Guava is a vital fruit worldwide, especially in Pakistan, and due to its nutritional value famous in each age group. Due to a very short shelf life, the marketing and export of this fruit faced severe constraints. Therefore, in the current study, edible coating of chitosan (0, 0.5, 1.0, 1.5, and 2.0%) was evaluated on postharvest shelf life when guava fruits were stored (room temperature and 4 °C temperatures) for 12 days. The chitosan treated coating fruits have shown reduced total sugars and malondialdehyde levels compared to untreated control samples. However, a significant difference (p ≤ 0.05) in total sugar and malondialdehyde levels exists between samples stored in m compared to refrigerated temperature (4 °C). The chitosan-coated samples have shown a greater amount of vitamin C, quercetin, rutin, and total phenolic contents than control samples. However, these nutritional parameters' levels were significantly different (p ≤ 0.05) in samples stored at room than samples stored at refrigerated temperature. However, the levels of crude fiber, potassium, and sodium were found statistically nonsignificant (p ≥0.05) in control versus chitosan treated coating treatments. The findings have documented that the coatings of 1.5 and 2.0% were most effective for extension in shelf life and maintaining the nutritional attributes of guava fruit.

Ultraviolet light incident on organic material can initiate its spontaneous dissipative structuring into chromophores which can catalyze their own replication. This may have been the case for one of the most ancient of all chromophores dissipating the Archean UVC photon flux, the nucleic acids. Oligos of nucleic acids with affinity to particular amino acids which foment UVC photon dissipation would have been selected through non-equilibrium thermodynamic imperatives which favor entropy production. Indeed, we show here that those amino acids with characteristics most relevant to fomenting UVC photon dissipation are precisely those with greatest chemical affinity to their codons or anticodons. Entropy production could thus provide an explanation for the accumulation of information in nucleic acids relevant to the dissipation of the externally imposed thermodynamic potentials. The accumulation of information in this manner provides a link between evolution and entropy production.

Myalgic Encephalomyelitis/Chronic Fatigue Syndrome (ME/CFS) is an enigmatic condition characterized by exacerbation of symptoms after exertion (post-exertional malaise or “PEM”), and by fatigue whose severity and associated requirement for rest are excessive and disproportionate to the fatigue-inducing activity. There is no definitive molecular marker or known underlying pathological mechanism for the condition. Increasing evidence for aberrant energy metabolism suggests a role for mitochondrial dysfunction in ME/CFS. Our objective was therefore to measure mitochondrial function and cellular stress sensing in actively metabolising patient blood cells. We immortalized lymphoblasts isolated from 51 ME/CFS patients diagnosed according to the Canadian Consensus Criteria and an age- and gender-matched control group. Parameters of mitochondrial function and energy stress sensing were assessed by Seahorse extracellular flux analysis, proteomics, and an array of additional biochemical assays. As a proportion of the basal oxygen consumption rate (OCR), the rate of ATP synthesis by Complex V was significantly reduced in ME/CFS lymphoblasts, while significant elevations were observed in Complex I OCR, maximum OCR, spare respiratory capacity, nonmitochondrial OCR and “proton leak” as a proportion of the basal OCR. This was accompanied by a reduction of mitochondrial membrane potential, chronically hyperactivated TOR Complex I stress signalling and upregulated expression of mitochondrial respiratory complexes, fatty acid transporters and enzymes of the β-oxidation and TCA cycles. By contrast, mitochondrial mass and genome copy number, as well as glycolytic rates and steady state ATP levels were unchanged. Our results suggest a model in which ME/CFS lymphoblasts have a Complex V defect accompanied by compensatory upregulation of their respiratory capacity that includes the mitochondrial respiratory complexes, membrane transporters and enzymes involved in fatty acid β-oxidation. This homeostatically returns ATP synthesis and steady state levels to “normal” in the resting cells, but may leave them unable to adequately respond to acute increases in energy demand as the relevant homeostatic pathways are already activated.

Background: Low-level physical activity (PA) among Chronic Low Back Pain (cLBP) is associated with various biopsychosocial factors. This research aimed to study the predictors of PA behavior among cLBP patients. Methods: In the present study 300 eligible patients with cLBP who referred to comprehensive health service centers in the Shahid Beheshti University of Medical Sciences (SBUMS) in Tehran, Iran were random selected.To diagnose the predictors of PA behavior, all the Theory of Reasoned Action (TRA) constructs were examined as risk factors to see if they influence on the probability of PA behavior occurrence and were interpreted through odds ratio (OR). SPSS version 19 was used to analyze the data. Results: Totally 280 cLBP patients with mean age of 57.07 ±13.09 years old participated in the study. This study showed that motivation to comply significant predictor the cLBP patients for subjective norm OR (%95CI): 2.095(0.116-2.792), p-value<0.001), intention was significant predictor for perform the PA behavior OR (%95CI): 1.431(0.138-1.538), p-value <0.001), behavior beliefs could predictor for attitude OR (%95CI): 1.276(0.106-1.355), p-value= 0.002). attitude, normative beliefs, subjective norm ,and evaluation outcome behavior could predictors the cLBP patients for intention to perform the PA behavior OR (%95CI): 1.188(0.032-1.312), p-value<0.001)., OR (%95CI): 1.158(0.076-2.208), p-value=0.003) ., OR (%95CI): 1.104(0.076-1.128), p-value<0.001) ., OR (%95CI): 0.814(0.301-1.440), p-value=0.007). Conclusions: This study showed that the cLBP patients who were normative beliefs and evaluation regarding PA behavior could effect on the intention to engage in greater PA than those via other constructs (attitude and subjective norm). This study showed that the cLBP patients who were normative beliefs and evaluation regarding PA behavior could effect on the intention to engage in greater PA than those via other constructs (attitude and subjective norm). This study showed that the cLBP patients who were normative beliefs and evaluation regarding PA behavior could effect on the intention to engage in greater PA than those via other constructs (attitude and subjective norm).

Material efficiency is a key element of new thinking to address the challenges of reducing impacts on the environment and of resource scarcity, whilst at the same time meeting service and functionality demands on materials. Directly related to material efficiency is the concept of the Circular Economy, which is based on the principle of optimising the utility embodied in materials and products through the life cycle. Whilst steel, as a result of high recycling rates, is one of the most ‘circular’ of all manufactured materials, significant opportunities for greater material efficiency exist, which are yet to be widely implemented. In the field of Life Cycle Management, Life Cycle Assessment (LCA) is commonly used to assess the environmental benefits of recovering and recycling materials through the manufacturing supply chain and at end-of-life. As well as containing information to calculate environmental impacts, LCA models also provide the flows of materials through the product life cycle and can also be used to quantify material efficiency and the circularity of a product system. Using an example taken from renewable energy generation, this paper explores the correlation between product circularity and the environmental case for strategies designed to improve material efficiency. An LCA-based methodology for accounting for the recovery and re-use of materials from the supply chain, and at end-of-life, is used as the basis for calculating the carbon footprint benefits of five material efficiency scenarios. Resulting carbon footprints were then compared with a number of proposed material circularity indicators. Two conclusions from this exercise were that i) LCA methodologies based around end-of-life approaches are well placed for quantifying the environmental benefits of material efficiency and circular economy strategies and ii) when applying indicators relating to the circularity of materials these should also be supported by LCA studies.

Despite the continued growth of the sport, particularly among recreational athletes, very little is known about how triathletes prepare for an event. The aim of this study was to identify the training characteristics of recreational-level triathletes and assess how their preparation for a triathlon influences their health and fatigue. During the 6 weeks prior to an Olympic distance triathlon, and the 2 weeks after the event, ten (5 males, 5 females) recreational athletes completed a daily training log to provide information on every training session. In addition, participants answered the Daily Analysis of Life Demands Questionnaire (DALDA), the Training Distress Scale (TDS), and the Alberta Swim Health Questionnaire weekly. Training loads were calculated using session-based rating of perceived exertion (sRPE) and training impulse (TRIMP). Every week of training was compared to week 1 to determine how athletes’ training and health changed throughout the study. In the 6 weeks leading up to the event, training loads, total minutes trained, and time spent in each training zone did not differ significantly. Significant reductions in training duration (Z=2.39, p=0.017, ES = 0.90), training strain (Z=2.59, p=0.009, 0.98), and number of sessions (Z=2.49, p=0.012, ES = 0.94) were seen on week 6. Training intensity distribution favored a threshold approach with athletes spending 56% of their training time at zone 1, 40% at zone 2, and 4% at zone 3. No significant changes were seen in the DALDA or TDS questionnaires. The results show that while the training intensity distribution of recreational-level triathletes does not follow a polarized model, these athletes were able to maintain their health while preparing for an Olympic distance triathlon.

The residential built form, including open space, provides the physical environment for social interaction. Understanding urban open space, including semi-public and public domains, through the lens of physical accessibility and visual permeability can potentially facilitate the building of a sense of community contributing to a better quality of life. Using an inner-city suburb in Perth, Western Australia as a case study, this research explores the importance of physical accessibility patterns and visual permeability for socialising in semi-public and public domains, such as the front yard and the residential streets. It argues that maintaining a balance between public and private inter-relationship in inner city residential neighbourhoods is important for creating and maintaining a sense of community.

Post-viral fatigue syndrome (PVFS) encompasses a wide range of complex neuroimmune disorders of unknown cause characterized by disabling post-exertional fatigue, myalgia and joint pain, cognitive impairments, unrefreshing sleep, autonomic dysfunction, and neuropsychiatric symptoms. It includes myalgic encephalomyelitis, also known as chronic fatigue syndrome (ME/CFS), fibromyalgia (FM), and more recently post-COVID-19 condition (Long COVID). To date, there are no definitive clinical case criteria and no FDA-approved pharmacological therapies for PVFS. Given the current lack of effective treatments, there is a need to develop novel therapeutic strategies for these disorders. Mitochondria, the cellular organelles responsible for tissue energy production, have recently garnered attention in research into PVFS due to their crucial role in cellular bioenergetic metabolism in these conditions. Accumulating literature has identified a link between mitochondrial dysfunction and low-grade systemic inflammation in ME/CFS, FM, and Long COVID. To address this issue, this article aimed to critically review the evidence relating to mitochondrial dysfunction in the pathogenesis of these disorders; in particular, to evaluate the effectiveness of coenzyme Q10 supplementation on chronic fatigue and pain symptoms as a novel therapeutic strategy for the treatment of PVFS.

Space missions have always assumed that the risk of spacecraft malfunction far outweighs the risk of human system failure. This assumption breaks down for longer duration exploration missions and exposes vulnerabilities in space medical system. Space agencies can no longer buy down the majority of human system risk through the crew member selection process and emergency re-supply or evacuation. No mature medical solutions exist to close the risk gap. With recent advances in biotechnology, there is promise in augmenting a space pharmacy with a biologically-based space foundry for on-demand manufacturing of high-value medical products. Here we review the challenges and opportunities of molecular pharming, the production of pharmaceuticals in plants, as the basis of a space medical foundry to close the risk gap in current space medical systems. Plants have long been considered an important life support object in space and can now also be viewed as programmable factories in space. Advances in molecular pharming-based space foundries will have widespread application in promoting simple and accessible pharmaceutical manufacturing on Earth.

Objective: To examine associations between IgA responses to Gram-negative gut-commensal bacteria and peri-menstrual symptoms and sex hormone levels during the menstrual cycle in women with and without premenstrual symptoms. Methods: Forty women aged 18-45 years completed the Daily Record of Severity of Problems (DRSP) during all 28 consecutive days of the menstrual cycle. We assayed, in plasma,, IgA responses to 6 Gram-negative bacteria, i.e. Hafnei alvei, Pseudomonas aeruginosa, Morganella morganii, Klebsiella pneumoniae, Pseudomonas putida and Citrobacter pylori, progesterone and oestradiol at days 7, 14, 21 and 28 of the menstrual cycle. Results: Significant changes in Δ (actual minus one week earlier) IgA to LPS of the 6 Gram-negative bacteria during the menstrual cycle were observed with peak IgA levels at T4 (day 28) and lows at T1 or T2 (day 7 or 14). The Δ IgA changes in H. alvei, M. Morganii, P. putida during the menstrual cycle were significantly and positively associated with changes in the total DRSP score, and severity of physio-somatic, anxiety and breast-craving, but not depressive, symptoms. The changes in IgA responses to LPS were largely predicted by changes in progesterone and steady-state levels of progesterone averaged over the luteal phase. Discussion: Menstrual cycle-associated changes in IgA directed against LPS and by inference bacterial translocation may be driven by effects of progesterone on transcellular, paracellular and vascular pathways thereby contributing to the severity of physio-somatic and anxiety symptoms as well as fatigue, breast swelling and food cravings.

Microbes have evolved many fascinating and complex ways of interacting with conspecifics. Perhaps one of the most interesting is aggregative multicellularity, wherein independent cells come together and adhere to one another in order to form a larger entity. The fundamental benefits of active aggregation into multicellular groups generally remain unclear, and there are many open questions about what selective pressures led to the evolution of this behavior in various eukaryotic and prokaryotic taxa, most notably the dictyostelids and the myxobacteria. Aggregative multicellularity can be partitioned into three main phases: coming together, staying together as a group, and disaggregation. Different selective pressures may have led to adaptations unique to each phase. While aggregative microbial systems generally form elevated multicellular structures such as fruiting bodies, these can vary in complexity and morphology even among closely related species. What evolutionary forces shaped such morphological diversification remains unknown. Strains that are not genetically identical can coaggregate, which can impact group-level function either positively through functional synergy or negatively through harmful exploitation. Such chimerism within aggregates is likely to have played important roles in shaping the evolution of microbial multicellularity. Much further research is needed into the evolutionary forces and processes leading to and shaping the many forms of microbial aggregation.

The transportation sector significantly contributes to greenhouse gas emissions, thus imposing sig-nificant environmental hazards. In response, many nations have begun promoting Electric Vehicles (EVs) as an ecologically sustainable substitute for traditional combustion vehicles. Lithium-Ion Batteries (LIBs), characterized by their high energy density, extended lifespan, and relatively low self-discharge rate, have become the suitable energy storage system for EVs, advancing the field of sustainable transportation. The decreasing cost of LIB production has primarily driven this progression, realized through a combination of economies of scale, advancements in electrode materials and cell design, and re-finements in manufacturing processes. All these elements collectively contribute to the cost reduc-tion of LIBs. A foreseeable implication of this trend is an expected surge in LIBs that will exhaust their operational lifespan and, consequently, be cast away into the environment. One mitigating strategy for this impending environmental issue involves collecting these spent EV batteries, re-configuring them, and repurposing them for applications with less rigorous weight, performance, and size prerequisites. This approach would not only prolong the utility life of the batteries but also ameliorate their environmental impacts. Nevertheless, second-life batteries are anticipated to exhibit a higher rate of gas evolution, necessitating comprehensive testing and readjustments to ensure safe operation in secondary ap-plications. The regulatory framework encompassing the second-life battery sector still needs to be defined regarding norms, technical standards, and legislation. This paper aims to elucidate the primary regulations and technical standards proposed thus far in the second-life battery marketplace. The results underscore the exigency for neutral evaluative entities, such as universities, research centers, and governmental institutions, to perform an unbi-ased assessment of the second-life battery market. This would pave the way for novel technical standards and legislative measures specifically tailored to this emerging sector.

Gout is the most common form of inflammatory arthritis. Hyperuricaemia is the pre-requisite for gout and is influenced by variable modifiable and non-modifiable risk factors. Clinical features unique for gout are due to deposition of monosodium urate (MSU) crystal in articular and extra articular tissues. Among various treating agents, anti-inflammatory drugs and urate lowering therapies (ULT) are used widely and successfully, however, non-medicinal means are also effective in the disorder. In their updated guidelines, ACR (2012) and EULAR (2016) recommended both medicinal and non-medicinal approaches that could be used in treating gout, though some of the recommendations are based on lower level of evidence. Moreover, researchers’ continued effort in finding new gout managing agents appear promising, for example, role of Lesinurad in gout management (CLEAR1, CLEAR2). In this new synthesis the author is aimed to provide updated information on gout management based on a systematic review including published work within last ten years between 2008 and 2018 and for this purpose, using ‘clinical trials in gout management’ string, published worked searched in PubMed database from 1st September 2018 to 30 October 2018. Besides the recent ACR and EULAR evidence based management guidelines, the author reviewed another 91 (total 93) articles to make this new draft – 39 articles describe role of pharmacological agents and 54 describe different gout risks, pharmacokinetics/pharmacodynamics of ULT, association between raised sUA level and renal impairment, efficacy of non-pharmacological agents in reducing sUA. According to published work, anti-inflammatory agent is the most appropriate drug group in mitigating inflammatory symptoms of gout, though they often adversely affect over other vital 2 organs with impaired function. Besides ULT, uricase analogues are also found useful in non refractory gout. Since anti-inflammatory agents and ULT contraindicate in some clinical conditions, intra-articular steroid and or adrenocorticotropic hormone (ACTH) are appropriate alternatives instead. However, head-to-head comparison between different NSAIDs, NSAID and prednisolone, NSAID and colchicine are yet to perform. Use of combined anti-inflammatory preparations in gout is also based on lower level of evidence. Regarding effective maximum dose and long-standing impact of ULT on vital organs we are yet to reach a conclusion. Likewise, non-medicinal approaches are widely using in achieving target sUA level, though some of them are based on biased study outcomes and or study with inadequate power, requiring further analysis. Among non-pharmacological approaches, life-style modification, restriction of purine rich diets, avoidance of gout inciting agents are important, but inconclusive. Educating patients’ about diseases, risk factors, available treatment options and side effects from them are also important in terms of achieving sUA level, nevertheless too much counseling sometimes could be worthless.

Background: Physiosomatic symptoms are an important part of schizophrenia phenomenology. The aim of this study is to examine the biomarker, neurocognitive and symptomatic correlates of physiosomatic symptoms in schizophrenia. Methods: We recruited 115 schizophrenia patients and 43 healthy controls and measured the Fibromyalgia and Chronic Fatigue Syndrome Rating (FF) scale, schizophrenia symptom dimensions, and the Brief Assessment of Cognition in Schizophrenia. We measured neuro-immune markers including plasma CCL11 (eotaxin), interleukin-(IL)-6, IL-10, Dickkopf protein 1 (DKK1), high mobility group box 1 protein (HMGB1) and endogenous opioid system (EOS) markers including κ-opioid receptor (KOR), µ-opioid receptor (MOR), endomorphin-2 (EM2) and β-endorphin. Results: Patients with an increased FF score display increased ratings of psychosis, hostility, excitement, formal though disorders, psychomotor retardation and negative symptoms as compared with patients with lower FF scores. A large part of the variance in the FF score (55.1%) is explained by the regression on digit sequencing task, token motor task, list learning, IL-10, age (all inversely) and IL-6 (positively). Neural network analysis shows that the top-6 predictors of the FF score are (in descending order): IL-6, HMGB1, education, MOR, KOR and IL-10. We found that 45.1% of the variance in a latent vector extracted from cognitive test scores, schizophrenia symptoms and the FF score was explained by HMGB-1, MOR, EM2, DKK1, and CCL11. Conclusions: FF symptoms are an integral part of the phenome of schizophrenia. Neurotoxic immune and neurodegenerative pathways and to a lesser extent the EOS appear to drive FF symptoms in schizophrenia.

Gender parity, is an important standard to be achieved by a society in which men and women are treated equally. The distinctions in the treatment may arise from psychology, biology, or cultural norms constructed by society. Studies show the different experiences of genders across many areas including health, education, personality, life expectancy, sports, interests, political empowerment, and careers. However, we are still far from reaching the objective, because there are conducts such as gender discrimination and expressions such as the purplewashing. In relation to feminism, purplewashing is used to define a diversity of marketing and political strategies intended at promoting people, companies, associations, and other organizations through an appeal to gender equality: they use only some of the feminist values at their convenience and in its actions, they are not really supportive of gender equality. In this opinion we aimed to address some of the reasons for inequality of opportunities based on gender; purplewashing is described as an expression that takes away the visibility of women's struggle. Additionally, we touch on some actions that promote gender equality in the family, educational, and work environments. Global leaders have an unprecedented opportunity to build gender-sensitive societies and economies. The challenges facing women today are essentially the same as they were a long time ago. It is time to break the bias.

Abstract: The promotion of sustainable packaging is part of the European Green Deal and plays a key role in the EU’s social and political strategy. One option is the use of renewable resources and biomass waste as raw materials for polymer production. Lignocellulose biomass from annual and perennial industrial crops and agricultural residues are a major source of polysaccharides, proteins, and lignin, and can also be used to obtain plant-based extracts and essential oils. Therefore, these biomasses are considered as potential substitute for fossil-based resources. Here, the status quo of bio-based polymers is discussed and evaluated in terms of properties related to packaging applications such as gas and water vapor permeability as well as mechanical properties. So far, their practical use is still restricted due to lower performance in fundamental packaging functions that directly influence food quality and safety, the length of shelf life and thus the amount of food waste. Besides bio-based polymers, this review focuses on plant extracts as active packaging agents. Incorporating extracts of herbs, flowers, trees, and their fruits is inevitable to achieve desired material properties that are capable to prolong the food shelf life. Finally, the adoption potential of packaging based on polymers from renewable resources is discussed from a bioeconomy perspective.

This paper aims to provide an overall review of degradation, damage evolution and fatigue models in the literature of various engineering materials, mostly metals, and composites.

Semisolid casting of Aluminum alloys is growing. For magnesium alloys, Thixomoulding became the dominant process around the world. For aluminium processing, the situation is different as semisolid processing of aluminium is more technically challenging than for magnesium. Today three processes are leading the process implementation, The GISS method, the RheoMetal process and the SEED process. These processes have all strengths and weaknesses and will fit a particular range of applications. The current paper aims at looking at the strengths and weaknesses of the processes to identify product types and niche applications for each process based on current applications and development directions taken for these processes

The Covid-19 pandemic has severely tested the mental health of frontline health care workers. A repeated cross-sectional study can provide information on how their mental health evolved during the various phases of the pandemic. The intensivists of a COVID-19 hub hospital in Rome were investigated with a baseline survey during the first wave of the pandemic in April 2020 and were contacted again in December 2020, during the second wave. 152 of the 205 eligible workers responded to an online questionnaire designed to measure procedural justice, occupational stress (effort/reward imbalance), sleep quality, anxiety, depression, burnout, job satisfaction, happiness, and turnover intention. Workers reported a further increase in workload and compassion fatigue, which had already risen during the first wave, and a marked reduction in the time devoted to meditation and mental activities. A low level of confidence in the adequacy of safety procedures and the need to work in isolation, together with an increased workload and lack of time for meditation were the most significant predictors of occupational stress in a stepwise linear regression model. Occupational stress was, in turn, a significant predictor of insomnia, anxiety, low job satisfaction, burnout, and intention to leave the hospital. The number of workers manifesting symptoms of depression increased significantly to exceed 60%. Action to prevent occupational risks and enhance individual resilience cannot be postponed.

The historic view of metadata as “data about data” is expanding to include data about other items that must be created, used and understood throughout the data and project life cycles. In this context, metadata might better be defined as the structured and standard part of documentation and the metadata life cycle can be described as the metadata content that is required for documentation in each phase of the project and data life cycles. This incremental approach to metadata creation is similar to the spiral model used in software development. Each phase also has distinct users and specific questions they need answers to. In many cases, the metadata life cycle involves hierarchies where latter phases have increased numbers of items. The relationships between metadata in different phases can be captured through structure in the metadata standard or through conventions for identifiers. Metadata creation and management can be streamlined and simplified by re-using metadata across many records. Many of these ideas are being used in metadata for documenting the life cycle of research projects in the Arctic.

Viruses are the most numerically abundant biological entities on Earth. As ubiquitous replicators of information molecules and agents of community change, viruses have potent effects on life on Earth and may play a critical role in human spaceflight missions, life detection missions to other planetary bodies, and in planetary protection. However, major knowledge gaps constrain our understanding of the Earth’s virosphere: 1) the role viruses play in biogeochemical cycles, 2) the origin(s) of viruses, and 3) the involvement of viruses in the evolution, distribution, and persistence of life. As viruses are the only replicators that span all known types of nucleic acids, an expanded experimental and theoretical toolbox built for Earth’s viruses will be pivotal for detecting and understanding life on Earth and beyond. Only by filling in these knowledge and technical gaps will we obtain an inclusive assessment of how to distinguish and detect life on other planetary surfaces. Meanwhile, space exploration requires life-support systems for the needs of humans, plants, and their microbial inhabitants. Viral effects on microbes and plants are essential for Earth’s biosphere and human health, but virus-host interactions in spaceflight are poorly understood. Viral relationships with their hosts respond to environmental changes in complex ways which are difficult to predict by extrapolating from Earth-based proxies. These relationships must therefore be studied in space to fully understand how spaceflight will modulate viral impacts on human health and life-support systems, including microbiomes. This review addresses key questions that must be examined to incorporate viruses into Earth system models, life-support systems, and life detection. Further, the results of tackling these questions will help in our efforts to develop planetary protection protocols and further our understanding of viruses in astrobiology.

Relatively little research attention has been paid to sex issues in late life suicidal behaviour. The aim was to compare clinical characteristics of women and men aged 70+ who were hospitalized after a suicide attempt. We hypothesized higher depression and anxiety scores in women, and we expected to find that men would more often attribute the attempt to health problems and compromised autonomy. Participants (56 women and 47 men, mean age 80) were interviewed by a psychologist. In addition to psychiatric and somatic health assessments, participants responded to an open-ended question concerning attributions of the attempt. There were no sex differences in depression and anxiety, but women were more likely to report that they found their situation hopeless (67.9% vs. 43.8%, p = 0.02). At least one serious physical disability was noted in 60.7% of the women and 53.2% of the men (p = 0.55). Proportions attributing their attempt to somatic illness did not differ (women, 14.5% vs. men 17.4%, p = 0.79), and similar proportions attributed the attempt to reduced autonomy (women, 21.8% vs. men, 26.1 %, p = 0.64). The unexpected lack of sex differences might be influenced by cultural context in which sex norms play a part.

This study explores individual and contextual risk factors for the onset of work interfering with private life (WIL) and private life interfering with work (LIW) among self-employed men and women across European countries. It also studies the relationship between interference (LIW and WIL) and wellbeing among self-employed men and women and the effect of macro level risk factors. Data from the fifth round of European Working Conditions Survey was utilized and a sample of self-employed men and women with active businesses was extracted. Applying multilevel regressions, results show that though business characteristics are important for level of WIL, time demand is the most evident risk factor for WIL and LIW. There is a relationship between wellbeing and WIL and LIW respectively, and time demands is the most important factor in this relationship. Gender equality on the labor market did not relate to level of interference, nor did it mediate the relationship between interference and wellbeing. However, the main and most important risk factor for experiencing WIL and LIW and for how interference relate to wellbeing is gender relation processes in work and life, both on individual and contextual level.

Immersion in forest environments was shown to produce beneficial effects to human health, in particular psychophysical relaxation, so much that this practice is increasingly recognized as a form of integrative medicine. Limited evidence exists about both statistical significance and size of the effects conditioned on personal characteristics, as well as on the main external variables. The primary purpose of this study was to substantiate the very concept of forest therapy by means of the quantification and significance of the psychological effects, stratified by gender, age groups and place of residence. A preliminary qualitative analysis of the main determinants, in particular the method of conducting, the meteorological comfort and the concentration of volatile organic compounds in the forest atmosphere, was afforded. Seven forest therapy sessions were performed in late summer though early fall, resulting in 150 psychological self-assessment questionnaires administered before and after each session. The results were comparable or even better than others reported in the international literature. Moreover, preliminary evidence arose about different functionality towards specific psychological indexes conditioned at least on gender and age groups, as well as meteorological comfort, structured programs and, possibly, volatile organic compounds showed an impact on the outcomes.

In this paper, the fatigue response of Fused Filament Fabrication (FFF) Acrylonitrile butadiene styrene (ABS) parts is studied. Different building parameters (layer height, nozzle diameter, infill density, and printing speed) were chosen to study their influence on the lifespan of cylindrical specimens according to a design of experiments (DOE) using the Taguchi methodology. The same DOE was applied on two different specimen sets using two different infill patterns: rectilinear and honeycomb. The results show that infill density is the most important parameter for both studied patterns. The specimens manufactured with the honeycomb pattern show longer lifespans. The best parameter set associated to that infill was chosen for a second experimental phase, in which the specimens were tested under different maximum bending stresses to construct the Wöhler curve associated to this 3D printing configuration. The results of this study are useful to design and manufacture ABS end-use parts that are expected to work under oscillating periodic loads.

We present an ontology log-OLOG- representation of the classical Miller-Urey experiment, usually considered as a paradigm for spontaneous generation of biomolecules on the prebiotic Earth and also, as a key in understanding the chemical evolution phenomena linked to the origins of life. Ologging The Miler-Urey experiment enables us, through the categorical notion of fibre product or pullback, to define the concept of Biogenic Space, as a space containing low complexity biogenic units subjected to appropriate physical and chemical conditions, facilitating the synthesis of highly complex organic molecules. Also, we characterize the Biogenic Space as a concrete universal object that could be associated with the preconditions for life inside various structures in the universe such as exoplanets and exomoons located in habitable zones, but also in interstellar and intergalactic organic clouds.

This paper presents the life cycle assessment results of a study of plastic recycling via hydrothermal upgrading (HTU), a chemical recycling technology. It was investigated due to its potential to address current gaps in the plastic recycling system, largely due to several plastic packaging materials and formats that cannot be processed by traditional mechanical recycling technologies (primarily due to technoeconomic reasons). As society transitions towards a net-zero-based circular economy, assessments should be conducted with a futuristic outlook, preventing costly mistakes by employing the right technologies in the right areas. HTU can generate up to 76% reduction in climate change impacts when compared with comparable end-of-life treatment technologies whilst conserving material with the system. Additionally, further reductions could be achieved by changes in electricity consumption within the study. This represents a new insight to chemical recycling of polymers by establishing a prospective life cycle assessment study that looks to introduce a step-change in the recycling system. By creating a transparent cut-off model with consistent allocation, it highlights the benefits of introducing this technology as opposed to the current model of disposal through incineration or landfill.

Estimating the remaining useful life (RUL) of components is a crucial task to enhance the reliability, safety, productivity, and to reduce maintenance cost. In general, predicting the RUL of a component includes constructing a health indicator ( ) to infer the current condition of the component, and modelling the degradation process, to estimate the future behavior. Although many signal processing and data-driven based methods were proposed to construct the , most of the existing methods are based on manual feature extraction techniques, and need the prior knowledge of experts, or rely on a large amount of failure data. Therefore, in this study, a new data-driven method based on the convolutional autoencoder (CAE) is presented to construct the . For this purpose, the continuous wavelet transform (CWT) technique is used to convert the raw acquired vibrational signals into a two-dimensional image; then, the CAE model is trained by the healthy operation dataset. Finally, the Mahalanobis Distance (MD) between the healthy and failure stages is measured as the . The proposed method is tested on a benchmark bearing dataset and compared with several other traditional construction models. Experimental results indicate that the constructed exhibits a monotonically increasing degradation trend and has a good performance to detect incipient faults.

Main purposes and research question: Wheat is the second largest grain crop by tonnage in the world and the largest in Denmark. Given the observed, adverse impacts on wheat yields of climate change and the importance of wheat in the human diet, the purpose of this study was to use life cycle assessment to compare conventional wheat farming with indoor vertical farming using hydroponics. Methods: Life Cycle Assessment was used to assess the base case systems up to the “farm gate” for 1 tonne of wheat grain. The processes contributing most of the impacts were identified, and scenarios were assessed to determine how much the impacts could be reduced. Results: The conventional system outperformed the base case vertical system in every impact category, due to the electricity consumption in the lighting system. The scenarios included increasing the efficiency of the LED lighting and using 100% wind energy, but the conventional system still outperformed the vertical system by significant margins in all impact categories. This was due to the low photosynthetic conversion efficiency and the high energy density of wheat. Conclusions: Until significant improvements are made to lighting efficiency, the photosynthesis conversion efficiency of wheat, new wheat variants designed for vertical gardens and the sustainability of electricity supply, conventional wheat production will be environmentally preferable and vertical gardens would be advised to focus on food products with low energy densities.

Many marine species use different habitats at different stages of their life cycle. Functional connectivity, the degree to which the seascape facilitates or impedes movement between habitat patches, is poorly studied in marine systems. We reviewed the scientific literature to explore the various barriers preventing functional connectivity between marine habitats and how the removal of these barriers may restore connectivity. To our knowledge, this is the first systematic review to investigate functional connectivity between life cycle habitats for a range of marine species. A total of 4,499 records were identified and screened, leaving 69 publications eligible for review. The results highlighted a range of distances between nursery and adult habitats that limited functional connectivity for a number of species, predominantly reef fishes. For some species, adults were absent on reefs >9km from the closest nursery habitat, suggesting a threshold for connectivity. Similarly, increased distance between spawning and settlement habitats decreased settling success of larvae of various taxa. Pelagic larval duration, seascape topography and climate change were also shown to impact functional connectivity during the larval phase. The removal and mitigation of barriers preventing functional connectivity, including dams and habitat fragmentation, restored connectivity between disconnected life cycle habitats, but the efficacy of these approaches differed between species and studies. The results of this review deepen our understanding of marine functional connectivity between life cycle habitats via larval, juvenile, and adult dispersal. These findings have implications for the design and management of marine reserve networks.

The fatigue life of welded joints under cyclic loading is a complex process that can be roughly divided into fatigue crack initiation, crack propagation and final fracture. Usually, these phases are evaluated separately. Several methods are available to estimate the extent of the different phases in welded components, such as stress-based fatigue concepts for crack initiation or linear elastic fracture mechanics for crack propagation; however, distinguishing these phases in welded components is a complex procedure and often relies on assumptions such as transition crack sizes. The objective of this study is to investigate the relationship between fatigue crack initiation and propagation in welded joints using artificially notched specimens with welded joints characteristics of different notch acuity (different radii and opening angle). The experiments show that the investigated relationship basically depends on the notch acuity, the load level and the stress ratio.

The present paper reviews evidence for ecological evolution of Montiaceae. Montiaceae (Portulacineae) comprise a family of ca. 275 species and ca. 25 subspecific taxa of flowering plants distributed mainly in extreme western America, with additional endemism elsewhere, including other continents and islands. They have diversified repeatedly across steep ecological gradients. Based on narrative analysis, I argue that phylogenetic transitions from annual to perennial life history have been more frequent than suggested by computational phylogenetic reconstructions. I suggest that a reported phylogenetic correlation between the evolution of life history and temperature niche is coincidental and not causal. I demonstrate how statistical phylogenetic comparative analysis (PhCA) missed evidence for marked moisture niche diversification among Montiaceae. I discount PhCA evidence for the relation between Montiaceae genome duplication and ecological diversification. Based on the present analysis of Montiaceae evolution, I criticize the premise of the prevalent statistical approach to PhCA, which tests Darwinian deterministic hypotheses against stochastic evolutionary null models. I discuss theoretical/empirical evidence that evolution is neither stochastic, nor Darwinistically-determined, but idiosyncratic. Idiosyncraticity describes the outcome of a stochastically perturbed nonlinear chaos-like process. The Principle of Evolutionary Idiosyncraticity (PEI) is based on the evolutionary theory of Natural Drift, which maintains that determinism in evolution is a property of the organism and not, as maintained by the theory of Natural Selection, its traits or its milieu. This determinism is characteristic of chaotic functions, which are absolutely determinate, generate self-similarity, but remain absolutely unpredictable. PEI explains precisely observations that evolution proceeds not linearly, but chaotically, producing both quasi-linear fractal-like patterns and non-linear jumps. PEI has ramifications for all areas of macroevolutionary research. In particular, it demonstrates both the fallacy and futility of the statistical PhCA approach that interprets evolutionary causes in terms of evolutionary correlations. However, statistical methods of PhCA can be applied heuristically and fruitfully to reveal idiosyncraticity and discover evolutionary novelty. This, in turn, is demonstrated by the emergence of statistical anomalies in evolutionary analyses of Montiaceae.

Adolescents’ daily life has dramatically changed during the COVID-19 era due to the social restrictions that have been imposed, including closures of schools, leisure centers and sport facilities. The purpose of this study was to examine levels of well-being and mood and their relations with physical (in)-activity and eating behaviors in adolescents during a lockdown period in Greece. A total of 950 adolescents (Mean Age = 14.41years ± 1.63) participated in a web-based survey while education was online and organized sport activities were interrupted. Participants showed poor well-being, insufficient physical activity levels and moderate scores of healthy eating behavior. Hierarchical regression analysis showed that, after controlling for the effect of gender and body mass index, increased physical activity and healthier eating behavior predicted better well-being, whereas sedentariness predicted worse well-being. Furthermore, it was revealed that days of physical activity per week was a stronger predictor of well-being than minutes of physical activity per week, and that both in-house and out-of-house physical activity were beneficial. Considering that well-being was below the threshold recommended by the WHO as indicative of possible depressive symptoms, measures to increase physical activity and improve eating behavior should become a priority for communities and policy makers.

What if oxygenic photosynthesis is a primordial process with roots at the origin of life? What would the impact of this change in perspective be on our understanding of the early Earth and of the emergence and diversification of life? In here, I will examine some of the historical context of the study of the evolution of photosynthesis, which led to the consolidation of the current notion that the origin of anoxygenic photosynthesis occurred before the origin of oxygenic photosynthesis. I will show with a few examples how the mainstream view on the evolution of photosynthesis traces back to Oparin’s ‘primordial soup’ scenario for the origin of life, fuelled by the century-old perception that oxygenic photosynthesis is a plant rather than a bacterial trait. However, it has become more evident than ever before that the mainstream view is not supported by the evolution of the photosystems. In other words, the origin of biological water oxidation appears to be the seed from where photosynthesis sprout. Somewhat troubling and contrary to all predictions that derive from the mainstream view, photosystem II—the water-splitting and oxygen-evolving enzyme—shows features that are better explained if photochemical reaction centres originated during the establishment of oxygenic photosynthesis. An urgent revision of the evolution of photosynthesis procured to be free from biases of interpretations and presuppositions is strongly encouraged from all angles of the Life and Earth Sciences.

Mobile elevating work platforms (MEWPs) consist of a work platform, extending structure, and chassis, and are used to move persons to working positions. MEWPs are useful but are composed of pieces of equipment, and accidents do occur owing to equipment defects. Among these defects, accidents caused by the fracture of bolts fixed to the extension structure and swing system are increasing. This paper presents a failure analysis of the fixing bolts of MEWP. Standard procedure for failure analysis was employed in this investigation. Visual inspection, chemical analysis, tensile strength measurement, and finite element analysis (FEA) were used to analyze the failure of the fixing bolts. Using this failure analysis approach, we found the root cause of failure and proposed a means for solving this type of failure in the future. First, the chemical composition of the fixing bolt is obtained by a spectroscopy chemical analysis method, which determined that the chemical composition matched the required standard. The tensile test showed that the tensile and yield strengths were within the required capacity. The stress analysis was carried out at five different boom angles, and it was determined that the fixing bolt of MEWP can withstand the loads at all the boom angles. The outcomes of the fatigue analysis revealed that the fixing bolt fails before reaching the design requirements. The results of the fatigue analysis showed primarily that the failure of the fixing bolt was due to fatigue. A visual inspection of the fractured section of the fixing bolt also confirmed the fatigue failure. We propose a method to prevent failure of the fixing bolt of the MEWP from four different standpoints: the manufacturer, safety certification authority, safety inspection agency, and owner.

Shape memory alloys (SMAs) are increasingly used in the fields of aviation, automotive and biomedicine due to their unique properties. Nickel-Titanium (NiTi) alloy materials, which are one of the shape memory alloys, are among the most frequently used alloy materials. The shape memory and super elastic effects of NiTi alloys, high ductility and deformation hardening make it difficult to shape burr. An additional problem is the formation of a white layer during machining. In this study, surface milling operations were performed in dry cutting conditions with uncoated cutting tools with different nose radii. The processing parameters were determined based on the experience gained as a result of the preliminary tests. Tungsten carbide cutting tools with different nose radii (0.4mm and 0.8mm) were used for the milling operations. Milling was carried out at three different cutting speeds (20, 35, 50 m/min), feed rates (0.03, 0.07, 0.14 mm/tooth), and a constant axial cutting depth (0.7 mm). As a result of our experimental studies, the best tool life was found to be in 0.8 mm nose radius cutting tools at 20 m/min cutting speed and 0.03 mm/tooth feed rate (0.264 mm). The minimum average surface roughness was found after milling with 0.8 mm nose radius cutting tool at 20 m/min cutting speed and 0.03 mm/tooth feed rate (0.346 μm). It has been determined that increasing the cutting tool nose radius reduces both the flank wear over the cutting tool and the average surface roughness.

Based on a new model of a possible origin of life, we establish an efficient and stable system undergoing structural reproduction, self-optimization and molecular evolution. This system is being formed under realistic conditions by the interaction of two cyclic processes, one of which offering vesicles as the structural environment, the other supplying peptides from a variety of amino acids as versatile building blocks. We demonstrate that structures growing in a combination of both cycles have the potential to support their own existence, to undergo chemical and structural evolution and to develop unpredicted functional properties. The key mechanism is the mutual stabilization of the peptides by the vesicles and of the vesicles by the peptides together with a constant production and selection of both. The development of the proposed system over time not only would represent one of the principles of life, but could also be a model for the formation of self-evolving structures ultimately leading to the first living cell. The experiment yields clear evidence on a vesicle-induced accumulation of membrane-interacting peptide which could be identified by liquid chromatography combined with high-resolution mass spectroscopy. We found that the selected peptide has an immediate effect on the vesicles, leading to i) reduced vesicle size, ii) increased vesicle membrane permeability, and iii) improved thermal vesicle stability.

A Life Cycle Analysis was performed considering three existing power plants of comparable size operating with different sources of renewable energy: geothermal, solar and wind. Primary data were used for building the life cycle inventories. The geothermal power plant includes emissions treatment for removal of hydrogen sulfide and mercury. The scenario about the substitution of natural emissions from geothermal energy, with specific reference to the greenhouse effect, is also investigated performing a sensitivity analysis. The results are characterized employing a wide portfolio of environmental indicators employing the Recipe 2016 and the ILCD 2011 Midpoint+ methods; normalization and weighting are also applied using the Recipe 2016 method at endpoint level. The results demonstrate a good eco-profile of geothermal power plant with respect to other renewable energy systems and allow for a critical analysis to support potential improvements of the environmental performances.

The aim of this paper is to analyze and evaluate Renewable Energy Sources (RES) usage and their contribution to citizens’ life quality. For this purpose, a survey was conducted, using a sample of 400 residents in an urban area of Attica region in Greece. The methods of Principal Components Analysis and Logit Regression were used on a dataset containing respondents’ views on various aspects of RES. Two statistical models were constructed for the identification of the main variables that are associated with RES’ usage and respondents’ opinion on their contribution to life quality. The conclusions that can be drawn show that the respondents are adequately informed about some of the RES’ types while most of them use at least one of the examined types of RES. The benefits that RES offer, were the most crucial variable in determining both respondents’ perceptions on their usage and on their contribution to life quality.

The demands for high power and low emissions put focus on energy efficiency when developing new engines. An important part is the UAV engine cooling system, which cools the engine structure below damaging temperatures. For high temperatures in the cooling system there is a risk that boiling occurs and while the initial nucleate boiling enhances the cooling effect, the subsequent Film boiling decreases the heat transfer drastically. It is important to understand the benefits and limitations of various fluids when designing a two-phase cooling system. This paper proposes an alternative organic coolant. Its normal application range is 15°C to 400°C, and its pressure range is from atmospheric to 10.6 bar. DOWTHERM A fluid possesses unsurpassed thermal stability at temperatures of 400°C. This fluid, in both the liquid and vapor form, is noncorrosive toward common metals and alloys. Even at the high temperatures involved, the equipment usually exhibits excellent service life. Original equipment in many systems is still being used after 30 years of continuous service. The numerical results, described in this paper, show the potential of DOWTHERM A as a good alternative for cooling a UAV engine. It will extend the working temperature range of the Diesel engine and will maintain the structural integrity of the piston, cylinder and the piston rings.

Plasma treatment of soft polymers is the promising technique to improve biomedical properties. The response to the deformation of such materials is not yet clear. Soft elastic polyurethane treated with plasma immersion ion implantation is subjected to fatigue uniaxial loading (50000 cycles, frequency – 1 Hz, strain amplitude – 10, 20, 40%). The influence of the strain amplitude and the plasma treatment regime on damage character is discussed. Surface defects are studied in unloaded and stretched states of the material. As a result of fatigue loading, transverse cracks (with closed overlapping edges as well as with open edges deeply propagating into the polymer) and longitudinal folds which are break and bend inward, appear on the surface. Hard edges of cracks cut the soft polymer which is squeezed from the bulk to the surface.

Background: This study investigated the prevalence of worsening problems using Post Stroke Checklist (PSC) at 3, 6, and 12 months post-stroke and their associations with health-related quality of life. Methods: In stroke patients admitted between June 2014 and December 2015, PSC and EuroQol-5Dthree level (EQ-5D-3L) were assessed at post-stroke 3 (n=181), 6 (n=175), and 12months (n=89). The prevalence of worsening problems and its association withEQ-5D-3L at post-stroke 3 and 6months were analyzed. Results: An average of 0.59 (range 0–12), 1.47 (range 0–12), and 1.00 (range 0–10) worsening problems per patient was identified at 3, 6, and 12months after stroke, respectively. The most frequently and continuously identified worsening problems were mood disturbances (reported by 8.8%, 16.0% and13.5% of patients at 3, 6, and 12 months post-stroke, respectively). Worsening mobility was significantly associated with worse EQ-5D index at post-stroke 3 months (β,-0.583; 95% CI, -1.045 to -0.120). The worsening of mobility and communication was significantly associated with worse EQ-5D index at post-stroke 6 months (mobility: β,-0.170; 95% CI, -0.305 to -0.034, communication: β,-0.164; 95% CI, -0.309 to -0.020). Conclusions: PSC may be useful for the detection of various subjective worsening problems during serial clinical follow-up after stroke. Appropriate rehabilitation and management strategy to solve the identified problems could improve the quality of life in stroke survivors.

The Life Cycle Analysis (LCA) was used to assess the impact of biomethane plant of the “La Católica” in Pedregal-Majes-Arequipa farm, fed with cow manure and holding a production of 60 Nm3/day of purified biogas. Life cycle inventory, impact assessment and interpretation were performed. The functional unit established was 1 MJ of energy produced; the study was modeled with SimaPro software, Ecoinvent Database and ReCiPe Midpoint (H) impact assessment methodology, according to the impact categories of climate change and fossil resource depletion. The impact analysis was limited to the Well to Tank (WTT) approach, which involves feedstock transport, substrate mixed, anaerobic digestion, biogas purification, storage and injection of the fuel into transport vehicles. The digestion process generated the highest amount of CO2 emissions (1.79E-02 kg CO2 eq/MJ-biomethane) and the highest depletion of fossil resources (6.58E-03 kg oil eq/MJ-biomethane), compared to the other fuel production, due to energy consumption and transport infrastructure. Biomethane was then compared to fossil fuels, resulting in natural gas generating the least amount of CO2 emissions, followed by diesel and finally biomethane. For the fossil resource depletion category, biomethane presented the lowest amount of fossil fuel consumption (1.37E-02 kg oil eq/MJ-biomethane), followed by natural gas and diesel.

Background: Gluten neuropathy (GN) is defined as an otherwise idiopathic peripheral neuropathy in the presence of serological evidence of gluten sensitivity (positive antigliadin and/or transglutaminase or endomysium antibodies). We aimed to compare the quality of life (QoL) of GN patients with control subjects and to investigate the effect of a gluten free diet (GFD) on the QoL. Methods: All consecutive patients with GN attending a specialist neuropathy clinic were invited to participate. Overall Neuropathy Limitations Scale (ONLS) was used to assess the severity of neuropathy. The SF-36 questionnaire was used to measure participants’ QoL. A strict GFD was defined as effectively been able to eliminate all circulating gluten sensitivity-related antibodies whilst on the diet. Results: Fifty-three patients with GN and 53 age and gender matched controls were recruited. Compared to controls, GN showed significantly worse scores in physical functioning, role limitations due to physical health, energy/fatigue and general health subdomains of SF-36. After having adjusted for age, gender and disease severity, being on a strict GFD correlated with better SF-36 scores on the pain domain of the SF-36 (beta 0.317, p=0.019) and the overall health change domain of the SF-36 (beta 0.306, p=0.017). Conclusion: In GN physical dysfunctioning is the major determinant of poor QoL compared to controls. Routine checking for elimination of gluten sensitivity-related antibodies that results from a strict GFD should be encouraged as such elimination ameliorates the overall pain and health scores, indicating better QoL.

This paper reassesses the detrimental effect on fatigue performance due to thicker sections based on extensive fatigue strength test database, taken from research program worldwide over the past half of a century in offshore oil &amp; gas and renewable industry. The data entries in the database have been evaluated to ensure its data integrity. Statistical analyses on these S-N data are performed with or without the thickness correction at different exposure level to corrosive environment, in order to re-evaluate the suitability of current standards in regard to the thickness effect. The study has concentrated on T-joint, transverse butt welded joint and tubular joint as these are the most commonly used joint types in the offshore wind industry. The analysis indicates general agreement of fatigue strength with the thickness effects in current standard for in air conditions but great conservatism for corrosive environment.

Although Support Vector Machines (SVM) are widely used for classifying human motion patterns, their application in the automatic recognition of dynamic and static activities of daily life in the healthy older adults is limited. Using a body mounted wireless inertial measurement unit (IMU), this paper explores the use of SVM approach for classifying dynamic (walking) and static (sitting, standing and lying) activities of the older adults. Specifically, data formatting and feature extraction methods associated with IMU signals are discussed. To evaluate the performance of the SVM algorithm, the effects of two parameters involved in SVM algorithm—the soft margin constant C and the kernel function parameter $\mathsf{\gamma }$—are investigated. The changes associated with adding white-noise and pink-noise on these two parameters along with adding different sources of movement variations (i.e., localized muscle fatigue and mixed activities) are further discussed. The results indicate that the SVM algorithm is capable of keeping high overall accuracy by adjusting the two parameters for dynamic as well as static activities, and may be applied as a tool for automatically identifying dynamic and static activities of daily life in the older adults.

NASA mission systems proposals are often compared using an equivalent system mass (ESM) framework wherein all elements of technology to deliver an effect- its components, operations and logistics of delivery- are converted to effective masses since this has a known cost scale in space operations. To date, ESM methods and the tools for system comparison have not considered complexities wherein systems that serve a mission span multiple transit and operations stages, such as would be required to support a crewed mission to Mars, and thus do not account for the different mass equivalency factors operational during each period and the inter-dependencies of the costs across the mission. Further, ESM does not account well for the differential reliabilities of the underlying technologies. Less reliability should incur an equivalent mass cost for technologies that might otherwise provide a mass advantage. We introduce an extensions to ESM to address these limitations and show that it provides a direct method for analyzing, optimizing and comparing different mission systems. We demonstrate our extended ESM (xESM) calculation with crop production technologies -- an aspect of the developing offworld biomanufacturing suite -- since it represents a case with strong coupling among stages of the mission and a relatively high-risk profile.

Chronic fatigue and fibromyalgia symptoms frequently occur in major depressive disorder (MDD). The pathophysiology of these symptoms may in part, be ascribed to activated immune pathways, although it is unclear whether muscular factors play a role in their onset. The aim of the present study is to examine the role of muscle proteins in major depression in association with symptoms of chronic fatigue and fibromyalgia. We measured serum levels of agrin, talin-2, titin, and creatine phosphokinase (CPK) as well as the FibroFatigue (FF), the Hamilton Depression Rating Scale (HAM-D) and the Beck Depression Inventory (BDI-II) in 60 MDD patients and 30 healthy controls. The results show a significant increase in agrin and talin-2 in MDD patients as compared with controls. There were highly significant correlations between agrin and HAM-D, BDI-II and FF scores. Agrin, but not talin or titin, was significantly and positively associated with all 12 items of the FF scale. We found that a large part of the variance in HAM-D (47.4%), BDI-II (43.4%) and FF (43.5%) scores was explained by the regression on agrin, smoking, female sex (positively associated) and education (inversely associated). CPK was significantly and inversely associated with the total FF score and with muscle and gastro-intestinal symptoms, fatigue, a flu-like malaise, headache and memory, autonomic and sleep disturbances. These results suggest that aberrations in neuromuscular (NMJs) and myotendinous junctions may play a role in MDD and that the aberrations in NMJs coupled with lowered CPK may play a role in symptoms of chronic fatigue and fibromyalgia in MDD. Moreover, the increase of agrin in MDD probably functions as part of the compensatory immune-regulatory system (CIRS).

The diversification of life-histories is mediated by cooperation, innovations of biological information, modularity, and heterochrony in developmental processes. These processes are defined, contextualized, and exemplified, studying the evolution of coloniality (i.e. life-history involving modularization of the multicellular individual) in the family of benthic tunicates Styelidae. This study proposes that in these colonial tunicates there is an inter-generational division of labor, where one generation is feeding, a second is developing by morphogenetic processes, and a third is aging by programmed cell death and phagocytosis. The communication system developed in these colonies is mediated, by changes in proportion, location, and gene expression of specialized blood cells. Colonial life-history in animals is related to the reduction of individual size; development of extra-corporeal tissues to interconnect zooids; the inter-generational division of labor; and the reduction of zooid’s individuality. Processes analogous with the widely accepted major evolutionary transitions (METs), suggesting that coloniality could be studied as a MET. The understanding of colonial life-histories could provide information about key mechanisms for life diversification.

What proportions should a thermally massive building have? How should the thermal mass be distributed? Should the "massing" change with the choice of material? This paper shows how to optimize the physical proportions of a building so that it synchronizes ambient heat exchanges in a natural feedback cycle. The internal mass is thermally coupled with buoyancy ventilation; the cycle is driven by the daily swing of outdoor temperature. Tripling up functions in this way—so that structural materials can reliably cool and power the ventilation for buildings—could help decarbonize the construction industry and provide an effective strategy for adapting to life-threatening heatwaves. Based on harmonic analysis, the method allows designers to thermally tune the form and mass of a building to meet chosen targets for temperature and ventilation in free-running mode. Once the optimal balance of exchange rates is known, design teams can proportionally vary the building height and ventilation openings against the surface area and thickness of an internal thermal mass. The possible permutations are infinite but parametrically constrained, allowing teams to fairly compare the functional and environmental credentials of different construction materials while they produce and evaluate preliminary options for organizing the exterior form and interior spaces of a building. An example study suggests that thin-shell structures of minimum weight, and even timber buildings, may be optimally tuned to produce ample ventilation and temperature attenuation.

Background: This study aimed to compile and analyze an assortment of research findings concerning potential therapeutic strategies for Myalgic Encephalomyelitis/Chronic Fatigue Syndrome (ME/CFS). The understanding of the multifaceted nature of ME/CFS and the need for varied and personalized therapeutic approaches were central to this investigation.Methods: A comprehensive review and analysis of various studies conducted on ME/CFS was undertaken. These studies covered a wide array of interventions, including pharmacological treatments, nutritional supplements, dietary changes, physical therapies, and lifestyle modifications. The analysis pertained to the effectiveness of these interventions, potential physiological and biochemical markers, and the response of ME/CFS patients to different treatment strategies.Results: The 22 selected papers investigated demonstrated varied responses to the multitude of interventions. While some interventions showed significant improvement in fatigue and biochemical parameters, others found no significant differences between the treated and control groups. Potential physiological and biochemical markers for ME/CFS, such as impaired T cell metabolism, reduced flow-mediated dilation, and decreased work rate at the ventilatory threshold, were highlighted.Conclusion: The findings underscored the complexity of ME/CFS and the need for personalized treatment strategies. Despite mixed results and several limitations, these studies collectively contributed to understanding ME/CFS's complex pathophysiology and treatment, laying the groundwork for future research towards more effective therapeutic strategies for this debilitating disease.

In financial time series modelling and forecasting, combining ARMA and GARCH models tend to produce superior and reliable models for volatility persistence, half-life volatility and backtesting (application of model in real life). In Nigeria, banking stocks are mostly traded because of its potential benefits to investors. This study modelled and forecasted the Guaranty Trust (GT) Bank daily stock returns from January 2^nd 2001 to May 8^th 2017 data set collected from a secondary source. The ARMA-GARCH models, persistence, half-life and backtesting were used to analysed the collected data using student t and skewed student t distributions, and the analyses are carried out R environment using rugard and performanceAnaytics Packages. The study revealed that using the lowest information criteria values only could be misleading rather we added the use of backtesing. The ARMA(1,1)-GARCH(1,1) models fitted exhibited high persistency in the daily stock returns while the days it takes for mean-reverting of the models ranges from 5 days to 100 days but unfortunately the models failed backtesting. The results further revealed ARMA(1,1)-eGARCH (2,2) model with student t distribution provides a suitable model for evaluating the GT bank stock returns among the competing models while it takes less than 30 days for the persistence volatility to return back to its average value of the stock returns. This study recommended that researchers should adopt backtesting approach while fitting GARCH models while GT bank stocks investor should be assured that no matter the fluctuations in the stock market, the GT bank stock returns has the ability to returns to its mean price return.

The paper introduces a valuable new description of fatigue strength in relation to material properties and thus a new perspective on the overall understanding of the fatigue process. Namely, a relation between the endurance limits and the accompanying values of the critical resolved shear stress (CRSS) for various metallic materials has been discovered by means of a multiscale approach for fatigue simulation. Based on the uniqueness of the relation, there is a strong indication that it is feasible to relate the endurance limit to the CRSS, and not to the ultimate strength as often done in the past.

Primary Sjögren's syndrome (pSS) is a chronic, systemic autoimmune disease defined as exocrine gland hypofunction resulting in dry eyes and dry mouth. Recent interest in biological therapies for pSS has been garnered, however achieving FDA-approval has been challenging due to the numerous complications in the trials. Current literature lacks insight and a molecular target-based approach to the development of biological therapies. This review focuses on novel research in newly defined drug targets and latest clinical trials for pSS treatment. A literature search was conducted on ClinicalTrials.gov using the search term “Primary Sjögren's syndrome”. Articles published between 2000 and 2021 in English language were included. Our findings revealed the potential targets for pSS treatment in clinical trials and the most recent advances in understand-ing of molecular mechanisms underlying the pathogenesis of pSS. A prominent gap in current trials is overlooking the treatment of extraglandular symptoms such as fatigue, depression and anxiety which pervade most patients with pSS. Based on dryness and these symptom-directed therapies, emerging biological agents targeting inflammatory cytokines, signal pathways and immune reaction have been studied and proved the efficacy and safety. Novel therapies may complement existing non-pharmacological methods of alleviating symptoms of pSS. Better grad-ing systems adding extraglandular symptoms to gauge disease activity and severity should be created. The future of pSS therapies may lie in gene therapy, stem cell and tissue engineering ther-apy.

Fibromyalgia (FM) and Myalgic Encephalomyelitis/Chronic Fatigue Syndrome (ME/CFS) are diseases of unknown etiology presenting complex and often overlapping symptomatology. Despite promising advances on the study of miRNomes of these diseases, no validated molecular diagnostic biomarker yet exists. Since FM and ME/CFS patient treatments commonly include polypharmacy it is of concern that biomarker miRNAs are masked by drug interactions. Aiming at discriminating between drug-effects and true disease-associated differential miRNA expression, we evaluated the potential impact of commonly prescribed drugs on disease miRNomes, as reported by the literature. By using the web search tools SM2miR, Pharmaco-miR and repoDB, we found a list of commonly prescribed drugs that impact on FM and ME/CFS miRNomes and therefore could be interfering in the process of biomarker discovery. On another end, disease-associated miRNomes may incline patient´s response to treatment and toxicity. Here, we explored treatments for diseases in general that could be affected by FM and ME/CFS miRNomes finding a long list of them, including treatments for lymphoma, a type of cancer affecting ME/CFS patients at a higher rate than healthy population. We conclude that FM and ME/CFS miRNomes could help refine pharmacogenomic/pharmacoepigenomic analysis to elevate future personalized medicine and precision medicine programs in the clinic.

A progressive FEA fatigue degradation model for composites was developed and implemented using a UMAT user material subroutine in Abaqus. Numerical results were compared to experimental strain field data from high frequency Digital Image Correlation (DIC) of split disk fatigue testing of pressure vessel cut outs with holes. The model correctly predicted the onset and evolution of damage in the matrix as well as the onset of fiber failure. The model use progressive failure analysis based on the maximum strain failure criterion, the cycle jump method and Miner sum damage accumulation rule. A parameter study on matrix properties was needed to capture the scatter in strain fields observed experimentally by DIC. S-N curve for the matrix material had to be lowered by 0% to 60% to capture the experimental scatter. The onset of local fiber failure had to be described by local S-N curves measured by DIC having 2.5 times greater strain than that of S-N curves found from standard coupon testing.

Ofloxacin is a highly efficient and widely used antibiotic drug. It is classified as a refractory pollutant due to its poor biodegradability. Consequently, it is commonly found in water sources, requiring efficient methods for its removal. Advanced Oxidation Processes (AOPs) offer efficient alternatives since those yield complete degradation not achieved in adsorption or membrane processes. Previous studies suggest ofloxacin degradation follows a pseudo-first or -second order processes, whereas for full removal of refractory pollutants – lower pseudo-orders are required. Monitoring the actual “pseudo-order” degradation kinetics of ofloxacin is needed to evaluate any proposed AOP process. This study presents a simple procedure to evaluate pseudo-orders of AOPs. Photolysis of 20 mM ofloxacin solutions follow pseudo-zero order kinetics, with half-life times (t_1/2) of approx. 60 min. TiO₂ heterogenous catalyst show to have no influence at low concentration (0.2 mg L^-1) but a significant reduction of half-life time (t_1/2 = 20 min) and increase in pseudo-order (0.8) is measured at 2.0 mg L^-1. Similar results are obtained with homogenous catalysis by 2.0 mg L^-1 H₂O₂. The combination of H₂O₂ and TiO₂ catalysts shows additional reduction in half-time life with increase in the pseudo-order to 1.2. The conclusions are (1) heterogenous and homogenous photocatalysis can effectively degrade ofloxacin, (2) combined photocatalysis yields higher pseudo-order, being less prone to achieve full removal, (3) analysis of specific pseudo-orders in AOPs of refractory pollutants helps to further elucidate the efficiency of the processes.

In the second half of the 19th century a wave of modernisation, industrialisation and urbanisation swept the Nordic countries, catapulting what had until then been lagging and primarily rural countries into modernity. These major upheavals, however, also plunged the Nordic countries into a profound social and cultural crisis resulting from their consciousness of their own backwardness vis-a-vis the countries on the European continent, as well as the recognition that a nostalgic nationalism recalling a mythical past had become obsolete in the industrial age. In response to this crisis, a life reform movement emerged that was based on Arts and Crafts movements as well as various artistic and literary reform movements and—equally absorbing rural traditions and progressive social ideas—tried to establish a new national everyday culture. In this article, the two key terms coined by Ellen Key, “Festive Customs” (‘festvanor’) and “Everyday Beauty” (‘vardagsskönhet’)—the programmatic core of the Nordic life reform movement—are analysed and illustrated in various typical manifestations. It also examines to what extent the Nordic life reform movement with these two key concepts as its core agenda found expression in arts and crafts, in painting as well as in the architecture of the late nineteenth and early twentieth century and contributed to the progress of social and cultural renewal.

In light of the self-simulation hypothesis, a simple form implementation of the principle of efficient language is discussed in a self-referential geometric quasicrystalline state sum model in three dimensions. Emergence is discussed in context of geometric state sum models.

Electric moped scooter sharing services have recently experienced strong growth rates, particularly in Europe. Due to their compactness, environmental-friendliness and convenience, shared e-mopeds are suitable modes of transport in urban mobility to help reduce the environmental impact. However, its traffic-related, economic and environmental effects are merely represented in academic research. We used passenger car traffic data in Berlin generated by the multi-agent transport simulation framework MATSim to develop a python-based simulation, resembling an e-moped sharing system. Based on the results, a total cost of ownership and a life cycle assessment for fleet sizes of 2,500, 10,000 and 50,000 vehicles were conducted. The results indicate that a substantial part of all passenger car trips in Berlin can be substituted. The larger the fleet, the more and longer trips are replaced. Simultaneously, the efficiency in terms of fleet utilization decreases. The scenario with 10,000 e-mopeds offers the lowest total distance-based costs for sharing operators, whereas a fleet consisting of 2,500 vehicles exhibits the lowest environmental emissions per kilometer driven over the expected lifespan of a shared e-moped. Based on the renewable energy potential for 2050 forecasted by the German Federal Environment Agency, a significant overall decline in environmental impacts can be achieved.

The Ti-6Al-4V alloy is widely used in the manufacture of components that should have low density, high corrosion resistance, and fatigue strength. The fatigue strength can be improved by surface modification. The aim of this study was to determine the influence of plasma nitriding on the fatigue behavior of Ti-6Al-4V alloy with a lamellar microstructure (Widmanstätten type). Nitriding was executed at 720 °C for 4 hours in an atmosphere with N₂, Ar and H₂. Samples microstructure characterization was carried out by X-ray diffraction analysis, optical microscopy and scanning electron microscopy. The average roughness of the specimens was determined, and fatigue tests were executed in a bending-rotating machine with reverse tension cycles (R= -1). X-ray diffraction analysis revealed the matrix phases α and β, and the phases Ɛ-Ti₂N and δ-TiN in the nitrided alloy. A nitrogen diffusion layer was formed between the substrate and the titanium nitrides. Plasma nitriding resulted in an increase in low cycle fatigue strength, whereas at high cycles, both conditions exhibit similar behavior. The fracture surface of the fatigue tested specimens clearly revealed the lamellar microstructure. The fracture mechanism appears to be due to cracking at the interface of α and β phases of the lamellar microstructure.

In Europe we can see a change in the social structure in the last period. Average life expectancy has increased dramatically over the last 50 years. Because of the improved life situation and advanced level of health care, older people are slower. With advancing age, the likelihood of experiencing a variety of constraints such as visual impairment, reduced hearing or physical ability increases. In such a life stage tenants are often forced to leave their long-term living space because these homes can not serve "new" individual needs and the resulting personal protection goal. This transition from the privacy of their home to the new environment often appears to be a painful change. They will take their familiar and well-known surroundings, because their homes can not be adapted to serve new needs. It must be the policy’s role to create a new inclusive social space and the requirement for architects and designers to create new goals for the design of an adaptable environment. This is a comprehensive approach to the design of the outer and inner space that could serve people even if there is an unexpected situation and changes in movement and physiological limitations of older people. The contribution shows the results of the survey conducted in Germany and Slovakia. In the survey respondents expressed their opinion on what they considered important in creating an adaptive environment. Results are processed graphically with explanation. The results were mainly for designers and developers of the indoor environment. Based on the results of the questionnaire survey, studies of possible modifications in the interior of the flats were then prepared. The contribution yielded these results in three age groups of respondents; i. people aged 35, 50 and over 50.

A micromechanical model is implemented to indicate the progressive fatigue problem of a laminated composite with a central circular hole under fatigue loading based on a finite element model. The mechanical properties of the composite lamina are represented based on the characteristics of the fiber and the matrix through a micromechanics model. An appropriate algorithm is then adopted to simulate fatigue damage development in the composite lamina. According to this algorithm, the stress field of the composite subjected to fatigue load is initially obtained using the finite element method. Finally, the predicted results of the stresses in the constituents i.e. fiber and matrix are determined according to the micromechanical bridging model. Finally applying proper damage driving relations leads to damage degree in each element. The proposed model is proven to be successful in the observation of the fatigue behavior with stiffness degradation in each element of the composite in each cycle. Results are reported and validated using those micromechanical models and experimental data available in the literature.

The properties of the dark matter, dark energy, graviton and photon are discussed in terms of the new three-dimensional quantized space model. Three new particles (bastons) with the electric charges (EC) are proposed as the dark matters. It is proposed that the EC, LC and CC charges are aligned along the time axes but not along the space axes. The photon is confined on its corresponding three-dimensional quantized space. However, the graviton can be evaporated into other three-dimensional quantized spaces. The rest mass of the electron neutrino (n_e) of 3.494·10⁻³ eV/c² is obtained from the experimental vacuum energy density in terms of quantum field theory (QFT). The rest mass and force range of the massive g(0,0,0) graviton with the Planck size are m_g = 3.1872·10⁻³¹ eV/c² and x_r = 3.0955·10²³ m = 10.0 Mpc, respectively, based on the experimental rest mass and rms charge radius of the proton. The possible diameter (10 Mpc) of the largest galaxy cluster is remarkably consistent with the gravitational force range (10 Mpc). Then, the diameter of the largest dark matter distribution related to the largest galaxy cluster is 9.2865·10²³ m = 30 Mpc equal to the force range of the massive g(0) graviton with the rest mass of 1.0624·10⁻³¹ eV/c². Because of the huge number (N) of the evaporated gravitons, the very small Coulomb’s constant of about 10⁻⁴⁸k and large gravitation constant of 10⁶G_N are expected for the charged dark matters. Therefore, F_c(mm) > F_g(dd) > F_g(mm) > F_g(dm) > F_c(dd) > F_c(dm) = 0 for the proton-like particle. The proposed weak gravitational force between the dark matters and normal matters explains the observed dark matter distributions of the bullet cluster, Abell 1689 cluster and Abell 520 cluster. The transition from the galaxy without the dark matters to the galaxy with the dark matters are explained. Also, the accelerated space expansion is caused by the new space quanta created by the evaporated gravitons into the x1x2x3 space and repulsive electromagnetic force between dark matters corresponding to the dark energy. The decreasing coupling constant of the strong force, neutron lifetime anomaly and the pressure distribution inside the proton are explained by the unobservable proton and hadronization. And the rest mass of 1.4 TeV/c² is assigned to the Le particle with the EC charge of −2e. The proposed rest mass (26.12 eV/c²) of the B1 dark matter is indirectly confirmed from the supernova 1987A data. Also, the gravitation constant has been changing with the time because of the graviton evaporation.

The most widely accepted scientific theory for the origin of life on Earth is that prokaryotic microbes evolved from simple organic compounds in seawater under anoxic conditions. For about 1 billion years thereafter, these microbes consumed the same dissolved organic matter (DOM) from which they had evolved before scarcity of DOM forced the evolution of cyanobacterial photosynthesis followed by eukaryosis. Could the more efficient consumption of DOM have also stimulated the subsequent origin of multicellular animal life? In this report, we synthesize past and recent evidence to propose the “DOM uptake hypothesis” for the origin of metazoans. A choanoflagellate-like protozoan was the likely ancestor of the first sponge-like metazoan to evolve on Earth. Choanoflagellates have outwardly facing flagellae that are subject to viscous water movement, while sponges have choanocytes in chambers with flagellae directed to pump water with greater fluidity across an aquiferous system with a huge cellular surface area. While generally considered particle feeders, both choanoflagellates and sponges absorb DOM, with some sponges relying on DOM for as much as 90% of their diet. We propose that the earliest metazoans may have evolved to survive the dire nutritional conditions of the Cryogenian “snow-ball Earth” period (~700 million years ago) by developing a body plan with the enhanced ability to absorb low concentrations of DOM in seawater from sources such as the viral lysis of microbes, exudates of benthic stromatolites, or refractory DOM compounds. Additionally, species of extant sponges that have a high abundance of microbes living in their bodies consume the greatest amounts of DOM, suggesting that the DOM uptake hypothesis may also be dependent on microbial symbiosis.

In this review, we explore a broad-based view of technologies for supporting human activities on the Moon. Primarily, we assess the state of life support systems technology beginning with physicochemical processes, waste processing, bioregenerative methods, food production systems and the robotics and advanced biological technologies that support the latter. We observe that the Moon possesses in-situ resources but that these resources are of limited value in CELSS – indeed, CELSS technology is most mature in recycling water and oxygen, the two resources that are abundant on the Moon. This places a premium on developing CELSS that recycles other elements that are rarified on the Moon including C and N in particular but also other elements such as P, S and K which might be challenging to extract from local resources. Although we focus on closed loop ecological life support systems, we also consider related technologies that involve the application of biological organisms to bioregenerative medical technologies and bioregenerative approaches to industrial activity on the Moon as potential future developments.

The increasing amount of municipal sludge in China requires safe and effective management to protect human health and ensure environmental sustainability. Pyrolysis is a thermochemical process that that decompose organic matter at elevated temperature and under anaerobic conditions, and it has attracted an increasing attention in sludge treatment in the recent years. However, comprehensive environmental and economic assessment of sludge pyrolysis in China's context is rare, due to the small quantities of full-scale sludge pyrolysis plant. In this paper, we applied our design and operation parameters of full-scale sludge pyrolysis plants to generate the material and energy consumptions of the pyrolysis system under various of conditions, including sludge organic content and moisture content, system size, system energy distribution, and whether or not heat substitution is applied. Life cycle assessment and techno-economic assessment were then applied to investigate the environmental and economic performance of the system Our results demonstrate the significant environmental and economic impacts associated with sludge properties and system size. Generally, sludge with higher organic content and lower moisture content requires less natural gas consumption, which leads to a simultaneous improvement of the system environmental and economic performance. The system economic performance is more sensitive to the system size, and centralized sludge handling using a larger pyrolysis is more economic favorable. In the most ideal case, the average global warming potential and minimum sludge handling price of sludge pyrolysis could be as low as -32.5 kg CO₂-Eq/t DS and 188.8 $/t DS, respectively. Based on these results, we discussed the pathways that could be taken to further optimize the environmental and economic performances of the pyrolysis system.

Genes and gene trees have been extensively used to study the evolutionary relationships among populations, species, families and higher systematic clades of organisms. This brought modern Biology into a sophisticated level of understanding about the evolutionary relationships and diversification patterns that happened along the entire history of organismal evolution in Earth. Genes however have not been placed in the center of questions when one aims to unravel the evolutionary history of genes themselves. Thus, we still ignore whether Insulin share a more recent common ancestor to Hexokinase or DNA polymerase. This brought modern Genetics into a very poor level of understanding about sister group relationships that happened along the entire evolutionary history of genes. Many conceptual challenges must be overcome to allow this broader comprehension about gene evolution. Here we aim to clear the intellectual path in order to provide a fertile research program that will help geneticists to understand the deep ancestry and sister group relationships among different gene families (or orthologs). We aim to propose methods to study gene formation starting from the establishment of the genetic code in pre-cellular organisms like the FUCA (First Universal Common Ancestor) until the formation of the highly complex genome of LUCA (Last UCA), that harbors hundreds of genes families working coordinated into a cellular organism. The deep understanding of ancestral relationships among orthologs will certainly inspire biotechnological and biomedical approaches and allow a deep understanding about how Darwinian molecular evolution operates inside cells and before the appearance of cellular organisms.

The coronavirus of severe acute respiratory syndrome 2 (SARS-CoV-2), known as COVID-19, has spread rapidly around the world, leading to social detachment and the home office replacing face-to-face work. The performance of police officers faces limitations to the new requirements, while recognizing the need to ensure health and quality of life. Thus, the present study aimed to verify the panorama of the spread of COVID-19 among federal police officers by analyzing the presence of symptoms, individual protection measures (IPM), suspect screening measures (SSM) and examination for total antibodies (IgA, IgG and IgM). For this, data were collected through a questionnaire customized for this situation, blood for serological testing and measurements of clinical data from 56 federal police officers in the municipality of Marília (São Paulo, Brazil). There was no positive result in the Anti-SARS-CoV-2 serological test in any sample participant. The mean value of the Body Mass Index (27.2 ± 5.4 kg / m2) suggests overweight and obesity, in addition to the presence of hypertension in 16.1%, diabetes in 3.6%, asthma in 3.6 % and obesity by 25%, which represents an important risk of complications for COVID-19. The use of a mask is the most frequent IPM (96.4%) and most of the sample has used a cloth or home mask (90.9%). However, 47.3% have not performed the correct cleaning of the masks and 5.5% have not taken any care with mask hygiene. It can be concluded that care in relation to the professional activities of federal police to date has prevented the spread of SARS-CoV-2 and that they must be maintained or increased because risk factors, which involve quality of life and worsening of the contamination condition, were detected in the participants.

Background and Aim: Cancer is a disease characterized by uncontrolled cell growth and invasion of tissues. It seems that personality differences and psychological factors are important factors that lead to different reactions to cancer. Therefore, the main purpose of the present study was to investigate the relationship between type D, stress level of life events, personality traits, and anxiety sensitivity in people with breast cancer attending to Tehran Bu-ali Hospital. Methods: The study was a correlational study in which 100 cancer patients referred to Bu-ali Hospital in Tehran, selected by the available sampling method from April to June 2018. The tools used included the Denollet DS-14 Type D Questionnaire, the Paykel Life events Questionnaire, the Eysenck Personality Questionnaire, the ASI Anxiety Scale, Floyd et al., Data analysis in this study is taken place by using SPSS software, two descriptive levels (percentage, frequency, etc.) and regression. Results: The study results showed that there is a relationship between type D personality with stress of life events, neurosis, extraversion, and psychopath dimensions of personality and anxiety sensitivity in breast cancer patients. Conclusion: Psychological factors play a role in the incidence and exacerbation of breast cancer, and ultimately patients with personality type D and personality traits such as psychosis and high anxiety sensitivity and more stress of life events show more symptoms.

This initial report of a longitudinal study of 192 English hospital nurses has measured Nursing Values (the 6Cs of nursing); Personality, Self-Esteem and Depression; Burnout Potential; Work-Life Balance Stress; ‘Hardy Personality’; and Intention to Leave Nursing. Correlational, component and cluster analysis identifies four groups: “The Soldiers” (N = 79) , with medium scores on most measures, who bravely ‘soldier on’ in their nursing roles, in the face of numerous financial cuts to the National Health Service, and worsening nurse-patient ratios; “Cheerful Professionals” (N = 54), coping successfully with nursing roles, and a variety of challenges, in upwardly mobile careers; “High Achievers” (N = 39), senior nurses with strong profiles of a ‘hardy personality’, and commitment to fundamental nursing values; “Highly Stressed, Potential Leavers” (N = 20), with indicators of significant psychological distress, and difficulty in coping with nursing role challenges. We propose a model of co-counselling and social support for this distressed group, by nurses who are coping more successfully with multiple challenges. We discuss the role of nurse educators in fostering nursing values, and developing and supporting ‘hardy personality’ and emotional resilience in recruits to nursing. This study is framed within the disciplinary approach of Critical Realism, which identifies the value basis for research and dialogue in developing strategies for social change.

The purpose of this study was to assess the extent to which self-esteem and depression mediated the influence of internalized stigma on life satisfaction among Korean out-of-school youths. Cross-sectional data on 318 youths provided information on perceived stigma, self-esteem, depression, life satisfaction, and personal characteristics. A multinomial logistic regression analysis was followed by structured path analysis to investigate the mediation effects. Internalized stigma was negatively associated with life satisfaction. Self-esteem significantly mediated the influence of stigma on depression and the influence of depression on life satisfaction. Further, stigma directly and significantly influenced depression. This study demonstrated that self-esteem and depression were important to the relationship between internalized stigma and life satisfaction. Implications for possible policies and programs with the aim of helping out-of-school youths to integrate and lead successful satisfying lives are discussed.

End-stage renal disease (ESRD) is associated with fatigue and physio-somatic symptoms. The aims of this study are to delineate the associations between severity of fatigue and physio-somatic symptoms and glomerular filtration rate, inflammatory biomarkers, and Wnt/catenin-pathway proteins. The Wnt-pathway related proteins β-catenin, Dickkopf-related protein 1 (DKK1), R-spondin-1, and sclerostin were measured by ELISA technique in 60 ESRD patients and 30 controls. The Fibromyalgia and Chronic Fatigue Syndrome (FF) Rating Scale was used to assess severity of FF symptoms. ESRD is characterized by a significant increase in the total FF score, muscle tension, fatigue, sadness, sleep disorders, GI symptoms, and a flu-like malaise. The total FF score was significantly correlated with serum levels of urea, creatinine, phosphate, and copper (positively), and β-catenin, eGFR, hemoglobin, albumin, and zinc (inversely). The total FF score was associated with the number of total dialysis and weekly dialysis sessions, and these dialysis characteristics were more important in predicting FF scores than eGFR measurements. Partial Least Squares analysis showed that the FF score comprised two factors which are differently associated with biomarkers: a) 43.0% of the variance in fatigue, GI symptoms, muscle tension, sadness, and insomnia is explained by hemoglobin, albumin, zinc, β-catenin, and R-spondin-1; and b) 22.3% of the variance in irritability, concentration and memory impairments by increased copper and cations/chloride ratio, and male sex. ESRD patients show high levels of fatigue and physio-somatic symptoms which are associated with hemodialysis and mediated by dialysis-induced changes in inflammatory pathways, the Wnt/catenin pathway, and copper.

This paper reports the findings from a pilot study designed to explore the barriers, facilitators and similarities with the delivery and implementation of two distinct models of Advance Care Planning (ACP) documentation for older adults in their last year of life used by health care professionals in their clinical practice. PACe (Proactive Anticipatory Care Plan): a GP led model and PEACE (Proactive Elderly Persons’ Advisory CarE): a nurse led model with community geriatrician oversight were used by participants in their clinical practice. Telephone interviews were conducted with general practitioners (GPs) to explore their views of using the PACe tool. Hospital admission avoidance matrons took part in face to face interviews and care staff employed in private residential care homes took part in individual telephone interviews to explore their views of using the PEACE tool. GPs and admission avoidance matrons were employed by Clinical Commissioning Groups (CCGs) and all study participants were recruited from the South East of England where data collection took place in 2015. Nine telephone interviews and two face-to-face interviews (one joint and one individual) were conducted with twelve participants. The data was analysed thematically. Participants highlighted the similarity of both tools in providing focus to ACP discussions to inform individual end-of-life care preferences. The importance of relationships was a pivotal theme-established, trusting inter-professional relationships to enable multidisciplinary teamwork and a prior relationship with the older person (or their proxy in the case of cognitive impairment) to enable conversations of this nature. Using both tools enabled participants to think critically and reflect on their own practice was another theme identified. Notwithstanding participants’ views to improve the layout of both tools, using a paper-based approach to deliver streamlined ACP and end-of-life care was a theme to emerge as a barrier which focused on the problems with access to paper-based documentation, accuracy and care co-ordination in the context of multidisciplinary team working. The value of technology in overcoming this barrier and underpin ACP as a means to help simplify service provision, promote integrated professional practice and provide seamless care was put forward as the solution.

Post-mortem characterisation is a pivotal tool to trace back to the origin of structural failures in modern engineering analyses. This work presents a comparison of both the crack propagation profiles and the rupture roughness profiles based on areal parameters for total fracture area. Notched and smooth samples made of weather-resistant structural steel (10HNAP), popular S355J2 structural steel and aluminium alloy AA2017A under bending, torsion, and combined bending-torsion are investigated. After the fatigue tests, fatigue fractures are measured with an optical profilometer, and the relevant surface parameters are critically compared. The results show a great impact of the loading scenario on both the local profiles and the total fracture areas. In this work, the results of both approaches (local and total fracture zones) for specimens with different geometries are investigated. For all specimens, measured texture parameters decreased in the following order: total area, rupture area, and propagation area.

Reliable fatigue design rules affect the proactive identification of safety parameters in aerospace industry. Numerous fatigue crack initiation and propagation models, linear and nonlinear, have been developed for designing purposes or estimation of the remaining life of aging airplanes. Depending on the adopted assumptions, the accuracy varies for different loading histories, loading types, and materials. Semi empirical models are simple but yield significant inaccuracies. Models with better theoretical basis provide better accuracy, but implementation in real conditions is problematic. In the present work, a review of author’s recent fatigue crack initiation and propagation models based on physical mechanisms is presented and improvements are proposed. Verification of the models on test results is provided and discussed.

Background: Knee joint is a common site for injury among younger people, the purpose of this study is to measure the skeletal muscle endurance and strength on people with prior knee reconstruction surgery. Methods: Young healthy female subjects were tested who reported having knee reconstruction surgery of over one year prior to testing. The skeletal muscle endurance index of the hamstring and quadriceps muscles was determined as the decline in the specific muscle acceleration in response to 2, 4, and 6 Hz electrical stimulation. Maximal isometric muscle strength (MVC) was measured in the hamstring and quadriceps muscles. Results: The hamstring muscles in the affected leg had less endurance than the non-affected leg at 6 Hz stimulation (55.5 ± 13.2% versus 78.0 ± 13.3%, P = 0.01). Muscle endurance was not reduced in the quadriceps muscles in the affected leg compared to the non-affected leg at 6 Hz stimulation (78.0 ± 13.3% versus 80.3 ± 10.0%, P = 0.69). There were no differences in MVC between the affected and non-affected legs for either the hamstring (P= 0.20) or quadriceps muscles (p = 0.67). Conclusions: Muscle endurance is reduced in the hamstring muscles at least one-year post injury, while hamstring strength is not. Reduced hamstring muscle endurance could be a result of a lack of focus on muscle endurance during rehabilitation after injury and may contribute to re-injury in the particular muscle even in people who have recovered muscle strength.

Despite recent advances in immune-modulatory drugs, pharmacological therapies have been proven ineffective in severe presentations of multiple sclerosis (MS), including secondary progressive MS. At present, therapeutic interventions' performance is primarily focused on ameliorating symptoms to improve the patient's quality of life. Among complementary treatments, nutrition has been considered a decisive factor to control symptoms and enhance the wellness of MS patients. Although no special diets are associated with MS, the impact of diet and dietary supplements on the course of progressive forms of the disease have been studied during the last years. Fatigue is among the most common and disabling symptoms reported by MS patients. Fatigue has been defined in the Multiple Sclerosis Council for Clinical Practice Guidelines (MSCCPG, 1998) as a "subjective lack of physical and/or mental energy that the individual perceives as an interference with habitual and desired activities". This study aimed to compare the psychometric functioning of the "Fatigue Severity Scale" (FSS) and the "Modified Fatigue Impact Scale" (MFIS) in our sample of people with MS. Specifically, during chronic treatment, the change in these two parameters with two vitamin-rich dietary supplements (Citozym® and Ergozym®) was evaluated. The impact of these nutritional supplements revealed differences in antioxidant and anti-inflammatory parameters between treatment groups with subsequent improvement in fatigue. In conclusion, the results obtained have confirmed the effectiveness of complementary nutritional therapies, evaluated essentially based on hematological biomarkers, through which it is possible to act on disability to improve the quality of life of MS patients.

Forces and mechanical energy are prevalent in living cells. This may be because forces and mechanical energy preceded chemical energy at life’s origins. Mechanical energy is more readily available in non-living systems than the various other forms of energy used by living systems. Two possible prebiotic environments that might have provided mechanical energy are hot pools that experience wet/dry cycles and mica sheets as they move, open and shut, as heat pumps or in response to water movements.

Motivation: there is a paradox at the heart of informatics where practical implementation generally fails to understand the socio-technical impact of novel technologies and disruptive innovation when adopted in `real-world’ systems. This phenomenon, termed technological determinism, is manifested in a time-lag between the adoption of novel technologies and an understanding of the underlying theory which develops following research into their adoption. Methods: we consider informatics theory as it relates to: social informatics and how humans’ function in society, the relationship between society and technology, information systems, information systems design, and human-computer interactions. The challenges posed by novel technologies and disruptive innovation are considered as they relate to information systems and information systems design. Open research questions with directions for future research are discussed with an introduction to and our proposed approach to socio-technical information system design. Significance: we conclude that the adoption of disruptive innovation presents both opportunities and threats for all stakeholders in computerised systems. However, determinism is a topic requiring research to generate a suitable level of understanding and technological determinism remains a significant challenge.

The Connor–Davidson Resilience Scale (CD-RISC) and the Brief Resilience Scale (BRS) are two widely used scales to measure resilience. Although both scales seek to assess an individual’s ability to recover from and adapt to disruptions or stressful events, they may capture different aspects of resilience. While the CD-RISC focuses on resources that can help individuals recover from and adapt to disruptions or stressful events, the BRS directly measures one’s ability to bounce back or be resilient. The aim of this study is to empirically examine the differences between the CD-RISC and the BRS. Two samples (n = 202, 246) consisting of undergraduate students from Taiwan were used. The results of confirmatory factor analysis show that the CD-RISC and the BRS are highly correlated but still distinct. The results of regression analyses show that the CD-RISC and the BRS have unique predictive effects on depression and life satisfaction. The research findings suggest that the CD-RISC and the BRS capture different aspects of resilience. For future research on resilience, researchers should pay attention to the differences between these scales and choose the one that most closely fits their research purpose.

Since the beginning, humans advanced their civilization by making better tools to improve their lives. Tools and products were designed for better living considering manufacturing issues, cost and time as predominant criteria. It has become clear that not considering environment and society, both at local/global levels, has now become a major impediment affecting living conditions on a large portion of the Earth and in many societies. Design methodologies should lead to creative solutions with consideration to engineering and economics for practicality but also to environmental and social constraints for sustainability. We propose a comprehensive design methodology based on multidisciplinary design to include the knowledge of humanities, environmentalists, science and engineering, and allowing for experts’ inputs from these areas to provide a holistic approach to engineering design . For example, experts in humanities are expected to interact with stakeholders to evaluate their value systems to provide guidance for the design. The methodology that we synthesize is new and combines (i) Societal level impacts at all scales, (ii) Environmental impacts and (iii) Engineering design with economic impacts, including uncertainty considerations. The proposed design methodology is called Social-Environmental-Economical-Engineering Framework (SEEEF). It can utilize concepts and tools such as Circular Design, Doughnut Economics, design based on environmental life cycle analysis, among others. SEEEF is quantity based and provides steps for evaluating any project or product in an objective manner and will help train engineers in design for sustainability. It also provides non-engineers with a significant role in design to increase their understanding of the hard constraints of engineering. Ultimately, SEEEF allows society to take an informed decision considering short/long term and local/global impacts of the design and the pertinent uncertainties.

Background: It is unknown whether lowered steady state levels of sex hormones coupled with changes in those hormones during the menstrual cycle could be associated with the presence and severity of premenstrual syndrome (PMS).Objective: To examine associations between levels of progesterone and oestradiol during the menstrual cycle and PMS severity considering different diagnostic criteria for PMS.Methods: Forty women aged 18-45 years with a regular menstrual cycle completed the Daily Record of Severity of Problems (DRSP) for all 28 consecutive days of the menstrual cycle. Blood was sampled at days 7, 14, 21 and 28 to assay oestradiol and progesterone. Results: We developed a new diagnosis of peri-menstrual syndrome, which is characterized by increased DRSP severity in pre and post-menstrual periods and increased scores on the major DRSP dimensions, i.e. depression, physio-somatic symptoms, breast tenderness and appetite, and anxiety. This new diagnosis performed better than classical diagnoses of PMS, including the one presented by the American College of Obstetricians and Gynecologists. Lowered steady state levels of progesterone, when averaged over the menstrual cycle, together with declining progesterone levels during the luteal phase predict severity of peri-menstrual symptoms. Steady state levels of oestradiol and declining oestradiol levels during the cycle are also related to DRSP severity although most of these effects appeared to be mediated by progesterone. Conclusion: A significant increase in menstrual-cycle related symptoms can best be conceptualized as “peri-menstrual syndrome” and may result from “corpus luteum insufficiency”, which may result from suboptimal pre-ovulatory follicular development. Future research should trial Clomiphene citrate (given the first 5 days of the cycle) and a mid-cycle injection of human Chorionic Gonadotrophin in subjects with peri-menstrual syndrome.

To gain insight into riser motions and associated fatigue damage due to vortex-induced vibration (VIV), data loggers such as strain sensors and/or accelerometers are sometimes deployed on risers to monitor their motion in different current velocity conditions. Accurate reconstruction of the riser response and empirical estimation of fatigue damage rates over the entire riser length using measurements from a limited number of sensors can help in efficient utilization of the costly measurements recorded. Several different empirical procedures are described here for analysis of the VIV response of a long flexible cylinder subjected to uniform and sheared current profiles. The methods include weighted waveform analysis (WWA), proper orthogonal decomposition (POD), modal phase reconstruction (MPR), a modified WWA procedure, and a hybrid method which combines MPR and the modified WWA method. Fatigue damage rates estimated using these different empirical methods are compared and cross-validated against measurements. Detailed formulations for each method are presented and discussed with examples. Results suggest that all the empirical methods, despite different underlying assumptions in each of them, can be employed to estimate fatigue damage rates quite well from limited strain measurements.

The influence of the austempering temperatures on the microstructure and mechanical properties of austempered ductile cast iron (ADI) was investigated. ADI is nodular graphite cast iron, which owing to higher strength and elongation exceeds mechanical properties of conventional spheroidal graphite cast iron. Such a combination of properties is achieved by the heat treatment through austenitization, followed by austempering at different temperatures. The austenitization conditions were the same for all the samples: temperature 890°C, duration 30min, and quenching in a salt bath. The main focus of this research was on the influence of the austempering temperatures (270°C, 300°C, and 330 C) on the microstructure evolution, elongation, toughness and fatigue resistance of ADI modified by certain amount of Ni, Cu, and Mo. The Vickers and Rockwell hardness decreased from 535.7 to 405.3HV/1 (55.7 to 44.5HRC) as the austempering temperature increased. Optical images showed the formation of graphite nodules and matrix composed of ausferrite; the presence of these phases was confirmed by an XRD diffraction pattern. A fracture surface analysis revealed several types of the mechanisms: cleavage ductile, transgranular and ductile dimple fracture. The stress-controlled mechanical fatigue experiments revealed that a 330°C austempering temperature ensures the highest fatigue life of ADI.

The origin of life was a cosmic event happened on primitive Earth. A critical problem to better understand the origins of life in Earth is to glimpse in which chemical scenarios the basic building blocks of biological molecules could be produced. Classic works in pre-biotic chemistry frequently considered early Earth as a homogeneous atmosphere constituted by chemical elements such as methane (CH₄), ammonia (NH₃), water (H₂O), hydrogen (H₂) and hydrogen sulfide (H₂S). Under that scenario, Stanley Miller was capable to produce amino acids and solved the question about the origin of proteins. Conversely, the origin of nucleic acids has tricked scientists for decades as nucleotides are complex though necessary molecules to allow the existence of life. Here we review possible chemical scenarios that allowed not only the formation of nucleotides but also other significant biomolecules. We aim to provide a theoretical solution for the origin of biomolecules at specific sites named “Prebiotic Chemical Refugia”. A prebiotic chemical refugium should therefore be understood as a geographic site in prebiotic Earth on which certain chemical elements were accumulated in higher proportion than expected, facilitating the production of basic biomolecules. Plus, this higher proportion should not be understood as static, but dynamic; once the physicochemical conditions of our planet changed periodically. This different concentration of elements, together with geochemical and astronomical changes along days, synodic months and years provided somewhat periodic changes in temperature, pressure, electromagnetic fields, and conditions of humidity; among other features. Recent and classic works suggesting most likely prebiotic refugia on which the main building blocks of biological molecules might be accumulated are reviewed and discussed.

Phylogenies depict shared evolutionary patterns and structures on a tree topology, enabling the identification of hierarchical and historical relationships. Recent analyses indicate that phylogenetic signals extend beyond the primary structure of protein or DNA, and various aspects of codon usage biases are phylogenetically conserved. Several functional biases exist within genes, including the number of codons that are used, the position of the codons, and the overall nucleotide composition of the genome. Codon usage biases can significantly affect transcription and translational efficiencies, leading to differential gene expression. Although systematic codon usage biases originate from the overall GC content of a species, ramp sequences, codon aversion, codon pairing, and tRNA competition also significantly affect gene expression and are phylogenetically conserved. We review recent advances in analyzing codon usage biases and their implications in phylogenomics. We first outline common phylogenomic techniques. Next, we identify several codon usage biases and their effects on secondary structure, gene expression, and implications in phylogenetics. Finally, we suggest how codon usage biases can be included in phylogenomics. By incorporating various codon usage biases in common phylogenomic algorithms, we propose that we can significantly improve tree inference. Since codon usage biases have significant biological implications, they should be considered in conjunction with other phylogenetic algorithms.

In the Netherlands, the assessment of existing prestressed concrete slab-between-girder bridges showed that the thin, transversely prestressed slabs may be critical for static and fatigue punching when evaluated using the recently introduced Eurocodes. On the other hand, compressive membrane action increases the capacity of these slabs and changes the failure mode from bending to punching shear. To improve the assessment of the existing prestressed slab-between-girder bridges in the Netherlands, two 1:2 scale models of an existing bridge, the Van Brienenoord Bridge, were built in the laboratory and tested monotonically as well as under cycles of loading. The result of these experiments is: 1) the static strength of the decks, showing that compressive membrane action significantly enhances the punching capacity, and 2) the Wöhler curve of the decks, showing that compressive membrane action remains under fatigue loading. The experimental results can then be used for the assessment of the most critical existing slab-between-girder bridge. The outcome is that the bridge has sufficient punching capacity for static and fatigue loads, and thus that the existing slab-between-girder bridges in the Netherlands fulfil the code requirements for static and fatigue punching.

Since electrical resistivity of concrete can be measured in a more rapid and simple way than chloride diffusivity, it should be primarily regular quality control of the electrical resistivity of concrete which provides the basis for indirect of quality control of concrete durability during the concrete construction. If this is realized, the electrical resistivity of concrete can be a crucial parameter to establish maintenance strategy for marine concrete structures. Electrical resistivity of concrete is important to estimate two processes involved in corrosion of reinforcement: initiation (chloride penetration) and propagation (corrosion rate). The resistivity of concrete structure exposed to chloride indicates the risk of early corrosion damage, because a low resistivity is related to rapid chloride penetration and to high corrosion rate. Concrete resistivity is a geometry-independent material property that describes the electrical resistance, which is the ratio between applied voltage and resulting current in a unit cell. The current is carried by ions dissolved in the pore liquid. While some data exist on the relationship between moisture content on electrical resistivity of concrete, very little research has been conducted to evaluate the effect of chloride on the conduction of electricity through concrete. The purpose of this study is to examine and quantify the effect of pore water and chloride content on surface electrical resistivity measurement of concrete. It was obvious that chloride content had influenced the resistivity of concrete and the relationship showed a linear function. That is, concrete with chloride ions had a comparatively lower resistivity. Chloride can lead to underestimate the electrical resistivity of concrete. Conclusively, this paper suggested the quantitative solution to depict the electrical resistivity of concrete with various chloride contents.

Municipal solid waste management is a major concern for developing countries all over the world. The collection and transportation accounts for major portion of expenditure in developing country like India. The compaction of waste is being practiced in some major cities of India as they provide economical benefit but the environmental benefits of compaction are not very clear. The preset study evaluates the environmental impacts due to transportation of non-compacted and compacted waste from the transfer station to the landfill site using life cycle assessment approach. The study compared transportation of non-compacted waste with the waste compacted by the truck mounted refuse compactor and portable stationary compactor. The functional unit defined was the amount of waste generated per day in the study area taken as Patna city and GaBi 10.5 used for impact assessment. The study found that the transportation of waste compacted by truck mounted refuse compactor had the least environmental impacts on all impact categories. The study recommends the compaction of waste by the truck mounted refuse compactor and then proceed for transportation. Also, the compaction of waste is recommended as it improve the overall environment performance of municipal solid waste management.

In Nature, it is common for living plants and non-living plant tissues to consist of materials with anisotropic multilayer and non-homogenous structure. The structure of tissues determines their self-shaping and self-folding capabilities in response to a stimulus in order to activate different functionalities. Predetermined movements are realized according to changes in environmental conditions, which trigger the fibrous anisotropic structure of the plants’ material. In this study, we present the fabrication process of low-cost anisotropic multilayer materials that are capable of realizing complex movements caused by small temperature changes (<40 ^oC). The mismatch in the thermo-mechanical properties between three or more anisotropic thin layers creates responsive materials that alter their shape owing to the developed internal stresses. Isotropic layers can perform only bending movements, whereas anisotropic multilayer materials can perform bending, twisting or complex combined modes. The movements of the material can be controlled by forming anisotropic homogenous metallic strips over an anisotropic polymer. As a result, inexpensive responsive materials can be developed to passively react to a very broad range of thermal requirements. We studied the major parameters that affect the sensitivity of the developed materials, as well as their failure modes and crack formation under thermal fatigue conditions.

There are many welded structures in the world such as bridges and viaducts that are subject to fatigue. These structures, generally made of non-alloy or low-alloy steels, have been put into operation some of them with many years ago and have accumulated a large number of variable load cycles over the time. For this reason the occurrence of fatigue phenomenon is inevitable and consists in the occurrence of failures at stresses applied to the structure, below the yield limit of the material. These stresses under the static loads would not cause the failures to appear..This paper will investigate whether two reconditioning techniques “weld toe grinding” and “WIG remelting weld toe”, influences favorably the behavior of welded structures made from HSLA steel, in static and variable loads and therefore if the application of these techniques is justified in both cases. In the paper will be presented the chemical composition and mechanical properties of the base and filler materials, micro and macrostructures, graphics with the variation of microhardness, static and fatigue tensile tests will be performed, and it will be rised durability curve in case of fatigue tests.

Abstract: Early life gut microbiota have been increasingly recognized as major contributors to short and/or long-term human health and diseases. Numerous studies have demonstrated that human gut microbial colonization begins at birth but continues to develop a succession of taxonomic abundances for two to three years until the gut microbiota reaches adult-like diversity and proportions. Several factors, including gestational age (GA), delivery mode, birth weight, feeding types, antibiotic exposure, maternal microbiome and diet influence the diversity, abundance and function of the early life gut microbiota. Gut microbial life is essential for assisting with the digestion of food substances to release nutrients, exerting control over pathogens, stimulating or modulating the immune system and influencing many systems such as the liver, brain, and endocrine system. Microbial metabolites play multiple roles in these interactions. Furthermore, studies provide evidence supporting that imbalances of the gut microbiota in early life, referred to as dysbiosis, are associated with specific childhood or adult disease outcomes, such as asthma, atopic dermatitis, diabetes, allergic diseases, obesity, cardiovascular diseases (CVD) and neurological disorders. These findings support that the human gut microbiota may play a fundamental role in the risk of acquiring diseases that may be programmed during the early life stage. In fact, it is critical to explore the role of the human gut microbiota in early life. In this review, we summarize the general understanding of the colonization and development of the gut microbiota in early life, highlighting the recent findings regarding the relationship between the gut microbiota composition and their metabolites, and immune functions, which could significantly influence long-term health and disease. We then review known pathophysiological interactions of the early gut microbiome with a number of well characterized diseases and pose potential etiological mechanisms.

Efforts to quantify and reduce greenhouse gas (GHG) emissions of the built environment often neglect embodied emissions, instead focusing on reducing emissions from building operations. Utilizing sustainably sourced mass timber offers low embodied carbon alternatives to traditional concrete and steel structural systems, however the variability in embodied carbon for different mass timber approaches remains understudied. In this study, we used life cycle assessment (LCA) to compare the whole building embodied carbon of nine mass timber design options and two typical concrete and steel reference cases for an eight-story mixed-use building, ensuring structural, acoustic, thermal, programmatic, and fire-rating equivalence between the designs. The study found that the mass timber designs vary significantly, ranging between a 14-52% reduction in whole building embodied carbon from the most impactful reference case, and a 31-73% reduction when considering the structural systems alone. This study demonstrates the value that whole building LCA (WBLCA) provides as a primary driver for low-carbon structural system design and architectural development of mass timber buildings, beyond that of single material comparisons using environmental product declarations (EPDs).

Additive manufacturing (AM) are used in several industries such as automotive, aerospace, and medical sciences. One of the most common devices used in additive manufacturing is fused deposition modeling (FDM) 3D printers. This fabrication method has different inputs that affect the quality of the parts. In this research, the bending fatigue properties of polylactic acid (PLA) biomaterial made with a 3D printer are investigated. To demonstrate the influence of printing parameters on fatigue lifetime, standard specimens with nozzle diameters of 0.2-0.6 mm, extruder temperature of 180-240°C, and print speed of 5-15 mm/s were printed. After performing fully-reversed bending fatigue tests, it was found that printed specimens at 180°C have the best fatigue lifetime in most cases. Accordingly, fatigue behavior improved by reducing the nozzle diameter. Printing at lower temperatures also improved fatigue lifetime. The printing speed affected the slope of the S-N diagram, known as the fatigue strength exponent.

There is still little research on psychological wellbeing and reported problems in preadolescents and adolescents under therapy for leukemia, also comparing them with their healthy peers. The present study aims to analyze the life perceptions, psychological well-being and problems’ intensity in these patients during the first year of therapy and to compare these reports with those of matched healthy peers adopting a battery of self-report questionnaires. Mann-Whitney tests identified the younger patients more at risk than older ones in their problems’ intensity and psychological symptoms. Older patients resulted instead more vulnerable regarding past life perceptions. Wilcoxon test with 2 dependent samples analyses showed that: healthy peers have a better perception of current life and lower percentage of somatization symptoms than patients after 6-months post-diagnosis. On the other hand, healthy peers reported more problems dealing with impulsivity, mood, disorganization, concentration and memory than patients both at 6-months and 1-year from diagnosis. Healthy peers reported also more anxiety and depression symptoms than patients and worse past and future life perceptions than patients at 1-year from diagnosis. The clinical aim is to perform a psychological screening of preadolescents and adolescents in order to prepare ad hoc psychological interventions.

All departments in a business work separately, but for the same purpose.In this article, a system that allows not only the mechanical design department but also the manufacturing, storage, process planning, quality control, electrical design, purchasing departments, etc. to have access to the required information has been developed. Initially, current manufacturng result informations is collected from the project attandees. Secondly, a workflow is designed dependent on the current data flow. All the project stakeholders are introduced to join and use product data management system. In the absence of this kind of system, loss of time, scraps and loss of engineering time would be investigated. This allowed the company owners to be sure that no faulty revision of design will be produced after the system started. On the other hand automation of bill of materials generation provided the purchasing department correct and up to date information about outsourced parts. Allowing different engineering disciplines to work together provided more suitable environment. Gradually this conditions allowed all the departments work faster and market the new product much faster than before the system. Tracing the workflows for management purposes would be handled by the system. A ‘Validation of Design’ process is modelled for the company.

Recent studies have demonstrated silk fibroin’s ability to extend the shelf life of foods by mitigating the hallmarks of spoilage, namely oxidation and dehydration. Due to the potential for this protein to become more widespread, its safety was evaluated comprehensively. First, a bacterial reverse mutation test (Ames test) was conducted in five bacterial strains. Second, an in vivo erythrocyte test was conducted with Sprague Dawley rats at doses up to 1,000mg/kg-bw/day. Third, a range-finder study was conducted with Sprague Dawley rats at the highest consumption amount given solubility and oral gavage volume constrains (500mg/kg-bw/day). Fourth, a 28-day study in Sprague Dawley rats was conducted at the 500mg/kg-bw/day amount. Fifth, an in vitro pepsin digestion assay was performed to assess the potential for protein allergenicity. Sixth, allergenic potential was further assessed using liquid chromatography-mass spectroscopy for detection of allergenic insect proteins. Seventh, the protein sequences were subjected to bioinformatic analyses. Together, these studies raise no mutagenic, carcinogenic, toxicological, or allergenic concerns with the oral consumption of silk fibroin.

Postharvest physiological deterioration (PPD) of fresh cassava roots limits its shelf-life to about 48 hours. There is a demand for simple, cheap, and logistically feasible solutions for extending the shelf life of fresh cassava roots at industrial processes. In this study, three different types of bag materials were tested (woven polypropylene, tarpaulin, and jute as a potential storage solution for cassava roots with different levels of mechanical damages. Microclimate (temperature, humidity, CO2) was monitored to understand the storage conditions for up to 12 days. The results showed that fresh cassava roots could be stored for 8 days, with minimal PPD and starch loss (2.4 %). How-ever, roots with significant mechanical damage (cuts, breakages) had a considerably shorter shelf life in the storage bag, compare to whole roots and roots with retained peduncle (stalk where roots are connected to the main plant). Wetting the roots and type of bag material were not significant factors in determining the shelf life and starch loss. Carbon dioxide concentration in the stores significantly correlated with the starch loss in fresh cassava roots and is proposed as a possible method for continuously and remotely monitoring starch loss in large scale commercial operations and reduce postharvest losses.

Wearable cardiac sensors pave the way to advanced cardiac monitoring applications based on heart rate variability (HRV). In real-life settings, heart rate (HR) measurements are subject to mo-tion artifacts that can be timely removed from the recordings. This leads to frequent data loss in the HR signal, especially for commercial devices based on photoplethysmography (PPG). The cur-rent study had two main goals: (i) to provide a white-box quality index that estimates the amount of missing samples in any piece of HR signal; and (ii) to quantify the impact of data loss on feature extraction in a PPG-based HR signal. This was done by comparing real-life recordings from com-mercial sensors featuring both PPG (Empatica E4) and ECG (Zephyr BioHarness 3). After an out-lier rejection process, our quality index was used to isolate portions of ECG-based HR signal that could be used as benchmark, to validate the output of Empatica E4 at the signal level and at the feature level. Our results showed high accuracy for estimating the mean HR, poor accuracy for short-term HRV features and moderate accuracy for longer-term HRV features. Levels of error could be substantially reduced by using our quality index to identify time windows with few or no missing data.