Abstract: Petrol is considered the most common fire accelerant. However, the identification and classification of petrol sources through the years has been proven to be a challenging field in the investigation of fire debris analysis. This research explored the possibility of identifying petrol sources by high field NMR methods accompanied by ML (Machine Learning). The automated identification and classification of petrol brands were achieved for first time based on the ML clas-sification model developed in this research. A hierarchical classification model was constructed using local classifiers to categorize neat or weathered petrol into its sources.

Addressing the issue of low bonding strength in Ti/Mg laminated composites due to interfacial oxidation, this study employs a differential temperature rolling method using longitudinal induction heating to fabricate Ti/Mg composite plates. The entire process is conducted under an argon gas protective atmosphere, which prevents interfacial oxidation while achieving uniform deformation. The effects of reduction on the mechanical properties and microstructure of the composite plates are thoroughly investigated. Results indicate that as the reduction increases, the bonding strength gradually increases, mainly attributed to the increased mechanical interlocking area and a broader element diffusion layer. This corresponds to a transition from brittle to ductile fracture at the microscopic tensile-shear fracture surface. When the reduction reaches 47.5%, the Ti/Mg interfacial strength reaches 63 MPa, which is approximately a 20% improvement compared to the bonded strength with previous oxidation at the interface. Notably, at a low reduction of 17.5%, the bonding strength is significantly enhanced by about 1 time. Additionally, it is found that a strong bonded interface at high reduction is beneficial in hindering the propagation of interfacial cracks during tensile testing, enhancing the ability of the Ti/Mg composite plates to resist interfacial delamination.

Fires in houses are inevitable and they cause loss of life and major repair costs for the damage structure and contents. There is a clear need to prevent its ignition and spread to adjacent areas. This article presents the steps taken, namely: contacts, data collection, tests, analysis and conclusions regarding the accident resulting from the outbreak and spread of a fire, on December 25, 2020, in a traditional Portuguese house in Arganil, Portugal. The owners and the court requested to carry out an expert opinion by a person with specialized technical-scientific knowledge, which led to this work as an expert. the work consists of carrying out observations and data analysis. Then, the observed and analysed data were laboratory tested in order to consistently identify characteristics that lead to the ignition and propagation of the fire. This work identified construction problems, materials used and heat sources that are responsible for the accident. The conclusions may be used to avoid future incidents or accidents with houses of same construction type.

Within the context of sustainable material development for the construction sector, this study explores the viability of panels composed of recycled newspaper-derived cellulose (9%), rice husk (14%), borax (15%), and polyvinyl acetate-based glue (62%). The methods employed involve water absorption and density tests, following ASTM C-1763 and C-303 standards. The fire resistance test conforming to the European standard UNE 23-725-90, and a mold growth test using AOAC 2002.11. The composite is prone to absorbing a significant amount of water when exposed to humid conditions. However, the incorporation of rice husk and borax can provide benefits such as improved moisture resistance compared to other cellulitic insulators, which may be advantageous in specific climates. Also, the developed composite has an intermediate density compared to other polymeric materials. This characteristic presents advantages in applications that demand a balance between strength and lightness. During the fire resistance tests, the samples with borax presented less fire propagation, and superficial damage compared with the specimens without borax. This is important, considering the fireproofing property, required in building materials. The presence of borax in the composite has an inhibitory effect on the growth of fungi and yeasts. These findings are consistent with previous research. Nevertheless, further research and testing are imperative to assess its viability and performance for commercial applications.

This paper examines the response of the ionosphere to the impact of two moderate geomagnetic storms observed in January 17 and 26-27, 2013 under conditions of strong sudden stratospheric warming. The study uses data from ground-based ionosonde measurements at the Alma-Ata ionospheric station (43.25 N, 76.92 E) combined with optical observation data (The Spectral Airglow Temperature Imager (SATI)). Ionosonde data showed that the geomagnetic storms under consideration do not generate ionospheric storms, but demonstrate some unusual types of diurnal foF2 variations with large (up to 60%) deviations of foF2 from median values observed during the night/morning periods on 13-15 and 20-23 January which do not have any relation to solar or geomagnetic activity. Wave-like disturbances in foF2, h’F and daily averaged foF2 values with quasi-period of 5-8 days and peak-to-peak amplitude from about 1MHz to 2 MHz (from 20% to 40%) and ~40 km are observed during the 9-28 January, after registration the occurrence of the major SSW event on 6-7 January. The observed variations in the OH emission rate are found to be quite similar to those observed in the ionosheric parameters that assume a community of processes in the stratosphere/mesosphere/ionosphere system. The study shows that the F-region of the ionosphere is influenced by processes in the lower ionosphere, in this case by processes associated with sudden stratospheric warming SSW-2013, which led to modification of the structure of the ionosphere and compensation of processes associated with the development of the ionospheric storms.

This research presents a comprehensive framework for efficiently generating forest fire datasets from Google Earth Engine data sources. The primary contribution of this work lies in providing a methodology to swiftly extract forest fire factors without the need for permissions or access to private datasets, rendering the dataset openly accessible and shared without barriers. Furthermore, given that the remote sensing data used is a global dataset, it can be applied in any region without restrictions. In this study, Peninsular Malaysia is chosen as a case study to demonstrate the framework's effectiveness. The generated dataset includes essential variables including the climate and environment, landcover, topography, and anthropogenic factors facilitating the analysis of fire occurrences. The methodology empowers data scientists, enabling them to leverage their analytical skills on the extracted dataset without requiring specialized remote sensing knowledge. Additionally, this study also showcases the adoption of large language models, specifically GPT-4 with the Noteable plugin, as a tool for conducting preliminary analyses on the generated dataset. Sample analyses reveal that several key features, including the KBDI, LST, PDSI, climate water deficit, and precipitation, significantly impact forest fire occurrences in Peninsular Malaysia. Despite the successful application of the GPT-4 with Noteable plugin, certain limitations and challenges are identified, highlighting the necessity for further validation of the tool's applicability and limitations. This study encourages future research to (1) adopt the proposed framework in other regions, (2) explore more detailed analyses encompassing all variables, and (3) leverage machine learning for advanced forecasting.

The distribution and variation of top-of-atmosphere longwave cloud radiative forcing (LCRFTOA) has drawn a significant amout of attention due to its importance in understanding the energy budget. Advancements in sensor and data processing technology, as well as a new generation of geostationary satellites, such as the FengYun-4A (FY-4A), allow for high spatial resolutions that are crucial for real-time radiation monitoring. Nevertheless, there is a distinct lack of official top-of-atmosphere outgoing longwave radiation products under clear-sky conditions (OLRclear). Consequently, this study addresses the challenge of constructing LCRFTOA data with high spatiotemporal resolution over the full disk region of FY-4A. After simulating the influence of atmospheric parameters on OLRclear based on SBDART radiation transfer model (RTM), we developed a model for estimating OLRclear using infrared channels from the advanced geosynchronous radiation imager (AGRI) onboard the FY-4A satellite. The OLRclear results showed an RMSE of 5.05 W/m2 and MBE of 1.59 W/m2 compared to ERA5. Besides, the calculated LCRFTOA results were validated against instantaneous, daily average, and monthly average ERA5 and CERES LCRFTOA products, supporting the validity of the algorithm proposed in this paper. Finally, the changes in LCRFTOA due to variaty cloud heights (high, medium, and low cloud) were analyzed. This study provides the basis for comprehensive studies on the characteristics of top-of atmosphere radiation.

The soils represent a valuable renewable resource on human timescales and interact with distinctive grassland ecosystems characterized by their elevated biodiversity and essential provision of ecosystem services, such as water supply and carbon sequestration. However, knowledge concerning the effects of wildfires on soil properties and nutrient availability remains limited in the Andes. Andean grasslands currently stand as ecosystems most affected by wildfires in the Peruvian Andes. Our objective is to analyze the effect of fire activity on soil physicochemical properties and analyze its social context in Cusco, situated in the southern Andes of Peru. Five soil samples were collected during both the dry and rainy seasons to characterize changes in soil properties. Additionally, the vegetation restored after the wildfire was analyzed. Changes in soil properties subsequent to the fire indicate slight increases in pH, electrical conductivity, organic matter, nitrogen, phosphorus, and potassium during the onset of the rainy season; thereafter, a gradual reduction in these values was observed. This reduction can be attributed to the seasonal rainfall and runoff regime contributing to the leaching process. Our findings suggest that the complete regeneration of vegetation following a wildfire may require approximately four to five years. This assertion is supported by the perceptions of the affected population, as revealed through interviews conducted within two local farming communities. These results hold significance for decision-makers in formulating policies and regulations regarding grasslands and their seasonal restoration.

As Li-ion batteries use is spreading, incidents in large energy storage systems (stationary storage containers, …) or in large-scale cell and battery storages (warehouse, recyclers, …), often leading to fire, are occurring on regular basis. Water remains one of the most efficient fire extinguishing agents for tackling those battery incidents and large quantities are usually necessary. Since bat-teries contains various potentially harmful components (metals and their oxides or salts, sol-vents…) and that thermal runway induced battery incidents are accompanied with complex and potentially multistage fume emissions (containing both gas and particles) the potential impact of fire run-off water on the environment should be considered and assessed carefully. The tests presented in this paper focus on the analysis of the composition of run-off waters used to spray NMC Li-ion modules under thermal runaway. It highlights that waters used for fire-fighting are susceptible to contain many metals, including Ni, Mn, Co, Li and Al mixed with other carbonaceous species (soot, tarballs) and sometimes undecomposed solvents used in the elec-trolyte. Extra-polation of pollutant concentrations compared with PNEC values showed that, for large scale incidents, run-off water could be potentially hazardous to the environment.

Annually, the oak forests of the Zagros Mountain chains, in western Iran and northeastern Iraq, face recurring challenges posed by forest fires, particularly in the Kurdo-Zagrosian forests situated in western Iran and northeastern Iraq. Assessing fire susceptibility relies significantly on vegetation condition. Integrating in situ data, Remote Sensing (RS) data, alongside the integration of Geographical Information Systems (GIS), presents a cost-effective and precise approach to capturing environmental conditions before, during, and after fire events, minimizing the need for extensive fieldwork. This study refines and applies the Zagros Grass Index (ZGI), a local vegetation index tailored to discern between grass-covered surfaces from tree canopies in Zagros forests, identifying the grass masses as the most flammable fuel type. Utilizing Moderate Resolution Imaging Spectroradiometer (MODIS) Normalized Difference Vegetation Index (NDVI) product as input, from 2013 to 2022, the ZGI aims to mitigate the influence of tree canopies, isolating NDVI values solely attributable to grass cover. By incorporating phenological characteristics of forest trees and grass species, the ZGI outperforms NDVI in mapping grass-covered areas that are crucial for fire susceptibility assessment in the study region. Results demonstrate a strong overlap between ZGI-based maps and recorded fire occurrences, validating the efficacy of the index in fire susceptibility estimation.

Grasping the spatial and temporal patterns of forest fires, along with the key factors that drive them and the ability to forecast such events accurately, is essential for the successful management of forests. In China's southern region, forest fires significantly endanger the ecological system, public safety, and economic well-being. Through the application of Geographic Information Systems (GIS) and LightGBM (Light Gradient Boosting Machine) model, this study investigates the determinants of fire incidents and formulates a predictive model for forest fire occurrences, alongside a zoning strategy, within the Central-South area. The results indicate: (i) Spatially, fire points exhibit significant clustering and autocorrelation characteristics; (ii) The Central-South Forest Fire Prediction Model shows exceptional accuracy, reliability, and predictive power, with high performance metrics across training and validation sets, including over 85% accuracy, precision, recall, and F1 scores, along with AUC values above 89%, underscoring its efficacy in forecasting forest fires and distinguishing between fire events; (iii) Throughout the year, forest fire risks in the Central-South region of China vary by region and season, with risk spikes from March to May in Guangdong, Guangxi, Hunan, Hubei, and Hainan. From June to August, localized risks are observed in Heyuan and Huangshi, while from September to November, an increase in risk is noted in Guangdong (Meizhou, Heyuan, Shaoguan), Guangxi (Nanning, Hezhou, Yulin), and Hunan (Binzhou, Yongzhou, Hengyang) due to cooler, drier conditions and leaf litter accumulation. From December to February, the risk continues in specific areas across Guangdong, Guangxi, Hunan, and Hubei.

The Source Region of the Yellow River (SRYR), renowned as the "Water Tower of the Yellow River", serves as an important water conservation domain in the upper reaches of the Yellow River, significantly influencing water resources within the basin. Based on the Weather Research and Forecasting (WRF) Model Hydrological modeling system (WRF-Hydro) model, the key variables of the atmosphere-land-hydrology coupling processes over the SRYR during the 2013 rainy season are analyzed. The investigation involves a comparative analysis between the coupled WRF-Hydro and the standalone WRF simulations, focusing on the hydrological response to the atmosphere. The results reveal that the WRF-Hydro model's proficiency in depicting streamflow variations over the SRYR, yielding a Nash Efficiency Coefficient (NSE) of 0.44 and of  0.61 during the calibration and validation periods, respectively. Compared to the standalone WRF simulations, the coupled WRF-Hydro model demonstrates enhanced performance in soil heat fluxes simulations, reducing the mean Root Mean Square Error (RMSE) of surface soil temperature by 0.96 K and soil moisture by 0.01 m\textsuperscript{\textsuperscript{3}}/m\textsuperscript{\textsuperscript{3}}. Furthermore, the coupled model adeptly captures the streamflow variation characteristics with the NSE of 0.33. This underscores the significant potential of the coupled WRF-Hydro model for delineating coupled atmosphere-land-hydrology processes in regions characterized by cold climates and intricate topography.

In our digital era, digital platforms become an unprecedented opportunities for manufacturing enterprises to leverage their business strategy. This study investigates how manufacturing enterprises can enhance organizational duality through digital platforms. Specifically, this study examines the effect of digital platforms and capability reconfiguration on entrepreneurial organizational duality. The study also examines how network digital atmosphere moderates this relationship. Based on analysis of 286 manufacturing enterprises undergoing digital transformation, the results indicate that digital platforms positively affect both organizational duality and the capability reconfiguration. The results indicate that digital platforms have a positive indirect effect on organizational duality via evolutionary capability reconfiguration and substitutional capability reconfiguration, respectively. The study also shows that network digital atmosphere moderate this effect.These findings contribute theoretically to the research on digital platforms and manufacturing enterprises while also providing important managerial implications for policymakers and manufacturing enterprises to help firms implement digital strategies.

In this study, seven mortar mixes were prepared by replacing natural sand by crumb rubber ,CR, (10%, 25%, 50%, 60%, 75% and 100%). The properties of mortars, both in their fresh and hardened states, were studied. Key characterisitcs, including density, water absorption coefficient, porosity, thermal conductivity, heat capacity, shrinkage/swelling, elastic modulus, compressive strength, flexure strength, fracture energy and performance after exposure to heat, were evaluated. The results obtained showed that as the CR fraction increased, density, initial setting time, and workability decreased but mortars with CR fractions ranged between 25% and 50% are lightweight and can be used for repairing as they fulfill satndards. It was observed that strengths and stiffness decreased with higher CR content while shrinkage increased for CR percentage higher than 60%. However, up to 50% of CR content the mortars obey to the standards for repair. Interestingly, incorporating up to 50% waste tires proved to improve comfort and thermal resistance without affecting thermal inertia. A slight increase in the mass loss is observed when mortars are exposed to high temperatures. Mortars containing CR between 25% and 50% can be classified as lightweight and thermally insulating mortars, suitable for repairing concrete structures in accordance with industry standards.

Wildfires are important natural drivers of forest stands dynamics, strongly influencing on their natural regeneration and ecosystem services. This paper presents a comprehensive analysis of spatiotemporal burnt area (BA) patterns over the period 2000–2022 in the Middle Volga region of the Russian Federation on the base of remote sensing time series, considering the impact of cli-matic factors on forest fires. The temporal trends were assessed with the Mann-Kendall nonpara-metric statistical test and Theil-Sen’s slope estimator using the LandTrendr algorithm on the Google Earth Platform (GEE). The accuracy assessment indicated a high overall accuracy (> 84%) and F-score value (> 82%) for forest burnt area detection as evaluated against 581 test sites of ref-erence data. The results revealed that the fire occurrences in the region were mainly irregular with the highest frequency of 7.3 over a 22-year period. The total forest BA was about 280 thousand ha, which equals to 1.7% of the land surface area or 4.0% of the total forested area under study in the Middle Volga region. The coniferous forest stands are the most fire-prone ecosystems accounting for 59.0 % of the total BA; deciduous stands accounts for 25.1%; and insignificant fire occurrences were registered in young forests and shrub lands. On a seasonal scale, temperature generally has a greater impact on the BA than precipitation and wind speed.

Through long-term Rayleigh lidar observations during 2010-2022, atmospheric gravity wave (AGW) activities in the middle atmosphere (30–65 km) are statistically investigated at Haikou (110.3°E, 19.9°N) in China. In total, 827 quasi-monochromatic AGW events are identified from the lidar dataset, and the vertical wavelength, observed wave period, and vertical propagation direction of dominant waves are extracted for each AGW event by analyzing the power spectra of wave-induced temperature perturbations. It is revealed that 81.7% of all AGW events were associated with upward-propagating waves, and the proportion of upward-propagating AGWs reached a maximum in autumn and a minimum in winter. The most common vertical wavelengths and wave periods were 6–11 km and 4–10 hours, respectively. In particular, 68 AGW events associated with simultaneous upward and downward propagating waves were observed by lidar, corresponding to 8.2% of the events. The occurrence of such special AGW phenomena is qualitatively discussed, and multiple formation mechanisms may exist. Comparisons are made with previously reported lidar observation results, and the statistical features of AGW activity in the low-latitude middle atmosphere may vary over a relatively wide range depending on the location and altitude. However, a majority of AGWs propagate upward in the middle atmosphere.

In the present work we have studied the short-term edaphic recovery of a burned pine forest of Pinus pinaster Aiton in Cerro del Castillo (Sierra de Guadarrama, Central Spain) in which a hydrological-forestry restoration was being carried out after the fire occurred in July 2022. For this purpose, variations in physicochemical properties (conductivity, relative humidity, organic matter and pH) and collembolan communities were analyzed by comparing the soils of a natural pine forest and a burned pine forest during the 24 weeks after the fire in 3 different samplings. With the data obtained, a series of diversity indices were calculated and statistical analyses such as ANOVA, hierarchical classification and principal component analysis were developed, with the aim of understanding in greater depth the recovery of collembolan populations, the changes in these physicochemical variables and the relationships between both parameters. This study shows how the fire reduced the amount of organic matter and water, and increased soil pH and conductivity, affecting edaphic fauna populations. In the short term, there was an increase in relative humidity and a decrease in electrical conductivity. The edaphic fauna communities of the burned pine forest increased their diversity and equity without reaching the values of the natural pine forest. At the specific level, however, the springtail populations matched the richness and even reached a very slightly higher Shanon-Wiener diversity index than that the natural pine forest populations in just 24 weeks. Finally, it was observed that the samples from the burned pine forest with recovered collembolan populations had the closest physicochemical parameters to those of the natural pine forest.

Tularemia is a zoonotic disease caused by {\it Francisella tularensis} bacteria, a gram-negative coccobacillus-shaped bacterium. There are multiple transmission routes of the infection to humans such as consumption of contaminated food or water, handling of infected animals or bites from {\it haematophagous} arthropods (such as ticks, deer flies, or mosquitoes). In this study we focus on transmission via the bites of ticks and developed a deterministic model of ordinary and impulsive differential equations to gain insight in the differential effect of prescribed fire on {\it Demacenta variablis} and {\it Amblyomma americanum} ticks and the prevalence of tularemina. We found that prescribed fire differentially reduce the number of the two ticks with {\it A. americanum} reduced the least compare to {\it D. variablis} subsequently leading to differential increase of tularemia new infected cases in humans and rodents. Our result further indicates that the spatial arrangement of burn against unburn areas may not matter as either arrangement led to fewer ticks and reduction in tularemia transmission when prescribed fire was implemented. The results of this study provide important new understandings of the intricate effect of prescribed fire on tick species, and the dynamics of the tick-borne disease, tularemia disease in this study.

Post-earthquake fire is considered as a catastrophic secondary disaster to personal and property safety. In this article, an evacuation assessment of a complex rail transit station under the post-earthquake fire for sustainable buildings was conducted from the internal environment and external rescue based on Building Information Modeling (BIM) and Fire Dynamic Simulation (FDS). The internal environment evacuation assessment simulation experiments were conducted in six hypothetical high-risk scenarios. Besides, the external rescue assessment was based on investigation of the route and the rescue time required during different periods of holidays and workdays. The results show that: (1) The influence caused by different size of fire area in the power distribution room is smaller than those in the train at the platform floor. (2) In the case of fire scenarios with the same fire area but different fire locations, the impact on temperature is greater than that on CO concentration in power distribution room. (3) It shows slight differences between single-floor fire and double-floor fire on evacuation of small area fire in power distribu-tion room. Meanwhile, optimized design recommendations are proposed to reduce the risk of emergency evacuation in both internal and external environments of rail transit stations for sustainable future buildings.

A two-way coupled model between polydisperse particle phases with compressible gases and a density-based coupling implicit solution method combining the third-order MUSCL with QUICK spatial discretization scheme and the second-order temporal discretization scheme are constructed based on the discrete-phase model (DPM) and the stochastic wander model (DRWM) in the Eu-lerian-Lagrangian framework in conjunction with a unitary particulate source (PSIC) approach and the SST k-ω turbulence model. The accuracy of the numerical prediction method is verified using previous supersonic nozzle gas-solid two-phase flow experiments. Numerical simulation of two-phase jet of dry powder extinguishing agent gas with pilot-type supersonic nozzle was carried out to analyze the influence of geometrical parameters such as length ratio rL and area ratio rA of main nozzle on the two-phase flow field as well as on the jet performance indexes such as particle mean velocity vp,a, velocity inhomogeneity Φvp, particle dispersion Ψp, particle mean acceleration ap,a and so on. By analyzing the parameters, we indicate the requirements for the combination of jet performance metrics for different flame types such as penetrating, spreading, and dispersing.

Abstract: Wildfires in forest ecosystems exert substantial ecological, economic, and social impacts. The effectiveness of fire management hinges on precise pre‐fire risk assessments to inform mitigation efforts. This study aims to investigate the relationship between predictions from pre‐fire risk assessments and outcomes observed through post‐fire burn severity analyses. In this study, forest fire risk was assessed with the Fuzzy Analytical Hierarchy Process, in which fire behavior factors were used as input. The degree of burn was determined using the Random Forest method using 11519 training points and 400 test points on Sentinel‐2 satellite images in three different classes. According to the results obtained from 266 selected test points located within the forest boundaries, all primary factors showed an increased effect in areas with high burn severity. Climate, in particular, emerged as the most influential factor, accounting for 52% of the overall impact. However, in cases of high fire severity, climate proved to be the most effective risk factor, ac‐counting for 67%. It followed by topography with 50% accuracy at high fire intensity. In the risk assessment is based on the FAHP method, climate was assigned the highest weight value among other factors with 32.2%. Topography emerged as the second most effective risk factor with 27 %. To evaluate the results more comprehensively both visually and statistically, two regions with different stand canopy characteristics were selected within the study area. While high burn severity had the highest accuracy in Case 1 area, moderate burn severity had the highest in Case 2 area. During the days when the fire continued, the direction of spread was obtained from MODIS images. In this way, the fire severity depending on the direction of fire progression was also interpreted. Through an analysis of various case studies and existing literature, the research underscores both the strengths and limitations inherent in predicting forest fire behavior‐based pre‐fire risk assessments. Furthermore, it emphasizes the necessity of continuous improvement to increase the success of forest fire management.

The exposure of Mediterranean forests to large wildfires requires mechanisms to prevent and mitigate their negative effects on the territory and ecosystems. Fuel models synthesize the complexity and heterogeneity of forest fuels and allow understanding and modelling of fire behavior. However, it is sometimes challenging to define the fuel type in a structurally heterogeneous forest stand due to the mixture of characteristics from different types and limitations of qualitative field observation and passive and active airborne remote sensing. This can impact the performance of classification models that rely on in situ identification of fuel type as ground-truth, which can lead to a mistaken prediction of fuel types over larger areas in fire prediction models. In this study, a handheld mobile laser scanner (HMLS) system were used to assess its capability to define Prometheus fuel types in 43 forest plots in Aragón (NE Spain). The HMLS system captured the vertical and horizontal distribution of fuel at extremely high resolution to derive high-density three-dimensional point clouds (average: 63,148 points/m2) which were discretized into voxels of 0.05 m3. The total number of voxels in each 5 cm height stratum was calculated to quantify the fuel volume in each stratum, providing the vertical distribution of fuels (m3/m2) for each plot at centimetric scale. Additionally, fuel volume was computed for each Prometheus height stratum (0.60, 2, and 4 m) for each plot. The Prometheus fuel types were satisfactory identified for each plot, which was compared with the fuel type estimated in the field. This led to the modification of the ground-truth in 10 out of the 43 plots, with estimation errors between types 2–3, 5–6, and 6–7. These results demonstrate the ability of HMLS systems to capture fuel heterogeneity at centimetric scales for the definition of fuel types in Mediterranean forests, making them powerful tools for fuel mapping and fire modelling, and ultimately for improving wildfire prevention and forest management.

In Summer 2017, huge wildfires in the British Columbia region (Canada) led to the injection of a remarkably high concentration of biomass burning aerosol in the atmosphere. These aerosol masses reached the city of Naples, Italy, since the end of August 2017, where they were characterized by means of a multiwavelength lidar and a sun-sky-lunar photometer. Here we report on the optical and microphysical properties of this aerosol in an intriguing condition, occurring on 4th September 2017, which is characterized by an interesting multi-layered vertical distribution of the aerosol. The Lidar profiles highlighted the presence of four aerosol layers, with two located in the lower troposphere and other two at stratospheric altitudes. A rather thorough characterization of the biomass burning aerosol was carried out. The aerosol depolarization ratio showed an increasing dependence on the altitude with averaged values of 2-4% for the tropospheric layers, which are indicative of almost spherical smoke particles, and larger values in the stratospheric layers, suggestive of aspheric particles. Lidar-derived size distributions were retrieved for the first three aerosol layers, highlighting a higher particle concentration in the fine mode fraction for the layers observed at higher altitude. A dominance of fine particles in the atmosphere (Fine Mode Fraction > 0.8) with low absorption properties (absorption AOD < 0.0025 and SSA > 0.97) was also observed over the whole atmospheric column by sun-photometer data. The space-resolved results provided by the lidar data are consistent with the columnar features retrieved by the AERONET sun-photometer, thus evidencing the reliability and capability of lidar characterization of atmospheric aerosol in a very interesting condition of multiple aerosol layers originating from Canadian fires overpassing the observation station.

Fires are a significant threat to people, property, and environment. One of the requirements for the buildings during fires is ensuring the safe evacuation of persons. The evacuation assessment has usually been based on a comparison of the Required Safe Egress Time (RSET) and the Available Safe Egress Time (ASET). One of the important factors influencing the safe evacuation of persons is smoke, which is an important accompanying phenomenon in the burning of polymers. The smoke layer interface is one basic barrier for effective evacuation. The current calculation technique for assessing the smoke layer interface in the Czech Republic is unsatisfactory. For this reason, a calculation technique CSN has been derived, which has been compared with the selected simple calculation techniques, the zone fire model Consolidated Model of Fire and Smoke Transport (CFAST) and the field type model Fire Dynamics Simulator (FDS). The CSN technique was also compared with a real large-scale experiment. The data were also subjected to statistical evaluation using the root mean square error method (RMSE). The deviations between the NFPA, ISO and CSN calculation techniques, the CFAST and FDS fire models and the implemented experiment ranged from 0.05 to 2.41. The established deviations indicate that the calculation technique CSN will be practically usable.

Fire hazards present a multifaceted global challenge that endangers human lives and environmental safety. Despite advancements in fire risk management technologies and methods, fires continue to be a prime concern for human security. The Arabian Gulf region, influenced by its climatic and environmental conditions, is especially susceptible to these threats. The Emirate of Sharjah, part of the United Arab Emirates, has made significant progress in reinforcing fire safety measures within residential structures, achieving a decrease in the number of fire-related accidents compared to neighboring Emirates. However, the incidence rate remains relatively high. This study undertook a thorough review and assessment of the existing Fire Management System (FMS) for Sharjah's residential sector, leading to the recommendation of a more robust framework. Through a series of literature reviews, interviews with stakeholders, and surveys, using analytical techniques such as the Delphi method and Failure Mode Effect and Criticality Analysis, vital factors that influence the FMS's effectiveness were pinpointed. The study exposed that the current FMS was largely reactive. In response, a proactive framework incorporating nine essential components was designed to strengthen the Sharjah FMS. These components span across various domains such as fire assurance, assessment of fire risks, management of accidents, evaluation of performance, training programs, research and development initiatives, digital services, monitoring of regulatory compliance, firefighting strategies, automated responses to fires, recovery processes, as well as the use of resilient materials and architectural design considerations. Furthermore, the research introduced two specific fire indexes, the HRBFI and the EFRI. Anchored in the principles of Systems Thinking and Industry 4.0, this proposed framework is aimed at streamlining Sharjah's approach to fire management in dwellings, with the objective of diminishing the frequency of fire incidents yearly. The ultimate aspiration of this framework is to enhance the Emirate's standing in terms of safety and to guarantee a living environment that is safeguarded against the risk of fires..

Despite being considered as natural components of many ecosystems, forest fires pose significant threats to the environment and human health. In order to ensure public safety and effective fire suppression planning, it is necessary to develop reliable prediction models to mitigate forest fire danger. These models should account for specific environmental conditions. The advent of big data in recent years has opened new avenues for improving forest fire predictions. Machine learning techniques, surpassing traditional forecasting methods, have shown significant promise in this area. By applying the Cross-Industry Standard Process for Data Mining (CRISP-DM) methodology to a real-world dataset, this paper explores the application of machine learning approaches to understand forest fire patterns and predict fire danger. We consider six distinct time stages and incorporate feature selection to refine our predictions. It is important to note that forest fire behavior models are not universally effective due to geographical variations in data. Nevertheless, advanced decision-making techniques are vital in forest fire management. Our research presents a systematic exploration of the topic, comparing various machine learning models, thereby providing a comprehensive baseline for future investigations in this crucial environmental arena.

This project involves the development of Fire Suppression System (FSS) leveraging of Home automation system using Graphical System design (LabVIEW) software and Arduino microcontroller for real-time monitoring and control. The system integrates an Infrared (IR) flame sensor, an MQ2 gas sensor to detect and suppress fire hazards efficiently. The LabVIEW interface facilitates real-time monitoring of sensor data, allowing users to visualize and analyze the environmental conditions. Through this system, fires are automatically subdued, enhancing safety without requiring human intervention. This advances fire safety by swiftly containing threats and minimizing potential damage.

Experimental quantification of retention factors related to post-fire strength as well as post-fire ductility of intentionally selected stainless steel grades applied in construction is the objective of research presented here. These steel grades are characterized by a two-phase austenitic-ferritic microstructure of the duplex type. In this context two mutually corresponding chromium-nickel-molybdenum steel grades have been subjected to analysis, namely X2CrNiMoN22-5-3 steel belonging to the standard duplex group (DSS 22% Cr) and X2CrMnNiN21-5-1 steel belonging to the lean duplex group (LDSS). The similarities and differences in the mechanical properties exhibited by these steel grades after effective cooling, following more or less prolonged simulated fire action conforming to several development scenarios, have been identified and indicated. The resistance of given steel grade to permanent structural changes induced by the heating program proved to be the critical factor determining these properties and resulting in many cases in increased susceptibility to brittle fracture.

The enormous potential of renewable bioresources is expected to play a key role in the development of the EU’s sustainable circular economy. In this context, inexhaustible, biodegradable, non-toxic and carbon-neutral forest-origin resources are very attractive for the development of novel sustainable products. The main structural component of wood is cellulose, which, in turn, is the feedstock of nanocellulose, one of the most explored nanomaterials. Different applications of nanocellulose have been proposed, including packaging, functional coatings, insulating materials, nanocomposite fields among others. However, the intrinsic flammability of nanocellulose restricts its use in some industries where fire risk is a concern. This paper overviews the most recent studies of the fire resistance of nanocellulose-based materials, focusing on thin films, coatings and aerogels. Along with effectiveness, increased attention to sustainable approaches is considered in developing novel fire-resistant coatings. The great potential of bio-based fire-resistant materials, combined with conventional non-halogenated fire retardants FRs, has been established. The formulation methods, types of fire retardants and their action modes, and methods used for analysing fire retardancy are discussed in the frame of this overview.

When the formation flying consists of satellites that are independent from each other and forms a virtual synthetic aperture telescope that replaces a single large telescope with all of its optical elements it is required mutual coordination between the satellites with high accuracy in order to achieve good optical observations. In this paper we consider the problem of developing a control system for a tetrahedral satellite formation flying representing a synthetic aperture telescope in the geostationary orbit for high resolution monitoring of fire in the forest area in infrared spectrum. Synthesizing the image with good quality requires to keep the configuration of formation with µm-class accuracy. Study of dynamics of passive uncontrolled motion of formation flying showed a significant deviation of the configuration from the required shape with a high frequency due to the action of gravitational forces. To keep the configuration in the required form with µm accuracy the analysis of efficiency of various controllers was carried out in the process of numerical simulation. The simulation results made it possible to highlight the features of using various approaches to the development of control system for the satellite formation flying representing a synthetic aperture telescope.

Polyurethane is used extensively in the furniture industry, primarily in beds and sofas. There is a significant volume of research pertaining to the flammability of polyurethane materials, but very little regarding smoke toxicity. Given toxic fire effluents are a primary cause of injury and fatalities, more work needs to be done to test the toxicity of polyurethane materials and the fire retardants they are coated/bound with. The aim of the review is to provide a comprehensive analysis of the decomposition of polyurethane and discuss the development and application of modern fire retardants and their effect on smoke toxicity. This work then provides discussion on the challenges faced when attempting to quantify the toxicity of the effluent produced during combustion. Future work should aim to reduce the toxicity and flammability of polyurethane simultaneously by; reducing the pyrolysis of the polymer, preventing the escape of volatile products, reducing radicals within the system and lowering the temperature of the system. Before this can be achieved, a better understanding of smoke toxicity and the ability to test materials is needed.

Tropical sea surface temperature (SST) variability, mainly driven by the El Niño–Southern Oscillation (ENSO), influences the atmospheric circulation and hence the transport of heat and chemical species in both the troposphere and stratosphere. This paper uses Met Office, ERA5 and MERRA2 reanalysis data to examine the impact of SST variability on the dynamics of the polar stratosphere and ozone layer over the period 1980 to 2020. Particular attention is paid to studying the differences in the influence of different types of ENSO (East Pacific (EP) and Central Pacific (CP)) for the El Niño and La Niña phases. It is shown that during the EP El Niño, the zonal wind weakens more strongly and changes direction more often than during the EP El Niño, and the CP El Niño leads to a more rapid decay of the polar vortex (PV), an increase in stratospheric air temperature and an increase in the concentration and total column ozone than during EP El Niño. For the CP La Niña, the PV is more stable, which often leads to a significant decrease in Arctic ozone. During EP La Niña, powerful sudden stratospheric warmings are often observed, which lead to the destruction of PV and an increase in column ozone.

Photoelectric smoke detectors are the most cost-effective devices for very early fire alarms. However, due to different light intensity response values for different fire smoke and interference from interferential aerosols, they have a high false alarm rate, which limits their popularity in Chinese homes. To address these issues, an embedded spatial-temporal convolutional neural network (EST-CNN) model is proposed for real fire smokes identification and aerosols (fire smokes and interferential aerosol) classification. EST-CNN consists of three modules including information fusion, scattering feature extraction, and aerosol classification. Moreover, a two dimensional spatial-temporal scattering (2D-TS) matrix is designed to fuse the scattered light intensities in different channels and adjacent time slices, which is the output of the information fusion module and the input of the scattering feature extraction module. EST-CNN is trained and tested with experimental data measured on the established fire test platform using the developed dual-wavelength dual-angle photoelectric smoke detector. The optimal network parameters are selected through extensive experiments resulting in an average classification accuracy of 95.6% for different aerosols with only 66 kB network parameters. The experimental results demonstrate the feasibility of the designed EST-CNN model to be directly installed in existing commercial photoelectric smoke detectors to realize aerosol classification.

The paper presents the main experimental capabilities of the automatic system for the study of the interaction between porous media and atmosphere. This system is one of the possible variants of patent 2-241-477. The paper shows the result of a drying and wetting study of a tailings sample. The sample is 32 cm in height and 29 cm in diameter. The saturation and drying process was carried out at 26 degrees Celsius at the sample surface, an air velocity of 2 m/s and a relative humidity of 60%. The recharge applied to the column surface was 0.3 cm3/cm2/minute. The results show the effectiveness of the system in controlling the spatial-temporal variation of different physical properties of the porous medium in the vertical and surface profile. The controlled variables include volumetric water content, suction, relative humidity, sample weight variation due to recharge or drying, shrinkage, temperature, etc. The experiment shows how the tailings saturate very quickly but dry very slowly. Tailings consolidation occurs in the drying and wetting processes, being higher in the first one.

This study focuses on the increased risk of high heat release and asphyxiation (toxic gas poisoning) in the event of a fire of polyurethane (PU) and MDF-based building materials, which are commonly used in building fires. Among them, polyurethane (PU) building materials are essential for buildings except in Europe and some other countries due to their excellent thermal insulation performance, but problems of short-term heat release and spread of toxic gases in the event of a fire continue to occur. To overcome these problems, researchers are actively working on introducing various flame retardants into building materials. Therefore, in this study, we produced a laboratory-sized (500mm*500mm) plate flame retardant board that can be utilized as a building material with a lower heat release rate and a lower toxicity index by mixing expanded graphite and ceramic binder as flame retardants in a main material based on the cellulose of waste paper by replacing the existing building materials with a hot-press method. According to the ISO-5660-1 test on the heat release rate of the plate flame retardant board, the THR value was 2.9 (MJ/m2) for 10 minutes, showing an effect of reducing the THR value by 36.3 (MJ/m2) compared to the THR value of 39.2 (MJ/m2) of the specimen made using only paper. In addition, the toxicity index of the flame retardant board was checked through the NES 713 test. As a result, the test specimen showed a toxicity index of 0.7, which is 2.4 lower than the toxicity index of 3.1 of MDF, which is utilized as a conventional building material. Based on the results of this study, the cellulose fire retardant board showed the effect of reducing the heat release rate and toxicity index of building materials in a building fire, which reduces the risk of rapid heat spread and smoke toxicity. This has the potential to improve the evacuation time (A-SET) of evacuees in fires. It is also important to show that recycling waste paper and utilizing it as the main material for building materials can be an alternative in terms of sustainable development.

The spontaneous combustion of coal in goaf is the main cause of mine fire at present. Lignite has become a major hidden danger in mine production safety because of its easy oxidation. In this paper, an innovative strategy was proposed to inhibit the spontaneous combustion of lignite by using the principle of microbial-induced calcium deposition. Based on the optimized culture method, a novel composite inhibitor of Bacillus pasteurelli was prepared. SEM, pore size analysis and FT-IR experiments were carried out simultaneously, and the oxidation properties of lignite before and after inhibition were quantitatively characterized from the perspective of microstructure, and the flame retardant properties of microbial and chemical retardants on coal samples were compared. The results show that a large number of deposited calcium carbonate particles are obviously attached to the surface of lignite after microbial inhibition treatment, which plays a physical oxygen insulation role. At the same time, the total pore volume and specific surface area of the coal sample decreased by 68.49% and 74.01%, respectively, indicating that microbial inhibitors can effectively plug the primary pores of lignite. Based on the peak measurement of 400-4000cm-1 infrared spectrum of coal samples, it is found that the contents of active groups including hydroxyl, carboxyl and methyl/methylene in lignite molecules after microbial inhibition are lower than those in raw coal, especially the methyl/methylene content involved in the initial oxidation reaction decreased by 96.5% compared with the baseline content in raw coal. The results show that the oxidation and self-heating capacity of lignite after microbial inhibition is effectively restrained in the initial spontaneous combustion. The research results of this paper can provide effective solutions for the prevention and control of coal spontaneous combustion risk in mined-out area.

Prescriptions for fuels management are universally applied across forest types in British Columbia, Canada, to reduce fire behaviour potential in the wildland-urban interface. Fuel thinning treatments are assumed to reduce the potential for sustained ignition and crown fire initiation by reducing surface fuel loading. We hypothesized that these prescriptions are not appropriate for the coastal wet forests in the Whistler region of the province. Our study measured the efficacy of fuel thinning treatments in four stands located in the Whistler community forest. We examined several in-stand microclimate variables during snow melt in the spring and at the height of fire danger in late summer, at thinned and unthinned locations paired using GIS- analysis. We found that thinning increased the wildfire risk based on the differences between unthinned and thinned areas in the same forest stand.

Post-harvest handling and ripening techniques have an impact on peach quality and shelf life, which has a big impact on consumer satisfaction and market competitiveness. This review paper examines recent advancements in ripening techniques and post-harvest technologies with the goal of improving peach fruit quality and sustainability. The factors impacting fruit quality after harvest and the physiological changes that occur throughout peach ripening are fully explained. For maintaining peach freshness and reducing losses, novel handling methods like modified atmosphere packaging (MAP) and controlled atmosphere storage (CAS) have been investigated. The study explores the possibilities of nanotechnology applications and low-temperature storage for prolonging shelf life while maintaining texture, flavor, and aroma. Examining the effectiveness and waste reduction potential of automation and mechanization in post-harvest activities. The paper also discusses ethylene-based and non-ethylene-based ripening agents, as well as innovative techniques including gene editing and RNAi technology for controlled and delayed ripening. Analyses are done on how these technologies affect the sensory qualities and nutrient profiles of peaches. The study emphasizes the significance of sustainable practices in the peach industry by focusing on waste reduction, resource efficiency, and circular economy integration. Post-harvest technologies' potential environmental consequences have been taken into consideration and the paper encourages more study and cooperation to increase sustainability.

As major natural disasters in grassland areas, fires and dust events seriously threaten human safety, property, and animal husbandry. Furthermore, these phenomena may be mutually reinforcing, which can lead to more severe cascading disasters. However, few studies have been on the mechanisms of grassland fire and dust events disaster chain. Therefore, we selected Dornod aimag (province), a typical temperate grassland, as the study area and analyzed the spatiotemporal variation patterns of grassland fires and dust weather, as well as the effect of grassland fires on dust weather based on MCD64A1 Burnt Area data and SYNOP dust data. The mechanism of grassland fires on dust weather was further investigated using the MOD13A3 vegetation index product and ERA5 wind speed, wind direction, and precipitation data. The results revealed that grassland fires and dust weather varied spatially across the study area. Furthermore, grassland fires occurred mainly in spring (April to May), summer (June), and autumn (October), while dust weather mainly occurred in spring (March to May). Moreover, autumn, winter, and spring cumulative grassland fires (both days and area) substantially affected the spring total dust weather days and dust storm days, particularly the spring cumulative dust storm days. Additionally, higher precipitation in the summer of 2014 resulted in higher vegetation coverage and more fuel in the autumn and winter of 2014, and even in the spring of 2015. As a result, the cumulative grassland fire days was higher, and the area was larger from September 2014 to April 2015, leading to a considerable increase in the cumulative dust storm days in May 2015. This study has important implications for disaster prevention and mitigation, ecological and environmental protection, and sustainable development in grasslands.

Optimum postharvest storage conditions increase the shelf life and postharvest quality of horticultural crops. The effects of forced-air precooling (FAP) and modified atmosphere packaging (MAP) on shelf life, physicochemical quality, and health-promoting properties of bell pepper (Capsicum annuum L. cv. Nagano) harvested at 90% and 50% coloring stages in May and July respectively, stored at 11℃, 95% relative humidity were assessed. Fruits were treated with FAP + 30 μm polyethylene liner (FOLO), FAP (FOLX), 30 μm polyethylene liner (FXLO), and control (FXLX). The quality attributes, viz. weight loss, firmness, color, SSC, soluble sugars, TPC, TFC, DPPH, and ABTS were evaluated. FOLO maintained sensory quality (weight loss, firmness, and color), physicochemical (soluble solids content and soluble sugars), and health-promoting properties compared to other treatments during storage. The investigated parameters differed significantly (p < 0.05) among treatments except soluble sugars. The 50% coloring fruits had a huge variation between treatments than 90% coloring. The results revealed more TPC and antioxidant capacity in 50% than in 90% coloring fruits. The study highlights the need to consider the ideal fruit coloring stage at harvest under the effect of FAP and MAP treatments in preserving bell pepper's postharvest quality and shelf life.

This paper uses probability method to evaluate the fire safety performance of prestressed steel-concrete beam bridges based on simulation experimental research. Firstly, fire simulation experimental sample analysis was conducted on actual small box girder bridges to obtain the structural response of prestressed steel-concrete structures under fire, which is in line with engineering practice. Next, construct a reliability analysis model for the fire resistance performance of prestressed steel-concrete beam bridges; Combining reliability theory with finite element method, establish a reliability analysis method for the fire resistance performance of prestressed steel-concrete beam bridges. Subsequently, a safety factor evaluation model for the fire resistance performance of prestressed steel-concrete beam bridges was proposed, and a safety factor evaluation method for the fire resistance performance of prestressed steel-concrete beam bridges based on reliability back analysis was established. Finally, based on the analysis of the structural response after a fire in a specific case of a simply supported to continuous prestressed steel-concrete continuous beam bridge project, a structural resistance sample of the prestressed steel-concrete beam bridge is generated through uniform design method, and statistical analysis is conducted. Subsequently, probability methods are used to evaluate the safety of the prestressed steel-concrete beam bridge after a fire. Through analysis, it can be concluded that the time of fire has a significant impact on the structural performance of prestressed steel-concrete beam bridges, and the randomness of parameters has a significant impact on the safety reserve of prestressed steel-concrete beam bridges after fire. It is necessary to pay attention to it in specific engineering practice and strengthen the monitoring and statistics of structural random characteristics.

Fire outbreaks continue to cause damage despite the improvements in fire-detection tools and algorithms. It is still challenging to implement a well performing and optimized approach, which is sufficiently accurate, and has tractable complexity and low false alarming rate. Small amount of fire and identification of fire from a long distance is also a challenge in previously proposed techniques. In this study, we propose a novel hybrid model based on Convolutional Neural Networks (CNN) to detect and analyze fire intensity. 21 convolutional layers, 24 Rectified Linear Unit (ReLU) layers, 6 pooling layers, 3 fully connected layers, 2 dropout layers, and a softmax layer are included in the proposed 57-layer CNN model. Our proposed model performs instance segmentation in order to distinguish between fire and non-fire events. To reduce the intricacy of the proposed model, we also propose a key-frame extraction algorithm. The proposed model uses Internet of Things (IoT) devices to alert the relevant person by calculating the severity of fire. Our proposed model is tested on a publicly available dataset having fire and normal videos. The achievement of 95.25 % classification accuracy, 0.09% False Positive Rate (FPR), 0.65 percent False Negative Rate (FNR), and a prediction time of 0.08 seconds validates the proposed system.

This study evaluated gas mixtures of carbon dioxide (CO2) associated with nitrogen (N2) as al-ternatives to the use of CO2 in two phases to improve the welfare of broiler chickens at slaugh-ter. Broilers were exposed to one of three treatments: 40C90C (1st phase: <40% CO2 for 2 min; 2nd phase: >90% CO2 and <2% O2 for 2 min, n=92), 40C60N (40% CO2, 60% N2 and <2% O2 for 4 min, n=79), or 20C80N (20% CO2, 80% N2 and <2% O2 for 4 min, n=72). The time to onset of loss of consciousness (LOC) and death was assessed by brain activity (EEG) and behaviour. Behaviour also allowed characterisation of the aversive response to the treatments. Exposure to 40C60N and 20C80N induced LOC faster (19 s [14 – 30 s] and 21 s [16 – 37 s], respectively) but also with less inter-individual variability compared to 40C90C (53 s [26 – 156 s], P < 0.001) and birds took less time to die (40C60N: 64 s [43 – 108 s]; 20C80N: 70 s [45 – 88 s]; 40C90C: 177 s [89 – 212 s], P < 0.001). The 40C90C birds not only experienced more aversion during induction to LOC but are at risk of remaining conscious when the CO2 concentration is increased in the 2nd phase. From an animal welfare point of view, 40C60N provided the highest welfare, followed by 20C80N and 40C90C.

Fiber coupling efficiency is one of the key technical indicators of atmospheric laser communication, which directly affects the communication system BER. According to the optical fiber coupling efficiency model, the optical fiber coupling model under atmospheric slant link is established, and the relationship between wavelength, zenith angle, receiving aperture, altitude and coupling efficiency is studied through numerical simulation. Based on the principle of adaptive optics turbulence correction, the relationship between fiber coupling efficiency and adaptive optics order is established. A fast method for estimating the coupling efficiency based on Strehl ratio is proposed. According to the principle of laser communication system, the semi-physical simulation experimental system of atmospheric slant-range channel coupling efficiency is constructed, and the coupling efficiency test and analysis are completed.

This research examines the fire resistance of geopolymer composites (GCs), formulated using alka-li-activated metakaolin and aluminum powder. The production method involves spray-coating carbon steel plates with fresh GCs, followed by a 28-day curing period at room temperature. Sub-sequently, fire performance and aging tests are conducted to evaluate fire resistance. The study investigates GC properties, including apparent density, bending strength, compression strength, thermal conductivity, porosity, and production cost. Morphological changes before and after fire and aging tests are analyzed using scanning electron microscopy (SEM). Results demonstrate GC foams' outstanding thermal insulation, providing up to 75 minutes of fire resistance with a 6 mm coating, reducing temperatures by 300 °C compared to uncoated steel. GCs exhibit a density of 670 kg/m³, thermal conductivity of 0.166 W/m·K, 68% porosity, and cost efficiency at 250 dollars per cubic meter. This study underscores the potential of foamed geopolymer coatings for effective and economical surface protection.

Increasing evidence supports the direct healing effects of forests, partly attributed to the exposure to plant-emitted monoterpenes available in the forest atmosphere. The potential benefits on respiratory functions from inhaling monoterpenes have gained attention, especially due to the global rise in respiratory diseases. This study involved 42 asthmatic adolescents attending a summer rehabilitation camp at an Altitude Pediatric Asthma Center within a densely forested area in the Eastern Italian Alps. Volatile organic compound measurements indicated a pristine atmosphere, enabling modeling of continuous hourly monoterpenes concentration. Monoterpene concentration exposure and total inhaled dose were assessed over a 14-day stay, during which spirometry, lung oscillometry, and fractional exhaled nitric oxide were measured. Statistically significant correlations were observed between modifications in lung function parameters among asthmatic adolescents and monoterpenes exposure. These findings suggest a potential localized airway effect specific to monoterpenes. This pilot cohort study might pave the way for further investigations into the therapeutic effects of forest monoterpenes on lung function tests, asthma, and the broader healing potential of forest environments.

Tropical forest and savanna biomes are pivotal in the functioning of the Earth system. Tropical forests are one of the largest terrestrial biosphere carbon pools, whereas savannas exchange carbon between the biosphere and atmosphere via frequent and extensive landscape fires. Both are biodiverse and under increasing threat due to land clearing and anthropogenic climate change. Reliable mapping of tropical forest and savanna is essential to provide understanding of how anthropogenic impacts are affecting the extent of these biomes. Using Google Maps satellite imagery, we manually classified 24,239 random points as forest, savanna, or anthropogenic landscapes within the tropics. Because fire and climate are correlated, we developed separate geospatial models to rank the importance of climate, topography, and human influence on vegetation present. This modelling confirmed that those areas with more fires had lower probabilities of tropical forest, that forest was most likely in areas with high mean annual rainfall with little seasonal variation in precipitation, and that anthropogenic factors disrupt this environmental predictability. We found there were environments where tropical forest and savanna were equally probable are geographically restricted. These relationships suggest that future drier climates projected under anthropogenic climate change, combined with clearing and burning that have reduced tropical forest extent to a subset of its theoretical distribution, will lead to irreversible loss of tropical forests. Our modelling provides global mapping that can be used track further changes to distribution of rainforests.

This study investigates the importance of convective systems for extreme rainfall along the northern coast of the Gulf of Guinea (GG) and their relationship with atmospheric and oceanic conditions. Convective system data (MCSs), daily precipitation, sea surface temperature (SST) and moisture flux anomalies are used from June to September 2007-2016. The results show that 2/3 of MCSs crossing Abidjan are produced in June, which is the core of the major rainy season. Likewise, 2/3 of MCSs originate from continental areas, while 1/3 comes from the ocean. Oceanic MCSs are mostly initiated close to the coast, which also corresponds to the Marine Heat Waves region. Continental MCSs are mostly initiated inland. The results also highlight the moisture flux contribution of three zones which have an impact on the onset and the sustaining of MCSs: (i) the seasonal migration of ITCZ, (ii) the GG across the northern coastline, (iii) and finally the continent. These contributions of moisture fluxes coincide with oceanic warming off the Northeast Brazil and the northern coast of the GG both two days before and the day of extreme rainfall events. The ocean contributes to moisten the atmosphere, and therefore to supply and sustain the MCSs during their lifecycle.

Ensuring fire safety is an important condition for the successful operation of industrial enterprises. It is necessary to detect the threat of fire before ignition. An indicator of danger is the appearance of gas, which occurs as a result of unauthorized heating of equipment. Gas sensors make it possible to detect the appearance of gases characteristic of the decomposition of materials at the stage of smouldering and pyrolysis, which cause a change in the composition of the atmosphere. This paper presents a mathematical method for the rational placement of gas analyzers for premises of potentially hazardous industries. It is the rational placement of gas sensors, which ensures safety, taking into account economic feasibility that determines the effectiveness of their use. For the first time, the analysis of gas accumulation during the movement of the flow from the source to the ceil-ing, then propagation to the location of the sensors, is used for the first time to select the placement of gas sensors. Depending on the permissible values of the gas volume, the placement and number of gas sensors are selected. The calculation of the conditions for the rational placement of gas sen-sors for the most common indicators, such as carbon monoxide and hydrogen at different sizes and heights of rooms, is carried out. The method of calculating the location of gas analyzers makes it possible to diagnose and predict fire hazard at technological facilities on the basis of gas control, and compare the obtained values with the maximum permissible values. This method provides cal-culation of the coordinates of the gas source from the coordinates of the triggered sensors. Knowing the coordinates of all sensors, the coordinates of the sensors that gave the alarm, and the formula for determining the volume of the gas cloud under these sensors, it is possible to assess the localization of the source of dangerous gas in the protected room. This increases the efficiency of the fire safety system. The method makes it possible to control the layout of sensors depending on the volume of protected premises, types of production, the creation of new sensors, changes in the composition of hazardous gas in different technological conditions.

Climate and land-use changes have been contributing to increase the occurrence of extreme wild-fires, shifting fire regimes and driving desertification, particularly in Mediterranean-climate regions. However, few studies have researched the effects of land-use change on fire regimes and carbon storage at the broad national scale. To address this gap, we used spatially explicit data from annual burned areas in mainland Portugal to build a typology of fire regimes based on the accumulated burned area and its temporal concentration (Gini index) between 1984 and 2019, which was combined with 2018 carbon stock data (above- and below-ground), and a landscape typology re-sulting from cluster analysis over land-use composition, diversity and configuration, to explore relationships between landscape types and the two major ecosystem services at stake: wildfire reduction and carbon stock. Cross tabulations, logistic and linear regressions were performed on these data and results revealed a strong relationship between landscapes dominated by maritime pine and eucalypt forest plantations and high-hazardous fire regime but hold the highest carbon stock. Shrubland-mixed landscapes were associated with lower carbon stocks but less hazardous fire regimes. Specialized agricultural landscapes, as well as mixed native forests and mixed agro-forestry landscapes, were the least associated with wildfires. In the case of agricultural landscapes however, this good wildfire performance is achieved at the cost of the poorest carbon stock, de-noting land degradation, whereas native forests and agroforestry landscapes strike the best trade-off between carbon stock and fire regime. Our findings support how nature-based solutions promoting wildfire mitigation and carbon stock ecosystem services may prevent and revert land degradation harming Mediterranean regions.

This study focused on demonstrating the potential of classification algorithm in the chemical composition characterization of transiting exoplanets. The Python-based module PLATON 5.3 for forward modelling of transiting planet spectra was used to simulate a set of transmission spectra of an exoplanet with size R_p = 1.40*R_jupiter, and mass M_p = 0.73*M_jupiter orbiting around the host star of size M_s = 1.16*M_sun and surface temperature of 1200 Kelvin. The gas composition of the exoplanet atmosphere was varied at low and high levels of 3-gas mix of CO₂, O₂, N₂ and CH₄ resulting to eight classes of spectra. The transit spectra were then used as input data to a forward neural network classifier with the eight gas composition classes as target outputs. The trained classifier achieved at most 97.9% overall accuracy.

This study has simulated the typical rainstorm on 20 July 2021 over central east China by using the first-generation Chinese Reanalysis datasets and Global Land Data Assimilation System datasets, and the Noah land surface model coupled with the advanced weather research and forecasting model. Based on this, the gridded planetary boundary layer (PBL) profiles and ensemble states within soil perturbations are collected to investigate the main land-atmosphere coupling characteristics during this modeled rainstorm by using various local coupling metrics and the introduced ensemble statistical metrics. Results have shown that (1) except for the stratospheric thermodynamics and surface thermal over mountain areas, the main characteristics of mid-low layers and surface have been well documented in this modeled rainstorm; (2) the typical coupling intensity is characterized by the dominant morning moistening, early noon weak PBL warming around 2, noontime buoyant mixing temperature deficit around 274 K, daytime PBL and surface latent flux contribution around 100 and 280 W/m2 respectively, and significant afternoon soil-surface latent flux coupling; (3) moist static energy is more significant than PBL height during the relation chains, which is consistent with the significance of surface moistening indicated by local coupling metrics. In general, wet soil contributes greatly to daytime moisture evaporation, which then increases the early noon PBL warming and enhances the noontime buoyant mixing within weak flux contribution. However, this has been suppressed by large-scale forcing such as the upper southwestern inflows of rainstorms, which has further significantly shaped the spatial distribution of statistical metrics in contrast. These quantitatively described local couplings have highlighted both the convection potential diagnoses usage for the local weather application and more applicable coupling threshold diagnoses within the finer spatial investigation.

Although the vegetation of the Cerrado biome is prone to fire, plant species composition can be altered according to its severity and frequency. Furthermore, many Cerrado plant species are resistant and can adapt to frequent fires. Little is known about how plant species of Cerrado environments respond to fire and the extent to which fire is beneficial for their conservation. The present study analyzed the responses of plant species of areas of campo sujo to fire and changes in floristics and vegetation structure at different post-fire intervals. Areas with frequent fires had a greater diversity of species, while the area with 10 years without burning had lower diversity and greater DBH. The distribution of species differed among the four the studied areas. We conclude that fire was beneficial for species diversity in the studied areas of Cerrado since it was able to promote the insertion and removal of species during intervals between fires.

This study investigates the frequency dependence of the correlation or anticorrelation of ozone and temperature in the middle atmosphere. The anticorrelation of ozone and temperature plays a role for the expected recovery or superrecovery of upper stratospheric ozone in presence of manmade cooling of the middle atmosphere due to increasing carbon dioxide emissions. The correlation between lower stratospheric ozone and temperature indicates the dependence of lower stratospheric temperature trends on the ozone evolution in addition to greenhouse gas emissions. Ozone and temperature measurements of the microwave limb sounder (MLS) on the satellite Aura from 2004 to 2021 are utilized for Bern (46.95∘N, 7.44∘E) at middle latitudes and for the equator region. The time series are bandpass filtered for periods from 2 days to 5 years. The correlation coefficient depends on the period of the oscillation in temperature and ozone. The strongest correlation and anticorrelation are found for the annual oscillation. The anticorrelation between ozone and temperature in the upper stratosphere is about −0.7 at a period of 2 days and −0.99 at a period of one year. Thus, the temperature dependence of the ozone reaction rates also leads to an anticorrelation of ozone and temperature at short periods so that ozone can be considered as a tracer of planetary waves. At the equator, a dominant semiannual oscillation and an 11 year solar cycle are found for nighttime ozone in the upper mesosphere. The SAO in ozone and temperature show a strong correlation indicating a dynamical control of the ozone SAO in the upper mesosphere. The SAO in the equatorial nighttime values of ozone and temperature is due to a semiannual modulation of vertical advection by the diurnal tide.

Repeated fires cause peatlands to degrade. Fire management has been carried out, but fires continue to occur, especially during the dry season. Through social capital that applies in the community based on the local wisdom of the Banjar people in environmental management, it is hoped that peatland fires can be overcome in this area. This research aims to analyze the social capital of the Banjar people in mitigating land fires based on local wisdom and the environment. The sample in this study was 250 people who live in an area prone to fires on peatlands in Banjarbaru, South Kalimantan, Indonesia. There are three variables in this study, namely Trust (T), Network (N) and Norm (N). There are 33 Likert scale questions (1-4, strongly agree-strongly disagree). We also conducted interviews with 20 members of the Fire Care Community (MPA) to obtain information about the social capital of the Banjar community in mitigating land fires. The analysis used is Structural Equation Modeling (SEM). The study results show norms have the greatest influence on disaster mitigation of peatland fires compared to trust and social networks. Norms in the community in the form of values from peatlands, rules, norms and sanctions regulate the community more to deal with the problem of peatland fires than trust and social networks

We present a new study of Jupiter atmosphere’s dynamics using for the first time the extremely high resolution capabilities of VLT/ESPRESSO to retrieve wind velocities in Jupiter’s troposphere, with a dedicated ground-based Doppler velocimetry method. These results are complemented by a deeper analysis of Cassini data during its flyby of Jupiter in December 2000, performing cloud tracking at visible wavelengths, obtaining a more comprehensive dynamical interpretation. We explore the effectiveness of this new method to measure winds in Jupiter, using high resolution spectroscopy data obtained from ESPRESSO observations performed in July 2019, with a Doppler velocimetry method based on back scattered solar radiation in the visible range. Coupled with our ground based results, we retrieved a latitudinal and longitudinal profile of Jupiter’s winds along select bands of the atmosphere. Comparing the results between cloud tracking methods, based on previous reference observations, and our new Doppler velocimetry approach we found a good agreement between them, demonstrating the eectiveness of this technique. The winds obtained in this exploratory study have a two-fold relevance: they contribute for the temporal and spatial variability study of Jupiter troposphere’s dynamics, and also the results presented here validate this Doppler technique to study the dynamics of Jupiter’s atmosphere and pave the way for further exploration of a broader region of Jupiter’s disk for a more comprehensive retrieval of winds and to evaluate their spatial and temporal variability.

As a follow-up to previously published research, this paper examines the responses of a group (n=185) of professional and volunteer firefighters directly involved in fighting extreme wildfire events of the 2017 summer season in Portugal. The data used in this research stem from two open-ended questions in response to a web-based survey: i) lessons learned and ii) proposals for improving the Civil Protection service. The replies were qualitatively examined. Participants exhibit incomplete awareness of extreme wildfires, and their only answers are i) the improvement of both the current organization and the technical and human resources of the suppression model (question 1), and ii) the increase in human and material resources, the single command, the in-dependence from Civil Protection and the valorization of experience, as the main aspects for the improvement of Civil Protection (question 2). Little attention is given to prevention and to the concept of control capacity, respectively. The answers to both questions showcase scarce knowledge of the paradigm shift in reference to the prevention model. The ratios of missing re-plies to both questions were 32.43% and 47.57%, respectively. The work stands out for its novelty and originality, as to our knowledge there is a total lack of similar works in all European Union literature.

Findings primarily drawn from literature review and interviews with professional resource persons suggest that although the RMG industry of Bangladesh has made substantial progress in correcting structural risks within factory buildings, fire still remains an unresolved issue posing unceasing threat to safety. These findings are significant for all stakeholders within the global supply chain network of Bangladesh, concerned with improving sustainability of the RMG industry and seeking to outline the responsibilities for each group of actors towards preventing building disasters. Both Tazreen Fashion fire incident and the Rana Plaza building collapse served as ‘critical junctures’ in rapid transfer of physical technology to enhance structural safety and streamline production planning within the RMG manufacturing factories within Bangladesh. However, the transfer of social technology within the supply chain network of a developing nation in areas such as development of organisational safety culture or promoting workplace ethics, requires long-term planning and prolonged practices. The paper thus concludes that in developing countries, transfer of physical technology is more readily achievable than the adoption of social technology.

Shrubland and forestland covers are highly prone to fire. The Normalized Difference Vegetation Index (NDVI) has been widely used for biomass quantitative assessment. This study aims were the following: (1) to compute the NDVI annual curve for two types of land cover eucalypts and shrubland areas; (2) to collect field data in these two types of land cover to estimate aboveground biomass (AGB); and (3) to produce AGB maps for eucalypts and shrubland areas by modelling AGB with NDVI and validate them with other data sources. A study area in the central inland Portugal was considered. The Sentinel-2 MSI imagery for the year of 2022 and 2023 were used to compute the NDVI. The NDVI annual curve for 2022 showed a minimum observed between July and August, in accordance with the climatological data, and allowed differentiating eucalypts from shrubland areas. Spectral signatures also confirmed this differentiation. The fitted linear models for AGB prediction using the NDVI imagery showed good fitting performances (R2 of 0.76 and 0.69). The AGB maps provide a relevant decision support tool for forest management and for fire hazard and fire severity mitigation. Further research is needed using more robust data sets for models’ independent validation.

Fire is a common disturbance in the Brazilian savanna (Cerrado), wherein high-frequency fires drive the vegetation structure, composition, function, and dynamics of savanna ecosystems. Under climate change pressure, further understanding of fire-vegetation relationships and interactions can provide new approaches for establishing strategies for integrated fire management and promote savanna vegetation recovery post-fire. To understand how 15 years of yearly manipulated burning affects the vertical and horizontal structure of the vegetation, the species composition and diversity metrics (species richness, Shannon's diversity, and Pielou's evenness), and the aboveground carbon stocks, we surveyed all woody plant species with a diameter greater than three centimeters in 15 plots of a typical Brazilian savanna (cerrado stricto sensu) at an experimental research station in central Brazil (Cerrado biome). Fifteen plots (five per treatment) were differently affected by fire events over a decade, comprising three treatments: (i) annual fire, (ii) legacy fire (> 11 years since the last fire event), and control (not burned in the past 30 years). Non-metric multidimensional scaling (NMDS) analysis indicated a significant effect of fire on the species composition among treatments and that some species benefited from fire, such as Erythroxylum suberosum, whereas others propagated better without fire, such as Camisala montana and Dalbergia miscolobium. Over a decade of annual fire events led to decreases in Shannon's diversity, species richness, and stem density, which were significantly lower in the annual fire treatment than in the control and legacy fire treatments. Stem density by diameter and height size class (except for the 1-2 m class and above 8 m) was higher in the control than in the annual fire treatment, but the number of dead trees did not differ between the control and annual fire treatments. Our results also showed that fire was a factor in changes in the evaluated parameters, such as annual fire treatment, which reduced the amount of biomass and, therefore, the carbon stock. This study suggests that, if burned yearly, typical Brazilian savannas can become less biodiverse in terms of woody plant species and negatively affect their fire resilience. Therefore, fire management practices should focus on determining the frequency with which these ecosystems may benefit the most from fire disturbances.

High-rise building fires pose a serious threat to the lives and property safety of the people. The lack of reliable and accurate positioning means is one of the main difficulties faced by rescue. In the absence of prior knowledge of the high-rise building fire environment, the coverage deployment of mobile base stations is a challenging problem that has not received much attention in the literature. This paper studies the problem of autonomous optimal deployment of base stations in high-rise building fire environment based on UAV group. A novel problem formulation is proposed that solves the non line of sight (NLOS) positioning problem in complex unknown environment. The purpose of this paper is to realize the coverage and deployment of mobile base stations in complex and unknown fire environment. The NLOS positioning problem in the fire field environment is turned into the line of sight (LOS) positioning problem through the optimization algorithm. And there are more than three LOS base stations nearby any point in the fire field. A control law which is formulated in a mathematically precise problem statement is developed that guarantees to meet mobile base stations deployment goal and to avoid collision. Finally, positioning accuracy of our method and that of common method were compared. The simulation result showed that the positioning accuracy of simulated firefighter in the fire field environment was improved greatly.

Fire safety is a critical concern in various industries necessitating the development of sustainable and effective fire-resistant materials. Sustainable fire-resistant polysaccharide-based composite aerogels are regarded as innovative solutions in fire safety applications, and as such, research in this field has increased consistently over the past few years. Despite the plethora of literature on this important subject, only a few studies have attempted to map the global research of sustainable fire-resistant polysaccharide-based composite aerogels to identify the geospatial collaborative network and trend of research. This study utilizes a scientometric review of global trends in sustainable fire-resistant polysaccharide-based composite aerogels research between 2003–2023 by VOSviewer and biblioshiny to analyze co-author, co-word, co-citation, clusters, and geospatial map. A total of 234 bibliographic records from the Scopus database were analyzed to generate the study's research power networks and geospatial map. The most significant contributions in sustainable fire-resistant polysaccharide-based composite aerogels comes from China, the United States, Australia, Canada, and India with records of 194, 20, 11, 9, and 8 respectively. The top five sources for articles in this area of research include ACS Applied Materials and Interfaces, Chemical Engineering Journal, Composite Engineering, ACS Sustainable Chemistry and Engineering, and Carbohydrate Polymers. The application of sustainable fire-resistant polysaccharide-based composite aerogels spans the engineering and construction fields. The versatility in the fabrication and customization allows for seamless integration into diverse applications. The article concludes by emphasizing the significance of sustainable fire-resistant polysaccharide-based composite aerogels as a promising advancement in fire safety technology, combining sustainability, fire resistance, versatility, and mechanical strength to address critical challenges in the field. This study provides readers with an extensive understanding of the salient research themes, trends, and patterns of sustainable fire-resistant polysaccharide-based composite aerogel research worldwide.

Mountain fire can become more complex than fires at lower elevation due to the complex interaction of fire, topography, and weather. The Gell River Fire in Tasmania, Australia occurred in rugged terrain where there are abundant fire sensitive vegetation communities, as well as the presence of infrastructure including high-voltage transmission lines. The fire began at the end of December 2018 and lasted a few months, with a final burnt area of approximately 350km² despite significant fire suppression effort. The fire was investigated by employing wind vector maps, numerical weather model vertical sounding charts (NWMVS) and Prototype 2, which is an integrated fire simulator and can detect lateral fire channeling (LFC). Our analysis of the fire found its spread was likely to be introduced into a valley by forced channeling (FC), which is modified synoptic wind, and showed rapid spread in the valley. The simulated fire also showed wider spread than the observed data in the valley, with the simulated fire impacting highly sensitive vegetation communities on the fringes of the valley. This alludes to some potential conclusions: (1) The loss of fire sensitive vegetation would have increased if fire suppression activity had not been conducted. (2) Spotting fires could be produced by LFC because these spotting fire would allow spreading fire in a shorter period. (3) Heterogeneity of vegetation, such as combination of buttongrass and forest, could help carry fire rapidly in the valley with LFC. Fire can propagate faster in buttongrass than in forests while the forests allow the spotting fire.

In the overall context of national eco-conservation civilization development and considering the hills in the Beijing-Tianjin-Hebei-Shanxi region, the local forest coverage rate is gradually on the rise, and so is the risk of forest fire. Every year, satellites can monitor and detect hundreds of fire spots on average. In recent years, serious fire took place for several times, leading to loss of life and personal injury. Then the fire-fighting work consumed huge amount of labor and material resources, exerting negative social impacts in many ways. Thus, the analysis of fire climate background in this region and the forecast based on fire weather indexes constitute an important part in the forest fire risk management. Located in the tropical monsoon climate zone, four provinces and municipalities of Beijing, Tianjin, Hebei and Shanxi are similar in terms of climate characteristics. This study tries to analyze the characteristics about fire spots under satellite monitoring, fire climate and fire weather index. The probability distribution analysis of weather index about fire spots in history and key meteorological observation stations as well as the weather index analysis in the early stage of typical fire indicate that the Fine Fuel Moisture Content (FFMC) and the Initial Spread Index (ISI) in the Fire Weather Index (FWI) system is applicable to the fire risk analysis in the Beijing-Tianjin-Hebei-Shanxi region, which can also effectively indicate the fuel moisture and spread conditions. As regards to the average level in Beijing-Tianjin-Hebei-Shanxi, when the FFMC is smaller than 93.5 and the ISI is also smaller than 5.0, there is a low risk of fire; when the FFMC is above 94 and the ISI is larger than 10.0, there is a high risk of fire; and the fire risk will be extremely high if the FFMC is over 96 and the ISI is above 13.0. In the practical fire-fighting management, the fire danger class can be released in reference to the ISI classes and threshold values of key meteorological observation stations under analysis provided by this study.

Background: We studied Riveaux Road Fire, which was ignited by multiple lightning strikes in January 2019 and burnt more than 637.19 km² in southern Tasmania, Australia. Aims: We focused on fire weather, such as identification of dynamic wind and vegetation type, in a valley of the study area. Methods: We employed two methods: numerical weather model vertical sounding (NWMVS) and the use of a fire simulator, to quantify and examine the contribution of dynamic winds to fire behaviour. The NWMVSs allow rapid diagnosis of changes in wind, temperature, dew point temperature and cloud coverage. Prototype 2 is a fire simulator based on the specification of Australian Fire Danger Rating System (AFDRS). Key results: We found fires to be guided by terrain-forced channelling primarily and by downslope wind conditionally in the valleys. In addition, the fire intensity periodically changed with the magnitude of surface wind, in buttongrass moorland, in which the fire often smoulders, during the fire period according to the satellite image. Conclusions and Implications: Therefore, there should be caution for not only terrain and dynamic wind but also vegetation type during fire spread in rugged terrain.

Environmental monitoring systems play a crucial role in assessing environmental quality, detecting limits exceedances, and predicting potential ecological episodes. These systems rely on the measurement of various variables at specific locations and time intervals over an extended period. The concept of environmental monitoring encompasses the assessment of health and safety issues for public and environmental health purposes. Pollution of the atmosphere and water, climate change, and natural disasters are among the consequences of continuous industrial and municipal development and human interference in natural ecosystems. To address these challenges and to protect human lives and the environment, with a special concern on mitigating the ecological effects of industrial development, advanced technical solutions, including the technologies associated with artificial intelligence (artificial neural networks ANNs, machine learning ML) have been developed. These technologies offer powerful tools for analysing the vast amount of data collected by monitoring systems and extracting valuable insights. By applying ANNs and machine learning algorithms, environmental monitoring systems can effectively process and interpret the measured variables to assess environmental quality. Despite challenges and limitations, such as data quality and interpretability of AI models, ongoing research and interdisciplinary collaboration are paving the way for the successful implementation of AI in environmental monitoring, ultimately supporting informed decision-making and sustainable resource management.While several review papers have explored the theory of artificial intelligence (AI), here I aim to review the application of ANNs and ML, in environmental aspects, specifically in automotive and industrial emissions toxicity measurements, as well as atmospheric pollution prevention. By examining the potential of AI in these domains, the paper contributes to understanding the role of advanced technologies in environmental monitoring and protection.

CO2 is widely used in the prevention and control of coal spontaneous combustion. In this manuscript, three low-rank coals with different metamorphic degrees were selected as the research objects. The temperature-programmed experiments, in-situ infrared cooling experiments, simulation of competitive adsorption of CO2 and O2 in coal pores, and simulation study of CO2 inhibition of coal oxygen composite reaction were used to obtain the role and effect of CO2 in preventing oxygen adsorption in coal at low-temperature oxidation stage. It is concluded that CO2 can displace the O2 near the pore wall to physically prevent the adsorption of O2. Through the change law of heating rate and kinetic analysis, it is found that CO2 can increase its activation energy by 5.3%-108.3% during the slow heating stage of coal, and reduce its heating rate. At around 120°C, coal loses the protective effect of CO2. From the changes of functional groups, it can be seen that when coal is cooled in CO2 atmosphere, mainly pyrolysis and condensation reactions occur due to the lack of O2. In addition, CO2 can also inhibit the chain reaction of coal's chemical adsorption of oxygen. This work provides a theoretical basis for CO2 prevention and control of coal spontaneous combustion.

Earth Observation (EO) techniques have significantly evolved over time, covering a wide range of applications in different domains. The scope of this study is to review the research conducted on EO in the Eastern Mediterranean, Middle East, and North Africa (EMMENA) region and to identify the main knowledge gaps. We searched through the Web of Science database for papers published between 2018 and 2022 for EO studies in the EMMENA. We categorized the papers in the following thematic areas: Atmosphere, Water, Agriculture, Land, Disaster Risk Reduction (DRR), Cultural Heritage, Energy, Marine Safety and Security (MSS) and Big Earth Data (BED); 6647 papers were found with the highest number of publications in the thematic areas of BED (27%) and Land (22%). Most of the EMMENA countries are surrounded by sea, yet there was a very small number of studies on MSS (0.9% of total number of papers). This study detected a gap in fundamental research in the BED thematic area. Other future needs identified by this study are the limited availability of very high resolution and near real time remote sensing data, the lack of harmonized methodologies and the need for further development of models, algorithms, early warning systems and services.

On 19 September 2021, La Palma volcano (Canarias Archipelagos) started an eruption that persisted until 13 December 2021. Despite the Volcano Explosive Index (VEI) being estimated equal to 3, corresponding to not so powerful eruption, the long eruption activity posed much scientific in-terest in this natural hazard event. In this paper, we searched for possible effects of this eruption on the atmosphere and ionosphere, investigating the climatological archive and Swarm magnetic satellite data. In particular, we explored Aerosol, Sulphur Dioxide and Carbon Monoxide con-centrations in the atmosphere identifying both the direct emissions from the volcano as well as the plume that drifted toward West-South-West and was reinforced during the eruption period. The vertical profile of temperature from the Saber satellite was analysed to search for the possible presence of acoustic gravity waves induced by volcanic activity. Compared with the year before without eruption in the areas, a lot of Saber profiles present an Energy Potential very much higher than the previous year, proposing the presence of Acoustic Gravity Waves (AGW) induced by volcano eruption activity. We also identified Swarm magnetic disturbances on the day of the eruption and in November. The mechanism of coupling could be different for the latter one, as there is no evidence for AGW. They may be due to a more complex of physical and chemical al-terations that propagate from the lower atmosphere to the upper one into the ionosphere.

There is only a very short reaction time for people to find the best way out of a building in a fire outbreak. Software applications can be used to assist the rapid evacuation of victims; however, this is an arduous task, which requires an understanding of advanced technologies. Since well-known pathway algorithms (such as, Dijkstra, Bellman-Ford and A*) can lead to serious problems over performance, we decided to make use of deep reinforcement learning techniques. A wide range of strategies including a random initialization of replay buffer and transfer learning were assessed in three projects involving schools of different sizes. The results showed the proposal was viable and that in most cases the performance of transfer learning was superior. In addition, the study raised challenges that had to be faced in the future.

Forests, integral to human civilization, hold immense value and play a vital role in maintaining ecological harmony. Despite India's goal of extensive forest coverage, significant progress is still needed. Uncontrolled forest fires pose a severe threat, particularly in Uttarakhand's Pauri Garhwal district. To address this challenge, a comprehensive study examined surface and subsurface hydrological factors influencing the forest fire occurrences, such as elevation, aspect, slope, vegetation, proximity to human settlements, proximity to waterbodies, Active faults and lineament density. A total of 15 such factors were integrated with advanced techniques of remote sensing and GIS and coupled with historical fire data to create a precise forest fire risk map using the support vector machine algorithm. Forest fire risk map was classified into 5 distinct risk zones, Very High Risk (47.38 Km2), High Risk (275.98 km2, Moderate Risk (985.49 km2), Low Risk (1741.17 km2) and Very Low Risk (2374.11 km2) aiding in proactive fire management. By embracing this innovative tool, decision-makers can protect forests, preserve biodiversity, and ensure a sustainable future for generations to come.

Commercially available multispectral and thermal imagers are commonly deployed for environmental monitoring on small uncrewed aerial systems (sUAS, <55 lbs). Our team assessed the challenges of deploying these imagers on a Group 3 classification UAS (weight: 55-1320 lbs, maximum altitude: 18,000 ft MSL, maximum speed: 250 kts) for the purpose of land-atmosphere interaction studies. A Micasense Altum multispectral imager was deployed on two very similar mid-sized (Group 3) UAS, a Mississippi State University (MSU) TigerShark XP and the Department of Energy (DOE) ArcticShark. This paper examines the effects of flight on imaging systems mounted on UASs flying at higher altitudes, faster speeds, and for longer duration, which near future technology will make more the norm. For these platforms we found that the acquisition rate may need to be higher to achieve a minimum 75% overlap, as required by certain post-processing algorithms. Additionally pre-flight calibration panel referencing was found to be problematic for converting flight images to reflectance, due to the changing illumination conditions during the extended duration flights. We developed an automated workflow to correct the image frames via data from an onboard hemispherical solar sensor mounted on the top of the airframe, and we assessed these data against known spectral ground targets and independent sources. Finally, this manuscript may be used as a reference for collecting similar datasets in the future. The datasets described within this manuscript may be used as a starting point for future research.

The 2022-2023 Chilean summer showed increased temperatures and similar burned area, compared to the 2016-2017 season, where more than 500,000 hectares were compromised, mainly in the rural areas. After a brief review, it is revealed that the effects of forest fires on soil and hydrological properties are barely debated in Chile. Here, we showed a climatological analysis where temperature records in the 2016-2017 season were unusual, as well as another unexpected increase in the summer of 2022-2023, resulting in high-severity fires known as ‘mega-fires’ or “storm-fires”. Mega-fires affect forest plantations and native forests mainly from 33º S (Maule Region) to 39º S (Los Ríos Region) and they are expected to become frequent due to climate change, moving from the north to the south. We present an overview of the influence of wildfires on soil components in the most affected areas (inland, Coastal, and Andes ranges), their hydrological impacts, and potential erosion risk due to high winter precipitation. We propose several management practices that could help to prevent or mitigate these events, including pre-and post-fire interventions, such as afforestation and seeding, selective logging, mulching, erosion barriers, soil preparation, and dam monitoring. We argue that any effective plan in fire-prone and affected areas should include a combination of actions taken at the hillslope scale at integral ecosystem management, whose effectiveness should be monitored and verified regionally at the watershed scale.

Crop residue burning produces a lot of polluting gases and fine particles, endangering human health, damaging soil structure, and causing fire accidents. In addition to the impact of residue burning on the local environment, pollutants can spread with the wind to more distant areas and impact the air quality of surrounding areas, especially cities. Nevertheless, a comparative analysis of the impact of two common residue burning parameters, the number of residue fire points and residue burned area, on urban air quality indicators has not been reported. In this study, the correlation between these two different residue burning parameters on air quality in Daqing City was investigated comparatively using the Visible Infrared Imaging Radiometer Suite (VIIRS) fire point product, the Moderate-resolution Imaging Spectroradiometer (MODIS) burned area product, and buffer zone analysis. The association between MODIS burned area products and air quality index (AQI) was found to be around 0.8, with a maximum of 0.816 at a buffer zone radius of 50 km. Meanwhile, it was found that the correlation between the number of residue fire points extracted from the VIIRS active fire products and air quality was above 0.6, again with a maximum of 0.745 at a buffer radius of 50 km. Within other levels of buffer zones, the correlation between residue burned area and AQI was consistently higher than that between residue fire points and AQI. By comparing the correlation between VIIRS fire points, MODIS burned area, and AQI with the concentration of each pollutant, we found that the correlation between residue burned area and AQI and the concentration of each pollutant is higher. MODIS burned area monitoring, on the other hand, detects changes in the time series of images taken by satellite at two transit moments to obtain the new burned area and cumulative burned area during this period, allowing the monitoring of fire traces caused by fire points at non-transit moments. From analyzing the correlation between residue fire points, residue burned area, and the concentration of each pollutant (PM2.5, PM10, CO, NO2, SO2, O3), we found significant correlations between residue burning and PM2.5, PM10, CO, and NO2 concentrations, with the highest correlation (R2) of 0.81 for PM2.5. Moreover, the correlation between residue burned area and PM2.5, PM10, CO, and NO2 concentrations was significantly higher than that between the number of residue fire points and their concentrations.

Global warming is increasing the frequency and intensity of compound drought-heat events (CDHEs), potentially leading to larger and more extreme fire seasons in mesic forests. Wildfire activity in subtropical China, under the influence of monsoonal rainfall, was historically limited to dry winters and rare in rainy summers. Here we seek to test that this area is on the brink of a major change in its fire regime characterized by larger fire seasons, extending into the summer, leading to increases in burned area. We analyze fire activity in Chongqing Municipality (46,890 km2), an important area in subtropical China hosting the Three Gorges Reservoir Area. We observed significant increases in summer forest fires under anomalous dry-hot summer conditions, where total burned area was 3-6 higher than the historical annual mean (largely confined to the winter season). Vapor pressure deficit, an indicator of hot and dry conditions, was a strong predictor of fire activity, with major wildfires occurring on days where VPD was higher than 3.5kPa. Results indicate that major wildfire activity may occur in the area as a result of climate change, unless strong fire prevention policies are implemented.

Air pollution and the increasing production of greenhouse gases has prompted greater use of renewable energy sources; the EU has set the use of green energy at 32 percent by 2030. With this in mind, in the last 10 years the demand for pellets in Italy has more than doubled making Italy the second largest consumer in Europe. The quality of the pellets burned in stoves is crucial to indoor and outdoor pollution. Among other parameters, moisture and ash are used to classify pellets according to EN ISO 17225:2014. This work involved the analysis of the organic and inorganic fraction of both some finished products on the Italian market and some raw materials (e.g., wood chips) sampled according to the technical standard EN 14778:2011. The analytical results showed the presence of some substances potentially harmful to human health such as formaldehyde, acetone, toluene and styrene for the organic fraction and nickel, lead and vanadium for the inorganic fraction. The chemometric approach showed that it is the inorganic fraction which is most responsible for the diversification of the samples under study. The detection of some substances may be a warning bell about the impact of such materials both for the environment and for the human health.

The Victorian Government Inquiry into wildfires that killed 173 people in 2009 has driven an Australian policy shift from self-evacuation or staying and defending a well-prepared property (‘go or stay’) to self-evacuation under catastrophic fire weather (‘leave early’). The Inquiry also led to the establishment of national ‘performance standards’ for Private Fire Shelters (PFS, that also known as bunkers). Nonetheless, incorporation of PFS into national bushfire policy remains embryonic with only Victoria having streamlined accreditation and planning approval processes. Arguments against PFS include potentially engendering complacency about preparing dwellings to survive fire and encourage risky behavior in response to a fire threat. Counteracting these arguments is research that shows that residents without PFS have low engagement with bushfire preparation and typically delay evacuation. In any case, because wildfire is unpredictable it is accepted that self-evacuation plans must have fallback positions that include sheltering ‘in place’ from the bushfire, making properly used and well maintained PFS an important element of bushfire safety. A less discussed barrier to PFS uptake outside Victoria appears to hinge on a lack of clarity about obligations for their design, certification, and consistency with planning approvals. The escalating Australian fire crisis demands much greater research and development in legal frameworks, policy and planning processes for PFS, as well as design and construction standards.

This study probes the probabilistic features of major fire hazards in enclosed spaces to establish their importance to the occurrence of fires onboard ro-ro passenger ships and in turn to raise effective operational countermeasures. Distinct from the previous studies, the present research employs Bayesian Network (BN) analysis to determine the probabilities of fire hazards more effectively. The findings of the research include five critical basic events (BE) identified namely, vehicle engine fire (fuel system fault), vehicle electric fire (electrical equipment defect or short circuit), used car electrical fire, reefer units electrical fire (electrical appliances defects or short circuit), and cargo spontaneous combustion. Additionally, the risk of fire for lithium - ion battery powered vehicles is also highlighted in the process of BN analysis, which prompts the authors to propose preventive measures for mitigating the possibility of fire occurrence on this type of electric vehicles. It is hoped that these measures can be essential justifications for establishing relevant rules regarding carrying LIB vehicles in enclosed spaces on international level.

This work analyzes a new indoor laboratory data set looking at early fire indicators in controlled and realistic experiments representing different incipient fire scenarios. The experiments were performed within the confines of an indoor laboratory setting using multiple distributed sensor nodes on different room positions. Each sensor node collected data of particulate matter (PM), volatile organic compounds (VOC), CO, CO2, H2, UV, air temperature and humidity in terms of a multivariate time series. These data hold immense value for researchers within the machine learning and data science communities who are keen on exploring innovative advanced statistical and machine learning techniques. They serve as a valuable resource for the development of early fire detection systems. The analysis of the collected data was carried out in dependence of the manhattan distance between the fire source and the sensor node. We found that especially larger particles (&gt; 0.5 μm) and VOCs show a significant dependency with respect to the intensity as a function of the manhattan distance to the source. Moreover, we observed differences in the propagation behavior of VOCs, PM, and CO, which are particularly relevant in incipient fire scenarios due to the presence of strand popagation effects.

As in many parts of the world, rural-urban, forest-urban interface areas surrounding urban regions expose the natural areas they interact with to a threat of fire risk that can reach various sizes. This risk has been assessed for various regions of the world using many different methods and numerical models so far. Among these, it is seen that machine learning models have successful applications in risk assessment and risk prediction studies. For the fire risk prediction of Istanbul's yet unurbanized regions, but where the city is anticipated to potentially shift, data was collected using the opportunities provided by Geographic Information Systems and Remote Sensing technologies based on fires that occurred between 2000-2021, and the region was examined. Machine learning methods' Random Forest (RF), Extreme Gradient Boosting (XGB), and Light Gradient Boosting (LGB) models were applied for the classification of factors effective in fire. The best result was given by the RF model with 0.93 accuracy, 0.062 F1 score, and 0.753 Area Under Curve (AUC) value. In the classification of factors in the RF model, the grouping between fire-initiating factors and factors effective in spreading is evident, while this distinction is partially noticeable in the other two models.

Fires pose a significant threat to human life and property. An autonomous fire detection and fighting robot has the potential to mitigate the challenges associated with firefighting. This paper presents the implementation of an autonomous fire detection and fighting robot equipped with sensors, algorithms, and actuators to detect, locate, and suppress fires autonomously. The robot's mechanical and electrical components were designed, prototyped, and tested in a controlled environment to evaluate its ability to navigate through obstacles, detect fires, and suppress them autonomously. The results show that the robot effectively detects and suppresses fires, making it a promising solution for firefighting applications. The study contributes to the development of autonomous robots for firefighting, enhancing the safety of firefighters and the effectiveness of firefighting operations.

In the framework of the FireStorm project, four portable weather stations were installed in the Lousã/Estrela mountain range. Given that the Portuguese Institute for Sea and Atmosphere’s sur-face network has two weather stations installed in this region, the new data allows an improved monitoring of the vertical variability of near-surface variables in this mountainous region. As most of the wildfires in mainland Portugal affect areas with complex terrain with elevations below 1200 m and major fires continue to burn overnight, it is also relevant to monitor the vertical changes of meteorological variables in the nighttime period, as these may exhibit large variability. This study provides the first assessment of the available data, with focus on the summer seasons of 2021 and 2022. The results highlight the large variability that was observed in the region and suggest that the risk of extreme fire behaviour in the nighttime period may be underestimated.

Fires are the leading cause of death, serious injury and property damage. In the past, schools, temples and government offices had more frequent fires than they should. Statistics showed that the number of fires between 2017 to 2022 amounted 13,593 cases which mostly occurred in the school, temple and government offices (40.0% of all buildings). Moreover, it causes more damage among disabled especially the blinds who has a limited vision. Therefore, this cross-sectional purpose of this study was to assess fire risk including management model in school for the blind. The fire checklists, brainstorming and Analytic Hierarchy Process (AHP) were applied to estimate the fire risk in school for the blind building. The findings revealed an inherent fire hazard factors with a risk score equal to 3.2830 and evacuation factors with a risk score equal to 3.3178 were acceptable risk except the fire control factors with a risk score equal to 1.4320 was unacceptable risk may cause an impact on life, health, property and public communities. Eventually, efforts should be made to supervise those risk factors by designing suitable activities to reduce undesirable conditions in school for the blind.

In this study, we focus on the effects of fuel bed representation and fire heat and smoke distribution in a coupled fire-atmosphere simulation platform for two landscape-scale fires: the 2018 Camp Fire and the 2021 Caldor Fire. The fuel bed representation in the coupled fire-atmosphere simulation platform WRF-Fire currently includes only surface fuels. Thus, we enhance the model by adding canopy fuel characteristics and heat release, for which a method to calculate the heat generated from canopy fuel consumption is developed and implemented in WRF-Fire. Furthermore, the current WRF-Fire heat and smoke distribution in the atmosphere is replaced with a heat-conserving Truncated Gaussian (TG) function and its effects are evaluated. The simulated fire perimeters of case studies are validated against semi-continuous, high-resolution fire perimeters derived from NEXRAD radar observations. Furthermore, simulated plumes of the two fire cases are compared to NEXRAD radar reflectivity observations followed by buoyancy analysis using simulated temperature and vertical velocity fields. The results show that while the improved fuel bed and the TG heat release scheme have small effects on the simulated fire perimeters of the wind-driven Camp Fire, they affect the propagation direction of the plume-driven Caldor Fire, leading to better-matching fire perimeters with the observations. However, the improved fuel bed representation together with the TG heat smoke release scheme leads to more realistic plume structure in comparison to the observations in both fires. The buoyancy analysis also depicts more realistic fire-induced temperature anomalies and atmospheric circulation when the fuel bed is improved.

Earth’s near space is a region between 20 and 100 km above sea level, which is characterized by low temperature, low atmospheric pressure, harsh radiation, and extreme dryness. These conditions are analogous to the surface of Mars and the atmosphere of Venus, and thus make it a unique natural lab for astrobiologists. To address the important astrobiological questions of the effects of the near space environmental conditions on biology and of the survival strategies of representative organisms in this planetary analog, teams from the Chinese Academy of Sciences have developed a scientific balloon platform named the Chinese Academy of Sciences Balloon-Borne Astrobiology Platform (CAS-BAP) and carried out a series of experiments in lower near space since 2019. Here, we describe the Biological Samples Exposure Payload (BIOSEP) loaded on CAS-BAP with respect to its structure and function. The primary role of BIOSEP is to expose biological/chemical samples to the planetary analog environments of Earth’s lower near space. Exposed samples will be returned to laboratories for morphological, physiological, chemical, and genetic analyses. The development of BIOSEP and associated biological exposure experiments will improve our understanding of the livelihood of potential Mars lives and the potential habitability of the atmosphere regions of other planets in the Solar System and beyond.

Using lightweight fire-rated board (LFRB) presents cost-effective opportunities for various passive fire protection measures. The aim of the project is to develop a LFRB with enhanced fire resistance, acoustic properties, and mechanical properties. These properties were determined using the Bunsen burner, furnace, energy dispersive X-Ray, impedance tube instrument, and Instron universal testing machine. To fabricate the LFRBs, vermiculite and perlite were blended with flame-retardant bind-ers, and four types of LFRBs were produced. A fire test was conducted to compare the fire-resistance performance of the LFRBs with a commercially available flame retardant board. The B2 prototype showed exceptional fire-resistant properties, with a temperature reduction of up to 73.0 °C as compared to the commercially available fire-rated magnesium board. Incorporating nano chicken eggshell into the specially formulated flame-retardant binder preserved the LFRBs’ structural integrity, enabling them to withstand fire for up to 120 minutes with an equilibrium temperature of 92.6 °C. This approach also provided an absorption coefficient of α = 2.0, a high flexural strength of 3.54 MPa, and effective flame retardancy properties with a low oxygen/carbon ratio of 2.60. These results make the LFRBs valuable for passive fire protection applications in the construction and building materials industry.

Forest fires are one of the world's deadliest natural disasters. Early detection of forest fires can help minimize the damage to ecosystems and forest life. In this paper, we propose an improved fire detection method YOLOv5-IFFDM for YOLOv5. Firstly, the fire and smoke detection accuracy and the network perception accuracy of small targets are improved by adding attention mechanism in the backbone network. Secondly, the loss function is improved and the SoftPool pyramid pooling structure is used to improve the regression accuracy and detection effect of the model and the robustness of the model. In addition, random Mosaic augmentation technique is used to enhance the data to increase the generalization ability of the model, and re-clustering of flame and smoke detection a priori frames are used to improve the accuracy and speed. Finally, the parameters of the convolutional and normalization layers of the trained model are homogeneously merged to further reduce the model responsibility to improve the detection speed. Experimental results on homemade forest fire and smoke datasets show that this algorithm has high detection accuracy and fast detection speed, with average accuracy of fire up to 90.5% and smoke up to 84.3%, and detection speed up to 75 FPS (frames per second transmission), which can meet the requirements of real-time and efficient fire detection.

The dependence of longleaf pine (Pinus palustris) ecosystems on fire is well-understood, and anthropogenic alteration of fire cycles within its natural range has contributed to its decline. This is increasingly exacerbated in areas of urban interfaces, wherein use of prescribed fire can be problematic. The purpose of this study—the University of West Florida Campus Ecosystem Study—was to examine effects of fire exclusion on longleaf pine in the unique urban interface of a university campus. This was conceived as an interconnected series of investigations on the main campus and three associated natural areas that comprise remnant longleaf stands following cessation of widespread longleaf pine harvesting ~120 years ago. This period of chronic fire exclusion has allowed for a distinct shift in stand structure and composition. The open, savanna-like structure of fire-maintained longleaf stands has transitioned into closed-canopy forests with the increased prevalence of southern evergreen oaks (especially live oak—Quercus virginiana) and Magnolia spp., resulting in complete absence of longleaf regeneration. Fire exclusion has also appeared to have decreased soil fertility. Significant variation in mean age of longleaf pine stems of the main campus and natural areas suggest that the natural areas were likely under separate ownership with contrasting land-use history prior to purchase by the State of Florida for campus construction in 1963.

Fire regimes in mountain landscapes of southern Europe have been shifting from their baselines due to rural abandonment and fire exclusion policies. Understanding the effects of fire on biodiversity is paramount to implement adequate management. Herein, we evaluated the relative role of burn severity and heterogeneity on bird abundance in an abandoned mountain range located in the biogeographic transition between the Eurosiberian and Mediterranean region (the Natural Park ‘Baixa Limia–Serra do Xurés’). We surveyed the bird community in 206 census plots distributed across the Natural Park, both inside and outside areas affected by wildfires over the last 11 years (from 2010 to 2020). We used satellite images of Sentinel 2 and Landsat missions to quantify the burn severity and heterogeneity of each fire within each surveyed plot. We also accounted for the past land use (forestry or agropastoral use) by using a land cover information for year 2010 derived from satellite image classification. We recorded 1,735 contacts from 28 bird species. Our models, fitted by using GLMs with Poisson error distribution (pseudo-R²_-average of 0.22 ± 0.13), showed that up to 71% of the modelled species were linearly correlated with at least one attribute of the fire regime. The spatiotemporal variation in burnt area and severity were relevant factors for explaining the local abundance of our target species (39% of the species; Akaike weights > 0.75). We also found a quadratic effect of at least one fire regime attribute on bird abundance for 60% of the modeled species. The past land use, and its legacy after 10 years, was critical to understand the role of fire (Akaike weights > 0.75). Our findings confirm the importance of incorporating remotely sensed indicators of burn severity into the toolkit of decision makers to accurately anticipate the response of birds to fire management.

The influence of small-scale processes at the ocean-atmosphere boundary layer such as spray and foam on the surface waves prediction is studied. Estimates of the effect of including the exact number of specific fragmentation "parachute" type in the spray on the resulting drag coefficient is shown. For the estimates, the numerical simulations within WAVEWATCH III wave model are performed. The parameterizations of wind input were tested within WAVEWATCH III wave model: default ST4 and ST6 parameterizations and the ST1 and ST6 parameterizations used together with the implemented drag coefficient parameterization. The proposed parameterization takes into account the presence of foam and spay. The obtained results are compared with the NDBC buoys data. The importance of small-scale processes for waves at hurricane winds prediction and the prospects for their inclusion in modern numerical wave models is shown.

Micro-nano-plastics (MNPs) are an important constituent of atmospheric aerosol. However, there is still no standard procedure for their sampling and size fractionation, which is an obstacle to the aggregation and critical analysis of results obtained by different research groups. This review focuses on the sampling and fractionation methodologies used for MNPs. Moreover, a straightforward optimized methodology for the sampling and fractionation is proposed.

Building fires are preventable incidents that have proven to be both deadly and costly. Addressing their root causes will lead to safer neighbourhoods for families and businesses to live and operate in. Multiple studies have established the effect of residents’ socioeconomic compositions on an area’s building fire rates; however, the existing model based on the classical stepwise regression procedure has several limitations. This paper aims to construct a more accurate predictive model of building fire rates based on a set of explanatory socioeconomic variables. In building the socioeconomic model, a backward elimination by Robust Final Predictor Error (RFPE) criterion is proposed to enhance the forecasting capability of the model. The proposed method has been implemented on the census data and the fire incident data of the South East Queensland region in Australia. A cross-validation was then conducted to assess the model’s accuracy. In addition, comparative analyses of other elimination criteria, such as p-value, adjusted R-squared, Akaike’s Information Criterion (AIC), Bayesian Information Criterion (BIC) and predicted residual error sum of squared (PRESS), were conducted. The cross-validation analyses demonstrate that the proposed criterion is a more accurate predictive model based on a couple of goodness-of-fit measures. All in all, the RFPE equation was found to be a suitable criterion for the backward elimination procedure in the socioeconomic modelling of building fires.

In this paper, we present a multimodal dataset for the analysis of classroom atmosphere, based on the behavior and voice of teachers in teaching scenarios. we propose four visual models, three audio models, and one visual-audio dual-modality model to be tested on our dataset. The results indicate that the CH-CC dataset is feasible and reliable and that the visual modality plays a major role in the analysis of this dataset.

The purpose of this paper is to develop an index system for measuring the compliance of high-rise residential buildings with fire requirements and also to develop an index system for measuring the fire response efficiency, which is linked to the index of compliance with fire requirements. The higher the compliance rate, the greater the chance of a successful response. The two systems de-pend on the automation of the firefighting system management processes using the techniques of the fourth industrial revolution and developed based on the consultation of subject matter experts in the field. The main elements of the indexes were identified, which were based mainly on several variables, including the fire administrative system, the firefighting system, the residents, the loca-tion of the high-rise residential buildings from the fire extinguishing station, and the height of the high-rise residential building. The two systems can contribute to improving emergency prepared-ness in high-rise residential buildings in the Emirate of Sharjah and are also considered as a measurement index for compliance with fire requirements in the Emirate of Sharjah.

Erwinia amylovora, the causative agent of fire blight, leads to important economic losses of apple and pear crops worldwide. This study aimed to investigate the potential of the resident bacterial flora of the apple blossom in combatting plant disease-causing organisms, with a focus on strains that show potential for controlling fire blight. We collected samples of apple blossoms from dif-ferent sites around Canton Zurich, some grown with and some without the use of conventional pesticides, and isolated 538 strains which we tested for activity against Pectobacterium carotovorum and E. amylovora. We also tested the isolates against oomycete and fungal pathogens, to evaluate them for additional potential as biocontrol agents. Nine isolates showed activity against P. ca-rotovorum and eight of these against E. amylovora. Furthermore, 117 showed antifungal and 161 anti-oomycete activity. Five strains showed activity against all classes of pathogen and were tested in a detached apple model for anti-E. amylovora activity. Of these five strains, two were able to antagonise E. amylovora; Bacillus velezensis #124 and Pantoea agglomerans #378. We also show that B. velezensis #124 exhibits strong activity against three different fungi and two oomycetes in vitro, suggesting that this strain might have broad potential for biocontrol. Our results showcase the potential of the natural apple blossom flora. We isolated two candidate biocontrol strains from apple blossoms, suggesting that they can persist at the most common entry point for the causative agent of fire blight. Furthermore, they are probably already part of the human diet, suggesting they are safe for consumption and thus are promising candidates for biocontrol applications.

A neglected dimension of the fire regime concept is fire patchiness. Habitat mosaics that emerge from the grain of burned and unburned patches (pyrodiversity) are critical for the persistence of a diverse range of plant and animal species. This issue is of particular importance in frequently burned tropical Eucalyptus savannas, where coarse fire mosaics have been hypothesized to have caused the recent drastic population declines of small mammals. Satellites routinely used for fire mapping in these systems are unable to accurately map fine-grained fire mosaics, frustrating our ability to determine whether declines in biodiversity are associated with local pyrodiversity. To advance this problem, we have developed a novel method (we call ‘double-differenced dNBR’) that combines the infrequent (c. bi-monthly) detailed spatial resolution Landsat with daily coarse scale coverage of MODIS and VIIRS to map pyrodiversity in the savannas of Kakadu National Park. We used seasonal Landsat mosaics and differenced Normalized Burn Ratio (dNBR) to define burned areas, with a modification to dNBR that subtracts long-term average dNBR to increase contrast. Our results show this approach is effective in mapping fine-scale fire mosaics in the homogenous lowland savannas, although inappropriate for nearby heterogenous landscapes. Comparison of this methods to other fire metrics (e.g., area burned, seasonality) based on Landsat and MODIS imagery suggest this method is likely accurate and better at quantifying fine-scale patchiness of fire, albeit it demands detailed field validation.

Project managers should balance a variety of resource elements in building projects while taking into account many major concerns, including time, cost, quality, risk, and the environment. This study presents a framework for resource trade-offs in project scheduling based on the Building Information Modeling (BIM) methodology and metaheuristic algorithms. First, a new metaheuristic algorithm called Fire Hawk Optimizer (FHO) is used. Using project management software and the BIM process, a 3D model of the construction is created. In order to maximize quality while minimizing time, cost, risk, and CO2 in the project under consideration, an optimization problem is created, and the FHO's capability for solving it is assessed. A predefined stopping condition is taken into account while doing 30 independent optimization runs to obtain the statistical metrics, such as the mean, standard deviation, and the required number of objective function evaluations. The results show that the FHO algorithm is capable of producing competitive and exceptional outcomes when it comes to trade-off various resource options in projects.

The optical signals detected on multiple satellite platforms over snow surfaces are determined by the optical properties of snow surface and atmosphere. The solution of both direct and inverse problems of an atmosphere – underlying snow system requires simple relationships between top-of-atmosphere (TOA) reflectance R and microphysical/optical characteristics of both snow and atmosphere. The task of this paper is to present a simple analytical relationship between the value of R as detected on a satellite with atmosphere/snow properties. Such a relationship can be established using a numerical solution of integro - differential radiative transfer equation (RTE) (Liou, 2022). However, this path is quite complicated and time consuming. The analytical solutions of RTE are needed for the solution of various applied atmospheric and snow optics problems (Cachorro et al., 2022; Mei et al., 2020, 2022; Kokhanovsky, 2021). This is the main driver of this work. To simplify the problem under study we consider the case of Antarctica, where both snow and atmosphere are almost free of pollutants. This work is focused on the simulation of the moderate spectral resolution TOA measurements (1nm or so) and the spectral range 400-1000nm.

Background: In long-term care facilities, there are many residents who do not have the ability to seek shelter by themselves in the case of an emergency. Thus, it is extremely important that the staff of nursing homes are equipped with correct disaster prevention concepts, emergency survival responses, and hazard mitigation measures. Purpose: Discuss the intervention effectiveness of different fire prevention and emergency response trainings at nursing homes and the relationship and predictivity of awareness to self-efficacy. Method: Recruit staff from two nursing homes through purposive sampling, using a two-team pre-and post-test design to collect results from 41 individuals in the experiment group and 40 individuals in the control group. The research tool is the “Nursing Home Fire Prevention and Emergency Response Awareness and Self-Efficacy Scale,” to compare the effectiveness of advanced and general fire safety trainings. Result: After receiving improved advanced fire safety training, the total score and the result of the experiment group on fire prevention and emergency response awareness and self-efficacy had both performed better than the control group who received general fire safety training (p < .001); fire prevention and emergency response awareness has significant and positive correlation with self-efficacy (r=.601, p < .001), and awareness is a significant predictor variable to self-efficacy (p < .001). Conclusion/Practical Application: This study finds that the key to improving learning effectiveness includes adding fire science concept chapter when creating fire safety training material in order to strengthen basic awareness; fire safety training should comprehensively introduce all related duty responsibilities of staff fire defense formation, in turn enabling mutual responsive support for the needs of the site; also, to become familiarized with the knowledge requires appropriate frequency of training and enhancing the staff’s awareness to fire prevention and emergency response, which is the most important key of learning effectiveness.

This article presents results of the polarization laser studies of the optical and microphysical characteristics of the high-level clouds (HLC). The high-altitude matrix polarization lidar (HAMPL; Tomsk, Russia) is described. HAMPL measures vertical profiles of all elements of the backscattering phase matrix (BSPM) of the HLC. Based on the joint analysis of lidar and radiosonde observations it is shown that the spatial structure of the HLC containing oriented ice crystals is inhomogeneous in the horizontal wind direction. It includes local areas with oriented particles; the sizes of such areas are estimated together with the most probable meteorological conditions of their formation. The shortcomings of the radiosonde observations performed closest to the location of the HAMPL are described. The applicability of the ERA5 reanalysis data of the European Centre for Medium-Range Weather Forecasts for use as an alternative source of information on the vertical profiles of meteorological quantities for the interpretation of HLC lidar sensing data in Western Siberia was checked.