Analysis of Fatigue Strain, Fatigue Modulus and Fatigue Damage for the modeling of concrete plays a vital role in the evolution material behaviour which is heterogeneous and anisotropic in nature. In this paper, the Level-S nonlinear fatigue strain curve, fatigue modulus curve, residual strain curve of concrete in compression, tension, flexure and torsional fatigue loading were proposed using strain life approach. The parameters such as physical meaning, the ranges, and the impact on the shape of the curve were discussed. Then, the evolution model of fatigue modulus was established based on the fatigue strain evolution model, fatigue modulus evaluation model, residual strain evaluation model, secondary strain evaluation model. The hypothesis of fatigue modulus is inversely related with the fatigue strain amplitude. The fatigue evolution of concrete damages the bond between material grains, changed the orientation of structure of molecules and affects the elastic properties resulting in the reduction of material stiffness and modulus by utilizing strain life analysis, regarding stiffness degradation and inelastic deformation by formation of microcracking, macro cracking, cracking which is heterogeneous and anisotropic in nature . This paper presents the Fatigue Strain Life Model and analyses of fatigue strain, fatigue modulus and damage parameters of concrete which is capable of predicting stiffness degradation, inelastic deformation, strength reduction under fatigue loading. Hence, the obtainable results were compared with experimental results for the validation of the proposed model.

The concept of Design Fatigue Factors (DFFs) was introduced for providing desired level of safety in structural fatigue design, often associated with damage calculated from S-N curves. Calculation of fatigue damage from S-N curves can be affected by multiple factors, e.g. types of weld class, corrosion condition, loading conditions, stress concentration on different geometries etc. Each of them can be subject to different level of uncertainties. This study intends to recalibrate the DFFs from a detailed reliability analysis by investigating the probabilistic models derived from the database of S-N curves that has been most frequently used in offshore wind industry. The results of such study indicate that the DFFs can be reduced substantially for the corrosive environmental fatigue models from current standards to the same level of target reliability.

Crohn's disease (CD) is a chronic, relapsing disorder belonging to inflammatory bowel diseases (IBD). It is manifested by relapsing transmural inflammation found in any segment of the gastrointestinal tract. Chronic fatigue is a common and underrecognized symptom of CD, which prevalence is much higher in the population of CD patients as compared to healthy population. It stems from an intricate web of interactions between various risk factors, and its pathophysiology is still not fully understood. Implementation of routine screening and holistic, multidisciplinary approach involving psychological support may be crucial in management of CD patients with chronic fatigue. There is currently no single intervention aimed at decreasing fatigue alone, and its treatment is especially difficult in patients with fatigue persisting despite clinical and endoscopic remission. Extensive research is still needed in order to be able to predict, prevent, identify and ultimately treat fatigue associated with CD. The aim of this review is to summarize the knowledge on the etiology, diagnosis, and treatment of chronic fatigue in CD patients.

This paper reassesses the detrimental effect on fatigue performance due to thicker sections based on extensive fatigue strength test database, taken from research program worldwide over the past half of a century in offshore oil & gas and renewable industry. The data entries in the database have been evaluated to ensure its data integrity. Statistical analyses on these S-N data are performed with or without the thickness correction at different exposure level to corrosive environment, in order to re-evaluate the suitability of current standards in regard to the thickness effect. The study has concentrated on T-joint, transverse butt welded joint and tubular joint as these are the most commonly used joint types in the offshore wind industry. The analysis indicates general agreement of fatigue strength with the thickness effects in current standard for in air conditions but great conservatism for corrosive environment.

Post-mortem characterisation is a pivotal tool to trace back to the origin of structural failures in modern engineering analyses. This work presents a comparison of both the crack propagation profiles and the rupture roughness profiles based on areal parameters for total fracture area. Notched and smooth samples made of weather-resistant structural steel (10HNAP), popular S355J2 structural steel and aluminium alloy AA2017A under bending, torsion, and combined bending-torsion are investigated. After the fatigue tests, fatigue fractures are measured with an optical profilometer, and the relevant surface parameters are critically compared. The results show a great impact of the loading scenario on both the local profiles and the total fracture areas. In this work, the results of both approaches (local and total fracture zones) for specimens with different geometries are investigated. For all specimens, measured texture parameters decreased in the following order: total area, rupture area, and propagation area.

The effect of low cycle fatigue (LCF) pre-damage on the subsequent very high cycle fatigue (VHCF) behavior is investigated in TC21 titanium alloy. LCF pre-damage is applied under 1.8% strain amplitude up to various fractions of the expected life and subsequent VHCF properties are determined using ultrasonic fatigue tests. Results show that 5% of LCF pre-damage insignificantly affects the VHCF limit due to the absent of pre-crack, but decreases the subsequent fatigue crack initiation life estimated by Pairs’ law. Pre-cracks introduced by 10% and 20% of LCF pre-damage significantly reduce the subsequent VHCF limits. The crack initiation site shifts from subsurface-induced fracture for undamaged and 5% of LCF pre-damage specimens to surface pre-crack for 10% and 20% of LCF pre-damage specimens in very high cycle region. The fracture mechanism analysis indicate that LCF pre-crack will re-start to propagate under subsequently low stress amplitude when stress intensity factor of pre-crack is larger than its threshold. Furthermore, the predicted fatigue limits based on EI Haddad model for the LCF pre-damage specimens well agree with the experimental results.

At present, failure definition and damage characteristic curve (DCC) analysis included in the framework to assess bitumen fatigue cracking performance have an inconsistency in ranking bitumen fatigue behaviour. This study utilized two types of self-healing polymers (STP and IPA1w) to modify the neat asphalt (NA), and research four different types of bitumens: NA, STP-modified bitumen, IPA1w-modified bitumen, and styrene-butadiene-styrene modified bitumen (SBSB), to evaluate the above-mentioned framework. All bitumens were subjected to short-term and long-term aging and tested utilizing the Linear amplitude sweep (LAS) test and simplified viscoelastic-continuum-damage (S-VECD) model. The results showed that the SBSB exhibited the highest numbers of loading cycles (in long-term aging analysis) to reach failure points at 25°C, 28°C, and 31°C which were 2290, 2340, and 2510, respectively. However, this bitumen failed to exhibit the best performance in terms of DCC assessment under the same conditions, confirming the above-mentioned inconsistency. Besides, the current failure criterion could not accurately predict bitumen fatigue behaviour under certain test conditions because two R2 values were below 0.1. As a result, this study proposed a new failure definition and failure criterion to overcome these issues. The proposed failure definition agreed with the DCC analysis to rank bitumen fatigue performance, and the proposed failure criterion showed R2 values higher than 0.9. The new framework presented the modified bitumen containing 0.5% of STP as the asphalt binder with the best fatigue cracking performance, according to the selected test conditions.

The fatigue life of concrete is affected by many interwoven factors whose effect is nonlinear. Be-cause of its unique self-learning ability and strong generalization capability, the Bayesian regu-larized backpropagation neural network (BR-BPNN) is proposed to predict concrete behavior in tensile fatigue. The optimal model was determined through various combinations of network parameters. The average relative impact value (ARIV) was constructed to evaluate the correla-tion between fatigue life and its influencing parameters (maximum stress level Smax, stress ratio R, static strength f, failure probability P). ARIV results were also compared with other factor as-sessment methods (weight equation and multiple linear regression analyses). Using BR-BPNN, S-N curves were then obtained for the combinations of R=0.1, 0.2, 0.5; f=5, 6, 7MPa; P=5%, 50%, 95%. The tensile fatigue results under different testing conditions were finally compared for compatibility. It was concluded that Smax has the most significant negative effect on fatigue life; the degree of influence of R, P, and f, which positively correlate with fatigue life, decreases suc-cessively. ARIV is confirmed as a feasible way to analyze the importance of parameters and could be recommended for future applications. The tensile fatigue performance of plain concrete under different stress states (flexural tension, axial tension, splitting tension) does not differ sig-nificantly. Besides utilizing the valuable fatigue test data scattered in the literature, insights gained from this work could provide a reference for subsequent fatigue test program design and fatigue evaluation.

Fatigue loading is critical to fibre reinforced polymer composites due to their anisotropic and heterogenous nature. This study investigated the tensile fatigue behaviour of polyester and vinyl ester based GFRP laminates to understand the critical aspects of failure mode and fatigue life under cyclic loading. GFRP laminates with two different resin systems (polyester and vinyl ester), two different stress ratios (0.1 and 0.5) and two different environmental conditions (air and water) were investigated at an applied stress of 80%, 60% and 40% of the ultimate capacity. Based on the investigated parameters (i.e., resin types, stress ratio, environmental conditioning and maximum applied stress), a fatigue model was proposed. Results show that the resin system plays a great role in fatigue failure mode while the stress ratio and environmental condition significantly affect the tensile fatigue life of GFRP laminates. The types of resin used in GFRP laminates and environmental conditions as input parameter in the proposed fatigue model is a unique contribution.

An untrained couch potato involuntarily forced to undergo a long strenuous exercise towards exhaustion will feel it at the end as a discomforting fatigue. A well-trained athlete will feel the same but after a longer time. Patients of various neurological diseases will do so much earlier. All may also finally experience muscle pain and soreness the next day.Muscle fatigue is an exercise-induced reduction in maximal voluntary muscle force. Muscle fatigability varies with muscle use, age and sex. It is commonly divided into two broad categories: peripheral and central fatigue. The first refers to the many processes in the fatiguing muscle(s), the second to subsequent processes in the central nervous system (CNS). Peripheral muscle fatigue can be caused by numerous different mechanisms, ranging from the accumulation of metabolites within muscle fibers to their damage. Central fatigue involves the inadequacy of the CNS to generate and maintain sufficiently strong motor command. There must of course be a mediator relating the two fatigue types, and this is the collection of small-diameter group III (Aδ) and IV (C) nerve fibers emanating from the muscle and distributing their activation effects throughout the CNS.Muscle fatigue develops during eventually exhausting exercise that goes along with activations of the cardio-vascular and respiratory system to supply oxygen and energy resources. While these functions are supported by a number of sensory afferents, fatigue-activated group III/IV muscle afferents have been proposed to contribute their share to cardio-vascular and ventilatory reflex responses that are mediated in the brainstem. Neural feedback from working skeletal muscle is a vital component in providing a high capacity for endurance exercise because muscle perfusion and O₂ delivery determine the fatigability of skeletal muscle (Amann 2012).The development of chronic muscle fatigue is related to muscle wasting mediated by aging, myopathies, muscle dystrophies, immobilization, insulin resistance, diseases associated with systemic inflammation (arthritis, sepsis, infections), trauma, cardio-vascular (heart failure) and respiratory disorders (chronic obstructive pulmonary disease (COPD)), chronic kidney failure, multiple sclerosis (MS), and, more recently, coronavirus disease 2019 (COVID-19).

Fastener holes are among the most common natural stress concentrators in metal structures. The life cycles of various structural elements, such as those in aircraft structures, automobiles, and rail-end bolt joints are limited by fatigue damage around the holes. An effective approach to delay the formation and growth of fatigue macrocracks is to introduce residual hoop compressive stresses around the holes. Two methods have become established in the prestressing of fastener holes in aircraft components: split sleeve and split mandrel, which implement one-sided processes. The common disadvantage of both methods is the complex procedure due to the need for high accuracy of the initial holes. This article presents a new modified split mandrel method providing the same tightness (interference fit) with a wide tolerance of the pre-drilled hole diameters reducing the number of technological cycle steps and production costs. То implement the new method, a functionally connected tool and a device with a hydraulic drive were developed. An extensive experimental study of 2024-T3 AA specimens was carried out to evaluate the effectiveness of the method under a high scattering of the pre-drilled holes. The new method provided a deep zone of residual hoop compressive stresses on both faces of the specimens after cold working and after hole final reaming. The removal of a plastically deformed layer around the hole of suitable thickness during the final reaming decreased the axial gradient of residual hoop stress distribution. Fatigue tests on a tensile pulsating cycle verified the effectiveness of the modified split mandrel method to significantly increase the fatigue life by 6.6 times based on cycle fatigue strength compared to the conventional case of machining the holes. The obtained S-N curves for three groups of samples with initial hole diameters of 8.0, 8.1, and 8.2 mm which were cold worked with the same tightness of 0.32 mm and final reamed, aligned well indicating that the new method can provide constant fatigue strength for a given stress amplitude.

TThe aim of the work is to present a newly developed stand and methodology of accelerated tests of fatigue strength of flexible propellers and fins. The paper presents the design and concepts of the measuring elements used in the research. Test methodology and water stressing were devel-oped. The mechanical properties of the following materials were presented: Arnitel EL-550 and QUEO 8230 with the addition of PP / EVA 50/50 (polypropylene / ethylene-vinyl acetate) - in the proportion of 70/30 (QUEO 8230 / additive). The constructed test stand and a new method of fa-tigue testing of biomimetic fins made it possible to determine the number of fin movement cy-cles under a given load, which may facilitate the determination of a warranty for a newly intro-duced product. The current consumption by the fin drive and video monitoring allowed for the selection of the range of the number of movement cycles and the determination of the moment of fatigue cracks until the fin structure loses its capacity. During the analysis, the test results showed that the fins made of Arnitel EL-550 did not show changes in the measured values of the current and the force generated by the fin. For a fin made of QUEO 8230, at 35,000 cycles, there is a decrease in the current and force consumed, which indicates the initiation of fatigue damage to the fin. The performed tests can be the basis for the development of standards for the fatigue strength of flexible propellers.

Myalgic encephalomyelitis/chronic fatigue syndrome (ME/CFS) is a complex, multisystem, and profoundly debilitating condition, probably of multifactorial etiology. No effective approved drugs are currently available for its treatment. Several studies have proposed symptomatic treatment with melatonin and zinc supplementation in chronic illnesses; however, little is known about the synergistic effect of this treatment on fatigue-related symptoms in ME/CFS. The primary endpoint of the study was to assess the effect of oral melatonin plus zinc supplementation on fatigue in ME/CFS. Secondary measures included participants’ sleep disturbances, anxiety/depression, and health-related quality of life. A proof-of-concept, 16-week, randomized, placebo-controlled, double-blind trial was conducted in 50 ME/CFS patients assigned to receive either oral melatonin (1 mg) plus zinc (10 mg) supplementation (n = 24) or matching placebo (n = 26) once daily. Endpoint outcomes were evaluated at baseline and then reassessed at 8 and 16 weeks of treatment and 4 weeks after treatment cessation, using self-reported outcome measures. Treatment was safe and well-tolerated. The most relevant results were the significant reduction in the perception of physical fatigue in the active group at the final follow-up versus placebo (p < 0.05), and the significant improvement in the physical component summary at all follow-up visits in the experimental group. Our findings suggest that oral melatonin plus zinc supplementation for 16 weeks is safe and potentially effective in reducing fatigue and improving the quality of life in ME/CFS. This clinical study was registered on ClinicalTrials.gov (NCT03000777).

This paper aims to provide an overall review of degradation, damage evolution and fatigue models in the literature of various engineering materials, mostly metals, and composites.

Fatigue is a recognized concern in air traffic management, prompting international bodies like ICAO and EASA to advocate for Fatigue Risk Management Systems (FRMS). EU Regulation 2017/373, effective since January 2020, imposes specific requirements on air traffic service providers regarding controllers' fatigue, stress, and rostering systems, as part of safety management protocols. Despite active campaigns promoting fatigue awareness in air traffic control (ATC), there remains a need for standardized operational requirements. Eurocontrol recently published "Guidelines on fatigue management in ATC rostering systems" (April 23), aiming to facilitate the adoption of common fatigue operational standards. However, neither EU Regulation 2017/373 nor existing documentation specifies exact rostering criteria. Air Navigation Service Providers (ANSPs) typically derive these criteria from scientific literature, best practices, historical data, and legal and operational necessities. Yet, assessing and monitoring fatigue in operational settings can be complex and require long-term studies due to its multifaceted nature, spanning factors such as sleep quality, circadian rhythms, psychosocial influences, individual traits, and environmental conditions. The case studies reported in this paper represent an attempt to create an evidence-based protocol for fatigue risk monitoring in ATC operations, utilizing a non-invasive approach and collecting multidimensional data. The two case studies involved en-route and tower controllers from different ATC Centers, and the results underscore the importance of fatigue assessment in ATC and elucidates challenges in implementing fatigue monitoring within operational contexts.

For underwater vehicles navigating in Arctic Sea ice-covered waters, fatigue damage is a crucial issue. Many scholars have conducted low-temperature fatigue analysis on low-temperature ma-terials and substrate platforms for ships, and the results show that low-temperature is beneficial for improving the mechanical properties of materials. However, they mainly focus on low-temperature performance experiments and simulation analysis of standard components of materials, and there are very few fatigue life experimental studies on underwater vehicle me-chanical structures. This paper conducts experimental investigations on a scaled model of an underwater vehicle rudder mechanism in a polar environment laboratory. Using a comparative analysis method involving simulations and experiments, the low-temperature fatigue test data of the scaled underwater vehicle rudder mechanism are analyzed, and the quantified analysis be-tween fatigue and different low-temperature loading cycles, as well as the influence of icing on the fatigue life, is explored. It is indicated that the arctic environment can decrease the fatigue life of the underwater vehicle rudder mechanism by deteriorating its material properties. The paper builds the foundation for the fatigue life of an underwater vehicle rudder mechanism in arctic low-temperature environments.

Understanding the complex relationship between sleep and memory is a major challenge in neuroscience. Many studies on memory consolidation in humans suggest that sleep triggers offline memory processes, resulting in less forgetting of declarative memory and performance stabilization in non-declarative memory. However, issues related to non-optimal experimental designs, task characteristics and measurements, and inappropriate data analysis practices can significantly affect the interpretation of the effect of sleep on memory. In this article, we discuss these issues and suggest constructive solutions to address them. We believe that implementing these solutions in future sleep and memory research will significantly advance this field by improving the understanding of the specific role of sleep in memory consolidation.

Recent works in mechanical fatigue consider that a threshold of entropy exists, the fracture fatigue entropy. The determination of this quantity is usually done considering empirical models for the mechanical power estimation. In this paper, we experimentally observe the existence of a threshold of entropy and exergy in low cycle fatigue for a flat Al-2024 specimen avoiding the use of a model, solely measuring the heat generated during a fatigue test. Results are then compared considering various hypotheses (1D heat dissipation with convection and radiation considered as heat sources, and, heat transfer from a fin with convection and radiation as boundary conditions) to an empirical mechanical model known in the literature and deviations between them are discussed.

Interior permanent magnet motors (IPMSMs) are extensively used as traction motors today because of their exceptional torque and power density, and wide constant power operating range. Under real-world usage, an IPMSM rotor undergoes varying electromagnetic, thermal, and mechanical loads. Under such conditions, fatigue life-based design criteria should be utilized over stress-based design criteria to ensure the structural integrity of the rotor. Moreover, the driving dynamics can change the rotor temperature continuously, which affects the electromagnetic, mechanical, and fatigue properties of rotor material. This paper proposes a robust thermo-mechanical rotor fatigue simulation workflow considering the significant loads acting on an IPMSM rotor and the temperature variation throughout a drive cycle. It discusses an accelerated fatigue life estimation approach based on peak valley extraction to reduce the simulation time significantly for stress and fatigue analysis. Then, it presents a method for stress-life curve generation for a variable loading. It also presents a sensitivity study with a median S-N curve, and a 90%-reliability 95%-confidence (R90C95) S-N curve.

Background: Permanent Daylight Savings Time (DST) may improve road safety by providing more daylight in the evening but could merely shift risk to morning commutes or increase risk due to fatigue and circadian misalignment. Methods: To identify how potential daylight exposure and fatigue risk could differ between permanent DST versus permanent Standard Time (ST) or current time arrangements (CTA), generic work and school schedules in five United States cities were modeled in SAFTE-FAST biomathematical modeling software. Commute data were categorized by morning (0700-0900) and evening (1600-1800) rush hours. Results: Percent darkness was greater under DST compared to ST for the total waking day (t=2.59, p=0.03) and sleep periods (t=2.46, p=0.045). Waketimes occurred before sunrise 63%±41% percent of the time under DST compared to CTA (42%±37%) or ST (33%±38%; F(2, 74)=76.37; p<0.001). Percent darkness was greater during morning (16%±31%) and lower during evening rush hour (0%±0%) in DST compare to either CTA (morning:7%±23%; evening:7%±14%) or ST (morning:7%±23%; evening:7%±15%). Discussion: Morning rush hour overlapped with students’ commutes and shift worker reverse commutes, which may increase traffic congestion and risk compared to evening rush hour. Switching to permanent DST may be more disruptive than either switching to ST or keeping CTA without noticeable benefit to fatigue or potential daylight exposure.

Most of the research of mental fatigue evaluation mainly concentrated on some indexes that require sophisticate and large instruments which make the detection of mental fatigue cumbersome, time-consuming, and difficult to apply on a large scale. A quick and sensitive mental fatigue detection index is necessary so that mental workers can be alerted in time and take corresponding countermeasures. But to date, no studies have compared the sensitivity of common objective evaluation indexes. To solve these problems this study recruited 56 human subjects. These subjects were evaluated using six fatigue indexes: the Stanford sleepiness scale, digital span, digital decoding, short-term memory, critical flicker fusion frequency (CFF), and speed perception deviation. The results of fatigue tests before and after mental fatigue were compared, and a one-way analysis of variance (ANOVA) was performed on the speed perception deviation. The result indicated the significance of this index. Considering individual differences, the relative fatigue index (RFI) was proposed to compare the sensitivity of the indexes. The results showed that when the self-rated fatigue grade changed from non-fatigue to mild fatigue, the ranges of RFI values for digital span, digital decoding, short-term memory and CFF were 0.175–0.258, 0.194–0.316, 0.068–0.139, and 0.055–0.075, respectively. Correspondingly, when the self-rated fatigue grade changed from non-fatigue to severe fatigue, the ranges of RFI values for the above indexes were 0.175–0.258, 0.194–0.316, 0.068–0.139, and 0.055–0.075, respectively. These results suggest that the sensitivity of the digital decoding, digital span, short-term memory, and CFF decreased sequentially when the self-evaluated fatigue grade changed from no fatigue to mild or severe fatigue. The RFI individuality of the speed perception deviation is highly variable and is not suitable as an evaluation index. In mental fatigue testing, digital decoding testing can provide faster, more convenient, and more accurate results.

The formation and propagation of cracks occurs through irreversible dislocation movements at notches, material defects and grain boundaries. Since this process is partly thermally controlled, the resistance to dislocation movements at low temperatures increases. This slows both fatigue initiation and fatigue crack propagation. From recent experimental data, it can be seen that fatigue crack growth is accelerated below the fatigue transition temperature (FTT) that correlates with the ductile-brittle transition temperature (DBTT) found by well-known fracture mechanics tests, i.e., Charpy impact, fracture toughness, and CTOD. Hence, this study investigates the relation between FTT and DBTT in S500 high-strength steel base material and welded joints at low temperatures using fatigue crack growth, fracture toughness tests as well as scanning electron microscopy. From the tests, an almost constant decrease in fatigue crack propagation rate is determined with decreasing test temperature even below the DBTT.

Fatigue failure remains a critical concern in structural engineering and material science, prompting extensive research to understand and predict the behaviour of materials under cyclic loading conditions. The present study aims to investigate the fatigue life of carbon steel specimens containing opposite semicircular edge notches through a comprehensive experimental and numerical analysis. In this study, stress concentration factors (SCF, K_t) of rectangular plate with opposite semicircular notches are considered under uniform tensile stress to analyse the notch deformation because of stretching of plate. Furthermore, the research focuses on quantifying stress concentration factors (SCFs) for these notches based on S-N curves of carbon steel. The study employs a combination of experimental and numerical techniques to understand the influence of these notches on the fatigue performance of carbon steel structures. A plate with opposite semicircular edge single notches under the axial load creates stress concentration near the notch and it is much larger than the average stress on the plate. Both analytical and finite element methods are used to calculate the maximum stress around the notch. SOLIDWORKS Premium Student Edition 2023 has been employed for modelling and SOLIDWORKS Simulation Premium Student Edition 2023 has been used for stress analysis and fatigue notch factor of rectangular plate of size 31 mm x 25.4 mm x 6.35 mm. The uniform tensile load with a magnitude of 20195 N is applied on one sides of rectangular plate normal to the sides of notches with ratio h/r = 1, for the semicircular notch. The result obtained on both analytical and finite element methods are compared and the percentage of error has been evaluated. Subsequently, these specimens undergo fatigue testing under varying loading conditions to capture their fatigue behaviour. The acquired fatigue data is then plotted against stress amplitude to construct S-N curves, forming the foundation for assessing the fatigue life of the notched specimens. To complement the experimental findings and to gain a deeper understanding of the stress concentration phenomenon, numerical simulations are conducted using advanced finite element analysis (FEA) techniques. The finite element models are carefully calibrated against the experimental results to ensure their accuracy and reliability. The FEA simulations enable the determination of stress concentration factors at critical locations within the notched specimens, further validating the experimental observations. The investigation reveals crucial insights into the effect of opposite semicircular edge notches on the fatigue life of carbon steel structures. The obtained S-N curves allow engineers and designers to predict the fatigue life of components with similar notches, aiding in the development of reliable and durable structures in practical applications. Moreover, the stress concentration factors determined from the numerical simulations provide valuable data to assess the potential failure modes and to optimise designs, effectively mitigating fatigue-related failures. The combination of experimental and numerical approaches ensures a comprehensive and rigorous analysis of the fatigue behaviour in notched specimens, offering a reliable basis for making informed engineering decisions. The comparison between the analytical method and the Finite Element Method (FEM) demonstrated good agreement, with an error percentage of 4.272%. The analysis revealed that the specimen would experience failure after approximately 2882 cycles, with a maximum stress of 395.914 MPa. This research study enhances the understanding of fatigue life in carbon steel structures containing opposite semicircular edge notches and contributes valuable data to the field of fatigue mechanics. The outcomes serve as a valuable resource for professionals engaged in structural engineering, material science, and design optimisation, ultimately leading to safer and more durable industrial components in critical applications. The findings of this research contribute to the understanding of fatigue behaviour in carbon steel components with stress concentration effects caused by semicircular notches. Moreover, the validated numerical simulations and data curves facilitate the prediction of fatigue life and aid in determining the critical conditions leading to fatigue failure. In conclusion, this research highlights the significance of combining experimental testing with numerical simulations to comprehensively analyse the fatigue life of carbon steel specimens with opposite semicircular edge notches. The obtained stress concentration factors provide crucial information for structural integrity assessment and offer potential for further optimising design criteria to mitigate fatigue-related failures. The findings of this study could play a vital role in enhancing the reliability and safety of carbon steel structures subjected to cyclic loading conditions. The comprehensive experimental and numerical analyses establish a foundation for future studies exploring other materials and geometries with notches, fostering advancements in fatigue life prediction and structural integrity assessment.

Most of the damage to Vleg cars was caused by material fatigue. The objectives of the fatigue analysis on Xenia 2011 car wheels with the Finite Element Method using Solidworks are: 1) Knowing the fatigue analysis process on car wheels, 2) Knowing the results of the fatigue analysis on car wheels. The research method used is the Finite Element Method (FEM) method; the re-search steps include model data retrieval from the Wheel code, 3D model creation process, static simulation process according to SAE J 328 standard, mesh variations, fatigue simulation, and finally, standardization of results fatigue simulation regarding the SAE J 328 standard. The re-sults of the fatigue analysis on the Xenia 2011 car wheels obtained an age of 1000,000 cycles when compared with the minimum average of SAE J 328 of 600,000 cycles, this product design is clas-sified as a high cycle, which means it will experience a prolonged failure, and this design has a maximum alternating stress value of 627.4702 MPa, a strain of 0.007105, a displacement of 7.148 mm and a SOF of 0.087890 with a load factor used of 2.5, so overall this Xenia car can be loaded with a load of 1775 kg, if it is more than that, then Wheels will experience cracking.

The aim of this study was to compare the screw removal torque of mini conical prosthetic components and straight trunnion of indexed morse taper implants, after mechanical cycling. The sample consisted of 40 implants and 20 mini-conical prosthetic components (MC group) and 20 straight trunnion components (ST group). Each group consisted of 10 specimens, with 2 implants in each, and cobalt-chromium metallic crowns were screwed into each sample. The components of the MC group received a torque of 20 N.cm with a digital torque wrench and after 10 minutes were retightened with the same value as the initial torque. The components of the ST group received a torque of 30 N.cm, with a digital torque wrench and after 10 minutes, they were retightened with the same value. The screws of the respective crowns of the two groups received a torque of 10 N.cm and after 10 minutes were retightened with the same value. Each group was subjected to the fatigue test in a mechanical cycler at 2.000.000 cycles, with a load of 250 N and frequency of 4 Hz. At the end of the fatigue test, the loosening torque of each screw of the specimens was measured through a digital torque wrench. The data were analyzed by two-way ANOVA and Tukey test. In both groups, there were loss of torque. The results showed no statistic difference between MC and ST groups.

Nonlinear ultrasonic testing has been accepted as a promising manner for evaluating material integrity in an early stage. Stress fatigue is the main threats to train safety, railways examinations for stress fatigue are more significant and necessary. A series of ultrasonic nonlinear wave experiments are conducted for rail specimens extracted from railhead with different degree of fatigue produced by three-point bent loading condition. The nonlinear parameter is the indicator of nonlinear waves for expressing the degree the fatigue. The experimental results show that the sensitivity of a third harmonic longitudinal wave is higher than second harmonic longitudinal wave testing. As the same time, collinear wave mixing shows strong relative with fatigue damages than a second longitudinal wave NDT method and provides more reliable results than third harmonic longitudinal waves nonlinear testing method.

Background: Knee joint is a common site for injury among younger people, the purpose of this study is to measure the skeletal muscle endurance and strength on people with prior knee reconstruction surgery. Methods: Young healthy female subjects were tested who reported having knee reconstruction surgery of over one year prior to testing. The skeletal muscle endurance index of the hamstring and quadriceps muscles was determined as the decline in the specific muscle acceleration in response to 2, 4, and 6 Hz electrical stimulation. Maximal isometric muscle strength (MVC) was measured in the hamstring and quadriceps muscles. Results: The hamstring muscles in the affected leg had less endurance than the non-affected leg at 6 Hz stimulation (55.5 ± 13.2% versus 78.0 ± 13.3%, P = 0.01). Muscle endurance was not reduced in the quadriceps muscles in the affected leg compared to the non-affected leg at 6 Hz stimulation (78.0 ± 13.3% versus 80.3 ± 10.0%, P = 0.69). There were no differences in MVC between the affected and non-affected legs for either the hamstring (P= 0.20) or quadriceps muscles (p = 0.67). Conclusions: Muscle endurance is reduced in the hamstring muscles at least one-year post injury, while hamstring strength is not. Reduced hamstring muscle endurance could be a result of a lack of focus on muscle endurance during rehabilitation after injury and may contribute to re-injury in the particular muscle even in people who have recovered muscle strength.

Post-viral fatigue syndrome (PVFS) encompasses a wide range of complex neuroimmune disorders of unknown cause characterized by disabling post-exertional fatigue, myalgia and joint pain, cognitive impairments, unrefreshing sleep, autonomic dysfunction, and neuropsychiatric symptoms. It includes myalgic encephalomyelitis, also known as chronic fatigue syndrome (ME/CFS), fibromyalgia (FM), and more recently post-COVID-19 condition (Long COVID). To date, there are no definitive clinical case criteria and no FDA-approved pharmacological therapies for PVFS. Given the current lack of effective treatments, there is a need to develop novel therapeutic strategies for these disorders. Mitochondria, the cellular organelles responsible for tissue energy production, have recently garnered attention in research into PVFS due to their crucial role in cellular bioenergetic metabolism in these conditions. Accumulating literature has identified a link between mitochondrial dysfunction and low-grade systemic inflammation in ME/CFS, FM, and Long COVID. To address this issue, this article aimed to critically review the evidence relating to mitochondrial dysfunction in the pathogenesis of these disorders; in particular, to evaluate the effectiveness of coenzyme Q10 supplementation on chronic fatigue and pain symptoms as a novel therapeutic strategy for the treatment of PVFS.

We asked whether the level of peripheral fatigue would differ when three consecutive exercise trials were completed to task failure, and whether there would be delayed recovery in maximal voluntary contraction (MVC) force, neuromuscular activation and peripheral fatigue following task failure. Ten trained sport students performed three consecutive knee extension isometric trials (T1, T2, T3) to task failure without breaks between trials. T1 and T2 consisted of repeated 5-s contractions followed by 5-s rest. In T1, contractions were performed at a target force at 60% pre-exercise MVC. In T2, all contractions were MVCs, and task failure occurred at 50% MVC. T3 was a sustained MVC performed until force fell below 15% MVC. Evoked force responses to supramaximal electrical femoral nerve stimulation were recorded to assess peripheral fatigue. Electromyography signals were normalized to M-wave amplitude to assess neuromuscular activation. Lower levels of evoked peak forces were observed at T3 compared to T2 and T1. Within 5 s of task failure in T3, MVC force and neuromuscular activation recovered substantially without any recovery in evoked peak force. Neuromuscular activation 5-10 s after T3 was unchanged from pre-exercise values, but evoked peak forces were substantially reduced. These results challenge the existence of a critical peripheral fatigue threshold that reduces neuromuscular activation. Since neuromuscular activation changed independently of any change in evoked peak force, immediate recovery in force production after exercise is due to increased central recruitment and not to peripheral mechanisms.

Additive manufacturing (AM) techniques are widely investigated for the cost-effective use of titanium (Ti) alloys in various aerospace applications. One of the AM techniques developed for such applications is plasma transferred arc solid free-form fabrication (PTA-SFFF). Materials manufactured through AM techniques often exhibit anisotropies in mechanical properties due to the layer-by-layer material build. In this regard, the present study investigates the isothermal directional fatigue of Ti-TiB metal matrix composite (MMC) manufactured by PTA-SFFF. This investigation includes rotating beam fatigue test, electron microscopy, and fatigue calculations. The fatigue experiments were performed at 350 ºC using specimen with the test axis oriented diagonally (45º) and parallel (90º) to the AM builds directions. The fatigue values from the current experiments along with literature data find that Ti MMC manufactured via PTA-SFFF exhibit fatigue anisotropy reporting highest strength in 90º and lowest in perpendicular (0º) AM build directions. Further, the electron microscopy investigations on 0º, 45º, and 90º AM build specimens reveal frequent TiB clusters in all three AM build directions and suggest that the spread of these TiB clusters play a role in fatigue anisotropy. Moreover, the fatigue calculations were performed using both the Paris’ and recently reported modified Paris’ equations. Comparison of R^2 values for these calculations show that modified Paris’ equation predicts the fatigue life of AM Ti-TiB MMC more accurately than the Paris’ equation.

Background: Mules are used worldwide for agrarian purposes such as plowing and harvesting crops. In this study, mules were used for plowing and cultivation. While mules are believed to be less susceptible to diseases and fatigue than horses, no scientific investigation has been conducted to support this belief. The objective was to assess effect of work-associated fatigue on hematological and biochemical parameters in working mules in Mexico. Methodology: Six healthy mules 6.5 to 23 years, 3.5 BCS, were studied. Three blood samples/day were taken at the beginning and end of the work season. One sample taken at the beginning of the day, middle, and end (3 hours apart). Biochemical parameters, including the concentrations of albumin, globulin, total protein, glucose, alkaline phosphatase (ALP), aspartate aminotransferase (AST), gamma-glutamyl transferase (GGT), total bilirubin, lactate, creatinine kinase (CK), urea, creatinine, calcium, sodium, potassium, total carbon dioxide (tCO2), and al-bumin-to-globulin ratio, were determined using the veterinary Skyla-VB1 automated analyzer (Lite-On Technology Corporation, Hsinchu-Taiwan), and blood lactate concentration using the handheld Lactate Scout Vet. Results: Significant increases in concentrations AST (P < 0.001), BUN (P < 0.001), calcium (P = 0.002), creatine phosphokinase CPK U/L (P < 0.001), tCO2 (P = 0.006), and urea (P < 0.01), were observed at the end of the work season. However, sodium, potassium, and chloride were significantly decreased at the end of the work season. No treatment or time-by-treatment interaction effect was observed for ALP, creatinine, globulin, or the albu-min-to-globulin ratio. Conclusions: The significant decrease in mineral and electrolytes (Na, K, and Cl) at the end of work season could suggest change in electrolytic balance during the strenuous plowing season. A higher concentration of tCO2 at end of the season is a good indicator of metabolic acid-base disturbances. Results indicate use of mules for plowing fields disrupts the mules' micromineral and electrolyte profiles. Increased CPK levels demonstrate that the workload was excessive. This study furthers our understanding of biochemical responses in mules.

The effect of defects and microstructure on mechanical properties of Ti-6Al-4V welds produced by tungsten inert gas welding, plasma arc welding, electron beam welding and laser beam welding was studied in the present work. The mechanical properties of the different weld types have been evaluated with respect to micro hardness, yield strength, ultimate tensile strength, ductility and fatigue at room temperature and at elevated temperature. Metallographic investigation was carried out to characterize the microstructures of different weld types and fractographic investigation to relate the effect of defects on fatigue performance. Electron and laser beam welding produced welds with finer microstructure, higher tensile ductility and better fatigue performance than tungsten inert gas welding and plasma arc welding. Large pores and pores located close to the specimen surface were found to be most detrimental to fatigue life.

This paper discusses the theoretical and experimental correlations between fatigue and static strength statistical distributions. We use a two-parameter residual strength model that obeys the qualitative Strenght-Life Equal-Rank (SLERA) assumption for guidance. The modeling approach consists of recovering the model's parameters by best fitting the constant amplitude (CA) fatigue data at a given stress ratio, R, and the experimental Weibull parameters of the static strength distribution function. Once the model's parameters are fixed, its capabilities, potential, and limits are discussed by comparing its predictions with residual strength and fatigue data obtained at different stress ratios, R. Moreover, from a preliminary analysis, the theoretical extension of the model's capabilities to variable amplitude loadings is conceptualized. The application of Miner's rule is also discussed and compared with a new damage rule to analyze the fatigue responses under variable amplitude loadings.

The aim of our study was to assess university students’ sleep quality and fatigue before and during the academic exam period and identify potential associated factors. A Web-based survey was completed by 940 students of 20 different Tertiary Institutions including demographics, sleep habits, exercise, caffeine, tobacco, alcohol use, subjective sleep quality (Pittsburgh Sleep Quality Index - PSQI) and fatigue (Fatigue severity scale – FSS) at the beginning of semester and at examination period. During exam period, PSQI (8.9 vs 6.1, p&lt;0.001) and FSS scores (36.9 vs 32.7, p&lt;0.001) were significantly elevated compared to pre-exam period. Increase of PSQI score was associated with age (β=0.111, p=0.011), presence of chronic disease (β=0.914, p=0.006), and depressive symptoms (β=0.459, p=0.001). Increase of FSS score was associated with female gender (β=1.658, p&lt;0.001), age, (β=0.198, p=0.010), increase in smoking (β=1.7, p=0.029), coffee/energy drinks consumption (β=1.988, p&lt;0.001), decreased levels of physical exercise (β=1.660, p&lt;0.001), and depressive symptoms (β=2.526, p&lt;0.001). In conclusion, our results show that sleep quality and fatigue are affected in university students during exam periods. Potential factors were identified which may lead to development of strategies for better quality of sleep, and wellbeing.

The influence of the austempering temperatures on the microstructure and mechanical properties of austempered ductile cast iron (ADI) was investigated. ADI is nodular graphite cast iron, which owing to higher strength and elongation exceeds mechanical properties of conventional spheroidal graphite cast iron. Such a combination of properties is achieved by the heat treatment through austenitization, followed by austempering at different temperatures. The austenitization conditions were the same for all the samples: temperature 890°C, duration 30min, and quenching in a salt bath. The main focus of this research was on the influence of the austempering temperatures (270°C, 300°C, and 330 C) on the microstructure evolution, elongation, toughness and fatigue resistance of ADI modified by certain amount of Ni, Cu, and Mo. The Vickers and Rockwell hardness decreased from 535.7 to 405.3HV/1 (55.7 to 44.5HRC) as the austempering temperature increased. Optical images showed the formation of graphite nodules and matrix composed of ausferrite; the presence of these phases was confirmed by an XRD diffraction pattern. A fracture surface analysis revealed several types of the mechanisms: cleavage ductile, transgranular and ductile dimple fracture. The stress-controlled mechanical fatigue experiments revealed that a 330°C austempering temperature ensures the highest fatigue life of ADI.

Future, flexible thermal energy conversion systems require new, demand-optimized high-performance materials. The High performance Ferritic (HiperFer) stainless steels, under development at the Institute of Microstructure and Properties of Materials (IEK-2) at Forschungszentrum Jülich GmbH in Germany, provide a balanced combination of fatigue, creep and corrosion resistance at reasonable price. This paper outlines the scientific background of alloy performance development, which resulted in an age-hardening ferritic, stainless steel grade. Furthermore, technological properties are addressed and the potential concerning application is estimated by benchmarking versus conventional state of the art materials.

The paper introduces a valuable new description of fatigue strength in relation to material properties and thus a new perspective on the overall understanding of the fatigue process. Namely, a relation between the endurance limits and the accompanying values of the critical resolved shear stress (CRSS) for various metallic materials has been discovered by means of a multiscale approach for fatigue simulation. Based on the uniqueness of the relation, there is a strong indication that it is feasible to relate the endurance limit to the CRSS, and not to the ultimate strength as often done in the past.

The Ti-6Al-4V alloy is widely used in the manufacture of components that should have low density, high corrosion resistance, and fatigue strength. The fatigue strength can be improved by surface modification. The aim of this study was to determine the influence of plasma nitriding on the fatigue behavior of Ti-6Al-4V alloy with a lamellar microstructure (Widmanstätten type). Nitriding was executed at 720 °C for 4 hours in an atmosphere with N₂, Ar and H₂. Samples microstructure characterization was carried out by X-ray diffraction analysis, optical microscopy and scanning electron microscopy. The average roughness of the specimens was determined, and fatigue tests were executed in a bending-rotating machine with reverse tension cycles (R= -1). X-ray diffraction analysis revealed the matrix phases α and β, and the phases Ɛ-Ti₂N and δ-TiN in the nitrided alloy. A nitrogen diffusion layer was formed between the substrate and the titanium nitrides. Plasma nitriding resulted in an increase in low cycle fatigue strength, whereas at high cycles, both conditions exhibit similar behavior. The fracture surface of the fatigue tested specimens clearly revealed the lamellar microstructure. The fracture mechanism appears to be due to cracking at the interface of α and β phases of the lamellar microstructure.

The fatigue strength of the hot work steel depends on various factors, including the mechanical, properties and behavior and bulk and the surface under layer, the microstructural features as well as heat treatments. The influence of a series of heat treatments on the fatigue strength of H13 hot work steel was investigated. Different preheating, quenching and tempering treatments were applied to four sets of specimens and fatigue tests were conducted at room temperature using a rotating bending test machine. All heat treatments resulted in a certain improvement of the fatigue strength. Highest fatigue strength obtained by applying a double tempering heat treatment (first tempering at 550 °C for two hours and second tempering at 610 °C for two hours) after initial preheating and quenching. One tempering treatment (550 °C for two hours after preheating and quenching) did not significantly improve the fatigue strength.

In this study, we investigate the influence of control type and strain rate on the lifetime of specimens manufactured from 50CrMo4. This influence is described by a strain rate dependent method that uses cyclic stress strain curves to correct displacement controlled cyclic test results. The objective of this correction is to eliminate the stress related differences between displacement controlled cyclic test results and force controlled cyclic test results. The method is applied to the results of ultrasonic fatigue tests of six different combinations of heat treatment, specimen geometry (notch factor) and atmosphere. The corrected results show an improved agreement with test results obtained on conventional fatigue testing equipment with similar specimens: the standard deviation in combined data sets is significantly reduced (p=4.1%). We discuss the literature on intrinsic and extrinsic strain rate effects in carbon steels.

Adolescents most often experience mild acute COVID-19 but may still face fatigue and persistent symptoms such as post-COVID-19 condition (PCC) and post-infective fatigue syndrome (PIFS). We explored the fecal microbiota in a prospective controlled cohort of 136 non-hospitalized SARS-CoV-2-positive and 32 SARS-CoV-2-negative controls aged 12–25 years. With a targeted qPCR approach, the quantities of 100 fecal bacterial taxa were measured at baseline (early convalescent stage) and after six months. Results: Faecalibacterium prausnitzii M21.2 and Gemmiger formicilis (both p&lt;0.001) were enriched in the SARS-CoV-2-positive participants compared to controls at baseline. Lower baseline abundance of Faecalibacterium prausnitzii M21/2 (p=0.013) and higher abundance of Clostridium spiroforme (p=0.006), Sutterella wadsworthensis (p&lt;0.001) and Streptococcus thermophilus (p=0.039) were associated with six-month fatigue. Sutterella wadsworthensis and Streptococcus thermophilus enrichment was additionally associated with PCC in the SARS-CoV-2-positive group (p&lt;0.001 and 0.042 respectively). Conclusions: In mild SARS-CoV-2 infection in adolescents and young adults, beneficial Faecalibacterium prausnitzii M21/2 and Gemmiger formicilis were enriched compared to SARS-CoV-2 negative controls. Additionally, both known (Faecalibacterium prausnitzii, Streptococcus thermophilus) and new (Clostridium spiroforme, Sutterella wadsworthensis) bacteria were associated with persistent symptoms in the COVID-19 infected group, warranting further exploration of the role of these bacteria in COVID-19 disease and PCC pathophysiology.

In this paper, we investigate the effects of mean stress, multiaxial loading, and residual stresses on the fatigue life of springs. We study the fatigue life of a homogeneously stressed material subjected to cyclic loading with nonzero mean stress. Traditional methods for estimating fatigue life are based on Goodman and HAIGH diagrams. The formal analytical descriptions, namely "stress-life" and "strain-life" approaches, are found to be more suitable for the numerical methods. The fatigue analysis method described above, which describes crack growth per cycle, is extended. The extensions allow consideration of the mean stress of a load cycle. Closed-form expressions for crack length versus number of cycles are derived. The complementary effects on the fatigue life of springs, which ultimately have a significant influence on the fatigue life of springs, are summarized. For the proposed unified fatigue life functions, the ranges for the stress loading factor are extended by introducing the effective stress intensity. The solution leads to the factor range for the effective stress intensity, the effective mean value of the stress intensity factor and the effective stress ratio. The developed method assumes the homogeneous stress state in the whole spring element. For the non-homogeneously loaded structural elements, the weak-link concept is applied to account for fatigue.

In the Netherlands, the assessment of existing prestressed concrete slab-between-girder bridges showed that the thin, transversely prestressed slabs may be critical for static and fatigue punching when evaluated using the recently introduced Eurocodes. On the other hand, compressive membrane action increases the capacity of these slabs and changes the failure mode from bending to punching shear. To improve the assessment of the existing prestressed slab-between-girder bridges in the Netherlands, two 1:2 scale models of an existing bridge, the Van Brienenoord Bridge, were built in the laboratory and tested monotonically as well as under cycles of loading. The result of these experiments is: 1) the static strength of the decks, showing that compressive membrane action significantly enhances the punching capacity, and 2) the Wöhler curve of the decks, showing that compressive membrane action remains under fatigue loading. The experimental results can then be used for the assessment of the most critical existing slab-between-girder bridge. The outcome is that the bridge has sufficient punching capacity for static and fatigue loads, and thus that the existing slab-between-girder bridges in the Netherlands fulfil the code requirements for static and fatigue punching.

To reduce weight and simplify maintenance, ship structures frequently include openings and cut-outs. While these features offer practical advantages, they can weaken the structural integrity of key components. This study explores the effects of these geometric discontinuities on the double-bottom floor plates of a Panamax-class container ship under axial and transverse loads. Through numerical simulations and experimental testing, we analyzed different cut-out configurations and stiffening strategies to assess their impact on stress distribution, plate thickness and fatigue behavior. The results reveal that side cut-outs significantly increase stress, particularly under transverse loads, while central openings have less impact. Additionally, increasing plate thickness consistently reduces stress levels across all models, improving structural durability. Fatigue analysis shows that certain stiffening configurations, particularly those with longitudinal stiffeners in the bottom plates, enhance fatigue life. These findings offer critical design insights for optimizing hull structures, balancing weight reduction with strength improvement. The study provides valuable recommendations for reducing stress concentrations and extending the fatigue life of ship components, contributing to more efficient and safer ship designs.

Compassion fatigue and burnout are two distinct forms of mental health distress faced by educational workers. Researchers have shown a high level of both phenomena across the field of education, however, a better understanding of what educational workers already do for positive mental and emotional health is needed. This research study examined three years of data, collected via survey, inquiring into the various interventions, namely supports and resources, that educational workers, specifically teachers, educational assistants, school leaders, and support administrators , use to support positive mental health. Quantitative data analysis via descriptive and inferential statistics revealed that educational workers relied heavily on their personal support network followed distantly by medical professionals and other interventions revealing a gap that needs to be addressed by employers. Qualitative thematic analysis revealed a trend towards increased use of environmental interventions to promote positive mental health. Suggestions for other interventions that might be helpful are provided.

With the improvement of computer, artificial intelligence, information technology and other technical levels, the relationship between man-machine environment systems is more complicated and diversified. The optimization, iteration and development of the new generation of intelligent equipment system and human-computer interaction interface put forward higher requirements for ensuring the safety of personnel, improving the efficiency of human-computer interaction and improving the efficiency of the system. Such as intelligent cabin adaptive cognitive decision aid system, how to adopt intelligent information display and human-computer interaction, optimize information processing, strengthen situational awareness; How to effectively present information and improve the efficiency of human-computer interaction, so that the system has good security, applicability and maximize its effectiveness; How to deal with man-machine matching and man-machine collaboration problems, so as to improve the efficiency of man-machine/unmanned collaborative work. Human factors throughout the life cycle of equipment systems must be fully considered. The human factor is considered in the system design, so that people, machines and the environment can work together and adapt to each other, so as to achieve benign interaction and feedback between people and equipment and interface and complete the full transmission and communication of human-machine intelligent interaction information. The development of new aircraft human-computer interaction systems combined with new technological methods has also gradually changed the role of pilots and staff. From the system operator gradually into the monitor and decision maker, especially with the improvement of the degree of intelligent flight, information technology, advanced complex airborne equipment is increasing, the amount of information that operators need to deal with is also increasing, and the allowed time for judgment and decision is very short, and the mental resources that pilots bear are gradually rising. As the mental load is a key factor affecting the allocation of cognitive tasks, when encountering emergency situations, the mental load overload caused by the increase of information processing tasks often occurs, which seriously affects the task performance of operators, physical and psychological comfort and flight safety, and thus affects the efficiency and safety of the entire aircraft man-machine system. This requires us to conduct real-time analysis of human-computer interaction situational awareness, especially the individual cognitive state as an uncontrollable factor.

Wind energy is one of the main drivers of the renewable energy market. The wind turbine gearbox, used as a multiplier - is one of the main components directly related to wind turbine efficiency and lifespan. Therefore, the strict control of the gearbox project and its manufacturing processes or even minor improvements in this component heavily and positively impact energy production/generation over time. This work diagnoses a 1.6 MW gearbox fracture mechanics to identify its main reason and how the chain of events took place, leading to the catastrophic failure. The diagnoses underwent numerical simulation (Finite Element Analysis - FEA) and further analysis of the lubrication system, bearings, planetary stage gears, helical stage gears, and high-speed shaft. In conclusion, although the numerical simulation showed high contact stresses between the teeth, the region with the crack nucleated was the top land (tip of the tooth). The most likely factors that led to the premature failure were the missed lubrication for the planetary bearings, lack of gear raw material cleanliness, and excessive case depth at the tip of the sun shaft gear teeth. With the sun gear, planet bearings, and planet gears broken in pieces, those small and large pieces dropped into the oil, between the gears, and into the tooth ring, ending up as a premature gearbox failure.

Objective: This research was aimed to estimate the anti-fatigue effects of arecoline and elucidate its underlying mechanisms using a murine model of central fatigue precipitated by sleep deprivation (SD). Methods: Seventy-two male C57BL/6 mice were randomly allocated into six groups: a control group, a SD-induced fatigue model group, a group receiving Rhodiola Rosea capsules (2.5 mg/kg), and arecoline groups administered low, medium, and high doses (10, 20, and 40 mg/kg, respectively). Following 28 days of continuous administrations, the effects of arecoline on the mouse fatigue-related behaviors was assessed by the behavioral tests, including grip strength, rotarod performance, and weight-bearing swimming endurance. Enzyme-linked immunosorbent assays (ELISAs) were utilized to measure the levels of the relevant biochemical markers. Western blotting was employed to quantify the expression of nuclear factor erythroid 2-related factor (Nrf2), Kelch-like ECH-associated protein 1 (Keap1), heme oxygenase 1 (HO-1), sequestosome-1 (p62), and NADPH quinone oxidoreductase 1 (NQO1) in the gastrocnemius muscle. Results: Arecoline administration notably enhanced grip strength, delayed the onset of fatigue as evidenced by extended latencies in rotarod tests, and increased the duration of weight-bearing swimming in mice. In the elevated plus maze, arecoline significantly reduced both the number of entries and the total distance traveled in the open arms. Arecoline markedly decreased serum levels of creatine kinase, blood urea nitrogen, lactate dehydrogenase, triglycerides, and cholesterol, while elevated total testosterone, lactate dehydrogenase, and immunoglobulin G levels. Furthermore, it significantly increased superoxide dismutase(SOD), catalase(CAT), and glutathione peroxidase activity in the gastrocnemius muscle, reduced malondialdehyde levels, augmented hippocampal SOD and CAT activity, and elevated glycogen stores in both liver and muscle tissues. Neurotransmitter levels were significantly increased, cytokine levels were markedly reduced, and the expression of Nrf2, Keap1, NQO1, p62, and HO-1 in brain tissue was significantly upregulated. Conclusion: The current study for the first time demonstrated that arecoline has significant anti-fatigue activity, and its mechanism of action is related to elevate the levels of glucose and lipid metabolism, relieve oxidative stress damage, inhibit neuroinflammatory response, regulate neurotransmitter levels and Keap1/Nrf2/HO-1 signaling pathway. The current study provides a new insight into the potential of arecoline in prevention and improvement of fatigue.

As a new type of high-performance material, gradient structural steel is widely used in engineering fields due to its unique microstructure and excellent mechanical properties. For the prevalent fatigue failure problem, the rate of change of the local grain size gradients along the structure (referred to as the gradient rate) is a key parameter in the design of gradient structures, which significantly affects the fatigue performance of gradient structural steel. In this work, a method of ‘Voronoi primary + secondary modeling’ is adopted to successfully establish three typical high-strength steel models corresponding to the convex, linear, and concave type gradient rates for gradient structures, focusing on the stress-strain response and crack propagation in structural steel with different gradient rates under cyclic loading. It is found that the concave gradient rate structural model is dominated by finer grains with larger volume fraction, which is conducive to hindering fatigue crack propagation and has the longest fatigue life; the linear structure is the second one, and the convex structure is the shortest one. The simulation results in this work are consistent with the relevant experimental phenomena. Therefore, when regulating the gradient rate, priority should be given to increasing the volume fraction of fine grains and designing a gradient rate structure dominated by fine grains to improve the fatigue life of the material.

This study investigates the effects of ambient illumination and negatively polarized text color on visual fatigue, exploring the issue of visual fatigue when using visual display terminals in low-illumination environments. The research methodology utilized an experimental design to collect data on changes in pupil accommodation and blink rate through an eye tracker. Partici-pants completed a reading task while exposed to various text colors and ambient light conditions to evaluate visual fatigue and cognitive performance. The study's findings suggest that text color significantly affects visual fatigue, with red text causing the highest level of visual fatigue and yellow text causing the lowest level of visual fatigue. Improvements in ambient lighting reduce visual fatigue, but the degree of improvement varies depending on the text color. Additionally, cognitive performance is better when using yellow and white text but worse when using red text. Yellow text is the most effective choice for reducing visual fatigue under negative polarity. In-creasing ambient lighting can also improve visual fatigue in low-illumination conditions. These findings will offer valuable guidance for designing visual terminal device interfaces, especially for low-illumination or night environments, to minimize visual fatigue and improve the user ex-perience.

Self-report measurement is frequently used in human sports to assess training adaptations [1, 2]. This is a technique novel to the equestrian sport. The aim of this study was to describe how elite event riders of Germany evaluate their own fitness as well as that of their horses for the entire duration of an eventing season. Additionally, correlations with possible influencing external factors such as type of training or duration of grazing were also investigated. Short online questionnaires were used to allow eight riders to describe the training of their horses. Five criteria (general performance, ability to concentrate, general state of mind, general muscular condition and emotional wellbeing) were used to assess both, their horse's, as well as their own wellbeing. A 1-10 rating scale was used to score each criterion resulting in an average of 38 points out of 50 (maximum wellbeing) for horse (Std. dev. 0.55) and rider (Std. dev. 0.65) respectively. A total of 120 questionnaires were analysed. A correlation could be demonstrated (Spearman's correlation coefficient = 0.5) between rider and horse score, whereby it only became a linear correlation above 30 points. In addition, the horse score correlates positively with its success at competitions. While the horses were rated similarly throughout the season, the riders’ perceived welfare was higher in the middle of the season compared with the beginning and end of the season. Regularly turned-out horses resulted in higher horse scores (Linear mixed model, p=0,04, n=120). It can be concluded that the self-report measurement of fatigue and wellbeing can be a useful tool for trainers and riders to better determine the horse’s fatigue and recovery. It should be noted that external factors influence both, rider and horse assessment.

The present study focuses on the investigation of fatigue, social support and quality of life that characterizes social workers. Furthermore, the study aims to highlight the effect of demographic and occupational characteristics on the above factors. A total of 400 social workers with an average age of 39.05 years took part in the research. Most were women, single, residents of cities of more than 100,000, and health care workers. Participants were asked to answer online questionnaires (FAS for fatigue, MSPSS for social support and GHQ-28 for quality of life). From the analysis of the data, it was found that the level of fatigue of the social workers is at low levels. At the same time, the level of occurrence of negative symptoms is also low, with physical symptoms appearing more often than the rest. Participants receive a high level of support from their environment, and more so from the "significant other" in their life. Finally, it was found that the fatigue, social support and quality of life of social workers is affected by the age of the social workers, the total years of service, gender, marital status, place of residence, employer and position of responsibility.

The high demands of caring for and raising a child with autism spectrum disorder on a daily basis fatally lead parents to the appearance of physical and mental fatigue. This study aimed to assess the effect of social support and spirituality on the fatigue of parents with children with autistic spectrum disorder. A cross-sectional study with a convenience sample was conducted in Schools of Special Education in Attica (Greece). The sample consisted of 123 parents who completed The Fatigue Assessment Scale (FAS), the Multidimensional Scale of Perceived Social Support (MSPSS), and the Functional Assessment of Chronic Illness Therapy Spiritual Well-Being Scale (FACIT Sp-12) to measure the levels of fatigue, social support, and spirituality, respectively. Demographic data were, also, recorded. Data analysis was applied using IBM SPSS 21.0. The mean age was 47.3 years old, 81.3% were women, and 38.9% stated much / very much religious. The mean of total FAS was 28.4 (SD±7.5), of total FACIT Sp-12 was 31.5 (SD±8.7), and of total MSPSS 5.1 (SD±1.1). Higher levels of total MSPSS and FACIT Sp-12 were associated with lower total FAS (r= -0.50, p &lt;0.001 and r= -0.49, p&lt;0.001 respectively). Social support and spirituality are significant predictors of fatigue.

The purpose of this study was to identify subgroups of quality of life (QOL) changes in breast cancer survivors (BCS) and to determine factors associated with subgroups of consistently low or deteriorated QOL. We enrolled 101 women recently diagnosed with breast cancer in South Korea and asked them to complete a questionnaire at baseline (within 1 month of diagnosis), 1 year later (Year 1), 2 years later (Year 2), and 3 years later (Year 3). We assessed QOL using the global QOL subscale from the EORTC QLQ-C30. We defined low QOL as a global QOL score 10 points below the mean score of the general population. Based on low QOL as defined in this study, we identified subgroups of QOL changes over 3 years. We identified four subgroups of QOL changes: improved (47.4%), stable (30%), continuously low (8.8%), and deteriorated (13.8%) and considered the last two categories (22.6%) as poor QOL. Logistic regression analyses demonstrated that significant determinants of poor QOL were insomnia at Year 1, fatigue and anxiety at Year 2, and fatigue, depression, and comorbidity at Year 3. In conclusion, persistent symptoms of insomnia, fatigue, anxiety, depression, and comorbidity are potential risk factors for poor QOL in BCS.

A model to rationalize the effects of test temperature and microstructural variables on the creep crack growth (CCG) and creep-fatigue crack growth (CFCG) rates in ferritic steels is described. The model predicts that as the average spacing between grain boundary particles that initiate creep cavities decrease, the CCG and CFCG rates increase. Further, CCG data at several temperatures collapse into a single trend when a temperature compensated CCG rate derived from the model is used. CCG and CFCG behavior measured at different temperatures is used to assess the effects of variables such as differences between basemetal (BM), weldmetal (WM) and the heat-affected zone (HAZ) regions. The model is demonstrated for Grade 22 and Grade 91 steels using data from literature. It is shown that differences between the CCG behavior of Grade 22 steel in new and ex-service conditions are negligible in the BM and WM regions but not in the HAZ region. The CCG behavior of Grade 91 steels can be separated into creep-ductile and creep-brittle regions. The creep-brittle tendency is linked to the presence of excess trace element concentrations in the material chemistry. Significant differences found in the CCG rates between BM and the WM and HAZ regions of Grade 91 steel were explained.

Intestinal microbiota attracts daily attention of a growing number of study which have attempted to link gut dysbiosIs with a variety of disease states: irritable bowel syndrome (IBS), inflamed bowel disease (IBD), Crohn's disease (CD), leaky gut syndrome (LGS), food intolerance, diabetes, metabolic syndrome, cancer, etc.. In our study we analyzed how intestinal dysbiosis may be related to chronic fatigue syndrome (CFS) and depression through the exchange of information through the gut-brain axis (GBA). We studied 33 subjects, 13 males and 20 females, who reported CFS or/and depression: we investigated their salivary cortisol levels, blood serotonin, omega 3/6 ratio, intestinal dysbiosis (calculated on the urinary levels of indoxyl sulfate and skatole), and we looked for the presence of Candida a. or mycetes in the stool; the data accumulated with this research show a correlation between the presence of Candida a./miceti, indoxyl sulfate urine values beyond the physiological and low serotonin levels. In addition, data analysis showed that the EPA/DHA values also show pro-inflammatory levels in case of dysbiosis and low serotonina levels. The relationship, however, with cortisol levels requires further research although this study showed a statistically significant positive correlation between these values, measured at specific times, and serotonin levels. Aims its connections with We investigated the relationship between stress (evaluated through the measurement of salivary cortisol levels) and gastrointestinal efficiency measured as a function of intestinal fermentative and putrefactive dysbiosis, evaluating the levels of urinary indoxyl sulfate in the first case (a possible correlation with the presence of Candida spp or Mycetes in the subjects feces was investigated), urinary skatole levels in the second one, in patients with chronic fatigue syndrome (SFC) and depression. In these patients we also have studied omega 3/6 ratio, and finally we have analized the impact that the alteration of these parameters can have on the serotonin levels. This research attemps to highlight the contact points, in some cases not so obvious, among these topics, contact points that, although they give us interesting indications, show the need to be further deepened by analyzing a larger amount of data.

Electricity generation from renewable energy sources is emerging as a result of global carbon emission reduction policies. However, most renewable energy sources are non-dispatchable and cannot be adjusted to meet the fluctuating electricity demands of society. A flexible operation process has been proposed as an effective solution to compensate for the unstable nature of renewable energy sources. Thermal load fluctuations during flexible operation may cause creep-fatigue damage to the high-temperature components of thermal power plants, as they are designed with a focus on creep damage under a constant power level. This study investigated the residual life of high-temperature components, such as a superheater tube and a reheater header, to failure under flexible operation conditions using finite element analysis and empirical models. First, we determine an analytical solution for the straightened superheater tube under thermal conditions and compare it with the numerical solution to verify the numerical models. Through the verified finite element model, the creep-fatigue life of the reheater header is estimated by considering flexible operation factors and employing the Coffin-Manson and Larson-Miller models. Although fatigue damage increases with decreasing minimum load and ramp rate, we confirmed that creep damage significantly affects the residual life during flexible operation. In addition, a surrogate model was proposed to evaluate the residual life of the reheater as a function of the flexible operation factors using the machine learning methodology, based on the results of finite element methods. It can be used to predict its residual life without performing complex thermal-structure analysis and relying on empirical models for fatigue and creep life. We expect our findings to contribute to the efficient operation of thermal power plants by optimizing the flexible operation factors.

This study investigates the power production and blade fatigue of a three-turbine array subjected to active yaw control (AYC) in full-wake and partial-wake configurations. A framework of two-way coupled large-eddy simulation (LES) and aeroelastic blade simulation is applied to simulate the atmospheric boundary-layer (ABL) flow through the turbine array and the structural responses of the turbine blades. Mean power outputs and blade fatigue loads are extracted from the simulation results. By exploring the feasible AYC decision space, we find that (a) in the full-wake configuration, the local power-optimal AYC strategy with positive yaw angles endures less flapwise blade fatigue and more edgewise blade fatigue than the global power-optimal strategy; (b) in the partial-wake configuration, applying positive AYC in certain inflow wind directions achieves higher optimal power gains than that in the full-wake scenario and reduces the blade fatigue from the non-yawed benchmark. Through a theoretical analysis based on the blade element momentum theory, we reveal that the aforementioned differences in flapwise blade fatigue between the positively and negatively yawed turbine are due to the differences in the azimuthal distributions of the local relative velocity on blade sections, resulting from the combined effects of vertical wind shear and blade rotation. Furthermore, the difference in the blade force between the positively and negatively yawed front-row turbine induces different wake velocity and turbulence distributions, causing different fatigue loads on the downwind turbine exposed to the wake.

This article presents an experimental approach to fatigue testing of cableway gondolas, carried out in accordance with the EN 13796-3 standard. Due to the limitations of the aforementioned regulations and the lack of clarity in their content, when designing and conducting fatigue tests of gondolas, there is a need to find solutions that meet the normative requirements, while ensuring the cost-effectiveness of the tests. The work presents the method of loading, receiving the degrees of freedom, the methodology of gondola strength verification, and additional suggestions allowing for the satisfactory preparation of a plan of fatigue tests and their implementation. The paper shows problems and ways to solve it, what may occur during cableway gondolas fatigue test design. The research object is a 6-seater gondola designed by TRANSSYSTEM S.A. with its registered office in Wola Dalsza (Poland).

(1) Background: Recent studies provide some evidence for the contribution of antibody-mediated autoimmune mechanisms to the nature of fibromyalgia (FM) and myalgic encephalomyelitis/chronic fatigue syndrome (ME/CFS). Much attention was paid to the autoantibodies (AAb) targeting G protein-coupled receptors as natural components of the immune system. However, natural AAb network is much more extensive, and has not been previously investigated in these disorders; (2) Methods: The enzyme immunoassays ELI-Viscero-Test and ELI-Neuro-Test were used to determine changes in serum content of a 33 natural AAb to neural, organ-specific and non-tissue-specific autoantigens a) in 11 FM patients with comorbid ME/CFS; b) in 11 ME/CFS patients without FM; c) in 11 healthy controls. Individual autoantibody profiles and their correlation with some clinical symptoms were analyzed. (3) Results: both patients with ME/CFS and ME/CFS+FM were characterized by more frequent and pronounced deviations in the immunoreactivity to GABA-receptors than healthy controls. Although the level of other natural AAb did not differ between study groups, AAb correlation signatures were changing in patients compared to healthy controls. Both in patients and healthy controls the level of natural AAb to various neural and tissue-specific antigens correlated with the severity of fatigue, bodily pain, depression, anxiety, physical and mental-health related quality of life. Notably, that widely different correlation patterns were observed between study groups. (4) Conclusions: Findings from this pilot study provide some evidence that the homeostasis of autoimmune relationships, which are possibly a physiological part of our immune system, may break down in FM and ME/CFS. The correlation of disease-induced perturbations in individual AAb profiles with some clinical symptoms may arise from the immune system's ability to reflect qualitative and quantitative changes in antigenic composition of the body.

Fatigue cracks in a wide array of industrial components and structures pose a significant threat to their integrity. Detecting fatigue cracks using ultrasonic inspection techniques is a widespread activity for economic reasons but there are limitations to the techniques due to the morphology of fatigue cracks. In addition to detection there is a need to measure the size of the cracks which are often within the volume of the material. Ultrasonic techniques are well-suited to look inside the volume of the material but achieving sufficient sensitivity to the tip of the cracks in particular is practically difficult. Without an accurate knowledge of where the tip of the crack lies there can be significant uncertainty in sizing measurements. Machine Learning (ML) techniques are being developed to aid in the inspection and monitoring tasks but presenting the ultrasonic data in a suitable way for machine learning is very important. This paper presents a new approach to condition the ultrasonic data for machine learning settings so that they can be used effectively and confidently to detect and size fatigue cracks. The new approach, using images termed parameter-spaces, will also aid in conventional inspections as they are able to give information to human operators as to the existence or not of these very dangerous cracks.

Despite recent advances in immune-modulatory drugs, pharmacological therapies have been proven ineffective in severe presentations of multiple sclerosis (MS), including secondary progressive MS. At present, therapeutic interventions' performance is primarily focused on ameliorating symptoms to improve the patient's quality of life. Among complementary treatments, nutrition has been considered a decisive factor to control symptoms and enhance the wellness of MS patients. Although no special diets are associated with MS, the impact of diet and dietary supplements on the course of progressive forms of the disease have been studied during the last years. Fatigue is among the most common and disabling symptoms reported by MS patients. Fatigue has been defined in the Multiple Sclerosis Council for Clinical Practice Guidelines (MSCCPG, 1998) as a "subjective lack of physical and/or mental energy that the individual perceives as an interference with habitual and desired activities". This study aimed to compare the psychometric functioning of the "Fatigue Severity Scale" (FSS) and the "Modified Fatigue Impact Scale" (MFIS) in our sample of people with MS. Specifically, during chronic treatment, the change in these two parameters with two vitamin-rich dietary supplements (Citozym® and Ergozym®) was evaluated. The impact of these nutritional supplements revealed differences in antioxidant and anti-inflammatory parameters between treatment groups with subsequent improvement in fatigue. In conclusion, the results obtained have confirmed the effectiveness of complementary nutritional therapies, evaluated essentially based on hematological biomarkers, through which it is possible to act on disability to improve the quality of life of MS patients.

Chronic fatigue and fibromyalgia symptoms frequently occur in major depressive disorder (MDD). The pathophysiology of these symptoms may in part, be ascribed to activated immune pathways, although it is unclear whether muscular factors play a role in their onset. The aim of the present study is to examine the role of muscle proteins in major depression in association with symptoms of chronic fatigue and fibromyalgia. We measured serum levels of agrin, talin-2, titin, and creatine phosphokinase (CPK) as well as the FibroFatigue (FF), the Hamilton Depression Rating Scale (HAM-D) and the Beck Depression Inventory (BDI-II) in 60 MDD patients and 30 healthy controls. The results show a significant increase in agrin and talin-2 in MDD patients as compared with controls. There were highly significant correlations between agrin and HAM-D, BDI-II and FF scores. Agrin, but not talin or titin, was significantly and positively associated with all 12 items of the FF scale. We found that a large part of the variance in HAM-D (47.4%), BDI-II (43.4%) and FF (43.5%) scores was explained by the regression on agrin, smoking, female sex (positively associated) and education (inversely associated). CPK was significantly and inversely associated with the total FF score and with muscle and gastro-intestinal symptoms, fatigue, a flu-like malaise, headache and memory, autonomic and sleep disturbances. These results suggest that aberrations in neuromuscular (NMJs) and myotendinous junctions may play a role in MDD and that the aberrations in NMJs coupled with lowered CPK may play a role in symptoms of chronic fatigue and fibromyalgia in MDD. Moreover, the increase of agrin in MDD probably functions as part of the compensatory immune-regulatory system (CIRS).

Objective: To examine associations between IgA responses to Gram-negative gut-commensal bacteria and peri-menstrual symptoms and sex hormone levels during the menstrual cycle in women with and without premenstrual symptoms. Methods: Forty women aged 18-45 years completed the Daily Record of Severity of Problems (DRSP) during all 28 consecutive days of the menstrual cycle. We assayed, in plasma,, IgA responses to 6 Gram-negative bacteria, i.e. Hafnei alvei, Pseudomonas aeruginosa, Morganella morganii, Klebsiella pneumoniae, Pseudomonas putida and Citrobacter pylori, progesterone and oestradiol at days 7, 14, 21 and 28 of the menstrual cycle. Results: Significant changes in Δ (actual minus one week earlier) IgA to LPS of the 6 Gram-negative bacteria during the menstrual cycle were observed with peak IgA levels at T4 (day 28) and lows at T1 or T2 (day 7 or 14). The Δ IgA changes in H. alvei, M. Morganii, P. putida during the menstrual cycle were significantly and positively associated with changes in the total DRSP score, and severity of physio-somatic, anxiety and breast-craving, but not depressive, symptoms. The changes in IgA responses to LPS were largely predicted by changes in progesterone and steady-state levels of progesterone averaged over the luteal phase. Discussion: Menstrual cycle-associated changes in IgA directed against LPS and by inference bacterial translocation may be driven by effects of progesterone on transcellular, paracellular and vascular pathways thereby contributing to the severity of physio-somatic and anxiety symptoms as well as fatigue, breast swelling and food cravings.

Background: It is unknown whether lowered steady state levels of sex hormones coupled with changes in those hormones during the menstrual cycle could be associated with the presence and severity of premenstrual syndrome (PMS).Objective: To examine associations between levels of progesterone and oestradiol during the menstrual cycle and PMS severity considering different diagnostic criteria for PMS.Methods: Forty women aged 18-45 years with a regular menstrual cycle completed the Daily Record of Severity of Problems (DRSP) for all 28 consecutive days of the menstrual cycle. Blood was sampled at days 7, 14, 21 and 28 to assay oestradiol and progesterone. Results: We developed a new diagnosis of peri-menstrual syndrome, which is characterized by increased DRSP severity in pre and post-menstrual periods and increased scores on the major DRSP dimensions, i.e. depression, physio-somatic symptoms, breast tenderness and appetite, and anxiety. This new diagnosis performed better than classical diagnoses of PMS, including the one presented by the American College of Obstetricians and Gynecologists. Lowered steady state levels of progesterone, when averaged over the menstrual cycle, together with declining progesterone levels during the luteal phase predict severity of peri-menstrual symptoms. Steady state levels of oestradiol and declining oestradiol levels during the cycle are also related to DRSP severity although most of these effects appeared to be mediated by progesterone. Conclusion: A significant increase in menstrual-cycle related symptoms can best be conceptualized as “peri-menstrual syndrome” and may result from “corpus luteum insufficiency”, which may result from suboptimal pre-ovulatory follicular development. Future research should trial Clomiphene citrate (given the first 5 days of the cycle) and a mid-cycle injection of human Chorionic Gonadotrophin in subjects with peri-menstrual syndrome.

There are many welded structures in the world such as bridges and viaducts that are subject to fatigue. These structures, generally made of non-alloy or low-alloy steels, have been put into operation some of them with many years ago and have accumulated a large number of variable load cycles over the time. For this reason the occurrence of fatigue phenomenon is inevitable and consists in the occurrence of failures at stresses applied to the structure, below the yield limit of the material. These stresses under the static loads would not cause the failures to appear..This paper will investigate whether two reconditioning techniques “weld toe grinding” and “WIG remelting weld toe”, influences favorably the behavior of welded structures made from HSLA steel, in static and variable loads and therefore if the application of these techniques is justified in both cases. In the paper will be presented the chemical composition and mechanical properties of the base and filler materials, micro and macrostructures, graphics with the variation of microhardness, static and fatigue tensile tests will be performed, and it will be rised durability curve in case of fatigue tests.

Medium-carbon steel is commonly used for the rail, wire ropes, tire cord, cold heading, forging steels, cold finished steel bars, machinable steel and so on. Its fatigue behavior analysis and fatigue life estimation play an important role in the machinery industry. In this paper, the estimation of fatigue life of medium-carbon steel with different surface roughness using established S-N and P-S-N curves is presented. To estimate the fatigue life, the effect of the average surface roughness on the fatigue life of medium-carbon steel has been investigated using 75 fatigue tests in three groups with average surface roughness (Ra): 0.4μm, 0.8μm, and 1.6μm respectively. S-N curves and P-S-N curves have been established based on the fatigue tests. The fatigue life of medium-carbon steel is then estimated based on Tanaka-Mura crack initiation life model, the crack propagation life model using Paris law, and material constants of the S-N curves. 6 more fatigue tests have been conducted to validate the presented fatigue life estimation formulation. The experimental results have shown that the presented model could estimate well the mean fatigue life of medium-carbon steel with different surface roughness

Myalgic Encephalomyelitis/Chronic Fatigue Syndrome (ME/CFS) is a complex disease characterized by profound fatigue, post-exertional malaise (PEM), and neurocognitive dysfunction. Immune dysregulation and gastrointestinal symptoms are commonly observed in ME/CFS patients. Despite affecting approximately 0.89% of the general population, the underlying pathophysiological mechanisms remain poorly understood. This study aimed to elucidate the relationship between immunological characteristics and intestinal barrier function in ME/CFS patients. ME/CFS patients were stratified into two groups based on their immune competence. After documentation of detailed medical records, serum and plasma samples were collected for assessment of inflammatory immune mediators and biomarkers for intestinal barrier integrity by ELISA. We found reduced complement protein C4a levels in immunodeficient ME/CFS patients suggesting a sub-group specific innate immune dysregulation. ME/CFS patients without immunodeficiencies exhibit a mucosal barrier leakage, as indicated by elevated levels of Lipopolysaccharide-binding protein (LBP). Stratifying ME/CFS patients based on immune competence enabled the distinction of two subgroups with different pathophysiological patterns. The study highlights the importance of emphasizing precise patient stratification in ME/CFS, particularly in the context of defining suitable treatment strategies. Given the substantial health and socioeconomic burden associated with ME/CFS, urgent attention and research efforts are needed to define causative treatment approaches.

Epoxy asphalt (EA) concrete is widely used in constructing long-span steel bridge pavements (SBDPs). This study aims to derive a fatigue damage evolution law, conducting an experimental investigation of SBDP. First, a general theoretical form of the fatigue damage evolution law of materials is established based on the thermal motion of atoms. Then, fatigue experiments demonstrate that this evolution law well represents the known damage–life relationships of SBDP. Taking into account the experimental relationships between damage and fatigue life under symmetrical cyclic loadings with different overload amplitudes and temperature variations, a detailed damage evolution law is deduced. Finally, the role of damage accumulation is discussed on the basis of the proposed damage evolution law for the extreme situation of heavy overload and severe environments. The results show that both heavy loading and falling temperatures increase the fatigue damage of SBDP considerably; therefore, SBDP should avoid heavy loading combined with winter temperatures. EA shows a fatigue life two to three times longer than that of modified matrix asphalt (SMA) or guss asphalt (GA). For the same thickness, EA pavement is demonstrated to be more suitable for an anti-fatigue design of large-span SBDP under high traffic flows and low temperatures.

This study aimed to determine the incidence of post-chikungunya chronic rheumatism (pCHIK-CR) its impact on quality of life (QoL) and chronic fatigue in adult seven years after the 2014-2015 CHIKV outbreak in Piedecuesta, Colombia. We evaluated 78 adults (median age: 30 years, IQR: 21.0; women 60.3%) with confirmed CHIKV infection. In 2022, participants underwent a GALS examination and completed surveys on disability, stiffness, health status, and fatigue. A rheumatologist evaluated patients who reported arthralgia, morning stiffness, and abnormal GALS examination. Chronic fatigue was defined as fatigue persisting for over six months. Seven years after infection, 14.1% of participants were classified as pCHIK-CR cases, 41.0% as having non-inflammatory pain likely degenerative (NIP-LD), and 44.9% without rheumatic disease (Wo-RM). Patients with pCHIK-CR and NIP-LD exhibited significantly worse QoL compared to Wo-RM cases. Chronic fatigue prevalence increased from 8.6% in Wo-RM patients to 25.0% in NIP-LD and 54.6% in pCHIK-CR cases. This study implemented a comprehensive clinical as-sessment to objectively estimate and characterize the incidence of chronic rheumatological disease attributed to CHIKV infection. One in seven cases with CHIKV infection develops pCHIK-CR, which impacts both QoL and chronic fatigue. This study contributes to understanding the burden of these arboviruses in the medium term.

Objective: To develop and validate the short version of the JAEN Scale for use in women with Fibromyalgia Syndrome (FMS) to make the balance disorder measurement process more efficient. Methods: A Cross-sectional observational validation study was conducted. Fifty-six women with FMS and 44 healthy control were included. Certain items of the original tool were selected with the aim of 1) Improving internal consistency by reducing item redundancy 2) Obtaining a diagnostic capacity with an Area Under the ROC Curve (AUC) greater than 0.70 for discriminating FMS patients and fallers. The internal consistency, factorial validity, concurrent validity and diagnostic capacity of the new tool were analyzed. Results: Factorial analysis showed a two-factor structure that explained 72% of variance. Cronbach alpha coefficients of 0.904 were obtained for the total score of the JAEN-10 items. Concurrent validity analysis showed strong correlations of the JAEN-10 with other instruments that measured quality of life, postural balance or disability related to dizziness. The score of the JAEN-10 items showed an AUC of 0.858 with a sensitivity of 64.29 and a specificity of 95.45 for discriminating between FMS and healthy controls, and an AUC of 0.835 with a sensitivity of 90.48 and a specificity of 67.24 for discriminating between fallers and non-fallers.; Conclusions: The 10-item JAEN scale is a valid instrument for discriminating between subjects with or without FMS and between fallers and non-fallers. Its psychometric properties are good and similar to those of the original 20-item scale. Moreover, it is quicker to complete, which may be relevant in subjects with a tendency to experience fatigue.

External motivational stimuli have been shown to improve athletic performance. However, the neurophysiological mechanisms underlying this improvement remain poorly understood. This randomized crossover study investigated the effects of music and verbal encouragement on measures of muscle excitation and myoelectric manifestations of fatigue in the biceps brachii (BB) and brachioradialis (BR) muscles during an endurance task. Fifteen untrained (mean age 29.57 ± 2.77 years) and 13 trained individuals (mean age 32.92 ± 2.90 years) were included. The endurance task, performed to exhaustion, consisted of keeping the dominant arm flexed to 90 degrees while holding a dumbbell loaded to 80% of 1RM with a supine grip in three randomized conditions: standard, with self-selected music, and with verbal encouragement. The untrained subjects showed an increase in task duration of 15.26% (p < 0.003) with music and 15.85% (p < 0.002) with verbal encouragement compared to the condition without external stimuli. There were no significant differences in the myoelectric manifestations of fatigue between the dif-ferent conditions. Regarding the muscle excitation metrics, although the mean amplitude, peak value and area under the curve remained unchanged across conditions, a significant reduction in the trend coefficient, indicating motor unit recruitment over time, was observed with both music (BB: -10.39%, p < 0.001; BR: -9.40%, p < 0.001) and verbal encouragement (BB: -7.61%, p < 0.001; BR: -6.51%, p < 0.001) compared to the standard condition. For the trained participants, no significant differences were observed between conditions in terms of task duration and outcome measures related to muscle excitation and myoelectric manifestations of fatigue, suggesting the possible presence of a ceiling effect on motivation. These results highlight the significant role of external motivational stimuli, such as music and verbal encouragement, in improving task performance in untrained subjects, probably through more ef-fective and efficient recruitment of motor units.

For successful reuse of old asphalt as reclaimed asphalt pavement (RAP) added to new bituminous mixtures it is necessary to improve some of its properties. This can be attained, for example, by adding an appropriate rejuvenating agent. The aim of this study was to evaluate the properties of a lab aged 35/50 pen grade bitumen, rejuvenated by addition of two varieties of rapeseed imidazo-line. Both short-term and long-term ageing were simulated using the Rolling Thin Film Oven Test (RTFOT) and Pressure Ageing Vessel (PAV), i.e. standard lab ageing methods. The first step in-cluded determination of the basic properties of the analysed pen grade bitumen. Fatigue cracking resistance of the bitumen was checked as the next step. The dynamic shear rheometer (DSR) test was carried out for this purpose, at the intermediate operating temperature of road pavements. The obtained data were then used to calculate the fatigue cracking critical temperature (FCCT). A ductility test was also carried out in a ductilometer, in which the applied tensile force was meas-ured. The obtained results demonstrated a beneficial effect of rapeseed imidazoline on the prop-erties of the tested pen grade bitumen after ageing, when added at a rate of 6% and more.

The plate heat exchanger (PHE) is a component that provides heat to be transferred from hot water to domestic cold water without mixing them with high efficiency. Over the lifetime of the PHE, cyclic pressures act on the brazing points and the plates, and this may lead to fatigue failure. The fatigue behaviour of the PHE, designed by using copper-brazed 316L stainless steel, was investigated in this study. First, the fatigue tests under the load ratio R = 0.1 were performed on the Vibrophore 100 testing machine to obtain the S-N curve of the analysed brazed joint. Based on the obtained experimental results, an appropriate material model of the analysed brazed joint has been created, which was validated with numerical calculation in the framework of a program code Ansys. A validated material model was then used for the subsequent numerical analysis of PHE. In order to carry out a numerical calculation using the finite element method (FEM), a 3D model of the heat exchanger was created based on the previous scanning of PHE-geometry. Thereafter, the geometry was parameterised, which allowed us to perform parametric simulations (monitoring different responses depending on the input geometry). Numerical simulations were carried out in the framework of the Ansys software, whereby the obtained results were analysed, and the responses were appropriately characterised according to previously determined load cases.

In colorectal cancer (CRC) patients, apart from fatigue, psychological and physical symptoms often converge, affecting their quality of life and ability to work. Our objective was to ascertain symptom clusters within a year following CRC treatment and their longitudinal association with persistent fatigue and reduced work ability at the 3-month follow-up. We used data from MIRANDA, a multicenter cohort study enrolling adult CRC patients who are starting a 3-week in-patient rehabilitation within a year post-curative CRC treatment. Participants completed questionnaires evaluating symptoms at the start of rehabilitation (baseline) and after three months. We performed an exploratory factor analysis to analyze the clustering of symptoms at baseline. Longitudinal analysis was performed using a multivariable linear regression model with dichotomized symptoms at baseline as independent variables, and the change of fatigue and ability to work from baseline to 3-month-follow-up as separate outcomes, adjusted for covariates. We identified six symptom clusters: fatigue, gastrointestinal symptoms, pain, psychosocial symptoms, urinary symptoms, and chemotherapy side effects. At least one symptom from each factor was associated with higher fatigue or reduced ability to work at the 3-month follow-up. This study highlights the interplay of multiple symptoms in influencing fatigue and work ability among CRC patients post rehabilitation.

Although the Orthotropic steel decks (OSDs) have been widely used in the construction of long-span bridges, there are frequently reported fatigue cracks after years of operation, and the bridge deck overlay also presents severe damage due to OSD crack-induced stiffness reduction. The ultra-high performance concrete (UHPC), recognized as the most innovative cementitious composites and the next generation of high-performance materials, shows high strength, ductility, toughness and well performance on durability. After its first application to the OSD bridge in early 2000s, the orthotropic Steel-UHPC composite deck has been comprehensively studied worldwide. This review will summarize some important studies and findings on behavior and fatigue performance of orthotropic steel-UHPC composite deck. The existing studies and engineering application indicate that such deck system presents good bending behavior and high fatigue performance. The failure mode of shear studs in UHPC layer is dominated by shear fractures. The cracking of UHPC layer shall consider the superposition effect of stress from both the whole bridge structure and local decks. While some reasonable structural details in the traditional OSD may not work for the orthotropic steel-UHPC composite deck. It is recommended to evaluate the stress behavior and structural parameters, as well as fatigue life by conducting the field test under in-service traffic conditions.

This paper reports the effect of as-deposited surface condition on the fatigue strength in an additive manufactured titanium alloy Ti-6Al-4V (WAAM Ti64). First, local stress concentration caused by the surface waviness was quantified by a metrology technique followed by numerical modelling. Fatigue tests were conducted under bending load with the as-deposited surface being under tensile cyclic stress. The applicability of two predictive methods was studied and compared with the fatigue test results. The traditional notch stress method overestimated the fatigue strength by a factor of 1.5 at a given life; the poor agreement with the test is attributed to the crack propagation from the waviness being dominant in the bending test, i.e., the crack initiation stage was short, hence the local stress method is unsuitable. The fracture mechanics approach has delivered good predictions at every applied stress levels. The method treats a waviness trough as an initial crack. This approach is suitable for predicting the fatigue life in materials built by wire based directed energy deposition processes.

There is evidence that Additive Manufacturing plays a crucial role in the fourth industrial revolution. The design freedom provided by this technology is disrupting limits and rules from the past enabling engineers to have new products otherwise unfeasible. Recent developments in the field of SLM have led to a renewed interest in lattice structures that can be produced non-stochastically in previously unfeasible dimensional scales. One of the primary applications is aerospace engineering where the need of lightweight and performance is urgent to reduce the carbon footprint of civil transport around the globe. Of particular concern is fatigue strength. Being able to predict fatigue life in both LCF (Low Cycle Fatigue) and HCF (High Cycle Fatigue) is crucial for a safe and reliable design in aerospace systems and structures. In the present work, an experimental evaluation of compressive-compressive fatigue behavior has been performed to evaluate the fatigue curves of different cells, varying sizes and relative density. A Design of Experiment approach has been adopted in order to maximize the information extractable in a reliable form.

Carbon fiber insole (CFI), which is lightweight and stiff to reduce energy loss and help wearers perform better in sports, has recently been introduced. However, there are scarce reports on the effects of CFI on sports performance, muscle fatigue and wearing comfort. This study investigat-ed the short-term effects of CFI on sports performance, lower extremity muscle activity, and sub-jective comfort. Thirty young healthy males performed various sports tasks and treadmill runs with wearable sensors under two experimental insole conditions (benchmark insole as a baseline, CFI). The results showed that compared to the benchmark insole, CFI significantly improved sports performance in terms of power generation and agility. However, it activated more of the Tibialis Anterior and Gastrocnemius Medialis muscles and was perceived stiffer, and less com-fortable. These findings suggested that CFI can improve sports performance, but it could cause more lower extremity muscle fatigue and subjective discomfort.

Primary Sjögren's syndrome (pSS) is a chronic, systemic autoimmune disease defined as exocrine gland hypofunction resulting in dry eyes and dry mouth. Recent interest in biological therapies for pSS has been garnered, however achieving FDA-approval has been challenging due to the numerous complications in the trials. Current literature lacks insight and a molecular target-based approach to the development of biological therapies. This review focuses on novel research in newly defined drug targets and latest clinical trials for pSS treatment. A literature search was conducted on ClinicalTrials.gov using the search term “Primary Sjögren's syndrome”. Articles published between 2000 and 2021 in English language were included. Our findings revealed the potential targets for pSS treatment in clinical trials and the most recent advances in understand-ing of molecular mechanisms underlying the pathogenesis of pSS. A prominent gap in current trials is overlooking the treatment of extraglandular symptoms such as fatigue, depression and anxiety which pervade most patients with pSS. Based on dryness and these symptom-directed therapies, emerging biological agents targeting inflammatory cytokines, signal pathways and immune reaction have been studied and proved the efficacy and safety. Novel therapies may complement existing non-pharmacological methods of alleviating symptoms of pSS. Better grad-ing systems adding extraglandular symptoms to gauge disease activity and severity should be created. The future of pSS therapies may lie in gene therapy, stem cell and tissue engineering ther-apy.

Manual material handling tasks in industry cause work-related musculoskeletal disorders. Exoskeletons are being introduced to reduce the risk of musculoskeletal injuries. This study investigated the effect of using a passive lumbar exoskeleton in terms of moderate ergonomic risk. Eight participants were monitored by electromyogram (EMG) and motion capture (MoCap) while performing tasks with and without the lumbar exoskeleton. The results showed a significant reduction in the root mean square (VRMS) for all muscles tracked: erector spinae (8%), semitendinosus (14%), gluteus (5%), and quadriceps (10.2%). The classic fatigue parameters showed a significant reduction in the case of the semitendinosus: 1.7% zero-crossing rate, 0.9% mean frequency, and 1.12% median frequency. In addition, the logarithm of the normalized Dimitrov’s index showed reductions of 11.5, 8, and 14% in erector spinae, semitendinosus, and gluteus, respectively. The calculation of range of motion in the relevant joints demonstrated significant differences, but in almost all cases, the differences were smaller than 10. The findings of the study indicate that the passive exoskeleton reduces muscle activity and introduces a minor change of strategies for motion. Thus, EMG and MoCap appear to be appropriate measurements for designing an exoskeleton assessment procedure.

The aim was to evaluate levels of compassion fatigue in nursing professionals working in complex care units of a Brazilian university hospital. A cross-sectional, descriptive, and correlational study was carried out with nursing workers from complex care units of a University Hospital. Data were collected in the second half of 2019, in the pre-pandemic period of COVID-19, using the Brazilian version of the Professional Quality of Life Scale (ProQoL-BR). A total of 146 individuals partici-pated, including 41 (28.1%) nurses, 92 (63.0%) nursing technicians and 13 (8.9%) nursing assis-tants. It was observed that 26.1% presented high level of compassion satisfaction. For 17.5% there was level of burnout and 49.7%, medium level of burnout; and 22.0% with high and 46.1% with medium level of secondary traumatic stress. Twenty-eight (19.2%) professionals had compassion fatigue, of which 16 (57.1%) were nursing technicians. There is a high percentage of professionals with medium and high rates of burnout and secondary traumatic stress, a fact that is reinforced by the presence of compassion fatigue in almost one fifth of the studied individuals. These results highlights how much the health of these workers can be affected by living with traumatic patient experiences.

The publication presents the assessment of the influence of surface treatment such as shot-peening on the fatigue life of a compressor blade exposed to resonant vibrations. As part of the work, a geometric model of the blade was developed and a numerical modal and fatigue analysis were performed. The fatigue analysis was based on the Manson-Coffin-Basquin and Ramberg-Osgood models. As part of the work, the influence of different values of residual stresses on the results of fatigue life was determined. Additionally, the location of the highest equivalent stresses was established. The obtained results of the numerical analyzes were compared with the results presented in the scientific literature. An additional aim of the study was to determine the size of the grains at various points of the blade as well as the thickness of the layer plasticized as a result of peening. The obtained results are presented in the form of tables and charts. The relationship between the location of the highest values of equivalent stresses and the thickness of the plasticized layer was determined. The explanation of the effect of shot peening on the increase in fatigue life of the blade was proposed.

The effects of build orientation and heat treatment on the crack growth behavior of 316L stainless steel (SS) fabricated via a selective laser melting (SLM) additive manufacturing process were investigated. Significant growth of available research results of additively manufactured metallic parts still needs to be improved. The most important issue connected with properties after additive manufacturing is properties high anisotropy, especially from the fatigue point of view. The research included crack growth behavior of additively manufactured 316L in comparison to conventionally made reference material. Both groups of samples were obtained using precipitation heat treatment. Different build orientation in additively manufactured samples and rolling direction in reference samples were taken into account as well. Precipitation heat treatment of additively manufactured parts allowed to reach similar microstructure and tensile properties to elements conventionally made. The heat treatment positively affected fatigue properties. Additionally, precipitation heat treatment of additively manufactured elements significantly affected the reduction of fatigue cracking velocity and changed the fatigue cracking mechanism.

Background: Physiosomatic symptoms are an important part of schizophrenia phenomenology. The aim of this study is to examine the biomarker, neurocognitive and symptomatic correlates of physiosomatic symptoms in schizophrenia. Methods: We recruited 115 schizophrenia patients and 43 healthy controls and measured the Fibromyalgia and Chronic Fatigue Syndrome Rating (FF) scale, schizophrenia symptom dimensions, and the Brief Assessment of Cognition in Schizophrenia. We measured neuro-immune markers including plasma CCL11 (eotaxin), interleukin-(IL)-6, IL-10, Dickkopf protein 1 (DKK1), high mobility group box 1 protein (HMGB1) and endogenous opioid system (EOS) markers including κ-opioid receptor (KOR), µ-opioid receptor (MOR), endomorphin-2 (EM2) and β-endorphin. Results: Patients with an increased FF score display increased ratings of psychosis, hostility, excitement, formal though disorders, psychomotor retardation and negative symptoms as compared with patients with lower FF scores. A large part of the variance in the FF score (55.1%) is explained by the regression on digit sequencing task, token motor task, list learning, IL-10, age (all inversely) and IL-6 (positively). Neural network analysis shows that the top-6 predictors of the FF score are (in descending order): IL-6, HMGB1, education, MOR, KOR and IL-10. We found that 45.1% of the variance in a latent vector extracted from cognitive test scores, schizophrenia symptoms and the FF score was explained by HMGB-1, MOR, EM2, DKK1, and CCL11. Conclusions: FF symptoms are an integral part of the phenome of schizophrenia. Neurotoxic immune and neurodegenerative pathways and to a lesser extent the EOS appear to drive FF symptoms in schizophrenia.

We propose a framework for the understanding of the pathophysiology and management of Myalgic Encephalomyelitis / Chronic Fatigue Syndrome (ME/CFS) that considers wider determinants of health and long-term temporal variation in pathophysiological features and disease phenotype throughout the natural history of the disease. As in other chronic diseases, ME/CFS evolves through different stages, from asymptomatic predisposition, progressing to a prodromal stage, and then to symptomatic disease. Disease incidence depends on genetic makeup and environment factors, the exposure to an insult, or repeated insults, and the nature of the host response. In people who develop ME/CFS, normal homeostatic processes in response to adverse insults may be replaced by aberrant responses leading to dysfunctional states. Thus, the predominantly neuro-immune and autonomic manifestations, underlined by a hyper-metabolic state, that characterise early disease, may be followed by various processes leading to multi-systemic related symptoms. This abnormal metabolic state and the effects of a range of mediators such as products of oxidative and nitrosamine stress, may lead to progressive cell and metabolic dysfunction culminating in a hypometabolic state with low energy production. These processes do not seem to happen uniformly; although a spiralling of progressive inter-related and self-sustaining abnormalities may ensue, reversion to states of milder abnormalities is possible if the host is able to restate responses to improve homeostatic equilibrium. Disease management and research efforts should seek to identify and apply strategies targeted at the different pathophysiological dysfunctions that characterise different disease stages. As disease presentation varies over time, no single case description, set of diagnostic criteria, or molecular feature is currently diagnostic for all patients at all times. While acknowledging its limitations due to the incomplete research evidence, we suggest the proposed framework may improve research design and health care interventions for people with ME/CFS.

To gain insight into riser motions and associated fatigue damage due to vortex-induced vibration (VIV), data loggers such as strain sensors and/or accelerometers are sometimes deployed on risers to monitor their motion in different current velocity conditions. Accurate reconstruction of the riser response and empirical estimation of fatigue damage rates over the entire riser length using measurements from a limited number of sensors can help in efficient utilization of the costly measurements recorded. Several different empirical procedures are described here for analysis of the VIV response of a long flexible cylinder subjected to uniform and sheared current profiles. The methods include weighted waveform analysis (WWA), proper orthogonal decomposition (POD), modal phase reconstruction (MPR), a modified WWA procedure, and a hybrid method which combines MPR and the modified WWA method. Fatigue damage rates estimated using these different empirical methods are compared and cross-validated against measurements. Detailed formulations for each method are presented and discussed with examples. Results suggest that all the empirical methods, despite different underlying assumptions in each of them, can be employed to estimate fatigue damage rates quite well from limited strain measurements.

Plasma treatment of soft polymers is the promising technique to improve biomedical properties. The response to the deformation of such materials is not yet clear. Soft elastic polyurethane treated with plasma immersion ion implantation is subjected to fatigue uniaxial loading (50000 cycles, frequency – 1 Hz, strain amplitude – 10, 20, 40%). The influence of the strain amplitude and the plasma treatment regime on damage character is discussed. Surface defects are studied in unloaded and stretched states of the material. As a result of fatigue loading, transverse cracks (with closed overlapping edges as well as with open edges deeply propagating into the polymer) and longitudinal folds which are break and bend inward, appear on the surface. Hard edges of cracks cut the soft polymer which is squeezed from the bulk to the surface.

This paper seeks to model the crack propagation in of AAs (aluminum-alloys) 2524-T3 and 7050-T7452 subjected to fatigue loading at low temperature. Fatigue crack growth tests were performed on AAs 2524-T3 and 7050-T7452 subjected to constant-amplitude and actual random-spectra loading histories at room temperature of about 25 °C and at cryogenic temperature of -70 °C, respectively, to determine their crack growth properties and residual lives. The interaction mechanisms between cryogenic temperature and the fatigue load were deduced on the basis of the results of fractographic analysis. Temperature-dependent residual lives under actual random-spectrum load history were modeled based on a modified accumulation damage rule by accounting for the load interaction. Good correlation was achieved between the predictions and actual experiments, demonstrating the practical and effective use of the proposed method.

The aim of this study was to analyze the effects of the playing position (backs vs. pivots vs. wings) and the player role (starter vs. non-starter) on internal match-load and well-being status of female handball players after official matches. Fourteen female handball players from the Spanish 2^nd Division were monitored during a half-season (13 matches, n = 102 individual observations) using rate of perceived exertion (match-RPE) and the Hooper questionnaire in MD+1 and MD+2. Differences between playing positions and player role were determined by Kruskal-Wallis and Mann-Whitney U test, respectively. Furthermore, epsilon-squared (ε²) and Cohen's d (ES) were calculated and interpreted using Hopkins' categorization criteria. The results reveal that backs registered moderately more match-RPE compared to pivots (p < 0.05, ES = 0.84). In contrast, wings experienced the highest values of fatigue and muscle soreness in MD+1 and MD+2 compared to all other playing positions (p < 0.05, ES = 0.66-0.93). Also, wings reported moderately more Hooper index in MD+1 and MD+2 than backs (p < 0.01, ES = 0.73-0.77). Furthermore, starters reported higher absolute values of match-RPE, fatigue, muscle soreness and Hooper index in MD+1 compared to non-starters (p < 0.05, ES = 0.25-0.29). However, no differences were found in MD+2. Therefore, handball coaches and practitioners should consider the internal match-load and the well-being status of the players to implement different training stimulus (e.g., recovery or compensatory strategies) in MD+1 according to playing positions and player role to equalize the total weekly load of the players.

Myalgic Encephalomyelitis (ME), sometimes called Chronic Fatigue Syndrome (CFS), is a complex, debilitating condition characterised by symptoms such as profound fatigue, autonomic dysfunction, gastrointestinal problems, unrefreshing sleep, cognitive problems, exercise intolerance and post-exertional malaise (PEM) (a worsening of symptoms after mild physical or mental effort). The pathophysiology of ME remains poorly understood. This paper proposes a novel hypothesis centred on norepinephrine dysregulation and insulin signaling as the underlying mechanisms contributing to distinct subtypes of ME. I hypothesise that ME can be categorised into three subtypes based on variations in norepinephrine transport and insulin signaling: ME1, ME2, and ME3. In ME1, a higher than normal rate of insulin secretion during the first phase insulin response and/or hypersensitive insulin receptors leads to reduced neuronal norepinephrine reuptake, resulting in elevated extracellular norepinephrine and subsequent down-regulation of beta-2 adrenergic receptors. ME2 is characterised by prolonged insulin release and insulin resistance, which may contribute to the development of postural orthostatic tachycardia syndrome (POTS) and microclot formation. ME3 is marked by reduced norepinephrine synthesis and a resultant deficiency of norepinephrine within neurons. All three subtypes involve a deficiency of norepinephrine inside the noradrenergic neuron which is worsened by physical and mental exertion. There are many similarities between ME and Long COVID. Both have their onset after a virus and have a similar symptom profile, as well as having the same co-occurring conditions such as mast cell activation and POTS. It is quite possible that a subset of Long COVID patients have ME, and so I will be referring to both ME and Long COVID research papers throughout this hypothesis paper. This hypothesis integrates genetic, metabolic, and neuroendocrine data to delineate these subtypes and suggests tailored diagnostic and therapeutic approaches for each. This hypothesis aims to guide future research into the distinct pathophysiological mechanisms of ME and enhance understanding and management of this debilitating condition.

Circadian rhythm (CR) influences various physiological functions, including physical and cognitive performance, which fluctuate throughout the day. The present study aimed to investigate the combined and separate effects of CR and physical fatigue on cognitive and physical performance. A sample of 18 amateur athletes was subjected to a series of tests at three different times of the day: morning, afternoon, and evening. Fatigue was induced following isokinetic concentric exercise combined with a 20-minute treadmill run, followed by assessments of selected physical and cognitive tasks. Repeated measures ANOVA did not reveal an interaction between CR and fatigue in cognitive performance (p &gt; 0.05). However, a significant main effect of fatigue was observed in visual reaction time (VisRT) across all three time points. Moreover, peak torque (PT) and peak torque fatigue index (PTFI) showed significant differences between the three times of the day, peaking in the evening. Although we found no interaction between CR and physical fatigue state on selected cognitive parameters at the three times of day, a separate effect of fatigue on cognitive performance was identified. Additionally, physical parameters exhibited peak values occurring in the evening hours. Future research should further explore underlying mechanisms that potentially influence cognitive performance at different times of the day.

This study investigates the effects of home-based Kakao health care breathing exercises and stretching on respiratory function and fatigue in COVID-19 cured patients. A total of 35 participants performed four movements of home-based breathing exercise and five respiratory muscle stretching exercises four times a week for four weeks. Respiratory function was measured using FVC, FEV1, FEV1/FVC, and PEF. Fatigue was assessed using the Fatigue Severity Scale (FSS). Data analysis was performed using Independent Samples and Paired Samples T-tests in SPSS 24, with a significance level set at p &lt; 0.05. After four weeks of Home based Kakao health care Breathing Exercise, there were significant increases in respiratory FVC, FEV1, FEV1/FVC, and PEF function values observed in the training group (T.G.) after the exercise intervention (p &lt; 0.05). Such an increase was observed when comparing these values with the pre-exercise measurements. In contrast, there was no statistically significant difference in respiratory function outcomes before and after exercise in the control group (C.G.) (p &gt; 0.05). The FSS scores were statistically significant within the training group (T.G.). (p &gt;0.05). The 4-week Kakao health care Breathing Exercise was found to be capable of improving some respiratory functions in COVID-19-recovered patients, but it showed no significant improvement in fatigue levels.

Objective: The study aimed to evaluate the effects of monoclonal antibodies (mAbs) acting on the calcitonin gene-related peptide (CGRP) or its receptor (anti-CGRP/R mAbs) on comorbid symptoms of depression, anxiety, and fatigue in migraine patients resistant to traditional prophylaxis. Methods: The study was an open-label prospective study assessing comorbidities in patients with high frequency (HFEM) and chronic migraine (CM), medication overuse headache (MOH), and resistance to traditional prophylaxis treated with anti-CGRP/R mAbs for 3 months. Results: 77 patients were enrolled with either HFEM (21%) or CM (79%) with or without MOH (56% and 44% respectively). We identified 21 non-responders (27%) and 56 responders (73%), defined on the reduction ≥ 50% of headache frequency. The two groups were highly homogeneous for investigated comorbidities. Disease severity in terms of headache frequency, migraine-related disability, and affective comorbid symptoms were reduced in both groups with different thresholds; allodynia and fatigue were ameliorated only in responders. Conclusion: anti-CGRP/R antibodies improve pain together with affection, fatigue, and sensory sensitization in migraine patients.

Understanding the pathophysiology of Myalgic Encephalomyelitis/Chronic Fatigue Syndrome (ME/CFS) is critical for advancing treatment options. This review explores the novel hypothesis that herpesviruses' infection of endothelial cells (ECs) may underlie ME/CFS symptomatology. We review evidence linking herpesviruses to persistent EC infection and the implications for endothelial dysfunction, encompassing blood flow regulation, coagulation, and cognitive impairment – symptoms consistent with ME/CFS and Long COVID. The paper provides a synthesis of current research on herpesvirus latency and reactivation, detailing the impact on ECs and subsequent systemic complications, including latent modulation and long-term maladaptation. We suggest that the chronicity of ME/CFS symptoms and the multisystemic nature of the disease may be partly attributable to herpesvirus-induced endothelial maladaptation. Our conclusions underscore the necessity for further investigation into the prevalence and load of herpesvirus infection within ECs of ME/CFS patients. This review offers a conceptual advance by proposing an endothelial infection model as a systemic mechanism contributing to ME/CFS, steering future research towards potentially unexplored avenues in understanding and treating this complex syndrome.

Muscle fatigue caused by using staplers affects the surgical procedures of surgeons. Compared to manual staplers, electric staplers decrease the muscle fatigue by replacing repeated gripping and releasing with automatic model. Still powered by the battery, the electric staplers are confronted with new operation fatigue due to the extra weight of the battery. The weight and manual operation of the electric stapler can cause user's muscle fatigue. To tackle the unsettled fatigue issue, the study is to propose a new design method to offset the influence of extra weight of the battery attached to the electrical stapler by changing the opening and closing of the stapler end clamp to electric control. The purpose of this study is to verify whether the design of this electric stapler can offset the impact of weight. Experiments are set up to test the feasibility of the design on 12 male Chinese surgeons. The muscle fatigue is indicated by measuring the EMG (electromyography) signal, and the stapler's working effect is indicated by measuring the end movement of the stapler. The result shows the new-designed stapler reduce the operation fatigue, counteracting the impact of the battery weight.

An algorithm is proposed for discriminating the fatigue state of air traffic controllers based on ap-plying multispeech feature fusion using an FSVM to voice data, and for extracting eye-fatigue-state discrimination features based on PERCLOS eye data. For the speech algorithm and an eye-fatigue index, a new controller fatigue-state evaluation index based on the entropy weight method is proposed based on decision-level fusion of fatigue discrimination results for speech and the eyes. Experimental results show that the fatigue-state recognition accuracy rate was 84.81% for the fatigue state evaluation index, which was 3.36% and 1.86% higher than those for speech and eye assessments, respectively. The comprehensive fatigue evaluation index provides important reference values for controller scheduling and mental-state evaluations.

Body weight support (BWS) and incline running (IR) are commonly used either during rehabilitation or during training separately, with many positive effects on athletes’ performance and rehabilitation. The aim of this study is to investigate the effect of BWS and IR. In eighteen healthy men (age: 20.3 ± 1.2 yr, body weight: 70.2 ± 4.8 kg, body height: 179.6 ± 5.4 cm), the changes in electromyographic activity (EMGA) during a 10-min run with BWS (15% or 30% of body weight; in different occasions) and IR at 7%, as well as jumping performance and gait spatiotemporal parameters were evaluated. Lower Rating of Perceived Exertion and a significant decrease in VL (33,4%), SOL (17%), and GL EMGA (28.5%, p &lt; 0.05) but not in GM (10.5%, p &gt; 0.05), were observed during BWS30% at 7% slope compared to flat running. Also, low-frequency fatigue of the quadriceps was induced only after running without BWS at 7% slope (P = 0.011). No changes were found in jumping performance (p = 0.246) and gait spatiotemporal parameters (p &gt; 0.05) except for flight time (p &lt; 0.006). In conclusion, compared to normal flat running, BWS reduces electromyographic activity and fatigue during slope running.

In this paper, we present a new stress calculation method for flexible structures, particularly, the tensile armors, and apply it to flexible riser fatigue analysis. The method is based on a 3-dimensional curved bar theory. First, the tensile armor center line was described as a cylindrical helix curve, its bended curve length and bending migration length were derived and studied under different friction scenarios. Second, the tensile and bending stiffness was given with consideration of frictional hysteretic effect, and verified through FEA analysis results. Third, we presented the stress calculation formula for tensile armor under tension and bending load. All stress components are considered, including tensile, bending and shear stresses. Fourth, the method was benchmarked with published experimental results on a flexible prototype tension and bending tests, and comparisons showed general agreements. Fifth, the method is further applied to a 8” flexible riser for fatigue assessment and lifetime extension evaluation, and showed the flexible riser has sufficient remaining fatigue life, and is suitable to continue its service under the current operating conditions. Last, conclusions are drawn. It concluded that the presented tensile armor stress calculation method and modelling techniques are valid for flexible riser fatigue analysis. This method is time efficient, and can be implemented into other multi-scale models for riser dynamic analysis. It is also applicable to other similar helix structure stress analysis, such as wire ropes, submarine hoses, and subsea umbilicals.

This study investigated the mechanical properties and fatigue behavior of FH36 steel plate rolled in different directions. By adopting a sequential rolling process in the rolling direction (RD) and transverse direction (TD), the differences in properties between RD and TD were eliminated, resulting in nearly identical tensile properties. The steel plate exhibited a yield strength of approximately 420 MPa, a tensile strength of approximately 506 MPa, and an elongation of approximately 25%. Fatigue tests conducted at room temperature and -60℃ showed a fatigue limit of the maximum stress of 488 MPa at room temperature and 500 MPa at -60℃, indicating improved low-temperature fatigue performance. The fracture surfaces displayed distinct characteristics, such as oblique shearing fractures for high-cycle fatigue and cup-cone shape fractures for low-cycle fatigue. The fatigue source zone were both on the surface of the specimens. As the maximum stress increased, the area of the crack propagation zone for high-cycle fatigue decreased, while the area of the final fracture zone, the number of dimples and the proportion of the LAGBs increased.