This paper shows the results of applying high-resolution Unmanned Aircraft System (UAS) photogrammetric surveying on a large landslide. A real case study, where permanently installing GCPs could be complex, where natural shaped and formed land pose severe limitations in deploying ground targets with optimal geometric configuration. We analysed performances in terms of survey accuracy obtained by performing photogrammetric surveys through the Zenmuse P1 DJI optical camera and Phantom 4 Pro 2. In combination with DJI Matrice 300 UAS, the P1 camera allows direct georeferencing through GNSS observations in RTK mode. Photogrammetric surveys, performed through different georeferencing methods, have been compared. Several targets have been permanently installed on the ground over the maximum vegetation height to guarantee long-lasting reference over the years in the area, which is characterised by a diffuse short vegetation coverage. Multitemporal UAS surveys have been then compared using Digital Image Correlation (DIC) algorithms, and deformation maps have been produced. Afterwards, DIC results were compared with observations made by the GNSS ground-based permanent receivers resulting in a standard deviation of 0,077 m. Through results analysis, good accordance between ground-based GNSS observations and DIC analysis on the photogrammetric surveys have been identified for the same time span. To conclude, this type of landslide presents a moderate deformation speed; in such a case, effective deformations monitoring could be achieved using pseudo-direct georeferencing, which permitted a 0.24 m accuracy on the whole tested area.

Understanding the effect of staking sequences and identifying the damage occurring within a structure using a structural health monitoring system are the keys to an efficient design of composite-based parts. In this research, a combination of digital image correlation (DIC) and acoustic emission (AE) is used to locate and classify the type of damage depending on the stacking sequence of the laminate during flexural loading. A comparison of the strain field results for unidirectional, cross-ply, and quasi-isotropic laminates was made in a first attempt to discuss their global behavior and to correlate the different damage patterns with the possible failure mechanisms. The damage was then addressed using a comprehensive interpretation of the acoustic emission signatures using the K-means classification of the acoustic events. The development of each damage mechanism was correlated to the applied load and expressed as a function of the loading rate to highlight the effect of the stacking sequence. Finally, the results of DIC and AE were combined to improve the reliability of the damage investigation without limiting the failure mechanism to matrix cracking, interfacial failure, and fiber breakage, as expected by the unsupervised event clustering.

Digital Image Correlation (DIC) is an optical technique used to measure surface displacements and strains in materials and structures. This technique has demonstrated significant utility in structural examination and monitoring. This manuscript offers a comprehensive review of contemporary research and applications that have leveraged the DIC technique in laboratory-based structural tests. The reviewed works encompass a broad spectrum of structural components, such as concrete beams, columns, pillars, masonry walls, infills, composite materials, structural joints, steel beams, slabs, and other structural elements. These investigations have underscored the efficacy of DIC as a metrological instrument for precise quantification of surface deformation and strain in these structural components. Moreover, the constraints of the DIC technique have been highlighted, especially in scenarios involving extensive or complex test configurations. Notwithstanding these constraints, the DIC methodology has validated its effectiveness as a strain measurement instrument, offering numerous benefits such as non-invasive operation, full-field measurement capability, high precision, real-time surveillance, and compatibility with integration into other measurement instruments and methodologies.

Owing to the advantages of cost-effectiveness, compactness, and the avoidance of complicated camera synchronization, single-camera three-dimensional (3D) digital image correlation (DIC) techniques have gained increasing attention for deformation measurement of materials and structures. In the traditional single-camera 3D-DIC system, the left and right view images can be recorded by a single camera using a diffraction grating, a bi-prism or a set of planar mirrors. To further improve the measurement accuracy of single-camera 3D-DIC, this paper introduces a single-camera four-view imaging technique by installing a pyramidal prism in front of the camera. The 3D reconstruction of the measured points before and after deformation is realized with eight governing equations induced by four views, and the strong geometric constraints of four views can help to improve the measurement accuracy. A static experiment, a rigid body translation experiment and a four-point bending experiment show that the proposed single-camera 3D-DIC method can achieve higher measurement accuracy than the dual-view single-camera 3D-DIC techniques and has advantages in reducing both random error and systematic error.

Aircraft heat exchangers play a crucial role in maintaining thermal balance and ensuring that essential components operate efficiently and safely. In this context, it is highly relevant to gain knowledge about the deterioration and the predominant damage mechanisms of these components. In this study, two different non-destructive methods are employed to analyze the damage initiation of a heat exchanger part during fatigue test. On the one hand, Acoustic Emission technique is employed using membrane-free microphones capable of capturing a broad bandwidth. The acoustic events were classified by a machine learning algorithm to determine their source and damage mechanisms. On the other side, Digital Image Correlation (DIC) allowed the measurement of the strain evolution along the test and more precisely, redistributions were considered as damage indicators. As a result, it was identified that AE served as early damage indicator as the cumulative number of events was in good agreement with the severity of the damage. With respect to classification two clear clusters ascribed to different type of events were identified. In the case of DIC, strain redistributions gave clear indications of damage or deterioration but at a later stage compared to AE

To accurately and non-destructively monitor the growth of spring wheat in the Hetao Irrigation Area, UAV remote sensing was employed during various fertility stages. Digital image indices from diverse fertilization treatments were calculated and compared with physiological indices to identify the most sensitive digital image indices corresponding to these indices. The study underscored the critical importance of the flowering stage in the growth of spring wheat, thus highlighting the necessity of focusing on this stage. This finding reiterated that the flowering stage was pivotal for spring wheat development in the Hetao Irrigation Area. Several digital image indices, such as GLA, R, G, INT, g, GRVI, MGRVI, RGBVI, EXG, and GRRI, exhibited a high frequency of significant correlations with physiological indices during the four primary reproductive stages of wheat. Consequently, these sensitive digital image indices during the flowering stage can more effectively characterize the physiological indices of spring wheat.

Large structures such as wind turbines are subject to environmental factors and varying operational loads which may result in structural damage, making components of these large structures prone to performance and mechanical degradation. The use of high-definition optical vision sensors in digital image correlation (DIC) allow for the application of a non-destructive image registration technique in which it measures finite three-dimensional deformations on surfaces through correlations of a unique pattern or set of unique localized patterns. However, the physical placement of an artificial marker such as a unique speckled pattern on the surface of the structure is time-consuming and often impractical for large structures. Therefore, we propose a novel auto-mated methodology that searches and segments salient and unique regions of an image as well as for all subsequent images to assist in performing efficient displacement measurements for vibrational study and structural health monitoring purposes. Our algorithm is validated on a con-trolled set of images, as well as on a small structure and large real-world wind turbine, which suggests the algorithm’s efficacy without the use of artificial markers for large structural health monitoring.

Many dedicated designs for real-time operations provide functionality on fixed-sized operators, but where speed, scalability, and flexibility are required, extensive research is demanded. Dedicated designs can provide real-time processing for many applications. This paper presents an FPGA-based design of a general image processor. The proposed design is based on a fixed-point representation of binary numbers. The proposed design provides a mechanism to manage matrices on-chip along with matrix arithmetic. The matrices are represented with simple identifiers and microinstruction that assist in the computation of many operations which are useful for solving complex problems. The design was successfully implemented and tested using VHDL language. The proposed design is an efficient architecture as a standalone processor with all embedding computational resources necessary for an embedded image processing application.

Egyptian cotton is one of the most important commodities to the Egyptian economy and is renowned globally for its quality, which is currently graded by manual inspection. This has several drawbacks including significant labour requirement, low inspection efficiency, and influence from inspection conditions such as light and human subjectivity. This current work uses a low-cost colour vision system, combined with machine learning to predict the cotton lint grade of the cultivars Giza 86, 97, 90, 94 and 96. Unsupervised and supervised machine learning approaches were explored and compared. Three different supervised learning algorithms were evaluated: linear discriminant analysis, decision trees and ensemble modelling. The highest accuracy models (77.3-98.2%) used an ensemble modelling technique to classify samples within the Egyptian cotton grades: Fully Good, Good, Fully Good Fair, Good Fair and Fully Fair. The unsupervised learning technique k-means showed that human error is more likely to occur when classifying lint belonging to the higher quality grades and underlined the need for an intelligent system to replace manual inspection.

A single paragraph of about 200 words maximum. For research articles, abstracts should give a pertinent overview of the work. We strongly encourage authors to use the following style of structured abstracts, but without headings: (1) Background: place the question addressed in a broad context and highlight the purpose of the study; (2) Methods: describe briefly the main methods or treatments applied; (3) Results: summarize the article’s main findings; (4) Conclusions: indicate the main conclusions or interpretations. The abstract should be an objective representation of the article, it must not contain results which are not presented and substantiated in the main text and should not exaggerate the main conclusions.

Cancer diagnosis and classification are pivotal for effective patient management and treatment planning. In this study, we present a comprehensive approach utilizing ensemble deep learning techniques to analyze breast cancer histopathology images. Our datasets are based on two widely employed datasets from different centers for two different tasks: BACH and BreakHis. Within the BACH Dataset, we deployed an ensemble strategy incorporating VGG16 and ResNet50 architec-tures to achieve precise classification of breast cancer histopathology images. Introducing a novel image patching technique, to preprocess a high-resolution image, which facilitates focused analysis of localized regions of interest. The annotated BACH dataset encompasses 400 WSIs across four distinct classes: Normal, Benign, In Situ Carcinoma, and Invasive Carcinoma. In addition, we employed the BreakHis dataset, utilizing VGG16, ResNet34, and ResNet50 models to classify mi-croscopic images into eight distinct categories (four benign and four malignant). For both models we leveraged a five-fold cross-validation approach for rigorous training and testing. Preliminary ex-perimental results indicate a Patch classification accuracy of 95.31% (on BACH dataset) and WSI image classification accuracy of 98.43% (BreakHis). This research significantly contributes to on-going endeavors in harnessing artificial intelligence to advance breast cancer diagnosis, potentially fostering improved patient outcomes and alleviating healthcare burdens.

Precision agriculture is a farm management technology that involves sensing and then responding to the observed variability in the field. Remote sensing is one of the tools of precision agriculture. The emergence of small unmanned aerial vehicles (sUAV) have paved the way to accessible remote sensing tools for farmers. This paper describes the comparison of two popular off-the-shelf sUAVs: 3DR Iris and DJI Phantom 2. Both units are equipped with a camera gimbal attached with a GoPro camera. The comparison of the two sUAV involves a hovering test and a rectilinear motion test. In the hovering test, the sUAV was allowed to hover over a known object and images were taken every second for two minutes. The position of the object in the images was measured and this was used to assess the stability of the sUAV while hovering. In the rectilinear test, the sUAV was allowed to follow a straight path and images of a lined track were acquired. The lines on the images were then measured on how accurate the sUAV followed the path. Results showed that both sUAV performed well in both the hovering test and the rectilinear motion test. This demonstrates that both sUAVs can be used for agricultural monitoring.

The agricultural sector is undergoing a revolution that requires sustainable solutions to the challenges that arise from traditional farming methods. To address these challenges, technical and sustainable support is needed to develop projects that improve crop performance. This study focuses on the onion crop and the challenges presented throughout its phenological cycle. Aerial monitoring using unmanned aerial vehicles (UAV) and digital image processing were used to identify patterns in the onion crop, including humid areas, weed growth, vegetation deficits, and decreased harvest performance. An algorithm was developed to identify the patterns that most affected crop growth, as the average local production reported was 40.166 ton/ha, but only 25.00 ton/ha was reached due to blight caused by constant humidity and limited sunlight. This resulted in the death of leaves and poor development of bulbs, with 50% of the production being of medium size. It is estimated that approximately 20% of the production was lost due to blight and unfavorable weather conditions.

This paper has two major parts. In the first part histogram equalization for the image enhancement was implemented without using the built-in function in MATLAB. Here, at first, a color image of a rat was chosen and the image was transformed into a grayscale image. After this conversion, histogram equalization was implemented on the grayscale image. Later on, in the same image for each RGB channel, histogram equalization was implemented to observe the effect of histogram equalization on each channel. In the end, the histogram equalization was implemented to this specific color image of a rat. In the second part, for the grayscale image in part 1, the desired histogram of another colored image of a rat was introduced and histogram specification was implemented on the original colored image.

This paper has two major parts. In the first part histogram equalization for the image enhancement was implemented without using the built-in function in MATLAB. Here, at first, a color image of a rat was chosen and the image was transformed into a grayscale image. After this conversion, histogram equalization was implemented on the grayscale image. Later on, in the same image for each RGB channel, histogram equalization was implemented to observe the effect of histogram equalization on each channel. In the end, the histogram equalization was implemented to this specific color image of a rat. In the second part, for the grayscale image in part 1, the desired histogram of another colored image of a rat was introduced and histogram specification was implemented on the original colored image.

Breast cancer is a leading cause of death among women. Conventional screening methods, such as mammography, and ultrasound diagnosis are expensive and have significant limitations. Digital Image Elasto Tomography (DIET) is a new noninvasive breast cancer screening system that has a potential to be a low cost and reliable breast cancer screening tool. It is based on modal analysis of the breast mass, and stereographic 3D image analysis to detect the stiffer abnormal tissues. However, camera sensor noise, especially Gaussian noise is a major source of Optical Flow (OF) error in this approach to tumor detection. This work studies the performance of different conventional filters, including the standard Gaussian filter tool to remove this noise and produce more robust screening results. A radical approach, Multiple Frame Noise Removal (MFNR) is proposed, for use in this type of medical image processing instead of a Gaussian filter or other typical image noise removal tools. Its a multiple frame noise removal method where Probability Density Function (PDF) of noise is extracted from the multiple images by characterizing the same pixel positions in multiple images. The noise becomes deterministic, and hence easily removed. The proposed algorithm was applied to a data set from 10 phantom breast tests with a prototype DIET system, and 10 in-vivo samples from healthy women. Comparisons were made to an optimal Gaussian filter form that is commonly used. Reductions in OF error using these digitally imaged data sets was used to compare performance. Refinement of the images for medical applications requires higher PSNR, which was successfully achieved by using MFNR algorithm. In this study, the algorithm was used to improve the imaging results of a DIET system. The conventional wisdom that states that noise removal and detail preservation are contrasting effects is

Analytical instruments used for scientific research and education are often expensive. This limitation poses a challenge for schools and educators in low-income countries to provide practical science training to students. To address this problem, the improvisation of analytical instruments and instructional materials has emerged as a viable solution. By incorporating practical experiments into science education, students have the opportunity to engage directly with scientific instruments, conduct investigations, and collect data. This hands-on approach fosters a deeper understanding of scientific principles, enhances critical thinking skills, and cultivates scientific mindsets among students. Herein, we review and discuss, step-by-step, the approach of using a smartphone for quantitative analysis, referred to as smartphone digital image colorimetry (SDIC). SDIC, with its practicality and accessibility, utilizes smartphone digital cameras for image acquisition and the freely available image processing programs, such as ImageJ and smartphone Apps, for image quantification. Using SDIC can enable students in low-income countries to develop essential scientific skills, including critical thinking, data interpretation, and an evidence-based approach to scientific research. By leveraging the ubiquity and affordability of smartphone technology, SDIC offers an accessible and cost-effective approach to practical science education, bridging the gap between theory and practice in resource-constrained settings.

Artificial intelligence provides a new research concept for digital image processing. However, at present, artificial intelligence is rarely introduced into the teaching of digital image processing in colleges and universities, and there are problems such as obsolete teaching content, single teaching methods, and simple course experiments, which affect the teaching effect and are not conducive to the cultivation of comprehensive and innovative talents. Digital image processing technology brings more possibilities to communication engineering and makes communication more convenient. For example, video calls and photo transmission make people's communication methods in daily life more and more diversified. Time and space limitations allow people to meet online, creating more communication possibilities. However, there are still many problems and methods worthy of in-depth exploration. Therefore, this paper has a comprehensive understanding and mastery of the traditional and deep learning methods of digital image processing to improve the relevant project practice and scientific research exploration ability and refer for similar research conclusions.

To reduce the redundant counting of TDC in high-speed applications and thus reduce power consumption, a TDC architecture is proposed to quantify the difference between two adjacent rows of pixel signals. This structure can remove the identical part between two rows of pixel signals by adjusting the start and stop signal of the TDC, which will reduce the number of flipping of D flip-flops in the TDC. In the 110nm CMOS process, simulation results show that this design achieves an effective number of bits (ENOB) of 4.72 bits and a Figure of Merit (FoM) of 104.7 fJ/step - 162.3 fJ/step with a power consumption ranging from 60 µW to 93 µW. Compared with traditional counting methods, the proposed TDC can reduce counting power consumption by 30%.

The primary objective of this study was to demonstrate the potential of digital image analysis as a tool to identify microplastic (MP) particles in surface waters and to facilitate their characterisation in terms of 2D and 3D morphology. Digital image analysis preceded by microscopic analysis was used for an exhaustive quantitative and qualitative evaluation of MPs isolated from the Vistula river. Using image processing procedures, 2D and 3D shape descriptors were determined. The Principal Components Analysis (PCA) was used to interpret the relationships between the parameters studied, characterising MP particle geometry, type and colour. This multivariate analysis of the data allowed 3 or 4 main factors to be extracted, explaining approximately 90% of the variation in the data characterising MP morphology. It was found that the first principal component for granules, flakes and films was largely represented by strongly correlated with 2D shape descriptors (area, perimeter, equivalent area diameter) and 3D shape descriptors (CSF, Compactness, Dimensionality). Considering the scraps, PC1 was represented by only five of the above descriptors, and the Compactness variable had the largest contribution to PC2. In addition, for granules, flakes and films, a relationship between 2D shape and the colour of their particles could be observed. For the most numerous MP group identified of multicoloured scraps, no such association was found. The results of our study can be used for further multivariate analysis regarding the presence of microplastic floating on the river surface, with a particular focus on particles of secondary origin. This is of key importance for optimising future efforts in conducting small-scale and multidimensional monitoring of and reducing plastics in the aquatic environment.

Spatial-structured longitudinal light beams are optical fields sculpted in three-dimensional (3D) space by diffractive optical elements. These beams have been recently suggested for use in im-proving several imaging capabilities, such as 3D imaging, enhancing image resolution, engineering the depth of field, and sectioning 3D scenes. All these imaging tasks are performed using coded aperture correlation holography systems. Each system designed for a specific application is characterized by a point spread function of a different spatial-structured longitudinal light beam. This article reviews the topic of applying certain structured light beams for optical imaging.

Hydration and fluids detected with bioimpdance can be confounderdby ecw expansion and overload. to estimates with sufficient accuracy body fat A confrontation with imaging and dxa is confirmatory

In response to the growing inspection demand exerted by process automation in component manufacturing, Non-destructive testing (NDT) continues to explore automated approaches that utilize deep learning algorithms for defect identification, including within digital X-ray radiography images. This necessitates a thorough understanding of the implication of image quality parameters on the performance of these deep learning models. This study investigates the influence of two image quality parameters, namely Signal-to-Noise Ratio (SNR) and Contrast-to-Noise Ratio (CNR), on the performance of U-net deep learning segmentation model. Input images were acquired with varying combinations of exposure factors such as kilovoltage, milli-ampere, and exposure time, which altered the resultant quality. The data was sorted into 5 different datasets according to their measured SNR and CNR values. The deep learning model was trained 5 distinct times, utilizing a unique dataset for each training session. Training the model with high CNR values yielded an intersection over Union (IoU) metric of 0.9594 on test data of the same category but drops to 0.5875 when tested on lower CNR test data. The result in this study emphasizes the importance of achieving a balance in training dataset according to the investigated quality parameters, to enhance the performance of deep learning segmentation models in NDT radiography applications.

Nowadays, transactions carried out with digital currencies are increasing. Modern societies are asked to respond to growing challenges related to the management of digital currencies in their daily lives. However, due to the lack of digital skills of users, the management of digital currencies hides risks. To the best of our knowledge, the originality of the current research lies in the act of combining the concept of digital skills with the use of digital currencies. After all, the use of digital currencies is constantly increasing, which means that citizens should familiarize themselves with their use, an element that makes this study valuable for digital societies. Digital skills effectively contribute to the development of digital societies because they increase the employment of citizens, facilitate access to information, and contribute to the social inclusion of individuals through digital communication, while also increasing efficiency and productivity in the workplace. Also, the government and banking institutions can more effectively sensitize citizens to digital skills for more effective use of digital currencies. In this way, tax payments will be facilitated, the use of e-wallets will be safer, and e-governance will be greatly promoted, while the quality of banking services will be improved. The methodology of this study was based on the Digital Competence Framework for Modern Societies (DigComp) and was applied through a questionnaire completed by 443 respondents. The main objective was to evaluate their digital skills from the perspective of digital currency use. The analysis of the responses was carried out by using Structural Equation Modeling (SEM). The most important result from this research reveals that users of digital currencies are significantly capable of developing communication to solve everyday problems. At the same time, users of digital currencies mostly detect digital threats and effectively manage fake news without being affected by them. However, users of digital currencies consider that security issues are important, but only for transactions and not for their supporting functions. The study concludes with suggestions for improving the experience of digital currency users through individual actions, thus having a positive impact on the state and banking institutions.

Art therapy fosters emotional healing and growth. This process can offer healthcare professionals (HCPs) novel insights into patients’ medication experiences. We developed a Metaverse Art Gal-lery of Image Chronicles (MAGIC), which depicted patients’ medication experiences symbolically as hero-villain portrayals. This gallery aimed to enhance healthcare students’ learning through re-latable insights into patients’ medication therapies. A character sheet was used to craft patients’ personifications of their medication experiences. ChatGPT, NightCafe, Canva, HeyGen and Cam-tasia were used to generate hero-villain portraits based on the character traits and mounted in MAGIC, which consisted of three virtual realms, each with a unique theme. Alpha-testing among sixteen Generation Z healthcare learners indicated that the content in MAGIC enabled them to understand the concepts of medication adherence (93.7%), art therapy (87.5%) and how patients related to their medications (81.3%). Perceived playfulness (rs=0.925, p

Background: Processing whole-slide images (WSI) to train neural networks can be intricate and laborious. We developed an open-source library covering recurrent tasks in processing of WSI and in evaluating the performance of the trained networks for classification tasks. Methods: Two histopathology use-cases were selected. First we aimed to train a CNN to distinguish H&E-stained slides obtained from neuropathologically classified low-grade epilepsy-associated dysembryoplastic neuroepithelial tumor (DNET) and ganglioglioma (GG). The second project we trained a convolutional neural network (CNN) to predict the hormone expression of pituitary adenoms only from hematoxylin and eosin (H&E) stained slides. In the same approach, we addressed the issue to also predict clinically silent corticotroph adenoma. We included four clinico-pathological disease conditions in a multilabel approach. Results: Our best performing CNN achieved an area under the curve (AUC) of 0.97 for the receiver operating characteristic (ROC) for corticotroph adenoma, 0.86 for silent corticotroph adenoma and 0.98 for gonadotroph adenoma. Our DNET-GG classifier achieved an AUC of 1.00 for the ROC curve. All scores were calculated with the help of our library on predictions on a case basis. Conclusions: Our comprehensive library is most helpful to standardize the work-flow and minimize the work-burden in training CNN. It is also compatible with fastai. Indeed, our new CNNs reliably extracted neuropathologically relevant information from the H&E staining only. This approach will supplement the clinico-pathological diagnosis of brain tumors, which is currently based on cost-intense microscopic examination and variable panels of immunohistochemical stainings.

In the paper, we explore the notion of global digital citizenship, particularly with respect to museums and cultural heritage organizations. In this perspectives study, we explore current examples of how museums can adapt to the tenets of global digital citizenship necessary to navigate and participate in increasingly interconnected digital worlds and culture, and to collectively address global challenges.

Purpose of review: In this review, we discuss the importance of digital health equity and how social determinants of health (and intersectionality with race, ethnicity, and gender) affect cardiovascular health-related outcomes in digital health trials. We propose strategies to improve digital health equity as we move to a digitally-connected world for healthcare applications and beyond.Recent findings: Digital health has immense promise to improve population health by reaching individuals in their homes, at their preferred times. However, initial data demonstrate decreased patient engagement and worse cardiovascular outcomes for racial and ethnic minorities, leading to unequal uptake of digital health technologies. In addition, while women generally have higher uptake of technology, they are less likely to be referred by clinicians for digital health interventions. We highlight several exemplar trials and analyze their methodology for replication in future digital health research.Summary: The promise of digital health equity has not been reached due to exclusionary practices. Specific focus must be placed on societal/governmental policies that enable digital inclusion, particularly of racial and ethnic minority populations and women, to ensure that the expansion of digital health technologies does not exacerbate existing health disparities.

Digital transformation has become the top priority for 80% of sports companies worldwide, but statistics show that between 70% and 95% of all digital transformation projects fail due to signif-icant and varied challenges that sports companies face during the process of digital transfor-mation. This is because strategy, not digital technology, drives digital transformation, and suc-cess is unlikely without a mature digital transformation model. Moreover, the digital transfor-mation model of developing and emerging markets is not the same and cannot be adopted as a blueprint. Therefore, the aim of this research was to propose a framework for the digital trans-formation maturity of esports businesses in developing and emerging markets. Semi-structured interviews were conducted with a sample of 15 stakeholders of esports businesses in Iran. Thematic analysis was used to analyze the interviews, and three main perspectives were identified: (1) enablers, (2) digital resilience and capabilities, and (3) digital transformation ma-turity stages. The enablers were formed by six sub-themes, including governance and leader-ship, strategy, culture and skills, innovation, technology, and data. Digital resilience and capa-bilities were formed by four sub-themes, including business model and ecosystem, digital cus-tomer experience, digital employee experience, and digital processes. Additionally, it was found that digital transformation maturity stages are based on four stages of digital beginners, digital followers, digital conservatives, and digital leaders. The findings indicate that moving towards digital transformation and achieving digital resilience in esports businesses will be impossible without synergy between enablers and digital resilience and capabilities. This framework can be useful for esports businesses to evaluate their current digital status and effectively guide them towards a desirable digital status. Furthermore, esports businesses can prioritize their efforts and resources for digital transformation by focusing on targeted capabilities and enablers and ensure more effective and efficient allocation of resources towards digital transformation.

The changing of banking customer preferences after Covid-19 pandemic encourages banking transformation. Neobanks emerges as innovation in banking that enter the market to compete with the incumbent banks by offering new digital experience for customer. This paper analyzes the neobanks which transformed from traditional bank, specifically its efficiency after they implement digital transformation. Efficiency is measured by using Stochastic Frontier Analysis (SFA). This study also uses Pooled Mean Group (PMG) of Panel ARDL (Autoregressive Distributed Lagged) to investigate digital transformation as one of determinants neobank’s efficiency, as well as to examine the existence of short-term and long-term relationship between digital transformation and efficiency. The SFA results show that the efficiency of the neobanks increase after they carry out digital transformation. Furthermore, from PMG Panel ARDL, it can be concluded that digital transformation is one of determinant of efficiency and there is longevity relationship between digital transformation and efficiency. In the short run, digital transformation has a significant and negative correlation with efficiency and in the long run, it has a significant positive relationship because initially digital transformation cost for operational and risk management innovation decreases the profit efficiency, but afterwards it increases the profit efficiency.

The COVID-19 crisis has emphasized the importance of digital transformation of SMEs and has served as an accelerator. Digital transformation empowers SMEs to rethink the way they make decisions and apply technology in meaningful and sustainable ways. The purpose of this study is to explore the role of digital transformation, fostered by COVID-19, and its potential contribution to the sustainability of SMEs. This paper examines a new conceptual framework designed on resource-based theory perspectives by using a survey data of 246 SMEs in Latvia and employing mediation analysis. The main findings of the study are that digital orientation and digital capability have direct positive effects on digital transformation; higher levels of digital orientation and capability, mediated by digital transformation, lead to higher revenue; as well as a more sophisticated business model in the case of digital orientation. Even if we cannot confirm that higher digital capability, mediated by digital transformation, leads to a more sophisticated business model, we found statistically significant direct effects from digital capability to digital transformation and from digital transformation to business model. These findings can be useful for policymakers, managers and practitioners to clarify how digital orientation, digital capability intermediated through digital transformation affect sustainability of SMEs.

Proposed study aims to investigate the digital transformation of Greek small and medium enterprises (SMEs), with a particular focus on their digital maturity and the strategic and organizational factors contributing to digital transformation. The research issue of digital transformation is attracting considerable interest among academics and business practicians since COVID-19 accelerated the procedure of implementing Industry’s 4.0 principles all over global economies. Quantitative research on 147 Greek SMEs revealed most important issues on how these businesses implement digital transformation, factors accelerating or decelerating the process, barriers and expected outcomes. Research enlights how SMEs face the transition to digital business and reveals the factors that can facilitate the whole process. Results can be valuable for stakeholders enabled to digital transformation process from both business and academic point of view, while there exist aspects that can contribute to policy makers / motivation developers in state’s level as well.

With the advancement of the economy and society, policymakers acknowledge the significance of improving rural households' well-being as a crucial factor in promoting sustainable economic and social development. Based on the matching data of China Household Finance Survey and Digital Rural County Index, this study empirically examines the effect and mechanisms of digital village construction on subjective well-being of rural households. The results revealed that digital village construction has a significant improvement in their subjective well-being. The impact of digital village construction is particularly significant in rural areas located in the western regions of China, as well as among households possessing higher levels of human capital. The process through which digital village construction enhances the subjective well-being of rural households involves the augmentation of household income, the promotion of non-farm employment opportunities, and the enhancement of rural governance. This study provides robust micro-empirical evidence highlighting the positive welfare effects of digital rural construction. This study provides insights into the digital village construction within the happiness economy framework, offering a new perspective. The imperative to strengthen rural digital infrastructure and improve farmers' proficiency in modern information skills is a strategic policy aimed at enhancing well-being of rural households.

A Digital Twin can be understood as a representation of a real asset, in other words, a virtual replica of a physical object, process or even a system. As virtual models, they can integrate with all the latest technologies, such as the Internet of Things (IoT), Cloud Computing and Artificial Intelligence (AI), among others. Digital twins have applications in a wide range of sectors, from manufacturing and engineering to healthcare. They have been used in managing healthcare facilities , streamlining care processes, personalizing treatments , and enhancing patient recovery . By analyzing data from sensors and other sources, healthcare professionals can develop virtual models of patients, organs, and human systems, experimenting with various strategies to identify the most effective approach. This approach can lead to more targeted and efficient therapies while reducing the risk of collateral effects . Digital twin technology can also be used to generate a virtual replica of a hospital to review operational strategies, capabilities, personnel, and care models to identify areas for improvement, predict future challenges, and optimize organizational strategies. The potential impact of this tool on our society and its well-being is quite significant. This article explores how digital twins are being used in healthcare. The article also introduces some discussions on the impact of this use and future research and technology development projections for the use of digital twins in the healthcare sector.

Extending from the current Elaboration likelihood model scholarship, this article proposes a framework for applying ELM to cricket bat purchase. Professional cricketers or fans require comprehensive and adequate pieces of information about cricket bat through the Internet. Buyers simultaneously encourage internet reviews for product impressions, and they experience meaningful associations. ELM and the Internet exemplify the cricket bat buying process by engaging buyers with product specification and create a meaningful relationship between buyers and sellers. At the same time, buyers feel empowered to choose a product of their choice. Describing the Elaboration likelihood model, we have facilitated an approach for cricket bats buying. This article has explored how ELM through the Internet can encourage buyers to be informative about cricket bats while silencing retailers' voices and visions into a unique buyer-seller relationship.

Currently, large volumes of data are being collected on farms using multimodal sensor technol-ogies. These sensors measure the activity, housing conditions, feed intake, and health of farm animals. With traditional methods, the data from farm animals and their environment can be collected intermittently. However, with the advancement of wearable and non-invasive sensing tools, these measurements can be made in real-time for continuous quantitation relating to clinical biomarkers, resilience indicators, and behavioral predictors. The digital phenotyping of humans has drawn enormous attention recently due to its medical significance, but much research is still needed for the digital phenotyping of farm animals. Implications from human studies show great promise for the application of digital phenotyping technology in modern livestock farming, but these technologies must be directly applied to animals to understand their true capacities. Due to species-specific traits, certain technologies required to assess phenotypes need to be tailored ef-ficiently and accurately. Such devices allow for the collection of information that can better inform farmers on aspects of animal welfare and production that need improvement. By explicitly ad-dressing farm animals’ individual physiological and mental (affective states) needs, sensor-based digital phenotyping has the potential to serve as an effective intervention platform. Future re-search is warranted for the design and development of digital phenotyping technology platforms that create shared data standards, metrics, and repositories.

Livestock contribute towards household food security in rural communities through income generation and provision of animal-source food. However, livestock system are fragile for example, in Zimbabwe, communities face challenges such as fewer buyers, poor infrastructure, and information asymmetry when selling livestock. Emerging digital platforms promise opportunities to address these challenge but only anecdotal evidence exist. This paper uses data from Beitbridge to explore the potential of digital platforms to revitalise the livestock auction system. Study findings show that digital platforms are designed with affordances which can help overcome challenges within the livestock system. However, these digital platforms are also fraught with hidden complexities such as power dynamics. Thus, despite digital platforms’ affordances, their design inherently extends beyond technical functions. Therefore, there is an urgent need for discussions exploring the contrast between affordances and complexities to enable target users to make informed decisions on the adoption and use of digital platforms.

Organisations need dynamic capabilities in the ongoing digital transformation to reconfigure knowledge and learning. There is a need to define new concepts and explain mechanisms of relevant factors to build dynamic capabilities. Especially organisations acting in healthcare are caught in a dilemmatic situation. New, digital processes and business models are promising benefits for cost-containment measures and improved patient-centric care, offering digital services. However, investments are needed to benefit. The important question is: how can individual actors in healthcare be motivated to engage in this transformational process to build and reconfigure relevant competences and establish new learning routines? Founded on the essence of existing literature, we assume sustained learning as a relevant dynamic capability to seize and sense competences and reconfigure human capital. This paper answers the call for deeper investigations into the mechanisms in new digitally transformed environments and sectors with less focus on performance and competitive advantages, like public administration or the healthcare sector. Based on previous research, validated in qualitative interviews and quantitative testing, we define the new construct of sustained learning with its subdimensions. By providing measures, we build the ground for further quantitative research.

Data integrity and security are among the most essential things in this digital era performance. Digital certificates can be one solution to this problem. This research will develop the architecture of digital certificate verification and validation using blockchain. The blockchain concept for digital certificates uses three stages: requirements planning, workshop design, and implementation. Digital certificate files will be tested based on a scenario in which there could be any changes to those files, such as compressing files, changing data of files, inserting images in the file, and rotating files. This system architecture will detect any changes that could occur to the digital certificate file by using a digital signature, Keccak256 hash algorithm, and blockchain. This research shows that change detection accuracy for digital certificate files is 100%. However, there is a digital signature nature that could reduce the accuracy of change detection, and several solutions can be resolved. The average time to generate a signature using blockchain technology is 2.11 seconds, faster than 3.23 seconds when it does not use blockchain. The average time to validate a signature is 2.11 seconds without using blockchain, which is reduced to 0.22 seconds using blockchain technology. This research concludes that the architecture for digital certificate verification and validation using blockchain technology has successfully improved the security of digital certificates. Testing showed that even minor changes to a digital certificate could affect the signature, ensuring the certificate's integrity. For further research, evaluating the performance of various hash algorithms within the blockchain network is recommended.

This study aims to explore significant present and future trends in accounting and corporate sustainability by examining publications from the Web of Science database spanning from 2010 to 2023. With a particular focus on research related to the digital business environment, the study employs bibliometric analysis grounded in the resource-based view theory to investigate the evolution of auditing and digital accounting research. Utilizing the VOSviewer tool, the study analyzes keyword relationships and their geographical distribution based on a comprehensive examination of 700 publications from the Web of Science. The findings highlight the transformative impact of auditing and digital accounting on business operations in response to rapid digitization. Key clusters identified shed light on digital transformation and the intersection between information technology and corporate management, revealing the evolving research landscape. The study discusses both practical and theoretical implications arising from these findings.

In the face of geopolitical threats in Artsakh, the preservation of Armenia's epigraphic heritage has become a mission of both historical and cultural urgency. This project delves deep into Armenian inscriptions, employing advanced digital tools and strategies like the Oxygen text editor and EpiDoc guidelines to efficiently catalogue, analyze, and present these historical treasures. Amidst the adversities posed by Azerbaijan's stance towards Armenian heritage in Artsakh, the digital documentation and preservation of these inscriptions have become a beacon of cultural resilience. The XML-based database ensures consistent data, promoting scholarly research and broadening accessibility. Integrating the Grabar Armenian dictionary addressed linguistic challenges, enhancing data accuracy. This initiative goes beyond merely preserving stone and text; it is a testament to the stories, hopes, and enduring spirit of the Armenian people in the face of external threats. Through a harmonious blend of technology and traditional knowledge, the project stands as a vanguard in the fight to ensure that Armenia's rich epigraphic legacy and the narratives they enshrine remain undiminished for future generations.

This study aimed to assess the diagnostic accuracy of a mobile application by comparing its diagnoses to those of Orofacial Pain and Oral Medicine specialists and further imaging results (TMJ CBCT and MRI) in 500 patients with temporomandibular disorder (TMD). The research focused on three diagnostic categories: initial specialist diagnoses, final diagnoses after imaging, and the mobile app's diagnoses. The concordance rate, sensitivity, specificity, and positive predictive value of the diagnoses were examined, with further imaging serving as the gold standard. The mobile app demonstrated a high concordance rate compared to both final (0.93) and initial specialist diagnoses (0.86). Sensitivity, specificity, and positive predictive values also indicated strong reliability, affirming the app's diagnostic validity. Although the concordance rate was slightly lower when comparing the app's diagnoses to imaging results (CBCT and MRI), specialist diagnoses yielded similar results. The study suggests that user-friendly diagnostic mobile applications, based on the Diagnostic Criteria for Temporomandibular Disorders, could enhance the clinical management of TMD. Given the reliability of mobile applications for diagnostic purposes, their wider implementation could facilitate the provision of appropriate and timely treatments for patients with TMD.

"Metaverse" as a term came to the fore in 2021 when Facebook rebranded its corporate identity to Meta, and signaled its intention to invest at least $10 billion in developing the concepts and related products that year. However, there is still little consensus in defining what constitutes the metaverse, although there is a widespread, though not universal, agreement that it will bring a wide range of benefits across society. More specifically, the advent, and continuing evolution, of the metaverse has strategic and operational implications for, and impacts on, industry and business at large. Adopting an inductive, interpretivist approach, this exploratory research article presents case examples of the guidance on the responsible development of the metaverse provided by two IT business services companies. The article identifies the major risks and responsibilities associated with the metaverse and assesses how companies might address these responsibilities. Very little research has been published in this area and this article attempts to make a small contribution to filling this gap in the literature. The article finds that responsibilities are largely in line with those currently associated with corporate digital responsibility, and concludes that the strategic impact and extent of regulatory change will depend on the nature of the metaverse that materialises in the forthcoming decade.

The advent of the digital age has brought about significant transformations in the entertainment industry, challenging traditional paradigms and redefining the ways in which content is created, distributed, and consumed. This research paper critically reviews the paradigm shift occurring in the entertainment industry, focusing on the implications of digital technologies, the rise of online platforms, changing consumer behavior, and the impact on various stakeholders. By analyzing relevant literature, industry reports, and case studies, this paper aims to comprehensively understand the challenges and opportunities presented by the digital age and assess its impact on the entertainment industry.

Digital transformation of companies is often referred to as a future track and a strategic path towards ensuring the survival and sustainability of companies. In this paper, we aim to outline this transformation process in Tunisian companies and identify its driving factors and finally explain its key success factors. To this end, we examine a sample of 70 companies operating in all economic sectors. The results indicate that such a digital strategy has a significant and a positive effect on the success of digital transformation of companies. Leadership has an effect at a low level of digital maturity. On the other hand, corporate culture does not have a significant effect on digital transformation. These results contribute to explaining this emerging phenomenon by focusing on the driving factors as well as the factors that contribute to its success.

This paper provides an overview of the current state-of-the-art digital twin and digital thread technology in industrial operations. Both are transformational technologies that have the advantage of improving the efficiency of current design and manufacturing. Digital twin is an important element of the Industry 4.0 digitalization process; however, the huge amount of data that are generated and collected by digital twin offer challenges in handling, processing and storage. The paper aims to report on the development of a new framework that combines the digital twin and digital thread for better data management in order to drive innovation, improve the production process and performance, and to ensure continuity and traceability of information. The digital twin/thread framework incorporated behavior simulation and physical control components, in which these two components rely on the connectivity between the twin and thread for information flow and exchange to drive innovation. The twin/thread framework encompasses specifications that include organizational architecture layout, security, user access, cloud computing set-up, and hardware and software requirements. It is envisaged that the framework will be applicable to enhancing optimization of operational processes and traceability of information in the physical world, especially in Industry Shipyard 4.0.

Background: Over the past decade, the use of digital tools has grown and research evidence suggests that traditional media and new media offer both benefits and health risks for young children. The abilities to understand and use language represent two of the most important competencies developed during the first 3 years of life through the interaction of the child with people, objects, events, and other environmental factors. The main goal of our study is to evaluate the relationship between digital devices use and language abilities in children between 8-36 month, considering also the influence of several variables. Materials and Methods: We conducted a cross-sectional observational study on 260 healthy children (140 males = 54%) aged between 8-36 months (mean=23.5±7.18 months). All the parents completed a self-report questionnaire investigating the use of digital devices by their children, and a standardized questionnaire for the assessment of language skills (MacArthur). Multiple linear regression was used to evaluate the relationship between different variables. Subsequent moderation analysis were performed to verify the influence of other factors. Results: W found a statistically significant negative correlation between the total daily time of exposure to digital devices and the Actions and Gestures Quotient (ß=-0.397) in children between 8-17 months, and between the total daily time of exposure to digital devices and Language Quotient (ß=-0.224) in children between 18-36 months. Sex, level of education/job of parents, modality of use/content of digital device do not significantly affect these relationships. Conclusion: In our study we found that a longer time of exposure to digital devices was related to lower mimic-gestural skills in children from 8-17 months and to lower language skills in children between 18-36 months, regardless of age, sex, socio-economic status, content and modality of use. Further studies are needed to confirm and better understand this relationship, but parents and pediatricians are advised to limit the use of digital devices by children and encourage the social interaction to support the learning of language and communication skills in this age group.

Globally, life expectancy has been increasing, with South Korea reaching an average of 85.6 years. Therethrough, ‘being healthy’ is essential for a high quality of life, and interest in health and disease prevention grew significantly after the COVID-19 pandemic. The pandemic boosted digital health technology adoption, and emphasizing the need for tailored health strategies based on age group. KIHASA conducted the study of digital confidence and health management methods involving the use of digital devices, and it examines differences in digital device use and confidence between 359 young adults (20–39Y) and 641 middle-aged adults (40–69Y). Respondents were asked about their use of digital health tools, such as wearable devices and mobile apps and confidence in using digital systems and managing health via digital tools was assessed using a five-point Likert scale. We an-alyzed the results, and it indicated that while young adults have lower rates of using digital devices for health care, they exhibit higher confidence in using such devices. In contrast, middle-aged adults, despite having lower confidence, report higher usage of digital devices for health care purposes. This study explored differences in digital confidence and health care usage between age group.

Digital competence is one of the 8 key competences for life-long learning developed by the European Commission, and is requisite for personal fulfilment and development, active citizenship, social inclusion and employment in the knowledge society. To accompany young learners in the development of the competence, and to guarantee optimal implementation of ICTs, it is necessary that teachers are, in turn, literate. We had 43 Secondary School teachers in initial training to assess their own level of competence in the 21 sub-competences in 5 areas identified by the DIGCOMP project, using the rubrics provided in the Common Framework for Digital Competence of Teachers (Spanish Ministry of Education). Overall, pre-service teachers' conceptions about their level of Digital Competence was low (Initial). Students scored highest in Information, which refers mostly to the operations they performed while being students. Secondly, in Safety and Communication, excluding Protection of Digital Data and Preservation of the Digital Identity. Lowest values were achieved in Content Creation and Problem Solving, the dimensions most closely related with the inclusion of ICTs to transform teaching-learning processes. The knowledge or skills they exhibit are largely self-taught and, so, we perceive an urgent need to purposefully incorporate relational and didactic aspects of ICT integration.

This paper explores in depth the mechanism of enterprise digital capability effects in supply chain digital development by reconstructing the supply chain cooperation capabilities (digital diffusion capability and digital collaborative capability). We use the questionnaire data covering 272 Chi-nese manufacturing enterprises and apply a structural equation model to test the hypothesis. The results show that enterprise digital capability does not directly have a significant impact on sup-ply chain digitalization, and the supply chain cooperation capabilities play mediation role be-tween enterprise digital capability and supply chain digitalization. The results are robust due to we thoroughly consider the action boundary of enterprise capabilities, and verify the systematic requirements of supply chain digitalization and the high-order of enterprise digital capability. These provide a theoretical basis for enterprises to promote the digital transformation of supply chain through digital technology.

Background: The COVID-19 pandemic led to rapid growth in telemental health services and investment in digital mental health technologies. Digital mental health technologies could expand access to mental health care amid increasing provider deficit by providing tools for expedited psychiatric symptom assessment and treatment augmentation. This systematic review explores the recent evidence for the use of scalable digital tools, including virtual reality, neurofeedback training, wearables, mobile apps, digital phenotyping, and machine learning for PTSD symptom assessment, diagnosis, and treatment. Methods: A PubMed search identified studies on digital technologies with current or future potential for scalability (accessible through a small, digital device without the virtual or in-person presence of a mental health care provider)–and PTSD diagnosis, symptom assessment, or symptom treatment as the primary outcome. Thirty-five studies inform this review. Results: Virtual reality exposure therapy is efficacious for combat-related PTSD treatment. Conclusions of studies investigating apps and neurofeedback training are limited by low sample size and methodological heterogeneity. Machine learning models demonstrate capability in detecting PTSD symptoms via passively collected data from smartphones, wearables, and actively collected data from patient speech, writing, and videos, but standardization of data collection and modeling are needed before application to clinical settings. Conclusions: Advancements in scalable digital tools could address barriers in healthcare access and improve patient engagement by providing asynchronous assessment and treatment augmentation. Future research utilizing diverse patient populations in standardized controlled trials is needed to determine evidence-based protocols for implementation.

Facility Management (FM) has increasingly focused on using Building Information Modeling (BIM) in large-scale development projects. To successfully integrate BIM in the FM sector, cooperation among different participants involved in various project stages must be improved. The objective of this digital revolution in FM is to enhance the efficacy of planning, constructing, and managing assets, benefiting all parties involved. However, the utilization of BIM in FM is limited due to factors such as incomplete owner understanding, insufficient data accessibility, and stakeholders' unfamiliarity with BIM procedures and standardization. Although the FM industry acknowledges BIM's significance, achieving successful implementation remains challenging. Facility managers lack a clear understanding of BIM's benefits in expediting operations and cost efficiency and the necessary skills for efficient utilization. To address this constraint, it is essential to develop an Employee’s Information Requirement (EIR) at the outset of a project, serving as a strategic plan and providing a comprehensive vision for all parties involved, particularly large-scale projects. Two essential technologies that facilitate the transition towards building operations are BIM and the Internet of Things (IoT). Incorporating these technologies is crucial to reducing time, expenses, and operational challenges throughout any project. The aim of this research is to create a Digital-Trio workflow, as a new expression, by providing a methodology for using facility management with BIM through the integration of EIR and IoT, maximizes the benefit of stakeholders strategically and operationally. It also explores how the preparation of the EIR by communicating with all parties will definitely improve the design process, sustainability, efficiency, cost, and time for any project, especially megaprojects.

In recent years, the digital economy has played an increasingly important role in enhancing productivity, fostering growth, and facilitating the emergence of digital banking. With the widespread adoption of digital financial services for financial inclusion, the banking sector is experiencing a demand for digital transformation. It is important to note that despite the many advantages of this change, it also disrupts the familiar banking experience that customers have grown to expect, as well as introducing potential risks to maintaining customer protection at previous levels. Many critics have raised concerns regarding customer protection and potential exposure to various risks that may arise from digital financial services, which may result in both financial and non-financial losses. These risks can impact customer retention as dissatisfied customers may switch to alternative service providers. Additionally, reputation can be affected since merely offering digital financial services may not sufficiently safeguard customers. To remain competitive, financial institutions must deliver a secure experience that aligns with customer expectations while considering economic factors and societal needs. This is why it is essential to comprehend the severity of the risk factors that influence the protection of customers in the realm of digitalized banking services and products. In this study, five factors have been identified that influence customer protection when using digital financial services in Pakistan. Based on the analysis conducted using SmartPLS, it appears that all the factors proposed in this study have a significant and positive impact on the protection of customers. In particular, the information provided remains of paramount importance when it comes to determining the level of protection that a customer is entitled to within digital financial services, followed by responsiveness, privacy, authentication, and encryption mechanisms. Due to these findings, the implementation of enhanced information security management principles becomes imperative for the development and progress of the Pakistani digital banking industry.

Music cultural heritage, as an important component of cultural heritage, possesses significant cultural value and inheritance significance. With the development of society and the passage of time, these precious traditional music cultural heritages inevitably face the dilemma of gradual depletion or even disappearance. In the digital age, effectively protecting and inheriting these music cultural heritages has become an urgent problem to be addressed. Therefore, this paper proposes an application method based on digital twin technology, exploring how to protect and inherit music cultural heritages through digital twin technology. By leveraging digital twin technology, a virtual museum dedicated to showcasing the richness and historical connotations of music cultures is created, preserving and simulating the soundscapes of historical music eras. Through the integration of audio archives, 3D modeling, and interactive displays, users can immerse themselves in the experience of historical music in the digital space. This paper evaluates the feasibility and cultural preservation value of this digital music history museum through the creation of music digital twin technology instances and user survey feedback, and discusses the prospects of digital twins in the field of music cultural heritage.

In our digital era, digital platforms become an unprecedented opportunities for manufacturing enterprises to leverage their business strategy. This study investigates how manufacturing enterprises can enhance organizational duality through digital platforms. Specifically, this study examines the effect of digital platforms and capability reconfiguration on entrepreneurial organizational duality. The study also examines how network digital atmosphere moderates this relationship. Based on analysis of 286 manufacturing enterprises undergoing digital transformation, the results indicate that digital platforms positively affect both organizational duality and the capability reconfiguration. The results indicate that digital platforms have a positive indirect effect on organizational duality via evolutionary capability reconfiguration and substitutional capability reconfiguration, respectively. The study also shows that network digital atmosphere moderate this effect.These findings contribute theoretically to the research on digital platforms and manufacturing enterprises while also providing important managerial implications for policymakers and manufacturing enterprises to help firms implement digital strategies.

Abstract: Rural digital governance is an inevitable requirement to improve the efficiency of rural governance, and is also an important means to realize the modernization of rural governance. In the context of the digital rural development strategy, the index measurement system of rural digital governance level is built around five key governance areas of "digital economy, digital ecology, digital culture, digital people's livelihood, and digital government affairs". The entropy weight Topsis model is used to measure and evaluate the level of rural digital governance in 31 provinces in China in 2021. The results show that there is a large gap in the level of digital governance in China's counties and villages, and the level of each region presents a decreasing spatial distribution from "east - middle - west". In terms of digital economy, the eastern region has a high score and good development, while the central and western regions have poor development. In terms of digital ecology, only the eastern region is higher than the national average; In terms of digital culture, only the central region is higher than the national average; In terms of digital livelihood and digital government, the central and eastern regions are slightly higher than the national average; The top three provinces in overall scores are Zhejiang, Guangdong and Jiangsu.

The sudden outbreak of the COVID-19 pandemic challenged education systems worldwide to quickly pivot their teaching-learning processes from in-person to virtual modes in order to control the spread of the virus. In a short period of time, teachers were forced to adopt new remote teaching methods to ensure the continuation of education. This paper examines how teachers in Pakistan leveraged mobile technology as an alternative teaching strategy to provide access to education during these unprecedented times. Through in-depth individual interviews with selected teachers, the study explores the potential of mobile technology to transform traditional teaching methods into interactive learning environments. The findings highlight the importance of embracing new pedagogical possibilities offered by mobile technology and the need for effective teacher professional development in the post-pandemic era. The study offers valuable insights into how mobile technology can be effectively utilized in education, even in the most challenging circumstances.

COVID-19 poses a significant burden to healthcare systems. Healthcare organisations with a better health innovation infrastructure have faced a reduced burden and achieved success in curbing COVID-19. In Saudi Arabia, digital technologies have played a vital role in fighting SARS-CoV-2 transmission. In this paper, we aimed to summarise the experience of optimising digital health technologies in Saudi Arabia as well as discuss capabilities and opportunities during and beyond the COVID-19 pandemic. A literature review was conducted up to September 2021 to retrieve peer-reviewed articles that critique the use of digital health technology platforms (DHTPs) in Saudi Arabia during the COVID-19 outbreak. A small but significant body of literature examined the digital response to the COVID-19 pandemic in Saudi Arabia. Health officials succeeded in optimising and maintaining a strategy to mitigate the spread of the virus via different digital technologies, such as mobile health applications, artificial intelligence, and machine learning. The quick digital response in Saudi Arabia was facilitated by governmental support and considering users and technology determinants. Future research must concentrate on establishing and updating the guidelines for using DHTPs.

The article considers the peculiarities of practical implementation of the narrative-digital approach in the process of studying disciplines of literary cycle at philological faculties. The authors emphasize that the key to the effective transition to distance and combined forms of studying is creation of a productive national information and didactic space, with involvement of IT and appropriate level of training of all participants in the pedagogical process. Under these conditions, the application of the narrative-digital approach is promising, which in literary education of philologists is based on interdisciplinary interactive basis, which combines possibilities of narrative methods with computer technology. The integration of digital technologies into philological field causes a number of methodological difficulties, requires all subjects of educational activity to develop digital skills that are not related to professional humanities knowledge, but meet the requirements of trained competitive and highly qualified specialists. The authors conducted a sociological study on the readiness of students of philological specialties of pedagogical universities to implement the narrative-digital approach to educational practice. Research provides optimal software that allows you to implement this approach in practice, offers a selection of didactic tasks, substantiates feasibility of their use in classes of different types.

In this paper we will present a simplified approach for extracting the ground level – a digital terrain model (DTM) – from the surface provided in a digital surface model (DSM). Most existing algorithms try to find the ground values in a digital surface model. Our approach works the opposite direction by detecting probable above ground areas. The main advantage of our approach is the possibility to use it with incomplete DSMs containing much no data values which can be e.g. occlusions in the calculated DSM. A smoothing or filling of such original derived DSMs will destroy much information which is very useful for deriving a ground surface from the DSM. Since the presented approach needs steep edges to detect potential high objects it will fail on smoothed and filled DSMs. After presenting the algorithm it will be applied to a test area in Salzburg and compared to a terrain model freely available from the Austrian government.

The central aim of this paper is to present the Green Web Meter software which is designed to support the measurement of digital sustainability performance of websites and web apps, as well as providing sound based analytic tools for improving their overall quality. We analyzed scientific literature and specifically selected three quality assessment models (E-S Qual, Sitequal, Webqual 4.0) which we used as a starting point for identifying the most crucial aspects for the monitoring activities. A consistent set of Key Performance Indicators (KPIs) suitable for automated tracking has been provided. We finally developed model-based software able to deliver solutions for real-time website performance analysis and reports. We structured the model to offer accurate references for digital sustainability reporting by aggregating the KPIs into an Environmental, Social, and Governance (ESG) framework and computing a comprehensive score for its pillars.

The digital transition processes have demonstrated an enormous capacity to develop and implement sustainable solutions, which allow solving several problems such as poverty, high rates of species extinction and lack of equal opportunity. However, little attention is paid to the connection between the digital transition and sustainability. Thus, a systematic review of the bibliometric literature was developed to fill this knowledge gap and demonstrate the potential contributions of the digital transition to environmental, economic and social sustainability aspects. In environmental sustainability, the digital transition involves the application of technologies such as AI, big data analytics, IoT, and mobile technologies that are used to develop and implement sustainability solutions in areas such as sustainable urban development, sustainable production and pollution control. In economic sustainability, emerging digital technologies can drive transformation into the more sustainable circular economy, the digital sharing economy, and establish sustainable manufacturing and infrastructure design. In the digital transition to social sustainability, the studies analyzed demonstrate the need for multidimensional policy perspectives to address the current digital divide. For effective management of the digital transition that achieves sustainability goals, the study discusses alternative approaches that include innovation through experimentation, and dynamic and sustainable advantages achievable through temporary benefits.

In this work we offer a broad overview of the combination of digital communication, education and society and show the link between learning with digital and awakening to the future. We trace the effects of digital communication acquired during postgraduate training at the Universidade Aberta of Portugal by professionals from African Portuguese-speaking countries. From a methodological point of view, the study identifies former postgraduate students at the Universidade Aberta (Public University of Higher Education) over the last five years who were given a comprehensive questionnaire aimed at finding out how the training they underwent contributed to gauging their current levels of application of digital communication in their current profession. We found that digital communication in learning and its diversification acts as a lever for personal and professional development following the acquisition of academic knowledge.

This study measured secondary students’ digital literacy using a digital game-based assessment system that was designed and developed based on the Evidence-Centered Game Design (ECGD) approach. A total of 188 secondary students constituted the valid samples in this study. Fine-grained behavioral data generated from students’ gameplay processes were collected and recorded with the assessment system. The Delphi method was used to extract feature variables related to digital literacy from the process data, and the Analytic Hierarchy Process (AHP) method was used to construct the measurement model. The assessment results of the ECGD-based assessment had a high correlation with standardized test scores, which have been shown to be reliable and valid in prior large-scale assessment studies.

The increase in online orders following the COVID-19 pandemic has heightened consumer ex-pectations regarding prompt deliveries. However, this phenomenon has subsequently triggered a substantial increase in the number of vehicles navigating through urban areas, highly affecting the overall quality of life within cities. Capitalizing on the complexities posed by urban logistics, this paper proposes an innovative digital business model for logistics services. In this context, we introduce “Urban Logistics as a Service (ULaaS), platform”, a concept rooted in the principals of circular economy and harnessed through the application of the Canvas methodology. The con-ceptual framework outlines the ULaaS ecosystem and explores potential user-functionality com-binations. The proposed platform serves as both an on-demand service provider and a control hub for stakeholders such as traffic authorities, policymakers, logistics providers, carriers, and shippers. This platform streamlines citywide logistics to enhance movement efficiency, ease congestion, and reduce emissions. The ULaaS concept was validated through analysis of data collected from interviews in the unique social context of Campinas City, Brazil. The key value-generating mod-ules within the ULaaS ecosystem include parking reservations, shared warehousing, e-commerce deliveries, and comprehensive logistics solutions. However, implementing Urban Logistics as a Service has challenges. These include defining public and private sector roles, creating effective pricing models, and fairly distributing respon-sibilities among service providers. The paper also elucidates various monetization models and required investments, crucial for fostering potential private sector involvement.

In article 16 of the United Nations Convention (UN), or the United Nations Convention on the Rights of the Child (UNCRC), which is usually called the Convention on the Rights of the Child, outlines the right of every child to privacy and protection against violations of privacy related to the home. , family, communication, and their good name. Children's privacy, especially when it comes to personal data, requires strict boundaries. Current digital developments influence children's parenting and thinking patterns with potential negative impacts. Children can be targets of abuse in the digital world. Children's personal data is often used until they become independent. This research, using normative legal methods, aims to analyze regulations related to the protection of children's personal data in the digital era. Therefore, updates are needed in the laws and regulations governing children's personal data to safeguard their privacy rights in accordance with the UNCRC.

3D printing technology has brought about a paradigm shift in the delivery of clinical care in medicine and dentistry. There are several different 3D printing technologies, which, along with different printable materials with unique biomechanical properties, allows for a wide range of applications for 3D printing in dentistry. The clinical use of 3D printing has created versatile applications which streamline our digital workflow. Technological advancements have also paved the way for the integration of new dental materials in dentistry. This paper provides an overview of the mechanisms of 3D printing, the dental materials relevant to each mechanism and the possible applications of these materials within different areas of dentistry. Understanding the existing spectrum of 3D printing applications in dentistry will serve to further expand its use in the dental field.

Digital transformation can become a complex process when workers have insufficient skills, which makes training in the digital field essential. Herein, we intended to relate digital literacy perceived by workers with their training needs for the Portuguese public sector context. Additionally, based in the Human capital theory, we also investigate which professional/demographic characteristics increase training propensity in digital fields. Through an online questionnaire, a dataset with information on 573 workers was obtained. Data analysis was made by using a probabilistic regression model and additional statistical techniques. The results revealed that workers with higher levels of education and higher professional skills have higher probability of participating in training in the digital field. On average, workers reveal low levels of digital knowledge and low participation in training in the digital fields, but the majority present a willingness to participate in future training sessions, especially in the fields of Dataset management, Cybersecurity and Communication systems. This study provides information on training in the digital field of workers in the public sector, which is essential for public organizations to better prepare for digital transformation. Additionally, it contributes to a very recent literature on digital learning, and it can be extended to other contexts.

This qualitative study explores the implementation and conformation process of digital devices in teaching and learning before, during, and after the COVID-19 pandemic in Nepal. Using Rogers' Diffusion of Innovation Theory as a framework, the study examines the adoption and adaptation of digital devices by in-service secondary mathematics teachers (n=62) and their perceptions and preferences towards instructional modality. The findings suggest that despite the increased reliance on digital devices during the pandemic, there is a less likelihood of using them in face-to-face classrooms in developing countries like Nepal. The adoption of online learning has not yet reached the confirmation stage, even after the onset of the COVID-19 pandemic. Prior to the pandemic, online learning was not widely implemented or confirmed by teachers in developing countries societies. The study also provides important insights into the challenges and opportunities of using digital devices in post-COVID-19 classrooms, and its implications for policymakers and educators in Nepal.

The devastating COVID-19 pandemic forced academia to go virtual. Educational institutions around the world have stressed online learning programs in the aftermath of the pandemic. However, because of insufficient access to ICT, a substantial number of students failed to harness the opportunity of online learning. This study explores the latent digital divide exhibited during the COVID-19 pandemic while online learning activities are emphasized among Bangladeshi students. It also investigates the digital divide exposure and the significant underlying drivers of the divide. A cross-sectional survey was employed to collect quantitative data mixed with open-ended questions to collect qualitative information from the student community. The findings revealed that despite the majority of students have physical access to ICT but only 32.5% of students could attend online classes seamlessly, 34.1% of the students reported the data prices as the critical barrier, and 39.8% of students identified the poor network infrastructure is the significant barrier for them to participate in online learning activities. Although most students possess physical access to the device and the Internet, they face the first-level digital divide due to the quality of access and maintaining subscriptions. Consequently, they fail to take advantage of physical access, resulting in the third-level digital divide (Utility Gap) and submerging them into a digital divide cycle. This paper aimed to explore the underlying issues of the digital divide among Bangladeshi students to assist relevant stakeholders (e.g., the Bangladesh government, Educational Institutions, Researchers) in providing the necessary insights and theoretical understanding to arrange adequate support for students to undertake conducive online learning activities.

Without impacting the dental sciences, breakthroughs in technology and applications could not be accomplished. In the advancement of technology and information technology, dentistry and dental materials have been fully active, so much so that they have revolutionized dental techniques. Material & methods; We want to produce the first series of articles in this review on the use of digital techniques and software, such as Smile Concept Digital. The goal is to gather all the findings on the use of this program and to highlight the fields of use. The analysis included forty-nine articles, the latter discussing the use of Digital Smile Design and the area of use. The research aims to classify the dental fields are using "digitization." Change is constant in this field and will be increasing Interest in dentistry by recommending the speed and reliability of outcomes for care planning. Conclusion: As seen in the study, the digital workflow facilitates recovery that is reliable both from an aesthetic and functional point of view. The current area of use of Digital Smile Design techniques in the different branches of medicine and dentistry as well as knowledge have emerged from this research

Purpose- This study seeks to investigate the collaboration between Digitalization and traditional manufacturing industry and investigate, how digitalized management brings new chances and challenges of management. Design/methodology/approach – The author designed a content analytical study researching the role of digitalization in traditional manufacturing industries. The article presents a selective but systematical review of recent digitalization trend and digital twin to be applied for innovative management in Industry 4.0 era. Findings– Digitalization is highly correlated with traditional manufactory in Industry 4.0 era. The study brings a new outlook on the next wave of Digitalization and review of associated challenges and opportunities for management and innovation in traditional manufacturing industries. Research limitations/implications – The research focuses on two branches of traditional industries only: machine tools building and metalworking industries. Future research needs to examine other traditional industries. The research is limited to 2 high related traditional manufacturing industries, machine tools and metalworking industry. Practical implications – The study and application of digitalization should be highly recommended and launched in traditional manufacturing industries. Universities, institutes and vocational schools should update, optimize their courses systems according to prediction of future industry. Originality/value – The paper enhances understanding about the collaboration between digitalization and traditional manufacturing industry. This paper analyzes an important issue the digitalization serves traditional industries. It is unique in its broad analysis of the related terms – Digitalization, Machines 4.0, Industry 4.0 and innovative management in Industry 4.0 era.

Digital twin technology is already improving efficiencies and reducing costs across multiple industries and sectors. As the earliest adopters, space technology and manufacturing sectors have made the most sophisticated gains with automobile and natural resource extraction industries following close behind with recent investments in digital twin technology. The application of digital twins within the livestock farming sector is the next frontier. The possibilities that this technology may fuel are nearly endless as digital twins can be used to improve large-scale precision livestock farming practices, machinery and equipment usage, and the health and well-being of a wide variety of farm animals. Currently, many pioneers of digital twins in livestock farming are already applying sophisticated AI technology to monitor both animals and environment around the clock, which leads to a better understanding of animal behavior and distress, disease control and prevention, and smarter business decisions for the farmer. Mental and emotional states of animals can be monitored using recognition technology that examines facial features such as ear postures and eye white regions. Used with modeling, simulation and augmented reality technologies, digital twins can help farmers build more energy-efficient housing structures, predict heat cycles for breeding, discourage negative behaviors of livestock, and potentially much more. As with all disruptive technological advances, the implementation of digital twin technology will demand a thorough cost and benefit analysis by individual farms. Digital twin application will need to overcome challenges and accept limitations that arise. However, regardless of these issues, the potential of digital twins promises to revolutionize livestock farming in the future.

The Circular Economy has been of growing significance within academic, policymaking and industry groups. Latest developments in the field of Circular Economy has led to an expansion of CE studies focused on interrogating CE as a paradigm, its relationship with sustainability and concepts and definitions of the Circular Economy. Research has also identified the significant potential of applying circular approaches to areas of the economy, including manufacturing and Industry 4.0, which, with data, is enabling latest the advances in digital technologies. This is the first review paper to integrate the fields of CE and digital technologies resulting in a framework which provides directions for policymakers and guidance for future research. To achieve this, we conduct a systematic literature review of the empirical literature related to digital technologies, industry 4.0 and circular approaches, from the point of the 9 Rs. The systematic literature review (SLR) is based on peer-reviewed articles published between 2000-2018. The findings reveal that while research on the circular economy has been on an annual rise, research on digital technologies enabled circular economy is still relatively an untouched area of research across all nine (9) circular approaches. As such this is an area rife for further research. This paper also presents illustrative charts and graphs to summarize the current trends in circular economy research in manufacturing. From this, a framework for future circular economy research for manufacturing for digital technologies is proposed.

Interactive Digital Media have become the most important pillars on which contemporary 21st century scenography is based, allowing for the use of many modern digital media as scenographic elements. With the steady development of digital arts, particularly digital animation, it has become a key role as a 21st century in presenting their theatrical visions. My own issue is the use of digital Media as an Interactive scenographic element, as evidenced by the design of several spatial environments within the framework of an idea and a dynamic scenario that interacts with the Several Scenes of the theatrical Performances and is displayed on screen walls or dropped on thematic elements, resulting in a type of interaction between them and the Scenic Design. My project includes instances of models exhibiting the link of designs to theme composition on stage, such as works utilized in plays, musical/motion drama, and event performances . The design used music synced with digital animated media designs as a scenographic element to reinforce the overall visual picture. The study paper examines a theory of my own project, in which I offer a dynamic exhibition of full-back digital settings in rhythm with the music, suited to its movement and the character of the performance, to be employed as a Scenographic element at a Proscenium Theater (12W x 10D x 7H).

The transformation of Bangladesh from a Digital Bangladesh to a Digital Bangladesh is an ambitious initiative aimed at leveraging digital technologies to drive economic growth, enhance public service delivery, and improve the quality of life for all citizens. This paper explores the strategic roadmap for achieving this vision, focusing on key priorities such as expanding digital infrastructure, promoting digital literacy and skills, fostering innovation and entrepreneurship, enhancing cybersecurity, and strengthening governance and regulatory frameworks. The transformation journey involves significant challenges and opportunities, requiring robust stakeholder engagement, comprehensive policies, and effective monitoring and evaluation mechanisms. Emerging technologies such as artificial intelligence, blockchain, the Internet of Things, and big data analytics present substantial prospects for innovation and efficiency across various sectors. Promoting digital inclusion, bridging the digital divide, and ensuring accessibility and inclusivity are crucial for ensuring that the benefits of digital transformation are widespread. Moreover, enhancing cybersecurity and data privacy is vital for protecting digital systems and maintaining public trust. The paper also highlights the importance of fostering innovation and entrepreneurship, enhancing public service delivery, and strengthening governance frameworks to support the Digital Bangladesh vision. By addressing these strategic priorities and leveraging the collective efforts of government, private sector, academia, and civil society, Bangladesh aims to create a dynamic and resilient digital economy that drives sustainable growth and development. The successful implementation of the Digital Bangladesh vision will position the nation to thrive in the global digital landscape, ensuring a digitally empowered society that benefits all citizens.

This article examines empirically the research on digital strategy, addressing its temporal evolution, sources of scientific production, countries and organizations generating knowledge, and the topics investigated. It highlights key authors and journals from 1991 to 2023, contributing to Sustainable Development Goal (SDG) 9. Methodologically, traditional bibliometric laws and computational tools (VOSviewer software) were applied for data processing. The results show an exponential increase in publications from 2005 to 2022 with a critical mass in digital strategy studies, concentrated in 11 journals and 83 authors with 2 or more publications. The main organizations leading scientific production in this field are in the USA. Finally, the primary Web of Science categories for the leading journals are Business, Management, and Psychology. The research examines the use and adoption of digital strategies in marketing, the impact of digital transformation on business models, and the challenges it poses for human resources. In addition, the challenges arising from the impact of COVID-19, the rise of artificial intelligence, and the integration of digital strategies in public administration should continue to be addressed. Finally, industrial digital transformation and the challenges of Big Data in higher education have less connection with other key concepts analyzed.

Students' ability to exhibit positive behavior towards their environment plays a major role in building a sustainable world in the future. It is important to offer students, who are the subjects of the digital age, a more interactive and customized technology-focused learning experience. This study aims to reveal how environmental education supported by digital games affects middle school students' knowledge, environmentally responsible behaviors, and levels of digital literacy for a sustainable life. The participants of the research consist of 54 students studying at the 5th grade level of secondary school. The research was conducted with a pretest-posttest control group quasi-experimental design, which is one of the quantitative research methods. In the research, environmental education based on digital games created with web 2.0 tools was carried out. Study data; It was obtained through environmental knowledge test, environmentally responsible citizen behavior scale, and digital literacy scale. Study data were analyzed with appropriate statistical analysis using a statistical program. The research results revealed that environmental education supported by digital games is effective. It was determined that students' knowledge level, environmental behavior and digital literacy scores increased. Based on the research results, it is recommended that digital games be used to achieve more qualified learning.

Businesses now formally enter the phase of "think power differentiation and gap" in response to the new economic climate. While AI, big data, empowerment via the internet, and other aspects of the digital economy help to improve technical capabilities and save operating costs, they also push businesses to innovate their strategies at a faster rate. Enterprises are strategically choosing to de-enterprise, moving from focusing on a single business functioning benefit to building an ecosystem of platform services that will give them a competitive edge. Additionally, the organization's structure is evolving continually from a vertical model to a curved working style, in order to achieve this, businesses must recognize the importance of data analysis in day-to-day management and operations, encourage the development of an organizational atmosphere that is driven by data, fully utilize digital technology, modularize areas or production links that perform related tasks, and encourage the reform of organizational structures. By streamlining the output of the product or service to the external community while also enhancing the company's financial performance model, switching from process-to result-oriented evaluation, and putting in place a customized authority and accountability framework. Replace outcome-focused evaluation with process-focused evaluation, and create a customized incentive scheme that balances power, accountability, and rewards.

In the era of rapid digitalisation, the widespread integration of digital technology into various aspects of daily life has sparked significant interest in understanding its impact on cognitive mental processes. While the emerging data suggests that its influence may be positive or negative, the depth of evidence regarding neurobiological mechanisms remains limited. This review aims to synthesise previously published studies and explore the implications of digital technology components, specifically those resembling mobile technology, internet search engines, and conversational artificial intelligence models, on cognitive functions embedded in the brain’s ability to reorganise itself, known as neuroplasticity. Despite acknowledged limitations, through an exhaustive approach, this paper intends to offer a dynamic perspective on the effects of digital media on the human brain, before the onset of addiction.

The primary objective of this current study is to conduct a comprehensive review of existing literature that discusses research on post and core restorations, covering aspects such as their composition, manufacturing methods, and clinical effectiveness. The methodology employed in this review encompasses the implementation of a well-defined search strategy, the establishment of criteria for inclusion and exclusion, and the selection of relevant studies to summarize their findings. To gather relevant literature published between 1993 and 2023, the research team conducted separate searches on PubMed, Scopus, and Embase databases. In total, 165 titles were initially retrieved from these electronic databases. By applying the predefined exclusion criteria, the researchers identified 73 articles that specifically address the conventional and computer-aided design/computer-aided manufacturing (CAD/CAM) technologies employed in post and core restorations. These restorations are frequently utilized procedures for repairing teeth that have undergone endodontic treatment and subsequently lost dental structure. The development of computerized technology for the creation of customized posts and cores has emerged as a straightforward and efficient alternative to traditional methods. The review encompasses a synthesis of papers discussing the various techniques and materials employed in constructing post and cores using CAD/CAM technology. Notably, different strategies for restoring endodontically treated teeth through CAD/CAM post and cores have been documented, revealing both direct and indirect approaches. The most mentioned materials for these restorations include zirconia, composite resin, and hybrid ceramics. While the available literature on CAD/CAM post and core procedures is somewhat limited, the review underscores the need for further research to explore the long-term outcomes and efficacy of this treatment approach.

This paper will discuss Data, Information, Knowledge, and Wisdom, which is commonly referred to as DIKW. The DIKW Pyramid Model that is often referenced in both academics and practitioner circles will be discussed and shown to be faulty on several levels, including. a lack of definitional agreement. A new DIKW framework will be proposed that focuses on what the DIKW elements do in the way humans think, not what they are by definition. Information as a replacement for wasted physical resources in goal-oriented tasks will be a central organizing point. The paper will move the DIKW discussion to the computer-based concept of Digital Twins (DTs) and its augmentation of how we can use DIKW to be more effective and efficient. This will especially be the case as we move to Intelligent Digital Twins (IDT) with Artificial Intelligence (AI).

Based on a literature review, a framework for digital organizational culture with a focus on innovation is proposed. This digital organizational culture becomes relevant today since digital transformation requires an appetite for risk and a willingness to undertake, aspects that are strengthened by an environment and atmosphere that motivate individuals to generate new ideas. The proposal begins with a diagnosis of the existing organizational culture, which allows identifying the differences between the components of the current organizational culture and the innovation-oriented digital organizational culture. Through this diagnosis, the gaps that need to be addressed to achieve a digital organizational culture with innovative characteristics are identified. In addition, specific recommendations are proposed to carry out this transformation. In the process, the assumptions underlying the current typology of the company's organizational culture are highlighted. The importance of integrating creativity, risk readiness, and entrepreneurial willingness into the digital organizational culture aimed at innovation is emphasized. These elements are essential to create an environment

Quality products are a main focus for manufacturers. Product users only determine a product is a quality product if it performs in operation to the user’s perceived standard. Product manufactures need to take a product lifecycle quality (PLQ) perspective of quality and not simply focus on manufacturing quality control, which is more accurately specification control. Manufacturing is the key phase where products take their physical form. There are increasing costs and decreasing risk of different physical quality strategies. The information provided using digital twins and virtual testing promises to be both low risk and cost and has the potential to predict what the customer will experience in operation by testing products passively with data and actively with simulation to destruction. Digital Twin Certified (DTC) is proposed as the methodology for accomplishing this. DTC will be especially important for the adoption of additive manufacturing.

The digital age has ushered in unprecedented connectivity and convenience, but it has also given rise to escalating cyber threats and privacy concerns. This study examines the intricate balance between technological advancement and personal privacy in the face of evolving cyber risks. A comprehensive literature review was conducted, analyzing peer-reviewed articles, government reports, and industry white papers from the past decade. Additionally, case studies of major data breaches and privacy violations were examined. Surveys and interviews with cybersecurity experts, policymakers, and privacy advocates were conducted to gather diverse perspectives. The research reveals a significant increase in both the frequency and sophistication of cyber-attacks, coupled with a growing public awareness of privacy issues. However, there is a notable disconnect between individuals' stated privacy concerns and their online behaviors. Regulatory efforts to protect privacy often lag behind technological advancements and cyber threats. Maintaining equilibrium between technological progress and privacy protection requires a multifaceted approach involving enhanced cybersecurity measures, updated regulations, and improved digital literacy. The study underscores the need for ongoing collaboration between government, industry, and academia to address this complex challenge.

The insurance sector has undergone a transformative shift with the emergence of Insurtech, integrating technological innovations into the industry. This review aims to provide a comprehensive overview of the impact of Insurtech on the insurance sector, focusing on the case study of Lemonade. By placing the study in the context of the broader insurance landscape, the review explores the significance and relevance of this transformation. The article analyzes Lemonade's unique business model and its departure from traditional insurance practices. Furthermore, it examines the implications of Lemonade's approach on the industry and the challenges it faces. Through this analysis, the review sheds light on how Insurtech and the transformation of the insurance sector are redefining insurance services and consumer experiences. The future implications of these trends for insurance companies, consumers, and the industry as a whole are also explored. In summary, this review provides valuable insights into the transformative power of Insurtech, emphasizing the importance of technological advancements and innovative approaches in shaping the future of the insurance sector.

A Digital marketing allows brands to disseminate information in a targeted way towards their clients and consumers, making bidirectional communication and interactions between organizations and audiences feasible. This reality not only allows companies to pass on messages about sustainability associated with processes and products with the aim of launching trends and shaping behaviour, but also allows consumers to share their experiences, needs, preferences and expectations. In this sense, the techniques used in the context of digital marketing make it possible not only to communicate products and services but also to show that brands are working to be more sustainable and to disseminate new sustainable trends that help to change consumer mindsets. This research paper employs a Systematic Literature Review with Bibliometric Analysis (SLBA) methodology to explore and synthesize data about how digital marketing can be used to promote and communicate sustainability. In this study, the results show that digital marketing strategies contribute to promoting sustainable development by encouraging sustainable consumption patterns. This scenario is possible by understanding consumer behavior, communicating key messages through the best channels and effectively evaluating green marketing campaigns on consumer attitudes and purchasing decisions.

Este artigo apresenta o processo de implementação da Hiperautomação no setor público brasileiro, especialmente no âmbito da Procuradoria Geral do Estado de Pernambuco. Devido à atual economia competitiva, a demanda por soluções inteligentes e confiáveis está aumentando. Para atender a essa necessidade, tecnologias inovadoras que abordem a complexidade inerente à transformação digital são desejáveis. Assim, as organizações públicas têm buscado aplicar a automação de processos para atender às necessidades dos cidadãos por um serviço mais eficiente e eficaz. No entanto, podemos observar que a automação pura e direta é apenas parte do processo de transformação. Algumas das razões que explicam a necessidade de ir além da automação de processos e alcançar a hiperautomação é a abundância de dados de várias fontes e tipos. Tudo deve estar dentro dos padrões legais, ressaltando que toda tecnologia deve estar alinhada com transparência e auditabilidade para ser incorporada com segurança. Para a experimentação, foi utilizado o método de pesquisa-ação com a aplicação da Hiperautomação, visando aumentar a arrecadação e a economia do Estado na Procuradoria Geral do Estado de Pernambuco.

This study aims to analyze the interconnection between the concepts of digital economy and sustainability. These concepts have become popular due to awareness of climate change and increased development and adoption of technologies. Researchers, business leaders and policymakers are exploring the many ways digital technologies can be used to address sustainability issues. Using a systematic literature review with a bibliometric analysis, we examined a sample of 92 studies indexed in SCOPUS to identify research activity on this topic through April 2023. We found that 2022 had the highest number of peer-reviewed papers on the subject, with 31 publications. During the research, we also identified multiple opportunities for this interconnection, such as developing renewable energy and sustainable technological solutions, smart cities and sustainable urbanization, and sustainable consumption. These opportunities enabled by digital technologies allow companies to adopt sustainable business strategies and develop sustainable products. Despite these opportunities, the digital economy presents several challenges that can hinder efforts to achieve sustainability goals, such as increased e-waste, high energy consumption and rising carbon emissions, digital divide, job insecurity, growing monopolies, and data protection. These issues must be addressed to enable optimal use of the opportunities presented in the digital economy to promote sustainability.

During most of the lifespan of the Venetian republic, doges or presidents were elected for life. However, a long tenure was a rare event, which effectively resulted in term limits, as has already been deported by several authors. In this paper we examine these tenures and its evolution during the existence of the Venetian republic, trying to prove Smith et al. thesis, but also the event or events that effectively caused that limitation by design. Finally, we will discuss for the causes of this limitation and its effective consequences.

The runoff coefficient (C) represents the relationship between the surface runoff volume and the precipitated volume. It is used in engineering projects for flood estimation methods. Although C values are tabulated and consecrated in hydrological engineering, as if they were constant, they may not correspond to the reality, because in the same catchment, they can vary according to the intensity, temporal and spatial distribution of precipitation events, humidity conditions, and ground cover. This study had the objective of analyzing extreme events of precipitation and the corresponding flows to obtain experimental runoff coefficients (C) and compare them with the tabulated values. The study was conducted in four experimental catchments in the State of São Paulo, Brazil, with different land uses and soils. The runoff coefficients (C) were obtained from the analysis of hydrograms and using a digital filter, which allowed the separation of the direct runoff, of the total flow. When analyzing flow and precipitation data in different seasons of the year, selecting events of the floods of catchments and separating the flows, we observed a variation of the flow coefficient values, different from those obtained from tables.

The surge in big data and analytics has catalysed the proliferation of cybercrime, largely driven by organisations' intensified focus on gathering and processing personal data for profit, often overlooking security considerations. Hadoop and its derivatives are prominent platforms for managing big data, however, investigating security incidents within Hadoop environments poses intricate challenges due to scale, distribution, data diversity, replication, component complexity, and dynamicity. This paper proposes a digital forensics readiness framework and an incident response script for Linux-Hadoop systems, streamlining preliminary investigations. The framework offers a novel approach to digital forensics in the domains of big data and Hadoop environments. A prototype implementing important aspects of the DFR framework was developed and evaluated through comprehensive functionality and usability testing. The results demonstrated robust performance and efficacy.

The use of didactic and interactive materials is essential in generating interest among students and teachers in utilizing mathematical models and digital technologies for the educational process. These materials create a dynamic and engaging learning environment that promotes a deeper understanding of complex concepts and fosters a passion for learning. Additionally, integrating interactive materials into pilot courses can assist teachers in better assessing student learning and adjusting the teaching strategies accordingly and the teachers can receive valuable insights into students' strengths and weaknesses, allowing them to provide targeted support and intervention when needed. In this context, the purpose of this paper is to introduce an approach for solving mathematics problems embedded in technical scenarios within the defense and security fields with the aid of digital technology. In this way, students can visualize abstract concepts, experiment with different scenarios, and receive instant feedback on their understanding. This paper helps to reinforce key concepts and enhance problem-solving skills, sparking curiosity, creativity, and encouraging active participation and collaboration. Throughout the development of this proposal, good practices are adopted, and advice for improvement is collected while having a wide range of users, giving feedback, discussions, and testing (pilot) short-term learning/teaching/training activities.

Delve into the ebb and flow of human ingenuity as the researcher traces the evolution of writing from papyrus to pixels. Discover how humble instruments like quill pens and typewriters have propelled human into the digital frontier, forever reshaping the art of expression in the modern age. This article examines the evolution of writing tools from traditional pen and paper to digital writing in the modern age. It explores the development of writing materials such as papyrus, parchment, and paper, as well as the invention of writing tools including quill pens, fountain pens, and typewriters. The rise of digital writing tools, including word processing software and smartphones, is also discussed, along with their benefits such as increased efficiency and productivity, enhanced collaboration and sharing capabilities, and greater accessibility and flexibility. However, the article also highlights the challenges of writing in the digital age, including the impact of digital distractions on writing focus and quality, the issue of online plagiarism and copyright infringement, and the potential loss of traditional writing skills. The article concludes with recommendations for educators, school administrators, students, and researchers to strike a balance between digital and traditional writing practices, to embrace digital writing tools while preserving traditional writing skills, and to understand the importance of the evolution of writing. The theoretical frameworks of Social Construction of Technology (SCOT) Theory, Media Ecology Theory, and Activity Theory are also discussed in relation to the evolution of writing tools. Overall, this article provides valuable insights into the history, benefits, and challenges of writing in the digital age, as well as suggestions for navigating the future of writing and its tools.

We present a data-driven, in situ proximal multi-sensor digital soil mapping approach to develop digital twins for multiple agricultural fields. A novel Digital Soil CoreTM (DSC) Probe was engineered that contains seven sensors, each of a distinct modality, including sleeve friction, tip force, dielectric permittivity, electrical resistivity, soil imagery, acoustics, and visible and near-infrared spectroscopy. The DSC System integrates components the DSC Probe, DSC software, and deployment equipment to sense soil characteristics at a high vertical spatial resolution (mm scale) along in situ soil profiles up to a depth of 120 cm in about 60 sec. The DSC Probe in situ proximal data are harmonized into a data cube providing vertical high-density knowledge associated with physical-chemical-biological soil conditions. In contrast, conventional ex situ soil samples derived from soil cores, soil pits, or surface samples analyzed using laboratory and other methods are bound by substantially coarser spatial resolution and multiple compounding errors. Our objective was to investigate the effects of mismatched scale between high-resolution in situ proximal sensor data and coarser resolution ex situ soil laboratory measurements to develop soil prediction models. Our study was conducted in central California soil in almond orchards. We collected DSC sensor data and spatially co-located soil cores that were sliced into narrow layers for laboratory-based soil measurements. Partial Least Squares Regression (PLSR) cross-validation was used to compare results testing four data integration methods. Method A reduced the high-resolution sensor data to discrete values paired with layer-based soil laboratory measurements. Method B used stochastic distributions of sensor data paired with layer-based soil laboratory measurements. Method C allocated the same soil analytical data to each one of the high-resolution multi-sensor data within a soil layer. Method D linked the high-density multi-sensor soil data directly to crop responses (crop performance and behavior metrics) bypassing costly laboratory soil analysis. Overall, the soil models derived from Method C outperformed Methods A and B. Soil predictions derived using Method D were most cost-effective for directly assessing soil-crop relationships, making this method well-suited for industrial-scale precision agriculture applications.

In response to escalating global demand for poultry, the industry grapples with an array of intricate challenges, from enhancing productivity to improving animal welfare and attenuating environmental impacts. This comprehensive review explores the transformative potential of digital phenotyping, an emergent technological innovation at the cusp of dramatically reshaping broiler production. The central aim of this study is to critically examine digital phenotyping as a pivotal solution to these multidimensional industry conundrums. Our investigation spotlights the profound implications of 'digital twins' in the burgeoning field of broiler genomics, where the production of exact digital counterparts of physical entities accelerates genomics research and its practical applications. Further, this review probes into the ongoing advancements in the research and development of a context-sensitive, multimodal digital phenotyping platform, custom-built to monitor broiler health. I critically evaluate this platform's potential in revolutionizing health monitoring, fortifying the resilience of broiler production, and fostering a harmonious balance between productivity and sustainability. Subsequently, the paper provides a rigorous assessment of the unique challenges that may surface during the integration of digital phenotyping within the industry. These span from technical and economic impediments to ethical deliberations, thus offering a comprehensive perspective. The paper concludes by highlighting the game-changing potential of digital phenotyping in the broiler industry and identifying potential future directions for the field, underlining the significance of continued research and development in unlocking digital phenotyping's full potential. In doing so, it charts a course towards a more robust, sustainable, and productive broiler industry. The insights garnered from this study hold substantial value for a broad spectrum of stakeholders in the broiler industry, setting the stage for an imminent technological evolution in poultry production.

This paper looks at key elements of global culture that are driving a new paradigm shift in museums causing them to question their raison d'être, their design and physical space, recognizing the need to accommodate visitor interaction and participation, and to reprioritize institutional outcomes and goals reexamining their priorities. As heritage sharing in online spaces reaches across national, political, and social boundaries on platforms and networks, this has been driven by museum engagement with Internet life during the pandemic. Museum relationships and interactions with communities both local and global, continue to challenge core values and precepts, leading to radical changes in how museums define their roles and responsibilities. In this new cultural landscape, museums are responding to human digital identity in a tidal wave of human interactions on the Internet, from social media to online sharing of images and videos. This is revealing shared perspectives on cultural conflict as being tied to freedom of expression of one’s heritage embedded in digital identity.

The emergence of precision and digital livestock farming presents an opportunity for sustainable animal farming practices that enhance animal welfare and health. However, this transformation of modern animal farming through digital technology has several implications for the technological, social, economic, and environmental aspects of farming. It is crucial to analyze the ethical considerations associated with the digitalization of modern animal farming, particularly in the context of human-animal relationships and potential objectification. This analysis can help develop frameworks for improving animal welfare and promoting sustainability in animal farming.One of the primary ethical concerns of digital livestock farming is the potential for a digital divide between farmers who have access to advanced technologies and those who do not. This could lead to a disparity in animal welfare and health outcomes for different groups of animals. Additionally, the use of artificial intelligence in digital livestock farming may lead to a loss of personal connection between farmers and animals, which could impact the animal's well-being. Another ethical concern of digital livestock farming is the potential for objectification of animals as mere data points. The use of sensors and other monitoring technologies can provide valuable data on animal health and behavior, but it is important to remember that animals are sentient beings with complex emotional and social needs. The use of digital technologies should not lead to neglect of animal welfare or a lack of human responsibility towards animals.Furthermore, social context becomes essential while integrating technologies in the livestock farming to overcome ethics. By considering the cultural and societal norms of different communities, we can ensure that the use of digital technologies does not undermine these values. To address these ethical challenges, the development of standards and codes of conduct for the adoption and implementation of digital livestock farming tools and platforms can help ensure that animal welfare and sustainability are prioritized. This can help alleviate the privacy concerns of stakeholders and improve sustainability in animal farming practices. Additionally, the use of virtual and augmented reality technologies can provide a way to enhance human-animal interactions and provide more personalized care to animals, further promoting animal welfare.

The learning system is primarily based on teaching, and teaching through digital resources is referred to as e-learning. As the world progresses towards success day by day, the use of technology, digital devices, and modern techniques is becoming increasingly prevalent. The global shift from traditional paperwork to digital learning is one of the most significant changes in the education sector. However, many factors have created numerous hurdles during the online setup. The Covid-19 pandemic has led to serious problems all over the world, with the education sector being one of the most affected. One of the greatest challenges students face during online education is the lack of digital infrastructure, especially in remote areas of Pakistan. The biggest challenge is connecting students with teachers due to limited internet access. Without proper internet connectivity, both students and teachers cannot access educational materials. In this context, the government plays a crucial role in providing adequate facilities to students, particularly in primary schools. If proper infrastructure is not made available during this pandemic, students will be deprived of a good quality education. Therefore, good infrastructure is essential for effective online education. With the proper resources in place, students will be able to receive a quality education.

This review paper explores the multifaceted landscape of digital heritage preservation and presentation, focusing on various methods and technologies employed in the field. The introduction highlights the significance of digital heritage in preserving and showcasing cultural, historical, and natural assets. It emphasizes the non-destructive nature of digital preservation methods, enabling wider access and research possibilities. The paper also discusses the relevance of cultural computing in creating engaging user experiences and recognizes its potential in bridging cultural gaps. The literature review section presents a diverse range of technologies and tools, such as ZENetic Computer, C-Vyasa Sanskrit, Pandulipi Samshodhak, JATAN, and immersive projects like "Alice in Wonderland." The methods and technologies section delves into the technical aspects of digital heritage preservation. It explores photogrammetry, 3D depth sensing, 3D laser scanning, augmented reality, digital storytelling, focus stacking, and multiple view stereovision. Each technology is discussed in detail, highlighting its applications, benefits, and relevance in cultural heritage preservation. Finally, the comparative analysis section offers insights from various research papers and books, comparing different methodologies and approaches in the field. This review paper provides a comprehensive overview of digital heritage preservation, showcasing the diverse methods and technologies that contribute to the safeguarding and presentation of our cultural heritage for future generations.