Orchids are among the plants most threatened by anthropic impact and environmental changes. Therefore, all known orchid species are protected in several countries by regional, national and international legislation. Several studies cast doubts on the effectiveness of legislation to ensure protection of wild orchids. We assessed the vitality of four orchid populations in a coastal area in Northern Italy, by monitoring vegetative and reproductive traits of orchid populations growing both in protected sites comprised in the Natura 2000 network and in non-protected sites. We also monitored the level of environmental threat to orchid vitality. Early flowering deceptive species (Ophrys sphegodes and Anacamptis morio) exhibited high vegetative vitality and experienced similar levels of environmental threat in protected and non-protected areas. However, their reproductive success was strongly jeopardized probably by failed pollination that impeded fruit set. Late-flowering, partially or totally rewarding species (Anacamptis pyramidalis and Anacamptis coriophora) were more strongly impacted by spring mowing, ungulate herbivory and alien species. Only for A. coriophora were herbivory and alien species invasion lower at protected vs. non-protected sites which ensured higher population vitality at protected sites. We conclude that environmental protection is ineffective for preserving orchids without targeted actions against specific environmental threats.

Ecological stoichiometry is an important index to reflect ecological interaction and the balance of various elements in ecological processes. At present, the stoichiometric spatial distribution of soil carbon (C), nitrogen (N), phosphorus (P) and potassium (K) in farmland and grassland of Inner Mongolia and its influencing factors are still unclear. In this study, the spatial distribution of soil nutrient content and stoichiometry and the effects of environmental factors on soil C:N:P:K stoichiometry were analyzed under different land use patterns in four agro-pastoral areas. The results showed that there was a geographical gradient in the ecological stoichiometric relationship between farmland and grassland. RCN, RCP, RCK, RNP and RNK showed an "N" distribution from west to east, while RPK showed a "V" distribution. The difference in spatial distribution was more significant than the difference in land use pattern. The ecological stoichiometric relationship of grassland was mainly affected by the content of C and N, and was related to the similarity of soil properties. The field ecological stoichiometry was mainly affected by the content of nitrogen and phosphorus, and had a great relationship with fertilization. The effects of MAT and MAP on soil ecological stoichiometry were related to the inter-regional environmental heterogeneity. The influence of MAP on farmland and MAT on grassland was more significant. It was of great significance for field management according to local conditions, rational utilization of land resources and sustainable development of agriculture to clarify the ecological stoichiometric characteristics of farmland and grassland in agro-pastoral ecotone.

This research review paper comprehensively assesses the environmental impacts of diverse energy sources and proposes sustainable solutions. Fossil fuels contribute to pollution, habitat destruction, and greenhouse gas emissions. Renewable energy offers cleaner alternatives but faces challenges in manufacturing and disposal. Nuclear power has low emissions but poses risks in waste management and radiation. Biomass can be sustainable if responsibly sourced, but unsustainable practices lead to deforestation and emissions. Solutions include renewable technologies, energy efficiency, carbon capture, and sustainable transportation. Effective policies, incentives, and individual actions are crucial for a greener future. This review highlights the urgency of addressing energy-related environmental impacts and offers valuable insights for policymakers and individuals to take decisive actions for a sustainable energy future that protects the environment and promotes well- being.

This study conducts a comprehensive analysis of the presence of heavy metals, including zinc (Zn), lead (Pb), copper (Cu), chromium (Cr), and arsenic (As), in the dust found inside educational buildings and the top layer of soil in different areas of Vilnius. The study focuses on the analysis of topsoil samples gathered between 2011 and 2023, with a specific emphasis on dust samples obtained from 24 schools in 2022. The research reveals significant variations in the concentrations of heavy metals, providing a clear understanding of the complex relationship between sources of urban pollution, environmental processes, and the correlation between soil and dust contamination by heavy metals. Indoor dust in schools shows unique contamination patterns in contrast to topsoil, suggesting distinctive sources of indoor pollution, while there are some general similarities. This finding emphasizes similarities and distinctions between soil and dust in educational environments. The study utilizes advanced statistical methods such as Pearson correlation, Principal Component Analysis (PCA), and hierarchical clustering to examine the distribution and characteristics of these metals. This study distinguishes itself by examining indoor dust in educational facilities and topsoil in Vilnius, providing crucial insights into the relationship between these two environmental matrices.

The study aimed to investigate the effect of climate change exposure on affect and pro-environmental behavioural intentions in a randomised controlled trial. An online survey was completed by 100 adult participants and included measures of affect and pro-environmental behavioural intentions pre- and post-exposure. Participants were randomly allocated to a group that saw a climate change video (n=55) or a group that saw a non-climate change video (n=45). The findings showed were that participants in the climate change group showed a significant increase in negative affect and pro-environmental behavioural intention scores post-video exposure compared to the non-climate change video group. This suggests that climate change video exposure negatively influences affect but also potentially increases the intention to act pro-environmentally. These findings have the potential to support policies and societal change, however further investigation into the type of contents, actual behaviour change, and impacts on diverse populations (e.g., minority groups) is needed that influences pro-environmental behaviours is required. Furthermore, to achieve a greater impact, future research should be conducted measuring actual pro-environmental behaviour change, including with those from diverse populations.

There are four categories of medical waste that cannot be mixed as this will cause serious problems such as environmental pollution or infection. In the past, the classification of medical waste often involved a lot of human and material resources to process, with workers at risk of exposure to infectious substances. Therefore, an augmented reality (AR) and artificial intelligence (AI) medical waste classification system and method were developed. This innovative medical waste classification system and method combines AR and AI identification technology to reduce the risk of manual judgment errors by clinical staff when handling medical waste.

In recent years, change in behaviour towards the environment has gained prominence as a policy tool to influence positive environmental value. Simultaneously, the role played by social identity in promoting pro-environmental action is gaining recognition. Within this work, the intersection between collective group identity and environmental behaviour has received very little attention. Group norms are considered a strong predictor of pro-environmental behaviour, yet the influence of social identity and collective action on environmental action has not been adequately investigated in a multi-ethnic setting. Within this context, this study examines the affective component of social identity influence on pro-environmental action. More succinctly, this study demonstrates how outgroups and in-groups’ relations and broader socio-cultural structures, values, interest, and norms impact environmental and sustainability transitions behaviours. Through interviews with participants across the four dominant social groups in South Africa, this study provides compelling evidence that country wide expressions of social identity and in-group dynamics shapes the individual behaviour regarding environmental and sustainability concerns and further strengthen the individual’s perspective for social environmental transformation. This study advances the need for a social-identity centred approach to foster pro-environmental and sustainability outcomes.

The brick manufacturing sector in Bangladesh is experiencing rapid growth, leading to notable environmental and health concerns. The primary objective of this research is to examine the Savar Upazila, a region of significant economic significance owing to its favorable brick manufacturing conditions and proximity to Dhaka city. Brick kilns, among other sources, constitute significant contributors to air pollution. The study utilized primary and secondary data to examine brick kiln emissions' effects on the surrounding area's environment and public health. The collection of primary data was conducted in multiple zones within Savar Upazila, which is home to a significant number of brick kilns. The utilization of secondary data provided valuable insights regarding the toxic pollutants discharged by these kilns and the corresponding health risks they pose. The participants provided accounts of various health ailments, such as dermatological conditions, optical difficulty, and respiratory complications, further aggravated by brick kilns' incidents. The prevalence of crop losses, soil degradation, and reduced agricultural yields was confirmed by 74% of the respondents. The trees and crops in the surrounding area experienced adverse effects due to the deposition of dust particles. During periods of inactivity, the concentrations of sulfur oxide (SOx) were between 6 and 9 times lower compared to periods of operation. Similarly, nitrogen oxide (NOx) levels were observed to be 4 to 6 times lower during non-operational phases. The degradation of water quality in adjacent bodies has been attributed to the deposition of dust and ash originating from brickfields, resulting in substantial repercussions on aquaculture. A significant proportion of participants indicated experiencing diverse health issues, notwithstanding the employment prospects generated by brick kilns, thereby underscoring the adverse consequences on both the environment and the local economy.

The measures related to climate change and international technology transfer have been closely intervened as most international environmental instruments, including the United Nations Framework Convention on Climate Change and Kyoto Protocol as well as Paris Agreement which contain the provisions concerning environmentally friendly technology transfer. However, technologies have not been transferred adequately owing to the flaws in the relevant provisions and due to the fact that most technologies are possessed by transnational corporations and other private sectors. In order to undertake the commitment by the governments of developed countries and at the same time, to conform the commercial activities of their respective private sectors to the level of promised international obligation, an uniform international technology transfer agreement needs to be established separately, particularly under the World Trade Organization regime in Post Pairs-Agreement era. This paper first explores the defects and challenges found in provisions related to technology transfer in existing environmental agreements, and examines the possibilities of concluding an international technology transfer agreement both from theoretical and practical perspectives. climate change;environmentally sound technology;international technology transfer;Post Paris-Agreement Era

Commercial development of tidal stream energy is hampered by technical and financial challenges, and impeded by uncertainty about potential environmental effects that drive environmental risk assessments and permitting (consenting) processes. The effect of greatest concern for operational tidal stream energy devices is the potential for marine animals to collide with turbine blades, resulting in injury or death. Due to the turbulent and often turbid waters that frequently characterize tidal turbine sites, there is an absence of empirical evidence about collisions with marine animals. This paucity of observations often leads to risk-averse permitting decisions that further restrict the deployment of tidal energy devices that are needed to collect this evidence. This paper relies on the framework of stressors and receptors that is used widely in marine energy studies and outlines a stepwise probabilistic methodology that applies existing knowledge to further elucidate the risk to marine animals from operational tidal turbines. A case study using striped bass from the Bay of Fundy, Canada, accompanies the methodology, to partially demonstrate its application.

Powder metallurgy is a preferred manufacturing method in various industries because it offers design flexibility, material efficiency and a cost-effective production. In this work, we study the effects of different compaction directions on the strength of parts produced by powder metallurgy. Al–4wt.%Cu alloys are used due to their recyclability, and three distinctive compaction pressures are applied, resulting in two sample groups. One group is air-cooled after sintering, while the other is water-quenched and naturally aged (T4 temper). Both the compressive and tensile strengths are measured and analyzed. The study reveals that both heat treatments and compaction directions significantly influence anisotropic strengths. The novelty of this research lies in the use of powders that can be reused from machining, turning, or foundry rejection. By omitting or reducing the melting stage and employing simple powder metallurgy, the cost-effective and environmentally friendly processes are achieved. The planning of compaction load, compaction direction, and heat treatments is found to play a crucial role in determining the final mechanical performance. Notably, this approach aligns with the environmental, social and governance (ESG) practices that have been increasingly adopted by industry.

Interior designers play a pivotal role in shaping the built environment and catalyzing positive change through the adoption of sustainable design practices. This study centers on the analysis of prevailing attitudes held by interior designers in Jordan towards sustainable interior design practices. Through a comprehensive methodology involving a literature review and a three-part questionnaire, the research explores the benefits, challenges, and integration of sustainability principles. The study highlights substantial awareness (85%) of sustainable interior design's environmental impact and resource preservation. Additionally, 81% acknowledge its enduring significance, and 89% recognize its diverse benefits. While 61% exhibit familiarity, 27% claim professional experience. Among sustainability indicators, energy efficiency scores 4.25, resource efficiency 4.27, and "Design aligns with laws and regulations by the Ministry of Labor" ranks highest at 4.37. This study significantly augments our understanding of sustainable interior design by introducing a comprehensive evaluation framework that encompasses the three sustainability dimensions. It equips decision-makers with a robust tool to identify specific practices that bolster sustainability performance, further advancing the field.

The use of bioethanol in cooking is not new, but until recently its application has been confined exclusively to small scale projects. However, a new bioethanol cooking utility in Kenya has now reached mass market adoption, serving more than 950,000 households with cooking fuel since launching in late 2019. Its success was made possible by a significant investment in technology to facilitate safe, convenient and affordable fuel distribution. It is funded by climate finance which is based on bioethanol fuel replacing charcoal used for cooking, a leading cause of African defor-estation. This development has been so recent that it has not widely been discussed in the academic literature. More broadly, the health, environmental and economic impacts of bioethanol for cooking have not been systematically assembled in one place. This article details what is known about the impact of bioethanol for cooking, how and why bioethanol for cooking was able to suddenly reach commercially viable scale in spite of the challenges it faced. It also discusses implications for further scaling of clean cooking fuel solutions.

Chronic heat stress (CHS) has been exerting great pressure on the poultry industry due to the global warming. CHS-induced negative impacts deeply change the physiology, metabolism, egg production and meat quality of ducks. To reduce the increasing economic loss, different environmental strategies have been adopted. Here, we comprehensively compared three rearing modes for Cherry-Valley ducks (CVds) mainly by changing the environmental temperature. Plus, the transcriptome analysis and physiological anatomy were implied to investigate the underlying molecular biology and pneumonocyte dynamics. It turns out that the CVds affected by CHS have poor growth performance and bad carcass traits. In addition, the irreversible damage caused by CHS in the lung tissue of CVds was observed. Furthermore, several potential genes related to CHS have been found, such as HSPA8, IGF1, FGFR1, ACSL3, ACSL6, NR1H3 and GAPDH. This study strongly indicates the severe injury of CHS from the high-temperature environment and points out one of the adopting directions for duck rearing.

Sustainable supply chains have become increasingly crucial to address environmental and social challenges faced by societies worldwide. Last-mile delivery, which involves delivering products from a distribution center or warehouse to the final destination, typically a consumer's doorstep, is an essential component of the supply chain. However, it faces numerous challenges such as traffic congestion, air and noise pollution, and carbon emissions. This research paper explores the viability of last-mile delivery solutions for sustainable supply chains. The study reviews the literature on last-mile delivery challenges, sustainable last-mile delivery solutions, and case studies of sustainable last-mile delivery solutions. The results indicate that innovative last-mile delivery solutions, such as electric vehicles, cargo bikes, and drones, have the potential to reduce environmental impact and improve the efficiency of last-mile delivery while enhancing social equity. Additionally, partnerships between different stakeholders, including governments, logistics companies, and consumers, can contribute to the development of sustainable last-mile delivery solutions. The study concludes that sustainable last-mile delivery solutions are essential to achieving sustainable supply chains and recommends further research to explore the economic feasibility and scalability of these solutions.

Extreme heat is a climate, public health, and environmental justice issue. This case study examined public transit exposure and vulnerability to extreme heat by investigating the microenvironment, land cover characteristics, and social vulnerability of heat-vulnerable bus stops in Knoxville, Tennessee. The community’s temperature and Heat Index information, bus stop point data, land cover characteristics data, and the microenvironment of bus stops (i.e., trees and shelters) were processed and mapped with ArcGIS Pro. The pictures of the microenvironment of the bus stop were collected from Google Maps, and the social vulnerability of the area where the bus stops are located was investigated by analyzing the Center for Disease and Prevention's Social Vulnerability Index. Results found that the most heat-vulnerable bus stops were concentrated in West Knoxville, South, North, Northeast, and Northwest Knoxville. In addition, the most heat-vulnerable bus stops were concentrated in commercial complexes and areas a large number of systematically marginalized populations reside.

Children five years or younger in low- and middle-income countries (LMICs) are severely affected by diarrhoea disease, especially in the sub-Saharan region. Hence, the study aimed at determining the prevalence and determinants of diarrhea disease among children under 5 years in Epworth Township, Zimbabwe. A descriptive cross-sectional study was conducted at a local clinic in Epworth Township, Harare. A convenience sampling strategy was used to recruit study participants for participation and 386 children were enrolled in the study. The majority were male children (n=229; 59.3%), while there were more female caregivers (n=370; 95.9%) than male caregivers (n=16; 4.1%). The prevalence of diarrhea disease in the study was 25.1%. The determinants associated with diarrhea were being partially vaccinated (OR 2.38, CI 95% 2.80–8.22), collecting water more than 1 kilometre from a household (OR 4.55; CI 95% 2.10–9.85) and using untreated water (OR 6.22; CI 95% 2.13–18.20). The age of the caregiver and using a clean water container (OR 0.05; p=0.020) were protective factors. Provision of primary health care, especially prevention of disease through immunization and rendering environmental health services could reduce the prevalence of diarrhea in disadvantaged townships.

Transdermal drug delivery (TDD) is one of the key approaches for treating diseases, avoiding first-pass effects, reducing systemic adverse drug reactions and improving patient compliance. Microneedling, iontophoresis, electroporation, laser ablation and ultrasound facilitation are often used to improve the efficiency of TDD. Among them, microneedling is a relatively simple and efficient means of drug delivery. Microneedles usually consist of micron-sized needles (50-900 μm in length) in arrays that can successfully penetrate the stratum corneum and deliver drugs in a minimally invasive manner below the stratum corneum without touching the blood vessels and nerves in the dermis, improving patient compliance. Hydrogel-forming microneedles (HFMNs) are safe, non-toxic, no residual matrix material, high drug loading capacity, controlled drug release and are suitable for long-term, multiple drug delivery. This work reviewed the characteristics of skin structure and transdermal drug delivery; introduced TDD strategies based on hydrogel microneedles; summarised the characteristics of HFMNs TDD systems and the evaluation methods of HFMNs; and the application of HFMNs drug delivery systems in disease treatment. The HFMNs drug delivery system has a wide scope for development, but the translation to clinical application still has more challenges.

Environmental regulation has dual effects on water resource utilization performance through various channels such as the "three red lines" and the "Porter hypothesis". Based on the detailed analysis of the impact path of environmental regulation on water resource utilization performance, the two-step system GMM method was adopted to test the dual effects of environmental regulation on water resource utilization performance by using panel data of 30 provinces and cities from 2004 to 2020. The results show that: (1) Environmental regulation has a significant direct impact on water resource utilization performance, and is currently in the stage of positive relationship of an inverted u-shaped relationship. (2) Environmental regulation has a significant indirect impact on water resource utilization Environmental regulation has dual effects on water resource utilization performance through various channels such as the "three-red lines" and the "Porter hypothesis". In accordance with a detailed examination of the influence path of environmental regulation on the performance of water resource utilization, the double effects of environmental regulation on water resource utilization performance were examined using panel statistics from 30 provinces and cities from 2004 to 2020 using the two-step system GMM approach. The results demonstrate that: (1) Environmental regulation has a direct effect on water resource utilization performance which is currently in the stage of the positive relationship of an inverted u-shaped relationship. (2) The influence of environmental regulation on water resource utilization performance through government intervention and industrial structure adjustment is indirect, among which government intervention can significantly improve water resource utilization performance, while the growth of the tertiary industry as a percentage can lower water resource utilization performance. (3) Both direct and indirect impacts indicate that enhancing the efficiency of the use of water resources is sustainable, and the water resource utilization performance of the preceding period had a major positive impact over the present phase. Therefore, the paper sets out a few policy suggestions, such as choosing reasonable environmental regulation tools, actively guiding the market-oriented reform with constraints, and upgrading the industrial structure in a green way.

Groundwater plays a crucial role in triggering and reactivating deep-seated landslides. However, classical hydrogeological investigations have limitations in their applicability to deep-seated landslides due to anisotropic and heterogeneous media[16]. The Huangtupo landslide in the Three Gorges reservoir area has garnered significant attention in China due to its large volume, complex geological structure, and high hazard potential. Recent monitoring data has shown notable deformation in the NO.1 Riverside Sliding Mass (HTP-1), one of the four parts of the Huangtupo landslide, making it the primary focus of landslide research. This study aimed to investigate the water sources in the HTP-1 landslide using environmental stable isotopes as tracers. The isotopic analysis results indicated that the groundwater in the landslide area (LGW) is a mixture of remote karst groundwater (KGW) from the adjacent up-slope and local precipitation (LP). The karst groundwater is a major contributor to the recharge of the landslide groundwater system, causing a high slope groundwater level that can easily exceed the critical level during heavy rainfall events. Furthermore, based on the differential distribution of the LP fraction of LGW at different locations, the groundwater in the landslide can be classified into three groups. Groundwater at the sliding rupture surface has the highest fractions of local precipitation, followed by the groundwater at the rear of the landslide. Combined with the monitoring data of groundwater level in boreholes during the rainy season, this indicates that fissures and fractures in the sliding rupture zone and at the back of the landslide are well connected, which could be a critical factor in the mass movement of the creeping slope.

“Sustainable development” (SD) is a term that has gained prominence in the international dia-logue around development. Many, however, continue to misunderstand the concept, its principles, its development, and its operationalization. The wide variety of definitions and interpretations of SD lean toward institutional and social prerogatives rather than unifying the essence of the con-cept, which is rooted in conventional ideas and values. By delving deeper into the paradigm, its history, and its potential, this research sought to contribute to ongoing discussions about sus-tainable development. The literature was thoroughly analyzed using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) 2020. This historical and conceptual analysis sought to update the body of knowledge on sustainability and sustainable development by examining the metaphorical and epistemological underpinnings of SD’s various definitions, evolutions, and principles. The research concludes and argues that intergenerational justice, based on the environment, economy, and society, is the central tenet of the entire sustainable develop-ment argument. The focus and consideration of interested parties are moving from the protection of the environment to social sustainability. The future of SD is likely to continue to focus much more on the social pillar and integrate digitalization in implementing the SD concept, especially in the fourth industrial revolution. To promote ethical human behavior and activities worldwide, at national and local levels, decision-makers must be continuously cognizant of the interdepend-encies, direct interactions, and balance between the three core constructs of SD.

Background: Multidrug-resistant bacteria present resistance mechanisms against β-lactam antibiotics, such as Extended-Spectrum Beta-lactamases (ESBL) and Metallo-β-lactamases enzymes (MBLs) operon encoded in Gram-negative species. Likewise, Gram-positive bacteria have evolved other mechanisms through mec genes, which encode modified penicillin-binding proteins (PBP2). This study aimed to determine the presence and spread of β-lactam antibiotic resistance genes and the microbiome circulating in Quito’s Public Transport (QTP). Methods: A total of 29 station turnstiles were swabbed to extract the surface environmental DNA. PCRs were performed to detect the presence of 13 antibiotic resistance genes and to identify 16S rDNA barcoding, followed by clone analysis, Sanger sequencing and BLAST search. Results: ESBL genes blaTEM-1 and blaCTX-M-1 and MBL genes blaOXA-181 and mecA were detected along QPT stations. Two subvariants were found for blaTEM-1, blaCTX-M-1, and blaOXA-181. Almost half of the circulating bacteria found at QPT stations were common human microbiota species including those classified by the WHO as pathogens of critical and high-priority surveillance. Conclusions: β-lactam antibiotic resistance genes are widely spread throughout QPT. This is the first report of blaOXA-181 in environmental samples in Ecuador. Moreover, we detected a new putative variant of this gene. Some commensal coagulase-negative bacteria may have a role as mecA resistance reservoirs

The current COVID19 pandemic has raised huge concerns for outdoor air quality due to expected lungs deterioration. These concerns include the challenges in the scalable prediction of harmful gases like carbon dioxide, iterative/repetitive inhaling due to mask and environmental temperature harshness. Even in the presence of air quality sensing devices, these challenges lead to failed planning and strategy against respiratory diseases, epidemics, and pandemics in severe cases. In this work, a dual time-series with bi-cluster sensor data-stream-based novel optimized regression algorithm was proposed with optimization predictors and optimization responses that use automated iterative optimization of the model based on the similarity coefficient index. The algorithm was implemented over SeReNoV2 sensor nodes data, i.e. multi-variate dual time-series of environmental and US Environmental Protection Agency standard sensor variables for air quality index measured from air quality sensors with geospatial profiling. The SeReNoV2 systems were placed at four locations that were 3 km apart to monitor air quality and their data was collected at Ubidots IoT platform over GSM. Results have shown that the proposed technique achieved a root mean square error (RMSE) of 1.0042 with a training time of 469.28 seconds for normal and RMSE of 1.646 in the training time of 28.53 seconds for optimization. The estimated R-Squared error of 0.03 with Mean-Square Error for temperature 1.0084 ᵒC and 293.98 ppm for CO2 was observed. Furthermore, the Mean-Absolute Error (MAE) for temperature 0.66226 ᵒC and 10.252 ppm for CO2 at a prediction speed of ~5100 observations/second for temperature 45000 observations/second for CO2 due to iterative optimization of the training time 469.28 seconds for temperature and 28.53 seconds for CO2 was very promising in forecasting COVID19 countermeasures before time.

Phosphorus (P) is the most important substance in inorganic fertilizers used in agriculture industry. In this study, a multi-product and multi-objective model is presented considering economic and environmental concerns to design a renewable and sustainable P-fertilizer supply chain management (PFSCM). To handle complexities of the proposed model, an ensemble knowledge-based three-stage heuristic-metaheuristic algorithm utilizing heuristic information available in the model, whale optimization algorithm, and variable neighborhood search (named H-WOA-VNS) is proposed. At first, a problem-dependent heuristic is designed to generate a set of near-optimal feasible solutions. These solutions are fed into a population-based whale optimization algorithm which benefits from both exploration and exploitation strategies. Finally, a single-solution metaheuristic based on variable neighborhood search is applied to further improve the quality of the solution using local search operators. The objective function of the algorithm is formulated as a weighted average function to minimize total economic cost, while increasing crop yield and P use efficiency. Experimental results over five synthetic datasets and a real case study of the P-fertilizer supply chain confirm the superiority of the proposed method against the state-of-the-art techniques. The results demonstrate that the proposed method performs well in optimizing both the economic cost and environmental issues.

A crop-weed simulation model is presented to compare and evaluate Integrated Weed Management (IWM) strategies. Specifically, the model was parameterized for soybean crops in competition with Euphorbia davidii Subils. We used both, weed and crop demographic data surveyed in agronomic fields of the central zone of the Buenos Aires province, Argentina, throughout two crop cycles (2011/2012 and 2013/2014). The proposed model underwent a calibration process and subsequent validation with 70/30 % data split respectively (N=37). Two annual-based and one multiannual-based case studies were simulated to demonstrate the performance of the model. Different IWM strategies were compared under both, operational and tactical planning horizons through the evaluation of different model outcomes (i.e. crop yield, interspecific competition, economic return, and environmental impact). Our case studies results suggest that the inclusion of cultural management practices could reduce weed interspecific competition by 46 to 97 % and weed seed production by 40 to 89%. An increment in both expected crop yield, by 6 to 20%, and annual gross margin, by 44 to 199 US$.ha-1, were obtained in silico for similar levels of environmental impact.

The establishment of thresholds is integral to environmental management. This paper introduces the use of thresholds in the context of deep-seabed mining, a nascent industry for which an exploitation regime of regulations, standards and guidelines is still in the process of being developed, and for which the roles and values of thresholds have yet to be finalised. There are several options for integrating thresholds into the International Seabed Authority’s regulatory regime, from being stipulated in regulations to being part of a mining contract, each option having its own advantages and disadvantages. Here we explore the range of ways that thresholds can be derived, set out the challenges in translating ecological and management data into thresholds, highlight factors for acceptance and operationalisation of thresholds in deep-seabed mining, and explain the necessity of refining thresholds as knowledge on impacts to features improves. Some comparable marine industries already use thresholds and these could potentially be used as starting points for the development of thresholds for deep-seabed mining. In order to be acceptable to the wide range of deep-seabed mining stakeholders, thresholds need to strike a balance among levels of harm acceptable by society, levels of environmental precaution justifiable by governments, scientific robustness, and operational practicality.

Glass fibers slowly dissolve and age when exposed to water molecules. Such a phenomenon also occurs when glass fibers are inside fiber-reinforced composites protected by the matrix. This en-vironmental aging results in the deterioration of the mechanical properties of the composite. In structural applications, GFRPs are continuously exposed to water environments for decades (typically design lifetime is around 25 years or even more). During their lifetime, these materials are affected by various temperatures, pH acidity levels, mechanical loads, and the synergy of these factors. The rate of the degradation process depends on the nature of glass, sizing, fiber orientation, and environmental factors such as acidity, temperature, and mechanical stress. In this work, degradation of typical industrial grade R-glass fibers, when inside an epoxy fiber-reinforced composite, is studied experimentally and computationally. A Dissolving Cylinder Zero-Order Kinetic (DCZOK) model was applied and could describe the long-term dissolution of glass composites, considering the influence of fiber orientation (hoop vs transverse), pH (1.7, 4.0, 5.7, 7.0, and 10.0), and temperature (20, 40, 60, and 80 °C). The limitations of the DCZOK model and effects of sizing protection, accumulation of degradation products inside the composite, and water availability were discussed. Experimentally dissolution was measured using ICP-MS. Like for the fibers, for GFRPs also, the temperature showed an Arrhenius-type influence on the ki-netics, increasing the rate of dissolution exponentially with increasing temperature. Similar to fibers, GFRPs showed a hyperbolic dependence on pH. The model was able to capture all of these effects, and the limitations were addressed.

Background: In Switzerland, Aedes albopictus is well established in Ticino, south of the Alps, where surveillance and control are implemented. The mosquito has also been observed in Swiss cities north of the Alps. Decision-making tools are urgently needed by the local authorities in order to optimize surveillance and control. Methods: A regularized logistic regression was used to link the long-term dataset of Ae. albopictus occurrence in Ticino with socio-environmental predictors. The probability of establishment of Ae. albopictus was extrapolated to Switzerland and more finely to the cities of Basel and Zurich. Results: The model performed well, with an AUC of 0.86. Ten so-cio-environmental predictors were selected as informative, including the road-based distance in minutes of travel by car from the nearest cell established in the previous year. The risk maps showed high suitability for Ae. albopictus establishment in the Central Plateau, the area of Basel and the lower Rhone Valley in the Canton of Valais. Conclusions: The areas identified as suitable for Ae. albopictus establishment are consistent with the actual current findings of tiger mosquito. Our approach provides a useful tool to prompt authorities’ intervention in the areas where there is higher risk of introduction and establishment of Ae. albopictus.

Waste recovery is an important aspect towards human and environmental health protection. Unfortunately, proper food waste management is among the serious challenges in the field of solid waste management worldwide. Therefore, it is of great importance to conduct studies towards achieving efficient and cost-effective approaches for food waste management. This study investigated the potential of recovering food waste through maggots’ production as animal feed. The influence of fly attractant application on maggot production was also investigated. The study also investigated the potential of maggot production for waste recovery and reduction. Four different types of food waste (starch food leftovers, rotten bananas and peels, rotten pineapple and peels, and rotten oranges) were used in the investigation process. From the results, it was observed that the application of fly attractants had a significant effect on the production of maggots as determined by the weights after harvesting. Average weight of 94 g/kg of maggot was achieved from banana materials with an application of fly attractant during the 8th day of the cultivation; which is equivalent to a 32.4% increase from the same day when the material was cultured without applying fly attractant. Also, from the starch materials, about 77 g/kg of maggot weight was achieved; which is a 54.6% increase from the same day and the same material but without application of fly attractant. Moreover, the relative dry weight reduction in the trials varied from 52.5% to 82.4%.

Lead-210 from natural atmospheric fallout is widely used in multidisciplinary studies to date recent sediments. Some of the ²¹⁰Pb-based dating models can produce historical records of sediment accumulation rates (SAR) and initial activity concentrations ( ). The former have been profusely used to track past changes in the sedimentary conditions. Both physical magnitudes are differently affected by model errors (those arising for the partial or null accomplishment of some model assumptions). This work is aimed at assessing the effects on SAR and of model errors in the CRS, CS, PLUM and TERESA dating models, due to random variability in ²¹⁰Pb fluxes, which is a usual sedimentary condition. Synthetic cores are used as virtual laboratories for this goal. Independently of the model choice, SARs are largely affected by model errors, resulting in some large and spurious deviations from the true values. This questions their general use for tracking past environmental changes. are less sensitive to model errors and their trends of change with time may reflect real changes in sedimentary conditions, as it is shown with some real cores from varved sediments.

Social Economy institutions seek to provide answers to social problems, given that they naturally have a socially responsible mission. This study aims to answer the research question: how sustainable practices, namely environmental behaviour, have been adopted by Portuguese Private Social Solidarity Institutions (IPSS) with the purpose of contributing to Sustainable Development? To achieve this objective, qualitative research was carried out in 31 IPSS, which was framed within the scope of the TFA project (Theoretical framework for promotion of accountability in the social economy sector: the IPSS case). Semi-structured interviews were conducted, with a script based on the literature review, from May to July 2019, with those responsible for the management of these entities. A content analysis was conducted, using the NVivo12 Version 12.6.0 software, which enables data to be coded and categorised, reducing any researcher bias. The results indicate that most entities carry out activities of an environmental nature, related to the reuse of materials, the recycling of waste, the sale of materials for recycling, and user awareness. Several entities expressed financial limitations to the implementation of Environmental Management Systems and their accomplishment. However, the objections presented are not impossible to overcome, according to studies presented in other countries.

The decline in Pinus sylvestris var. mongolica in the introduction area has had a high profile in recent years. For the ecological restoration, management and silvicultural design of Mongolian pines in the introduction area, it is necessary to conduct a comprehensive and in-depth study on the ecological adaptation mechanism of Mongolian pines in provenances. The ecological process of water and nutrient accumulation as well as the influence of environmental factors on the photosynthetic physiology are the key to revealing the ecological adaptation mechanism of Mongolian pines. According to the differences of climate in the distribution area of Mongolian pines, sampling sites were set up, the effects of environmental factors on leaf δ13C and the relationship between leaf δ13C and nutrient content were analyzed. The results showed that leaf δ13C values were ranging from - 29.7 ‰ to - 23.76 ‰. The ecological stoichiometry, including LC (522.81 mg·g-1), LN (16.04 mg·g-1), LP (1.19 mg·g-1) and L-N:P (13.56), indicated that leaf photosynthesis and water use efficiency is greatly affected by environmental conditions, Mongolian pines had strong ability of carbon fixation, and its growth was obviously restricted by nitrogen. Although there was no significant correlation between δ13C with stoichiometric parameters in leaf, photosynthesis was the key link in the process of carbon fixation. It also showed that Pinus sylvestris var. mongolica was a stomatal limited plant. Leaf δ13C had significant correlation with climatic factors. VPD is the dynamic factor affecting the photosynthetic physiological process in leaves. Air and soil moisture are the dominate factors affecting the leaf stomatal conductance and determines leaf δ13C value, while other factors indirectly affect leaf δ13C by its impact on relative humidity or soil water content. Soil phosphorus content affected by clay is a key factor affecting soil water availability and soil nutrient cycling. Photosynthetic process in leaf is the dynamic process affecting the nutrient accumulation.

Coral reefs are critical ecosystems globally for marine fauna, biodiversity and through the services they provide to humanity. However, they are significantly threatened by anthropogenic stressors, such as climate change. By combining 9 environmental variables and ecological and health-based thresholds obtained from the available literature, we develop, using fuzzy logic (discontinuous functions), a Coral Reef Stress Exposure Index (CRSEI) for remotely monitoring coral reef exposure to environmental stressors. Our approach capitalises on the abundance of readily available satellite Earth Observation (EO) data available in the Google Earth Engine (GEE) cloud-based geospatial processing platform. CRSEI values from 3157 distinct reefs were generated and mapped across 12 important coral reef ecosystem regions. Quantitative analyses indicated that the index detected significant temporal differences in stress and was, therefore, able to capture historic change at a global scale. We also applied the CRSEI to three case-study reef ecosystems, previously well-monitored for stress and disturbance using other methods. PCA analysis indicated that depth, current, sea surface temperature (SST) and SST anomaly accounted for the greatest contribution to the variance in stress in these three regions. The CRSEI corroborated temporal and spatial differences in stress exposure from known disturbances within these reference regions, in addition to identifying the potential drivers of inter- and intra-region differences in stress, namely depth, degree heating weeks and SST anomaly. We discuss how the index can be further improved in future with site-specific thresholds for each stress variable, and the incorporation of additional variables not currently available in GEE. This index provides an open access tool, built around a free and powerful processing platform, that has broad potential to assist in the regular monitoring of our increasingly imperilled coral reef ecosystems, and, in particular, those that are remote or inaccessible.

The primary purpose of this article is to present a maturity model dealing with environmental manufacturing processes in a company. First, a theoretical approach is presented where evolution from the first industrial revolution to the present (Industry 4.0.) is outlined with a need to implement environmental initiatives. Chapter two contains a detailed literature review, which resulted in the creation of our own maturity model presented in the next chapter. According to some authors, Industry 4.0 is based on characteristics that have already been the focus of “lean and green” concepts. The practical part of the article is a case study that shows which areas of the manufacturing process have “environmental” potential. The goal was to move from resource consumption, pollutant emissions and more extensive manufacturing towards environmentally responsible manufacturing (ERM). Using environmental materials and methods reduces energy consumption, which generates cost savings and higher profits. Here, VSM (Value Stream Mapping) was applied to identify core processes with environmental potential. The final part of the article summarizes the work and presents future possibilities. This paper provides an understanding of the role of environmental manufacturing in the era of the 4th industrial revolution.

This article analyses the environmental impact of the measures imposed during the SARS-CoV-2 pandemic. We compare the evolution of atmospheric pollution levels in recent years and during lockdown, and assess the effects of the decrease in mobility and changes in patterns and lifestyles during the latter period. Thus, the reduction in the risk to human health brought about by the improvement of air quality during the months of confinement through the use of dose-response functions is estimated. The focus of the case study is the island of Tenerife. The island of Tenerife has been selected because it can serve as an example for other sites in Europe. We distinguish between the three areas with the highest population concentrations: the Metropolitan, Southern, and Northern areas. The impacts of air pollution and its relationship with changes in consumption and activity patterns are clearly distinguishable. Therefore, the lessons learned can be easily extrapolated to other areas, in both island and mainland contexts.

Organic-organic interactions play important roles in the secondary organic aerosol formation, but the interactions are complex and poorly understood. Here we use environmental molecular beam experiments combined with molecular dynamics simulations to investigate the interactions between methanol and nopinone, as atmospheric organic proxies. In the experiments, methanol monomers and clusters are sent to collide with three types of surfaces, i.e., graphite, thin nopinone coating on graphite and multilayer surfaces, at temperatures between 140 K and 230 K. Methanol monomers are efficiently scattered from the graphite surface, whereas the scattering is substantially suppressed from nopinone surfaces. The desorption from the three surfaces is similar, suggesting that all the surfaces have weak or similar influences on the methanol desorption. The molecular dynamics results show that upon collisions the methanol clusters shatter, and the shattered fragments quickly diffuse and recombine to clusters. The desorption involves a series of processes, including detaching from clusters and desorbing as monomers. The experimental results also show that all trapped methanol molecules completely desorb within a short experimental time scale at temperatures of 180 K and above. At lower temperatures, the desorption rate decreases, and a long experimental time scale is used to resolve the desorption, where three desorption components are identified. The fast component is beyond the experimental detection limit. The intermediate component exhibits multi-step desorption character and has an activation energy of E_a = 0.18 ± 0.03 eV, in good agreement with simulation results. The slow desorption component is related to diffusion processes due to the weak temperature dependence.

Temperature is one of the most important range-limiting factors for many seaweeds. Driven by the recent climatic changes, rapid northward shifts of species’ distribution ranges can potentially modify the phylogeographic signature of Last Glacial Maximum such as increased genetic diversity at lower latitudes. To explore this question in detail in the kelp Saccharina latissima, we used microsatellites and double digest RAD-sequencing derived SNPs on S. latissima sporophytes sampled within 11 sites spanning the entire European Atlantic latitudinal range of this species. In addition, we checked for statistical correlation between genetic marker allele frequencies and three environmental proxies (sea surface temperature, salinity, and water turbidity). Our findings revealed that genetic diversity was significantly higher for the northern localities compared to the southern ones in contrast to the expected phylogeographic pattern. This suggests that the southernmost S. latissima populations are negatively affected by the recent climatic changes but also that the recolonization of S. latissima range following the LGM may have occurred from northerly refugia. Seven SNPs and 12 microsatellite alleles were found to be significantly associated with at least one of the three environmental variables. We discuss the potential adaptive functions of the genes associated with the outlier markers and the importance of these markers for successful conservation and aquaculture strategies for S. latissima in this age of rapid global change.

Experiences of homelessness, although widely varied, are characterized by extensive time in public spaces, often outdoors. However, there has been little empirical research about the ways in which environmental factors affect individuals experiencing homelessness (IEHs). Therefore, the purpose of this study was to use an environmental justice approach to understand how cardiopulmonary health of IEHs is affected by episodic poor air quality in Salt Lake County. It was hypothesized that people who had experienced unsheltered homelessness and those who had been experiencing homelessness for longer periods of time would report greater health difficulties from poor air quality exposure. Through a combination of in-person semi-structured interviews with IEHs (n = 138) and access to corresponding state-based service provider databases, researchers examined both overall descriptives of and relationships between types (sheltered and unsheltered) and duration (chronic and non-chronic) of homelessness. More than 61% of IEHs reported physical reactions to air pollution, 37% reported air pollution-related emotional stress, and more than 89% had sought medical attention for a condition related to air pollution. Findings indicate that while IEHs report a number of health effects related to poor air quality, there were no significant differences between individuals based on either sheltered status or duration of their experiences of homelessness. This study provides an initial empirical inquiry to understand how environmental disamenities negatively influence IEHs, as well as noting that sheltered status and duration of homelessness are less impactful than originally hypothesized.

Greek yogurt (GY), a high-protein-low-fat dairy product, particularly prized for its sensory and nutritional benefits, revolutionized the North American yogurt market in less than a decade, bringing with it new sustainability challenges. The standard production of GY generates large volumes of acid whey, a co-product that is a potential source of environmental pollution if not recovered. This study aims to assess the environmental performance of different technologies and identify the main factors for improving GY production. A complete life cycle assessment (LCA) was performed to compare the standard technology (centrifugation) with two new technologies (fortification and ultrafiltration) to reduce acid whey volumes. Three milk protein concentrate alternatives were also assessed. Results show that the technology choice is not a clear discriminant factor. However, minimizing losses and wastage (accounting for 23 to 25% of the environmental impacts for all indicators) beyond the processing plant and selecting milk ingredients (accounting for 63 to 67% of the impacts) with low environmental impacts are key factors in improving the environmental performance of GY systems. From a methodological perspective, the results also highlight a shortcoming in the current International Dairy Federation LCA guidelines (2015) for treating the multifunctionality of GY systems.

Extreme environmental variations (EV), as a phenomenon deriving from climate change (CC), led to an exacerbated uncertainty on water availability and increased the likelihood of conflicts regarding water-dependent activities such as agriculture. In this paper, we investigate the role of conflict resolution mechanisms -one of Ostrom’s acclaimed Design Principles (DPs)- when social-ecological systems (SESs) are exposed to physical external disturbances. The theoretical propositions predict that SESs with conflict-resolution-mechanisms will perform better than those without them. We tested this proposition through a framed-field-experiment that mimicked an irrigation system. In this asymmetric setting, farmers were exposed to two (2) dilemmas: (i) how much to invest in the communal irrigation system’s (CIS) maintenance and (ii) how much water to extract. The setting added a layer of complexity: water availability did not only depend on the investment but also on the environmental variability. Our findings largely confirmed the theoretical proposition: groups with stronger institutional robustness are able to cope with EV better than those with weaker robustness. However, we also found that some groups, despite lacking conflict-resolution-mechanisms, were also able to address EV. We explored potential explanatory variables to these unexpected results. We found that subjects’ and groups’ attributes might address uncertainty and avert conflict. Thus, SESs’ capacity to respond to external disturbances, such as EV, might not only be a question of DPs. Instead, it might also be strongly related to group members' attributes and group dynamics. Our results pave the way for further research, hinting that some groups might be better equipped for mitigation measures, while others might be better equipped for adaptation measures.

The recent detection of SARS-CoV-2 RNA in feces has led to speculation that it can be transmitted via the fecal-oral/ocular route. This review aims to critically evaluate the incidence of gastrointestinal (GI) symptoms, the quantity and infectivity of SARS-CoV-2 in feces and urine, and whether these pose an infection risk in sanitary settings, sewage networks, wastewater treatment plants, and the wider environment (e.g. rivers, lakes and marine waters). Overall, severe GI dysfunction is only evident in a small number of COVID-19 cases, with 11 ± 2% exhibiting diarrhea and 12 ± 3% exhibiting vomiting and nausea. In addition to these cases, SARS-CoV-2 RNA can be detected in feces from some asymptomatic, mildly- and pre-symptomatic individuals. Fecal shedding of the virus peaks in the symptomatic period and can persist for several weeks, but with declining abundances in the post-symptomatic phase. SARS-CoV-2 RNA is occasionally detected in urine, but reports in fecal samples are more frequent. The abundance of the virus genetic material in both urine (ca. 10²-10⁵ gc/ml) and feces (ca. 10²-10⁷ gc/ml) is much lower than in nasopharyngeal fluids (ca. 10⁵-10¹¹ gc/ml). There is strong evidence of multiplication of SARS-CoV-2 in the GI tract and infectious virus has occasionally been recovered from both urine and stool samples. The level and infectious capability of SARS-CoV-2 in vomit remain unknown. In comparison to enteric viruses transmitted via the fecal-oral route (e.g. norovirus, adenovirus), the likelihood of SARS-CoV-2 being transmitted via feces or urine appears lower due to the lower relative amounts of virus present in feces/urine. The biggest risk of transmission will occur in clinical and care home settings where secondary handling of people and urine/fecal matter occurs. In addition, while SARS-CoV-2 RNA genetic material can be detected by in wastewater, this signal is greatly reduced by conventional treatment. Our analysis also suggests the likelihood of infection due to contact with sewage-contaminated water (e.g. swimming, surfing, angling) or food (e.g. salads, shellfish) is extremely low or negligible based on very low predicted abundances and limited environmental survival of SARS-CoV-2. These conclusions are corroborated by the fact that over eight million global cases of COVID-19 have occurred, but exposure to feces or wastewater has never been implicated as a transmission vector.

High levels of air pollution can contribute to high rate of the COVID-19 outbreaks. Air pollutants induce oxidative stress, inflammatory process, immune imbalance and coagulation at systemic level, making the organism susceptible to complications caused by various pathogens, including viruses, resulting in a possible important damage co-factor. Sperm cells are highly sensitive to the pro-oxidant effects of environmental pollutants, and may represent an important alarm bell indicating that the burden of environmental pressure in a certain area is causing damage to humans. A comparison of the maps of COVID-19 case fatality rates, male infertility rates and air pollution may suggest a way to understand the dynamics of the virus impact. Semen quality may be considered as an early and sensitive environmental marker, and also a potential susceptibility indicator to viral insults (including SARS-CoV-2 ) in heavily polluted areas. Therefore, assessing the burden of environmental exposure of a given population and its potential susceptibility to insults through early biological stress indicators may be helpful for predicting the risk of the adverse effects by the SARS-CoV-2 epidemic .

Corporate sustainability reporting, also known as Triple-bottom-line reporting, involves reporting nonfinancial and financial information to a broader set of stakeholders than just shareholders and seek to fortify an organization’s ability to manage key risks. The current case is that, the quality, rigor, and utility of sustainability reporting remains contentious with concerns about the suitability of the criteria or standards used to prepare the reports. Despite the rapid increase in the number of companies around the world adopting Global Reporting Initiative standards, little is known about the extent of practice of corporate sustainability reporting in public universities in Kenya. The study selected five universities that had their 2017-18 audited financial reports available online for the readers, which served as the main source of secondary data. The guidelines on corporate sustainability reporting was derived from literature review, which provided key indicators upon which the data from each university was evaluated. It was observed that almost all the institutions recognize the critical role of both internal and external independent audit of financial statements. In conclusion, financial reporting sustainability is guided by strict compliance to the factors of sustainability.

The formation of sinkholes in Winkler County, Texas is concerning due to the amount of oil and gas infrastructure and the potential for catastrophic losses. Evidences of new and potential sinkholes have been documented, and determining the cause of these sinkholes is paramount to mitigate the devastating consequences thereof. Studies shown that the Wink sinkholes result from both natural and anthropogenic influences. Data depicting land-cover changes, alterations in the hydrologic systems, climate changes, and oil and gas activity were analyzed in an effort to better understand the link between these processes and sinkhole formation. Results indicate that the combination of these processes lead to the current state; Land cover changes were highest in shrub versus grasses, undeveloped to developed and croplands. Rises in temperature and a decrease in precipitation indicate a shift towards a more arid climate. Changes to the hydraulic system are a direct result of these land cover changes while the groundwater quality depict an environment prone to dissolution. Historical oil and gas activities have created pathways of meteoric water infiltration to the underlying limestone and evaporite formation. The combination of these processes create an environment that accelerates sinkhole formations. Understanding these processes allows for the development and implementation of better land practices, better groundwater protections, and the need for monitoring and maintaining aging oil and gas infrastructure.

Over the last decades, the coated glass products, and especially the low-emissivity coatings have become a common building material used in modern architectural projects. More recently, these material systems became common in specialized glazing systems featuring solar energy harvesting. Apart from achieving the stability of optical parameters in multilayer coatings, it is also important to have improved control over the design of visual color properties of the coated glass. We prepare metal-dielectric composite (MDC) based multilayer thin-film structures using the RF-magnetron sputtering deposition and report on their optical and chromaticity properties in comparison with these obtained using pure metal-based Dielectric/Metal/Dielectric (DMD) trilayer structures of similar compositions. Experimentally achieved Hunter L, a, b values of MDC-based multilayer building blocks of coatings provide a new outlook on the engineering of future-generation optical coatings with better color consistency and developing approaches to broaden the range of achievable color coordinates and better environmental stability.

Community-engaged research is understood as existing on a continuum from less to more community engagement, defined by participation and decision-making authority. It has been widely assumed that more is better than less engagement. However, we argue that what makes for good community engagement is not simply the extent but the fit or alignment between the intended approach and the various contexts shaping the research projects. This article draws on case studies from three Community Engagement Cores (CECs) of NIEHS-funded Environmental Health Science Core Centers (Harvard University, UC Davis and University of Arizona,) to illustrate the ways in which community engagement approaches have been fit to different contexts and the successes and challenges experienced in each case. We analyze the processes through which the CECs work with researchers and community leaders to develop place-based community engagement approaches and find that different strategies are called for to fit distinct contexts. We find that alignment of the scale and scope of the environmental health issue and related research project, the capacities and resources of the researchers and community leaders, and the influences of the socio-political environment are critical for understanding and designing effective and equitable engagement approaches. These cases demonstrate that the types and degrees of alignment in community-engaged research projects are dynamic and evolve over time. Based on this analysis, we recommend that CBPR scholars and practitioners select a range of project planning and management techniques for designing and implementing their collaborative research approaches and both expect and allow for the dynamic and changing nature of alignment.

Dams design and their operation cause strong environmental alteration and therefore a long-term debate is ongoing for the scale of these projects. At the same time, the concept of Environmental Flow Assessment (EFA) is a crucial element of modified ecosystems featuring large infrastructure such as dams and reservoirs for mitigating potential environmental degradation while they operate. Nowadays, integrated scientific frameworks are required to quantify the risks caused by large infrastructure. Through the use of stochastic analysis, it is possible to quantify these uncertainties, and present a solution that incorporates long-term persistence and environmental sustainability into a balanced reservoir simulation model. In this work, an attempt is made to determine a benchmark reservoir size incorporating hydrological and ecological criteria though stochastic analysis. The primary goal is to ensure the best possible conditions for the ecosystem, and then secondarily to allow a steady supply of water for other uses. Using a synthetic timeseries based on historical inputs, it is possible to determine and preserve essential statistical characteristics of a river’s streamflow, and use these to detect the optimal reservoir capacity that maximizes environmental and local water demand reliability.

In recent years, the anticipation of sustainable commercial supersonic jet operations has elevated again. Advances in propulsion together with the increased usage of composite materials favour the potential of sustained and cost efficient supersonic commercial operations. However, obstacles remain with regards to the certification of the new supersonic aircraft platforms, while the two main certification bodies EASA and FAA are under pressure to develop certification requirements which will reassure that the supersonic operations are going to have the least possible environmental impact. From a design perspective, past and current research suggests that a trade-off exists between the aircraft performance and the environmental impact, which should be balanced. The current study attempts to balance this trade-off and to conceptually design a SuperSonic Business Jet (SSBJ) by taking into account environmental concerns of the supersonic flight together with design methods that facilitate a sustained supersonic cruise. An environmental impact assessment is undertaken for the SSBJ design and its results are compared to a typical commercial subsonic airliner.

Mineral profile of beef interests human health, but also animal performance and meat quality. This study analyzes the relationships of 20 minerals in beef (ICP-OES) with 3 animal performance and 13 meat quality traits analyzed on 182 samples of Longissimus thoracis. Animals’ breed and sex showed limited effects. The major sources of variation (farm/date of slaughter, individual animal within group and side/sample within animal) differed greatly from trait to trait. Mineral contents were correlated to animal performance and meat quality being significant 52 out of the 320 correlations at the farm/date level, and 101 out of the 320 at the individual animal level. Five latent factors explained 69% of mineral co-variation. The most important, “Mineral quantity” factor correlated with age at slaughter and with the meat color traits. Two latent factors (“Na+Fe+Cu” and “Fe+Mn”) correlated with performance and meat color traits. Two other (“K-B-Pb” and “Zn”) correlated with meat chemical composition and the latter also with carcass weight and daily gain, and meat color traits. Meat cooking losses correlated with “K-B-Pb”. Latent factor analysis appears be a useful means of disentangling the very complex relationships that the minerals in meat have with animal performance and meat quality traits.

Dendritic cells (DCs) are the professional antigen-presenting cells that recognize and present antigens to naïve T cells to induce antigen-specific adaptive immunity. Among the T-cell subsets, T helper type 2 (Th2) cells produce the humoral immune responses required for protection against helminthic disease by activating B cells. DCs induce a Th2 immune response at a certain immune environment. Basophil, eosinophil, mast cells, and type 2 innate lymphoid cells also induce Th2 immunity. However, in the case of DCs, controversy remains regarding which subsets of DCs induce Th2 immunity, which genes in DCs are directly or indirectly involved in inducing Th2 immunity, and the detailed mechanisms underlying induction, regulation, or maintenance of the DC-mediated Th2 immunity against allergic environments and parasite infection. A recent study has shown that a genetic defect in DCs causes an enhanced Th2 immunity leading to a severe atopic dermatitis. We summarize the Th2 immune-inducing DC subsets, the genetic and environmental factors which involved in DC-mediated Th2 immunity, and current therapeutic approaches for Th2-mediated immune disorders. This review is to provide an improved understanding of DC-mediated Th2 immunity and Th1/Th2 immune balancing, leading to control over their adverse consequences.

Abstract: Background: Exposure to ETS (Environmental Tobacco Smoke) is one of the most toxic environmental exposures. Objective: To investigate the impact of ETS on physiological, biochemical, psychological indicators, on the urine antioxidant capacity (AC) and oxidative damage to lipids in a pilot sample of healthy pregnant women. Methods: The exposure to ETS was investigated by a validated questionnaire, urine cotinine and the marker of oxidative damage to lipids - 8-isoprostane concentrations using an ELISA kit. Urine AC was determined by the spectrophotometric TEAC method. From the sample of pregnant women (n=319, average age 30.84 ± 5.09 years) in 80 the levels of cotinine and oxidative stress markers were analyzed. Results: From our sample, 5 % individuals (7.4 % objectified by cotinine) were current smokers and 25 % reported passive smoking in the household (18.8 % objectified by cotinine). The Kappa was 0.78 for smokers and 0.22 for ETS exposed non-smokers. Smokers as well as non-smokers had significantly higher (p<0.05) urine AC than ETS exposed non-smokers. Non-smokers had significantly lower levels of 8-isoprostane than smokers (p<0.01) and ETS-exposed non-smokers (p<0.05). Correlations between urine levels of cotinine and AC were positive in ETS exposed non-smokers. Conclusion: The harmful effect of active and passive smoking on oxidative stress parameters has been indicated.

Abstract: The aim of this study was to compare the influence of corporate board characteristics on the extent of environmental disclosure quantity of listed firms in two leading emerging economies in Africa, South Africa (integrated reporting framework) and Nigeria (traditional reporting framework). Methods: The sample was comprised of 303 firms including environmentally sensitive companies purposively selected for content analysis study in South Africa (213) and Nigeria (90). We used both descriptive, multivariate and regression models to comparatively analyze the differences about corporate board characteristics as determinants of the extent of their environmental disclosure quantity. Results: The results reveal a more significant positive association between board characteristics and environmental disclosure in South Africa and less relevant association in Nigeria. Also, the results support that board independence arrangement may serve as bonding mechanisms in weak reporting environments, suggesting a substitutive relationship between board independence and the regulatory framework. Quiet revealing a board with environmental committee show a higher tendency to be ecologic transparent in both countries. However, in a traditional reporting framework, the environmental committee is not enough; its effect was insignificant and highly significant in the integrated reporting framework. Further revealed is the significant positive effect of industry membership influence on environmental disclosure. In all estimated models of South Africa sample show that 45% of environmentally sensitive industries significantly influence environmental disclosure, while 51% is environmentally polluting industries in Nigeria show less concern on environmental disclosure. Interestingly, Audit firm size (Big4) positively and statistically significantly associated with overall environmental reporting in both countries. The results are consistent with stakeholder theory, agency theory, institutional and legitimacy theory suggesting that a strong board size, independent members of the board with auditing experience, the active environmental committee in conjunction with solid audit reputation may reduce information asymmetry. Our findings will be helpful for policymakers and other regulators who are interested in environmental impact reporting.

The devastating growth in the worldwide frequency of neurocognitive disorders and its allied difficulties such as decline in memory, spatial competency, and ability to focus poses a significant psychological public health problem. Inhibitor of Differentiation (ID) proteins are members of a family of helix-loop-helix (HLH) transcription factors. ID proteins have been demonstrated to be involved in neurodevelopmental & depressive diseases and thus may influence neurocognitive deficiencies due to environmental exposure. Previously, it has been demonstrated that environmental factors such as estrogenic endocrine disruptors (EEDs) have played an essential role in the influence of various neurocognitive disorders such as Alzheimer’s, Dementia, and Parkinson’s disease. Based on this increasing number of reports, we consider the impact of these environmental pollutants on ID proteins. Better understanding of how these ID proteins by which EED exposure can affect neurocognitive disorders in populations will prospectively deliver valuable information in the impediment and regulation of these diseases linked with environmental factor exposure.

Wireless sensor networks can provide a cheap and flexible infrastructure to support the measurement of noise pollution. However, the processing of the gathered data is challenging to implement on resource-constrained nodes, because each node has its own limited power supply, low-performance and low-power micro-controller unit and other limited processing resources, as well as limited amount of memory. We propose a sensor node for monitoring of indoor ambient noise. The sensor node is based on a hardware platform with limited computational resources and utilizes a number of simplifications to approximate more complex and costly signal processing stage. Furthermore, to reduce the communication between the sensor node and a sink node, as well as the power consumed by the IEEE 802.15.4 (ZigBee) transceiver, we perform digital A-weighting filtering and non-calibrated calculation of the sound pressure level on the node. According to experimental results, the proposed sound level meter can accurately measure the noise levels of up to 100~dB, with the mean difference of less than 2~dB compared to Class 1 sound level meter. The proposed device can continuously monitor indoor noise for several days. Despite the limitations of the used hardware platform, the presented node is a promising low-cost and low-power solution for indoor ambient noise monitoring.

Atmospheric pollution arising from diesel-powered engines can result in acute and chronic diseases of the respiratory and cardiovascular systems. The annual carnival festival that takes place in the city of Salvador, Bahia-Brazil, is a large-scale event that gathers approximately 2 m revelers and 170,000 workers who accompany dozens of sound-trucks, or trios elétricos, for a period of seven days. These slow-moving sound-trucks run on diesel fuel, constantly exposing those around them to exhaust fumes. The present study aimed to evaluate air quality along the approximately 10km-long carnival parade circuit and determine possible impacts on human health. We applied a three-phase risk analysis strategy from 2007–2009: 1) hazard identification, 2) risk characterization and 3) risk management. Our quantification of atmospheric particulate matter 2.5 (PM2.5) and nitrogen dioxide (NO₂) concentrations revealed variable levels of PM2.5 ranging from 19 µg/m³ to 580 µg/m³, with peaks of up to 800 μg/m³ at sound-truck concentration areas. We then assessed the effects of air pollution on human health using ophthalmologic parameters obtained from 28 carnival volunteers, who often presented symptoms of eye irritation. Finally, we established strategies to communicate the study’s objectives and obtained results to the population through media outlets and open discussions with government agencies. According to our risk analysis, carnival sound-trucks represent the main source of atmospheric PM2.5 and NO₂ pollution during the annual 7-day carnival festival. As a consequence of our research, the municipal government of Salvador issued an addendum to its carnival legislation mandating organizers to monitor atmospheric pollution, and, subsequently, all large-scale public events. Municipal government authorities have also promoted a shift from petroleum-based diesel fuel to biodiesel, a less-polluting fuel, for all adapted carnival sound-trucks. Our approach, which employed easily accessible and inexpensive methodology, provided substantial scientific evidence to support improvements in the regulation of air quality during large-scale public events held in the city of Salvador.Keywords: environmental

Membrane gas absorption technology has been considered as a promising approach to mitigate CO2 emissions from power plants. The aim of this study is to evaluate the environmental impacts of CO2 absorption and desorption processes by hollow fiber membrane contactors using life cycle assessment methodology. On the basis of ReCipe 2016 Midpoint and ReCipe 2016 Endpoint methods, the research results show that, membrane gas absorption system exhibits the lowest environmental impacts across the majority assessed categories in comparison with chemical absorption and membrane gas separation systems. The CO2 capture process via membrane gas absorption has the most significant impact on METP category, with heat consumption as the primary contributing factor accounting for 55%, followed by electricity consumption accounting for 43.1%. According to the sensitivity analysis, heating by natural gas shows a better performance than other heat supply sources in improving overall environmental impacts. In addition, the increasing utilization of renewable energy in electricity supply reduces the global warming potential, fossil resource consumption and ozone formation.

The growing urgency for sustainable energy solutions necessitates a deeper understanding of the environmental impacts of renewable technologies. This article aims to synthesize and analyze Life Cycle Assessments (LCA) in this domain, providing a comprehensive perspective. We systematically categorize 2,923 articles into four communities: (1) Photovoltaic systems, (2) Wind energy systems, (3) Materials for auxiliary industry of photovoltaic and wind systems, and (4) Solar thermal systems. A comparative analysis is conducted to identify methodological consistencies and disparities across these communities. The findings reveal diverse methodological approaches and a range of environmental impacts, highlighting the complexities in assessing renewable energy systems. The article underscores the significance of material selection in photovoltaic and wind systems, providing a critical overview of the current state of LCA research in renewable energy and stressing the need for standardized methodologies. It also identifies gaps in recent research, offering insights for future studies focused on integrating environmental, economic, and social considerations in renewable energy assessments.As a case study, an LCA was used to evaluate two energy supply methods for a sensor network: one connected to the public grid and another powered by a photovoltaic panel. The off-grid system, while more environmentally friendly by reducing reliance on non-renewable energy sources, posed challenges due to the high environmental impact of battery production and disposal. Integrating environmental assessments provides a robust framework for making informed decisions on sustainable technologies. The findings are critical for projects that balance technological needs with sustainability goals.

Air quality is a topic of growing relevance on the global agenda. Two key indicators of air quali-ty, nitrogen dioxide (NO2) and carbon monoxide (CO), represent significant hazards to human health and the environment putting the sustainability of natural resources at risk. Therefore, it is imperative to regularly monitor and reduce atmospheric pollutant concentrations to mitigate their harmful consequences. This study presents an analysis of NO2 total and CO emissions in Argentina, utilizing remote sensing data. The research aims to determine the spatiotemporal distribution of NO2 and CO emissions in Argentina from 2019 to 2021. Subsequently, it seeks to establish the influence of land uses and land cover on the emission of NO2 and CO through dif-ferent climatic, anthropic, and natural indicators. The study was carried out in Argentina during the period 2019-2021, where random points were placed for the different land covers with a total of 800 points surveyed. The year with the highest CO concentration (mol/m-2) was 2020. The values were highest for tree covers and herbaceous wetland coverage in the northern part of the country. For total NO2, the highest concentrations were reached during the years 2020 and 2021. Regarding its distribution, throughout the evaluated period, the highest concentrations of total NO2 were found in the built-up and cropland coverages, with the capital of the country and the northern region of the Buenos Aires province being the most affected areas. In addition, the concentration of CO was influenced by climatic variables (atmospheric pressure, wind speed, maximum environment temperature, Palmer index), natural (height, humidity, NDVI), and ur-ban variables (distances to mining extraction, airports, power plants, urban index) for the differ-ent uses and land covers. Finally, the concentrations of total NO2 were influenced by climatic variables (Palmer index and wind speed), natural (height and NDVI), and urban variables (dis-tance to airports, power plants, industries, service stations, and open dumpsites) for the differ-ent uses and land cover. This study contributes to sustainable environmental management, ena-bling the formulation of effective strategies for mitigating emissions and promoting the long-term health and well-being of communities.

This paper undertakes a comprehensive review to underscore the central role of sustainability in the evaluation and innovation of jet grouting technologies. It meticulously traces the evolution of evaluation methodologies, emphasizing the imperative of sustainable practices throughout history. Traditional evaluation paradigms are examined alongside contemporary trends, with a particular focus on sustainability metrics and visualization techniques. Through an examination of innovative jet grouting technologies, this paper illustrates how sustainability principles have driven advancements aimed at improving the efficiency and environmental impact of jet grouting methods. Central to this review is an assessment of sustainability across multiple dimensions, including method applicability, installation and operational compatibility, and the performance of the resulting jet grouted piles. By emphasizing sustainability considerations, the paper highlights the intrinsic link between environmental integrity and technological innovation in the field of jet grouting. In addition, it discusses analytical evaluation methods designed to proactively address sustainability concerns prior to construction, thereby promoting a more environmentally responsible approach. Finally, this paper presents a pioneering evaluation framework that integrates real-time monitoring and visualization tools, allowing stakeholders to track sustainability milestones throughout the construction process. By emphasizing sustainability as a guiding principle, this review advocates for a paradigm shift toward more ecologically sound and resilient jet grouting practices.

The oil and gas industry in Nigeria, a vital contributor to the nation's economy, has long been associated with significant environmental challenges. Pollution, habitat destruction, and greenhouse gas emissions have raised global concerns about sustainability and corporate responsibility. This empirical study explores the relationship between environmental accounting practices and the financial performance of listed oil and gas companies in Nigeria. We investigated eight oil and gas companies that are publicly traded on the Nigerian Stock Exchange Market (NGX) as of January 17, 2022, from 2011 to 2022. The study employs Driscoll-Kraay standard errors and reveals that environmental accounting had significant effects on returns on assets, earnings per share, and liquidity ratio. The study revealed that the implementation of environmental accounting practices had diverse effects on the performance of oil and gas companies in Nigeria. The findings encourage policymakers and stakeholders in the sector to utilise the insights and design more effective regulations and incentives that promote environmental corporate responsibility. Also, valuable insights into the potential benefits and challenges associated with adopting environmental accounting practices, and influencing the decision-making processes of corporate stakeholders were provided to ensure sustainability in terms of improved financial performance of the oil and gas sector in Nigeria.

Background: The study aimed to investigate the association between environmental tobacco smoke exposure and the risk of wheezing among rural and urban preschool children in Mpumalanga province, South Africa, an area associated with poor air quality. Methods: In this study, parents/caregivers of preschool children (n=3145) completed a modified International Study of Asthma and Allergies in Childhood (ISAAC) questionnaire. Data were analysed using multiple logistic regression models. Results: The overall prevalence of Wheeze ever was 15.14%, with a higher prevalence in urban pre-schoolers than rural pre-schoolers (20.71% vs 13.30 %, P<0.000). Moreover, the total prevalence of asthma ever was 2.34%. The prevalence was greater in urban pre-schoolers than in rural pre-schoolers (3.92% vs 1.81%, P<0.001). In the final adjusted model, both urban and rural area children who lived with one or more people who smoked in the same household (WE: OR 1.44, 95% CI 1.11-1.86) (CW: OR 2.09, 95% CI 1.38-3.16) and (AE: OR 2.49, 95% CI 1.12-5.54) were found to have an increased likelihood of having Wheeze Ever, Current Wheeze and Asthma Ever as compared to those who lived with non-smokers. Conclusions: The implementation of smoking limits and prohibition is crucial in areas that are frequented or utilized by children. Hence, it is imperative for healthcare providers to actively champion the rights of those who do not smoke within the society, while also endorsing legislative measures aimed at curtailing the extent of tobacco smoke exposure.

Quantifying different stocking rates effects in three study areas placed at Mediterranean forest (Cuenca, Spain) was conducted by applying a multiparametric soil quality index, SQI, developed in undisturbed forest soils (> 40 years). The main objective is to advance in the development and application of multiparametric indexes which allow for soil condition assessment. For it, is analyse the effectiveness of a multiparametric soil quality index (SQI) as an indicator livestock impacts on the soil in mediterranean forests. Control areas without stocking rates were compared in forest stands with different age (Thicket forest stand, < 30 years; High polewood forest stand, 30-60 years; Old growth forest stand, > 60 years); with various intensity grazing areas (permanent livestock passage: inactive sheepfold for 2-3 years, and active sheepfold; intermittent livestock passage: bare soil, pine stand, scrubland). The multiparametric soil quality index (SQI) applied sensitive to changes in forest ecosystems depending of different stocking rates. However, for even more preci-sion to assess cattle alteration, multiparameter index recalibrated, creating a new one; Soil Status Index by Livestock (SSIL). Correlation between quality ranges obtained with both indexes in dif-ferent study areas suggest that SSIL can be considered a livestock impact reference indicator in Mediterranean forest soils.

Before December 2020, Antarctica had remained free of Covid-19 cases. The main concern during the pandemic was the limited health facilities available at Antarctic stations to deal with the disease, as well as the potential impact of SARS-CoV-2 on Antarctic wildlife through reverse zoonosis. In December 2020, 60 cases emerged in Chilean Antarctic stations, disrupting the summer campaign with ongoing isolation needs. The SARS-CoV-2 RNA was detected in the wastewater of several scientific stations. In Antarctica, treated wastewater is discharged directly into the seawater. No studies currently address recovery of infectious virus particles from treated wastewater, but their presence raises the risk of infecting wildlife and initiating new replication cycles. This study highlights the initial virus detection in wastewater from Antarctic stations, identifying viral RNA via RT-qPCR targeting various genomic regions. The virus's RNA was found in effluent from two wastewater plants at Maxwell Bay and O’Higgins Station on King George Island and the Antarctic Peninsula, respectively. This study explores the potential for reverse zoonotic transmission of SARS-CoV-2 from humans to Antarctic wildlife due to the direct release of viral particles into seawater. The implications of such transmission underscore the need for continued vigilance and research.

Heavy metal pollution poses a significant threat to global populations, particularly impacting human health. Developing countries, characterized by chemical engineering and mining industrial activities, often contribute to diverse heavy metal contaminants. Consumption of water contaminated with heavy metals, prevalent in such regions, can lead to severe health risks, including gastric cancer. Addressing the urgent issue of heavy metal pollution, this paper employs a bibliographic approach to explore the latest literature on heavy metal pollution. The study discusses recent research findings and potential methods for the treatment and mitigation of heavy metal pollution, emphasizing the pressing need for effective solutions to safeguard public health.

Structural health monitoring (SHM) has become paramount for developing cheaper and more reliable maintenance policies. The advantages coming from adopting such process have turned out to be particularly evident when dealing with plated structures. In this context, state-of-the-art methods are based on exciting and acquiring ultrasonic guided waves through a permanently installed sensor network. A baseline is registered when the structure is healthy, and newly acquired signals are compared to it to detect, localize and quantify damage. To this purpose, the performance of traditional methods based on tomographic algorithms has been overcome by machine learning approaches, which allow processing a larger amount of data without losing diagnostic information. However, to date, no diagnostic method can deal with varying environmental and operational conditions. This works aims to develop a framework for mitigating the impact of temperature variations on ultrasonic guided wave-based SHM through generative artificial intelligence. A variational autoencoder and singular value decomposition were combined to learn the influence of temperature on guided waves. After training, the generative part of the algorithm was used to reconstruct signals at new unseen temperatures. Moreover, a refined version of the algorithm called forced variational autoencoder was introduced to further improve the reconstruction capabilities. The accuracy of the proposed framework was demonstrated against real measurements on a composite plate.

Abstruct Green Human Resource Management (GHRM) has emerged as an essential strategy for achieving environmental sustainability within organizations. However, there remains a significant gap in understanding its direct impact on sustainable performance. This study seeks to address these gaps by investigating the relationship between GHRM and sustainable performance, with a focus on the mediating role of green innovation and the moderating influence of transformational leadership. A cross-sectional study was conducted among Malaysian small and medium-sized enterprises (SMEs) to explore the interrelationships between Green HRM, green process and product innovation, sustainability, and the role of sustainable leadership. The study's findings reveal a positive and significant relationship between green HRM practices and sustainability, encompassing environmental, economic, and social aspects. The findings suggest that management support for environmental initiatives is a critical factor in enhancing the effectiveness and spread of green innovations, emphasizing the importance of GHM in the broader context of organizational change and sustainability. In addition, the study underscores the critical role of transformative leadership in fostering sustainable practices, particularly the significant moderator role of responsible leadership in driving sustainable business practices. In summary, this study provides a roadmap for businesses, particularly SMEs, to leverage HGRM as a strategic tool in their pursuit of sustainability.

This review explores the transformative impact of sensor technologies in early disease detection. It highlights recent advancements in nanotechnology-based sensors, particularly focusing on their applications in identifying disease biomarkers at early stages. The integration of these sensors with artificial intelligence for predictive analytics in healthcare is also discussed. Applications in cancer, infectious diseases, and chronic disease management underscore their diverse utility. Challenges in sensor technology adoption and future directions, including multiplexed sensors and wearable devices, are examined. This review underscores sensors' potential in enhancing disease management and patient outcomes.

Microplastic contamination, defined as plastic particles less than 5 mm in size, has become a major global environmental concern. This study synthesizes findings from carefully chosen studies undertaken in a variety of geographical areas and ecosystems, offering light on the multifaceted issues posed by microplastic pollution. These articles show the global prevalence of microplastics in both land and marine ecosystems. Seasonal fluctuations in microplastic abundance highlight the cyclical nature of this pollution, with larger amounts being reported during the summer months. Tourism, industrialization, and urbanization have all been highlighted as significant contributors to microplastic contamination, stressing the impact of man-made influences. Wastewater treatment plants (WWTPs) have been identified as hotspots for microplastic release into aquatic habitats, emphasizing the need for enhanced treatment procedures. Because microplastics can build up in the food chain, it underlines the possible health problems connected with microplastic pollution for both aquatic creatures and human consumers. Longitudinal studies, geographical variety, in-depth health and ecological impact evaluations, standardization, and effective mitigation methods should be prioritized in future studies. To address this worldwide issue, interdisciplinary collaboration among scientists, health professionals, politicians, and industrial stakeholders is required.

Background Scientific literature in psychology considers personality as an organization of ways of being, knowing, and acting that ensures unity, coherence and continuity, stability and planning of the individual's relations with the world (Caprara & Gennaro, 1994). Personality is the outcome of two distinct constructs: Temperament and Character. So, personality is the result of the interaction between biological aspects (temperament) and the experiences that anybody experiences in his own life, interacting with the environment (Cloninger et al., 1993). Scientific literature now largely agrees that adversity in the early years of life has broad long-term consequences on the neuroendocrine, immune, and metabolic systems (Kim et al., 2019), as well as on neuroplasticity and neuronal morphology that alter the overall evolution of (van Bodegom, et al., 2017; Edwards et al., 2010). Here we analyze the hypothesis that maternal environmental factors (air and chemical pollutants, maternal health, eating behaviors, maternal and fetal stresses, caregivers' behaviors, etc.) can cause epigenetic alterations in the offspring in the prenatal and perinatal period that shape the trait's personality of the offspring themselves and that orient part of their character in adult life. Methods The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement was used to develop this systematic review. PubMed, Scopus, PsycINFO, and Biosis databases were searched for primary research articles published between 2010 and 2023 looking for English language articles containing the term "prenatal" and any of the following terms: "anxiety"; "brain development"; "depression"; "gestation"; "maternal health"; "maternal stress"; "mental health"; "newborn health"; "perinatal programming"; "pregnancy"; "prenatal stress"; "resilience to stress"; "transgenerational epigenetic inheritance"; "personality"; "personality trait"; "environmental epigenetics". Retrieved articles were screened and a subset of relevant abstracts was then selected for a more detailed evaluation. The final studies selected consisted of those resources that directly evaluated the relationship between maternal environmental factors and the personality traits of the offspring. Results and Conclusions One hundred and eleven studies were identified but only three met the primary question. There is evidence to support the hypothesis of correlations between environmental exposure during the intrauterine fetal period and personality traits of the newborn. Limits: multiple limitations were found based on the lack of research on this specific topic, although such a field of research can be important for developing effective strategies for primary prevention.

Accurate pathogenic detection in wastewater is critical for safeguarding public health and the environment. However, the presence of free nucleic acids in wastewater samples poses significant challenges to molecular detection accuracy. This comprehensive review explores the current status and future potential of pretreatment methods to remove free nucleic acids from wastewater samples. The study contributes a comprehensive analysis of the mechanisms, strengths, and limitations of various pretreatment approaches, including physical, chemical, and enzymatic processes. The effect of various factors on the removal efficiency of these pretreatment methods is also discussed. This review enhances our comprehension of pretreatment techniques and their vital role in achieving precise pathogenic detection in complex wastewater matrices. Furthermore, it outlines future perspectives and developments for improving the speed and effectiveness of pathogenic detection, contributing significantly to disease surveillance, early warning systems, and environmental protection.

Traffic congestion is a persistent and challenging problem in urban areas, leading to increased travel times, fuel consumption, and environmental pollution. Signalized intersections play a pivotal role in regulating traffic flow, and their efficiency has a direct impact on the overall traffic performance of a city. This study investigates the effect of traffic signal in managing traffic volume and reducing congestion and delays at signalized intersections through a comprehensive analysis of existing research, data collection, and simulations.The research begins by analyzing the traffic characteristics by an installed LiDAR sensor at E Cold Spring Ln – Hillen Rd intersection in Baltimore City, MD. When the signal at this intersection stopped working for some hours during a working day in September 2023, the LiDAR recorded vehicle and pedestrian counts, vehicle-vehicle and vehicle-pedestrian conflicts, and jaywalking events conflicts. The research aims to assess the impact of traffic signal failures on traffic flow, congestion, safety (V2V and V2P conflicts), and the frequency of jaywalking events before, during, and after improper performance of the traffic signal. Furthermore, this study explores the factors influencing traffic signal performance, including traffic demand, geometric layout, pedestrian interactions, and the integration of emerging technologies. The analysis results highlighted the importance of signal control systems existence at this intersection that can adjust signal timing in response to changing the real-time traffic conditions.Reduced congestion, minimized delays, and enhanced traffic flow are observed outcomes, contributing to a more sustainable and efficient urban transportation system. However, it is crucial to consider the trade-offs and challenges associated with traffic signal optimization, such as the potential for increased travel times for certain modes of transportation and the need for ongoing maintenance and updates. In conclusion, this study underscores the pivotal role of traffic signals in managing traffic volume and reducing congestion and delays at signalized intersections. Through evidence-based analysis and innovative signal control strategies, urban planners and transportation authorities can work towards creating more efficient, sustainable, and less congested transportation networks. The insights derived from this research can inform policy decisions and guide the development of future traffic management solutions, ultimately leading to improved quality of life in urban areas.

In many ports, the ship's speed is limited for the safety of navigation. At the same time, ship captains and port pilots choose the speed of the ship, but not higher than the permitted speed of the ship in the port, therefore the speed of the ship also depends on the experience of the ship captains and port pilots and the sailing conditions of the ship in specific conditions. Choosing the optimal speed of ships in port, including the effect of shallow depth, can reduce fuel consumption and ship emissions in ports, which is important for the development of green and sustainable ports. In all cases, shipping safety is the highest priority. The main objectives of the article are determining the optimal speed of ships in ports with low clearance, ensuring navigational safety, reducing fuel consumption and emissions, and at the same time creating a sustainable port. The article presents the methodology of optimal ship speed calculation, minimum ship controllable speed maintenance, fuel consumption and emission reduction methodology and their impact on sustainable and green maritime transport and port development. The developed methodology was tested on real ships and with the help of a calibrated simulator, sailing through harbor channels and harbor waters in low clearance conditions.

Background: The seasonal variation of peptic ulcers is a rhythmic phenomenon reported worldwide, exhibiting diverse patterns and controversies. Unfortunately, it has remained an unresolved mystery for more than 90 years. Numerous studies have found that this phenomenon was closely associated with multiple environmental factors, but the underlying mechanism has never been elucidated. Objectives: This study aims to elucidate the seasonal variation of peptic ulcers and identify the role of environmental factors in the disease. Methods: Based on a recently identified etiology of peptic ulcers, two inverse operations in calculus, differentiation and integration, are iterated to analyze the existing data. First, the fluctuation curve in the seasonal variation is differentiated twice into the monthly incidences caused by multiple individual environmental factors, and the fluctuation curve due to each individual environmental factor is generated separately. Second, the monthly incidences caused by the individual environmental factors are integrated twice to reproduce the fluctuation curves in the seasonal variation of peptic ulcers. Results: The differentiations of the fluctuation curves in the season variation reveal a parallel relationship between the psychological impacts of each individual environmental factor and the monthly incidences of peptic ulcers. The integrations of the monthly incidences caused by 3 environmental factors reproduce the fluctuation curves in 3 representative seasonal patterns of peptic ulcers but make the parallel relationships invisible. Discussion: The parallel relationships revealed a causal role of environmental factors in peptic ulcers, whereas the reproduction of the fluctuation curves elucidated that multiple environmental factors cause the seasonal variation of peptic ulcers by Superposition Mechanism. The regional differences in environmental factors result in the diverse patterns, as well as the controversy questioning the seasonality of peptic ulcers. Significantly, the data analyses exemplify the application of a new concept, Superposition Mechanism, which might be an indispensable methodological complement to life science and medicine.

Background: In 1962, Susser and Stein observed that the mortality rates of peptic ulcers in England and Wales increased markedly in the 1910s, maintained at a high level during the 1910s-1940s, and began to decline steadily since the early 1950s. They termed this epidemic pattern a birth-cohort phenomenon, but its mechanism has never been elucidated. Susser and Stein speculated that the occurrences of extraordinary social environmental factors roughly fit the fluctuations, but the role of environmental factors in peptic ulcers has never been identified. Objectives: This study aims to elucidate the mechanism of the birth-cohort phenomenon of peptic ulcers and identify the role of environmental factors in the disease. Methods: Starting from an etiology identified recently, this study uses the two inverse operations in calculus, differentiation, and integration, to analyze the existing data. First, a fluctuation curve in the birth-cohort phenomenon is differentiated into multiple annual mortality rates caused by individual environmental factors. Second, these annual mortality rates are integrated to reproduce the fluctuation curve in the birth-cohort phenomenon. Results: The differentiation reveals a parallel relationship between the psychological impacts of environmental factors and the mortality rates of peptic ulcers, whereas the integration reproduces a representative fluctuation curve in the birth-cohort phenomenon. The successive occurrences of multiple social environmental factors from the 1910s to 1940s maintained the increase in mortality rates, while the sustained improvements in living environments explained the steady decline of the mortality rates from the early 1950s. Conclusion: The parallel relationship suggests a causal role of environmental factors in peptic ulcers, whereas the reproduction of a representative fluctuation curve indicates that multiple environmental factors caused the birth-cohort phenomenon by Superposition Mechanism. Significantly, this study challenges the current reductionist approach used to study disease in modern medicine by demonstrating the effectiveness of an opposite methodological concept focused on integration.

Bisphenol A (BPA) has been identified as one of endocrine disrupting chemicals (EDCs). Due to its massive production (over 700,000 tons per year) and the extensive use of BPA-based plastics (i.e., polycarbonate and epoxy resin) in Taiwan, it was thus included into a toxic substance by the Ministry of Environment. This work surveyed the updated information about the production of BPA and its environmental distributions in Taiwan over the past decade. Furthermore, the regulatory strategies and countermeasures for managing the environmental risks of BPA by the Taiwan government were summarized to show the cross-ministerial efforts under the relevant acts, including the Toxic and Concerned Chemical Substances Control Act (TCCSCA), the Food Sanitation Management Act (FSMA) and the Commodity Inspection Act (CIA). The findings showed that most of the monitoring data showed far below the acceptable risks. However, the people may pose an adverse threat to the aquatic environment and human health via ecological and food chains. In addition, some countermeasures were further recommended to echo the international actions on environmental endocrine disruptors in recent years.

contaminated sites located in each school district. Previous studies showed that various environmental factors, such as exposure to toxic substances negatively impacts human health depending on their concentration and occurrence. Therefore, the study aims to use Geographical Information System (GIS) technology and secondary data on IEP numbers of each school district, chemical occurrence in contaminated sites, and demographic data to conduct a correlational analysis. The secondary data obtained from school districts and contaminated sites from Iowa Department of Natural Resources Facility Explorer were populated in ArcMap 10.5 (a GIS software) for generating maps and data to conduct statistical analysis. The contaminants were categorized into metals, polyaromatic hydrocarbons (PAH), and solvents with weighing factors as 1, 0.5, and 0.25. A total of 1 Superfund site and 39 CERCLA sites were identified as contaminated sites for this study. The majority of contaminants were heavy metals such as lead, arsenic, mercury, and cadmium. The mean toxic score of all contaminated sites combined was 13.4 (sd 14.4). The correlational analysis between the IEP numbers from each school districts and toxic scores from the contaminated sites was positive indicting that increased toxic score increased the number of students enrolled in the IEP program (F=23.7, p<0.0001). The correlational analysis between toxic score and demographics indicated some interesting results. Children under the age of 10 were living in areas with high toxic score and the showed mild correlation (p<0.00052). Similarly, higher number of black population resided in areas with high toxic score (p=0.0032) than the white population (p<0.0001). The result also indicated that children enrolled in IEP were predominantly among the black population (p<0.0001). The correlational analysis between household income and poverty percentage of people residing near the contaminated area indicated that people had low average household income (p=0.0002) and high poverty percentage (p=0.0203) residing in areas with higher toxic score. Regarding the educational status, less number of people with post graduate degree (p<0.0001) resided in areas with high toxic score and more number of people with no degree (p<0.0001) resided in areas with high toxic score. Finally, the study showed the increasing trend of eligible children enrolling in free and reduced lunch programs with increasing toxic scores (p=0.0012) and IEP levels (p=0.0416). This study emphasize on developing multiple exposure to correlate environmental factors contributing to the negative health outcome on people.

Establishing an effective evaluation model to analyze the actual environmental level of the multi-indicator systems is an urgent challenge. However, due to the complexity of the environmental system, the factors that determine the practical system are usually interrelated. To solve this problem, many methods have been proposed and verified. However, the disadvantage of unreasonable weight determination and only single-indicator assessment limits the practical application of these analysis methods. Here, we established an optimized entropy weight model and integrate it with the fuzzy comprehensive evaluation (FCE) method to quantify the complex environmental system. By introducing the linear programming method into the entropy weight solution, we can obtain high accuracy weight values and strong resistance to extreme data. Theoretical and simulation results demonstrate that our method can enhance the precision of weight calculation and evaluation results for multi-factor systems. Our work develops an effective method to quantify the complex environment system comprehensively and is significant to real applications of evaluation method.

The development of a decision framework for landscape governance and management has become one of the prioritised policy instruments for actualising policy objectives relating to agri-food system, biodiversity conservation, nature restoration, environmental management, climate change mitigation and adaptation, net zero greenhouse gas emissions, and the transition to renewable energy supplies in the United Kingdom (UK). However, the landscape lens in policy-making is challenging because of the diverse landscape archetypes, environmental problems, and diverging policy targets that it must address. This highlights the importance of having a robust, evidence-based landscape decisions framework. To address this issue, this study undertakes a systematic review and transdisciplinary synthesis of research outputs from the Landscape Decisions Programme (LDP). This study compiles and synthesizes outputs from the LDP projects in the context of the relevant literature to develop an understanding of the relationships among the emerging evidence with respect to decision-making for more sustainable and multifunctional landscapes. The synthesis analyzed the drivers of landscape decisions, and methodological approaches used to generate evidence for decision-making. The emerging themes from the synthesis were distilled into five principles that can be used as a basis for a roadmap towards the development of a holistic landscape decisions framework.

The Surface Urban Heat Island (UHI) is caused by the difference in temperature between the urban and its surrounding areas. However, in the scientific literature, there is no solid methodology defining urban and non-urban areas, which is essential to estimate the SUHI with greater accuracy. This study uses the official national urban areas limit, to obtain the SUHI more accurately on the nine northeastern Brazilian capitals. The land surface temperature was obtained using the Sentinel 3 satellite data for the years 2019 and 2020. Afterward, the maximum and average SUHI, and the complementary indexes were calculated, such as the Urban Thermal Field Variation Index (UTFVI) and the Thermal Discomfort Index (TDI) for the urban areas and their surrounding areas. The Maximum and Average SUHI, obtained values between 1.85 and 8.25 and -4.92 and 2.59 degree difference, respectively, proving the SUHI existence in the study areas. The UTFVI, with values between 0.010 and 0.040, expresses how bad the eco-environmental spaces of urban are. The TDI, with values between 24.61 and 28.89 ºC, expresses the population’s thermal comfort. Therefore, this study provides a better understanding of the surface UHI pioneeringly for the Brazilian Northeast Region.

Research has shown that innovativeness is a key factor leading to company performance. However, the business environment can play a detrimental effect on company performance by undermining the company’s internal strategic efforts in terms of innovativeness. To test this, 344 questionnaires were sent to manufacturing companies owners and managers. 178 of them were returned and usable to test the study hypotheses. Though a hierarchical regression analysis, it was found that innovativeness has positive and significant effect on company performance, but business environmental dynamism has a negative and significant effect in innovativeness-company performance relationship. Recommendations and other research perspectives are suggested

The assessment of an organization/product's environmental footprint is based on the protocols developed by the Joint Research Centre of the European Union, which take into account 16 impact categories. Among the categories covered are toxicity to freshwater ecosystems and to humans. Standard protocols use only chemical parameters as input data, preventing the true impact of entire complex mixtures, such as emissions discharged into the environment, from being determined. Biological assays allow us to bridge this gap: in the current study, assays were used to determine baseline toxicity towards aquatic organisms (green algae, luminescent bacteria, and crustaceans) as well as specific toxicity (mutagenicity and carcinogenicity). Expected impacts were compared using two approaches (standard and bioassay-centered results obtained are not always in line and, in general, the traditional method underestimates impacts). This demonstrates the importance of these assays and suggests that they be used in LCA (Life Cycle Assessment) protocols as well.

E-petitioning is a useful object of study for observing the potential emergence of a new relationship to politics and new forms of political participation. Access to a dataset of hundreds of thousands of users of an electronic petitioning platform, provides the opportunity to overcome a certain number of limitations that are associated with traditional methods of studying political participation, since it allows us to focus on the reality of the signatories’ behaviour rather than on their declarations. We follow the traces left by the petitioners on this site to better understand the process of dissemination of an online petition, and its linked with offline activities. Our examination of the three most signed petitions in the ‘environment’ category, combining an analysis of their petitioning dynamics and an analysis of the comments attached to them, allows us to show: firstly, that there is an interwoven relationship between the local anchoring of the mobilisation and the processes of dissemination by which petitions extend from local signatories to signatories who are geographically more distant; and secondly, that it is not accurate to imagine that just anyone can sign any petition, since petitioning dynamics proceed from one person to the next, whether these dynamics start from a pre-existing local anchorage on the ground, or act through a platform effect which is dependent on the attractiveness of the petition in question.

The total amount of greenhouse gas emissions directly or indirectly generated by thermal power enterprises at any given time can be offset through afforestation, energy conservation and emission reduction. The present situation and control methods of CO₂ emission in China's coal-fired thermal power industry are introduced. The complex ecosystem is a unity of ecological functions composed of human society, economic activities and natural conditions. In the context of carbon neutrality and based on the theory of composite ecosystem, this paper divides the coal-fired thermal power plants in China into environmental management zones, calculates the atmospheric environmental capacity, and puts forward the concept of regional atmospheric environmental capacity, classification and zoning control. Finally, the management and control units are classified, and differentiated management and control requirements are put forward to provide a reference for regional air quality standard planning.

This study evaluated the use of filtration and UV-A photocatalysis for the reduction of particulate matter (PM) and airborne bacterial pathogens in swine barns. Two MERV filters (8 and 15) were used to mitigate PM concentrations measured at the PM 1, PM 2.5, respirable PM, and PM 10 ranges. Filtration was also used to generate different levels of airborne pathogens to be treated by UV-A. Results show that MERV 8 and 15 filters effectively reduced PM concentrations (96-98%) in air exhausted from a swine barn (p ranged from < 0.01 to 0.04). UV-A photocatalysis did not mitigate PM concentrations. UV-A photocatalysis treatment reduced measured colony-forming units (CFUs) by 15-95%. The CFU percent reduction was higher when airborne PM concentration was low. The numeric results suggested a real mitigation effect despite p-values that did not meet the usual statistical cut-off of <0.05 for significance due to the large variability of the CFU control samples. Normalization of measured airborne pathogen concentrations by smaller PM size range concentrations led to emerging significant treatment differences for CFUs. A significant decrease (~60% reduction; p < 0.03) in the concentration of viable airborne bacteria was shown for all PM below the 10-micron range.

This study aimed to examine the trends in the prevalence of overweight and obesity and to determine the associated socioeconomic and household environmental factors among women in Nepal. Using nationally representative data from the 1996, 2001, 2006, 2011 and 2016 cross-sectional Nepal Demographic and Health Surveys (NDHSs) (n = 33,507), the prevalence of overweight–obesity (body mass index (BMI) ≥ 25 kg/m2) and obesity (BMI ≥ 30 kg/m2) among women aged 15–49 years were examined. From the latest NDHS 2016, non-pregnant women with recorded anthropometric measurements (n = 6165) were included in the final analyses. Multivariate logistic regression models were used to determine the socioeconomic and household environmental factors associated with BMI ≥ 25 and BMI ≥ 30. Between 1996 and 2016, the prevalence of overweight–obesity increased from 1.8% to 19.7%, while the prevalence of obesity increased from 0.2% to 4.1%. Age, marital status, wealth index, province of residence, cooking fuel, refrigerator, and bicycle were significantly associated with having both overweight–obesity and obesity. Similarly, educational status, religion, type of toilet facility, television, and mobile phone were significantly associated with having overweight–obesity. Given the alarming increase in the prevalence of overweight and obesity among Nepalese women, there is an urgent need of interventions addressing these critical socioeconomic and household environmental factors.

The experience gained over the last hundred years clearly indicates that two groups of viruses represent the main risk for the development of highly transmissible epidemics and pandemics in the human species: influenza viruses and coronaviruses (CoV). Although the search for viruses with pandemic potential in the environment may have an important predictive and monitoring role, it is still based on empirical methodologies, mostly translated from the clinic and not fully validated for environmental matrices.As far as the SARS-CoV-2 pandemic, currently underway, is concerned, environmental monitoring activities aiming at checking the presence of SARS-CoV-2 in wastewater can be extremely useful to predict and control the diffusion of the disease. For this reason, the present study aims to evaluate the SARS-CoV-2 diffusion by means of a wastewater-based environmental monitoring developed in Piedmont, N-W Italy, during the pandemic second and third waves. Sampling strategies, sampling points, sample pre-treatments and analytical methods have been developed and validated to give representative and reliable results. The outcomes highlighted by the present paper demonstrate a strong correlation between SARS-CoV-2 concentration in untreated wastewater and epidemic evolution in the considered areas as well as a predictive potential that could provide decision-makers with indications for establishing effective policies to mitigate the effects of the ongoing pandemic and to prepare response plans for future pandemics that could certainly arise in the decades to come.Moreover, the study highlights the potential of wastewater treatment plants to degrade the genetic material referable to SARS-CoV-2 as well.In conclusion, the preliminary data reported in the present paper, although they need to be complemented by further studies considering other geographical regions as well, are very promising.

In response to droughts, various media campaigns and water saving instructions are released, often however, with only temporary water conservation effects. A promising development is this regard are Digital Water Meters (DWM) that provide near real-time water-use feedback. Despite extensive DWM experience in some water-stressed regions, a profound understanding of the initial attitude towards DWM and message tailoring opportunities are rarely empirically explored. Therefore, we aim to obtain insights into the attitude towards the introduction of DWM and explore opportunities for message tailoring, a topic of extra relevance as we may be on the threshold of a large-scale implementation in many world regions. Messages tailored to (i) normative beliefs and attitudes on drinking water, (ii) water-use activity and (iii) phase of decision-making, seem particularly compatible with DWM. Through a survey (n=1037) in the Netherlands, we observe that 93% of respondents have no objections utility investments in DWM and that 78% would accept a free DWM because of improved leakage detection, lower costs and environmental considerations. Finally, instead of sociodemographic factors, we observed that an attitude-based customer segmentation approach proved an especially useful predictor of respondent’s motivation to endorse DWM and forms a promising basis for water conservation message-tailoring strategies.

The social confinement resulting from the COVID-19 crisis temporarily reduced greenhouse gas emissions. Although experts consider that the decrease in pollution rates was not drastic, some surveys detect a growth in social concern about the climate. In this new climate-conscious environment, municipalities and local governments are promoting a new way of living and caring for cities, even before they can regain national and international freedom of movement. This work analyzes the connection between the new climate awareness arising from the COVID-19 crisis, the proposals of sustainable citizenship around the world, and its communication on Twitter to educate the new eco-conscious audience. The methodology mixes quantitative and qualitative analysis, using the Twitonomy Premium tool and the Twitter research tool, with data extracted at the end of December 2020. Among the top 10 most influential and active accounts, the results show educational institutions, local institutions, companies, neighborhood, associations, and influencers. The impossibility of living the city, has not prevented citizen education and commitment to make real change for when that city and its citizens return to normality. Although this new normality must be different: more ecological, more responsible, more sustainable and practiced from early childhood.

Livestock production systems generate nuisance odor and gaseous emissions affecting local communities and regional air quality. Also, there are concerns about the occupational health and safety of farm workers. Proven mitigation technologies that are consistent with the socio-economic challenges of animal farming are needed. We have been scaling up the photocatalytic treatment of emissions from lab-scale, aiming at farm-scale readiness. In this paper, we present the design, testing, and commissioning of a mobile laboratory for on-farm research and demonstration of performance in real farm conditions. The mobile lab is capable of treating up to 1.2 m3·s-1 of air with TiO2-based photocatalysis and adjustable UV-A dose based on LED lamps. We summarize the main technical requirements, constraints, approach, and performance metrics for the mobile laboratory, such as the effectiveness (measured as the percent reduction) and cost of photocatalytic treatment of air. The commissioning of all systems with standard gases resulted in ~9% and 34% reduction of NH3 and butan-1-ol, respectively. We demonstrated that as the percent reduction of standard gases increased with increased light intensity and treatment time. These results show that the mobile laboratory was ready for on-farm deployment and evaluating the effectiveness of UV treatment.

Failaka Island, located in the far east of Kuwait Bay, is about 20 km from the State of Kuwait’s coast, and represents a focal point for regional geography and history, with pristine beaches and archaeological sites dating to the Bronze, Iron, Hellenistic, Christian and Islamic periods. According to environmental data and in coordination with local authorities to develop an urban plan, the island is set to become the first tourist destination for the State of Kuwait. To achieve the Vision of Kuwait 2035, one of the planning objectives focuses around Urban Planning for the Establishment of Environmental Cities that Achieve (UPEECA) environmental sustainability criteria. The paper then, aims to propose the environmental urban plan for Failaka Island. Based around Environmental Analytical Hierarchical Processes (EAHP), and using the Field Calculator and ModelBuilder functions in ArcGIS, this research centres on the feasibility of carrying out an urban plan using suitability modelling that includes four factors and 13 criteria covering the island’s ecological and human composition. This study utilizes both remote sensing (UAVs for 3D imaging) and field study (ground truthing) to identify changes in land use and land cover – such as using sample analysis of the historical sites and soils for tracing evidence and creating/updating a soil map – and create the first GIS database for the island that can lead to generating a suitability model.

What is the function of cognition? On one influential account, cognition evolved to co-ordinate behaviour with environmental change or complexity (Godfrey-Smith 1996). Liberal interpretations of this view ascribe cognition to an extraordinarily broad set of biological systems – even bacteria, which modulate their activity in response to salient external cues, would seem to qualify as cognitive agents. However, equating cognition with adaptive flexibility per se glosses over important distinctions in the way biological organisms deal with environmental complexity. Drawing on contemporary advances in theoretical biology and computational neuroscience, we cash these distinctions out in terms of different kinds of generative models, and the representational and uncertainty-resolving capacities they afford. This analysis leads us to propose a formal criterion for delineating cognition from other, more pervasive forms of adaptive plasticity. On this view, biological cognition is rooted in a particular kind of functional organisation; namely, that which enables the agent to detach from the present and engage in counterfactual (active) inference.

Syanyonja village in the gold district of Busia, South East of the Republic of Uganda contain geologically epigenetic gold quartz vein deposits in carbonate-altered mafic metavolcanic rocks, deposited as quartz reefs in mineralized shear zones. In supracrustal rocks, alluvial gold is obtained from weathered auriferous quartz veins, which are of late orogenic granitic activity. The Syanyonja gold deposits have long been subjected to artisanal and small-scale gold mining (ASGM) by the locals for livelihood. This study determined the amount of mercury discharged with tailings into Namukombe stream, a major water body in Syanyonja village and investigated the impacts of ASGM on the mining population and the environment. Quantitation of mercury discharged with tailings was done by mass balance method. Field survey at the mining sites was done followed by administration of questionnaires to 50 stampeders in the village. The study indicates that about 8% of mercury mixed with auriferous materials are lost in tailings, accounting for an annual mercury release of about 1.757 kg into the environment. Socio-demographic results indicate that the majority of the mining population (64%) are male and ASGM have left health and environmental footprints, which directly or indirectly affects the population. The most common health problems among miners are malaria (36%) and abdominal pain (20%). The standard of living of the miners are evidently low, and most mines are characterized by school dropouts, prostitutes and thieves. Mining sites have deplorably poor hygiene, with evident burning of amalgams to recover gold. ASGM have been accompanied by wanton mowing down of vegetation, land degradation as well as mercuric pollution of water, air, land and aquatic ecosystems. It is suggested that the Ugandan government should re-enforce committees to follow up on ASGM activities, train artisans on sustainable gold mining using borax, magnets, sluice boxes as well as take up farming actively as an alternative.

Remote sensing technologies may play a fundamental role in the environmental assessment of open-cast mining and the accurate quantification of mine land rehabilitation efforts. Here, we developed a systematic geographic object-based image analysis (GEOBIA) approach to map the amount of revegetated area and to quantify the land-use changes in open-cast mines in the Carajás region situated in the eastern Amazon. Based on high-resolution satellite images from 2011 to 2015 from different sensors (GeoEye, WorldView-3 and Ikonos), we quantified forests, cangas (natural metalliferous savanna ecosystems), mine land, revegetated areas and water bodies. Based on the GEOBIA approach, threshold values were established to discriminate land cover classes using spectral bands, and the NDVI and NDWI indices and LiDAR digital ground and slope models. The overall accuracy was higher than 90%, and the Kappa indices varied between 0.82 and 0.88. During the observation period, the mining complex expanded; for that, canga and forest vegetation was converted to mine land. At the same time, the amount of revegetated area increased. Thus, we conclude that our approach is capable of providing consistent information regarding land cover changes in mines, with a special focus on the amount of revegetation necessary to fulfill environmental liabilities.

Disruption of epigenetic regulation by environmental toxins is an emerging point of focus for understanding the latter’s impact on human health. Polybrominated diphenyl ethers (PBDEs), one such toxin, are an environmentally pervasive class of brominated flame retardants that have been extensively used as coatings on a wide range of consumer products. Their environmental stability, propensity for bioaccumulation, and known links to adverse health effects have evoked extensive research to characterize underlying biological mechanisms of toxicity. Of particular concern is the growing body of evidence correlating human exposure levels to behavioral deficits related to neurodevelopmental disorders. The developing nervous system is particularly sensitive to influence by environmental signals, including dysregulation by toxins. Several major modes of actions have been identified, but a clear understanding of how observed effects relate to negative impacts on human health has not been established. Here we review the growing body of evidence for epigenetic disruptions induced by PBDEs, including DNA methylation, chromatin dynamics, and non-coding RNA expression while discussing potential relationship between PBDEs and neurodevelopmental disorders.

The exploitation of lipid membranes in biosensors has provided the ability to reconstitute a considerable part of their functionality to detect trace of food toxicants and environmental pollutants. Nanotechnology enabled sensor miniaturization and extended the range of biological moieties that could be immobilized within a lipid bilayer device. This chapter reviews recent progress in biosensor technologies based on lipid membranes suitable for environmental applications and food quality monitoring. Numerous biosensing applications are presented, putting emphasis on novel systems, new sensing techniques and nanotechnology-based transduction schemes. The range of analytes that can be currently detected include, insecticides, pesticides, herbicides, metals, toxins, antibiotics, microorganisms, hormones, dioxins, etc. Technology limitations and future prospects are discussed, focused on the evaluation/ validation and eventually commercialization of the proposed sensors.

Agricultural product like cassava produces huge amounts of waste when processed to consumable goods. The waste generated is generally considered to contribute largely to environmental pollution. This study therefore investigates the waste management practice that is adopted by cassava processors in Ogun State, Nigeria. Five (5) Local Government Areas (LGAs) dominant in processing cassava were selected for the study on the basis of spatial location distribution; landmass and population. The survey involved the use of structured questionnaires administered to cassava processors of the selected LGAs. The Statistical Package for Social Sciences (SPSS) software application and descriptive statistics were used for data analysis. Results of the analysis show that majority (70%) of the cassava processors are females. Cassava peel constitutes 10% of the waste produced, of which 91% are heaped at refuse dump in most communities. Results also reveal that 86.3% of cassava residues are used for animal feeds. Other findings show that the peels when dried are used as bio-fuel for cooking and there is a significant potential for biogas production. From the data captured from respondent during the study, most processors are willing to pay for an improved waste management system. The study therefore suggests proper waste management of cassava waste to minimize environmental pollution.

The exploitation of lipid membranes in biosensors has provided the ability to reconstitute a considerable part of their functionality to detect trace of food toxicants and environmental pollutants. Nanotechnology enabled sensor miniaturization and extended the range of biological moieties that could be immobilized within a lipid bilayer device. This chapter reviews recent progress in biosensor technologies based on lipid membranes suitable for environmental applications and food quality monitoring. Numerous biosensing applications are presented, putting emphasis on novel systems, new sensing techniques and nanotechnology-based transduction schemes. The range of analytes that can be currently detected include, insecticides, pesticides, herbicides, metals, toxins, antibiotics, microorganisms, hormones, dioxins, etc. Technology limitations and future prospects are discussed, focused on the evaluation/ validation and eventually commercialization of the proposed sensors.

The Anthropocene has emerged as the dominant conceptualization of the current geological epoch and, more significantly, of Humanity’s relation to nature. By its proponents the Anthropocene is espoused as a “solution formulation,” an analytical tool which clarifies Humanity’s multifarious impacts on nature and nature’s subsequent crises; and further as a conceptual apparatus from which to launch mitigation and adaption strategies, promising deliverance from or at least engagement with ecological crises. However, the Anthropocene is not a neutral concept, merely illuminating transition within ecological conditions and connections between human activities and nature; rather, it is a particular prism from which to understand humanity’s relation to nature. And, as the Anthropocene becomes ascendant both analytically and politically, it becomes vital to question its imaginary, how it constructs nature and Humanity, how it influences and constrains responses to ecological crises, and what the long-term implications of operating within this imaginary are. I argue that the Anthropocene as a political/analytical prism rests upon flawed conceptions of nature, history, and humanity, rending it an impotent construct from which to respond to ecological crises; offering only partial and presumptive “solutions” in the form of intensified governmental regulation and the application of manifold technological “fixes” through the geoengineering of Earth’s systems, in an attempt to address isolated aspects of ecological destruction.

Environmental monitoring plays a central role in diagnosing climate and management impacts on natural and agricultural systems, enhancing the understanding hydrological processes, optimizing the allocation and distribution of water resources, and assessing, forecasting and even preventing natural disasters. Nowadays, most monitoring and data collection systems are based upon a combination of ground-based measurements, manned airborne sensors or satellite observations. These data are utilized in describing both small and large scale processes, but have spatiotemporal constraints inherent to each respective collection system. Bridging the unique spatial and temporal divides that limit current monitoring platforms is key to improving our understanding of environmental systems. In this context, Unmanned Aerial Systems (UAS) have considerable potential to radically evolve environmental monitoring. UAS-mounted sensors offer an extraordinary opportunity to bridge the existing gap between field observations and traditional air- and space-borne remote sensing, by providing not just high spatial detail over relatively large areas in a cost-effective way, but as importantly providing an entirely new capacity for enhanced temporal retrieval. As well as showcasing recent advances in the field, there is also a need to identify and understand the potential limitations of UAS technology. For these platforms to reach their monitoring potential, a wide spectrum of unresolved issues and applications specific challenges require focused community attention. Indeed, to leverage the full potential of UAS-based approaches, sensing technologies, measurement protocols, post-processing techniques, retrieval algorithms and evaluations techniques need to be harmonized. The aim of this paper is to provide a comprehensive general overview of the existing research on studies and applications of UAS in environmental monitoring in order to suggest users and researchers on future research directions, applications, developments and challenges.

Solving environmental odor issues can be confounded by many analytical, technological, and socioeconomic factors. Considerable know-how and technologies can fail to properly identify odorants responsible for the downwind nuisance odor and mitigate it for the affected citizenry. We propose enabling solutions to environmental odor issues by utilizing troubleshooting techniques developed for the food, beverage, and consumer products industries. We showed that the downwind odorant impact-priority ranking process can be definable and relatively simple. The initial challenge is the prioritization of environmental odor character from the perspective of the impacted citizenry downwind. In this research, we aim at summarizing three natural models of the rolling unmasking effect (RUE) and discuss them more systematically in the context of the proposed downwind environmental odor prioritization approach. Regardless of the size and reach of an odor source, a simplification of odor character and composition typically develops with downwind dilution. The extreme odor simplification-upon-dilution was demonstrated for two plant varieties, prairie verbena and Virginia pepperweed. Their downwind odor frontal boundaries were dominated by single, character-defining odorants; p-cresol-dominated ‘barnyard’ odor, and benzyl mercaptan-dominated ‘burnt match’ odor, respectively. The P.T. porcupine downwind odor frontal boundary was dominated by two potent, character-defining odorants: (1) ‘onion’/‘body odor’ odorant #1 and (2) ‘onion’/‘grilled’ odorant #2. In contrast with their downwind boundary simplicities, each odor source presented considerable compositional complexity and composite character difference near the source. The proposed RUE approach’s ultimate significance is the illustration of naturally occurring phenomena that explain why some environmental odors and their sources can be challenging to identify and mitigate using the analytical only approach (focused on compound identities and concentrations). These approaches rarely move beyond comprehensive lists of compounds being emitted by the source.