This study used Dutch potatoes at the end of dormancy as the material to explore the impact of menthol (0.2 and 0.5 g/kg based on potato mass) treatment on sprouting inhibition and potato quality. The findings revealed that a menthol concentration of 0.5 g/kg effectively inhibited potato tuber sprouting and significantly reduced glucoside alkaloids production. After a storage period of 15 days, the sprouting percentage and glucoside alkaloids content of potatoes treated with 0.5 g/kg menthol were observed to be significantly lower at 4.17% and 68.63 mg/kg, respectively, compared to the control group which exhibited values of 100% and 282.01 mg/kg, respectively (P < 0.05). Throughout the storage period, 0.5 g/kg of menthol promoted respiration, reduced malondialdehyde production in potatoes, inhibited polyphenol oxidase activity, and slowed down tissue browning. Additionally, it mitigated the decline in starch and soluble protein content, inhibiting the accumulation of reducing sugars.

This study focused on evaluating the potential of natural fermentation of pea flour (F) to improve the release of antioxidant compounds. Two fermentation conditions of F were performed: 1: 36.4% w/w, 24 h, 30°C (FF1); 2: 14.3% w/w, 24 h, 37°C (FF2); pH values decreased to 4.4-4.7, with a predominance of lactic acid bacteria. An increment of the proteolysis degree (TNBS method) (greater for FF2), polypeptides aggregation and decrease of solubility, increase of &lt; 2 kDa peptides, and increase in the ORAC potency of PBS-soluble fractions after fermentation was demonstrated. After simulated gastrointestinal digestion (SGID, COST-INFOGEST), FF1D and FF2D showed greater proteolysis degrees (63 and 53%) than F1D and F2D (45%), with differences in the molecular composition of the different digests. ORAC and HORAC potencies increased in all cases. FF2D presented the greater ORAC value, with higher activities for &gt; 4 kDa, some in the range 2 to 0.3 kDa. and &lt; 0.10 kDa fractions. Fermentation also increased the 60 % ethanol extracted phenolic compounds, mainly flavonoids, and the ORAC activity. After SGID, the flavan-3-ols disappeared but some phenolic acids increased respect to F. Fermentation in condition 2 was considered the most appropriate to obtain a functional antioxidant ingredient.

Passivating the grain boundaries is completely very crucial to achieve high power conversion efficiency in halide PSCs.

This research investigates the perceptions of parents belonging to the Sidama ethnic group re-garding the significance of technology in early childhood education. The study aims to elucidate how parents perceive the role of technology, such as digital devices and educational applications, in the education and development of their young children. Through qualitative interviews con-ducted with 30 parents and thematic analysis, the study uncovers diverse perspectives, shedding light on cultural, socioeconomic, and educational factors influencing parental attitudes towards technology in early childhood education among the Sidama people. Findings indicate a spectrum of views ranging from enthusiastic embracement to cautious reservation, revealing nuanced considerations that inform parental decisions regarding technology integration in their children's learning experiences.

This study presents a comprehensive investigation into the spectrum and determinants of child abuse and neglect in Nkpor-Uno, a community in Anambra State, Nigeria. Through a descriptive surveys design, the study explores various forms of abuse and neglect experienced by children, as well as the underlying factors contributing to these phenomena. The population for the study consisted of 1000 parents/ caregivers who are residents of Nkpor-uno. The sample for the study consisted of 100 respondents, purposive sampling techniques was used for the study. The questionnaire was a self-designed structured questionnaire. Data collected were analyzed using frequency, mean and standard deviation. Findings reveal alarming prevalence rates of child maltreatment, including physical, emotional, sexual abuse, and neglect. Socioeconomic factors such as poverty, parental substance abuse, family dynamics, and inadequate sex education emerged as significant contributors to child maltreatment. The study underscores the urgent need for targeted interventions and support systems to address the root causes of abuse and neglect and safeguard the well-being and development of children in Nkpor-Uno. By raising awareness, enhancing access to resources, and promoting positive parenting practices, we can strive towards building a safer and healthier environment for children, ensuring they are protected from harm and given the opportunity to thrive.

Keywords: grape pomace extracts, encapsulation, freeze-drying, bioaccessibility, phenolic compounds

The Yb/Al multilayer films exhibit excellent theoretical reflectivity in the 54-90nm wavelength range. This study attempted to incorporate 1.5% wt.% of Si impurities into Al to suppress the crystallization of Al, reduce interfacial roughness, and enhance the actual reflectivity of the prepared Yb/Al multilayer films. The internal microstructure changes of the film layers before and after Si impurity doping were investigated using GIXRR, AFM, and XRD techniques. The reflectivity of two types of multilayer films, Yb/Al(1.5wt.%Si) and Yb/Al(pure), was tested to evaluate the effect of Si impurity on the film performance.

Enhancing the Efficiency of Natural Gas Liquid (NGL) Extraction and Fractionation Trains: An Integrated Approach of Simulation Analysis, Advanced Modifications, and Technological Advancements. Through comprehensive research, innovative solutions such as the heat pump aided distillation (HPAD) system and self-heat recuperation technology (SHRT) have been developed to significantly reduce the energy consumption associated with conventional distillation systems. To identify a practical system for NGL fractionation trains, this study extensively examined and compared various HPAD and SHRT options to retrofit a single column. The objective was to find the most suitable and efficient solution for the fractionation process of natural gas liquids (NGLs). The retrofit options analyzed in this study encompassed a range of techniques, including vapor compression (VC), mechanical vapor re-compression (MVR), thermal vapor re-compression (TVR), bottom flashing (BF), side heat exchanger (SHE), intermediate heating and cooling (IHC), self-heat recuperative (SHR), and modified self-heat recuperative (MSHR) distillation. These methods were carefully examined to determine their suitability and effectiveness in improving the performance of NGL fractionation trains.In this study, a depropanizer column, typically employed in conventional NGL plants, was selected as a case study. The simulation software Aspen HYSYS V7.3 was employed to model and analyze eight retrofit designs based on predefined criteria. The simulation data was carefully evaluated to identify the most efficient design for minimizing energy consumption. Among the retrofit options, the mechanical vapor re-compression (MVR) technique demonstrated the most significant energy cost reduction, with a remarkable 68.11 percent improvement compared to the base case conventional column. These findings highlight the potential of MVR as an effective solution for lowering energy costs in NGL fractionation trains.Following the MVR retrofit option, the study found that vapor compression (VC) achieved a considerable energy cost reduction of 66.65 percent, closely followed by modified self-heat recuperative (MSHR) at 64.02 percent, bottom flashing (BF) at 62.88 percent, self-heat recuperative (SHR) at 55.85 percent, side heat exchanger (SHE) at 54.23 percent, intermediate heating and cooling (IHC) at 39.54 percent, and thermal vapor re-compression (TVR) also at 39.54 percent. These findings highlight the significant potential for energy savings offered by these retrofit options, with VC being the most popular choice, closely followed by MSHR, BF, SHR, SHE, IHC, and TVR.

Naturally fermented dairy products are an important component of the human diet. They are a valuable source of nutrients as well as vitamins and minerals. Their importance as a source of probiotic bacterial strains should not be overlooked. A number of studies highlights the positive effects of species of the Lactobacillacea on the intestinal microbiota, the overall homeostasis of the body, as well as a complementary treatment for some diseases. However, data on the effects on intestinal epithelial cells of postmetabolites released by bacteria are incomplete. This is likely due to the fact that these effects are species and strain specific. In the present study, we investigated the effects of postmetabolites produced by a pre-selected candidate probiotic strain Limosilactobacillus fermentum on HT-29 intestinal epithelial cells. Our data showed a pronounced proliferative effect, evaluated by flow cytometry, quantification of cell population, and determination of mitotic index. This was accompanied by stabilization of the cell monolayer, measured by increase of TEER (trans epithelial electric resistance) and reorganization of actin filaments. The data obtained are a clear indication of the positive effects, that the products secreted by L. fermentum strain 53 have on the intestinal epithelial cells.

(1) Background: Until December 2021, French Guiana (FG), located in South America, faced four consecutive COVID-19 epidemic waves. This study sought to analyze the mortality trend of severe COVID-19 patients admitted to the referral ICU of FG. (2) Methods: We conducted a prospective, observational, and non-interventional study in ICU at Cayenne Hospital. We included 383 patients older than 18 admitted with SARS-CoV-2-related pneumonia hospitalized from May 2020 to December 2021. The study covers three periods. Period 1 (Waves 1 and 2, original variant), period 2 (Wave 3, gamma variant), and period 3 (Wave 4, delta variant). (3) Results: The median age was 63 years (52-70). Frailty was diagnosed in 36 patients over 70 (32.4%). Only 4.8% of patients were vaccinated. The median ICU LOS was 10 days (6-19). Hospital mortality was 37.3%. It was 30.9% in period 1, 36.6% in period 2 (p=0.329 vs. period 1), and 47.1% in period 3 (0.015 vs. period 1). In multivariate analysis, independent factors associated with hospital mortality were age more than 40 years (]40-60 years] OR=5.2, 95%CI: 1.4-19.5; (]60-70 years] OR=8.5 95%CI: 2.2-32; (]70+ years] OR=17.9, 95%CI: 4.5-70.9), frailty (OR=5.6, 95%CI: 2.2-17.2), immunosuppression (OR=2.6, 95%CI: 1.05-6.7), and MV use (OR=11, 95%CI: 6.1-19.9). This model had an overall sensitivity of 72%, a specificity of 80.4%, a positive predictive value of 68.7%, and a negative predictive value of 82.8%. (4) Conclusions: The mortality of severe COVID-19 patients in French Amazonia was higher during the delta variant wave. This over-death is explained by the virulence of the responsible SARS-CoV-2 variant and the under-vaccination coverage of the studied population.

Culture signifies the customs, language, ceremonies, Indigenous Medical Knowledge (IMK) and other material objects of a tribe. These and many other features are a representation of identity for many Zambian communities. IMK practices are skills inherent by certain individuals in a tribal grouping who are chosen by the spirits (gods) or trained by those who practice. This intrinsic skill is in danger of diminishing as a result of modern medication. This article attempts to understand the role of traditional healers (also known as asing’anga in local language) in preservation of IMK in Chibombo District of Zambia. In so doing, the paper examined methods of preservation used by asing’anga and the challenges faced. Using hermeneutic phenomenology and linear snowball sampling, findings revealed that preservation was done through training. The study found unwillingness, expiration, and spirituality as challenges in the process of preserving IMK. The study recommended that the Lenje Cultural Association consider documenting and disseminating information to the local people by showcasing what is available in the Mukuni Culture Village Museum and Library. This was seen as a way through which many youths would be encouraged to appreciate the indigenous values in their culture.

A new sustainable polypropylene terephthalate (PPT) coating was synthesized from recycled polyethylene terephthalate (PET) and applied on hydraulic concrete substrate to improve its durability. First step, PET bottles wastes were grinded and depolymerized by glycolysis using propylene glycol (PG), in a Vessel-type reactor (20–180 °C) to synthesize bis(2-hydroxypropyl)-terephthalate (BHPT), which was applied as coating to one-three layers on hydraulic concrete substrate, by brushing technique and polymerized (150 °C for 15 h) to obtain PPT. PET, BHPT and PPT were characterized by FT-IR, PET and PPT by TGA, and the PPT coatings by SEM (thickness), by ASTM-D3359-17 (adhesion) and by water contact angle (wettability). The durability of hydraulic concrete coated with PPT was studied by resist chloride ion penetration (ASTM-C1202-17), carbonation depth at 28 days (RILEM-CPC-18), and absorption water ratio (ASTM-C1585-20). The results demonstrated that the BHPT and PPT were synthetized (FT-IR), PPT had a similar thermal behaviour to PET (TGA); the PPT coatings had good adhesion to the substrate, with thicknesses of micrometric units; hydrophilic (similar to PET coatings), and the durability of hydraulic concrete coated with PPT (2-3 layers) improved (migration of chloride ions decreased, carbonation depth was negligible, and the absorption water ratio decreased).

Natural laterite fixed-bed column intercalated with activated carbon prepared from Balanites ae-gyptiaca (BA-AC) was used for As(III) removal from an aqueous solution. Investigations were carried out to solve the problem of column clogging which appears during water percolation through the column. Experimental tests were conducted to evaluate the hydraulic conductivity and the effects of various parameters such as grain size, bed height, and initial As(III) concentra-tion. The breakthrough increased from 15 to 85 h with the increase of the bed height from 20 to 40 cm, and decreased from 247 to 32 h with the increase of initial As(III) concentration from 0.5 to 2 mg/L. The permeability data showed that the fixed-bed column filled with laterites layers intercalated with activated carbon performs much better than the non-intercalated adsorbent col-umn. The Bohart-Adams model showed that increasing the bed height induced a decrease in kAB and N0 values. The critical bed depths determined using the bed depth service time (BDST) mod-el for As(III) removal were 15.23 and 7.98 cm for 1 and 20% breakthrough, respectively. The re-sults showed that the new low-cost filtration system, based on laterite layers alternated with BA-AC layers, could be used for the treatment of arsenic-contaminated water.

Electromagnetic (EM) waves, used for purposes such as geophysical characterization, impact properties to be measured. This paper describes the effects of radio frequency (RF) waves on the hydraulic conductivity of glass beads and natural sand. A series of tests were conducted using a customized, rigid-wall, cylindrical permeameter inside a resonant cavity made of Plexiglas covered with electrically conductive transparent films. Constant head ASTM-D2434 [1] tests were performed to measure the samples’ hydraulic conductivity. RF stimulation was performed using a magnetically coupled loop antenna at a constant frequency of 726 MHz and input power levels of 10, 25, 40, and 50 Watts. The hydraulic conductivity of both natural sand and glass-bead samples increased with RF stimulation. Furthermore, measurement of the electric-field component of RF waves was also performed to illustrate the pattern of the electric field as well as evaluate the RF impact on the hydraulic conductivity tests. The electric field was numerically simulated and validated against experimentally measured electric fields. A finite-difference numerical model was developed in MATLAB to analyze the seepage flow, which was then validated against the experimental results. An optimization scheme was then used to develop a governing equation for the RF impact on hydraulic conductivity.

We confirm that energy dissipation weighting provides the most accurate approach to determining the effective hydraulic conductivity (Keff) of a binary K grid. A deep learning algorithm (UNET) can infer Keff with extremely high accuracy (R2 > 0.99). The UNET architecture could be trained to infer the energy dissipation weighting pattern from an image of the K distribution with high fidelity, although it was less accurate for cases with highly localized structures that controlled flow. Furthermore, the UNET architecture learned to infer the energy dissipation weighting even if it was not trained on this information directly. However, the weights were represented within the UNET in a way that was not immediately interpretable by a human user. This reiterates the idea that even if ML/DL algorithms are trained to make some hydrologic predictions accurately, they must be designed and trained to provide each user-required output if their results are to be used to improve our understanding of hydrologic systems most effectively.

Hydraulic conductivity is the key and one of the most uncertain parameters in groundwater modeling. The grid based numerical simulation require spatial distribution of sampled hydraulic conductivity at un-sampled locations in the study area. This spatial interpolation has been routinely performed using variogram based models (two-point geostatistics methods). These traditional techniques fail to capture the complex geological structures, provides smoothing effects and ignore the higher order moments of subsurface heterogeneities. In this work, a multiple-point geostatistics (MPS) method is applied to interpolate hydraulic conductivity data which will be further used in WASH123D numerical groundwater simulation model for regional smart groundwater management. To do this, MPS need ‘training images (TIs) as a key input. TI is a conceptual model of subsurface geological heterogeneity which was developed by using concept of ages, topographic slope as an index criteria and knowledge of geologist. After considerations of full physics of study area, an example shows the advantages of using multiple-point geostatistics compared with the traditional two-point geostatistics methods (such as Kriging) for the interpolation of hydraulic conductivity data in a complex geological formation.

In the paper is described the control electronics for an industrial pneumatic – hydraulic system based on a low-cost PLC. The developed system is a hydraulic pulse system and it generates series of high pressure hydraulic pulses (max. 200 bar). We describe requirements, an overall concept of the embedded control system, user interface, security features and network connectivity. In the description of the software solution we describe implementation of hierarchical ordered program threads (multithreaded program) and main control state machine. At the conclusion, we describe the calibration method of the system and calibration curves and we present the schematic diagram and a photo of a functional prototype of the system.

Flooding and overflows are recurring problems in several Brazilian cities, which usually undergo disorderly development. Their causes vary from increased impervious surface areas, deficiency/inefficiency of drainage structures and their maintenance, siltation of rivers, channel obstructions, and climatic factors. This situation is aggravated in the major cities. The Anhangabau watershed lies in the central portion of the city of Sao Paulo – Brazil and covers a drainage area of 5.4 km². The region is highly urbanized and crossed by a major north-south road connection. During heavy rain events, portions of this interconnection passage become compromised, disrupting the flow of vehicles, creating a chaotic situation for the population, as well as losses to the national economy. Observed rainfall records and an existing IDF (intensity duration frequency) curve for the region are used to obtain design storms. To account for climate change, a well know procedure, the equidistance quantile matching method for updating IDF curves under climate change, was applied to the existing historical data. Several different global climate models (GCM) and one regional model were applied to obtain and update rainfall design storm. The GCMs and future scenarios used were from the IPCC Assessment Report 5 (AR5) and two future projections: RCP (representative concentration pathway) 4.5 and 8.5. Alternatives previously proposed to solve to flooding issue are briefly reviewed. On one of the latest studies [1], a few modern concepts of water resources management are presented, and the linear retention measure was found to offer higher potential to mitigate the flooding problem in the lower valley of the watershed. Therefore, this alternative was used to evaluate different design storms scenarios combined with return periods of 25 and 100-years as well as the updated IDF under climate change for RCP 4.5 and RCP 8.5. To model the complex network, representing both road and drainage systems and their interconnections, PCSWMM/SWMM software was applied. Results are presented as flooding maps and show the impacts of the proposed linear retention measure based on the existing IDF curves and the updated IDF curves under climate change for two different drainage system conditions, current and improved with the use of linear retention reservoirs. Results show that the prosed changes on the drainage system help reduce the risk and damage to flooding. The climate change scenarios, however, impose a significant threat and need immediate attention from city planners and stakeholders.

Moisture and thermal are the key factors for influencing methane desorption during CBM exploitation. Using high pressure water injection technology into coalbed, new fractures and pathways are formed to methane transport. It is existed a phenomenon of water inhibiting gas flow. This study is focused on various water pressures impacted on gas adsorbed coal samples, then the desorption capacity could be revealed under different conditions. And the results are shown that methane desorption capacity was decreased with water pressure increased at room temperature and the downtrend would be steady until water pressure was large enough. Heating could promote gas desorption capacity effectively, with the increasing of water injection pressures, the promotion of thermal on desorption became more obvious. These results are expected to provide a clearer understanding of theoretical efficiency of heat water or steam injection into coalbed, they can provide some theoretical and experimental guidance on CBM production and methane control.

Small and micro hydropower represents an attractive solution for electricity generation, with low cost and low environmental impact. The pump-as-turbine (PAT) approach has promise in this application owing to its low purchase and maintenance costs. In this paper, a new method to predict the inverse characteristic of industrial centrifugal pumps is presented. This method is based on results of simulations performed with commercial three-dimensional CFD software. Model results have been first validated in pumping mode using data supplied by pump manufacturers. Then, results have been compared to experimental data for a pump running in reverse condition. Experimentation has been performed on a dedicated test bench installed in the Department of Civil Construction and Environmental Engineering of the University of Naples Federico II. Three different pumps, with different specific speeds, have been analyzed. Using the model results, the inverse characteristic and the best efficiency point have been evaluated. Finally, results of this methodology have been compared to prediction methods available in the literature.

To understand the mystery of final unification, in our earlier publications, we proposed that, 1) There exist three atomic gravitational constants associated with electroweak, strong and electromagnetic interactions; and 2) There exists a strong interaction elementary charge (e_s) in such a way that, it's squared ratio with normal elementary charge is close to inverse of the strong coupling constant. In this context, starting from lepton rest masses to stellar masses, we have developed many interesting and workable relations. We noticed that, electroweak field seems to be operated by a primordial massive fermion of rest energy 585 GeV. It can be considered as the zygote of all elementary particles and galactic dark matter. Proceeding further, with a characteristic fermion-boson mass ratio of 2.27, quarks can be classified into quark fermions and quark bosons. Considering strong charge conservation and electromagnetic charge conservation, fractional charge quark fermions and quark bosons can be understood. Quark fermions that generate observable massive baryons can be called as Fluons. Quark bosons that generate observable mesons can be called as Bluons. By considering a new hadronic fermion of rest energy 103.4 GeV, rest masses of fluons and bluons can be estimated and there by baryon masses and meson masses can be estimated.

(1) Background: The lateral arm flap has been the very useful choice in the reconstruction of small- to medium-sized defects like hand, extremity, oral head and neck area reconstructions. Its versatile characteristics and surgical feasibility allow this flap to be widely applied, but the reconstructive potential in facial subunit after tumor ablative procedures has never been reported. In this study, we aimed to utilize the advantages of the flap to treat facial temple subunit defect reconstruction. (2) Methods: Between 2020 and 2023, 12 patients underwent temple reconstruction with lateral arm free flaps after malignant tumor wide excision. There were 7 women and 5 men, and the mean patient age was 60.6 years old. Among the patients with cancer, 6 had squamous cell carcinoma, 5 had basal cell carcinoma and 1 had myxofibrosarcoma. All the flaps were elevated under general anesthesia. Aloprostadil(PGE1, Eglandin®) were administered postoperatively. (3) Results: All the flap types were fasciocutaneous type with varied sizes from 3 × 4 to 5 × 7 cm (Average size of flap 22.7cm2) were utilized. The average pedicle length was 6.1cm. The versatility of the lateral arm flap enabled successful coverage of all cases with no specific complications. Good functional outcome and range of motion in the recipient arm were obtained after surgery. (4) Conclusion: The authors successfully verified the advantages of lateral arm flaps in the treatment of medium sized facial subunt temple defect reconstruction.

Background: Self-harm (SH) refers to self-injury or intentional self-poisoning with varying degrees of suicidal intent and is a major public health issue for children and adolescents (C&A) worldwide. Given significant gaps exist in our understanding of the associated psychopathology in C&A, this paper outlines the protocol for a prospective clinical study examining risk factors of SH and additional candidate parameters (not routinely assessed) during an acute SH episode. Methods: The EXPAAND (EXploring Psychiatric and Attentional risk-factors in Adolescents Needing intervention for Deliberate self-harm) is a randomised control trial to assess additional novel candidate risk factors for SH in C&A and to evaluate the effectiveness of SH-targeted brief psychological intervention (Therapeutic Assessment (TA)), within a real-world acute clinical setting, as we include neurodiversity and gender diversity in this study. EXPAAND is conducted in 4 phases: (i) recruitment & randomisation; (ii) extended assessment; (iii) randomised intervention; and (iv) follow-up observational period to ascertain clinical outcomes for comparison. Expected Results: We envisage that by diagnosing and treating attentional disorders when detected will mitigate potential confounding effects of these conditions. We also expect that SH-focused TA will be effective in reducing subsequent SH and in improving engagement in follow-up and subsequent treatments.

This study provides a comprehensive comparison of the Peter Chew Sum method and Newton's Sum in Quadratic Root Function Computations. Both methods offer significant advancements by alleviating the need for memorization of multiple formulas. However, when confronted with higher-order quadratic root functions such as the calculation of power 33. Newton's Sum method proves cumbersome due to its requirement of all previous answers for final computation, leading to increased steps and error risks. In contrast, the Peter Chew Sum method simplifies the computational process by requiring only a few previous answers, resulting in a more straightforward series of operations. We contextualize our analysis within the historical progression of mathematical techniques, highlighting the transformative leap represented by the Peter Chew Sum method in quadratic root function computations. Peter Chew Sum addressing the limitations of Newton's Sum , especially concerning higher-order functions such as the calculation of power 256. Furthermore, study demonstrates that the innovative approach of the Peter Chew Sum method not only simplifies complex computations but also fosters enhanced conceptual understanding among students. In conclusion, study findings underscore the profound impact of the Peter Chew Sum method on quadratic root function computations.

This research follows the publication of recent scoping and systematic reviews of existing literature on vaccine literacy (VL), its relationship to vaccine hesitancy (VH), and associated variables, such as vaccination beliefs, attitudes, and behaviors towards immunization. In this review, 17 articles were selected, published between December 2022 and November 2023, in which VL tools were used, most of which support the notion of a negative association between VL and VH, although not confirmed by others. Moreover, the definitions of the variables under consideration were not homogeneous between studies, some aimed to evaluate the association of VL with vaccine confidence, while others were more focused on outcomes such as willingness to be vaccinated or vaccine uptake. The complexity of the factors underlying VL, and the heterogeneity of the methods applied in the studies, in particular the limitations of cross-sectional surveys, still make it difficult to have a comprehensive understanding of the role of VL. Therefore, it is important to develop future assessment tools that consider not just the measurement of psychological factors connected to the motivational aspect of VL, but also those related to knowledge and competencies. For this purpose, a theoretical framework is proposed, where the positioning of VL at the intersection between antecedents and beliefs/attitudes leading to behaviors explains why and how VL serves as a tool and a critical, direct, or mediating driver of vaccination choices, overcoming VH and increasing vaccination rates, operating at personal, as well as at organizational and community level.

The Yellow-legged Hornet (Vespa velutina nigrithorax) (YLH) is an invasive insect that arrived in Europe in 2004 and is now spread across nine countries. It is a threat to the native entomofauna and harmful to beekeeping and agriculture, as it is a ravenous predator of the European Honey Bee (Apis mellifera) and other pollinating species. Its expansion has been unstoppable and all resources are needed to fight against it, including native vertebrate predators. Among these, the European Bee-eater (Merops apiaster) (EBE) is a potential one, but little is known about its predation on YLH. In a study carried out in Portugal, remains of YHL were detected in EBE nesting sites, which to the best of our knowledge is the first such report. This means that this bird could be one more agent in the biological control of this pest (although research on predation intensity is still needed), in conjunction with other natural predators and other strategies. In the Iberian Peninsula both species are allopatric in vast regions, so the role of EBE may be more limited. However, in the rest of Europe, at a country or continent scale, the scenario may be different and sympatry may occur to a greater extent.

This study uses the social impact theory to analyse consumer behaviour amidst Covid-19. Fear of scarcity has changed consumer buying behaviour in crisis times such as the now abating global health crisis – i.e., Covid-19. The study asserts that the existing five-stage model of consumer purchasing decisions does not fit neatly in turbulent times. It proposes a shortened four-stage process of need recognition, purchase, ownership and satisfaction as a better and more adaptable fit. Cutting out information search and evaluation of alternatives in the old model, and replacing these with ownership, is where the main contribution of the study lies. The study has implications for managing the marketing mix as we know it. It asserts that not all the 4Ps of the marketing mix are important in crisis times.

The Suter curves for Wh and Wm characteristics of collected and the first time presented Four-quadrant (4Q) diagrams of 11 radial pump-turbine models with different specific speeds (nq=24.34, nq=24.8, nq=27, nq=28.6, nq=38, nq=41.6, nq=41.9, nq=43.83, nq=50, nq=56, and nq=64.04) are given in the paper, as well as the Suter curves for 2 pump models (nq=25, and nq=41.8) which were already published in the literature. These 11+2 curves were analyzed to establish a certain universal law of behavior in dependence on the specific speed. For the determination of existing laws in behavior, the fitting procedure using the Regression and Spline methods was used. The paper presents a research plan and structures that include: data collection of four-quadrant diagrams for models of pump-turbines and pumps with different specific speeds (nq), the procedure of recalculation of Four-quadrant diagrams of the models into Suter curves for Wh and Wm characteristics, the definition of the optimal point for the pump and turbine operating mode in pump-turbine models for different specific speeds, and developing numerical models in the MATLAB program to obtain the Universal Equation for the Wh and Wm characteristics. The scientific contribution of this paper is the firstly published original mathematical curve named Universal Equation for the Wh and Wm characteristics for radial pumps and pump-turbines. Application of the equation has been demonstrated at the pumping station where two radial pumps are installed. The calculation of transient processes was performed using the numerical model developed by the authors in the mathematical program MATLAB. Comparison of the transition process results has been made for the two cases - when input data in the numerical model have been firstly used with the values of Suter curves for Wh and Wm characteristics obtained by recalculation from the Four-quadrant operating characteristics (Q11, n11, M11) of model’s specific speed, and then secondly with the values of the Suter curves for Wh and Wm characteristics obtained from the Universal Equation.

Harnessing the Remarkable Bio-Remediation Potential of Vernonia spp. for the Sustainable Restoration of Hydrocarbon-Polluted Clay Soil in Ogoni Land, Nigeria This study explores the potential of utilizing Vernonia spp. for eco-friendly bio-remediation of hydrocarbon-polluted clay soil in Ogoni Land, Nigeria. The aim is to find a sustainable and effective solution that promotes the restoration of the polluted soil while minimizing the use of external additives. The process of bio-remediation can occur naturally, through natural attenuation or intrinsic bio-remediation. However, it has been observed that in certain cases, the addition of fertilizers, oxygen, or organic matter is required to enhance the effectiveness of bio-remediation. In this research, we focus on the bio-remediation potential of Vernonia spp., a native plant species known for its strong phytoremediation abilities. By harnessing the remarkable bio-remediation properties of Vernonia spp., we seek to restore the hydrocarbon-polluted clay soil in Ogoni Land in an environmentally friendly and sustainable manner. Our methodology involves conducting greenhouse experiments to assess the bio-remediation efficiency of Vernonia spp. in different soil conditions. We will analyze the soil's physical and chemical properties, as well as the degradation of hydrocarbons over time. The experimental results will provide valuable insights into the effectiveness of Vernonia spp. in removing hydrocarbon pollutants from clay soil. Through this study, we aim to develop a cost-effective and sustainable approach to restore hydrocarbon-polluted clay soil in Ogoni Land. By leveraging the natural bio-remediation potential of Vernonia spp., we can potentially reduce the reliance on external additives, thus minimizing the environmental impact associated with traditional remediation methods. The research article explores methods to promote the growth of pollution-eating microbes in order to enhance bio-remediation. Bio-remediation refers to the use of naturally occurring organisms to break down harmful substances into less toxic or non-toxic forms. In situ bio-remediation involves treating the contaminated material directly at the site, while ex-situ bio-remediation involves removing the contaminated material for treatment elsewhere. This study specifically investigates ex-situ bio-remediation techniques for hydrocarbon-contaminated clay soil. The researchers found that the application of room dry and wet blended bitter leaf showed promising results in the bio-remediation of hydrocarbons in the clay soil. Using Vernonia galamensis, a concentration as high as 0.55 ug/ml was achieved, while Vernonia amygdalina yielded a concentration as high as 0.67 ug/ml when applied at 35g and 40g respectively, based on the wet blended approach. These findings highlight the effectiveness of wet blended Vernonia species in the bio-remediation process.During the remediation process of the clay soil, the pH levels showed a trend of increasing from acidic to normal to alkaline. This can be attributed to the remediation of excessive metals present in the soil. After 40 days, the pH of the clay soil reached 6.97 when treated with 40 grams of Vernonia galamensis, and 7.00 when treated with 40 grams of Vernonia amygdalina. Interestingly, while the remediation efficiency of HC (hydrocarbon) decreased with increasing mass of Vernonia galamensis, the remediation efficiency of HC increased when using Vernonia amygdalina. These observations highlight the varying effects of different Vernonia species on hydrocarbon remediation.The highest remediation values were observed when using Vernonia galamensis at 35g and Vernonia amygdalina at 40g. These particular amounts of these Vernonia species demonstrated effective remediation of the targeted pollutants. However, in comparison to other metals, the remediation effects were relatively lower for zinc (Zn), with only approximately 0.25 ug/ml being remediated. This suggests that the remediation potential of the Vernonia species may vary depending on the specific contaminant.The higher remediation effects observed for Zn metal in the soil can be attributed to the wet blended preparation method of the Vernonia species. In contrast, the room dried Vernonia species exhibited the lowest performance in remediating the soil, with approximately 0.17 ug/ml and 0.10 ug/ml remediation for galamensis and amygdalina, respectively. Both Vernonia leaf extracts achieved a remediation of 0.5 ug/ml for chromium. The sun dried and room dried methods also showed considerable remediation potential, with values above 0.4 ug/ml. The level of significance for the model was attained at 0.05, and the r2 value was appreciable. These findings indicate the effectiveness of different preparation methods and Vernonia species in soil remediation

With reference to our earlier published views on large nuclear gravitational constant , nuclear elementary charge and strong coupling constant , in this paper, we present simple relations for nuclear stability range, binding energy of isotopes and magic proton numbers.

The analysis and simulation of water quality in distribution networks is a complex issue of great concern today. The analysis of the evolution of water age, as a simple indicator of water quality in the network, is of great interest in both design and operation phases. Understanding the factors that have the strongest influence on water quality is key to developing adequate strategies aimed at preserving it. This paper firstly analyses the factors with biggest influence in the tanks water age, to support the selection of the most appropriate configuration from the point of view of water quality during design phases. Then, the main considerations when modelling tanks following the different mixing models considered in Epanet have been presented. Also, a real tank behaviour has been characterised through field measurements and Epanet simulations in order to determine the best fitted mixing model.

The multi-objective optimization design of hydraulic climbing mechanism (the core mechanism of gantry crane) was realized by using the method of combining central composite design (CCD), Kriging and multi-objective genetic algorithm (MOGA). Firstly, the hydraulic climbing mechanism model was established and the appropriate design variables were selected. The mass, maximum deformation and maximum equivalent stress of the hydraulic climbing mechanism was taken as the optimization objectives. Through the comparative analysis of the parameters of wedge block, anchor block, anchor plate、baffle, the parameters that have the greatest impact on the optimization objectives are selected as geometric constraints. Then, according to the results of experimental design, Kriging model was used to establish the response surface optimization model of objective function. Finally, the optimal results were obtained by using MOGA method. The experimental results show that the optimization strategy is reliable, and the mass of the optimized model is reduced by 10.28%. While meeting the actual production requirements, the lightweight design of the hydraulic climbing mechanism is realized, which saves the design cost and improves the material utilization rate.

The development of cost-effective methods for estimating hydraulic conductivity profiles has been an ongoing effort in the field of engineering practice, which can be used to increase availability to clarify the hydrogeological complexity of fractured rock aquifers for the aid of solving groundwater-related problems. A methodology is presented, which combines electrical well logs, fluid conductivity logs, double packer hydraulic tests, Archie’s law, and the Kozeny-Carman-Bear equation to investigate relations between formation factor and hydraulic conductivity. This method was applied to develop hydraulic conductivity profiles based on the data collected from 88 boreholes in Taiwan's mountainous areas. The investigation results include: (1) Well logging signals were suggested to be categorized by rock types to establish effective relationships with hydraulic conductivity. (2) Removing the mud-bearing section data with two proposed data clustering techniques could effectively enhance the correlation between the formation factor and hydraulic conductivity. (3) The predictive models for estimating hydraulic conductivity have been developed for sandstone, schist, and slate. (4) The prevalence of clay content in most of Taiwan's mountainous rock formations has been found, which implies that careful consideration of clay-related issues in complex geologic formations is essential while applying Archie's law theory.

The stormwater drainage problem is one of the major challenges facing in Shire Endaslasse town, Ethiopia. In a town, Street flooding and overtopping drainage system problems are occurring during the rainy season. This causes ponding which poses difficulties in ease of transportation and it hinders the day-to-day activity of the people. So, the study focuses on the performance of the stormwater drainage system in Shire Endaslasse town using Arc GIS and SWMM5.1. For this study, the primary data were collected by field surveys and interviews with the council body. Simulation results for storm events show that in some of the drainage systems in different regions of Shire Endaslasse town have flooded. During the field observation, the drainage structures are filled with solid wastes, inadequate inlet and outlet structures and some of the top element of the manhole have been broken this may cause a problem of aesthetic and healthy at large it may increase flood risk. The flooding risk in the drainage systems is very high due to the drainage system is undersized to cope with the current rainfall rates, but also is very limited to face the upcoming predicted rainfall.

This study was conducted generally by aiming assessment of the hydraulic performance of water distribution systems of Addis Ababa Science and Technology University (AASTU). In line with the main objective, this study addressed, (1) pinpointing problems of existing water supply versus demand deficit (2) evaluating the hydraulic performance of water distribution system using water GEMS and (3) recommended alternative methods for improving water demand scenarios. The University’s water supply distribution network layout was a looped system and the flow of water derived by both gravity and pressurized system. The gravity flow served for the academic and administrative staffs whereas the pressurized system of the network fed the students dormitories, cafeteria’s etc. The study revealed the existence of unmet minimum pressure requirement around the student dormitories which accounts 25.64% below the country’s building code standard during the peak hour consumption. The result of the water demand projection showed an increment of 2.5 liter per capita demand (LPCD) in every five years. Hence, first, the university’s water demand was projected and then hydraulic parameters such as; pressure, head loss and velocity were modeled for both the existing and the improved water supply distribution. The finding of the study was recommended to the university’s water supply project and institutional development offices for its future modification and rehabilitation works.

The institutionalization of people with intellectual disabilities has been a common international response across cultures and generations that persists to this day. This chapter recounts its inheritance and manifestation in modern service provision. An institutional mind-set persists among clinicians and managers despite policies that emphasise the rights of persons with intellectual disability and anti-discriminatory practice. Alternative provision is rooted in person-centred practice; with a growing body of evidence for the improved quality of life that results from it. A reflective activity encourages readers to examine a recent case when they were associated with an institutional placement and what alternatives might have been sought. Yet alliances with other professionals, self-advocates and family carers will be needed to effect real and lasting changes in our service cultures and even then, the long shadows of institutional care may still persist.

This quantitative, predictive correlation study examined the factors influencing behavioral intentions to adopt blockchain technology in educational settings across the United States. Grounded in the unified theory of acceptance and use of technology (UTAUT2) model, the research investigated the impact of performance expectancy, effort expectancy, social influence, facilitating conditions, hedonic motivation, price value, and habit on intentions to use blockchain in education among IT officers. Data was collected from 160 participants through an online survey and analyzed using partial least squares structural equation modeling (PLS-SEM). The findings revealed that performance expectancy and social influence significantly predicted behavioral intentions towards blockchain adoption, while effort expectancy, facilitating conditions, hedonic motivation, price value, and habit did not exhibit significant relationships. Furthermore, behavioral intention emerged as a strong predictor of actual blockchain technology utilization in educational institutions. The study contributes to the burgeoning field by validating UTAUT2's applicability to blockchain acceptance in education and providing insights to drive strategic implementation approaches. However, limitations related to causality, measurement, generalizability, and sample size are acknowledged, paving the way for future research endeavors across diverse stakeholder groups, contextual factors, and longitudinal perspectives.

Objective To investigate nailfold capillary parameters in community-dwelling individuals aged over 60 years who have hypertension and do not exercise regularly. Furthermore, the study examined the correlations between capillary function and other health-related indicators. Design A single- center pilot trial Setting Faculty of Health, Tsukuba University of Technology, Japan Participants hypertensive community-dwelling elderly people Intervention Microcirculation was observed before and 1 min after arm-curl exercise by means microscopy of capillary with non-exercised limb. Additionally, we examined other health-related indicators. Outcome measures: Acute effects of reperfusion on nailfold density, flow, and diameters. Secondary outcomes included the correlations between microvascular parameters and other health-related indicators. We hypothesized that brief exercise could enhance microcirculation reperfusion and correlate with other health-related parameters.　 Results: There were 20 participants with a mean (SD) age of 67.1 (5.8) years. The capillary flow rate changed from 2.3±6.7 to 2.7±0.2 log µm/s (P

High-quality optical Fano resonances, which exist in a spherical dielectric microparticle in the spatial configurations of the "whispering-gallery modes" (WGMs) and recently are referred to as the “super-resonances”, possess extremal sensitivity not only to the micro-cavity size and shape but also to the optical properties of the particulate material. The increase in the power of light radiation coupling into a super-resonance can lead to the manifestation of strong optical nonlinearity of the resonator material due to the cubic nonlinearity (optical Kerr effect) and generation of free electron plasma in certain regions of the spherical microcavity. In fact, an optically linear medium of the resonance cavity transforms into a Drude-Kerr-type medium with a strong dependence on input laser intensity. With the help of the finite-elements numerical simulations, we theoretically analyze the transformations of the resonant contour for a number of high-quality WGMs excited in a lanthanum-glass microsphere exposed to an optical radiation of different intensity. We show that in a certain input intensity range, the competition of Kerr and plasma optical nonlinearities can stop and even reverse the Stokes shift of the super-resonance observed in a pure Kerr medium. Additionally, optical ionization and plasma generation within the mode volume significantly reduce the strength of the magnetic super-resonance and lead to its spoiling and frequency splitting.

Current artificial intelligence (AI) technology is still considered weak AI. However, the progression towards strong AI unavoidably involves grappling with concerns surrounding consciousness, the mind, and creativity. This paper focuses on analyzing consciousness, creativity, and the generation of emotions to explore the possibility of machine-based consciousness, creativity, and emotion. We believe that the emergence of consciousness relies on the complex interplay at different layers within a complex system, rather than wholly relying on the underlying substrates of the system. Thus, it is plausible to consider the existence of machine-based consciousness, creativity, and emotion. Furthermore, swarm intelligence should be recognized as a distinct form of intelligence. Human individuals serve as the foundational substrate enabling the realization of swarm intelligence, with individual intelligence reflecting the projection of swarm intelligence at the individual level. The advanced state of human civilization is primarily attributable to the effect of swarm intelligence. Building upon basic emotions to adapt to environmental conditions, advanced human emotions are a product of the evolutionary process by swarm intelligence. Emotions serve as a pivotal impetus for the formation and development of societies grounded in swarm intelligence. In pursuit of super-AI that surpasses human civilization in the future, nurturing swarm intelligence represents an inevitable trajectory.

The overcrowding of high-rise buildings in the city adversely affects the wind environment by changing the air currents in the surrounding areas. In particular, extreme climate phenomena caused by climate change are stronger and more frequent, causing social damages in cities. To comprehensively better understand the wind properties around high-rise buildings, actual filed measurement is necessary to determine the environment assessment of wind effect. We performed the on-site measurement on LCT residential complex regions (411.6m tall) with highly concentrated high-rise buildings in coastal city Busan, South Korea under extreme weather conditions such as typhoon invasions to determine wind fluid characteristics. In the field monitoring, five anemometers were installed to analyze the wind environment around high-rise buildings when typhoon 'Hinnamnor' invaded. Compared to the nearby weather station operated by KMA(Korea Meteorological Administration), the gust was 3.7 times stronger and the max 1 min-mean wind speed was 3.1 times stronger, and the characteristics of the downward wind and the canyon wind were shown depending on the location characteristics of the point. Turbulence intensity decreased as the wind speed increased and converged to a certain value. Likewise, the gust factor also decreased as the wind speed increased and converged to 2.0, which is considered to be the parameter that best represents the intensity of the instantaneous gust caused by the skyscraper wind effect.

This article describes a novel electrochemical on-chip biosensor that utilizes anti-PSA antibody (Ab) and silver nanoparticles (AgNPs) to enhance the sensing and detection capability of prostate specific antigen (PSA) in the blood. The AgNPs are prepared, characterized, and applied onto a silicon photonic on-chip biosensing receptor platform designed to enhance the accurate detection of PSA. The AgNPs were synthesized by a chemical reduction method using silver nitrate (AgNO₃) as the precursor. Transmission electron microscopy (TEM), selected area electron diffraction (SAED), energy dispersion X-ray spectroscopy (EDS), small angle X-ray scattering (SAXS), X-ray diffraction (XRD), and light microscopy were among the methods used in the characterization and analysis of the AgNPs. Each stage of the immunosensor fabrication was characterized using cyclic voltammetry. The proposed immunosensor was applied in the detection of PSA, a prostate cancer biomarker, with a high sensitivity and a limit of detection of 0.17 ng/mL over a linear concentration range of 2.5 to 11.0 ng/mL. The immunosensor displayed good stability and was selective in the presence of interfering species like immunoglobulin (Ig) in human serum, ascorbic acid (AA), and diclofenac (Dic). The detectivity and sensitivity are significantly higher than previous reports on similar or related technologies.

Introduction: Glomerulopathy is a term used to describe a broad spectrum of renal diseases, character-ized by dysfunction of glomerular filtration barrier, especially of podocytes. Several podocyte-associated proteins have been found and proved their usefulness as urine markers of podocyte dysfunction. Two of them are nephrin (NEP) and prodocalyxin (PDC). Purpose: This study aims to evaluate the association of podocyte damage, as it is demonstrated via the concentrations of urinary proteins, with clinical and histological data from patients with several types of glomerulonephritis. Methods: We measured urine levels of two podocyte-specific markers, NEP and PDC (corrected for urine creatinine levels), in patients with a wide range of glomerulopathies. Serum and urine parameters as well as histological parameters from renal biopsy were recorded. Results: In total, data from 37 patients with glomerulonephritis and 5 healthy controls were analyzed. PDC and NEP concentrations correlated between them and with serum creatinine levels (p=0.001 and p=0.013 respectively), and with histological lesions associated with chronicity index of renal cortex, such as severe interstitial fibrosis, severe tubular atrophy and hyalinosis (for PDC/NEP, all p3gr/24h with diffuse fusion of podocyte foot processes (p=0.016) was identified. Conclusions: Podocalyxin and nephrin concentrations in urine represent markers of podocyte dysfunction and in our study they were associated both with serum creatinine and histological chronicity indices.

The rise of the Internet has enabled people to express their opinions on various subjects through social media, blogs, and website comments. As a result, there has been a significant increase in research on sentiment analysis. However, most of the research efforts have focused on analyzing sentiment in English-language data, neglecting the wealth of information available in other languages. In this paper, we provide a comprehensive review of the current state-of-the-art in multilingual sentiment analysis. The survey investigates techniques for data preprocessing, representation learning, and feature extraction in multilingual sentiment analysis. It explores cross-lingual transfer learning, domain adaptation, and data augmentation methods that enhance the performance of sentiment analysis models, particularly in low-resource languages and domains. It provides insights into the state-of-the-art approaches, challenges, and opportunities in this evolving field and encourages further advancements in multilingual sentiment analysis research.

The paper presents the observational, remote sensing and model simulation to analyze Southern Brazil Antarctic Ozone Hole influence (SBAOHI) events occurred between 2005 and 2014. To an-alyze it we use Total Ozone Column (TOC) data provide by Brewer Spectrophotometer (BS) and OMI (Ozone Monitoring Instrument) instrument satellite, besides the AURA/MLS (Microwave Limb Sounder) instrument satellite ozone profiles was utilized with DYBAL (Dynamical Barrier Localization) code in MIMOSA (Modélisation Isentrope du transport Mésoéchelle de l’Ozone Stratosphérique par Advection) model Potential Vorticity (PV) fields. TOC has 7.0 ± 2.9 DU re-ductions average in 62 events. October have more events (30.7%). Polar Tongue events are 19.3% of total, being in October more frequently observed (50% of cases), with medium intensity (58.2%) and in stratosphere medium levels (55.0%). Already Polar Filament events (80.7%) are more frequent in September (32.0%), medium intensity (42.0%) and in stratosphere medium lev-els (40.7%). ENSO index positive phase influenced 61.3% of events, having dominance in all in-tensity categories (minor 57.9%, medium 51.6%, major 58.3%), while the equilibrium dominate the QBO influence with 50% of total cases in positive phase and 50 % in negative phase.

The present study explored whether exposure to complex childhood trauma (CCT) is reflected in the resting-state electroencephalography (EEG) temporal alpha power of complex trauma-exposed adolescents, given the association of temporal alpha with fear circuitry (learning and conditioning) in a sample of 25 adolescents and similar controls, ages 12-17 years. Both trauma and psychopathology were screened or assessed, and resting-state EEG was recorded, following a preregistered protocol for data collection. Temporal alpha power, corresponding to T5 and T6 electrode location (10-20 international system), was extracted from resting-state EEG in both eyes-open and eyes-closed conditions. We found that in the eyes-open condition, right, but not left, temporal alpha was significantly higher in adolescents exposed to CCT, relative to healthy controls, suggesting that childhood trauma exposure may have a measurable impact on alpha oscillatory patterns, specifically in the right temporal region. Our study highlights the importance of considering neural markers, such as temporal alpha power, in understanding the long-term consequences of CCT exposure in developmental samples, with possible important clinical implications in guiding neuroregulation interventions.

Verification of inclusivity of molecular detection methods gives indications on the reliability of viral infections diagnosis because of the tendency of viral pathogens to undergo sequence variation. This study was aimed to select inclusive probe based reverse transcription quantitative PCR (RT-qPCR) assays for the diagnosis of the most widespread and detrimental viruses infecting honeybees, namely the acute bee paralysis virus (ABPV), the black queen cell virus (BQCV), the chronic paralysis bee virus (CBPV), the deformed wing virus variants A (DWVA) and B (DWVB), and the sacbrood virus (SBV). Therefore, detection methods previously described were re-evaluated in silico for specificity and inclusivity. Based on this evaluation, selected methods were modified or new ones were designed and tested in duplex RT-qPCR reactions. The limits of detection (LODs), effect of multiplexing on sensitivity and viral RNA quantification potential in bees and hive debris were assessed. This study made available diagnostic assays able to detect an increased number of virus variants compared to previously described tests and two viral pathogens in a single PCR reaction.

Background This study aimed to identify the prominent risk factors that may trigger danger signals of early onset of vascular deregulation in T1D. The risk factors we have identified may serve as dual-purpose biomarkers of rapid diagnosis that offer prospective tailor-made resolution therapeutics. Methods The healthy control (HC) was compared with individuals diagnosed with T1D for the risk factors of vascular deregulation in published research studies from year 2013 to 2023. The PubMed, Web of Science and Google Scholar databases were searched from 1/1/2013 to 1/9/2023. The risk of bias was assessed with the Cochrane (ROBINS-I ) tool, which is relevant to clinical subjects. A random effect model for continuous data was followed and analysed by RevMan 5.4 and GraphPad Prism software. Results 80 relevant case-control studies having 5293 HC and 7492 T1D patients were included. The age and sex-matched HC consisted of persons free of disease and not under any medication while clinical subjects of all age groups were included. 28 risk factors were grouped into six primary outcome models, all of which favoured the T1D synonymous with a high risk of CVD. Conclusions Our findings have strong implications for improving the quality of life and health economics related to vascular disease in T1D. HbA1c% is the most effective biomarker, followed by FBG, LDL-C, and AI% which the clinicians could evaluate using a simple blood test or non-invasive techniques. (Protocol registered at https://www.crd.york.ac.uk/prospero/ CRD42022384636).

Coal bottom ash (CBA) is a byproduct of coal-burning power plants. This material can be used as a fine aggregate replacement in concrete to reduce global natural material depletion. Concrete usage is increasing rapidly; subsequently, the industry’s carbon footprint is increasing. Using CBA in the construction industry will reduce the technical and economic problems associated with power plants by reducing solid waste. This project aimed to determine if adding new sustainable materials, such as CBA, to concrete will reduce natural raw material usage, energy consumption, and greenhouse gas emissions while improving performance. This study included two projects: comparing increased CBA content to the two-control project and determining the optimum content based on the compressive strength. The optimum CBA content is 50%, which reduces fine aggregate usage in a concrete mix by 50% while maintaining equivalent or better concrete strength than a pure Portland concrete mix without CBA. The air content of the concrete mix containing % CBA decreased with increased CBA content and compressive strength, possibly due to the spacing factor of the voids in the mix and CBA’s porous and fineness behavior. The CBA optimum content had a unit weight lower than the controls for both projects, which makes the CBA mix a lightweight concrete. Using this material can significantly reduce natural material usage and environmental harm by reducing CBA waste disposal and improving concrete performance.

To facilitate the promotion and application of the whole process engineering consulting (WPEC) model, the transmission mechanism of influencing factors in WPEC's promotion and application is investigated. It identifies and categorizes the influencing factors within the framework of "external environment-project factors-stakeholders", systematically organizing and summarizing ten primary categories and thirty-eight secondary influencing factors of WPEC's promotion and ap-plication. Utilizing the complex network analysis method, a network of influencing factors in the promotion and application of WPEC is constructed. The network is then converted into three binary networks based on weight, which are subjected to structural analysis and motif analysis. On this basis, the transmission mechanism of influencing factors in WPEC's promotion and applica-tion and its causations are explored.

Thrombosis after severe acute respiratory syndrome coronavirus 2 vaccination is a serious complication in patients who have a thrombophilic predisposition. In this case, a female patient with no family history of thrombophilia who had pediatric antiphospholipid syndrome (APS) developed deep vein thrombosis (DVT) when she was 6 years old; 6 months after receiving a second dose of the BNT162b2 vaccine, DVT reoccurred. The original thrombi were found in the right common iliac vein and the inferior vena cava, with concomitant left pulmonary infarction. The patient was treated with anticoagulants for 6 years after DVT onset, with subsequent treatment cessation for 5 years without recurrence. She received the BNT162b2 vaccine at 17 years of age, 1 week before a routine outpatient visit. Platelet factor 4 elevation was detected 14 days after the first vaccination, persisting for 5 months without thrombotic symptoms. Six months after the second vaccine dose, the DVT recurred and was treated with a direct oral anticoagulant. The vaccine exacerbated the patient’s APS by activating coagulation, causing thrombosis recurrence. Platelet factor 4 levels may indicate coagulation status. When patients predisposed to thrombosis are vaccinated, coagulation status and platelet activation markers should be monitored to prevent DVT development.

Physical exercise is the greatest stress on the cardiovascular system, not only in humans but also in all vertebrates. Consequently, the cardiovascular response cannot be thought of as having only one "anthropocentric" interpretation. The modulation of cardiac output (Q) in response to exercise in the five major groups of vertebrates exhibits considerable variability. Moreover, the response of the heart rate (HR) and the stroke volume (SV), the fundamental factors that cause the rise in Q, is also highly variable. The difference in the range of HR is difficult to determine in many vertebrates, both at rest and at maximal effort. Additionally, the increase in SV varies among vertebrates. For example, while rainbow trout and leopards increase their SV by increasing end diastolic volume (EDV), humans do so at the expense of both increasing EDV and reducing end systolic volume (ESV). The variation in arterial pressure that arises during exercise varies notably among vertebrates, such as amphibians, whose blood pressure values do not increase as significantly as in mammals. Such differences in cardiovascular response among vertebrates may be linked to their habitat or living environment. This review aims to analyze the cardiovascular response of vertebrates to physical exercise as the most common stressor.

HIV incidence remains alarmingly high among female sex workers (FSWs) in low- and middle-income countries, with Uganda being no exception. The elevated risk of HIV transmission among this vulnerable population can be attributed to a complex interplay of factors, including engaging in sexual activities with multiple partners, inconsistent condom usage, substance use, and structural barriers, such as legal criminalization and pervasive stigmatization by healthcare providers. To combat this epidemic, various HIV prevention interventions have been devised, targeting these multi-faceted challenges. This study involved conducting focus groups among FSWs and healthcare providers in Uganda, with the overarching objective of informing the development of a tailored HIV prevention intervention aimed squarely at FSWs. Through these discussions, valuable insights were gained into FSWs’ perceptions of their HIV risk, their attitudes regarding HIV prevention strategies, and their recommendations regarding the content and delivery of future interventions.

Hox gene clusters are crucial in Embryogenesis. It was observed that some Hox genes are located in order along the telomeric to centromeric direction of the DNA sequence: Hox1, Hox2, Hox3…. These genes are expressed in the same order in the ontogenetic units of the Drosophila embryo along the Anterior-Posterior axis. The two entities (genome and embryo) differ significantly in linear size and in-between distance. This strange phenomenon was named Spatial Collinearity (SP). Later, it was observed that, particularly in the Vertebrates, a Temporal Collinearity (TC) coexists: first is Hox1 expressed, later Hox2 and even later Hox3,…,. According to a Biophysical Model (BM), pulling forces act at the anterior end of the cluster while a cluster fastening applies at the posterior end. Hox clusters are irreversibly elongated along the force direction. During Evolution, the elongated Hox clusters are broken at variable lengths thus split clusters may be created. An Empirical Rule was formulated distinguishing development due to a complete Hox cluster from development due to split Hox clusters. BM can ‘explain’ this Empirical Rule. In a spontaneous mutation where the cluster fastening is dismantled, a weak pulling force automatically shifts the cluster inside the Hox activation domain. This cluster translocation can probably explain the absence of Temporal Collinearity in Drosophila.

The inherited ‘EIA’ process at Brexit is based on a ‘Project’ period from Inception tothe start of construction works. The ‘Incompleteness’ of the process covers andidentifies stages that will impact on the environmental cycle: construction period,operational life, de-commissioning and a return to acceptable environmental footprint.A master environment structure-plan framework is required to commence with theupgrading of the complete ‘EIA’ process, embracing separate limbs for the UK’spriority environmental targets for climate change, and other major adverse effectswhich result in serious ‘harm’ to the UK environment. The identification of the processfor ‘incompleteness’ requires effective sustainability, and inclusion of effectivemanagement tools, for the essential ‘monitoring/control/recording’ proceduresthroughout the project life and the natural environmental cycle. This will allow theopportunity for a new approach to a structured ‘Suite of EIAR Directives’, to enable a‘EIAR’ regime that ‘will remain fit and proper for UK purpose’.

This paper presents a parametric study of the multistorey hydro-powered pump, known as "Bunyip," which has demonstrated significant potential in contributing to rural regions. The study aims to understand the underlying physics of the system and enhance its hydraulic performance. A transient three-dimensional model using the commercial Computational Fluid Dynamics (CFD) tool Ansys-Fluent is utilized to gain insights into the fundamental flow mechanics, operational efficiency, standard capacity, and relative delivery. The investigation involves an initial assessment of performance for three Bunyip devices based on manufacturing data. Parametric analysis is conducted, and a parametric dataset is generated through meticulous application and numerical modelling. The CFD results are validated against experimental data. Three design configurations are considered, and 58 sets of varied input parameters are examined. The best design configuration is evaluated against five cases of conventional hydro-power pump systems. The results indicate that a smaller diameter of the pressure chamber and a higher supply head lead to higher pressure, achieving a target head of 3 m with 15% efficiency and a flowrate of 11.82 l/min.

In this paper is discussed sediment transport as a mechanical process that characterises a natural stream or channel flow regime. The objective of experimental work presented in this paper is to recall and to give another prospect of well-known Meyer-Peter and Müller approach for estimation of Shield’s number (θ_c,θ) in laboratory conditions, and calibration of dimensionless MPM number (A). For this purpose two different experiments are conducted, during the first experiment water amount flushed on the flume and bed slope was changed simultaneously until equilibrium state is achieved, meanwhile is estimated the critical Shield’s number (θ_c). While, during the second experiment, water amount was kept constant, only bed slope of flume was continuously tilted, meanwhile sediment, discharge and Shield’s number (θ) was determined for given hydraulic conditions. In addition calibration of dimensionless MPM number (A) was performed, where several iteration were considered until for (A=3.42), sediment discharge measured become almost equal with sediment discharge computed by using MPM formula. After these experiments, is concluded that MPM formula can be used also for other certain initial condition and similar procedure may be adopted to calibrate the dimensionless MPM number (A) .

Pre-existing fracture and secondary cracks in rock mass are formed by natural power, such as magma condensed to igneous rocks and tectonic movement. The orientation and inclination of these fractures obey certain laws relating to the stress, temperature, minerals, water and so on. Therefore, cracks react differently under the same external loading on the condition of various inclination, fissure apertures, stiffness and joint roughness. To simulate the crack propagation, experiments on hollow cylinder cut by one oblique interface mimicking single fracture accumulated numerous data discovering the failure criterion in accordance with the Mohr-Coulomb criterion. And theory on the Terzaghi’s effective principle take an essential role in controlling the behavior of triggering fault. This paper introduced a series of oblique plane cutting the cylinder regarded as fractures at different inclination to concentrate on how the fracture characteristics effect the stress and strain distribution inside the specimen, especially, the relationship between displacement and water head. The key point of this numerical simulation is coupling the solid phase and the fluid phase, specifically, the mechanic and seepage field. According to the statics, curves referring to deformation and water head could be described as increasing lines. Besides, simulation on coupling solid phase and fluid phase can supply crucial evaluation on activating existing fault, and thus predicting induced seismicity in reservoirs or estimating damage in shale gas exploration.

Here we analyze three well-known conjectures: (i) the existence of infinitely-many twin primes, (ii) Goldbach’s strong conjecture, and (iii) Polignac’s conjecture. We show that the three conjectures are related to each other. In particular, we see that in analysing the validity of the Goldbach’s strong conjecture, one must consider also the existence of an infinite number of twin primes. As a consequence of how we approach this analysis, we also observe that if this conjecture is true, then so is Polignac’s conjecture. Our first step is an analysis of the existence of infinitely-many twin primes numbers. For this, using the formula 4((n−1)!+1) ≡ −n (mod n(n + 2)) – satisfied if and only if (n, n + 2) are twin primes –, together with Wilson’s theorem, we obtain conditions that must be met for two numbers to be twin primes. Our results, obtained from an analytic and functional study, lead us to conclude that there may exist infinitely-many twin primes. Next, we consider the validity of the Goldbach’s strong conjecture. After showing that the conjecture is true for the first even numbers, we notice a pattern that we analyze for any even number, reducing it to three cases: (i) when the even number 2n is two times a prime number n; (ii) when the even number 2n is such that n = 2m, with 2m − 1 and 2m + 1 twin primes; (iii) all other cases, i.e., for any 2n even number ∀n ∈ N with n > 1, n prime or not, with independence of n = 2m being 2m−1 and 2m+1 twin primes or not. In this last case we show that one can always find a certain r ∈ N such that 1 < r < n satisfying that n−r and n+r are primes, so that their sum is 2n. In this case we use the reduction to absurd method, and our results lead us to conclude that Goldbach’s strong conjecture is true to the best of our calculations, as well as the Polignac’s conjecture.

We construct a repeated quantum game with public goods by the quantum entanglement and strong reciprocity. By using the paradigm of quantum game analysis, we obtain that both the quantum entanglement and strong reciprocity are helpful to intensify cooperation and achieving Pareto optimality. In addition, under an example which is greenhouse green viable planting industry, we verify that the quantum entanglement and strong reciprocity have a positive role in cooperation.

A physical scrutiny of experimental results published in Physical Review Letters (December 2015, M. Giustina, et al., Phys. Rev. Lett. 115, 250401, and L. K. Shalm et al., Phys. Rev. Lett. 115, 250402) is undertaken. These articles reported that measured outcomes were fitted with quantum states possessing a dominant component of non-entangled photons, thereby contradicting their own claim of quantum nonlocality. With probabilities of photon detections lower than 0.1 %, the alleged quantum nonlocality cannot be classified as a resource for developing quantum computing devices, despite recent publicity. Experimental evidence of a feasible process for quantum-strong correlations has been identified (M. Iannuzzi, et al., Phys. Lett. A, 384 (9), 126200, 2020) in terms of correlations between independent and multi-photon states evaluated as Stokes vectors on the Poincaré sphere. As single-photon sources are not needed, the design and implementation of quantum computing operations will be significantly streamlined.

Physics of high-Tc superconducting cuprates is obscured by the effect of strong electronic correlations. One way to overcome the problem is to seek for an exact solution at least within the small cluster and expand it to the whole crystal. Such an approach is in the heart of the cluster perturbation theory (CPT). Here we develop CPT for the dynamic charge and spin susceptibilities (spin-CPT), within which the correlation effects are explicitly taken into account by the exact diagonalization. We apply spin-CPT to the effective two-band Hubbard model for the cuprates obtained from the three-band Emery model and calculate one- and two-particle correlation functions, namely, spectral function and spin and charge susceptibilities. Doping dependence of the spin susceptibility was studied within spin-CPT and CPT-RPA that is the CPT generalization of the random phase approximation (RPA). Both methods produce the low energy response at four incommensurate wave vectors in qualitative agreement to the results of the inelastic neutron scattering on overdoped cuprates.

New setting is introduced to study the global powerful alliance. Global powerful alliance is about a set of vertices which are applied into the setting of neutrosophic graphs. Neighborhood has the key role to define this notion. Also, neighborhood is defined based on strong edges. Strong edge gets a framework as neighborhood and after that, too close vertices have key role to define global powerful alliance based on strong edges. The structure of set is studied and general results are obtained. Also, some classes of neutrosophic graphs excluding empty, path, star, and wheel and containing complete, cycle and r-regular-strong are investigated in the terms of set, minimal set, number, and neutrosophic number. Neutrosophic number is used in this way. It’s applied to use the type of neutrosophic number in the way that, three values of a vertex are used and they’ve same share to construct this number. It’s called “modified neutrosophic number”. Summation of three values of vertex makes one number and applying it to a set makes neutrosophic number of set. This approach facilitates identifying minimal set and optimal set which forms minimal-global-powerful-alliance number and minimal-global-powerful-alliance-neutrosophic number. Two different types of sets namely global-powerful alliance and minimal-global-powerful alliance are defined. Global-powerful alliance identifies the sets in general vision but minimal-global-powerful alliance takes focus on the sets which deleting a vertex is impossible. Minimal-global-powerful-alliance number is about minimum cardinality amid the cardinalities of all minimal-global-powerful alliances in a given neutrosophic graph. New notions are applied in the settings both individual and family. Family of neutrosophic graphs has an open avenue, in the way that, the family only contains same classes of neutrosophic graphs. The results are about minimal-global-powerful alliance, minimal-global-powerful-alliance number and its corresponded sets, minimal-global-powerful-alliance-neutrosophic number and its corresponded sets, and characterizing all minimal-global-powerful alliances, minimal-t-powerful alliance, minimal-t-powerful-alliance number and its corresponded sets, minimal-t-powerful-alliance-neutrosophic number and its corresponded sets, and characterizing all minimal-t-powerful alliances. The connections amid t-powerful-alliances are obtained. The number of connected components has some relations with this new concept and it gets some results. Some classes of neutrosophic graphs behave differently when the parity of vertices are different and in this case, cycle, and complete illustrate these behaviors. Two applications concerning complete model as individual and family, under the titles of time table and scheduling conclude the results and they give more clarifications and closing remarks. In this study, there’s an open way to extend these results into the family of these classes of neutrosophic graphs. The family of neutrosophic graphs aren’t study deeply and with more results but it seems that analogous results are determined. Slight progress is obtained in the family of these models but there are open avenues to study family of other models as same models and different models. There’s a question. How can be related to each other, two sets partitioning the vertex set of a graph? The ideas of neighborhood and neighbors based on strong edges illustrate open way to get results. A set is global powerful alliance when two sets partitioning vertex set have uniform structure. All members of set have more amount of neighbors in the set than out of set and reversely for non-members of set with less members in the way that the set is simultaneously t-offensive and(t-2)-defensive. A set is global if t=0. It leads us to the notion of global powerful alliance. Different edges make different neighborhoods but it’s used one style edge titled strong edge. These notions are applied into neutrosophic graphs as individuals and family of them. Independent set as an alliance is a special set which has no neighbor inside and it implies some drawbacks for these notions. Finding special sets which are well-known, is an open way to purse this study. Special set which its members have only one neighbor inside, characterize the connected components where the cardinality of its complement is the number of connected components. Some problems are proposed to pursue this study. Basic familiarities with graph theory and neutrosophic graph theory are proposed for this article.

This study aimed to investigates obesity-related glomerulopathy (ORG) at cellular, structural, and transcriptomic levels. Thirty Wistar rats were randomized into two groups: control (n=15) and study groups (n=15) that were fed a standard (SD) and high-fat diet (HFD), respectively. After 10 weeks, the weight, kidney function, histological features, and transcriptomic changes were assessed. HFD group exhibited increased weight gain (55.8% vs 29.2%; P< 0.001) and albuminuria (10384.04 ng/ml vs 5845.45 ng/ml; P

Reducing the carbon footprint of energy production is one of the most pressing challenges facing humanity today. Lignocellulosic biomass residues from fruit production industries show promise as a viable energy source. This paper presents a study of the Italian context concerning the utilization of orchard lignocellulosic residues for energy production as electricity or bioethanol. The potential of various orchard residues was assessed through chemical and physical analysis, and an equivalent electrical energy of about 6441.62 GWh or an amount of 0.48 Mt/y of bioethanol was obtained based on the average annual dry residue mass availability of about 3.04 Mt/y. These data represent the 9.30% of the national electrical energy production from renewable sources, as well as the 6.21% of the Italian demand for gasoline in 2022. Electricity generation from these residues shown its potential as a reliable and sustainable baseload power source, as well as source of renewable transportation fuel. The studied process could be a valuable reference to expand these concepts on global scale to achieve a greener and more sustainable energy future.

It has been empirically observed that the upper tail of the firm size distribution follows either the Pareto distribution or the Zipf distribution, with both patterns being explained by Gibrat’s law (Gabaix, 1999). This article analyzed firm revenue data from China, spanning from 2005 to 2013, to examine the whole range of the firm size distribution. Our empirical analysis revealed that firm revenue data over these years is well fitted by a three-parameter generalized Pareto distribution, with the fitted parameters indicating a dichotomy: The size distribution of large-sized firms, namely the upper tail, is asymptotically characterized by a Pareto distribution or a Zipf distribution, whereas the size distribution of smaller and medium-sized firms is approximated by an exponential distribution. This finding suggests that Gibrat’s law should be extended to account for the emergence of a generalized Pareto distribution.

A hypothesis that the generally accepted value of the LiPON conductivity should be attributed to the absorption and displacement currents is substantiated. The reason is a small contribution of the drift current due to field screening by the electric double layer. The basis for this assumption is the measurement of the LiPON absorption capacitance, according to which its dielectric constant is about 106. An alternative equivalent circuit containing a non-ideal absorption element is proposed and its impedance is calculated. It is shown that the Bode diagrams of the alternative circuit well approximate the experimental curves. Parameters and the magnitude of electric field screening are calculated basing on proposed model of a double electric layer. Considering the screening effect, the drift conductivity of LiPON is obtained, which value is in good agreement with the data on lithium concentration and mobility.

Per- and polyfluoroalkyl substances (PFAS), a large group of developing contaminants, have recently become the subject of increased concern due to their potentially hazardous effects. They are classified as poisonous substances that can be found in a variety of aquatic situations. The widespread usage of PFAS across numerous industries has resulted in a high environmental and biological accumulation of the substance. Identification and elimination of PFAS from the environment is crucial since they are tenacious and have the potential to cause cancer. Traditional methods of PFAS content assessment, while useful in some cases, are often inadequate for continuing environmental control and monitoring. Within academia, there is a noticeable desire for rapid, cost-effective, durable, and readily transportable techniques targeted at detecting PFAS compounds in field settings. As a result, environmental labs and other governmental and non-governmental bodies may start testing more often as mandated by legislation. PFAS-detecting sensors, which offer an innovative solution that can be applied in situ and is affordable and simple to use, have emerged as a promising method for assessment based on the existing research. In addition, it may give administrators and users of water worldwide useful information they can use. This article provides a thorough summary of recent developments, limitations, and performance considerations in PFAS detection sensors. The Surface-enhanced Raman scattering (SERS) method has also been covered because of its excellent sensitivity and specificity for detecting pollutants, making it a potential solution for sensing PFAS. Intelligent sensing systems for PFAS detection should benefit from this research.

Salmonella causes various type of disease worldwide with a remarkable pace. Salmonella enteric serotype typhi (S. typhi), a gram-negative bacterium (only cause disease in man) is the mainly causative agent of Typhoid fever. Typhoid fever is most common in poor and unprivileged developing countries of Asia and Africa. One of the major components of virulence factors produced during salmonella infection is Lipid A, which acts as a potent human immuno-modulator bacterial endotoxin. Regulation of Lipid A biosynthetic pathway occurs at second step, catalyzed by LpxC, a Zn2+ dependent metalloamidase. Systematic Screening of a pool of drug datasets like natural products library from Zinc database, Asinex database, Thiophene analogues fruitfully provided us 3 potent lead molecules s1_dl_mseq2, s1_ll_mseq2, and s2_ll_mseq8 which actively binds with LpxC enzyme and could be developed into sound inhibitors of LpxC enzyme after the application of drug development and processing strategies. Wet lab experimentation is required to validate these results for further use.

Physical properties like shape, volume and size affect the dynamics of biological systems. Along these lines, we focus on the topological properties of biological fluids and their biochemical and physiological outcomes. We take as a paradigmatic example the salivary fluid and describe how its topological features may affect the physiopathology of the oral cavity. Topological approaches assess the general properties of saliva, ignoring small-scale physical details such as density, flow rate, stiffness, viscosity. Specifically, the mucin aggregates scattered in the salivary fluid can be tackled in terms of topological holes, i.e., vortical clusters that modify the direction, flow, impulse, local rate-of-change and velocity of saliva. While the current methodological approaches are inclined to remove the effects of impurities assessing systems as homogeneous structures, we argue that the occurrence of mucins breaks up the salivary fluid’s homogeneity, leading to unexpected biophysical modifications. We suggest that every collected salivary sample is not reliable for accurate clinical and experimental investigation, since it displays highly local as well as variable chemical, physical and biological features, not reflecting the current physiological state of the oral cavity. Therefore, the assessment of a single salivary sample is not fully reproducible and cannot provide information about the biophysical, enzymatic and microbiological content of the whole saliva. In sum, the very topological features of the saliva - such as volume, shape, antipodal cells, vortex area, whirling fluid mass, segmentation, discretization, triangulation, node numbering - produce unnoticed biological consequences and network connectivity features with intriguing operational implications.

Transient receptor potential melastatin-8 (TRPM8) is a cation channel that is activated by cold and “cooling agents” such as menthol and icilin, which induce a cold sensation. Stimulation of TRPM8 activates an intracellular signaling cascade that ultimately leads to a change in the gene expression pattern of the cells. Here, we investigated the TRPM8-induced signaling pathway that links TRPM8 channel activation to gene transcription. Using a pharmacological approach, we show that inhibition of phosphatidylinositol 4-phosphate 5 kinase alpha (PIP5K), an enzyme essential for the biosynthesis of phosphatidylinositol 4,5-bisphosphate, attenuated TRPM8-induced gene transcription. Analyzing the link between TRPM8 and Gq proteins, we show that pharmacological inhibition of the beta gamma subunits impairs TRPM8 signaling. In addition, genetic studies showed that TRPM8 requires an activated Galpha subunit for signaling. In the nucleus, the TRPM8-induced signaling cascade triggers an activation of the transcription factor AP-1, a complex consisting of a dimer of basic region leucine zipper (bZIP) transcription factors. Here, we identified the bZIP protein c-Jun as an essential component of AP-1 within the TRPM8-induced signling cscade. In summary, with PIP5K, Gq subunits and c-Jun we have identified key molecules in the TRPM8-induced signaling from the plasma membrane to the nucleus.

Available options to combat bacterial infections are getting scarce. We require innovative and imaginative approaches to enhance the identification and discovery of effective antimicrobials capable of combating bacteria resistant to multiple or all available drugs. These methods should either directly eliminate the resistant bacteria or influence their viability indirectly by inhibiting their virulence or reducing their resistance to antibacterial agents. One interesting approach is to analyze ancient remedies presumably used to treat bacterial infections, try formulating them, and test them against modern microbes. The field was recently named ancientbiotics. This approach allows us to take advantage of centuries of accumulated empirical knowledge, from several traditional medicines of various ancient cultures across the world. The strategy has already resulted in promising formulations to combat the ESKAPE group of nosocomial pathogens. Moreover, molecular de-extinction consists of genome analysis of extinct species in the search for useful antimicrobials, such as peptides. The de-extinction of simple organisms such as bacteriophages may eventually become a resource for novel tools to combat multidrug-resistant bacteria. In this review, we summarize and discuss the reported antimicrobial effects of ancient remedies and de-extinct molecules known to modern science, and discuss possible new strategies to further harness the potential of past remedies and molecules to help us fight the rise of superbugs.

This study delves into innovative approaches and pragmatic remedies to surmount software access barriers in educational contexts. Financial impediments and limited software installation know-how can impede students from fulfilling course requirements.

We present contrast information, a novel application of some specific cases of relative entropy measures, designed to be useful for cognitive modelling of sequential perception of continuous signals. We explain the relevance of entropy in cognitive modelling of music and language. Then, as a first step to demonstrating the utility of constrast information for that purpose, we show empirically that its discrete case correlates well with existing successful cognitive models in the literature. We explain some interesting properties of constrast information. Finally we propose future work towards a cognitive architecture that uses it.

Immune checkpoint inhibitors (ICI) are a promising form of immunotherapy that has significantly changed the therapeutic landscape for many advanced cancers. They have shown unique clinical benefit against a broad range of tumour types and a strong overall impact on survival in studied patient populations. However, there are still many limitations holding back this immunotherapy from reaching its full potential as a possible curative option for advanced cancer patients. A great deal of research is being undertaken in the hope of driving advancements in this area, building a better understanding of the mechanisms behind immune checkpoint inhibition and ultimately developing more effective, safer, and wider-reaching agents. Taking into account the current literature on this topic, this review aims to explore in depth the basis of the use of ICIs in the treatment of advanced cancers, evaluate its efficacy and safety, consider its current limitations, and finally reflect on what the future holds for this very promising form of cancer immunotherapy.

Some global difficulties in the modern period include energy storage conversion. Researchers have looked to renewable energy resources to discover long-term answers to this dilemma. Fuel cells are one example of prospective energy producing technology. Although these technologies appear to be very enticing, they are known to be expensive due to high expenses. Catalyst costs, as well as concerns concerning energy density. Pt based Electrocatalysts have traditionally been used to drive ORR and offer efficient power outputs. However, cost constraints have limited the use of these electrocatalysts, rendering them inefficient. Apart from the high price, Pt-based Electrodes are prone to time-dependent drift and CO deactivation, both of which occur gradually. Electrocatalysts deteriorate over time, reducing the efficiency of fuel cells. This is why alternative electrocatalysts are in high demand for future energy applications. This review covers the comparative study of Platinium and Non-Platinium based electrocatalyst in fuel cells, their shortcomings and recent advancement for efficient and optimized electrocatalyst.

The Diophantine equation for which p is prime 2^n = p^2 + 7 and n is integers with p > 0, is examined in this work. It is demonstrated by examining the characteristics of the equation that the only solutions meeting these requirements are p = 3 with n = 5 and p = 5 with n = 7. In order to analyze the above equation, it is necessary to look at the properties of primes and how they relate to powers of two. These results advance our knowledge of prime numbers and how they behave in certain mathematical problems.

Many studies have addressed sex differences in patients with psoriatic arthritis, although these are aimed more at describing the phenotype than at investigating the causes underlying the differences. Cross-sectional study of 203 patients. The clinical and demographic variables included age, years of education, time since onset, smoking, type of treatment, clinical presentation, number of entheses affected, dactylitis, fatigue, and cutaneous involvement. Disease activity,functioning and disease was measured. The comorbid conditions evaluated included obesity (and leptin as an associated parameter), anxiety and depression, and sleep quality. Mean age was 54.6, and 46.8% of patients were women. Women less frequently presented axial involvement and more frequently presented enthesitis. They also presented greater disease activity, greater disease impact, and poorer functioning, as well as greater fatigue. As for comorbid conditions, women presented a higher leptin/BMI ratio, higher levels of anxiety and depression, and poorer sleep quality. By sex, pain affecting women was associated with the leptin/BMI ratio and sleep quality. The leptin/BMI ratio was not associated with any component of disease activity in men. Sex was associated with several clinical manifestations, disease activity, functioning, and disease impact. Leptin was associated with intensity of pain in women.

This exploration delves into the intricacies of decision-making in business management. It covers decision-making models, influencing factors, real-world case studies, and strategies for effectiveness. Emphasizing the role of data-driven approaches, the exploration highlights the transformative impact of effective decisions on organizational success. Challenges and pitfalls are addressed, providing insights for overcoming obstacles. The importance of mastering decision-making is underlined as a strategic advantage in the competitive landscape of business management. In summary, this exploration offers a nuanced understanding, empowering leaders to make informed choices that shape organizational destinies.

Previous studies have revealed the microbial metabolism of dietary choline in the gut, leading to its conversion into trimethylamine (TMA), a precursor of the cardiovascular inflammatory marker trimethylamine N-oxide (TMAO). Polymethoxyflavones (PMFs), exemplified by tangeretin, demonstrate efficacy in mitigating TMAO-induced cardiovascular inflammation. However, the specific mechanism by which these compounds exert their effects, particularly in modulating the gut microbiota, remains uncertain. This investigation focused on tangeretin, a representative PMFs, exploring its influence on the gut microbiota and the choline-TMA conversion process. Experimental results showed that tangeretin treatment attenuated the population of CutC-active bacteria, specifically Clostridiaceae and Lactobacillus, induced by choline chloride in rat models. This inhibition resulted in reduced efficiency in choline conversion to TMA, thereby ameliorating cardiovascular inflammation resulting from prolonged choline consumption. In conclusion, tangeretin's preventive action against cardiovascular inflammation is intricately linked to its targeted modulation of TMA-producing bacterial activity.

Abstract: this study aimed to evaluate the benefits of applying 5 cmH2O of CPAP using a pediatric helmet during the recovery phase from general anesthesia in brachycephalic dogs. Brachycephalic dogs undergoing various surgical procedures were included in the study, and a total of 64 subjects were randomly assigned to receive either standard oxygen supplementation (NO-CPAP group) or oxygen supplementation combined with CPAP (CPAP group). The study evaluated arterial blood pH, blood gas partial pressures of O2 and CO2, arterial blood O2 saturation, and related parameters during recovery. The dogs were monitored, and helmet tolerance was assessed using predefined criteria. Of the initially assessed 69 dogs, 64 were enrolled, 32 in the CPAP group and 32 in the NO-CPAP group. Fifteen dogs in the NO-CPAP group were excluded based on predetermined criteria. The CPAP group showed significant improvements in PaO2, PaO2/FiO2, P(A-a)O2, F-Shunt, and respiratory rate compared to the NO-CPAP group (p < 0.001). The incidence of reintubation and helmet intolerance was higher in the NO-CPAP group (18% and 15.6%, respectively) than in the CPAP group (0%). This study highlights the potential benefits of incorporating CPAP, delivered through a pediatric helmet, in the perioperative management of brachycephalic dogs. Keywords: Brachycephalic; dog; CPAP; oxygenation; anesthesia

Traditional aquaculture systems appear to be confronted with the high total ammonia nitrogen (TAN) produced during production, which can be harmful to aquatic life. As the demand for global fish production continues to increase, farmers should adopt Recirculating Aquaculture Systems (RAS) to improve production. The biofilter plays a vital role in ammonia removal. However, the drawback of the biofilter operation is needed an automatic and controlled system with a water quality monitoring system to guarantee optimal performance. RAS utilize a monitoring and control system to maintain the water quality and control the biofilm growth in the biofilter to reduce the ammonia. Therefore, this study focuses on developing a water quality monitoring and control system to achieve optimum biofilm performance. From 35 days of the experiment, the water quality was controlled at a level save for the aquatic environment, such as dissolved oxygen, pH, temperature, and TDS. Thus, the highest TAN removal efficiency is 50% when biofilm thickness reaches 119.88 µm.

Accurate estimation of chlorophyll content in wheat leaves can not only reflect its growth and nutritional status, but also provide a scientific basis for field management. In order to evaluate the potential of hyperspectral data to estimate the chlorophyll content of wheat leaves, this study focused on the leaves of wheat at the flag-picking stage, flowering stage, grain filling stage and maturity stage. Based on the framework of five vegetation indexes, the spectral index was con-structed by using the combination of 400-1000nm bands, and the correlation between the con-structed spectral index and the measured chlorophyll value was analyzed, and the optimal spectral index was screened by the correlation coefficient. Based on the optimal spectral index, polynomial regression, random forest, decision tree and artificial neural network were used to establish the estimation model of chlorophyll value, and the optimal model for estimating the chlorophyll value of wheat leaves was selected through model evaluation. The results showed that the five optimal spectral indices at the four growth stages were mainly composed of red band, red edge band and near-infrared band, and the five optimal spectral indices at the grain filling stage had the highest correlation with the chlorophyll value, and the absolute value of the cor-relation coefficient was greater than 0.73, the accuracy of the estimation model established in the four growth stages was different, and the estimation accuracy of the flag stage was the best, with R² and RMSE of 0.79 and 2.63, respectively. The above results show that hyperspectral data is suitable for estimating the chlorophyll value of wheat leaves, and the PR model of flag picking period can be used as the optimal model for estimating the chlorophyll value of wheat leaves.

Over the past decade, the volume and quality of data in the oil and gas industry have exploded, breeding exciting opportunities to implement machine learning for better data- driven decisions. One critical example is hydraulic fracturing (HF), given our ever-growing reliance on HF to meet global hydrocarbon demand. This paper systematically explores the work of several researchers to apply ML techniques (including linear regression, neural networks, support vector machine, decision trees, and more) to HF-related operations, from production forecast to HF design. Furthermore, this study examines how optimization algorithms (including gradient-free, differential evolution, and surrogate-based optimizations) are incorporated with different ML techniques for selecting optimal HF parameters (like fracture number, proppant concentration, and more) during the planning process. The paper aims to provide a comprehensive overview without delving too deeply into technical intricacies to ensure accessibility for a broader audience. Additionally, it introduces innovative techniques currently being integrated into the industry and offers a clear understanding of the processes involved. Ultimately, the analysis concludes that machine learning is an accurate and cost-effective alternative for hydraulic fracturing optimization.

Treatment wetlands (TWs) are Nature-Based Solutions increasingly used worldwide for wastewater (WW) treatment able to remove mineral and organic pollutants through both physical and biochemical process. Besides the reusable effluent, the TWs produce as main output plant biomass that need to be harvested and disposed at least once a year with significant management costs and TW temporary out of service. This study aims (i) to evaluate the potential of TWs biomass for local energy production and (ii) to understand TW hydraulic conductivity (Ks) effects on the biomass biomethane yield. Specifically, it was addressed by determining the Biochemical Methane Potential of common reed (CR) (Phragmites australis) samples collected at three harvest times from the 10-years-old horizontal subsurface treatment wetland (HSTW) used as a secondary WW treatment system for the IKEA® store located in Catania (Eastern Sicily, Italy). Furthermore, the falling head test was conducted to assess the hydraulic conductivity (Ks) variation in the HSTW, in order to understand the influence on the CR biomethane production. Average methane content values were 130.57 Nm3CH4/tVS (±24.29), 212.70 Nm3CH4/tVS (±50.62) and 72.83 Nm3CH4/tVS (±23.19) in August, September, October 2022, respectively. Ks was correlated with both dry matter (R2 = 0.58) and fiber content (R2 = 0.74) and, consequently, affected the biomethane yield that increased at the Ks increases (R2 = 0.30 in August, R2 = 0.57 in September). In the framework of a circular economy, results showed the successfully possibility of integrating the bioenergy production into TWs. The research could contribute (i) to encourage plant operators to reuse biomass from TWs for local energy production and (ii) to help plant operators to understand Ks effects on the biomass biomethane yield, in order to increase the sustainability of the system and to reduce the maintenance costs.

Spray technology is widely used in various industries, including medicine, food production, mechanical engineering, and nanopowder manufacturing. Achieving high dispersion and a narrow particle size distribution is crucial for many applications. Ultrasonic spraying is commonly used to achieve this. On other hand, hydraulic nozzles provide high atomization performance. Combining these two technologies promises to offer significant benefits, but the complex processes that occur simultaneously in such a device require careful study. This work proposes a fundamental design for an acoustic-hydraulic nozzle and investigates the physical processes when a liquid is sprayed using this nozzle, both theoretically and experimentally. The study identifies the critical modes of spraying and confirms that the simultaneous use of ultrasound and hydraulic pressure can produce a fine spray (droplet size less than 50 μm) with high productivity (5-10 ml/s). This approach has significant potential for modern industries and technologies.

Knowledge of water availability in terms of spatial (i.e., depth) and temporal variability of soil water is essential to describe soil water infiltration and storage processes accurately. Therefore, performing simulations of soil water dynamics can be a valuable tool to evaluate different land uses and their impact on water availability. Consequently, this study aimed to model the volumetric soil water content (θ, cm3 cm-3) under agroforestry systems (AFS) with cocoa. For this purpose, the θ was monitored at different depths (0-20, 20-40, 40-60, 60-80, 80-100 cm) in the soil profile of four plots (20 × 50 m) of cocoa under agroforestry systems. Environmental conditions significantly influenced the water balance of the cocoa crop. There were seven moments when evapotranspiration (ET0) was higher than 5 mm d-1. During those moments, the environment exhibited higher PAR values of 1041 µmol m-2 s-1, very low atmospheric relative humidity (RHa) levels (around 45%), higher ambient temperatures of 32.2 ºC and a vapor pressure deficit of 1.6 kPa whose θ levels reached 0.32 cm3 cm-3 and a water balance of -5.7 mm, which presented negative values during most of the study period. The θ obtained from the HYDRUS-1D model presented a slight bias as a high level of coherence between the observed values, based on the model's goodness-of-fit estimators. The above provides accurate simulations of soil water content at various depths, much-needed information for management schemes for cocoa cultivation under agroforestry systems.

Recent scholarship highlights the significant environmental impact of the expanding hydraulic fracturing industry, necessitating up-to-date, comprehensive, national-scale assessments. Addressing this gap, this literature review provides a thorough analysis of the contamination and induced seismicity associated with shale-gas hydraulic fracturing in the United States. Employing systematic reviews of literature and federal reports up until July 2023, this study reveals multiple areas of concern. Notably, water and soil contamination, seismic activity, and air pollution are identified as significant challenges linked to shale gas extraction. However, ongoing studies are actively exploring remediation strategies, including advancements in monitoring and treatment technologies, aimed at mitigating the impact of contamination. These findings underscore the need for stringent regulations, continuous research, and effective management practices. This work emphasizes the importance of a collaborative approach that leverages field studies, experimental investigations, and computational advancements to ensure the responsible development of shale gas resources.

During shearer operation, piston rod is susceptible to wear from invasion of pollutants, and then ruins sealing ring in hydraulic cylinder. This work attempts to conduct a systematical investigation of Cu-DLC (Cu-doped Diamond-like Carbon) film to improve the seal performance. Failure process of hydraulic cylinder was analyzed, and relevant parameters were determined. Several Cu-DLC films were deposited on the substrate of piston rod in a multi-ion beam assisted system, and their structures and combined tribological performances were investigated. As a result, dust particles attached to the piston rod may enter the cylinder, and damage the sealing ring under the radial force. Cu grains prefer to orientate (111) crystal plane with increase of Cu content, and may induce drop of hardness and internal stress for the film. Friction coefficient of the film ranges from 0.04 to 0.15, and rise of IG/ID ratio from 1.4 to 2.3 in Raman data indicates that bond transition from sp3-C to sp2-C may lower the friction coefficient. Modification mechanism of Cu-DLC film for the seal performance may come from synergistic effects of (i) contact force and friction heat induce the film graphitization, (ii) Cu doping improves toughness of the film and acts as a solid lubricant, and (iii) transfer layer plays a role of self-lubrication.

Insoluble contaminant or a varnish is a result of oil degradation by products and sometimes depleted additive molecules. This process is in most cases initiated by thermal stress placed on the oil. In tribology varnish becomes a significant problem for modern complex machinery lubrication systems as it has severe debilitating effects such as loss of operating clearances and heat transfer. Problems arising from varnish build-up in lubricants can be inhibited by timely oil analysis which gives us important information about oil-degradation level and current insoluble contaminants potential of oil. There are several laboratory testing methods to describe varnish potential. The most applied one is a colorimetric analysis, also known as MPC (Membrane Patch Colorimetry) as it tends to be reasonably quick and cost-effective. This study applies principles generally used for MPC test of turbine oils to measure lubricant generated insoluble contaminants of hydraulic fluids. For this purpose, in-service oil samples were taken from hydraulic circuits of rubber vulcanizing presses and analyzed using testing method based on method defined by standard ASTM D7843 – 21. Accuracy of this testing method is dependent on development time of tested sample. Therefore, we not only try to proof applicability of this method for hydraulic oils but also want to determine incubation time needed for efficient and accurate determination of concentration of insoluble contaminants in the sample.

Hydraulic relationships are important for water resource management, hazard prediction, and modelling. Since Leopold first identified power law expressions that could relate streamflow to top-width, depth, and velocity, hydrologists have been estimating ‘At-a-station Hydraulic Geometries’ (AHG) to describe average flow hydraulics. As the amount of data, data sources, and application needs increase, the ability to apply, integrate and compare disparate and often noisy data is critical for applications ranging from reach to continental scales. However, even with quality data, the standard practice of solving each AHG relationship independently can lead to solutions that fail to conserve mass. The challenge addressed here is how to extend the physical properties of the AHG relations, while improving the way they are hydrologically addressed and fit. We present a framework for minimizing error while ensuring mass conservation at reach - or hydrologic Feature - scale geometries’(FHG) that complies with current state-of-the-practice conceptual and logical models. Through this framework, FHG relations are fit for the United States Geological Survey’s (USGS) Rating Curve database, the USGS HYDRoacoustic dataset in support of the Surface Water Oceanographic Topography satellite mission (HYDRoSWOT), and the hydraulic property tables produced as part of the NOAA/Oakridge Continental Flood Inundation Mapping framework. The paper describes and demonstrates the accuracy, interoperability, and application of these relationships to flood modelling and presents this framework in an R package.

At present, the drilling rig for deep seabed shallow strata is widely used in the exploration of ocean cobalt-rich crust resources and other fields, which not only can obtain solid core samples at a specific station, but the operation process is relatively safe. This paper mainly presents the structure and mechanism of mobile drilling rig in acquiring the seafloor cores (up to 1.5 m long). Based on the function of the AMESim software, the hydraulic propulsion system model of mobile drilling rig is established, which is the basis and core part of the mobile drilling rig. Moreover, the control methods of closed-loop and PID are respectively used to control the hydraulic propulsion system for simulation analysis. Through the comparison of simulation results, it is found that the PID control method is more convincing in verifying the design rationality of hydraulic propulsion system. In the simulation of the PID-controlled hydraulic propulsion system, the co-simulation technology of AMESim and Matlab/Simulink not only establishes the hydraulic model and control model, but also determines the relevant simulation parameters, which is helpful to improve the system simulation efficiency. In its verification deployment in the South China Sea, the mobile drilling rig has been operated for many times at different depths, and some cores have been successfully obtained. Furthermore, the mobile drilling rig has been used during the 55th Voyage of China Oceanic Scientific Expedition supported by China Ocean Mineral Resources R&D Association. Several sites were explored and a large number of cobalt-rich crust cores were obtained. The powerful theory and sea trails are provided to support for the further research on survey of the abyssal resource.

Soil hydraulic properties are often derived indirectly, i.e. computed from easily available soil properties with pedotransfer functions (PTFs), when those are needed for catchment, regional or continental scale applications. When predicted soil hydraulic parameters are used for the modelling of the state and flux of water in soils, uncertainty of the computed values can provide more detailed information when drawing conclusions. The aim of this study was to update the previously published European PTFs (Tóth et al., 2015, euptf v1.4.0) by providing prediction uncertainty calculation built into the transfer functions. The new set of algorithms was derived for point predictions of soil water content at saturation (0 cm matric potential head), field capacity (both -100 and -330 cm matric potential head), wilting point (-15.000 cm matric potential head), plant available water, and saturated hydraulic conductivity, as well as the Mualem-van Genuchten model parameters of the moisture retention and hydraulic conductivity curve. The minimum set of input properties for the prediction is soil depth and sand, silt and clay content. The effect of including additional information like soil organic carbon content, bulk density, calcium carbonate content, pH and cation exchange capacity were extensively analysed. The PTFs were derived adopting the random forest method. The advantage of the new PTFs is that they i) provide information about prediction uncertainty, ii) are significantly more accurate than the euptfv1, iii) can be applied for more predictor variable combinations than the euptfv1, 32 instead of 5, and iv) are now also derived for the prediction of water content at -100 cm matric potential head and plant available water content.

Hardy Cross originally proposed a method for analysis of flow in networks of conduits or conductors in 1936. His method was the first really useful engineering method in the field of pipe network calculation. Only electrical analogs of hydraulic networks were used before the Hardy Cross method. A problem with the flow resistance versus the electrical resistance makes these electrical analog methods obsolete. The method by Hardy Cross is taught extensively at faculties and it still remains an important tool for analysis of looped pipe systems. Engineers today mostly use a modified Hardy Cross method which threats the whole looped network of pipes simultaneously (use of these methods without computers is practically impossible). A method from the Russian practice published during 1930s, which is similar to the Hardy Cross method, is described, too. Some notes from the life of Hardy Cross are also shown. Finally, an improved version of the Hardy Cross method, which significantly reduces number of iterations, is presented and discussed. Also we tested multi-point iterative methods which can be used as substitution for the Newton-Raphson approach used by Hardy Cross, but this approach didn’t reduce number of required iterations to reach the final balanced solution. Although, many new models have been developed since the time of Hardy Cross, main purpose of this paper is to illustrate the very beginning of modeling of gas and water pipe networks or ventilation systems.

This paper studies the optimization method of pump hydraulic performance based on the response surface method. A parametric model of impeller and diffuser is established. Three-dimensional optimization is carried out on the basis of the initial model obtained by one-dimensional design method. We select the pump hydraulic efficiency and the head as objective function and constraint function. Response surface models are constructed to analyze the relationship between the objectives and the design variables, and the global optimization of hydraulic performance is realized. According to the internal flow characteristics of pump, this paper proposes the strategy of two steps optimization, which aims at meridional plane and blade shape, respectively, to solve the problem of large numbers of design parameters and computational cost. The optimization results show that the hydraulic efficiency of pump increased by 3.7%, and the head is nearly the same.

As a new kind of highly compact and efficient micro-channel heat exchanger, printed circuit heat exchanger (PCHE) is a promising candidate satisfying the heat exchange requirements of liquefied natural gas (LNG) vaporization at low and high pressure. The effects of airfoil fin arrangement on heat transfer an flow resistance were numerically investigated using supercritical liquefied natural gas (LNG) as a working fluid. The thermal properties of supercritical LNG were tested by utilizing a REFPROF software database. Numerical simulation was performed using FLUENT. The inlet temperature of supercritical LNG was 121 K,and its pressure was 10.5MPa. The reference mass flow rate of LNG was set 1.22 g/s for the vertical pitch L_v = 1.67 mm and the staggered pitch L_s = 0 mm, with the Reynolds number of about 3750. The SST k-ω model with enhanced wall treatment was selected by comparing with the experimental data. The airfoil fin PCHE had better thermal-hydraulic performance than that of the straight channel PCHE. Moreover, the airfoil fins with staggered arrangement displayed better thermal performance than that of the fins with parallel arrangement. The thermal-hydraulic performance of airfoil fin PCHE was improved with increasing L_s and L_v. Moreover, L_v affected on the Nusselt number and pressure drop of airfoil fin PCHE more obviously. In conclusion, a sparser staggered arrangement of fins showed a better thermal-hydraulic performance in airfoil fin PCHE.

Efficient resource allocation is crucial in clusters with frugal Single-Board Computers (SBCs) possessing limited computational resources. These clusters are increasingly being deployed in edge computing environments in resource-constrained settings where energy efficiency and cost-effectiveness are paramount. A major challenge in Hadoop YARN scheduling is load-balancing, as frugal nodes within the cluster can become overwhelmed, resulting in degraded performance and frequent occurrences of out-of-memory errors, ultimately leading to job failures. In this study, we introduce an Adaptive Multi-criteria Selection for Efficient Resource Allocation (AMS-ERA) in Frugal Heterogeneous Hadoop Clusters. Our criterion considers CPU, memory and disk requirements for jobs and aligns the requirements with available resources in the cluster for optimal resource allocation. To validate our approach, we deploy a heterogeneous SBC-based cluster consisting of 11 SBC nodes and conduct several experiments to evaluate the performance using Hadoop wordcount and terasort benchmark for various workload settings. The results are compared to the Hadoop-Fair, FOG and IDaPS scheduling strategies. Our results demonstrate a significant improvement in performance with the proposed AMS-ERA, reducing execution time by 27.2%, 17.4% and 7.6% respectively using terasort and wordcount benchmarks.

Dengue, a perilous fever-type illness transmitted by mosquitoes, remains a significant global health concern. The incidence of dengue outbreaks is primarily influenced by climate factors, contributing to fluctuating dengue cases. Therefore, this study aims to develop predictive models for dengue outbreaks employing Machine Learning (ML) techniques. Four distinct ML models, namely K-Nearest Neighbor (KNN), Random Forest (RF), Gradient Boosting Regressor (GBR), and Support Vector Regressor (SVR), were employed in this study. Prior to model analysis, thorough data preprocessing was conducted. In some instances, certain attributes exhibiting sparse correlations with dengue occurrence were eliminated based on correlation analysis. Upon finalizing the models, performance evaluation was executed through comparison based on Mean Absolute Error (MAE) metrics. The findings of this comparative analysis revealed that the KNN model exhibited significantly superior performance compared to the other three models. This outcome underscores the potential of KNN in enhancing the accuracy of dengue outbreak predictions.

Contrary to previous belief, mutation frequency also depends on how essential a gene is. Mutation frequency is substantially lower in the coding regions of essential genes and higher in less essential genes. Even though the mutation bias based on gene essentiality is incapable of invalidating Darwinism, this bias certainly added a rather unsubtle obstacle to it by contradicting a paradigm that was widely held: that mutations are random in the sense of being independent of their function for the organism. The reason this bias occurs is currently unknown. Here, I present the theoretical solution of why genetic mutations also depend on whether the gene is more or less essential. My theory is that each gene or epigene has its own level of resistance to entropic elevation, something directly proportional to the frequency of its expression. The more a gene is expressed, the higher is its resistance to entropic elevation and vice versa. For genetic information to be conserved instead of suffering mutation, a relevant factor is also the frequency of its expression. The energy expenditure directed to a gene of current utility engenders resistance to entropic elevation of the information encoded in that gene, as energy enables not only the existence of information but also its conservation. My theory—which is based on fundamental physics and contains predictions that can be empirically tested—solves a crucial problem in evolutionary biology and genetics; if I am right, I will have established a biological law. Finally, my aim here is also to provide a substantial advance in knowledge about the relationship between information, genetics, and thermodynamics.

Transition to renewable energy has been recognized as a crucial step to addressing climate change and achieving greenhouse gas reduction targets, but it can also cause energy sprawl if not planned properly. Clean renewable energy communities (CREC) are emerging globally as an approach for decentralized energy systems and an alternative to traditional centralized energy systems. CREC aims to lower the energy carbon footprint, enhance local energy resilience, and improve the quality of life of residents. Through a comprehensive literature review, this study reviews metrics that can assess the impact of energy transition plans and support decision-making to select technologies that create efficient, reliable, and accessible energy systems. It classifies these metrics into a five-dimensional sustainability approach: environmental, technical, social, economic, political and institutional. The paper proposes a conceptual framework to guide decision-makers in recognizing the role of sustainable land development, sustainable energy planning, and resiliency as an integrated approach to energy transition planning. This framework stresses mapping the place-based potential for clean renewable energy at various scales, highlights the importance of resilience in energy planning, and addresses challenges associated with energy source selection, built environment efficiency, and energy trade. While the framework can serve as a starting point for evaluating energy transition plans, further work is needed to address the limitations of existing metrics and identify additional evaluations for energy mixed land use that are critical to managing energy sprawl on ecosystem services and other land uses.