In the past decades, regenerative medicine applied on skin lesions has been a field of constant improvement for both human and veterinary medicine. The process of healing cutaneous wound injuries implicates a well-organized cascade of molecular and biological processes. However, sometimes the normal process fails and can result in a chronic lesion. In addition, wounds are considered an increasing clinical impairment, due to the progressive ageing of the population, as well as the prevalence of concomitant diseases, such as diabetes and obesity, that represent risk aggravating factors for the development of chronic skin lesions. Stem cells regenerative potential has been recognized worldwide, including towards skin lesion repair, Tissue engineering techniques have long been successfully associated with stem cell therapies, namely the application of 3D bioprinted scaffolds. With this review we intend to explore several stem cell sources with promising aptitude towards skin regeneration, as well as different techniques used to deliver those cells and provide a supporting extracellular matrix environment, with effective outcomes. Furthermore, different studies are discussed, both in vitro and in vivo, towards their relevance in the skin regeneration field.

Background: Melatonin is a potent mitochondrial, cytoprotective and antioxidant molecule with potentially strong anti-aging properties. Topical melatonin has shown to improve the clinical signs of skin aging. Melatosphere™ is a new lipid-based delivery system able to improve stability and skin penetration of melatonin when used in topical formulations. No clinical studies, using objective instrumental data, are available so far regarding the positive effect of Melatosphere™ in improving wrinkles in women with mild-to-moderate skin aging. Study Aim: We evaluate, in an open prospective, evaluator-blinded trial, the effects on skin texture of 2 months treatment with a Melatosphere™ based cream. Subjects and Methods: 15 women aged >45 years with mild to moderate facial skin aging (Glogau score ≥2) participated in the trial, after their informed consent. An ANTERA 3D computer-assisted skin analysis evaluation for the assessment of coarse and fine wrinkles of the periorbital area and melanin content was performed at baseline and after two months of treatment. An evaluator-blinded Investigator Global assessment of skin elastosis, roughness, level of dyscromia, skin dryness and presence of actinic damage was also performed at the same time points using a 4-grade score from 0 (no sign) to 3 (severe sign). Results: At baseline the mean (SD) IGA score was 8.2(1.0). After 2 months the IGA score significantly decrease to 4.2(1.4) (49% reduction) (P=0.0007). ANTERA 3D evaluations showed a significant reduction in skin coarse and fine wrinkles volume in the target area of -31% and -18%, respectively. Melanin content was reduced significantly by -17%. Conclusion: Topical melatonin carried in Melatosphere improves in the short-term signs of skin aging evaluated clinically and by ANTERA 3D device in women with mild to moderate skin aging.

Atopic dermatitis (AD) is a chronic inflammatory disorder presenting a dysregulated immune response and derangement of the epidermal barrier lipids. The Th2-type cytokines interleukin IL-4 and IL-13 play a prominent role in AD by activating the Janus Kinase/Signal Transduction and Activator of Transcription (JAK/STAT) intracellular signal axis. This study aimed to investigate the role of JAK/STAT in the lipid perturbations induced by Th2 signaling in 3D-epidermal equivalents. We used tofacitinib, a low-molecular-mass JAK inhibitor, to screen for the JAK/STAT-mediated deregulation of lipid metabolism. Th2 cytokines decreased the expression of elongases 1, 3, and 4, and serine-palmitoyl-transferase and increased that of sphingolipid delta(4)-desaturase, and carbonic anhydrase 2. Th2 cytokines inhibited the synthesis of palmitate and caused a depletion of triglycerides. This depletion was associated with altered PC profiles and fatty acid (FA) metabolism. Overall, the ceramide profiles were minimally affected. Except for most sphingolipids and very long chain FAs, the effects of Th2 on lipid pathways were reversed by co-treatment with tofacitinib. An increase in the mRNA levels of CPT1A and ACAT1, reduced by tofacitinib, suggests that Th2 cytokines promote FA beta-oxidation. In conclusion, pharmacological inhibition of JAK/STAT activation prevents the lipid disruption caused by halted homeostasis of FA metabolism.

With the development of organizational biology and forced from the EU Cosmetic Regulation (EU/1223/2009) with the complete ban of animal testing for cosmetic purposes, 3D skin models have been widely developed due to their similar physiological structure and metabolic function to native human tissue. 3D skin models for in vitro cosmetic evaluation are still promising alternative methods for evaluating phototoxicity, corrosivity and irritation. These models have been used for early screening and later validation of toxicity and efficacy evaluation by many well-known cosmetic companies. 3D skin models have become an important tool in cosmetic evaluation research. This article reviews the development of 3D skin models and their application in cosmetic evaluation. An outlook on the current application and future technological development directions in the cosmetic field is also presented.

This study introduces SkinLiTE, a lightweight supervised contrastive learning model, tailored to enhance the detection and typification of skin lesions in dermoscopic images. The core of SkinLiTE lies in its unique integration of supervised and contrastive learning approaches, which leverages labeled data to learn generalizable representations. This approach is particularly adept at handling the complexities and imbalances inherent in skin lesions datasets. The methodology encompasses a two-phase learning process. In the first phase, SkinLiTE utilizes an encoder network and a projection head to transform and project dermoscopic images into a feature space where contrastive loss is applied, focusing on minimizing intra-class variations while maximizing inter-class differences. The second phase freezes the encoder's weights, leveraging the learned representations for classification through a series of dense and dropout layers. The model was evaluated using three datasets from Skin Cancer ISIC 2019-2020, covering a wide range of skin conditions. SkinLiTE demonstrated superior performance across various metrics—accuracy, AUC , and F1 score—particularly when compared with traditional supervised learning models. Notably, SkinLiTE achieved an accuracy of 0.9087 using AugMix augmentation for binary classification of skin lesions. It also showed comparable results with the state-of-the-art approaches of ISIC challenge without relying on external data, underscoring its efficacy and efficiency. The results highlight the potential of SkinLiTE as a significant step forward in the field of dermatological AI, offering a robust, efficient, and accurate tool for skin lesion detection and classification. Its lightweight architecture and ability to handle imbalanced datasets make it particularly suited for integration into Internet of Medical Things environments, paving the way for enhanced remote patient monitoring and diagnostic capabilities. This research contributes to the evolving landscape of AI in healthcare, demonstrating the impact of innovative learning methodologies in medical image analysis.

Medical management of chronic canine pruritic dermatologic conditions is challenging and often frustrating. This is a report that shows one way of aiding the management of pruritic dogs using a remote monitoring device. It is often difficult for veterinarians to get dog owners to return to the clinic once a dog is treated. It is possible that a 3-D accelerometer device could provide information to the clinic staff on the success or failure of a pruritus treatment plan while the dog was cared for at home. Eighty-seven dogs and their owners came to a Florida dermatology specialty clinic or its general practice hospital to be evaluated and treated for pruritus. An ANIMO® 3-D accelerometer was placed on the collar of dogs diagnosed and treated for pruritus. Dogs that completed the study were monitored for 120 days (4 months). The ANIMO app monitored a dog’s daily scratching, shaking, sleeping, activity, resting, barking and calories consumed and summarized this information in a daily report visible on the pet owner’s smart phone. An additional variable (grooming minutes per day) could be seen by the Sure Petcare R&D Team that was not yet available in the app. The use of a 3-D accelerometer enabled veterinarians to continuously monitor dogs at home when they were being treated for itching. Clinic staff kept in touch with the owners by phone and could change therapy or bring the dog back for a recheck if problems were seen. Daily reports were combined into line charts that showed plots of scratching, shaking, grooming and sleeping over four months. Veterinarians were able to remotely monitor dogs that had been treated for pruritus for up to four months through the use of a collar-borne monitoring device. Dog owners and clinic staff used the daily summaries which were accessible through a smart phone app. Dogs seemed to tolerate the device well because of its small size and unobtrusive nature.

The process of full-thickness skin regeneration is complex and has many parameters involved, which makes it difficult to use a single dressing to meet the various requirements of the complete regeneration at the same time. Therefore, developing hydrogel dressings with multifunction, including tunable rheological properties and aperture, hemostatic, antibacterial and super cytocompatibility, is a desirable candidate in wound healing. In this study, a series of complex hydrogels were developed via the hydrogen bond and covalent bond between chitosan (CS) and alginate (SA). These hydrogels exhibited suitable pore size and tunable rheological properties for cell adhesion. Chitosan endowed hemostatic, antibacterial properties and great cytocompatibility and thus solved two primary problems in the early stage of the wound healing process. Moreover, the sustained cytocompatibility of the hydrogels was further investigated after adding FGF and VE-cadherin via the co-culture of L929 and EC for 12 days. The confocal 3D fluorescent images showed that the cells were spherical and tended to form multicellular spheroids, which distributed in about 40-60μm thick hydrogels. Furthermore, the hydrogel dressings significantly accelerate defected skin turn to normal skin with proper epithelial thickness and new blood vessels and hair follicles through the histological analysis of in vivo wound healing. The findings mentioned above demonstrated that the CS/SA hydrogels with growth factors have tremendous potential as multifunctional hydrogel dressings for full-thickness skin regeneration incorporated with hemostatic, antibacterial, sustained cytocompatibility for 3D cell culture and normal skin repairing.

In recent years, with the development of social media, people are more and more inclined to upload text, pictures and videos on the platform to express their personal emotions, thus the number of short videos is increasing and becoming the first choice for people to socialize. Unlike the traditional way, people can convey their personal emotions and opinions through media other than words, such as video images, etc. for external information. Therefore, the expression and analysis of emotions is not only through text, but also through the analysis of emotional needs in images and videos, and the research scholars have customized products for individual users. Compared with pure text content, video information can more intuitively express users' happiness, anger and sorrow, thus short video-related applications have gained more and more popularity among Internet users in recent years. However, not all short videos on social networking sites can accurately express users' emotions, and related text information can more accurately assist sentiment analysis and thus improve accuracy. However, short video sentiment analysis based on video frame images is inaccurate in some scenarios, such as when expressing tears of joy, the sentiment expressed by the user's facial expression and voice are different, which will cause errors in the analysis of sentiment. As a result, researchers began to consider multimodal sentiment analysis to reduce the impact of the above scenarios on short video sentiment analysis. This paper focuses on proposing a sentiment analysis method for short videos. We first propose a residual attention model to make full use of the information in audio to classify the emotions contained in them. Then the text information in the dataset is classified by feature extraction. The key to extract features from text information is not only to retain the semantic information of the text, but also to explore the potential emotional information in the text, so as to ensure the integrity of the text information features. The experiments show that the sentiment analysis model proposed in this paper is more superior than the baselines.

Fatigue remains a challenge especially for high end metal AM parts and materials. From a design perspective, the fatigue limit of an AM solution can be improved upon by optimizing the manufacturing process for a certain material and part. In addition, improved accuracy of design methodologies aids in capturing the features critical for fatigue and quantifies their significance to desired part lifetime as well as providing a basis for their avoidance. In current work we present an overall concept merging thermomechanical process and powder bed solidification modeling to micromechanical analysis of fatigue of the resulting material microstructure. Material features critical to fatigue, particularly surface roughness, internal defects such as porosity and cracks and on the other hand inclusions, can be assessed directly on the basis of AM part microstructure with respect to the resulting fatigue limit. Case analyses consist of maraging steel and nickel alloys. The overall scheme provides a basis for optimization of metal AM solutions against fatigue and multiscale modeling founded basis for fatigue design.

The three-dimensional Ising model on the m$\times$n$\times$l cubic lattice with the screw boundary condition along the ${\bf X}$ direction and the periodic boundary conditions along both ${\bf Y}$ and ${\bf Z}$ directions is exactly solved by using the $2^{mn}$-dimensional representation of the rotation group in $2mn$-dimensions, similar to the Kaufman's spinor approach in two dimensions. The exact partition function is obtained from two sets of $2^{mn-1}$ eigenvalues of the $2^{mn}$-dimensional transfer matrix {\bf V} corresponding to the even and odd eigenvectors, respectively. Such the eigenvalues are determined by the angles of the 2mn-dimensional rotation associated with {\bf V}.

This study addresses the challenge of treating skin cancer effectively, especially in visible areas like the face, where traditional methods may be undesirable. Current options, including surgery and radiation therapy, have limitations such as complexity, expense, and imprecise dose delivery. The proposed solution involves additively manufacturing personalized patches using diagnostic imaging data, offering a targeted and controlled dose of beta-emitting isotopes like Y-90. The patches, tailored to the tumor's shape and depth, aim to minimize damage to healthy tissues and structures. Through 3D printing technology we demonstrated the feasibility of creating individualized applicators filled with radioisotopes, that have the potential to deliver therapeutic doses while ensuring patient comfort and affordability. This innovative approach, based on radiation delivery simulations, offers a promising future alternative to conventional radiation therapy methods. Clinical trials are required to validate its efficacy and safety, but the potential for reduced radiation exposure and enhanced treatment precision positions this personalized and targeted therapy as a valuable advancement in skin cancer treatment.

A catastrophic loss of microbial biodiversity on the skin has led to alarming increase in the prevalence of allergies and long-term damage to the skin, which could also have damaging knock on effects to overall health. This study uses 50 human participants, to obtain an average (benchmark) value for the biodiversity of ‘healthy’ western skin, which is crucial in updating our 2017 skin health measuring mechanism to use standardised methodology. Previous work with a larger sample size was unsatisfactory for use as a benchmark due to its use of different and outdated diversity indices. We also investigated the effect of age and sex, two known skin microbiome affecting factors. Although no statistical significance is seen for age- and sex- related changes in diversity, there appear to be changes related to age which elaborates on previous work which used larger, more general age ranges. Our study indicates adults age 28-37 have highest diversity, and age 48-57 the lowest. Crucially, because of this study we are now able to update the skin health measuring mechanism from our 2017 work. This will aid diagnostic assessment of susceptibility to cutaneous conditions or diseases, and treatment. Testing any human subject will be rapidly improved by obtaining future benchmark diversity values for any age, sex, body site and area of residence, to which they can be compared. This improvement means we can also more accurately investigate the ultimate question: What factors in the western world are a main cause of the skin allergy epidemic? This could lead to future restriction of certain synthetic chemicals or products found to be particularly harmful to the skin.

Skin detection, the process of distinguishing between skin and non-skin regions in a digital image, is widely used in a variety of applications ranging from hand gesture analysis to body part tracking to facial recognition. Skin detection is a challenging problem that has received a lot of attention from experts and proposals from the research community in the context of intelligent systems, but the lack of common benchmarks and unified testing protocols has hampered fairness among approaches. Comparisons are very difficult. Recently, the success of deep neural networks has had a major impact on the field of image segmentation detection, resulting in various successful models to date. In this work, we survey the most recent research in this field and propose fair comparisons between approaches using several different datasets. The main contributions of this work are: (i) a comprehensive literature review of approaches to skin color detection and a comparison of approaches that may help researchers and practitioners choose the best method for their application; (ii) a comprehensive list of datasets that report ground truth for skin detection; (iii) a framework for evaluating and combining different skin detection approaches. Moreover, we proposed an ensemble of convolutional neural networks and transformers that obtains state of the art performance. All the code is made publicly available at https://github.com/LorisNanni

This research discusses the development of a software-centered EdTech (Education Technology) class model through the implementation of a course titled "3D Time Machine" at a 4-year university in Republic of Korea over two semesters. The course focused on teaching 3D modeling software, Blender, within the history department. The primary objective of offering this course was to equip students from the digital generation with the capability to manipulate digital technology effectively. Through studying historical materials and accumulating domain knowledge, students could construct their narratives from their unique perspectives. This aimed to foster their proficiency in digital technology operation, preparing them for an education environment increasingly centered around virtual worlds. As the use of virtual worlds gains prominence in educational settings, there is a growing need to incorporate curricula that prepare students to thrive as well-prepared citizens in future societies. Assessing the digital competencies of contemporary university students and designing instructional models with particular attention to their needs is becoming increasingly important. This research draws insights from interviews, conducted in both face-to-face and written formats, with students who participated in the "3D Time Machine" course. The interviews revealed valuable insights that can be actively incorporated into the development of software-centered EdTech instructional models. They reported that they expanded their perceptions as they learned how to make their ideas tangible. The course helped students overcome their fear of digital technology. In conclusion, the course effectively employs 3D modeling technology, a software-centered EdTech, as a core element in helping students develop their narratives rapidly and diversely, thereby playing a crucial role in their ability to articulate their unique perspectives.

In this study, we designed a functional neuro-cardiac model to help us examine the role of neuronal regulation and confirm the importance of neural innervation techniques for cardiac tissue regeneration. A three-dimensional (3D) bioprinted neuro-cardiac scaffold composed of a mixture of gelatin-alginate and alginate-genipin-fibrin hydrogels was developed with a 2:1 ratio of AC16 cardiomyocytes (CMs) and retinoic acid differentiated SH-SY5Y neuronal cells (NCs) respectively. A unique semi-3D bioprinting approach was adopted where the CMs were mixed in the cardiac bioink and printed using an anisotropic accordion design to mimic the physiological tissue architecture in vivo. The voids in this 3D structure were methodically filled in using a NCs-gel mixture and cross-linked. Confocal fluorescent imaging using Microtubule-associated protein 2 (MAP-2) antibodies for labeling NCs, and the MyoD1 antibody for CMs revealed functional coupling between the two cell types in the final cross-linked structure. This data confirmed the development of a physiologically functional neuro-cardiac model that can be used to study neuro-cardiac modulation under physiological and pathological conditions.

Blood-derived products (BP) like citrate-platelet-rich plasma (CPRP) or hyperacute serum (HAS) are known to contain many growth factors. Combined mitogenic and DNA damaging stimuli might lead to increased senescent cell burden and altered senescence-associated secretory pheno-type (SASP). Therefore, the senescent state was extensively tested by γH2AX staining, p21 Q-PCR and western blot, growth curves and senescence associated ß-galactosidase staining. Two main treatments with BP were performed early (immediately after etoposide) and late (after addition-al 11days). Effects of the BP treatment was evaluated by IL-6 and IL-8 measurement as well as collagen (COL1) and p21 mRNA expression. Additionally, XTT assays, cell size measurements, viability assays, and cell number calculations were performed. HAS treated cells in early treat-ment had the lowest observed IL-6 and IL-8. In contrast, there was a clear inflammatory response for IL-8 on HAS and CPRP treated cells in late treatment. For COL1 expression an upregulation in early treatment could be shown, meanwhile cells in the late treatment group remained unaf-fected. In CPRP treated cells, the COL1 expression decreased. All in all, BP treatment seems to have slightly positive effects regarding skin rejuvenation.

There is a skin allergy epidemic in the western world, and the rate of deterioration has increased significantly in the past 5-10 years. It is probable that there are many environmental contributing factors, yet some studies have linked it primarily to the rise in the use of synthetic chemical ingredients in modern cosmetics. Our challenge, therefore, was to find a mechanism to determine the effect these substances have on skin health, and whether they really are a primary cause of long term damage to the skin. The first problem is the lack of any definitive way to measure skin health. Motivated by the overwhelming evidence for a link between deficient gut flora and ill health, we decided to look at whether our skin microbiota could similarly be used as an indicator of skin health. Our research illustrates how it is microbiota diversity alone that can predict whether skin is healthy or not, after we revealed a complete lack of conclusive findings linking the presence or abundance of particular species of microbe to skin problems. This phenomenon is replicated throughout nature, where high biodiversity always leads to healthy ecosystems. ‘Caveman’ skin, untouched by modern civilisation, was far different to ‘western’ skin and displayed unprecedented levels of bacterial diversity. The less exposed communities were to western practices, the higher the skin diversity, which is clear evidence of an environmental factor in the developed world damaging skin. For the first time we propose benchmark values of diversity against which we can measure skin to determine how healthy it is. This gives us the ability to be able to predict which people are more likely to be prone to skin ailments, and start to test whether cosmetic ingredients and products are a main cause of the skin allergy epidemic.

As described in previous work, the use of synthetic chemical ingredients in modern cosmetics is postulated to be a cause of damage to the skin microbiome. The discovery that biodiversity on the human skin is currently the only reliable indicator of skin health, meant that for the first time, a mechanism to test for healthy skin was possible. Using this mechanism and in collaboration with The Medical University of Graz, who carried out the independent study, this work aimed to help answer whether modern day synthetic cosmetics are a main cause of long term damage to the skin microbiome. Thirty-two human participants tested three different face washes for their effect on the skin’s microbial diversity, along with skin pH, moisture and TEWL (trans-epidermal water loss), washing twice a day for four weeks. The upper volar forearm of the volunteers was swabbed at the beginning, two weeks in and end (four weeks). 16S rRNA sequencing was used. One leading ‘natural’ brand full of synthetic ingredients, a leading synthetic brand and a 100% natural face wash were used. Results give the first indications of a link between synthetic ingredients in a cosmetics product, and its effect on skin microbiome biodiversity. It paves the way for future studies on the topic with a larger sample group, longer test period and standardised methodology to create a universal standard for testing the health of skin using benchmark diversity values. This can be used in the future to test the effectiveness of cosmetics or ingredients on skin health, leading to the banning of products proven to harm the skin’s natural environment.

This article couples human metabolic factors and heating environmental factors, and uses a 57 node human thermal physiological model to study the heating effect of radiators. It provides a way to objectively calculate and directly quantify the effect of heating equipment on human thermal physiological parameters. As the inlet speed increases, the surface temperature of the human body first increases and then decreases. At a speed of 3m/s, it basically reaches a high value. Continuing to increase the wind speed, as the indoor convection intensity further increases, the surface temperature of the human body will decrease, leading to a decrease in thermal comfort. Compared with floor radiation heating under similar indoor temperature conditions, forced convection radiator heating has similar skin temperatures in various parts of the human body after the indoor design temperature exceeds 20 ℃, and the overall thermal comfort of the two technical solutions is equivalent. Research has shown that the turbulence wind speed of convective radiators should not be too small, with a wind speed range of 2.5m/s to 3m/s. The heating effect of using horizontal air outlet from the lower part of the radiator is better than that of vertical air outlet from the upper part. Convection type radiator heating is more suitable for buildings with rooms that are not too high due to the large indoor temperature gradient.

Atopic dermatitis (AD) is a chronic and allergic skin disease, however, there is no cure for the disease. Many studies have shown anti-AD potentials of red ginseng, while red ginseng marc (RGM) remained after the ginseng extraction is discarded as industrial waste. However, it is recently reported that RGM, particularly fermented RGM (fRGM), still contains the bioactive properties. Thus, anti-allergic effects of fRGM were examined in 2,4-dinitrochlorobenzene-induced AD-like mice model. The model was topically treated with distilled water (control), dexamethasone, or fRGM for six weeks. The treatments of fRGM alleviated the skin lesions and reduced serum IgE levels, compared with the control. The fRGM also reduced skin levels of lipid peroxidation and superoxide anion, however, increased glutathione contents, with down-regulated gene expressions for inflammatory mediators. The histopathological analyses demonstrated that fRGM suppressed the epidermal thickening, collagen deposition, and inflammatory cell and mast cell infiltration, which involved the anti-inflammatory, anti-oxidant, and anti-apoptotic effects. Further, fRGM suppressed hypertrophic changes and inflammatory responses in the spleen and lymph node. The beneficial effects were observed in the dexamethasone and fRGM groups, however, the antioxidant effects were evident only in the fRGM treatments. These provide useful information for developing fRGM as therapeutic sources for AD.

Corneal opacity is a leading cause of vision impairment and suffering worldwide. Transplantation can effectively restore vision and reduce chronic discomfort. However, there is a considerable shortage of viable corneal graft tissues. Tissue engineering may address this issue by advancing xeno- keratoplasty as a viable alternative to conventional keratoplasty. In particular, livestock decellularization strategies offer the potential to generate bioartificial ocular prosthetics in sufficient supply to match existing and projected needs. To this end, we have examined the best practices and characterizations that have supported the current state-of-the-art driving preclinical and clinical applications. Identifying the challenges that delimit activities to supplement the donor corneal pool derived from acellular scaffolds allowed us to hypothesize a model for keratoprosthesis applications derived from livestock combining 3D printing and decellularization.

Innovations in engineering education are undergoing a noticeable transformation. Higher education institutions are practicing distance education, remote laboratories, studio pedagogies and several other approaches in order to increase their students’ retention, success, and preparedness for the job market. In engineering education, maker spaces have become popular in the last ten years in universities as well as community colleges, high-schools and community innovation hubs. A large number of engineering colleges have allocated significant spaces, and at some universities entire buildings as maker spaces to be used for curricular and extracurricular activities. Success stories of these types of spaces are well documented. This paper describes the activities and programs held at Tennessee Tech University’s maker space called ‘iMakerSpace.’ These accomplishments include several workforce development activities. The impact and effectiveness of the iMakerSpace is evaluated through analysis of survey data.

When the skin is afflicted by disease such as cancer, these essential functions are disrupted, putting the entire person at risk. While the American Cancer Society lists 6 major cancer types, the National Institute of Arthritis and Musculoskeletal and Skin Diseases identifies 13 significant benign skin disorders, reflecting the diversity of skin conditions in dermatology. This topical review aims to provide an overview of the pathophysiology of these major skin cancers and disorders and summarize conventional diagnostic methods and current treatment approaches.

We are witnessing the revival of the CAM model, which was already used in the past by some authors studying angiogenesis and anti-cancer drugs, that now offers a refined model to fill, in the translational meaning, the gap between in vitro-in vivo studies. It can be used for a wide range of purposes, from testing cytotoxicity, pharmacokinetics, tumorigenesis, invasion, to action mechanisms of molecules, and validation of new materials from tissue engineering research. CAM model is easy to use with a fast outcome and makes experimental research more sustainable since allowing to replace, reduce and refine pre-clinical experimentation ("3Rs" rules [1]). This re-view aims to highlight some unique potentials that CAM-assay presents; in particular, the authors intend to use in the next future the CAM model to verify, in a microenvironment comparable to in vivo conditions, albeit simplified, the angiogenic ability of functionalized 3D constructs to be used in regenerative medicine strategies in the recovery of skeletal injuries of critical size (CSD) that do not repair spontaneously. For this purpose, organotypic cultures will be planned on sever-al CAMs set up in temporal sequence: a sort of organ model for assessing CSD conducted in the CAM bioreactor, rather than in vivo.

Skin cancer is a prevalent type of malignancy on a global scale, and the early and accurate diag-nosis of this condition is of utmost importance for the survival of patients. The clinical assessment of cutaneous lesions is a crucial aspect of medical practice, although it encounters several obsta-cles, such as prolonged waiting time and misinterpretation. The intricate nature of skin lesions, coupled with variations in appearance and texture, presents substantial barriers to accurate clas-sification. As such, skilled clinicians often struggle to differentiate benign moles from early ma-lignant tumors in skin images. Although deep learning-based approaches such as convolution neural networks have made significant improvements, their stability and generalization continue to confront difficulties, and their performance in accurately delineating lesion borders, capturing refined spatial connections among features, and using contextual information for classification is suboptimal. To address these limitations, we propose a novel approach for skin lesion classification which combines snake models of Active Contour (AC) Segmentation, ResNet50 for feature ex-traction and a Capsule Network with a fusion of lightweight attention mechanisms, to attain the different feature channels and spatial regions within feature maps, enhance the feature discrimi-nation, and improve accuracy. We employed the Stochastic Gradient Descent (SGD) optimization algorithm to optimize the model's parameters. The proposed model is implemented on publicly available datasets, namely HAM10000 and ISIC 2020. The experimental results showed that the proposed model achieved an accuracy of 98% and AUC-ROC of 97.3%, showcasing substantial potential in terms of effective model generalization compared to existing state-of-the-art (SOTA) approaches. These results highlight the potential for our approach to reshape automated derma-tological diagnosis and provide a helpful tool for medical practitioners.

A key component of efforts to identify the biological and drug-specific aspects that contribute to therapeutic failure or unexpected exposure-associated toxicity is the study of drug-intestinal barrier interactions. While methods supporting such assessments are widely described for human therapeutics, there is relatively little information available for similar evaluation in support of veterinary pharmaceuticals. There is, therefore, a critical need to develop novel approaches for evaluating drug-gut interactions in veterinary medicine. Three-dimensional (3D) organoids can address these difficulties in a reasonably affordable system that circumvents the need for more invasive in vivo assays in live animals. However, a first step in the development of such systems is understanding organoid interactions in a 2D monolayer. Given the importance of orally administered medications for meeting the therapeutic need of companion animals, we demonstrate growth conditions under which canine colonoid-derived intestinal epithelial cells survive, mature, and differentiate into confluent cell systems with high monolayer integrity. We further examine the applicability of this canine colonoid-derived 2D model to assess the permeability of three structurally diverse, passively absorbed β-blockers (e.g., propranolol, metoprolol, and atenolol). Both absorptive and secretive apparent permeability (Papp) of these drugs at two different pH conditions were evaluated in canine colonoid-derived monolayers and were compared with that of Caco-2 cells. This proof-of-concept study provides promising preliminary results with regard to the utility of canine-derived organoid monolayers for species-specific assessments of therapeutic drug passive permeability.

Development of novel anti-cancer peptides requires a rapid screening process which can be accelerated by using appropriate in vitro tumor models. Breast carcinoma tissue is a three dimensional (3D) microenvironment, which contains a hypoxic center surrounded by dense proliferative tissue. Biochemical clues provided by such 3D cell mass cannot be recapitulated in conventional 2D culture systems. In this experiment, we evaluate the efficacy of the sandalwood peptide, cyclosaplin on established in vitro 3D silk breast cancer model using invasive MDA-MB-231 cell line. The anti-proliferative effect of the peptide on 3D silk tumor model is monitored by alamar blue assay, with conventional 2D culture as control. The proliferation rate, glucose consumed, LDH, and MMP-9 activity of Human breast cancer cells are higher in 3D constructs compared to 2D. A higher concentration of drug is required to achieve 50% cell death in 3D culture than 2D cultures. The cyclosaplin treated MDA-MB-231 cells showed significant decrease in MMP-9 activity in 3D constructs. Microscopic analysis revealed the formation of cell clusters evenly distributed in the scaffolds. The drug treated cells were less in number, smaller and showed unusual morphology. Overall, these findings indicate the role of cyclosaplin as a promising anti-cancer therapeutics.

Malignant cells cultured in three-dimensional (3D) models have been found to be phenotypically and biochemically different from their counterparts cultured conventionally. Since most of these studies employed solid tumor types, how 3D culture affects multiple myeloma (MM) cells is not well understood. Here, we compared MM cells (U266 and RPMI8226) in a 3D culture model with those in conventional culture. While the conventionally cultured cells were present in single cells or small clusters, MM-3D cells grew in large spheroids. We discovered that STAT3 was the pathway that was more activated in 3D in both cell lines. The active form of STAT3 (phospho-STAT3 or pSTAT3), which was absent in MM cells cultured conventionally, became detectable after 1-2 days in 3D culture. This elevated pSTAT3 level was dependent on the 3D environment, since it disappeared after transferring to conventional culture. STAT3 inhibition using a pharmacological agent, Stattic, significantly decreased the cell viability of MM cells and sensitized them to bortezomib in 3D culture. Using an oligonucleotide array, we found that 3D culture significantly increased the expression of several known STAT3 downstream genes implicated in oncogenesis. Since most primary MM tumors are naturally STAT3-active, studies of MM in 3D culture can generate results that are more representative of the disease.

Glioblastoma (GBM), the most common and aggressive primary brain tumor in adults, remains one of the least treatable cancers. Current standard of care—combining surgical resection, radiation, and alkylating chemotherapy—results in a median survival of only 15 months. Despite decades of investment and research into the development of new therapies, most candidate anti-glioma compounds fail to translate into effective treatments in clinical trials. One key issue underlying this failure of therapies that work in pre-clinical models to generate meaningful improvement in human patients is the profound mismatch between drug discovery systems—cell cultures and mouse models—and the actual tumors they are supposed to imitate. Indeed, current strategies that evaluate the effects of novel treatments on GBM cells in vitro fail to account for a wide range of factors known to influence tumor growth. These include secreted factors, the brain’s unique extracellular matrix, circulatory structures, the presence of non-tumor brain cells, and nutrient sources available for tumor metabolism. While mouse models provide a more realistic testing ground for potential therapies, they still fail to account for the full complexity of tumor-microenvironment interactions, as well as the role of the immune system. Based on the limitations of current models, researchers have begun to develop and implement novel culture systems that better recapitulate the complex reality of brain tumors growing in situ. A rise in the use of patient derived cells, creative combinations of added growth factors and supplements, may provide a more effective proving ground for the development of novel therapies. This review will summarize and analyze these exciting developments in 3D culturing systems. Special attention will be paid to how they enhance the design and identification of compounds that increase the efficacy of radiotherapy, a bedrock of GBM treatment.

Current instrumental technology in evaluating performance of skin care creams is still rather limited and there are no industrial standard testing equipment, method and performance specifications for it. In this paper, we report our attempt in using an instrument called PhabrOmeter for this purpose. PhabrOmeter is a commercialized instrument for sensory performance evaluation of textiles, leather, paper and nonwoven and has been designated by American Association of Textile Chemists and Colorists (AATCC) as a standard test method for textiles, AATCC TM 202 in 2013. By adopting artificial skin samples treated with skin care creams, we have developed a procedure to apply this instrument for evaluation of skin care creams from sample preparation, measurement to data analysis and interpretation. The results using commercial skin care creams to demonstrate the feasibility and advantages of this instrument are provided.

The assortment of low-cost 3D printers for “in-practice” use, e.g., for clear aligner therapies, is ever increasing. To address concerns about the accuracy of orthodontic models produced on such printers when cost efficient modes of 3D printing are employed, this study examined the effect of print model body type and print angulation on accuracy. Six printing-configuration groups were included: 2 model types (solid or hollow shell) combined with 3 print angles (0°, 70°, or 90°) with 10 models/group; all models were printed with 100-µm layer thickness using a digital light processing-based 3-dimensional printer. Eleven selected structures and distances were measured on the printed models with a digital microscope and compared to the same measures on a digitized master model. The clinically-acceptability range was set at ±0.25 mm difference from the master model for single tooth measurements (intra-tooth) and ±0.5 mm for cross-arch measurements (inter-tooth). For individual measurements across all models, 98% fell within clinical acceptability. For mean measurements within each model group, only canine height for the shell-0° model had a mean difference (0.26 mm ± 0.03) outside the clinically acceptable range for intra-tooth measurements. Standard deviations for all intra-tooth measurements were within 0.07 mm. While none of the mean inter-tooth measurements exceeded the acceptability range, the standard deviations were larger (0.04 to 0.30 mm). Accuracy of orthodontic models for clear aligner therapies was not impacted beyond the clinically acceptable range when altering model body type and print angulation to improve efficiency of 3D printing. These findings suggest greater flexibility of the practitioner to alter print settings to address time and cost efficiency in various clinical scenarios and still maintain clinically acceptable model accuracy.

Thermal infrared imagery provides temperature information on target objects, and has been widely applied in non-destructive testing. However, thermal infrared imagery is not always able to display detailed textures of inspected objects, which hampers the understanding of geometric entities consisting of temperature information. Although some commercial software has been developed for 3D thermal model displays, the software requires the use of expensive specific thermal infrared sensors. This study proposes a cost-effective method for 3D thermal model reconstruction based on image-based modeling. Two smart phones and a low-cost thermal infrared camera are employed to acquire visible images and thermal images, respectively, that are fused for 3D thermal model reconstruction. The experiment results demonstrate that the proposed method is able to effectively reconstruct a 3D thermal model which extremely approximates its corresponding entity. The total computation time for the 3D thermal model reconstruction is intensive while generating dense points required for the creation of a geometric entity. Future work will improve the efficiency of the proposed method in order to expand its potential applications to in-time monitoring.

Antibiotic-free approaches are more important than ever to deal with the rapidly growing problem of antibiotic resistance. The blue light 460nm (BL460nm) has been shown to effectively attenuate Staphylococcus aureus to chemical and physical agents through photolysis of the bacterial virulence factor Staphyloxanthin. However, the phototherapy using BL640nm has yet to be investigated in detail for its safety in eradicating Staphylococcus aureus in vitro and in vivo. In this study, we used a LED source producing a continuous wavelength of 460 nm along with hydrogen peroxide to treat S. aureus in culturing conditions and a wound abrasion mouse model. The results proved the safety of the combined therapy when it did not modify the bacterial virulence factors or the susceptibility to the widely used antibiotics. In addition, the experimental results on the mouse skin infection model also showed that the combined therapy is safe to apply to mouse skin and that it did not cause adverse skin irritation. Furthermore, the therapy can help Staphylococcus aureus-infected wounds heal with efficacy comparable to the topical antibiotic Fucidin. The above results suggest that the combination therapy of 460nm blue light and hydrogen peroxide can be safely used as an alternative to or adjunct to antibiotics in treating S. aureus-infected wounds.

The study of the human microbiome has been a hot topic during the last decades and more recently the skin microbiome has aroused great interest as well. So that, scientists have turned their attention to the role of the skin microbiome in skin health, and its relationship with different disorders as atopic dermatitis, psoriasis, acne, and rosacea, among others. Numerous studies and investigations have been performed to study the role of pre and probiotics as nutraceuticals in the treatment of skin diseases, with growing evidence along the last ten years. This review gathers information on the use of “nutribiotics” in skin care health, focus on the main dermatological diseases and other skin conditions. Clinical studies show that nutribiotics could be a new tool to improve skin health and pre, pro, syn, post and para-probiotics seem to be beneficial on several skin disorders, as well as repairing the skin barrier, or promoting wound healing. In conclusion, skin microbiome has emerged as a new field with high potential to develop disruptive solutions to manage skin health and disease. Future advances in this field may facilitate the treatment of skin dysbiosis being nutribiotics a suitable method for skin care.

The future of intelligent manufacturing machines involves autonomous selection of process parameters to maximize productivity while maintaining quality within specified constraints. To effectively optimize process parameters, these machines need to adapt to existing uncertainties in the physical system. This paper proposes a novel framework and methodology for feedrate optimization that is based on a physics-informed data-driven digital twin with quantified uncertainty. The servo dynamics are modeled using a digital twin, which incorporates the known uncertainty in the physics-based models and predicts the distribution of contour error using a data-driven model that learns the unknown uncertainty on-the-fly by sensor measurements. Using the quantified uncertainty, the proposed feedrate optimization maximizes productivity while maintaining quality under desired servo error constraints and stringency (i.e., the tolerance for constraint violation under uncertainty) using a model predictive control framework. Experimental results obtained using a 3-axis desktop CNC machine tool and a desktop 3D printer demonstrate significant cycle time reductions of up to 38% and 17% respectively, while staying close to the error tolerances compared to the existing methods.

The issue of equipment layout in multi-floor satellites consists of two primary parts: allocating the equipment to the satellite's layers and placing the equipment in each layer individually. In reviewing the past literature in this field, firstly, the issue of assigning equipment to layers is observed in a few articles and next in the layout part, the non-overlapping constraint has always been a challenge, particularly for components that do not have a circular cross-section. In addition to presenting a heuristic method for allocating equipment to different layers of the satellite, this article presents a robust flexible programming model (RFPM) for the placement of equipment at different layers, taking into account the inherent flexibility of the equipment in placement and the subject of uncertainty. This model is based on the existing uncertainty between the distances of cuboid equipment which has not been addressed in any of the previous research, and by comparing its outputs with cases from past studies, it demonstrates a significantly higher efficiency in placing the equipment and meeting the limit of non-overlapping constraints between the equipment. Finally, it would be possible to reduce the design time in the conceptual and preparatory stages, as well as the satellite's overall size, while still satisfying other constraints like stability and thermal limitations, moments of inertia and centre of gravity.

The aim of this study was to clarify degradation characteristics in each tissue of the knee complex of a medial meniscectomy (MMx)-induced knee osteoarthritis (KOA) animal model using classical methods and a new comprehensive evaluation method called contrast-enhanced X-ray micro-computed tomography (CEX-μCT), which was developed in the study. Surgical MMx was performed in the right knee joints of five male Wistar rats to induce KOA. At 4 wk post-surgery, the synovitis was evaluated using qPCR. Degradations of the articular cartilage of the tibial plateau were evaluated using classical methods and CEX-μCT. Evaluation of the synovitis demonstrated significantly increased expression levels of inflammation-associated marker genes in MMx-treated knees compared to that in sham-treated knees. Evaluation of the articular cartilage using classical methods showed that MMx fully induced degradation of the cartilage. Evaluation using CEX-μCT showed that local areas of the medial cartilage of the tibial plateau were significantly reduced in MMx-treated knees compared to that in sham-treated knees. On the other hand, total cartilage volumes were significantly increased in MMx-treated knees. Based on the findings of this study, the researchers in KOA research could be helped to select an optimal KOA model to discover new drugs.

Introduction: Skin cancer is the 5th most common cancers in western countries with surge in the cases of occurrence with the passing time making it a global burden on health care system. In this present study, the cancer preventive activities of Argemone mexicana Linn (AM), which has been widely used by folklores to treat different ailments. Aim: The experiment advocates the cancer preventive activity of ethanolic extract of AM and to against DMBA/TPA induced skin cancer in mice model. Materials and Methods: Experimental animals were divided into doses group,100mg/kg B.W, 250mg/kg B.W, 500mg/kg B.W and 1000mg/kg B.W and subjected to toxic dose determination. The DMBA/TPA method was followed to induce the skin cancer in mice along with the feeding of non-toxic doses of 100mg/ kg, 250mg/kg, 500mg/kg mice were given as a pretreatment and 500mg/kg as a separate post treatment group as per body weight. The anti-cancerous activity was determined by different parameters on 0day, 30th day and 60th day including change in incidence of tumour induction, haematological parameters, histopathology and changes in pattern of TNF-α secretion and NF-kB (p65 subunit) signaling pathway in the blood serum. Results: The 1000 mg/kg BW was found to exhibit sub-acute toxicity. It was observed that the 500mg/kg BW pretreated group resisted and delayed the tumour formation for up to 8 weeks as compared to the Negative Control group where growth was seen in 4 weeks. The tumour burden was also found to be varying in a dose-dependent where on 60th day, Negative Control group and 100mg/kg BW was found to possess significantly high (p<0.001) tumour burden in comparison to the 500mg/kg BW group where tumour burden was not found till 60th day. The study was validated by body weight, blood parameters, histopathology and altered pattern in regulation of TNF-α and NF-kB signaling pathway which play an important role in cancer progression. The expression of TNF-α and p65 subunit of NF-kB signaling pathway was found to be reduced significantly in a dose dependent manner and found to be highly reduced in 500mg/kg BW group (p<0.001) as compared to Negative control. Conclusion: The 500mg/kg BW pretreated group was found to have significant results in comparison to 500mg/kg BW post treatment group. The study revealed effective cancer preventive activity of Argemone mexicana Linn leaves (AML) in the mice model and paved a pathway for molecular approaches which could be explored more in future studies.

A single paragraph of about 200 words maximum. For research articles, abstracts should give a pertinent overview of the work. We strongly encourage authors to use the following style of structured abstracts, but without headings: (1) Background: place the question addressed in a broad context and highlight the purpose of the study; (2) Methods: describe briefly the main methods or treatments applied; (3) Results: summarize the article’s main findings; (4) Conclusions: indicate the main conclusions or interpretations. The abstract should be an objective representation of the article, it must not contain results which are not presented and substantiated in the main text and should not exaggerate the main conclusions.

Optical tissue imaging has several advantages over the routine clinical imaging methods, including non-invasiveness (does not change the structure of tissues), remote operation (avoids infection) and ability to quantify the tissue condition by means of specific image parameters. Dermatologists and other skin experts need compact (preferably pocket-size), self-sustained and easy-to-use imaging devices. The operational principles and designs of ten portable in-vivo skin imaging prototypes developed at the Biophotonics Laboratory of Institute of Atomic Physics and Spectroscopy, University of Latvia during the recent five years are presented in this paper. Four groups of imaging devices are considered. Multi-spectral imagers offer possibilities for distant mapping of specific skin parameters, so facilitating better diagnostics of skin malformations. Autofluorescence intensity and photobleaching rate imagers show a promising potential for skin tumor identification and margin delineation. Photoplethysmography video-imagers ensure remote detection of cutaneous blood pulsations and can provide real-time information on cardiovascular parameters and anesthesia efficiency. Multimodal skin imagers perform several of the above-mentioned functions by taking a number of spectral and video images with the same image sensor. Design details of the developed prototypes and results of clinical tests illustrating their functionality are presented and discussed.

With the pressure of the increasing density of urban areas, some public infrastructures are moving to the underground to free up space above, such as utility lines, rail lines and roads. In the big data era, the three dimensional (3D) data can be beneficial to understand the complex urban area. Comparing to spatial data and information of the above ground, we lack of the precise and detailed information about underground infrastructures, such as the spatial information of underground infrastructure, the ownership of underground objects and the interdependence of infrastructures in the above and below ground. How to map reliable 3D underground utility networks and use it in the land administration? First, to explain the importance of this work and find a possible solution, this paper observes the current issues of the existing underground utility database in Singapore. A framework for utility data governance is proposed to manage the work process from the underground utility data capture to data usage. This is the backbone to support the coordination of different roles in the utility data governance and usage. Then, an initial design of the 3D underground utility data model is introduced to describe the 3D geometric and spatial information about underground utility data and connect it to the cadastral parcel for land administration. In the case study, the newly collected data from mobile Ground Penetrating Radar is integrated with the existing utility data for 3D modelling. It is expected to explore the integration of new collected 3D data, the existing 2D data and cadastral information for land administration of underground utilities.

In this paper we aim to help topical probiotics research and development achieve its potential as an incredible future solution for skin problems by investigating whether the current products on the market satisfy criteria for safe and effective use on the skin microbiome. As previously defined, this includes whether they use microbes known to be part of a healthy skin microbiome and in healthy amounts. In addition, we evaluate whether they contain live microbes, and therefore can be classified as probiotics according to the WHO’s definition. Using recent market analysis at least 84% of products do not contain live microbes. Of the products that appeared to use live microbes, they contained those used in research and development of probiotics for the gut. Due to the varying composition of each person’s microbiome, there is not a one size fits all probiotic solution. Personalisation of probiotics products is essential to satisfy the criteria for safe and effective use, but none of the products on the market, understandably, offer this. Upsetting the delicate ecosystem balance of the skin microbiome could have damaging effects and regulation could help to stop a loss of trust between consumers and cosmetics industry. Future work will perform an in-depth evaluation of the topical probiotics on the market in the EU, USA, and Canada. We will also investigate how to move the topic closer to achieving its potential by updating the criteria, including by discussing how to measure the success of a probiotic solution.

Skin ageing is a progressive but modifiable, multi-factorial disorder that involves all skin tissues. Pertaining to its wide range of physiological and psychosocial complications, skin ageing requires rigorous clinical attention. Topical retinoids and per-oral proteoglycans are promising, non-invasive, therapeutic modalities. To overcome the low bioavailability of conventional free retinoids, Nourella® cream with Retilex-A® (Pharma Medico, Aarhus, Denmark) was developed using a proprietary nano-encapsulation technology. The nano-encapsulation is a sophisticated ‘permeation/penetration enhancer’ that optimises topical drug delivery by increasing surface availability and net absorption ratio. Treatment adherence is also improved by minimising skin irritation. Interventional evidence supports the higher efficacy of Retilex-A® in improving skin thickness and elasticity compared with conventional free forms. It is also reported that the rejuvenating efficacy of Retilex-A® and tretinoin are comparable. Another skin anti-ageing approach is proteoglycan replacement therapy (PRT) with Vercilex®. Vercilex® in Nourella® tablet has the potential to ameliorate proteoglycan dysmetabolism in the aged skin by activating skin cells and improving collagen/elastin turnover. Replicated clinical trials evidenced that PRT can significantly enhance the density, elasticity and thickness of both intrinsically aged and photoaged skin. Evidently, Vercilex® and Retilex-A® share a range of bioactivities, which underlies their synergistic activity observed in a clinical trial. Dual therapy with Nourella® tablets and cream produced higher effect sizes on skin characteristics than monotherapy with each of the two treatments. In conclusion, Nourella® cream and tablets are safe and effective treatments for skin ageing; however, combining the two in a ‘dual skin rejuvenation system’ significantly improves treatment outcomes.

Mast cells (MCs) are best known as key effector cells of immediate type allergic reactions that may even culminate in life-threatening anaphylactic shock syndromes. However, strategically positioned at host-environment interfaces and equipped with a plethora of receptors, MCs also play an important role in the first line defense against pathogens. Their main characteristic, the huge amount of preformed pro-inflammatory mediators embedded in secretory granules, allow for a rapid response and initiation of further immune effector cell recruitment. The same mechanism, however, may account for detrimental overshooting responses. MCs are not only detrimental in MC-driven diseases, but also responsible for disease exacerbation in other inflammatory disorders. Focusing on the skin as the largest immune organ, we herein review both beneficial and detrimental functions of skin MCs all the way from skin barrier integrity via host defense mechanisms to MC-driven inflammatory skin disorders. Moreover, we emphasize the importance of IgE-independent pathways of MC activation and their role in sustained chronic skin inflammation and disease exacerbation.

POH (Peri Orbital Hyperpigmentation) represents a minor clinical entity that attracts immense aesthetic damages and it generates social integration difficulties. This review focuses on the etiopathogenic causes of this entity, differentiating and reclassifying this defect as having, on the one hand, genetic causes of melanic hyperproduction – for Fitzpatrick cutaneous phototypes IV and V – and, on the other hand, both genetic and acquired vascular causes, in individuals with light-coloured skin phototypes. Hence, there is a big difference in the field of pathogenic treatment, for the two entities. In addition, this study notes the direct relationship between skin aging and POH, especially for aquired vascular causes. In this reasoning, other aesthetic deficiencies of the skin in the palpebral area should be also considered, like: blepharochalasis, wrinkles, the anatomical causes of the lower eyelid shading, symmetrical or asymmetric suborbital oedema. All of these issues will complicate the therapeutic decision and subsidiary, the pharmaceutical advice. In this context, the review shows the guidelines for a honest councelling of the patients, pointing the efficiency limit for the topical pharmaceutical medication (depigmentants, exfoliants) versus the necessity of minimally invasive or/ and surgical treatments (in blefarochalasis).

Abstract: Radiation-induced skin injury can be a serious cutaneous damage and have specific characteristics. Asymptomatic periods are classified as the latent stage. The skin barrier plays a critical role in the modulation of skin permeability and hydration and protects the body against a harsh external environment. However, an analysis on the skin barrier dysfunction against radiation exposure in the latent stage has not been conducted. Thus, we investigated whether skin barrier is impaired by irradiation in the latent stage and aimed to identify the molecules involved in skin barrier dysfunction. We analyzed skin barrier function and its components in SKH-1 mice that received 20 and 40 Gy local irradiation. Increased transepidermal water loss and skin pH were observed in the latent stage of the irradiated skin. Skin barrier components, such as structural proteins and lipid synthesis enzymes in keratinocyte, increased in the irradiated group. Interestingly, we noted sebaceous gland atrophy and increased serine protease and inflammatory cytokines in the irradiated skin during the latent period. This finding indicates that the main factor of skin barrier dysfunction in the latent stage of radiation-induced skin injury is sebaceous gland deficiency, which could be an intervention target for skin barrier impairment.

The effects of orally administered lactic acid bacteria metabolites on the skin were studied using an atopic dermatitis-like murine model created by feeding mice with HR-AD. The lactic acid bacteria metabolites were obtained by inoculating 35 strains of 16 species of lactic acid bacteria into soy milk and culturing them. The atopic dermatitis-like murine model was created by feeding HR-1 mice HR-AD for 40 days. The skin condition of mice that were fed HR-AD worsened compared with normal mice, i.e., reduced water content in the stratum corneum, increased transepidermal water loss (TEWL), reduced ceramide AP content in the stratum corneum, and increased epidermis thickness. When mice that had been fed the HR-AD diet was administered a raw liquid of lactic acid bacteria metabolites orally, the measured values related to water content in the stratum corneum, TEWL, ceramide AP content in the stratum corneum, and epidermis thickness improved. To find out the active components for these effects, filtrate and residue from the raw liquid of lactic acid bacteria metabolites and lipid components extracted from the raw liquid were examined at the same time. Results showed that the water-soluble components or residue after filtration did not demonstrate effects but the raw liquid and the lipid fraction did. These findings suggest that lactic acid bacteria metabolites improve skin injury in an atopic dermatitis-like murine model.

Introduction: There is no standardised, universal method to assess physical conditions such as pressure in the pelvicalyceal system in real time during RIRS (retrograde intrarenal surgery). Therefore, the problem concerning increased pressure in the upper urinary tract during the procedure is underestimated. Moreover, it potentially may cause micro-damage and longer postoperative recovery. The aim of this study was to evaluate intrapelvic pressure (IPP) during RIRS procedures. Materials and methods: The 3D printed models of the pelvicalyceal system were printed based on CT-scan of real patient. They were used to perform 50 RIRS procedures with laser lithotripsy of artificially synthesised kidney stones with two different sizes of ureteral access sheath-UAS (10/12Fr vs. 12/14Fr) together with different energy settings generated by the holmium:YAG laser. IPP monitoring during RIRS was performed with the use of the PressureWire X Guidewire compatible with the CoroFlow system. Results and Conclusions: The results showed that high IPP of up to 400 cmH2O would be achieved using a 10/12Fr UAS, while the use of a 12/14Fr UAS would significantly reduce the peak pressure to approximately 100 cmH2O, hence the size of the UAS is a pivotal factor of the IPP generated during the procedure.

Ledge formation presents a significant challenge in endodontic treatment. Yet, there is still a lack of educational tooth models for hands-on practice. This study aimed to create and evaluate a tooth model for ledge management practice. A natural tooth with curved roots was collected for scientific use under ethics committee approval. Following initial root canal preparation, the tooth was scanned using micro-computed tomography (μCT) and 3D reconstructed. A K-file, created via computer-aided design (CAD), was partly inserted into the root canal wall of the 3D-reconstructed tooth. By subtracting the K-file from the tooth, a tooth model with a root canal ledge was produced. The models were then 3D printed for a hands-on workshop. A seven-item Likert scale questionnaire was administered to 20 postgraduate students and 10 endodontists to assess the model's quality and training effectiveness. The feedback from both students and experts was positive, with no statistically significant differences found between the two groups (p > 0.05). This novel tooth model is expected to address the existing gap in endodontic education and provide benefits for dental practitioners in future applications.

Emollients are valued ingredients of many cosmetic products and medical devices used to support the treatment and prevention of many skin diseases. Despite the fact that they are one of the oldest cosmetic ingredients, raw materials as well as new recipe solutions are constantly being sought, the main goal of which is to obtain products with the most favorable physicochemical properties while improving the hydration of the stratum corneum and softening and smoothing the skin. This article presents the results of physicochemical tests of selected emollients: natural [Macadamia Integrifolia Seed Oil, Ricinus Communis Seed Oil, Prunus Amygdalus Dulcis, Vitis Vinifera (Grape) Seed Oil], semi-synthetic Caprylic/Capric Triglyceride and synthetic (Octyldodecanol, Dicaprylyl Carbonate, Dibutyl Adipate). Then, recipes for cosmetic oils were developed, differing in the type and concentration of emollients used. The obtained formulations were subjected to physicochemical tests (dynamic viscosity, surface tension, wetting angle, color assessment) and selected parameters of the epidermal barrier function (skin hydration and lubrication) were assessed. By appropriately selecting the type and concentration of emollients in the cosmetic oil recipe, it is possible to obtain products with the appropriate ability to spread on the skin, form a uniform protective layer on the skin and remain on the skin for a sufficiently long time. The observed improvement in skin hydration and the level of lubrication after using formulations containing mixtures of natural and semi-synthetic/synthetic emollients confirms that both groups of these raw materials can be components of cosmetic body oil recipes with an emollient effect, and the products themselves constitute an important element of the care of skin affected by the disease process.

Humans have extremely variable skin pigmentation and melanin production influenced by genetics, UV exposure, and some medications. A significant number of skin illnesses that result in pigmentary abnormalities have an impact on patients’ physical appearance as well as their psychological and social well-being. Skin pigmentation can be divided into two basic categories: hyperpigmentation, where pigment appears to overflow, and hypopigmentation, where pigment is reduced. Albinism, melasma, vitiligo, Addison's disease, and post-inflammatory hyperpigmentation, which can be brought on by eczema, acne vulgaris, and drug interactions, are the most common skin pigmentation disorders in clinical practice. Anti-inflammatory medications, antioxidants, and medications that inhibit tyrosine, which prevents the production of melanin, are all possible treatments for pigmentation problems. Skin pigmentation can be treated orally and topically with medications, herbal remedies, and cosmetic products, but a doctor should always be consulted before beginning any new medicine or treatment plan. This review article explores the numerous types of pigmentation problems, their causes, and treatments, as well as the 25 plants, four marine species, and 17 topical and oral medications now on the market that have been clinically tested to treat skin diseases.

In the bioprinting process, controlling the motion of bioprinters involves a computer-aided design (CAD) model, converting that model into g-code, and transmitting the motion commands to the bioprinters. The g-code file contains information about the motion of the axes and can be generated using various software. However, a challenge arises when using g-code between different bioprinters. Therefore, the objective of this study was to propose a reliable method for analyzing the differences in 3D bioprinting devices by parameterizing a crucial variable for extrusion bioprinting: the E-value. Four bioprinters from three different manufacturers were used to investigate the extrusion behavior when subjected to the same E-value.

Diagnosing skin lesions can be a challenging task. Dermatologic lesions are hard to differentiate especially for an untrained eye. However, carefully analyzing every aspect of the lesion can help clinicians reach an accurate diagnosis. If diagnosed correctly with the naked eye, many lesions can be treated without the need for further histopathology or investigations. Those aspects include morphology, color, distribution, configuration and arrangement, texture and consistency, and any evolutions or changes within the lesion. Clinicians must also contextualize those lesions into the patient’s history and overall systemic symptoms and signs. Risk factors should be taken into consideration and whether there are evolutionary changes in the lesions. Clinicians should also look for patterns as they might be the key to diagnosis. If definitive diagnosis is still not reached, biopsy, dermatoscopy, cultures, skin scrapings, patch testing, blood tests, and imaging studies may be necessary for confirmation. Integrating these methods with clinical judgment and patient history significantly enhances the accuracy of diagnosis in dermatology. Treatment for dermatologic lesions varies depending on the underlying cause.

Abstract The number of non-melanoma skin cancers (NMSC) removed from Australians is increasing every year. The number of deaths from NMSC is increasing but so is the population. However, the population has greatly changed with many people at low risk for skin cancer migrating to Australia. The death rate from NMSC for the entire population and susceptible populations since 1971 is examined in this article. Materials and methods Data on the Australian population was obtained from the Australian Bureau of Statistics (ABS). Every five years a census is held in Australia and detailed information of the population is provided. The ABS also provided yearly data on the causes of death in Australia. Results The total population increased from 12,755,638 in 1971 to 25,738,140 in 2021. However, the susceptible population increased by far less, from 12,493,780 to 19,773,783. The number of deaths from NMSC increased from 143 to 765. The crude death rate for the susceptible population increased for 1.1 per 100,000 to 3.9 per 100,000. The crude death rate in the susceptible population aged 65 or more increased from 9.4 to 18.2 per 100,000. Conclusion Deaths from NMSC are increasing despite public health campaigns to prevent skin cancer. On current trends, NMSC will cause more deaths than melanoma in Australia.

Recently scientific research began to shift their focus on looking at both the gut and the skin microbiota as having a reciprocal and integral relationship with one another, rather than assessing them as separate and unrelated fields. In the past five years, the field of microbial endocrinology emerged, which examines how our gut microbiota influences and modulates hormones. We’ve known for decades that hormones greatly affect the condition of the skin, and many skin conditions are often treated with oral hormonal therapy as means to internally treat skin conditions visible on the dermis. Now, a growing body research and discourse examining this triad of biological spheres – gut microbiota, skin microbiota, and the endocrine system – as interconnected rather than binary and unrelated. While there is ample research established and being conducted examining the gut-skin axis, the gut-brain axis, and the gut-hormone axis, through this paper I will review and synthesize some of the significant advancements in this emerging and inclusive field of science to suggest that the fields need to expand the axis and their modality for researching these fields as a connected whole in order to better understand the role of the microbiota in disease prevention as a whole.

In dermatological practice, disturbances of the skin microbiome are found in various infectious and inflammatory dermatoses featuring one or more skin lesions with loss of tissue, directly exposing skin layers to microbial invasions. Literature data on the incidence of cutaneous-onset sepsis are, however, scarce. This retrospective observational study assessed hospital admissions for primary skin lesions with vs. without bacterial infections and sepsis during 2020-2022 in the largest emergency hospital in NE Romania. Of 509 patients 441 had infected lesions, 78 had sepsis caused by venous ulcers microbial eczema cellulitis, superinfected bullous dermatoses, erysipelas, erythroderma. Cultured samples revealed S. aureus, P. aeruginosa, E. coli, with K. pneumoniae, S. β-hemolytic associated with sepsis even if rarer. Clinical manifestations included ulcerations, erosions, fissures, excoriations, bullae, vesicles, pruritus, tumefaction, edema, fever, chills, pain, adenopathy, mildly altered mental status. Underlying chronic heart failure, atrial fibrillation, anemia, type-1 diabetes mellitus were comorbidities associated with infection and sepsis. Significant associations and risk factors, including their combined effects, are discussed to draw attention to the need for further research and adequate management to prevent sepsis in adult patients of any age presenting with infected skin lesions (especially cellulitis) and comorbidities (especially type 1 diabetes mellitus and anemia).

Melasma is a challenging chronic skin condition associated with hyperpigmentation and un-known etiology. This scoping review mapped evidence of available treatments and their effectiveness in darker skin types. A comprehensive, systematic online search was conducted in Scopus, PubMed, CINAHL Complete, Cochrane, ScienceDirect, and Web of Science Core Collection. All eligible titles were exported to an Endnote20 library. Thematic content analysis was performed to summarise data on current melasma treatments for darker skin types. The quality of included articles was appraised using the Mixed Methods Appraisal Tool (MMAT) 2018 version. A total of 2863 articles were retrieved from the databases, and 10 met the eligibility criteria following abstract and full-text screening. Our findings demonstrate that topical treatments, chemical peels, lasers, and tranexamic acid are common treatment modalities used in darker skin types. Although these treatments may be effective in the short term, they bring about un-desirable side effects and sometimes worsen or result in reoccurrences of melasma. Based on the evidence mapped, current treatment modalities are not suitable for darker skin types. There are very few studies conducted on individuals of African descent. Further research is necessary to investigate treatment interventions which may be user-friendly when dealing with darker skin types.

Abstract: In complex revision total hip arthroplasties, careful preoperative planning is crucial for the proper reconstruction of hip biomechanics. With conventional 2D radiographic images and computed tomography (CT) the 3D extension of the defect and the remaining bone stock may not be evaluated properly. 3D printed models can aid the surgeon in planning complex acetabular re-construction. The purpose of this study is to compare the accuracy of bony defect assessment in severe acetabular defects surgery with 3D printing planning as compared to conventional 2D ra-diographic planning and CT. Twenty-five patients with severe acetabular defects (Paprosky IIC and III) undergoing revision surgery were enrolled. Each patient had a 3D printed model of their femur and pelvis created based on CT scans. Clinical and radiographic assessments were conducted before and after surgery, with four key bone landmarks measured and compared between X-ray, CT, 3D models, and surgical reports. The findings revealed discrepancies in defect assessment between different imaging methods. X-rays and CT scans sometimes incorrectly identified affected areas, while the 3D models showed more accurate results. This study suggests that 3D printed models can significantly improve the preoperative evaluation of complex hip arthroplasty revisions, enabling surgeons to better select optimal surgical strategies.

Accurate forecasts of ocean waves energy can not only reduce costs for investment but it is also essential for management and operation of electrical power. This paper presents an innovative approach based on the Long Short Term Memory (LSTM) to predict the power generation of an economical wave energy converter named “Searaser”. The data for analyzing is provided by collecting the experimental data from another study and the exerted data from numerical simulation of searaser. The simulation is done with Flow-3D software which has high capability in analyzing the fluid solid interactions. The lack of relation between wind speed and output power in previous studies needs to be investigated in this field. Therefore, in this study the wind speed and output power are related with a LSTM method. Moreover, it can be inferred that the LSTM Network is able to predict power in terms of height more accurately and faster than the numerical solution in a field of predicting. The network output figures show a great agreement and the root mean square is 0.49 in the mean value related to the accuracy of LSTM method. Furthermore, the mathematical relation between the generated power and wave height was introduced by curve fitting of the power function to the result of LSTM method.

Three-dimensional (3D) printing technology, also known as additive manufacturing (AM), has emerged as an attractive state-of-the-art tool for precisely fabricating functional materials with complex geometries, championing several advancements in tissue engineering, regenerative medicine, and therapeutics. However, this technology has an untapped potential for biotechnological applications, such as sensor and biosensor development. By exploring these avenues, the scope of 3D printing technology can be expanded and pave the way for groundbreaking innovations in the biotechnology field. Indeed, new printing materials and printers would offer new possibilities for seamlessly incorporating biological functionalities within the growing 3D scaffolds. Herein, we review the extrusion-based 3D printing modalities emphasizing biosensor applications. We highlighted the application of natural, synthetic, and composite biomaterials as 3D-printed soft hydrogels. Emphasis was placed on the approach by which the sensing molecules were introduced during the fabrication process. Finally, the future perspective was provided.

Synthesis of heterodinuclear 3d transition metal complexes in which two metal ions are introduced in equivalent coordination sites of a ligand is quite uncommon. We have previously shown that the application of the cis-trans isomerization of the oxamido group was able to furnish such a possibility. In the present paper we demonstrate that this synthetic pathway, relying on the possibility of changing the conformation (cis vs trans) of the oxamido group, can be extended to other ligands. Although we have not been able to structurally characterize these complexes, EPR and magnetic data do confirm the efficiency of this reaction pathway. We also demonstrate that the cis-trans isomerization of the oxamido group is not due to a particular property of the ion involved in the reaction. In fact, isomerization is governed by the basicity of the reaction medium. According to the reaction condition, it is possible to favor or not this phenomenon, and to increase the accessibility to a larger number of novel genuine complexes. But the oxophilic character of the lanthanide ions impedes this isomerization in 3d-4f complexes. The very weak magnetic interactions observed in these Cu-Gd complexes can be explained thanks to spin polarization.

This paper focuses on leveraging a cutting-edge 3D state-space model for a holistic eco-friendly assessment in petrochemical operations. - By applying the ecological carrying capacity theory and the three-dimensional state-space model, this research aims to unleash the next frontier of sustainability in the petrochemical industry. - The proposed methodology will enable advanced and comprehensive eco efficiency evaluation in petrochemical operations. - Through the integration of the ecological carrying capacity theory and advanced modeling techniques, this research seeks to revolutionize sustainability assessments in the petrochemical sector. - The utilization of the cutting-edge 3D state-space model will provide a more advanced and accurate understanding of eco-friendly practices in petrochemical operations. This research presents a unique approach distinct from existing literature, which primarily examines business eco efficiency from behavioral motivation and strategic perspectives. In contrast, this paper introduces a novel three-dimensional state-space model to evaluate the ecological efficiency of petrochemical operations. By combining the ecological carrying index and state space, this model represents the ecological impact of petrochemical operations in a three-dimensional geometric space. It considers petrochemical operations as a significant factor exerting pressure on natural resources and the natural environment. In this three-dimensional state-space model, the three axes represent different dimensions of petrochemical operations. The first axis represents the economic status, which quantitatively describes the financial aspects of the operation. The second axis represents the utilization of resources, capturing the extent to which resources are consumed in the operation. The third axis focuses on the impact of the operation on the environment, allowing for a quantitative assessment of its ecological footprint. By incorporating these dimensions, the model aims to provide a comprehensive and quantitative description of the economic activities of petrochemical operations and their interactions with resources and the environment.The primary focus of this research is to apply the three-dimensional state-space model to calculate the ecological carrying capacity of petrochemical operations. By doing so, it aims to verify the feasibility and applicability of the model in determining the ecological efficiency of these operations. The research also aims to provide theoretical tools that can assist operations in making more informed ecological efficiency judgments. By utilizing this model, petrochemical operations will have a quantitative framework to assess and improve their environmental impact, thus fostering more sustainable practices. The findings of this research demonstrate that the implementation of this method can effectively identify issues related to resources, economy, and environment throughout the development of petrochemical operations. By identifying these problems, it provides managers with a solid foundation for making strategic decisions that promote sustainable development. With this valuable information at their disposal, managers can proactively address challenges, optimize resource utilization, and minimize environmental impacts, thus steering the petrochemical operations towards a more sustainable and responsible path.

Based on three-dimensional optical proximity correction (3D OPC), recent advancements in 3D lithography have enabled the high-fidelity customization of 3D micro-optical elements. However, micron-to-millimeter scale structures represented by Fresnel lens design bring more stringent requirements for 3D OPC, which poses significant challenges to the accuracy of models and the efficiency of algorithms. Thus, a lithographic model based on optical imaging and photo-chemical reaction curve is developed in this paper, and a sub-domain division method with a statistics principle is proposed to improve the efficiency and accuracy of 3D OPC. Both the simulation and the experimental results showed the superiority of the proposed 3D OPC method in the fabrication of the Fresnel lenses. The computation memory requirements of the 3D OPC are reduced to below 1 %, and the profile error of the fabricated Fresnel lens reduced 79.98%. Applying the Fresnel lenses to an imaging system, the average peak signal to noise ratio (PSNR) of the image increased by 18.92 %, and the average contrast of the image enhanced by 36 %. We believe the proposed 3D OPC method can be extended to the fabrication of vision-correcting ophthalmological lenses.

Melasma is a common skin disorder of acquired hyperpigmentation that appears commonly on the face. Although asymptomatic, melasma causes psychosocial and emotional distress. This study aimed to assess melasma's severity on people with darker skin types, evaluate the effects of melasma on the Quality of Life (QoL), and establish QoL predictors in affected individuals. This was a cross-sectional analytic study that enrolled 150 patients who were diagnosed with melasma from three private dermatology clinics in Durban, South Africa. The severity of melasma and QoL were measured using a Melasma Area and Severity Index (MASI) score, and Melasma Quality of Life scale (MELASQoL), respectively. The factors associated with impaired QoL were also explored using the multivariate method and stepwise regression analysis. MASI score of Masi (β = 0.209, t = 2.628, p < .010), involvement of cheeks (β = -0.268, t = -3.405, p <.001), level of education (β = -0.159, t = -2.029, p =.044) and being menopausal (β = -0.161, t = -2.027, p =.045) were found to be predictors of QoL. A regression model to predict MELASQoL given these four predictors was developed. The significance of the equation can allow remote scoring of MELASQoL based on the four variables.

Pain is a major problem in sick newborn infants, especially for those needing intensive care. Pharmacological pain relief is the most commonly used but may be ineffective, have side effects, including long-term neurodevelopmental sequelae. The effectiveness and safety of alternative analgesic methods are ambiguous. The objective is to review the effectiveness and safety of non-pharmacological methods of pain relief in newborn infants and to identify those that are the most effective. PubMed and Google Scholar were searched using the terms: ‘infant’, ‘premature’, ‘pain’, ‘acupuncture’, ‘skin to skin contact’, ‘sucrose’ ‘massage’, ‘musical therapy’ and ‘breastfeeding’. We included 24 studies assessing different methods of non-pharmacological analgesic techniques. Most resulted in some degree of analgesia but many were ineffective and some were even detrimental. Sucrose, for example, was often ineffective but more effective than music therapy, massage, breast milk (for extremely premature infants) or non-invasive electrical stimulation acupuncture. There were also conflicting results for acupuncture, skin to skin care and musical therapy. Most non-pharmacological methods of analgesia provide some modicum of relief for preterm infants but none are completely effective and there is no clearly superior method. Study is also required to assess potential long-term consequences of any of these methods.

Psoriasis is a chronic immune-mediated skin disease that involves interaction of both immune and skin cells, and is characterized by cytokine-driven epidermal hyperplasia, deviant differentiation, inflammation and angiogenesis. Because available treatments for psoriasis have significant limitations, dietary products are potential natural sources of therapeutic molecules, which can rescind molecular defects associated with psoriasis and could be developed for its management. Fisetin (3,7,3′,4′- tetrahydroxyflavone), a phytochemical naturally found in pigmented fruits and vegetables has demonstrated pro-apoptotic and antioxidant effects in several malignancies. This study utilized biochemical, cellular, pharmacological and tissue-engineering tools to characterize the effects of fisetin on normal human epidermal keratinocytes (NHEKs), peripheral blood mononuclear cells (PBMC) and CD4+ T lymphocytes in 2D and 3D psoriasis-like disease models. Fisetin treatment of NHEKs dose and time-dependently induced differentiation and inhibited interleukin-22-induced proliferation, as well as activation of the PI3K/Akt/mTOR pathway. Fisetin treatment of TNF-α-stimulated NHEKs significantly inhibited the activation of p38 and JNK, but had no effect on ERK1/2. In addition, fisetin treatment significantly decreased the secretion of Th1/Th-17 pro-inflammatory cytokines, particularly IFNγ and IL-17A by 12-O- tetradecanolylphorbol 13-acetate (TPA)-stimulated NHEKs and anti-CD3/CD28-activated human PBMCs. Furthermore, we established the in-vivo relevance of fisetin functions, using a 3D full-thickness human skin model of psoriasis (FTRHSP) that closely mimics in-vivo human psoriatic skin-lesions. Herein, fisetin significantly ameliorated psoriasis-like disease features, and decreased the production of IL-17 by CD4+ T lymphocytes co-cultured with FTRHSP. Collectively, our data identify pro-differentiative, anti-proliferative and anti-inflammatory effects of fisetin, via modulation of PI3K-Akt-mTOR and p38/JNK pathways and the production of cytokines in 2D and 3D human skin model of psoriasis. These results suggest that fisetin has a great potential to be developed as an effective and inexpensive agent for the treatment of psoriasis and other related inflammatory skin disorders.

This study aimed to develop chitosan-based apigenin spray dried solid dispersion using 1:1,1:1.5,1:2 w/w ratios. The results of process yield and drug assay were found to be (87.5%, 94.2%, and 95.86%), (95.2 ±1.34%), (99.5 ±0.85%), and (97.6 ±2.42%), respectively, for AC1, AC2, and AC3. Flow properties indicate the free flow of powders. FTIR revealed compatibility among chitosan and apigenin, and DSC and XRD showed prepared solid dispersion was on a molecular level and available in amorphous. In contrast, SEM images reflect irregular block and near-spherical shape elongated particles in the selected AC2. The antimicrobial examination reflects that AC2 was more effective against Gram-positive, negative, and fungal strains. AC2 SDSDs has more anti-oxidant property compared to pure flavonoid (AGN). Anti-proliferative activity against A549 lung cancer cell lines showed better anti-cancer activity by AC2 SDSDs. The selected AC2 SDSD filled in a 3D shell pill and further characterized for 3D shell pill for dissolution profiles and stability studies. The product has sustained release and similar release profiles after three months of storage. The findings suggest that the AC2 SDSDs may be a promising candidate for further development as a 3D printed drug delivery system for treating multiple disease conditions using model flavonoid- apigenin.

We conducted a research study to create groundwork for personalized solutions within skin aging segment. This test utilises genetic and general laboratory data to predict individual susceptibility of weak skin characteristics, leveraging on the research on genetic polymorphisms related to skin functional properties. A cross-sectional study was conducted in collaboration between the Private Clinic Medicina Practica Laboratory (Vilnius, Lithuania) and the Public Institution Lithuanian University of Health Sciences (Kaunas, Lithuania). 370 participants agreed to participate in the project. The median age of respondents was 40, with a range of 19 to 74 years. After the literature search, we selected 15 polymorphisms of the genes related to skin aging subsequently distributed for different skin functions: SOD2(rs4880), GPX1(rs1050450), NQO1(rs1800566), CAT (rs1001179), TYR (rs1126809), SLC45A2 (rs26722), SLC45A2 (rs16891982), MMP1(rs1799750), ELN (rs7787362), COL1A1(rs1800012), AHR (rs2066853), IL6 (rs1800795), IL1Beta (rs1143634), TNF-α (rs1800629), AQP3(rs17553719). RT genotyping, blood count and immunochemistry results have been analysed using statistical methods. Obtained results showed significant associations among genotyping models and routine blood screens. These findings demonstrate the personalized medicine approach for aging segment and further add onto the growing field of literature. Further investigation is warranted to fully understand the complex interplay between genetic factors, environmental influences, and skin aging.

Background Due to the COVID-19 pandemic, teledermoscopy has been increasingly used in the remote diagnosis of skin cancers. In a study conducted in 2020, we demonstrated a potential role of an inexpensive device (NurugoTM Derma) as a first triage to select the skin lesions that require a face-to-face consultation with dermatologists. Herein, we report the results of a novel study that aims to better investigate the performance of NurugoTM. Objectives i) verify whether the NurugoTM can be a communication tool between the General Practitioner (GP) and dermatologist in the first assessment of skin lesions; ii) analyze the degree of diagnostic-therapeutic agreement between dermatologists; iii) estimate the number of potentially serious diagnostic errors. Methods One hundred forty-four images of skin lesions were collected at the Dermatology Outpatient Clinic in Novara using a conventional dermatoscope (instrument F), the NurugoTM (instrument N), and the latter with the interposition of a laboratory slide (instrument V). The images were evaluated in-blind by four dermatologists, and each was asked to make a diagnosis and to specify a possible treatment. Results: Our data show that F gave higher agreement values for all dermatologists, concerning the real clinical diagnosis. Nevertheless, a medium/moderate agreement value was obtained also for N and V instruments and that can be considered encouraging and indicate that all examined tools can potentially be used for the first screening of skin lesions. The total amount of misclassified lesions was limited (especially with the V tool), with up to nine malignant lesions wrongly classified as benign. Conclusions NurugoTM, with adequate training, can be used to build a specific support network between GP and dermatologist or between dermatologists. Furthermore, its use could be extended to the diagnosis and follow-up of other skin diseases, especially for frail patients in emergencies such as the current pandemic context.

Despite being small and simple structured in comparison to their victims, virus particles have the potential to harm severly and even kill highly developed species such as humans. To face upcoming virus pandemics, detailed quantitative biophysical understanding of intracellular virus replication mechanisms is inevitable. Unveiling the relationship of form and function might allow to determine putative attack points relevant for the systematic development of direct antiviral agents (DAA) and potent vaccines. Biophysical investigations of spatio-temporal dynamics of intracellular virus replication so far are rare. We are developing a framework to allow for fully spatio-temporal resolved virus replication dynamics simulations based on partial differential equations models (PDE) and evaluated with advanced numerical mathematical methods on leading supercomputers. This study presents an advanced highly nonlinear model of the genome replication cycle of a specific RNA virus, the Hepatitis C virus (HCV). The diffusion-reaction model mimics the interplay of the major components of the viral RNA (vRNA) cycle, namely non structural viral proteins (NSP), vRNA and a generic host factor. Technically, we couple surface PDEs (sufPDEs) on the 3D embedded 2D Endoplasmatic Reticulum (ER) manifold with PDEs in the 3D membranous web (MW) and cytosol volume. (The MWs are the replication factories growing on the ER induced by NSPs.) The sufPDE/PDE model is evaluated at realistic reconstructed cell geometries which are based on experimental data. The simulations couple the effects of NSPs which are restricted to the ER surface with effects appearing in the volume. The volume effects include the host factor supply from the cytosol and the MW dynamics. Special emphasis is put to the exchange of components between ER surface, MWs and cytosol volume. As the vRNA spatial properties are not fully understood so far in experiment, the model allows for vRNA both restricted to the ER and moving in the cytosol. The visualization of the simulation resembles a look into some sort of fully 3D resolved “in silico microscopes” to mirror and complement in vitro / in vivo experiments for the intracellular vRNA cycle dynamics. The output data are quantitatively consistent with experimental data and provoke advanced experimental studies to validate the model.

Repeated air pollution exposure is one of the major threats to skin health. Air pollution causes skin damage and accelerates skin ageing mainly through oxidative stress mechanisms. Since it is difficult to minimize skin exposure from air pollutants, especially in urban areas, strategies to protect the skin are needed. On the other hand, plant phenolic compounds have been found to be effective in attenuating cellular oxidative stress and inflammation induced by different air pollutants. Therefore, we conducted a 12-week randomized, placebo-controlled, double blind study to assess the efficacy of a polyphenol-enriched dietary supplement (comprised of olive leaf, lemon verbena, rosemary and Sophora japonica extracts) in reducing pollution-induced oxidative stress and in improving different skin parameters related to skin ageing of Caucasian and Asian volunteers living in a polluted urban European area (Milan). One hundred healthy women were recruited and randomized in the placebo or in the test dietary supplement treatment arms. To assess the efficacy of the dietary supplement, the total antioxidant capacity on saliva (FRAP) was determined, as well as the oxidative damage on skin (lipoperoxides content), the skin moisture (corneometry), the trans-epidermal water loss (Tewameter), the skin radiance and the skin colour, (spectrophotometry), the skin elasticity (cutometry), the skin sebum content (sebumeter), and the skin roughness (image analysis). As a result, both inter-group and intra-group analysis proved that the dietary supplement improved all clinical and biochemical monitored parameters, in both Caucasian and Asian individuals. In conclusion, the results of the study indicate a reduced oxidative stress-induced skin damage in both Asian and Caucasian women living in a polluted urban area.

Depending on human body conditions and environmental conditions, it is sometimes difficult to conduct subject experiments. In such cases, it is effective to use a thermal manikin. There are few studies that investigate the effect of the non-uniform and asymmetric outdoor thermal environment on the mean skin temperature. The purpose of this study is to clarify the influence of the non-uniform and asymmetric thermal radiation of short-wavelength solar radiation in an outdoor environment on the calculation of the mean skin temperature. The skin temperature of the front of the coronal surface, which was facing the sun and where the body received direct short-wavelength solar radiation, and the skin temperature of the rear of the coronal surface, which was in the shadow and did not receive direct short-wavelength solar radiation were respectively measured. The feet, upper arm, forearm, hand and lower leg, which are susceptible to short-wavelength solar radiation in a standing posture, had a noticeable difference in skin temperature between sites in the sun and in shade. The mean skin temperature of sites facing the sun was significantly higher than the mean skin temperature of those in the shade.

While Neural Radiance Fields (NeRF) are gaining increasing interest in various domains as innovative methods for novel view synthesis and image-based reconstruction, their potential application in the realm of Cultural Heritage remains unexplored. Purpose of this paper is to assess the effectiveness of applying NeRF to sets of images of digital heritage objects and sites. The study’s findings demonstrate that NeRF could be valuable when used in combination with or as a comparison to other well-established techniques such as photogrammetry, to expand the possibilities of preserving and presenting heritage assets with enhanced visual fidelity and accuracy. Particularly, NeRF show promising results in improving the rendering of translucent and reflective surfaces, objects with homogeneous textures, and elements with intricate details. In addition, we demonstrate that, when considering the same set of input images (with known camera poses), reducing the image quality or the number of images results in significantly less information loss with NeRF compared to photogrammetry. This suggests that NeRF is preferentially suited for scenarios involving sparse information or low-quality photos or videos, which could be especially valuable in risky or challenging situations.

3D printing is playing an important role in cardiovascular disease by use of personalised models with replication of normal anatomy and pathology with high accuracy and reliability. While 3D printed heart and vascular models are shown to improve medical education, preoperative planning and simulation of cardiac procedures, and enhance communication with patients, 3D bioprinting however, represents a potential advancement of 3D printing technology by printing cellular or biological components, functional tissues and organs that can be used in a variety of applications in cardiovascular disease. Recent advances in bioprinting technology have shown the ability to support vascularisation of large scale constructs with enhanced biocompatibility and structural stability, thus creating opportunities to replace damaged tissues or organs. In this review, we provide an overview of the use of 3D bioprinting in cardiovascular disease with a focus on technologies and applications in cardiac tissues, vascular constructs and grafts, heart valves and myocardium. Limitations and future research directions are highlighted.

Tumor cells evolve in a complex and heterogeneous environment composed of different cell types and an extracellular matrix. Current 2D culture methods are very limited in their ability to mimic the cancer cell environment. In recent years, various 3D models of cancer cells have been developed, notably in the form of spheroids/organoids, using scaffold or cancer-on-chip devices. However, these models have the disadvantage of not being able to precisely control the organization of multiple cell types in complex architecture and are sometimes not very reproducible in their production, and this is especially true for spheroids. Three-dimensional bioprinting can produce complex, multi-cellular, and reproducible constructs in which the matrix composition and rigidity can be adapted locally or globally to the tumor model studied. For these reasons, 3D bioprinting seems to be the technique of choice to mimic the tumor microenvironment in vivo as closely as possible. In this review, we discuss different 3D-bioprinting technologies, including bioinks and crosslinkers that can be used for in vitro cancer models, and the techniques used to study cells grown in hydrogels; finally, we provide some applications of bioprinted cancer models.

Background: The main objective of this study is to develop a customized metatarsophalangeal implant for the treatment of various conditions affecting this specific joint. This approach involves replacing the joint with a custom implant designed specifically to fit each patient's unique anatomical structure. The need for custom implants stems from the obvious lack of size variety available, which presents a major challenge when, the search for the ideal size implant can be a hard task, also when considering the possibility of extensive modification of the bone to adapt it to the available implant. This adaptation, often synonymous with bone reduction, can cause significant post-operative pain for the patient and impact healing time. Methods: A comparative study of modeling software was carried out to select the perfect software, by defining and comparing the relevant criteria. Similarly, the different biomaterial options were examined and compared to select the one best suited to this project, mentioning the imaging modality used to determine the types of images used for our approach. Finally, the 3D printers used in this work were represented, highlighting their technical characteristics. Findings: A resin metatarsophalangeal implant prototype was created using 3D modeling and reconstruction software and tools. Interpretation: Reconstruction and 3D modeling techniques are revolutionizing implant creation, offering customized solutions for patients suffering from metatarsophalangeal joint disorders caused by a wide range of diseases. These results have significant implications for disability management and rehabilitation, encouraging further exploration and progress.

Phenolic compounds represent a group of secondary metabolites that serve essential functions in plants. Beyond their positive impact on plant, these phenolic metabolites, often referred to as polyphenols, possess a range of biological properties that can promote skin health. Scientific research indicates that using phenolics derived from plants topically can be advantageous, but the activity and stability highly depend on storage of the source material and the extract method. These compounds have the ability to relieve symptoms and hinder the progression of different skin diseases. Because they come from natural sources and have minimal toxicity, phenolic compounds show potential in addressing the causes and effects of skin aging, skin diseases, and various types of skin damage, such as wounds and burns. Hence, this review provides an extensive information of the particular crops from which by-product phenolic compounds can be sourced, but pointing the need investigation according to a proper storage plant material and the choice of the best extracting method, along with an examination of their specific functions and the mechanisms by which they act to protect skin.

The properties of the current-induced Hall effect are analysed, for which the static magnetic field, supplied by an external source in the traditional experiment, is created by the current itself. The special experimental setup, needed for its observation, is described. It is shown how, combined with the skin effect, it could give access to the concentration of conduction electrons in superconductors. Besides this experiment might permit to dodge shortcomings, ensueing from the Meissner effect and limiting severely the sensitivity of the conventional Hall voltage measurement.

Knowing that biomolecules, such as β-amyrin and α-amyrin, have some pharmacological effects, the aim of this study was directed towards exploring the protective effect of a Tomato Peel and Seed Extract (TPSE) for its soothing function but also for its capacity to modulate the adrenal axis, involved in stress response. Ex vivo tests were carried out on skin explants to evaluate the effectiveness of TPSE formulated at 0.5% on Calcitonin Gene-Related Peptide (CGRP) and IL-10 release, Kappa Opioid Receptor (KOR) and Caspase 14 expression. An in vivo study combined a clinical evaluation of skin homogeneity, psychological parameter as well as analysis of salivary cortisol and dehydroepiandrosterone concentrations. All measurements were carried out at the beginning and after 28 days of applying a TPSE face cream. TPSE regulated not only the release of CGRP and Il-10, reflecting an anti-neurogenic and anti-inflammatory properties, but also modulated KORs. Twenty height days of TPSE application induced a significant decrease in intensity and extent erythrosis, a lower output of salivary cortisol and a significant increase in pleasant emotions when compared to placebo. These results provide encouragement to continue exploring the impact of cosmetic ingredient on psychophysiological parameters to improve skin health and well-being.

Wound healing in the pediatric population is known to be a challenge and poorly studied. Split-thickness skin grafts, full-thickness skin grafts and flaps overlap their applications with the growing field of cellular and tissue-based therapies. However, their role in pediatric reconstruction has yet to be defined. The Kerecis® Omega3 wound patch, derived from decellularized codfish skin, has garnered attention due to its preserved microscopic architecture resembling the human extracellular matrix. This acellular dermal matrix acts as a scaffold, fostering dermal cell and capillary adhesion while harnessing omega-3 polyunsaturated fatty acids for granulation acceleration and antimicrobial effects. This study presents a comprehensive review and surgical protocol for utilizing Kerecis® fish skin in pediatric wound care. The research embraces a case series involving five patients with diverse wound locations. The Kerecis® Omega3 wound patch underwent meticulous application and careful monitoring. The results highlight an average time of 48.6 days for complete epithelialization, yielding favorable outcomes with no hypertrophic scarring and mild retraction. Notably, this innovative approach may eliminate donor site morbidity and improve pain control, promising a novel avenue for pediatric wound management.

Myeloid neoplasms and acute leukemias include different entities that have been recently re-classify taking into account molecular and clinicopathological features. The myelodysplastic syndrome/myeloproliferative neoplasm (MDS/MPN) category comprises a heterogeneous group of hybrid neoplastic myeloid diseases characterized by the co-occurrence of clinical and pathologic features of both myelodysplastic and myeloproliferative neoplasms. The most frequent entity in this category is chronic myelomonocytic leukemia (CMML) which is, after acute myeloid leukemia (AML), the main myeloid disorder prone to develop cutaneous manifestations. Skin lesions associated with myelodysplastic and myeloproliferative neoplasms include a broad clinical, histopathological and molecular spectrum of lesions, poorly understood and without a clear-cut classification in the current medical literature. The aim of this review is to describe and classify the main clinical, histopathological and molecular patterns of cutaneous lesions in the setting of MDS/MPN in order to improve the diagnostic skills of dermatologists, hematologist and pathologist who deal with these patients.

Trend patterns of melanoma skin in Serbia from 1999 to 2020 *Rancic K. Natasa 1,2, Tiodorovic B. Danica 1,4, Ilic V. Mirko 2, Biljana N. Kocic 1,2, Maksimovic S. Natasa 3, Ilija D. Kocic 4, Dusan P. Miljkovic 4, Otasevic A. Suzana 1,2 Introduction. Melanoma of the skin represents about 1% of all skin cancers and it causes nearly 80% of skin cancer deaths. Due to its increasing incidence, particularly in the most developed countries it represents a great challenge for primary prevention. Objective. To explore patterns and analyze incidence trends of melanoma in Central Serbia from 1999 to 2020. Materials and Methods. Descriptive study was done and data were obtained from the Population-based Cancer Registry of Serbia. The joinpoint regression analysis was done to assess the incidence trend of the melanoma skin: the annual percent change (APC) along with its 95% confidence interval (95% CI) was calculated. Results. A total number of 9952 new melanoma cases were registered melanoma (5204 in males and 4748 in females) during the observed period. Males represented 52.3% of all patients, with male to female ratio of incidence 2.09:1. A non significant increasing trend of incidence in males from 1999 to 2013 with APC of 2.53% (95%CI: from -18.2 to 21.9, p=1) and significantly increasing trend from 2013 to 2020 with the APC of 11.29 % (95%CI: from 1.4 to 5.8, p<0.001) was established. An incidence trend in females has stabilized in the whole studied period, with APC of 0.42% (95%CI: from -3.3 to 6.8, p=0.1). Melanoma of the skin was not common before the age of 30. Out of all cases and about of 76% new cases were diagnosed in persons ≥ 50 years of age. Conclusion. The incidence trend of new melanoma cases significantly increase in the whole population from 1999 to 2020. The significant increasing of incidence trend in males and stabilization of incidence trend in females was established. Males had significantlly higher incidence rates than femalesand over of 76% new melanoma cases were diagnosed in persons above 50 years of age.

Foot lesions are among the most frequent causes of morbidity and disability in the diabetic population. Thus, exploration of means of preventive control are vital for detecting early signs and symptoms of this disease, Infrared thermography has been proven effective in the control of diabetic foot is among the complementary diagnostic tools available for this disease. The last review on this topic was published in 2015 and so, here we conducted a bibliographic review of the main databases (PubMed, the Web of Science, Cochrane library, and Scopus) during the third quarter of 2023. We aimed to identify the effectiveness of infrared thermography as a diagnostic element in pre-ulcerous states in diabetic patients and to detect diabetic foot ulcer complications. We obtained a total of 200 articles, 22 of which were included in this present review; 17 articles had been published after 2017. After analysing the use of infrared Thermography in diabetic patients both with and without ulcers, as well as in healthy individuals, we concluded that is an effective tool for detecting early-stage ulcers in diabetic foot patients.

Skin cancer is a disease that reflects most malignant neoplasms worldwide, whose rate of involvement has increased significantly in recent decades. Treatments that offer efficient results with attenuation of adverse reactions and greater patient compliance have been the subject of many systematic investigations. This review aims to qualitatively present published works that showed new strategies to increase the penetration power of natural substances through the skin in the topical treatment against skin cancer. In this sense, nanoengineering mechanisms, the iontophoresis technique, and photodynamic therapy using natural products (NP) contribute to new knowledge about substance carrier strategies in topical treatments against skin cancer.

Malassezia is lipid-dependent commensal yeast of the human skin. The different culture media and skin sampling methods used to grow these fastidious yeasts are a source of heterogeneity in culture-based epidemiological study results. This study aimed to compare the performances of three methods of skin sampling, and two culture media for the detection of Malassezia yeasts by culture from the human skin. Three skin sampling methods, namely sterile gauze, dry swab and TranswabTM with transport medium, were applied on 10 healthy volunteers. Each sample was further inoculated onto either the novel FastFung medium or the reference Dixon agar for the detection of Malassezia spp. by culture. At least one colony of Malassezia spp. grew on 93/300 (31%) of the cultures, corresponding to 150 samplings. The positive culture rate was 67%, 18%, and 15% (P &lt; 10-3), for samples collected with sterile gauze, TranswabTM, and dry swab, respectively. The positive culture rate was 62% and 38% (P &lt; 0.003) by using the FastFung and the Dixon media, respectively. Our results showed that sterile gauze rubbing skin sampling followed by inoculation on FastFung medium should be implemented in the routine clinical laboratory procedure for Malassezia spp. cultivation.

Abstract: Ultraviolet (UV) induces skin photoaging, which is characterized by thickening, wrinkling, pigmentation, and dryness. Astaxanthin, a ketocarotenoid from Haematococcus pluvialis, has been extensively studied with respect to its possible effect on skin health as well as UV protection. In addition, astaxanthin attenuates increases in the generation of reactive oxygen species (ROS) and capillary regression of skeletal muscle. In the present study, we investigated whether astaxanthin would protect UV-induced photoaging and capillary regression in the skin of HR-1 hairless mice. UV induces wrinkle formation, thickness and capillary regression in dermis of hairless mice and the administration of astaxanthin decreased the UV-induced wrinkle formation, skin thickness, and increase in collagen fibers in skin. Astaxanthin supplementation also inhibited the levels of ROS generation and attenuated the decreases in wrinkle formation, thickness and capillary number in the skin. We also found an inverse correlation between wrinkling and capillary number, and the photoaging associated with capillary regression in skin. These results suggest that astaxanthin can protect against photoaging caused by ultraviolet irradiation and the effects of astaxanthin in photoaging inhibition may be associated with the protection of capillary regression in skin.

Data on the KIT mutation rate in skin melanoma in the central European region is missing. Accordingly, in a cohort of 79 double wild type (BRAF/NRAS) skin melanoma KIT mutation was assessed by Sanger sequencing of exons 9,11,13,17 and 18. In this skin melanoma cohort KIT mutation frequency was found to be 34/79 (43%) with a significantly higher rate in acrolentiginous melanoma (ALM) as compared to UV-induced common variants (20/34, 58.8% versus 14/45, 31.1%, p=0.014). Exon 11 was the most frequent mutation site (44.7%) followed by exon 9 (21.1%) equally characterizing UV-induced common histotypes and ALM tumors. KIT mutation hotspots were identified in exon 9 (c491/492), in exon 11 (c559,c572, c570), in exon 13 (c642), in exon 17 (c822) and in exon 18 (c853). The relatively high KIT mutation rate in skin melanoma in this central-European cohort justifies regular testing of this molecular target.

Onchocerciasis causes debilitating pruritus and rashes as well as visual impairment and blindness . Prior to control measures, eye disease was particularly prominent in savanna areas of sub-Saharan Africa whilst skin disease was more common across rainforest regions of tropical Africa. Mass drug distribution with ivermectin is changing the global scene of onchocerciasis. There has been successful progressive elimination in Central and Southern American countries and the World Health Organization has set a target for elimination in Africa of 2025. This literature review was conducted to examine progress regarding onchocercal skin disease. PubMed searches were performed using keywords "onchocerciasis", "onchodermatitis" and "onchocercal skin disease" over the past eight years. Articles in English, or with an English abstract, were assessed for relevance, including any pertinent references within the articles. Recent progress in awareness of, understanding and treatment of onchocercal skin disease is reviewed with particular emphasis on publications within the past 5 years. The global burden of onchodermatitis is progressively reducing and is no longer seen in children in many formerly endemic foci.

Manufacturing of facial epithesis is a complex technological process including several traditional stages of production, accompanied by aggravated psycho-emotional status of the patient. One of the main factors causing discomfort in patients with facial defects is the process of obtaining silicone impressions from the wound surface and the long waiting period for the final epithesis. Active development of digital technologies in medicine and dentistry helps specialists not only to automate most of the traditional stages of manufacturing of dento-mandibular and facial prostheses, but also improves the quality of life of patients by increasing the efficiency of services and reducing the production time of prosthetic structures. The application of digital technologies in the production of facial epithesis was difficult due to the lack of specialized 3D-software for modeling and material for further additive manufacturing of structures. The authors developed a unique technology for 3D modeling and additive manufacturing of facial epithesis, including a 3D CAD module and material for 3D printing. The primary objective was to fabricate immediate facial prostheses in the postoperative period in the shortest possible time until the final epithesis was fabricated.

The present study aimed to characterize the microstructure of a temporary 3D printing resin (Resilab Temp), evaluating the optical properties and mechanical behavior according to different post-processing curing times. For the analysis of the surface microstructure and establishment of the best printing pattern, samples in bar format following ISO 4049 (25 x 10 x 3 mm) were designed in CAD software (Rhinoceros 6.0), printed on the W3D printer (Wilcos), and light-cured in Anycubic Photon at different times (without curing, 16 minutes, 32 minutes, and 1 hour). For the structural characterization, analyses were carried out in FTIR (Fourier Transform Infrared Spectroscopy) and Scanning Electron Microscopy (SEM). The mechanical behavior of the resin was based on flexural strength tests and Knoop microhardness. Color and translucency analysis were performed with a spectrophotometer (VITA Easy Shade Advanced 4.0), which was evaluated following CIELab, using gray, black, and white backgrounds. All analyses were performed immediately after making the samples and repeated after thermal aging with 2 thousand cycles (5-55 °C). The results obtained were statistically analyzed with a significance level of 5%. FT-IR analysis showed about a 46% degree of conversion on the surface and 37% in the center of the resin sample. The flexural strength was higher for the groups polymerized for 32 min and 1h, while the Knoop microhardness did not show a statistical difference between the groups. Color and translucency analysis also did not show statistical differences between groups. According to all the analyses carried out in this study, for the evaluated material, the post-polymerization time of 1 hour can be suggested to improve the mechanical performance of 3D-printed devices.

In recent years, Additive Manufacturing (AM), commonly referred to as 3D printing, has garnered the attention of the scientific community due to its capacity to transform ordinary and traditional items into customized materials at an affordable cost, through various AM processes. Antimicrobial/antibiofilm 3D printed materials are one of the most trending research topics, owing to the growing concerns over the emergence of complex microbial structures called "biofilms" on various surfaces. The review provides an overview of the evolution of additive manufacturing (AM) technologies and their various derivatives, along with a brief description of their materials and applications. It also introduces how biofilms can represent an advantageous lifestyle for microbial populations. The primary objective of this research was to conduct a systematic review on the development of planctonic or biofilm forms of microorganisms on 3D printed materials. The article summarizes commonly studied microorganisms on these materials and presents their 3D printing process, materials, as well as the fields covered by each of the analyzed papers. To the best of our knowledge, this is the first all-inclusive systematic review that amalgamated research conducted in diverse fields to assess the development of biofilms on surfaces produced through three-dimensional printing. Most notably, this review presents a comprehensive account of sustainable approaches for producing antimicrobial materials through 3D printing. Additionally, we assess their advancements in various fields such as medicine, environment, agri-food, and other relevant sectors. The findings of our literature review can be used to recommend appropriate microorganisms, 3D printing materials, and technologies for academic and industrial research purposes focusing on the development of microbial biofilms on 3D printed surfaces. Furthermore, it highlights the potential of environmentally-friendly modified AM technologies to combat biofilms in clinical and non-clinical areas. Our goal with this review is to help readers gain a better understanding of fundamental concepts, inspire new researchers, and provide valuable insights for future empirical studies focused on eradicating biofilms from 3D printed materials.

The shortage of physicians in rural communities contributes to increased mortality rates among Medicare beneficiaries. This increase in mortality risk is commonly due to diseases such as heart disease and cancer, including melanoma and non-melanoma skin cancer (NMSC). Mohs micrographic surgery (MMS) is considered the gold-standard treatment for NMSC tumors, however, due to a shortage of dermatologists and Mohs surgeons in rural areas, access to MMS is limited. In these areas, image guided superficial radiation therapy (IGSRT) serves as a viable option for the treatment of NMSC lesions, with fewer recurrences and 99% cure rates, which are comparable to MMS cure rates. IGSRT is performed in dermatology clinics with support from a multidisciplinary team, including radiation therapists, medical physicists, radiation oncologists, and dermatologists. As IGSRT is able to be performed by general dermatologists, Medicare beneficiaries in rural communities will have an increase in access to treatment options and a decrease in delayed skin cancer treatment.

Here we have chosen to highlight the main natural molecules extracted from camellia sinensis, andrographis paniculata and curcuma longa that may possess antioxidant activities of interest for skin protection. The molecules involved, in the antioxidant process are respectively catechins derivatives, in particular EGCG, andrographolide and its derivatives as well as various curcuminoids. These plants are generally used as beverages for camellia sinensis (tea tree), as dietary supplements or as spices. The molecules they contain are known for their diverse therapeutic activities, including anti-inflammatory, antimicrobial, anti-cancer, antidiabetic and dermatological treatment. Their common antioxidant activities and therapeutic applications are widely documented, but their use in cosmetic is more recent. In this review, we will endeavor to compile the cosmetic uses of these natural molecules of interest, the various structural modulations reported, with the aim of improving their bioavailability as well as establishing their different mechanisms of action.

Pure monocular 3D reconstruction is an ill-posed problem that has attracted the research community's interest due to the affordability and availability of RGB sensors. SLAM, VO, and SFM are disciplines formulated to solve the 3D reconstruction problem and estimate the camera’s ego-motion, so many methods have been proposed. However, most of these methods were not evaluated in large datasets, under various motion patterns, had not been tested under the same metrics, and most of them had not been evaluated following a taxonomy, making their comparison and selection difficult. In this research, we performed a comparison of ten publicly available SLAM and VO methods following a taxonomy, including one method for each category of the primary taxonomy, three machine learning-based methods, and two updates of the best methods, to identify the advantages and limitations of each category of the taxonomy and test if the addition of machine learning or the updates made on those methods improved them significantly. Thus, we evaluated each algorithm under the TUM-Mono benchmark and performed an inferential statistical analysis to identify significative differences through its metrics. Results determined that sparse-direct methods significantly outperformed the rest of the taxonomy, and fusing them with machine learning techniques significantly improves the performance of geometric-based methods from different perspectives.

Most common classifications for acetabular bone defects are based on radiographic two-dimension imaging, with low reliability and reproducibility. With the rise of modern processing techniques based on 3D modelling, methodologies for volumetric quantification of acetabular bone loss are available. Our study aims to describe a new methodology for quantitative assess-ment of acetabular defects, based on 3D modelling, focused on the surface analysis of the integrity of the main anatomical structures of the acetabulum represented by four corresponding sectors (posterior, superior, anterior, and medial). The defect entity is measured as the Area Increase Ra-tio (AIR) detected in all the sectors analyzed on three planes of view (frontal, sagittal and axial) compared to healthy hemipelvises. The analysis was performed on 3D-models from the CT-scan of six exemplary specimens with a unilateral pathological hemipelvis. AIR between the native and the pathological hemipelvis was calculated for each sector, for a total of 48 analysis (range, +0.93% - +171.35%). AIR of >50% were found in 22/48(45.8%) sectors and affected mostly the posterior, medial and superior sectors (20/22, 90.9%). Qualitative analysis showed consistency of the data with the morphological features of the defects. Further studies with larger samples are needed to validate the methodology and potentially develop a new classification scheme.

In the last 20 years, TADs have become one of the topics in orthodontic science, as it becomes one of the effective anchorages in moving teeth in a 3D movement to treat malocclusion and dental-alveolar orthopedic. Problems with the collusion of the roots of the teeth and trauma have hindered the use of these TADs; one of the solutions to keep TADs safe is a step-by-step innovation of procedure to make this anchorage concept using TAD safe. Making surgical guides for single-standing TADs is essential, and in practice, it is virtually possible with the advance of today's CAD/CAM and 3D printers. The content subject in the paper contains two parts: the consideration of why a surgical guide is necessary for the implantation of TADs and the making of the Surgical guide itself.

An approach employing ultrafast laser hybrid subtractive-additive microfabrication combining ablation, 3D nanolithography and welding is proposed for the realization of Lab-On-Chip (LOC) device. Single amplified Yb:KGW fs-pulsed laser source is shown to be suitable for fabricating microgrooves in glass slabs, polymerization of fine-meshes filter out of hybrid organic-inorganic photopolymer SZ2080 inside them, and, lastly, sealing the whole chip with cover glass into a single monolithic piece. The created microfluidic device proved its particle sorting function by separating 1 μm and 10 μm polystyrene spheres in a mixture. All together, this shows that fs-laser microfabrication technology is a flexible and versatile tool for the manufacturing of mesoscale multi-material LOC devices.

Background: Cutaneous melanoma arises from skin melanocytes and has a high risk of metastatic spread. Despite better prevention, earlier detection, and the development of innovative therapies melanoma incidence and mortality increase annually. Major clinical risk factors for melanoma include fair skin, an increased number of nevi, the presence of dysplastic nevi, and a family history of melanoma. However, several external inducers seem to be associated with melanoma susceptibility such as environmental exposure, primarily unprotected sun experience, alcohol consumption, and heavy metals. In recent years, epidemiological studies have highlighted a potential risk of β-hexachlorocyclohexane (β-HCH), the most studied organochlorine pesticide, on cancer induction including melanoma. Methods: We evaluated in vitro the impact of this pollutant on epidermal and dermal cells, attempting to describe mechanisms that could render cutaneous cells more prone to oncogenic transformation. Results: We demonstrated that β-HCH impacts melanocyte biology with a highly cell-type specific signature that involves perturbation of AKT/mTOR and Wnt/β-catenin signaling, and AMPK activation that converges in lowering energy reserve, cell proliferation, and pigment production. Conclusion: In conclusion, long-term exposure to persistent organic pollutants damages melanocyte metabolism in the function of the melanin content with a consequent reduction of melanogenesis indicating a potential augmented skin cancer risk.

Skin cancer is a global health concern with increasing prevalence, necessitating effective early detection and classification systems. Transfer learning has emerged as a powerful tool in this domain, enhancing diagnostic accuracy. Attention mechanisms, which selectively focus on pertinent image features, play a pivotal role in transfer learning. While previous studies have highlighted their effectiveness, their applicability across different models and datasets remains understudied. This empirical study explores the impact of various attention mechanisms on the performance of transfer learning models for skin cancer detection and classification. Using five transfer learning models (DenseNet121, InceptionV3, MobileNet, VGG16, and Xception) and six attention mechanisms (Channel Attention, Global Context Attention, Guided Attention, Nonlocal Attention, Positional Attention, and Spatial Attention), we conducted 105 experiments across three datasets. Traditional metrics (accuracy, precision, recall, and f1-score) were employed for empirical validation. The results reveal a nuanced relationship between attention mechanisms, transfer learning models, and datasets. Overall, attention mechanisms exhibit the potential to enhance skin cancer classification. Spatial and channel attention mechanisms consistently outperform others, offering simplicity and effectiveness. Model-specific selection of attention mechanisms is crucial, with a trade-off between model complexity and performance evident. This study provides insights into developing efficient skin cancer classification models utilizing attention mechanisms.

Stretch marks are far from being exclusively appearing on pregnant women and appear whenever the body experience a rapid growth. Into the dermis, collagen fibres are altered associated with a loss of orientation and the elastic network is disrupted leading to a fibrotic organisation. This results to epidermal tearing which produce skin lesions. Centella asiatica is a well-known medicinal plants rich in triterpenic actives molecules and traditionally used to treat wounds and help skin repair. The aim of this study was to evaluate Centella asiatica extract as a natural way to solve stretch marks concern and understand its mechanism of action. We have first evaluated the fibroblast’s proliferation based on scratch assay model and their genes expression by RT-qPCR. At the ex vivo level, elastin fibres were quantified by immunofluorescence. Collagen fibre’s orientation and their occupation of the dermis were analysed after Sirius red staining and specific software analysis. We have proven that Centella asiatica has stimulated fibroblasts proliferation, reduced extracellular matrix degradation and fibrosis. On stretch marked skin explant, Centella asiatica increased the occupation of collagen fibres and elastin production. Based on the mechanisms behind the formation of stretch marks, Centella asiatica restores dermis network by optimising fibres organisation for a visible skin remodelling effect.