This paper aims to study the surface homogenization and integrity of Ti-6Al-4V alloy by longitudinal-torsional coupled ultrasonic vibration assisted ball-end milling. A method of continuous processing between the flat surface and freeform surface connection is proposed by using ultrasonic vibration assisted ball-end precision milling, during this process, it is not necessary to exchange the cutting tool. The way has been explored for changing the homogenization of surface on Ti-6Al-4V by ultrasonic vibration-assisted milling (UVAM). Cutting experiments employing three parameters, cutting speed, feed rate and depth of cut and two types of machining forms using ball-end milling with UVAM and conventional milling (CM) respectively. The high frequency cutting force, finished surface roughness, topography and residual stresses on the surface and tool wear have been measured by advanced instruments. Particularly, adopting the high frequency cutting force measurement system, it is concluded cutting force in ball-end milling decreased significantly using UVAM as against CM. Moreover, the surface roughness by UVAM with ball-end milling is much better than the CM at a high cutting speed. However, an opposite trend is observed at a low cutting speed. Especially, there is a steep decrease from Ra 0.828 μm average value at 4000 rpm to Ra 0.129 μm average value at 5000 rpm. At the same time, the homogenization of surface roughness and residual stresses decrease significantly in UVAM as compared to which in CM when taking the transversal-longitudinal ratio into consideration. Cutting experiments and measuring results are demonstrated the validity and feasibility of UVAM with ball-end milling, and this method enjoys significant advantages compared to CM process.

In the event of an abrupt sunlight reduction scenario there is a time window that occurs between when food stores would likely run out for many countries (~6 months or less) and ~1 year when resilient foods are scaled up. A promising temporary resilient food is leaf protein concentrate (LPC). Although it is possible to extract LPC from tree biomass (e.g. leaves and needles), neither the yields nor the toxicity of the protein concentrates for humans from the most common tree species has been widely investigated. To help fill this knowledge gap, this study uses high-resolution mass spectrometry and an open source toolchain for non-targeted screening of toxins on five common North American coniferous species: Western Cedar, Douglas Fir, Ponderosa Pine, Western Hemlock, and Lodgepole Pine. The yields for LPC extraction from the conifers ranged from 1% to 7.5%. The toxicity screenings confirm that these trees may contain toxins that can be consumed in small amounts and additional studies including measuring the quantity of each toxin are needed. The results indicate that LPC is a promising candidate to be used as resilient food, but future work is needed before LPCs from conifers can be used as a wide-scale human food.

Panax notoginseng (Burk.) F. H. Chen, a valuable Chinese herb in Yunnan Province, is susceptible to leaf spot caused by Boeremia linicola. Nonetheless, effective control methods against leaf spot in P. notoginseng are lacking. We surveyed understorey P. notoginseng bases in Lincang, Lancang, and Xundian, with incidence rate reaching 80% and an average disease index of 25 in severe cases. We found that pathogenic bacteria overwinter in infected leaves and soil, with conidia and conidiophores serving as the primary infection source. The strain B. linicola LYB-2 showed the best growth at 20°C and pH 5.0. We also screened control agents using the plate and face-off culture methods. Tetramycin exhibited 38.56–74.67% inhibition with an EC50 of 0.60 mg/L. Copper abietate showed 3.10–34.76% inhibition with an EC50 of 3,120.05 mg/L. Trichoderma atroviride and T. harzianum exhibited inhibition rates of 52.48% and 44.19%, respectively, while Bacillus subtilis reached 78.45%. Field tests demonstrated significant control effects with 20% copper abresinate, B. subtilis, T. virenceae BH-10 preparation, and 0.3% tetramycin, achieving 82.57%, 72.56%, 71.3%, and 70.2% inhibition, respectively. These findings support their eco-friendly use for preventing and controlling leaf spot disease in P. notoginseng forests; we provide vital scientific evidence for disease prediction and green control strategies.

: This study focuses on optimizing chlorophyll extraction techniques and strategically placing leaf disks to enhance chlorophyll concentration in sesame (Sesamum indicum L.) leaves. Thirty sesame genotypes, categorized into light green (LG), middle green (MG), and deep green (DG) pigment groups based on leaf coloration, were selected from a larger pool of field-grown accessions. The investigation involved determining optimal SPAD value index measurements, quantifying pigment concentrations, exploring extraction solvents, and selecting suitable leaf disk positions. Significant variations in chlorophyll content were observed across genotypes, greenness categories, and leaf disk positions. The categorization of genotypes into DG, MG, and LG groups revealed a correlation between leaf appearance and chlorophyll content. The study highlighted a consistent relationship between carotenoids and chlorophyll, indicating their role in adaptation to warm environments. Examination of leaf disk positions revealed a significant chlorophyll gradient along the leaf blade, emphasizing the need for standardized protocols. Chlorophyll extraction experiments identified DMSO and 96% ethanol, particularly the later incubated for 10 minutes at 85°C, as effective choices. This recommendation considers factors like cost-effectiveness, time efficiency, safety, and environmental regulations, ensuring consistent and simplified extraction processes. For higher chlorophyll extraction, focusing on leaf tips and the 75% position along the sesame leaf blade is suggested, consistently yielding higher chlorophyll content. Our findings therefore, underscores insightful knowledge on chlorophyll gradients and encouraging for standardized protocols, that enabling researchers to refine experimental designs for precise and comparable chlorophyll measurements. Recommended solvent choices ensure reliable outcomes in plant physiology, ecology, and environmental studies.

Leaf springs are critical components for the railway vehicle safety in which they are installed. Although these components are produced in high-strength alloyed steel and designed to operate under cyclic loading conditions in the high-cyclic fatigue region, their failure is still possible to occur and hence lead to economic and human catastrophes. The aim of this document is precisely to characterise the mechanical crack growth behaviour of the 51CrV4 spring steel representative of leaf springs under cyclic conditions, that is, crack propagation in mode I. The common fatigue crack growth prediction models (Paris and Walker) considering the effect of stress ratio and parameters such as propagation threshold, critical stress intensity factor and crack closure ratio are also determined using statistical methods, which resulted in good approximations with respect to the experimental results. Lastly, the fracture surfaces under the different test conditions were analysed using SEM, with no significant differences to declare. As a result of this research work, it is expected that the developed properties and fatigue crack growth prediction models can assist design and maintenance engineers in understanding fatigue behaviour in the initiation and propagation phase of cracks in leaf springs for railway freight wagons.

The protection of grapevine from the diseases is now particularly focused on the development of environmentally friendly strategies. Although sulphur is not in itself a toxic substance, a large use towards powdery mildew, in organic vineyards especially, may cause problems to environment, health and safety of viticultural workers and plant phytotoxicity. The activity on powdery mildew of sulphur applied at doses reduced up to 50% in tank mixtures with silicates and Equisetum arvense based products, never tested on grapevine, was assessed. Two-year trials were carried out applying the products every 7-9 days in the period of greatest risk for spring ascosporic infections, in two organic vineyards in the Abruzzo region, Italy. The effectiveness towards the disease of the mixtures was demonstrated, often to a greater extent than that of full-dose sulphur, normally used in the vineyards. Furthermore, in vines treated with the mixtures, increases in yield quantity and quality, such as higher contents of soluble solids and lower levels of total acidity, have been shown. Due to the strong efficacy demonstrated on the leaves, silicon-based products + sulphur mixtures can also be recommended in eradicative applications, aimed at reducing the inoculum of the disease. The great activity of the mixtures demonstrated in this study suggests confirmation through further investigations on different cultivars and vine-growing areas at different levels of infection, also testing the effectiveness of individual silicon products against the disease.

The chloroplast is important organelle responsible for photosynthesis and various bio- synthetic functions essential to green plants. However, the regulatory mechanism of chloroplast development remains elusive. Here, we characterized a mutant with defective chloroplasts in rice (Oryza sativa L.) named it albino and lethal 13(osal13), which exhibited a distinct albino phenotype in leaves, eventually leading to seedling lethality. Molecular cloning revealed that OsAL13 encodes a novel protein in rice for which no homologous gene or known conserved domain was found. Analysis of the biological characteristics showed that the RNAi2 leaf was completely albino phenotype, the root and shoot lengths were significantly inhibited compared with wild type. Transmission electron microscopy indicated that RNAi2 were defective in chloroplast development. Overexpression of OsAL13 resulted the photosynthetic rate increase, So the total grain number per panicle also would be significantly increase. Besides, OsAL13 was located in chloroplast and constitutively expressed in various tissues, including green and non-green tissues. In addition, disruption of OsAL13 resulted in altered expression of plastid-encoded polymerases and nuclear-encoded chloroplast genes, OsAL13 also affected hormone levels in plant tissues. Therefore, our results provide new insights into the role of OsAL13 in regulating chloroplast development in rice.

Computer vision is a powerful technology that has enabled solutions in various fields by analyzing visual attributes in images. One field that has taken advantage of computer vision is agricultural automation, which promotes high-quality crop production. The nutritional status of a crop is a crucial factor in determining its productivity. This status is mediated by approximately 14 chemical elements acquired by the plant, and their determination plays a pivotal role in farm management. To address the timely identification of nutritional disorders, this study focuses on the classification of three levels of phosphorus deficiencies through individual leaf analysis. The methodological steps include: (1) generating a database with laboratory-grown maize plants that were induced to total phosphorus deficiency, medium deficiency, and total nutrition, using different capture devices; (2) processing the images with state-of-the-art transfer learning architectures (i.e. VGG16, ResNet50, GoogLeNet, DenseNet201, and MobileNetV2); and (3) evaluating the classification performance of the models using the created database. The results show that the VGG16 model achieves superior performance, with 98% classification accuracy. However, the other studied architectures also demonstrate competitive performance and are considered state-of-the-art automatic leaf deficiency detection tools. The proposed method can be a starting point to fine-tune machine vision-based solutions tailored for real-time monitoring of crop nutritional status.

Apple chlorotic leaf spot virus (ACLSV) is a widespread, deleterious and the most damaging pathogen of fruit tree plants including domesticated apple (Malus domestica) ―a great threat to apple production worldwide. The positive-sense single-stranded RNA genome of ACLSV (7.5 Kbp) encodes three proteins: RNA polymerase (Rep), movement protein (MP) and coat protein (CP). RNA interference (RNAi)-mediated antiviral innate immunity is a key sequence-specific biological phenomenon in eukaryotes to control plant viruses. The aim of this study was to analyze apple (M.domestica) locus-derived microRNAs (mdm-miRNAs) with predicted potential for targeting the ACLSV +ssRNA-encoded mRNAs, using ‘four algorithms’ approach. The ultimate goal in this research is to mobilize the in silico endogenous predicted mdm-miRNAs to trigger RNAi catalytic pathway experimentally and generate apple tree varieties for evaluating potential antiviral resistance monitoring capability and capacity for ACLSV. Experimentally validated mature apple (M.domestica, 2n = 2X = 34) mdm-miRNAs (n = 322) were acquired from miRBase database and tested for alignment with the ACLSV genome. Of the 322 targeting mature locus-derived mdm-miRNAs investigated, nine apple mdm-miRNA homologs (mdm-miR395k, mdm-miR5225c and mdm-miR7121 (a, b, c, d, e, f, g, h) were predicted by all ‘four algorithms’. Only fifty eight mdm-miRNAs were predicted consensus binding sites by union of consensus between two algorithms. The miRanda, RNA22, TAPIR algorithms predicted binding of mdm-miR395k at unique nucleotide position 4691, as the most effectively interacting mdm-miRNAs in targeting the ORF1 sequence. In order to validate target prediction accuracy, whether the apple mdm-miRNAs might bind predicted ACLSV mRNA target(s), we created an integrated Circos plot. Genome-wide in-silico-predicted miRNA-mediated target gene regulatory network validated interactions that warrant in vivo analysis. The current work provides valuable evidence and biological material for generating ACLSV-resistant apple varieties.

The few studies dealing with leaf phenological responses to elevated nutrients in forest trees have given ambiguous results, i.e., while some reported delayed leaf-out and autumn leaf senescence, others reported advanced leaf phenology caused by increased nutrition. This study aimed to determine the effects of experimentally increased phosphorus (+P) on the leaf phenologies of two juvenile provenances of common beech and sessile oak. Other objectives were to determine whether there are interspecies differences as well as intraspecies variations. Saplings were excavated in two mixed beech-oak stands and transplanted into four wooden boxes filled with a commercial soil substrate. Phosphorus fertilizer was added to two of the boxes, while the remaining boxes served as controls. Both species responded to +P treatment with advanced autumn leaf senescence in the first year of the experiment. Leaf senescence in common beech began significantly earlier, while in both species, the process was accelerated compared to that in the control. In the second year, the leaf senescence response to +P treatment was even more pronounced in both species. The +P effect on leafing phenology was absent in both common beech provenances and in an oak provenance. However, the other oak provenance showed advanced leafing, indicating the existence of intraspecies differences.

Conventional methods of crop mapping need ground truth information to train the classifier. Thanks to the frequent acquisition allowed by recent satellite missions (Sentinel 2), we can identify temporal patterns that depend on both phenology and crop management. Some of these patterns are specific to a given crop and thus can be used to map it. Thus, we can substitute ground truth information used in conventional methods with agronomic knowledge. This approach was applied to identify irrigated permanent grasslands (IPG) in the Crau area (Southern France) which play a crucial role in groundwater recharge. The grassland is managed by making three mows during the May-October period which leads to a specific temporal pattern of leaf area index (LAI). The mowing detection algorithm was designed using the temporal LAI signal derived from Sentinel 2 observations. The algorithm includes some filtering to remove noise in the signal that might lead to false mowing detection. A pixel is considered a grassland if the number of detected mows is greater than 1. A data set covering five years (2016-2020) was used. The detection mowing number was done at the pixel level and then results are aggregated at the plot level. A validation data set including 780 plots was used to assess the performances of the classification. We obtained a Kappa index ranging between 0.94-0.99 according to the year. These results were better than other supervised classification methods that include training data sets. The analysis of land-use changes shows that misclassified plots concern grasslands managed less intensively with strong intra-parcel heterogeneity due to irrigation defects or year-round grazing. Time series analysis, therefore, allows us to understand different management practices. Real land-use change in use can be observed, but long time series are needed to confirm the change and remove ambiguities with heterogeneous grasslands.

Zinc oxide (ZnO) nanoparticles (NPs) were synthesized using Rosmarinus officinalis leaf extract at 80 ° C (ZnO-80) and 180 ° C (ZnO-180). The biosynthesized ZnO NPs were characterized and their photocatalytic activity was evaluated for the degradation of methylene blue (MB) and crystal violet (CV) under sunlight irradiation. The results of the characterizations by XRD, TEM and SEM showed that the size of the NPs of ZnO-80 was smaller than that of ZnO-180 which exhibited flakier agglomerated spherical structures. Photocatalytic tests showed ZnO-80 which was prepared by a cheap and easy procedure compared to ZnO-180 effectively degrades MB and CV dyes under sunlight. The superior performance of ZnO-80 over ZnO-180 can be explained by the differences in their textural properties. This is because ZnO-80 has a smaller crystallite size, a specific surface area and a higher pore volume than ZnO-180. Fourier-transform infrared spectroscopy (FTIR) analyzes revealed that both samples contained an adsorbed carboxylate group (COO-), and accordingly a mechanism was proposed for the formation of ZnO NPs that include the carboxyl group.

Cocoa is an important commodity crop not only to produce one of the most complex products such as chocolate from the sensory perspective, but one that commonly grows in developing countries close to the tropics. This paper presents novel techniques applied using cover photography and a novel computer application (VitiCanopy) to assess the canopy architecture of cocoa trees in a commercial plantation in Queensland, Australia. From the cocoa trees monitored, pod samples were collected, fermented, dried and grinded to obtain the aroma profile per tree using gas chromatography. The canopy architecture data were used as inputs in an artificial neural network (ANN) algorithm and the aroma profile considering six main aromas as targets. The ANN model rendered high accuracy (R = 0.82; MSE = 0.09) with no overfitting. The model was then applied to a satellite image from the whole cocoa field studied to produce canopy vigor and aroma profile maps up to the tree-by-tree scale. The tool developed could aid significantly the canopy management practices in cocoa trees that have a direct effect on cocoa quality.

This study evaluated the impact of the level of supplementation of Moringa oleifera leaves on the nutritional (proximate, mineral and vitamin content) as well as on the antioxidant capacities of smoothies made from a blend of pineapple, banana and apple. The beverage (smoothies) were supplemented with Moringa oleifera leaves at 1.5, 3.0 and 4.5% levels and evaluated for proximate, antioxidant (ferric reducing antioxidant power, FRAP and 2,2-Diphenyl-1-picryhydrazy, DPPH), mineral, vitamin, physicochemical and quality acceptability. The results showed that the moisture content of the beverage ranged between 49.24 – 78.62%, total ash: 1.01 – 9.71, crude fiber: 5.14 – 9.39%, crude fat: 0.72 – 1.86%, crude protein: 5.47 – 19.37% and carbohydrate: 3.65 – 16.99%. Calcium (12.03 -15.53) and potassium (17.22 -25.38) were the predominant mineral elements when compared to magnesium (1.51 – 3.05) mg/L. The vitamin contents ranged between 2.5 – 10.8 and 0.15 – 0.93 mg/L for vitamin C and E, respectively. Total phenolic contents ranged between 4.68 – 6.18 mg/ml while the total flavonoid contents ranged between 0.01 – 0.14 mg/ml. The radical scavenging abilities (DPPH) of the samples ranged between 16.05 – 88.77% while the ferric reducing antioxidant power (FRAP) ranged between 0.38 – 7.36 mg/ml. The brix values showed high sugar contents (15 – 18%) while the pH results showed that the sample was almost neutral at a range between 6.3 and 6.5. The overall quality (sensory) acceptability of the different quality parameters evaluated indicated that the control sample was more preferred. While supplementation with Moringa oleifera leaves significantly affected the sensory parameters, its addition nevertheless offers a potential avenue to obtain additional nutrients besides its improved antioxidative properties.

In this paper, low circumferential reciprocating load foot-scale tests were performed on two truncated PHC B 600 130 tubular piles with bearing nodes to characterize the damage process and morphology of the specimens and to investigate the load-carrying performance of the members. The test results reveal that under the action of tensile-bending-shear loading, the bearing concrete in the node area buckles and is damaged, the anchored reinforcement in the node area yields, the constraint is weakened, an articulation point is formed, and the node rotational capacity increases. When the embedment depth increases from 200 mm to 300 mm, the ultimate bearing capacities of the positive and negative nodes increase by 57.60% and 54.60%, respectively. A numerical simulation is used to verify the test results. Considering the three types of piles with truncated nodes, the numerical simulation is used to analyze the node-bearing capacity at different embedment depths. Finally, two preferred node types are proposed as follows: pipe pile core-filled longitudinal reinforcement anchored into the bearing node and pipe pile body longitudinal reinforcement anchored into the bearing node + pipe pile core-filled longitudinal reinforcement anchored into the bearing node, with preferred embedment depths of 350 mm and 200 mm, respectively.

Abstract: Field studies with large-stemmed plants Artemisia dubia (wormwood) have been carried out at Vėžaičiai Branch LAMMC since 2018. According to three years of experimental results, annual dry matter (DM) yield varied from 7.94 to 10.14 t ha-1. Growing conditions, nitrogen ap-plication level and harvesting time had significant impacts on Artemisia dubia productivity. This article presents the results of research on preparation and use of Artemisia dubia biomass for en-ergy conversion and evaluation of technological-technical and environmental parameters of these plants utilization for solid biofuel. For experiments were used 6 variants of Artemisia dubia samples, which were grown in 2021: plants were cut three times and two fertilization options were used: (1) no fertilization and (2) fertilization with 180 kg ha-1 of nitrogen fertilizer. These harvested plants were chopped, milled and were pressed into the pellets. The physi-cal-mechanical characteristics (mоisture content, density and strength) of Artemisia dubia pellets were investigated. During this study, it was found that the density in dry mass (DM) of pellets ranged from 1119.86 to 1192.44 kg m-3. The pellet moisture content ranged from 8.80 to 10.49%. After testing of pellet strength, it was found that the pellets which were made from plant bio-mass PK-1-1, were the most resistant to compression, they withstood 560.36 N of pressure. Dry fuel lower heating value (LHV) of pellets was sufficiently high and was very close to pine saw-dust pellets, it varied from 17.46±0.25 MJ kg-1 to 18.14±0.28 MJ kg-1. The ash content of burned pellets ranged from 3.62±0.02% to 6.47±0.09%. Emissions of harmful pollutants – CO2, CO, NOx and unburnt hydrocarbons (CxHy) did not exceed the maximum permissible levels. Summariz-ing the results of investigated properties, cоmbustion and emissiоns of Artemisia dubia pellets, it can be concluded that this biofuel can be used for production of pressed biofuel and it is charac-terized by sufficient high quality, efficient combustion and permissible emissions to the envi-ronment.

We conducted the meander evolution experiments incorporating the effects of riparian vegetation and the series of upper vortex flow disturbances induced by a scour pit simultaneously. Two employed nonlegume plants with salinity and alkalinity resistance, had uniform degrees of seedling normal growth and different lengths of root networks. Our results show that riparian vegetation in general can consolidate the single-thread channel planform without branching outward under the flooding flow conditions. Transverse point bars on inner banks were instead by downstream scroll bars in overall channel for long, unless the coupling of riparian vegetation and flood scour. Shallow-rooted plant was inadequate to resist the inner-bank cutting effect brought by the upper vortex flow. Deep-rooted plant can stabilize the bank-lines and thalweg significantly, but that was susceptible to locally low vegetation coverage. Using evolutionary spectral analysis based on thalweg, we found streamwise high-frequency distribution of bed topography mainly concentrated downstream the bifurcation interface in unvegetated scenario when faced with a flood, shrank to the upper isolated turning interface in shallow-rooted scenario, and conversely stood out along the bare roots disturbed region in deep-rooted scenario. This experimental study expands a much wider understanding of vegetation effects in hydro-bio-geomorphological systems engineering.

Despite several attempts by governments and non-governmental organizations to eliminate female genital mutilation or cutting, it is puzzling that this traditional procedure is widely practiced today in many parts of sub-Saharan Africa (SSA). Scholarly arguments on the influence of female genital mutilation on sexual behavior up until now remain inconclusive. The current study sought to examine the association between female genital mutilation and early sexual initiation among girls and young women (AGYW) in SSA. Data from Demographic and Health Surveys (DHS) of 12 SSA countries were combined. A total of 30,089 AGYW (15-24 years) who had ever had sex and had complete information on all the variables of interest were considered. The outcome variable for the study was early sexual initiation. The study employed multilevel logistic regression for the data analysis, with reported odds ratio and associated 95% confidence intervals (CIs). The overall prevalence of female genital mutilation among AGYW was 49.9%, with the highest and lowest prevalence in Guinea (95.8%) and Togo (3.3%) respectively. The prevalence of early sexual initiation was 42.4%, with the highest and lowest prevalence in Niger (59.9%) and Burkina Faso (30.6%) respectively. AGYW who had not experienced female genital mutilation were less likely to have early sexual initiation [OR= 0.74, CI= 0.70-0.78], compared to those who had experienced female genital mutilation, after controlling for significant covariates. The likelihood of early sexual initiation was high among AGYW aged 15-19 [OR=2.38, CI=2.26-2.51] but low among AGYW with secondary education [AOR=0.58, CI=0.54-0.63], those who had never married [OR=0.68, CI=0.60-0.78], those in households with richest wealth quintile [OR=0.64, CI=0.57-0.72], those who were exposed to mass media [OR=0.88, CI=0.83-0.93], and those working [OR=0.91, CI=0.87-0.96]. Not undergoing female genital mutilation in the midst of socio-economic factors (e.g., education level, household wealth) could limit AGYW from early sexual debut. These findings underscore the need for effective campaign and programs (e.g., educational programs, entrepreneurial training, micro-finance schemes) against the practice of female genital mutilation. Policy interventions (e.g., “schooling for the girl-child” initiatives) that might delay early sexual initiation among adolescent girls and young women in the midst of identified socio-economic factors should be developed.

Pepper leaf segmentation plays a crucial role in monitoring pepper leaf diseases in various backgrounds and ensuring the healthy growth of peppers. However, existing transformer-based segmentation methods suffer from computational inefficiency, excessive parameterization, and limited utilization of edge information. To tackle these challenges, we propose an adaptive multi-scale MLP framework, named AMS-MLP, which combines the multi-path aggregation module (MPAM) and the multi-scale context relation mask module (MCRD) to refine the object boundaries in pepper leaf segmentation. AMS-MLP consists of an encoder-based network, an adaptive multi-scale MLP (AM-MLP) module, and a decoder network. In the encoder network, the MPAM module effectively fuses five-scale features to generate a single-channel mask, improving the accuracy of pepper leaf boundary extraction. The AM-MLP module divides the input features into two branches: the global multi-scale MLP branch captures long-range dependencies between image information, while the local multi-scale MLP branch focuses on extracting local feature maps. Adaptive attention mechanism is designed to dynamically adjust the weights of global and local features. The decoder network incorporates the MCRD module into the convolutional layer, enhancing the extraction of boundary features. To verify the performance of the proposed method, we conducted extensive experiments on three pepper leaf datasets with different backgrounds. The results demonstrate mIoU scores of 97.39%, 96.91%, and 97.91%, as well as F1 scores of 98.29%, 97.86%, and 98.51%, respectively. Comparative analysis with U-Net and state-of-the-art models reveals that the proposed method dramatically improves the accuracy and efficiency of pepper leaf image segmentation.

To date the role of green leaf volatiles has been mainly constrained to their role in protecting plants against pests and pathogens. However, increasing evidence suggests that among the stresses that can significantly harms plants, GLV can also provide significant protection against an array of those including heat, cold, drought, light, and salinity. But while the molecular basis for this protection is still largely unknown, it seems obvious that a common theme in the way GLV work is that most if not all of these stresses are associated with physical damage to the plants, which in turn is the major event responsible for the production of GLV. Here, I summarize the current state of knowledge on GLV and abiotic stresses and provide a model that explains the multifunctionality of these compounds.

Cercospora beticola Sacc. is an ascomycete pathogen that causes Cercospora leaf spot in sugar beets (Beta vulgaris L.) and other related crops. The disease symptoms are characterized by circular lesions with an ash-gray centre and dark brown to purple margins on the leaves. It can lead to significant yield losses if not effectively managed. This study aims to characterize and assess the impact of bacterial biological control agents against C. beticola. Following a dual-culture screening, 18 bacteria exhibiting over 50% inhibition were selected, with six of them demonstrating more than 80% control. Identification of the bacteria was carried out through sequencing of the16S rDNA, revealing potentially 12 species belonging to six genera including Bacillus which was represented by four species. Additionally, the bacteria underwent in-depth characterization of biochemical and molecular properties, as well as plant-growth promotion. PCR detection of genes responsible for producing antifungal metabolites revealed that 83%, 78%, 89%, and 56% of the selected bacteria possessed the bacillomycin, iturin, fengycin, and surfactin encoding genes, respectively. Infrared spectroscopy analysis confirmed the presence of lipopeptide structure in the bacteria supernatant filtrate. Subsequently, the bacteria were assessed for their effect on sugar beet plants in controlled conditions. The bacteria exhibited notable capabilities, promoting growth in both roots and shoots, resulting in significant increases in root length, weight, and shoot length. The field experiment with four bacterial candidates demonstrated good performance against C. beticola compared to difenoconazole fungicide. These bacteria played a significant role in disease control, achieving a maximum efficacy of 77.42%, slightly below the 88.51% efficacy attained by difenoconazole. Additional field trials are necessary to verify the protective and growth-promoting effects of these candidates, whether applied individually, combined in consortia, or integrated with chemical inputs in sugar beet crop production.

Drought stress is a major production constraint in crops globally. Crop wild relatives are important source of resistance and tolerance for both biotic and abiotic stresses, respectively. A breeding program was initiated to introgress drought tolerance in sunflower through hybridization between the wild species Helianthus argophyllus and the cultigen pool of H. annuus. Selection was carried out in the F2 to F5 segregating populations for high cuticular waxes, smaller leaf area, single heading and high oil content. The selected F5 breeding lines were compared with non-adapted elite sunflower germplasm in a replicated randomized complete block research project using different water treatments comparing fully irrigated (T0), with 75 (T1), 50 (T2) and 25% (T3) irrigation treatments. The comparison between the two types of germplasm showed that drought tolerant breeding lines had comparatively lesser decreases in leaf area, shoot weight and root shoot ratio 10 under the various drought treatments. Leaf area of the drought selected F5 lines were smaller than that of the elite germplasm under controlled irrigated treatments, but they maintained their leaf area under the drought treatments. Several drought resistant promising lines D-2, D-5, and D-27 were identified and showed high leaf area, great root length and increase root to shoot ratio under the highest stressed treatments (T3). Some of the lines could be directly used for the development of drought tolerant hybrids. Combining ability test indicated D-27 (F7) as good general combiner for seed yield plant−1 and oil contents when mated with male line RSIN.82. These hybrids could help to minimize seed yield losses due to water stress and to achieve profitable cultivation of sunflower in 18 arid regions of Pakistan.

The production of coffee leaf tea (Coffea arabica) in El Salvador and the influences of processing steps on non-volatile compounds and volatile aroma-active compounds were investigated. The tea was produced according to process steps of conventional tea (Camellia sinensis) with available possibilities on the farm. Influencing factors were the leaf type (old, young, yellow, shoots), processing (blending, cutting, rolling, freezing, steaming), drying (sun drying, oven drying, roasting) and fermentation (wild, yeast, Lactobacillus). Subsequently, the samples were analysed for the maximum levels of caffeine, chlorogenic acid, and epigallocatechin gallate permitted by the European Commission. The caffeine content varied between 0.37 g/100 g dry mass (DM) and 1.33 g/100 g DM, the chlorogenic acid between not detectable and 9.35 g /100 g DM and epigallocatechin gallate could not be detected at all. Furthermore, water content, essential oil, ash content, total polyphenols, total catechins, organic acids, and trigonelline were determined. Gas chromatography—mass spectrometry-olfactometry and calculating of the odour activity values (OAVs) were carried out to determine the main aroma-active compounds, which are β-ionone (honey-like, OAV 132-927), decanal (citrus-like, floral, OAV 14-301), α-ionone (floral, OAV 30-100), (E,Z)-2,6-nonadienal (cucumber-like, OAV 18-256), 2,4-nonadienal (melon-like, OAV 2-18), octanal (fruity, OAV 7-23), (E)-2 nonenal (citrus-like, OAV 1-11), hexanal (grassy, OAV 1-10), and 4-heptenal (green, OAV 1-9).

Multi- and hyper-spectral, multi-angular top-of-canopy reflectance data call for an efficient retrieval system which can improve the retrieval of standard canopy parameters (as albedo, LAI, fAPAR), and exploit the information to retrieve additional parameters (e.g. leaf pigments). Furthermore consistency between the retrieved parameters and quantification of uncertainties are required for many applications. % (2) methods We present a retrieval system for canopy and sub-canopy parameters (OptiSAIL), which is based on a model comprising SAIL, PROSPECT-D (leaf properties), TARTES (snow properties), a soil model (BRDF, moisture), and a cloud contamination model. The inversion is gradient based and uses codes % created by Automatic Differentiation. The full per pixel covariance-matrix of the retrieved parameters is computed. For this demonstration, single observation data from the Sentinel-3 SY_2_SYN (synergy) product is used. The results are compared with the MODIS 4-day LAI/fPAR product and PhenoCam site photography. OptiSAIL produces generally consistent and credible results, at least matching the quality of the technically quite different MODIS product. For most of the sites, the PhenoCam images support the OptiSAIL retrievals. The system is computationally efficient with a rate of 150 pixel per second (7 millisecond per pixel) for a single thread on a current desktop CPU using observations on 26 bands. Not all of the model parameters are well determined in all situations. Significant correlations between the parameters are found, which can change sign and magnitude over time. OptiSAIL appears to meet the design goals, puts real-time processing with this kind of system into reach, seamlessly extends to hyper-spectral and multi-sensor retrievals, and promises to be a good platform for sensitivity studies. The incorporated cloud and snow detection adds to the robustness of the system.

This study aims to assess the potential of the LDAS-Monde a land data assimilation system developed by Météo-France to monitor the impact of the 2018 summer heatwave over western Europe vegetation state. The LDAS-Monde is forced by the ECMWF’s (i) ERA5 reanalysis, and (ii) the Integrated Forecasting System High Resolution operational analysis (IFS-HRES), used in conjunction with the assimilation of Copernicus Global Land Service (CGLS) satellite derived products, namely the Surface Soil Moisture (SSM) and the Leaf Area Index (LAI). Analysis of long time series of satellite derived CGLS LAI (2000-2018) and SSM (2008-2018) highlights marked negative anomalies for July 2018 affecting large areas of North Western Europe and reflects the impact of the heatwave. Such large anomalies spreading over a large part of the considered domain have never been observed in the LAI product over this 18-yr period. The LDAS-Monde land surface reanalyses were produced at spatial resolutions of 0.25°x0.25° (January 2008 to October 2018) and 0.10°x0.10° (April 2016 to December 2018). Both configuration of the LDAS-Monde forced by either ERA5 or HRES capture well the vegetation state in general and for this specific event, with HRES configuration exhibiting better monitoring skills than ERA5 configuration. The consistency of ERA5 and IFS HRES driven simulations over the common period (April 2016 to October 2018) allowed to disentangle and appreciate the origin of improvements observed between the ERA5 and HRES. Another experiment, down-scaling ERA5 to HRES spatial resolutions, was performed. Results suggest that land surface spatial resolution is key (e.g. associated to a better representation of the land cover, topography) and using HRES forcing still enhance the skill. While there are advantages in using HRES, there is added value in down-scaling ERA5, which can provide consistent, long term, high resolution land reanalysis. If the improvement from LDAS-Monde analysis on control variables (soil moisture from layers 2 to 8 of the model representing the first meter of soil and LAI) from the assimilation of SSM and LAI was expected, other model variables benefit from the assimilation through biophysical processes and feedbacks in the model. Finally, we also found added value of initializing 8-day land surface HRES driven forecasts from LDAS-Monde analysis when compared with model only initial conditions.

The feasibility of recovering bioactive antioxidants from Phyllantus emblica leaves using ethanol -water mixture (0 – 100%) and heat-assisted extraction technology (HAE-T) was investigated in this present study. To this effect, the process parameter of operating temperature (OT: 30 -50 oC), solid -to-liquid ratio (S:L: 1:20 - 1:60 g/mL) and extraction time (ET: 45 - 180 min) were investigated on the extract total phenolic content (TPC, mg GAE/g d.w), yield (EY, %) and antioxidant activity (μM AAE/g d.w) by employing the Box-Behnken experimental design (BBD) available in response surface methodology (RSM). Multi-objective process optimization using the desirability function algorithm to determine set of process variables that simultaneously optimize process responses of TPC, EY and AA was also investigated. The recovery process was thereafter modeled with BBD-RSM and multi gene genetic programming (MGGP) algorithm and model reliability assessment via Monte Carlo simulation were conducted for the best performing set of models for predicting TPC, EY and AA values. The HPLC characterization of the recovered extract was carried out to ascertain the phenolic compound constituents of the Phyllantus emblica leaf extract. The 50% ethanol solution was found to be the best for the optimal extraction of antioxidants from Phyllantus emblica leaves. The HAE-T was suitable for recovering bioactive extract from Phyllantus emblica leaves and investigated process parameters have impacts on the recovery process. The process parameters that simultaneously gave the optimum EY of 21.6565%, TPC of 67.116 mg GAE/g and AA of 3.68583 µM AAE/g were OT of 41.61 oC, S:L of 1:60 g/mL and ET of 180 min. The HPLC extract profiling revealed that the bioactive constituents present in the recovered extract were betulinic acid, gallic acid, chlorogenic acid, caffeic acid, ellagic acid, and ferulic acid. Both the developed BBD-RSM and evolved MGGP-based models predicted the observed process response of TPC, EY and AA satisfactorily with BBD-RSM models marginally better in their predictions. The reliability results showed that the BBD-RSM models predicted TPC, EY and AA values with high certainty of 99.985%, 97.569% and 98.661%, respectively.

This study explores an eco-friendly approach to synthesizing silver nanoparticles (AgNPs) using soybean leaf extracts, employing a reaction with silver nitrate at 65°C for 2.5 h. Optimal results were achieved at extract concentrations of 3.12 and 6.25 mg leaf mL-1, termed 3.12AgNP and 6.25AgNP, respectively. UV-Vis spectrophotometric analysis between 350-550 nm exhibited a peak at 410-430 nm, along with a color transition in the suspensions from pale yellow to brown, indicating successful synthesis. Dynamic light scattering (DLS) further delineated favorable properties of these AgNPs, including nanometric dimensions (73–104 nm), negative charge, and moderate polydispersity, portraying stable and reproducible synthesis reactions. The bioreduction mechanism, possibly expedited by leaf extract constituents such as amino acids, phenolic acids, and polysaccharides, remains to be fully elucidated. Notably, the study underscored the potent nematicidal effectiveness of the biosynthesized AgNPs, especially 6.25AgNP, against Pratylenchus brachyurus, a common plant parasitic nematode in tropical soybean cultivation regions. In vitro tests illustrated significant nematicidal activity at concentrations above 25 µmol L-1, while in vivo experiments displayed pronounced nematode population diminishment in plant roots, particularly with a 6.25AgNP rhizosphere application at concentrations of 500 µmol L-1 or twice at 250 µmol L-1, attaining a reproduction factor below 1 without any morphological nematode alterations. The research highlights the potential of 6.25AgNPs derived from soybean leaf extracts in forging sustainable nematicidal solutions, marking a significant stride towards eco-friendly phytonematode management in soybean cultivation. This novel methodology signals a promising avenue in harnessing botanical resources for nematode control, propelling a greener agricultural horizon.

Main pathogens affecting carob (Ceratonia siliqua) tree in the Mediterranean basin are described in this overview. The most widespread diseases periodically occurring on carob orchards are powdery mildew (Pseudoidium ceratoniae) and cercospora leaf spot (Pseudocercospora ceratoniae). The causal agents of so-called “black leaf spots” (e.g. Pestaliotiopsis, Phyllosticta and Septoria spp.) are responsible for similar symptoms to above mentioned foliar diseases but are reported on carob orchards with a negligible frequency. Likewise, canker and branch diebacks caused by fungal species belonging to Botryosphaeriaceae are almost never recorded. Among wood diseases that may compromise old or previously damaged carob specimens, “brown cubical heart rot” caused by Laetiporus sulphureus is the most widespread and recurrent issue; this pathogen is also well-known for edible fruit bodies that are also appreciated for pharmaceutical and industrial purposes. On the other hand, “white decays” caused by Fomes and Ganoderma species are less common and reported for the first time in this review. Like-gall protuberances on twigs at uncertain aetiology or tumours on branches associated to Rhyzobium radiobacter are described although these symptoms are seldom detected as it happens also for necrotic leaf spots caused by Pseudomonas syringae pv. ciccaronei. A list of worldwide pathogens not yet recorded but at high-risk potential of introduction in Italian carob producing area is also provided. Finally, some concerns are addressed to new phytopathogenic fungi vectored by invasive Xylosandrus compactus ambrosia beetle. Comprehensively, all described pathogens could potentially in near future become limiting factors for carob production, because they could be favoured by high-density orchards, increasing global network of trade exchanges and high frequency through which extreme events of climate changes globally occur. Thus, symptoms and signs, causal agents, epidemiology and whenever applicable recommendations for disease prevention and management are provided in this review.

The cultivation of Hevea brasiliensis, the primary commercial source of natural rubber, is strongly impacted by South American Leaf Blight (SALB) disease, caused by the fungus Pseudocercospora ulei. Various management strategies have been implemented, including the selection of resistant genotypes and the identification of escape zones. This study evaluated the growth, early yield, and resistance to SALB of nine Colombian elite genotypes from the ECC-100 series and IAN 873 clone (control) in a large-scale clone trial in a low SALB pressure zone in the Colombian Amazon, 2017 - 2020. Favorable early performance was evident, although there was a significant increase in the severity and sporulation of P. ulei over time, especially in the ECC 35, ECC 60, and IAN 873 genotypes. However, these scores represented a low susceptibility. Genotypes with higher resistance to SALB demonstrated greater growth and early yield compared to higher susceptible genotypes. The ECC 64, ECC 73, ECC 90, ECC 25, and ECC 29 genotypes were more desirable in low SALB pressure zones due to their higher resistance and early performance. It is important to highlight that this research contributes to the selection of new SALB-resistant Colombian genotypes of H. brasiliensis in the growth stage. Therefore, it is necessary to evaluate their productivity in the mature stage and long-term resistance to SALB, before recommending and promoting their commercial adoption in the Colombian Amazon.

This study discusses the experimental assessment of the in-plane mechanical behavior of a multi-leaf stone masonry wall built from cut stone and reinforced with metal connectors (cramps and dowels). The wall, inspired by conventional multi-leaf stone walls, is meant for use in modern stone masonry buildings. The wall is constructed from two parallel load-bearing walls with a cavity between them, which aims to conceal the installation and insulation needed in modern buildings. The load-bearing walls are connected with cramps and dowels at certain intervals so that the wall works as a single section against horizontal and vertical loads. To characterize the in-plane behavior of the proposed wall, compressive, triplet, and diagonal compression tests were conducted to investigate the compressive strength, shear strength, modulus of elasticity, stiffness, ductility, and energy absorption of the wall. Compared with dry and mortar joint walls, the use of dowels increased the initial shear capacity of the wall by 11 and 19 times, respectively. The application of cramps without curving channels inside the individual stone elements decreased the compressive strength by 18%. The energy absorption of the designed walls with metal connectors was substantially increased to that of the specimens representing conventional stone walls. The results obtained show the applicability of the wall due to its higher shear strength and minimal drop in compressive strength, which is within acceptable limits.

The current neural networks for tomato leaf disease recognition have problems such as large model parameters, long training time, and low model accuracy. To solve these problems, a lightweight convolutional neural network LBFNet is proposed in this paper.First, a lightweight convolutional neural network LBFNet is established as the base model. Secondly, a three-channel attention mechanism module is introduced to learn the disease features in tomato leaf disease images and reduce the interference of redundant features. Finally, a cascade module is introduced to increase the depth of the model, solve the gradient descent problem, and reduce the loss caused by increasing the depth of the model. The quantized pruning technique is also used to further compress the model parameters and optimize the model performance. The results show that the LBFNet model achieves 99.06% accuracy on the LBFtomato dataset, with a training time of 996s and a single classification accuracy of over 94%. Further training using the saved weight file after quantized pruning makes the model accuracy reach 97.66%. Compared with the base model, the model accuracy was improved by 28%, and the model parameters were reduced by 96.7% compared with the traditional Resnet50. It was found that LBFNet can quickly and accurately identify tomato leaf diseases in complex environments, providing effective assistance to agricultural producers.

Variability in traits forming the Leaf Economics Spectrum (LES) among and within crop species play a key role in governing agroecosystem processes. However, studies evaluating the extent, causes, and consequences of within-species variation in LES traits for some of the world’s most common crops remain limited. We quantified variation in nine leaf traits measured across 90 vines of five wine grape (Vitis vinifera) varieties at two ontogenetic stages. Grape traits covary along an intraspecific LES, in patterns similar to those documented in wild plants. Across varieties, high rates of photosynthesis (A), and leaf nitrogen (N) concentrations, are coupled with low leaf mass per area (LMA), while the opposite suite of traits defines the “resource conserving end” of this intraspecific LES in grape. Variety identity predicted of leaf physiological (A) and morphological traits (i.e., leaf area and leaf mass), while leaf chemical traits and LMA were best explained by ontogenetic stage. All varieties expressed greater resource conserving trait syndromes (i.e., higher LMA, lower N, lower Amass) later in the growing season. Traits related to leaf hydraulics, including instantaneous water-use efficiency (WUE), were unrelated to LES and other resource capture traits, and were better explained by spatial location. Our results highlight the relative contributions of genetic vs. phenotypic factors in structuring this variation and point to a key role of domestication in governing trait relationships in the world’s crops.

The horse chestnut leaf miner Cameraria ohridella (Lepidoptera: Gracillariidae) is an invasive pest of horse chestnut and has spread through Europe since 1985. The horse chestnut leaf blotch Guignardia aesculi (Botryosphaeriales: Botryosphaeriaceae) is a fungal disease that also seriously damages horse chestnut trees in Europe. The interaction between the leaf miner and the fungus has not yet been sufficiently described. Therefore, the aim of the present study was to assess leaf damage inflicted to horse chestnut by both C. ohridella and G. aesculi during the vegetation season and to model their interaction. The damage to leaf area was measured monthly from May to September 2013 in České Budějovice, the Czech Republic. A simple phenomenological model describing the expected dynamics of the two species was developed. The study revealed a significant effect of sampling site and sampling period on the damage caused by both the pest and the fungus. The mathematical model indicates that infestation by C. ohridella is more affected by G. aesculi than vice versa. The possible mechanisms affecting the relationship between G. aesculi and C. ohridella are discussed.

The production and quality of Phaseolus vulgaris (snap bean) have been negatively impacted by leaf crumple disease caused by two whitefly-transmitted begomoviruses; cucurbit leaf crumple virus (CuLCrV) and sida golden mosaic Florida virus (SiGMFV), which often appear as a mixed infection in Georgia. Host resistance is the most economical management strategy against whitefly-transmitted viruses. Currently, information is not available with respect to resistance to these two viruses in commercial cultivars. In two field seasons (2018 and 2019), we screened Phaseolus sp. genotypes (n = 84 in 2018; n = 80 in 2019; most of the genotypes were common in both years with a few exceptions) for resistance against CuLCrV and/or SiGMFV. Twenty genotypes with high- to moderate-levels of resistance (disease severity ranging from 5-50%) to CuLCrV and/or SiGMFV were identified. Twenty-one genotypes were found to be highly susceptible with a disease severity of ≥66%. Adult whitefly counts differed significantly among snap bean genotypes for both years. The whole genome of these Phaseolus sp. (n=82) genotypes was sequenced and genetic variability among them was identified. Over 900 giga-base (Gb) of filtered data were generated and >88% of the resulting data were mapped to the reference genome, and SNP and Indel variants in Phaseolus genotypes were obtained. A total of 645,729 SNPs and 68,713 Indels including 30,169 insertions and 38,543 deletions were identified, which were distributed in 11 chromosomes with chromosome 02 harboring the maximum number of variants. These phenotypic and genotypic information will be helpful in genome-wide association studies that will aid in identifying genetic basis of resistance to these begomoviruses in Phaseolus sp.

Primocane-fruiting (PF) blackberries are adaptable to different production systems. To increase yields in PF blackberries, their primocanes are typically tipped or topped in summer to encourage branch formation from axillary buds below the cut. In this study, we determined in PF ‘Prime-Ark Traveler’ whether early emerging primocanes were more productive than those that emerged later in the season and the effect of primocane bending and defoliation on flowering. The primocanes that emerged in April produced 64% more flower shoots than those that emerged after May. Also, these findings indicate the alternative primocane management practices of selecting the early emerging primocanes and bending to orient primocanes horizontally and leaf removal increase budbreak and flower shoot emergence. The present work contributes toward a better understanding of primocane emergence time and orientation-flowering relations and how they mediate crop performance in PF blackberry.

High-precision conical threads are widely used in responsible joints in the drilling of oil and gas wells. Difficult underground drilling conditions due to the occurrence of significant mechanical loads and an aggressive environment in wells require the use of workable materials that are often difficult to machine. The huge need for such connections dictates the use of high-performance cutting tools, which means that high demands are placed on their effective geometric performance. The study describes the theoretical dependence of the profile precision of the tapered drill-string tool-joint threads of all standard sizes on the complex of a cutting tool geometric parameters and cutting tool setting accuracy. The experiments include an assessment of the geometric accuracy of the profile of the obtained NC23 thread connector, depending on the values of the installation angles and the declared tangential displacement of the standard threaded carbide insert.

Currently, the majority of industrial metal processing involves the use of taps for cutting. However, existing tap machines require relocation to specialized inspection stations and only assess the con-dition of the cutting edges for defects. They do not evaluate the quality of the cutting angles and the amount of removed material. Machine vision, a key component of smart manufacturing, is com-monly used for visual inspection. Taps are employed for processing various materials. Traditional tap replacement relies on the technician's accumulated empirical experience to determine the ser-vice life of the tap. Typically, inspecting tooth wear involves removing the tap and evaluating the degree of wear to determine if regrinding or replacement is necessary. Therefore, we propose the use of visual inspection of the tap's external features to determine whether replacement or regrinding is needed. We examined the bearing surface of the tap and utilized single images to identify the cutting angle, clearance angle, and cone angles. By inspecting the side of the tap, we calculated the wear of each cusp. We further investigated whether the cutting portion affected the length of the tool by measuring changes in tooth surface area and the amount of removed thread. This inspection process can facilitate the development of a tap life system, allowing for the estimation of the durability and wear of taps and nuts made of different materials. Statistical analysis can be employed to predict the lifespan of taps in production lines.

Rice production in the Anhui province is threatened by fungal diseases. We obtained twenty-five fungal isolates from rice and wild-rice leaves showing leaf spot disease collected along the Yangtze River. A phylogenetic analysis based on internal transcribed spacer (ITS), translation elongation factor 1 alpha (TEF1-α), and beta tubulin (TUB2) sequences revealed that one isolate (SS-2-JB-1B) grouped with Nigrospora shaerica, one (QY) with Nigrospora chinensis, twenty-two with Ngrospora oryzae, and one strain (QY-2) grouped in its own clade, related to but clearly different from N. oryzae. Nineteen tested isolates including sixteen strains from the N. oryzae clade and the three isolates of the other three clades, caused disease on detached rice leaves. The three isolates that did not belong to N. oryzae were also able to cause disease on rice seedlings, suggesting that they were rice pathogens. Isolate QY-2 differed from the other isolates in terms of colony mor-phology, cell-size, and susceptibility to fungicides, indicating that this isolate represents a new species that we named Nigrospora anhuiensis. Our analysis showed that N. sphaerica, N. chinensis, and the new species N. anhuiensis can cause rice leaf spot disease in the field. This research pro-vides new knowledge for understanding rice leaf spot disease.

One of the key pathogenetic links of type 2 diabetes mellitus (T2DM) is the formation of insulin resistance (IR). Besides a wide selection of synthetic antidiabetic drugs, various plant-origin extracts are also available to support the treatment of T2DM. This study aimed to investigate and gain knowledge of the chemical composition and potential IR correction effect of American cranberry (Vaccinium macrocarpon Aiton) leaf extracts and formulate novel 3D-printed oral dosage forms for such extracts. The bioactivity and IR of L-arginine-loaded cranberry leaf extracts were studied in vivo in rats. The cranberry leaf extracts consisted of quinic, 3-caffeoylquinic (chlorogenic), p-coumaroylquinic acids, quercetin 3-O-galactoside, quercetin-3-O-glucoside, quercetin-3-xyloside, quercetin-3-O-arabino-pyranoside, quercetin-3-O-arabinofuranoside, quercetin 3-O-rhamnoside and quercetin-O-p-coumaroyl-hexoside-2 identified by HPLC. In-vivo studies with rats showed that the oral administration of the cranberry leaf extracts had a positive effect on insulin sensitivity coefficients under ITT test, and affected HOMA-IR levels and liver lipid content with experimental IR. A novel 3D-printed immediate-release dosage form was developed for the oral administration of cranberry leaf extracts using polyethylene oxide (PEO) as a carrier gel in a semi-solid extrusion (SSE) 3D printing. In conclusion, American cranberry leaf extracts loaded with L-arginine could find uses in preventing health issues associated with IR.

Agriculture is one of the indispensable fields for the survival of mankind. Potatoes also have a significant role in the field of agriculture. The quality and quantity of potatoes are significantly impacted by several diseases, such as early blight and late blight, and manual interpretation of these leaf diseases is time-consuming and inconvenient. Fortunately, leaf appearance is used to detect diseases in potato plants. Productivity will considerably rise if the infections are detected early. Different types of image processing methods and machine learning methods are used for early recognition of those diseases from leaf images so that the product losses are decreased significantly. For the incredible and marvelous performance of CNN, it is the most popular deep learning method that is used immensely for the recognition of leaf diseases from images. Several pretrained deep learning models, such as VGG16, ResNet50, InceptionV3, MobileNetV2, Xception, and a deep learning model developed using CNN, are employed for potato leaf disease classification and recognition on the same dataset. The transfer learning technique is applied to the pretrained model and the data augmentation technique is applied to the Proposed CNN model for potato disease classification from leaf samples. Compared to pretrained models, the proposed CNN model offers the lowest loss and highest accuracy for potato leaf disease detection while using fewer parameters and layers. It achieves the best performance with a test accuracy of 99.33% compared to other Pretrained models used in the diagnosis of potato leaf disease.

Phenotypic plasticity is widely acknowledged as one of the most common solutions for coping with novel environmental conditions following climate change. However, it is less known wheth-er current amounts of trait plasticity, which is sufficient for matching with contemporary climate, will be adequate when global temperatures exceed historical levels. We addressed this issue by ex-ploring the responses of functional and structural leaf traits in Iris pumila clonal individuals to ex-perimentally increased temperature (~1.5°C), using an open top chamber (OTC) design. We de-termined phenotypic values of specific leaf area, leaf dry matter content, specific leaf water con-tent and leaf thickness in leaves sampled from the same clone inside and outside of the OTC de-ployed on it, over seasons and years within two natural populations. We analyzed the data by a repeated multivariate analysis of variance, which is primarily focused on profiles (reaction norms, RNs) of a variable gathered from the same individual at several different time points. We found that the mean RNs of all analyzed traits were parallel regardless of experienced temperatures, but differed in the level and the shape. The populations RNs were similar as well. Since the amount of plasticity in analyzed leaf trait was adequate for coping with elevated temperatures inside the OTCs, we predict that it will be also sufficient for responding to increased temperatures if they exceed the 1.5°C target.

This article introduces ten similarity measures that utilize cosine and cotangent functions to compare (m,n)-rung orthopair fuzzy sets, this a super class of q-rung orthopair fuzzy sets. Further, we applied our established weighted similarity measures to medical diagnosis, pattern recognition,and building material problems and also presented the comparison between established measures with the existing cosine and cotangent measures of q-rung orthopair, pythagorean and intuitionistic fuzzy sets. Lastly, we considered a numerical example that demonstrates the effective and scientific application of these similarity measures in plant leaf disease classification. Furthermore, we present graphical interpretations to demonstrate the effectiveness of our established measures.

In recent years, soil addition with organic amendments, such as biochar and compost, has gained attention as an effective agronomic practice to sustain soil fertility, enhance plant growth and crop yield. Well known are the positive effects of compost on yield of a wide crop varieties, while both positive and negative responses are reported for biochar Therefore, the aim of the study was to verify the effect of biochar mixed with three types of compost on quanti-qualitative response of Swiss chard (Beta vulgaris L. cycla), a leafy green vegetable rich in dietary antioxidants, largely consumed worldwide. A factorial experiment in pots with two factors, including biochar (without biochar and with biochar from vine pruning residues) and compost (without compost, with compost from olive pomace, with vermicompost from cattle manure and with compost from cattle anaerobic digestate), was setup. Two growth cycles were considered and a set of quantitative (height of plants, number, area and fresh weight of leaves) and qualitative parameters (carotenoid, chlorophyll, total N and NO3-content of leaves) were analyzed. Biochar decreased plant growth and NO3- leaf content; on the contrary, it increased total N leaf content, while compost improved all the considered parameters. The interactive effect of biochar and compost was evident only on total N and NO3- leaf content. In our experimental conditions, the compost showed to be the best option to improve Swiss chard growth and increase the phytopigments content, while the biochar-compost mixtures didn’t produce the expected effect.

The extracts from the aerial parts of Helianthus salicifolius A. Dietr and Helianthus tuberosus L. collected in June were obtained using carbon dioxide supercritical fluid extraction with water as co-solvent. The antimicrobial activity in vitro of these extracts were determined against the reference species of Gram-positive and Gram-negative bacteria as well as fungi, representing by the yeast species of Candida spp. The following parameters were estimated: minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) or minimum fungicidal concentration (MFC). Both extracts were found to possess antimicrobial activity with MIC = 0.62-5 mg mL-1 for bacteria and MIC = 5-10 mg mL-1 for yeasts, showing bactericidal (MBC/MIC = 2-4) or fungicidal effect (MFC/MIC = 1-2 ). The highest activity was observed against S. aureus ATCC 29213 (MIC = 0.62 mg mL-1 for H. salicifolius extract; MIC = 2.5 mg mL-1 for H. tuberosus extract). Bactericidal effect of both extracts against S. aureus ATCC 29213 was confirmed by time-kill assay. Higher antioxidant activity was found for H. tuberosus extract (EC50 = 0.332 mg mL-1) as compared to that of H. salicifolius (EC50 = 0.609 mg mL-1). The total polyphenol content (TPC) expressed as gallic acid equivalents (GAE) was 13.75 ± 0.50 mg GAE (g of H. salicifolius extract)-1 and 33.06 ± 0.80 mg GAE (g of H. tuberosus extract)-1. There was a correlation between the antioxidant potential of both extracts and TPC but not between antistaphylococcal activity and TPC. The obtained data suggest potential application of these extracts as the natural preparations with the biocidal activity, including those with antistaphylococcal activity. Besides, both extracts may be regarded as potential natural conservants in cosmetics as well as natural preservatives in food.

We analyzed the plant-litter-soil continuum to investigate the carbon and nitrogen distribution and ecological stoichiometry of an evergreen broad-leaved forest at Dagangshan Mountain, Jiangxi. The results showed that the average C and N contents and C:N ratios in the leaves and fine roots among 6 different tree species were 401.87g/kg, 21.41g/kg, 19.27 and 348.64g/kg, 15.73g/kg, 23.97, respectively; the average C and N contents and C:N ratios were 323.06 g/kg, 12.76 g/kg, 25.58 respectively in leaf litter, and 16.40 g/kg, 1.09 g/kg, 16.27 respectively for soil. In contrast with the C content, the total N content of the fine roots and litter had a high coefficient of variation and a high spatial heterogeneity. We ranked the six different representative tree species according to total C and N content in leaves and fine roots. The results for each species were generally consistent with each other, showing a positive correlation relationship between total C and N content in the leaves and roots. Among them, S. discolor (Champ. ex Benth.) Muell. plants displayed high carbon and nitrogen storage capacities, and on the other hand, C. fargesii Franch., C. myrsinifolia (Blume) Oersted, A. fortunei (Hemsl.) Makino, and V. fordii (Hemsl.) Airy Shaw showed a high nitrogen transfer rate. Total soil N and C decreased with depth. Soil organic carbon (SOC), soil resistant organic carbon (ROC), total N, alkali nitrogen, NH4+-N and NO3--N contents were all also negative correlated with soil depth, but the contents of the NH4+-N and NO3--N did not change significantly; The spatial distribution of soil NO3--N was significantly heterogeneous. At 0-10 cm soil depth, SOC was positively correlated with alkaline nitrogen, and at 10-20 cm soil depth, SOC was significantly positively correlated with total N. In general, when soil carbon was abundant, nitrogen supply capacity was also high.

The West-African variety of Sorghum bicolor leaf sheath (SBLS) Jobelyn® is a natural remedy, which has gained international recognition for its anti-anemic effect and energy boosting qualities in debilitating diseases. The widespread use of traditional medicine in the region usually confirms its safety, but not its efficacy or deep assessment of their pharmacological properties. The other major issue for herbal-based treatments is the lack of definite and complete information about the composition of the extracts. Despite limitations, efforts have been made in isolation and characterisation of active compounds in this specie of sorghum showing various subclasses of flavonoids including apigeninidin, a stable 3-deoxyanthocyanidin and potential fungal growth inhibitor, which accounts for 84% of the total extract. Non-clinical in vitro and in vivo studies support previous indications that this variety of Sorghum bicolor possesses several biologically active compounds with potent antioxidant, anti-inflammatory, anti-aging and neuro-protective properties. Clinical studies show that SBLS has the ability to boost hemoglobin concentrations in anemic conditions and most remarkably to increase CD4 count in HIV-positive patients. The multiple effects and high safety profiles of this extract may encourage its development as a therapeutic agent for the treatment of anemia, chronic inflammatory conditions or in the symptomatic management of HIV infections. This review describes the potential therapeutic aspects of SBLS extract and its potential benefits.

Despite the development of technologies, modern methods of disposal of end-of-life tires most often represent either the incineration in cement kilns or the destruction of tires in special landfills, showing a lack of sustainable recycling of this valuable material. The fundamental role of recycling is evident, and the development of high-efficiency processes represents a priority for the European market. Therefore, investigation of end-of-life rubber processing methods is of high importance for manufacturers and recyclers of rubber materials. In this paper, methods of processing of end-of-life tires are reviewed in order to obtain rubber crumb, which can later be used in the production of new industrial rubber goods and composite The processes of separation end-of-life tire into fractions by type of materials using mechanical processing methods along with mechanochemical and mechanical processes of processing the materials of used tires in order to obtain crumb rubber of various fractions and chemical reactivity are considered.

Two experiments were conducted to develop a Nano green manganese and assess its effect on grapevines. The first experiment was microbiological, where several incorporation strategies were utilized to enrich the yeast with manganese, as follows: (1) adding manganese to the liquid medium (growth phase), (2) adding after 24 h of incubation (non-growth phase). As the results, growth phase reduced the possibility of medium contamination. Manganese concentration in the yeast cells was increased as that of manganese sulphate in the medium. Manganese incorporation in yeast cells was 99.93% higher than that of the medium at 0.0195 g/l of manganese. Although the concentration of manganese in the medium raised the OD of yeast cell biomass, manganese sulphate had no passive influence on it. The second experiment was horticultural, done on Flame Seedless grapevines, since both active fresh and frozen yeast enriched with manganese resulted from the first experiment were sprayed twice a year at 10 or 20 cm3/l comparing with manganese sulphate, and manganese chelate. The results demonstrated that yeast extracts in both forms increased the yield and improved fruit properties. The most effective treatment on vegetative growth, yield and fruit properties was the frozen yeast enriched with manganese at 20 cm3/l.

Predictive studies are essential to establish fundamental data for monitoring and controlling Xylella fastidiosa infections in our country. Limited knowledge exists about how Xylella fastidiosa interacts with the plant host's immune system, leaving numerous unanswered questions regarding Xylella fastidiosa biology and its interactions with national plant hosts. Key inquiries include understanding of how the plant immune system interfaces with Xylella fastidiosa in the xylem and identifying the specific or shared mechanisms underlying the susceptibility of different hosts. Factors such as the presence of insect vectors, abundance of host plants, and climate suitability play pivotal roles in Xylella fastidiosa dispersal. We recommend that countries identified with relatively high risk, like Portugal, undertake thorough individual risk analyses. The implementation of preventive measures and, if necessary, the enhancement of surveillance systems for early detection of Xylella fastidiosa in plants and insect vectors are crucial steps. Additionally, raising awareness is of equal importance to mitigate socioeconomic and ecological impacts on their ecosystems.

Litsea martabanica root's antioxidant and AChE activity showed promise as a pesticide detoxification agent in our previous study. In addition to roots, its leaves can help mitigate pesticide exposure, although there is limited scientific evidence supporting their efficacy. However, the use of roots in many countries, such as Thailand, could contribute to environmental degradation, as highland communities traditionally cut down whole trees to obtain them. This study aims to evaluate the antioxidant activity and anti-pesticide potential of water extracts from L. martabanica leaves instead of its roots through in vitro and in vivo investigations. The findings showed that L. martabanica water extracts and fractions demonstrated varied antioxidant activity. The water extract, obtained using traditional extraction methods, was chosen for in vivo experiments. Rats received the extract followed by chlorpyrifos exposure for 16 days. Results indicated reduced acetylcholinesterase activity in chlorpyrifos-exposed rats, while treatment with leaf extract led to increased activity, suggesting its potential as a detoxifying agent. Histopathological examination revealed no liver cell necrosis and showed liver cell regeneration, indicating potential protection against free radical-induced liver damage without affecting rat liver weight or biochemical profiles. Utilizing L. martabanica leaves for healthcare purposes holds promise without negative environmental impact.

Our study explores the genetic mechanisms underlying the spotted leaf phenotype in rice, focusing on the rpt5a mutant characterized by persistent reddish-brown leaf spots from seedling stage to maturity, leading to extensive leaf necrosis. Through map-based cloning, we localized the responsible locus to a 330Kb region on chromosome 2 and identified LOC_Os02g56000 (named OsRPT5A) as the causative gene. A point mutation in OsRPT5A, substituting valine for glutamic acid, was identified as the critical factor for the phenotype. Functional complementation and generation of knockout lines in the IR64 background confirmed the central role of OsRPT5A in controlling this trait. Our study also revealed that OsRPT5A is constitutively expressed across various tissues, with its subcellular localization unaffected by mutations. Notably, we observed an abnormal accumulation of reactive oxygen species (ROS) in rpt5a mutants, suggesting a disruption in the ROS system. Complementation studies indicated OsRPT5A's involvement in ROS homeostasis and catalase activity regulation. Moreover, the rpt5a mutant exhibited enhanced resistance to Xanthomonas oryzae pv. oryzae (Xoo), highlighting OsRPT5A's role in rice's pathogen resistance mechanisms. These findings elucidate the genetic basis of the spotted leaf phenotype and emphasize the intricate interplay between plant defense responses and developmental pathways.

Background: Sugar laden foods and carbohydrate rich diets with high glycaemic index intake are associated with weight gain, increased incidence of diabetes and is linked with increased cardiovascular risk. A blend of mulberry leaf extract and apple peel extract (Glubloc™) may reduce postprandial blood glucose surge and insulin response following dietary carbohydrate intake by limiting its digestion and uptake from the gut. Methods: In this randomised, placebo-controlled, crossover study, thirty healthy male and female subjects were supplemented with either placebo or Glubloc™, 10 min before a carbohydrate and sugar rich meal intake. Changes in postprandial blood glucose (upto120 minutes) and insulin levels (at 60 minutes) were measured as the primary endpoints. Changes in blood glucose incremental area under the concentration curve (iAUC), maximum concentration (Cmax) and peak time (Tmax) were compared. Results: Thirty adults (mean age 31±7.2 years, BMI 24±3.8 kg/m2) completed the study and the Glubloc™ blend relative to placebo significantly reduced glucose iAUC at 0.5 h (− 38%, p < 0.0003), 1.0 h (− 30%, p = 0.0007), 1.5 h (− 29%, p = 0.0008), and 2.0 h (− 26%, p = 0.002). A statistically significant reduction in 1 h insulin levels (− 35%, p = 0.029) was observed. Conclusion: A single dose supplementation of Glubloc™ significantly reduced the postprandial blood glucose spike and serum insulin levels. The observation of a significant glucose reduction paralleled with a significant lower insulin response supports a reduced gastrointestinal glucose absorption. None of the subjects experienced any major gastrointestinal side effects. This study builds a body of evidence that the combination of white mulberry leaf and green apple peel extracts (Glubloc™) can be a useful supplement to manage postprandial glucose levels, further studies are necessary to evaluate its potential in type 2 diabetes and the regulation of dysglycaemia.

Invasive alien plant species (IAPS) pose one of the most significant threats to native biodiversity. Swietenia macrophylla, or big leaf mahogany, is among the most threatening invasive plants in the Philippines. This article aimed to formally document the presence of S. macrophylla along the edges of Mt. Banahaw de Nagcarlan, a protected area on Luzon Island, Philippines. The study also sought to identify the management strategies being implemented by various government institutions for addressing big leaf mahogany and other invasive plants. A total of 1591 individuals of S. macrophylla were documented in mixed land-use areas and roadsides. These were found to have been introduced by the Department of Environment and Natural Resources in 1991 as a reforestation species. Fortunately, no individuals were observed beyond the buffer zone towards the protected area. The identification of management strategies for big leaf mahogany and other IAPS revealed that there is no established approach specifically addressing the presence of S. macrophylla at the site. However, some institutions advocate for the conservation of native plants through tree planting activities and educational campaigns. Furthermore, no collaborative efforts were observed among stakeholders and institutions. The results of this study highlight the urgent need for managing the S. macrophylla population. Planning and enforcement of strategies require collaborative efforts among stakeholders to prevent its entry into the protected area and ensure the preservation of native biodiversity.

It is well-established that plants are sessile and photoautotrophic organisms that rely on light throughout their entire life cycle. Light quality (spectral composition) is especially important as it provides energy for photosynthesis and influences signaling pathways that regulate plant devel-opment in the complex process of photomorphogenesis. During past years, significant progress has been made in the physiological and biochemical effects of light quality on crops. However, understanding how light quality modulates plant growth and development remains a complex challenge. In this review, we provide an overview of the role of light quality in regulating early development of plants, encompassing processes such as seed germination, seedling de-etiolation, and seedling establishment. These insights can be harnessed to improve production planning and crop quality by producing high-quality seedlings in plant factories and improving the theoretical framework for modern agriculture.

Under Egyptian soil conditions, when phosphorus fertilizers were applied to the soil, it gets fixed and converts to unavailable form, leading to low solubility for the plant. This study were fulfilled on sweet potato (cv. Beauregard) under undesirable soil properties (CaCO3 10.8 vs 11.3%) using Bacillus megaterium DSM 2894 strain under different five mono calcium phosphate (CSP) levels [(69(CSP20); 138(CSP40); 207 (CSP60); 276 (CSP80) and 345 ((CSP100) kg ha-1 of calcium superphosphate (CSP)] to arise the potential efficiency of some nutrients uptake and decease the applied total amount of CSP in 2019 and 2020 seasons. The results mentioned that highest values were obtained by inoculated plants with DSM2894 strain under 20, 60 and 100% of CSP for all studied nutrients content in both seasons, except Mn content in the 2019. Also, inoculated plants with DSM2894 under previous treatments for all tuberous root nutrients content, except Fe and Zn contents in both seasons, in addition protein and anti-radical power and total yield. Statistically, leaf nutrients uptake and tuberous root content were highly significant affected by DSM and CSP combination. Appling of phosphorus fertilizer with DSM2894 mixture was gave the best values as compared with phosphorus fertilizer or DSM2894, individually.

The Sugarcane yellow leaf virus (SCYLV) is associated with sugarcane yellow leaf disease (SCYLD) and is considered to be the most economically deleterious emerging pathogen that represents a potential threat and danger to sugarcane cultivation in China. Over the last two decades, high genetic diversity in the SCYLV genotypes was observed worldwide, with a greater chance of YLD incidence for sugarcane injury. SCYLV infection has significantly damaged its economic traits and is responsible for substantial losses in biomass production in sugarcane cultivars. This study aims to identify and comprehensively analyze sugarcane microRNAs (miRNAs) as therapeutic targets against SCYLV using plant miRNA prediction tools. Mature sugarcane miRNAs are retrieved and are used for hybridization of the SCYLV. A total of seven common sugarcane miRNAs were selected based on consensus genomic positions. The biologically significant, top ranked ssp-miR528 was consensually predicted to have a potentially unique hybridization site at nucleotide position 4162 for targeting the ORF5 of the SCYLV genome; this was predicted by all the algorithms used in this study. Then, the miRNA–mRNA regulatory network was generated using the Circos algorithm, which was used to predict novel targets. There are no acceptable commercial SCYLV-resistant sugarcane varieties available at present. Therefore, the predicted biological data offer valuable evidence for the generation of SCYLV-resistant sugarcane plants.

Environmental conditions, such as temperature, carbon dioxide, and nutrient availability, are altered by urban conditions at regional scales with potential for impact on tree leaf structure. Our goal was to compare leaf morphological characteristics driven by physiological acclimation in red maple (Acer rubrum L.) trees in deciduous forests embedded in a small (Newark, DE) and a large (Philadelphia, PA) city. The study was conducted in six urban forests on eighteen mature red maple trees in a long-term urban forest network. We hypothesized that red maples in Philadelphia forests compared to Newark forests will have a thicker upper epidermal layer, spongy palisade and mesophyll layer, longer and wider stomates, and lower stomate density. Additionally, we hypothesized that red maples in Philadelphia forests compared to Newark forests will have lower leaf water content and specific leaf area, and greater leaf thickness, fresh leaf weight, dry leaf weight, and leaf dry matter content. Our results for stomate length and stomate width supported our predictions; red maple leaves had longer and wider stomates in Philadelphia forests than in Newark forests. The increased stomate size in red maple trees suggests potential altered gas exchange behavior and mutual abiotic stress mitigation responses in red maple to greater urbanization impacts in Philadelphia forests. This supports previous findings of possible physiological and biochemical acclimation of red maple trees to urban conditions. Furthermore, the findings from this study suggest red maple trees may be a good biomonitor of regional scale impacts in urban environments.

This study presents a novel approach for quantifying the dynamics of monthly hydraulic geometry relationships in the Jingjiang reach of the Yangtze River by integrating leaf area index (LAI) data as an indicator of riparian vegetation. A comprehensive system of ordinary differential equations (ODEs) couples traditional power-law hydraulic geometry equations with LAI, capturing the influence of erosion control on channel morphology. The periodic delayed response theory and automatic differentiation techniques are employed to enhance the modeling framework's capabilities. Calibration and verification demonstrate the models' effectiveness in capturing overall trends in discharge, width, and depth dynamics, outperforming traditional constant-parameter approaches. However, model predictive abilities are limited under extreme climate conditions due to training on normal climate data. Key assumptions, including the periodic delayed response theory's neglect of peak discharges, simplified representation of artificial cut-offs, and reliance on remotely sensed data with limited local validation, introduce uncertainties. The proposed modeling framework shows potential for broader application to other river systems with appropriate adjustments. Future research could incorporate additional environmental factors, integrate models across scales, couple with advanced simulation techniques, and expand stability assessments beyond the riverbed index. By addressing related challenges, this integrated approach lays a foundation for enhancing understanding of river morphodynamics and channel stability.

Precision farming, a labor-saving and highly productive management, is gaining popularity as the number of farmers declines in contrast to the increasing global food demand. However, it requires more efficient crop phenology observation and growth monitoring. One measure is the Leaf Area Index (LAI), which is essential for estimating biomass and yield, but its validation requires destructive field measurements. Remote sensing offers a non-destructive and effective method for ground- and UAV-based field observations. Thus, in this study, a method for indirect estimation of LAI was investigated using ground and UAV observation data. A weekly plant survey was done to measure the plant height, above-ground biomass, and light intensity. Furthermore, images from ground-based and UAV-based cameras were acquired to generate NDVI and the canopy height (CH), respectively. Using the canopy photosynthetic model, derived from Lambert-Beer’s law, the daily biomass was estimated by applying the weekly estimated LAI using CH, and the observed light intensity data as input. The results demonstrated the possibility of quantitatively estimating the daily growth biomass of rice plants, including its spatial variation. The near-real-time estimation method of rice biomass by integrating observation data at fields with numerical models can be applied to the management of major crops.

Lots of efforts are made to optimize spectrum quality used for indoor farming to maximize artificial light utilization and reduce water loss. For such an improvement, green (G) light supplementation to a red-blue (RB) background was successfully employed in our previous studies to restrict both non-photochemical thermal dissipation (NPQ) and stomatal conductance (gs). At the same time, however, the downregulation of NPQ and gs influences the leaf temperature (Tleaf) in opposite ways. Thus, to elucidate which factor plays a more prominent role in Tleaf regulation and whether such response is temporal or permanent we investigated the correlation between NPQ or gs and the subsequent Tleaf. To this end, we analysed tomato plants (Solanum lycopersicum L. cv. Malinowy Ozarowski) grown solely under monochromatic LED lamps (435, 520, or 662 nm; 80 µmol m–2 s–1) or under mixed RGB spectrum (1:1:1; 180 µmol m–2 s–1), and simultaneously measured the gs and Tleaf with an infrared gas analyser and thermocouple or employed infrared thermal camera (FLIR) during thermal imaging analyses. Results documented that growth light quality significantly modified the Tleaf, and such response is not temporal. Furthermore, we found that plants' actual adaxial leaf surface temperature is more closely related to NPQ amplitude, while the temperature of the abaxial surface corresponds to gs.

Cotton leaf curl Kokhran virus (CLCuKoV) (genus, Begomovirus; family, Geminiviridae) is highly infectious, widespread and the most dangerous pathogen of cotton (Gossypium hirsutum L.) that is responsible to a serious disorder, cotton leaf curl disease (CLCuD). Begomoviruses are spread very efficiently by the whitefly Bemisia tabaci cryptic species, causing economic losses to cotton crop, all over the world. The ‘Lucknow’ strain of CLCuKoV has emerged as a divergent isolate that could cause CLCuD. The monopartite ssDNA genome of CLCuKoV-Lu (2.7 Kb) contains six open reading frames (ORFs) that was shown to encode four major proteins. RNA interference (RNAi)-based antiviral innate immunity is a sequence-specific biological phenomenon and a powerful tool to control plant viruses. The present study aims to determine cotton locus-derived microRNAs (ghr-miRNAs) that are identified for targeting the CLCuKoV-Lu ss-DNA-encoded mRNAs using a predictive approach that involves four computational algorithms, miRanda, RNA22, psRNATarget and RNAhybrid. Mature ghr-miRNA sequences (n=80) from allotetraploid upland cotton (2n = 4x = 52) were selected from the miRBase and were tested for alignment with the CLCuKoV-Lu genome. Among the 80 cotton locus-derived ghr-miRNAs evaluated, only one consensus cotton locus-derived ghr-miRNA (ghr-miR2950) was concluded to have effective ghr-miRNA target site at common nucleotide position 82 in the CLCuKoV-Lu genome respectively, using a stringent criterion, identified by all the algorithms used. The miRNA targeting is reliant on base pairing of miRNA-mRNA target pairings. Conservation of the hybridization binding site of the predicted ghr-miR2950 was validated using multiple sequence alignment within all the strains of CLCuKoV. We constructed a regulatory interaction network of miRNA–mRNA to identify novel targets. The efficacy of the predicted miRNAs against CLCuKoV-Lu was evaluated by RNAi-mediated targeted mRNA cleavage. The current investigated miRNA targets provide evidence for the development of CLCuD-resistant cotton plants.

The globose scale (GS) (Sphaerolecanium prunastri Boyer de Fonscolombe) is a sucking insect that feeds on saps of wild apricot tree (Prunus armeniaca L.) in the Xinjiang Uygur Autonomous Region of northwestern China. It feeds on branches of wild apricot leading to poor growth, leaf yellowing and leaf drop, and sometimes mortality. Since the initial infestation in 2018, all the main valleys of wild apricot trees have been affected, but there is little research on the host’s physiological response to GS infestation. We measured the differences in growth between infested and non-infested wild apricots. The results showed that the diameter of shoot branches, the fresh weight, dry weight, length, width, area, and chlorophyll content of leaves, and the longitudinal diameter of fruit, were all significantly less for infested wild apricot trees than for un-infested wild apricot. The branch length of shoots, cross diameter, and weight of fruit also decreased, although the differences were not significant. Overall, GS infestation significantly reduced the growth of wild apricot trees, and may accelerate the damage by GS to wild apricot over time.

3D measurement is a high-throughput method that can record a large amount of information. In this study, we have developed new methods that could be used for morphological analysis of plants from the information contained in 3D data. Specifically, we investigated characteristics that can be measured by scale (dimension) and/or visual assessment by humans. The characteristics that can be measured on a scale-related dimension were tested based on the bounding box, convex hull, column solid, and voxel. Furthermore, for characteristics that can be evaluated by visual assessment, we propose a new method using normal vectors and local curvature (LC) data. For these examinations, we used our highly accurate all-around 3D plant modelling system. The correlation coefficients between manual measurements and the scale-related methods were all above 0.9. In particular, the differences in LC calculated from the normal vector data allowed us to visualize and quantify the concavity and convexity of leaves. Furthermore, we also found a difference in the time point at which leaf blistering began to develop among the cultivars. The precise 3D model made it possible to perform quantitative measurements of lettuce size and morphological characteristics. In addition, the newly proposed LC-based analysis method made it possible to quantify the characteristics that rely on visual assessment.

If genetic gains in wheat yield are to be achieved in today’s breeding, increasing genetic variability of cultivated genotypes is an essential requisite to meet. To this aim, alien gene transfer through chromosome engineering (CE) is a validated and sound strategy. Attempts to incorporate more than one alien segment into cultivated wheat have been rare, particularly for tetraploid durum wheat. Here we present the agronomic and quality performance of the first successful CE-mediated multiple introgression into the latter species. By assembling into 7AL, 3BS and 1AS arms of a single genotype homoeologous segments of Thinopyrum ponticum 7el1L, Aegilops longissima 3SlS, and Triticum aestivum 1DS arms, respectively, we have stacked several valuable alien genes, comprising Lr19+Sr25+Yp (leaf and stem rust resistance and a gene increasing semolina yellowness), Pm13 (powdery mildew resistance) and Gli-D1/Glu-D3 (genes affecting gluten properties), respectively. Advanced progenies of single, double and triple recombinants were field-tested across three years in a typical durum wheat growing area of Central Italy. The results showed that not only all recombinants had normal phenotype and fertility, but also that one of the triple recombinants had the highest yield through all seasons compared with all other recombinants and control cultivars. Moreover, the multiple introgressions enhanced quality traits, including gluten characteristics and semolina yellow index. Presence of effective disease resistance genes confers additional breeding value to the novel and functional CE products, which can greatly contribute to crop security and safety.

Diseases of cereals caused by pathogenic fungi can significantly reduce crop yields. Many cultures are exposed to them. The disease is difficult to control on a large scale, thus one of the relevant approaches is the crop field monitoring, which helps to identify the disease at an early stage and take measures to prevent its spread. One of the effective control methods is disease identification based on the analysis of digital images with the possibility of obtaining them in field conditions using mobile devices. In this work, we propose a method for the recognition of five fungal diseases of wheat shoots (leaf rust, stem rust, yellow rust, powdery mildew, and septoria), both separately and in combination, with the possibility of identifying the stage of plant development. A set of 2414 images of wheat fungi diseases (WFD2020) was generated, for which expert labeling was performed by the type of disease. WFD2020 data are available freely at http://wfd.sysbio.ru/. In the process of creating this set, a method was applied to reduce the degeneracy of the training data based on the image hashing algorithm. The disease recognition algorithm is based on the convolutional neural network with the EfficientNet architecture. The best accuracy (0.942) was shown by a network with a training strategy based on augmentation and transfer of image styles. The recognition method was implemented by the authors as a bot on the Telegram platform, which allows assessing plants by lesions in the field conditions.

Green infrastructure systems are often overdesigned. This may be a byproduct of static sizing (e.g., accounting for a design storm’s runoff volume but not exfiltration rates) or may be deliberate (e.g., buffering against performance loss through time). Regardless, overdesign may compromise plants’ access to water in systems where soil pits are embedded in infiltration beds. It could raise the storm size required for water to reach soil pits, reducing water availability between storms, which could ultimately induce plant physiological stress. This study investigated the hydrological dynamics and water relations of a tree trench system suspected to have been overbuilt and identified factors contributing to, compounding, and mitigating the risk of plant stress. Results provided strong evidence that the abovementioned processes played out. Water in the infiltration bed reached soil pits only once in three years, with that event occurring during a hydrant release. Moreover, minimal water was retained in the soil pit during the event due to the hydraulic properties of the soil media. Through a growing season, one of the two tree types frequently experienced water stress, while the other did so only rarely. These contrasting responses can likely be attributed to roots either being largely confined to the soil pits or reaching a deeper water source. Implications of these results for green infrastructure design are considered.

The amount and spatial distribution of foliage in a tree canopy have fundamental functions in ecosystems as they affect energy and mass fluxes through photosynthesis and transpiration. They are usually described by the Leaf Area Index (LAI) and the Leaf Area Density (LAD), which can be measured through a variety of methods, including voxel-based methods applied to LiDAR point clouds. A theoretical study recently compared the numerical errors arising from different voxel-based estimation methods for Plant Area Density (PAD) based on Beer’s law-based, contact frequency and Maximum-Likelihood Estimation, showing that the bias-corrected Maximum Likelihood Estimator was theoretically the most efficient. However, this earlier study i) ignored wood volumes; ii) neglected vegetation clumping inside the voxel; iii) ignored instrument characteristics in terms of effective footprint, iv) was limited to a single viewpoint. In practice, retrieving LAD from PAD is not straightforward, vegetation is not randomly distributed in volumes of interest, beams are divergent and forestry plots are usually sampled from more than one viewpoint, to mitigate the effect of occlusion. In the present short communication, we extend the previous efficient formulation to actual field conditions to i) account for the presence of both wood volumes and wood hits, ii) rigorously include correction terms for vegetation and instrument characteristics, iii) integrate multiview data. A numerical comparison with other methods commonly used to combine information from different viewpoints led to error reduction, especially in poorly-explored volumes, which are frequent in actual canopies. Beyond its concision, completeness and efficiency, this new formulation -which can be applied to multiview TLS, but also UAV LiDAR scanning - can help reducing errors in LAD estimation.

Anthracnose (ANT) and angular leaf spot (ALS) are significant diseases in common bean, leading to considerable yield losses under specific environmental conditions. The California Dark Red Kidney (CDRK) bean cultivar is known for its resistance to multiple races of both pathogens. Previous studies have identified the CoPv01CDRK/PhgPv01CDRK resistance loci on chromosome Pv01. Here, we evaluated the expression levels of ten candidate genes near the CoPv01CDRK/PhgPv01CDRK loci and plant defense genes using quantitative real-time PCR in CDRK cultivar inoculated with races 73 of Colletotrichum lindemuthianum and 63-39 of Pseudocercospora griseola. Gene expression analysis revealed that the Phvul.001G246300 gene exhibited the most elevated levels, showing remarkable 7.8-fold and 8.5-fold increases for ANT and ALS, respectively. The Phvul.001G246300 gene encodes an abscisic acid (ABA) receptor pyrabactin resistance - PYR1-like (PYL) protein, which plays a central role in crosstalk between ABA and jasmonic acid responses. Interestingly, our results also showed that the other defense genes were initially activated. These findings provide critical insights into the molecular mechanisms underlying plant defense against these diseases and could contribute to the development of more effective disease management strategies in the future.

Gene expression variations of plant leaf are investigated by irradiating seed and leaf with oxygen or air plasmas. Enhancement of leaf growth is induced by oxygen plasma irradiation on seeds, which is supported by increased gene expression for protein synthesis, oxidative-reduction reactions and decreased gene expression concerning DNA methylation and histone modification. Suppression of leaf growth is observed by the oxygen plasma, which would be owing to increased gene expression concerning heat shock protein and redox reaction, and decreased expression of photosynthesis and glycoprotein. Also, gene expression variation due to air plasma irradiation is almost same as that of oxygen plasma. Active oxygen species are major factors in both oxygen and air plasmas for the variation of gene expressions in plant.

To enhance pomegranate production on marginal gravelly lands, our study evaluated standardized planting techniques in an 8-year-old orchard. We employed trenching, wider pit excavation, pit digging, and auger digs with dimensions of 1 and 2 meters. Utilizing native soil from barren land, with or without spent wash, and mixing it with black soil up to 1 meter deep, we assessed growth parameters, leaf nutrients, and fruit yield. The trench and wider pit methods outperformed others, yielding greater above-ground biomass (>7.03 t tree-1), root biomass (2.5 t tree-1), and cross-sectional area (3.3 m² tree-1). Additionally, trench planting enhanced leaf phosphorus (0.28%) and potassium (1.8%) levels, fruit juice content (48.5%), total soluble solids (16.05°), and fruit yield (>9.3 t ha-1). The trench method also fostered longer roots at 90–150 cm radial distance and deeper roots at 40–60 cm depth. In summary, the trench and wider pit methods, combined with a soil mixture, are recommended for sustainable, high-quality fruit production in shallow gravelly terrains, thereby improving food security and the livelihoods of farmers in arid regions.

Xylella fastidiosa (Xf) is classified as a quarantine pest due to its consequences on economically significant crops. Its main form of transmission in Europe is through the insect Philaenus spumarius. Due to climate change, populations of insect vectors became more extensive, resulting in the dissemination of the bacteria through longer periods, but destruction of these insects raises issues, due to their role in nature. Upon infection, Xf causes the occlusion of xylem vessels by bacterial aggregates, and tylosis production by the plant as a response to infection. Although symptomatic manifestations of Xf are often linked to water stress, a variety of plant species have been found to carry the pathogen without symptoms, making it all too easy to evade detection when relying on visual inspections. Beyond water stress, other conditions (individual plant resistance/tolerance, bacterial concentrations, transpiration rates, and interactions between subspecies) may be implicated in symptom development. A thorough understanding of how this disease develops, especially its capacity to spread from the initial focus and establish a systemic infection, is imperative. This review focuses on the Xf infection process, the development of symptoms, its spread within Portugal, and the actions that have been taken to counter it.

This study aims to categorize the morphological changes during cabbage (B. oleracea ssp. capitata) development: seedling, rosette, folding, and heading and to elucidate the cellular mechanisms of leaf curvature, essential for the formation of the leafy head. We followed the growth of two cabbage morphotypes with distinct head shapes (round and pointed); we phenotyped the size and volume of the whole-plant as well as the size, shape, and curvature of the leaves during growth. By integrating these phenotypic data, we determined the four vegetative stages for both cabbages. Cytological phenotypes of microtome sections from five distinct leaf positions of the rosette, folding, and heading leaves at two timepoints during leaf growth were quantified and revealed variations in cellular parameters among leaf types, between leaf positions, and between the adaxial and abaxial sides. We identified two synergistic cellular mechanisms contributing to the curvature of heading leaves: differential growth across the leaf blade, with increased growth at the leaf's centre relative to the margins; and increased expansion of the spongy parenchyma layer compared to the palisade parenchyma layer, resulting in the direction of the curvature, which is inwards. These two processes together contribute to the typical leafy heads of cabbages.

This study aims to clarify the influence of photographic environments under different light sources on image-based SPAD value prediction. Radish leaf patches of 1.5 cm diameter were photographed under halogen or LED light. The input variables for the SPAD value prediction using random forests were RGB values, HSL values, and HSV values. Additionally, the light color temperature (LCT) and illuminance (ILL) were used as the input variables. Model performance was assessed using Pearson’s correlation coefficient (COR), Nash-Sutcliffe efficiency (NSE), and root mean squared error (RMSE). SPAD value prediction resulted in high accuracy in a stable light environment; CORRGB+ILL+LCT and CORHSL+ILL+LCT were 0.929 and 0.922, respectively. Image-based SPAD value prediction was effective under halogen light with a similar color temperature at dusk; CORRGB+ILL and CORHSL+ILL were 0.895 and 0.876, respectively. The HSL value under LED could be used to predict the SPAD value with high accuracy; COR, NSE, and RMSE were 0.972, 0.944, and 2.07, respectively. The partial dependence plots of the H value indicate a change from blue to green with increasing SPAD values. Further studies are required to examine this method under outdoor conditions in spatiotemporally dynamic light environments.

Blackcurrant leaf chlorosis associated virus (BCLCaV) was detected recently by next-generation sequencing (NGS) and proposed as a new and distinct species in the genus Idaeovirus. Genomic components of BCLCaV that were detected and confirmed include: 1) RNA-1 that is monocistronic and encodes the replicase complex; 2) a bicistronic RNA-2 that encodes a movement protein (MP) and the coat protein (CP) of the virus, with open reading frames (ORF) that overlap by a single adenine (A) nucleotide (nt) representing the third position of an opal stop codon of the MP ORF2a and the first position of the start codon of the CP ORF2b; 3) a subgenomic form of RNA-2 (RNA-3) that contains ORF2b; and 4) a concatenated form of RNA-2 that consists of a complementary and inverted RNA-3 conjoined to the full-length RNA-2. Analysis of NGS-derived paired-end reads revealed the existence of bridge reads encompassing the 3’-terminus and 5’-terminus of RNA-2 or RNA-3 of BCLCaV. The full RNA-2 or RNA-3 could be amplified using outward facing or abutting primers; also RNA-2/RNA-3 could be detected even after three consecutive RNase R enzyme treatments with denaturation at 95 ^oC preceding each digestion. Evidence was obtained indicating that there are circular forms of BCLCaV RNA-2 and RNA-3.

Fire-tolerant eucalypt forests of south eastern Australia are assumed to fully recover from even the most intense fires but surprisingly very few studies have quantitatively assessed that recovery. Accurate assessment of horizontal and vertical attributes of tree crowns after fire is essential to understand the fire’s legacy effects on tree growth and on forest structure. In this study, we quantitatively assessed individual tree crowns 8.5 years after a 2009 wildfire that burnt extensive areas of eucalypt forest in temperate Australia. We used airborne lidar data validated with field measurements to estimate multiple metrics that quantified the cover, density, and vertical distribution of individual-tree crowns in 51 plots of 0.05 ha in fire-tolerant eucalypt forest across four wildfire severity types (unburnt, low, moderate, high). Significant differences in the field-assessed mean height of fire scarring as a proportion of tree height, and in the proportions of trees with epicormic (stem) resprouts were consistent with the gradation in fire severity. Linear mixed-effects models indicated persistent effects of both moderate- and high-severity wildfire on tree crown architecture. Trees at high-severity sites had significantly less crown projection area and live crown width as a proportion of total crown width than those at unburnt and low-severity sites. Significant differences in lidar-based metrics (crown cover, evenness, leaf area density profiles) indicated that tree crowns at moderate- and high-severity sites were comparatively narrow and more evenly distributed down the tree stem. These conical-shaped crowns contrasted sharply with the rounded crowns of trees at unburnt and low-severity sites, and likely influenced both tree productivity and the accuracy of biomass allometric equations for nearly a decade after the fire. Our data provide a clear example of the utility of airborne lidar data for quantifying the impacts of disturbances at the scale of individual trees. Quantified effects of contrasting fire severities on the structure of resprouter tree crowns provide a strong basis for interpreting post-fire patterns in forest canopies and vegetation profiles in lidar and other remotely-sensed data at larger scales.

With the growth of air traffic demand in busy airspace, there is an urgent need for airspace sectorization to increase air traffic throughput and ease the pressure on controllers. The purpose of this paper is to develop a method framework that can perform airspace sectorization automatically, reasonably, which can be used as an advisory tool for controllers as an automatic system, especially for eliminating irregular sector shapes generated by simulated annealing algorithm (SAA) based on region growth method. Two graph cutting method, dynamic Monte Carlo method by changing location of flexible vertices (MC-CLFV) and Monte Carlo method by radius changing (MC-RC) were developed to eliminating irregular sector shapes generated by SAA in post-processing. The experimental results show that the proposed method framework of AS can automatically and reasonably generate sector design schemes that meet the design criteria. Our methodology framework and software can provide assistant design and analysis tools for airspace planners to design airspace, improve the reliability and efficiency of airspace design, and reduce the burden of airspace planners. In addition, this lays the foundation for reconstructing airspace with more intelligent method.

Throughout the world, salinity is a major environmental issue that limits agricultural productivity, particularly in arid and semi-arid regions. In addition, climate change is the most important reason for the salinization of agricultural soils in the world, so it is now essential to find solutions to increase salinity tolerance in plants. This study investigated the potential of arbuscular mycorrhizal fungi (AMF) inoculation to enhance the growth and yield performances of flax under different salinity levels by conducting a pot experiment. The experiment was laid out in a two-factor completely randomized design including AMF inoculation (AMF+: with and AMF-: without inoculation) and irrigation water salinity (0, 50, 100, and 150 mM NaCl). According to the results, it is evident that salt stress caused negative physiological effects, including limited growth, reduced photosynthesis, and decreased nitrogen (N) and phosphorus (P) content in shoots and roots of flax plants. Moreover, mycorrhizal association improved the salt tolerance of the plants by increasing chlorophyll content, enhancing N and P shoot and root contents, and consequently yield parameters, such as seed, and stem fiber yield, particularly at moderate salt concentrations (50 and 100 mM NaCl). As a result of using AMF, flax plants grown under salt stress exhibited tolerance, suggesting that AMF could be applied in saline environments to maintain ecological stability.

Red plum apricot is the best apricot over the world. Since having been introduced into Guyuan county in 1987 from Shaanxi province, red plum apricot grows well and then has been selected as good varieties to popularize in semirid loess hilly regions because the color of red plum apricot is beautiful, aroma fragrant , and taste is the mix of sour and sweet and nutrition is rich. Since 1995, the yield, benefits and planting area of red plum apricot increase doubly, and the distribution range of red plum apricot increased from Guyuan to the whole Ningxia, and then to Gansu province and so on in the water-limited regions, China. However, there are still some problems in the sustainable produce of red plum apricot. In order to promote the development of red plum apricot and meet people's increasing demand, we should do intensive study of the relationship between red plum apricot and environment and the comparison of possible methods to reduce the bad influence of drought, low temperature and frost on quality and production of red plum apricot, and determine the soil water resources use limit by red plum apricot and the suitable leaf amount of red plum apricot when the planting density equal soil water carrying capacity for red plum apricot and select the best method to reduce or evade the bad influence of soil drought, low temperature, frost and soil drought on red plum apricot to ensure the sustainable produce of red plum apricot in Sustainable Produce of red plum apricot in water-limited regions.

Platelets have long been associated with sustaining the balance between hemostasis and thrombosis. Platelets, however, are also involved in a wide range of biological activities, including inflammation, immunology, wound healing, cancer biology, and angiogenesis. Platelets' diverse roles are mediated by the expression of various adhesive and immune receptors and the secretion of a diverse array of bioactive proteins, ions stored in granules, and several lipid mediators. Platelets also release pro-inflammatory and anti-inflammatory, and angiogenic factors and shed microparticles into the bloodstream. The challenge for therapeutic intervention in non-hemostatic disease is identifying the factors that primarily inhibit specific targets implicated in platelets' complicated contribution to inflammation or tumor growth while leaving their hemostatic function intact. In addition, blood platelets are involved in infection and innate and adaptive immunity by mediating complicated vascular homeostasis via specialized receptors and granule release, RNA transfer, and mitochondrial secretion. Anti-platelet drugs/bioactive compounds are developed based on their platelet anti-aggregatory properties; however, very little information is available on their effects on non-hemostatic function. Therefore, a better understanding of the impact of the anti-platelet bioactive on the platelets' diverse roles and mechanisms may help develop new strategies and prevent CVD and other diseases. In this review, a comprehensive overview of platelet multifunctional roles in CVD and other diseases and dietary factors' modulatory effects are described.

Fossils constitute the principal repository of data that allow for independent tests of hypotheses of biological evolution derived from observations of the extant biota. Traditionally, transformational series of structure, consisting of sequences of fossils of the same lineage through time, have been employed to reconstruct and interpret morphological evolution. More recently, a move toward an updated paradigm was fueled by the deliberate integration of developmental thinking in the inclusion of fossils in reconstruction of morphological evolution. The vehicle for this is provided by structural fingerprints – recognizable morphological and anatomical structures generated by (and reflective of) the deployment of specific genes and regulatory pathways during development. Furthermore, because the regulation of plant development is both modular and hierarchical in nature, combining structural fingerprints recognized in the fossil record with our understanding of the developmental regulation of those structures produces a powerful tool for understanding plant evolution. This is particularly true when the systematic distribution of specific developmental regulatory mechanisms and modules is viewed within an evolutionary (paleo-evo-devo) framework. Here, we discuss several advances in understanding the processes and patterns of evolution, achieved by tracking structural fingerprints with their underlying regulatory modules across lineages, living and fossil: the role of polar auxin regulation in the cellular patterning of secondary xylem and the parallel evolution of arborescence in lycophytes and seed plants; the morphology and life history of early polysporangiophytes and tracheophytes; the role of modularity in the parallel evolution of leaves in euphyllophytes; leaf meristematic activity and the parallel evolution of venation patterns among euphyllophytes; mosaic deployment of regulatory modules and the diverse modes of secondary growth of euphyllophytes; modularity and hierarchy in developmental regulation and the evolution of equisetophyte reproductive morphology. More generally, inclusion of plant fossils in the evo-devo paradigm has informed discussions on the evolution of growth patterns and growth responses, sporophyte body plans and their homology, sequences of character evolution, and the evolution of reproductive systems.