226Ra and 228Ra are typically monitored for groundwater and surface water compliance at legacy U mining and milling sites. Groundwater monitoring results for combined Ra (226Ra+228Ra) reported by the existing contract laboratory at a former U mine and mill Site (Wyoming, USA) have been highly variable and with increasing trends at the Site compliance and background wells since the method was changed in 2005. Sample reanalysis has indicated poor reproducibility and significant analytical error in 228Ra measurements. An interlaboratory comparison was conducted to evaluate the potential causes of the high variability and analytical error. Two different methods were used for 226Ra (M903.0 and M903.1) and 228Ra (M904.0 and Ra-05). 226Ra results were less variable compared to 228Ra, and 228Ra data from the existing laboratory were qualified as estimated with high bias due to detection of 228Ra in the field blank. Compliance with the 226Ra+228Ra groundwater standard was either met or not met, depending on which laboratory conducted the analyses. Specific laboratory techniques, rather than the analytical method, are contributing to elevated 228Ra values being reported. It was recommended that samples whose 226Ra+228Ra results exceed the Site standard in the future be reanalyzed by the existing laboratory with a sample split also being sent to an outside laboratory for confirmatory analysis.

Remote sensing-based models usually have difficulty in generating spatio-temporally continuous terrestrial evapotranspiration (ET) due to cloud cover and model failures. To overcome this problem, machine learning methods have been widely used to reconstruct ET. However, studies comparing and evaluating the accuracy and effectiveness of reconstruction among different machine learning methods remain scarce. In this study, four popular machine learning methods (deep forest, deep neural network, random forest, extreme gradient boosting) were used to reconstruct the ET product, addressing gaps resulting from cloud cover and model failure. The ET reconstructed by four methods were evaluated and compared in Heihe River Basin. The results showed that four methods performed well in the Heihe River Basin, but the RF method was particularly robust. It not only performed well compared with ground measurement (R = 0.73), but also reconstructed ET throughout the basin. Validation based on ground measurement showed that DNN and XGB models performed well (R > 0.70). However, few gaps still existed in the desert after reconstruction, especially for the XGB model. The DF model filled these gaps throughout the basin, but the model had lower consistency compared with ground measurement (R = 0.66) and yielded many low values. The results of this study suggested that machine learning methods had considerable potential in reconstruction of ET at regional scale.

This paper analyzes the representation behaviors of a comparison measure between two compared fuzzy sets. Three types of restrictions on two fuzzy sets are considered in this paper: the two disjoint union fuzzy sets, the two disjoint fuzzy sets and the two general fuzzy sets. Differences exist among the numbers of possible representations of a comparison measure for the three types of fuzzy sets restrictions. The value of comparison measure is constant for the two disjoint union fuzzy sets. There are 42 candidate representations of a comparison measure for the two disjoint fuzzy sets. Of which 13 candidate representations with one or two terms can be used to easily calculate and compare a comparison measure.

Pure monocular 3D reconstruction is an ill-posed problem that has attracted the research community's interest due to the affordability and availability of RGB sensors. SLAM, VO, and SFM are disciplines formulated to solve the 3D reconstruction problem and estimate the camera’s ego-motion, so many methods have been proposed. However, most of these methods were not evaluated in large datasets, under various motion patterns, had not been tested under the same metrics, and most of them had not been evaluated following a taxonomy, making their comparison and selection difficult. In this research, we performed a comparison of ten publicly available SLAM and VO methods following a taxonomy, including one method for each category of the primary taxonomy, three machine learning-based methods, and two updates of the best methods, to identify the advantages and limitations of each category of the taxonomy and test if the addition of machine learning or the updates made on those methods improved them significantly. Thus, we evaluated each algorithm under the TUM-Mono benchmark and performed an inferential statistical analysis to identify significative differences through its metrics. Results determined that sparse-direct methods significantly outperformed the rest of the taxonomy, and fusing them with machine learning techniques significantly improves the performance of geometric-based methods from different perspectives.

(1) Exoskeletons offer potential benefits for overhead working tasks, but gender effects or differences are unclear. This study aimed to compare the performance, strain, and comfort of men and women using an upper-body exoskeleton. (2) n=20 female and n=16 male participants performed an overhead drilling task with and without a passive upper-body exoskeleton in a randomized cross-over study. Task performance of different movement phases, perceived exertion, and ease of use were measured to compare gender differences. One and two-way analyses were used to com-pare genders in the different conditions. (3) Gender differences after controlling for BMI in task performance were found for error integrals (p <.001) with higher values in male participants. Moreover, there was a significant interaction effect for gender x exoskeleton use. While females showed performance decrements in aiming with exoskeleton use, the male's performance increased (p=.025). No other gender differences were observed. (4) Gender differences in task performance using an upper-body industrial exoskeleton were less detectable than expected after controlling for BMI, indicating that body composition and anthropometrics might be valuable indicators for per-formance including assisting devices. Moreover, future studies should also integrate the examina-tion of muscle activity to gain more insights into potential gender movement control patterns.

Legacy IPv4 networks are strenuous to manage and operate. Network operators are in need to minimize the capital and operational expenditure of running network infrastructure. The implementation of Software-defined networking (SDN) addresses those issues by minimizing the expenditures in the long run. Legacy networks need to integrate with the SDN networks for the smooth migration towards the fully functional SDN environment. In this paper, we compare the network performance of the legacy network with the SDN network for IP routing in order to determine the feasibility of the SDN deployment in the Internet Service provider (ISP) network. The simulation of the network is performed in the Mininet test-bed and the network traffic is generated using distributed Internet traffic generator. Open network operating system is used as a controller for the SDN network in which SDN-IP application is used for IP routing. Round trip time, bandwidth, and packet transmission rate from both SDN and legacy networks are first collected and then the comparison is done. We found that SDN-IP performs better in terms of bandwidth and latency as compared to legacy routing. The experimental analysis of interoperability between SDN and legacy networks shows that SDN implementation in production level carrier-grade ISP network is viable and progressive.

In this study, a full-scale pilot testing was performed with side-by-side operation of a conventional enhanced biological phosphorus removal (EBPR) process and a side-stream EBPR (S2EBPR) process. A comparison of the performance, activities and population dynamics of key functionally relevant populations between the two configurations were carried out. The results demonstrated that, with the same influent wastewater characteristics, S2EBPR configuration showed more effective and stable orthophosphate (PO₄-P) removal performance (up to 94% with average effluent concentration down to 0.1 mg P/L) than conventional EBPR, especially when the mixers in side-stream reactor were operated intermittently. Mass balance analysis illustrated that both denitrification and EBPR performance have been enhanced in S2EBPR configuration through diverting primary effluent to anoxic zone and producing additional carbon (~40%) via fermentation in side-stream reactor. Microbial characterization showed that there was no significant difference in the relative abundances of Ca. Accumulibacter (~5.9%) and Tetrasphaera (~16%) putative polyphosphate-accumulating organisms (PAOs) between the two configurations. However, lower relative abundance of known GAOs was observed in S2EBPR configuration (1.1%) than the conventional one (2.7%). A relatively higher PAO activity and increased degree of dependence on glycolysis pathway than TCA cycle was observed in S2EBPR configuration using P release and uptake batch test. Adequate anaerobic solid retention time (SRT) and conditions that generate continuous and slow feeding/production of volatile fatty acid (VFA) with higher composition percentage of propionate in the side-stream reactor of S2EBPR process likely provide a competitive advantage for PAOs over GAOs.

Next-generation sequencing(NGS) for HIV drug resistance(DR) testing has an increasing number of applications for detection of Low-abundance drug resistant variants(LA-DRVs) as its features of quasispecies. However there is less information on detection performance in DR detection with NGS.To determine the feasibility of NGS technology in LA-DRVs detection for HIV-1 pre-treated patients.In this study,80 pre-treated patients’ samples accepted both NGS and Sanger sequencing(SS) in HIV-1 drug resistance testing. The results show that NGS presents higher sensitivity in mutation sites discovery at 5% threshold. NGS shows a satisfactory consistency comparing with SS in both protease inhibitors(PIs) and Integrase inhibitor(INSTIs), more than 90%. But worse consistency in Nucleotide reverse transcriptase inhibitors(NRTIs), only ranging from 61.25%-87.50%. The consistency of Non-nucleotide reverse transcriptase inhibitors(NNRTIs) between NGS and SS was around 85%. NGS shows the highest sensitivity of 91.3% at 5% threshold. The application of NGS technology in HIV-1 genotype resistance detection in different populations infected with HIV needs more documents and to be confirm further.

Diatom identification and counting by light microscopy is a fundamental method in ecological and water quality investigations. Here we present a new variant of this method based on “digital virtual slides”, and compare it to the traditional, non-digitized light microscopy workflow. We analysed three replicates of six samples using two methods: 1) working directly on a light microscope (the “traditional” counting method), and 2) preparing “virtual digital slides” by high-resolution slide scanning and subsequently identifying and labelling individual valves or frustules using a web browser-based image annotation platform (the digital method). Both methods led to comparable results in terms of species richness, diatom indices and diatom community composition. Although counting by digital microscopy was slightly more time consuming, our experience points out that the digital workflow can not only improve the transparency and reusability of diatom counts but it can also increase taxonomic precision. The introduced digital workflow can also be applied for taxonomic inter-expert calibration through the web, and for producing training image sets for deep-learning-based diatom identification, making it a promising and versatile alternative or extension to traditional light microscopic diatom analyses in the future.

Purpose: To determine whether 24-hour IOP monitoring can be a predictor for glaucoma progression and to analyze the inter-eye relationship of IOP, perfusion and progression parameters. Methods: We extracted data from manually drawn IOP curves with HIOP-Reader, a software suite we developed. The relationship between measured IOPs and mean ocular perfusion pressures (MOPP) to retinal nerve fiber layer (RNFL) thickness was analyzed. We determined the ROC curves for peak IOP (Tmax), average IOP (Tavg), IOP variation (IOPvar) and historical IOP cut-off levels to detect glaucoma progression (rate of RNFL loss). Bivariate analysis was conducted to check for various inter-eye relationships. Results: 217 eyes were included. The average IOP was 14.8±3.5 mmHg, with a 24-hour variation of 5.2±2.9 mmHg. 52% of eyes with RNFL data showed disease progression. There was no significant difference in Tmax, Tavg and IOPvar between progressors and non-progressors (all p>0.05). Except for Tavg and the temporal RNFL, there was no correlation between disease progression in any quadrant, Tmax, Tavg and IOPvar. 24-hour and outpatient IOP variables had poor sensitivities and specificities in detecting disease progression. The correlation of inter-eye parameters was moderate; correlation with disease progression was weak. Conclusion: In line with our previous study, IOP data obtained during a single visit (outpatient or inpatient monitoring) make for a poor diagnostic tool, no matter the method deployed. Glaucoma progression and perfusion pressure in left and right eyes correlated weakly to moderately with each other.

This case report investigates 5 real cases which followed legal channels and were judged by Mato Grosso Court in Brazil. Audio systems served as elements of key evidence on those lawsuits. The goal here is to analyze the cases by using a methodology based on the forensic speaker verification by using the Ordinary Least Squares (OLS) algorithm and to compare results with analyses obtained on real cases. The comparative analysis is assessed for time elapsed for obtaining results, as well as results quality. In Brazil, the lawsuit duration is very important, since the Penal Code foresees prescription after a given time, and it may lead to impunity. Results show that the analysis, by using OLS, generates immediate, effective results when compared to those obtained with traditional methodologies on the studied Brazilian lawsuits.

Chitosan is a chitin-derived fiber, extracted from the shellfish shells, a by-product of fish industry, or from fungi grown in bioreactors. In oenology, it is used for the control of Brettanomyces spp., for the prevention of ferric, copper and protein casse and for clarification. The International Organisation of Vine and Wine established the exclusive utilization of fungal chitosan to avoid the eventuality of allergic reactions. This work focuses on the differences between two chitosan categories, fungal and animal chitosan, characterizing several samples in terms of chitin content and degree of deacety-lation. In addition, different acids were used to dissolve chitosans, and their effect on viscosity and on the efficacy in wine clarification were observed. Results demonstrated that, even if fungal and animal chitosans shared similar chemical properties (deacetylation degree and chitin content), they showed different viscosity depending on the acid used to dissolve them. A significant difference was discovered on their fining properties, as animal chitosans showed a faster and greater sedimentation compared to the fungal, independently from the acid used for their dissolution. This suggests that physic-chemical differences in the molecular structure occur between the two chitosan categories and that this affect significantly their technologic (oenological) properties.

Safety assessment of structures can be obtained employing limit design to overcome uncertainties concerning actual response due to inelastic constitutive behavior and more generally to non-linear structural response and loads’ random variability. The limit analysis is used for evaluating the safety of the structures directly starting from load level without any knowledge of the load history. In the paper, the lower bound calculation is proposed where a new strain-based approach is used that allowed describing the residual stress and displacement in terms of permanent strain. The strategy used the permanent strain as the effective parameters of the procedure so that it was possible to assess the ductility requirements for the complete load program developed till collapse or shakedown. The procedure is compared to experimental results obtained on aluminum beams in shakedown.

In this study, we focus on the vibration-damping devices within the renowned physical experimental apparatus—STM. Utilizing GeoGebra software and Python, we meticulously elucidate the principle by which the vibrations of the damper are damped in a magnetic field, thereby achieving the vibration-damping functionality of the entire system. This approach not only fosters a clear physical conceptualization but also ensures the acquisition of accurate and comprehensive knowledge. Furthermore, the inquiry demonstrates the process of problem clarification facilitated by the use of software tools and then we compare the power of the widlely programming language--Python and the GeoGebra.

Antigen-presenting cells (APCs) are essential for modulating immune responses, and optimizing their differentiation protocols is critical for cell-based immunotherapies. This study compares eight different protocols for differentiating APCs from C57BL/6J mice using GM-CSF and L-929 supernatant. Four groups treated with GM-CSF and four with L-929 supernatant at various concentrations, alongside a control group were evaluated. Flow cytometry was used to analyze the expression of key markers, including MHC II, CD11c, F4/80, and CD11b. Our findings show that GM-CSF resulted in superior differentiation outcomes compared to L-929 supernatant, with higher expression levels of the analyzed markers. This study underscores the importance of considering both cell yield and protein expression quality in selecting differentiation protocols. For researchers developing therapies targeting specific cell populations, these findings demonstrate how different culture conditions influences both the quantity and phenotypic characteristics of differentiated cells. Balancing efficiency and phenotypic fidelity is crucial for optimizing cell-based immunotherapy strategies. Our data provide a valuable reference for future studies and applications involving APC differentiation from bone marrow precursors, ensuring robust foundations for developing advanced immunotherapies. This comprehensive comparison of differentiation protocols offers insights essential for enhancing the effectiveness and cost-efficiency of cell-based therapies.

This review provides an overview of advancements in plant genomics, emphasizing key stages in genomics projects and addressing associated challenges. Long read sequencing enables the cost-effective sequencing of plant DNA and assembly of highly continuous genome sequences - often even separating haplophases. Incorporating external hints, such as cDNA sequences from RNA-seq or full length cDNA sequencing, enhances the identification of gene models. While these steps enable high-throughput exploration of numerous plant genomes, a significant bottleneck lies in elucidating gene functions. The classical approach based on wet lab methods is impractical when dealing with thousands of genes in a new genome sequence. To overcome this challenge, computational tools harnessing existing information for cross species knowledge transfer are essential for expediting the functional annotation process. In support of researchers entering the field of plant genomics, a collection of recommended tools has been curated and is accessible at https://github.com/bpucker/ToolOverview.

The purpose of this study is to ​​explore the use of a custom Transformer model in brain-computer interfaces (BCIs) that translate the neural activity present when an individual with limited verbal and fine-motor skills attempts to handwrite. As found in previous studies, Transformers have performed better than recurrent neural networks (RNNs) in translation tasks which are similar to its usage here in decoding neural signals into intended handwritten text. Due to the known benefits of a Transformer, the hypothesis was that the Transformer would show promise in the context of a BCI through the recorded metrics. The neural signals of a tetraplegic individual, when they attempted to handwrite, were provided by existing research. Four trials were conducted using data with or without augmentation which the model used when training to separately minimize training loss and validation loss. When comparing the results of a BCI with the implementation of a Transformer model with the original RNN BCI (the original data source), the Transformer model performed less favorably across all four trials. Although the results do not indicate that the Transformer model currently outperforms an RNN BCI, it is important to note that further testing of the model's capabilities (such as training it with a larger and more preferable dataset and/or for longer, comparing training times between the RNN and Transformer, and/or seeing how the Transformer is improved with an offline autocorrect feature) is necessary before determining whether Transformers can enhance communication in this manner.

Social networks are experiencing great popularity, with Instagram currently being the most intensively used network. On these platforms, users are continuously exposed to self-relevant information that fosters social comparisons. A distinction is made between ability-based and opinion-based comparison dimensions. To experimentally investigate the influence of these comparison dimensions on users' subjective well-being, an online exposition experiment (N = 409) was conducted. In a preliminary study (N = 107), adequate exposition stimulus material was selected in advance. The results of the main study indicated that exposition of ability-related social comparisons in the context of social media elicited lower well-being than exposition of opinion-related social comparisons. Theoretical and practical implications of the findings were discussed and suggestions for future work were outlined.

This study introduces and demonstrates a comprehensive, accurate, unbiased approach to robust quantitative comparison of Electronic Nicotine Delivery Systems (ENDS) appropriate for establishing substantial equivalence (or lack thereof) between tobacco products. The approach is demonstrated across a family of thirteen pen- and pod-style ENDS products. Methods employed consist of formulating a robust emissions surface regression model, quantifying the empirical accuracy of the model as applied to each product, evaluating relationships between product design characteristics and maximum emissions characteristics, and presenting results in formats useful to researchers, regulators, and consumers. Results provide a response surface to characterize emissions (total particulate matter and constituents thereof) from each ENDS appropriate for use in a computer model and for conducting quantitative exposure comparisons between products. Results demonstrate that emissions vary as a function of puff duration, flow rate, E-Liquid composition, and device operating power. Further, results indicate that regulating design characteristics of ENDS devices and consumables may not achieve desired public health outcomes; it is more effective to regulate maximum permissible emissions directly. Three emissions outcome measures (yield per puff, mass concentration and constituent mass ratio) are recommended for adoption as standard quantities for reporting by manufacturers and research laboratories. The approach provides a means of (a) quantifying and comparing maximal emissions from ENDS products spanning their entire operating envelope, (b) comparative evaluation of ENDS devices and consumable design characteristics, and (c) establishing comparative equivalence of maximal emissions from ENDS. A consumer-oriented product emissions dashboard is proposed for comparative evaluation of ENDS exposure potential. Maximum achievable power dissipated in the coil of ENDS is identified as a potentially effective regulatory parameter.

This paper presents preliminary operational performance results of a pilot grid-connected photovoltaic (PV) system designed and installed on the rooftop of the Ministry of Petroleum, Energy and Mining headquarter in Nouakchott (latitude of 18.1°N and the longitude of 16.0°W), Mauritania. The aim is for the government to demonstrate the relevance of using solar energy and to encourage the uptake of solar PV technology for commercial and residential building applications in Mauritania.. In this study, the grid-connected PV system has a peak power of 48 kW and the performance monitoring was carried out during one year, with a system that allow to measure DC power, inverter and system conversion efficiency, energy generated by the PV arrays, solar radiation in the inclination plane of panels, ambient temperature and module temperature. During this period, the PV plant was found to supply 65,668 kWh to the grid. The final yield ranged from 3.91 to 5.09 kWh/kWp/day. The performance ratio was found to vary from 69.69% to 89.35% and the annual capacity factor was found to be 19%. Finally, performance parameters were compared with other PV plants installed in the same region of Northern Africa. The outcome of this work is deemed important in assisting accurate PV system design and decision-making.

In this preprint, we introduce a dataset containing students enrolment applications combined with the related result of their filing procedure. The dataset contains 73 variable. Student candidates, at the time of applying for study, fill a web form for filing the procedure. A committee at Tilburg University review each single application and decide if the student is admissible or not. This dataset is suitable for algorithmic studies and has been used in a comparison between the Naïve Bayes and the C5.0 Decision Tree Algorithms. They have been used for predicting the decision of the committee in admitting candidates at various bachelor programs. Our analysis shows that, in this particular case, a combination of the approaches outperform a both of them in term of precision and recall.

Sequence alignment and comparison through pairwise, multiple, global and local techniques are the main principles that underpin comparative genomics. However, most of the algorithms used are alignment-based which imposed some limitations on their use and application. In an attempt to provide an alignment-free alternative approaches, a methodology of comparative optinalysis and statistical mirroring was used and adopted to provide a suitable alternative for multiple genomic sequence comparison. In this article, methods comparison with MUSCLE, MUFFT, Clustal Omega, and T-Coffee was designed to assess the suitability and statistical power of statistical mirroring as an alternative method for multiple genomic sequences comparison using different sets of logically generated biological sequence datasets with different problems and computational complications. The results of the comparisons validate that statistical mirroring is a suitable alignment-free alternative approach for multiple genomic sequence comparison. The applied method (statistical mirroring) distinguishes itself over MUSCLE, MUFFT, Clustal Omega, and T-Coffee in specificity to a position-specific changes, specificity to a base-specific changes, cladogram and phylogenetic linearity, alignment independency, computational simplicity, and limit of input capacity.

A scientific consensus is emerging on the benefits of dc distribution in medium voltage power systems of ships and cities. At least 50% space savings and increased power transfer capacity are estimated with enhanced voltage dc operation of electric cables. The goal of this research is to contribute to developing the empirical knowledge on the insulation performance in order to validate the feasibility of such anticipated gains of dc versus ac, and to determine the comparative impact of different operational conditions from a component engineering point of view. The partial discharge (PD) activity in cables is measured under ac and dc conditions as an indicator of insulation performance. Specifically, PDs in defects at the semicon-insulation interface are studied in terms of inception voltage, repetition rate and discharge magnitude. Empirical understanding is drawn for operating voltage and frequency dependence of the discharge behavior in such voids in the range of 10 to 20\,kV and 0 to 0.1\,Hz, respectively. The change in PD activity with void evolution is explored.

Objectives: We compared housing and the eating habits of Roma. Contemporary findings (2013) were compared with those from the first monothematic work on Roma (1775) depicting their housing and eating habits. Methods: Data come from a journal (1775) and from semi-structured interviews (2013) with more than 70 Roma women and men who live segregated in excluded settlements at the edges of villages or scattered among the majority. Data were collected in two villages and one district town in the Tatra region, where data from the 1775 measurements originate. We used classical sociological theory and new ethnography to interpret the obtained data. Results: The main findings showed differences between specific social classes then and now regarding housing as well as eating habits, related to both conditions among Roma in the Tatra. The national Roma foods gója or marikľa are traditional foods of Slovak ancestors living in poverty in the country. The houses of Roma do not greatly differ from those of the majority. Conclusions: We conclude that life strategies of the citizens of poor settlements now are similar to two centuries ago, typical for the culture of poverty in various countries of the world even after the centuries.

Fungi play an increasingly important role in the biological control of insect pests. Aspergillus oryzae XJ1 is highly virulent to locusts, which are a destructive economic pest worldwide. Because of its host association with locusts, which is unique in Aspergillus, in this study we examined the genetic relationships of A. oryzae XJ1 within Aspergillus. We sequenced the genome of A. oryzae XJ1 and compared it with the genomes of other Aspergillus species. The complete genome of A. oryzae XJ1 is 37.9 Mb, comprising 11,720 putative genes, assembled into eight chromosomes. The genome size is similar to that of other A. oryzae strains. Phylogenomic analysis indicated that A. oryzae XJ1 was most closely related to A. flavus. Core/pan-genome analysis of A. oryzae XJ1 and other Aspergillus species revealed that A. oryzae XJ1 had 704 strain-specific genes, whereas A. flavus NRRL 3357, A. oryzae KDG 21, and A. parasiticus NRRL 2999 had 646, 955, and 779 unique genes, respectively. These results indicate that A. oryzae XJ1 is genetically distinct at the genome level from other Aspergillus species, including A. oryzae and A. flavus, and its recognition as a distinct species is supported.

This study analyzed methodologies for identifying β-casein genotypes in dairy cows and the purity of A2 fermented milk. The research was justified by the need for quick and accurate techniques for herd screening and A2 milk quality control. The methodology included the development of an ELISA test to detect β-casein A1 in fermented milk and the evaluation of a commercial Lateral Flow Immuno Assay (LFIA) to identify A2A2 genotypes and the purity of A2 milk. The results showed that the ELISA test had high sensitivity and specificity (100%) in detecting β-casein A1. The LFIA test was 100% effective in identifying A2A2 genotypes and verifying the purity of A2 milk with a minimum detectable contamination of 5% for raw milk and 10% for fermented milk. Compared to traditional genotyping, these methods proved to be highly reliable and more practical for large-scale screening. It was concluded that the ELISA and LFIA were valuable tools for ensuring the quality and authenticity of A2 milk, meeting the demands of producers and consumers for safe and healthy dairy products.

Security in the Internet of Things (IoT) is a critical concern due to the growing number of connected devices and the limited resources to implement robust security mechanisms in most of them. Adopting standard assessment frameworks, such as CVSS (Common Vulnerability Score System), allows for systematic vulnerability assessment. At the same time, CVE (Common Vulnerabilities and Exposures) records provide unique identifiers for known security issues, making it easier to share information. However, comparing security solutions is still challenging due to the diverse nature of IoT devices and the ever-evolving threat landscape, requiring continual innovation and collaboration between stakeholders. Furthermore, there still needs to be a simple way to compare technologies and solutions, taking into account the security provided by them. In this sense, in this article, we propose a tool for calculating a security score based on the CVSS index of each existing vulnerability in a given technology. We explain how the tool performs the calculation, discuss some challenges, and propose improvements for future work.

This study investigates the nonlinearities in three-phase inverters for SiC-based systems and compares their performance to IGBT-based systems. An analytical model of inverter voltage distortion is developed, which accounts not only for dead time (td), switching delay time, switching frequency (fs), and voltage drops of power devices, but also for output parasitic capacitance (Cout). Experimental tests validate the model, which provides a more accurate estimate of the inverter’s output phase voltage distortion. The power device characteristics are obtained from datasheets, while Cout is determined through experimentation. Three-phase inverters with varying switching frequencies, fundamental frequencies, and dead-time values are used in simulations and experiments to determine the influence of nonlinearity on phase voltage deviation and current distortion. The results show that, due to SiC devices’ faster switching time, the phase voltage deviation and phase current distortion are lower in SiC-based inverters than in IGBT-based ones for high-frequency applications, as the dead time can be reduced.

The monitoring of lake waterbody area in the Qinghai Tibet Plateau (QTP) is of great significance to deal with global climate change. As the latest generation of Landsat series satellites, Landsat-9 data not only have higher radiometric resolution, but also cooperate with other Landsat satellites to greatly improve the temporal resolution. It has great application potential in lake waterbody area monitoring. In order to explore the performance of different algorithms for extracting waterbody and lake waterbody area in Landsat-9 data under large-scale QTP regions, this study relies on Google Earth Engine (GEE) platform and selects 10 waterbody extraction algorithms as the basis to realize the quantitative evaluation of QTP lake waterbody area extraction results. The results show that the Random Forest (RF) algorithm performs best in all models. The overall accuracy of waterbody extraction is 95.84%, and the average error of lake waterbody area extraction is 1.505%. Among the traditional threshold segmentation waterbody extraction algorithms, the overall accuracy of the NDWI waterbody extraction method is 89.89%, and the average error of lake waterbody area extraction is 3.501%, which is the highest performance model in this kind of algorithms. This study proves that Landsat-9 data can effectively classify QTP waterbodies. With the development of cloud computing technologies such as Gee, more complex models such as RF can be selected to improve the extraction accuracy of water body and Lake area in large-scale research.

The rapid industrial growth in solar energy is gaining increasing interest in renewable power from smart grids and plants. Anomaly detection in photovoltaic (PV) systems is a demanding task. In this sense, it is vital to utilize recent advances in machine learning to accurately and timely detect different anomalies and condition monitoring. This paper addresses this issue by evaluating different machine learning techniques and schemes and showing how to apply these approaches to solve anomaly detection and detect faults on photovoltaic components. For this, we apply distinct state-of-the-art machine learning techniques (AutoEncoder Long Short-Term Memory (AE-LSTM), Facebook-Prophet, and Isolation Forest) to detect faults/anomalies and evaluate their performance. These models shall identify the PV system's healthy and abnormal actual behaviors. Our results provide clear insights to make an informed decision, especially with experimental trade-offs for such complex solution space.

Expansion tube is ideal energy absorber which dissipates kinetic energy through plastic deformation and friction. There is an urgent need to understand the influence of key parameter, e.g. semi angle, tube material, and friction coefficient, on the mechanical response and energy absorption characteristics of expansion tube. In the present work, the material properties of the tubes were tested under quasi-static loading condition, and the numerical simulations were carried out by using commercial software ABAQUS. Based on the validated finite element simulation, all the semi angle, tube material, and friction have significant effects on the energy absorption capacity of expansion tube. The expansion tube with high tensile stress of parent material have high energy absorption capacity, while the specific energy absorption is linear with the tensile stress/density of tube material. This work would give a guidance to the structural design and parent materials selection for expansion tubes.

The main purpose of this study is the determination of the optimal data acquisition and processing parameters of electric and seismic tomographic techniques, for the investigation of complex geological environments. Two different study areas, in central-east Peloponnese and SW Attica were selected, where a detailed geological mapping and surface geophysical survey were carried out. The applied geophysical survey included the application of electrical resistivity tomography (ERT) and seismic refraction tomography (SRT). The geoelectrical measurements were acquired with different arrays and electrode configurations. Moreover, various types of seismic sources were used at seventeen shot locations along the seismic arrays. For the processing of geoelectrical data, clustered datasets were created increasing the depth of investigation and the discriminatory capability. The seismic data processing included: (a) creation of synthetic models and seismic records to determine the effectiveness and capabilities of the technique, (b) spectral analysis of the seismic records to determine the optimal seismic source type and (c) inversion of the field data to create representative subsurface velocity models. The results of the two techniques successfully delineated the complex subsurface structure that characterizes these two geological environments. The application of the ERT combined with the SRT, are the two dominant, high-resolution techniques for the elucidation of complex subsurface structures.

This study examined the efficiency of a combined diagnostic approach in which bioamplification of Arizona 861 S1 citron was integrated with RT‒PCR to detect Citrus tristeza virus (CTV) and Hop Stunt Viroid (HSVd) in Citrus plants. The capacity of the combined method to diagnose mixed infections of CTV and HSVd, along with early single infections of both pathogens, was assessed by evaluating the incubation periods and differential detection capabilities between the combined and direct methods. The bioamplification method exhibited high sensitivity (100%) and specificity (100%) for CTV, enabling early detection even in patients with low-titer infections compared to direct RT‒PCR. However, for HSVd, the combined method achieved 50% sensitivity in early infections, highlighting the need for additional replicates to enhance diagnostic reliability. The relative concentrations of pathogens in mixed and simple infections were evaluated; the analysis revealed no significant differences, suggesting minimal interference between CTV and HSVd. This approach allows early detection of CTV but requires further refinement for HSVd diagnosis. These findings underscore the complementary roles of the cost-effectiveness of direct RT‒PCR and the sensitivity of the combined method in implementing effective disease control strategies in citrus crops.

The environment is seldom optimal for plant growth and changes in abiotic and biotic signals, including temperature, water availability, radiation and pests, induce plant responses to optimise survival. The New Zealand native plant species and close relative to Arabidopsis thaliana, Pachycladon cheesemanii grows under environmental conditions that are unsustainable for many plant species. Here we compare the responses of both plant species to different stressors (low temperature, salt and UV-B radiation) to help understand how P. cheesemanii can grow in such harsh environments. The stress transcriptomes were then determined and comparative transcriptome and network analyses discovered similar and unique responses within species between different stresses, and between the two plant species. A number of widely studied plant stress processes were highly conserved in A. thaliana and P. cheesemanii. However, in response to cold stress, Gene Ontology terms related to glycosinolate metabolism were only enriched in P. cheesemanii. Salt stress was associated with alteration of the cuticle and proline biosynthesis in A. thaliana and P. cheesemanii, respectively. Anthocyanin production may be a strategy to cope with UV-B radiation stress in P. cheesemanii only. These results allowed us to construct broad stress response pathways in A. thaliana and P. cheesemanii and identify possible novel plant strategies that help mitigate environmental stress.

The importance of statistics in biological research is inevitable. The appliance of statistics is the most powerful tool to support the scientific hypothesis and to give credibility to biological research methodology, to interpret convoluted explanations and conclusions based on the research findings. The evidences from literatures point the persistent statistical errors, selection of non-proper statistical test with the consequence of misinterpretation of the scientific results which are published in international journals. One of the most extensively used statistical tests in the field of biology (preclinical and clinical) is analysis of variance (ANOVA). ANOVA test is in place of multiple T-tests to compare the means of more than two groups at a time; and there are some important points which biologists should be aware of them to avoid possible misinterpretation of results with the consequence of wrong conclusion. Accordingly, the aim of the current review is to help biologists to understand the basic concepts of ANOVA test and reach to a more valid interpretation of achieved results.

For the task planning problem of the command and control architecture, the existing algorithms have problems such as low efficiency and poor re-planning quality under abnormal conditions. Based on the requirements of the current accusation architecture, this paper constructs a distributed command and control architecture model based on multi-agents, which makes use of the superiority of multi-agents in dealing with complex tasks. The concept of MultiAgents-HTN is proposed under the framework. The original hierarchical task network planning algorithm is optimized, the multi-agent collaboration framework is redefined, and the coordination mechanism of local conflict is designed. Taking the classical resource scheduling problem as the experimental background, the comparison between the proposed algorithm and the classical HTN algorithm is carried out. The experimental results show that the proposed algorithm has higher quality and higher efficiency than the existing algorithm, and the space anomaly is heavy during processing. The planning is more efficient, and the time is more complicated and superior in dealing with the same problem, with good convergence and adaptability. The conclusion proves that the distributed command and control architecture proposed in this paper has high practicability in related fields and can solve the problem of distributed command and control architecture in multi-agent environment.

Digital Terrain Models (DTMs) are currently a fundamental source of information in Earth Sciences. However, DTM-based studies can contain remarkable biases if limitations and inaccuracies of these models are disregarded. In this work, four freely available datasets such as SRTM C-SAR DEM, ASTER GDEM V2 and two airborne LiDAR derived DTMs (at 5 and 1 m spatial resolution, respectively) were analysed in a comparative study in three geomorphologically contrasted catchments located in Mediterranean geoecosystems under intensive human land use influence. Vertical accuracy as well as the influence of each dataset characteristics on hydrological and geomorphological modelling applicability were assessed by using classic geometric and morphometric parameters and the more recently proposed index of sediment connectivity. Overall vertical accuracy – expressed as Root Mean Squared Error (RMSE) and Normalized Median Deviation (NMAD) – revealed the highest accuracy in the cases of the 1 m (RMSE = 1.55 m; NMAD = 0.44 m) and 5 m LiDAR DTMs (RMSE = 1.73 m; NMAD = 0.84 m). Vertical accuracy of SRTM was lower (RMSE = 6.98 m; NMAD = 5.27 m) but considerably higher than in the case of ASTER (RMSE = 16.10 m; NMAD = 11.23 m). All datasets were affected by systematic distortions. As a consequence, propagation of these errors caused negative impacts on flow routing, stream network and catchment delineation and, to a lower extent, on the distribution of slope values. These limitations should be carefully considered when applying DTMs for hydrogeomorphological modelling.

In the digital age, 3D as-built monitoring of structures and buildings is becoming increasingly important. It provides the basis for automated quality control and progress monitoring through as-built and as-planned model- comparisons, as well as 3D modelling for automated repair, refurbishment and reuse in existing construction. Especially for 3D model-based manufacturing processes such as additive manufacturing, efficient as-built monitoring is essen- tial to ensure the quality and accuracy of buildings and products. Therefore, three different 3D scanning devices have been evaluated for 3D as- built monitoring of concrete structures with different characteristics: An indus- trial handheld laser scanner commonly used in automotive and mechanical en- gineering, a mobile device with lidar for commercial public use, and a terrestri- al laser scanner commonly used for surveying. The devices were tested on 3D printed, cast, and assembled structures of different sizes and geometries. The scan results are compared to the as-planned models based on their dimen- sional distances using Cloud-to-Cloud Comparison (C2C). The results show that the applicability is highly dependent on the size, geometric complexity and surface texture of the concrete structures. While small and flat structures can be captured completely and with micrometer accuracy using the handheld industri- al laser scanner, terrestrial laser scanners are suitable for capturing large struc- tures and environments. The handheld, photogrammetry-based mobile device has demonstrated the broadest applicability for concrete structures. The accura- cy and coverage of the point cloud results were respectively high. Therefore, photogrammetry-based scanning with advanced mobile devices is a cost- effective, fast and portable alternative for 3D as-built monitoring and data ac- quisition of a wide range of concrete structures.

Background: Patients with locally advanced/metastatic urothelial cancer have been conventionally treated with platinum-based chemotherapy. Recently, numerous new treatments have been proposed to improve overall survival (OS) and reduce adverse effects, but no head-to-head direct comparison is available. Methods: We considered: a) monotherapy with immune checkpoint inhibitors (ICI); b) combinations of an ICI with chemotherapy; c) combinations of an ICI with other drugs. An indirect comparison was performed to identify the regimens most effective in prolonging OS compared to each other and to chemotherapy. Results: A total of 6 articles were included. In our final analysis, nivolumab plus chemotherapy showed better OS compared to chemotherapy (HR= 0.70, 95%CI: .59-0.82); while durvalumab plus tremelimumab showed no OS benefit (HR=0.95, 95%CI 0.82-1.11). More interestingly, enfortumab vedotin plus pembrolizumab significantly prolonged OS compared to both chemotherapy alone (HR=0.53, 95%CI 0.45-0.63) and nivolumab plus chemotherapy (HR= 0.76, 95%CI 0.60-0.97). Discussion and conclusion: Among new treatments for locally advanced and metastatic urothelial cancer, enfortumab vedotin + pembrolizumab showed the best efficacy in terms of OS. Our results support the use of this combination as first-line treatment in this setting.

Background: The development and application of machine learning (ML) methods became so fast that almost nobody can follow their developments in every detail. There is no wonder that numerous errors and inconsistencies in their usage have also spread with a similar speed independently from the tasks: regression and classification.. This work summarizes frequent errors committed by certain authors with the aims of helping scientists to avoid them. Methods: The principle of parsimony governs the train of thought. Fair method comparison methods can be completed with multicriteria decision making techniques, preferably sum of ranking differences (SRD). Its coupling with analysis of variance (ANOVA) decomposes the effect of several factors. Earlier findings are summarized in a review-like manner: the abuse of the correlation coefficient and proper practices for model discrimination are also outlined. Results: Using an illustrative example, the correct practice and the methodology is summarized as guidelines for model discrimination, and for minimizing the prediction errors. The following factors are all prerequisites for successful modeling: proper data preprocessing, statistical tests, suitable performance parameters, appropriate degrees of freedom, fair comparison of models, outlier detection, just to name a few. A checklist is provided on how to present ML modeling properly. The advocated practices are reviewed in the discussion. Conclusions: Many of the errors can easily be filtered out with careful reviewing. The authors’ responsibility is to adhere to the rules of modeling and validation.

The diffusion of New Ways of Working (NWW) is an important trend in contemporary organi-zations. Many related empirical studies have been produced, but none have focused on differences in employees’ perceptions of the opportunity to use NWW according to organization sector (pri-vate, semi-public, public). This study, based on neoinstituionalism and HR attributions theory, investigated these differences via a survey (n=2693) of employees at private (n=358), semi-public (n=204), and public (n=2131) organizations. The results show that public employees reported less opportunity to use NWW than their private and semi-public counterparts. Furthermore, private sector employees were more likely to attribute well-being and productivity benefits to NWW than their public sector and semi-public counterparts. We also show that institutional and organiza-tional variables specific to the characteristics of organizations in the three sectors partially ex-plain the degree of perceptions with respect to the opportunity to use NWW.

The calculation of the collapse load of spherical domes is addressed using a semi-analytical approach under the hypotheses of small displacements and perfect plasticity. The procedure is based on the numerical approximation of the self-stress that represents the projection of the balance equilibrium null space on a finite dimensional manifold. The so obtained self-equilibrated stress span is superimposed to a finite element linear elastic solution to the prescribed loads yielding to the statically admissible set accordingly to Melan’s theorem. The compatibility of the stress with the constitutive law of the material has been enforced using linearized limit domain in terms of generalized stress, namely axial force and bending moment along the local spherical curvilinear coordinates. The procedure has been tested with reference to numerical and experimental data from the literature confirming the accuracy of the proposed method. The comparison with the literature confirms that the buckling load is much greater than the plastic collapse loads both calculated through the proposed procedure and reported in the quoted literature.

Indian cities are increasingly becoming susceptible to PM10 induced health effects which have become a matter of concern for the policymakers of the country. Air pollution is engulfing the comparatively smaller cities as the rapid pace of urbanization, and economic development seems not to lose steam ever. A review of air pollution of 28 cities of India, which includes tier-I, II, and III cities of India, found to have grossly violated both WHO and NAAQS standards in respect of acceptable daily average PM10 concentrations by a wide margin. Predicting the city level PM10 concentrations in advance and accordingly initiate prior actions is an acceptable solution to save the city dwellers from PM10 induced health hazards. Predictive ability of three models, linear MLR, nonlinear MLP (ANN), and nonlinear CART, for one day ahead PM10 concentration forecasting of tier-II Guwahati city, were tested with 2016-2018 daily average observed climate data, PM10, and gaseous pollutants. The results show that the non-linear algorithm MLP with feedforward backpropagation network topologies of ANN class, giving the best prediction value when compared with linear MLR and nonlinear CART model. ANN (MLP) approach, therefore, may be useful to effectively derive a predictive understanding of one day ahead PM10 concentration level and thus provide a tool to the policymakers for improving decision-making associated with air pollution and public health.

The role of the immune response to SARS-CoV-2 infection is not yet well known, in particular about the persistence of circulating antibodies. The aim of the study is to compare the results of two automated systems for the determination of IgG antibodies against SARS CoV-2 and to assess the time course of the IgG response after the onset of symptoms for a period longer than that evaluated to date. IgG were measured in 98 specimens of 55 subjects with COVID-19 (time from the onset of symptoms from 3 to 109 days) using the automated tests "Abbott SARS-COV-2 IgG" and the "MAGLUMI 2019-nCoV IgG". The two methods had a concordance of 91.8%, but the quantitative correlation showed very dispersed results. All the specimens resulted positive after 17 days from the onset of the synptoms. However, the median concentrations of IgG, after a rapid increase up to about 20 days, quickly decrease to about 15% of the maximum for Maglumi. The same samples measured by Architect showed a quite constant trend up to 80 day, and then an only moderate decline. The titer of IgG against SARS-CoV-2 in patients exposed to COVID-19 may significantly and rapidly decrease, with a different time-course depending on the method used for the determination.

A coupled stratospheric chemistry-meteorology model was developed by combining the Canadian operational weather prediction model Global Environmental Multiscale (GEM) with a comprehensive stratospheric photochemistry model from the Belgian Assimilation System for Chemical ObsErvations (BASCOE). The coupled model was called GEM-BACH for GEM-Belgian Atmospheric CHemistry. The coupling was made across a chemical interface that preserves time splitting while being modular, allowing GEM to run with or without chemistry. An evaluation of the coupling was performed by comparing the coupled model, refreshed by meteorological analyses every 6 hours, against the standard offline chemical transport model (CTM) approach. Results show that the dynamical meteorological consistency between meteorological analysis times far outweighs the error created by the jump resulting from the meteorological analysis increments at regular time intervals, irrespective whether a 3D-Var or 4D-Var meteorological analysis is used. GEM-BACH forecast refreshed by meteorological analyses every 6 hours were compared against independent measurements of temperature, long-lived species, ozone and water vapor. The comparison showed a relatively good agreement throughout the stratosphere except for an upper-level warm temperature bias and an ozone deficit of nearly 15%. Arguments in favor of using the same horizontal resolution for chemistry, meteorology, and meteorological analysis increments are also presented. In particular, the coupled model simulation during an ozone hole event gives better ozone concentrations than a 4D-Var chemical assimilation at a lower resolution.

This paper aims at providing a multisource data analysis, including direct data collection, focussed on daily average distances covered with motorised mobility. Its results can be used as a basis for policies involving a shift towards new propulsions, electric motors or hybrid electric vehicles (HEV) for road vehicles. A number of variables influence the propensity of drivers to acquire or use electric traction, even the option of plug-in hybrid electric vehicles (PHEV). This paper addresses one of such variable: the compliancy of electric traction regarding both hybrid plug-in solutions and full-electric vehicles, in addition to the autonomy of batteries (range), with the daily travels by road vehicles, mainly by automobiles. We want to understand whether the constraints leading towards a greater independence from crude oil rather than constraints concerning emissions, mainly in urban contexts, might be compliant with the habitual daily trips of drivers. We also want to understand if these daily trips have varied much during recent years and the consequences they may have on operational costs of plug-in automobiles. We are well aware that the average distances do not represent the actual daily runs of vehicles; yet similar distributions of daily distances for different case studies indicate that a high percentage of trips respond to certain features. After introducing a general overview of road-motorised mobility in Italy, the paper compares data from other studies to provide an indication of average daily driving distances. This reveals how different recent analyses converge on a limited range of average road distances covered daily by Italians, which is compliant with ranges allowed by electric batteries, provided that their low energy density in comparison with that of oil-derived fuels do not imply a significant increase in vehicle mass. Subsequently, average distances in some EU Countries are taken from the literature, and the results are also compared with U.S. data. The study extends the analysis of trends on the use of automobiles and road-vehicles to the international context by also addressing average daily distances covered for freight transport in some EU Countries, thereby providing a further basis for comparison and for understanding whether the daily motorised mobility can be considered as a stable phenomenon. Finally, an analysis is provided of the economic operational advantages from using plug-in vehicles. The main aim of this paper is thereafter to investigate the average daily motorised mobility of single vehicles – so not an aggregated motorised mobility as collected by some statistics – by using private motorised vehicles in Italy, with related trends; thereafter, to compare these data with those obtained from other countries, making use of both existing research studies and directly collected data; the final aim is to understand both the compliance of daily activities based on the use of automobiles with the autonomy of batteries (range) and to calculate some economic outcomes.

Low-cost RGB-D cameras are increasingly used in several research fields including human-machine interaction, safety, robotics, biomedical engineering and even Reverse Engineering applications. Among the plethora of commercial devices, the Intel RealSense cameras proved to be among the best suitable devices, providing a good compromise between cost, ease of use, compactness and precision. Released on the market in January 2018, the new Intel model RealSense D415 has a wide acquisition range (i.e. ~160-10000 mm) and a narrow field of view to capture objects in rapid motion. Given the unexplored potential of this new device, especially when used as a 3D scanner, the present work aims to characterize and to provide metrological considerations on the RealSense D415. In particular, tests are carried out to assess the device performances in the near range (i.e. 100-1000 mm). Characterization is performed by integrating the guidelines of the existing standard (i.e. the German VDI/VDE 2634 part 2 normative) with a number of literature-based strategies. Performance analysis is finally compared against latest close-range sensors, thus providing a useful guidance for researchers and practitioners aiming to use RGB-D cameras in Reverse Engineering applications.

Genetic testing has expanded out of the research laboratory into medical practice and the direct-to-consumer market, and rapid analysis of the resulting genotype data can now have significant impact. We present a method for summarizing personal genotypes as ‘genotype fingerprints’ that meet these needs. Genotype fingerprints can be derived from any single nucleotide polymorphism (SNP)-based assay, and remain comparable as chip designs evolve to higher marker densities. We demonstrate that they support distinguishing types of relationships among closely related individuals and closely related individuals from individuals from the same background population, as well as high-throughput identification of identical genotypes, individuals in known background populations, and de novo separation of subpopulations within a large cohort through extremely rapid comparisons. While fingerprints do not preserve anonymity, they provide a useful degree of privacy by summarizing a genotype in a way that prevents reconstruction of individual marker states. Genotype fingerprints are therefore well-suited as a format for public aggregation of genetic information to support ancestry and relatedness determination without revealing personal health risk status.

While current video quality assessment research predominantly revolves around resolutions of 4K and beyond, targeted at Ultra High-Definition (UHD) displays, effective video quality for mobile video streaming remains primarily within the range of 480p to 1080p. In this study, we conducted a comparative analysis of the Quality of Experience (QoE) for widely implemented video codecs on mobile devices, specifically Advanced Video Coding (AVC), its successor High-Efficiency Video Coding (HEVC), and Google's VP9. Our choice of 720p video sequences from a newly developed database, all with identical bitrates, aimed to maintain a manageable subjective assessment duration, capped at 35-40 minutes. To mimic real-time network conditions, we generated stimuli by streaming original video clips over a controlled emulated setup, subjecting them to eight different packet loss scenarios. We evaluated the quality and structural similarity of the distorted video clips using objective metrics, including Video Quality Metric (VQM), Peak Signal-to-Noise Ratio (PSNR), Video Multi-Method Assessment Fusion (VMAF), and Multi-Scale Structural Similarity Index (MS-SSIM). Subsequently, we collected subjective ratings through a custom mobile application developed for Android devices. Our findings revealed that VMAF accurately represents the degradation in video quality compared to other metrics. Moreover, in most cases, HEVC exhibits an advantage over both AVC and VP9 under low packet loss scenarios. However, it is noteworthy that in our test cases, AVC outperformed HEVC and VP9 in scenarios with high packet loss, based on both subjective and objective assessments. Our observations further indicate that user preferences for the presented content contribute to video quality ratings, emphasizing the importance of additional factors that influence the perceived video quality of end-users.

Background: The proven efficacy of mTOR inhibitors (mTORI), tyrosine kinase inhibitors (TKI) or immune checkpoint inhibitors (ICI) therapies in metastatic renal cell carcinoma (RCC), suggested that these agents should be investigated as adjuvant therapy with the aim of eliminating any residual undetectable microscopic disease after curative resection. Our study aimed to compare the efficacy of these treatments through the application of an innovative method that reconstructs individual patient data. Methods: Nine phase III studies describing different treatment options for adjuvant RCC were selected. Individual patient data were reconstructed from Kaplan–Meier (KM) curves through the “IPDfromKM method”. Disease-free survival (DFS) were compared among combination treatments and control arm (placebo). Results were summarized as multi-treatment KM curves. Standard statistical testing was used, including hazard ratio and likelihood ratio tests for heterogeneity. Results: In the overall population, this study showed that two ICIs (pembrolizumab and nivolumab plus ipilimumab) and one TKI (sunitinib) showed superiority over placebo, whereas both TKI and mTORI did not. As we assessed DFS as the primary endpoint for the adjuvant comparison, the overall survival benefit remains unknown.. Conclusion: This novel approach to investigating survival has allowed us to conduct all of the indirect head-to-head comparisons between these agents in a context where no "real" comparative trials have been conducted.

Babesia species infect a very wide range of mammal hosts across the globe and zoonotic infections are of growing concern. Several species of the Babesia genus infect dogs and some of these cause significant morbidity and mortality. The Apicomplexan parasite resides within the red cell and infections result in direct damage to the host through intra- and extravascular hemolysis. An exuberant inflammatory response by the host to some species of Babesia parasites also result in significant collateral damage to the host. Canine infections have been the subject of much study as the wellbeing of these companion animals is increasingly threatened by the spread of tick vectors and an increasingly mobile dog population. There are no widely available and effective vaccines and effective treatment can be challenging. Understanding disease pathogenesis underlies the development of new treatments. The varying pathogenicity of the various Babesia parasite species that infect dogs offers an opportunity to explore the molecular basis for the wide range of disease caused by infection with this parasite genus. In this review we focus on what has been reported about the clinical presentation of Babesia infected dogs in an attempt to compare the severity of disease caused by different Babesia species.

Atrial fibrillation (AF) is the most common cardiac arrhythmia. Its treatment includes antiarrhythmic drugs (AADs) to modulate the function of cardiac ion channels. However, AADs have been limited by proarrhythmic effects, non-cardiovascular toxicities as well as often modest antiarrhythmic efficacy. Theoretical models showed that combined blockade of Nav1.5 (and its current INa) and Kv1.5 (and its current, IKur) ion channels yield a synergistic anti-arrhythmic effect without effect on ventricles. We focused on Kv1.5 and Nav1.5 to search for structural similarities in their binding site (BS) for flecainide (a common blocker and widely prescribed AAD), as a first step for prospective rational multi-target directed ligand (MTDL) design strategies. We presented a computational workflow for flecainide BS comparison in a flecainide-Kv1.5 docking model and a solved structure of flecainide-Nav1.5 complex. The workflow includes docking, molecular dynamics, BS characterization and pattern matching. We identified a common structural pattern in flecainide BS for these channels. The latter belongs to the inner cavity and consist of a hydrophobic patch and a polar region, involving residues from S6 helix and P-loop. Since the rational MTDL design for AF is still incipient, our findings could advance multi-target atrial-selective strategies for AF treatment.

The issue of sustainability has long been the subject of interest of the architecture engineering and construction sector. All three aspects of sustainability - economic, environmental and social - can be affected through appropriate construction waste management. Construction and demolition waste (CDW) is one of the largest worldwide waste streams, therefore it is given great attention by all stakeholders (investors, contractors, authorities, etc.). Researches have shown that one of the main barriers to insufficiency CDW recovery is inadequate policies and legal frameworks to manage CDW. It is also one of the EU's environmental priorities. Aim of the article is to confirm the economic potential of construction and demolition waste audit processing through case study. A pre-demolition waste audit has been processed for unused building of shopping center in the town Snina in Slovakia. Subsequently, a comparison of economic parameters (waste disposal costs and transport costs) of recommended CDW management was performed. This comparison confirmed the economic benefits of environmentally friendly construction waste management methods according to the waste audit results, which will also increase the sustainability of construction projects. In addition, the cost parameters of selected waste disposal methods could be another dimension of building information modelling.

Bioprocesses for the production of renewable energies and materials lack efficient separation processes for the utilized microorganisms such as algae and yeasts. Dissolved air flotation (DAF) and microflotation are promising approaches to overcome this problem. The efficiency of these processes depends on the ability of microorganisms to aggregate with microbubbles in the flotation tank. In this study, different new or adapted aggregation models for microbubbles and microorganisms are compared and investigated for their range of suitability to predict the separation efficiency of microorganisms from fermentation broths. The complexity of the heteroaggregation models range from an algebraic model to a 2D population balance model (PBM) including the formation of clusters containing several bubbles and microorganisms. The effect of bubble and cell size distributions on the flotation efficiency is considered by applying PBMs, as well. To determine the impact of the model assumptions, the modeling approaches are compared and classified for their range of applicability. Evaluating computational fluid dynamics (CFD) of a DAF system shows the heterogeneity of the fluid dynamics in the flotation tank. Since analysis of the streamlines of the tank show negligible backmixing, the proposed aggregation models are coupled to the CFD data by applying a Lagrangian approach.

The shallow water equations are widely applied for the simulation of flow routing in rivers and floodplains, as well as for flood inundation mapping. From a mathematical point of view, they are a hyperbolic system of nonlinear partial differential equations, whose numerical integration is sometimes computationally burdensome. For this reason, the interest of many researchers has been focused on the study of simplified forms of the original set of equations, which requires less computational effort. One of the most commonly applied simplifications consists in neglecting the inertial terms, which changes the hyperbolic model to a parabolic one. The effects of such a choice on the outputs of the simulations of flooding events are controversial and an important topic of debate. In the present paper, two numerical models, recently proposed for the solution of the complete and zero-inertia forms of the shallow waters equations, are applied to several unsteady flow routing scenarios. We simulate synthetic and laboratory studies, starting from very simple geometries and moving towards complex topographies. Analyzing the role of the terms in the momentum equations, we try to understand the effect, on the computed results, of neglecting the inertial terms in the zero-inertia formulation. We analyze the computational costs.

The rapid spread of African swine fever virus (ASFV), causing severe and often lethal disease in domestic pigs and Eurasian wild boar, continues to be a threat for pig populations and dependent industries. Despite scientific achievements that deepen our understanding of ASFV pathogenesis, alternative transmission routes for ASFV remain to be elucidated. We previously demonstrated the efficient transmission of ASFV from infected boars to naïve recipient gilts via artificial insemination, thereby highlighting the importance of surveillance in boar semen prior to shipment. Since accurate and reliable detection of even low amounts of ASFV in boar semen is key for disease prevention and control, we established a suitable diagnostic pipeline to efficiently detect ASFV genome in boar semen. Here, we assessed sensitivity, specificity and overall performance of various routine nucleic acid extraction kits as well as qPCR protocols in detecting ASFV genome in blood and semen of boars. Feasibility of respective kits and methods for future use in boar studs was also considered. Variability in sensitivity mostly concerned samples with low to very low amounts of ASFV genome. Ultimately, we defined a well-suited pipeline to precisely detect ASFV genome in boar semen, as early as 2 days post ASFV infection.

The regional recycling of plant waste from municipal green space maintenance, private households and private gardens is traditionally carried out in partially open composting plants. In addition to climate-relevant gases, dust, germs and odours are emitted. Compared to aerobic rotting the pyrolysis at higher temperatures and/or reforming offers industrial utilisation of plant based biowaste, with additional availability of energetic by-products. A high-quality plant charcoal derived from a pilot plant is used in a one-year field trial to establish a theoretical comparability with substrates from composting. The advantages and disadvantages of composting and high-quality pyrolysis is shown for comparison, to foster further investigation in advanced technologies for production of plant charcoal aiming the sequester of biogenic Carbondioxide.

(1) Background: In patients suffering from heart failure, the main causes of death are either he-modynamic failure, or ventricular arrhythmias. The only tool to significantly reduce arrhythmic sudden death is the implantable cardioverter defibrillator (ICD), but not all patients benefit to the same extend of these devices. (2) Methods: The primary outcome of this single center study was defined as cardiovascular death in patients with ischemic and non-ischemic heart failure who have benefited from ICD therapy. The secondary outcomes were death from any cause, sudden cardiac death, ICD-related therapies (appropriate antitachycardia pacing or shock therapy for ventricular tachycardia or fi-brillation) and recurrences of ventricular tachyarrhythmias. (3) Results: A total of 403 consecutive ICD recipients – symptomatic heart failure patients with ICD for the primary prevention of sudden cardiac death – were included retrospectively: 59% is-chemic cardiomyopathy (ICMP) and 41% non-ischemic cardiomyopathy (NICMP). Within a median follow-up period of 36 months, the incidence of cardiovascular mortality was not signif-icantly different in patients with NICMP and ICMP: the primary outcome had occurred in 9 pa-tients (5.4%) in the NICMP group and in 14 patients (5.9%) in the ICMP group (hazard ratio 1; 95%confidence interval [CI] 0.45 to 2.28; p =0.97). All-cause mortality occurred in 14 of 166 pa-tients (8.4%) in NICMP group and 18 of 237 patients (7.6%) in ICMP group. Sudden cardiac death occurred in 2 patients (1.2%) in the NICMP group and in 4 patients (1.7%) in the ICMP group (hazard ratio 0.71; 95% CI, 0.13 to 3.88; P=0.69). The rate of appropriate device therapies was comparable in both groups. (4) Conclusion: In this study, ICD implantation for primary prevention of sudden cardiac death in patients with symptomatic systolic heart failure was associated with similar rates of cardiovas-cular and all-cause mortality in patients with ischemic heart disease, and in patients with heart failure from other causes. NICMP and ICMP showed comparable rates of recurrent ventricular tachyarrhythmias and appropriate ICD therapies.

Digital recruitment systems have revolutionized the hiring paradigm, imparting exceptional efficiencies and extending the reach for both employers and job seekers. This investigation scrutinizes the efficacy of classical machine learning methodologies alongside advanced large language models (LLMs) in aligning resumes with job categories. Traditional matching techniques, such as Logistic Regression, Decision Trees, Naïve Bayes, and Support Vector Machines, are constrained by the necessity of manual feature extraction, limited feature representation, and performance degradation, particularly as dataset size escalates, rendering them less suitable for large-scale applications. Conversely, LLMs like GPT-4, GPT-3, and LLAMA, adeptly process unstructured textual content, capturing nuanced language and context with greater precision. We evaluate these methodologies utilizing two datasets comprising resumes and job descriptions to ascertain accuracy, efficiency, and scalability. Our results reveal that while conventional models excel with structured data, LLMs significantly enhance the interpretation and matching of intricate textual information. This study highlights the transformative potential of LLMs in recruitment, offering insights into their application and future research avenues.

As exemplified by the global response to the SARS-CoV-2 pandemic, whole genome sequencing played an important role in monitoring the evolution of novel viral variants and provided guidance on potential antiviral treatments. The recent rapid and extensive introduction and spread of highly pathogenic avian influenza virus in Europe, North America and elsewhere raises the need for similarly rapid sequencing to aid in appropriate response and mitigation activities. To facilitate this objective, we investigated a next generation sequencing platform that uses a portable nanopore sequencing device to generate and present data in real time. This platform offers the potential to extend in-house sequencing capacities to laboratories that may otherwise lack resources to adopt sequencing technologies requiring large benchtop instruments. We evaluated this platform for routine use in a diagnostic laboratory. In this study we evaluated different primer sets for the whole genome amplification of influenza A virus and evaluated five different library preparation approaches for sequencing on the nanopore platform using the MinION flow-cell. A limited amplification procedure and a rapid procedure were found to be best among the approaches taken.

During a sanitary crisis, excess mortality measures the number of all-cause deaths, beyond what we would have expected if that crisis had not occurred. The high number of COVID-19 deaths started a debate in Italy with two opposite positions: those convinced that COVID-19 deaths were not, by default, excess deaths, because many COVID-19 deaths were not correctly registered, with the most part attributable to other causes and to the overall crisis conditions, and those who presented the opposite hypothesis. We analyzed the curve of the all-cause excess mortality, during the period January 5, 2020 – August 28, 2022, compared to the curve of the daily confirmed COVID-19 deaths, investigating the association between excess mortality and the recurrence of COVID-19 waves in Italy. We compared the two curves looking for the corresponding highest peaks and we found that 5 out of the 6 highest peaks (83.3%) of the excess mortality curve have occurred, on average, just a week before the concomitant COVID-19 waves hit their highest peaks of daily deaths (Mean 6.4 days; SD 2.4 days). This temporal correspondence between the moments when the excess mortality peaked and the highest peaks of the COVID-19 deaths provides further evidence that the all-cause excess mortality wave has been mostly driven by COVID-19 deaths

The article describes the results of comparison of occurence of buildings (and address points) in Poland with delimitations of land use belonging to particular classes in the CORINE Land Cover (CLC) 2018 dataset. Large discrepancies have been identified, which reach on average approx. 34% of addresses and 35% of buildings located outside class 1 (artificial surfaces), mainly on terrains of class 2 (agricultural areas). Among single-family buildings it was 37% and among new addresses (forecasted or ‘under construction’ buildings) – as much as 50%. This puts a question mark over the possibility of using CLC data with resolution of 25 ha for monitoring of spatial planning and development in Poland for purposes of the diagnosis and assessment of the scale of dispersion of built-up areas. It is worth carrying out similar analyses in other countries, known for the deconcentration processes and a relatively large share of dispersed settlement e.g. other CEE countries, Spain, Portugal, Italy.

The sonification of data to communicate information to a user is a relatively new approach that established itself around the 1990s. To date many researchers design their individual sonification from scratch. There are no standards in sonification design and evaluation. But researchers and practitioners have formulated several requirements and established several methods. There is wide consensus that psychoaocustics could play an important role in the sonification design and evaluation phase. But this requires an adaption of psychoacoustic methods to the signal types and the requirements of sonification. In this method paper we present PAMPAS, a PsychoAcoustical Method for the Perceptual Analysis of multidimensional Sonification. A well-defined and well-established, efficient, reliable and replicable Just Noticeable Difference experiment using the Maximum Likelihood Procedure serves as the basis to achieve linearity of parameter mapping during the sonification design stage and to identify and quantify perceptual effects during the sonification evaluation stage, namely the perceptual resolution, hysteresis effects and perceptual interferences. The experiment results are universal scores from a standardized data space and a standardized procedure. These scores can serve to compare multiple sonification designs of a single researcher, or even between different research groups. The method can supplement other sonification design and evaluation methods from a perceptual viewpoint.

We investigate the human sustainability of ICT and management changes using a French linked employer-employee survey on organizational changes and computerization (COI). We approach the human sustainability of changes through the evolutions of work intensity, skill utilization and the subjective relationship to work. We compare in the private sector and the State civil service the impacts of ICT and management changes on the evolution of these three dimensions of work experience. We find that when ICT and management changes are intense, they are positively associated in the public sector with work intensification and new knowledge. In the private sector ICT and management changes increase the use of skills, but at a rate decreasing with their intensity and without favoring the accumulation of new knowledge. However, their impacts on the subjective relationship to work are much stronger, with public sector employees expressing discouragement as well as the feeling of an increased effort-reward imbalance when private sector employees become more committed. We tested that the self-selection of employees, the specific sources and paths of changes and the implementation of performance pay did not explain this divergence. We identify two partial explanations: one is related with employee turnover in the private sector, the other one with the role of trade unions. These results suggest that the human sustainability of ICT and management changes depends on their intensity and on how their implementation takes into account the institutional context of the organization.

Background: This study conducts a comparative historical analysis of two significant drug crises: the opium epidemic in 19th-century Qing Dynasty China and the ongoing opioid crisis in the United States, aiming to extract applicable lessons for current global drug policies. Methodology: A historical case study approach was employed, integrating examinations of historical records, policy documents, and contemporary data to compare the development, impact, and responses to these crises within their respective contexts. Results: The analysis reveals significant parallels in socioeconomic impacts and governmental challenges. Key differences include the evolution from predominantly prohibitionist approaches in Qing China to more comprehensive public health-oriented strategies in the U.S. The study highlights the critical role of national power, particularly military capability, in effectively addressing drug crises. Conclusions: The findings underscore four key lessons: (1) Purely prohibitionist approaches often lead to unintended consequences such as black markets and increased criminal activity; (2) Addressing underlying socioeconomic factors contributing to drug abuse is crucial; (3) Aggressive anti-drug policies can escalate into severe diplomatic tensions, necessitating careful consideration of international relations in policy formulation; (4) A nation's military and economic strength significantly influences its ability to implement effective drug policies and resist external pressures that may exacerbate the crisis. These insights suggest that effective management of drug crises requires a balance of strong domestic policies, international cooperation, and maintenance of national power to ensure policy autonomy.

In light of the current situation where no testing equipment is available for measuring thermal deformation of objects, this paper proposes a novel method for accurate and precise measurement. The method overcomes the limitations of previous approaches that relied on pitch angle. By utilizing the principle of biplane multiple reflections, a bivariate laser spot displacement analysis algorithm is devised to attain highly precise measurements of bivariate angles. Additionally, a temperature gradient comparison algorithm is introduced to calculate the indicator test results under specific temperature conditions. To validate the effectiveness and reliability of this method, a testing system is constructed and utilized. The results demonstrate that the thermal deformation angle change test achieves an impressive accuracy of 0.015″ and a rate of thermal deformation angle change of 0.3247″/°C. These values are in close agreement with the previously simulated analysis result of 0.359″/°C, with only a relative error of 9.55%. Therefore, the test results confirm the efficacy and reliability of this testing method along with the feasibility of the algorithm processing.

Metabolic pathways provide key information to achieve a better understanding of life and all its processes; this is useful information for the improvement of medicine, agronomy, pharmacy, and other similar areas. The main analysis tool used to study these pathways is based on the idea of pathway comparison, using graph data structures. Metabolic pathway comparison has been defined as a computationally complex task \cite{ay2011submap,abaka2013campways}. In previous work from 2017, two different approaches that simplify the problem of comparing pathways represented as graphs were introduced. The first algorithm consists of the transformation of a two-dimensional graph structure, representing a metabolic pathway, to a one-dimensional structure and thus aligning the corresponding data using a reduced 1 dimension string. The second algorithm consists of performing a paired analysis between reactions in pathways and thus eliminating all similarities, finally, showing these differences to the user. The suggestion is to use the information provided by these algorithms as a previous analysis to a deeper, more expensive, comparison tool use. Here we provide an extension of this work with more data and deeper analysis. These methods have shown to be an effective way to treat the problem of metabolic pathway comparison as listed in the discussion and results section. Our results show evidence of a quick, simple and effective way to resolve the described problem.

Modern day construction is widely influenced using concrete-steel composite columns. A lot of research on concrete-steel composite columns is being carried out around the world. The rapid growth in concrete-steel composite construction has widely decreased the use of conventional reinforced cement concrete construction (R.C.C), and the steel construction practices. The concrete-steel composite construction has obtained an extensive receiving around the globe. As Pakistan is a developing country, so, it is relatively a new concept for its construction industry when compared with the developed countries around the globe. Although, the R.C.C construction is suitable and economical for construction of framing systems of low-rise buildings, however, the increased dead load, span restrictions, less stiffness and risky formwork makes it uneconomical and unviable when it comes across the construction of intermediate to high-rise buildings. This research is an effort to learn the cost effectiveness, increased or decreased stiffness, and change on the functionality of the composite construction for intermediate to high-rise buildings constructed in Pakistan. A Base + Ground + 11 storey commercial building is selected for this study. A comparison is made between conventional R.C.C columns structure and concrete-encased composite columns structure. The equivalent static nonlinear analysis is performed using ETABS 2017 software. Although, for Base + Ground + 11 storey building, the construction cost of concrete-encased composite structure is 7.7% more than the conventional R.C.C columns structure, but the concrete-encased composite structure will have 13.013% more constructed floor area. This increased floor area helps to settle the cost difference between the two structures.

This paper presents the methods of estimating the mean square error of hydrological forecasts, allowing for assessment of their practical applicability. Depending upon the amount and composition of available hydrometeorological data, an appropriate method for forecast error estimation is chosen. A system of statistical tests for comparison of different forecasting methods for the same hydrologic characteristic with the same lead time is presented. These tests allow for choosing an optimal and most accurate forecasting method. Hydrological forecasting method efficiency estimation is based on comparing the forecast error with climatology or inertial (persistence) forecast error using presented tests.

Passive plasma spectroscopy is a well-established non-intrusive diagnostic technique. Depending on the emitter and its environment which determine the dominant interactions and effects governing emission line shapes, passive spectroscopy allows the determination of electron densities, emitter and perturber temperatures as well as other quantities like abundances. However, using spectroscopy needs appropriate line shape codes retaining all the physical effects governing the emission line profiles. This requires for line shape code developers to continuously correct or improve them to increase their accuracy when applied for diagnostics. This is exactly the aim expected from code-code and code-data comparisons. In this context, the He I 492 nm emitted in a helium corona discharge at room temperature represents an ideal case since its profile results from several broadening mechanisms: Stark, Doppler, resonance and van der Waals. The importance of each broadening mechanism depends on the plasma parameters. Here the profiles of the He I 492 nm in a helium plasma computed by various codes are compared for a selected set of plasma parameters. In addition, preliminary results related to plasma parameter determination using experimental spectra from a helium corona discharge at low pressure 1- 2 bars, are presented.

Many spectroscopic diagnostics are routinely used as a technique to infer the plasma parameters from line emission spectra but their accuracy depends on the numerical model or code used for the fitting process. However, the validation of a line shape code requires some steps : comparison of the line shape code with other similar codes for some academic (simple) cases and then more complex ones, comparison of the fitting parameters obtained from the best fit of the experimental spectra with those obtained with other diagnostic techniques and/or comparison of the fitting parameters obtained by different codes to fit the same experimental data. Here we compare the profiles of the hydrogen Balmer β line in a helium plasma computed by six codes for a selected set of plasma parameters and we report on the plasma parameters inferred by each of them from the fitting to a number of experimental spectra measured in a helium corona discharge where the pressure was in the range 1- 5 bar.

Is it true that the nuclear technology applied to electric energy generation offers a clean, safe, reliable and affordable i.e. sustainable alternative? Yes it is, but its impact on the environment strongly depends on the implementation bearing residual risks due to a human factor, technical failures or natural catastrophes. A full response is therefore difficult and can first be given when the wicked multi-disciplinary problems get well formulated and “solved”. These problems have multi-dimensional nature lying at the interface between: necessary R&D effort, the industrial deployment and the technology impact in view of the environmental sustainability including the management of produced hazardous waste. This enormous complexity indicates that just a description of the problem might represent a problem. The paper proposes a holistic approach to assess the nuclear energy systems potential with respect to sustainable performance applying Multi-criteria decision analysis with a suitable objective tree and a multi-level criteria structure and examines the trading-off techniques for ranking of the alternatives. The framework proposes a multi-criteria and multi-stakeholders treatment which can be used as a pre-decisional support towards an implementation of nuclear fuel cycles adapted to national preferences and priorities. Proposed approach addresses some aspects of the environmental footprint of nuclear energy systems. Advanced nuclear fuel cycles, previously investigated by the NEA/OECD expert group WASTEMAN, are analyzed as a case study. Sustainability facets of waste management, resource utilization and economics are in focus.

The Mann-Whitney effect is a measure for comparing survival distributions between two groups. The Mann-Whitney effect is interpreted as the probability that a randomly selected subject in a group survives longer than a randomly selected subject in the other group. Under the independence assumption of two groups, the Mann-Whitney effect can be expressed as the traditional integral formula of survival functions. However, when the survival times in two groups are not independent each other, the traditional expression of the Mann-Whitney effect has to be modified. In this article, we propose a copula-based approach to compute the Mann-Witney effect with parametric survival models under dependence of two groups, which may arise in the potential outcome framework. In addition, we develop a Shiny web app that can implement the proposed method via simple commands (https://nkosuke.shinyapps.io/shiny_survival/). Through a simulation study, we show the correctness of the proposed calculator. We apply the proposed methods to two real datasets.

Electromobility promises to efficiently mitigate consequences of increasing traffic volume and its accompanied greenhouse gas emissions. On an individual level, electrified bikes allow emission free electrified mobility at moderate costs and consequently their stock has increased significantly in recent years. This simultaneously increases the demand for spare parts, which are often manufacturer or application-specific, and due to many variants, challenging to provide for the market. This article evaluates powder-based and extrusion-based metal additive manufacturing of a typical electrified bike component to demonstrate an alternative spare parts supply. The investigation demonstrates how these parts can be additively manufactured function equivalent and with sufficient mechanical properties, also taking economical aspects into account. Furthermore, the needed resources and related environmental consequences for metal-based additive manufacturing spare-part production are compared for both process routes. The results show that both routes are capable of producing spare-parts at comparatively same mechanical performance and resource costs, while needed resources such as energy, gases and manufacturing time are significantly lower for powder-based, respectively machine costs for extrusion-based additive manufacturing. Therefore, additive manufacturing offers a promising opportunity to produce parts in small quantities resource efficient and rapidly.

Based upon 30-years of research by the author a new approach to hospital bed planning and international benchmarking is proposed. The number of hospital beds per 1000 population is commonly used to compare international bed numbers. This method is flawed because it does not consider population age structure or the effect of nearness-to-death on hospital utilization. Deaths are also serving as a proxy for wider bed demand arising from undetected outbreaks of 3000 species of human pathogens. To remedy this problem a new approach to bed modelling has been developed which plots beds per 1000 deaths against deaths per 1000 population. Lines of equivalence can be drawn on the plot to delineate countries with higher or lower bed supply. This method is extended to attempt to define the optimum region for bed supply in an effective health care system. England is used as an example of a health system descending into operational chaos due to too few beds and manpower. The former Soviet bloc countries represent a health system overly dependent on hospital beds. Several countries also show evidence for over-utilization of hospital beds. The new method is used to define a potential range for bed supply and manpower where the current most effective health systems currently reside. The method is applied to total curative beds, medical beds, psychiatric beds, critical care, geriatric care, etc., and can also be used to compare different types of healthcare staff, i.e., nurses, physicians, surgeons. Issues surrounding the optimum hospital size and the optimum average occupancy will also be discussed. The role of poor policy in the English NHS is used to show how the NHS has been led into a bed crisis. The method is also extended beyond international benchmarking to illustrate how it can be applied at a local or regional level in the process of long-term bed planning. Issues regarding the volatility in hospital admissions are also addressed to explain the need for surge capacity and why an adequate average bed occupancy margin is required for an optimally functioning hospital.

Directional protective relaying based on amplitude comparison of traveling wave on continuous co-phase auto-transformer(AT) power transmission system was proposed. Phase-model transformation is used for decoupling transient fault signals and get aerial mode component. The forward and backward traveling wave are obtained by calculating aerial mode component, then the intrinsic mode function(IMF) components can be obtained through Variational Mode Decomposition(VMD), the module maxima are obtained through calculating the IMF components. The fault direction is determined by the ratio of fault components. If two faults relays at the ends of electric traction networks detect a fault to be in the forward direction, the fault occurred in the internal area, the protection would operate properly. The simulation tests indicate that the protection scheme is feasible, and the proposed protection method can discriminate internal faults from external faults under various fault types, and its performances are immune to fault initial angle, ground resistance, etc.

Assessment of the percentage of disease infected lung volume using computed tomography (CT) images can play an important role to detect lung diseases and predict disease severity. However, manual segmentation of disease infected regions from many CT image slices is tedious and not feasible in clinical practice. To help solve this clinical challenge, this study aims to investigate a new strategy to automatically segment disease infected regions and predict disease severity. We employed a public dataset acquired from 20 COVID-19 patients, which includes manually annotated lung and infections masks, to train a new ensembled deep learning (DL) model that combines the five customized residual attention UNet models to segment disease infected regions followed by a Feature Pyramid Network (FPN) model to classify severity stage of COVID-19 infection. To test potentially clinical utility of new model, we first gathered and processed another set of CT images acquired from 80 Covid-19 patients. Next, we asked two chest radiologists to read CT images of each patient and report the estimated percentage of infected lung volume and disease severity level. Additionally, we asked radiologists to rate acceptance of DL model-generated segmentation results using a 5-scale rating method. Data analysis results show that agreement between disease severity classification is &gt;90% in 45 testing cases. Furthermore, &gt;73% of cases received the high rating score from two radiologists (scored more than 4). This study demonstrates feasibility of developing a new DL-model to efficiently provide quantitative assessment of disease severity based on the automated segmentation of the disease infected regions to support improving efficacy of radiologists in disease diagnosis.

Heat metres are used to calculate the consumed energy in central heating systems. The subject of this article is to prepare a method of predicting a failure of a heat meter in the next settlement period. Predicting failures is essential to coordinate the process of exchanging the heat metres and to avoid inaccurate readings, incorrect billing and additional costs. The reliability analysis of heat metres was based on historical data collected over many years. Three independent models of machine learning were proposed, and they were applied to predict failures of metres. The efficiency of the models was confirmed and compared using the selected metrics. The optimisation of hyperparameters characteristics for each of models was successfully applied. The article shows that the diagnostics of devices does not have to rely only on newly collected information, but it is also possible to use the existing big data sets.

The most common long-term complication of silicone breast implants (SMI) remains capsular fibrosis. The etiology of this exaggerated implant encapsulation is multifactorial but primarily induced by the host response towards the foreign material silicone. Identified risk factors included specific implant topographies. Of note, breast implant-associated anaplastic large cell lymphoma (BIA-ALCL), has only been observed in response to textured surface implants. We hypothesize that reduction of SMI surface roughness causes less host response hence better cosmetic outcome with fewer complications for the patient. A total of 7 patients received the routinely used CPX®4 breast expander (~60 µM Ra) and the novel SmoothSilk® (~ 4 µM Ra), fixed prepectoral with a titanised mesh pocket and randomized to the left or right breast after bilateral prophylactic NSME (nipple-sparing mastectomy). We aimed to compare the postoperative outcome regarding capsule thickness, seroma formation, rippling, implant dislocation as well as comfortability and practicability. Our analysis shows that surface roughness is an influential parameter in controlling fibrotic implant encapsulation. First time intra-individually compared in patients, our data confirm an improved biocompatibility with minor capsule formation around SmoothSilk® implants with an average shell roughness of 4 µM and in addition an amplification of host response by titanised implant pockets.

In the context of healthcare technology management (HTM) in Saudi Arabia and the Gulf region, this study addresses a significant gap by exploring both external and internal risk factors affecting HTM performance. Previous research has primarily focused on modeling or predicting failures in medical devices, mostly examining internal (endogenous) factors that impact device performance and the development of optimal service strategies. However, a comprehensive investigation of external (exogenous) factors has been notably absent. This research introduces a novel hierarchical risk management framework, designed to accommodate the broad array of healthcare technologies, not limited to medical devices. It significantly advances the field by thoroughly investigating and validating a comprehensive set of 53 risk factors and assessing their influence on HTM. Additionally, this study embraces the perspective of enterprise risk management (ERM) and expands it to identify and incorporate a wider range of risk factors, offering a more holistic and strategic approach to risk assessment in healthcare technology management. The findings reveal that several external and internal factors previously underexplored significantly impact HTM performance. Notably, the Fuzzy AHP survey identified “design risk” under facility and environmental risks as the highest risk for HTM in the region. Furthermore, the study reveals that three out of the top ten risks are related to “facility and internal environmental” factors, six are related to technological endogenous factors, and only one is related to managerial factors. This distribution underscores the critical areas for intervention and the need for robust facility and technology management strategies. In conclusion, this research not only fills a critical void by providing a robust framework for healthcare technology risk assessment but also broadens the scope of risk analysis to include a wider array of technologies, thereby enhancing the efficacy and safety of healthcare interventions in the region. Additionally, the proposed hierarchy provides insights into the underlying risk factors for healthcare technology management, with potential applications extending beyond the regional context to a global scale. Moreover, the equation we propose offers a novel perspective on the key risk factors involved in healthcare technology management, presenting insights with far-reaching implications applicable not only regionally but also on a global level. This framework also supports sustainability goals by encouraging the efficient and responsible utilization and management of healthcare technologies, essential for ensuring the long-term economic and environmental sustainability of medical technology use.