The effects of partial replacement of Si by Al on the microstructure, tensile properties, and Charpy impact toughness were investigated using 0.2%C-Si/Al-Mn-Cr-B TRIP-aided martensitic steels. The impact toughness was related to the microstructural and mechanical properties. The partial re-placement decreased the volume fraction of retained austenite and increased the mechanical stabil-ity, accompanied by softening and an increase in the volume fraction of the primary martensite. Resultantly, the partial replacement decreased strength and ductility. The impact absorbed energy (value) at 25 C was slightly increased by the partial replacement. The increased impact absorbed energy was mainly caused by high crack/void propagation energy due to the softened primary martensite and a small contribution of the stabilized retained austenite. The 50% shear fracture ductile-to-brittle transition temperature was marginally raised by the partial replacement. The raised transition temperature was mainly associated with an increase in a unit crack path of qua-si-cleavage/cleavage fracture.

: The effect that the microstructure exerts on the TRIP phenomenon and on the mechanical properties in a multiphase steel was studied. Samples of an initially cold-rolled ferrite-pearlite steel underwent different intercritical annealing treatments at 750 °C until an equal fractions of austenite/ferrite was reached; the intercritical treatment was followed by isothermal bainitic treatments before cooling the samples to room temperature. Samples in the first treatment were heated directly to the intercritical temperature, whereas other samples were heated to either 900 or 1100 °C to obtain a fully homogenized, single phase austenitic microstructure prior to the conducting the intercritical treatment. The high temperature homogenization of austenite resulted in the decrease in its stability, so a considerable austenite fraction transformed into martensite by cooling to room temperature after the bainitic heat treatment. Most of the retained austenite transformed during the tensile tests, and as a consequence, the previously homogenized steels showed the highest UTS. In turn, the steel with a ferritic-pearlitic initial microstructure, exhibited higher ductility than the other steels and texture components that favor forming processes.

The formability and failure behavior of TRIP steel blanks were investigated through various stress states. The forming limit diagram (FLD) at fracture is constructed both experimentally and numerically. Numerical studies are performed to evaluate the applicability of different damage criteria in predicting the FLD as well as complex cross-die deep drawing process. The fracture surface and numerical results revealed that the material failed in a different mode for different strain path. Therefore, Tresca model which is based on shear stress accurately predicted the conditions where shear had the profound effect on the damage initiation, whereas Situ localized necking criterion was able to calculate the conditions which localization was dominant.

This paper presents additional results of the generalized bathtub model for urban networks, including a simpler derivation and exact solutions for uniformly distributed trip lengths. It is shown that in steady state this trip-based model is equivalent to the more parsimonious accumulation-based model, and that the trip-length distribution has merely a transient effect on traffic dynamics, which converge to the same point in the macroscopic fundamental diagram (MFD). To understand the statistical properties of the system, a queueing approximation method is proposed to compute the network accumulation variance. It is found that (i) the accumulation variance is much larger than predicted by traditional queueing models, due to the nonlinear dynamics imposed by the MFD, (ii) the trip-length distribution has no effect on the accumulation variance, indicating that the proposed formula for the variance might be universal, (iii) the system exhibits critical behavior near the capacity state where the variance diverges to infinity. This indicates that the tools from critical phenomena and phase transitions might be useful to understand congestion in cities.

With considerable growth in the Information & Communication Technologies, several smartphone-based mobility platforms have already sprung up and they have the potential of transforming the mobility ecosystem completely. However, mobility-based smartphone app usage pattern across various user groups in Indian cities is unknown, and this knowledge is vital for introducing new consolidated apps-based services. Therefore, using primary data from a survey carried out in Bhopal (India), this article analyses the usage pattern of smartphone apps for trip planning activities and travel outcomes across various user groups at the personal and household level. The research offers empirical indication of relationships between smartphone app usage for trip planning (like departure time, choosing a destination, choosing the mode, se-lecting route, communicating, and coordinating trips, and performing tasks online instead of visiting) and resulting travel outcomes including vehicle kilometers travelled (for purposes like work/education, shopping, and recreation), social gathering, new place visits and group trips. The chi-square test has been used to test and interpret several socioeconomic variables that could in-fluence this relationship, such as gender, age, income, etc. This study's findings provide important behavioral insights that may be useful in policy discussions.

With increasing availability of alternative mobility options for city transportation system, it is necessary to better understand how emerging mobility are impacting the travel demand and consumer-social surplus. However, few study has been conducted to evaluate the social welfare effects of the range of vacant trip in mobility oriented development(MOD) mode. This paper identified the vacant trip and loading rate evaluation model under mobility oriented development mode. recommended solutions to enhance the effective operation of the different mobility services under numerical illustrations, which can offer some beneficial guidance and theoretic basis to the efficiency of MOD in planning and management aspects.

With increasing availability of alternative mobility options for city transportation system, it is necessary to better understand how emerging mobility are impacting the travel demand and consumer-social surplus. However, few study has been conducted to evaluate the social welfare effects of the range of vacant trip in mobility oriented development(MOD) mode. This paper identified the vacant trip and loading rate evaluation model under mobility oriented development mode. recommended solutions to enhance the effective operation of the different mobility services under numerical illustrations, which can offer some beneficial guidance and theoretic basis to the efficiency of MOD in planning and management aspects.

In recent years, local governments have been using transportation card data to monitor the use of public transport and improve the service. However, local governments that are applying a single-fare scheme are experiencing difficulties in using data for accurate identification of real travel patterns, policy decision support, etc. because the information on alighting stops of users is missing. This policy limits its functionality of utilizing data such as accurate identification of real travel patterns, policy decision support, etc. Various studies to overcome this limitation have been conducted in South Korea and other countries to develop es-timation methodologies of alighting stops. Even existing studies introduce an advanced method, we found the margin for better accuracy by combining various estimation methodologies for estimating alighting stops. This study reviewed previously conducted studies to classify data with missing alighting stop information into trip types and then applied an appropriate alighting stop estimation methodology for the characteristics of each trip type by stage. The proposed method is evaluated by utilizing transportation card data of the Seoul metropolitan area and checked the accuracy for each standard of allowable error for sensitivity analysis. Furthermore, the number of trips, accuracy, and valid tag rate were checked for each type to examine the need for classifying the trip types. Finally, our evaluation also examines the impact of classifying trip types on estimation accuracy. The evaluation criteria are accuracy of the number of trips and valid tag rate. The analysis shows that the stage-by-stage estimation methodology based on the trip type proposed in this study can es-timate users’ destinations more accurately than previous studies. Furthermore, based on the construction of nearly 100% valid tag data, this study differs from prior studies.

This study investigates the factors influencing the choice of online and offline shopping trips and their impacts on urban transportation, environment, and economy in Tehran, Iran. A questionnaire survey was conducted to collect data from 1,000 active e-commerce users who made successful orders in both online and offline services in the last 20 days of 2021 in areas 2 and 5 of Tehran. A deep neural network model was developed to estimate the type of shopping trip based on 10 indicators, such as age, gender, car ownership, delivery cost, product price, etc. The performance of the model was compared with three other algorithms: MLP, decision tree, and KNN. The results showed that the deep neural network model had the highest accuracy of 95.63%. The most important factors affecting the choice of shopping trips were delivery cost, delivery time, and product price. This study provides insights for transportation planners, e-commerce managers, and policymakers to design effective strategies for reducing transportation costs, pollutant emissions, urban traffic, and increasing user satisfaction and sustainable development.

Carsharing has become increasingly popular in recent years as a sustainable transportation solution, offering individuals access to shared vehicles on a short-term basis. One-way carsharing, in particular, presents unique challenges due to its flexible nature, allowing users to pick up and drop off vehicles at different locations within a designated service area. This flexibility increases the service ridership but comes at the expense of vehicle imbalance among the stations, as some stations may have excess vehicles while other stations have vehicle shortages. Therefore, carsharing companies need to decide on strategies to ensure a balanced distribution of vehicles among the stations. This is essential as unbalanced vehicle distribution can lead to the unavailability of vehicles when needed or, conversely, result in an increased number of unnecessary rebalancing trips, thereby exacerbating traffic congestion and environmental pollution. Such issues can potentially undermine the overall contribution of carsharing to urban sustainability. To this end, this paper reviews the vehicle imbalance problem that arises in this field and the solution algorithms that solve them.

Online and offline shopping trip have different impacts on various aspects of urban life, such as e-commerce, transportation systems, and sustainability. Therefore, it is important to evaluate the factors that influence their choices. We use a hybrid machine learning model that combines a gray wolf optimization algorithm and a deep convolutional neural network to estimate shopping trip based on a survey of 1,000 active e-commerce users who made successful orders in both online and offline services in the last 20 days of 2021 in areas 2 and 5 of Tehran. The gray wolf optimization algorithm performs feature selection and hyperparameter tuning for the deep convolutional neural network, which is a powerful deep learning model for image recognition and classification. The results show that our model achieves an accuracy of 97.81% with an MSE of 0.325 by selecting seven out of ten features. The most important features are delivery cost, delivery time, product price, car ownership. In addition, comparing the performance of the proposed method with other methods showed that the proposed algorithm with an accuracy of 97.81%, the accuracies of the single deep learning model, MLP neural network, decision tree, and KNN models were 95.63%, 90.0%, 86.49%, and 80.16%, respectively.

Predicting trip purpose from comprehensive and continuous smart card data is beneficial for transport and city planners in investigating travel behaviours and urban mobility. Here we propose a framework, ActivityNET, using machine learning (ML) algorithms to predict passengers’ trip purpose from smart card data and Points-of-Interest (POIs) data. The feasibility of the framework is demonstrated in two phases. Phase I focuses on extracting activities from individuals’ daily travel patterns from smart card data and combining them with POIs using the proposed ‘activity-POIs consolidation algorithm’. Phase II feeds the extracted features into an artificial neural network (ANN) with multiple scenarios and predicts trip purpose under primary activities (home and work) and secondary activities (entertainment, eating, shopping, child drop-offs/pick-ups and part-time work) with high accuracy. As a case study, the proposed ActivityNET framework is applied in Greater London and illustrates a robust competence to predict trip purpose. The promising outcomes demonstrate that the cost-effective framework offers high predictive accuracy and valuable insights into transport planning.

This study aims to test a model linking destination image, perceived value, tourist satisfaction, and tourist loyalty. Based on a sample of 300 tourists travelling by car from the World Natural Heritage Site of Tianchi, China, a new model of destination image was explored and data were analysed using partial least squares structural equation modelling (PLS-SEM). The results show that perceived value and satisfaction are direct antecedents of destination loyalty. Above all, perceived value and tourist satisfaction mediate the relationship between destination image and loyalty. Finally, this study discusses the theoretical and management implications of the findings in order to boost the tourism industry in the context of car trips.

Attempts to use computers to aid in the detection of breast malignancies date back more than 20 years. Despite significant interest and investment, this has historically led to minimal or no significant improvement in performance and outcomes with traditional computer aided detection. However, recent advances in artificial intelligence and machine learning are now starting to deliver on the promise of improved performance. There are at present more than 20 FDA approved AI applications for breast imaging, but adoption and utilization are widely variable and overall low. Breast imaging is unique and has aspects that create both opportunities and challenges for AI development and implementation. Breast cancer screening programs worldwide rely on screening mammography to reduce the morbidity and mortality of breast cancer and many of the most exciting research and available AI applications focus on cancer detection for mammography. There are however multiple additional potential applications for AI in breast imaging including decision support, risk assessment, breast density quantitation, workflow and triage, quality evaluation, response to neoadjuvant chemotherapy assessment, and image enhancement. In this review the current status, availability, and future directions of investigation of these applications are discussed, as well as the opportunities and barriers to more widespread utilization.

We consider a random dynamical system arising in a model of associative memory. This system can be seen as a small (stochastic and deterministic) perturbation of a determinstic system having two weak attractors which are destroyed after the perturbation. We show, with a computer aided proof, that the system has a kind of chaotic itineracy. Typical orbits are globally chaotic, while they spend relatively long time visiting attractor's ruins.

Public transport systems are considered to be a crucial aspect of a sustainable urban development, as they allow more passengers to efficiently travel across an urban area at low environmental and economic costs. Multiple factors can influence the public transport level of service. All take roots in the network structure and the operating regime, i.e. how bus lines are arranged atop the street network and how the service frequency is adjusted to meet urban mobility patterns. This is known as the bus network design problem and has been the subject of several studies. The problem is so challenging that most studies until now resort to strong assumptions such as a static description of the peak hour demand, homogeneous user behavior, and equal trip lengths. Potential effects of different types of user behavior and trip lengths patterns on the user and/or operator cost function have not been investigated whatsoever. Moreover, the existing studies have not considered the effects of the bus network structure on private car users, the level of interactions between the two modes, and the passenger mode choice that depends on the traffic conditions. This paper aims to close this gap and provide a general framework considering multiple trip length patterns, two types of user behavior, and the effects that the bus network structure might have on the traffic performance and passenger mode choice. For modeling different trip length patterns, the proposed approach combines all origin-destination pairs with the same trip length and uses the trip length distribution as an intermediate level of abstraction. As such, it allows to solve the optimal bus network design problem in an analytical way, while considering a more realistic setting including network congestion, mixed traffic, and different mode choice decisions depending on trip lengths and walking preferences. Numerical analysis reveals that both, the user behavior and the trip length patterns, have significant effects on the operator and user cost function. Results show that the probability of choosing any given mode is not constant across the user trip lengths, but follows certain distribution. This distribution is not unique, but varies across the trip length patterns, indicating the importance of modeling the mode choice at the trip length level. Finally, the analysis demonstrates the significance of addressing simplifications made in previous studies.

There have been several cases of large-scale wind generators (WGs) tripping off caused by untimely fault removing in recent years. Currently, the discoordination between the box-type transformer fuse protection (BTFP) and two-section collecting line current protection (CLCP) brings a security risk to wind farm. In order to ensure the selectivity, the first section (Sec-I) CLCP should be set a enough interval that is longer than the fuse melting time, and another interval is set for the Sec-II CLCP, which weakens the speed of the CLCP. When a fault occurs on the collecting line, there is no doubt that WGs cannot work too long in abnormal operation, which may cause WGs to be placed off the grid. For a power system with high penetration of wind power, large-scale WGs tripping off will cause a great power shortage, and affect the stability of the power system. The selectivity and sensitivity of the CLCP is analyzed in detail to make the CLCP speed better. Considering the fault ride-through ability of WGs, the fault clear time is an important factor to lead to large-scale WGs tripping off. Two main works are done in this paper. The first is to accelerate the speed of the Sec-I CLCP though reducing the protection zone. Another one is introduce the risk assessment module into the CLCP, which not only improve the speed of the CLCP but also ensure the safety of the wind farm during faults. According to the deference in trip-off causes of WGs, the matching functions are created to assess the trip-off risk of WGs on the spot. In the case of fault, the trip-off risk indicators of WGs are timely updated to data sharing center and open to the CLCPs. The set of risk indicators is divided into several subsets according to the risk range. The dynamic changes of the subsets during fault help to improved CLCP scheme. This scheme can accelerate protection speed based on the increasing risk of large-scale WGs tripping off in wind farms. Compared with traditional CLCP, this approach can make the CLCP combines selectivity and speed better based on the analysis of the ride- through ability of WGs.

We evaluate performance of Isogeometric analysis (IGA) for structural deformation and automobile crash. In automobile crash analysis, ensuring the accuracy of the acceleration, velocity and load in time series as well as the deformation behavior is important. To maintain the aforementioned consistency, accurately reproducing the bending and buckling of structural members is indispensable. In this study, we firstly compute the bending and buckling of structural members using IGA and validate its performance by comparing the results with conventional finite element analysis and experiments. In addition, we utilize IGA for the crash analysis of an automobile body.

Lung cancer, globally recognized as the leading cause of cancer-related mortality, presents a pressing need for innovative treatment strategies. Increasing evidence points towards the potential of monoamine oxidase (MAO) inhibitors in modulating cancer progression, primarily due to their role in regulating cellular metabolism and apoptotic pathways. This extraordinary study delves into the multifaceted therapeutic implications of MAO inhibitors in lung cancer management, elucidating their ability to pave the way for clinical advancement via novel targets and pathways. Capitalizing on recent advances in molecular biology, this research explores the molecular mechanisms underlying the anticancer actions of MAO inhibitors. By examining their impact on cell proliferation, migration, invasion, and apoptosis in lung cancer cell lines, we provide insight into the intricate signaling pathways and biochemical processes modulated by these compounds. The study also investigates the synergistic effects of MAO inhibitors in combination with established chemotherapeutic agents, elucidating their potential to enhance treatment efficacy and reduce cytotoxicity. Furthermore, we delve into the implications of MAO inhibitors on the tumor microenvironment, evaluating their influence on angiogenesis, immune regulation, and the epithelial-mesenchymal transition. This comprehensive analysis enables the identification of novel molecular targets, which hold promise for the development of advanced therapeutics tailored for specific lung cancer subtypes. To substantiate our findings, in this review, we thoroughly analyze the existing literature using state-of-the-art bioinformatics tools." in vivo orthotopic lung cancer models, and clinical patient cohorts. This robust and multidisciplinary approach permits the generation of clinical evidence supporting the integration of MAO inhibitors in lung cancer management. Conclusion: This ground-breaking study establishes the therapeutic potential of monoamine oxidase inhibitors in lung cancer management by unearthing novel pathways and targets for clinical advancement. The outcomes open doors for the development of innovative treatment strategies and inspire continued research efforts to combat the global burden of lung cancer.

To enhance system reliability and mitigate vulnerabilities of the Global Navigation Satellite Systems (GNSS), it is common to fuse the Inertial Measurement Unit (IMU) and visual sensors with the GNSS receiver in the navigation system design, effectively enabling compensations with absolute position and reducing data gaps. To address shortcomings of traditional Kalman Filter (KF) such as sensor error, imperfect nonlinear system model, and KF estimation error, a GRU-aided ESKF architecture is proposed to enhance positioning performance. This study conducts Failure Mode and Effect Analysis (FMEA) to priories and identify the potential faults in the urban environment facilitating the design of improved fault-tolerant system architecture. The identified primary fault events are data association error and navigation environment error during fault conditions of feature mismatch, especially in the presence of multiple failure modes. A hybrid federated navigation system architecture is employed using a Gated Recurrent Unit (GRU) to predict state increments for updating the state vector in the Error Estate Kalman Filter (ESKF) measurement step. The proposed algorithm’s performance is evaluated in a simulation environment in MATLAB under multiple visually degraded conditions. Comparative results provide evidence that the GRU-aided ESKF outperforms standard ESKF and state-of-the-art solutions like VINS-Mono, End-to-End VIO, and Self-Supervised VIO, exhibiting higher efficiency in complex environments.

Early detection of breast cancer, one of the most common cancers in women worldwide, raises survival rates and lowers the cost of treatment. Although breast cancer detection and classification (CAD) tools have improved, some issues and restrictions still require further research. The creation of breast cancer CAD systems, particularly with deep learning models, was significantly impacted by recent advancements in machine learning and image processing techniques. The current deep learning-based CAD system to identify and categorize masses in mammography is presented in a structured manner in this survey. The survey provides the most popular breast cancer CAD system evaluation metrics, publicly available mammographic datasets, and current image modalities. The survey examines the available literature, emphasizing its strengths and limitations. The survey also emphasizes the difficulties and drawbacks of the current methods for classifying and detecting breast cancer. We point out research gaps and make suggestions for further study. This systematic review may be beneficial for clinicians using CAD systems to diagnose breast cancer early on and for researchers looking for knowledge gaps and making more contributions to the field.

For W-band long-range mm-wave wireless transmission systems, nonlinearity issues resulting from photoelectric devices, optical fiber, and wireless power amplifiers can be handled by deep learning equalization algorithms. Besides, the PS technique is considered an effective measure to further increase the capacity of the modulation-constraint channel. However, since the proba-bilistic distribution of m-QAM varies with the amplitude, there have been difficulties in learning valuable information from the minority class. This limits the gain of nonlinear equalization. To overcome the imbalanced machine learning problem, we propose a novel two-lane DNN (TLD) equalizer with the random over-sampling (ROS) technique in this paper. The combination of PS at the transmitter and ROS at the receiver improves the overall performance of the W-band wireless transmission system, and our 4.6-km ROF delivery experiment verifies its effectiveness for the W-band mm-wave PS-16QAM system. Based on our proposed equalization scheme, we realize single-channel 10-Gbaud W-band PS-16QAM wireless transmission over 100 m optical fiber link and 4.6-km wireless air-free distance. The results show that compared with the typical TLD without ROS, the TLD-ROS can improve the receiver sensitivity by 1dB. Furthermore, a reduction of 45.6% in complexity is realized, and training samples can be reduced by 15.5%. Considering the actual wireless physical layer with its requirements, there is much to be gained from the joint use of deep learning and balanced data pre-processing techniques.

Image processing is a field of which its popularity increases and continues and, that grows dynamically with new technologies. Nowadays, image processing finds itself in use in almost every field. One of these uses is undoubtedly in the field of medicine, where diagnosis and treatment planning are made from images and, which is constantly changing with newly developed techniques. Of course, the most important factor in using this so widely in the medical field is the acquisition of images on every medical field. With the help of these images, the complaints can be seen more easily and the doctor can follow a path in the treatment of the disease. In our study, we used the Region Growing segmentation method to detect the intestinal mass. This study compares the area determined by the specialist with the area obtained with the segmentation process and, it is seen that the created software system can be used as an auxiliary system to specialist doctors.

With recent focus on deep neural network architectures for development of algorithms for computer-aided diagnosis (CAD), we provide a review of studies within the last 3 years (2015-2017) reported in selected top journals and conferences. 29 studies that met our inclusion criteria were reviewed to identify trends in this field and to inform future development. Studies have focused mostly on cancer-related diseases within internal medicine while diseases within gender-/age-focused fields like gynaecology/pediatrics have not received much focus. All reviewed studies employed image datasets, mostly sourced from publicly available databases (55.2%) and few based on data from human subjects (31%) and non-medical datasets (13.8%), while CNN architecture was employed in most (70%) of the studies. Confirmation of the effect of data manipulation on quality of output and adoption of multi-class rather than binary classification also require more focus. Future studies should leverage collaborations with medical experts to aid future with actual clinical testing with reporting based on some generally applicable index to enable comparison. Our next steps on plans for CAD development for osteoarthritis (OA), with plans to consider multi-class classification and comparison across deep learning approaches and unsupervised architectures were also highlighted.

Verifying the accuracy of a 3D-printed object involves using an image processing system. This system compares images of the CAD model of the object to be printed with its 3D-printed counterparts to identify any discrepancies. It is important to note that the integrity of the accuracy measurement is heavily dependent on the image processing settings chosen. This study focuses on this issue by developing a customized image processing system. The system generates binary images of a given CAD model and its 3D-printed counterparts and then compares them pixel-by-pixel to determine the accuracy. Users can experiment with various image processing settings, such as grayscale to binary image conversion threshold, noise reduction parameters, masking parameters, and pixel-fineness adjustment parameters, to see how they affect accuracy. The study concludes that the grayscale to binary image conversion threshold has the most significant impact on accuracy and that the optimal threshold varies depending on the color of the 3D-printed object. The system can also effectively eliminate noise (filament marks) during image processing, ensuring accurate measurements. Additionally, the system can measure the accuracy of highly complex porous structures where the pores size, depth, and distribution are random. The insights gained from this study can be used to develop intelligent systems for the metrology of additive manufacturing.

People are drawn to woodcut-style designs due to their striking visual impact and strong contrast. However, traditional woodcut prints and previous computer-aided methods have not addressed the issues of dwindling design inspiration, lengthy production times, and complex adjustment procedures. We propose a novel network framework, the Woodcut-style Design Assistant Network (WDANet), to tackle these challenges. Notably, our research is the first to utilize diffusion models to streamline the woodcut-style design process. We've curated the Woodcut-62 dataset, featuring works from 62 renowned historical artists, to train WDANet in absorbing and learning the aesthetic nuances of woodcut prints, offering users a wealth of design references. Based on a noise reduction network, our dual cross-attention mechanism effectively integrates text and woodcut-style image features. This allows users to input or slightly modify a text description to quickly generate accurate, high-quality woodcut-style designs, saving time and offering flexibility. As confirmed by user studies, quantitative and qualitative analyses show that WDANet outperforms the current state-of-the-art in generating woodcut-style images and proves its value as a design aid.

Lung cancer (LC) stands as the foremost cause of cancer-related fatality rates worldwide. Early diagnosis significantly enhances patient survival rate. Nowadays, low dose computed tomography (LDCT) is widely employed on chest as a tool for large-scale lung cancer screening. Nonetheless, a large amount of chest radiographs causes an onerous burden on radiologists. Some computer-aided diagnostic (CAD) tools can provide insights to medical images for diagnosis and augmenting diagnostic speed. However, due to variation in parameter settings across different patients, substantial discrepancies in image voxels persist. We find different voxel-size causing a compromise between model generalization and diagnostic efficacy. This study investigates the performance disparities of diagnostic models trained on original images and LDCT images reconstructed to different voxel-sizes but isotropic. The application is to differentiate a nodule to be benign or malignant. Using 11 features, a support vector machine (SVM) is trained on LDCT images with an isotropic voxel having side-length of 1.5 mm for 225 patients in house. The result yields a favorable model performance with an accuracy of 0.9596 and an area under the receiver operating characteristic curve (ROC/AUC) of 0.9855. In addition to furnish CAD tools for clinical applications, future research is encouraged to include LDCT images from multi-centers.

Tuberculosis (TB) disease still remain a major global threat due to the growing number of drug-resistant species and global warming. Despite the fact that there are new molecular diagnostic approaches, however, majority of developing countries and remote clinics depends on conventional approaches such as Tuberculin test, microscopic examinations and radiographic imaging (Chest X-ray). These techniques are hindered by several challenges which can lead to miss-diagnosis especially when interpreting large number of sample cases. Thus, in order to reduce workload and prevent miss-diagnosis, scientists incorporated computer-aided technology for detection of medical images known as Computer aided Detection (CADe) or Diagnosis (CADx). The use of AI-powered techniques has shown to improve accuracy, sensitivity, specificity. In this review, we discussed about the epidemiology, pathology, diagnosis and treatment of tuberculosis. The review also provides background information on Artificial Intelligence (AI), Machine Learning (ML), Deep Learning (DL), Transfer Learning (TL) and their applications in detection of tuberculosis from both microscopic slide images and X-ray images. The review also proposed an IoT/AI powered system which allows transfer of results obtained from DL models with end users through internet networks. The concept of futuristic diagnosis, limitations of current techniques and open research issues are also discussed.

One of the critical tools for early detection and subsequent evaluation of the incidence of lung diseases is chest radiography. This study presents a real-world implementation of a convolutional neural network (CNN) based Carebot Covid app to detect COVID-19 from chest X-ray (CXR) images. Our proposed model takes the form of a simple and intuitive application. Used CNN can be deployed as a STOW-RS prediction endpoint for direct implementation into DICOM viewers. The results of this study show that the deep learning model based on DenseNet and ResNet architecture can detect SARS-CoV-2 from CXR images with precision of 0.981, recall of 0.962 and AP of 0.993.

Computers and artificial intelligence affect every field of life nowadays. In medical image interpretation automatic decision making using algorithms are used increasingly in every sub-field and computer aided diagnosis (CAD) is one of the main tools available to medical science today. CAD systems are used as an augmented option for both the medical practitioner and the patients, with image analysis and interpretation being of primary importance. In particular, spatial relations are used in knowledge representation, and these relations can be used for effective medical image interpretation. In this paper, we put forth an algorithm for defining non-small cells lungs cancer (NSCLC) stages in lungs images interpretation using topological spatial relations. We show an application case study in event motion predictions for lung cancer staging scoring - tumor, nodes and metastasis (TNM) - with combined topological and directional relations.

Beyond their significant contribution to the dietary and industrial supplies, marine algae are considered to be a potential source of some unique metabolites with diverse health benefits. The pharmacological properties, such as antioxidant, anti-inflammatory, cholesterol homeostasis, protein clearance and anti-amyloidogenic potentials of algal metabolites endorse their protective efficacy against oxidative stress, neuroinflammation, mitochondrial dysfunction, and impaired proteostasis which are known to be implicated in the pathophysiology of neurodegenerative disorders and the associated complications after cerebral ischemia and brain injuries. As was evident in various preclinical studies, algal compounds conferred neuroprotection against a wide range of neurotoxic stressors, such as oxygen/glucose deprivation, hydrogen peroxide, glutamate, amyloid β, or 1-methyl-4-phenylpyridinium (MPP+) and, therefore, hold therapeutic promise for brain disorders. While a significant number of algal compounds with promising neuroprotective capacity have been identified over the last decades, a few of them have had access to clinical trials. However, the recent approval of an algal oligosaccharide, sodium oligomannate, for the treatment of Alzheimer's disease enlightened the future of marine algae-based drug discovery. In this review, we briefly outline the pathophysiology of neurodegenerative diseases and brain injuries for identifying the targets of pharmacological intervention, and then review the literature on the neuroprotective potentials of algal compounds along with the underlying pharmacological mechanism, and present an appraisal on the recent therapeutic advances. We also propose a rational strategy to facilitate algal metabolites-based drug development.

Using the techniques of computer-aided drug design, the docking of Survivin and known active small molecules was simulated and then the key amino acid residue fragment of the target protein was analyzed. It led to the discovery of active groups capable of binding to the critical sites. Through the use of the natural product, Oleanolic Acid, as a lead compound, the introduction of the active groups onto the A-ring, and the modification of the carboxyl group at the C-28 position using esterification or amidation, twenty new Oleanolic acid derivatives had been designed and synthesized.A549 and SGC-7901 cells were used to screen the antitumor activity in vitro through the standard MTT method. The compounds, II₃, III₅ and Ⅳ_4, exhibited more potent cytotoxicity than positive drugs.

In this study, a simple machine learning-based quantitative structure-activity relationship (QSAR) model was developed to predict the inhibitory potency (pIC50 values) of FLT3 tyrosine kinase inhibitors, pivotal in treating Acute Myeloid Leukemia (AML). Distinctively, our model leverages an extensive and diverse dataset, 14 times larger than those employed in prior studies within this field, enabling an unparalleled scope of compound analysis. This vast dataset, combined with further exploration of molecular descriptors, enabled predictions of extraordinary precision, covering a broader spectrum of FLT3 inhibitors than was previously possible. The Random Forest Regressor (RFR) algorithm, selected for its superior predictive performance, was trained with 1080 inputs and validated through comprehensive external and internal methods. It achieved an remarkable coefficient of determination (R^2) of 0.941 and a standard deviation of 0.235 on a test set of 270 compounds, highlighting the efficacy of model in predicting FLT3 inhibitory activity. Key molecular descriptors were identified, enhancing our understanding of structural requirements for inhibitor potency. Additionally, we developed a user-friendly computational tool that enables the rapid prediction of pIC50 values. Utilizing this tool, potential FLT3 inhibitors were identified through ligand-based virtual screening. This study represents a major advancement in FLT3 inhibitor discovery by utilizing a simple QSAR-machine learning model. It enables more efficient and precise identification of potential drug candidates at an early stage, promising a faster development of targeted therapies and streamlining the ligand-based drug design process.

This thesis presents the effects of work done on a software project for generative models and spreadsheets, allowing for a quick creation of the conceptual model of the aircraft. The subject of the work is a response to the current trends and needs prevailing in the field of computer design engineering CAD and aviation. In the initial chapters, theoretical issues related to the work being carried out were introduced and the methodology of creating software for construction and verification of the structure of aircraft along with the needs of interchange between databases of generative models was presented. In the next stages, the concepts and selected solutions for the user interface supporting the knowledge base were presented along with a set of procedures for its operation. Furthermore, the method of database integration with the methods of determining design features for the developed generative models and with the Siemens NX system. Furthermore, problems encountered in software development, as well as solution examples for model application are specified. The results obtained and the models generated on their basis were subjected to a strength analysis using Autodesk Inventor software and analysed in terms of meeting the initial assumptions. In the end, conclusions and observations resulting from the effects of the work presented in the project were formulated.

Despite the fact that COVID-19 is no longer a global pandemic due to development and integration of different technologies for the diagnosis and treatment of the disease. Technological advancement in the field of molecular biology, electronics, computer science, artificial intelligence, Internet of Things, nanotechnology etc. has led to the development of molecular approaches and computer aided diagnosis for the detection of COVID-19. This study provides a holistic approach on COVID-19 detection based on (1) molecular diagnosis which include RT-PCR, antigen-antibody and CRISPR-based biosensors and (2) computer aided detection based on AI-driven models which include Deep Learning and Transfer learning approach. The review also provide comparison between these 2 emerging technologies and open research issues for the development of smart-IoMT-enable platform for the detection of COVID-19.

After the great success of Mobile wallet, the Internet of Things (IoT) leaves the door wide open for consumers to use their connected devices to access their bank accounts and perform routine banking activities from anywhere, anytime and with any device. However, consumers need to feel safe when interacting with IoT-based payment systems, and their personal information should be protected as much as possible. Unlike as usually done in the literature, in this paper, we introduce two lightweight and secure IoT-based payment protocols based on an identity-based signature scheme. We adopt a server-aided verification technique to construct the first scheme. This technique allows to outsource the heavy computation overhead on the sensor node to a cloud server while maintaining the user's privacy. The second scheme is built upon a pairing-free ECC-based security protocol to avoid the heavy computational complexity of bilinear pairing operations. The security reduction results of both schemes are held in the Random Oracle Model (ROM) under the discrete logarithm and computational Diffie-Hellman assumptions. Finally, we experimentally compare the proposed schemes against each other and against the original scheme on the most commonly used IoT devices: a smartphone, a smartwatch and the embedded device Raspberry Pi. Compared with existing schemes, our proposed schemes achieve significant efficiency in the term of communication and computational overheads

Deep convolutional neural networks (CNNs) have been widely used in various medical imaging tasks. However, due to the intrinsic locality of convolution operation, CNNs generally cannot model long-range dependencies well, which are important for accurately identifying breast cancer from unregistered multi-view mammograms. This motivates us to leverage the architecture of Vision Transformers to capture long-range relationships of multiple mammograms from the same patient. For this purpose, we employ local Transformer blocks to separately learn patch relationships within a specific view (CC/MLO) of one side (right/left) of mammogram. The outputs from different views and sides are concatenated and fed into global Transformer blocks, to jointly learn patch relationships between two different views of the left and right breasts. To evaluate the proposed model, we retrospectively assembled a dataset involving 949 sets of CC and MLO view mammograms, which include 470 malignant cases and 479 normal or benign cases. We trained and evaluated the model using a five-fold cross-validation method. Without any arduous preprocessing steps (e.g., optimal window cropping, chest wall or pectoral muscle removal, two-view image registration, etc.), our two-view Transformer-based model achieves lesion classification accuracy of 77.0% and area under ROC curve (AUC = 0.814), outperforming state-of-the-art multi-view CNNs by 3.1% and 3%, respectively. Meanwhile, the new two-view model improves mammographic case classification accuracies of two single-view models by 7.4% (CC) and 4.5% (MLO), respectively. The promising results unveil the great potential of using Transformers to develop high-performing computer-aided diagnosis (CADx) schemes of mammography.

Melanoma is considered to be the most aggressive form of skin cancer. Due to the similar shape of malignant and benign cancerous lesions, doctors spend considerably more time when diagnosing these findings. At present, the evaluation of malignancy is performed primarily by invasive histological examination of the suspicious lesion. Developing an accurate classifier for early and efficient detection can minimize and monitor the harmful effects of skin cancer and increase patient survival rates. This paper proposes a multi-class classification task using the CoAtNet architecture, a hybrid model that combines the depthwise convolution matrix operation of traditional convolutional neural networks with the strengths of Transformer models and self-attention mechanics to achieve better generalization and capacity. The proposed multi-class classifier achieves an overall precision of 0.901, recall 0.895, and AP 0.923, indicating high performance compared to other state-of-the-art networks.

As a relatively high percentage of adenoma polyps are missed, a computer-aided diagnosis (CAD) tool based on deep learning can aid the endoscopist in diagnosing colorectal polyps or colorectal cancer in order to decrease polyps missing rate and prevent colorectal cancer mortality. Convolutional Neural Network (CNN) is a deep learning method and has achieved better results in detecting and segmenting specific objects in images in the last decade than conventional models such as regression, support vector machines or artificial neural networks. In recent years, based on the studies in medical imaging criteria, CNN models have acquired promising results in detecting masses and lesions in various body organs, including colorectal polyps. In this review, the structure and architecture of CNN models and how colonoscopy images are processed as input and converted to the output are explained in detail. In most primary studies conducted in the colorectal polyp detection and classification field, the CNN model has been regarded as a black box since the calculations performed at different layers in the model training process have not been clarified precisely. Furthermore, I discuss the differences between the CNN and conventional models, inspect how to train the CNN model for diagnosing colorectal polyps or cancer, and evaluate model performance after the training process.

In this article, we analyse the computer aid screening method of COVID19 using Xray and CT scan images. The main objective is to set an analytical closure about the computer aid screening of COVID19 among the X-ray image and CT scan image. The computer aid screening method includes deep feature extraction, transfer learning and traditional machine learning image classification approach. The deep feature extraction and transfer learning method considered 13 pre-trained CNN model. The machine learning approach includes three sets of features and three classifiers. The pre-trained CNN models are alexnet, googlenet, vgg16, vgg19, densenet201, resnet18, resnet50, resnet101, inceptionv3, inceptionresnetv2, xception, mobilenetv2 and shufflenet. The features and classifiers in machine learning approaches are GLCM, LBP, HOG and KNN, SVM, Naive bay’s respectively. In addition, we also analyse the different paradigms of classifiers. In total, the comparative analysis is carried out in 65 classification models, i.e. 13 in deep feature extraction, 13 in transfer learning and 39 in machine learning approaches. Finally, all the classification models perform better in X-ray image set compare to CT scan image set.

Small molecule inhibitors of adipocyte fatty-acid binding protein 4 (FABP4) have got interest following the recent publication of their pharmacologically beneficial effects. Recently it comes out that FABP4 is an attractive molecular target for the treatment of type 2 diabetes, other metabolic diseases, and some type of cancers. In the past years, hundreds of effective FABP4 inhibitors have been synthesized and discovered but, unfortunately, none of them is in the clinical research phase. The field of computer-aided drug design seems to be promising and useful for the identification of FABP4 inhibitors; hence, different structure- and ligand-based computational approaches were already performed for their identification. In this paper, we searched for new potentially active FABP4 ligands in the Marine Natural Products (MNP) database. 14,492 compounds were retrieved from this database and filtered through a statistical and computational filter. Seven compounds were suggested by our methodology to possess a potential inhibitory activity upon FABP4 in the range of 79–245 nM. ADMET properties prediction were performed to validate the hypothesis of the interaction with the intended target and to assess the drug-likeness of these derivatives; from these analyses, three molecules resulted as excellent candidates for becoming new drugs.

In all areas of medicine, especially in radiology, computers are increasing year by year. Filmless radiology, speech recognition software, electronic application forms, and teleradiology are recent developments that have greatly improved radiologists' performance. This research explores radiology software trends, predictions, and the challenges posed by informatics and historical trend analysis. The rationale behind this research is that information technology (IT) is overgrowing almost every day. We must continuously seek new ways to apply IT to make more use of resources. Consequently, IT becomes increasingly crucial to radiology organizations' innovative thinking, workflow, and business models. This study aimed to analyze all radiology software publications in the Science Citation Index (SCI). From 1991 to July 2021, SCI was used to search for publications systematically. We have also widely used this historical method in radiology software research. The findings and discussions are base on an assessment of trends, predictions, contributions, and challenges in radiology software, and we are exploring radiology software with six evolutionary stages. The gift of this research is that radiology managers realize that the use of new information technologies is closely related to survival in a competitive environment. Radiology companies can review these new technologies to develop more innovative business models and services to improve operational deficiencies.

The past decade has witnessed enormous progress, which has seen the noncoding RNAs (ncRNAs) turn from the so called dark matter RNA to critical functional molecules, influencing most physiological processes in development and disease contexts. Many ncRNAs interact with each other and are part of networks that influence the cell transcriptome and proteome and consequently the outcome of biological processes. The regulatory circuits controlled by ncRNAs have become increasingly more relevant in cancer. Further understanding of these complex network interactions and how ncRNAs are regulated, is paving the way for the identification of better therapeutic strategies in cancer.

Deep Neutral Networks (DNNs) were initially proposed towards the midst of the 20th century, motivated by the neural structure and mechanism of the human brain. Thanks to major ad-vancements in computational resources, during the past decade DNN-based systems have demonstrated unprecedented performance in terms of accuracy and speed. However, recent work has shown that such models may not be sufficiently robust during the inference process. Furthermore, due to the data-driven learning nature of DNNs, designing interpretable and gen-eralizable networks is a major challenge, especially in critical applications, such as medical Computer Aided Diagnostics (CAD) and other medical imaging tasks, including classification, regression and reconstruction. Within this context, a line of physics-driven approaches for deep learning has recently emerged, aimed at improving the stability and generalization capacity of DNNs for medical imaging applications. In this paper, we review recent work focused on phys-ics-driven or prior-information learning for a variety of imaging modalities and medical applica-tions. We discuss how the inclusion of domain-related knowledge into the learning process and networks’ design supports their stability and generalization capability. In addition, we highlight current and future challenges within this scope.

Uncontrolled and fast cell proliferation is the cause of brain tumors. Early cancer detection is vitally important in order to save many lives. Brain tumors can be divided into several categories depending on the kind, place of origin, pace of development, and stage of progression; as a result, tumor classification is crucial for targeted therapy. The aim of brain tumor segmentation is to accurately delineate the areas of the brain. A specialist with a thorough understanding of brain illnesses must manually identify the proper type of brain tumor. Additionally, processing a lot of images takes time and is tiresome. Therefore, automatic segmentation and classification techniques are required to speed up and enhance the diagnosis of brain tumors. Tumors can be quickly and safely detected by brain scans using imaging modalities, including computed tomography (CT), magnetic resonance imaging (MRI), and others. Machine learning (ML) and artificial intelligence (AI) have shown promise in the development of algorithms that aid in automatic classification and segmentation utilizing various imaging modalities. This review discussed various types of brain tumors, publicly accessible datasets, enhancement methods, segmentation, feature extraction, classification, machine learning techniques, and deep learning, learning through transfer, for the study of brain tumors.

This comprehensive review unfolds a detailed narrative of Artificial Intelligence (AI) making its foray into radiology, a move that is catalysing transformational shifts in the healthcare landscape. It sheds light on the journey of radiology, from the pioneering discovery of X-rays to today’s intricate imaging technologies, infused with machine learning and deep learning in medical image analysis. At the crux of this review lies an in-depth study of AI applications in radiology, elucidating its seminal roles in image segmentation, computer-aided diagnosis, predictive analytics, and workflow optimisation. A spotlight is cast on the profound impact of AI on diagnostic processes, personalised medicine, and clinical workflows, with empirical evidence derived from a series of case studies across multiple medical disciplines. However, the integration of AI in radiology is not devoid of challenges. The review ventures into the labyrinth of obstacles that are inherent to AI-driven radiology — data quality, the ’black box’ enigma, infrastructural and technical complexities, as well as ethical implications. Peering into the future, the review contends that the road ahead for AI in radiology is paved with promising opportunities. It advocates for continuous research, embracing avant-garde imaging technologies, and fostering robust collaborations between radiologists and AI developers. It concludes by firmly cementing the role of AI as a catalyst for change in radiology, a stance that is firmly rooted in sustained innovation, dynamic partnerships, and a steadfast commitment to ethical responsibility.

The extensive use of carrier-aided smoothing code (CSC) filter has led to reduce the noise level of raw code measurements in GNSS positioning and navigation applications. However, the existing CSC technique is sensitive to the changes of the integer ambiguity and then the smoothing proce-dure needs to be restarted in the presence of cycle-slips. As the Doppler shift is instantaneous ob-servation and immune to cycle-slips, Doppler-aided smoothing code (DSC) algorithm would be more promising in challenged environment. Based on the Hatch-filter, an optimal DSC approach is proposed with the principle of minimum variance. Meanwhile, to inhibit the effect of integral cumulative error of Doppler, a balance factor is adopted to adjust the contributions of raw code and DSC. The noise level of code observable is not only affected by thermal noise, but also limited by systematic bias. Satellite code bias (SCB) has been identified in the raw code observable on each frequency for each BDS-2 satellite. By minimizing the sum of absolute value of residuals, polyno-mial segment fitting algorithm as a function of elevation-angles is applied to establish the SCB cor-rection model based on epoch-differenced Multipath (MP) deviations. Finally, numerical experi-ments demonstrate the validity and efficiency of the refined DSC filter with SCB corrections on each available frequency for BDS-2 un-GEO satellites.

The prompt and accurate diagnosis of breast lesions, including the distinction between cancer, non-cancer, and suspicious cancer, plays a crucial role in the prognosis of breast cancer. In this paper, we introduce a novel method based on feature extraction and reduction for detection of breast cancer in mammography images. First, we extract features from multiple pre-trained convolutional neural network (CNN) models, and then concatenate them. The most informative features are selected based on their mutual information with the target variable. Subsequently, the selected features can be classified using a machine learning algorithm. We evaluate our approach using four different machine learning algorithms, and our results demonstrate that the neural network-based classifier yields an accuracy as high as 92% for the RSNA dataset which is a new dataset that provides two views and additional features such as age. We compare our proposed algorithm with state-of-the-art methods and demonstrate its superiority, particularly in terms of accuracy and sensitivity. For the MIAS dataset, we achieve an accuracy as high as 94.5%, and for the DDSM dataset, an accuracy of 96% is attained. These results highlight the effectiveness of our method in accurately diagnosing breast lesions and surpassing existing approaches.

Sustainability is the core concern of every business; The exploration of avenues to maintain sustainability while staying competitive with high level of productivity remains a vital endeavor. Production flexibility is a key area that can enhance the sustainability of manufacturing industries as it can ensure product availability, scalability, agility/fault tolerance as well as disaster recovery potentials. Technological advancements have provided avenues where companies can enhance virtually all aspects of their operations for efficiency, effectiveness, and productivity. This paper uses both quantitative and qualitative research approach to identify the capability requirements for smart and effective production management and subsequent analysis is done using Multi-Criteria Decision-Making methodology to identify and rank various industry 4.0 technologies and concepts that can provide these smart capabilities in in manufacturing industries to aid the businesses to achieve sustainability with production flexibility. The paper identifies over 12 smart capabilities and 9 Industry 4.0 Technologies which are applicable to production management. It also compares results from the analytics of historical I4.0 implementation as discussed in literatures with the current state as deduces from survey feedbacks from various manufacturing industries.

The cell concentration measurement on a culture assay using bioimpedance is a very useful tool, but it is complex to translate impedance to cell concentration values. The purpose of this work is to find a method to obtain in real time the cell concentration values for a given cell-culture assay using an oscillator as the measurement circuit. From a basic cell-electrode model, enhanced models of the cell culture immersed in a saline solution (culture medium) can be derived. These models can be used in a fitting routine to real time estimation of the cell concentration in a cell culture, using the oscillation frequency and amplitude delivered by measurement circuits proposed by the authors. Based on real experimental data (frequency and amplitude of oscillations) obtained by connecting the cell culture to an oscillator as a load, the fitting routine is simulated, and real time data of cell concentration is achieved. These results are compared with concentration data found by traditional optical methods for counting. In addition, the error obtained is divided and analyzed in two parts: in the first part of the experiment (when the few cells are adapting to the culture medium) and the second part of the experiment (when the cells grow exponentially until they completely cover the well).Low error values are obtained in the growth phase of the cell culture (the relevant phase), therefore the results obtained are considered to be promising, proving that the fitting routine is valid, and that the cell concentration can be measured in real time using an oscillator.

Lung cancer is the leading cause of cancer mortality worldwide, and it is urgently necessary to diagnose it as early as possible. Usually, the diagnostic process begins with a radiological examination which, when a possible tumour is present, is followed by a biopsy to extract tissue samples from the patient's lungs. Therefore, the purpose of this study is the development of an artificial intelligence algorithm that will analyse the Whole Slide Image (WSI) generated by the digitisation of the glass slides obtained from the extracted samples and detect if there is a tumour. The developed learning algorithms as well as the tested neural networks (NNs) were trained on a dataset composed of previously annotated WSI tiles, classified as Tumour or Non-Tumour. From these, four developed convolutional neural networks stood out and were selected to be compared with each other and with the tested NNs. When the best result of each of the developed architectures was compared to the highest result of the tested NNs, it was possible to denote that version 4 of CancerDetecNN achieved an average accuracy of 89.749 \% and an average loss of 0.220. Furthermore, the results for the four selected versions are in agreement with the results reported in the literature, however, the limited size of the given dataset must be considered. Given the results obtained, the fourth version has the potential to optimise the lung cancer diagnosis process.

Objective: Radiomics and deep transfer learning are two popular technologies used to develop computer-aided detection and diadnosis (CAD) schemes of medical images. This study aims to investigate and compare advantages and potential limitations of applying these two technologies in developing CAD schemes. Methods: A relatively large and diverse retrospective dataset including 3,000 digital mammograms is assembled in which 1,496 images depict malignant lesions and 1,054 images depict benign lesions. Two CAD schemes are developed to classify breast lesions. The first scheme is developed using four steps namely, applying an adaptive multi-layer topographic region growing algorithm to segment lesions, computing initial radiomics features, applying a principal component algorithm to generate an optimal feature vector, and building a support vector machine classifier. The second CAD scheme is built based a pre-trained residual net architecture (ResNet50) as a transfer learning model to classify breast lesions. Both CAD schemes are trained and tested using a 10-fold cross-validation method. Several score fusion methods are also investigated to classify breast lesions. CAD classification performance is evaluated by the area under ROC curve (AUC). Results: ResNet50 model-based CAD scheme yields AUC = 0.85±0.02, which is significantly higher than radiomics feature-based CAD scheme with AUC = 0.77±0.02 (p < 0.01). Additionally, fusion of classification scores generated by two CAD schemes does not further improve classification performance. Conclusion: This study indicates that using deep transfer learning is more efficient to develop CAD schemes and enables to yield higher lesion classification performance than CAD schemes developed using radiomics-based technology.

Manual interpretation of these huge amounts of image volumes are susceptible to inter-reader variability and human error. Thus, accurate automated CAD scheme is highly desirable in clinical pathological diagnosis. In this research, plethora of machine learning paradigms (e.g. feature extraction, dimensionality reduction and supervised classification methods) were explored, evaluated, compared and analyzed to identify the optimal pathway for brain MR images (normal vs neoplastic) binary classification task. External validation dataset was used to test the generalizability of the optimal predictive models implemented. Relevant and informative features were selected to construct cross-validated decision tree and eventually simple rule set was built based on the decision tree. The experimental results show that almost all pattern recognition paradigms achieve high accuracy with careful selection of number of attributes. LDA+ELM with 55 features are the optimal pipelines which achieve perfect classification when training and test data are of same source; and achieving (accuracy=97.5%, AUC=0.989, sensitivity=95% and specificity=100%) under balanced test dataset; (accuracy=99.5%, AUC=0.988, sensitivity=95% and specificity=100%). Cross-validated decision tree model also shows comparable performance: accuracy=98.8%, AUC=99.1%, sensitivity=99.6% and specificity=98.2%. Three highly relevant and robust attributes are visualized and selected for construction of decision tree models and finally a rule sets are read directly off the decision tree. This rule sets can potentially serve as fast and accurate classification algorithm.

Lung cancer is a deadly disease if not diagnosed in its early stages. However, early detection of lung cancer is a challenging task due to the shape and size of its nodules. Radiologists need support from automated tools for precise opinion. Automated detection of the affected lungs nodule is difficult because of the shape similarity among healthy tissues. Over the years, several expert systems have been developed that help radiologists to diagnose lung cancer. In this article, we propose a framework to precisely detect lungs cancer by classifying it between benign and malignant nodules. The framework is tested using the subset of the publicly available at the Lung Image Database Consortium image collection (LIDC-IDRI). Multiple techniques including filtering and noise removing are applied for pre-processing. Subsequently, the OTSU and the semantic segmentation are used to accurately detect the unhealthy lungs nodules. In total, 13 nodules features were extracted using Principal Components Analysis (PCA) algorithm. Four optimal features are selected based on the classification performance. In the classification phase, 9 different classifiers are used along with two types of validation schemes i.e. train test holdout validation with 70-30 data split and 10 fold cross-validation. Our experiments show that the proposed system provides 99.23\% accuracy using logic boost classifier.

Gravity-aided inertial navigation system (GAINS) is an important development in autonomous underwater vehicle (AUV) navigation. An effective path planning algorithm plays an important role in the performance of navigation in long-term underwater missions. By combining the gravity information obtained at each position with the error information from the INS, the posterior Cram\'er-Rao bound (PCRB) of GAINS is derived in this paper. The PCRB is the estimated lower bound of position variance for navigation along the planned trajectory. And the sum of PCRB is used as the minimum cost from the initial state to the current state in the state space, and the position error prediction variance of inertial navigation system (INS) is used as the minimum estimated cost of the path from the current state to the goal state in the A* algorithm. Thus, a path planning method with optimal navigation accuracy is proposed. According to simulation results, traveling along the path planed by the proposed method can rapidly improve the positioning accuracy while consuming just slightly more distance. Even when measuring noise changes, the planned path can still maintain optimal positioning accuracy, and high positioning accuracy is possible for any trajectory located within a certain range of the planned path.

Diffuse interstitial lung diseases (DILD) are a heterogeneous group of over 200 entities, some with dramatical evolution and poor prognostic. Because of their overlapping clinical, physiopathological and imagistic nature, successful management requires early detection and proper progression evaluation. This paper tests a complex networks (CN) algorithm for imagistic aided diagnosis fitness for the possibility of achieving relevant and novel DILD management data. 65 DILD and 31 normal high resolution computer tomography (HRCT) scans were selected and analyzed with the CN model. The algorithm is showcased in two case reports and then statistical analysis on the entire lot shows that a CN algorithm quantifies progression evaluation with a very fine accuracy, surpassing functional parameters’ variations. The CN algorithm can also be successfully used for early detection, mainly on the ground glass opacity Hounsfield Units band of the scan.

When using computer-aided translation systems in a typical, professional translation workflow, there are several stages at which there is room for improvement. The SCATE (Smart Computer-Aided Translation Environment) project investigated several of these aspects, both from a human-computer interaction point of view, as well as from a purely technological side. This paper describes the SCATE research with respect to improved fuzzy matching, parallel treebanks, the integration of translation memories with machine translation, quality estimation, terminology extraction from comparable texts, the use of speech recognition in the translation process, and human computer interaction and interface design for the professional translation environment. For each of these topics, we describe the experiments we performed and the conclusions drawn, providing an overview of the highlights of the entire SCATE project.

The human mandible's cancellous bone, which is characterized by its unique porosity and directional sensitivity to external forces, is crucial for sustaining biting stress. Traditional CAD models fail to fully represent bone's anisotropic structure and thus depend on simple isotropic assumptions. For our research, we use the latest versions of nTopology and Creo Parametric software to make biomimetic Voronoi lattice models that accurately reflect the complex geometry and mechanical properties of trabecular bone. The porosity of human cancellous bone is accurately modeled in this work using biomimetic Voronoi lattice models. The porosities range from 70% to 95%, which can be achieved by changing the pore sizes to 1.0 mm, 1.5 mm, 2.0 mm, and 2.5 mm. Finite element analysis (FEA) was used to examine the displacements, stresses, and strains acting on dental implants with a buttress thread, abutment, retaining screw, and biting load surface. The results show that the Voronoi model accurately depicts the complex anatomy of the trabecular bone in the human jaw, compared to standard solid block models. The ideal pore size for biomimetic Voronoi lattice trabecular bone models is 2 mm, taking into account both the von Mises stress distribution over the dental implant, screw retention, cortical bone, cancellous bone, and micromotions. This pore size displayed balanced performance by successfully matching natural bone's mechanical characteristics. Advanced finite element analysis (FEA) improves biomechanical understanding of how bones and implants interact by creating more accurate models of biological problems and dynamic loading situations. This makes biomechanical engineering better.

In the dynamic landscape of drug discovery, Computer-rAided Drug Design (CADD) emerges as a transformative force, bridging the realms of biology and technology. This paper overviews CADD's historical evolution, categorization into structure-based and ligand-based approaches, and its crucial role in rationalizing and expediting drug discovery. As CADD advances, incorporating diverse biological data and ensuring data privacy become paramount. Challenges persist, demanding the optimization of algorithms and robust ethical frameworks. Integrating Machine Learning and Artificial Intelligence amplifies CADD's predictive capabilities, yet ethical considerations and scalability challenges linger. Collaborative efforts and global initiatives, exemplified by platforms like Open Source Malaria, underscore the democratization of drug discovery. The convergence of CADD with personalized medicine offers tailored therapeutic solutions, though ethical dilemmas and accessibility concerns must be navigated. Emerging technologies like quantum computing, immersive technologies, and green chemistry promise to redefine the future of CADD. The trajectory of CADD, marked by rapid advancements, anticipates challenges in ensuring accuracy, addressing biases in AI, and incorporating sustainability metrics. The paper concludes by highlighting the need for proactive measures in navigating the ethical, technological, and educational frontiers of CADD to shape a healthier, brighter future in drug discovery.

Thanks to the continued development of experimental structural biology and the half-a-century old Protein Data Bank, 2021 saw a big step forward in the development of protein structure prediction with deep learning algorithms. Recently, DeepMinds AlphaFold has determined the structures of ∼ 200 million proteins from 1 million species. The speed of this progress raise the question of what becomes possible for computational drug discovery and design when we have a systems-wide account of the structures and motions of most proteins. Therefore, this article puts forward the concept of a general intermolecular binding affinity calculator (GIBAC): Kd = f(molA, molB, envPara), towards the acceleration of traditional computer-aided drug design (CADD) and artificial intelligence-integrated drug discovery (AIDD), for both small molecules and biologics such as therapeutic proteins.

Pure orbital blowout fractures occur within the confines of the internal orbital wall. Restoration of orbital form and volume is paramount to prevent functional and esthetic impairment. The anatomical peculiarity of the orbit has encouraged surgeons to develop implants with customized features to restore its architecture. This has resulted in worldwide clinical demand for patient-specific implants (PSIs) designed to fit precisely in the patient's unique anatomy. Fused filament fabrication (FFF) three-dimensional (3D) printing technology has enabled the fabrication of implant-grade polymers such as Polyetheretherketone (PEEK), paving the way for a more sophisticated generation of biomaterials. This study evaluates the FFF 3D printed PEEK orbital mesh customized implants with a metric considering the relevant design, biomechanical, and morphological parameters. The performance of the implants is studied as a function of varying thicknesses and porous design constructs through a finite element (FE) based computational model and a decision matrix based statistical approach. The maximum stress values achieved in our results predict the high durability of the implants, and the maximum deformation values were under one-tenth of a millimeter (mm) domain in all the implant profile configurations. The circular patterned implant (0.9 mm) had the best performance score. The study demonstrates that compounding multi-design computational analysis with 3D printing can be beneficial for the optimal restoration of the orbital floor.

Medical brain image analysis is a necessary step in the Computers Assisted /Aided Diagnosis (CAD) systems. Advancements in both hardware and software in the past few years have led to improved segmentation and classification of various diseases. In the present work, we review the published literature on systems and algorithms that allow for classification, identification, and detection of White Matter Hyperintensities (WMHs) of brain MRI images specifically in cases of ischemic stroke and demyelinating diseases. For the selection criteria, we used the bibliometric networks. Out of a total of 140 documents we selected 38 articles that deal with the main objectives of this study. Based on the analysis and discussion of the revised documents, there is constant growth in the research and proposal of new models of deep learning to achieve the highest accuracy and reliability of the segmentation of ischemic and demyelinating lesions. Models with indicators (Dice Score, DSC: 0.99) were found, however with little practical application due to the uses of small datasets and lack of reproducibility. Therefore, the main conclusion is to establish multidisciplinary research groups to overcome the gap between CAD developments and their complete utilization in the clinical environment.

Determination of indoor location based on fine time measurement (FTM) of the round trip time (RTT) of a signal between an initiator (smartphone) and a responder (Wi-Fi access point) enables a number of applications. However, the accuracy currently attainable — standard deviations of 1–2 meter in distance measurement under favorable circumstances — limits the range of possible application. A first responder, for example, may not be able to unequivocally determine on which floor someone in need of help is in a multi-story building. The error in location depends on several factors, including the bandwidth of the RF signal, delay of the signal due to the high relative permittivity of construction materials, and the geometry-dependent “noise gain” of location determination. Errors in distance measurements have unusual properties that are exposed here for the first time. Improvements in accuracy depend on understanding all of these error sources. This paper introduces “frequency diversity,” a method for doubling the accuracy of indoor location determination using weighted averages of measurements with uncorrelated errors obtained in different channels. The properties of this method are verified experimentally with a range of responders. Finally, different ways of using the distance measurements to determine indoor location are discussed and the Bayesian grid update method shown to be more useful than others, given the non- Gaussian nature of the measurement errors.

Three-dimensional (3D) printing technologies are transforming the design and manufacture of components and products across a variety of disciplines, however their application in the construction industry is still limited. Material deposition processes can achieve infinite geometries and have advanced from rapid prototyping and model-scale markets to their application in fabricating functional products, large objects and the construction of full-scale buildings. Many international projects have recently been realized and the construction industry is beginning to utilise these dynamic technologies. The potential advantages for integrating 3D printing into house construction are significant, these include the capacity for mass customization of designs and parameters for functional and aesthetic purposes, reduction in construction waste from highly precise material placement, and the use of recycled waste products in layer deposition materials. With the ultimate goal of improving construction efficiency and decreasing building costs, applying Strand7 Finite Element Analysis software, a numerical model was designed specifically for 3D printing in a cement mix incorporated with recycled waste product High Density Polyethylene (HDPE) and found that construction of an arched truss-like roof was structurally feasible without the need for steel reinforcements. The lab sizes prototypes were manufactured based on the destined numerical model by using a 3D printing technology. Currently available 3D printing technologies can be adopted for building construction and this paper discusses the applications, advantages, limitations and future directions of 3D printing as an innovative and viable solution for affordable house construction.