This study aimed at testing the effectiveness of novel combinations of chemical and physical methods to control Prosopis juliflora, an invasive weed in the Moshi and Simanjiro districts of Nothern Tan-zania. Six different treatments including manual uprooting, glyphosate, bark chop with chemical application, two separate chemical mixtures and control were tested in a total of 32 plots, which represented two land use types (grazing land and farmland) found in the two districts. Each plot covered 20m×30m plot area. Two response variables (stem count and tree volume) were recorded to compare weed population density before and after treatment six months later. An analysis of the untreated control plots, showed that the inherent growth potential of P. juliflora was higher in Moshi than in Simanjiro district. The number of stems increased during the experiment for all six treatments showing that the P. juliflora population had not yet reached the local carrying capacity. For the manual control treatment, the increase was reduced compared to the untreated control. For all other treatments, the increase in stem count was on par with that in the untreated control or even higher. Thus, we conclude that only manual uprooting had a controlling effect but not to the extent that it eradicated P. juliflora. Thus, it is for P. juliflora as for weed control in general: weed control must be an ongoing effort.

The latest EU regulation on geographical indications (EU Regulation No. 1151/2012) has intro-duced a set of new tools for the protection and enhancement of food products in rural areas, under the group name of optional quality term (OQT). The Commission Delegated EU Regulation, No. 665/2014, regulated the conditions for the use of the optional quality term «mountain product» (MP), to support the implementation of a mountain value chain. This new tool is aimed at pro-moting local development, maintaining the economic activities in mountain areas and redistrib-uting wealth, whilst, at the same time, promoting the territory. Pecorino and goat cheeses are typ-ical Italian cheeses made usually with whole raw ewe's or raw goat's milk, without starter cul-ture addition. In an attempt to characterize these productions, the aim of this study was to inves-tigate the evolution of enterococci during the production and ripening of Pecorino cheese made in three different farms, located in Umbria, Italy in areas facing natural or other specific constraints as stipulated by Regulation 1305/2013 on support for rural development by the European Agri-cultural Fund for Rural Development (EAFRD). Enterococci are enteric organisms which are commonly isolated from ewe and goat's milk production in Umbria, Italy. Counts of enterococci in raw milk ranged from 1.75 for ovine milk to 3.62 for ewe milk and a marked reduction was observed after thermization especially in ovine milk. Out of 100 isolates, 69 were E. faecium, 23 E. durans, 8 E. faecalis and 2 E. casseliflavus and the distribution of species between farms and be-tween samples showed a prevalence of E. faecium in ovine farms and E. durans in ewes farms, with an equal distribution between samples. High percentages of susceptible isolates were found for amoxicillin/clavulanic acid, ampicillin, chloramphenicol, sulphamethoxazole, sulphameth-oxazole/trimethoprim, ticarcillin, vancomycin. A high prevalence of resistant strains (> 30%) was observed for amikacin, ciprofloxacin, ceftriaxone, kanamycin, tetracycline. A comparison of this results with those of previous works on similar dairy products revealed high levels of resistance to antimicrobials which needs to be addressed.

Coronaviruses are positive sense RNA virus belonging to the Coronaviridae family, which are further subdivided into four genera: Alpha, Beta, Gamma, and Delta Coronaviruses. Infectious bronchitis virus and SARS-CoV belong to Beta Coronaviridae family. Infectious bronchitis virus causes respiratory and nephritic signs that includes tracheal rales, urate crystals, lethargy and nasal discharge. In livestock and pets, the Coronavirus infection causes mostly gastrointestinal lesions, which may be prevented through vaccination and biosecurity. Recent infections of SARS-CoV-2 (also known as COVID-19) on farm and pet animals were summarized in this study. Besides, zoo animals were reported with infections in some countries/regions. Although the damage of COVID-19 has not been reported as serious as highly pathogenic avian influenza (HPAI) and African Swine Fever (ASF) on farm animals so far, the transmission mechanism of COVID-19 among group animals/farms and its long-term impacts are still not clear. The impact of Coronavirus on animals and potential prevention strategies, such as vaccine development and farm biosecurity measures, were discussed. Prior to the development of the effective vaccine, the biosecurity measures (e.g., conventional disinfection strategies and innovated technologies) may play roles in preventing potential spread of diseases/viruses.

There are numerous hazards found on the farms. Most of them are ignored, which might cause the farmer to pay later in terms of his ill health, potential injuries or death. The current article discusses some of the common issues such as dust and air quality concerns; environmental (weather) stressors and psychological stressors; noise and hearing protection; and tractor safety and seatbelt use. And finally, the recommendations to overcome the hazards are discussed.

The present protocol described staining protocol for Reactive Oxygen Species (ROS) in aromatic crop grown under nutrient stress through DAB and NBT histochemical method. Spearmint (Mentha spicata) were grown under manganese and salt toxicity stresses and after 10 and 20 days of the stress treatments, plants showed stunted growth. The morphological characteristics of leaves under stresses were observed. Manganese toxicity and salt stress induced the production of ROS. Accumulation of hydrogen peroxide was characterised as brown spots from the DAB polymerisation which were emerged and clearly observed in leaves from plant grown under 2.5 and 5 mM concentrations of manganese as well as 300 mM concentration of salt. Furthermore, accumulation of superoxide anion was characterised as blue pigments based upon the ability of cells to reduce NBT. Spearmint leaves showed the distribution of the blue pigment which was obviously observed under the 5 mM of manganese and 300 mM of salt. DAB and NBT staining method can be the rapid method to characterise ROS accumulation in plant cell under the abiotic stresses.

In recent years, the manufacturing sector has benefited from a variety of technological innovations regarding automation and utilization of artificial intelligence on the shopfloor. During the manufacturing processes of a product, a variety of meta data can be derived from each working step and considered during subsequent stages of its liefycle like shipment, utilization or recycling. With upcoming regulations decided by the European Union, manufacturers must begin to react to the demand of a comprehensive circular economies by introducing technical solutions like Digital Product Passports (DPP). By associating the specific conditions of all stages in the life of a product within a digital identity, e.g., the DPP, transparency and efficiency can be increased. The Gaia-X service landscape aims at realizing federated data infrastructures, enabling robust and transparent services while considering data sovereignty. In this work, a modular and generic multi-tenant framework for utilizing DPPs within cross-company ecosystems is presented with respect to the manufacturing sector. In applying the Secret Network-blockchain for implementing the automation of DPP management processes, premises for Gaia-X compliance and therefore strengthened trust-anchors are realized. By considering details of ecosystems, as well as most interesting security threats to the proposed architecture, a holistic view of applying DPPs in the context of smart production supply chains is shown. In presenting a simple but vivid use case of the production and compilation of car wheels, the fundamental benefits of the work on hand are underlined, once more.

In this paper, the classical least square (CLS) method with molecular absorption spectrophotometric measurement was used to determine simultaneously of paracetamol (PAR), ibuprofen (IBU), and caffeine (CAF) in tablets. The absorbance spectra of the standard solutions and samples were measured over a wavelength from 220 to 300 nm with a 0.5 nm step. The concentration of PAR, IBU and CAF in the sample solutions were calculated by using a program called CLS-Excel written in Microsoft Excel 2016 and Visual Basic for Applications (VBA). The method and CLS-Excel program were tested on mixed standard laboratory samples with different PAR, IBU, and CAF concentration ratios, and they showed small errors and satisfying repeatability. An analytical procedure for tablets containing PAR, IBU, and CAF was developed. The reliability of the procedure was proved via the recovery and repeatability of the analysis results with an actual tablet sample and comparing the mean contents of active substances in the tablets obtained from the analytical procedure with the from the HPLC method. The procedure is simple with a reduced cost compared with the HPLC standard method.

Abstract: The study used whole-genome sequencing (WGS) and bioinformatics analysis for the genomic characterization of 60 isolates of Listeria monocytogenes isolated from cattle farms, cattle abattoirs, and retail outlets in Gauteng province, South Africa. The isolates' sequence types (STs), clonal complexes (CCs), and lineages were determined using in silico multilocus sequence typing (MLST). We used BLAST-based analyses to identify virulence and antimicrobial genes, plasmids, proviruses, and the CRISPR-Cas system. The study investigated any association of the detected genes to the origin in the beef production chain of the L. monocytogenes isolates. Overall, in 60 isolates of Listeria monocytogenes, there were 7 STs, 6 CCs, 44 putative virulence factors, 2 resistance genes, 1 plasmid with AMR genes and 3 with conjugative genes, 1 CRISPR gene, and all 60 isolates were positive for proviruses. Among the 7 STs detected, ST204 (46.7%) and ST2 (21.7%) were the most prominent, with ST frequency varying significantly (p<0.001). The predominant CC detected were CC2 (21.7%) and CC204 (46.7%) in lineages I and II, respectively. Of the 44 virulence factors detected, 26 (across Listeria Pathogenicity Islands, LIPIs) were present in all the isolates. The difference in the detection frequency varied significantly (P<0.001). The two AMR genes (fosX and vga(G)) detected were present in all 60 (100%) isolates of L. monocytogenes. The only plasmid, NF033156, was present in 3 (5%) isolates. A CRISPR-Cas system was detected in 6 (10%), and all the isolates carried proviruses. Significant differences were detected in the frequencies of STs and virulence factors regarding the source and sample type of the L. monocytogenes isolates. The presence of both fosX and vga(G) genes in all the isolates from the three industries (cattle farms, abattoirs, and retail outlets) can potentially cause therapeutic implications. Our study, which characterized L. monocytogenes recovered from the three levels in the beef production chain in the country, provides the first evidence of the distribution of the pathogen with potential food safety and therapeutic implications.

Bio-inspired gyroid triply periodic minimum surface (TPMS) lattice structures have been the focus of research in automotive engineering because they can absorb a lot of energy and have wider plateau ranges. The main challenge is determining the optimal energy absorption capacity and accurately capturing plastic plateau areas using finite element analysis (FEA). Using nTop's Boolean subtraction method, this study combined walled TPMS gyroid structures with normal TPMS gyroid lattice. This made a composite TPMS-gyroid lattice with relative densities ranging from 14% to 54%. Using the ideaMaker software and the fused deposition modeling (FDM) Raise3D Pro 2 3D printer to print polylactic acid (PLA) bioplastics in 1.75 mm filament made it possible to slice computer aided design (CAD) models and fabricate 36 lattices samples precisely layer by layer technique. Shimadzu 100kN testing equipment was utilized for the mechanical compression experiments. And the validation using finite element analysis (FEA). Further, CTG was examined using a field emission scanning electron microscope (FE-SEM) before and after compression testing. The composite TPMS gyroid lattice showed potential as shock absorbers for vehicles with relative densities of 33%, 38%, and 54%. The Gibson-Ashby model showed that the composite TPMS gyroid lattice deformed mainly by bending, and the size effect was seen when the relative densities were less than 15%. The lattice's relative density had a significant impact on its ability to absorb energy. The research also explored the use of these innovative foam-like composite TPMS-gyroid lattices in high-speed crash box scenarios, potentially enhancing vehicle safety and performance.

This paper reports on the optimization of thin-film coating assisted self-sustainable off-grid hybrid power generation systems for cattle farming in rural areas of Bangladesh. Bangladesh is a lower middle-income country with declining rates of poverty among its 160 million people due to persistent economic growth in conjunction with balanced agricultural improvements. Most of the rural households adopt a mixed farming system by cultivating crops and simultaneously rearing livestock. Among the animals raised, cattle are considered as the most valuable asset for the small/medium-scale farmers in terms of their meat and milk production. Currently, along with the major health issue, the COVID-19 pandemic is hindering the world’s economic growth and has thrust millions into unemployment; Bangladesh is also in this loop. However, natural disasters such as COVID-19 pandemic and floods, largely constrain rural smallholder cattle farmers from climbing out of their poverty. In particular, small and medium-scale cattle farmers face many issues that obstruct them from taking advantage of market opportunities and imposing a greater burden on their families and incomes. An appropriate measure can give a way to make those cattle farmers’ businesses both profitable and sustainable. Optimization of thin-film coating assisted self-sustainable off-grid hybrid power generation system for cattle farming is a new and forward-looking approach for sustainable development of the livestock sector. In this study, we design and optimize a thin-film coating assisted hybrid (photovoltaic-battery-generator) power system by using the Hybrid Optimization of Multiple Energy Resources (HOMER, Version 3.14.0) simulation tool. An analysis of the results has suggested that the off-grid hybrid system is more feasible for small and medium-scale cattle farming systems with long-term sustainability to overcome the significant challenges faced by smallholder cattle farmers in Bangladesh.

This study investigates the influence of expectations and trust on farmers' decisions regarding contractual choices in land transfer. The dataset used for analysis consists of 1101 households in Guizhou Province. The research focuses on two aspects: the selection between written and oral contracts, and the decision to continue the contractual relationship. The findings reveal that farmers' choices are significantly affected by their expectations and levels of trust.Specifically, when farmers' expectations regarding the land transfer process are not met, they tend to prefer written contracts over oral ones. This preference can be attributed to the greater clarity and risk reduction offered by written contracts. On the other hand, higher levels of trust increase the likelihood of farmers continuing the land transfer contract, as trust fosters a sense of confidence and security in the ongoing relationship.Interestingly, trust also plays a moderating role. Farmers who have aligned expectations and high levels of trust are more inclined to opt for oral contracts. This preference for oral contracts can be attributed to their flexibility and emphasis on interpersonal relationships, allowing for better adaptation to the changing dynamics of land transfer.These findings contribute to a deeper understanding of the factors influencing farmers' decision-making processes regarding contractual choices in land transfer. They provide valuable insights for policymakers involved in land transfer, enabling them to optimize policies and facilitate farmers' decision-making processes.

Polyhydroxyalcanoates (PHAs) are biodegradable polymers synthesized in cytoplasmic granules in bacteria, such as Cupriavidus necator (Ralstonia eutropha), Alcaligenes latus, Pseudomonas spp., Comamonas spp. and other species. PHAs accumulation occurs in response to stress conditions, i.e. under high carbon and low nitrogen (24:1 ratio). PHA can be synthesized using recombinant microorganisms (provided with the operon phbA/phbB/phbC), escaping the constrains of nutrient request, except addition of high amount of sugar (glucose, lactose, fructose). In this study; E. coli was genetically modified for PHB production in biofermentors. The production of PHA at industrial scale requires a continuous supplementation of fermentable sugars to support the availability of nutrients and to assess the level of the exponential growth phase; since sugars are required either for bacterial growth either for PHA synthesis and energy storage. The biofermentors need to be run in automated system. Sensors are used at many points in fermentators; in the evaluation of parameters: consumption of sugars; cell density; quantification of PHB synthesis. The need of operational control during the fermentation has prompted us to application of three measurements; one unit linked to a Nanodrop to evaluate OD; one linked to a reaction chamber to measure sugars consumed by enzyme based fluorescence detection; and one for bacteria Nile Blue staining and fluorescence intensity reads. The growth of bacteria on three different plant by-products was monitored and PHB production in four days using a banana by-product feed was optimised. These detectors will make possible to exploit the full potential of bioreactors optimizing the time of use and maximizing the number of bacteria synthesizing PHA.

Increasingly, firms are expected to implement ESG (Environment, Social, and Governance) mandates to appeal to the global market. However, this requires overcoming practical challenges and capitalizing on emerging opportunities. This paper conducts an in-depth analysis of the ESG practices of leading Korean global firms. The study selects five firms for case studies representing industries such as electronics, automotive, steelmaking, and chemicals. It examines ESG reports, performance indicators, and corporate disclosures of these firms. The analysis reveals the adoption of industry-specific ESG strategies, highlighting how these firms tailor their approaches to address unique industry challenges while aligning with global sustainability trends. Key findings include a strong emphasis on innovative solutions to ESG challenges, the integration of ESG into core business operations, and a balanced approach to economic, social, and environmental responsibilities. This study contributes to a broader understanding of how ESG practices are implemented in various industrial contexts, particularly in the dynamic and evolving landscape of Korean global businesses. It offers valuable insights and benchmarks for global companies, underlining the importance of contextualized and industry-specific ESG strategies in achieving sustainable and ethical business practices

Friction stir welding (FSW) is a solid state welding process for joining metallic alloys and dissimilar metals. It has emerged as an alternative technology for welding high strength alloys that are difficult to join with conventional techniques. FSW is used to produce products with better mechanical properties. Now a days aluminum alloys have been widely used in several industrial applications such as aerospace, marine, automobile and commercial applications due to their light weight structure, better mechanical properties and high corrosion resistance.In this work, three welding parameters such as spindle speed, welding speed and plunge depth were considered for friction stir welding. FSW was carried out between dissimilar aluminum alloy plates (AA6061 and AA 8011) to produce butt joint.A Box-Behnken design with three factors and three levels was chosen to minimize the number of experimental conditions .The tensile strength and hardness of the welded regions were evaluated. The optimum level settings and the major parameters that influence the joint strength were obtained by Box-Behnken design.

Many farms are replacing the lighting with light emitting diode (LED) bulbs because of the technological modernization. We aimed to investigate the effects of incandescent light (IL) and LED lighting on Cobb500 broiler chickens for six weeks. Production parameters (body weight, feed consumption, feed conversion ratio), calculated slaughter values (yield%, relative breast%, thigh%) and breast meat quality parameters (pH at 45 min and 24 h postmortem, color, drip loss, kitchen equipment losses, shear force, meat composition) were recorded. Non-stop recordings were used to analyze the behavior of the birds in several periods of the rearing. LED group was significantly better in body weigh parameter between week 1-5 and feed conversion ratio between week 2-3. The most significant difference in behavior was observed in the middle of the rearing period. The chickens in the LED group spent more eating time, drinking time, interacting, and resting less. There was no difference in the meat quality parameters, only shear force was significantly lower in the LED group (1781.95±0.33 g/s vs. 2098.82±0.42 g/s). Based on our results, LED lighting can bring positive changes in animal production efficiency, behavior, and important characteristics for meat consumers.

While smartphones offer numerous benefits, their usage also poses potential drawbacks, particularly for adolescents. Notably, there has been limited research focusing specifically on Muslim adolescent students in Thailand. This study seeks to address this gap by examining the prevalence and family factors influencing smartphone addiction (SA) among 825 Muslim secondary school students across three provinces in Southern Thailand. Employing purposive sampling, the research highlights a concerning 70% rate of SA. The investigation reveals a link between parental education levels and smartphone usage among adolescents. Utilizing a structural equation model (SEM), family functioning dimensions such as ‘Emotional Status’ and ‘Discipline’ are shown to have a considerable impact on SA. Contrary to expectations, enhanced ‘Family Support’ has emerged as a potential risk factor, suggesting nuances in family dynamics that may contribute to SA. The findings advocate for the reinforcement of family functioning and call for initiatives to improve digital literacy and foster open communication between parents and children. However, the reliance on self-reported measures and the cross-sectional nature of the study underlines the necessity for more expansive future research to validate these findings and explore underlying mechanisms.

Reasonable allocation of production plans and saving the overall electricity cost are crucial for large manufacturing conglomerates, which is an effective way for conglomerates to realize open-source and cost-saving. This paper develops an optimization model of off-site industrial production scheduling for enterprises in response to the problems of high electricity costs due to the irrational allocation of production schedules on the demand side of China's electric power and the difficulty of promoting industrial and commercial distributed photovoltaic (PV) projects in China. The model makes full use of the conditions of different PV resources and different electricity prices in different places to optimize the scheduling of industrial production in different places. The model is embedded with two sub-models of the electricity price prediction model and distributed photovoltaic kWh cost model to complete the model parameters, in which the electricity price prediction model utilizes the LSTM neural network. The integrated model is then solved by the particle swarm algorithm. To verify the effectiveness of the model in solving the problem of off-site production scheduling on the demand side of electricity, the research team researched two off-site pharmaceutical factories belonging to the same large pharmaceutical company. Finally, the research data were substituted into the model for solving, and it was concluded that the optimization model could significantly reduce the cost of electricity consumption of the enterprise by about 7.9 %.

China's cotton production has shown a concentration to the advantageous regions in recent years. Based on the relevant data of cotton production in China, the study measures the cotton production agglomeration levels of 16 major cotton-producing provinces from 1978 to 2020, summarizes the spatiotemporal evolution characteristics of cotton production agglomeration, and analyzes the factors influencing cotton production agglomeration using spatial econometric models. The results indicate that: Firstly, since the opening-up and reform, China's cotton production agglomeration levels have shown an overall upward trend, exhibiting periodic dynamic changes over time, and the spatial pattern reveals a dynamic regional gradient. Secondly, there is spatial correlation among the production scales of cotton in different provinces, with a trend resembling a "U" shape, and the agglomeration form shows a low-level convergence. Thirdly, technological level, policies, substitute industrial products and foreign trade are identified as important factors. The cotton production in each province is spatially correlated through these factors, and there is also a presence of spillover effects. In conclusion, the government should prioritize considerations of various influencing factors to formulate tailored support policies, promote large-scale production to enhance technological levels, and focus on policies aimed at improving the quality of cotton.

The main obstacle affecting the natural and herbal products industry is the infringement of trade patents. This resulted in losing the opportunity to compete with others in this business. Creating additional value to this business is, therefore, a way of leading to patenting for trade protection for entrepreneurs. This study was conducted to develop the structural equation modeling of guidelines for creating additional value for Thai herbs to support trade patent. The study comprises a mixed method with three parts. In the first part, data comes from interviews with selected 9 specialists. The second part was supported by interviews to create the questionnaire and distributed it to 500 entrepreneurs, the next step was the data analysis using structural equation modeling (SEM). The third part used data from the SEM model to discussion focused on developing the conceptual model by 7 experts. The analysis of the developed model passed the criteria for evaluating consistency and empirical data. All hypotheses proposed in this study were supported, the findings revealed that all factors had a direct effect at a statistically significant level of 0.001. Furthermore, this investigation allows knowing the Brand Identity factor were practically important for creating value of Thai herbs leading to patent protection.

The paper presents modelling of relationships between wind velocity distributions observed in Poland and technical requirements for wind power stations design. The wind velocities distributions for various locations in Poland are determined, and expressed in Weibull distribution parameters. Theoretical computations concerning the dependence of wind power station as function of wind speed and aire physical properties are presented. Conclusions important for design of power stations fitted to atmospheric conditions in Poland are given. Wind power plants have been an important source of electricity generation for many years.Wind power modelling with the use of wind speed is used to improve the accuracy of forecasts and analyses of the power production of wind farms.

Nearly half a century has passed since the discovery of cytoplasmic inheritance of human chloramphenicol resistance. The inheritance was then revealed to take place maternally by mitochondrial DNA (mtDNA). Later, a number of mutations in mtDNA were identified as a cause of severe inheritable metabolic diseases with neurological manifestation, and the impairment of mitochondrial functions has been probed in the pathogenesis of a wide range of illnesses including neurodegenerative diseases. Recently growing number of preclinical studies has revealed that animal behaviors are influenced by the impairment of mitochondrial functions and possibly by the loss of mitochondrial stress resilience. Indeed, as high as 54% of patients with one of the most common primary mitochondrial diseases, mitochondrial encephalomyopathy with lactic acidosis and stroke-like episodes (MELAS) syndrome, present psychiatric symptoms including cognitive impairment, mood disorder, anxiety, and psychosis. Mitochondria are multifunctional organelles which produce cellular energy and play a major role in other cellular functions including homeostasis, cellular signaling, and gene expression, among other. Mitochondrial functions are observed to be compromised and to become less resilient under continuous stress. Meanwhile, stress and inflammation have been linked to the activation of the tryptophan (Trp)-kynurenine (KYN) metabolic system, which observably contributes to development of pathological conditions including neurological and psychiatric disorders. This narrative review discusses the functions of mitochondria and the Trp-KYN system, the interaction of the Trp-KYN system with mitochondria, and the current understanding of the involvement of mitochondria and the Trp-KYN system in preclinical and clinical studies of major neurological and psychiatric diseases.

The objective of this study was to investigate age-related changes in cashmere production and the population of active secondary hair follicles in cashmere goats across different age groups, as well as to explore the association between secondary hair follicle activity and oxidative stress. A total of 104 adult Inner Mongolian ewe goats, aged between 2 and 7 years old, were randomly selected as experimental subjects. Skin samples were collected in August 2020 and cashmere samples were collected in April 2021. The cashmere fiber yield, staple length, and diameter showed age-related variations in cashmere goats aged 2 to 7 years (P < 0.05). Cashmere production was higher in goats aged 2-4 years compared to those aged 5-7 years (P < 0.05). There were no significant differences in the population of primary and secondary hair follicles among goats aged 2 to 7 years. However, the population of active secondary hair follicles varied significantly with age, with the younger group (aged 2-4 years) having a higher population than those aged 5 – 7 years (P < 0.05). A moderate negative correlation was observed between cashmere fiber diameter and the population of active secondary hair follicles (P < 0.05). Age-related variations in skin antioxidant capacity and oxidative damage were observed among cashmere goats aged 2 to 7 years old (P < 0.05). Goats aged 2 to 4 years exhibited higher antioxidant capacity and lower oxidative damage (P < 0.05). Interestingly, the skin antioxidant capacity and oxidative damage exhibited significant positive and negative correlations, respectively, with the population of active secondary hair follicles (P < 0.05). This study presents a novel approach to enhance the activity of secondary hair follicles and improve cashmere production performance through the regulation of oxidative stress.

Cell-culture meat is a novel concept to replace traditional meat produced from animals, and to satisfy rising food demands due to the world population growth. It is still a young field and requires to solve technical issues including cell sources and types, efficient culture for large scale production, taste and texture for customer satisfaction. The current review summarized traditional beef meat production and evaluation methods for customer satisfaction. In particular, serum biomarkers for beef meat evaluation are discussed, which can be applicated for cell-culture meat production.

To better understand farmers’ refusal and corresponding negative emotions to pay agricultural water fee under current policy in rural China, this paper applies mental accounting, a behavioral economics framework, to explore how the governmental policies of reform of rural taxes and fees, direct agricultural subsidy programs and agricultural water fee individually influence farmers’ decisions in paying agricultural water fee. Using fieldwork data from 577 farmers and 20 water managers in Sichuan, we explore farmers’ information processing regarding paying agricultural water fee via three sequential mental accounting processes, with the associated underlying principles and measures behind each process. We find that the information processing in three mental accounting scenarios related to the agricultural water fee elucidates farmers’ observed behaviors in rural China. Generally, in the three mental accounting scenarios, two conditional intuitive expectations and nine conditional intuitive preferences are formed, however, the conditions of those expectations or preferences cannot be matched with the facts due to the reform of rural taxes and fees, the direct agricultural subsidy programs and the internal attributes of agricultural water fee, which interpret those negative behaviors in rural China. Additionally, this paper offers a view into how previous policies create negative psychological externalities (such as farmers’ psychological dependence on the government) through mental accounting to negatively influence agents’ subsequent decision making; it highlights the significance of underlying mental factors and information processing of negative behaviors in policymaking for managing or conserving common pool resources.

A population dynamics epidemic model is developed that incorporates age of infection and age of vaccination. The model analyzes pre-symptomatic and symptomatic periods of an infected individual in terms of infection age. The model analyzes the efficacy of vaccination in terms of vaccination age. The model is applied to the 2003 SARS epidemic in Taiwan and the current COVID-19 epidemic in New York State.

A growing number of households benefit from the government subsidies to install renewable generation facilities such as PV panels, used to gain independence from the grid and provide cheap energy. In the Romanian electricity market, these prosumers can sell their generation surplus only at regulated prices, back to the grid. A way to increase the number of prosumers is to allow them to make higher profit by selling this surplus back into the local network. This would also be an advantage for the consumers, who could pay less for electricity exempt from network tariffs and benefitting from lower prices resulting from the competition between prosumers. One way of enabling this type of trade is to use peer-to-peer contracts traded in local markets, run at microgrid (μG) level. This paper presents a new trading platform based on smart peer-to-peer (P2P) contracts for prosumers energy surplus trading in a real local microgrid. Several trading scenarios are proposed, which give the possibility to perform trading based on participants’ locations, instantaneous active power demand, maximum daily energy demand and the principle of first come first served implemented in an anonymous blockchain trading ledger. The developed scheme is tested on a low-voltage (LV) microgrid model to check its feasibility of deployment in a real network. A comparative analysis between the proposed scenarios, regarding traded quatities and financial benefits is performed.

Despite the efforts made to stop the tuberculosis (TB) epidemic, it still remains one of the leading causes of death from an infectious disease. Previous work in the group uncovered a new family of amides which showed promising activities against Mycobacterium tuberculosis. A closer look at the literature showed that these compounds are structurally related to the DNB family of DprE1 inhibitors, so, we decided to study a wide range of substituted amides and determine their activity, focusing on unexplored structures related to the dinitrobenzamides (DNB) found in the literature. To synthesize our library of compounds we started from 3,5-dinitrobenzoic acid to form the nitroaromatic core that is characteristic of the DNB’s, to which we then added linear or cyclic amine moieties. Additionally, the impact of terminal aromatic moieties was also assessed for some derivatives, via an ether, ester, or amide bond. In order to obtain the desired derivatives, multiple synthetic approaches were used, mainly focused on nucleophilic addition/elimination reactions, SN2 reactions and Mitsunobu reactions. The activity was impacted mainly by two structural features, the addition of an aromatic moiety as a terminal group and the type of the linker. The most interesting compounds exhibited activities comparable to isoniazid and DNB1. Computational studies were also performed aimed at understanding their possible interactions with DprE1. The most active compounds are a good starting point for further development, and we plan to study an extended family of compounds based in those structures.

Fine chemicals are produced in small annual volume batch processes (often &lt;10,000 tonnes per year), with a high associated price (usually &gt; $10/kg). As a result of their usage in the production of speciality chemicals, in areas including agrochemicals, fragrances and pharmaceuticals, their necessity will remain high for the foreseeable future. This review article assesses current methods used to produce fine chemicals with heterogeneous catalysts, including both well-established methods as well as newer experimental methods. A wide range of methods utilising microporous and mesoporous catalysts has been explored, including their preparation and modification before use in industry. Their potential drawbacks, as well as benefits, have been analysed, with their feasibility compared to newer, recently emerging catalysts. The field of heterogeneous catalysis for fine chemical production is a dynamic and ever-changing area of research. This deeper insight into catalytic behaviour and material properties will produce more efficient, selective, and sustainable processes in the fine chemical industry. The findings from this article will provide an excellent foundation for further exploration and a critical review in this field of fine chemical production using micro- and mesoporous heterogeneous catalysts.

Little is known about public knowledge of meat chicken production and how it influences attitudes to birds’ welfare and consumer behaviour. We interviewed 506 members of the public in SE Queensland, Australia, to investigate this. Knowledge was assessed from 15 questions, and low scores were supported by respondents’ self-assessed report of low knowledge levels and agreement that their knowledge was insufficient to form an opinion about which chicken products to purchase. Older respondents and single people without children were most knowledgeable. There was uncertainty about whether chicken welfare was adequate, particularly in those with little knowledge. There was also evidence that lack of empathy towards chickens related to lack of knowledge, since those that thought it very acceptable that some birds are inadequately stunned at slaughter had low knowledge scores. More knowledgeable respondents ate chicken more frequently and were less likely to buy products with accredited labelling. Approximately half of the respondents thought the welfare of the chicken to be more important than the cost. It is concluded that the public’s knowledge has an important connection to their attitudes and consumption of meat chickens. Respondents with little knowledge demonstrated that they had both lack of empathy and intolerance to religious slaughter practices.

Hox gene clusters are crucial in Embryogenesis. It was observed that some Hox genes are located in order along the telomeric to centromeric direction of the DNA sequence: Hox1, Hox2, Hox3…. These genes are expressed in the same order in the ontogenetic units of the Drosophila embryo along the Anterior-Posterior axis. The two entities (genome and embryo) differ significantly in linear size and in-between distance. This strange phenomenon was named Spatial Collinearity (SP). Later, it was observed that, particularly in the Vertebrates, a Temporal Collinearity (TC) coexists: first is Hox1 expressed, later Hox2 and even later Hox3,…,. According to a Biophysical Model (BM), pulling forces act at the anterior end of the cluster while a cluster fastening applies at the posterior end. Hox clusters are irreversibly elongated along the force direction. During Evolution, the elongated Hox clusters are broken at variable lengths thus split clusters may be created. An Empirical Rule was formulated distinguishing development due to a complete Hox cluster from development due to split Hox clusters. BM can ‘explain’ this Empirical Rule. In a spontaneous mutation where the cluster fastening is dismantled, a weak pulling force automatically shifts the cluster inside the Hox activation domain. This cluster translocation can probably explain the absence of Temporal Collinearity in Drosophila.

The potential of Thai industrial product design is still inferior to those of leading competitors in world market that give more importance on the design during their product development to increase their competitive edges on commercial scale. The product design is very important part for sustainable growth in this industry. Thus, this research aims at investigating footwear design strategies for Thai footwear industry to be excellence in world market. The research has been designed with the mixed method of both qualitative and quantitative study. The quantitative data were collected through semi-structure interview from 500 designers who presented their designs to join the award competition. The results revealed that the footwear design strategies consisted of 4 factors, i.e. 1) design, 2) market analysis, 3) innovation, and 4) information technology. This paper utilizes the method of Structural Equation Modeling (SEM) to establish a strategies model for competitive advantage in Thai footwear industry. The analysis results indicated that the footwear design strategies model could help make more effective policies and organization strategies for enterprises and designers to develop themselves to be excellence in world market.

Rising sensitivity of the loads with respect to power quality has grown-up the consideration of power system study and power quality enhancement systems. The fluctuation of voltage outside the normal working range due to faults may lead to unsuitable interruption of wind turbines. This thesis present 1.5MW grid connected Adama Ⅰ Wind Farm in Ethiopia with the objectives to capture the optimal power from the wind and ensure voltage source for sensitive load. This paper deals with the effective voltage sag mitigation and Harmonic distortion effectively met IEEE 519-1992 standard under all Phase to ground fault compensation by using Dynamic Voltage Restorer (DVR), to regulate the terminal voltage of the wind farm and safe operation of sensitive load. The DVR utilizes a feed forward control-based algorithm to generate PWM. The simulation results are going to be carried out by MATLAB-Simulink to verify the operation and effectiveness of DVR during balanced voltage sag and swell conditions.

Antioxidant, anti-inflammatory and chemo-preventive features have been reported for the carotenoid diatoxanthin. Diatoxanthin is only produced by a few groups of microalgae where it functions in photoprotection. Its large-scale production in microalgae is currently not feasible. In fact, rapid conversion into the inactive pigment diadinoxanthin is triggered when the cells are removed from the high-intensity light source, which will be the case during large-scale harvesting of microalgae biomass. Zeaxanthin epoxidase (ZEP) 2 and/or ZEP3 have been suggested to be responsible for the back-conversion of high-light accumulated diatoxanthin to diadinoxanthin in low light in diatoms. Using the CRISPR/Cas9 gene editing technology we knocked out the ZEP2 and ZEP3 genes in the already commercially used marine diatom Phaeodactylum tricornutum to investigate their role in the diadinoxanthin-diatoxanthin cycle, and to determine if one of the mutant strains could function as a diatoxanthin production line. Light shift experiments proved that ZEP3 encodes the enzyme converting diatoxanthin to diadinoxanthin in low light. Loss of ZEP3 caused the high-light accumulated diatoxanthin to be stable for several hours after the cultures had been returned to low light, suggesting that zep3 mutant strains could be suitable as commercial production lines of diatoxanthin.

A proposed animal welfare assessment protocol for semi-arid rangeland-based cow-calf systems in Namibia combined 40 measures from a protocol developed for beef cattle in New Zealand with additional Namibia-specific measures. Preliminary validation of the protocol had been undertaken with five herds in one semi-commercial village. The aim of the current study was to apply this protocol and compare animal welfare across three cow-calf production systems in Namibia. A total of 2529 beef cows were evaluated during pregnancy testing in the yards of 17 commercial, 20 semi-commercial and 18 communal (total: 55) herds followed by an assessment of farm resources and a questionnaire-guided interview. Non-parametric tests were used to evaluate the difference in the welfare scores between the production systems. The results indicated a discrepancy of animal welfare between the three farm types, with a marked separation of commercial farms from semi-commercial, and communal village farms in the least. The differences in these production systems was mainly driven by economic gains through access to better beef export market for commercial farms and semi-commercial villages, as well as by the differences in the available grazing land, facility designs/quality and traditional customs in the village systems. The results indicate an advantage of commercialisation over communalisation.

Ciherang rice variety was released in year 2000 and become a superior variety in Indonesia. In a decade, due to the excellent agronomic characteristics and high productivity, Ciherang gradually replace the mega-variety IR-64 and widely cultivate in almost 40% rice production area in Indonesia. In addition to its high grain yield, short straw, early maturity, and high productive tiller number, it had superior grain quality, such as long and slender grain shape, clean yellow color, aromatic, and high milled rice percentage with excellent eating quality, matching with farmers and rice consumers demands. It has intermediate glycemic index and delicious taste. It is intolerance to flooding condition and susceptible to several diseases and pests, including rice blast, bacterial blight, brown planthopper, and yellow stem borer. Because of Ciherang has been well-characterized genetically, many quantitative trait loci (QTLs) and candidate genes which associated with certain traits have been identified. It has also been used as a parent in rice breeding program to develop mapping populations for genetic analysis. In order to increase the flooding tolerant and disease resistant in Ciherang, many valuable genes have been introduced into Ciherang through backcrossing breeding technique and transgenic approach. The optimal rice productivity in Ciherang also supported by the application of intensification system in Ciherang cultivation. Unravelling the complex genetic control of agronomic characteristics, grain yield traits, and other desirable traits which valuable for rice farmers and consumers are very important.

This study focuses on solving rural problems, sustaining environmental conditions, pastures improvement, and reduction of CO2 concentration, suggesting inoculated vegetation types found in the tropics as a nature-based solution for degraded agroecosystems. Noninoculated plants are intensively used for revegetation of degraded and mined lands, AMF taxonomic and plant-fungal ecological studies. Among those grasses, Urochloa brizantha is a tropical forage, having vigorous deep roots, commonly used for arbuscular mycorrhizae (AMF) multiplication in glasshouse and nursery, developing infective propagules to be conserved in germplasm banks. Other grass species, such as Urochloa decumbens, is also used for arbuscular mycorrhizal multiplication in addition to its cultivation for guaranteeing the sustainable of livestock systems. In the present study, a site of 100 m2 was selected to take soil samples in a plain area, with U. brizantha pasture, and the soil chemical characterization, microcharcoal content and AMF spore identification, were evaluated 3+6showing high amount of potassium (K), high microcharcoal content and the occurrence of 11.32 spores of AMF, most of Glomeraceae, in the rhizosphere of U. brizantha. Due to its economic importance for sustainable agricultural production and other uses besides its environmental services, as important promoters of soil carbon on grazing lands, more detailed research is needed on the biotic interactions and inoculant production in of the studied grasses.

The satellite Earth observation (EO) sector is burgeoning with hundreds of commercial satellites being launched each year, delivering a rich source of data that could be exploited for societal benefit. Data streams from the growing constellation of commercial satellites are of variable quality, limiting the potential for their combined use in science applications that need long time-series data from multiple sources. The quality of calibration performed on optical sensors onboard many satellite systems is highly variable due to calibration methods, sensor design, mission objective, budget, or other operational constraints. A small number of currently operating well-characterised satellite systems with onboard calibration, such as Landsat-8/9, Sentinel-2, and planned future missions like the NASA Climate Absolute Radiance and Refractivity Observatory (CLARREO) Pathfinder, the European Space Agency (ESA) Traceable Radiometry Underpinning Terrestrial and Helio Studies (TRUTHS), and LIBRA from China, are considered benchmarks for optical data quality due to their traceability to international measurement standards. This paper describes the concept of a space-based transfer calibration radiometer called the Satellite Cross-Calibration Radiometer (SCR) that would enable the calibration parameters from satellites such as Landsat-8/9, Sentinel-2, or other benchmark systems to be transferred to a range of commercial optical EO satellite systems while in orbit. A description of the key characteristics of the SCR to successfully operate in orbit and transfer calibration from Reference systems to Client systems is presented. A system like the SCR in orbit could complement SI-Traceable satellites (SITSats) to improve data quality and consistency and facilitate the interoperable use of data from multiple optical sensor systems for delivering higher returns on the global investment in EO.

The response of a single tin oxide nanowire was collected at different temperatures to create a virtual array of sensors working as a nano-electronic nose. The single nanowire, acting as a chemiresistor, was first tested with pure ammonia and then used to determine the freshness status of trout fish (Oncorhynchus mykiss) in a rapid and non-invasive way. The gas sensor reacts to total volatile basic nitrogen, detecting the freshness status of the fish samples in less than 30 seconds. The sensor response at different temperatures correlates well with the total viable count (TVC), demonstrating that it is a good (albeit indirect) way of measuring the bacterial population in the sample. The nano-electronic nose is able to classify the samples according to their degree of freshness, but also to quantitatively estimate the concentration of microorganisms present. The system was tested with samples stored at different temperatures, managing to classify them perfectly (100%) and estimating their log(TVC) with an error lower than 5%.

The accumulation of brown algae from the genus Sargassum has been increasing over the years in coastal regions of the Caribbean, Africa, Brazil, and Mexico. This causes harmful effects to the ecosystem, health, economy, and climate due to gas emissions from its decomposition process. There is the possibility of this biomass being reused in civil construction, and few studies have been carried out on its application to common Portland cement mortar. As such, the objective of this study is to evaluate the potential of sargassum ash as a mineral addition to partial replacement of fine aggregates in Portland cement mortar. Characterizations of the raw materials were carried out through X-ray fluorescence spectroscopy, loss on ignition, particle size distribution, Brunauer–Emmett–Teller (BET), real density, X-ray diffraction, scanning electron microscopy, and dispersion spectroscopy of electrons. The mortars were prepared by partially replacing the fine aggregate (sand) with sargassum ash, at 0%, 5%, 10% and 20%. Mortar performance was evaluated through water absorption, apparent porosity, apparent specific mass, compressive strength after 7, 28, and 63 days after curing. Lastly, a life cycle assessment in accordance with ISO standards 14040:2006 and 14044:2006. The results showed that replacing sand with sargassum ash increases water absorption, apparent porosity, and decreases the apparent specific mass and compressive strength as replacement increases. Nevertheless, the compressive strength results after 63 days, for 5 and 10% replacement did not differ statistically from reference values. The life cycle assessment indicates that mortars with partial replacement of sand by sargassum ash showed positive environmental impacts when compared to reference values for most categories regardless of the scenario analyzed, especially for mortar with 10% replacement. As such, the use of sargassum ash at 10% does not alter compressive strength values after 63 days while reducing its environmental impact. The application of this biomass in civil construction materials provides a destination for this algae that has been causing several social, environmental, and economic problems.

Hydrogen has a leading role in accomplishing a net zero green-house gas emission future. Today’s challenge is producing green hydrogen to cover the fuel demand of transportation and industry, to gain independence from fossil fuels. This review’s goal is to demonstrate critically the existing methods of biomass treatment and assess their ability to scale up. Biomass is an excellent hydrogen carrier and biomass-derived processes are the main target for hydrogen production as it is an innovative pathway to green hydrogen production. Comparing the existing processes, thermochemical treatment is found to be far more evolved than biological or electrochemical treatment especially with regard to scaling prospects.

The term Conjugated Linoleic Acid (CLA) refers generically to a class of positional and geometric conjugated dienoic isomers of linoleic acid. Among the isomers of linoleic acid cis9, trans11-CLA (c9, t11-CLA) and trans10, cis12-CLA (t10, c12-CLA) are found to be bio-logically active isomers, and they occur naturally in milk, dairy products and meat from ruminants. In addition, some vegetables and some sea-foods have also been reported to contain CLA. Although the CLA levels in these natural sources are insufficient to confer the essential health benefits, anti-carcinogenic or anti-cancer effects are of current interest. In the rumen, CLA is an intermediate of isomerization and the biohydrogenation process of linoleic acid to stearic acid conducted by ruminal microorganisms. In addition to rumen bacteria, some other bacteria, such as Propionibacterium, Bifidobacterium and some lactic acid bacteria (LAB) are also capable of producing CLA. In this regard, Lactiplantibacillus plantarum (formerly Lactobacillus plantarum) has demon-strated the ability to produce CLA isomers from linoleic acid by multiple enzymatic activi-ties, including hydration, dehydration, and isomerization. L. plantarum is one of the most versatile species of LAB and the bacterium is widely used in the food industry as a micro-bial food culture. The studies reviewed in this article reveal how, in the production of some fermented foods, the use of appropriate strains of L. plantarum, as a starter or additional culture, can be considered a critical factor in the design of new CLA-enriched functional foods.

With the emergence of blockchain and smart contracts, traditional digital applications 1 such as identity management, supply chain management, banking and finance etc. are expected 2 to be transformed into Decentralized Applications (DApps). Blockchain interoperability is a new 3 and exciting aspect of blockchain technology that is quickly gaining popularity in many industries. 4 However, the widespread use of blockchains has not yet been achieved because DApps running on the 5 blockchain using smart contracts require access to authentic off-chain data. Users are more conscious 6 of their personal data privacy and consequently are more reluctant to share their data, posing a 7 challenge in the adoption of DApps. To solve this challenge, we present a novel quantum-resistant, 8 data authentication and zero-knowledge proof scheme named zk-DASTARK. Based on our proposed 9 scheme, we present a novel framework which can be used to feed authenticated off-chain data to 10 DApps without compromising user data privacy. Our proposed framework is quite efficient against 11 well-known off-chain data authentication frameworks. The proposed framework is implemented on 12 state-of-the-art quantum-resistant IOTA Blockchain and is highly efficient as it takes approximately 13 60 ms to generate a proof and approximately 10 ms to verify a proof.

Sensor enabled big data and Artificial Intelligence platforms has the potential to address global socio-economic trends related to the livestock production sector through advances in the digitization of precision livestock farming. The increased interest in animal welfare, the likely reduction in the number of animals in relation to population growth in the coming decade and the growing demand for animal proteins pose an acute challenge to prioritizing animal welfare on the one hand while maximizing the efficiency of production systems on the other. To stimulate a sustainable, digital, and resilient recovery of the agricultural and livestock industrial sector, there is an urgent need for testing and develop new ideas and products such as wearable sensors. By validating and demonstrating a fully functional wearable sensor prototype within an operational environment on the livestock farm that includes a miniaturized animal-borne biosensor and an artificial intelligence (AI) based data acquisition and processing platform, the unmet current needs can be fulfilled. The expected quantifiable results from wearable biosensors will demonstrate that the digitization technology can perform acceptably within the performance parameters specified by the agricultural sector and under operational conditions, to measurably improve livestock productivity and health. There is a need for a multimodal, digitized, automated biosensor and health monitoring platform containing AI algorithms for optimized stress and disease prediction in farm animals. An experimental development of non-invasive wearable and wireless physiological sensor networks that can be deployed in agricultural environments would allow for real-time extraction and integration of physiological data and display on decision support dashboards for livestock workers. By testing the effectiveness of the system in generating meaningful longitudinal data for further research into physiological and behavioral characteristics of farm animals, novel insights about animal welfare can be developed. The successful implementation of the digital wearable sensor networks would provide actionable real-time information on animal health status and can be deployed directly on the livestock farm, which will strengthen the green and digital recovery of the economy due to the significant innovation potential. Continuous monitoring of animal health and physiological functioning promotes more environmentally and socially acceptable developmental pathways. Once demonstrated, the portable animal health monitoring platform will close a critical gap in digitized livestock farming and position the agricultural industry as a frontrunner in the sector of farm animal monitoring and measurement systems. The multimodal wearable sensor-driven AI approach is expected to significantly improve the effectiveness of livestock decision support systems and the selection of resilient animals for the next generation and provide predictive data for end-users in livestock farming.

This manuscript presented an autonomous home farm for predicting metrological characteristics that can not only automate the process of growing crops but also, due to a neural network, significantly increase the productivity of the farm. The developed farm monitors and manages the following indicators: illumination, soil PH, air temperature, earth temperature, air humidity, CO2 concentration, and soil moisture. The presented farm can also be considered as a device for testing various weather conditions to determine the optimal temperature characteristics for different crops. This farm as a result is completely autonomous grows tomatoes at home.

Electricity demand forecasting plays a significant role in energy markets. Accurate prediction of electricity demand is the key factor to optimize power generation, consumption, saving energy resources, and determining the energy prices. However, integrating energy mix scenarios, including solar and wind power which are highly non-linear and seasonal, into an existing grid increases uncertainty in generation, adds the challenges for precise forecast. To tackle these challenges, state-of-the-art methods and algorithms have been implemented in literature. We have developed Artificial Intelligence (AI) based deep learning models that can effectively handle the information of long time-series data. Based on the pattern of dataset, four different scenarios were developed and two best scenarios were selected for prediction. Dozens of models were developed and tested in deep AI networks. In the first scenario (Scenario1), data for weekdays excluding holidays was taken and in the second scenario (Scenario2) all the data in the basket was taken. Remaining two scenarios, weekends and holidays were tested and neglected because of their high prediction error. To find the optimal configuration, models were trained and tested within a large space of alternatives called hyper-parameters. In this study, an Aritificial Neural Network (ANN) based Feed-forward Neural Network (FNN) showed the minimum prediction error for Scenario1 while a Recurrent Neural Network (RNN) based Gated Recurrent Network (GRU) showed the minimum prediction error for Scenario2. While comparing the accuracy, the lowest MAPE of 2.47% was obtained from FNN for Scenario1. When evaluating the same testing dataset (non-holidays) of Scenario2, the RNN-GRU model achieved the lowest MAPE of 2.71%. Therefore, we can conclude that grouping of weekdays as Senario1 prepared by excluding the holidays provides better forecasting accuracy compared to the single group approach used in Scenario2, where all the dataset is considered together. However, Scenario2 is equally important to predict the demand for weekends and holidays.

Working capital management requires a careful attention by the corporate managers because it plays an important role in corporate stability. Social belongingness of managers induced them to learn from their society, colleagues and from overall industrial movement. They also learn from their peers which have more strategical efficiency. In line with these arguments, the objective of current study is to explores the peer influence on corporate working capital management practices. To making analysis, ten-years data (2009-2018) of non-financial publicly listed firms at PSX were collected and the cash conversion cycle (CCC) uses as a proxy variable of working capital management (WCM). To estimate the regression, an econometric technique named the Generalized Method of Moments (GMM) was used. The empirical findings suggest the significant impact of peer WCM on corporate WCM. It also suggests the significant impact of other variables that determine the WCM. This study recommends social learning policy to corporate managers. They can learn from their peers to manage the working capital. Most previous studies discuss the peer influence on investment decisions, corporate cash holding and financing policy, etc., but no study explores such a relationship specifically in the Pakistani non-financial sector data set.

This study was aimed to investigate the effect of capital structure on firms’ profitability with special emphasis on Ethiopian Large Private Manufacturing Firms using panel data of five consecutive years (2006/07-2010/11G.C). The secondary data sources (audited financial statements) have been collected from the randomly selected thirty three large private manufacturing firms in Ethiopia. Linear regression model has been employed to analyze the relationship between firms’ profitability and capital structure. Specifically, Random-effect Generalized Least Square of panel data regression model has been selected to empirically test the literature driven hypotheses. Finally, the findings of this study revealed that a significant positive relationship between firms’ profitability and total debt ratio which indicate firm’s capital structure.

(1) Background: Metabolic syndrome is a strong predictor of cardiovascular disease thus the objective of the study was to verify the prevalence of metabolic syndrome in farmers, as well as to verify the association with sociodemographic, work and lifestyle factors. (2) Methods: Cross-sectional, observational study, carried out with 790 individuals. For the diagnosis of metabolic syndrome, the National Cholesterol Education Program's Adult Treatment Panel III (NCEP-ATP III) and International Diabetes Federation (IDF) criteria were used. Pearson's chi-square test and binary logistic regression were used to verify factors associated with metabolic syndrome (3) Results: The prevalence of MS according to the IDF criteria was 16.3% overall, with 9.7% of women (95% CI: 6.66–16.16) and 6.6% of men (95% CI: 5.17–11.97). According to the NCEP/ATP III criterion, it was 12.3% overall, with 7.5% corresponding to women (95% CI: 6.62 – 13.13) and 4.8% to men (95% CI: 3.5 – 8.70). With regard to the conditions that make up metabolic syndrome, it was found that high density lipoprotein, high blood pressure and high waist circumference were the most prevalent. (4) Conclusions: The prevalence of metabolic syndrome is considerable in the population when compared to other regions, both rural and urban, in Brazil.

This study assesses the pursued impacts of Tulsi value chain development intervention on the livelihoods of rural poor in Uttarakhand state of India. Tulsi as an alternative livelihood, particularly for the rural poor, is less explored. With increased crop depredation of major cereal crops grown in the district by wild animals and pests, and decreasing availability of water agriculture, attempts were made to improve earnings from Tulsi as an alternative livelihood. Findings suggest that the average households’ gross profit from Tulsi farming increases by more than double within a span of two years. Total crop income of beneficiary farmers’ increases by 0.8 percent for every 1 percent increase in Tulsi income. Intervention helped enhance productivity of Tulsi, thereby enhancing earnings from Tulsi farming. Most importantly, intervention has shown a tremendous adoption rate. Towards the end of the intervention, the value chain work was out-scaled to another 19 villages in Chamoli district, thereby reaching out to more than 400 households.

This study finds that in northern Jordan, breeder indicators present challenges to the sustainability and growth of sheep and goat farming, while economic indicators suggest a combination of financial stability alongside hurdles related to profitability and resource ownership. Breeder age plays a role in the management of livestock herds, due to factors such as experience, resources, or adherence to traditional practices. Experience significantly affects breeders' decisions on male insemination replacements, likely due to skill. Crop cultivation influences breeders' returns by reducing feeding costs, while strategic lamb sales management boosts individual animal profitability. Winter raises animal mortality due to cold stress. Other animals in herds increase kid mortality by spreading diseases. Breeder experience significantly affects lamb survival, stressing its role in care. Increasing sheep proportion enhances lamb production and reduces lamb mortality while managing rams and selling lambs positively affects herd health and productivity. A larger goat herd proportion positively correlates with kids sold but inversely with breeding males and overall kids, implying trade-offs affecting herd productivity and mortality rates. Sheep herds (92.5%) show slightly better reproductive success than goats (90.6%), implying superior long-term viability. Flock excels in birth, survival, and sales, but low sheep and lamb%. Improvement is needed for sustainability, and the potential is high. Goat breeding shines in birth, sales, and overall success, but needs attention to kid survival and other sustainability issues. In conclusion, despite challenges, there are promising opportunities to enhance sheep and goat farming in Jordan. Effective management, informed by breeders' experience and economics, is crucial. Empowering small-scale herders and implementing targeted interventions like winter mortality solutions and selective breeding is vital for sustainable growth.

Interpretation of increased gain in the bovine animals is difficult to be validated due to inherent genetic variation to meet their requirement for energy and protein, and those may relate to the bull species, e.g., Thai swamp buffalo. Therein, the study aimed at investigating and predicting protein requirement systems, with providing abundant energy intake 2.20 Mcal/kg DM for maintenance and growth of Thai swamp buffaloes using the comparative prolonged feeding trial for 90 days. Sixteen bull Thai swamp buffaloes at the initial (Age: 18-24 months; BW: 233 ± 25.0 kg) were as-signed into four treatment groups, four buffaloes each, fed 5.42, 6.96, 8.94, and 10.71% DM crude protein (CP). CP intake, BW, and physiological fluid were determined. The net CP requirements for maintenance and growth of Thai swamp buffaloes were 5.41 g CP/kg W0.75 and 0.46 g CP/g average daily gain (ADG), respectively. Our results indicated that CP requirement increases, when BW increases. An increased dietary CP resulted in an increased number at blood urine nitrogen (N), N absorption, total volatile fatty acid, urinary purine derivative, and the microbial N. Notably, the net CP requirement for growth of Thai swamp buffalo was higher than it reported in NRC, but the maintenance was lower.

Over the past decade, Thailand has experienced a rapid increase in its elderly population. Many unfavorable health outcomes among elderly people are associated with nutrition. Nutrition in elderly people is affected by physical, mental, and social factors. This study explored the food choices and dietary practices among community-dwelling elderly people in Thailand from the perspective of both caregivers and the elderly people themselves. Six focus group discussions and six semi-structured interviews were conducted in the Samut Sakhon Province of Thailand. A combination of deductive and inductive thematic analyses was adopted, and the results show that physical and mental factors and societal factors are important determinants of food choices. Moreover, a changing food environment and economic factors were found to affect food choices. Issues of trust in food safety and food markets were highlighted as growing issues. Therefore, fostering healthy food choice interventions that consider both environmental and societal aspects is necessary.

Cyanobacteria are promising organisms for the sustainable production of various biotechnologi-cal interesting products. Due to their energy production via photosynthesis, the cultivation of cyanobacteria expands the CO2 cycle. Most cyanobacteria form biofilms on surfaces in their natu-ral environment by surrounding the cells with a self-produced matrix of extracellular polymeric substances (EPS) that hold the cells together. These special growth properties need special reac-tors for cultivation. By immobilizing cyanobacteria on carriers, systems currently established in industry could also be used for biofilm formers. Various artificial carriers for immobilized growth of cyanobacteria and microalgae have already been described in the literature. However, the use of waste materials or natural biodegradable carriers would be more sustainable and is, therefore, the focus of this study. Dried Luffa cylindrica, zeolite, and corn stalks were investigated for their use as carriers for cyanobacteria. L. cylindrica was shown to be an excellent natural carrier for (i) Anabaena cylindrica (ii) Nostoc muscorum 1453-12a, and (III) Nostoc muscorum 1453-12b. Higher or at least similar growth rates were achieved when cyanobacteria were cultivated with L. cylindrica compared to submerged cultivation. Additionally, the production of EPS and C-phycocyanin was increased at least 1.4-fold in all strains by culturing on L. cylindrica. The improved growth could be explained on the one hand by the high surface area of L. cylindrica and its properties, and on the other hand by the release of growth-promoting nutrients from L. cylindrica to the medium.

Although jojoba (Simmondsia chinensis) has been cultivated for years, information on its N re-quirements is limited. A 6-year study of mature jojoba plants grown under field conditions with an intensive management regime evaluated the effect of N-application rate on plant nutrient status, growth and productivity, and nitrate accumulation in the soil. Five levels of N application were tested: 50, 150, 250, 370 and 500 kg N ha-1. The fertilizers were provided all along the growing season via subsurface drip irrigation system. Leaf N concentration, in both spring and summer, reflected the level of N applied. Diagnostic leaf (youngest leaf that has reached full size) concentration of 1.3% N was identified as the threshold for N deficiency. Increasing rates of N application resulted in higher P levels in young leaves. Plant K status, as reflected by leaf analysis, was not affected by N treatment but was strongly affected by fruit load. Vegetative growth was inhibited when only 50 kg N ha-1 was applied. Soil analysis at the end of the fertilization season showed substantial accumulation of nitrate for the two highest application rates. Considering productivity, N costs, and environmental risk, 150 kg N ha-1 is the recommended dosage for in-tensively grown jojoba. N deficiencies can be identified using leaf analysis and excess N can be detected by soil sampling toward the end of the growing season. These results and tools will fa-cilitate precise N fertilization in intensive jojoba plantations.

InGaN/GaN samples grown on c-plane sapphire substrate with different In concentrations by metal organic chemical vapor deposition are demonstrated. The subsequent capping GaN layer growth opens a possibility for dislocation reduction due to the lateral strain relaxation in growth geometry. We present the further growth optimization and innovative characterization of InGaN layers overgrown on different structures with varying In concentrations. The photoelectrical and optical properties of the InGaN layers with or without capping GaN layer were investigated by time-resolved picosecond transient grating and temperature dependence photoluminescence. We note a 10-fold increase in carrier lifetime in the InGaN layers when the sample structure changes from PIN to single InGaN layer.

The high-quality development of urban-rural integration is a vital component of China's economy, serving as a strategic response to the in-depth deployment of new urbanization and rural revitalization strategies. This integration is underscored by the promotion of entrepreneurship in agriculture, rural areas, and among farmers, which acts as a driver for fostering high-quality development in urban-rural areas through market competition. The resulting influx of resources and commodities with similar characteristics plays a crucial role in bridging the urban-rural divide. To maintain objectivity, it is important to adopt a balanced approach and refrain from using biased language. This study delves into the connotation and internal mechanism of the high-quality development of urban-rural integration, centering on the principle of 'quality'. Specifically, it examines the role of entrepreneurship in agriculture, rural areas, and among farmers, and evaluates its direct impact and transmission mechanism. The research employs balanced panel data from 41 cities in the Yangtze River Delta region spanning from 2003 to 2021. The findings reveal that entrepreneurship in agriculture, rural areas, and among farmers serves as a catalyst for promoting high-quality urban-rural development through the construction of a virtuous cycle, whereby resource factors and commodity services are exchanged. Moreover, this deep integration yields diverse effects across economic, spatial, demographic, social, and ecological domains, underscoring the necessity of continued support for entrepreneurship in agriculture, rural areas, and among farmers to facilitate a seamless urban-rural economic cycle and fully realize the benefits of high-quality development.

Corporate governance is widely suggested by economists and regulators as a solution to reduce agency problems and improve firm performance. However previous studies have failed to generate consistent results. Using a dynamic panel system GMM estimator to alleviate endogeneity concerns we determine the effect of corporate board structure on the performance of a panel of 1265 Chinese firms listed on the Shanghai and Shenzhen stock exchanges from 2010 to 2016. We compare the dynamic system GMM estimator to some commonly used estimators; ordinary least squares (OLS), fixed effects (FE) and the dynamic OLS, and show that these estimates are biased due to endogeneity. The dynamic system GMM estimator incorporates the dynamic nature of internal governance choices to provide valid and powerful instruments that address unobserved heterogeneity and simultaneity. Our results show support for the board model corporate governance mechanism. We find that board size is positive and significantly related to both return on assets and total net profit margin. In addition board independence is positive and significantly related to return on assets but insignificantly related to total net profit margin. Duality was found to have a negative but statistically insignificant relation with firm performance.

As a combination of both concepts of innovation and environmental development, green innovation is of great significance to the sustainable development of the country and industry. Previous literatures have found the separate roles of green entrepreneurial orientation and inter-organizational learning in understanding green innovation issues. However, few studies have done a comprehensive analysis of integrating three streams of research: green entrepreneurial orientation, green innovation and supply chain learning capability. Based on the resource-based view and dynamic capability theory, we examine the direct of green entrepreneurial orientation on green innovation as well as indirect effect through the mediation of supply chain learning capability. Meanwhile, an empirical data set of 228 manufacturing companies in China (Shaanxi, Guangdong, Hebei, Jiangsu, and Shandong) was used to test our hypotheses. Findings from our empirical study suggest that supply chain learning capability partially mediates the positive relationships between green entrepreneurial orientation and its two consequences—green incremental innovation and green radical innovation. In addition, this research implies that when enterprise has a strong green entrepreneurial orientation, the enterprise should make an effort to enhance the level of supply chain learning capability so as to fully develop their green innovation.

The relationship between perception of anxiety and quality of life in caregivers of children with autism was verified. To verify quality of life, the Short Form Healthy Survey Item was used; perception of anxiety was assessed using the Beck Anxiety Inventory. 80 caregivers of children with autism participated, with 68.7% of caregivers being mothers. Of the total number of caregivers, 68.8% had a severe level of anxiety. Regarding quality of life, they demonstrated greater impairment in Limitation due to physical aspects, Limitation due to emotional aspects, Vitality and Pain. Caregivers with severe anxiety levels had worse quality of life in the domains of pain (p = 0.012), social aspects (p =&lt; 0.001), limitation due to emotional aspects (p = 0.001) and mental health (p =&lt; 0.001). However, in the functional capacity domain, caregivers with a moderate level of anxiety had a better physical capacity score (p = 0.001). There was a negative correlation between the general anxiety score and the general physical (p = 0.029) and general emotional component of quality of life (p =&lt; 0.001). It was found that caregivers of children with ASD present losses related to psychological factors, quality of life and the lack of social support.

Abstract Introduction: Poor structural quality of health facilities for tuberculosis (TB) diagnosis and treatment contributes to unfavorable health outcomes among TB patients. Improving the quality of healthcare services helps to avert TB-related morbidity. Despite these facts, the level of structural quality of health facilitieSs to deliver TB services is not in line with what the national TB and leprosy program (NTLP) recommends. Hence, the present study was conducted to assess the structural quality of health facilities to deliver quality TB services to TB patients among public health facilities in the Sidama region.Objectives: To determine the quality of the structural domain of TB services at public health facilities in the Sidama region of southern Ethiopia.Methods: An institution-based cross-sectional study was conducted from June to July 2023 among randomly selected public health facilities in the Sidama region. We included 40 randomly selected public health facilities that delivered TB services in the study area. Data was collected by experienced data collectors using facility audits, clinical observation checklists, structured questionnaires, and in-depth interviews. An Open Kit Mobile (ODK) application was used to collect data and exported to SPSS version 26. All statistical analysis was done using SPSS version 26.Results: The overall mean quality score for the structural dimension was 50.25 among the 40 health facilities audited in the study area.Conclusion: The quality of TB services regarding structural dimensions was poor in the study area. Therefore, any strategies must give careful attention to increasing the comprehensive structural dimension of quality TB services.

The field of CSR has witnessed considerable growth and established itself as a significant subject in family business literature. However, despite previous reviews exploring this topic from various angles, there remains a crucial gap in understanding the influence of diverse regulatory frameworks and cultural values on the development of literature production and research streams across different regions. This gap holds particular significance for comprehending the latest advancements in this dynamic field, particularly in emerging economies, where cultural norms play a substantial role in shaping the relationship between family firms and CSR. To bridge this gap, this paper conducts a comprehensive review of empirical studies focusing on sustainability in family firms. These studies are organized based on the country of study, and our review encompasses 232 articles published between 1996 and 2023. Utilizing bibliometric software, we systematically group these articles into three distinct clusters: North American studies, European studies, and Asian studies, adhering strictly to our inclusion criteria.

The move to a low carbon economy is very important for enhancing international competitiveness. The eco-innovation is the critical factor of the green paradigm. This study is designed to investigate deeply the determinants of eco-innovation of manufacturing firms in Korea by suggesting anticipated regulations, self-regulations, and industry-specific characteristics as external factors and open information sources as internal factors. The data used in the analysis is 1946 sample firms from Korean Innovation Survey 2010 based on the Oslo Manual. Using the multi-variate probit analysis and the zero-inflated negative binomial (ZINB) regression analysis, we have found out that the anticipated regulations and self-regulations have significant influences both on eco-process innovation and eco-product innovation, while industrial characteristics have no effects. The empirical results also show that the breadth of information sources has a positive effect on businesses in implementing eco-innovations. Our findings show that the Korean government should provide a good platform where firms can better understand the future trends of environmental policies, particularly policies on anticipated and self-regulations. At the same time, Korean firms should establish a voluntary system to control environmental activities so that they can improve eco-innovations through integrating external information.

The search of DNA polymorphisms useful for the genetic improvement of dairy farm animals lasts more than 40 years with relevant findings in cattle for milk traits, where the best combination of alleles for dairy processing have been found in casein genes and in the DGAT1. Nowadays, similar results are not reached yet in river buffaloes despite advanced genomic technologies and accurate phenotype records are available. The aim of the present study was to investigate and validate in a larger buffalo population the effect on six milk traits of four single nucleotide polymorphisms (SNP) in the CSN1S1, CSN3, SCD and LPL genes, previously reported to be associated with or affect dairy traits in smaller populations often belonging to one farm. A total of 800 buffaloes were genotyped. Daily milk yield (dMY, kg), protein yield (dPY, kg) and fat yields (dFY, kg), fat and protein contents (dFP, % and dPP, %), somatic cell count (SCC, 103cell/ml) and urea (mg/dl) were individually recorded in each month for the whole lactation from 2010 to 2021. A total of 15,742 individual milk test day records (2,496 lactations) were available on 680 buffalo cows with 3.6±1.7 parity (from 1 to 13) and 6.1±1.2 test day records per lactation on average. Three out four SNP in CSN1S1, CSN3 and LPL were associated with at least one of analyzed traits. In particular, the CSN1S1 (AJ005430:c.578C&gt;T) gave favorable associations with all yield traits (dMY, p=0.022; dPY, p=0.014 ; dFY, p=0.029) and SCS (p=0.032), whereas the CSN3 (HQ677596: c.536C&gt;T) positively associated with SCS (p=0.005) and milk urea (p=0.04). Favorable effect on dMY (p=0.028), dFP (p=0.027) and dPP (p=0.050) were observed for the LPL. Conversely, SCD did not show any association with milk traits. This is the first example of confirmation study carried out in the Mediterranean river buffalo for genes of economic interest in dairy field and it represents a very important indication for the preselection of young bulls destined to breeding programs in the view of a more sustainable dairy production.

The purpose of this work is to define optimal growth conditions for batch culture of the cyanobacterium Arthrospira maxima and the microalgae Chlorella vulgaris, Isochrysis galbana and Nannochloropsis gaditana. Thus, we study the effect of three variables on algae growth: i.e., inoculum:culture medium ratio, light:darkness photoperiod and type of culture medium, including both synthetic media and wastewaters. The results showed that the initial inoculum volume did not affect the amount of biomass at the end of the growth (14 days), whereas an excess (18 h) or defect (6 h) in the number of hours of light is determinant for its development. The contribution of nutrients from different culture media modified the growth of the different species. A. maxima was favoured in seawater enriched with Guillard's F/2 as well as C. vulgaris and N. gaditana but in fresh water medium. I. galbana had the greatest growth in the marine environment enriched with Walne’s media. Nitrate was the limiting growth reagent at the end of the exponential phase of growth for C. vulgaris and N. gaditana, while iron was for A. maxima and I. galbana. All species demonstrated their capability to grow in effluents from a wastewater treatment plant and they efficiently consume nitrogen, especially the three microalgae species.

Abstract In order to reduce the failure accidents of conventional packers, a kind of sealing structure of retrievable packers is designed, which can provide reference for optimizing the sealing performance and pressure capacity of packers. And theoretical calculation and experimental research on its sealing performance and pressure capacity are carries out through the finite element analysis on the contact with large deformation based on Abaqus and experimental. The results show that when the rubber cylinder of retrievable packers in the sealing process, the upper packer is subjected to greater stress and mainly plays a sealing role. In order to improve the sealing performance of packer, the height of upper and lower packer should be preferentially selected about 60 mm, the height of middle rubber cylinders should be about 50 mm, and the thickness of packer should be about 21 mm. The newly designed rubber cylinders can meet 150 ℃. Sealing and pressure-bearing function under the condition of 10000 Psi. The rubber cylinder of newly designed can satisfy the function of sealing and pressure-bearing under 140 ℃ and 10000 Psi. The whole experiment shows that the capacity of bearing pressure and sealing is stable, which can better meet the requirements of field use.

The utilization of eco-fonts for office printing is a sustainable, “green” printing concept, which has obvious economic benefits. As a result, it has a significant effect on environmental sustainability. This practice's fundamental problem is the decreased quality of text printed using eco-fonts compared to those printed with regular fonts. The aim of this research is eco-font efficiency estimation, i.e. determination of toner usage reduction level of inkjet-printed documents typed with this font type, as well as estimation of the extent humans perceive differences between text printed with eco-font and the one printed by its “non-eco“ equivalent. Combining the instrumental measuring method and digital image analysis, it was found that this simple principle (eco-font utilization) enables substantial toner usage reduction for an inkjet printing system. At the same time, a visual test showed that the visual experience of text printed using eco-font was sufficient. In addition, awareness of the benefits that eco-font utilization brings, change users’ attitude towards eco-font quality. The concept of removing the black pixel from this commonly used Thai font has a great potential for the sustainability printing process, and this simple solution could be applied to other languages as part of the GIT campaign.

This review paper delves into the multifaceted aspects of pineapple cultivation, focusing on morphology studies, harvesting challenges, and mechanization efforts. Pineapple, renowned for its commercial value and unique flavor, holds a prominent position in global agriculture, with India alone producing 19.64 lakh tonnes annually. However, the hilly terrains of regions like northeastern India pose significant hurdles to traditional harvesting methods, necessitating innovative solutions. Understanding the morphology of pineapple plants is crucial for optimizing cultivation practices and designing efficient harvesting equipment. Insights from various studies shed light on leaf structure, fruit maturity, and growth patterns, providing valuable information for engineering tailored solutions. Mechanization endeavors, including semi-mechanized harvesting machines and semi-manual harvesters, demonstrate promising results in improving efficiency and reducing labor-intensive practices. Despite challenges such as increased crop losses and operational costs, continued research and development in mechanization hold the key to sustainable pineapple cultivation. This paper underscores the importance of integrating morphology studies and mechanization efforts to address the unique challenges faced by pineapple farmers, particularly in hilly terrains, and highlights the need for ongoing innovation to ensure the long-term sustainability of pineapple cultivation.

This study delves into the dynamics of 'Variations' and 'Claims' within construction projects, specifically under the FIDIC-Red Book 1999 (FIDIC 1999) framework. It aims to identify, categorize, and devise mitigation strategies for key types of Variations and Claims, aligning with the FIDIC Conditions of Contract. The research, drawing on inputs from construction industry professionals including Contract Administrators and Project Managers, focuses on the MENA re-gion. This choice is driven by the region's extensive adoption of FIDIC standards and its rapidly growing construction sector. Data collection encompassed a questionnaire distributed to 80 industry experts, predominantly through interviews, focusing on countries like Saudi Arabia, UAE, Kuwait, and Egypt. These locations were chosen to reflect diverse construction practices and the involvement of international firms. Utilizing SPSS-V.25 for statistical analysis, the study uncovers the most prevalent and impactful causes of Variations and Claims, highlighting the critical need for managerial intervention. A key feature of this study is the integration of Scientometric Analysis for a quantitative review of current literature, providing a comprehensive academic context. A significant addition to the methodology is the implementation of a k-means clustering analysis. This advanced statistical technique further classifies the data into distinct clusters, each representing unique combinations of 'Frequency' and 'Impact' of Variations and Claims. The k-means analysis elucidates intricate patterns and potential solutions, offering profound insights into effectively managing these issues. These analytical advancements are crucial in identifying significant and manageable responses to reduce the frequency and impact of Variations and Claims in construction projects.

Now-a-days, the thrust area of materials’ research is to develop multifunctional materials, which have multiple properties in a single functional material. We are interested to develop multifunctional polysilanes having special functional properties such as optical activity and photoluminescence (PL) properties. In this investigation, poly(methyl phenyl silane) (PMPS) was integrated with a chiral unit and a photoactive unit by in situ photopolymerization of (R)-N-(1-phenyl ethyl) methacrylamide (R-NPEMAM) and disperse red 1 methacrylate (DR1MA) monomer in the presence of PMPS. PMPS acted as a macrophotoinitiator and by UV exposure it produced macroradicals which initiated polymerization of chiral and photoactive monomers. Thus a block copolymer of PMPS-b-(R-NPEMAM-ran-DR1MA) was synthesized.The synthesized multifunctional organic inorganic hybrid polymer samples were characterized by FTIR and NMR spectroscopy. The molecular weights of the samples were measured by GPC analysis. The optical, chiroptical and photoluminescence properties were studied. The narrow band at about 1638 cm^-1 is due to C=O stretching vibration of -CONH- of the chiral unit. A wide absorption peaks at 3444 cm^-1 is the characteristic of NH trans stretching vibration of secondary amide group. The asymmetric stretching of NO₂ group appeared at 1481 cm^-1 and the characteristic peak at 1427 cm^-1 was observed due to azo (-N=N-) group stretching of DR1MA unit. The Si-Si band of PMPS appeared at about 462 cm^-1 in FTIR spectra. The optical absorbance observed at 272 nm is due to π-π* transition of aromatic ring and at 330 nm corresponds to σ-σ* transition of Si-Si bond. The other electronic absorption observed in the visible region at 475 nm corresponds to the combined contribution of n-π* and π-π* transition of DR1MA unit. The photoluminescence properties of such polymers were studied for the variation of concentration of the polymer solution and variation with excitation energy such as 275 nm, 325 nm and 475 nm in THF solvent. Such synthesized multifunctional photoactive organic-inorganic polymers having unusual optical, chiroptical and photoluminescence property may find novel optoelectronic (friend foe identification and secretive code identification) applications.

In this paper, we critically examine the burgeoning role of advanced computational methodologies in deciphering the complex tapestry of farm animal behaviors and emotions. Leveraging digital imaging and artificial intelligence, we unearth nuanced behavioral patterns and micro-expressions, offering predictive insights into animal emotional states. Sound vocalization analysis, often overlooked, emerges as a pivotal tool, decoding intricate communicative nuances and emotional undertones. Cognitive tests, including mirror and bias assessments, challenge long-standing perceptions, revealing surprising depths of animal self-awareness and cognitive sophistication. However, the paper also underscores the imperative of integrating these tools with a profound understanding of animal psyche, ensuring technology serves as an enhancer, not a replacement, of traditional observational methods. This research not only highlights the transformative potential of cognitive computing in animal welfare but also calls for a judicious application, ensuring technology augments, not undermines, the intrinsic value of human-animal interactions and understanding.

The sustainable development of mines has been the focus of attention in recent years, in China, there are a large number of untreated mined-out areas, and a series of disasters caused by instability of the goaf will bring heavy blows to people’s safety and financial resources. Mined-out areas management is an important part that cannot be ignored in mine sustainable development, and filling management is one of the most effective ways to solve the hidden danger of mined-out areas. Among them, cemented filling with tailings and the ultra-high-water backfilling are commonly used in mining enterprises. However, filling treatment will lead to increasing cost and the decreasing profits, which seriously depresses the motivation of mining enterprises and even leads to mor-al hazard. Therefore, the analysis of the economic benefits of goaf control plays a vital role in the sustainable construction and long-term development of mines. This paper proposed the mine-out area treatment economic model, the proposed method employs the guiding philosophy of news-boy model to create a mathematical economy model that provides the basis of goaf management mode for mine. The following research results are achieved: (1) The economic model of mined-out area backfilling treatment is constructed, and which is classified three different modes. (2) Com-bined with mathematical derivation and simulation, the influence of relevant variable parameters on each type of filling mode is discussed. (3) Various types of goaf filling treatment mode are com-pared with non-filling scheme (benchmark mode), so as to provide theoretical support for mining enterprises to choose the appropriate filling scheme. The results shows that the economic model of mined-out area management provides the optimal mode for mined-out area filling, the balance of tailings and ultra-high water filling materials procurement is realized, to making maximum profits. In this paper, the use of economic thinking has an important impact on the sustainable development of safety goaf management. To evaluate the sustainable development of goaf management by building economic models. It has important theoretical basis and practical guiding significance for the development and exploration of mined-out area management by combining economy with sustainable development.

Using LSMS-ISA panel data, we analyzed determinants of diversification into Rural Non-Farm Enterprises (RNFEs) and dynamics of the sector by studying the transition between farming and both low- and high-return RNFEs. We found that diversification into RNFE is determined by household characteristics mainly age and gender of the household head, whereas initial capital endowments such as assets, human capital, land and livestock significantly affect level of participation than entry into RNFE. Furthermore, analysing dynamics of RNFE separately for the youth and matured households, our study finds that continuous participation in RNFE is higher among the youth than among matured households. Similarly, initial capital endowments mainly educational level and access to credit are important factors for the youth to transit to high return RNFE, implying that entrepreneurial skills development and access to finance that enhance investments and gradual accumulation of capital are vital for the youth to benefit from RNFEs. Moreover, shocks that affect agricultural productivity are significant in increasing the probability of transition out of high-return RNFE signifying the need for social protection measures to ensure growth of RNFEs.

This review focuses on developments that quantify grain quality with a range of spectral sensors in an on-farm setting. If the application of sensor technologies were expanded and adopted on-farm, growers could identify the impact and manage the harvesting operation to meet a range of quality targets and provide an economic advantage to the farming enterprise.

This study explores the capital structure determinants of Korean firms over an extensive period (1995-2021), encompassing both stable and crisis conditions. Employing a dynamic panel data model and the Generalized Method of Moments (GMM) estimation, we address the endogeneity issue introduced by the inclusion of lagged dependent variables. Our research integrates firm-specific internal factors with macroeconomic external variables to provide a comprehensive understanding of the influence of varying economic environments on capital structure. Our study suggests that in times of economic stability, the capital structure decisions of a firm are more influenced by internal factors such as profitability. However, in periods of economic downturns, it's the external macroeconomic market conditions that tend to have a greater impact on these decisions. It's also noteworthy that both book leverage (BL) and market leverage (ML) exhibit quicker adjustments during stable periods as opposed to periods of crisis. This indicates a higher agility of firms in adapting their capital structures in stable normal conditions. Our findings contribute to existing literature by offering a holistic view of capital structure determinants in Korean firms. They underscore the necessity of adaptable financial strategies that account for both internal dynamics and external economic conditions. This study fills a gap in current research, presenting new insights into the dynamics of capital structure in Korean firms and suggesting a multifaceted approach to understanding capital structure in diverse economic contexts.

Micellar Casein Concentrate (MCC) is manufactured from microfiltration (MF) of skim milk utilizing ceramic or polymeric membrane filtration. While ceramic filtration has higher efficiency, use of polymeric is cost effective and the process is familiar to several US dairy processors. The aim of the present study was to develop an optimized membrane filtration process to produce MCC using spiral wound polymeric membrane filtration (SW MF) system by systematic selection of transmembrane pressure (TMP) and level of diafiltration (DF). Using skim milk as feed material, preliminary lab-scale MF experiments were conducted using 0.5 µm polyvinylidene fluoride (PVDF) membrane. Three TMP (34.5, 62.1, and 103.4 kPa) and three levels of DF (70, 100, and 150%) along with a process without DF as control were used in the study. Effect of TMP and effectiveness of DF on flux rates, SP removal, casein to total protein (CN/TKN) ratio, casein to true protein (CN/TP) ratio, rejection of casein (rej CN) and SP (rej SP) were evaluated. At all TMP values used in the study, the overall flux (O Flux) increased with the level of DF. Highest O Flux of 30.77 liter per meter square per hour (LMH) was obtained with 34.5 kPa pressure and 150% DF. The impact of DF was more pronounced at lower pressures than at the higher pressures used in the study. With controlled DF, instantaneous flux was maintained within 80% of initial flux for the entire process run. For all the experiments, casein has a rejection of 0.97 to 1.0, while serum protein has the lowest rejection of 0.10 at 34.5 kPa pressure and 150% DF level. Use of 34.5 kPa and DF level of 150 % contributed to 81.45% SP removal, and casein to true protein ratio of 0.96. SP removal data from the lab-scale experiments were fitted into a mathematical model using DF and square of TMP as factors. The model predicts SP removal within 90-95% of actual SP removal got from the pilot plant experiments.

In 2020-2021, the second massive dissemination of a highly-pathogenic avian influenza (HPAI) of H5Nx subtype occurred in Europe. During this period, the virus caused numerous outbreaks in poultry, including in the Czech Republic. In the present study, we provide an insight into the genetic variability of the Czech/2021 (CZE/2021) H5N8 viruses to determine the relationships between strains from wild and domestic poultry and to infer transmission routes between the affected flocks of commercial poultry. For this purpose, whole genome sequencing and phylogenetic analysis of 70 H5N8 HPAI genomes representing 79.7% of the cases were performed. All CZE/2021 H5N8 viruses belonged to the 2.3.4.4b H5 lineage and circulated without reassortment, retaining the A/chicken/Iraq/1/2020 H5N8-like genotype constellation. Phylogenetic analysis suggested frequent local transmission of H5N8 HPAI from wild birds to minor poultry and extensive farm-to-farm spread among commercial poultry farms. In addition, the analysis suggested one cross-border transmission event. Indirect transmission via contaminated materials was considered the most likely source of infection. Improved biosecurity and increased collaboration between the field veterinarians and the laboratory are essential to limit the local spread of the virus and to reveal and interrupt critical routes of infection.

.Maize cultivation in Thailand faces challenges owing to climate change and soil organic carbon (SOC) loss. This highlights the importance of comparing maize soil with paddy soil in terms of the role of dissolved organic carbon (DOC) and nutrient availability, as they influence SOC content. Soil samples from Chiang Mai province, primarily Fluvisol, were collected for the cultivation of paddy rice and maize, analysed for carbon fractions and chemical properties, and categorised into layers. Comparative analysis revealed that maize soils had lower levels of labile carbon components and organic carbon than paddy soils (P

In this study, the causal-effect between carbon dioxide emissions and forestry production and trade was investigated in Ghana by employing a data spanning from 1961 to 2014 by using the VECM and ARDL model. Evidence of the long-run equilibrium relationship in the VECM shows that, a 1% increase in veneer sheet production reduces carbon dioxide emissions by 1.47% in the long-run. There was evidence of a bidirectional causality between carbon dioxide emissions and veneer sheet production, carbon dioxide emissions and wood charcoal production, and a unidirectional causality running from carbon dioxide emissions to wood fuel production and plywood production to carbon dioxide emissions. Evidence from the long-run equilibrium relationship in the ARDL model shows that; a 1% increase in plywood production will increase carbon dioxide emissions by 0.17% in the long-run, a 1% increase in sawnwood production will increase carbon dioxide emissions by 0.17% in the long-run, a 1% increase in wood charcoal production will increase carbon dioxide emissions by 0.36% in the long-run and a 1% increase in wood fuel production will increase carbon dioxide emissions by 0.37% in the long-run.

The aims of this study are to measure the technical efficiency (TE) of Cambodian household’s rice production and trying to determine its main influencing factors using the stochastic frontier production function. The study utilized primary data collected from 301 rice farmers in three selected districts of Battambang by structured questionnaires. The empirical results indicated the level of household rice output varied according to differences in the efficiency of production processes. The mean TE is 0.34 which means that famers produce 34% of rice at best practice at the current level of production inputs and technology, indicates that rice output has the potential of being increased further by 66% at the same level of inputs if farmers had been technically efficient. Furthermore, between 2013-2015 TE of household’s rice production recorded -14.3% decline rate due to highly affected of drought during dry season of 2015. Moreover, evidence reveals that land, fertilizer, and pesticide are the major influencing input factors of household’s rice production, while disaster, education of household head, family size and other crops’ cultivated area are core influencing factors decreasing TE. Conversely, the main influencing factors increasing TE are irrigated area, number of plot area and sex of household head.

The aims of this study are to measure the technical efficiency (TE) of Cambodian household’s rice production and trying to determine its main influencing factors using the stochastic frontier production function. The study utilized primary data collected from 301 rice farmers in three selected districts of Battambang by structured questionnaires. The empirical results indicated the level of household rice output varied according to differences in the efficiency of the production processes. The mean TE is 0.34 which means that famers produce 34% of rice at best practice at the current level of production inputs and technology, indicates that rice output has the potential of being increased further by 66% at the same level of inputs if farmers had been technically efficient. Furthermore, between 2013-2015, TE of household’s rice production recorded -14.3% decline rate due to highly affected of drought during dry season of 2015. Moreover, evidence reveals that land, fertilizer, and pesticide are the major influencing input factors of household’s rice production, while disaster, education of household head, family size and other crops’ cultivated area are core influencing factors decreasing TE. Conversely, the main influencing factors increasing TE are irrigated area, number of plot area and sex of household head.

Wind energy in Europe is aimed to grow at a steady, high pace, but opposition from residents to local wind farm plans is one of the obstacles to further growth. A large body of evidence shows that local populations want to be involved and respected for their concerns, but in practice this is a complex process that cannot be solved with simple measures such as financial compensation. The visual presence and the acoustic impact of a wind farm is an important concern for residents. Generally environmental noise management aims to reduce the exposure of the population, usually based on acoustics and restricted to a limited number of sources (such as transportation or industry) and sound descriptors (such as Lden). Individual perceptions are taken into account only at an aggregate, statistical level (such as percentage of exposed, annoyed or sleep-disturbed persons in the population). Individual perceptions and reactions to sound vary in intensity and over different dimensions (such as pleasure/fear or distraction). Sound level is in fact a weak predictor of the perceived health effects of sound. The positive or negative perception of and attitude to the source of the sound is a better predictor of its effects. This article aims to show how the two perspectives (based on acoustics and on perception) can lead to a combined approach in the management of a wind farm aimed to reduce annoyance, not primarily of sound level. An important aspect in this approach is what the sound means to people: is it associated with the experience of having no say in plans, does it lead to anxiety or worry, is it appropriate? The available knowledge will be applied to wind farm management: planning as well as operation.

Despite recent scientific advancements, there is a gap in the use of technology to measure signals, behaviors, and processes of adaptation physiology of farm animals. Sensors present exciting opportunities for sustained, real-time, non-intrusive measurement of farm animal behavioral, mental, and physiological parameters with the integration of nanotechnology and instrumentation. This paper critically reviews the sensing technology and sensor data-based models used to explore biological systems such as animal behavior, energy metabolism, epidemiology, immunity, health, and animal reproduction. The use of sensor technology to assess physiological parameters can provide tremendous benefits and tools to overcome and minimize production losses while making positive contributions to animal welfare. Of course, sensor technology is not free from challenges; these devices are at times highly sensitive and prone to damage from dirt, dust, sunlight, colour, fur, feathers, and environmental forces. Rural farmers unfamiliar with the technologies must be convinced and taught to use sensor-based technologies in farming and livestock management. While there is no doubt that demand will grow for non-invasive sensor-based technologies that require minimum contact with animals and can provide remote access to data, their true success lies in the acceptance of these technologies by the livestock industry.

There is a large body of research on determining the impact of field variability of soil on crop yields. In contrast, site-specific information about crop responses to agronomic treatments is less frequent. On-Farm Precision Experimentation (OFPE) brings important information to understand the spatial variation of crop response to agronomic practices and thus to improve agronomic decisions. The objective of this work was to investigate the spatial variability of corn yield responses to nitrogen and seed rates using OFPE in four fields in the US Midwest. Geographically weighted regression was applied to generate local regression coefficients, which were used to delineate response zones in each field. The results showed the existence of great potential to adjust the rates of these inputs according to the response of each zone identified by the proposed method. The results of this study can be applied to reevaluate expectations on variable rate prescriptions guided largely by soil and variability.

-- This paper examines the critical role of business analysis in shaping small and medium-sized enterprises’ strategies for better odds of success in the ever-evolving Nigerian economy and within the competitive markets. Business analysis ability, as a knowledge-supporting factor, focuses on understanding consumer needs, planning, data collection, analysis, and presentation to decision-makers. The process begins with strategic planning and meticulous data collection, facilitating a deep understanding of the business and consumer behavior and process potential. Analytical skills unearth the true potential of organizational processes, particularly in product creation, resulting in distinctive and highly valued products. Such products align with theories like the resource-based view or VRIO theory, driving increased sales volume—a key performance metric. By leveraging analytical capabilities, Nigerian SMEs can navigate complex market dynamics, create value-driven businesses, and differentiate themselves from competitors thus increasing the odds of success. This paper sets the stage for further research into the impact of business analysis on organizational success within dynamic market landscapes.

Current-voltage characteristics curves of NFinFET are presented and are fitted with the modi-fied current-voltage (I-V) formulas, where the modified term in the triode region is demon-strated to be indispensable. In the as-known I-V formula, important parameters need determin-ing to make both the measured data and the fitting data as close as possible. Those parameters include kN (associated with the sizes of the transistor and mobility), (associated with Early Voltage), and Vth (the threshold voltage). The differences between the measured data and the fit-ting data vary as the applied source-drain bias, proving that the mobility of the carriers is not consistently constant. On the other hand, a modified formula, called kink effect factor, is nega-tively or positively added simulating solitary heat waves, which disturb the propagation of car-riers and thus influence the Source-Drain current (IDS). The new statistical standard deviations () are then found to be effectively suppressed as the kink effect is taken into account.

This article evaluates Europe's building sector's circular economy (CE). This industry is respon-sible for 42% of energy consumption, more than 50% of extracted materials, 30% of Europe's wa-ter and waste generation, and 35% of greenhouse gas (GHG) emissions. This study focuses on peer-reviewed articles from Scopus and Web of Science databases. Of the first 1750 publications, 2.9% were eligible for a full-text reading and analysis. Most of the trending studies, 92%, pro-mote the circular economy concept through construction materials rather than analyzing the im-pact of the construction sector on the environment and finding solutions for better implementa-tion, and 41% promote recycling and reuse as the only options. New Design solutions are in 12% of the studies, six-fold more than Law and Legislation, only 2%. Finding an optimal combination of assessing the life cycle of buildings and components and searching for different ways of man-aging the Construction and Demolition Waste at end-of-life is between 33% and 39%. Ultimately, one evaluated CE proposed frameworks for the building industry based on 10R principles varia-tions. One presents an alternative framework for a circular strategy for the building industry that focuses on Upcycling, replacing the Recover principle.

The shift towards lean production is gradually replacing traditional mass production, and lean accounting is also being mentioned to evaluate operational efficiency based on the lean philosophy, eliminating waste, and simplifying direct cost aggregation along the value stream to improve productivity, distribution, quality, and service. This study aims to evaluate the impact of various factors on the adoption of lean accounting in Vietnamese garment firms, based on data collected from 242 survey questionnaires completed by managers and accountants of Vietnamese garment firms. Through Cronbach's Alpha test, EFA test, and multiple regression analysis to verify and forecast information, eight determinants affecting the adoption of Lean Accounting in Vietnamese garment firms are arranged in descending order of influence, including Leadership, Size, Cost of implementation, Resources, Accounting department, Education and training, Culture, and Competitive pressure. Based on the findings, recommendations are proposed to management businesses and agencies to address shortcomings in the process of applying lean accounting, contributing to making it one of the most effective tools in promoting product development and continuous improvement, enhancing quality and production efficiency.

Today’s export-based manufacturers face the need to implement green supply chains more efficiently in order to overcome environmental barriers in increasingly competitive export markets and to improve export performance. This study examines the structural relationship between environmental collaboration, green innovation capacity, and performance based on the findings of previous studies in order to identify the factors affecting the green supply chain management (GSCM) performance of Korean export-based manufacturers. The study finds that environmental collaboration in the green supply chain environment is an important driver of green innovation capacity for export-based Korean manufacturers. It also finds that green innovation capacity has a positive effect on export performance through environmental performance. This study establishes a theoretical basis for the systematic study of the structural mechanisms of green supply chains and suggests strategic directions for export-based manufacturing firms’ successful GSCM implementation.

Abstract: Purpose – In this article we lay out the change management practices adopted by financial firms in small states within the Eurozone. We determine whether these organisations have the ability to identify triggers for change (Red Flags) and subject them to eight thematic elements to understand whether management practices can continue to exist and support operational environments, even when unexpected circumstances affect their day to day operations and processes. In doing this we examine the extent to which the eight thematic elements from the model designed by Dalli Gonzi, (2019) (The Dali Model) can assist organisations in risk identification and business continuity planning. Design/methodology/approach – A self-administered questionnaire purposely designed for this study was administered to personnel working in internal controls within financial institutions of small Eurozone states. The participants were asked to grade statements using a 5-point Likert scale, ‘1’ being ‘totally disagree’ and ‘5’ being totally agree’ to the statement posed under the thematic elements forming the basis of the Dali Model. Findings – Factor analysis provided support for the eight hypothesised dimensions of the decision-making model: connection, capacity, governance, network, policy, training, process improvement, standards. Originality/value – The study provides a better understanding and support of “best practice” in change management through an understanding and assessment of the eight factors that are the basis of this model. It addresses practical recommendations to ensure application to a wider frame of use.

In recent years, the production of renewable energy represents one of the main challenges of modern and future society. The new cultivation method called Agrivoltaic (hereafter AV), combines and associates agricultural production and renewable energy (photovoltaic) production in a collaborative synergy from which both benefit. In this study, the dry matter and essential oils yield of six medicinal species (Salvia officinalis L., Origanum vulgare L., Rosmarinus officinalis L., Lavendula angustifolia L., Thymus citriodorus L. and Mentha spicata L.) grown underneath a dynamic AV system in comparison to those in full sun (T), were evaluated. In particular, below the dynamic AV system, due to the rotation of the panels, two plot areas on the ground were distinguished: one always covered by the panels (UP), and another one covered alternatively (BP). During the aromatic crop cycles, the solar radiation, infrared leaf temperature and air temperatures in UP, BP and T plot, were measured. In addition, at harvest time, weed survey was carried out. The results showed that, in general, the solar radiation and infrared leaf temperature were lower in UP plot than in either the BP and T plots, while the air temperatures were similar in all compared plots. Also the weed cover percentage was lower in the UP plot than other ones. The essential oils yield in the sage, thyme, mint and rosemary plants were higher in both UP and BP plots than for T plot. Thus, shading and/or less weed infestation may have been the main factors favorably influencing the performance of medicinal crops under a dynamic AV system.

Climate change and food security are the most relevant issues to be considered in sustainable agricultural development. The FAO’s initiative of climate-smart agriculture has attracted international attention. Since then, the smart agriculture (SA) has been recognized as the most influential trends in contributing to agricultural development. Therefore, encouraging farmers to adopt digital technologies and mobile devices into farming practices becomes a policy priority worldwide. However, there is limited literature available on psychologic factors that drive farmers’ intentions to adopt SA technologies. The purpose of this study is to investigate how farmer’s knowledge and attitude toward SA affects their adoption of smart technologies in Taiwan. A total of 321 farmers participated in the project’s survey in 2017 and 2018, from which the data was used to perform an OLS regression model of SA adoption. This study contributes to a preliminary understanding of relationship between innovation and adoption of SA technologies in a small-scale farming economic context. The findings suggest that the policy makers and R&D institutes need to concentrate on improving market access for well-known and high important SA technologies.

Earnings management and financial distress are two critical facets of financial management in corporations that have lately been the focus of thorough research from both scholars and practitioners. The purpose of the research is to evaluate the influence of financial distress on the earnings management of companies listed at the NSE during the pre- and post-COVID eras. Multiple linear regression was applied in this study to examine the causal association between earnings management and financial distress. To assess the effect of financial distress on earnings management, the study analyzed data from 37 listed companies during the pre-COVID and post-COVID periods. The methodology also takes into account control factors like firm size, GDP, and inflation. The pre-COVID research indicates a significant positive correlation between financial strain and earnings management. In contrast, the correlation between financial distress and earnings management is not statistically significant in the post-COVID analysis. However, research shows that firm size has a statistically significant negative influence on managing earnings. The results of this study show that smaller firms are more inclined to engage in earnings management during the post-COVID era than bigger ones.

This paper aims to explore differences in personality traits, focusing on the levels of primary psychopathy, between formal leaders of family and non-family companies as well as assessing differences in the job satisfaction levels of their employees. Moreover, we assess the relationship between the employees' perception of their formal leader’s primary psychopathy levels and their job satisfaction levels in family firms. The empirical evidence is provided by a sample of 95 Portuguese employees, who responded to a questionnaire that included their perception of their formal leader’s primary psychopathy level and job satisfaction measures. All respondents work in small and medium-sized private companies with no management responsibilities and under formal hieratical supervision. The initial idea that family firms’ employees perceive lower levels of primary psychopathy in their formal leaders than non-family firms’ employees was confirmed. However, employees of family and non-family firms did not differ in their job satisfaction levels. The results also support the notion that perceived levels of primary psychopathy in formal leaders are negatively associated with the employees’ job satisfaction levels. These findings contribute to the research literature by addressing two aspects under-addressed in the comparison between family and non-family firms, while offering insights on the relationship between primary psychopathy in formal leaders and job satisfaction levels of employees working in family firms.

A key step in the study of tree pathology is the identification of appropriate method for inoculating pathogens of diseases in branch and trunk. Pathogens of diseases in branch and trunk are commonly inoculated through punching, burning, and toothpick inoculation. However, there is a lack of comparative analysis of the inoculation outcomes of these three methods. In this work, Six‐year‐old P. alba var. pyramidalis were inoculated with V. sordida, using punching, burning, and toothpick techniques, respectively, to investigate the differences in the effectiveness of these inoculation methods. Results reveal that the incidence rate was 93.55% in the toothpick inoculation group, significantly higher than 80.65% in the burning inoculation group (p = 0.007), while punching inoculation exhibited significant pathological responses in the early stages, with spontaneous healing in the later stage. Addi-tionally, toothpick inoculation was more efficient in inducing Valsa canker when inoculating the pathogen at the bottom of the tree, with lower intra‐ and inter‐row spacing (stand density) providing better outcomes than higher intra‐ and inter‐row spacing. The results of this study demonstrate that toothpick inoculation is an optimal option for studying the artificial inoculation of V. sordida in six‐year‐old P. alba var. pyramidalis, providing technical support for research on poplar diseases and offering a theoretical basis for the inoculation of other diseases in branch and trunk.

Plants belonging to the genus Irvingia are widespread across the African and Southeast Asian regions of the world. Irvingia gabonensis, Irvingia malayana, and Irvingia grandifolia are among the commonly used species in ethnomedicine, especially in Africa. Fever, scabies, toothache, inflammation, and liver and gastrointestinal disorders are among the pathological conditions that are reverted by Irvingia plants upon traditional preparations. Modern pharmacological investigations have substantiated the ethnomedicinal uses of Irvingia spp. Reports on the phytochemical analysis of Irvingia plants have revealed the presence of a number of secondary metabolites, such as flavonoids, phenolic compounds, tannins, saponins and alkaloids. Based on the foregoing, the present study provides a comprehensive evaluation of reports on the ethnomedicinal use, phytochemistry, pharmacology, and toxicity of plants from the genus Irvingia. Relevant information on Irvingia plants was mostly obtained from major scientific databases from their inception until July 2023. As a result, more than forty compounds have been identified in Irvingia spp. proving the abundance of secondary metabolites in these plants. Reports have pointed out modern pharmacological activities, such as antiprotozoal, antimicrobial, antioxidant, antidiabetic, anti-inflammatory, and hepatoprotective activities. The present study provides more insights for the successful utilization of Irvingia plants and may guide further research on their therapeutic potential in the treatment of various diseases.

Our search of existing cancer databases aimed to assess the current landscape and identify key needs. We analyzed 71 databases, focusing on genomics, proteomics, lipidomics, and glycomics. We found a lack of cancer-related lipidomic and glycomic databases, indicating a need for further development in these areas. Proteomic databases dedicated to cancer research were also limited. To assess overall progress, we included human non-cancer databases in proteomics, lip-idomics, and glycomics for comparison. This provided insights into advancements in these fields over the past eight years. We also analyzed other types of cancer databases, such as clinical trial databases and web servers. Evaluating user-friendliness, we used the FAIRness principle to assess findability, accessibility, interoperability, and reusability. This ensured databases were easily accessible and usable. Our search summary highlights significant growth in cancer databases while identifying gaps and needs. These insights are valuable for researchers, clinicians, and database developers, guiding efforts to enhance accessibility, integration, and usability. Addressing these needs will support advancements in cancer research and benefit the wider cancer community.

(1) Background: Truing to find a fast and representative method for the approximate calculation of the culture density and the cell content of useful pigments, the examination of the absorption spectra of cultures of the dinoflagellate Amphidinium carterae, the haptophyte Isochrysis galbana, the chlorophyte Nephroselmis sp. and the filamentous cyanobacterium Anabaena sp. were chosen, as representative species of different taxa. (2) Methods: The experimental cultures were made in small volumes with the discontinuous method, under specific conditions each one and during the culture the absorption spectra, the density of the culture and the concentration in the pigments chlorophyll, total carotenoids and phycocyanin was recorded. (3) Results: The algal density can be quite precisely predicted as the regression equation of the correlation of the OD value of 750 nm drawn from each absorption spectrum and the measured algal biomass was very strong. The same applies also for the relevant correlations between OD 750 nm and the recorded pigments. (4) Conclusions: Absorption spectra of microalgal cultures can be an easy, low cost and non-invasive method to get the necessary information for predicting the right time to collect an ideal combination of maximum biomass and useful pigments, provided that the interpretation of the spectra is done considering that they are usefully applicable for that purpose in a case sensitive manner in terms of species and prevailing conditions.

Analyzing the cells in various body fluids can greatly deepen the understanding of the mechanisms governing the cellular physiology. Because of the variability of physiological and metabolic states, it is important to be able to perform such studies on individual cells. Therefore, we developed an optofluidic system in which we precisely manipulated and monitored individual cells of Escherichia coli. We used laser tweezers Raman spectroscopy (LTRS) in a microchamber chip to manipulate and analyze individual E. coli cells. We subjected the cells to antibiotic cefotaxime, and we observed the changes by the time-lapse microscopy and Raman spectroscopy. We found observable changes in the cellular morphology (cell elongation) and in Raman spectra, which were consistent with other recently published observations. We tested the capabilities of the optofluidic system and found it to be a reliable and versatile solution for this class of microbiological experiments.

Microsoft has implemented several measures to defend against macro viruses, including the use of Anti-malware Scan Interface (AMSI) and automatic macro blocking. Nevertheless, evidence shows that threat actors have found ways to bypass these mechanisms. As a result, phishing emails continue to apply malicious macros as their essential attack vector. In this paper, we analyze 77 obfuscation features from the attacker’s point of view and extract 46 suspicious keywords in macro. We first combine the above two types of features to train machine learning models on a public dataset. Then, we carry out the same experiment on self-constructed dataset, a collection of newly discovered samples, to see if our proposed method could discover the unseen malicious macros. Experimental results demonstrate that, comparing with the existing researches, our proposed method has a higher detection rate and better consistency. Furthermore, ensemble multi-classifiers with distinct feature selection further improve the detection performance.

Osteoarthritis (OA) is the most common degenerative joint disease that causes chronic pain and disability. Different innate immune components, including macrophages, T cells, and neutrophils, participate in osteoarthritis pathophysiology. Neutrophils are the most abundant circulating leukocytes with multiple specialized functions contributing to innate and adaptive immune functions. Although neutrophils produce proinflammatory cytokines and chemokines, reactive oxygen species (ROS), matrix-degrading enzymes, and neutrophil extracellular traps (NET) that promote joint degradation as the first recruit cells in an inflamed joint, these cells also play an important role in joint repair by regulating the immune response, releasing anti-inflammatory factors, and activating some protective genes. In this review, various aspects of neutrophil biology, their role in inflammation and its association with osteoarthritis, and possible therapeutic approaches to target neutrophils for the treatment of osteoarthritis are described. Understanding neutrophil heterogeneity and their mechanisms of action in joint inflammation, provides a potential strategy for OA management.