This paper analyzes the causal effect between domestic private investment, public investment, foreign direct investment and economic growth in Tanzania during the 1970-2014 period. The modified neo-classical growth model is used to estimate the ieffect of investment on economic growth. Also, the economic growth models based on Phetsavong and Ichihashi (2012) [1], and Le and Suruga (2005) [2]are used to estimate the crowding out effect of public investment on domestic private investment on one hand and foreign direct investment on the other hand. In the same way, the crowding out effect of foreign direct investment on domestic private investment is estimated. A correlation test is applied to check the correlation among independent variables, and the results show that there is very low correlation suggesting that multicollinearity is not a serious problem. Moreover, the diagnostic tests including RESET regression errors specification test, Breusch-Godfrey serial correlation LM test, Jacque-Bera-normality test and white heteroskedasticity test reveal that the model has no signs of misspecification and that, the residuals are serially uncorrelated, normally distributed and homoskedastic. Broadly, the empirical results show that the domestic private investment and foreign direct investment play an important role in economic growth in Tanzania. Besides, a revealed negative, albeit weak, association between public and private investment suggests that the positive effect of domestic private investment on economic growth becomes smaller when public investment-to-GDP ratio exceeds 8-10 percent. Similarly, foreign direct investment tends to marginally reduce the impact of domestic private investment on growth. These results suggest that public investment and foreign direct investment need to be considered carefully in order to avoid a reduced positive impact of domestic private investment on growth. Domestic saving may be promoted to encourage domestic investment for economic growth.

This paper presents an overview of the smart electro-clothing systems (SeCSs) targeted at health monitoring, sports benefits, fitness tracking, and social activities. Technical features of the available SeCSs, covering both textile and electronic components, are thoroughly discussed and their applications in the industry and research purposes have been highlighted. In addition, it also presents the developments in the associated areas of wearable sensor systems and textile-based dry sensors. As it became evident during the literature research, such a review on SeCSs covering all relevant issues has not been presented before. This paper will be particularly helpful for new generation researchers investigating the design, development, function and comforts of the sensor integrated clothing materials.

Dry intrusion is an important mid-latitude atmosphere phenomenon within the upper troposphere and lower stratosphere. It is always found to be related to the cyclogenesis, rainstorm, as well as convection generation and precipitation enhancement. Since the atmosphere environment for any of these above-mentioned weather is terribly complicated, those preexisting popular schemes which takes no account of water vapor may not suitable for detecting the dry intrusion related to these weathers. With regard to the merits and demerits of the current preexisting schemes, a new scheme based on Fengyun-2E geo-stationary satellite data is presented in this study to detect the atmospheric dry intrusion. The scheme is set up based on the statistical relationship between water vapor at high level troposphere, the general moist potential vorticity, ozone concentration and upper-level jet. After using the total amount of ozone and ozone profile operational products retrieved by Fengyun-3 Polar Orbiting Meteorological Satellites and the potential vorticity calculated by ECMWF Interim data for validation, this scheme is applied to analyze two typical middle-latitude weather processes. One is the famous Beijing extreme rainfall of 21 July 2012 and the other is a hailstorm occurred on the eastern China during March 19, 2014. A good application effect in both cases suggests that our new method of detecting dry intrusion is feasible and can be helpful in middle-latitude disastrous weather monitoring and forecasting.

The basis of the work of electroencephalography (EEG) is the registration of electrical impulses from the brain or some of its individual areas using a special sensor/electrode. This method is used for the treatment and diagnosis of various diseases. The use of wet electrodes in this case does not seem viable, for several well-known reasons. As a result of this, a detailed analysis of modern EEG sensors developed over the past few years is carried out, which will allow researchers to choose this type of sensor more carefully and, as a result, conduct their research more competently. Due to the absence of any standards in the production and testing of dry EEG sensors, the main moment of this manuscript is a detailed description of the necessary steps for testing a dry electrode, which will allow researchers to maximize the potential of the sensor in the various type of research.

Agro-meteorology is the relationship between agriculture and weather. All farm activities are affected by weather. Therefore it is always necessary to monitor the weather as a forecast. The aim of the research was to monitor the weather and rainwater samples obtained at Federal College of Agriculture, Akure, Ondo State, Nigeria. For the eight months periods, results were obtained. The mean results for the physicochemical parameters were: TDS (12.25 mg/L), temp (28.13 ^oC), pH (6.63), EC (24.25µS/cm), Free CO₂ (24.38mg/L), nitrate (0.16mg/L), phosphate (0.17mg/L), sulphate (0.18mg/L). The rainwater was colorless and had no odor. The mean meteorological data: The prevailing wind directions were from SE, mostly in May, June, July and November and NE. The dry and wet temperatures were 22-29 ^oC and 20-26 ^oC respectively. The maximum value was observed in the month of July. The correlation matrix showed that there were many strong correlations in the physicochemical properties. The months of May, June and July had the highest wind speed. In these months there would be a need to use a windbreaker around the crops planted to avoid soil erosion and damaging of plants.

Wildfires have always been a part of the history of Mediterranean forests. However, forest regeneration after a wildfire is not certain. It depends on many factors, some of which may be influenced by land management activities. Failure of regeneration will cause a regime shift in the ecosystem, reducing the provision of ecosystem services and ultimately leading to desertification. How can we increase Mediterranean forests’ resilience to fire? To answer this question, we did a literature review, investigating chains of processes that allow forests to regenerate (which we label “regeneration mechanisms”), and assessed the impact of selected management practices documented in the WOCAT database on the regeneration mechanisms. We identified three distinct regeneration mechanisms that enable Mediterranean forests to recover, as well as the time frame before and after a fire in which they are at work, and factors that can hinder or support resilience. The three regeneration mechanisms enabling a forest to regenerate after a fire consist of regeneration (1) from a seed bank; (2) from resprouting individuals; and (3) from unburned plants that escaped the fire. Management practices were grouped into four categories: (1) fuel breaks, (2) fuel management, (3) afforestation, and (4) mulching. We assessed how and under what conditions land management modifies the ecosystem’s resilience. The results show that land management influences resilience by interacting with resilience mechanisms before and after the fire, and not just by modifying the fire regime. Our analysis demonstrates a need for adaptive – i.e. context- and time-specific – management strategies.

Understanding the role of invasive species in ecosystem functioning represents one of the main challenges in ecology. Pteridium aquilinum is a successful cosmopolitan invasive species with negative effects on the ecological mechanisms that allow secondary succession. In this study we evaluated whether P. aquilinum favours the establishment of alternative states, as well as the effect of recovery strategies on the secondary succession. A random stratified sampling was established with three treatments, each one with at least 50 year of fern invasion and with variations on the periodicity of fires and cuttings (chapeos) vs one control without fern bracken We determined the species richness and composition, as well as the relative importance value (IVI) in each treatment. We found that P. aquilinum decreases the action of the mechanisms that allow secondary succession, particularly facilitation. The recovery strategies consist in monthly cuttings and control fires allow to recover the secondary succession and eventually, the regeneration of areas invaded by P. aquilinum. Our study has relevant implications on the ecology of alternative state, and in practical strategies to maintain tropical forests, as well as for the maintenance of environmental services and sustainability.

Bamboo agroforestry is currently being promoted as a viable land use option to reduce dependence on natural forest for wood fuels in Ghana. To align the design and introduction of bamboo agroforestry in conformity with farmers’ needs, perceptions, skills and local cultural practices, information on its acceptability and adoption potential among farmers is necessary. It is therefore the objective of this study to (1) describe bamboo ethnobotany and (2) assess socioeconomic factors that affect the acceptability and adoption of bamboo and its integration into farming practices. Accordingly, information has been collected from 200 farmers in the dry semi-deciduous forest zone of Ghana. The study identified the socioeconomic risks and uncertainties as well as biophysical factors that are likely to influence the potential adoption of bamboo agroforestry in the study region. Gender, age, farmers’ known uses of bamboo, the practice of leaving trees on farmlands, farmers’ networking and access to extension services, land availability and ownership by farmers were identified as suitable predictor variables for the adoption of bamboo agroforestry. It is envisaged that bamboo agroforestry is a good bet in the DSFZ though there is the need to explore domestic energy (fuelwood) provision and substitution potential in order to have a broader picture of the technology.

The alteration of the delicate balance that regulates the secretion and distribution of the tear film determines the dry eye (DE) syndrome, because the tear film represents the interface between the eye and the environment. Despite having a multifactorial origin, the main risk factors for the emergence of the ocular disease are female gender and advanced age. Likewise, morphological changes in several glands and in chemical composition of their secretions such as proteins, mucins, lipidics, aqueous tears, and salinity, are highly relevant factors to maintain a condition of good health of the ocular anterior segment. Another key factor of recurrence and onset of the disease is the presence of local and/or systemic infiammation that reflex on the ocular surface. However, it is one of the most commonly encountered disease in clinical practice and many other causes related to daily life and to lengthen the average life will contribute to the beginning. This review will consider how and what disorders of the ocular surface are responsible for a widespread pathology so. In the end, the most appropriate and new therapies will be briefly exposed according to the specific pathology.

Mechanical forces and mechanical energy are prevalent in living cells. This may be because mechanical forces and mechanical energy preceded chemical energy at life’s origins. Mechanical energy is more readily available in non-living systems than the various forms of chemical energy used by living systems. Two possible prebiotic environments that might have provided mechanical energy are hot pools that experience wet/dry cycles and mica sheets as they move, open and shut, as heat pumps or in response to water movements.

Aluminum base alloys containing chromium (Cr) and zinc (Zn) were produced using extrusion and heat treated powder metallurgy. Cr addition ranged between 5 to 10 wt. % while Zn was added in an amount between 0 to 20 wt. %. Heat treatment processes were performed during powder metallurgy process at different temperatures followed by water quenching. Similar alloys were extruded, with an extrusion ratio of 4.6 to get proper densification. Optical microscopy was used for microstructure investigations of the produced alloys. The element distribution microstructure study was carried out using the Energy Dispersive X-ray analysis method. Hardness and tensile properties of the investigated alloys have been examined. Wear resistance tests were carried out and the results were compared with these of the Al-based bulk alloys. Results showed that the aluminum base alloys containing 10wt. % Chromium and heat treated at 500°C for one hour followed by water quenching exhibited the highest wear resistance and better mechanical properties.

In the last decade, unprecedented progress in the development of neural networks influenced dozens of different industries, among which are signal processing for the electroencephalography process (EEG). Electroencephalography, even though it appeared in the first half of the 20th century, to this day didn’t change the physical principles of operation. But the signal processing technique due to the use of neural networks progressed significantly in this area. Evidence for this can serve that for the past 5 years more than 1000 publications on the topic of using machine learning have been published in popular libraries. Many different models of neural networks complicate the process of understanding the real situation in this area. In this manuscript, we provided the most comprehensive overview of research where were used neural networks for EEG signal processing.

This study assesses the pursued impacts of Tulsi value chain development intervention on the livelihoods of rural poor in Uttarakhand state of India. Tulsi as an alternative livelihood, particularly for the rural poor, is less explored. With increased crop depredation of major cereal crops grown in the district by wild animals and pests, and decreasing availability of water agriculture, attempts were made to improve earnings from Tulsi as an alternative livelihood. Findings suggest that the average households’ gross profit from Tulsi farming increases by more than double within a span of two years. Total crop income of beneficiary farmers’ increases by 0.8 percent for every 1 percent increase in Tulsi income. Intervention helped enhance productivity of Tulsi, thereby enhancing earnings from Tulsi farming. Most importantly, intervention has shown a tremendous adoption rate. Towards the end of the intervention, the value chain work was out-scaled to another 19 villages in Chamoli district, thereby reaching out to more than 400 households.

As professionals, social workers have a special position in relation to considering the needs of children with cancer and their families. Hence, it is important to recognize the experiences and challenges of social workers to improve care of their clients. This study was a qualitative content analysis that aimed to determine a comprehensive understanding of 19 pediatric oncology social workers’ experiences in Iran. Data were collected using semi structured interviews and field observations, analyzed through face content analysis. Concepts extracted from social workers’ experiences consisted of the nature of oncology work, lack of professional competence, low organizational support and professional inferiority that were related to main concept of "exhausting and stressful service". The results indicated that social workers' involvement in stressful and emotionally demanding situations and professional and organizational challenges caused personal exhaustion. In addition to explaining the social workers’ experiences and related factors, the results emphasize the importance of taking care of service providers to prevent them becoming stressed and exhausted. It is also important to protect patients from the consequences of stressed and exhausted care providers so further research is recommended to develop specific intervention.

Background: Suicide is a major health problem. The aim of this study was a comparative study of the causes and methods of completed suicide referred to legal Medicine Organization in Bushehr Province during the years 2006- 2015. Methods: This consideration has been done as a retrospective cross-sectional study; the data were collected by the check list. After coordination to the medico legal 343 cases of completed suicide lead to death over a ten year period from 2006 to 2015 were extracted and the data were analyses by SPSS software. Results: The rate of completed suicide was 2.43 and 1.12 suicides per 100,000 people in male and female, respectively. The mean age were 29.25 and 27.61 years in male and female, respectively p>0.05. A higher completed suicide rate was found among single people. The most common ways of a suicide among people who live in Bushehr were hanging out 184(53.6%), self-Immolation 83(24.2%) and firearms 37(10.8%). Motive of suicide was psychological disorders, Physical disease, Conflict with family and substance abuse. 43(12.5%) people smoking and 22(6.4%) people were both smoking and opioid. During the ten year period of studied, throughout the all years that frequency of hanging out has been higher than others. Conclusion: Due to the high incidence of completed suicide in young people and unmarried individuals also hanging out in male and self-burning in females are prevalent. So determination of preventive measures appears to be necessary. Social factors such as psychological disorders and family conflicts have a noticeable role from .Bushehr people.

Shear connectors are used in steel beam–concrete slabs of composite frame and bridge structures to transfer shear force according to design loads. The existing Y-type perfobond rib shear connectors are designed for girder slabs of composite bridges. Therefore, the rib and transverse rebars of the conventional Y-type perfobond rib shear connectors are extremely large for the composite frames of building structures. We performed push-out tests of stubby Y-type perfobond rib shear connectors for composite frames. These shear connectors have relatively small ribs than conventional Y-type perfobond rib shear connectors. To confirm the shear resistance of these stubby shear connectors, we performed an experiment by using transverse rebars D13 and D16. The results indicate that these shear connectors have suitable shear strength and ductility for application in composite frame structures. The shear strengths obtained using D13 and D16 were not significantly different. However, the ductility of the shear connectors with D16 was 45.1% higher than that of the shear connectors with D13.

The aim of this study was to develop a basic model to predict enteric methane emission from dairy cows and to update operational calculations for the national inventory in Norway. Basic models were developed using a database with 63 treatment means from 19 studies. The database included records for enteric CH4 production (MJ/day), dry matter intake (DMI), and dietary nutrient composition. The basic models were evaluated against an external database (n=36, from ten studies) along with other extant models. When evaluated by low root mean square prediction errors and high concordance correlation coefficients, the developed basic models that included DMI, dietary concentrations of fatty acids and neutral detergent fiber performed slightly better in predicting CH4 emissions than extant models. In order to propose country-specific values for the CH4 conversion factor Ym (% of gross energy intake partitioned into CH4) and thus to carry out the national inventory for Norway, the existing operational model was updated for the prediction of Ym over a wide range of feeding situations using energy corrected milk and dietary concentrate share as predictor variables. Input values of Ym were updated based on the results from the basic models. The predicted Ym ranged from 6.22 to 6.72%. In conclusion, the prediction of CH4 production from dairy cows was improved with the help of newly published data, which enabled an update of the operational model for calculating the national inventory of CH4 in Norway.

Xerostomia is a subjective symptom of dry mouth resulting from various causes, including side effects of medication, systemic disorders, radiation, and Sjögren’s syndrome. Recently, the number of patients afflicted with xerostomia has increased due to an increase in the elderly population and patients on medication.; (2) Methods: A systematic approach is required to determine the etiology and management of xerostomia. This review summarizes recent literatures on the diagnosis and management of xerostomia.; (3) Results: A patient with xerostomia experiences difficulty in chewing, swallowing, speaking, tasting, and maintaining oral hygiene. Xerostomia and hyposalivation are uncomfortable side-effects in many patients. Assessing the function of the salivary gland is essential for selecting an appropriate treatment, improving symptoms, and preventing oral complications. Also, a more systematic approach is required to differentiate the subjective symptoms of the patient from the objective hyposalivation.; and (4) Conclusions: Although there is no standardized treatment for xerostomia, doctors need to endeavor and adapt the various treatments of xerostomia, to unearth the optimal treatment required for the patient.

In this work, we focus on investigating electrothermal flow in a rotating electric field (ROT-ETF), with primary attention paid to the horizontal traveling-wave electrothermal (TWET) vortex induced at the center of the electric field. The frequency-dependent flow profiles in the microdevice are analyzed using different heat transfer models. Accordingly, we address in particular the importance of electrode cooling in ROT-ETF as metal electrodes of high thermal conductivity while substrate material of low heat dissipation capability are employed to develop such microfluidic chips. Under this circumstance, cooling of electrode array due to external natural convection on millimeter-scale electrode pads for external wire connection occurs and makes the internal temperature maxima shift from the electrode plane to a bit of distance right above the cross-shaped interelectrode gaps, giving rise to reversal of flow rotation from a typical repulsion-type to attraction-type induction vortex, which is in good accordance with our experimental observations of co-field TWET streaming at frequencies on the order of reciprocal charge relaxation time of the bulk fluid. These results point out a way to make a correct interpretation of out-of-phase electrothermal streaming behavior, which holds great potential for handing high-conductivity analytes in modern microfluidic systems.

In this work, the apparent shear strength at the interface between a bamboo fiber and the surrounding poly(lactic acid) (PLA) matrix is quantified. A method for processing pull-out test samples within a controlled embedded length is proposed and the details of the test procedure are presented, along with a critical discussion of the results. Two series of samples are considered: untreated and mercerized bamboo fibers from the same batch, embedded in the same polyester matrix. Electron and optical microscopy are used to observe the fiber-matrix interface before and after the test, and to identify the failure mode of each sample, especially as regards the occurrence of fibrillation in the fiber bundles. The values of apparent interfacial shear strength are calculated only for regular fibers successfully pulled out from the matrix, and reported with their statistical variations. Mercerization, whose efficiency was proven by Fourier Transform InfraRed (FTIR) spectroscopy, did not appear though to improve the quality of the interface (τ_app = 7.0 ± 3.1 MPa for untreated fibers and τ_app = 5.3 ± 2.4 MPa for treated fibers).

This study investigated dry reforming of methane with combined catalysts supported on γ-Al2O3 support doped with 3.0 wt. % TiO2. The physicochemical properties of all the catalysts were determined by inductively-coupled plasma/mass spectrometry metal analysis, nitrogen physisorption, X-ray diffraction, temperature programmed reduction/desorption, thermogravimetric analysis, and scanning electron microscopy. The addition of CeO2 and MgO to Ni strengthened the interaction between the Ni and the support. The catalytic activity results indicated that the CeO2 and MgO addition to Ni did not do much in retarding carbon deposition, but they improved the activity of the catalysts. Among the tested catalysts, it was found that the catalyst with the composition of 5.0 wt % NiO-10.0 wt % CeO2/3.0 wt %TiO2-γ-Al2O3 resulted in the highest CH4 and CO2 conversion with H2/CO mole ratio close to unity. The optimum reaction conditions in terms of reactant conversion and H2/CO mole ratio were achieved by varying space velocity and CO2/CH4 mole ratio.

The experiment was conducted at livestock research and development station surezai Peshawar during March 2012 to study the effect of cotton seed cake, Lucerne hay supplementation on intake of maize stover and weight gain by male sahiwal bull. Twelve (12) young Sahiwal bull breed, 280 kg average liveweight and 2 years of age were randomly put into 4 groups of 3 animals under intensive feeding system to determine the effect of different protein supplements on growth, and intake of chopped, dried maize stover. A control group was fed stover adlibitum only, and the other groups were fed daily 750 g cottonseed cake/head, 1 kg lucerne hay or 900 g of lucerne/cottonseed cake (66:34; w/w). Significant differences were observed on average daily live weight gains. Animals on lucerne and its mixture registered higher daily gains (243 g) and (330 g) respectively, followed by cottonseed cake (156 g); the control group lost weight (-8.0 g/d). Contrary to the live weight gains, animals fed on lucerne and its mixture had lower maize stover intakes, 3.35 kg DM/animal/day and 3.70 kg DM respectively, while those on cottonseed cake and the control group ingested respectively 4.72 kg DM and 4.16 kg DM maize Stover. It is concluded that during the critical period in the suburb of Peshawar, small-scale farmers can prevent loss in live weight by utilizing simple available rations.

This article focuses on the issue of motor oils used in the engines of off-road mobile machinery (NRMM), more specifically tractors. The primary goal of the paper is to determine the appropriate replacement interval for these oils. The physical properties of the examined samples were first determined by conventional instruments. Furthermore, the concentration of abrasive metals, contaminants, and additive elements were measured using an optical emission spectrometer. Lastly, the content of water, fuel, glycol, and the products of oxidation, nitration, and sulphation were determined by using infrared spectrometry. The measured values were compared to the limit values. Based on the processing and evaluation of these analyses, the overall condition of the oils was assessed and subsequently the optimal exchange interval of the examined oils was determined. In addition, a risk analysis of the outage was performed. Due to the high yields of crops, farmers can lose a significant amount of product when a tractor is not functioning during the harvest period. This loss for calculated in the paper.

The fear of missing out (FoMO) is characterized in the literature as a fear that others are having rewarding experiences while one is missing out, and a constant need to keep connected with one’s social network. Driven by Social Determination Theory (SDT) FoMO has been linked with Problematic Social Networking Sites use (PSNSU), negative affectivity (NA), self-esteem (SE) and sleep disturbances. The present study reports findings from 512 individuals (79.1% women, mean age 30.5 years, SD= 8.61). Structural equation modelling (SEM) suggests that the duration of SNSs use and the numbers of SNSs platforms actively used partially mediated the relationship between FoMO and PSNSU. In turns, PSNSU partially mediated the relationship between FoMO and NA. Furthermore, the present study has extended the literature by incorporating the Vulnerability Model in the FoMO concept, identifying that SE partially mediated the relationship between FoMO and NA, while NA fully mediated the relationship between FoMO and sleeping disturbances. Accordingly, the present has extended previous research findings in showing exercise as a potential protective factor to prevent against FoMO. Practical and theoretical implications are discussed.

This study examines the relationship of fear of missing out (FOMO) with heavy social networking among Turkish university students (aged 17 - 55). The perception of the possible role of parental supervision on online activities is also investigated. Factor analysis of FOMO scale led us to evaluate the construct under two dimensions as (1) fear of missing experience and (2) fear of missing activity. The results revealed that fear of missing activity increases social media intrusion while fear of missing experience is found to have no significant effect. The reverse relationship is also valid: an urge to use social media predicts fear of missing out (activity and experience). Fear of missing experience is associated with problematic social media use (PSMU) and a high desire to use social media. The results additionally demonstrate that students aged 30 and older believe more in the requirement of parental control than those aged 17-22.

The efficiency of cold sheet and strip rolling of steels and non-ferrous metals in the main depends on the quality of the technological lubricant and its cost. In this regard, it is important to develop new compositions of effective metal-working coolants (MWC) having low cost and providing the maximum reduction in the friction coefficient. We developed and tested the new compositions of the MWC on basis of chicken fat, and mono- and diglycerides and their esters of boric acid synthesized from the wastes of sunflower oil production. The MWC were tested in DSEA on laboratory rolling mill 100x100 with a roll diameter of 260 mm during steel 08Kp rolling. The efficiency of the coolants was determined by the factor of metal stretch forming λ and the coefficient of friction μ in the deformation zone which was found by forward slip method. We found the metal-working coolant with 100 % concentration of boric acid esters of mono- and diglycerides is the most effective in steel rolling. Thus the new MWC on basis of boric acid esters of mono- and diglycerides synthesized from the wastes of sunflower oil production can be recommended for use in rolling of structural steels on account of availability, high efficiency, and a low cost.

Open pit mining is a common activity in the Yucatan peninsula for the extraction of limestone. This mining is known under the generic name of quarries, and regionally as sascaberas (sascab=white soil in Mayan language). These areas are characterized by the total removal of the natural vegetation cover and soil in order to have access to the calcareous material. The present study shows the composition and structure of the vegetation in five quarries after approximately ten years of abandonment, and the conserved vegetation near to each one of the quarries in southeastern Quintana Roo. Using a canonical correspondence analysis (CCA), the distribution of the species was determined in relation to the edaphic variables: soil depth, percentage of organic matter (OM), cationic exchange capacity (CEC), pH and texture. 26 families, 46 genera and 50 species were recorded in the quarries and 25 families, 45 genera and 47 species were recorded in the conserved areas. The dominant species in the quarries belong to the families Poaceae, Fabaceae, Rubiaceae and Anacardiaceae. The quarries with higher values of OM (1.63%), CEC (24.05 Cmol/kg), depth (11 cm) and sand percentage (31.33%) include the following species like Lysiloma latisiliquum, Metopium brownei and Bursera simaruba which are commonly found in secondary forests. On the other hand, quarries with lower values of OM (0.39%), CEC (16.58 Cmol/kg) and depth (5.02), and higher percentage of silt (42.44%) were dominated by herbaceous species belonging to the Poaceae family and by Borreria verticillata, which are typical in disturbed areas of southeastern Mexico. In all cases, the pH was slightly alkaline due to the content of calcium carbonate (CaCO3), characteristic of the soils of the region. The edaphic variables are significantly correlated with the development and distribution of vegetation, and with the structure of the communities.

This paper intends to examine whether a company’s policy of dividend would impact or influence the price fluctuation of respective common stock in the designated stock market particularly in Hong Kong. Hence, there are 354 companies in Hong Kong which are all listed company on the Stock Exchange of Hong Kong (HKEX), were chosen as sample data for analysis with their audited financial information ranged from 2001 to 2020. Two proxies, the yield and the ratio of pay-out of dividend were widely adopted for the measurement of the effect of dividend policy and the possible influence on the volatility of respective common stock price by employing two statistical models, which are the model of fixed and random effects to provide accurate regression coefficients. With the results from the model of fixed effects, the yield and the pay-out ratio of dividend have been found statistically associated to the price volatilization of respective common stock in Hong Kong. The statical results in this study also find the yield and the ratio of pay-out of dividend are apparently and negatively associated to the price volatilization of respective common stock in Hong Kong. The research outcomes will be a reference for further study on different variables may have effects or volatilize the price of common stock price particularly in Hong Kong capital market.

An analysis of the performance of Automatic Dependent Surveillance-Broadcast (ADS-B) data received from the Grand Forks, North Dakota International Airport was carried out in this study. The purpose was to understand the vulnerabilities of Universal Access Transceiver (UAT) ADS-B system and recognize the effects on present and future Air Traffic Control (ATC) operation. The Federal Aviation Administration (FAA) mandated all the General Aviation aircraft to be equipped with ADS-B. The aircraft flying within United States and below the transition altitude (18,000 feet) are more likely to install an UAT ADS-B. At present unmanned aircraft systems (UAS) and autonomous air traffic control (ATC) towers are being integrated into the aviation industry and UAT ADS-B is a basic sensor for both class 1 and class 2 Detect and Avoid (DAA) systems. As a fundamental component of future surveillance system, the anomalies and vulnerabilities of ADS-B system need to be identified to enable a fully utilized airspace with enhanced situational awareness. The data received was archived in GDL-90 format, which was parsed into readable data. The anomaly detection of ADS-B messages was based on the FAA ADS-B performance assessment report. The data investigation revealed ADS-B message suffered from different anomalies including drop out; missing payload; data jump; low confident data and altitude discrepancy. Among those studied, the most severe was drop out and 32.49% of messages suffered from this anomaly. Dropout is an incident where ADS-B failed to update within a specified rate. Considering the potential danger being imposed, an in-depth analysis was carried out to characterize message dropout. Three flight parameters were selected to investigate their effect on drop out. Statistical analysis was carried out and Friedman Statistical Test identified that altitude affected drop out more than any other flight parameters.

This work analyzes the severity and risk associated with Automatic Dependent Surveillance-Broadcast (ADS-B) message drop out in Detect and Avoid (DAA) function of Unmanned Aircraft System (UAS). Performance assessment of the Universal Access Transceiver (UAT) ADS-B message implies that in some cases ADS-B fails to update within a specified update interval, which is referred to as drop out in this work. ADS-B is a fundamental surveillance sensor for both class 1 and class 2 DAA systems. Message loss or drop out has been found as one of the common limitations of the ADS-B system. The key feature of this study is incorporating the update rate of real ADS-B data transmitted from the manned aircraft. The data were received from the Grand Forks International Airport, North Dakota. Monte Carlo method has been adopted to resolve encounter scenarios in the presence of drop out. The change in the alert triggered by the UAS DAA in the presence of ADS-B drop out has been investigated. Furthermore, the risk matrices are created to quantify the associated risk with drop out affected alerts. Simulation results depict that both the duration of drop out and DAA look-ahead time affect the alert-triggering function of UAS. With a small look- ahead window and longer duration of drop out, the number of warning alerts increases. Also, alerts are affected more during an overtaking encounter than that of a head-to-head encounter. A system-level analysis is also carried out to recognize the potential reasons behind the ADS-B drop out.

This study have uniquely mad use of Box-Jenkins ARIMA models to address the core of the threes objectives set out in view of the focus to add meaningful value to knowledge exploration. The outcome of the research have testify the achievements of this through successful nine months out-of-sample forecasts produced from the program codes, with indicating best model choices from the empirical estimation. In addition, the results also provide description of risks produced from the uncertainty Fan Chart, which clearly outlined possible downside and upside risks to tourist visitations in the country. In the conclusion, it was suggested that downside risks to the low level tourist arrival can be managed through collaboration between authorities concerned with the management of tourist arrivals in the country.

A controlled ammonia (NH₃) release experiment was performed at a grassland site to quantify the effect of dry deposition, at the field scale between the source and the receptors (NH₃ measurement locations), on the estimates of emission rates by means of inverse dispersion modelling. NH₃ was released for 3 hours at a constant rate of Q = 6.29 mg s⁻¹ from a grid of 36 orifices spread over an area of 250 m². The increase in line-integrated NH₃ concentration was measured with open-path optical miniDOAS devices at different locations downwind of the artificial source. Using a backward Lagrangian stochastic (bLS) dispersion model (bLSmodelR), the fraction of the modelled release rate to the emitted NH₃ (Q_bLS/Q) was calculated from the measurements of the individual instruments. Q_bLS/Q was found to be systematically lower than 1, on average between 0.69 and 0.91, depending on the location of the receptor. We hypothesized that NH₃ dry deposition to grass and soil surfaces was the main factor responsible for the observed depletion of NH₃ between source and receptor. A dry deposition algorithm based on a deposition velocity approach was included in the bLS modelling. Model deposition velocities were evaluated from a ‘big‑leaf’ canopy resistance analogy. Canopy resistances (generally termed Rc) that provided Q_bLS/Q = 1 ranged from 75 to 290 s m⁻¹, showing that surface removal of NH₃ by dry deposition can plausibly explain the original underestimation of Q_bLS/Q. The inclusion of a dry deposition process in dispersion modelling is crucial for emission estimates, which are based on concentration measurements of depositing tracers downwind of homogeneous area sources or heterogeneously distributed hot spots, such as e.g. urine patches on pastures in the case of NH₃.

The lay-up of cross laminated timber (CLT) leads to significant differences in properties over its cross-section. Particularly the out-of-plane shear behavior of CLT is effected by the changes in shear moduli over the cross-section. Results from laboratory shear tests are used to evaluate the shear stiffness of 3- and 5-layer CLT panels in their major and minor strength direction. The results are compared to calculated shear stiffness values on evaluated single-layer properties as well as commonly used property ratios using the Timoshenko beam theory and the shear analogy method. Differences between the two calculation approaches are pointed out. The shear stiffness is highly sensitive to the ratio of the shear modulus parallel to the grain to the shear modulus perpendicular to the grain. The stiffness values determined from two test measurements are compared with the calculated results. The level of agreement is dependent on the number of layers in CLT and the property axis of the CLT panels.

The purpose of this study was to assess the extent to which self-esteem and depression mediated the influence of internalized stigma on life satisfaction among Korean out-of-school youths. Cross-sectional data on 318 youths provided information on perceived stigma, self-esteem, depression, life satisfaction, and personal characteristics. A multinomial logistic regression analysis was followed by structured path analysis to investigate the mediation effects. Internalized stigma was negatively associated with life satisfaction. Self-esteem significantly mediated the influence of stigma on depression and the influence of depression on life satisfaction. Further, stigma directly and significantly influenced depression. This study demonstrated that self-esteem and depression were important to the relationship between internalized stigma and life satisfaction. Implications for possible policies and programs with the aim of helping out-of-school youths to integrate and lead successful satisfying lives are discussed.

Forces and mechanical energy are prevalent in living cells. This may be because forces and mechanical energy preceded chemical energy at life’s origins. Mechanical energy is more readily available in non-living systems than the various other forms of energy used by living systems. Two possible prebiotic environments that might have provided mechanical energy are hot pools that experience wet/dry cycles and mica sheets as they move, open and shut, as heat pumps or in response to water movements.

The present review focuses on recent clinical trials that analyze the efficacy of intravitreal therapeutic agents for the treatment of dry age-related macular degeneration (AMD), such as neuroprotective drugs, and complement inhibitors, also called immunomodulatory or anti-inflammatory. A systematic literature search was performed to identify randomized controlled trials published prior to January 2019. Patients affected by dry AMD treated with intravitreal therapeutic agents were included. The changes in the correct visual acuity and the reduction in geographic atrophy progression were evaluated. Several new drugs have shown some promising results, including those targeting the complement cascade and agents called neuroprotective. The action potential of the two groups of drugs is to block the complement cascade model for immunomodulating agents, and prevent the degeneration and apoptosis of ganglion cells for the neuroprotectors, respectively. To the best of knowledge, and after extensive studies on the matter, there are still many investigations to be carried out on dry AMD in collaboration between researchers. They will have to identify truly effective molecules, understand the practical potential of pluripotent stem cells, and refine gene therapies. Only in-depth clinical trials will be able to allow the most appropriate and personalized treatments for each dry AMD patient.

The experiment was conducted in three locations Jari, Chefa and Sirinka of Eastern Amhara to select the best performing varieties, in terms of biomass yield, chemical composition, haulm yield, seed yield and other agronomic characteristics of Glycine max (L.) Merrill grown under the rain- fed condition of lowland areas of Eastern Amhara in a randomized complete block design with tree replications. Twelve released soybean varieties were Afgat ,Belesa-95, Boshe , Cheri , Dhidhessa, Gishama , Gizo, Korme, Pawe-03, katta, Wegayen and Wollo were used as a treatments. The seeds were planted in 40 cm between rows and 10 cm between plants on a plot size of 3.2m*4m. Spacing between blocks and plots were 1 and 0.5m, respectively. The seed rate was 60 kg/ha and a fertilizer rate 100 kg/ha NPS was applied during seed planting. The combined analysis of variance over two years at location Jari for dry matter yield of varieties Afgat, Gizo, Pawe-03, Wogayen and Wollo were significantly higher as compared to other soybean varieties. The combined analysis across locations at Jari and Sirinka (2019-second year) showed that varieties Afgat, Gishama, Gizo, Pawe-03, Wogayen and Wollo had higher dry matter yield and varieties Gishama (3.97 t/ha), Gizo (3.60 t/ha), Pawe-03 (4.04 t/ha) and Wogayen (3.36 t/ha) had higher haulm yield as compared with other varieties. The combined analysis across locations at Jari and Sirinka (2019) showed that varieties Pawe-03(2951 kg/ha), Gizo (2862 kg/ha), Afgat (2859 kg/ha), Gishama (2654 kg/ha),Wollo (2461 kg/ha) and Wogayen (2404 kg/ha) had higher seed yield as compared with other varieties. The variety Wollo gave higher crud protein content in two locations (Jari and Sirinka) .Therefore, varieties Afgat, Pawe-03 and Wollo were recommends for the given areas of Jari , Chefa, Sirinka and could be produced in similar environments for the best of produced optimal amount of dry matter, haulm and seed yield and good protein supplement for production of ruminants.Thus, further researches will be needed to investigate on the utilization of livestock.

Consumer demands for new sensory experiences have driven the research of unconventional yeasts in beer. While much research exists on the use of various common Saccharomyces cerevisiae strains as well as non-Saccharomyces yeasts, there exists a gap in knowledge regarding other non-cerevisiae Saccharomyces species in the fermentation of beer, outside that of S. pastorianus. Here, five distinct species of Saccharomyces from the UC Davis Phaff Yeast Culture Collection, as well as one interspecies hybrid from Fermentis, were chosen to ferment 40 L pilot scale beers. S. kudriavzevii, S. mikatae, S. paradoxus, S. bayanus, and S. uvarum yeasts were fermented in duplicate, with one fermenter in each pair receiving 10 g/L dry-hop during fermentation. Analytical measurements were made each day of fermentation and compared to controls of SafAle US-05 and SafLager W 34/70 for commercial brewing parameters of interest. Finished beers were also analyzed for aroma, taste, and mouthfeel to determine the flavor of each yeast as it pertains to brewing potential. All beers exhibited spicy characteristics, likely from the presence of phenols; dry-hopping increased fruit notes while also increasing perceived bitterness and astringency. All of the species in this study displayed great brewing potential, and might be an ideal addition to beer depending on a brewery’s desire to experiment with flavor and willingness to bring a new yeast into their production environment

Background: Inadequate meibomian glands (MGs) secretion can lead to dry eye signs and symptoms. Tear film lipid layer (TFLL) secreted by MGs protects and prevents rapid evaporation of tear film. Our purpose was to assess TFLL alteration and function in patients with evaporative dry eye (EDE) using tear interferometry after optimal pulse light technology (OPT) intense pulsed light (IPL). Methods: This prospective randomized examiner-masked sham- controlled study included 86 participants (142 eyes) with DED. IPL or sham procedure was performed on day 0, 21, and 42. Ocular Surface Disease Index (OSDI), non-invasive breakup time (NITBUT), interferometric fringe pattern determined TFLL quality, fluorescein staining (FS), and meibum gland (MG) were assessed at day 0, 21, 42 and 3-month. Results: At 3-month, TFLL, NITBUT, MG drop-out, MG quality, MG expressibility, FS and OSDI improved significantly (P<0.05) in the IPL group, while the sham group had no significant improvements. All DE parameters significantly correlated with the improvement in TFLL following IPL treatment. Additionally, artificial tears usage was significantly less in the IPL group from D-42 onwards. Conclusion: IPL treatment demonstrated the ability to improve TFLL quality and clinically reduced sign and symptoms of DED thereby reducing the frequency of artificial tears usage.

It is known that the elastic characteristics of polyamides change with increasing temperature, in particular, the Young's modulus decreases significantly. This fact is practically not taken into account in design calculations of metal-polymer plain (MP) bearings, operating under conditions of the boundary and dry friction. The purpose of the study is the analysis of the effect of temperature on the change of the Young's modulus and, accordingly, the contact strength and triboresource according to the developed method of calculating MP bearings. MP bearings with a bushing made of polyamide PA6 reinforced with glass or carbon dispersed fibers were investi-gated. Quantitative and qualitative regularities of change of the maximum contact pressures and resource of the bearings at temperature increase under conditions of boundary and dry friction are established. The pressures in the bearing bushing made of PA6+30GF will be lower than for the bushing made of PA6+30CF. The resource of the bushing made of PA6+30CF will be significantly greater than for PA6+30GF. For thermoplastic polymers, the increase in temperature will have a useful practical effect due to the decrease in the rigidity of the polymer composites of the bearing bushing.

Biomarkers have the potential to aid in the study of Alzheimer’s disease (AD); unfortunately, AD biomarker values often have a high degree of overlap between healthy and AD individuals. This study investigates the potential utility of a series of novel AD biomarkers, the sixty second ¹²⁹Xe retention time, and the xenon washout parameter, based on the washout of hyperpolarized ¹²⁹Xe from the brain of AD participants following inhalation. The xenon washout parameter is influenced by cerebral perfusion, T1 relaxation of xenon, and the xenon partition coefficient, all factors influenced by AD. Participants with Alzheimer’s disease (n=4) and healthy volunteers (n=4) were imaged using hyperpolarized ¹²⁹Xe magnetic resonance imaging (MRI) and magnetic resonance spectroscopy (MRS) to determine the amount of retain xenon in the brain. At 60 sec post breath hold, AD patients retained significantly higher amounts of ¹²⁹Xe compared to healthy controls. Data was fit to a pharmacokinetic model and the xenon washout parameter was extracted. Xenon washout in white and grey matter occurs at a slower rate in Alzheimer’s participants (¹²⁹Xe half-life time of 42s and 43s, respectively) relative to controls (20s and 16s, respectively). Following larger scale clinical trials for validation, the xenon washout parameter has the potential to become a useful biomarker for the support of an AD diagnosis.

Low pasture biomass production and fodder scarcity are among the major challenges affecting productivity of dairy cattle farms in Sri Lanka. As a potential solution to this, two Napier hybrid cultivars CO-5 and Sampoorna were recently introduced and a field experiment was conducted to evaluate their growth, dry matter production and nutritional composition during May to September 2020. Plant measurements and samples were collected at five harvest intervals (4, 6, 8, 10 and 12 weeks after planting), with the plant samples subjected to biomass and nutritional assessments. The number of tillers and leaf length differed (P=0.01) between the two cultivars at 4 weeks harvesting interval (HI) whilst number of leaves differed at 12 HI respectively. Dry matter yield increased (P=0.16) almost linearly whilst crude protein declined exponentially with CO-5 greater than Sampoorna (P=0.057; 9.3% vs 8.7%), with increasing harvesting intervals respectively. In-vitro Organic Matter Digestibility and In-vitro Metabolizable Energy contents were similar across weeks 4, 6 and 8 but then decreased. This study demonstrates that higher dry matter yields (12.54 t/ha) can be obtained by harvesting both cultivars at 12 HI, but from a nutritional perspective harvesting at 6 HI during Yala season of the year would be optimum for farmers.

We consider the maximum entropy Markov chain inference approach to characterize the collective statistics of neuronal spike trains, focusing on the statistical properties of the inferred model. We review large deviations techniques useful in this context to describe properties of accuracy and convergence in terms of sampling size. We use these results to study the statistical fluctuation of correlations, distinguishability and irreversibility of maximum entropy Markov chains. We illustrate these applications using simple examples where the large deviation rate function is explicitly obtained for maximum entropy models of relevance in this field.

This paper presents a hypothesis about the origins of life in a clay mineral, starting with the earliest molecules, continuing through the increasing complexity of the development, in neighboring clay niches, of “Metabolism First,” “RNA World,” and other necessary components of life, to the encapsulation by membranes of the components in the niches, to the interaction and fusion of these membrane-bound protocells, resulting finally in a living cell, capable of reproduction and evolution. Biotite (black mica) in micaceous clay is the proposed site for this origin of life. Mechanical energy of moving biotite sheets provides one endless source of energy. Potassium ions between biotite sheets would be the source of the high intracellular potassium ion concentrations in all living cells.

Dry eye disease (DED) is one of the most common eye diseases. There is at least one DED patient in almost every five people. AI-based research methods increasingly become the focus of DED diagnosis research. This study utilizes a systematic review method on DED AI-based diagnosis. 2112 unduplicated records are extracted from Google Scholar, Web of Science (WOS), PubMed, China National Knowledge Infrastructure (CNKI), and Scopus databases. The most contributed countries, institutions, authors, journals, references, and disciplines are recognized. Keyword distribution and hot topics are identified. Popular databases of ophthalmic images, videos, and electronic demographic medical records are discussed. The DED diagnosis, classification, and grading criteria are identified. The major diagnosing methods are clustered, compared, and investigated. Findings show that diagnosing method research could be classified into three categories based on the relationship between AI techniques, which are (1) ground truth and/or comparable standards for AI DED diagnosis (TBUT, S Ⅰ T, TMH, and OSDI), (2) potential methods for AI-based methods have a great advantage(DED detection based on meibometry Images, CASPs, IVCM Images, OCT Images, blink videos and ultrasonic imaging), (3) and the potential direction and supplemented methods for AI-based DED detection (DED detections based on tear osmolarity, proteomic analysis, TCM and demographic information). AI-based approaches based on digital ophthalmologic images play an important role in early screening. Challenges and future perspectives are discussed at the end of this article, academically and practically.

Auto checkout has received more and more attention in recent years and this system automatically generates a shopping bill by identifying the picture of the products purchased by the customers. However, the system is challenged by the domain adaptation problem, where each image of the training set contains only one commodity, whereas the test set is a collection of multiple commodities. The existing solution to this problem is to resynthesize the training images to enhance the training set. Then the composite images are rendered using CycleGAN to make the image distribution of the training set and the test set more similar. However, we find that the detection boxes given by the ground truth of the common dataset contain a large part of the background area, the area will affect the training process as noise. To solve this problem, we propose a mask data priming method. Specifically, we redo the large scale Retail Product Checkout (RPC) dataset and add segmentation annotation information to each item in the training set image based on the original dataset using pixel-level annotation. Secondly, a new network structure is proposed in which we train the network using joint learning of detectors and counters, and fine-tune the detection network by filtering out suitable images from the test set. Experiments on the RPC dataset have shown that our method yields better results. we used an approach that reached 81.87% compared to 56.68% for the baseline approach which demonstrates that pixel-level information helps to improve the detection results of the network.

Purpose: To evaluate seasonal variation in intra-ocular pressure (IOP) with and without short tear break-up time (SBUT, BUT ≤ 5 s). Methods: This study enrolled 176 patients who visited one of six eye clinics in Japan for IOP measurement at every season. The mean patient age was 67.9 years, including 79 males. We compared the seasonal variation in IOP (mean ± SD) across spring (Mar-May), summer (Jun-Aug), fall (Sep-Nov), and winter (Dec-Feb). Results: The IOP (mmHg) in winter and summer, respectively, was 12.8 ± 3.7 and 12.8 ± 3.1 for non-glaucoma patients without SBUT (n = 47, P = 0.964), 14.8 ± 3.4 and 13.3 ± 3.4 for non-glaucoma patients with SBUT (n = 57, P < 0.001), 14.3 ± 3.2 and 14.1 ± 3.4 for glaucoma patients without SBUT (n = 36, P = 0.489), and 13.3 ± 3.0 and 11.6 ± 2.9 for glaucoma with SBUT (n = 36, P < 0.001). Seasonal variation was largest across the seasons in the glaucoma with SBUT group, and the magnitude of seasonal variation correlated with BUT (β = 0.228, P = 0.003). Conclusions: Seasonal variation tended to be larger in patients with SBUT than those without SBUT.

Increased screen time during the COVID-19 pandemic and the accelerated incorporation of technology into daily practices have directly contributed to the increased prevalence of eye disease. The human eye is not built for continual technological use and must adjust to exposure to digital screens. Overexposure to technology can result in eye strain and an increased risk of eye diseases such as myopia with complications later in life, including retinal tears, cataracts, and macular degeneration. As vision and ocular diseases become more prevalent, the study of eye diseases, including their causes and treatments, is especially relevant. There is a need to prevent ocular diseases before they become a burden to individuals, their families, and their communities by better understanding the pathophysiology of ocular diseases. Several ocular diseases are thought to be caused by imbalances in reactive oxygen species (ROS) and autophagy. ROS refers to a class of highly reactive oxygen-containing molecules that can undergo damaging reactions with other molecules in the cell. Autophagy is a cellular process of self-eating whereby damaged, harmful, or dead material in cells is broken down to maintain cellular homeostasis. This paper discusses the role of ROS and autophagy in the pathogenesis of computer vision syndrome (CVS), digital eye strain (DES), myopia, cataracts, glaucoma, diabetic retinopathy (DR), age-related macular degeneration (AMD), optic nerve crush injury (OCN), optic nerve gliomas, and retinoblastoma. Lifestyle changes such as limiting screen time, ensuring adequate exposure to evening sunlight, and using blue light protection measures or protective eyewear are important in the prevention of eye disease. Nutrition also contributes significantly to eye health. A balanced diet rich in vitamins and antioxidants may help to prevent ROS and autophagy imbalance-induced eye disease. Medical and surgical treatments become necessary when preventative measures fail. This paper also addresses how government measures to decrease the onset of eye disease, including targeted programs to increase access to fresh vegetables and fruits in food deserts, are a critical macro-level avenue to reduce eye disease prevalence in the US, which according to the National Eye Institute, costs $139 billion yearly.

Corn fiber is a co-product of commercial ethanol dry-grind plants, which is processed into distillers dried grains with solubles (DDGS) and used as animal feed, yet it holds high potential to be used as feedstock for additional ethanol production. Due to the tight structural make-up of corn fiber, a pretreatment step is necessary to make the cellulose and hemicellulose polymers in the solid fibrous matrix more accessible to the hydrolytic enzymes. A pretreatment process was developed in which whole corn kernels were soaked in aqueous solutions of 2.5, 5.0, 7.5 and 10.0 wt% ammonia at 105oC for 24 h. The pretreated corn then was subjected to a conventional mashing procedure and subsequently ethanol fermentation using a commercial strain of natural Saccharomyces cerevisiae with addition of a commercial cellulase. Pretreatment of the corn with 7.5 wt% ammonia solution plus cellulase addition gave highest ethanol production, which improved the yield in fermentation using 25 wt% solid from 334 g ethanol/kg corn obtained in the control (no pretreatment and no cellulase addition) to 379 g ethanol/kg corn (a 14% increase). The process developed can potentially be implemented in existing dry-grind ethanol facilities as a “bolt-on” process for additional ethanol production from corn fiber, and this additional ethanol can then qualify as “cellulosic ethanol” by the EPA’s Renewable Fuels Standard and thereby receive RINS (Renewable Identification Numbers).

In extant biology, biopolymers perform multiple crucial functions. The biopolymers are synthesized by enzyme-controlled biosystems that would not have been available at the earliest stages of chemical evolution and consist of correctly sequenced and/or linked monomers. Some of the abiotic “messy” polymers approximate some functions of biopolymers. Condensation polymers are an attractive search target for abiotic functional polymers since principal polymers of life are produced by condensation and since condensation allows for the accurate construction of high polymers. Herein the formation of hyperbranched polyesters that have been previously used in the construction of enzyme-like catalytic complexes is explored. The experimental setup compares between the branched polyesters prepared under mild continuous heating and the wet-dry cycle conditions. The results reveal that period wetting during which partial hydrolysis of the polyester occurs, helps control the chain growth and retards the gel transition. It is significant to the origin of life studies that environmental, prebiotically plausible conditions could achieve such control without enzymes or a skilled chemist. As expected in marginally controlled systems, the identification of each component of the heterogeneous system has proved challenging, but it is not crucial for drawing the conclusions.

The outbreak of COVID-19 in 2020 caused significant disruptions to global shipping and the world economy. This paper aims to investigate the impact of the pandemic on global shipping by analyzing the Baltic Dry Index (BDI). The BDI is a metric that reflects the worldwide shipping costs and directs related to supply and demand conditions, making it an indicator of economic production. The study utilizes data from 2019 to 2021, before and after the outbreak of COVID-19, and considers 13 independent variables, including raw materials, energy, stock market indexes, global port calls, and confirmed COVID-19 cases to investigate how to influent the BDI. The study employs stepwise regression to select variables and build models before and after the pandemic. The findings reveal that the key factors affecting the freight index BDI before the outbreak are: international scrap steel prices, iron ore prices, and the Commodity Research Bureau Index. However, after the COVID-19 outbreak, the factors affecting the BDI changed to the Shanghai Index, global port calls, and the number of confirmed COVID-19 cases.

Elevated levels of oxidative stress in the corneal epithelium contribute to the progression of dry eye disease pathology. Previous studies have shown that antioxidant therapeutic intervention is a promising avenue to reduce disease burden and slow disease progression. In this study, we evaluated the pharmacological efficacy of Xanthohumol in preclinical models for dry eye disease. Xanthohumol is a naturally occurring prenylated chalconoid that promotes the transcription of phase II antioxidant enzymes. Xanthohumol exerted a dose-response in preventing tert-butylhydroxide-induced loss of cell viability in human corneal epithelial (HCE-T) cells and resulted in a significant increase in expression of nuclear factor erythroid 2-related factor 2 (Nrf2), the master regulator of the endogenous antioxidant system. Xanthohumol-encapsulating poly(lactic-co-glycolic acid) nanoparticles (PLGA NP) were cytoprotective against oxidative stress in vitro, and significantly reduced corneal fluorescein staining in the mouse desiccating stress/ scopolamine model for dry eye disease in vivo by reducing oxidative stress-associated DNA damage in corneal epithelial cells. PLGA NP represent a safe and efficacious drug delivery vehicle for hydrophobic small molecules to the ocular surface. Optimization of NP-based antioxidant formulations with the goal to minimize instillation frequency may represent future therapeutic options for dry eye disease and related ocular surface disease.

This investigation was conducted to determine the chemical composition and nutritional value of five plant species commonly used as ruminant feeds namely: Artemisia herba-alba, Acer monspessulanum, Amygdalus lycoides, Amygdalus scoparia, and Atriplex leucoclada. After the collecting samples, the chemical compositions of plants included dry matter (DM), organic matter (OM), crude protein (CP), ether extract (EE), ash (CA), cell wall (NDF), and non-lignin cell wall (ADF) were determined according to standard methods. For degradation testing, the nylon bag technique was applied using three native Sistani fistula calves. Organic matter digestibility (OMD) and metabolisable energy (ME) were determined through the gas production technique. The CP value ranged from 5.30 (Amygdalus scoparia) to 11.72% (Atriplex leucoclada) while NDF value ranged from 52.62 (Amygdalus lycoides) to 69.05% (Amygdalus scoparia). The range of OMD, DOMD, and ME was from 36.67 to 53.27%, 34.67 to 49.11%, and 5.57 to 8.08 (MJ/kg), respectively. The results showed a positive correlation between cell wall composition and dry matter digestibility in plant species. The nutritional value of Amygdalus lycoides, Atriplex leucoclada, Acer monspessulanum, and Artemisia herba-alba was acceptable composition and digestibility.

Pure orbital blowout fractures occur within the confines of the internal orbital wall. Restoration of orbital form and volume is paramount to prevent functional and esthetic impairment. The anatomical peculiarity of the orbit has encouraged surgeons to develop implants with customized features to restore its architecture. This has resulted in worldwide clinical demand for patient-specific implants (PSIs) designed to fit precisely in the patient's unique anatomy. Fused filament fabrication (FFF) three-dimensional (3D) printing technology has enabled the fabrication of implant-grade polymers such as Polyetheretherketone (PEEK), paving the way for a more sophisticated generation of biomaterials. This study evaluates the FFF 3D printed PEEK orbital mesh customized implants with a metric considering the relevant design, biomechanical, and morphological parameters. The performance of the implants is studied as a function of varying thicknesses and porous design constructs through a finite element (FE) based computational model and a decision matrix based statistical approach. The maximum stress values achieved in our results predict the high durability of the implants, and the maximum deformation values were under one-tenth of a millimeter (mm) domain in all the implant profile configurations. The circular patterned implant (0.9 mm) had the best performance score. The study demonstrates that compounding multi-design computational analysis with 3D printing can be beneficial for the optimal restoration of the orbital floor.

Dry eye disease (DED) is a multifactorial disorder in which tear fluid homeostasis is lost, resulting in increased tear film osmolarity and ocular surface irritation. In Asia, the short tear film breakup time type-DED is common, and stabilization of the tear film is the first goal of treatment. Treatment of DED begins with eye drops. Until now, artificial tears and steroid eye drops have been the main treatment for DED. However, artificial tears require frequent administration of eye drops and thus pose adherence problems, while steroids have problems with side effects (cataracts, increased intraocular pressure). This review evaluates the new generation of DED therapies in Asia based on what is known about them and demonstrates that they are more effective for DED than traditional therapies such as artificial tears and steroids. Based on these considerations, it is proposed that the optimal treatment for DED in Asia is the initial application of mucin secretion enhancing eye drops (long-acting diquafosol) and oral supplements, and if additional treatment is needed, cyclosporine eye drops and the adjunctive therapies presented in this review are added.

The emergence of cloud computing, big data analytics, and machine learning has catalysed the use of remote sensing technologies to enable more timely land management of sustainability indicators such as ground cover and grassland biomass, given the uncertainty of future climate and drought conditions. Here, we examine the potential of “regenerative agriculture”, as an adaptive grazing management strategy to minimise bare ground exposure while maximising pasture biomass productivity. High-intensity sheep grazing treatments were conducted in small fields (less than 1 hectare) for short durations (typically less than 1 day). Paddocks were subsequently spelled to allow pasture biomass recovery (treatments comprising 3, 6, 9, 12, and 15 months) with each compared with control treatments with lighter stocking rates for longer periods (2,000 DSE). Pastures were composed of wallaby grass (Austrodanthonia species), kangaroo grass (Themeda triandra), Phalaris (Phalaris aquatica, and cocksfoot (Dactylis glomerata) were destructively sampled to estimate total standing dry matter (TSDM), standing green biomass, standing dry biomass and trampled biomass. We then invoked a machine learning model using Sentinel-2 imagery to quantify TSDM, standing green biomass and standing dry biomass. Faced with La Nina conditions, regenerative grazing did not significantly impact pasture productivity, with all treatments showing similar TSDM and green biomass. However, regenerative treatments significantly impacted litter fall and trampled material, with the high intensity grazing treatments causing more dry matter trampling, increasing litter, enhancing decomposition rates and surface organic matter. Pasture digestibility was greatest for treatments with minimal spelling (3 months), whereas both standing senescent and trampled material were significantly greater for the treatment with 15-month spell periods. Estimates of TSDM using machine learning with Sentinel-2 imagery underestimated TSDM in treatment plots but explained spatiotemporal variability associated within and across treatments. The root mean square error between the measured and modelled TSDM was 903 kg DM/ha, which was less than the variability measured in the field. We conclude that regenerative grazing with short recovery periods (3-6 months) are most conducive to increasing pasture production under high rainfall conditions, and we speculate that high intensity grazing is likely to positively impact on soil organic carbon through increased litterfall and trampling. Our study paves the way forward for using machine learning with satellite imagery to quantify pasture biomass at small scales, enabling management of pastures from afar.

Most smallscale farmers still use the traditional way of agricultural crop farming, and relay mostly use of chemical fertilizers (CF). Recently CF have become expensive and could in some way have a negative impact on soil quality after long term application. However, co-application of biogas slurry (BGS) with CF could help reduce farming costs while improving dry matter yields, grain yields, primary macronutrient uptake of (Nitrogen) N, (Phosphorus) P, (Potasium) K, (Calcium) Ca and (Magnesium) Mg and soil concentration of pH, (organic carbon) OC, N, P, K, Ca and Mg after crop harvest. The study was a field experiment conducted in 2016-2017 and 2017-2018 growing seasons. The field experiment was arranged in a randomized complete block design with four replicates. The treatments were based on percentages of recommended N rates of 120 kg N ha-1 for maize production. The BGS/CF treatments were (i) 0/0, (ii) 0/120, (iii) 24/96, (iv) 48/72, (v) 72/48, (vi) 96/24, (vii) 120/0 kg N ha-1. The spreading of the combination of BGS/CF treatments was performed by hand and incorporated into the top soil (0-10 cm) in each experimental plots. BGS/CF (48/72) treatment resulted into higher dry matter yield in 2016-2017, which was higher than all other treatment combinations, while in the 2017-2018 season, treatment of (0/120) resulted into higher dry matter than all other treatment combinations. The 48/72 and 0/120 treatments resulted into similar grain yield in 2016-2017 season which were higher than all other treatments. Treatments of 48/72, 72/48 and 120/0 had higher N, P, K, Ca and Mg uptake than 0/0, 0/120, 24/96 and 96/24 treatments in both seasons. Soil pH, total N, K, and Mg were high from the treatment of (120/0) than all other treatments in 2016-2017 while in the 2017-2018 season, treatment of (48/72) had higher OC, P and K after maize harvest. The findings of his study show that co-application of BGS/CF at 48/72 and 72/48 have maize yield benefits compared to the two resources, BGS/CF (120/0) and BGS/CF (0/120), applied separately in soil especially in the arid and semi-arid regions.

The current SARS-CoV-2 pandemic is still threatening humankind. Despite first successes in vaccine development and approval, no antiviral treatment is available for COVID-19 patients. The success is further tarnished by the emergence and spreading of mutation variants of SARS-CoV-2, for which some vaccines are not effective anymore. This highlights the urgent need for antiviral therapies even more. This article describes how the Genome-Scale Metabolic Model (GEM) of the host-virus interaction of human alveolar macrophages and SARS-CoV-2 was refined by incorporating the latest information about the virus’s structural proteins and the mutant variants B.1.1.7 and B.1.351. We confirmed the initially identified guanylate kinase as a potential antiviral target with this refined model and identified further potential targets from the purine and pyrimidine metabolism. The model was further extended by incorporating the virus’ lipid requirements. This opened new perspectives for potential antiviral targets in the altered lipid metabolism. Especially the phosphatidylcholine biosynthesis seems to play a pivotal role in viral replication. The guanylate kinase is even a robust target in all investigated mutation variants currently spreading worldwide. These new insights can guide laboratory experiments for the validation of identified potential antiviral targets. Only the combination of vaccines and antiviral therapies will effectively defeat this ongoing pandemic.

The purpose of this study is to improve the performance of walls under out-of-plane loads, particularly when subjected to the hammering action of the floors. The idea behind the paper is to provide the masonry walls with a device that behaves like a buttress, without having to build a traditional buttress. The solution presented here consists of a mechanical coupling between the three-dimensional net of steel ribbons of the CAM system and the CFRP strips. Since the steel ribbons of the CAM system have a pre-tension, the mechanical coupling allows the steel ribbons to establish a semi-rigid transverse link between the CFRP strips bonded on two opposite sides of a wall. Therefore, two vertical CFRP strips tied by the steel ribbons behave like the flanges of an I-beam and the flexural strength of the ideal I-beam counteracts the out-of-plane displacements of the wall. The experimental results showed that the combined technique inherits the strong points of both constituent techniques: the delamination load is comparable to that of the specimens reinforced with the CFRP strips and the overall behavior is ductile as for the specimens reinforced with the CAM system. They also allowed us to design a more performing combined technique.

Adaptable or adapted? Whether it is a question of physical, biological or even economic systems, this problem arises when all these systems are the location of matter and energy conversion. To this interdisciplinary question we propose a theoretical framework based on the two principles of thermodynamics. Considering a finite time linear thermodynamic approach, we show that non-equilibrium systems operating in quasi-static regime are quite deterministic as long as boundary conditions are correctly defined. The Novikov-Curzon-Ahlborn approach [1,2] applied to non-endoreversible systems then makes it possible to precisely determine the conditions for obtaining characteristic operating points. As a result, power maximization principle (MPP), entropy minimization principle(mEP), efficiency maximization, or waste minimization states are only specific modalities of system operation. We show that boundary conditions play a major role in defining operating points because they define the intensity of the feedback that ultimately characterizes the operation. Armed with these thermodynamic foundations, we show that the intrinsically most efficient systems are also the most constrained in terms of controlling the entropy and dissipation production. In particular, we show that the best figure of merit necessarily leads to a vanishing production of power. On the other hand, a class of systems emerges which, although they do not offer extreme efficiency or power, have a wide range of use and therefore marked robustness. It therefore appears that the number of degrees of freedom of the system leads to an optimization of the allocation of entropy production.

Current dry powder formulations for inhalation deposit a large fraction of their emitted dose in the upper respiratory tract where they contribute to off-target adverse effects and variability in lung delivery. The purpose of current study is to design a new formulation concept that more effectively targets inhaled dry powders to the large and small airways. The formulations are based on adhesive mixtures of drug nanoparticles and nanoleucine carrier particles prepared by spray drying of a co-suspension of leucine and drug particles from a nonsolvent. The physicochemical and aerosol properties of the resulting formulations are presented. The formulations achieve 93% lung delivery in the Alberta Idealized Throat model that is independent of inspiratory flow rate and relative humidity. Largely eliminating URT deposition with a particle size larger than solution pMDIs is expected to improve delivery to the large and small airways, while minimizing alveolar deposition and particle exhalation.

This study aims to introduce out of school activities (OSA) to high school PJOK teachers in Padang Pariaman District, West Sumatra Province, Indonesia. As is known, OSA is an alternative for students in fulfilling their movement needs, especially during the COVID 19 pandemic. Currently, students mostly stay at home, such as studying from home, to doing activities from home. So that there is minimal possibility of carrying out the movement activities recommended by WHO. The research method used is action research. This method gets a problem, then arranges problem-solving, conducts treatment, and finally evaluates. The research results show no teachers who have ever carried out of school activities (OSA); understanding, implementation, and evaluation are also not understood by the teachers. After being given the treatment, the teachers became more aware and understood about out of school activities, starting from understanding, implementing to evaluating what had to be done.

As is well known, the main contribution of the FRP strips to the strength of load-bearing walls is an improvement in the in-plane strength. This paper deals with the possibility of applying the FRP strips in way to modify the strengthening mechanism of the FRP reinforcing system, from an in-plane to an out-of-plane strengthening mechanism. In order to achieve this goal, a second reinforcement system – derived from the CAM system (Active Confinement of Masonry) – provides connections between the FRP strips placed on the opposite sides of the wall. This new strengthening technique – called the straps/strips technique – establishes a stiffness constraint that forces the opposing FRP strips to behave like two flanges of an FRP I-beam embedded in the wall. Consequently, the use of FRP strips also improves the flexural strength of the wall. The present paper briefly summarizes the results obtained in previous works with the straps/strips technique and proposes an improvement of this strengthening technique, based on some weak-points emerged in the early experimentations. The paper also shows the results of a further experimental test, performed with the improved straps/strips technique. Finally, the similarity between FRP strips with transversal connection and concrete wythes of a sandwich panel with flexible connectors leads to interpret the behavior of the ideal I-beam in terms of composite action established between the FRP strips. This paves the way for analytical modeling of the straps/strips technique.

This study aimed to investigate the airborne release of N-nitrosodimethylamine (NDMA) as a result of the dry heat cooking of some meats using charcoal grilling and pan broiling methods. Three types of meat, beef sirloin, pork belly, and duck, were chosen and cooked in a temporary building using the above methods. Air samples were collected in Thermosorb-N cartridges, which were qualitatively and quantitatively analyzed for NDMA using ultra-high performance liquid chromatography–mass spectrometry and high-performance liquid chromatography–fluorescence detection, respectively. Overall, the charcoal grilling method showed higher average NDMA concentrations than the pan broiling method for all types of meat. The highest average concentration was observed for charcoal-grilled beef sirloin (410 ng/m3) followed by pork belly, suggesting that meat protein content and cooking duration are important determinants of NDMA formation. Cancer risk assessment showed that the charcoal grilling of such meats can pose an additional cancer risk for restaurant customers.

Knowing, with reasonable accuracy, the dry matter (DM) content of Hass avocado fruit will help determine when the fruit must be harvested. The reliability of predictive models based on near infrared spectra for DM quantification depends on the ability of the spectra to be representative of the DM gradient within a whole fruit. The aim of this work was to develop a methodology to determine the optimum number of spectra to develop a robust model for DM content quantification. Three spectra were recorded for each zone of the intact fruit: peduncle, equator, and base. Each scanning point was sampled, and the DM content was determined using oven drying. Two-way ANOVA confirmed the DM gradient within the whole fruit. This gradient was observed within spectra using the RMS (root mean square) criterion and PCA. The PLS models showed that at least one spectrum per zone could be enough to construct an efficient and robust model for dry matter quantification.

The concept of out-of-time-ordered correlation (OTOC) function is treated as a very strong theoretical probe of quantum randomness, using which one can study both chaotic and non-chaotic phenomena in the context of quantum statistical mechanics. In this paper, we define a general class of OTOC, which can perfectly capture quantum randomness phenomena in a better way. Further we demonstrate an equivalent formalism of computation using a general time independent Hamiltonian having well defined eigenstate representation for integrable supersymmetric quantum systems. We found that one needs to consider two new correlators apart from the usual one to have a complete quantum description. To visualize the impact of the given formalism we consider the two well known models viz. Harmonic Oscillator and one dimensional potential well within the framework of supersymmetry. For the Harmonic Oscillator case we obtain similar periodic time dependence but dissimilar parameter dependences compared to the results obtained from both microcanonical and canonical ensembles in quantum mechanics without supersymmetry. On the other hand, for one dimensional potential well problem we found significantly different time scale and the other parameter dependence compared to the results obtained from non-supersymmetric quantum mechanics. Finally, to establish the consistency of the prescribed formalism in the classical limit, we demonstrate the phase space averaged version of the classical version of OTOCs from a model independent Hamiltonian along with the previously mentioned these well cited models.

Communication, compression of information, transmission of information through noisy channels, interconnecting different information systems, cryptography, gate construction –– these areas all depend on classical information theory. We show that, in classical terms, semantic aspects of communication are not at all irrelevant to the engineering problem, contrary to Shannon, and affect the message intended to be transmitted. This is revisited and captured by an analogy to trust, in that they are essential to the channel (for proper use), but cannot be transferred (under risk of flaws) through that same channel. Information is also described by, at least, a tri-state system — not by binary logic. The trust analogy semantics can be coded as the Curry-Howard relationship, connecting computer code with structural logic, by way of different categories. Two-state and Boolean logic (aka Shannon semantics) was used classically before, with Shannon theory, but without trust analogy semantics – found to be a sine qua non condition. This is now familiar in classical gate construction with physical systems with, e.g., Verilog and SystemVerilog. The applications to computation and quantum theory are further explored. The most fundamental entity in today`s theory of information is proposed to use at least three logical states, not bits, in all applications, including: cyber-physical systems, devices, in computation, and in quantum theory.

The term STODS (Surgical Temporary Ocular Discomfort Syndrome) has been coined to describe the ocular surface perturbations induced by surgery. As one of the most important refractive elements of the eye, Guided Ocular Surface and Lid Disease (GOLD) optimization is fundamental to success in achieving refractive outcomes and mitigating STODS. Effective GOLD optimization and the prevention/treatment of STODS, requires an understanding of the molecular, cellular and anatomic factors that influence ocular surface microenviroment and the associated perturbations induced by surgical intervention. By reviewing the current understanding of STODS etiologies, we will attempt to outline a rationale for a tailored GOLD optimization depending on the ocular surgical insult. With a bench to bedside approach, we will highlight clinical examples of effective GOLD perioperative optimization can mitigate STODS deleterious effect on preoperative imaging and postoperative healing.

Intracellular potassium concentrations, [K+], are high in all types of living cells, but the origins of this K+ are unknown. The simplest hypothesis is that life emerged in an environment that was high in K+. One such environment is the spaces between the sheets of the clay mineral, mica. The best mica for life’s origins is the black mica, biotite, because it has a high content of Mg++ and it has iron in various oxidation states. Life also has many of the characteristics of the environment between mica sheets, giving further support for the possibility that mica was the substrate on and within which life emerged.

One of the most rapidly advancing areas of deep learning research aims at creating models that learn to disentangle the latent factors of variation from a data distribution. However, modeling joint probability mass functions is usually prohibitive, which motivates the use of conditional models assuming that some information is given as input. In the domain of numerical cognition, deep learning architectures have successfully demonstrated that approximate numerosity representations can emerge in multi-layer networks that build latent representations of a set of images with a varying number of items. However, existing models have focused on tasks requiring to conditionally estimate numerosity information from a given image. Here we focus on a set of much more challenging tasks, which require to conditionally generate synthetic images containing a given number of items. We show that attention-based architectures operating at the pixel level can learn to produce well-formed images approximately containing a specific number of items, even when the target numerosity was not present in the training distribution.

(1)Background: Early-age concrete shrinkage induces stress that impact the cost and service life of concrete pavements. (2)Methods: In this study, strain measurements of field slabs were conducted and a methodology was presented that independently derived autogenous, drying, and thermal shrinkages in the initial stages of concrete placement. Total strain was measured according to five different environmental conditions and shrinkage strain was calculated for each condition. (3)Results: By measuring the strain of the slab and the specimen, the drying shrinkage strain was measured to be approximately 54% better than that by the conventional non-stressed cylinder method because it was possible to measure the drying shrinkage strain at the surface rather than in the middle part of the slab along its depth direction. When the water-to-cement ratio increased (35→40%), there was a considerable reduction (317με→82με) of autogenous shrinkage strain for the concrete at 28 days of age. Furthermore, calculation of stress-dependent strain allowed the presentation of more intuitive and accurate results. (4)Conclusion: As the measurement of independent shrinkage occurrence is possible, the consequent calculated result of the stress-dependent strain acting on real slabs will facilitate improvement in the construction quality, reduction in the development of defects in the concrete structure, and increase in the service life.

The out-of-time-ordered correlation (OTOC) function is an important new probe in quantum field theory which is treated as a significant measure of random quantum correlations. In this paper, with the slogan "Cosmology meets Condensed Matter Physics" we demonstrate a formalism using which for the first time we compute the Cosmological OTOC during the stochastic particle production during inflation and reheating following canonical quantization technique. In this computation, two dynamical time scales are involved, out of them at one time scale the cosmological perturbation variable and for the other the canonically conjugate momentum is defined, which is the strict requirement to define time scale separated quantum operators for OTOC and perfectly consistent with the general definition of OTOC. Most importantly, using the present formalism not only one can study the quantum correlation during stochastic inflation and reheating, but also study quantum correlation for any random events in Cosmology. Next, using the late time exponential decay of cosmological OTOC with respect to the dynamical time scale of our universe which is associated with the canonically conjugate momentum operator in this formalism we study the phenomena of quantum chaos by computing the expression for {\it Lyapunov spectrum}. Further, using the well known Maldacena Shenker Stanford (MSS) bound, on Lyapunov exponent, λ≤2π/β, we propose a lower bound on the equilibrium temperature, T=1/β, at the very late time scale of the universe. On the other hand, with respect to the other time scale with which the perturbation variable is associated, we find decreasing but not exponentially decaying behaviour, which quantifies the random correlation at out-of-equilibrium. Finally, we have studied the classical limit of the OTOC to check the consistency with the large time limiting behaviour.

Phenotypic complementation of gene knock-outs is an essential step in establishing function. Here we describe a simple strategy for ‘gold standard’ complementation in which the mutant allele is replaced in situ with a wild type (WT) allele in a procedure that exploits CRISPR/Cas9. The method relies on the prior incorporation of a unique 24 nucleotide (nt) ‘bookmark’ sequence into the mutant allele to act as a guide RNA target during its Cas9-mediated replacement with the WT allele. The bookmark comprises a 23 nt Cas9 target sequence plus an additional nt to ensure the deletion is in-frame. Here, bookmarks are tailored to Streptococcus pyogenes CRISPR/Cas9, but could be designed for any CRISPR/Cas system. For proof of concept, 9 bookmarks were tested in Clostridium autoethanogenum. Complementation efficiencies reached 91%. As complemented strains are indistinguishable from their progenitors, concerns over contamination may be satisfied by incorporation of ‘watermark’ sequences into the complementing genes.

Often yam varieties grown in different agro-ecologies show differential responses across production environments, a term known as genotype-by-environment interaction. Genotype-by-environment interaction makes selecting the best genotypes under varied production environments more complex. This study tested twenty yam genotypes evaluated in six test environments to assess genotype, environment, and the interaction between genotypes and environmental effect for tuber yield, yam mosaic virus, and dry matter content. The experiments were conducted in two seasons across three locations in Uganda using a randomized complete block design with three replications. The results showed a significant effect (p ≤ 0.001) for genotype (G), environment (E), and genotype by environment interaction for all the traits. Serere 2021 and Namulonge 2021 were identified as the most discriminating and representative environments for testing the yam mosaic virus, respectively. Serere 2021 was recognized as the most discriminating environment, whereas Arua 2021 was identified as the closest to an ideal environment for assessing yam tuber yields. The tested genotypes also exhibited high resistance to yam mosaic virus disease, high tuber yields, and high dry matter content. Genotypes UGY16020, UGY16034, UGY16042, and UGY16080 demonstrated great resistance to yam mosaic virus disease, high yielding, and considerable dry matter content and are thus potential parents for yam improvement. Further evaluation of the four genotypes should be done under farmers' production systems for selection, improvement, and release as new yam varieties for Uganda

: This study was aimed at assessing adaptation and bonding of discontinuous (short) glass fiber-reinforced composite to intraradicular dentin EverX Flow (GC Corporation, Tokyo, Japan), when used as intracanal composite filling and anchorage instead of traditional fiber posts. (2) Methods: Seventy intact extracted human teeth were endodontically treated and randomly divided into 6 groups (n=10), depending on the materials used in the post space. In Group 1, a 2-bottle universal adhesive G2 Bond Universal + EverX Flow were tested. In group 2, a single-component universal adhesive G-Premio Bond + EverX Flow were used. In groups 3 and 4 the same materials are tested, but after cleaning of the canal walls with 17% EDTA and final irrigation with 5.25% NaOCl Ultrasound Activated. In the last three Groups (5-7) traditional prefabricated GC Fiber Posts 1.6 mm silanized with G-Multi Primer for 1 minute are cemented with a dual-cured composite resin cement (GradiaCore), after ultrasonic irrigation in the groups 6 and 7. In each group, 1 mm-thick slices from each sample (n=10) were cut for light microscope and SEM inspection for study materials adaption to the dentin and for measuring push-out strength of post / cemement material to the dentin / prefabricated post. These results were statistically analyzed: as the data distribution was not normal, the Kruskal-Wallis Analysis of Variance by Ranks had to be applied. The level of significance was set at p<0.05. Results: Push-out forces varied between 6.66-8.37 MPa. No statistically significant differences were recorded among the groups. Microscopic examination showed that ultrasonic irri-gation increased adaptation of the materials to the dentin surface. There was a trend of higher bond strength among the tested groups when EverX Flow was used. Also, the type of failure was more often cohesive when ultrasonic irrigation and two-step adhesive system were used. Conclusions: Within the limitations of this in vitro study, it may be concluded that when EverX Flow was used for intracanal anchorage in the post-endodontic recon-struction, similar push-out retentive forces and strength to those of traditional fiber posts cemented with particulate filler resin composite cements were achieved. Although further studies are necessary, EverX Flow represents an effective alternative to traditional fiber post adhesion in particular when used in combination with the two-step adhesive system and ultrasonic activation.

This paper evaluates an architectural design using an Energy Consumption consideration of Natural Ventilation in a hot dry climate (Khartoum State), at dwellings design applied. Method was used analysis of Autodesk IEVS software natural ventilation and energy consumption simulation. It resulted that to cooling, by natural ventilation in dwelling design used to get indoor temperature at the comfortable level during the summer. The Best-Case Situation of natural ventilation with consider of energy saving Based on the CFD simulation analysis, the performance of internal air velocity is approximately 0.7m/s. The wind velocity starts to slow down towards the rear of the apartment spaces. Approximately 95% of the internal areas have average air velocity between 0.43 m/s to 0.9 m/s. Internal Air flow pattern single floor house plan at Khartoum (Alazhari City); showing the internal air velocity of 0.7m/s near the window opening positions with the wind directions in the details and pressure of the air as worst-case situation, with velocity and temperature of the air with average 22o as a best-case situation. during a year. Architectural design process in the urban area of Alazhari City for dwelling towards to saving energy was applied and determined into an urban planning neighbourhood at Khartoum.

The present paper deals with an improvement of the strengthening technique consisting in the combined use of straps—made of stainless steel ribbons—and CFRP strips, to increase the out-of-plane strength of masonry walls. The straps of both the previous and the new combined technique pass from one face to the opposite face of the masonry wall through some holes made along the thickness, giving rise to a three-dimensional net of loop-shaped straps, closed on themselves. The new technique replaces the stainless steel ribbons with steel wire ropes, which form closed loops around the masonry units and the CFRP strips as in the previous technique. A turnbuckle for each steel wire rope allows the closure of the loops and provides the desired pre-tension to the straps. The mechanical coupling—given by the frictional forces—between the straps and the CFRP strips placed on the two faces of the masonry wall gives rise to an I-beam behavior of the facing CFRP strips, which begin to resist the load as if they were the two flanges of the same I-beam. Even the previous combined technique exploits the ideal I-beam mechanism, but the greater stiffness of the steel wire ropes compared to the stiffness of the steel ribbons makes the constraint between the facing CFRP strips stiffer. This gives the reinforced structural element greater stiffness and delamination load. In particular, the experimental results show that the maximum load achievable with the second combined technique is much greater than the maximum load provided by the CFRP strips. Even the ultimate displacement turns out to be increased, allowing us to state that the second combined technique improves both strength and ductility. Since the CFRP strips of the combined technique run along the vertical direction of the wall, the ideal I-beam mechanism is particularly useful to counteract the hammering actions provided by the floors on the perimeter walls, during an earthquake. Lastly, after the building went out of service, the box-type behavior offered by the three-dimensional net of straps prevents the building from collapsing, acting as a device for safeguarding life.

Cascading Tank Village Systems (CTVSs) of Sri Lanka historically provided a resilient community-based social-ecological water management system in the rural dryzone of Sri Lanka [1]. The CTVS has been described as the ‘lifeblood’ of communities in the rural dry zone [2] and as a globally important Agricultural Heritage System by the FAO [3]. After being abandoned for many centuries, their restoration is now being pursued by different national and international actors as a key to climate change mitigation and sustainable livelihoods for communities [4]. Rural livelihoods in the dry zone are at risk due to multiple factors, poor access and management of water, economic and health pressures, as well as resource limitations and degradation [5]. Despite recent efforts to restore CTVS systems, no social-ecological approach (SES) nor sustainable livelihoods framework (SLF) focused approach to ensuring resilient and sustainable livelihood outcomes has been taken [6]. As part of an on-going PhD project, this paper describes the background, current challenges and potential for an SES focused resilience thinking approach to CTVS combined with a focus on sustainable livelihoods for future sustainable livelihood opportunities and outcomes. The study finds current restoration efforts are at a crossroads between restoring the past (system adaptability) or transforming for the future. It introduces relevant SES and resilience thinking concepts and analyses the CTVS from this perspective. A particular contribution of this study is to point to the significant overlaps and complementarities in social-ecological (SES) resilience thinking and SLF approaches to analysis and proposals for resilient rural development. Employing resilience thinking principles it recommends strategies to create positive livelihood outcomes for communities and households. Keywords: cascading tank village system; sustainable livelihoods; resilience thinking; Sri Lanka; rural dry zone; community rural development

Ultra-short 230 fs laser pulses of 515 nm wavelength were tightly focused into 700 nm focal spots and utilised in opening ~ 0.4 − 1 μm holes in alumina Al2O3 etch masks with 20-50 nm thickness. Such dielectric masks simplify fabrication of photonic crystal (PhC) light trapping patterns for the above-Lambertian performance of high efficiency solar cells. Conditions of laser ablation of transparent etch masks and effects sub-surface Si modifications were revealed by plasma etch- ing, numerical modeling, and minority carrier lifetime measurements. Mask-less patterning of Si is proposed using fs-laser direct writing for dry plasma etch of Si.

E-commerce platforms created to meet the needs of digital consumers, who are the leading actors of digital-oriented consumption, are increasing rapidly. Revolutionizing our daily lives by offering the digital equivalent of real-world experiences, e-commerce now offers a comfortable shopping experience that transcends the limitations of time and space. This phenomenon has been embraced by individuals spanning all age groups, from young children to the elderly. Structural equation modeling was used in this study, in which the factors affecting online shopping addiction were determined. In this direction, the causal and correlational relationships between the variables of fear of missing out (FoMO), cognitive load, personality types, some socio-demographic characteristics (gender and monthly shopping amount) and online shopping addiction in online shopping were revealed structurally. Since the purposive sampling was used, the study was carried out on 488 people. The goodness-of-fit indices included in the created model were found at an “acceptable” level (χ2/df= 2.248, p=0.000; RMSEA=0.051; GFI=0.878; AGFI=0.856; CFI=0.950; NFI=0.914). These results show that the final version of the model meets the necessary criteria for a good fit, its validity and accuracy. The study revealed the causal and correlational relationship between online shopping addiction and cognitive load, personality types, FoMO, gender, and monthly online shopping amount.

Although the dry ice method used to synthesize exfoliated graphite/graphene is little known and used, it has significant advantages over others: it is low cost, simple, and a large quantity of material can be obtained using some inorganic and highly available acids (which can be reused). Despite the above advantages, the main reason for its incipient development is the resulting presence of magnesium oxide in the final product. In the present work, three different treat-ments were tested to remove this remnant using some acid chemical leaching processes, making use of hydrochloric acid, aqua regia, and piranha solution. Based on the experimental evidence, it was found that using aqua regia and combining the leaching process with mechanical milling was the most efficient way of removing such a remnant, the residue being only 0.9 wt.%. This value is low when compared to that obtained with the other acid leaching solutions and purifi-cation process (2.8 - 29.6 wt.%). A mandatory high-energy mechanical milling stage was neces-sary during this treatment, in order to expose and dissolve the highly insoluble oxide without secondary chemical reactions on the graphenes. High-energy mechanical milling is an effective route to exfoliate graphite/graphene, which allows the magnesium oxide to be more susceptible to acid treatment. The obtained surface area was 504 m2g-1; this high value resulting from the in-tense exfoliation can potentiate the use of this material for a wide variety of applications.

Erythropoietin (EPO) protects cells by inhibiting apoptosis, oxidative stress and inflammation in several models of retinal degeneration. In this study, we demonstrate the effects of recombinant Adeno Associated Virus (AAV) vector-mediated delivery of a modified form of erythropoietin (EPO-R76E) in an established mouse model of dry-AMD in which retinal degeneration is induced by RPE oxidative stress. Experimental vector AAV-EPO-R76E and control vector AAV-GFP were packaged into serotype-1 (AAV1) to enable RPE selective expression. RPE oxidative stress-mediated retinal degeneration was induced by exon specific deletion of the protective enzyme MnSOD (encoded by Sod2) by cre/lox mechanism. Experimental mice received subretinal injection of AAV-EPO-R76E in the right eye and AAV-GFP in the left eye. Western blotting of RPE/Choroid protein samples from AAV-EPO-R76E injected eyes showed RPE specific exogenous protein expression. Retinal degeneration was monitored by electroretinography (ERG). EPO-R76E over-expression in RPE delayed the progressive retinal degeneration as measured by light microscopy in RPE specific Sod2 knockout mice. Delivery of EPO-R76E vector can be used as a tool to prevent retinal degeneration induced by RPE oxidative stress as seen in this mouse model.

In this paper, we have shown the electronic circuit equivalence of a mechanical system consists of two oscillators coupled with each other. The mechanical design has the effects of the magnetic, resistance forces and the spring constant of the system is periodically varying. We have shown that the system’s state variables, such as the displacements and the velocities, under the effects of different forces, lead to some nonlinear behaviors, like a transition from the fixed point attractor to the chaotic attractor through the periodic and quasi-periodic attractors. We have constructed the equivalent electronic circuit of this mechanical system and have verified the numerically obtained behaviors using the electronic circuit.

Dry eye disease (DED) most commonly caused by evaporative subtypes and mainly induced by meibomian gland dysfunction (MGD). Intense pulsed light (IPL) combined with meibomian gland expression (MGX) is noninvasive treatment for improvement of ocular discomfort symptoms and MGD. In this prospective study between November 2020 and May 2022, the patients met the criteria of both ocular surface disease index (OSDI) ≥13 scores and standardized patient evaluation of eye dryness (SPEED)≥ 8 scores were enrolled in Kaohsiung Veteran General Hospital. Three separate treatment sessions of IPL therapy combined with MGX administered to the lower lids with an interval of 28 days. Further tear film assessment included lipid layer thickness (LLT), tear meniscus height (TMH), non-invasive tear break-up time (NIBUT), meibomian gland loss (MGL) either beforeor after 1st and 3rd IPL therapy combined with MGX. Besides, lissamine green staining and pain scores were also recorded. We totally enrolled 37 patients of 74 eyes. Men accounted for 18.92% (7/37). The mean age was 54.51 ± 11.72 years. The mean OSDI scores were 58.12 ± 22, while the SPEED scores were 17.03 ± 5.98. The mean Schirmer’s test was 3.66 ± 2.43 mm. After three sessions IPL treatment with MGX, the OSDI, SPEED, LLT, TMH, MGL, MGXS and pain scores were significantly improved. For the MGX scores (MGXS) ≤20 group, MGL and lissamine green scores showed significant improvements. For the MGXS >20 group, TMH and dry spot rate revealed statistically improvement. Noninvasive IPL therapy with MGX statistically improved not only dry eye symptoms but also tear film assessments.

The underlying physical concept of computing out-of-time-ordered correlation (OTOC) is a significant new tool within the framework of quantum field theory, which now-a-days is treated as a measure of random fluctuations. In this paper, by following the canonical quantization technique we demonstrate a computational method to quantify the two different types of Cosmological auto-correlated OTO functions during the epoch when the non-equilibrium features dominates in Primordial Cosmology. In this formulation, two distinct dynamical time scales are involved to define the quantum mechanical operators arising from cosmological perturbation scenario. We have provided detailed explanation regarding the necessity of this new formalism to quantify any random events generated from quantum fluctuations in Primordial Cosmology. We have performed an elaborative computation for the two types of two-point and four-point auto-correlated OTO functions in terms of the cosmological perturbation field variables and its canonically conjugate momenta to quantify random auto-correlations in the non-equilibrium regime. For both the cases we found significantly distinguishable non-chaotic, but random behaviour in the OTO auto-correlations, which was not pointed before in this type of studies. Finally, we have also demonstrated the classical limiting behaviour of the mentioned two types of auto-correlated OTOC functions from the thermally weighted phase space averaged Poisson Brackets, which we found exactly matches with the large time limiting behaviour of the auto-correlations in the super-horizon regime of the cosmological scalar mode fluctuation.

Data on the seasonally dry tropical forests of Mexico have been examined in the light of statistical mechanics. The results suggest a division into two classes of species. There are drifting populations of a cosmopolitan class capable of existing in most dry forest sites; these have a statistical distribution previously only observed (globally) for populations of alien species. A high proportion of species found only at a single site are endemic and these prefer sites comparatively low in species richness.

Adding a submerged zone (SZ) is deemed to promote denitrification during dry periods and thus improve NO3--N removal efficiency of a bioretention system. However, few studies had investigated the variation of nitrogen concentration in the SZ during dry periods and evaluated the effect of the variation on nitrogen removal of the bioretention system. Based on the experiment in a mesocosm bioretetion system with SZ, this study investigated the variation of nitrogen concentration of the system under 17 consecutive cycles of wet and dry alternation with varied rainfall amount, influent nitrogen concentration and antecedent dry periods (ADP). The results indicated that (1) during the dry periods, NH4+-N concentrations in SZ showed an exponential decline trend, decreasing by 50% in 12.9 ± 7.3 hours; while NO3--N concentrations showed an inverse S-shape decline trend, decreasing by 50% in 18.8 ± 6.4 hours; (2) during the wet periods, NO3--N concentration in the effluent showed an S-shape upward trend; and at the early stage of the wet periods, the concentration was relatively low and significantly correlated with ADP, while the corresponding volume of the effluent was significantly correlated with the SZ depth; (3) in the whole experiment, the contribution of nitrogen decrease in SZ during dry periods to NH4+-N and NO3--N removal accounted for 12% and 92%, respectively; and the decrease of NO3--N in SZ during the dry period was correlated with the influent concentration in the wet period and the length of the dry period.

The present study illustrates a brain-computer interface designed and developed to be wearable, portable, and user-friendly. Eight dry electroencephalographic sensors were adopted to acquire the brain activity associated with motor imagery. Multimodal feedback in extended reality was exploited to improve the detection of neurological phenomena. Twenty-seven healthy subjects used the proposed system in five sessions to investigate the effects of feedback on motor imagery. The sample was divided into two equal-sized groups: the "neurofeedback" group, which performed motor imagery while receiving feedback, and the "control" group, which performed motor imagery with no feedback. Several questionnaires were administrated to participants aiming to investigate the usability of the proposed system and individual’s ability to imagine movements. The highest mean classification accuracy across subjects of control group was about 62 % with 3 % associated type A uncertainty, and 69 % with 3 % uncertainty for neurofeedback group. Moreover, in some cases the results were significantly higher for the neurofeedback group. The perceived usability by all participants was high. Overall, the study highlights the advantages and the pitfalls of using a wearable brain-computer interface with dry sensors. Notably, the results and the perceived usability pave the way for the employment of the proposed system in tele-rehabilitation.

The use of the Google Scholar produces about 278 hits on the term ‘‘inertial propulsion.’’ If patents are also included, the number of hits increases to 536. This paper discusses, in a critical way, some characteristic aspects of this controversial topic. The review starts with the halteres of athletes in the Olympic games of ancient times and then continues with some typical devices which were developed or/and patented from the second fourth of the twentieth century till today.

The encapsulation of proteins into core-shell structures is a widely utilised strategy for controlling protein stability, delivery and release. Despite the recognised utility of these microstructures, however, core-shell fabrication routes are often too costly or poorly scalable to allow for industrial translation. Furthermore, many scalable routes rely upon emulsion-techniques implicating denaturing or environmentally harmful organic solvents. Herein, we investigate core-shell protein encapsulation through single-feed, aqueous spray drying: a cheap, industrially ubiquitous particle-formation technology in the absence of organic solvents. We show that an excipient’s preference for the surface of the spray dried particle is well-predicted by its hydrodynamic diameter (Dh) under relevant feed buffer conditions (pH and ionic strength) and that the predictive power of Dh is improved when measured at the spray dryer outlet temperature compared to room temperature (R2 = 0.64 vs. 0.59). Lastly, we leverage these findings to propose an adaptable design framework for fabricating core-shell protein encapsulates by single-feed aqueous spray drying.

In this article we study the presence of chaos in supersymmetric(SUSY) quantum mechanics. For that purpose we present a form of 4-point out of time order correlator(OTOC) for SUSY quantum mechanical systems using tensor product formalism. We calculate the 4-point OTOC for SUSY 1D harmonic oscillator and find that the OTOC is exactly equal to that of 1D bosonic harmonic oscillator system. In similar manner using the eigenstate representation of supersymmetric systems we calculate the generalized higher order out of time order correlator. The higher order OTOC is a more sensitive measure of chaos than the usual 4-point correlator used in literature. Finally, we calculate the generalized 2N-point OTOC for SUSY 1D harmonic oscillator.

Purpose: To assess the tolerability, safety, and efficacy of an ophthalmic topical formulation containing helenalin from Arnica montana and hyaluronic acid 0.4% (HA) in patients with mild to moderate dry eye disease (DED) exhibiting positive Matrix Metalloproteinase 9 (MMP-9) test results. Methods: Tolerability and safety were evaluated in 24 healthy subjects. Participants were in-structed to routinely apply one drop of the formulation three times a day in the study eye, for a period of two weeks, followed by a clinical follow-up of 21 days. Efficacy was studied in 48 DED patients randomized into Study (Group 1/ receiving the study formulation) or Control (Group 2/ Receiving HA 0.4% eye lubricant) groups, for 4 weeks. Assessments included MMP-9 positivity, conjunctival impression cytology (CIC), Ocular Surface Disease Index (OSDI), non-invasive tear film breakup time (NIF-BUT), non-invasive average breakup time (NIAvg-BUT), ocular surface staining, Schirmer's test, and meibomiography. A crossover design with a four-week follow-up was applied to the control group. Results: Healthy subjects receiving the study formulation exhibited good tolerability and no ad-verse events. Group 1 showed significant MMP-9 reduction (25% positivity rate) unlike Group 2 (87.5% positivity rate). Group 1 displayed improved CIC (33.3% vs. 0% SSD) compared to Group 2 (29.1%). OSDI and NIF-BUT scores improved in both groups (p < 0.001). Only Group 1 showed improved NIAvg-BUT and Schirmer’s test scores (p < 0.001), while Group 2 did not (p > 0.05). MMP-9-positive subjects shifted from 25% to 91.6% in Group 1 and 87.5% to 20.8% in Group 2 after the follow-up. Conclusion: The topical formulation containing helenalin from Arnica montana and hyaluronic acid is well tolerated and has a good safety profile. Our formulation reduces DED sympto-matology and modulates the ocular surface inflammatory process; this is evidenced by the en-hancement of CIC, the improvement of DED-related tear film status, and the reduction of MMP-9 positivity rate.

Traditional dry fermented meat products are obtained artisanally in many countries, where they represent a gastronomic heritage well distinguished from industrial counterparts. This food category is most often obtained from red meat, a food commodity that is under attack because of evidences of increased risk of cancer and degenerative diseases with high consumption. However, traditional fermented meat products are intended for moderate consumption and gastronomic experience and, as such, their production must be continued also to safeguard culture and economy of the geographical areas of origin. In this review, the main risks attributed to these products are considered and how these risks are minimized by following precise production norms, respectful of the ancient manufacturing processes is described. Moreover, results obtained in studies reporting use of autochthonous microbial cultures of lactic acid bacteria (LAB), coagulase negative staphylococci (CNS), Debaryomyces hansenii and Penicillium nalgiovense to improve safety and quality of traditional fermented meats are summarized. The role of these products as a source of microorganisms that can be beneficial to the host are also considered. From the results of the studies reviewed here it appears that the development of autochthonous cultures for these foods ensure safety and stabilize sensory characteristics with possibility to be extended to the large variety of traditional productions.

Vaccination is the key infection control measure against Coronavirus Disease 2019 (COVID-19). Most municipalities in Japan have adopted an opt-in system for COVID-19 vaccination, but its background information is limited. We, therefore, aimed to examine the differences in vaccination coverages and their cancellation rates between opt-in and opt-out settings for COVID-19 vaccination in 10 cities in A prefecture, Japan. 10 cities in A Prefecture were surveyed by email as of 10 October 2021 on the vaccination coverage by age group (12 years and older) and the cancellation rate on the day of vaccination. We also checked on the complaints received in the opt-out group. Opt-out was adopted in one of the ten cities in which vaccination was designed for all household members aged 15-64, thus serving as the opt-out group. Vaccination coverage in the opt-out group was 88.2%-89.2% for the first dose and 84.9%-86.0% for the second dose at 95% confidence intervals in the comparable 20–64-year age group. In contrast, the overall opt-in group (nine cities, one of which did not have an identified vaccination rate) was 51.3%-83.6% for the first dose and 63.5%-74.8% for the second dose in the same age group. For the opt-out group, the cancellation rate on the day was 11.3% for the first dose and 3.7% for the second dose, which had a lower cancellation rate than that of the opt-out on influenza vaccines in previous studies, 71%. Meanwhile, the opt-in group did not monitor them. There were no complaints about default changes in the opt-out group. While there is room for further research, such as understanding the reasons for accepting the default change by residents in the opt-out group, it was suggested that making opt-out the default would promote COVID-19 vaccination.

This work is the first scientific study on the development of the composition and technology of a new antioxidant agent based on a combination of extracts of tree medicinal plants and the study of the technological parameters of a dry extract. Further draw up technological regulations for their production and their introduction into production. This study aims to the antioxidant activity of dry extract "Antioxim" was determined. In order to create this herbal collection of plant, first of all, to study the technological parameters of raw materials, such as mass size, porosity, dispersibility, free volume of layers of raw materials, water absorption coefficient of extractives, and technological process efficiency to study the effect of parameters, developed at the Department of "Industrial Technology of Medicines" of the Tashkent Pharmaceutical Institute:

The switching game Lights Out and its variants were studied extensively as recreational mathematics problems. The game board of the ordinary Lights Out is a rectangular grid of lights, where each light is either on or off. By clicking a light, the clicked light and its adjacent rectilinear neighbors are toggled. Given an arbitrary initial configuration of lights, the final mission is to “solve” this game by switching off all the lights. Most studies on Lights Out and its variants focused on the solvability of given games or the number of solvable games, but when the game is viewed in a coding-theoretical perspective, more interesting questions with special meanings in coding theory will naturally pop up, such as finding the minimal number of lit lights among all solvable games except the solved game, or finding the minimal number of lit lights that the player can achieve from a given unsolvable game, etc. However, these problems are usually hard to be solved in general in terms of algorithmic complexity. This study considers a natural extension of the Lights Out game, which enlarges the toggle pattern in a way that all the lights in the same row and those in the same column of the clicked light are toggled. This variant of Lights Out is a two-state version of a switching game called Alien Tiles. In this paper, we investigate the properties of the two-state Alien Tiles, and discuss several coding-theoretical problems about this game. Then, we apply this game as an error correction code and investigate its optimality. We also give a brief overview on algorithmic complexity and coding theory for readers who are not familiar with these topics. The purpose of this paper is to propose ways of playing switching games in a think-outside-the-box manner, which benefit the recreational mathematics community.

Background and Objectives: Mucilaginous substances from plant extracts are known to be able to support the lubricating effect of hyaluronic acid (HA) in dry eye disease (DED). In this pilot study, the combined lubricating effect of HA and mallow extract (Malva sylvestris L.) in patients with DED was assessed. Materials and Methods: 20 patients at 5 ophthalmological practices in Italy were treated with eye drops, containing HA and mallow extract on the one hand, and with eye drops containing HA only, on the other hand, in a two-period crossover design. As primary endpoints, the tear film breakup time (TBUT), the reduction of lissamine green staining of the ocular surface (Oxford Scheme, OS), and the safety and efficacy assessment by the ophthalmologists were evaluated. As secondary variables, the patient symptom score, the ocular surface index (OSDI), and the satisfaction, preference and efficacy judgement by the patients were evaluated. All data were analysed descriptively in addition to an exploratory analysis of the target variables. Results: Both products were well tolerated. There were no statistically significant differences, with regard to the TBUT, OS and OSDI, between both treatments. Anyway, the efficacy and safety assessments by the ophthalmologists and the patients showed results in favour of the combined product. Conclusion: The addition of mallow extract to HA containing eye drops enhances the treatment of DED at least with respect to subjective measurements. Further assessments will have to be done to prove and explain this observation in terms of measurable parameters, e.g. markers for inflammatory cytokines.

The Centers for Disease Control and Prevention recommends everyone between 13-64 years be tested for HIV at least once as a routine procedure. HIV routine screening is reimbursable by Medicare, Medicaid, expanded Medicaid, and most commercial insurance plans. Yet, scaling-up HIV routine screening remains a challenge. We conducted a scoping review for studies on financial benefits and barriers associated with HIV screening in clinical settings in the U.S. to inform an evidence-based strategy to scale-up HIV routine screening. We searched Ovid MEDLINE®, Cochrane, and Scopus for studies published between 2006 - 2020 in English. The search identified 383 Citations; we screened 220 and excluded 163 (outside the time limit, irrelevant, or outside the U.S.). Of the 220 screened articles, we included 35 and disqualified 155 (did not meet the eligibility criteria). We organized eligible articles under two themes: financial benefits/barriers in healthcare settings (9 articles); and Cost-effectiveness in healthcare settings (26 articles). The review concluded recommendations in three areas: (1) Finance: Incentivize healthcare providers/systems for implementing HIV routine screening and/or separate its reimbursement from bundle payments; (2) Personnel: Encourage nurse-initiated HIV screening programs in primary care settings and educate providers on CDC recommendations; and (3) Approach: Use opt-out approach.

Among the many neglected underutilized species, tuberous Andean root crops like the ahipas (Pachyrhizus ahipa) constitute a promising alternative for increasing diversity in nutrient sources and food security at a regional level. In this study, we present the content of some functional compounds in tuberous roots from several ahipa accessions and the progenies of the interspecific hybrid X207 (P. ahipa × P. tuberosus). A significant objective was to determine protein and free amino acids in the roots to evaluate their food quality as protein supply. The interspecific hybrids have been found to possess the root quality to provide the crop with a higher dry matter content. The high dry matter content of the P. tuberosus Chuin materials is retained in the root quality of the hybrids. Food functional components like carbohydrates, organic acids, and proteins were determined in several ahipa accessions and a stable (non-segregating) progeny of the interspecific hybrid, X207. The X207 roots showed a significantly higher dry matter content and a lower content in soluble sugars, but no significant differences were found in starch content or organic acids compared to the ahipa accessions. About the root mineral contents, Fe and Mn concentrations in X207 were significantly raised compared to the average of ahipa accessions. Among the ahipa and the hybrid, no prominent differences in protein content or protein amino acids were found, being both partially defective in providing sufficient daily intake of some essential amino acids. Root weight, a central component of root yield, was significantly higher in X207, but thorough field studies are required to substantiate the hybrid’s superior yield performance..

Background: In recent years, the assessment and guidance of cardiopulmonary resuscitation (CPR) quality using noninvasive and invasive monitoring techniques have been increasingly recommended. In this study, we introduce a new physiological monitoring system that simultaneously measures arterial pressure (AP), venous pressure (VP), and cerebral tissue oxygen saturation (SctO2) during CPR. Methods: This prospective observational study was conducted at a single center (Kagoshima City Hospital). Adult out-of-hospital patients aged ≥18 years with an intravenous femoral arterial line, venous line, and SctO2 monitor were included. We measured femoral arterial pressure (FAP) and femoral venous pressure (FVP) invasively if catheters were immediately inserted into the femoral artery and vein for potential candidates who require interventions such as extracorporeal cardiopulmonary resuscitation but did not receive such interventions as a result. Results: We observed several representative cases that provided the following insights: We presented several cases, including two patients with significant increases in FVP and low SctO2 values, and in both cases, return of spontaneous circulation (ROSC) was not achieved. In contrast, we also presented two cases in which CPR resulted in higher FAP compared to FVP and an upward trend in SctO2 values was observed, and both instances achieved ROSC. Conclusion: We presented a simultaneous physiological monitoring system that can monitor AP, VP, and SctO2 during CPR. Further case accumulations will be necessary to assess the variations in hemodynamic status during CPR and the association between each hemodynamic status and outcomes after cardiac arrest.