oblique plane cutting the cylinder regarded as fractures at different inclination to concentrate on how the fracture characteristics effect the stress and strain distribution inside the specimen, especially, the relationship between displacement and water head. The key point of this numerical simulation is coupling the solid phase and the fluid phase, specifically, the mechanic and seepage field. According to the statics, curves referring to deformation and water head could be described as increasing lines. Besides, simulation on coupling solid phase and fluid phase can supply crucial evaluation on activating existing fault, and thus predicting induced seismicity in reservoirs or estimating damage in shale gas exploration.