Numerous elements, such as the composition and characteristics of carbon nanomaterials, the composition and characteristics of the matrix material, moisture levels, temperature, and loading circumstances, influence the piezoresistive behaviour of self-sensing cementitious composites. While some past research has explored the impact of some of these factors on the performance of self-sensing cementitious composites, additional investigations need to be conducted to delve into how loading conditions affect the sensitivity of self-sensing cement-stabilized composites. Therefore, this study explores the influences of various loading conditions (i.e., location of loading regarding the location of recording electrodes, and loading level) on the electromechanical performance of self-sensing cement-stabilized sand. To this end, firstly, the evaluation of the percolation threshold based on 10% cement-stabilized sand specimens containing various multiwall carbon nanotubes (MWCNTs) and graphene nanoplatelets (GNPs) was performed. Then, 10% cement-stabilized sand containing 4% MWCNTs/GNPs was tested under various cyclic compressive stresses. The results suggested that the distance between the loading area and the electrode location used for recording the electrical resistance significantly impacts the sensitivity of cement-stabilized sand. Optimal sensitivity was achieved when the electrodes were positioned directly beneath the loading area. Moreover, the study yielded that the stress sensitivity of self-sensing cement-stabilized sand increases proportionally with the stress level. Examination through scanning electron microscopy (SEM) demonstrated that the loading condition influences the bridging characteristics of carbon nanomaterials in cement-stabilized sand, leading to diverse electromechanical behaviors based on the loading condition. This study underscores the importance of considering specific parameters when designing the application of self-sensing cement-stabilized sand for practical field use.

Background: Breast cancer remains a significant health concern among women globally. Despite advancements in awareness and diagnostic techniques, it persists as a leading cause of death, with profound impacts on affected individuals' quality of life. Primary and secondary prevention, including regular screenings and practices like Breast Self-Examination (BSE), are pivotal in ensuring early diagnosis. The NHS in Italy offers screenings for women aged 50-69 every two years, managed by the Local Health Authority. However, the participation rates, especially among the Chinese female population residing in Italy, are not well-understood. Methods: Using a snowball method, we electronically disseminated a survey to investigate how Chinese women living in Italy engage with available NHS screening programs. The survey also explores their practice of BSE, the use and impact of technological tools on prevention, and aims to understand their depth of knowledge and misconceptions about breast cancer. Results: The data revealed a significant gap in breast cancer screening adherence and knowledge among Chinese women in Italy, with a notable discrepancy between the general population and those who have previously encountered cancer. Conclusions: The results highlight the urgent need for interventions that are culturally sensitive, stressing that these actions are not only desirable but essential.

(1) Background: Mindfulness-based interventions (MBIs) have shown interesting preliminary ef-fects over self-regulation processes in early adolescence. However, interventions usually integrate various types of practices with no clarity about the specific effect of each of them over attentional, emotional, and behavioral regulation. The objective of this research was to evaluate the effect of two MBIs, one focused on classic attentional practices and another one focused on the recognition and expression of emotions, over attentional, emotional, and behavioral self-regulation in early adolescents. (2) Method: An experimental method was carried out. A sample of 70 children be-tween 8 and 12 years old were randomized and assigned to three experimental conditions: 1) MBI with a focus on attentional practices, 2) MBI with a focus on recognition and expression of emotions, 3) control group, waiting list. The programs lasted 8 weeks, with a weekly 1-hour online synchronic session, plus home practices. Children were evaluated before starting the in-tervention and at the end of the 8-week program. The assessed variables were: 1) Mindfulness; 2) Emotional Regulation; 3) Attentional Regulation and 4) Behavioral regulation. (3) Results: Chil-dren that participated in both programs, increased their mindfulness and emotional and be-havioral regulation scores. Only children who participated in the program with a focus on at-tention showed significant changes in their ability to self-regulate attention. (4) Conclusions: online MBIs, with attention to external and internal stimuli practices, can be a good strategy to strengthen self-regulation skills of attention, emotions, and behavior in early adolescence.

Most of the educational interventions proposed so far in the field of mental well-being in education ‎usually address just students. In this study, we focused on teachers as the Covid-19 pandemic reiterated ‎the importance of their mental well-being during demanding times. We investigated whether ‎neurofeedback (NF) training can increase optimism, self-esteem, life satisfaction, and the ability to ‎cope with stressful events, reflecting on the research literature that emphasizes these four factors, ‎which affect the ability to be confident in dealing with uncertainty and distress. ‎ Forty teachers aged 35-55 participated in the study. The test group took part in 12 NF training sessions, ‎and the control group was not treated. Our findings indicate that compared to the control group, ‎measures of optimism, self-esteem, life satisfaction, and coping with stressful events improved ‎significantly in the test group.‎ To the best of our knowledge, this is the first attempt to test a mental welfare intervention program for ‎teachers through NF. This study responded to a call to develop teacher intervention programs using ‎physiological measurement and technological innovations to improve their mental health and allow ‎them to cope better with stressful teaching conditions.

Spiritual security should be a priority in our modern globalized society. Therefore, the study provides convincing evidence that it is important to develop a theoretical understanding of spiritual security. Several theoretical concerns regarding the establishment and maintenance of spiritual security are addressed in the article. He explores many ideas that are interrelated, including spiritual security, worldview, and spirituality. To ensure spiritual security, a practical analysis is carried out of the need to carry out various measures that strengthen the spiritual health of society.The article explains the methodology used in spiritual Security Investigations. According to the author, different levels of spiritual security can be analyzed using a structural-logical model and a dialectical method of cognition. Comparative analysis is also seen as a valuable tool. Spiritual intelligence is essential to overcome barriers, manage change, and ensure personal security and its impact on relationships. The process begins with introspection and evaluation, concluding with the ability to assess and understand the environment. By analyzing and understanding natural phenomena, it is possible to develop a sense of reality and a deeper appreciation of the nature of human existence. A person can feel spiritually safe if he adheres to his moral and spiritual beliefs and complies with the norms of society. It contains such things as worldview, social behavior, culture, research and social development. By expanding the spiritual point of view, the danger to the spiritual security of a person can be reduced.

This paper introduces an innovative nanotechnology-based approach that provides a pathway to enhance the energy release efficiency of nanoenergetic materials (nEMs) by harnessing self-synchronized collective atomic vibrations and phonon wave resonance within the transition domains between nanocomponents, without altering the material composition. The key innovation involves incorporating finely-tuned 2D-ordered linear-chain carbon-based multilayer nano-enhanced interfaces as programmable nanodevices into the transition domains using advanced multistage processing and assembly techniques. These programmable nanodevices enable precise control over self-synchronized collective atomic vibrations and phonon wave propagation, leading to synergistic effects. To activate and optimize these effects, a combination of various methods is employed, including energy-driven initiation of allotropic phase transformations, surface acoustic wave-assisted micro/nano-manipulation, heteroatom doping, directed self-assembly using high-frequency electromagnetic fields, and data-driven inverse design approaches. By leveraging a data-driven inverse design strategy and uncovering hidden structure-property relationships, we maximize energy release efficiency using the carbon nano-materials genome approach derived from multifactorial neural network-based predictive models. This approach not only unlocks new functionalities in nEMs but also improves environmental performance and safety levels. By pioneering transformative pathways for nEMs through harnessing phonon wave resonance in low-dimensional nanocarbon transition interfaces, this research brings significant advancements in the field.

Homochirality is an obvious feature of life on Earth. On the other hand, extraterrestrial samples contain largely racemic compounds. The same is true for any common organic synthesis. Therefore, it has been a perplexing puzzle for decades how these racemates could have formed enantiomerically enriched fractions as a basis for the origin of homochiral life forms. Numerous hypotheses have been put forward as to how preferentially homochiral molecules could have formed and accumulated on Earth. In this article, it is shown that homochirality of the abiotic organic pool at the time of formation of the first self-replicating molecules is not necessary and not even probable. It is proposed to abandon the notion of a molecular ensemble and to focus on the level of individual molecules. Although the formation of the first self-replicating, most likely homochiral molecule is a seemingly improbable event, on a closer look, it is almost inevitable that homochiral molecules have formed simply on a statistical basis. In this case, the non-selective leap to homochirality would be one of the first steps in chemical evolution directly out of a racemic “ocean”. Moreover, most studies focus on the chirality of the primordial monomers with respect to an asymmetric carbon atom. However, any polymer with a minimal size that allows folding to a secondary structure, would spontaneously lead to asymmetric higher structures (conformations). Most of the functions of these polymers would be influenced by this inherently asymmetric folding. To summarize, simple and universal mechanisms may have led to homochiral self-replicating systems in the context of chemical evolution. A homochiral monomer pool is deemed unnecessary and probably never existed on primordial Earth.

Existing studies often lack a systematic solution for Unmanned Aerial Vehicles (UAV) inspection system, which hinders their widespread application in crack detection. To enhance its practicality, this study proposes a formal and systematic framework for UAV inspection systems, specifically designed for automatic crack detection and pavement distress evaluation. The framework integrates UAV data acquisition, deep learning based crack identification, and road damage assessment in a comprehensive and orderly manner. Firstly, the flight control strategy is presented, and road crack data is collected using the DJI Mini 2 UAV imagery, establishing a high-quality UAV crack image datasets with ground truth information. Secondly, a validation and comparison study is conducted to enhance the automatic crack detection capability and provide an appropriate deployment scheme for UAV inspection systems. This study develops automatic crack detection models based on mainstream deep learning algorithms(namely, Faster-RCNN, YOLOv5s, YOLOv7-tiny, and YOLOv8s) in urban road scenarios. The results demonstrate that the Faster-RCNN algorithm achieves the highest accuracy and is suitable for online data collection of UAV and offline inspection at work stations. Meanwhile, the YOLO models, while slightly lower in accuracy, are the fastest algorithm and are suitable for lightweight deployment of UAV with online collection and real-time inspection. Quantitative measurement methods for road cracks are presented to assess road damage, which will enhance the application of UAV inspection systems and provide factual evidence for maintenance decisions made by road authorities.

The demand for precise indoor localization services is steadily increasing. Among various methods, fingerprint-based indoor localization has become a popular choice due to its exceptional accuracy, cost-effectiveness, and ease of implementation. However, its performance degrades significantly as a result of multipath signal attenuation and environmental changes. In this paper, we propose an indoor localization method based on fingerprints using self-attention and long short-term memory (LSTM). By integrating a self-attention mechanism and LSTM network, the proposed method exhibits outstanding positioning accuracy and robustness in diverse experimental environments. The performance of the proposed method is evaluated under two different experimental scenarios, which involve 2D and 3D moving trajectories, respectively. The experimental results demonstrate that our approach achieves an average localization error of 1.76 m and 2.83 m in the respective scenarios, outperforming the existing state-of-the-art methods by 42.67% and 31.64%.

With the development of artificial intelligence, the ability of capturing the background characteristics of hyperspectral imagery (HSI) is improved and promising performance in hyperspectral anomaly detection (HAD) tasks is yielded. However, existing methods proposed in recent years still suffer from certain limitations: 1) constraints are lacking in the deep feature learning process in terms of the issue for absence of prior background and anomaly information. 2) hyperspectral anomaly detectors with traditional self-supervised deep learning methods fail to ensure prioritized reconstruction of the background. 3) architectures of fully connected deep network in hyperspectral anomaly detectors lead to low utilization of spatial information and destruction for original spatial relationship of hyperspectral imagery, and disregard spectral correlation between adjacent pixels. 4) hypotheses or assumptions for background and anomaly distributions restrict the performance of many hyperspectral anomaly detectors because the distributions of background land covers are usually complex and not assumable in real-world hyperspectral imagery. With the consideration of above problems, in this paper, we propose a novel fully convolutional auto-encoder based on dual clustering and latent feature adversarial consistency (FCAE-DCAC) for HAD which is carried out in a self-supervised learning-based processing. Firstly, the density-based spatial clustering of applications with noise algorithm and connected component analysis are utilized for successive spectral and spatial clustering to obtain more precise prior background and anomaly information, which facilitates the separation between background and anomaly samples during the training of our method. Subsequently, a novel fully convolutional auto-encoder (FCAE) integrated with spatial-spectral joint attention (SSJA) is proposed to enhance the utilization of spatial information and augment feature expression. In addition, a latent feature adversarial consistency network is proposed to achieve pure background reconstruction with the ability of learning actual background distribution in hyperspectral imagery. Finally, a triplet loss is introduced to enhance the separability between background and anomaly, and the reconstruction residual serves as the anomaly detection result. We evaluate the proposed method on seven groups of real-world hyperspectral datasets, and the experimental results confirmed the effectiveness and superior performance of the proposed method versus nine state-of-the-art methods.

Аннотация . Периодически развиваются самоподобные движения структурно-вещественных комплексов (СМК) из состава Солнечной системы в течение периода около 4,5 миллиардов лет земной коры, развития Земли в условиях самоорганизации. Синхронные или близкие во времени ряды генетических или парагенетических групп магматических, рудно-минеральных, метасоматических, осадочных образований, их структур и других сопутствующих им процессов, включают в себя каждый комплекс (ГМК). Каждый комплекс в его пределах ограничен во времени и пространстве, по причине признаков самопроизвольного динамического процесса; распространяется на территорию Земли в текущий исторический период; формирует состав и структуру земной коры на этом этапе, определяя ее полициклическое развитие. Количество циклов около 14,

Using the h-index to assess individual researchers is not only unethical and unfair but also inaccurate and misleading. This index fails to offer a reliable measure of a researcher's impact based on their citation scores. Beyond statistical and conceptual considerations, authorship practices, especially in the case of multi-authored publications, give rise to significant problems that often go unnoticed. While some modifications of the h-index have been proposed to mitigate these weaknesses, the fundamental deficiencies persist. Most of these flaws have been effectively addressed by the c-score, a composite citation index. The c-score excludes self-citations, normalizes the number of citations by considering the number of authors in each paper, and takes into account first, single, and last authorship. This approach provides a more realistic measure of the impact of each individual researcher based on raw citations.

Aim: Utilizing the subjective experience of nurse executives who have supervised nurses during a major disaster in a hospital setting, this study aims to describe the subjective experience of nurse executives (NE) who have supervised nurses’ response to major disaster. This paper will focus on strategies to support nursing response to disaster, specifically to strengthen resiliency and the ability to maintain function despite the shock of disaster, including those caused by climate changes. Methods: Semi-structured interviews were conducted with 11 hospital-based nurse executives who supervised nurses during some of the worst natural and human-made disasters in different regions of the United States. A phenomenological approach was used to analyze and describe emerging themes from qualitative data. Results: Three Nurse Executives demonstrated theme saturation for mitigation steps to augment traditional disaster readiness activities: 1.) Assessment of Human Infrastructure: Daily Skills Needed During Disaster Response, 2.) Identification and Study of Failure Points & Metrics, 3.) Strengthening Human Infrastructure: Rectifying Deficiencies), and 4.) Monitoring Metrics & Making Corrections During Conventional Periods. Conclusion: Mitigation steps may improve outcomes in hospital function during conventional times; therefore, may improve resiliency and the ability to maintain functions during major disasters, including climate change.

This article delves into the complex tension between national self-rule and international involvement, in the context of global politics, examining the inherent challenges of upholding both principles when confronted with human rights abuses and the pursuit of global peace. The introduction presents the fundamental dilemma: self-governance versus moral obligations. The problem statement calls for a nuanced approach to address the intricate complexities of sovereignty and intervention, acknowledging the potential misuse by oppressive regimes and the ongoing challenges of determining when and how intervention is warranted. The article advocates for a more responsible and effective approach to global conflicts and human rights violations, balancing national sovereignty with judicious intervention when required. The methodology employs both literature review and case analysis to construct a framework for objectively assessing when international intervention is justified in instances of human rights abuses. The conclusion stresses the criticality of objective intervention criteria, transcending cultural, political, and economic biases, and advocates for a globally accepted approach that celebrates diversity while promoting global stability.

The article addresses the importance of nutrition in the health of the elderly population and focuses on the qualitative evaluation of menus provided by a social solidarity institution in Portugal, in order to prevent and/or treat malnutrition or the risk of malnutrition in this vulnerable population. The methodology involves the evaluation of four weekly menus, totalling 28 complete daily menus for the elderly, using the “Avaliação Qualitativa de Ementas para a População Idosa” (AQEDI) tool. The assessment grid is organized into six domains (general items, soup, protein suppliers, carbohydrate supplier side, vegetable side and dessert), each composed of various parameters. The results indicate that all menus were classified as "acceptable”, with percentages ranging from 60.73% to 68.84%, and suggests that while the menus are deemed acceptable, there is room for improvement. Recommendations include increasing the presence of eggs and including seasonal fruits daily, avoiding canned fruit. The study emphasizes the need for coordinated efforts within the institution to enhance menu planning, considering both nutritional guidelines and the sensory aspects of food. Coordination efforts within the institution are crucial for preserving positive aspects and addressing inadequacies in menu planning.

Brain-stimulation reward, also known as intracranial self-stimulation (ICSS), is a commonly used procedure for studying brain reward function and drug reward. In electrical ICSS, an electrode is surgically implanted into the medial forebrain bundle in the lateral hypothalamus or the ventral tegmental area in the midbrain. Operant lever responding leads to the delivery of electrical pulse stimulation. The alteration in the stimulation frequency-lever response curve is used to evaluate the impact of pharmacological agents on brain reward function. If a test drug induces a leftward or upward shift in the ICSS response curve, it implies a reward-enhancing or abuse-like effect. Conversely, if a drug causes a rightward or downward shift in the functional response curve, it suggests a reward-attenuating or aversive effect. A significant drawback of electrical ICSS is the lack of cellular selectivity in understanding the neural substrates underlying drug reward versus aversion. Excitingly, recent advancements in optical ICSS (oICSS) have facilitated the development of at least three cell type-specific oICSS models – dopamine-, glutamate-, and GABA-dependent oICSS. In these new models, a comparable frequency-rate response curve has been established and employed to study the substrate-specific mechanisms underlying brain reward function and a drug's rewarding versus aversive effects. In this review article, we summarize recent progress in this exciting research area. The findings in these new behavioral models have not only increased our understanding of the neural mechanisms underlying drug reward and addiction but have also introduced a novel experimental approach in preclinical medication development for treating substance use disorders.

We introduce a novel method for fabricating perovskite solar modules using selective spin-coating on various Au/ITO patterned substrates. These patterns were engineered for twofold purposes: (1) to enhance selectivity of monolayers primarily self-assembling on the Au electrode, and (2) to enable seamless interconnection between cells through direct contact of the top electrode and the hydrophobic Au connection electrode. Utilizing SAMs-treated Au/ITO, we achieved sequential selective deposition of the electron transport layer (ETL) and the perovskite layer on the hydrophilic amino-terminated ITO, while the hole transport layer (HTL) was deposited on the hydrophobic CH3-terminated Au connection electrodes. Importantly, our approach had negligible impact on the series resistance of the solar cells, as evidenced by the measured specific contact resistivity of the multilayers. A significant outcome was the production of a 6-cell series-connected solar module with a notable average PCE of 8.32%, providing a viable alternative to the conventional laser scribing technique.

Dementia education and training for workforce development is becoming increasingly important in bridging knowledge gaps among health and social care practitioners in the UK and internationally. Dementia Education for Workforce Excellence (DEWE) was developed during the COVID-19 pandemic blending both synchronous and asynchronous instruction and delivered across three different contexts: care homes, home care, and nurse education within the UK and India. This study aimed to evaluate DEWE using mixed methods with online survey data analyzed descriptively and interview data analyzed thematically. Integration of survey and interview data aimed toward a comprehensive evaluation of this novel approach for dementia workforce development. Thirty-four social care practitioners and nurse educators completed the online survey demonstrating high-level learner satisfaction; learning gains; behavioral change, and motivation to share new knowledge. Four key themes developed from the analysis of interviews (n=9) around participants’ pursuit of new knowledge; delivery modes in DEWE; learning gains and impact of DEWE; and adaptations for future program implementation. Findings suggest DEWE is an innovative resource that promotes person- and relationship-centered dementia care across all stages of one’s dementia journey. Cultural adaptations are recommended for international delivery to ensure contextual alignment and maximum impact.

In recent decades, considerable attention has been focused on the design and development of surfaces with defined or tunable properties for a wide range of applications and fields. To this end, self-assembled monolayers (SAMs) of organic compounds offer a unique and straightforward route of modifying and engineering the surface properties of any substrate. Thus, alkane-based self-assembled monolayers constitute one of the most extensively studied organic thin-film nanomaterials, which have found wide application in antifouling surfaces, control of wettability or cell adhesion, sensors, optical devices, corrosion protection, organic electronics, among many other applications. Some of which have led technological transfer to industry. Nevertheless, recently, aromatic-based SAMs have gained in importance as functional components, particularly in molecular electronics, bioelectronics, sensors, etc., due to their intrinsic electrical conductivity and optical properties, opening up new perspectives in these fields. However, some key issues affecting device performances still need to be lifted off to ensure their full use and access to novel functionalities such as memories, sensors, or active layers in optoelectronic devices. In this context, we will present herein recent advances of p-conjugated systems-based self-assembled monolayers (e.g., push-pull chromophores) as active layer and their applications.

The house cricket (Acheta domesticus L.) is one of four edible insect species introduced to the EU market as a novel food and alternative protein source. Innovative products, such as cricket flour, are increasingly appearing on supermarket shelves and can offer an alternative to traditional cereals, while providing the body with many valuable nutrients of comparable quality to those found in meat and fish. The aim of this study was to investigate the possibility of using cricket powder as a substitute for wheat flour in the production of bread. The physicochemical properties of cricket powder were evaluated in comparison to wheat flour, such as water and fat binding capacity, pH, water activity, colour, water content, protein, fat, fibre content and amino acid and fatty acid profile. As a result of the echnological studies, the composition of breads with 5%, 10% and 15% replacement of wheat flour by cricket flour was designed and their quality characteristics (physicochemical, sensory and microbiological) were evaluated. Cricket powder was character-ised by higher protein (63% vs. 13.5%) and fat (16.3% vs. 1.16%) content and a lower carbohydrate (9.8% vs. 66%) and fibre (7.8% vs. 9.5%) content as compared to wheat flour. The tested preparations had similar pH (6.9 and 6.8, respectively for cricket powder and flour), and fat-binding properties ( 0.14 vs. 0.27 g oil/g powder respectively for cricket powder and flour) but different water-binding properties and completely different color components. Despite the differences obtained in phys-icochemical properties for cricket powder and flour, most of the functional parameters obtained for bread with 5% cricket flour were not significantly different from the control sample. All breads had good microbiological quality after baking and during 7 days storage. The 10 and 15 per cent cricket flour treatments affected the darker colour of the breads and caused a significant increase in the hardness of the breads. In the overall sensory evaluation, the bread with 5% cricket flour did not differ significantly from the control bread, while the breads with higher levels of cricket flour had significantly lower overall scores compared to the control sample. In all cases, cricket flour in-creased the protein and fat content and decreased the carbohydrate content compared to the control sample. Considering nutritional properties such as high protein digestibility, breeding consid-erations, relatively low environmental impact and the possibility of intensive production in places where traditional agricultural production is not possible, insects seem to be the future of human nutrition.

Walnut (Juglans regia L.) is a monoecious species and although it exhibits self-compatibility, presents incomplete overlap of pollen shed and female receptivity. Thus, cross-pollination is prerequisite for optimal fruit production. Cross-pollination can occur naturally by the wind, the insects, artificially, or by hand. Pollen has been recognized as one possible pathway for Xanthomonas arboricola pv. juglandis infection, a pathogenic bacterium responsible for walnut blight disease. Other than the well-known cultural and chemical control practices, artificial pollination technologies with the use of drones could be a successful tool for walnut blight disease management of orchards. Drones may carry pollen and release it over crops or mimic the action of bees or other pollinators. Although this new pollination technology could be regarded as a promising tool, pollen germination and knowledge of pollen as a possible pathway for the dissemination of bacterial diseases remain crucial information for design and manufacture of aerial pollinator robot for walnut trees. Thus, our purpose was to describe a pollination model with fundamental components, the identification of the “core” pollen microbiota, specify an appropriate flower pollination algorithm, design an autonomous precision pollination robot, and minimize the average errors of flower pollination algorithm parameters through machine learning and meta-heuristic algorithms.

The aim of the study was to examine the influence of different irrigation protocols on the shear bond strength (SBS) of self-adhesive resin composite cement (SARC) to primed radicular dentin. Radicular dentin slabs (N=58) were sectioned from extracted intact third molars, embedded in acrylate, polished, and randomly assigned to five experimental groups (N=8-12) and one control group, CG (N=8). Irrigation solutions used were sodium hypochlorite (H), ethylene-diamine-tetra acetic acid (EDTA), etidronic acid with hypochlorite (HEDP), saline solution (SS), and chlorhexi-dine (CHX). Each experimental group underwent different irrigation protocol for two minutes: 1) H/EDTA/H, 2) HEDP, 3) H/EDTA/CHX, 4)H/EDTA/SS, and 5) HEDP/SS. The CG samples were not treated with any irrigation solution. After drying, adhesive enhancing primer (AEP) and du-al-curing SARC were applied to the radicular dentin using molds corresponding to the Ultra Tester. Specimens were stored at 37°C in distilled water and fractured in shear mode after 10 days. The results were analyzed using the ANOVA statistical test and Post-hoc Games-Howell test, α=0.05. CG exhibited the highest SBS. Except for HEDP and HEDP/SS, all experimental groups showed significantly lower SBS compared to the control group (p< 0.05). HEDP seems to be ad-equate solution for root canal cleaning before dentin priming and fiber post cementation with self-adhesive resin cement. Cleaning protocols with H, EDTA and CHX cause a significant de-crease in bond strength.

This study investigated whether reciprocal collaborative pedagogy significantly impacts Indonesian electrical engineering polytechnic students in reducing reading anxiety and improving self-efficacy in ESP reading comprehension skills. Fifty Polytechnic students were equally assigned to two groups. Control groups learned in the traditional reciprocal teaching method individually. Experimental group engaged in reciprocal collaborative pedagogy. Each group received a 6-week reading strategy training. E-learning platforms were used in this study as a complementary tool to distribute ESP reading materials, announcements, and the experiment details being taught. The quantitative and qualitative results demonstrated that the tasks in reciprocal collaborative pedagogy positively affects Indonesian electrical engineering polytechnic students' learning experience and outcomes. This pedagogy promotes a productive learning environment through peer interaction, active engagement, and peer group discussions of the whole learning activities, reducing feelings of anxiety and building confidence in ESP-specialized text.

This paper delves into the critical issue of concrete cracks, a common consequence of environmental factors and external forces, and their potential impact on the structural integrity of buildings. Recognizing the urgency of addressing this issue, the concept of self-healing concrete has emerged, aiming to revolutionize the construction industry by autonomously repairing cracks and minimizing the need for labor-intensive and time-consuming manual interventions. The paper employs a bibliographic analysis methodology to comprehensively explore the most significant technologies associated with self-healing concrete, identifying key research countries/regions and prominent research institutions in this field. Through an examination of scholarly articles, the analysis seeks to uncover key themes, technologies, and contributors within the self-healing concrete domain. Insights into the geographical distribution of research efforts and the roles of influential research institutions are provided, shedding light on collaborative networks and knowledge-sharing dynamics that drive innovation in this evolving field.

The feeling of emotional self-efficacy helps people understand how to handle positive and negative emotions. Emotion regulation indicates the process that helps modulate emotions, to adapt suitably to the demands of the environment. This study has a two-fold aim. Firstly, it analyses the relationships among emotion regulation; the personality traits of extraversion and emotional stability; and the feeling of efficacy of positive and negative emotions in an adolescent population. Secondly, it analyses the mediating role of personality traits (extraversion and emotional stability) in the relationship between emotion regulation and self-efficacy for positive and negative emotions. There were 703 adolescents who took part (49.9% male and 50.1% female) aged between 15 and 18 years (M=15.86, TD=0.30). The results observe the significant relationships among emotion regulation; the personality traits of extraversion and emotional stability; and self-efficacy for positive and negative emotions. The structural equation model confirms that the link between emotion regulation and self-efficacy is direct and is also mediated by the personality traits of extraversion and emotional stability. The study confirms that emotional self-efficacy beliefs are connected to the emotional regulation strategies used. Effective emotional regulation favours self-perception and emotional coping. There is a discussion about the results, which are connected to previous research.

"Enhancing the Efficiency of Natural Gas Liquid (NGL) Extraction and Fractionation Trains: An Integrated Approach of Simulation Analysis, Advanced Modifications, and Technological Advancements. Through comprehensive research, innovative solutions such as the heat pump aided distillation (HPAD) system and self-heat recuperation technology (SHRT) have been developed to significantly reduce the energy consumption associated with conventional distillation systems. To identify a practical system for NGL fractionation trains, this study extensively examined and compared various HPAD and SHRT options to retrofit a single column. The objective was to find the most suitable and efficient solution for the fractionation process of natural gas liquids (NGLs). The retrofit options analyzed in this study encompassed a range of techniques, including vapor compression (VC), mechanical vapor re-compression (MVR), thermal vapor re-compression (TVR), bottom flashing (BF), side heat exchanger (SHE), intermediate heating and cooling (IHC), self-heat recuperative (SHR), and modified self-heat recuperative (MSHR) distillation. These methods were carefully examined to determine their suitability and effectiveness in improving the performance of NGL fractionation trains In this study, a depropanizer column, typically employed in conventional NGL plants, was selected as a case study. The simulation software Aspen HYSYS V7.3 was employed to model and analyze eight retrofit designs based on predefined criteria. The simulation data was carefully evaluated to identify the most efficient design for minimizing energy consumption. Among the retrofit options, the mechanical vapor re-compression (MVR) technique demonstrated the most significant energy cost reduction, with a remarkable 68.11 percent improvement compared to the base case conventional column. These findings highlight the potential of MVR as an effective solution for lowering energy costs in NGL fractionation trainsFollowing the MVR retrofit option, the study found that vapor compression (VC) achieved a considerable energy cost reduction of 66.65 percent, closely followed by modified self-heat recuperative (MSHR) at 64.02 percent, bottom flashing (BF) at 62.88 percent, self-heat recuperative (SHR) at 55.85 percent, side heat exchanger (SHE) at 54.23 percent, intermediate heating and cooling (IHC) at 39.54 percent, and thermal vapor re-compression (TVR) also at 39.54 percent. These findings highlight the significant potential for energy savings offered by these retrofit options, with VC being the most popular choice, closely followed by MSHR, BF, SHR, SHE, IHC, and TVR.

This article introduces existential wellbeing (EWB) as one of the most ignored but also the most important kind of wellbeing, especially for people who experience life-limiting diseases and need palliative care (Wong & Yu, 2021). This article will not only review the literature regarding the nature and practice of existential wellbeing in palliative care, but also propose a preliminary Existential Wellbeing Scale. EWB is defined as the quality-of-life characterized by living well and dying well in spite of pain, obstacles, and the shadow of death; wellbeing within the context of human suffering can only be fully understood from the perspective of existential positive psychology (EPP), dedicated to the study of sustainable wellbeing based on the foundation of transcending suffering. The basic tenets of EPP are (1) redefining positivity or wellbeing in terms of seeing and being the light in the darkness; (2) focusing on the dialectical process of navigating an adaptive balance; and (3) re-orienting one’s life attitude from egotism to self-transcendence (Wong, 2023a). More specifically, EWB depends on some combination of the following experiences: (1) Prior experience of overcoming adversity; (2) Existential intelligence (Gardner, 2020) in addressing existential concerns; (3) Existential wisdom of the soul (Wong 2022a; Wong, Ho, et al, 2023a) to achieve existential wellbeing and sustainable flourishing; (4) Spiritual wellbeing based on spiritual values such as faith, hope, and love (Wong, 2023); (5) Knowledge of meaning-focused coping (Eisenbeck et al., 2021); and (6) The new paradigm of self-transcendence (Reed & Haugan, 2021; Wong, Arslan et al., 2021; Wong, Ho et al., 2023b) to transcend and transform suffering into wellbeing and triumph.

Background: This study aimed to examine the obesity¬ stress, weight control behavior, and self-control in overweight and obese female university students, and identify the mediating effect of self-control in the relationship between obesity stress and weight control behavior. Methods: This study employed a descriptive correlational design. A total of 109 female university students who were overweight and obese participated in the study. Data were analyzed using descriptive statistics, Pearson's correlation coefficient analysis, and Bootstrapping using Hayes' PROCESS macro for mediation. Results: Significant relationships between obesity stress and weight control behavior (r=0.25, p<0.001), obesity stress and self-control (r=-0.36, p<0.001), and weight control behavior and self-control (r=.26, p<.001) were observed. Self-control showed indirect mediating effect on the relationship between obesity stress and weight control behavior. Conclusion: Therefore, development of programs and strategies for improving self-control is necessary in order to decrease obesity among female university students.

This paper focuses on the impact that urban traffic has on the environment. The study characterizes the global effect of GHG emissions, including the ecologic evaluation and the characterization, normalization, and evaluation factor. The work makes a detailed survey of the different modes of driving and their influence on engine performance as one of the principal causes of gas emissions during the combustion process. The article analyzes six types of vehicles equipped with different engine configurations: diesel and gasoline, GLP and GNC, hybrid electric, and plug-in hybrid electric. Simulation of the driving mode under various operational conditions for every type of engine results in energy consumption, thus, in GHG emissions, carbon dioxide and monoxide, nitrogen oxides, and Sulphur dioxide. The study concludes that a reduction in vehicle speed, thus in the engine revolutions, has positive effects on engine combustion and gasses emissions, which is reduced by 27.5%. The study also concludes that the limitation in driving mode, avoiding sharp and sudden acceleration, may reduce up to 45% of GHG emissions. The changes applied in the driving mode improve the air quality in the urban environment, reducing the content of GHG from 39% to 61%.

The Gulf of Suez is a sedimentary rift-basin with thick evaporites and complex structural settings that presents challenges to achieving quality imaging based on seismic reflection data. Such subsurface settings and the lack of 3D seismic data poses challenges in building reservoir models to guide hydrocarbon exploration and development, especially in southern parts the Gulf of Suez. This study attempts to overcome the challenges of both 2D seismic interpretation and building a static reservoir model of two Miocene reservoir formations, Ras Ghara Field, Southern Gulf of Suez. Integration of well log data analysis of nine wells and regional-tectonics cognizant 2D seismic interpretation of nineteen 2D seismic lines enabled a reliable 3D static reservoir model. The Miocene reservoir characterization reveals heterogeneity in lithofacies distribution, with thick evaporite sequences causing seismic reflection distortions. Significant hydrocarbon accumulations are associated with horst fault blocks. The Miocene reservoirs demonstrate effective porosity of 14-33%, water saturation of 16-65%, and hydrocarbon saturation of 35-84%. Two new prospects are identified based on structure, facies distribution, and petrophysical results, with estimated original oil in place (OOIP) of 2,002,404 stock tank barrels (STB) and 1,175,580 STB for the Kareem Formation, and 6,302,916 STB and 2,841,894 STB for the Rudeis Formation.

As urbanization has accelerated, China has started to build smart cities, which have formed smart city clusters. It is critical to coordinate development within smart city clusters to enhance the efficiency of city cluster construction. From the perspective of demographic economics, this study innovatively constructed an evaluation system for the coordinated development of smart city clusters and utilized the coupled coordination degree model to conduct an in-depth study of smart city clusters in Jiangsu Province. The results show that there are clear differences in the development between the three regions of Jiangsu Province: Southern Jiangsu, Central Jiangsu, and Northern Jiangsu. The development within Jiangsu Province is imbalanced, where the overall development trend is high in the southern region and low in the northern region. The main driving factors include geography, the Matthew effect, game thinking, and industrial structure. Accordingly, the results suggest the following recommendations for the coordinated development of smart city clusters: strengthening cross-regional cooperation, promoting data sharing and interoperability, deepening synergistic industrial development, and expanding innovation capacity.

The study focuses on a novel porous TiNi-based material for ophthalmic orbital implants which was produced by self-propagating high-temperature synthesis (SHS) and, after proper surface modification, possesses a specific microstructure of its surface pores, which makes it attractive for biomedical use in implants. After preparation via SHS, the obtained porous TiNi material was etched in acidic environment, to get rid of its surface Ti2Ni secondary-phase particles. This was found to improve the material’s surface morphology, adding micro-roughness to its macro-rough pores. As a result, cell growth tests conducted on the material demonstrated improved cell adhesion and growth kinetics on such a porous material with improved roughness. Finally, the material was tested in vivo as an ophthalmic orbital implant, demonstrating good biocompatibility, good degree of biointegration with surrounding eyeball tissues, and no signs of rejection after as long as 180 days. Thus, the novel porous TiNi-based material shows promise for its use in ophthalmic implantology, for instanse for manufacturing musculoskeletal stumps of the eyeball after evisceration, as it is biocompatible, has a high tissue-implant integration potential and demonstrates reduced risks of exposure and rejection of the implant.

This research centers on the Mulberry-Dyke and Fish-Pond System in Digang Village, Huzhou, exem-plifying the traditional cyclic agricultural models of China. The study's objective is to evaluate its integral value concerning agricultural production, ecological environment, and heritage conservation. Employing the Analytical Hierarchy Process (AHP) and Fuzzy Comprehensive Evaluation (FCE) methodologies, we developed a comprehensive evaluation framework comprising 8 dimensions and 29 factors, aimed at assessing the provisioning, regulating, and cultural services of this ecosystem. The findings indicate a robust performance of the ecosystem services in Digang Village's Mulberry-Dyke and Fish-Pond System, with cultural services significantly standing out. In contrast, the regulating services appeared relatively weaker, pinpointing shortcomings in mulberry land management, while the provisioning services demonstrated substantial strength. These insights are pivotal for comprehending the system's ecosystem service values, highlighting areas for managerial improvements, and guiding future assessment and management strategies. This study contributes theoretical insights and empirical experiences for future evaluations of the Mulberry-Dyke and Fish-Pond System's ecosystem services.

Microvascular self-healing composite materials have significant potential for application and their mechanical properties need in-depth investigation. In this paper, tensile and compressive properties of woven fabric carbon fiber reinforced polymers (CFRP) laminates containing three-dimensional microvascular channels were investigated experimentally. Several detailed finite element (FE) models were established to simulate the mechanical behavior of the laminate and the effectiveness of different models were examined. The damage propagation process of the microvascular laminates and the influence of microvascular parameters were studied by the validated models. The results show that microvascular channels arranged along the thickness direction (z-direction) of the laminates are critical locations under the loads. The channels have minimal effect on the stiffness of the laminates but causing a certain reduction in strength, which varies approximately linearly with the z-direction channel diameter within its common design range of 0.1~1mm. It is necessary to consider the resin-rich region formed around microvascular channels in the warp and weft fiber yarns of the woven fabric composite when establishing the FE model. And the layers in model should be assigned with equivalent unidirectional ply material in order to calculate the mechanical properties of laminates correctly.

Understanding and predicting damage progression within thin plain-woven CFRP components is an essential issue for scheduling maintenance intervals and structural inspections, and typically require extensive test series. However, uncertainties always remain and result in conservative design and unnecessary downtimes due to the repeated inspections of a healthy structure. SHM can be used to reduce these uncertainties, as it allows to evaluate the condition of a mechanical structure during operation. Numerous SHM methods are developed , that achieve different levels of damage identification but are often investigated at small coupons with non-realistic structural damages and loading conditions on both, structure and sensor. The present research investigates the electrical impedance tomography (EIT) featuring an elastoresistive thin-film sensor to evaluate damage that propagates from a circular hole in a large plate under cyclic tensile-tensile multi-block loading. Applied fatigue loads were increased multiple times up to a total number of two million cycles. During the loading damage initiated at the hole and continuously propagated into the plate. Repeated EIT evaluations of the applied sensor and validating evaluations by means of digital image correlation clearly revealed the robustness of the hardware and the potential of the SHM method for damage evaluation of plain-woven CFRP components.

Diabetes self-management education helps to improve health outcomes, quality of life and to reduce expenses for diabetic patients. This systematic review aimed to examine the effectiveness of diabetes self-management education used for newly diagnosed patients with type 2 diabetes (T2DM). A review of studies that have researched the use and the impact of health education in newly diabetic patients with T2DM was implemented. A literature search was conducted using the electronic database of Pub MED, Walters Kluwer, Cochrane Library, Elsevier, JSTORE between January 2017 – November 2022. The data on participants and intervention characteristics were extracted by two reviewers independently. We found 789 studies and after selection of PRISMA flow chart we selected 19 studies, including 2512 newly diagnosed adult T2DM. Biomedical results presented the pooled effect of HbA1c -0.64%, FBG -0.32. The evaluation of emotional and social results and behavioral effects has been evaluated respectively in 10 and 9 studies. The education and support of recently diabetic patients help to improve biomedical, psychosocial, and behavioral results. This intervention must be ongoing to maintain healthy behaviors

This paper focuses on the data-driven evaluation ski resorts, employing the attractiveness index. Unlike similar studies, this research concentrates on smaller resorts essential for local economies. Input data acquired through meta-analysis offers insights into skier preferences, combining information from various sources, including volunteered geographic information (VGI). Employing a geographic information system (GIS), the study addresses pertinent questions regarding over-tourism, regional resort ratings, and spatial patterns, providing a foundation for sustainable development in alpine regions. As the case study, the evaluation of 40 regional ski resorts in Austria is introduced.

Interactions of different factors in differently tilled faba bean agrosystem is still insufficiently studied and evaluated. For these reasons we studied the results of long-term field experiment, which was carried out in the Research Station of Vytautas Magnus University, Agriculture Academy (Lithuania). The aim of this study is comprehensively evaluating the effect of the deep and shallow ploughing, deep cultivation-chiseling, shallow cultivation-disking, and no-tillage systems for faba bean cultivation on the much-interacted factors, relations between them and strength of impact by the integrated evaluation method using complex evaluation index (CEI). Calculations showed that the influence of the no-tillage system was the greatest on the faba bean agrosystem than other system used. Shallow cultivation was more efficient than deep and shallow ploughing and deep cultivation systems. In the deep ploughing system, there were calculated more minimal, i.e. close to 1 as the CEI value, which showed DP ineffectiveness.

The evaluation of tourism sustainability has become of paramount importance for researchers and decision-makers to better protect tourist destinations, especially with the continuous increase in the number of tourists and visitors that alter the natural components of the environment and degrade ecosystems. Therefore, the use of geographical data is of great significance, particularly in environmental monitoring and land management, due to its ease of use and availability. However, calculating composite indices for sustainability involves several steps and requires a basic understanding of existing models. This article describes the development and design of a package of plugins in QGIS that serves as an easy-to-use tool for processing and automatically calculating economic, environmental, social indices, and the overall index of tourist sustainability. These plugins have been built in Python and designed as QGIS software plugins.

Tungsten and its alloys are considered as a key component in high temperature environment. Self-passivating W-Si-xY alloys with different Y contents made from the powders milled for different times were prepared by mechanical alloying (MA) and spark plasma sintering (SPS). Their microstructures and oxidation resistance were investigated. It is found that the oxidation resistance of the alloys with low Y contents (0Y and 2Y) made from 20 h-milled powders is worse than that of the alloys made from 4 h-milled powders. It is because the protective WO3/SiO2 composite layer is discontinuous. While the alloys with high Y contents (4Y and 6Y) made from 4 h and 20 h-milled powders show good oxidation resistance. Even, the thickness of the oxide layer of the alloys with 4Y and 6Y made from 20 h-milled powders after oxidation at 1000 ℃ for 2 h is 84.0 μm and 70.7 μm, less than that made from 4 h-milled powders. This is due to the size and distribution of W5Si3, Y2Si2O7 aggregates and W-Y-O melt. The synergistic effects of Y contents and milling time on the microstructures and oxidation resistance of the alloys are revealed.

The perovskite solar cells (PSCs) have been significantly improved by utilizing inorganic hole transporting layer (HTL), such as nickel oxide. Despite the promising properties, there are still limitations due to defects. Recently, research on self-assembled monolayers (SAM) is being actively conducted, which show promise in reducing defects and enhancing device performance. In this study, we successfully engineered a p-i-n perovskite solar cell structure utilizing HC-A1 and HC-A4 molecules. These SAM molecules were found to enhance the grain morphology and uniformity of the perovskite film, which are critical factors in determining optical properties and device performance. Notably, HC-A4 demonstrated superior performance due to its distinct hydrophilic properties with a contact angle of 50.3°, attributable to its unique functional groups. Overall, the HC-A4 applied film exhibited efficient carrier extraction properties, attaining a carrier lifetime of 117.33 ns. Furthermore, HC-A4 contributed the superior device performance with its favorable band alignment, achieving the highest device efficiency of 20%.

Printed circuit boards (PCBs) make up 3 to 5% of all electronic waste. The metal content of spent PCBs can reach 40%. They usually contain valuable metals - Ag, Au, Pd, as well as other metals such as Cu, Sn, Pb, Cd, Cr, Zn, Ni and Mn. However metallic part of whole PCB is 40-60% including Cu layers between the fiberglass-polymer layers. The paper describes economics of the the valuable metals (Ag, Au, Pd) containing concentrate preparation from raw PCB. Considered the influence of pre-treatment method of PCB before the extraction of valuable metals on the extraction self-cost change. The disintegration method is based on the high-energy impact of the particles of the material to be ground, thus causing the separation of the metallic components of the PCB. In the course of the work, single and double direct grinding by the method of disintegration was studied. For the calculation the test batch 10’000 kg of two types of PCB were taken for estimation of the self costs and potential profit in case of complete valuable metals (Ag, Au, Pd) plus Cu extraction. Is shown that from 10’000 kg of studied PCB is possible to obtain 1144 and 1644 kg of metal-rich concentrate, which further should be subjected to electro-hydrochlorination for metals leaching. The main findings shows, that despite of high content of Cu in studied PCB, the commercial value is insignificant in total income from the Ag, Au and Pd sale. Was established correlation of the self-cost decrease after separative disintegration of PCB by metal content increase (by specific metals such as Au, Ag, Pd and also Cu) with the metal potential yield after extraction.

Objective The aim of this study was to examine the impact of a modern lifestyle on college female students' health, specifically focusing on their hip and knee joint mobility. The objective of this study was to assess the influence of hydraulic resistance training with the self-myofascial release technique on improving joint mobility in female college students. The training also aimed to compare the effectiveness of hydraulic resistance exercise with and without the self-myofascial release technique on hip and knee joint mobility.Methods The study used a randomized controlled trial design to recruit 30 female college students aged 18-25 through campus advertisements and announcements. Medical conditions or injuries that might have affected participation was screened. Participants were indiscriminately allocated to Group A (Hydraulic Resistance Training with Self-Myofascial Technique) or Group B (Hydraulic Resistance Training without Self-Myofascial Technique). The baseline assessments included joint range of motion (ROM) measurements using a goniometer. Certified trainers supervised the training sessions, and the data were analyzed using SD and mean using SPSS. ResultsThis study aimed to evaluate the impact of hydraulic resistance training with self-myofascial release on hip and knee joint mobility in female college students. The results showed that both groups showed improved hip and knee flexion with and without the self-myofascial release technique. However, the Group A using the self-myofascial release technique (Group A) showed a more significant enhancement, as indicated by the smaller p value compared to Group B. It has been suggested that the self-myofascial release technique may improve hip and knee joint mobility. ConclusionThis study concluded that Hydraulic Resistance Training with Self-Myofascial Release (HSMR) could improve hip and knee joint mobility among female college students. These findings suggest that integrating the self-myofascial release technique into training regimens can improve joint mobility. However, further research with larger sample sizes and extended intervention periods was needed to understand the long-term effects and sustainability of these improvements.

Introduction: In an era of increasing public awareness regarding the pivotal role of nutrition in the onset and progression of chronic degenerative diseases, there is a growing demand for information and assistance pertaining to the intricate relationship between diet and disease. Nutritional practices, therefore, emerge as a fundamental element in the prevention and management of these maladies, necessitating a proactive response from healthcare professionals (HCP). This study sought to evaluate the impact of participation in a Culinary Medicine (CM) program on Mediterranean diet adherence, food management skills, culinary proficiency, and counseling confidence among HCP. Methods: A mixed-methods pilot implementation program (PIP) was meticulously designed and executed, engaging a cohort of 20 HCP recruited from Hospital Clinic Barcelona. The program unfolded at the Alícia Foundation kitchen-lab and encompassed a series of interactive, hands-on sessions that delved into the realms of gastronomy, food management, culinary skills, and culinary diet therapy, with a specific focus on prevalent diseases and their prevention, treatment, and care. Tailored questionnaires were administered to all participants both before and after the PIP. Results: Of the 20 participants, 14 successfully completed the study, comprising 86% women, 86% aged above 40, 71% nurses, and 7% medical doctors. Interestingly, 86% of the participants had previously received nutrition training, whereas only 14% had received culinary training. Following the completion of the program, there was a remarkable improvement in adherence to the Mediterranean diet (p < 0.01). However, no statistically significant improvements were observed in food management and culinary skills or counseling confidence (p > 0.5). Despite the absence of statistical significance, there was a noteworthy trend towards greater advocacy for dietary changes before resorting to medication, along with enhanced confidence in providing nutritional and culinary guidance to patients. Conclusion: The findings from this study underscore the potential of hands-on CM training as a vital component of nutrition education for HCP. While statistically significant improvements in certain domains were not observed, the program did demonstrate its ability to influence attitudes, knowledge, and behaviors related to healthy cooking and eating for both HCP themselves and their patients. Given these promising trends, future studies with a larger sample size must be performed to further elucidate the impact of CM training on HCP and its potential benefits for public health.

With the development of electricity spot markets, accurate electricity load forecasting enables power generation companies to supply the right amount of electricity, Significantly avoid power waste. As a result, time series forecasting in the field of power can bring significant benefits. Previously, the Informer model successfully introduced the Transformer into long time series forecasting(LTSF) by proposing the ProbSparse self-attention mechanism, which solved the inherent problem of high memory complexity in self-attention. Recent research has further demonstrated the potential of the self-attention for mining complex dependencies. However, the limited amount of historical data has become one of the main challenges in applying deep learning techniques to power LSTF tasks. Previous reserches often add a large number of time covariates to provide more information. In this paper, to address this issue, (i) we design a simple but effective Season-aware Block to enhance the model’s ability to mine artificial prior information in temporal covariates; (ii) we conduct experiments using the provincial power data of Zhejiang Province, China, from 2019 to 2022, and our model outperforms other models, achieving a 19 percent MSE relative improvement; (iii) we conduct ablation experiments to assess the efficacy of the Season-aware Block in extracting temporal periodic features. Furthermore, we elucidate the underlying reasons for the effectiveness of both the self-attention mechanism and the Season-aware Block through visualization experiments.

Formaldehyde, sulfuric acid and salicylic acid were combined to create 3,3’-methylenebis[2-hydroxybenzoic acid] (MHB) ligand, which was subsequently permitted to bind with zinc ions. The ligand and its zinc (II) complex (Zn-MHB) have been described by a combination of elemental analyses, spectral (UV-Vis, IR, MS, NMR), XRD, TEM as well as TGA measurement. The ligand has been suggested to coordinate to the zinc center in tetradentate manner forming binuclear tetrahedral complex. An X-ray analysis indicated a considerable difference between MHB (crystalline) and Zn-MHB (amorphous). UV-Vis spectra were used to determine the optical properties such as bandgap, refractive index, optical conductivity and penetration depth. Possibility of employing the samples for optoelectronic applications was indicated from the band gap values which underlie the range of semiconductors. TEM revealed spherical shapes and mutation of ligand particles into nano-scale by complexation. The antimicrobial potential of the MHB towards gram-positive and negative bacterial growths has been investigated. The results suggested that it would be possible to employ MHB to stop bacterial development, particularly salmonella typhimurium. Cytotoxicity of the MHB was assessed against two types of mammalian cells: VERO (the kidney of an African green monkey) and HFB4 (human skin melanocytes). Lower sensitivity was observed in VERO cells.

Currently, the use of medications during pregnancy in Latin America is common; studies with Latin American samples find that nearly 90% of pregnant women use some medication at least once during pregnancy. Furthermore, approximately 21% of the respondents self-medicated. Worldwide, the prevalence of this disease is 32%. The most common medications are nonsteroidal anti-inflammatory drugs and analgesics. Many of these drugs are available over the counter without a prescription. For this reason, a systematic review of the literature on the adverse effects on the woman and the fetus was performed. Objective: To determine the adverse effects associated with the use of nonsteroidal anti-inflammatory drugs (NSAIDs) on pregnant women and fetuses during pregnancy. Methods: Systematic literature review. The following search strategy was used for the databases: Science Direct, PubMed, Scopus and Web of Science, through September 3, 2022. The population of pregnant women without previous comorbidities was defined. The intervention of interest was the use of NSAIDs during pregnancy. The outcomes of interest were adverse effects for the mother or fetus (weight of the newborn, congenital malformations present in the fetus, systemic effects in the pregnant woman during her gestation period). The types of studies included clinical trials, cohort studies and case‒control studies. Results: 1 study included 2,985 pregnant women without previous comorbidities. The use of aspirin more frequently during pregnancy stands out. The adverse effects on the fetus were preterm birth <37 weeks, low birth weight < 2500 g and increased admission to the neonatal intensive care unit. No adverse effects were found for the mother. Conclusions: There are not enough data indicating that the use of NSAIDs during pregnancy is safe. Some studies show that the use of NSAIDs during pregnancy could be related to problems in the development and growth of the fetus and health effects for the mother during pregnancy, so it is advisable to use these drugs under medical prescription and for the shortest possible time. in the gestation stage.

The study examines the behavior of the Mechanically Stabilized Earth (MSE) wall using available reinforcement materials in Danang, Vietnam. The MSE was reinforced by the self-fabricated galvanized steel grids using CB300V steel with 3 cm ribs. The backfill soil is a sandy clay soil from the local area with a low cohesion. A full-scale model with full instrumentation was installed to investigate the distribution of tensile forces along the reinforcement layers. The highest load that caused the wall to collapse due to internal instability (reinforcement rupture) was 302 kN/m2, which is 15 times the design load of 20 kN/m2. The failure surface within the reinforced soil had a parabolic sliding shape which is similar to the theoretical studies. At the failure load level, the maximum lateral displacement at the top of the wall facing was small (3.9 mm) which is significantly lower than the allowable displacements for the retaining wall. Furthermore, a numerical model using FLAC software was applied to simulate the performance of the MSE wall. The modeling results are in good agreement with the physical model. Thus, the self-fabricated galvanized steel grids could be confidentially used in combination with the local backfill soil for the MSE walls.

This paper deals with a method of calculating the self and mutual inductances of various air coils located arbitrarily in space. Known elementary solutions (the Biot-Savart formulas) were used to determine the magnetic field of infinitely thin current loops and infinitely thin wires of finite length linking magnetically other coils. Unlike commonly used algorithms, these elementary solutions were not extensively transformed analytically but were used to perform calculations by direct numerical integration. This enabled very quick and accurate obtaining of the self-inductance values as well as determining the dependence of mutual inductances on the position of both coils. This method allows analysis of different coil configurations (misaligned coils, inclined to each other, etc.) that other methods do not cover. It also enables the determination of the forces acting on the coils, as well as the calculation of the magnetic field distribution from any coil configuration. The obtained results were compared with those presented by other authors.

In this paper, an ultracompact combined sensor for displacement and angle synchronous measurement is proposed based on self-imaging effect of optical microgratings. Using a two-grating structure, linear and angular displacement can be measured by detecting the change of phase and amplitude of the optical transmission respectively within one single structure in meantime. The optical transmitted properties of the two-grating structure are investigated in both theory and simulation. Simulated results indicate that, the optical transmission changes in a sinusoidal relationship to the input linear displacement. Meanwhile, the amplitude of the curve decreases with an input pitch angle, indicating the ability for synchronous measurement within one single compact structure. The synchronous measurement of the linear displacement and the angle is also demonstrated experimentally. The results show a resolution down to 4nm for linear displacement measurement, and a sensitivity of 0.26mV/arcsec within a range of ±1° for angle measurement. Benefitting from a simple common-path structure without using optical components including reflectors and polarizers, the sensor shows an ultrahigh compactness for multiple-degrees-of-freedom measuring, indicating the great potential for this sensor in the fields such as integrated mechanical positioning and semiconductor fabrication.

With the constant growth of Software Defined Radio (SDR) technologies in wireless communications related fields the need for efficient ways to test and evaluate the Physical Layer (PHY) protocols developed for these technologies in real life traffic scenarios become more critical. This paper proposes a software testbed that enhances the creation of network environments that allow feeding GNU Radio applications with test traffic in a simple way and through an interoperable interface. This makes possible the use of any traffic generator, existent one or custom built to evaluate the GNU Radio application. In addition, the paper proposes an efficient way to collect PHY layer specific monitoring data that improves the performance of the critical components of the message delivery path by employing the Protocol Buffers library. The paper considers the entire testing and evaluation ecosystem and demonstrates how PHY layer specific monitoring information is collected, handled, stored, and processed as time series allowing complex visualization and real time monitoring.

This work deals with a novel porous TiNi-based material for ophthalmic orbital implants that was produced by high-temperature synthesis (SHS) and possesses a specific microstructure of its surface pores, which makes it attractive for biomedical use in implants. After preparation via SHS, the obtained porous TiNi material was etched in acidic environment, to get rid of its surface Ti2Ni secondary-phase particles. This was found to improve the material’s surface morphology, adding micro-roughness to its macro-rough pores. As a result, cell growth tests conducted on the material demonstrated improved cell adhesion and growth kinetics on such a porous material with improved roughness. Finally, the material was tested in vivo as an ophthalmic orbital implant, demonstrating good biocompatibility, good degree of biointegration with surrounding eyeball tissues, and no signs of rejection after as long as 180 days. Thus, the novel porous TiNi-based material shows promise for its use in ophthalmic implantology, for instanse for manufacturing musculoskeletal stumps of the eyeball after evisceration, as it is biocompatible, has a high tissue-implant integration potential and demonstrates reduced risks of exposure and rejection of the implant.

Postpartum depression is a significant health issue during the postpartum period and not only affects the woman but also has important repercussions for the newborn. Group support interventions during the postpartum period have proven effective in helping women cope with depression and improving breastfeeding rates. The aim of this study was to assess the effectiveness of a midwife-led breastfeeding support group intervention on breastfeeding rates, postpartum depression and general self-efficacy. This was a multicentric cluster randomized controlled trial with control and intervention groups and was not blinded. It was conducted in Andalusia (southern Spain) from October 2021 to May 2023. A total of 382 women participated in the study. Results showed a significant difference in exclusive breastfeeding rates at 4 months postpartum between the groups (p &lt; 0.001). Additionally, there was a lower mean score on the Edinburgh Postnatal Depression Scale in the intervention group (12.49 ± 3.6 vs 13.39 ± 4.0; p = 0.044). Similarly, higher scores of general self-efficacy were observed among breastfeeding women at 2 and 4 months postpartum (p = 0.002 and p &lt; 0.001, respectively). In conclusion, midwife-led breastfeeding support groups enhanced self-efficacy, prolonged breastfeeding and reduced postpartum depression 4 months after giving birth.

This article presents a hybrid approach to assessing students’ foreign language proficiency in a cyber-physical educational environment. It focuses on the advantages of integrated assessment of student knowledge by considering the impact of automatic assessment, learners’ independent work, and their achievements to date. An assessment approach is described using the mathematical theory of fuzzy functions, which are employed to ensure fair evaluation of students. The largest possible number of students, whose re-evaluation of test results will not affect the overall performance of the student group, is automatically determined. The study also models the assessment process in the cyber-physical educational environment through the formal semantics of calculus of context-aware ambients (CCA).

The Reactive Spark Plasma Sintering (R-SPS) method is compared in this work with the two-steps SHS-SPS route, based on combination of the Self-propagating High-temperature Synthesis (SHS) with the SPS process, for the fabrication of dense (Hf0.2Mo0.2Ti0.2Ta0.2Nb0.2)B2-SiC and (Hf0.2Mo0.2Ti0.2Ta0.2Zr0.2)B2-SiC ceramics. A multiphasic and inhomogeneous product, containing various borides, is obtained at 2000°C/20min by R-SPS, from transition metals, B4C and Si. In contrast, if the same precursors are first reacted by SHS, and then processed by SPS under the optimized condition of 1800°C/20min, the desired ceramics are successfully attained. Both High-Entropy-Boride/SiC products display densities > 97%, uniform microstructures and contained only small amounts of residual oxides (<2.4 wt.%). The presence of SiC makes the sintering temperature milder, i.e. 150°C below to that needed by the corresponding additive-free system. Fracture toughness is also markedly improved, particularly when considering the Nb-containing system processed at 1800°C/20min, whereas KIC progressively decreases (from 7.35 to 5.36 MPa m1/2) as the SPS conditions become more severe. SiC addition is found to inhibit the volatilization of metal oxides like MoO3 formed during oxidation experiments, thus avoiding mass loss in the ceramics. The benefits above also likely take advantage of the fact that the two composite constituents are synthesized in parallel, according to the SHS-SPS approach, rather than being produced separately and combined subsequently, so that strong interfaces between them are formed.

The study aimed to investigate how distributed leadership influences adolescents' social and emotional competence, considering the roles of student-centered instructional practices and teacher self-efficacy. Utilizing survey data from 7,246 Suzhou adolescents enrolled in the SESS program, the study employed multilevel structural equation modeling for analysis. The findings indicated a positive correlation between distributed leadership and adolescents' social and emotional competence, as evaluated by teachers. Moreover, distributed leadership was observed to exert an indirect impact on adolescents' self-assessment and teacher-rated social and emotional competence. This influence operated through several mediators: student-centered instructional practices, teacher self-efficacy, and the sequential mediating pathway of student-centered instructional practices → teacher self-efficacy. This study underscores the significance of supportive elements in fostering students' social and emotional competence. It offers valuable insights into the everyday practices of teachers, principals, and administrators. Additionally, it sheds light on how distributed leadership contributes to enhancing adolescents' overall social and emotional development.

Moving object detection plays a crucial role in various applications, particularly in traffic surveillance and collision warning systems. However, the high cost of training and slow detection pose significant challenges to the practicality and real-time performance of existing methods. These challenges hinder the practicality and real-time performance of existing methods. The need for a reliable and efficient moving object detection system prompts the search for cost-effective strategies. Enhancing detection speed without sacrificing accuracy is crucial for real-time applications. Overcoming these challenges is essential to advance the field of moving object detection and improve its applicability in various domains. This paper presents a comprehensive review of the literature on moving object detection, proposes novel strategies to overcome the challenges of high training costs and slow detection. The study emphasizes the importance of reliable speed monitoring systems and advancements in control systems to enhance driver assistance on urban highways. Each frame in the dataset undergoes YOLOv6 processing to detect and classify objects, generating bounding box predictions and class probabilities. Optical flow, specifically the Lucas-Kanade method, is then utilized to compute motion vectors between consecutive frames. These motion vectors facilitate object tracking across frames, enabling refined bounding box positions and improving overall object tracking accuracy. The results demonstrate the effectiveness of the proposed technique in reducing training costs, improving detection speed, and maintaining a high level of accuracy when compared to existing methods. The paper concludes by summarizing the findings and highlighting the potential of the proposed strategy for precise and reliable moving object recognition in real-world traffic scenarios

This study presents an in-depth analysis and evaluation of self-healing networks as an innovative solution to combat the escalating threat of ransomware attacks. Recognizing the limitations of traditional network security methods in the face of advanced cyber threats, the research focuses on the development and implementation of self-healing networks, characterized by their dynamic, intelligent response systems. Utilizing a combination of artificial intelligence and machine learning algorithms, these networks demonstrate remarkable adaptability and resilience. Through rigorous simulations, the study examines the efficacy of self-healing networks in detecting, isolating, and recovering from ransomware attacks, with an emphasis on their ability to learn and evolve from each incident. The research highlights the strengths and limitations of these networks and discusses their potential applications in various sectors. The findings suggest that self-healing networks, with their proactive and adaptive defense mechanisms, represent a significant advancement in cybersecurity strategies, offering a robust solution against a range of cyber threats. Future work is recommended to further enhance the capabilities of self-healing networks, particularly in the areas of speed, detection accuracy, and quantum-resistant security measures.

In an outstanding article published in 2008, Suzuki obtained a nice generalization of the Banach contraction principle from which derived a characterization of metric completeness. Although Suzuki’s theorem has been successfully generalized and extended in several directions and contexts, we here show by means of a simple example that the problem of achieving, in an obvious way, its full extension to the framework of w-distances does not have an emphatic response. Motivated by this fact we introduce the concept of presymmetric w-distance on metric spaces, we give some properties and examples of this new structure and show that it provides a reasonable setting to obtain a real and hardly forced w-distance generalization of Suzuki’s theorem. This is realized in our main result, which is a fixed point theorem that involves presymmetric w-distances and certain contractions of Suzuki-type. We also discuss the relationship between our main result and the well-known w-distance full generalization of the Banach contraction principle, due to Suzuki and Takahashi. Connected to this approach we prove another fixed point result that compare with our main result through some examples. Finally, we state a characterization of metric completeness by using our fixed point results.

Globally, the demand for plant-based alternative food is increasing rapidly as these products are getting quite popular in vegan and vegetarians. However, it is still in the early stage and faces various technological challenges, but the imitation of sensory profile is the most challenging part as the products are meant to be an alternative of meat. The development of similar product to meat requires an accurate selection of ingredients and processing. An understanding about the sensory profile can help to construct the product and technologies that are consumer centric and sustainable. In this review, we focus on the comparative differences in the sensory profile of animal meat and plant-based meat alternative specially in the color, texture and flavor, along with the method used to resemble them. The paper also explains about the sensory evaluation and how it affects the consumer preference and acceptability. Additionally, a direction to further research for developing better plant-based alternative products has also been suggested.

In today’s competitive landscape, achieving customer-centricity is paramount for the sustainable growth and success of organisations. This research is dedicated to understanding customer preferences in the context of the Internet of Things (IoT) and employs a two-part modeling ap-proach tailored in this digital era. In the first phase, we leverage the power of the Self-Organizing Map (SOM) algorithm to segment IoT customers based on their connected device usage patterns. This segmentation approach reveals three distinct customer clusters, with the second cluster demonstrating the highest propensity for IoT device adoption and usage. In the second phase, we introduce a robust Decision Tree methodology designed to prioritize various factors influencing customer satisfaction in the IoT ecosystem. We employ the Classification and Regression Tree (CART) technique to analyze 17 key questions that assess the significance of factors impacting IoT device purchase decisions. By aligning these factors with the identified IoT customer clusters, we gain profound insights into customer behaviour and preferences in the rapidly evolving world of connected devices. This comprehensive analysis delves into the factors contributing to customer retention in the IoT space, with a strong emphasis on crafting logical marketing strategies, en-hancing customer satisfaction, and fostering customer loyalty in the digital realm. Our research methodology involves surveys and questionnaires distributed to 207 IoT users, categorizing them into three distinct IoT customer groups. Leveraging analytical statistical methods, regression analysis, and IoT-specific tools and software, this study rigorously evaluate the factors influencing IoT device purchases. Importantly, this approach not only effectively clusters the IoT Customer Relationship Management (IoT-CRM) dataset but also provides valuable visualizations that are essential for understanding the complex dynamics of the IoT customer landscape. Our findings underscore the critical role of logical marketing strategies, customer satisfaction, and customer loyalty in enhancing customer retention in the IoT era. This research makes a significant contri-bution to businesses seeking to optimize their IoT -CRM strategies and capitalize on the oppor-tunities presented by the IoT ecosystem.

BACKGROUND: Patients with diabetic foot ulcers (DFU) and chronic limb-threatening ischemia (CLTI are at higher risk for major amputations and mortality. The aim of this study was to assess the safety and cost-efficacy of intramuscular injection of autologous monocyte-rich PRP platelet-rich plasma Tropocells® PRP (Estar Medical, Holon, Israel) in diabetic patients with chronic limb-threatening ischemia (CLTI) in which revascularization was not feasible. METHODS: a retrospective study was carried out on a series of patients with type 2 diabetes, grade Texas 3C or D DFU, and CLTI. All patients had undergone at least a previous revascularization and were allocated to a surgery waiting list for major amputation. According to the data provided by the manufacturer (https://www.zuccatobiotech.it/index.php/prodotti/tropocells), the monocyte-rich PRP kit obtained a platelet-rich plasma with a high concentration of peripheral blood mononuclear cells (with a proportionately lower amount of lymphocytes), a low concentration of neutrophils and an almost complete depletion of red blood cells. All patients underwent a procedure of local infiltration of autologous mononuclear cells through multiple perilesional and intramuscular injections of 10 mL PBMNC suspensions (0.2–0.3 mL in boluses) performed below the knee along the relevant vascular axis (anterior tibial artery and posterior tibial artery) at intervals of 1–2 cm and to a mean depth of 1.5–2 cm, using a 21 G needle. The procedures were performed according to the instructions of the manufacturer and were repeated at least two times (maximum 3 times) at intervals of 30 days. The principal endpoint was a composite of TcPO2 values at the first toe ≥30 mmHg and/or TcPO2 increase of at least 50% from baseline and/or ulcer healing. Secondary endpoints were individual components of the primary endpoint, quality of life, any adverse events, and direct costs. All the endpoints were evaluated at 26 weeks. RESULTS: Out of 21 enrolled patients, 13 (61.9%) reached the primary endpoint, whereas three patients underwent a major amputation, and two patients died. The median TpCO2 was significantly increased, and pain was significantly reduced. The overall mean and median cost per patient were 9,255±7,328€ and 4,001 [2,991;7,565]€, respectively. CONCLUSIONS: the use of PBMNCs implants in patients with DFU and no-option CLTI seems to be efficacious in reducing the risk of major amputation and improve ulcer healing.

Gastric outlet obstruction (GOO) poses a common and challenging clinical scenario, characterized by mechanical blockage in the pylorus, distal stomach, or duodenum, resulting in symptoms such as nausea, vomiting, abdominal pain, and early satiety. Its diverse etiology encompasses both benign and malignant disorders. The spectrum of current treatment modalities extends from conservative approaches to more invasive interventions, incorporating procedures like surgical gastroenterostomy (SGE), self-expandable metallic stents (SEMS) placement, and the advanced technique of endoscopic ultrasound-guided gastroenterostomy (EUS-GE). While surgery is favored for longer life expectancy, stents are preferred in malignant gastric outlet stenosis. The novel EUS-GE technique, employing a lumen-apposing self-expandable metal stent (LAMS), combines the immediate efficacy of stents with the enduring benefits of gastroenterostomy. Despite its promising outcomes, EUS-GE is a technically demanding procedure requiring specialized expertise and facilities.

Neurodegeneration is becoming one of the leading causes of death worldwide as the population expands and grows older. There is a growing desire to understand the mechanisms behind prion proteins as well as the prion-like proteins that make up neurodegenerative diseases (NDs) including Alzheimer’s Disease (AD). Both amyloid β (Aβ) and hyperphosphorylated tau (p-tau) proteins behave in ways similar to that of the infectious form of the prion protein, PrPSc, such as aggregating, seeding, and replicating under not yet fully understood mechanisms, thus the designation of prion-like. This review aims to highlight the shared mechanisms between prion-like proteins and prion proteins in the structural variations associated with aggregation and disease development. These mechanisms are largely focusing on the dysregulation of protein homeostasis, self-replication, and protein aggregation, and how this knowledge could contribute to diagnoses and treatments for the given NDs.

This study explores the interplay between web-based professional development, teachers' self-efficacy, resilience, and work values in the context of the Davao Region. The investigation reveals significant findings in three key areas: web-based professional development, teachers' resilience, and teachers' work values. The survey indicates that web-based professional development significantly impacts teachers' self-efficacy, with interaction self-efficacy registering the highest mean score. Moreover, teachers' resilience is manifested across emotional, motivational, and social dimensions, with emotional resilience scoring the highest mean. Teachers' work values, encompassing physical facilities, social environment, job security, new challenges, professional growth, personal growth, and interpersonal relationships, all demonstrate high descriptive equivalents. The study establishes a significant positive correlation between web-based professional development and teachers' self-efficacy, as well as a significant relationship between teachers' resilience and their work values. Furthermore, both web-based professional development and teachers' resilience exert a significant influence on teachers' work values.The conclusions drawn from the study highlight the prominence of web-based professional development, teachers' resilience, and work values in the educational landscape of the Davao Region. The findings underscore the interconnectedness of these factors and their crucial role in shaping the teaching profession. In light of these results, recommendations are made to inform policy decisions and enhance professional development programs for teachers in the region. The study encourages a holistic understanding of the relationships between web-based professional development, self-efficacy, resilience, and work values, aiming to contribute to the continuous improvement of education quality in the Davao Region. Additionally, future research is suggested to delve deeper into specific aspects of teachers' general self-efficacy, social resilience, and interpersonal relationships for a more comprehensive understanding.

This study aimed to expand and inform the growing body of research on Postpartum Depression, from a netnographic standpoint, for the social media platform of Pinterest. More specifically, it aimed to assess the type of content present on Pinterest regarding Postpartum Depression shared by women in 2018 and 2021, as well as examine the subjective experience of women who have experienced this mood disorder. Data were collected following a search using the keywords “Postpartum Depression” on Pinterest on two separate timestamps (2018 and 2021); pins were limited to those in English or French. Master themes were identified among all pins and those identified as “self-disclosure” were subsequently further analyzed. Self-disclosure data were separately analysed using thematic analysis, specifically adopting a deductive thematic approach for the 2021 data set stemming from the coding scheme created from analysis of the 2018 data. Major themes were identified, and an analysis of frequency was performed for each sub-theme, along with qualitative examples associated with each theme. A total of 483 Pinterest pins from two different time points of 2018 (169 pins) and 2021 (314 sample pins) were analyzed. Five primary categories were identified in both 2018 and 2021, with five additional categories being identified in the 2021 dataset. Comparative results from 2018 and 2021 self-disclosure pins show individuals’ varying yet similar subjective manifestations of PPD, the potential need to adopt a multidisciplinary treatment approach, and the societal fears, such as mental health stigma, that are playing a part in help-seeking behavior hesitancies. Our findings provide imperative insight into individuals’ subjective experiences with PPD; experiences that involve a sensitive and vulnerable topic. Netnographic research, along with Pinterest, must be taken into consideration for future work delving into women’s health issues, including those surrounding perinatal mental health.

In this paper, we propose a novel approach named EmbedHDP to enhance the evaluation models used to assess sentence suggestions within nursing care record applications. The key focus is determining whether these suggestions garner assessments that align with caregivers as human evaluators. It is crucial due to the direct relevance of the information provided to the health or condition of the elderly. The motivation behind this proposal stems from challenges observed in previous models, such as BERTScore, which encountered difficulties in effectively evaluating the nurse care record domain, consistently providing quality assessments of generated sentence suggestions above 60%. Additionally, while widely used, cosine similarity exhibits limitations concerning word order, leading to potential misjudgments of semantical differences within similar word sets. Similarly, relying on lexical overlap, ROUGE tends to overlook semantic accuracy. Furthermore, despite its utility, BLEU neglects semantic coherence in its evaluations. EmbedHDP excels in evaluating nurse care records by effectively handling a variety of sentence structures and medical terminology and providing differentiated and contextually relevant assessments. We used a dataset comprising 320 pairs of sentences with correspondingly equivalent lengths. The results revealed that EmbedHDP outperformed other evaluation models, achieving a coefficient score of 61%, followed by cosine similarity with a score of 59%, and BERTScore with 58%. This shows the effectiveness of our proposed approach in improving the evaluation of sentence suggestions in nursing care record applications.

his quantitative study investigates teachers' perceptions of self-efficacy during the COVID-19 pandemic and explores the correlation between these perceptions and the preservice training they received. The research addresses the cognitive connection between teachers' current self-efficacy, particularly their satisfaction with and appreciation of preservice lecturers. Utilizing a retrospective lens, the study reveals a significant correlation between teachers' evaluation of their preservice training, especially their appreciation of lecturers, and their present self-efficacy. The findings highlight that teachers, amidst the challenges of the pandemic, evaluated their self-efficacy at a remarkably high level. This underscores their resilience during a period of unprecedented uncertainty, demanding substantial personal and professional adaptability. The nuanced interplay observed suggests that teachers' sense of self-efficacy serves as a predictive variable of their mental and professional resilience when confronting uncertainty and navigating rapid and profound changes, as exemplified by the exigencies of the COVID-19 pandemic.

Nucleobase-containing molecules are compounds essential in biology due to the fundamental role of nucleic acids, and in particular G-quadruplex DNA and RNA in life. Moreover, some molecules different from nucleic acids isolated from different vegetal sources or microorganisms show nucleobase moieties in their structure. Nucleoamino acids and peptidyl nucleosides belong to this molecular class. Closely related to the above, nucleopeptides also known as nucleobase-bearing peptides are chimeric derivatives of synthetic origin and more rarely isolated from plants. Herein the self-assembly properties of a vast number of structures, belonging to the nucleic acid and nucleo amino acid/nucleopeptide family, is explored in the light of the recent scientific literature. Moreover, several technologically relevant properties such as the hydrogelation ability of some of the nucleobase-containing derivatives are reviewed in order to open the door to future experimental investigations of newly-inspired nucleobase-driven hydrogels. Nucleobase-containing molecules, such as mononucleosides, DNA, RNA, quadruplex (G4)-forming oligonucleotides and nucleopeptides, are paramount in gel and hydrogel formation owing to their distinctive molecular attributes and ability to self-assemble in biomolecular nanosystems with the most diverse applications in different fields of biomedicine and nanotechnology. In fact, these molecules and their gels present numerous advantages, underscoring their significance and applicability in both material science and biomedicine. Their versatility, capability for molecular recognition, responsiveness to stimuli, biocompatibility, and biodegradability collectively contribute to their prominence in modern nanotechnology and biomedicine. In this review, we emphasize the critical role of nucleobase-containing molecules of different nature in pioneering novel materials with multifaceted applications highlighting their potential in therapy, diagnostics, and new nanomaterials fabrication as required in order to address the numerous current biomedical and nanotechnological challenges.

In our latest studies with the help of the self-similar Ansatz we derived new type of 1 solutions for the regular diffusion equation which are much more complex than the well-known 2 Gaussian and error functions. These solutions contain additional Kummer’s M and Kummer’s U 3 functions with quadratic argument. In the present treaties we perform an analogous analysis for the 4 regular diffusion equation which has a complex diffusion coefficient. Formally, it is equivalent to 5 the free Schrödinger equation however it is far from being trivial how the solutions can be given 6 quantum mechanical interpretation. We investigate both the one dimensional Cartesian and the 7 spherical symmetric equations. We find solutions which fulfill the L2 integrability criteria therefore 8 might have quantum mechanical relevance in the future.

In contrast to its traditional form, in which large, powerful companies were solely and exclusively responsible for supplies, manufacturing, and distribution, the supply chain has undergone substantial change over the past half-century. Today, nearly all supply chain processes are outsourced, thanks to the efforts of innovative, modern companies. The degree of risk associated with contemporary supply chains is greater than the majority of supply chain managers acknowledge, according to an accumulation of studies, analysts, and news outlets. Vulnerabilities within the supply chain remain a significant challenge for numerous organizations. Inadequate management of these risks—which include, but are not limited to, natural disasters, acts of terrorism, cyber assaults, the credit crisis, pandemic scenarios, and war—could lead to significant declines in profitability, productivity, revenue, competitive advantage, and other metrics. Concerns regarding the risk assessment of the supply chain remain unresolved. The objective of this article is to present a risk evaluation framework that can be effectively implemented in the assessment of supply chain risks. This study makes a fundamental contribution to the body of knowledge by providing supply chain managers with a practical instrument for assessing their processes, irrespective of the mathematical underpinnings or the diverse variables employed in risk assessment. A case study from an automotive EMS production is used to compare the outcomes of multiple aggregation methods; the conclusions are then validated by risk and FMEA specialists from the same factory.

Self-consolidating concrete (SCC) is highly workable concrete that flows under minimal vibrations into congested reinforcement and sophisticated formworks. The properties of SCC are achieved by incorporating chemical admixtures. In this study, we analyzed if SCC could be designed with a cheap, easily accessible plant extract as a bio-admixture known as aloe vera mucilage (AVM). The main aim is to determine the effect of AVM on SCC prepared from ordinary Portland cement (OPC) and blended cement LC3, consisting of clinker (50%), calcined waste clay (30%), limestone (15%), and gypsum (5%). The AVM is applied in different dosages of up to 10%. The findings showed that the LC3 had a lower rate of consistency, lower slump values, and higher initial and final setting times compared to OPC. The V-funnel and L-box values were reduced with increased plasticizer dosing. Additionally, the OPC samples with both plasticizers achieved higher compressive strength than LC3 in the 7, 14, and 28 curing ages. However, the 2.5 % dosage of AVM showed some increase in compressive strength in both OPC and LC3 samples. Overall, AVM is comparable to the commercial plasticizer used as both influence the reduction of yield stress with an increase in slump flow.

Nondestructive determination of the neutron irradiation induced embrittlement of nuclear reactor pressure vessel steel is a very important and recent problem. In the frame of the so called NOMAD project, funded by the Euratom research and training program, novel nondestructive electromagnetic testing methods were applied for inspection of irradiated reactor pressure vessel steel. In this review the most important results of this project are summarized. Different methods were used and compared with each other. Measurement results were compared with the destructively determined ductile to brittle transition temperature (DBTT) values. Three magnetic methods: 3MA (micromagnetic, multiparameter, microstructure and stress analysis), MAT (magnetic adaptive testing) and Barkhausen noise technique (MBN) were found as the most promising techniques. The results of these methods were in good confidence with each other. Good correlation was found between the magnetic parameters and the DBTT values. The basic idea of the NOMAD project is to use a multi-method/multi-parameter approach and to focus on their synergies that allows to recognise the side effects therefore supressing them at the same time. Different types of Machine Learning (ML) algorithms were tested in competition and their performances were evaluated. The important outcome of the ML technique is that not only one, but several different ML techniques could reach required precision and reliability, i.e. to keep the DBTT prediction error lower than +/-25°C threshold, which was previously not possible for any of the NDE methods as single entities. A calibration/training procedure was carried out on the merged outcome of testing methods with excellent results to predict transition temperature, yield strength and mechanical hardness for all investigated materials. Our results, achieved within NOMAD project can be useful for the future potential introduction of this (and in general, any) nondestructive evolution method.

This paper offers a comprehensive examination of the process involved in developing and automating supervised end-to-end machine learning workflows for forecasting and classification purposes. It offers a complete overview of the components (i.e. feature engineering, model selection, etc), principles (i.e. bias-variance decomposition, model complexity, overfitting, model sensitivity to feature assumptions and scaling, output interpretability, etc), models (i.e. neural networks, regression models, etc), methods (i.e. Cross-Validation, data augmentation, etc), metrics (i.e. Mean Squared Error, F1-score, etc) and tools that rule most supervised learning applications with numerical and categorical data, as well as their integration, automation, and deployment. The end goal and contribution of this paper is the education and guidance of the non-AI expert academic community over complete and rigorous machine learning pipelines and data science practices, from problem scoping to design and state-of-the-art automation tools, including basic principles and reasoning in the choice of methods. The paper delves into the critical stages of supervised machine learning workflow development, many of which are often omitted by researchers due to brevity, and covers foundational concepts essential for understanding and optimizing a functional machine learning workflow, thereby offering a holistic view of task-specific application development for applied researchers who are not AI experts.

Lipophilic oligonucleotide derivatives are a potent approach to the intracellular delivery of nucleic acids. The binding of these derivatives to serum albumin is a major determinant of their fate in the body, as its structure contains several sites of high affinity for hydrophobic compounds. This study focuses on the features of self-association and non-covalent interactions with human serum albumin of novel self-penetrating oligonucleotide derivatives. The study revealed that the introduction of a triazinyl phosphoramidate modification bearing two dodecyl groups at the 3' end region of the oligonucleotide sequence has a negligible effect on its affinity for the complementary sequence. Dynamic light scattering verified that the amphiphilic oligonucleotides under study can self-assemble into micelle-like particles ranging from 8 to 15 nm in size. The oligonucleotides with dodecyl groups form stable complexes with human serum albumin with a dissociation constant of approximately 10-6 M. The oligonucleotide micelles are simultaneously destroyed upon binding to albumin. Using an electrophoretic mobility shift assay and affinity modification, we examined the ability of DNA duplexes containing triazinyl phosphoramidate oligonucleotides to interact with Ku antigen and PARP1, as well as the mutual influence of PARP1 and albumin or Ku antigen and albumin upon interaction with DNA duplexes. These findings, together with the capability of dodecyl-containing derivatives to effectively penetrate different cells, such as HEK293 and T98G, indicate that the oligonucleotides under study can be considered as a platform for the development of therapeutic preparations with a target effect.

This article introduces a new physically based Lyapunov function difinition, which can be used as acoustic energy for finite amplitude pressure oscillations in reacting systems especially in combustion chambers. Reacting flow is seen as an open, non-equilibrium (parameters are distributed unevenly locally) thermodynamic system. This Lyapunov function is defined as the maximum mechanical work, which could be extracted by a heat engine from studied system, if this system would be disconnected from inlet and outlet and from any other surrounding environment, and the engine could transfer to the surrounding environment only mechanical work.

This paper presents the design and measurement of an IEEE 802.11ad standard compatible RF transceiver for 60GHz wireless communication system. In addition to the traditional half-duplex (HD) mode, this work supports full-duplex (FD) operation to deliver better channel utilization and faster response time for the system. The isolation between the transmitter and receiver from the architecture design to system integration for FD operation has been fully considered. A digital self-interference cancellation (DSIC) is implemented in MATLAB to verify the FD performance. The super-heterodyne architecture with an intermediate frequency (IF) of 12GHz is designed to suppress the image frequencies without using extra filters. A flexible phase-locked loop (PLL) synthesizer provides a local oscillator (LO) frequency with a 2kHz resolution. Other than the time division duplex (TDD) mode used in the conventional 60GHz system, a wide bandwidth baseband digital variable gain amplifier (DVGA) with a 3dB bandwidth of more than 4GHz also supports frequency division duplex (FDD) operation. The transceiver chip is fabricated in Tower Jazz 0.18µm SiGe BiCMOS process. With on-board antenna, the transceiver covers all four channels in 802.11ad standard with MCS-12 (7.04Gbps under 1.76GSym/s and 16-QAM) under 1.5m. In the proposed system design, the RF frontend based self-interference (SI) suppression from the local transmitter to receiver LNA is around 54dB. To achieve a practical FD application, the SI is further suppressed with the help of digital SI compensation. The measured power consumption for transmitter and receiver configuration is 194mW and 231mW, respectively, in HD mode and 398mW for FDD or FD operation mode.

Premature failure and degradation of layers are the main problems for transportation infrastruc-ture. Addressing these issues necessitates implementing structural health monitoring (SHM) for transportation layers. This strategic approach is instrumental in mitigating maintenance expenses, prolonging the operational lifespan, and preventing accidents resulting from abrupt layer col-lapse. To this end, this research investigated the stress/strain and damage detection capabilities of a self-sensing cementitious composite developed for potential utilization in the construction of an intelligent subgrade layer. The prepared self-sensing cementitious composite consisted of 10% cement and hybrid conductive fillers, including multiwalled carbon nanotubes (MWCNTs) and graphene nanoplatelets (GNPs) in sand. Initial findings reveal that the electrical resistivity of the composite is significantly affected by the concentration of MWCNTs/GNPs, with a minimum concentration of more than 0.5% needed to achieve a responsive cementitious composite. More-over, the piezoresistive analysis indicates that an increase in the concentration of MWCNTs/GNPs and stress levels leads to an improvement in the stress/strain sensing perfor-mance. When the self-sensing cementitious composite is subjected to equivalent stress levels, variations in the FCR exhibit an increasing trend with decreasing resilient modulus, stemming from a decrease in stiffness due to the increased concentration of MWCNTs/GNPs. Additionally, the EIS analysis demonstrates a contraction for the Nyquist curves under compressive ramp loading prior to failure, followed by the expansion of these curves postfailure. Scanning electron microscopy (SEM) images visually showcase the bridging effects of MWCNTs and the filling ef-fects of GNPs within the composite structure.

Risk management strategies protect the company as a whole as well as employees from unforeseen financial impacts. As in the case of personal finance, preparing for certain scenarios helps to face any difficulties that the company may encounter and allows it to get out of this impasse.For any project to be successful, the way the project executing agency will deal with potential risks must be determined so that it can identify, mitigate or avoid problems when it needs to do so. Successful project managers realize that risk management is important, because the achievement of project objectives depends on planning, preparation, results and evaluation that contribute to the achievement of strategic goals, especially the sustainable development of societies.Risk management strategies work to protect the company as a whole as well as employees from unexpected financial effects, and as is the case in personal finance, preparing for certain scenarios helps to face any difficulties that the company may face and allows it to get out of this impasse.To ensure the success of your project, determine how you will handle potential risks so that you can identify, mitigate or avoid problems when you need to do so. Successful project managers understand that risk management is important, because the achievement of project objectives depends on planning, preparation, results, and evaluation that contribute to the achievement of strategic objectives.

The evolution of sentence representation learning, especially with parse tree encoders, has shown remarkable progress. Traditional approaches predominantly rely on recursive encoding of tree structures, which impedes parallel processing capabilities. Additionally, these methods often overlook the significance of dependency tree arc labels. To overcome these limitations, we introduce the Syntax-Enhanced Transformer (SET), incorporating a novel dual-attention mechanism that integrates relation-focused attention alongside traditional self-attention. This design effectively encodes both dependency and spatial positional relationships within sentence dependency trees. Our approach innovatively incorporates syntactic information into the Transformer framework without compromising its inherent parallelizability. The SET demonstrates superior or comparable performance to contemporary methods across various sentence representation tasks, significantly enhancing computational efficiency.

A Berry geometrical phase is identified in a strongly metastable system containing dynamically responsive clathrate hydrate structures within a crystal-fluid material. High energy degeneracy in the associated chemistry produces local stability and false vacuum conditions that lead to non-extensive and non-additive contributions in the fundamental thermodynamic relation. The reciprocating action of a piston expander confirms a net energy gain despite the crystal-fluid material maintaining almost constant density. Application of Ginzburg-Landau theory and the scaling laws reveals a coherence length and a penetration depth for a macro-scale dual superconductor. The coherence length determines non-extensive volume changes whilst its inverse gives the Higgs mass. The penetration depth determines the extent of QCD vacuum suppression whilst its inverse gives the vector boson mass together with indirect manifestation as non-additive hyperbolic curvature. External pressure perturbations of the low-energy system initiate ‘rolling’ critical responses that see energy and momentum conserved across a synchronized U(2) symmetry group whilst a complex gauge field is also exposed. Simultaneous emergence of the Ginzburg-Landau superconducting phase transition is consistent with gauge-invariant coupling of this scalar field to the Yang-Mills action in QCD. The discovery of an energy gap in the gradient energy term of the system Lagrangian is associated with a critical correlation length revealed in the transition from a gapped to a gapless superconducting state. Together with the emergence and absorption of the Higgs-like scalar field, a mechanism for describing the QCD mass gap arises.

Grape pomace (GP) is a winemaking residue that can be used as a functional ingredient due to its phenolic content, among others. The influence of GP, grape pomace extract (GPE) and encapsulated grape pomace extract (BGPE) on the phenolic compounds content, physical, textural and sensory properties of the functional biscuit (FB) was studied. In the production of FB, 10-30 % of the wheat flour in the standard biscuit was replaced by GP or by adding GPE and BGPE in amounts equivalent to the phenolic content of GP. The highest content of phenolic compounds was found when 30 % of GP was used. The antioxidant activity (AA) correlated well with the phenolic compound content (R > 0.87). The antiproliferative activity of biscuit extracts against cancer cell lines is in the following order: SW620 > Caco-2 > Hep G2, but the positive correlation with phenols and AA was not found. Textural properties of biscuits with GPE and BGPE addition were worse compared to GP and standard biscuits, i.e. they were harder. Biscuits with BGPE addition received the highest overall sensory score. The results indicate that biscuits enriched with phenolics from grape pomace could be a promising functional food with good sensory properties.

Tight gas, a category of Deep Green Energy Resources, rely on advanced intelligent monitoring methods for their extraction. Conventional logging for reservoir evaluation relies on logging data and the manual setting of evaluation criteria to classify reservoirs. However, the complexity and heterogeneity of tight reservoirs pose challenges in accurately identifying target layers by using traditional well-logging techniques. Machine learning may hold the key to solving this problem, as it enables computers to learn without being explicitly programmed and manually added rules. Therefore, it is possible to make reservoir evaluation via using machine learning methods. In this paper, the reservoir quality index (RQI) and porous geometric parameters obtained from the optimized inversion of the spherical-tubular model are adopted to evaluate the reservoir. Then, three different machine learning approaches, the random forest (RF) algorithm, support vector machine (SVM) algorithm, and extreme gradient boosting (XGB) algorithm, are utilized for reservoir classification. The selected dataset covers more than 7,000 samples from five wells. The data from four wells are arranged as the training dataset, and the data of the remaining one well is designed as the testing dataset to calculate the prediction accuracies of different machine learning algorithms. Among them, accuracies of RF, SVM, and XGB are all higher than 90%, and XGB owns the highest result by reaching 97%. Machine learning based approaches can greatly assist reservoir prediction by implementing the well-logging data. The research highlights the application of reservoir classification with a higher prediction accuracy by combining machine learning algorithms with NMR logging based pore structure characterization, which can provide a guideline for sweet spot identification within the tight formation. This not only optimizes resource extraction but also aligns with the global shift towards clean and renewable energy sources, promoting sustainability and reducing the carbon footprint associated with conventional energy production. In summary, the fusion of machine learning and NMR logging based reservoir evaluation plays a crucial role in advancing both energy efficiency and the transition to cleaner energy sources.

The purpose of this study is to analyze the self-regulated learning and the ability to write scientific papers of students after learning with the Project-Based Digital Science Module (DSM). This research is a mixed methods by analyzing quantitatively and qualitatively. The research instrument used to obtain data is using a product assessment sheet and a self-regulated learning questionnaire. Data analysis uses N-Gain to determine the increase in self-regulated learning scores and student scientific writing skills scores, and uses linear regression analysis to determine the effect of self-regulated learning on student scientific writing skills. The results obtained showed N-Gain score of learning independent is 0,65 and scientific writing ability is 0,94, then significant’s score from linear regression by using SPSS is 0,22 < 0,05. This result showed an increase in self-regulated learning and the ability to write scientific papers of students on each indicator after learning using the Project-Based Digital Science Module (DSM). In addition, based on the results of data analysis, it can be seen that there is an influence of self-regulated learning on the ability to write scientific papers of students after learning using the Project-Based Digital Science Module.

The COVID-19 pandemic has disrupted healthcare worldwide, potentially impacting disease management. This cross-sectional study assessed the influence of COVID-19 on diabetes self-management in 341 Saudis with type 2 diabetes using the Diabetes Self-Management Questionnaire (DSMQ). The DSMQ contains 16 items across 4 domains assessing glucose management, dietary control, physical activity, and healthcare use. Three additional items measured the perceived overall impact of COVID-19. Total DSMQ scores were significantly higher in patients aged &gt;60 years versus younger groups. Scores were significantly lower in patients diagnosed for 1-5 years versus longer durations. Patients on insulin had higher glucose management subscores than oral medication users. Overall, DSMQ scores were higher than the pre-pandemic Saudi population and Turkish post-pandemic findings. DSMQ results suggest that while COVID-19 negatively impacted some self-management domains, Saudi patients upheld relatively good diabetes control during the pandemic. Further research is warranted on specific barriers to optimize diabetes care during public health crises.

Ethics values for public officers are important for enhancing cultural ethical levels and keeping society free from low-level barbarian ethical values. Barbarian ethics values are reflected in animal behavior, as in some countries security agencies, and a culture based on strength is dominant, especially in political and military parties. This study gave insight into the change in security agency duties from fighting criminal activities to managing criminal activities. Keeping high-level ethical values is essential for enhancing the behavior of public officers and stakeholders in any official institution at a standard level. This study provides stakeholders with a clear vision of the different defects in public institutions and how to improve and avoid negative ethical issues. By identifying all aspects of public officers and deviations from ideal ethical values for public officers,the negative ethical values in security agency officers have been noticed for a long time due to feelings of injustice or unfairness in native citizens of any country, generating mafia-based institutions instead of police departments or security agencies in any country.

The aim of article is to design a calm water resistance predictor based on Machine Learning Tools and development of a systematic series for battery-driven catamaran hull forms. Regression Trees (RT), Support Vector Machines (SVM), and Artificial Neural Network (ANN) regression models are applied for dataset training on developed systematic series of catamarans. A hullform optimization was implemented for various catamarans including dimensional and hull coefficient parameters based on resistance and structural weight reduction and battery performance improvement. This paper provides a diverse database of catamaran hullform. Hence, an automated Matlab program was coded for geometry generation and cost function evaluation. Design distribution based on Lackenby transformation fulfills all design space and sequentially a novel self-blending method reconstructs new hullforms based on two parents blending. Finally, a machine learning approach was conducted on generated data of case study. This study shows that ANN algorithm correlates well with the measured resistance. Accordingly, a general and unique tool is proposed for optimized and desired design in first design stage.

This research addresses the respiratory distress syndrome (RDS) in preterm newborns, caused by insufficient surfactant synthesis, which can lead to serious complications, including pneumothorax, pulmonary hypertension, and pulmonary hemorrhage, increasing the risk of a fatal outcome. By analyzing chest radiographs and blood gases, we specifically focus on the significant contributions of these parameters to the diagnosis and analysis of the recovery of patients with RDS. The study involved 32 preterm newborns, and the analysis of gas parameters before and after the administration of surfactants and inhalation corticosteroid therapy revealed statistically significant changes in values of parameters such as FiO2, pH, pCO2, HCO3 and BE (Sig.&lt;0.05), ehile the pO2 parameter showed a potential change (Sig.=0.061). Parallel to this, the research emphasizes the development of a lung segmentation algorithm implemented in the MATLAB programming environment. The key steps of the algorithm include preprocessing, segmentation, and visualization for a more detailed understanding of the recovery dynamics after RDS. These algorithms have achieved promising results, with a global accuracy of 0.93±0.06, precision 0.81±0.16 and an F-score of 0.82±0.14. These results highlight the potential application of algorithms in the analysis and monitoring of recovery in newborns with RDS, also underscoring the need for further development of software solutions in medicine, particularly in neonatology, to enhance the diagnosis and treatment of preterm newborns with respiratory distress syndrome.

Hox gene clusters are crucial in Embryogenesis. It was observed that some Hox genes are located in order along the telomeric to centromeric direction of the DNA sequence: Hox1, Hox2, Hox3…. These genes are expressed in the same order in the ontogenetic units of the Drosophila embryo along the Anterior-Posterior axis. The two entities (genome and embryo) differ significantly in linear size and in-between distance. This strange phenomenon was named Spatial Collinearity (SP). Later, it was observed that, particularly in the Vertebrates, a Temporal Collinearity (TC) coexists: first is Hox1 expressed, later Hox2 and even later Hox3,…,. According to a Biophysical Model (BM), pulling forces act at the anterior end of the cluster while a cluster fastening applies at the posterior end. Hox clusters are irreversibly elongated along the force direction. During Evolution, the elongated Hox clusters are broken at variable lengths thus split clusters may be created. An Empirical Rule was formulated distinguishing development due to a complete Hox cluster from development due to split Hox clusters. BM can ‘explain’ this Empirical Rule. In a spontaneous mutation where the cluster fastening is dismantled, a minimal pulling force can automatically shift the cluster inside the Hox activation domain. This cluster translocation can probably explain the absence of Temporal Collinearity in Drosophila.

The benefits of event-driven architecture (EDA) derive from how systems and components are loosely coupled, which can facilitate independent development and deployment of systems, improved scaling and fault tolerance, and integration with external systems, especially in comparison to monolithic architectures. With the advent of new technologies such as containers, and microservices, a new generation of distributed event streaming platforms are commonly used in event-driven architecture for efficient event-driven communication. However, the asynchronous and distributed nature of EDA poses several problems that include handling failures, the dependence of an end-to-end transaction on individual component stability, etc. In this paper, we describe a new approach to designing self-regulating distributed applications with autopoietic and cognitive workflow management. This approach is based on the new science of information processing structures derived from the General Theory of Information. Just as a genome enables self-organizing and self-regulating biological structures, a digital genome enables a specific software application with several components, the ability to use distributed resources and self-regulate the evolution of the system based on functional and non-functional requirements, and best-practice policies that maintain the stability, safety, and survival under non-deterministic fluctuations in the demand for resources. In addition, cognitive workflow management assures end-to-end transaction delivery.

Underground storage of natural gas has the characteristics of clean and low-carbon, and has the ability to provide sustainable and stable supply. It is a very high-quality green energy that can increase the storage efficiency of gas storage through fracturing, achieving the sustainable development goal of "Carbon Peaking and Carbon Neutrality". The accurate evaluation of the fracability of a reservoir is an important prerequisite for reservoir fracturing design and post fracturing productivity evaluation. At present, research on fracability is mainly based on qualitative characterization or quantitative evaluation based on rock mechanics and fracturing construction parameters, which cannot fully reflect the rock composition and structure of each stage. Firstly, based on logging data, this paper analyzes the evolution laws of strain energy such as elastic properties, pre-peak dissipation energy, and post-peak fracture energy during the transition of rock materials from plastic deformation to brittle fracture in an energy perspective, and determines the key energy that affects the brittle characteristics of rocks. Secondly, a brittleness index evaluation approach has been established that can comprehensively reflect the mechanical properties of rocks during pre-peak deformation and post-peak damage stages. In addition, this article focuses on the impact of reservoir stratigraphic environment by combining the influence of geo-stresses with the rock brittleness index, and proposes a new method for evaluating reservoir fracability. Finally, this paper conducts a study on the fracability evaluation of three wells in a gas storage facility in eastern China. The results indicate that low modulus and fracability coefficient are beneficial for fracturing, thereby improving the gas production and peak shaving ability of gas storage.

The meaning of a good social outcome in land use transport policy/planning has been relatively underdeveloped, compared to economic and environmental sustainability goals, but this is now changing. Cities are increasingly prioritizing reducing social exclusion, with the allied intent of providing all residents with equitable access to the benefits of their city. However, in jurisdictions that use cost-benefit analysis to guide government decision-making, this poses a challenge: monetization of the benefits of reducing social exclusion is poorly developed. An evaluation gap thus confronts benefit-cost based assessment of initiatives intended to reduce social exclusion, compared to initiatives directed towards societal economic and environmental goals. This is a particular problem for public transport services that primarily enable people at risk of mobility-related social exclusion to access more opportunities in their society (social transit). The benefits of reducing social exclusion associated with these services have not been monetized, so social transit initiatives are poorly placed to argue their merits against competing initiatives where benefit monetization is more advanced (e.g., mass public transport and roads). The paper summarizes Australian research that has developed monetized measures for the value of increased trip making, bridging/bonding social capital, sense of community and several conceptions of wellbeing, and of reducing neighbourhood disadvantage, as these contribute to reducing social exclusion. New Singaporean research on the value of trip making to support reduced exclusion is also presented, affirming the Australian trip values. Trip values are then used in case study examples to show they can make a material difference to the societal worth of initiatives intended to reduce exclusion. Using these trip values, and other pathway values linked to reducing social exclusion, closes or at least substantially reduces the evaluation gap confronting social goal achievement in land use transport policy and planning, strengthening the case for reducing exclusion. These values will assist jurisdictions that are seeking to provide their residents with more equitable access to the benefits of their city.

Contemporary diagnostic practice in psychiatry relies on the tick-box approach of diagnostic manuals. In light of the obvious limitations of diagnostic systems, narrative formulations, whether in the form of biological, psychodynamic or behavioural cognitive ones, have been proposed. Their approach, which can be caricatured as one of drawing arrows, enriches our clinical tools and practice but in their explicitly theoretical orientation, as well as expanding the field of discovery, they also constrain it. In two previous papers I summarized the resulting limitations, with specific reference to the patient’s experience and proposed further enriching clinical perspicacity by attending to images and parataxis. The specific intent of attending to the patient’s experiences through a process that explicitly eschews narrativization, but allows clinical phenomena to “hang loose”, is to facilitate a process of clinical discovery and healing through practices of co-production between patient and clinician. In the present paper, I expand the range of phenomena that may assist in this co-production through adding attention to dreams to that of images and parataxis. In particular, I turn to the work of the Italian novelist Guido Morselli. Morselli agrues that the self is created through bundling experiences together through acts of “will” in order to establish our personal narrative. In doing so, however, the “will” forbids access to phenomena that do not fit the dominant narrative. Experience is therefore impoverished. Dream consciousness is a type of consciousness not harnessed by the constraints of narrativity. It allows a slipping of the narrative vigilance which bundles phenomena together to create a coherent narrative and thus offers a richer menu of potential experiences, including “bizarre” images that can serve to challenge our usual self-narrative and offer a new perspective on ourselves.

Estimating the Remaining Useful Life (RUL) of aircraft engines holds a pivotal role in enhancing safety, optimizing operations, and promoting sustainability, thus being a crucial component of modern aviation management. Precise RUL predictions offer valuable insights into an engine’s condition, enabling informed decisions regarding maintenance and crew scheduling. In this context, we propose a novel RUL prediction approach in this paper, harnessing the power of Bi-directional LSTM and Transformer architectures, known for their success in sequence modeling, such as natural languages. We adopt the encoder part of the full Transformer as the backbone of our framework, integrating it with a self-supervised denoising autoencoder that utilizes Bidirectional LSTM for improved feature extraction. Within our framework, a sequence of multivariate time series sensor measurements serves as the input, initially processed by the Bidirectional LSTM autoencoder to extract essential features. Subsequently, these feature values are fed into our Transformer encoder backbone for RUL prediction. Notably, our approach simultaneously trains the autoencoder and Transformer encoder, different from the naive sequential training method. Through a series of numerical experiments carried out on the C-MAPSS datasets, we demonstrate that the efficacy of our proposed models either surpasses or stands on par with that of other existing methods.

The prevalence of depression and anxiety among healthcare workers (HCWs) during the Covid-19 pandemics is high. The aim of the study is to identify the importance of self-esteem and occupational factors in association with the incidence of depression and anxiety among HCWs through a longitudinal cohort study during the Covid-19 pandemics in Latvia. Participants were interviewed repeatedly seven times during the Covid-19 pandemics. 322 participants were included in the data analysis for depression and 352 for anxiety. Low self-esteem and working in the general practitioner's office is associated with the incidence of depression and anxiety. Undergraduate education and direct contact with Covid-19 patients are associated with the incidence of depression. The risk of anxiety decreases by 1% each year among HCWs. Our study shows the importance of personality factors of HCWs during the Covid-19 pandemics.

Irrigation and fertilization are indispensable links in the jujube planting industry in southern Xinjiang, China. However, the water and fertilizer integration effects on jujube growth and fruit quality remain unclear. A two-year water and fertilizer optimization coupling test was conducted to determine the optimal water- and nutrient-supply scheme. The three-factor randomized block experiment included water (W), nitrogen (N), and phosphorus (P). According to the principal component analysis of each index, each treatment’s comprehensive score was obtained. Using yield and economic regression models, the theoretical value and yield value of the optimal economic benefit are inferred. When W, N, and P were applied together, the fruit quality and yield of each treatment significantly differed, and the vitamin C, soluble sugar, and sugar–acid ratio increased significantly with an increase in nitrogen fertilizer. However, the titratable acid decreased. An increase in irrigation and nitrogen application significantly increased fruit yield. The comprehensive score was the highest in the N3P3W2 treatment, which improved fruit quality, and the lowest in the N4P3W2 treatment. When the amounts of N, P, and W were 275.56 kg·hm-2, 413.66 kg·hm-2, and 7278.19 m3·hm-2, respectively, the theoretical economic benefit was the best. The N4P3W2 treatment is the optimal treatment.

The contemporary landscape of education is witnessing a paradigm shift towards innovative instructional methods, with the flipped learning approach gaining considerable attention. The purpose of this research was to investigate the impact of the flipped learning approach on students' perception and acceptance throughout an entire semester in the 'Introduction to Programming with Java' course, using a research design with a quantitative approach, ultimately aiming to inform educational practice and advance our knowledge of innovative teaching methods in higher education. This study was conducted at a university with 174 students involved, divided into two groups, 87 students in the experimental group and 87 students in the control group. The data collected through the scales were analyzed by using descriptive and inferential statistical analysis techniques in statistical software. At the end of the measurements, the technology acceptance level and self-directed learning perceptions of engineering students who received education with flipped learning were high. The results suggest that educators should consider students' readiness for self-directed learning when implementing the flipped learning approach and focus on creating an environment that supports their autonomy and engagement. This research offers valuable guidance for instructors, curriculum designers, and educational policymakers seeking to enhance the effectiveness of flipped learning in higher education courses.

Matter grows and self-assembles to produce complex structures such as virus capsids, carbon fullerenes, proteins, glasses, etc. Due to its complexity, performing pen-and-paper calculations to explain and describe such assemblies is cumbersome. Many years ago, Richard Kerner presented a pen-and-paper path integral approach to understand self-organized matter. Although successfully addressed many important problems including the yield of fullerene formation, the glass transition temperature of doped chalcogenide glasses, the fraction of boroxol rings in B2O3 glasses, the first theoretical explanation for the empirical recipe of window and Pyrex glass and the understanding of virus capsid self-assembly, still is not the primary choice when tackling similar problems. The reason lies in the fact that it diverges from mainstream approaches based on the energy landscape paradigm and non-equilibrium thermodynamics. In this context, a critical review is presented, demonstrating that the Richard Kerner method is, in fact, a clever way to identify relevant configurations. Its equations are simplified, common physical sense versions to those found in the energy landscape kinetic equations. Subsequently, the utilization of equilibrium Boltzmann factors in the transition Markov chain probabilities is analyzed within the context of local two-level energy landscape models kinetics. This analysis demonstrates that their use remains valid when the local energy barrier between reaction coordinate states is small compared to the thermal energy. This finding places the Richard Kerner model on par with other more sophisticated methods and, hopefully, will promote its adoption as an initial and useful choice for describing the self-agglomeration of matter.

Advances in biomimetic triboelectric nanogenerators (TENGs) have significant implications for electronic skin (e-skin) and human-machine interaction (HMI). Emphasizing the need to mimic complex functionalities of natural systems, particularly human skin, TENGs leverage triboelectricity and electrostatic induction to bridge the gap in traditional electronic devices' responsiveness and adaptability. The exploration begins with an overview of TENGs' operational principles and modes, transitioning into structural and material biomimicry inspired by plant and animal models, proteins, fibers, and hydrogels. Key applications in tactile sensing, motion sensing, and intelligent control within e-skins and HMI systems are highlighted, showcasing TENGs' potential in revolutionizing wearable technologies and robotic systems. This review also addresses the challenges in performance enhancement, scalability, and system integration of TENGs. It points to future research directions, including optimizing energy conversion efficiency, discovering new materials, and employing micro-nanostructuring techniques for enhanced triboelectric charges and energy conversion. The scalability and cost-effectiveness of TENG production, pivotal for mainstream application, are discussed along with the need for versatile integration with various electronic systems. The review underlines the significance of making bioinspired TENGs more accessible and applicable in everyday technology, focusing on compatibility, user comfort, and durability. Conclusively, it underscores the role of bioinspired TENGs in advancing wearable technology and interactive systems, indicating a bright future for these innovations in practical applications.

Self-compacting concrete (SCC) is a high-quality construction solution combining high fluidity, passing and filling ability with improved mechanical properties and durability. In the present study, the effect of incorporating alternative waste materials, such as two by-products of the ce-ment industry, namely cement kiln dust (CKD) and by-pass dust (BPD), into SCC as partial re-placement for traditional filler material was investigated. The produced compositions were compared with reference mixtures containing only marble powder (MP) as a filler. A series of tests including specific test methods for wet SCC, compressive, flexural and tensile splitting strength tests as well as drying shrinkage determination were conducted to evaluate the quality of the produced SCC in terms of fresh and hardened SCC properties. The use of alternative fine filler materials resulted in a high-performance sustainable SCC of low cement content. Specifi-cally, incorporating CKD into the SCC enhanced its rheological behavior and improved slightly its mechanical properties, while the use of BPD led to SCC mixtures of adequate rheological characteristics but with highly upgraded mechanical and physical properties