Preprints are regularly cited in peer reviewed journal articles, books and conference paper. Are preprint citations somehow less important than citations to peer reviewed research papers? This study investigates citation patterns between 2017 and 2020 for preprints published in three preprint servers, one specializing in biology (bioRxiv), one in chemistry (ChemRxiv), and another hosting preprints in all disciplines (Research Square). As evaluation of scholarship continues to largely rely on citation-based metrics, this analysis and its outcomes will be useful to inform new research-based education in today’s scholarly communication.

In this paper, a numerical modeling of the impact, spreading, and eventually rebound of a viscoelastic droplet is reported. The numerical model is based on the volume of fluid (VOF) method coupled with the FENE-CR constitutive equations, and accounts for both the surface tension and the substrate wettability. The FENE-CR constitutive equations are used to model the polymer solution, while taking advantage of its rheological characterization. The comparison is performed between droplets of Newtonian solvent and a monodisperse polymer solution. The droplet impact on both hydrophilic and superhydrophobic substrate is analyzed through a detailed analysis of the spreading diameter evolution. It is found that while the droplet kinematic phase seems independent of the substrate and fluids properties, the recoiling phase is highly related to all of them. In addition, the model infers a critical polymer concentration above which the droplet rebound from a superhydrophobic substrate is suppressed. The simulation is of particular interest to ink-jet processing, and demonstrates the capability of the model to handle complex non-Newtonian droplet dynamics.

This paper presents a numerical two-scale framework for the simulation of fiber reinforced concrete under impact loading. The numerical homogenization framework considers the full balance of linear momentum at the microscale. This allows for the study of microscopic inertia effects affecting the macroscale. After describing the ideas of the dynamic framework and the material models applied at the microscale, the experimental behavior of the fiber and the fiber-matrix bond under varying loading rates are discussed. To capture the most important features, a simplified matrix cracking and a strain rate sensitive fiber pullout model are utilized at the microscale. A split Hopkinson bar tension test is used as an example to present the capabilities of the framework to analyze different sources of dynamic behavior measured at the macroscale. The induced loading wave is studied and the influence of structural inertia on the measured signals within the simulation are verified. Further parameter studies allow the analysis of the macroscopic response resulting from the rate dependent fiber pullout as well as the direct study of the microscale inertia. Even though the material models and the microscale discretization used within this study are still simplified, the value of the numerical two-scale framework to study material behavior under impact loading is shown.

The welding performance of shipbuilding steel under large heat input could be improved greatly by the Mg addition to the steel, but the impact toughness of the HAZ is not stable. According to the three different thickness steel plates obtained in the industrial experiment, the large heat input welding was carried out by different heat input, and the impact toughness analysis, impact fracture analysis, metallographic microstructure analysis and inclusions analysis were carried out. The results showed that, the HAZ of three kinds of thickness plates induced a lot of IAF, with Mg addition, the inclusion dimension had been reduced effectively, and the IAF induced ability of the inclusions had also been improved. The difference of HAZ impact toughness with different welding heat input and different impact temperature is significant, in consideration of the influence of welding heat input and metallographic microstructure on impact toughness of HAZ, the welding heat load had far greater effect than metallographic microstructure on ductile-brittle transition temperature. At the same time, if the original metallographic microstructure of steel was coarse, the pinning effect of the inclusions would be reduced significantly, and the microstructure of HAZ would be coarsened and the impact toughness of HAZ would be decreased, so there is a certain matching relationship between the metallographic microstructure and the inclusion dimension.

This review article is focused on the analysis of the state of the art of sensors for guided 9 ultrasonic waves for the detection and localization of impacts, therefore of interest for the structural 10 health monitoring (SHM). The recent developments in sensor technologies are then reported and 11 discussed through the many references in recent scientific literature. The physical phenomena re-12 lated to impact event and the main physical quantities are then introduced to discuss their im-13 portance in the development of the hardware and software components for SHM systems. An im-14 portant aspect of the article is the description of the different ultrasonic sensor technologies cur-15 rently present in the literature and what advantages and disadvantages they could bring, in relation 16 to the various phenomena investigated. In this context, the analysis of the front-end electronics is 17 deepened, the type of data transmission both in terms of wired and wireless technology and in terms 18 of online and offline signal processing. The integration aspects of sensors for the creation of net-19 works with autonomous nodes with the possibility of powering through energy harvesting devices 20 and the embedded processing capacity is also studied. Finally, the emerging sector of processing 21 techniques using deep learning and artificial intelligence concludes the review by indicating the 22 potential for the detection and autonomous characterization of the impacts.

This article investigates if public investments in rural basic infrastructure represent the best strategy for boosting the local economy of rural communities from Romania. The article focuses on one specific program implemented under the Cohesion policy in the framework of the National Plan for Rural Development called Measure 322. Geographically, the research included a sample of rural communes from the North-Western Region of Romania. Moreover, the study also looks at other determinants of local economic development (LED) than infrastructure investments, with a focus on certain feature characterizing Romanian rural communities such as population size, isolation from urban centers, connection with European and national roads networks, educational stock, etc. The research included three steps, namely the construction of the LED Index, a cvasi-experimental research, and a regression model. Our main findings seem to suggest that while investments in infrastructure help the development gap between beneficiaries and non-beneficiaries remains relatively the same. In terms of determinants of LED, percentage of population with a university degree and connection to a European road are the most significant in the Romanian rural context.

This article conceptualises the link between firms’ value chains and distribution networks and the requirements for double materiality assessments in contemporary reporting regulations worldwide. The new European Sustainability Reporting Standards (ESRS) and the standards for sustainability reporting issued by the International Sustainability Standards Board (ISSB), called IFRS S1 and IFRS S2, require companies to report their own direct (scope 1) and indirect (scope 2) greenhouse gas (GHG) emissions as well as GHG emissions in their value chains and distribution networks (both scope 3). However, GHG emissions comprise just one dimension of information that is relevant to understand when assessing, managing and reporting the footprints and impacts of a firm and are, therefore, only a fraction of the key performance indicators (KPIs) related to ESG that should be disclosed. Through a case study, this article demonstrates the connection between the due diligence analysis of firms’ value chains and distribution networks, the analysis of the competitive parameters of the business model, the identified impacts, risks and opportunities, and the double materiality perspective. The double materiality perspective prioritises actions based on probability and significance, creating a natural space to identify KPIs. The article concludes by applying the REGS model and illustrating how it can assist firms in identifying relevant KPIs based on double-materiality assessments.

Impact load was applied to hardened cement paste (HCP) specimens using a gas gun to investigate microscopic changes in the specimens and develop a better response model of concrete subjected to impact load. Plasma emission was observed at the moment of impact at 420 m/s and the colour of the portion near the impact point turned brighter. This brighter portion was analysed, and it was observed that the pore structure was coarser compared to the other portion; however, the results of thermogravimetry and X-ray diffraction analysis were similar. A possible reason is that the generated heat was instantaneous and the rate of the temperature increase in the HCP decreased due to evaporation of water in the HCP. These results indicate that during impact at a few hundred m/s, porosity increase due to heat effect is more dominant than porosity decrease due to mechanical compaction.

This study addresses the causal links between external factors and the main hydro-climatic variables. There is a gap in the literature on the description of a complete chain in addressing the structures of direct causal links of solar activity on the terrestrial variables. This is why, the present study uses the extensive facilities of the application of information theory in view of recent advances in different fields. Also, by other methods (e.g. neural networks) first are tested the existence non-linear links of solar-terrestrial influences on hydro-climate system. The results are promising related to the solar impact on terrestrial phenomena which is discriminant in space-time domain. The implications prove robust for determining the causal measure of climate variables under direct solar impact which makes it easier to consider solar activity in climate models, by appropriate parametrizations. This study found that hydro-climatic variables are sensitive to solar impact only for certain frequencies (periods) and these have a coherence with the Solar-Flux only for some lags of the Solar-Flux (in advance).

The aim of this study was to examine the post-injury psychological impact looking for to avoid sources of health issues. We have analyzed differences in the stress, anxiety and depression levels between male and female football players who have suffered at least one injury during the last season played respect to similar players who have not been injured. A descriptive cross-sectional design was used. The participants were 187 football players and data on the player’s injuries were collected. A Self-reported Questionnaire collected number, type and severity of injuries sustained during the previous sports season (twelve months), and also the player’s current situation being injured or not injured. To evaluate the psychological variables, the DASS-21 questionnaire was used. Results indicated that the male injured players presented anxiety levels higher than those who were non-injured. When we observe the female players’ data, the stress levels of the non-injured ones are higher than those of the injured players. Regarding the non-injured athletes, results showed that the female non-injured players presented values in anxiety higher than those corresponding to the non-injured male players. Thus, sport injury affects mental health issues such as anxiety and stress, and in a different way regarding gender.

The node position information is critical in the wireless sensor network (WSN). However, the existing positioning algorithms commonly have low positioning accuracy because of noise interferences in communication. To solve this problem, this paper presents an iterative positioning model based on distance correction to improve the positioning accuracy of the target node in WSN. First, the log-distance distribution model of received signal strength indication (RSSI) ranging is built and the noise impact factor is derived based on the model. Second, the initial position coordinates of the target node are obtained based on the triangle centroid localization algorithm, thereby calculating the distance deviation coefficient under the influence of noise. Then, the ratio of the distance measured by the log-normal distribution model to the median distance deviation coefficient is taken as the new distance between the anchor node and the target node. Based on the new distance, the triangular centroid positioning algorithm is used again to calculate the target node coordinates. Finally, the iterative positioning model is constructed, and the distance deviation coefficient is updated repeatedly to update the positioning result until the set number of iterations is reached. Experiment results show that the proposed iterative positioning model can improve positioning accuracy effectively.

Climate change and net zero are expected to have a significant impact on eco-nomic activity in developing countries, and thus, on the financial cash flow of organizations. In this paper, we propose a procedure for assessing the financial impact of climate change on organizational cash flow in developing countries. Our study contributes to the research on scenario-based climate change impact analysis. The applied research design is exploratory and mainly qualitative, constructing financial impact scenarios combined with narratives to determine the impact of climate change on individual cash flow line items. The narra-tives rationalize cash flow variations and enrich the estimates by adding expert knowledge, in the form of financial micro-stories and descriptions to the pro-posed procedure. We present a hypothetical citrus farming company in a de-veloping country to demonstrate the application of the proposed measurement procedure. The results obtained suggest that (1) the procedure is practical be-cause financial cash flows are known and widely used in financial analysis and because they can be implemented in a spreadsheet; that (2) the procedure pro-vides flexibility because it can be adapted to suit the specific needs of different companies, depending on a selected climate change scenario, the company’s exposure to climate change, its resilience and vulnerability; (3) that the prac-tice of thinking in terms of financial worst-case, base-case and best-case sce-narios, which reflect different levels of uncertainty, helps to model the finan-cial impacts of climate change and provides a forward-looking perspective on how much a company’s cash flow could change.

Context: COVID-19 pandemic and the Lockdown implemented as a measure to contain the virus spread has taken a toll over the psychological well-being of the people especially the young adults, the confinement along with the environment of a highly infectious pandemic around the induvial are put under great stress.Aims: The current study aims to assess the psychological impact and perceived stress due to COVID-19 lockdown in Young Adult population of India.Settings and Design: It is a cross sectional, observational study.Methods and Material: The survey was conducted using Google forms involving snowball sampling technique which obtained 267 responses in total. (IES-R) and (PSS) scales were used for the study.Statistical analysis used: Descriptive analysis were performed on the sociodemographic parameters and the comparison of means were done by Chi-square test in SPSS Statistic 21.0 (IBM SPSS Statistics, New York, United States). Results: The mean IES-R and PSS scores obtained for the population in this study was 25.64±18.95 and 18.27±6.10 respectively. Out of the 267 respondents in total 61.4% (n=164) of them were males. Maximum of the respondents 62.54%(n=167) belonged to the age group of 18-23 with mean age being 23.14± 2.913. 92.5% of the respondents were unmarried and only 26.6% belonged to the rural part of India. Females, younger individuals were found to have higher IES-R and PSS scores. Conclusions: There is significant psychological burden and stress on the young Indian population with females and younger individuals particularly students are the most vulnerable population.

The effects of partial replacement of Si by Al on the microstructure, tensile properties, and Charpy impact toughness were investigated using 0.2%C-Si/Al-Mn-Cr-B TRIP-aided martensitic steels. The impact toughness was related to the microstructural and mechanical properties. The partial re-placement decreased the volume fraction of retained austenite and increased the mechanical stabil-ity, accompanied by softening and an increase in the volume fraction of the primary martensite. Resultantly, the partial replacement decreased strength and ductility. The impact absorbed energy (value) at 25 C was slightly increased by the partial replacement. The increased impact absorbed energy was mainly caused by high crack/void propagation energy due to the softened primary martensite and a small contribution of the stabilized retained austenite. The 50% shear fracture ductile-to-brittle transition temperature was marginally raised by the partial replacement. The raised transition temperature was mainly associated with an increase in a unit crack path of qua-si-cleavage/cleavage fracture.

Purpose To analyse diagnostic and therapeutic impact of molecular imaging TNM (miTNM) stage obtained with 18F-DCFPyL versus 18F-Fluorocholine in head to head comparison in biochemical recurrence (BCR) prostate cancer (PCa). Material and methods Patients with BCR PCa after radical treatment with previous 18F-Fluorocholine-PET/CT (negative or oligometastatic disease) were derived to 18F-DCFPyL-PET/CT. Patients were classified attending to: grade group, EAU classification, PSA, PSA doubling time (PSAdt) and PSA velocity (PSAvel). The overall detection rate (DR) and miTNM stage according to PROMISE criteria were assessed for both radiotracers and also correlation (Kappa). The influence of PSA and kinetics on both PET/CT (DR and miTNM) and predictive value of unfavourable kinetics on miTNM were determined. Cut-off PSA, PSAdt and PSAvel values able to predict PET/CT results were determined. Change in miTNM and treatment derived of 18F-DCFPyL information with respect to 18F-Fluorocholine was also evaluated. Results We studied 138 patients. 18F-DCFPyL showed a higher DR than 18F-Fluorocholine (64.5% vs 33.3%). 18F-DCFPyL and 18F-Fluorocholine detected T in 33.3% versus 19.6%, N in 27.5% versus 13.8%, M in 30.4% versus 8.7%. Both tracers DR showed significant associations with PSA and PSAvel. Significant association was only found between miTNM and PSA on 18F-Fluorocholine-PET/CT (p=0.033). For 18F-Fluorocholine and 18F-DCFPyL PET/CT a PSAdt cut-off of 4.09 and 5.59 months, respectively, were able to predict M stage. 18F-DCFPyL changed therapeutic management in 40/138 patients. Conclusion 18F-DCFPyL provides a higher DR and superior miTNM staging than 18F-Fluorocholine in restaging BCR, especially with high PSA and unfavourable PSA kinetics, showing a fair agreement to 18F-Fluorocholine.

Since the exploitation of mineral resources results in the release of radionuclides, and consuming radionuclides affects public health in the short and long term. A case study of the environmental radiation impact from coal mining and germanium processing was carried out in southwest China. The coal mines contain germanium and uranium and have been exploited for more than 40 years. The farmlands around the site of coal mining and germanium processing have been contaminated by the solid waste and mine water in some extend since then. Samples of crops have been collected from contaminated farmlands in research area. The research area covers a radius of 5 km, in which there are 2 coal mines located. 210Pb and 210Po have been analyzed as the key radionuclides during monitoring program. The average activity concentrations of 210Pb and 210Po in the crops were 1.38 and 1.32 Bq/kg in cereals, 4.07 and 2.19 Bq/kg in leafy vegetables and 1.63 and 1.32 Bq/kg in root vegetables. The annual effective doses due to the ingestion of 210Pb and 210Po in consumed crops have been estimated for adult residents living in research area. The average annual effective dose was 0.336mSv/a, while the minimum was 0.171 mSv/a and the maximum was 0.948 mSv/a. The results show that crops grown on contaminated farmland contained an enhanced level of radioactivity concentration. Ingestion doses of local residents in research area were significantly higher than the China average level of 0.112 mSv/a, and the world average level of 0.042 mSv/a through 210Pb and 210Po in crops intake respectively.

The study examines the return performance and resilience to market volatility of the recently introduced Environment, Social/Sustainable, and Governance (ESG) weight-tilted Hang Seng Index (HSIESG) compared to its parent, the Hang Seng Index (HSI). The ESG-infused index has a higher mean return and lower return volatility than the parent index, although the differences are statistically and economically insignificant, a result consistent with the high correlation between the two index returns. Most important, the ESG weighted-tilted index is more resilient to volatility spikes than the parent index and therefore has lower downside risks. The overall results show that stocks with high ESG ratings are less susceptible to trading pressures triggered by volatility-induced turnovers. The paper contributes to the literature by providing significant incremental information on the emerging market for ESG-related equity products in Hong Kong.

Polymethyl methacrylate (PMMA) polymer is widely used in various fields today. In order to thoroughly reveal the structural impact performance of PMMA materials, this paper is based on the comprehensive Johnson-Cook constitutive model and damage failure model, and accurately confirm the J-C constitutive and damage failure model parameters of PMMA through material test data, The dynamic process of steel bullet impacting PMMA plate structure is analyzed by finite element software ABAQUS. The calculation results show that the numerical simulation results in this paper are in good agreement with the experimental test data. Therefore, the feasibility and accuracy of the impact analysis of PMMA structures based on J-C constitutive and damage failure models in this paper are studied. Finally, based on the J-C constitutive model and damage failure model, the variation of the residual velocity of the bullet with the PMMA plate thickness is analyzed in depth, that is, the results show that the residual velocity of the bullet has a certain linear relationship with the plate thickness.

Recently, more and more countries are entering the global race for university competitiveness. On the one hand, global rankings are a convenient tool for quantitative analysis. On the other hand, their indicators are often difficult to quickly calculate, they often contradict each other. We thought about using widely available indicators for a quick analysis of the University's publication strategy. We opted for the normalized citation indicators available in SciVal analytical tool, i.e. Source Normalized Impact per Paper (SNIP) and Field-Weighted Citation Impact (FWCI). We have demonstrated the possibility of applying the correlation analysis to the impact indicators of a document and a journal on the sample of the social and humanitarian fields at Peoples' Friendship University of Russia. Particular attention was paid to the application of the results in practice.

Air pollution poses a significant risk to public health and ecosystems. The use of sophisticated models to simulate the transformation and dispersion of pollutants in the atmosphere is a recognized method to assess air pollution levels and its sources and inform policy decisions for effective mitigation strategies in urban and industrial environments. The reliability of models depends, in part, on the sensitivity to the variance of input parameters, which can introduce uncertainty into the model's predictions. This uncertainty is especially challenging when the input parameters exhibit inherent variability. In this study, we analyse the uncertainty of an integrated emission/dispersion model by evaluating the relationship between input parameters and model outcomes. We uncover new aspects of this relationship while clarifying some previously known dependencies. Wind speed was found to have the most significant effect on calculated concentrations, with small differences leading to substantial concentration variations. The time of day, which reflects prevailing vertical turbulence conditions, was also found to have a notable impact on concentrations, whereas ambient temperature can also significantly influence model’s results. Based on these findings, we offer specific recommendations for regulators and scientists involved in environmental impact assessment to improve the accuracy and reliability of air pollution modelling.

Objective: To analyze the clinical and economic impact of community-onset urinary tract infections (UTI) caused by extended-spectrum beta-lactamase (ESBL)-producing Klebsiella pneumoniae requiring hospitalization. Methods: A retrospective cohort study included all adults with UTI caused by K. pneumoniae admitted to a tertiary care hospital in Barcelona, Spain, between 2011 and 2015. Demographic, clinical and economic data were analyzed. Results: One hundred and seventy-three episodes of UTI caused by K. pneumoniae were studied; 112 were non-ESBL-producing and 61 ESBL-producing. Multivariate analysis identified ESBL production, acute confusional state associated with UTI, shock, and time to adequate treatment as risk factors for clinical failure during the first 7 days. Economic analysis showed differences between ESBL-producing and non-ESBL-producing K. pneumoniae for the total cost of hospitalization per episode (mean 6,718 € vs 3,688 € respectively). Multivariate analysis of the higher costs of UTI episodes found statistically significant differences for ESBL production and time to adequate treatment. Conclusion: UTI caused by ESBL-producing K. pneumoniae requiring hospitalization, and time to adequate antimicrobial therapy are associated with worse clinical and economic outcomes.

The ductile behavior of strain hardening cement-based composites (SHCC) under direct tensile load makes them promising solutions for applications where high energy dissipation is needed, such as earthquake, impact by a projectile, or blast. However, the superior tensile ductility of SHCC due to multiple cracking does not necessarily entail compressive and shear ductility. As an effort to characterize the behavior of SHCC under impact compressive and shear loading, relevant to the mentioned high-speed loading scenarios, the paper at hand studies the performance of a SHCC and its constituent cement-based matrices using the split-Hopkinson bar method. For compression experiments, cylindrical specimens with a length-to-diameter ratio (l/d) of 1.6 were used. The selected length of the sample led to similar failure modes under the quasi-static and impact loading conditions, which was necessary for a reliable comparison of the obtained compressive strengths. The impact experiments were performed in a split-Hopkinson pressure bar (SHPB) at a strain rate that reached 110 s-1 at the moment of failure. For shear experiments, a special adapter was developed for a split-Hopkinson tension bar (SHTB). The adapter enabled performing impact shear experiments on planar specimens using the tensile wave generated in the SHTB. Results showed a dynamic increase factor (DIF) of 2.3 and 2.0 for compressive and shear strength of SHCC, respectively. As compared to the non-reinforced constituent matrix, the absolute value of the compressive strength was lower for the SHCC. Contrarily, under shear loading, the SHCC yielded the higher shear strength than the non-reinforced matrix.

In many ports, the ship's speed is limited for the safety of navigation. At the same time, ship captains and port pilots choose the speed of the ship, but not higher than the permitted speed of the ship in the port, therefore the speed of the ship also depends on the experience of the ship captains and port pilots and the sailing conditions of the ship in specific conditions. Choosing the optimal speed of ships in port, including the effect of shallow depth, can reduce fuel consumption and ship emissions in ports, which is important for the development of green and sustainable ports. In all cases, shipping safety is the highest priority. The main objectives of the article are determining the optimal speed of ships in ports with low clearance, ensuring navigational safety, reducing fuel consumption and emissions, and at the same time creating a sustainable port. The article presents the methodology of optimal ship speed calculation, minimum ship controllable speed maintenance, fuel consumption and emission reduction methodology and their impact on sustainable and green maritime transport and port development. The developed methodology was tested on real ships and with the help of a calibrated simulator, sailing through harbor channels and harbor waters in low clearance conditions.

The overrun of transient power quality index caused by the large-capacity electric arc furnace (EAF) has become a prominent problem affecting the safe and stable operation of the power system. (1) In this paper, the relationship between arc furnace volt-age and current is derived based on the different stages of arc combustion, and the random variation of chaotic phenomenon of the arc voltage are simulated. Established an EAF model suitable for the study of transient power quality problems. (2) Take 50t AC EAF as an example to analyze the reactive power impact and the influence on the point of common coupling (PCC) voltage caused by the three-phase short circuit of the electrode. The results show that the experimental results are consistent with the theoretical analysis, verifying the correctness and effectiveness of the model. (3) When the three-phase short-circuit occurs, the reactive power impact is nearly 6 times that of normal operation, the short-circuit current is 2.66 times that of normal operation, and the effective value of the PCC voltage has dropped by 40.37%, which provides a theoretical basis for real-time compensation of impulsive reactive power and improvement of the transient power quality of the EAF.

This paper examines the Business Model (BM) from a socioeconomic system perspective to discern key factors, and understand its interactions resulting in the Scaling of Social Impact (SSI) in Social Entrepreneurship (SE). Previously, studies have explained the importance of BM in relation to SE. However, there is a lack of empirical studies on how BM’s transitions through participation of various actors result in SSI. This research applies qualitative analysis on a single case study of a Japanese social startup, “mymizu”, the first water refill application platform in Japan. The findings show that collaboration amongst different stakeholders on the initial phase of the BM could increase awareness of responsible consumption, convert into actual users for sustainability, and change their behavior. Secondly, members of the society could take on dual roles, both as users and collaborators in the BM, which results in an exponential scaling effect of the social impact. This paper contributes towards adding a participatory stakeholder (PS) to the ecosystem of SSI and building a “regenerative” BM that is relevant in SE towards sustainability.

Stormwater management is a key urban issue in the world, in line with the global issues of urban sprawl and climate change. It is urgent to investigate the effectiveness in managing stormwater with different strategies for maintain urban resilience. A method based on a storm water management model (SWMM) was developed for assessing the control of stormwater runoff volume and the percentage removal of suspended solids by implementing a Sponge City strategy. An interdisciplinary approach was adopted incorporating Low Impact Development (LID) with urban Green Infrastructure and Gray Infrastructure paradigms in a typical old residential community in Suzhou, China. Four types of sponge facilities for reducing stormwater runoff were bio-retention cells, permeable pavements, grassed pitches, and stormwater gardens. The simulation results indicate that the stormwater pipe system can meet the management standard for storms with a five-year recurrence interval. The volume capture ratio of annual runoff is 91% and the reduction rate of suspended solids is 56%. This study demonstrates that Sponge City strategy is an effective approach for managing stormwater, particularly in old and densely populated urban areas. Implementing spongy facilities with a LID strategy for stormwater management can significantly enhance urban water resilience and increase ecosystem services.

Silty clay modified by fly ash and crumb rubber is a kind of sustainable subgrade filler which has good anti-freeze-thaw resistance stability but wake vibration isolation performance. The objective of this study was to improve the vibration isolation of the modified soil and investigate the vibration isolation effect of the composite subgrade structure of XPS plates and the modified soil by indoor impact test. First, the vibration isolation performance of silty clay, modified soil and composite subgrade structure was respectively evaluated. Second, the effect of XPS plate’s thickness and vibration intensity on the vibration performance of the composite subgrade structure were evaluated. Third, the vibration isolation performance of the test groups under the condition of freeze-thaw cycles was assessed. The results show that the vibration isolation performance of subgrade can be effectively improved by setting XPS plates. The composite subgrade structure has certain vibration isolation effect, especially in vertical direction. Considering vibration isolation performance and costs, 5cm is the optimum XPS plates thickness. The composite subgrade structure has great vibration isolation performance under the condition of freeze-thaw cycles, so it is suitable to be applied in road subgrade in seasonal frozen regions.

Abstract Mastitis is a common disease of dairy animals. The source of mastitis infection may be regarded as contagious or environmental. A wide range of pathogens including bacteria, viruses, fungi, and the toxins of these pathogens can cause the disease. Mastitis is generally associated with poor hygienic and husbandry practices. The primary reservoir of infection is the mammary gland. The infectious agent enters through the milk canal, interacts with the mammary tissue/cells and multiplies. Most contagious mastitis causing pathogens are spread during milking. Most other species are opportunistic invaders from the cow's environment.

It was believed that the construction of large dams in the upper tributary basin of the Chao Phraya River (CPR) has caused sediment load reduction in the CPR system by 75–85%. Based on historical and observed river flow and sediment data measured during 1922–2019, we investigated the effects of three large dams, the Sirikit, Naresuan, and Khwae Noi dams, on river runoff and sediment loads supplied to the CPR using Mann-Kendall (MK) test and the double mass curve (DMC). Results from this study revealed that the Nan River contributed approximately 40% and 57% of the runoff and total sediment load (TSL) to the CPR, respectively. The water regulation by the Naresuan diversion dam has mainly caused the reduction on annual runoff and TSL downstream of each dam. The results from this study also reveal that the sediment load observed at the headwater (C.2) of the CPR still increased after the construction of the Sirikit dam due to the expansion of irrigation areas downstream of the dam and the channel improvement in the lower reach of Nan River. After the three major dams were operated, the sediment load at C.2 reduced by 31% compared that discharging during the pre-construction period.

With increasing interest in understanding contribution of secondary organic aerosol (SOA) to particulate air pollution in urban areas, an exploratory study was carried out to determine levels of carbonaceous aerosols and polycyclic aromatic hydrocarbons (PAHs) in the City of Kuala Lumpur, Malaysia. PM2.5 samples were collected using a high-volume sampler for 24 h in several areas in Kuala Lumpur during the north-easterly monsoon from January to March 2019. Samples were analysed for water soluble organic carbon (WSOC), organic carbon (OC), elemental carbon (EC) and secondary organic carbon (SOC) in PM2.5 was estimated. Particle-bound PAHs were analysed using gas chromatography-flame ionization detector (GC-FID). Average concentrations of WSOC, OC and EC were 2.7 ± 2.2 (range of 0.63-9.1) µg/m3, 6.9 ± 4.9 (3.1-24.1) µg/m3 and 3.7 ± 1.6 (1.3-6.8) µg/m3, respectively, with estimated average SOC of 2.3 µg/m3, contributing 34% to total OC. The average of total PAHs was 1.8 ± 2.7 ng/m3. Source identification methods revealed natural gas and biomass burning, and urban traffic combustion as dominant sources of PAHs in Kuala Lumpur. To understand human health risk posed by PAHs, a deterministic screening health risk assessment was also conducted for several age groups including infant, toddler, children, adolescent and adult. The total concentration of BaPeq is 3.8 ng/m3, with the average of 0.29 (range of 0.001-1.6) ng/m3. Carcinogenic and non-carcinogenic risk of PAH species were well below the acceptable levels recommended by the USEPA. Future work is needed using long-term monitoring data to understand the origin of PAH contributing to SOA formation and to apply source-risk apportionment to know better the potential risk factors posed by the various sources in urban areas in Kuala Lumpur.

The problem of normal impact of a rigid sphere onto a Maxwell viscoelastic solid half-space is considered. The first-order asymptotic solution is constructed in the framework of Hunter’s model of viscoelastic impact [Hunter, S. C., 1957. Energy absorbed by elastic waves during impact. Journal of the Mechanics and Physics of Solids, 5(3), 162–171.]. In particular, simple analytical approximations have been derived for the maximum contact force and the time to achieve it. A linear regression method is suggested for evaluating the instantaneous elastic modulus and the mean relaxation time from a set of experimental data collected for different impactors and impact velocities.

When bone substitutes materials are used, the increased risk of infection due to the none-autogenic graft is often discussed. The treatment of large bone defects in geriatric patients, often with osteoporotic bone, often presents major challenges to surgery. Bone substitutes materials are available indefinitely without the risk of additional surgery in each patient. Can bone substitutes materials be used without hesitation in the geriatric patient?Eighty-three patients suffered traumatic fractures of the distal radius, proximal humerus, and proximal tibia. The defect zones were filled with bone substitute material based on nanocrystalline hydroxyapatite (NHA) or calcium phosphate (CP). For comparison, a reference group without the void filling with a bone graft substitute (void defects, ED) was studied. All patients over the age of 64 years were retrospectively evaluated for complications and radiological outcomes. Results: 106 patients sustained traumatic fractures of the distal radius (68.9%), proximal humerus (5.7%), and proximal tibia (22.6%). No differences in infections were found when comparing the groups (p=1.0). retrospectively evaluated. The KEM group had a nonsignificantly lower rate of pseudarthrosis (p=0.09). A relative risk (RR) reduction of complications of 32.64% was observed when bone grafting material was used. The NNT for the prevention of complications was 5.99. When bone healing was assessed by radiological images, some follow-up studies showed significant differences in fracture bridging (p<0.001).Conclusions: In contrast to previous studies, bone substitutes materials can support the healing process in geriatric patients without relevant disadvantages. With an NNT of 6 regarding complications, many patients could benefit from bone graft augmentation. No increased infection rate was observed.

When bone substitutes materials are used, the increased risk of infection due to the none-autogenic graft is often discussed. The treatment of large bone defects in geriatric patients, often with osteoporotic bone, often presents major challenges to surgery. Bone substitutes materials are available indefinitely without the risk of additional surgery in each patient. Can bone substitutes materials be used without hesitation in the geriatric patient? Eighty-three patients suffered traumatic fractures of the distal radius, proximal humerus, and proximal tibia. The defect zones were filled with bone substitute material based on nanocrystalline hydroxyapatite (NHA) or calcium phosphate (CP). For comparison, a reference group without the void filling with a bone graft substitute (void defects, ED) was studied. All patients over the age of 64 years were retrospectively evaluated for complications and radiological outcomes. Results: 106 patients sustained traumatic fractures of the distal radius (68.9%), proximal humerus (5.7%), and proximal tibia (22.6%). No differences in infections were found when comparing the groups (p=1.0). retrospectively evaluated. The KEM group had a nonsignificantly lower rate of pseudarthrosis (p=0.09). A relative risk (RR) reduction of complications of 32.64% was observed when bone grafting material was used. The NNT for the prevention of complications was 5.99. When bone healing was assessed by radiological images, some follow-up studies showed significant differences in fracture bridging (p<0.001). Conclusions: In contrast to previous studies, bone substitutes materials can support the healing process in geriatric patients without relevant disadvantages. With an NNT of 6 regarding complications, many patients could benefit from bone graft augmentation. No increased infection rate was observed.

COVID‑19 pandemic, also known as the coronavirus pandemic, has spread rapidly across the globe since the end of 2019 and brought impressive changes in our life and living through partial or full lockdown and reduced anthropogenic activities. Hence, it is imperative to investigate the impacts and consequences of COVID-19 on global eco-system and environment. The present study accordingly addresses the impacts and consequences of COVID-19 by ten environmental indicators; viz., global warming (or greenhouse gas emission), stratospheric ozone depletion, ozone formation (on human health), fine particulate matter formation, smog, ionizing radiation, human carcinogenic toxicity, human non-carcinogenic toxicity, water resource consumption, and effect on human health. The overall study has been performed in agreement with the standard principle and guidelines of life cycle assessment. Worldwide changes in consumption of fossil fuels, viz., petroleum, coal and natural gas, as a result of COVID-19 pandemic, has been the core theme of the study. Outcomes from the study show that COVID-19 has been a ‘blessing in disguise’ for the global environment with most of the above-mentioned indicators declining by approximately 20-30% in 2020 in comparison to the 2019 level.

This research delves into the intricate dynamics underlying the impact of investments on global output, em-ploying the Leontief matrix as a robust analytical framework. Investments wield a profound influence on economies worldwide, with varying effects contingent upon investment types, development levels of coun-tries, and external factors such as trade conflicts and global shocks. The diverse range of investment forms, including physical capital, human capital, R&D, and technological investments, engenders distinct implica-tions for productivity, innovation, and efficiency. Developing and developed economies navigate unique tra-jectories, with investments playing a pivotal role in bridging infrastructure gaps, improving technology, and spurring growth. However, external disruptions, such as trade wars and global shocks, introduce an element of complexity, reshaping investment patterns and altering global output trajectories. This study centers on harnessing the Leontief matrix's prowess to evaluate the interplay of investments and global output, focusing on the Romanian economy. By analyzing input-output tables, encompassing 105 branches aggregated into 10 sectors, the research captures the intricate connections between economic segments. No-tably, the Romanian context reveals the volatility of the matrix coefficients', an outcome of ongoing transi-tional processes, technological advancements, and fluctuating relative prices. In unraveling the intricate threads weaving investments and global output, this study contributes to a nuanced comprehension of these multifaceted interactions. The findings underscore the significance of tailoring investment strategies to specific economic contexts and advocate for robust frameworks, such as the Leontief matrix, to inform pol-icy decisions and drive sustainable growth in an increasingly complex global economy.

The size of the home is considered the most critical issue affecting the quality of life. This can be measured by the quality of the house and its environment. This paper highlights the housing quality index at the urban axis level in Bistrita-Nasaud county and the impact of socioeconomic activities on the index. The Household Quality of Life Index (HQLI) was calculated based on 11 variables. Household quality of life comprises two distinctive indices: the Housing Conditions Index (HCI) and the Asset Possession Index (API). The study found a variation in the housing condition variables across the urban focus areas. The impact of the socioeconomic environments is disproportionately dependent on the social-economic profile of the urban environments that make up the Urban Axis and the related economic activities that take place in the area of influence in the administrative-territorial units and the variability of the Housing Conditions Index This can be measured by the quality of the house and its environment. This paper highlights the housing quality index at the urban axis level in Bistrita-Nasaud county and the impact of socioeconomic activities on this index. The study area comprises territories in the municipality of Bistrita. The socio-economic context of the area has been the basis for understanding the patterns of evolution identified in the urban landscape, and being a driver in ongoing urban transformations and processes. The impact of the socio-economic is disproportionate to the socioeconomic profile of the urban environments that make up the Urban Axis and the economic activities related to the economic activities taking place in the catchment area in the administrative-territorial units, hence the variability of the Housing Conditions Index which is a system Housing Quality Indicator (HQI) is a tool for measuring and evaluating housing systems based on quality and not just cost.

Emergence of COVID-19 had profound impact on global stock markets, including Indian mar-ket. Key indices like NIFTY50 and Sensex dropped by approximately 40% within two months in 2020, which also affected major mutual funds, leading to significant depreciation of their Net Asset Value. Securities and Exchange Board of India (SEBI) allows mutual funds to use deriva-tives for hedging purposes, capped at 100% of the scheme's net assets covering debt, equity, and derivatives. However, circular amendment by SEBI in January-2019 permitted covered call strat-egies on constituent stocks of Sensex and NIFTY50 for mutual fund schemes, excluding ETFs and Index Funds. This study investigated whether mutual funds increased their derivative us-age as risk mitigation strategy during COVID-19 pandemic, analyzing derivative holdings from 2019-2023. Surprisingly, findings indicated a decline in derivative holdings in 2020 compared to pre-pandemic levels. Statistical tests and performance evaluation metrics such as T-test, F-test, Treynor Ratio, Sharpe Ratio, and Jensen's calculations were employed to assess mutual fund performance. Although derivative-holding mutual funds didn't outperform benchmarks in aver-age returns, it showcased significantly reduced volatility, offering investors favorable risk-return trade-offs. research sheds light on derivative utilization in Mutual Fund industry, potentially in-forming regulators, fund managers, and investors in their decision-making

A discharge mixing zone (DMZ) is a defined geographical area or volume of water in the receiving environment of a discharge where initial dilution of the effluent occurs and where exceedance of water quality criteria may be permitted. DMZs are essential to inform determination of discharge consent conditions and an important element of risk management frameworks to reduce any effects of the discharges on the environment and human health. In this review, we describe the principles and technical application of DMZs. We present an overview of the physical processes that govern the dispersion and dilution of wastewater discharges and the fate of contaminants in coastal environments and define key criteria for determining the size of DMZs. We summarize DMZ requirements in international legislation and guidance and exemplify their application to different types of discharges by means of case studies. The selected case studies illustrate different modelling tools for defining DMZs and different monitoring approaches to assess their effectiveness in achieving ecological and human health objectives.

The broad and rapid application of new genomic techniques (NGTs) such as CRISPR-Cas has led to a fast increase in the number of genetically modified crops. With the recently published EU Commission’s (EC) regulatory proposal on plants generated with NGTs (July 5, 2023) the process of admission of such genetically modified plants is aimed to get accelerated and simplified. NGT plant applications shall be categorized based on their molecular characteristics into category 1 NGT (NGT1) and category 2 NGT (NGT2), which is in divergence from the current legislation centered around Directive 2001/18/EC. In the regulatory proposal NGT2 plants are envisioned to undergo a reduced risk assessment while for NGT1 plants no risk assessment is foreseen at all. To demonstrate were the path of the proposal leads to in practice, we applied the proposed criteria for categorization to a list of NGT plant applications that are currently in the commercialization pipeline. A key finding is that out of those plant applications affected by the EC proposal, 94% would be classified as NGT1 and thus would receive a market approval without risk assessment, monitoring and sufficient labeling provisions. The remaining 6% of applications would be classified as NGT2 plants for which, in deviation from the current regulation, an adapted risk assessment is proposed. A screening of intended traits in the pipeline highlights that certain NGT1 plants can pose similar environmental risks (e.g. invasiveness) compared to other genetically modified organisms (GMOs), as defined in Directive 2001/18/EC. For example, NGT1 applications based on RNAi technology can exhibit insecticidal effects with potential side effects on non-target organisms (i.e. other insects). Our quantitative and case-specific elaboration on how the current EC regulatory proposal would affect the environment, health or consumer protection will be informative for decision makers and politicians.

This paper identifies the characteristics of the farmer that affect the degree of farmer’s perceived-impact of climate change (CC). We use data from the Indonesian Rice Farm Household survey consisting of 87,330 farmers. An ordered probit regression model was used to estimate the effect of each variable on the degree of perceived-impact of CC. The results of this study confirm the previous empirical studies. Several variables that have been identified as having a positive effect on farmer adaptation practices such as farmer education, land tenure, irrigation infrastructure, cropping system, chemical fertilizer application, access to extension services and participation in farmer group affect the degree of CC perceived-impact negatively. However, a different result was found in the estimation of the gender variable. We found that female farmer has a higher resilience toward CC than the male farmer does. Furthermore, the female farmer has a more positive perception about future farming conditions than the male does. Finally, we suggest that the implementation of national adaptation policy should prioritize more to the farmer with insecure land tenure and utilize and expand the channel of agricultural extension services to deliver the planned adaptation policy.

The decreasing width, increasing aspect ratio RDL presents significant challenges to design for reliability (DFR) of advanced package. Therefore, this paper proposes a ML based RDL modeling and simulation method. In the method, RDL is divided into blocks and subdivided into pixels of metal percentage, and the RDL is digitalized as tensors. Then, an ANN-based surrogate model is built and trained by a subset of tensors to predict the equivalent material properties of each block. Lastly, all blocks are transformed into elements for simulations. For validation, line bending simulations were conducted on an RDL, with the reaction force as accuracy indicator. The results show that neglecting layout impact causes critical errors as substrate thins. By the method, the reaction force error is 2.81% and the layout impact can accurately be considered with 200×200 elements. For application, the TCT maximum temperature state simulation was conducted on a CPU chip. The simulation indicates that for advanced package the maximum stress more likely occurs in RDL rather than bumps, both RDL and bumps are critical impacted by layouts, and RDL stress is also impacted by vias/bumps. The proposed method precisely concerns layout impacts with little resources, presents an opportunity of efficiency improvement.

(1)Background: To perform a simulation-based analysis of 2019 COVID-19 outbreak and how would the electronic commerce indursty help China’s economy resilient. (2)Methods: As the epidemic continues, it is possible to use Computable General Equilibrium model to simulate the economic consequences and analyse the role of electronic commerce industy in COVID-19 outbreak. (3)Results: Estimates and models produced at the time of the outbreak suggested that COVID-19 could have a catastrophic effect on China’s economy. National statistics were examined for anomalies that corresponded to the timing of COVID-19 outbreak and, where possible, the size of any gain or loss found estimated. Our analysis suggests that the electronic commerce industry could help China’s economy to recover by stimulating consumption, improving technological level and expanding investment. (4)Conclusions: This exercise holds important lessons for estimating the electronic commerce’s role of similar events – such as pandemic influenza – and measures to recover the economy. We suggest that electronic commerce industry should be paid more attention in economic development, especially in epidemic time. The implications of our findings are discussed in the light of a prospective epidemic.

This paper aims to provide an evaluation of how Value Added Tax (VAT) policy alterations influence market liquidity, trading volume, and stock performance. To fill the existing literature gap on the direct effect of (VAT) adjustments on stock market dynamic, particulate within the banking industry. The study employs an event study methodology to analyse the immediate and medium-term effects on bank stocks listed in markets subject to a (VAT) adjustments. The core of the study analysis is anchored around two pivotal events, the initial application of (VAT) on 1st January 2018, and the subsequent (VAT) increase to 15% on 1st July 2020 using MATLAB R2022b. The study analysis encompasses the period immediately before and after the introduction and subsequent increase (VAT) in kingdom Saudi Ariba (KSA) employing an eleven sample comprises the (KSA) largest banks with a ±7 days window period from the event. The analysis revels that the imposition of 5% (VAT) lead a substation downturn in trading volume and stock returns of 9.5%, and 39.5%, subsequently. While when the (VAT) was increased by 15% the market exhibited a mixed but ultimately positive response of 3.3% trading volumes increases and 128.7% average stock return recovery.

Engineers make things, make things work, and make things work better and easier. This kind of knowledge is crucial for innovation, and much of the explicit knowledge developed by engineers is embodied in scientific publications. In this paper, we analyze the evolution of publications and citations in Engineering in a middle-income country such as Mexico. Using a database of all Mexican publications in Web of Science from 2004 to 2017, we explore the characteristics of publications that tend to have the greatest impact; this is the highest number of citations. Among the variables studied are the type of collaboration (no collaboration, domestic, bilateral, or multilateral), the number of coauthors and countries, the language of the article, controlling for a coauthor from the USA and the affiliation institution of the Mexican author(s). Our results emphasize the overall importance of joint international efforts and suggest that publications with the highest number of citations are those with multinational collaboration (coauthors from three or more countries), written in English, and when one of the coauthors is from the USA.

We present an updated design process for adapting and integrating existing cyber risk assessment approaches for impact assessment for the risk from IoT to the digital economy. The new design process includes a set of changes to the original standards (e.g. NIST) that are adapted for the IoT cyber risk in this paper. This paper also presents a new framework for impact assessment of IoT cyber risk, specific for the digital economy.

The opportunities and potential of Artificial Intelligence (AI) in Environmental Assessment (EA) are often mentioned. However, do we in the EA field understand the implications of what is happening in other biological sciences, and are we preparing for the changes that are coming? This interdisciplinary letter focuses on AI-driven developments in biodiversity data and analysis as a starting point for stimulating discussion about what AI means in practice for the field of EA. We highlight implications for training, transformation of practice and decision making as first steps in a research agenda.

Background: COVID-19 pandemic has pulled us all a few steps back, were we never shake hands or hug each other when we meet our friends and family after a gap, but instead we greet them by saying Namaste and joining our hands together. As we all know, COVID-19 spreads through air and the only way to shield ourselves is by maintaining a safe distance from one another. Methodology: In order to conduct a meta-analysis on the number of COVID-19 cases in Kerala and India, the data was retrieved from various sites hosted by the government bodies. The data for analysis was collected from May 2020 to July 2020. The average number of days required to reach every 5000 fresh cases were also calculated using this data. COVID-19 has affected all the economy holistically regardless of financial, behavioral, or societal aspects. Conclusion: Lifting of the lockdown in a step by step process keeping in mind the necessities for the nation was a thoughtful act, but the people who mistook this opportunity and did not remain in quarantine after coming from abroad was recognized as the reasons behind the sudden and uncontrolled rise in the number of COVID-19 cases in Kerala, India. The government authorities had no other option but to lift the restrictions to reduce the economic burdens that had already affected the daily wage worker and farmers prompting them to give up their lives.

[Research Objective] In the context of the rapid development of digital governance, understanding and analyzing the burden level of digital tools in the process of serving digital governance from multiple perspectives is an important prerequisite for improving the capacity and accuracy of government digital governance, promoting sustainable public participation, and maximizing digital value in the new era. [Research Method] By constructing a model of the burden of digital tools caused by technical, organizational and environmental factors on the public based on the TOE framework, using SPSS for data testing based on 275 research questionnaires, and using fuzzy set qualitative comparative analysis (fsQCA) to explore the linkage ways and paths of the burden-increasing effect of digital tools in a holistic perspective. [Research findings] does not constitute a necessary condition for high levels of digital tool affordances under a single condition, but improving users' digital literacy plays a more general role in optimising the efficiency of digital tool use. According to the results, there are five dominant patterns that have a significant impact, i.e. the driving paths that lead to high levels of digital tool affordability are characterised by a "homogeneous approach". In the cross-group study, significant differences were found in the driving paths of high digital tool affordability by group, depending on the level of digital tool mastery. This paper suggests that the government should continue to pay attention to affordability levels, rationalise the use of financial resources, improve the level of digital tool adaptation, and innovate the existing performance evaluation system for digital governance indicators.

This paper presents an in-depth study of the stress wave behavior propagating in a Rayleigh–Love rod with a sudden cross-sectional area change. The analytical solutions of stress waves are derived for the reflection and transmission propagation behavior at the interface of the cross-sectional area change in the rod, considering inertia and Poisson’s effects. Examples solved by the finite element method are provided to verify the correctness of the analytical results. In addition to the forward analysis of Rayleigh–Love wave propagation in rods impacted by a striker rod, a nondestructive testing method is proposed to conduct the defect assessment in the rod type of the structure component with a sudden cross-sectional area change within a cover medium by using the measured signals at the measurable zone of the rod to be inspected.

To investigate the structural behavior of simply supported concrete beams with steel and polypropylene fiber under low velocity impact loading. In all twenty-four beams (150X200X1800 mm) with simply supported boundary condition were modeled and analyzed using ABAQUS software. Steel and polypropylene fibers of aspect ratio of 60 and 231 respectively are used. The total volumes of fibers are maintained at 1% by volume of specimen. A 100 kg hammer with tip diameter 16 mm (hemispherical contact area = 201 mm2) with four different velocities (3.13 m/s, 4.42 m/s, 5.43 m/s and 6.11 m/s) were used in the analysis. It is observed that with the addition of hybrid fibers the deflection in beams was reduced. The beams with 1% PP and 0% steel fiber shows the maximum deflection values due to low modulus of elasticity. Beams with 0.9% steel and 0.1% polypropylene fibers was less affected in terms of deflection as compared to all other beams, it is due to presence of high tensile strength fibers.

The effect of the COVID-19 pandemic in a developing country like Bangladesh is enormous. A research conducted by South Asian network of Economic Modelling predicted that the pandemic could double the poverty. But it is not that only the socioeconomic condition is dropping in Bangladesh, the impact of COVID-19 pandemic is manifold. The poor condition of Bangladesh's health sector has also been exposed due to the pandemic. People are not getting proper treatment due to lack of isolation beds, oxygen, ICU etc. The health sector of Bangladesh is not much developed and now with this pandemic it has become impossible to provide treatment facility for all the patients. Education sector, which is the backbone of a country,has also been greatly affected by the pandemic. We know that different types of cultural occasions are an inherited tradition of Bangladesh, COVID-19 have not even spared these traditions, all the cultural programes and festivals have been cancelled due to this pandemic.In this paper, our aim is to present the present status of all these sectors.

Based on the total scholarly article output of Norway, we investigated the coverage and degree of openness according to three bibliographic services 1) Google Scholar, 2) oaDOI by Impact Story and 3) 1findr by 1science. According to Google Scholar, we find that more than 70% of all Norwegian articles are openly available. However, degrees are profoundly lower according to oaDOI and 1findr, respectively 31% and 52%. Varying degrees are mainly caused by different interpretations of openness, with oaDOI being most restrictive. Furthermore, open shares vary considerably by discipline, with the Medcine and Health sciences at the upper and the Humanities at the lower end. We also determined the citation frequencies using Cited-by values as of Google Scholar, applying year and subject normalization. We find a significant citation advantage for open articles. However, this is not the case for all types of openness. In fact, the category Open Access journals was by far lowest cited, indicating that young journals with a declared open access policy still lack recognition.

The silver fir (Abies alba Mill.) is among the most valuable conifers in Europe for ecological and economic reasons. In the course of history, primarily in the 20th century, its share in stands has been declining due to ill-suited management practices, especially clear-cut management, air pollution, and wildlife-induced damage. Based on recent knowledge of fir ecology and population dynamics, small-scale shelterwood and selection management have been introduced in fir stands, which have also stabilized them. Fir is an essential species for maintaining high stability and biodiversity, especially on planosols and in waterlogged habitats. Due to its shade tolerance and environmental flexibility, particularly at higher altitudes, it can coexist very well with many tree species in mixtures, which can increase the productive potential of stands. It can form stands of heterogeneous structure, ranging from single to multi-layer to selection. For its successful natural regeneration, it is essential to reduce cloven-hoofed game and thus prevent bud browsing damage. On the other hand, fir is a species relatively resistant to bark stripping and the spread of secondary rot compared to Norway spruce (Picea abies [L.] Karst.). During global climate change, fir is expected to shift to higher elevations with sufficient precipitation, while in the southern part of its natural range or at lower elevations, outside water-influenced habitats, it is likely to decline. This paper essentially reviews the description and distribution of the species, its ecological requirements, threats and diseases, habitat and stand conditions, and close-to-nature forest management practices with emphasis on ongoing climate change.

We present the prototype and analytical model of a miniaturized impact actuation mechanism, providing a fast out-of-plane displacement to accelerate objects against gravity, allowing for freely moving objects and hence for large displacements without the need of cantilevers. To achieve the necessary high speed, we chose a piezo electric stack actuator driven by a high-current pulse generator, connected to a rigid support and a rigid three-point contact with the object. We describe this mechanism with a spring-mass model and compare various inertial masses, all of them spheres, from different diameters and materials. As expected, we found that larger flight heights are achieved by harder projectiles, achieving, e.g., approx. 3 mm displacement for a 3 mm steel sphere using a 3x3x2 mm³ piezo stack.

Introduction: Due to COVID-19 pandemic, performance of many program has been declined and Tuberculosis (TB) program is not an exception. TB case detection and notification has been recognized as one of worst hit area. The objective of this study was to explore the TB notification status of India during this pandemic and explore options to mitigate the issue. Methods: A secondary data analysis was performed on open source TB notification database of India. Relevant literature review was done to find out remedies based on the different initiative taken by different states of India. Results: In 2020, total TB notification decreased in all the states in comparison to 2019. The percentage of loss in the country was 34%. Private TB notification also decreased in 2020 in all the states except in Jharkhand. The percentage of loss in private TB notification in the country was 35%. Notification started declining in the month of February 2020 and it was lowest in the month of April-2020. The trend of notification began to improve since May 2020 when the States started taking innovative initiatives like Integrated TB Covid Case Search. Conclusion: Due to the ongoing COVID-19 pandemic the notifications of TB cases declined noticeably which has a serious implication in terms of silent spread within household and community. But the picture can be improved with integrated approach for TB-COVID case finding and management.

This study investigates the impacts of climate change policies on businesses across various sectors, aiming to understand how these regulations affect operational, financial, and strategic aspects of business management. Utilizing a mixed-methods approach, data was collected from 500 businesses through surveys and interviews, encompassing a wide range of industries, sizes, and geographic locations. The findings reveal a complex landscape where 30% of businesses report positive impacts, primarily in the renewable energy and technology sectors, citing increased demand for green products and improvements in energy efficiency. Conversely, 45% of businesses, especially from manufacturing and agriculture, experience negative impacts, including increased operational costs and regulatory compliance challenges. Notwithstanding, a significant majority of businesses are committed to enhancing their sustainability practices, viewing climate change policies as an opportunity for innovation and long-term growth. The study highlights the nuanced effects of climate change policies, emphasizing the need for sector-specific support measures to alleviate financial and operational burdens on negatively impacted businesses. Moreover, it points to a broader shift towards sustainability within the business community, suggesting that climate policies, despite their varied impacts, are driving significant changes in business strategies towards environmental stewardship.

The integration of AI in educational settings, particularly through Large Language Models (LLMs), is accelerating, reshaping pedagogical approaches due to students' interactions with new learning tools. This study assesses the impact of generative AI on the educational experiences of computer and data science students at the Center for Informatics, University of Paraíba (CI/UFPB), Brazil. Through Exploratory Factorial Analysis (EFA) of five psychometric scales, the research examines students' acceptance of LLMs, their associated burnout levels, technology anxiety, and the prevalence of metacognitive and dysfunctional learning strategies associated with LLMs. Results indicate significant adoption of AI technologies among students, accompanied by a low incidence of technology anxiety, manifesting as fears of losing jobs to AI. However, a significant correlation was observed between academic burnout and dysfunctional learning strategies, which could likely be attributed to the rigorous academic environment. Additionally, the employment of metacognitive strategies in conjunction with LLMs reflects an advanced learning approach, yet challenges with functional learning strategies persist. This study contributes to the discourse on AI in education, highlighting the need for educational frameworks that support effective AI adoption while addressing the psychological demands on students.

Impact force and maximum velocity are important indicators of kick efficiency in fighting activities. Therefore, this systematic review compared the front kick (FK) and roundhouse kick (RK), including maximal and impact force, maximum velocity, maximum angular velocity, and execution time, at different target types and experience levels. The Web of Science, SportDiscus, and PubMed were systematically searched from January 1982 to May 2022, according to PRISMA guidelines. The normalized kicking values were compared using one-way ANOVA. Eighteen articles, including FK with a pooled sample of 113 elite men, 109 sub-elite men, and 46 novices, and 25 articles, including RK with a sample of 238 elite men, 143 sub-elite men, and 27 novice men, fulfilled the inclusion criteria. The primary findings were that the impact forces of FK were higher than RK for the novice, sub-elite, and elite groups by 47% (p<0.01), 92% (p<0.01), and 120% (p<0.01), respectively. Moreover, the maximum foot velocity of RK was faster than FK for the sub-elite and elite groups by 44% (p<0.01) and 48% (p<0.01), respectively. The Elite group had 65% (p<0.01) higher knee extension angular velocity within RK than FK, and 138% (p<0.01) higher hip extension angular velocity within FK than RK.

Although agricultural crops production systems in subtropical plateau regions currently pose high environmental risks, especially in developing countries, their environmental impacts and emission-reduction potentials remain unclear, and the development potential of such systems is likely huge. We conducted a case study in Yunnan Province, China, to quantify the environmental impacts from crop production during 2002–2021. The life cycle assessment method was employed to identify factors driving the environmental impacts, and potential mitigation strategies were proposed. The yield and total nutrient input of grain crops in Yunnan Province increased over the 20-year period, and environmental footprint of crops production in Yunnan Province was higher than that of other regions. Average annual mean greenhouse gas (GHG) emissions and soil acidification potentials (AP) and water eutrophication potentials (EP) of crops production during 2002–2021 were 732 kg CO2-eq·Mg-1, 15.8 kg SO2-eq·Mg-1, and 2.7 kg PO4-eq Mg-1, respectively. GHG emissions from g crops mainly originated from applying agricultural materials during the crop life cycle. There was a significant correlation between surplus nitrogen and environmental impacts. Scenario testing showed that through crop sowing, nutrient regulation, and crop management, the crop yield could be increased and environmental costs could be reduced. The greatest reductions were found in wheat production: 53.1%, 67.9%, and 67.7% for GHG emissions, AP, and EP, respectively. Adopting comprehensive agricultural management measures could reduce the negative impact of crops production on the environment in subtropical plateau areas and achieve sustainable agricultural development.

Malaysia implemented a movement control order (MCO) to curb the spread of the SARS-CoV-2 virus in March 2020. Despite healthcare services remaining operational, rising COVID-19 infections and MCO restrictions have forced healthcare professionals to seek a compromise between service capacity and standard operating procedure compliance. A cross-sectional survey was conducted among public and private sector doctors, dentists and pharmacists to determine how lockdown measures impacted healthcare services. Responses from 413 doctors, 193 dentists, and 163 pharmacists were analysed. Pharmacy services remained mostly unaffected throughout the MCO. In contrast, operational capacities for surgical and dental services were severely affected during the MCO. All service sectors reported restricting patients or accompanying individuals at the workplace, reductions in staffing capacity, and shortened patient contact time at various degrees. Many pharmacy and medical participants reported supplying extended medication supplies to patients. Adoption of virtual healthcare services was generally poor. All private service sectors suffered financial losses ranging between 59 to 75%. Periodic assessments of the healthcare system throughout the pandemic are required to identify which patients have their treatment compromised so that healthcare managers and policy makers can plan and implement appropriate interventions that help alleviate pressure within the health system.

This study evaluates various safety aspects of standardized impacts that cyclists may suffer while wearing a bicycle helmet, by combining a partially validated finite element model of the cranio-cervical region and a newly developed bicycle helmet model. Under EN 1078 standardized impact conditions, the results of simulated impact tests show that the helmet can absorb 40% to 50 % of the total impact energy at impact velocities above 4 m/s. Further, based on a relationship between Head Injury Criterion and the risk of injury from field data, the results of the simulations suggest that minor injuries may occur at impact velocities of 10 km/h, serious injuries at 15 km/h, and severe injuries at 20 km/h. Fatal injuries will likely occur at impact velocities of 30 km/h and higher.

This research investigates the fatigue crack propagation on the lower surface of rocket deflector troughs of offshore rocket launch platforms. Initially, a numerical model of the offshore rocket launch platform is established using ABAQUS based on the Extended Finite Element Method (XFEM). Subsequently, two variable parameters—namely, the initial crack length and initial tilt angle—are introduced. This research systematically analyzes the impact of these parameters on fatigue crack propagation patterns in both the maximum stress and maximum deformation regions of the deflector channels under the combined conditions of high temperature and impact. Finally, the research indicates that the propagation length of surface cracks in the deflector trough exhibits a trend of initial increase followed by a subsequent decrease with the increase in the preset inclination angle. Notably, the stable propagation rate of the crack in the region of maximum deformation surpasses that observed in the region of maximum stress. Through meticulous comparative analysis, it is evident that temperature loading significantly fosters the initiation and propagation of cracks, particularly in the upper region of the deflector channel's lower surface.

The relationship between child psychology and the widespread usage of mobile devices in the modern day is examined in "The Mobile Dilemma: Child Psychology and the Era of Technological Dependence." The abstract serves as a brief synopsis of the work, highlighting its important ideas and arguments. Concerns concerning the effects of excessive time spent on mobile devices on children's mental health and development have arisen in this age of technology dependency. The essay opens by pointing out the importance of investigating the psychological effects of kids' exposure to mobile gadgets. The effects of mobile phone addiction on learning, memory, and social and emotional health are investigated. The neurodevelopmental implications are explored further in the abstract, with a focus on the impact of mobile technology on brain plasticity and the formation of the developing brain. It offers advice on how to establish appropriate limits for children's screen time, encourages the development of digital literacy, and promotes responsible behavior.The pros and cons of using mobile devices in the classroom are also examined, along with their effects on students' ability to study and the risks and difficulties that could arise from implementing such a strategy. The emotional and social impacts of mobile device addiction are discussed in the abstract. This includes the impact on one's social life, empathy, ability to communicate, and sense of self-worth. The abstract also stresses the importance of interdisciplinary efforts involving parents, teachers, psychologists, and legislators to combat mobile device addiction through intervention and preventative techniques. Future directions are highlighted, with a focus on topics such as mobile technology development, digital well-being, privacy protection, mental health implications, screen time limits, digital literacy, and the impact of cultural and socioeconomic variables.

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), also known globally as COVID-19, originated in December 2019 in Wuhan, Hubei province in China and has rapidly spread across the globe ever since. The first recorded case in sub-Saharan Africa was in Nigeria, on the 25th February, 2020. The virus continues to spread, and new variants of the disease have emerged, the number of deaths and new infections in the countries of sub-Saharan Africa has been relatively low compared to predictive models. This could be due to several factors, such as slower transmission dynamics of the virus, a lower-case fatality rate, or a lack of testing or reliable data. Whilst this may also, in part, be due to the robustness of the nations' public health responses, there is scarce reporting on the specifics of this. However, emerging research has demonstrated that various environmental factors could influence virus transmission. The study adopted collected meteorological data that was critically analysed and discussed. The impact of three factors in the context of sub-Saharan African nations: temperature, ultraviolet (UV) exposure and pre-existing infection with Plasmodium (malaria) were discussed. These factors were discussed critically in light of the reduced rates of transmission and mortality observed.

Tourism may not sustainably support territories with limited natural resource stock as islands. The volume in visitor arrivals and the industry investments can increase the pressure even beyond sustainable levels. There is an evident and unresolved tension between these two great polarities, sustainability and economic growth driven by tourism. The aim for policymakers is to find an acceptable equilibrium between these two dimensions. This paper investigates the tourism evolution between 2007 and 2019 in 15 Mediterranean islands, comparing the tourism pressures through statistical indicators. The analysis will compare tourism demand and supply trends in these contexts. The performances will be evaluated to identify the Islands positioning between sustainability needs and tourism development opportunities considering post-covid-19 challenges.

The COVID-19 has caused gigantic negative effects on populace wellbeing, society, education, and the economy in Bangladesh. The aim is to deliver a comprehensive overview of the observed and the possible impacts that could appear in the coming days. The study is based on secondary information. During the early period, due to a lack of accurate facts about the case affected and death tension up-and-down among the nations. The total number of confirmed cases is increasing following geometric patterns in Bangladesh. Dairy farmers, vegetable producers, pharmaceuticals, poultry farmers are in deep crisis due to lower prices. Also, the pandemic has seriously affected educational systems, banking, FDI, ready-made garments, remittances, etc Finally, it is not possible to mitigate the effects of pandemic individually but the integrated effort from the state authority as well as concern people of all sectors need to come forward.

Aflatoxins are a known cause of primary liver cancer in Mozambique since pre-independence epidemiological studies. However, their impact goes beyond the public health, affecting the country’s economy and raising legal concerns. As a developing country endemic for Aspergillus, the nation has been struggling to keep pace with external trade quality demands, delicate policy making, still dealing with the farmers’ limitations to control the contamination. The contamination shows variations over time, space and the different commodities. Considering the recommendations of the Codex Alimentarius, the major crops will be highly implicated unless there is major intervention from the authorities to control the toxins.

This article is devoted to discussing the famous Impact factor citation suited to indicate the published scientific result's significance. Considering this problem based on the available statistical data, we demonstrate that: Impact factor follows a distribution having a heavy power tail that may lead to inconsistency in scientifically comparable journals' evaluation. Further, we remark that many papers recognized as sleeping and seemingly sleeping beauties are not considered when calculating. This makes the impact factor unsuitable in evaluating the original, groundbreaking discoveries and their consequences. Due to permanent changes in the composition of the underlying datasets, the impact factor can not be considered as a reliable indicator and to be used as a consistent evaluation metric. Overall, discussing all represented impact factor obstacles and other appropriate considerations, we conclude that the considered index can hardly be used as a reliable estimator of the publication's significance.

The present investigation is focused on the forecasting visual observation of the impact of anthropogenic activity on the pilgrimage places located along the coastal environments in Tamil Nadu, India. Devotees performing the unregulated ritual ceremonies, open defecation, waste materials dumping and local municipality discharging wastewater contamination levels were assessed from direct visual surveillance, and by taking photographs and baseline information collected from five different pilgrimage sites. Results showed that ritual ceremonies, wastewater discharges and debris highly contaminated site-III, and found open defecation at site-I. The lack of coastal regulation, pollution awareness, insufficient sanitation facilities and failure to control the commercial and recreational activities have major deleterious effects on the present and future environments of the coastal areas. This is the first attempt conducted by visual assessment of the coastal pollution in pilgrimage places. The results immensely support the recommendation for proper regulation of ritual activities, arrangement of basic sanitation facilities and prohibition of wastewater discharges to prevent waterborne diseases as well as to strictly follow the regional and national level of coastal regulation policy to protect the biological resources of the Gulf of Mannar marine ecosystems.

The study presents an efficient computational investigation on the behaviour of the direct-drive system integrated into the offshore 5MW NREL wind turbine model under demanding aerodynamic loading conditions with the aim of optimising and developing more sustainable key structural components. The research was based on computational simulation packages to verify the use of real-world wind data, the loading conditions on the blade structures through aero-elastic simulation studies, as well as analyse the behaviour of the drive system. Through the application of validated aerodynamic loading conditions, resulting normal forces on the blades structure were obtained and applied to a dedicated simplified model that was also previously validated, to estimate the transferred loads into the powertrain. The adopted methodology allowed for the identification of shaft misalignment induced air-gap eccentricity. The impact of shaft deflections on resulting magnetomotive force was considered by making use of the Maxwell stress distribution expression. By taking into account the resulting loading cases on the generator structure, as well as the inherent typical loads generated by the electrical machine, a procedure including structural parametric and topology optimisation was developed and performed, achieving a rotor mass reduction between 8.5 and 9.6% if compared with the original model.

This study investigates the prevalence, causes, and spatial distribution of Abandoned, Lost, or Discarded Fishing Gears (ALDFGs) in the Gulf of Gabès, a critical fishing area in Tunisia. Five main fishing gear types—benthic trawls, encircling nets, longlines, gillnets, and trammel nets were analyzed for their loss rates and contributing factors. The study involved extensive surveys among local fishermen using geographic information system (GIS) tools for spatial mapping. The findings reveal varying loss rates among different gear types, with longlines experiencing the highest losses (59%), followed by trammel nets (45%), gillnets (40%), trawls (38%), and encircling nets (36%). Causes of gear loss include entanglement on obstructions, conflicts with other fishing gears, entanglement with marine animals, adverse weather conditions, and intentional dumping at sea. The study highlights the challenges posed by the consistent increase in regional fishing efforts. Spatial distribution mapping indicates two significant concentrations of ALDFGs, correlating with specific fishing activities and depths. The study emphasizes the importance of addressing gear losses as a threat to marine biodiversity and ecosystem health. Recommendations for mitigation include improving boat equipment, raising awareness among fishermen, implementing effective waste management, and exploring economic incentives for ALDFG recovery. This research contributes essential insights for fisheries management, environmental conservation, and sustainable practices in the Gulf of Gabès. Collaborative efforts are crucial to developing and implementing strategies that minimize the impact of ALDFGs on the marine environment while supporting the socio-economic interests of fishermen.

Background: The COVID-19 pandemic has hit the Spanish economy hard. The result is an unprecedented economic and social crisis due to uncertainty about the remedy, and due to the socio-economic effects on people’s lives. Methods: We performed a retrospective analysis of the macro-economic impact of COVID-19 in 2020, using the principal indicators of the Spanish economic and productive model. National statistics were examined in the search for impacts or anomalies occurring since the beginning of the pandemic. To estimate the strength of the impact on each of the indicators analysed, we used Bayesian structural time series. Results: In 2020, the cumulative impact on the Gross Domestic Product was of -11.41% [95% credible interval: -13.46; -9.29]. The indicator for Business Turnover fell by -9.37% [-12.71; -6.07]. The reduction in business activity was related to the sharp fall in demand. The Spanish employment market was strongly affected; our estimates showed a cumulative increase of 11.9% [4.27; 19.45] in the rate of unemployment during 2020. The autonomous communities which are economically the most heavily dependent on the services sector were those which recorded the worst indicators. Conclusions: Our estimates portray a dramatic situation in our country, and show all too clearly the fragility of a productive system which has to make the behavioural changes that are necessary to confront the COVID-19 pandemic.

This article aims to investigate gaps in the law and policies on e-waste management in communi-ties of Thailand and suggests a guideline for improving, developing, and designing legal measures and state policies for more effective enforcement of the law on e-waste management in communities. The findings reveal that the currently applicable law of Thailand lacks effective approaches and rules for e-waste management. Also, there is not any implementation of key envi-ronmental principles for e-waste management in communities, such as the Polluter Pays Principle (PPP) that requires manufacturing companies to take part in being responsible for disposal ex-penses or the Public Participation principle that requires users, manufacturers, distributors, and government agencies to take parts in disposing e-waste. As a result, problems of e-waste in com-munities of Thailand have been continuously increasing. According to such problems, the authors suggest that legal measures on e-waste management in communities should be specifically de-signed by implementing key environmental principles as a basis in determining formats and guidelines of e-waste management, especially participation of all sectors that can help in solving and reducing e-waste in communities that is harmful to health, sanitation, and environment.

During the Covid 19 pandemic, we saw a huge impact on the lives of individuals in cities. The way people responded was controlled and limited. The lockdown restricted a lot of movements in the cities as well as contained the citizens in their houses. Through a semi-structured interview, the research aims to understand the change in behaviour and response of individuals across various cities. The paper aims to understand how people change their day-to-day life in cities during the pandemic and while the restrictions getting released post the first wave. The paper also understands how the pandemic impacted urban spaces and what value they hold for people. By interviewing individuals from different cities, the data were transcribed and analysed to understand this behavioural change and the attitude of people. The outcome of the research was derived as a concept map through the codes generated during the research.

Registration of the flow pattern fine structure and the matter distribution of a free falling liquid drop in a target fluid at rest in the impact mode of coalescence, when the kinetic energy of the drop exceeds its available potential surface energy (APSE), was carried out by photo and video recording. The main attention was paid to the study of the flow structure at the initial stage of the cavity formation. To carry out color registration, the flow pattern was illuminated by several matrix LED and fiber optic sources of constant light. The planning of experiments and interpretation of the results were based on the properties of the complete solutions of the fundamental equations of fluid mechanics system, including the transfer and conversion of energy processes. Complete solutions of the system of equations describe large-scale flow components that are waves or vortices as well as thin jets (ligaments, filaments, fibers, trickles). In experiments, the jets are accelerated by the converted available potential surface energy (APSE) when the free surfaces of merging fluids were eliminated. The experiments were performed with the coalescence of water, solutions of alizarin ink, potassium permanganate, copper sulphate or iron sulphate drops in deep water. In all cases, at the initial contact, the drop begins to lose its continuity and breaks up into a thin veil and jets, the velocity of which exceeds the drop contact velocity. Small droplets, the size of which grows with time, are thrown into the air from spikes at the jet tops. On the surface of the liquid, the fine jets leave colored traces that form linear and reticular structures. Part of the jets penetrating through the bottom and wall of the cavity forms an intermediate covering layer. The forming layer jets are separated by interfaces of the target fluid. The processes of molecular diffusion equalize the density differences and form an intermediate layer with sharp boundaries in the target fluid. All noted structural features of the flow are also visualized when a fresh water drop isothermally spreads in the same tap water. The fast-changing and finely structured diffuse boundary of merging fluids, which at the initial stage has a complex and irregular shape, is gradually smoothed out by molecular diffusion processes. The similar flow patterns were observed in all performed experiments, however the geometric features of the flow depend on the individual thermodynamic and kinetic parameters of the contacting fluids.

The results of studying the effect of particles of few-layer graphene (FLG) synthesized by self-propagating high-temperature synthesis (SHS) on the complex of strength and thermo physical properties of polymer composite products obtained by DLP 3D printing are presented. It has been discovered to achieve an increase in thermo physical and strength parameters of polymers modified by FLG compared with samples made on the unmodified base resin. This result was achieved due to low defectiveness, namely the absence of Stone-Wales defects in the structure of FLG due to the homogeneous distribution of FLG over the volume of the polymer in the form of highly dispersed aggregates. It was possible to increase hardness by 120 %, bending strength by 102 %, Charpy impact strength by 205 %, and thermal conductivity at 25 °C by 572 % at concentrations of few-layer graphene of no more than 2 wt. %.

In response to the problem of increasing climate change and energy security, investment in renewable energy sources has increased significantly both in Europe and globally. Wind and solar power plants are expected to be the largest contributors to global decarbonization, ranking first and second in projected capacity by 2050. Since all power plants have some impact on the environment, this also applies to photovoltaic power plants. Because of the large capacities projected for PV installed capacity, their environmental impacts should be evaluated. The environmental impacts of PV power plants change over time. Improving the manufacturing technology of PV system components, increasing the efficiency of solar cells, and using materials that are less harmful to the environment will reduce these impacts. Manufacturing PV system components is a highly energy-intensive process that involves greenhouse gas emissions. As new renewable energy capacity is built, the amount of "green" electricity on the grid increases, reducing CO2 emissions per kWh consumed. The objective of this paper is to analyze the current status of the environmental impact of PV power plants under these changing conditions in terms of CO2 emissions, land use, pollutant and noise emissions, and water consumption. The capacity installed to date will reach the end of its lifetime by 2050, which means that the amount of waste associated with it will increase over time. This can have a significant impact on the environment, which is why part of the work is dedicated to this problem. In addition to the available information from the literature, in the part related to land use, the authors also made their own estimates based on data on newly installed PV power plants and PV modules available on the market. The results of the analysis show that there is enough land both in Europe and worldwide to install the planned capacities of rooftop and ground-mounted PV power plants. CO2 emissions are at the same level as for concentrated solar power, with a decreasing trend. Pollutant emissions, noise and water consumption are not a major problem compared to other types of power plants. Overall, it can be concluded that the expansion of PV capacity has a very positive impact on the environment.

This paper summarizes opinions on the economic impacts of horticulture research and extension at MSU Coastal Research and Extension Center. More than 8,400 horticulture producers, master gardeners, research and extension staff, and non-profit organizations participated in horticulture events during the last five years. Qualitative assessments of horticulture research and extension performed by the faculty and staff were solicited during voluntary surveys.

This paper revisits a classic problem in physics - Hertz elastic dynamics of two colliding elastic spheres. This study obtains impact period in terms of hypergeometric function and successfully combines Deresiewicz's three segmental solutions into one single solution. Our numerical investigation confirms that Deresiewicz's inversion is a good approximation. As an essential part of this study, a general Maple code is provided.

Introduction: Pharmaceutical products are inevitable for human health. Owing to the growing need for pharmaceuticals, pharmaceutical companies introduce drugs annually into the market in addition to the extensive collection of existing pharmaceutical products. Households, farms, health facilities, and pharmaceutical industries release pharmaceutical waste into the environment at low concentrations through routine pharmaceutical use, damage, and expiry. The effects of active pharmaceutical ingredients (API) on non-target species in the environment are not known. Over the years, pharmaceuticals such as diclofenac and ibuprofen in trace amounts have been detected in public water systems, ground and surface water. Unwanted medicines should be safely disposed of at a reduced financial cost to mitigate the public and environmental health risks. Lack of general knowledge of how to dispose of unused pharmaceuticals leads to improper disposal resulting in accidental toxicity, rising healthcare costs, landfills pilfering/scavenging, water supply pollution, anti-microbial resistance, and death. To mitigate such effects, pharmacists should raise public awareness about safe disposal practices. Objective: This review aims to examine the sources of pharmaceutical waste, disposal costs, secure disposal methods, the effects of inappropriate disposal, and the role of pharmacists in the disposal. Method: The information on the stated objectives was gathered from available sources through a comprehensive literature review. Conclusion: Many countries contain tons of pharmaceutical waste that are expensive to destroy. Because of improper disposal, pharmaceutical waste has been found at trace amounts in drinking and surface water. A practical, environmentally sustainable approach to pharmaceutical waste management, with policies and guidelines, and public awareness campaigns, are necessary to address the problem of safe waste disposal. The national drug regulatory bodies should conduct environmental risk assessment resulting from the disposal of unwanted pharmaceuticals. Pharmacists should facilitate extensive training on sustainable drug use and proper pharmaceutical waste disposal at all levels to reduce the risks associated with improper disposal. Reduction of pharmaceutical waste generation at each step of a drug’s lifecycle, implementing takeback options, collection at approved sites, and modern technology to treat wastewater are highly recommended to reduce the effects of unwanted pharmaceuticals on human health and the environment.

Although child-centred care is increasingly referred to within the nursing literature, a clear definition of child-centred care and clarity around the concept is yet to be achieved. The objectives of this review were to examine: 1) What constitutes the concept of child-centred care in healthcare? 2) How has the concept of child-centred care developed? 3) What is the applicability of child-centred care and what are its limitations? and 4) How does the concept of child-centred care benefit and inform children’s healthcare? In total, 2984 papers were imported for screening, following removal of duplicates and screening, 21 papers were included in the scoping review.The findings suggest that child-centred care is an emerging, ambiguous, poorly defined concept; no clear consensus exists about what constitutes child-centred care. Although it seems antithetical to argue against child-centred care, little robust evidence was identified that demonstrates the impact of, and benefit from, child-centred care. If child-centred care is to be a sustainable, convincing model to guide practice and compete with other models of care it needs to establish robust evidence of its effectiveness, impact on children and their families as well as the wider impacts on the healthcare system.

In this research, we investigate the healthcare expenditure patterns in Uzbekistan, analyze their economic implications, and provide policy recommendations. The study focuses on the time frame from 2000 to 2019, employing quantitative data analysis, theoretical frameworks such as Wagner’s Law, and an economic geography perspective. Our objective is to gain insights into the relationship between economic development and healthcare spending, identify spatial disparities, and forecast future trends. The findings reveal fluctuations in per capita healthcare spending, emphasizing the necessity for sustainable financing mechanisms and preventive measures. Ultimately, our study underscores the significance of aligning healthcare expenditure decisions with economic objectives while prioritizing the well-being of the population.

The monitoring of river discharge is vital for the correct management of water resources. A worldwide facility used for measuring discharge are flat-V gauging weirs. These structures consist of a small weir, with a triangular cross-section and a flat “V”-shaped notch. Their extensive use is a consequence of their utility in the measurement of both low and high flow conditions. However, depending on their size, local morphology and river discharge can act as full or partial hydraulic barriers to fish migration. To give answer to this question, the present work studies fish passage performance over flat-V weirs considering their hydraulic performance. For this, radio-tracking and video monitoring observations were combined with computational fluid dynamics (CFD) models in two flat-V weirs, using Iberian barbel (Luciobarbus bocagei) as target species. Results show that fish passage is conditioned by both hydraulic and behavioral processes, providing evidences about the scenarios where flat-V weirs may act as full or partial barriers to upstream movements. For the studied flat-V weirs, a discharge range of 0.27-8 m3/s, with a water drop difference between upstream and downstream water levels lower than 0.7 m and a depth downstream the weir higher than 0.30 m can be considered as an effective passage situation for barbels. These findings are of interest to quantify flat-V weir impacts, for engineering applications and to establish managing or retrofitting actions when required.

The COVID-19 pandemic caused by SARS-CoV-2 poses a devastating threat to human society in terms of health, economy and lifestyle. Establishing accurate and real-time models to predict and assess the impact of the epidemic on the economy is instructive. We have designed a new model to quantitatively assess the impact of the COVID-19 on the economy of China’s mainland. The nominal GDP in the Q1 of 2020 that we predicted for China’s mainland with the Baidu Mi-gration Data is RMB 20,785.7 billion, which is less by 3.59% than that in 2019. The estimated val-ue is confirmed roughly by the official report released in April 17, 2020 (RMB 20,650 billion, 6.8% year-on-year declined). Strict control measures during the epidemic have greatly reduced Chi-na's economic activity and had a serious impact on the country's economy. Orderly promotion of population mobility plays a decisive role in economic recovery.

ackground: The swift assimilation of Artificial Intelligence (AI) across multiple industries is altering the worldwide economic terrain. Unprecedented opportunities and difficulties are brought about by this revolutionary technology, which has an impact on innovation, trade, labor markets, and security. Objective: The goal of this study is to thoroughly investigate the economic effects of AI by exploring how it may affect labor markets, innovation, trade internationally, and security. The goal is to offer insights that support strategic decision-making and policy formation by examining current trends, opportunities, and difficulties. Results: The research highlights the dual character of artificial intelligence's influence, highlighting both its potential to spur economic expansion and its drawbacks, including the loss of jobs, a lack of standards, and security issues. The study highlights how crucial cooperation is to overcoming these obstacles and realizing AI's full potential. Conclusion: The balancing opportunities and risks becomes critical as AI continues to change the economic landscape. The report promotes proactive steps including ethical AI design guidelines, ongoing worker retraining, and flexible regulatory strategies. As we shape an AI future that puts inclusion, creativity, and responsible governance first, collaboration emerges as a key theme.

The objectives of the research are to investigate the characteristics of the board of directors on the financial performance of the enterprise. Using a sample data from 52 construction and real estate enterprises listed on Vietnam stock exchange in the period 2006-2020. Using typical regression methods such as pooled OLS, FEM, REM and assessing the defects of the research model, the FGLS method is selected. At the same time, due to the existence of endogenous phenomena and the nature of interdependence among enterprises in Vietnam, research using the instrumental variables two-step generalized method of moments (IV-GMM) in order to correct for cross-sectional dependence, autocorrelation, endogeneity, and heteroskedasticity in the analysis. Research results suggest that board size, female board members, meeting frequency, and board members' education have a positive influence on financial performance. Moreover, the independence of the Board of Directors increases, the business efficiency decreases. The research also found a positive relationship of tangible fixed assets, and a negative relationship between capital structure choice, firm size and corporate financial performance.

Background and Research Highlights: Despite all the concerns and initiatives, natural resources like forests, as well as biodiversity are decreasing at an alarming rate worldwide. Conservation is considered as one of the major tools to prevent such loss and rapid degradation. Evidence around the world shows the adverse effects of conservation laws and policies on indigenous peoples and other local communities. Objectives: This study was conducted in one of the forest-dependent communities situated in Sundarban (world’s largest mangrove forest) to understand the impact of conservation laws and policies on their livelihood. Materials and Methods: A qualitative methodology was designed to collect data, using focus group discussions and case study with community people, and individual interviews with the personnel from NGOs and relevant government departments. Findings: Strict conservation policies and restrictions in accessing forest resources made lives and livelihoods of the local community insecure and unstable, thus putting the community in a vulnerable situation. The had to leave their traditional mode of income and look for alternative livelihood options. Almost no evidence was found in relation to upkeeping their rights in conservation activities. Prohibited movement, provision of punishment for entering into the forest without proper permission and struggles in everyday life were some of the highlighted issues. They had no participation in conservation activities, management of alternative livelihood options, and even they were not sensitized before putting restrictions. Although they had a history of emotional and physical attachment with the forest, existing activities did not consider these issues. In addition, corruption and abuse of power by law enforcement agencies towards the local community intensified the sufferings. Conclusion: This study argues that the realization of human rights in conservation activities and the sensitization of the implementing stakeholders are prerequisites for ensuring the sustainability of both biodiversity and the affected people.

Globalized in 1995 through the TRIPs Agreement, humanity’s dominant mechanism for encouraging innovations involves 20-year product patents, whose monopoly features enable innovators to reap large markups or licensing fees from early users. Exclusive reliance on this reward mechanism in the pharmaceutical sector is morally problematic for two main reasons. First, it imposes a great burden on poor people who cannot afford to buy patented treatments at monopoly prices and whose specific health problems are therefore neglected by pharmacological research. Second, it discourages pharmaceutical firms from fighting diseases at the population level with the aim of slashing their incidence. These problems can be much alleviated by establishing a supplementary alternative reward mechanism that would enable pharmaceutical innovators to exchange their monopoly privileges on a patented product for impact rewards based on the actual health gains achieved with this product. Such an international Health Impact Fund (HIF) would create powerful new incentives to develop remedies against diseases concentrated among the poor, rapidly to provide such remedies with ample care at very low prices, and to deploy them strategically to contain, suppress, and ideally to eradicate the target disease. By promoting innovations and their diffusion together, the HIF would greatly enlarge the benefits, and thereby also the cost-effectiveness, of the pharmaceutical sector, in favor of the world’s poor especially.

In our study we used the data set on morphimetric traits in beetles species. It has been constantly replenishing for 20 years by the samples, received from different regions of Russia and abroad. In this case we have selected data on nine species for which the left and right sides had been measured and fluctuating asymmetry (FA) could be estimated. The samples were from 6 provinces of Russia and Belarus, which ranged in 3 degrees in latitude and 57 degrees in longitude and included more than 150 plots in different types of biotopes. FA was assessed according to the standard method in 5265 specimen in one dimensional trait and one - meristic. ANOVA showed that biotope, species and their interaction affected FA in both traits, that is different species reacted differently to biotope type. In uncommon biotopes (according to accepted in carabidology classification) FA was increased. In forest species the negative relationship between FA in dimensional and meristic traits in the range in biotopes was revealed. In those species only FA values were higher in males than in females. In generalist species FA varieв similarly in both sexes and in both traits being the highest in open biotopes. In eudomonant of arable lands biotopes – Poecilus cupreus – the highest values of FA were recorded in the meadows, being about equal in all types of crops.

The combination of increased pressures for high-volume, high-impact publications in English language with the high rejection rates of submitted manuscripts for publications presents an often unsurpassable obstacle for (early career) researchers. At the same, the register requirements of peer-reviewed journals -that can contribute to whether a paper is accepted for publication- has received little attention. This paper redresses this gap, by investigating the linguistic choices in 60 published manuscripts in four journals, with impact factor (IF) above 2; all 4 journals, publish original research papers in the field of chemical engineering science and specifically focus on wastewater treatment. Our survey shows that chemical engineering research publications tend to comply to a set of unwritten requirements: multidisciplinarity, brevity, co-authorship, focus on the description of practical results (rather than methods), and awareness of non-specialised audiences. It is found that less discipline-specific vocabulary was used in higher IF journals and this is interpreted within the current context of manuscript publication and consumption. Also, a complex relationship between the advertised scope of each journal and the actual published papers exists, indicating that guide for authors and aims and objective published by the journal's editorial office should be critically evaluated.

In 2011, commercial aviation contributed approximately 3.5% of global anthropogenic climate change through the emission of greenhouse gases during flight and operational non-CO2 climate effects. Over the last few years, numerous aviation-related organisations have set goals to reduce aviation’s climate impact. These goals, however, lack alignment, are poorly or ambiguously defined, or are internally inconsistent. This increases uncertainty about what aviation should work towards, how various stakeholders can contribute, and introduces problems with respect to accountability. In order to address this issue, this paper presents a comprehensive definition of a climate neutral air transport system as an “air transport system of which the climate effects of all its greenhouse gases and non-carbon dioxide effects throughout the entire life-cycle of each element of the system is balanced”. The proposed definition spans relevant system and encompasses all life cycle phases. To achieve a climate neutral air transport system by 2050, all life-cycle greenhouse gas emissions and non-CO2 climate effects remaining after in-sector reduction should be neutralised, as should all remaining non-CO2 climate forcing from emissions prior to 2050. Clarity on governance is furthermore needed, as the goal and associated targets proposed should be adopted globally.

Nicaragua is preparing the construction of an interoceanic canal that will be the longest and largest canal on earth. An environmental and social impact assessment has been published in 2014 supporting a general viability of the canal. Nonetheless, several scientist and societal actors raised serious concerns regarding the social, economic and ecological sustainability. Despite an open dispute within the Nicaraguan society, no independent, transparent and scientifically sound assessment has been carried out. Only the environmental and social impact assessment, charged by the canal constructor, has so far been realized. The aim of this study is to contribute to an open scientific debate through an objective and independent quantification of land use and hydrological impacts. This article presents a transparently documented and comprehensible impact assessment investigation of the West Canal Segment of the Nicaragua Canal. Based on publically available data and scientifically sound and recognized methods land use, hydrological (water availability) and socio-economic impacts (streets, population) are described, quantified and compared with official declarations in the impact assessment. While some results support official declarations other do not. The number of affected population and the water use of the Brito Lock resulted much higher in this study, for instance. Hence, society and water availability could be affected much higher than estimated in the impact assessment.

The emission of sulphur dioxide (SO2) from mining activities presents a substantial risk to public health, especially in populations located near mine industrial regions. This study investigated the potential correlation between exposure to sulphur dioxide (SO2) and its effects on respiratory health in Kankoyo Township, Zambia. A variety of methodologies were employed in this study, encompassing community participation, expert interviews, spatial analysis, and a retrospective examination of health and SO2 data for Kankoyo spanning 15 years. The results of our research indicated a worrisome correlation between the community and the presence of SO2, which has had a significant impact on their lives. The expert interviews also emphasized the effects of SO2, with respiratory cases accounting for approximately 75% of the reported cases. Additionally, the clinic officer observed that asthma cases have decreased following the implementation of a monitoring station in the community. Furthermore, overall emissions of SO2 have decreased since the upgrade of the smelter operation. A probable association was identified in the retrospective analysis between exposure to SO2 and the occurrence of asthma, respiratory non-pneumonia, and pneumonia infections. The findings of the retrospective research revealed a substantial association between SO2 concentrations and the susceptibility of individuals aged 5 years and older to asthma, respiratory non-pneumonia, and pneumonia infections. The results of the spatial study indicated that Kankoyo exhibited a significant level of SO2 pollution, above the established limitations set by the Zambian Environmental Management Agency (ZEMA) by an alarming margin of 1713%. In response to the challenges identified, this study proposed several measures. These measures encompassed the implementation of a requirement for regulators such as ZEMA and local communities to have access to real-time pollution data from mines, to enhance transparency. Additionally, the deployment of affordable air quality sensors, the resolution of medication shortages, the establishment of specialized respiratory health clinics, the initiation of IT-driven public awareness campaigns, and the expansion of research to investigate additional pollutants and confounding factors were also recommended.

In Ghana, about 73% of households rely on solid fuels for cooking. Over 13,000 annual deaths are attributed to exposure to indoor air pollution from inefficient combustion. In this study, assessment of thermal efficiency, emissions and total global warming impact of three cookstoves commonly used in Ghana was completed using IWA water boiling test (WBT) protocol. Statistical averages of three replicate tests for each cookstove were computed. Thermal efficiency results were: wood-burning cookstove 12.2% (Tier 0), traditional charcoal cookstove 23.3% (Tier 1-2) and improved charcoal cookstove 30% (Tier 2-3). The wood-burning cookstove emitted more CO, CO2 and PM2.5 than charcoal cookstove (coalpot) and improved cookstove. Emission factor for PM2.5 and emission rate for the wood-burning cookstove (Tier 0) were over four times higher than the traditional charcoal cookstove (Tier 3) and improved cookstove (Tier 2). On the basis of WBT, annual global warming impact potential for emissions are estimated at 4 tonnes of CO2e for the wood-burning cookstove, 1.5 tonnes of CO2e for charcoal cookstove (coalpot) and 1 tonne of CO2e for improved cookstove. We conclude that there is the need for awareness, policy and incentives to enable end-users switch to improved cookstoves for increased efficiency, reduced emissions/global warming impact.

Mass mortality events and anthropogenic impacts were increasingly documented affecting Paramuricea clavata (Risso, 1826) during the last decades. These impacts enhance the settling of epibiontic organisms on the injured colonies. The epibiosis was studied by photographic sampling carried out on the granitic outcrops of the Tavolara Channel within the Tavolara-Punta Coda Cavallo Marine Protected Area (NE Sardinia) between 2017-2023 at 35-55 m. The number of colonies and percent surface involved in epibiosis, the specific richness of the epibiontic community and the temporal evolution of the phenomenon were investigated. Almost all the investigated gorgonians (93%) showed parts involved in epibiosis, with a high percentage of covering (one-third of the surface). Out of the 37 epibiontic species recorded, the most recurrent described an ecological succession dominated by hydrozoans, sponges, bryozoans, serpulids and the parasitic soft coral Alcyomiun coralloides. Nevertheless, single colonies studied through time revealed the unpredictability of the colonization process. The peculiar habitat of a high naturalistic value of the granitic outcrops hosting the P. clavata forests demonstrates a widespread suffering condition, supported both by environmental and anthropogenic sources of stress. Such considerations make it necessary to review the current zonation of the area, where the actual vulnerability and usability evaluations are based on obsolete information.

Covid-19 has had a significant impact on the lives of populations across the world. Since the first reported case of the coronavirus in Wuhan, China, the world faced a situation of dealing with a novel virus. While the physical health effects of the coronavirus was the center of focus for much of the pandemic, Covid-19 was accompanied with significant social and psychological consequences on the world populations. In this review, we aim to assess how the coronavirus pandemic has affected the African continent at large, highlighting the socio-psychological consequences. Through citing some examples of a few countries in Sub-Saharan Africa, the review will detail the experiences of the populations within this region which remain plagued with economic and health vulnerabilities that were further exposed by the pandemic.

Introduction In 2016 the European Union setup its first structured food provision program to combat food insecurity. We aimed to measure the program’s capacity in assisting its beneficiaries to achieve a healthy diet and measure their satisfaction. Methods A computational study was carried out to calculate daily food provision per person under the program for January 2016-December 2017. A cross sectional survey in 3942 beneficiaries took place in December 2017-June 2018 collecting anthropometric, sociodemographic and program satisfaction data. Descriptive statistics were performed and reported as relatively frequencies, mean ± standard deviation. Results Dairy, fresh meat, legumes, sugar, olive oil and tomato concentrate were the most commonly procured items. The program’s contribution to vegetable, dairy and cereal intake was the lowest (3.4%, 6.1%, 6.0% respectively) as opposed to free sugars (12.2%) and oils (24.5%). The program’s algorithm favors greatly (almost 3-fold) single person applications compared to 4+ persons applications. The monetary value was estimated at 21.23±23.4 euros/food provision, however 64.4% of beneficiaries reported a high positive impact on the household budget. 50.7% and 41.6% reported high positive impact on feelings of anxiety and security, respectively. ~70% of the beneficiaries were highly satisfied with the foods provided, with lower scores for quality and shelf-life (50.7% and 58.8% high respectively). Conclusions The program is met by high beneficiary satisfaction and is perceived as a substantial assistance. Increases in the amounts and variety of foods delivered, with a focus on fruit, vegetables and fish should be considered, to further improve the program’s dietary impact.

Economic risks for livestock production are caused by volatile commodities and market conditions, but also by environmental drivers like increasing uncertainties due to weather anomalies and global warming. These risks impact the gross margin of farmers and can stimulated investment decisions. For confined pig and poultry production, farmers can reduce the environmental impact by implementing specific adaptation measures to reduce heat stress. A simulation model driven by meteorological data was used to calculate heat stress impact as a projection for 2030. For a business-as-usual livestock building, the indoor climate for several adaptation measures was calculated. The weather-related value-at risk quantified the economic risks caused by global warming and the stochastic component of the weather. The results show that only energy-saving adaptation measures to reduce the inlet air temperature are appropriate to reduce the economic risk to the level of the year 1980. The efficiency of other adaptation measures to reduce heat stress is distinctly lower. The results in this study can support the decision making of farmers concerning adaptation management and investments. It can inform agricultural policy design as well as technological development.

Background: Long COVID, characterized by a persistent symptom spectrum following SARS-CoV-2 infection, poses significant health, social, and economic challenges. This review aims to consolidate knowledge on its epidemiology, clinical features, and underlying mechanisms to guide global responses; Methods: We conducted a systematic literature review, analyzing peer-reviewed articles and reports to gather comprehensive data on long COVID’s epidemiology, symptomatology, and management approaches; Results: Our analysis revealed a wide array of long COVID symptoms and risk factors, with notable demographic variability. The current understanding of its pathophysiology suggests a multifactorial origin yet remains partially understood. Emerging diagnostic criteria and potential therapeutic strategies were identified, highlighting advancements in long COVID management.; Conclusion: This review highlights the multifaceted nature of long COVID, revealing a broad spectrum of symptoms, diverse risk factors, and the complex interplay of physiological mechanisms underpinning the condition. Long COVID symptoms and disorders will continue to weigh on healthcare systems in years to come. Ad-dressing long COVID requires a holistic management strategy that integrates clinical care, social support, and policy initiatives. The findings underscore the need for increased international cooperation in research and health planning to address the complex challenges of long COVID. There is a call for continued refinement of diagnostic and treatment modalities, emphasizing a multidisciplinary approach to manage the ongoing and evolving impacts of the condition.

This paper focused on impact localization of composite structures, which possess more complexity in the guided wave propagation because of the anisotropic behavior of composite materials. In this work, a composite plate was manufactured by using a compression molding process with proper pressure and temperature cycle. Eight layers of woven composite prepreg were used to manufacture the composite plate. A structural health monitoring (SHM) technique is implemented with piezoelectric wafer active sensors (PWAS) to detect and localize the impact on the plate. There are two types of impact event are considered in this paper (a) low energy impact event (b) high energy impact event. Two clusters of sensors recorded the guided acoustic waves generated from the impact. The acoustic signals are then analyzed using a wavelet transform based time-frequency analysis. The proposed SHM technique successfully detect and localize the impact event on the plate. The experimentally measured impact locations are compared with the actual impact locations. An immersion ultrasonic scanning method was used to visualize the composite plate before and after the impact event. A high frequency 10 MHz 1-inch focused transducer was used to scan the plate in the immersion tank. Scanning results show that there is no visible manufacturing damage in the composite plate. However, clear impact damage was observed after the high-energy impact event.