Despite the relative scarcity of studies focusing on pharmacotherapy in aphasia, there is evidence in the literature indicating that remediation of language disorders via pharmaceutical agents could be a promising aphasia treatment option. Among the various agents used to treat chronic aphasic deficits, cholinergic drugs have provided interesting results. In the current review, we focused on published reports investigating the impact of acetylcholine on language and further cognitive disturbances. It has been suggested that acetylcholine plays an important role in neuroplasticity and is related to several aspects of cognition, such as memory and attention. Moreover, cholinergic input is diffused to a wide network of cortical areas, which have been associated with language sub-processes. This could be a possible explanation for the positive reported outcomes of cholinergic drugs in aphasia recovery, and specifically in distinct language processes, such as naming and comprehension, as well as overall communication competence. However, evidence with regard to functional alterations in specific brain areas after pharmacotherapy is rather limited. Finally, despite the positive results derived from the relevant studies, cholinergic pharmacotherapy treatment in post-stroke aphasia has not been widely implemented. The present review aims to provide an overview of the existing literature in cholinergic pharmacotherapy interventions in post-stroke aphasia, following an integrated approach by converging evidence from neuroanatomy, neurophysiology, and neuropsychology.

Male breast cancers are uncommon, as men account for less than 1 percent of all breast carcinomas. Among the predisposing risk factors for male breast cancer, the following appear to be significant: a) breast/chest radiation exposure, b) estrogen use, diseases associated with hyper-estrogenism, such as cirrhosis or Klinefelter syndrome, and c) family health history. Furthermore, there are clear familial tendencies, with a higher incidence among men who have a large number of female relatives with breast cancer and d) major inheritance susceptibility. Moreover, in families with BRCA mutations, there is an increased risk of male breast cancer, although the risk appears to be greater with inherited BRCA2 mutations than with inherited BRCA1 mutations. Due to diagnostic delays, male breast cancer is more likely to present at an advanced stage. A core biopsy or a fine needle aspiration must be performed to confirm suspicious findings. Infiltrating ductal cancer is the most prevalent form of male breast cancer, while invasive lobular carcinoma is extremely uncommon. Male breast cancer is almost always positive for hormone receptors. A worse prognosis is associated with a more advanced stage at diagnosis for men with breast cancer. And randomized controlled trials which recruit both female and male patients should be developed in order to gain more consistent data on the optimal clinical approach.

Salivarian trypanosomes are extracellular parasites causing anthroponotic and zoonotic infections. Anti-parasite vaccination in considered the only sustainable method for global trypanosomosis control. Unfortunately, not a single field applicable vaccine solution has been successful so far. Active destruction of the host’s adaptive immune system by trypanosomes is believed to contribute to this problem. Here we show Trypanosome brucei brucei infection results in the lasting obliteration of immunological memory, including vaccine-induced memory against non-related pathogens. Using the well-established DTPa vaccine model in combination with a T. b. brucei infection and diminazene diaceturate anti-parasite treatment scheme, our result demonstrate that while the latter ensured the full recovery from the T. b. brucei infection, it failed to restore an efficacious anti-pertussis vaccine recall response. DTPa vaccine failure coincided with a shift in the IgG1/IgG2a anti-pertussis antibody ratio in favor of the latter, and a striking impact on all spleen immune cell populations. Interestingly, an increased plasma IFNy level in DTPa vaccinated trypanosome infected mice did result in a temporary antibody-independent improvement of early-stage trypanosomosis control. In conclusion, our results are the first to show that trypanosome inflicted immune damage is permanent, and is not restored by successful anti-parasite treatment.

Randomized clinical trials represent the gold standard in therapeutic research. Nevertheless, observational cohorts of patients treated for multidrug-resistant (MDR) or rifampin-resistant (RR) tuberculosis (TB) also play an important role in generating evidence to guide MDR/RR TB Generally, summary exposure classifications (e.g., ‘ever versus never’, ‘exposed at baseline’) have been used to characterize drug exposure, in the absence of detailed longitudinal data on MDR-TB regimen These summary classifications, along with an absence of data on covariates that change throughout the course of treatment, constrain researchers’ ability to answer the most relevant questions while accounting for known This paper highlights the importance of regimen changes in improving inference from observational studies of longer MDR-TB treatment regimens and offers an overview of the data and analytic strategies required to do

BACKGROUND: From March to April 2020, Spain was the center of the SARS-CoV-2 pandemic, particularly Madrid with approximately 30% of the cases in Spain. The aim of this study is to report the suspected serious adverse drug reactions (SADRs) in COVID-19 patients versus non-COVID-19 patients detected by the prospective pharmacovigilance program based on automatic laboratory signals (ALSs) in the hospital (PPLSH) during that period. We also compared the results with the suspected SADRs detected during the same period for 2019. METHODS: All ALSs that reflected potential SADRs (including neutropenia, pancytopenia, thrombocytopenia, anemia, eosinophilia, leukocytes in cerebrospinal fluid, hepatitis, pancreatitis, acute kidney injury, rhabdomyolysis and hyponatremia were prospectively monitored in hospitalized patients during the study periods. We analyzed the incidence and the distribution of causative drugs for the COVID-19 patients. RESULTS: The incidence rate of SADRs detected in the COVID-19 patients was 760.63 (95% CI 707.89–816.01) per 10,000 patients, 4.75-fold higher than the SADR rate for non-COVID-19 patients (160.15 per 10,000 patients,95% CI 137.09–186.80), and 5.84-fold higher than the SADR rate detected for the same period in 2019 (130.19 per 10,000 patients, 95% CI 109.53–154.36). The most frequently related drugs were tocilizumab (59.84%), dexketoprofen (13.93%), azithromycin (8.43%), lopinavir-ritonavir (7.35%), dexamethasone (7.62%), and chloroquine/hydroxychloroquine (6.91%). CONCLUSIONS: The incidence rate of SADRs detected by the PPSLH in patients with COVID-19 was 4.75-fold higher than that of the non-COVID-19 patients. Caution is recommended when using medications for COVID-19 patients, especially drugs that are hepatotoxic, myotoxic, and those that induce thromboembolic events.

Background and Objective: China has managed to control the coronavirus disease (COVID-19) with confinement measurements and treatment strategies, while other countries are struggling to contain the spread. This study discusses the guidelines related to COVID-19 in China in order to provide important references for other countries in the fight against COVID-19. Methods: Chinese guidelines relevant to COVID-19 were systematically searched via the China National Knowledge Infrastructure database, YiMaiTong database, and World Health Organization (WHO) COVID-19 database on March 20^th, 2020. Guideline information was extracted, including date of publication, source, objectives and the target population. Guidelines specific to the pharmacological treatment of COVID-19 were further investigated to identify the types of antivirus drugs recommended and to report on how treatment recommendations for COVID-19 have evolved overtime. Results: A total of 114 guidelines were identified, of which 87 were national guidelines and 27 were regional guidelines. The scope of included guidelines consisted of: the diagnosis and treatment of COVID-19, the management of hospital departments and specific diseases during the outbreak of COVID-19. Sixty-four of the included guidelines targeted all COVID-19 patients, while the remaining guidelines concentrated on special patient populations (i.e., geriatric population, pediatric population, and pregnant population) or patients with coexisting diseases. Twenty-three guidelines focused on the pharmacological treatments for all COVID-19 patients. Interferon, Lopinavir/Ritonavir, Ribavirin, Chloroquine, and Umifenovir represented the most recommended antivirus drugs. With the emergence of encouraging results from preclinical and preliminary clinical studies, Chloroquine Phosphate was recommended in the national Diagnosis and Treatment Protocol for Novel Coronavirus Pneumonia (6^th version) on February 19^th, 2020. Thereafter, more detailed guidelines regarding the adjustment of dosage regimens and the monitoring of adverse events of Chloroquine Phosphate were published. To date, 8 Chinese guidelines have recommended Chloroquine Phosphate or Hydroxychloroquine as mainstream antivirus drug for the treatment of COVID-19. Conclusions: China has generated a plethora of guidelines covering almost all aspects of COVID-19. Chloroquine, as one widely affordable treatment, holds great potential to become the gold standard choice as more clinical evidence is shared by researchers from China as well as other countries.

Implementation of waterflood is with injected pressured water to reservoir to escalation oil production. Produced water is the dominated result from oil and gas mechanism in this world meanwhile 65% of water is injected back to the well for pressure maintenance, 30% for discharge aquifier condition and surface. For shaly sand, produced water usually bring coarse and suspended sand to the surface. Therefore, this sand level is needed to declining to avoid plugging in injection well until certain economic condition.

Gastrointestinal stromal tumors are the mostly seen mesenchymal tumors of the gastrointestinal system and mostly seen at the stomach. We report a case of giant gastrointestinal stromal tumor of the stomach in a 71-year-old woman. The physical examination and radiological findings revealed that a giant mass occupied most of the abdominal cavity. The patient underwent an en-block resection of this giant mass with partial resection of the distal stomach and transverse colon and, reconstruction with gastro-jejunostomy and end-to end colo-colic anatomoses. The histopathologic diagnosis was revealed as gastrointestinal stromal tumor of the stomach. We suggest that complete surgical resection is the only effective radical treatment approach for giant gastrointestinal stromal tumors of the stomach.

Gonorrhea is a sexually transmitted disease with a high morbidity burden. Incidence of this disease is rising due to the increasing number of antibiotic-resistant strains. Neisseria gonorrhoeae has shown an extraordinary ability to develop resistance to all antimicrobials introduced for its treatment. In fact, it was recently classified as a “Priority 2” microorganism in the WHO Global Priority List of Antibiotic-Resistant Bacteria to Guide Research, Discovery and Development of New Antibiotics. Seeing as there is no gonococcal vaccine, control of the disease relies entirely on prevention, diagnosis and, especially, antibiotic treatment. Different health organizations worldwide have established treatment guidelines against gonorrhea, mostly consisting in dual therapy with a single oral or intramuscular dose. However, gonococci continue to develop resistances to all antibiotics introduced for treatment. In fact, the first strain of super-resistant N. gonorrhoeae was recently detected in the United Kingdom, which was resistant to ceftriaxone and azithromycin. This increasing detection of resistant gonococcal strains may lead to a situation where gonorrhea becomes untreatable. Seeing as drug resistance appears to be unstoppable, new treatment options are necessary in order to control the disease. Three approaches are currently being followed for the development of new therapies against drug-resistant gonococci: (1) novel combinations of already existing antibiotics, (2) development of new antibiotics and (3) development of alternative therapies which might slow down the appearance of resistances. N. gonorrhoeae is a public health threat due to the increasing number of antibiotic-resistant strains. Current treatment guidelines are already being challenged by this Superbug. This has lead the scientific community to develop new antibiotics and alternative therapies in order to control this disease.

In the clinical electrophysiologic practice, the reading and comparing electroencephalographic (EEG) recordings some times is insufficient and take to much time. That is why in the last years it has begun to introduce new methods of EEG analysis, that give a better and faster understanding of the EEG dynamics and allow a rapid intervention in the patient's treatment. Tools coming from the information theory or nonlinear system as an entropy and complexity have been shown to be a very good alternative to address this problem. In this work we introduce a novel method -the permutation Lempel-ziv complexity vs permutation entropy map. This method was applied to EEG of two patients with specific diagnosed pathologies during respective follow up processes of pharmacological changes in order to detect changes that are not evident with the usual inspection method. Our results show that the proposed method are useful for observing an evolutionary retrospective clinical effects of pharmacological interventions in both patients, and from these, to follow the clinical response to the proposed treatment.

Background: The UNHLM pledged to enroll 30 million in TB preventive treatment (TPT) by 2022, necessitating TPT expansion to all at TB risk. We assessed uptake and completion of a 12-dose, weekly isoniazid-rifapentine (3HP) TPT regimen. Methods: Between February 2018 - March 2019 in Dhaka, community-based TPT using 3HP targeted household contacts of 883 confirmed drug-sensitive pulmonary TB patients. Adhering to WHO guidelines, contacts underwent active TB screening before TPT initiation. Results: Of 3,193 contacts who advised health facility visits for screening, 67% (n=2,149) complied. Among these, 1,804 (84%) received chest X-rays. Active TB was diagnosed in 39 (2%) contacts; they commenced TB treatment. Over 97% of 1,216 contacts began 3HP TPT, with completion rates higher among females, those with more education and income, non-slum residents, and those without 3HP-related adverse events. Adverse events, mainly mild, occurred in 5% of participants. Conclusions: The 3HP weekly regimen, with its short duration, self-administered option, and minimal side effects, achieved satisfactory completion rates. A community-focused 3HP TPT approach is feasible, scalable nationally, and aligns with UNHLM targets.

The nuclear receptor superfamily comprises a large group of proteins with functions essential for cell signaling, survival and proliferation. There are multiple distinctions between nuclear superfamily classes defined by hallmark differences in function, ligand binding, tissue specificity, and DNA binding. In this review, we utilize the initial classification system, which defines subfamilies based on structure and functional difference. The defining feature of the nuclear receptor superfamily is that these proteins function as transcription factors. The loss of transcriptional regulation or gain of functioning of these receptors is a hallmark in numerous diseases. For example, in prostate cancer the androgen receptor is a primary target for current prostate cancer therapies. Targeted cancer therapies for nuclear hormone receptors have been more feasible than others to develop due to ligand availability and cell permeability of hormones. To better target these receptors, it is critical to understand their structural and functional regulation. Given that late-stage cancers often develop hormone insensitivity, we will explore the strengths and pitfalls of targeting other transcription factors outside of the nuclear receptor superfamily such as the signal transducer and activator of transcription (STAT).

SARS-CoV-2 is severe acute respiratory syndrome coronavirus 2 which induces severe pneumonia that has considerable death rate. In this article, we summarised the evolution of SARS CoV-2 from alpha to omicron variant. The origin, transmission capability, and innate immunity potential of the Omicron variety remain unknown in the aftermath of its appearance. It's also unclear whether further varieties based on Omicron may emerge in the future. However, there is no question that the Omicron version of SARS-CoV-2 would not be the last. The COVID-19 pandemic has become more difficult to control due to the constant appearance of new SARS-CoV-2 mutations. We have discussed about the epidemiology, treatment plans for SARS CoV-2 and preventive strategies for future pandemic.

The widely adopted temperature for solid solution heat treatment (ST) for the conventionally fabricated Inconel 718 is 1100 °C for a hold time of 1 h or less. This ST scheme is however not enough to dissolve Laves and annihilate dislocations completely in samples fabricated with Laser metal powder bed fusion (L-PBF) additive manufacturing (AM)-Inconel 718. In spite this, the highest hardness obtained after aging for ST temperatures (970 - 1250 °C) is at 1100 °C/1h [1]. The unreleased residual stresses in the retained lattice defects are potentially affecting other properties of the material. Hence, this work aims to investigate if a longer hold time of ST at 1100 °C will lead to complete recrystallization while maintaining the strength after aging or not. For this study, L-PBF-Inconel 718 samples were ST at 1100 °C at various hold times (1, 3, 6, 9, 16 or 24 h) and aged to study the effects on microstructure and hardness. In addition, a sample was directly aged to study the effects of bypassing ST. The samples (ST and aged) gain hardness by 43 – 49 %, depending on hold time. A high density of annealing twins evolved during 3 h of ST and the quantity only slightly varies for longer ST.

Rheumatoid arthritis (RA) is a chronic, systemic, abnormal inflammatory immune response. It is characterized by the involvement of the synovium and multiple organs and the destruction of joints and articular cartilage. Over the past 30 years, several promising novel compounds and antibodies have been developed for the treatment of RA. The introduction of new drugs and precision medicine for all forms of RA raises several issues related to access to novel treatments by patients, optimal regimen selection, cost-effectiveness, prognosis monitoring and outcome surveillance, particularly with regarding to the development of low drug response rates, drug resistance and adverse side effects. Tremendous attention has been given to the identification of optimized drug combinations for the treatment of RA, particularly in early high-risk vulnerable and early individuals. Addressing these issues requires novel therapeutic approaches with new mechanisms and the establishment of accurate guidelines for drug selection, drug recombination, and non-chemical therapeutic efforts. In this study, we reviewed the most exciting recently established or ongoing novel drugs and methods according to the clinical trial database maintained by the United States National Library of Medicine and discussed the trends in RA drug development and challenges in the treatment, providing a reference significant for the accurate treatment of RA and the research direction in the future.

Introduction: Parkinson’s disease (PD) patients harboring recessive gene variants exhibit a distinct clinical phenotype with an early disease onset and relatively mild symptoms. Data concerning individualized therapy for autosomal recessive PD forms are still scarce. Methods: Demographic and treatment data of a cohort of PD carriers of recessive genes (9 homozygous or compound heterozygous PRKN carriers, 4 Heterozygous PRKN carriers and 3 biallelic PINK1 carriers) were evaluated. Results: The average Levodopa Equivalent daily dose (LEDD) was 806.8±453.5 (range 152-1810) in PRKN carriers and 765±96.6 (range 660-850) in PINK1 carriers. The majority responded to low/moderate doses of Levodopa. The response to Dopamine Agonists (DA) was often favorable both as initial and longitudinal therapy. 8/13 PRKN and 1/3 PINK1 carriers were treated with amantadine successfully, and this also applied to patients who could not tolerate Levodopa or DA. Conclusions: In the era of personalized treatment, the therapeutic approach in recessive PD gene carriers might differ as compared to idiopathic PD. Lower LEDD doses were efficient even in patients with a very long disease duration, while a few patients were doing well without any Levodopa treatment decades after disease initiation. DA or amantadine could be used as a first and main line treatment regimen if well tolerated. Literature data on therapeutic strategies in carriers of pathogenic mutations in recessive PD genes, including device-aided treatments will be further discussed.

The cast grains of the 7055 aluminum alloy were refined by adding Sm + Er, and the proper heat treatment procedure was utilized to further precipitate the rare earth phase in order to increase the alloy's strength and toughness. The grain size, microstructure and phase were characterized by optical microscopes (OM), Scanning electron microscopy - energy spectrum (SEM-EDS), XRD diffractometer (XRD). The macroscopic hardness, yield strength and tensile strength of alloy materials were measured by hardness meter and universal electronic tensile machine. The results shown that the as-cast sample and the heat treatment sample all exist Al10Cu7Sm2 and Al8Cu4Er rare earth phase; But after heat treatment, the volume percentage of the rare earth phase dramatically increased and the dispersion was more unified. When 0.3wt.%Sm and 0.1wt.%Er were added, the grain size could be refined to 53μm. With the increase of the total content of rare earth elements, the refining effect first increased and then decreased. Under 410 oC solid solution for 2h + 150oC aging for 12h, the macroscopic hardness, yield strength, tensile strength and elongation of 0.3wt.%Sm + 0.1wt.%Er+7055 as-cast sample were 155.8HV, 620.5Mpa, 658.1Mpa, and 11.90%, respectively.

Background and Objectives: ACTION-France (Awareness, Care and Treatment In Obesity MaNagement in France) aims to identify the perceptions, attitudes, behaviors, and potential barriers to effective obesity management in France and guide collaborative actions. Methods: ACTION-France is a cross-sectional survey of people with obesity (PwO) and healthcare professionals (HCPs), in France. The PwO and HCP questionnaires ran from 27/09/2022 to 01/02/2023 and from 19/12/2022 to 31/03/2023, respectively. Results: The study, encompassing 1226 PwO and 166 HCPs, reveals a shared recognition of obesity as a chronic condition. However, despite being requested by most PwO, weight-related discussions are surprisingly infrequent, leading to delayed diagnosis and care. PwO and HCPs held different views as to why: HCPs often attributed it to PwO’s lack of motivation or disinterest, whereas PwO avoided them because they felt weight managing was their own responsibility and were uncomfortable discussing it. When weight was discussed, primarily with general practitioners (GPs), discussions mostly focused on physical activity and dietary. However, results identified a strong psychosocial impact of obesity: 42% of respondents reported anxiety-depressive symptoms, and many more hesitated to engage in certain social activities because of their weight. Psychotherapy was only discussed by 55% of HCPs. Pharmaceutical options were also rarely discussed (19.5% of HCPs), though 56.1% of PwO reported they would want to. Conclusions: HCPs’ and PwO’s perceptions differed significantly and need to converge through enhanced communication. A holistic approach, integrating comprehensive training for GPs and psychological comorbidities, would help to bridge perceptual gaps effectively and foster more empathetic and effective patient care.

The co-occurrence of substance use disorders (SUDs) and psychiatric conditions, often referred to as comorbidity or concurrent disorders, presents intricate challenges in both diagnosis and treatment. This comprehensive narrative review aims to synthesize and critically evaluate the existing evi-dence surrounding the management of individuals with comorbid SUDs and psychiatric disorders. Comorbidity in these domains carries profound implications for clinical practice, research, and policymaking, emphasizing the need for a holistic understanding of the intricate dynamics that arise when these conditions coexist. This review explores recent research findings, evidence-based guidelines, and emerging trends within the field, offering valuable insights for clinicians, re-searchers, and policymakers seeking to navigate the complex terrain of comorbidity in substance use and psychiatric disorders.

Early diagnosis of malaria and treatment seeking behavior play key role in controlling and preventing further complication related to malaria disease. Aim of this study was to determine the responses on early malaria diagnosis and treatment seeking behavior among outpatient clients attending at Sekou toure regional referral hospital in Mwanza, Tanzania. Methods: A cross-sectional study was conducted among outpatient client at Sekou-Touré regional referral hospital, convenient simple random sampling used and self-administered questionnaire were used to collect data and data was entered into Microsoft excel and then exported to SPSS version 25.0 for further analysis and presented on the percentages and table. The analysis of strength of relationships between categorical variables was conducted using the Chi-square test. A p-value of ≤ 0.05 was considered to be statistically significant. Results: A total of 192 respondents completed the study with a response rate of 97.6%. The study revealed that Most of the respondents about 90.6% stated they would seek treatment from health facility when symptoms appear. However, only 6.3% seek treatment within 24 hours of onset of illness (p= 0.017). Half of respondents (50.5%) experienced malaria symptoms in the past six months and only 30% seek for treatment at health facility. Preference of health facility, (51%) respondents were going direct to pharmacy to buy medicine for self-treatment. Overall, cost of service, time consumed and distance of health facility especially health center shows significant with such delay. Conclusion: A low proportion of malaria-suspected patients sought treatment within 24 h of fever onset compared to the national target. Distance from the health facility, cost of service and time consumed were found to be predictors of early treatment-seeking behavior for malaria. Strengthening strategies tailored to increasing awareness for communities about malaria, importance of going hospital and early treatment-seeking behavior is essential.

Diagnosis and treatment of Attention-Deficit/Hyperactivity Disorder (ADHD) in women remain insufficient. Fluctuations of reproductive hormones during the premenstrual period, postpartum period and (peri)menopause are neglected, even though they impact ADHD symptoms and as-sociated mood disorders [1]. Therefore, we created a female-specific treatment group for women with ADHD and premenstrual worsening of ADHD and/or mood symptoms. We describe the group programme and underlying rationale, offering a qualitative analysis of the participants’ evaluation. The 7 two-weekly sessions foreground the menstrual cycle and address several ADHD-specific topics in relation to this cyclical pattern: emotional regulation; impulsivity; setting boundaries, and triggers. Concurrently, women track their menstrual cycle and (fluctuating) ADHD and mood symptoms with an adjusted premenstrual calendar. In total, 18 women (25-47yrs) participated in three consecutive groups. We analysed the evaluation of the last group. Participants experienced the group as a safe and welcoming space. Recognition was valued by all. The topics discussed were deemed valuable and the structure suited them well. Completing the premenstrual calendar augmented awareness and recognition of individual cyclical symptoms. Discussing ADHD throughout the lifespan increased self-understanding. Participants took their menstrual cycle more seriously, prioritising self-acceptance and self-care in the luteal phase of the cycle. Exploring a cyclical approach in a group setting seems to be a positive addition to treatment for female ADHD.

Among all the processing technologies of heat-treatable aluminum alloys like 2219 aluminum alloy, using friction stir welding (FSW) as the joining technology and using electromagnetic forming (EMF) for plastic forming technology both have obvious advantages and successful applications. Therefore, there is a broad prospect for the compound technologies which can be used on the 2219 aluminum alloy to manufacture the large-scale thin-wall parts in the astronautic industry. The microstructure and mechanical properties of 2219 aluminum alloy under the process compounded of FSW, heat treatment, and EMF were investigated by means of tensile test, optical microscope (OM), and scanning electron microscope (SEM). The results show that the reduction of strength, which was caused during the FSW process, can be recovered effectively by the post-welding heat treatment composed of solid solution and aging, while the ductility was still reduced after heat treatment. Under the compound technology of FSW, heat treatment, and EMF, the forming limit of 2219 aluminum alloy decreased distinctly due to the poor ductility of the welding joint. A ribbon-pattern, which was formed due to the banded structure caused by FSW process, was found on the fracture surface of welded 2219 aluminum alloy after EMF treatment. During the EMF process, because of the effects of induced eddy current, a unique structure, which was manifested as a molted-surface appearance under the SEM observation, was formed as the material fractured.

Currently, large cell neuroendocrine carcinoma of the lung (LCNEC) is classified as a rare lung cancer subtype, but given the high incidence of lung cancer, the overall number of cases is considerable. The pathologic diagnosis is based on the microscopic appearance of the tumor cells, the amount of intra-tumoral necrosis, the mitotic rate, and the presence of positive neuroendocrine markers identified by immunohistochemistry. Recently, a subdivision into two main categories was proposed based on mutation signatures involving the RB1, TP53, KRAS, and STK11/LKB1 genes, into SCLC-like (small cell lung cancer-like) and NSCLC-like (non-small cell lung cancer-like) LCNEC. In terms of treatment, surgery remains the best option for resectable, stage I–IIIA cases. Chemotherapy and radiotherapy have conflicting evidence. Etoposide/platinum remains the standard chemotherapy regimen. However, based on the newly proposed LCNEC subtypes, some retrospective series report better outcomes using a pathology-driven chemotherapy approach. Encouraging outcomes have also been reported for immunotherapy and targeted therapy, but the real impact of these strategies is still being determined in the absence of adequate prospective clinical trials. The current paper scrutinizes the epidemiology, reviews the reliability of pathologic diagnosis, discusses the need for molecular subtyping, and reviews the heterogeneity of treatment algorithms in LCNEC.

Coronavirus that is also known as COVID-19 disease is produced by SARSCoV-2. This causative agent is highly contagious and can cause potentially fatal pneumonia worldwide with serious public health concerns. In the beginning among infected individuals, most of them were those who were mainly shown to the wet animal market in a big city of China known as Wuhan. So, it was suggested that this was almost certainly the zoonotic source of COVID-19illness. The transitional source of origin and their mode of transmission to humans were not known obviously. Conversely, from human to human rapidly transformation have been confirmed generally. Currently, there is no availability of FDA approved clinically antiviral drugs and/or vaccines to be used against the COVID-19. Afterward, SARS-CoV and MERS-CoV, the occurrence of SARS-CoV-2 has been manifested as the third sketch of an enormously pathogenic coronavirus into human population globally. In this review, we provide a brief overview of the history of COVID-19 in Pakistan up-to 18^th weeks after beginning, current situation, epidemiology, and its impact on the human population. Moreover, we focused on physiological variation during the incubation period, genome analysis of SARS-CoV2, supportive treatment approaches, and safety measures in the Pakistani population, which may be supportive for combating the risk of COVID-19 epidemic. We also reviewed the future approaches for the development of therapeutic interventions and vaccines to cope with the COVID-19 epidemic.

In this paper, the extraction of essential oil (EO) from thyme by consecutive use of ultrasound and microwave treatments is presented. The aim of the study was to apply an ultrasound pre-treatment of thyme leaves to enhance the thymol content and the extraction yield of the EO obtained by microwave-assisted hydro-distillation (MWHD). Compared with the conventional hydro-distillation (CHD), the consecutive use of ultrasound and microwave treatments resulted in a 72% lower extraction time. When the ultrasound pre-treatment (using the ultrasonic processor with an amplitude of 70%) was applied, the EO content was 23% higher compared to the extraction without pre-treatment. The EO samples were analyzed by GC/MS. The results showed that the major component, thymol, varied from 43.54% (by CHD) to 65.94% (by consecutive use of ultrasound and microwave treatments).

This study evaluated the grain size and high organic content from drinking water treatment sludge (DWTS) in the properties of ceramics. Samples were studied using raw and oven dried DWTS at 110 °C in two granulometries (0.180 mm and 0.075 mm), with and without calcination (550 °C), as partial replacement of two soils commonly used in ceramic production. Specimens were prepared with 5, 10, and 20% DWTS and calcined at 950 °C to determine their chemical, physical, mineralogical and mechanical properties. The DWTS reduced the density and increased the absorption and shrinkage of the specimens after calcination. An increase in strength with up to 10% sludge, driven by the presence of fluxing agents, was verified. The processing method had little influence on the properties of ceramic with above 10% of sludge. In conclusion, the use of raw DWTS obtained better results with low energy usage for its reuse.

Introduction: The aim is to investigate the possibility of altering the delusional perceptions of psychotic patients by exposing them to a cognitively flexible virtual environment. A flexible vir-tual reality (VR) environment could challenge and enhance the ability to adapt to changing situa-tions and generate novel solutions to core psychotic symptoms. Materials and methods: A systematic review was conducted using different combinations of keywords in different databases. This study was conducted using the PRISMA statement. Results: There is a growing literature on the use of VR to manipulate and normalise perceptual distortions in psychosis. Over the last decade, the number of published studies on VR in mental health has increased 14-fold. Conclusions: A cognitive flexibility virtual environment can alter delusional perception by ex-posing the person to different scenarios that require them to question their assumptions, test their hypotheses, and revise their beliefs. Commonly used biosensors measure heart rate, skin con-ductance and body temperature in relation to different emotional states. Recently, there has been a major shift towards the use of neuroimaging techniques to better understand the pathophysiology of mental disorders. This is where the new wave of biosensor-integrated virtual reality (VR) sys-tems comes in.

Influence of the volute design parameters on the stable operating range and the performance of a centrifugal compressor was investigated experimentally for the following design conditions. The volute casing surface roughness was changed from 0 to 200 µm in five steps and tested. The axial distance between the casing and the diffuser cascades (clearance) was varied in five steps as C/b₂ = 1.2, 2.4%, 3.6%, 4.8%, and 6% relative to the impeller exit width. The radial distance from the impeller blade exit to the diffuser vane inlet in (vaneless space radius) in six steps as C/r₂ = 1.03, 1.05, 1.07, 1.09, 1.11, and 1. 13 relatives to the rotor outlet radius. The volute outlet geometry of a symmetric and tangent with different area ratios from 0.4 to 0.9. Finally, the compressor has been tested experimentally with different pinched vaned diffuser distances relative to the impeller exit width of bp/b2 =1, 0.98, 0.96, 0.94, 0.92, and 0.9. These testes were carried at different compressor operating conditions, and the time variations of the static pressure were recorded using five high-frequency response pressure transducers. A hot-wire anemometer is used to measure the compressor flow rate. The rotating stall and surge at the vaneless zone after the impeller exit can be detected by analyzing the fluctuations of pressure signals and the power spectrum density by using the Fast Fourier Transformation analysis. The experimental results indicated that the compressor with volute casing surface roughness of 100mm gives about 10.9% enhancements in the stable operating and 1% in pressure rise coefficient. The best axial distance between the diffuser vanes and the casing is 2.4% of the impeller blade height and the compressor in this design gives about 12.4% improvements in the stable working range. The compressor with radial vaneless distance of 1.056 gives improvements of about 16.6% in the surge margin, 2% in the pressure recovery and 4% in pressure rise coefficients. The compressor with a pinched diffuser of b/bp of 0.98 gives an improvement of 20.8% in surge point.

The Corona Virus Disease 2019 (COVID-19) outbreak is becoming pandemic with the highest mortality in people with associated comorbidities. These RNA viruses containing four structural proteins usually use spike protein to enter the host cell. It has been demonstrated that Angiotensin Converting Enzyme 2 (ACE2) ,as a part of renin-angiotensin-aldosterone system (RAAS), acts as a host receptor for the virus which is the main target of therapeutic approaches. However, medications acting on RAAS can lead to serious complications especially in people with diabetes and hypertension. To avoid this, other potential treatment modalities should be used in COVID-19 patients with associated comorbidities.

Ti and Ti alloys are materials usually used in contact with hard tissue for applications such as artificial joints and dental implants. Ti6Al4V is a very common alloy used for dental implants, owing to its good mechanical properties and corrosion resistance. Nevertheless, because of uncertainties regarding the toxicity of vanadium and its influence on the human body, other Ti alloys containing no vanadium and retaining suitable properties are used. In this work Ti6Al4V and Ti6Al7Nb were oxidized in a water solution of calcium acetate (Ca(CH3COO)2) and calcium glycerophosphate (Ca(PO4CH(CH2OH)2) by Plasma Electrolytic Oxidation (PEO) for 20 minutes and then were hydrothermally treated (HTT) in water (pH=7) and in potassium hydroxide (KOH) solution (pH=11) for 2 hours at 200°C in a pressurized reactor. The surface morphologies, elemental composition and phase components were characterized by Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS) and X-Ray Diffraction (XRD), respectively. The surface roughness was measured by Atomic Force Microscope (AFM) and thickness measurements were made by SEM and thickness gauge. Also, corrosion tests were made to evaluate the corrosion behavior of the two alloys. The aim of this study is to compare two viable Ti alloys, Ti6Al4V and Ti6Al7Nb, and to attain on their surface hydroxyapatite (HA) coating improving the osseointegration, as it simulates a human bone.

In this work, we synthesized chitosan grafted-poly acrylic acid (CS-g-PA) through surface-initiated atom transfer radical polymerization (SI-ATRP). We also studied the adsorption process of copper and lead ions onto CS-g-PA surface. Adsorption equilibrium studies indicated pH 4.0 as the best pH for the adsorption process, while the maximum adsorption capacity for Pb2+ ions was 98 mg*g-1 and for Cu2+ was 164 mg*g-1, higher adsorption capacities than chitosan alone (CS), where Pb2+ was only 14.8 mg*g-1and Cu2+ was 140 mg*g-1, respectively. Furthermore, the adsorption studies indicated that Langmuir model describes all the experimental data. All these results suggest that the new CS-g-PA polymers had potential as adsorbent for hazardous and toxic metal ions produced by different industries.

Semisolid casting of Aluminum alloys is growing. For magnesium alloys, Thixomoulding became the dominant process around the world. For aluminium processing, the situation is different as semisolid processing of aluminium is more technically challenging than for magnesium. Today three processes are leading the process implementation, The GISS method, the RheoMetal process and the SEED process. These processes have all strengths and weaknesses and will fit a particular range of applications. The current paper aims at looking at the strengths and weaknesses of the processes to identify product types and niche applications for each process based on current applications and development directions taken for these processes

The use of Information Communication Technologies (ICT) in education brings up new possibilities of promoting the learning and health experiences. In this sense, education contexts of 21st century must consider these two areas of knowledge, especially their integration. This article presents learning practices developed with mobile devices and games, in order to improve learning and well-being in children and adolescents undergoing cancer treatment in non-formal educational setting. The methodology is based on qualitative case studies with content-based data analysis, involving informal interviews and observation methods. The study considers data from 5 patients who participated in the research between 2015 and 2019. The results demonstrate a positive influence of the practices with mobile technologies and games in terms of learning and in the well-being feeling of patients during the treatment.

Post-extubation dysphagia (PED) can lead to serious health problems in critically ill patients. Contrasting its high incidence rate of 12.4% reported in a recent observational study, many ICUs lack routine bedside screening, likely due to limited awareness. This study aimed to establish baseline data on the current approaches and the status of perceived best practices in PED screening and treatment, as well as to assess awareness of PED. A nationwide cross-sectional, online survey was conducted in all fourteen adult ICUs in the Republic of Cyprus in June 2018, with a 100% response rate. Over 85% of ICUs lacked a standard screening protocol for PED. The most commonly reported assessment methods were cough reflex testing and the water swallow test. Treatment approaches included muscle strengthening exercises without swallowing and swallowing exercises. Only 28.6% of ICUs acknowledged PED as a common issue. The study identified significant gaps in awareness and knowledge regarding PED screening and treatment in Greek-Cypriot ICUs. Urgent implementation of comprehensive dysphagia education programs within the units is necessary, and interdisciplinary collaboration among nurses, intensivists, and speech and language therapists is crucial to improve the quality of care provided.

The correlation and comorbidity between depression and chronic pain have been observed for a long time. Generally, it is considered that the two conditions reinforce each other, whereas the causal relationship between them is not clear. However, some evidence suggested that chronic pain may reverse the progression of depression in some cases. This article presents a selective review of clinical and pharmacological relationship between depression and pain, and their interactions at neurochemical and neurobiological levels. In addition, we open a discussion on a recent case report of repeated success of using short but continuous pain (SCP) during meditation as the only treatment for depression, compared to initial success but no remission with other conventional antidepressants on the same patient. Together this review proposes an updated model for depression and its various treatments that is based on synaptic and system homeostasis. More importantly, it suggests that SCP may benefit depression recovery through its properties that are different from either acute or chronic pain and represents a novel research area that has been largely neglected to date.

The amino acids (AAs) and vitamins imbalances are observed in celiac disease (CD). This study evaluated the plasma profile of vitamin A and AAs and the expression level of IL-2, IL-4, IL-10, IL-12 and TGFβ in CD patients. A total of 60 children and adults with CD and 40 healthy controls (HCs) were included. Plasma profile of Vitamin A and AAs and the mRNA expression levels of target genes were assessed. Active adult patients exhibited a decrease in Vitamin A levels (p=0.04) and an increase in IL-2 (p=0.008) and IL-12 (p=0.007) mRNA expression compared to HCs. Treated adult patients showed elevated Serine (p=0.003) and Glycin (p=0.04) levels, as well as increased IL-12 (P<0.0001) mRNA expression, and a decrease in Tryptophan (p=0.04) levels relative to the controls. Additionally, treated adult patients had higher plasma levels of Threonine compared to both active (p=0.04) and control (p=0.02) subjects, and increased mRNA expression of IL-4 (p=0.01) in comparison to active patients. In active children with CD, IL-2 mRNA level was found to be higher than in controls (P<0.0001) and in treated children (p=0.005). Treated children with CD exhibited decreased plasma levels of Tryptophan (p=0.01) and Isoleucine (p=0.01) relative to the controls, and increased mRNA expression of TGFβ (p=0.04) relative to active patients. Managing Retinoic acid levels is crucial to alleviate intestinal inflammation of CD patients. Threonine, tryptophan, and Isoleucine are potential therapeutic options for treating CD, and targeting serine, histidine, tyrosine, and aspartate may hold promise as therapeutic targets for CD patients.

The topography and chemical composition modification of the titanium (Ti) implants play a decisive role in improving biocompatibility and bioactivity, accelerating osseointegration, and, thus, determining clinical success. In spite of the development of surface modification strategies, bacterial contamination is a common cause of failure. The use of systemic antibiotic therapy does not guarantee action at the contaminated site. In this work, we proposed a surface treatment for Ti implant that aim to improve its osseointegration and reduce bacterial colonization in surgery site due to local release of antibiotic. The Ti disks were hydrothermally treated with 3M NaOH solution to form a nanostructured layer of titanate on the Ti surface. Metronidazole was impregnated on these nanostructured surfaces to allow its local release. The samples were coated with poly(vinyl alcohol) - PVA films with different thickness to evaluate a possible control of drug release. Gamma irradiation was used to crosslink the polymer chains leading to a hydrogel layer formation and to sterilize the samples. The samples were characterized by XRD, SEM, FTIR, contact angle measurements, “in vitro” bioactivity, and drug release analysis. The alkaline hydrothermal treatment successfully produced intertwined, web-like nanostructures on the Ti surface, providing wettability and bioactivity to Ti samples (Ti+TTNT samples). Metronidazole was successfully loaded and released from Ti+TTNT samples coated or not with PVA. Although the polymeric film acted as a physical barrier to drug delivery, all groups reached the minimum inhibitory concentration for anaerobic bacteria. Thus, the surface modification method presented is a potential approach to improve the osseointegration of the Ti implant and to associate local drug delivery to dental implants, preventing early infections and bone failure.

The improvement of mechanical properties of cantala fiber and its composites. Treatments including alkali, silane, and the combination of both were carried out to modify the fiber surface. The influence of chemical treatments on fiber properties such as the degree of crystallinity and tensile strength was investigated. A variety of short cantala fiber reinforced rHDPE composites were produced by hot press, and the effect of fiber treatment on the flexural strength of composites was observed. SEM observations also carried out to highlight these changes. The result shows that alkali treatment improves tensile strength and tensile modulus of alkali treated fiber (NF12) which was predicted as a result of the enhancement of the cellulose crystallinity. In contrast, the tensile strength and tensile modulus of silane (SF05) and alkali-silane treated fiber (NSF05) decreased compared to untreated fiber (UF) which is caused by the addition of amorphous material. The tensile strength of alkali-silane treated fiber (NSF05) was lower than alkali treated fiber (NF12), but the composites prepared with NSF05 showed the highest increment of flexural strength of 25.9%. This may be due the combination of alkali and silane treatment helped in the better formation of fiber-matrix interface adhesion.

Technical components should be produced sustainably and are subject to growing demands in terms of durability and reliability. To meet these expectations, the development of thermochemical processes is auspicious. Titanium alloys, which have a comparatively high gas solubility, allow temporary hydrogen (H) loading, often called thermo hydrogen treatment (THT). THT causes lattice deformation and reduces the β transformation temperature. These effects enable an adjustment of the microstructure, which improves the mechanical properties as compared to those produced conventionally. Furthermore, the process is applicable to complex geometries that cannot be surface hardened by mechanical surface treatment techniques. The investigation presented intends to realize a local microstructure gradient in additively via laser-powder bed fusion (L-PBF) manufactured cylindrical Ti–6Al–4V specimens by changing the distribution and morphology of strengthening precipitates as well as the β grain size depending on the distance to the surface, which should improve the material fatigue properties. To evaluate the mechanical properties of such THT-induced microstructure gradients, the resulting change in fatigue life in the LCF and HCF range was determined by stress-controlled cyclic deformation tests. Besides, the resulting microstructure was characterized by means of XRD and TEM. In addition to the additively manufactured and thermo hydrogen treated cylindrical specimens, conventionally produced tube-like specimens were thermo hydrogen treated and examined. For the THT-induced microstructure gradients, numerically simulated H concentration profiles as well as experimentally determined hardness profiles were used for the evaluation of the THT process. The study shows that H-loading at 500°C and H-degassing at 750°C, followed by aging at 550°C, allows the establishment of a microstructure gradient that shows an 8% improvement in fatigue properties compared to a reference condition without THT. The reason for this improvement is an increased volume fraction secondary alpha phase in the near-surface area of the specimens. Moreover, the results show that the process is applicable a tube-like specimen with varying wall thicknesses.

Helicobacter pylori (H. pylori) is a Gram-negative bacterium that colonizes the gastric mucosa and is associated with various gastrointestinal disorders. H. pylori is a pervasive pathogen, infecting nearly 50% of the world's population, and presents a substantial concern due to its link with gastric cancer, ranking as the third most common cause of global cancer-related mortality. This review article provides an updated and comprehensive overview of the current understanding of H. pylori infection, focusing on its pathogenesis, diagnosis, and treatment strategies. The intricate mechanisms underlying its pathogenesis, including virulence factors and host interactions, are discussed in detail. Diagnostic methods, ranging from traditional techniques to advanced molecular approaches, are explored, highlighting their strengths and limitations. The evolving landscape of treatment strategies, including antibiotic regimens and emerging therapeutic approaches, is thoroughly examined. Through a critical synthesis of recent research findings, this article offers valuable insights into the contemporary knowledge of Helicobacter pylori infection, guiding both clinicians and researchers toward effective management and future directions in combating this global health challenge.

Background: Cancer has been one of the most critical health problems during the past decades which require serious consideration, especially in developing countries. Methods: 80 parents of the children with different types of cancers were studied via both questionnaire and person-to-person interview after announcing their informed consent. Results: The highest delay in patients' initial referral was due to the following factors: lack of attention or ignoring the first symptoms, delay in referring to the physician, low economic status and even lack of family support for the patient. In addition, visiting several doctors after the initial diagnosis, uncertainty about the first proposed method, and high cost of treatment can be mentioned as the main causes of delays in the start of treatment. Conclusion: Education plays an important role in identifying the signs of cancer. In addition, proper relationship and cooperation between the health system and physicians as well as provision of adequate information to patients could lead to the long-term cooperation of these patients in continuing their treatment.

Abstract: The aim of this study was to evaluate the effects of solids accumulation on greenhouse gas (GHG) emissions, substrate, plant growth and performance of a horizontal flow (HF) treatment wetland (TW) planted with Phragmites australis (Cav.) Trin. ex Steud. sub sp. australis. The study was carried out in an eight-year-old full-scale HF-TW located in the Mediterranean region (Sicily, Italy). To collect data inside the HF unit, nine observation points (besides the inlet and the outlet) along three 8.5 m long transects (T1, T2, and T3) were identified. The first transect (close to the inlet zone) showed hydraulic conductivity (Ks) reduction of about one order of magnitude higher than the other two. Results highlighted GHG emissions increasing during the summer when temperature and solar radiation were higher than in the rest of the year. Carbon dioxide (CO2) emis-sions decreased from T1 to T3, with maximum monthly values in T1 (21.4 g CO2 m-2 d-1) about double with respect to T2 (12.6 g CO2 m-2 d-1) and T3 (10.7 g CO2 m-2 d-1) observed in July. The CO2 seasonal trend was similar to that of P. Australis growth. Theoretical me-thane (CH4) emissions followed the trend of volatile solids (VS), which was about 3.5 and 4 times in T1 to T2 and T3. The highest CH4 emissions in T1 were probably due to anaerobic bacteria (methanogens) that proliferated in the waterlogged, anoxic part of TW. The pore-clogging affected the chemical oxygen demand (COD) removal efficiency which de-creasing from T1 to T3 for the observation period. Notwithstanding this behaviour, the final effluent quality was very satisfactory with the average value of COD removal efficiency above 90%.

Management of synchronous colorectal cancer with liver metastases (SCLM) is still on debate, regarding timing, indications and complications of the 3 strategies: classic approach (first tumor resection), simultaneous resection and reverse approach (liver first). A retrospective single-centre evaluation of synchronous approach was accomplished, focusing on surgical technique, indications and perioperative complications. Between 2017 and 2020, 31 SCLM patients benefited from synchronously colorectal and hepatic approach: segmental colectomies/rectal resections, simultaneously with liver metastasectomies (associated with radiofrequency ablation). Post-therapeutic imaging monitoring was performed from every 3 to 6 months. There were no perioperative complications related to the combination of the two procedures, low morbidity and zero postoperative mortality. The follow-up period was from 10 to 40 months: 13 patients had no evidence of recurrence, 10 patients had hepatic metastases in regression, 4 of them had signs of peritoneal carcinomatosis and 4 patients showed progression of liver disease; all patients were on chemotherapy. During follow-up 4 patients died. Experience shows that the simultaneous approach of recto-colic and hepatic resections in colo-rectal cancers is a safe procedure, with low morbidity, the limits being dictated by the size of the liver metastases. The results at long-distance must be drawn by further consistent trials.

Objective: To describe outcomes of patients with coronavirus disease 2019 (COVID-19) in the outpatient setting after early treatment with zinc, low dose hydroxychloroquine, and azithromycin (the triple therapy) dependent on risk stratification. Design: Retrospective case series study. Setting: General practice. Participants: 141 COVID-19 patients with laboratory confirmed severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infections in the year 2020. Main Outcome Measures: Risk-stratified treatment decision, rate of hospitalization and all-cause death. Results: Of 335 positively PCR-tested COVID-19 patients, 127 were treated with the triple therapy. 104 of 127 met the defined risk stratification criteria and were included in the analysis. In addition, 37 treated and eligible patients who were confirmed by IgG tests were included in the treatment group (total N=141). 208 of the 335 patients did not meet the risk stratification criteria and were not treated. After 4 days (median, IQR 3-6, available for N=66/141) of onset of symptoms, 141 patients (median age 58 years, IQR 40-67; 73% male) got a prescription for the triple therapy for 5 days. Independent public reference data from 377 confirmed COVID-19 patients of the same community were used as untreated control. 4 of 141 treated patients (2.8%) were hospitalized, which was significantly less (p<0.001) compared with 58 of 377 untreated patients (15.4%) (odds ratio 0.16, 95% CI 0.06-0.5). Therefore, the odds of hospitalization of treated patients were 84% less than in the untreated group. One patient (0.7%) died in the treatment group versus 13 patients (3.5%) in the untreated group (odds ratio 0.2, 95% CI 0.03-1.5; p=0.16). There were no cardiac side effects. Conclusions: Risk stratification-based treatment of COVID-19 outpatients as early as possible after symptom onset with the used triple therapy, including the combination of zinc with low dose hydroxychloroquine, was associated with significantly less hospitalizations and 5 times less all-cause deaths.

We present the AI-discovered aetiology of COVID-19, based on a precise disease model of COVID-19 built under five weeks that best matches the epidemiological characteristics, transmission dynamics, clinical features, and biological properties of COVID-19 and consistently explains the rapidly expanding COVID-19 literature. We present that SARS-CoV-2 implements a unique unbiased survival strategy of balancing viral replication with viral spread by increasing its dependence on (i) ACE2-expressing cells for viral entry and spread, (ii) PI3K signaling in ACE2-expressing cells for viral replication and egress, and (iii) viral-non-structural-and-accessory-protein-dependent immunomodulation to balance viral spread and viral replication. We further propose the combination of irinotecan (an in-market topoisomerase I inhibitor) and etoposide (an in-market topoisomerase IIinhibitor) could potentially be an exceptionally effective treatment to protect critically ill patients from death caused by COVID-19-specific cytokine storms triggered by sepsis, ARDS, and other fatal comorbidities.

Locally Advanced Breast Cancer (LABC) is a complex disease that requires a multidisciplinary approach. Neoadjuvant Chemotherapy (NAC) is usually performed in order to achieve loco-regional radical resection; although its importance in the multidisciplinary approach to LABC is well recognised, a small number of patients show Progressive Disease (PD). No standard Salvage Treatment (ST) has been defined and different strategies can be adopted, such as second line systemic therapies, radiation therapy, and surgery. Herein a case of LABC in PD during NAC is reported with a literature review, with the aim of highlighting the importance of a tailored multidisciplinary treatment in each patient.

Statistical analysis of mechanical properties of thin-walled samples (~500 microns) obtained by selective laser melting from AlSi10Mg material and subjected to heat treatment for 1 hour at temperatures from 260 °C to 440 °C (step of aging temperature change 30 °C) has shown that the maximum strain hardening in the stretching diagram section from yield strength to tensile strength is achieved at the heat treatment temperature equal to 290 °C. At carrying out of correlation analysis statistically significant positive correlation between deformation corresponding to yield strength and the sum of heights of the largest protrusions and depths of the largest depressions of the surface roughness profile within the basic length of the sample (Rz) and the full height of the surface roughness profile (Rmax) was established. It was found that the reason for the correlation is the presence of cohesive states between the extreme values of the surface roughness profile that persist along the entire length of the specimen.

Acne Vulgaris is a multifactorial skin disorder affecting many adolescents involving a complex array of factors. Previous extensive research has delved into the correlation between acne outbreaks and specific diet consumption, and while there have been a variety of treatment indications for decreasing acne in patients, many do not involve the significant impact a holistic approach can take. This case reports on the relationship between cystic acne and dietary habits, presenting a possible treatment approach for acne vulgaris by eliminating dairy consumption.

Tick-borne diseases are among the most common vector-borne diseases. These include various infections caused by viruses, bacteria, rickettsiae, spirochetes and protozoa. The aim of our review is to present the relationship between the clinico-epidemiological aspect of some of the emergency tick-borne diseases and their diagnosis, treatment and prevention. We will review three diseases- anaplasmosis, babesiosis and ehrlichiosis. Anaplasmosis and ehrlichiosis are caused by small gram-negative obligate intracellular alphaproteobacteria in the order Rickettsiales, family Anaplasmataceae. The prognosis of disease depends on early diagnosis and proper treatment. The symptoms of anaplasmosis largely overlap with those of ehrlichiosis. Babesiosis is a malaria-like disease that is caused by intraerythrocytic protozoa. Like malaria, the disease proceeds with hemolysis and its severity is determined by the parasitemia. Treatment of babesiosis involves the use of antimalarial agents and antibiotics, most commonly in a combination. Understanding the clinical, epidemiological and laboratory characteristics of tick-borne diseases is crucial for their prevention, diagnosis and treatment.

Staphylococcus aureus(S. aureus) is associated with mastitis in dairy cows, this study investigates the therapeutic effect of maggot antimicrobial peptides on S. aureus induced mastitis in mice. The maggot AMP was isolated and purified, tested for antimicrobial activity, and used to treat a pathological model of rat mastitis. The concentration of 1.5mg/（Kg. BW）AMP was selected as intramammary treatment in S. aureus-induced mastitis in mice. The mice were divided into four groups of 30 mice each: group I (healthy control), group II (disease control), group III (AMP), and group IV (ciprofloxacin). To evaluate the therapeutic efficacy of maggot AMP in mastitis induced by S. aureus based on clinical presentation, mammary gland structure, bacterial load, histopathology, and cure. During the 7-day treatment period, all the mice in Group II died in the afternoon of the fifth day, and the clinical signs of the mice in Group III began to improve on the third day, as evidenced by the gradual recovery of the mice's mental status, dietary intake, and water intake. During the treatment period, the bacterial load count of Group III was significantly lower than that of Group II but higher than that of Group IV, while the bacterial load count of Group III gradually decreased and approached that of Group IV from the fifth to the seventh day. The levels of TNF-α in groups III and IV were significantly lower than those in group II, suggesting that maggot AMP has a certain inhibitory effect on TNF-α. Treatment with AMP@ 1.5 mg/(Kg. BW) showed restoration of clinical signs, reduced bacterial load, and lower TNF-α levels in mice, leading to significant improvement in histopathological changes as compared to disease controls. The final cure rate was 40% for mice in Group III compared to 70% for mice in Group IV, compared to all mice in Group II that died. From this study, it can be concluded that maggot AMP can be used as a potential alternative treatment option to antibiotics for the treatment of bovine mastitis.

Rheumatoid arthritis (RA) occurs more frequently in women than in men, and the studies that have addressed clinical and prognostic differences between sexes are scarce and have contradictory results and methodological problems. The present work aims to evaluate sex and gender-related differences in the clinical expression and prognosis of RA as well as the impact on psychosocial variables, coping behavior, and healthcare use and access. By identifying between-sex differences and gender-related outcomes in RA, it may be possible to design tailored therapeutic strategies that consider the differences and unmet needs. Being sex, together with age, the most relevant biomarker and health determinant, a so-called personalized medicine approach to RA must include clear guidance on what to do in case of differences.

(1) Background: Melanoma is the most aggressive tumor located at the skin level and the man-agement of this pathology requires a correct staging as well as a modern oncological treatment, adapted to each patient. The main objective of the study is to determine the variability of lymphatic drainage in the case of melanomas located on the trunk; (2) Methods: This retrospective study in-cluded 62 cases of melanoma located on the trunk operated between July 2019 and March 2023 in which SLNB was performed and a total of 84 lymph node were excised; (3) Results: Patients had an average age of 54.5 years old, while melanomas had a mean Breslow index of 2.3 mm. The distri-bution of trunk melanomas was: upper trunk 54 cases, lower trunk 30 cases (64.3 % vs. 35.7%). The type of anesthesia chosen was general anesthesia in 53 cases, respectively spinal anesthesia in 9 cases (85.5% vs. 14.5%, p<0.001). The number of sentinel lymph nodes was 54 for melanomas lo-cated on the upper trunk, 8 cervical and 46 axillary, respectively 30 sentinel lymph nodes in cases of melanomas of the lower trunk, 16 at the axillary level and 14 at the inguinal level; (4) Conclusions: Lymph node involvement in melanoma represents an important prognostic factor and the different lymphatic drainage pathways in relation to the location of the primary tumor represents an im-portant objective in the management of this pathology.

In the field of orthodontics, providing patients with accurate treatment time estimates is of utmost importance. As orthodontic practices continue to evolve and embrace new advancements, incorporating machine learning (ML) methods becomes increasingly valuable in improving orthodontic diagnosis and treatment planning. This study aimed to develop a novel ML model capable of predicting the orthodontic treatment duration based on essential pre-treatment variables. Patients who completed comprehensive orthodontic treatment at the Indiana University School of Dentistry were included in this retrospective study. Fifty-seven pre-treatment variables were collected and used to train and test 9 different ML models. The performance of each model was assessed using descriptive statistics, intraclass correlation coefficients, and one-way analysis of variance tests. Random Forest, Lasso, and Elastic Net were found to be the most accurate, with a mean absolute error of 7.27 months in predicting treatment duration. Extraction decision, COVID, intermaxillary relationship, lower incisor position, and additional appliances were identified as important predictors of treatment duration. Overall, this study demonstrates the potential of ML in predicting orthodontic treatment duration using pre-treatment variables.

: Microbial fuel cell (MFCs) devices utilise the metabolic processes of bacteria to generate electricity from various organic substrates. Due to the enormous amount of energy that organic waste produces, scientists are highly interested in advanced MFCs. MFCs serve as a multidisciplinary research platform at the engineering and natural sciences intersection. MFCs have various uses besides being used as energy sources, such as sensing capabilities. Despite showing considerable promise, only a few marine sediment MFCs have been deployed in real-world applications to supply current for low-power devices. It is now required to maintain track of the work being done by research groups worldwide and regularly compile significant discoveries due to the rising quantity of research publications. Review papers are a traditional beginning point for a literature review for new scholars. This review is a fast reckoner that directs readers to pertinent reviews and research publications detailing significant advances in microbial fuel cell research during the previous two decades. An overview of key advances in MFC research over the past two decades is provided as a quick reference in this review article. In addition, the report identifies research gaps that, if filled, could bring this technology closer to real-world use.

Sepsis is a life-threatening condition caused by a dysregulated host response to an invading pathogen such as multidrug-resistant bacteria. Despite recent advancements, sepsis is a leading cause of morbidity and mortality, resulting in a significant global impact and burden. This condition affects all age groups, with clinical outcomes depending mainly on timely diagnosis and appropriate early therapeutic intervention. Because of the unique features of nanosized systems, there is a growing interest in developing and designing novel solutions. Nanoscale-engineered materials allow a targeted and controlled release of bioactive agents, resulting in improved efficacy with minimal side effects. Additionally, nanoparticle-based sensors provide a quicker and more reliable alternative to conventional diagnostic methods for identifying infection and organ dysfunction. Despite recent advancements, fundamental nanotechnology principles are often presented in technical formats that presuppose advanced chemistry, physics, and engineering knowledge. Consequently, clinicians may not grasp the underlying science, hindering interdisciplinary collaborations and successful translation from bench to bedside. In this review, we abridge some of the most recent and most promising nanotechnology-based solutions for sepsis diagnosis and management using an intelligible format to stimulate a seamless collaboration between engineers, scientists, and clinicians.

The cavovarus deformity is characterized by a pathologic longitudinal arch elevation caused by a severe hindfoot varus and forefoot equinus deformity. This disorder includes multiple anomalies and therapies and affects 25% of the population. Cavus feet usually indicate neurologic illness, which affects sensory and motor nerves. Clinical and radiological evaluations are needed to establish each patient's optimum therapy. Failure to identify a neurologic illness may lead to inappropriate surgical treatment, recurrence, and reconstructive failure. In progressive anomalies, surgical procedures must be performed quickly in a phased protocol to prevent the malalignment from worsening. Soft tissue surgeries, osteotomies, and arthrodesis are surgical options for patients. To aid and lead practitioners in selecting the most appropriate therapy for their patients daily, we have included the most common therapeutic options currently available in this article.

Coagulation is the most sensitive step in drinking water treatment. Underdosing may not yield the required water quality, whereas overdosing may result in higher costs and excess sludge. Traditionally, the coagulant dosage is set based on bath experiments performed manually. Therefore, this test does not allow real-time dosing control, and its accuracy is subject to operator experience. Alternatively, solutions based on machine-learning (ML) have been evaluated as a computer-aided alternative. Despite these advances, there is open debate on the most suitable ML method applied to the coagulation process, capable of the most highly accurate prediction. This study addresses this gap, where a comparative analysis between ML methods was performed. As a research hypothesis, a novel data-driven fuzzy inference system (FIS) should provide the best performance due to its ability to deal with uncertainties inherent to complex processes. Although ML methods have been widely investigated, only a few studies report hybrid neuro-fuzzy systems applied to coagulation. Thus, to the best of our knowledge, this is the first study thus far to address the accuracy of this novel data-driven FIS for such application. The novel FIS provided the smallest error (0.86), indicating a promising alternative tool for real-time and highly accurate coagulant dosing in drinking water treatment.

The spray drying process causes the buildup of an unspecified and unique pattern of wall deposits on the wall. The powder recovery of fruit juice by spray dryer is associated with stickiness problems because of the nature of food which contains low molecular weight sugars and organic acids, which have a low glass transition temperature (T_g). The surface properties of oxygen plasma treated-PTFE substrate were evaluated by using the different parameters of Plasma Enhanced Chemical Vapour Deposition (PECVD) prior to spray drying analysis. In this study, the fabrication method of nearly perfect superhydrophobic surfaces through plasma treatment with oxygen gas was generated and utilized. The plasma-treated PTFE were deposited from a fixed flow rate of oxygen gas with 30 cm³/min by varying the deposition time from 1 to 15 minutes to induce the hydrophobic surface of the PTFE substrate. The characterization techniques used to determine the morphology and chemical bonding of the substrate are field emission scanning electron microscopy (FESEM) and Fourier transform infrared spectroscopy (FTIR), respectively. The hydrophobicity of the glass samples was determined by the water droplet contact angle. Sample prepared at radio frequency (RF) power of 90W for 15 minutes duration of treatment time showed porous and spongy like microstructure which correlates with the best performance of a good contact angle which creates the superhydrophobicity regime (171^o). Surface morphology analysis using scanning electron microscopy (SEM) showed changes in its roughness in the surface-treated glass substrate. The success of this method produced a huge potential for solving most of the food processing issues which relate to biofouling (e.g., powder stickiness) that would otherwise struggle to improve high productivity and recovery.

As the problem of traction injuries to brachial plexus is a common one and of high socio-economic significance, the analysis of the surgical outcomes in patients with this pathology is significant for neurosurgery, neurology, traumatology-orthopedics, and rehabilitation. The aim of the research is to compare the short-term outcomes of using various surgical methods for managing patients with closed traction injuries of brachial plexus. Material and methods. The research involved 61 patients with closed traction injury of brachial plexus divided into two groups homogeneous in sex, age and severity of their neurological deficit: Group I – 33 patients who underwent microsurgical neurolysis, Group II – 28 patients who underwent microsurgical neurolysis combined with one-level electrostimulation. The dynamic assessment of clinical and functional status of upper limbs was performed using scale methods and electrophysiological monitoring. Results. The research revealed a more evident recovery of the upper limb function in Group II patients suggesting the method of microsurgical neurolysis combined with electrostimulation to be preferable in case of closed traction injuries to brachial plexus. Conclusion. The combination of microsurgical neurolysis with one-level electrostimulation improves the short-term outcomes of surgical treatment in patients with closed traction injuries of brachial plexus due to a sooner decrease in pain in postoperative period, and positive dynamics of clinical and electrophysiological parameters.

The granulomatous cheilitis (GC) presents a heterogeneous group of disorders characterised by a granulomatous inflammation/reaction of the lips to various stimuli. Numerous etiologies have been proposed, including genetic, immunologic, allergic and infectious. Among the secondary causes of GC, a distant infection by Mycobacterium tuberculosis should be considered. The GC could be the clinical presentation of a tuberculide resulting from a hypersensitivity reaction to an underlying focus of active or latent tuberculosis infection (LTBI). This communication describes a woman diagnosed with GC related to LTBI, who responded well to antituberculosis treatment.

Purpose: To determine whether pre-surgical treatment using long-acting somatostatin analogues (SSAs) may improve surgical outcomes in acromegaly. Methods: Retrospective study of 48 patients with acromegaly operated by endoscopic transsphenoidal approach and for first time. Surgical remission was evaluated based on the 2010 criteria. Results: Most patients, 83.3% (n=40), harboured macroadenomas and 31.3% (n=15) invasive pitu-itary adenomas. Fourteen patients were treated with lanreotide LAR and 6 with octreotide LAR, median monthly doses of 97.5 [range 60-120] and 20 [range 20-30] mg, respectively, for at least 3 months preoperatively. Presurgical variables were comparable between pre-treated and un-treatred patients (P>0.05). Surgical remission was more frequent in those pre-treated with monthly doses ≥90 mg of lanre-otide or ≥30 mg of octreotide than in untreated or pre-treated with lower doses (OR=4.64, P=0.025). However, no differences were found between pre-treated and untreated patients when lower doses were included or between those treated for longer than 6 months compared to those untreated or pre-treated for shorter than 6 months. Similarly, no differences were found either in terms of surgical or endocrine complications (OR=0.65, P=0.570)), independently of the doses and the duration of SSA treatment (P>0.05). Conclusions: The dose of SSAs is a key factor during pre-surgical treatment, since the beneficial effects in surgical remission were observed with monthly doses equal or higher than 90 mg of lanreotide and 30 mg of octreotide, but not with lower doses.

Abstract: As a risk factor, obesity is a threat to human well-being and related metabolic disorders such as diabetes mellitus and dyslipidemia. adipogenesis is defined as the proliferation and maturation of adipocyte predecessor cells to adipocyte. As the adipogenesis process decides adipocyte production, it may be considered a therapeutic target for obesity and obesity-related disorders. White adipose tissue abnormal expansion increases the size and number of adipocytes. For that reason, this review aims to spot the molecular mechanisms implicated in adipogenesis that lead to application in the therapeutic targets. Keywords: adipogenesis, signaling pathways, anti-obesity treatment, obesity

The mechanical engineering requires heat treatment after rough machining to reach the mechanical strength, but the heat treatment can induce workpiece deformation, so that the workpiece cannot be reworked. In this study, the plasma was integrated with a lathe, and the on line heat treatment was performed to achieve the mechanical strength and hardness, so as to reduce the machining process and handling. However, for on line heat treatment, it is important to study the machine and plasma parameters of the lathe and plasma, and the research method is used eventually to optimize the process, reduce the machining cost and machining error. The variable factors in surface on line real-time heat treatment are revolution, feed rate and current, the objective function is the hardness of mechanical properties. In the screening experiment, the interaction of factors was discussed using full factorial experiment. The Central Composite Design was combined with the Lack-of-Fit test for optimization experiment, the R2 coefficient was used to determine whether the regression model is appropriate. The optimum parameters were derived from the contour diagram and response surface diagram. The experimental results show that the significant factors include revolution, feed rate and current, the optimum parameters include revolution 168rpm, feed rate 0.068mm/rev and current 86A. The experimental results of optimum parameters show that the surface hardness is increased from 306HLD to 806HLD, the surface hardening effect is enhanced by 163%, so the on line real-time heat treatment equipment has a best hardening effect.

The article discusses the results of investigations performed during a thermo-mechanical treatment of forgings made of chromium-molybdenum 42CrMo4 grade steel. The treatment was realized during a regular series production. The forging process was combined with a heat treatment carried out directly after forging on a specially adapted station. Such a production technology will make it possible to eliminate the step of repeated heating of the forgings. On the example of an element of a steering gear, it was demonstrated how it is possible to perform an isothermal annealing process starting from the temperature at which the trimming of the forgings ends. During the cooling of the forgings, it is enough to maintain the temperature at the proper level in order for the exothermal phase transformation of austenite into pearlite to take place. With an appropriate design of the processing line, the heat released during the transformation could be used to maintain the applied temperature, thus limiting the consumption of energy needed to power the devices. The test results show that, with the properly selected temperature of isothermal annealing, it is possible to obtain an equilibrial ferritic-pearlitic structure in the required hardness scope. Introducing such a solution into the industrial practice would allow significant savings of the energy used for the heat treatment.

Mycobacterium abscessus is a non-tuberculous mycobacteria notoriously known for causing severe, chronic infections. Treatment of these infections is challenging due to either intrinsic or acquired resistance of M. abscessus to multiple antibiotics. Despite prolonged poly-antimicrobial therapy, treatment of M. abscessus infections often fails, leading to progressive morbidity and eventual mortality. Great research efforts are invested in finding new therapeutic options for M. abscessus. Clofazimine and rifabutin are known anti-mycobacterial antibiotics, repurposed for use against M. abscessus. Novel antimicrobials active against M. abscessus include delamanid, pretomanid and PIPD1 and the recently approved beta-lactamase inhibitors avibactam, relebactam and vaborbactam. Previously unused antimicrobial combinations e.g. vancomycin-clarithromycin and dual beta-lactam therapy have been shown to have synergistic effect against M. abscessus in experimental models, suggesting their possible use in multiple-drug regimens. Finally, engineered phage therapy has been reported to be clinically successful in a severe case of disseminated M. abscessus infection. While many of these experimental therapeutics have shown activity against M. abscessus in vitro, as well as intracellular and/or animal models, most have little if any evidence of effect in humans infections. Clinical studies of M. abscesssus treatments are needed in order to reliably determine the value of their incorporation in therapeutic regimens.

Background: Although no specific treatment for COVID 19 has been proven effective yet, some drugs with in vitro potential against SARS-CoV-2 virus have been proposed for clinical use. Hydroxychloroquine has in vitro anti-viral and immunomodulatory activity, but there is no current clinical evidence of its effectiveness on the outcome of the disease. Methods: We enrolled all 18-85 years old inpatients from Central Defense Hospital, Madrid, Spain, who were hospitalised due to COVID-19 and had a definitive outcome (either dead or discharged). We used a statistical survival analysis. Results: We analysed 220 medical records. 166 patients met the inclusion criteria. 48,8 % of patients not treated with HCQ died, versus 22% in the group of hydroxychloroquine (p=0,002). According to clinical picture at admission, hydroxychloroquine increased the mean cumulative survival in all groups from 1,4 to 1,8 times. This difference was statistically significant in the mild group. Conclusions: in a cohort of 166 patients between 18 to 85 years hospitalised with COVID-19, hydroxychloroquine treatment with an initial loading dose of 800mg improved patient survival when admitted in early stages of the disease. There was a non-statistically significant trend towards survival in all groups, which will need to be clarified in subsequent studies.

Plastics are naturally hydrophobic materials so, in order to employ flotation for the separation of plastic mixtures, the use of appropriate wetting agents is mandatory. In this work, the effect of pretreatment with alkaline solutions of sodium hydroxide on the floatability of four plastics (PET, PS, PMMA and PVC) was studied. The influence of NaOH concentration, treatment time and temperature of the alkaline solution, and influence of particle size was analyzed. Results showed that alkaline treatment had a strong effect on PET floatability, some effect on floatability of PMMA and PVC and no effect on floatability of PS. Plastics floatability decreased with the increase of NaOH concentration, temperature and treatment time of the alkaline solution. Based on flotation behavior of simple plastics, flotation separation after alkaline treatment of bi-component mixtures of PET with PS and PVC was achieved efficiently. The best separation was obtained for PET/PS mixture, a floated with a grade of 98% in PS and a sunk with a grade of 100% in PET. PET/PMMA mixture led to the worst separation. For PET/PMMA and PET/PVC mixtures, flotation separation improved with the decrease of the particles size.

The shortage of donor organs is a major global concern. Organ failure requires the transplantation of functional organs. Organ donors are preserved in warm or cold ischemia. Ischemia and reperfusion damage the organs, due to the lack of oxygen during the ischemia step and the oxidative stress during the reperfusion step. Different methodologies were developed to prevent or diminish the level of injuries. Preservation solutions were first developed, followed by the addition of chemical compounds. In addition of inhibitors of mitogen activated protein kinase, inhibitors of the proteasome, mesenchymal stem cells started to be used 13 years ago to prevent or diminish the organ’s injuries. Mesenchymal stem cells (e.g bone marrow stem cells, adipose derived stem cells) have proven to be powerful tools in repairing damaged organs. This review will focus on the use of some bone marrow stem cells, adipose derived stem cells and umbilical cord stem cells on preventing or decreasing the injuries due to ischemia-reperfusion.

In this investigation steel P355NH has been successfully cladded with Inconel 625 through the method of explosive welding. Explosively welded bimetal clad-plate was subjected to the two separated post weld heat treatment processes: stress relief annealing (at 620oC for 90 minutes) and normalizing (at 910oC for 30 minutes). In order to analyze the microstructure of the joint in the as-welded state and to investigate the influence of the post weld heat treatment on it, the light and scanning electron microscope observations and microhardness analysis have been performed. The examination of the diffusion zone microstructure has been performed by using the scanning transmission electron microscope. It was stated that obtained joint has characteristic wavy-shape geometry with the presence of the melted zones and severe deformed grains of both joined materials. Strain hardening of the materials in joint zone was established with microhardness analysis. In both of the heat treatments the changes in the grain structure have been observed. The normalizing heat treatment has the most significant impact on the microstructure of the joint as well as the concentration of the chemical elements in the joint zone. It was reported that due to normalizing the diffusion zone has been formed together with precipitates in the joint zone. The analysis of the diffusion zone images leads to the conclusion that the diffusion of alloying elements from Inconel 625 to steel P355NH takes place along the grain boundaries with additional formation of the voids in this area. The precipitates in Inconel 625 in the joint zone are two type of carbides – chromium-rich and molybdenum-rich. Scanning transmission electron microscope observation of the grain microstructure in the diffusion zone shows that this area consists of equiaxed grains (from the side of Inconel 625 alloy) and columnar grains (from the side of steel P355NH).

The fatigue strength of the hot work steel depends on various factors, including the mechanical, properties and behavior and bulk and the surface under layer, the microstructural features as well as heat treatments. The influence of a series of heat treatments on the fatigue strength of H13 hot work steel was investigated. Different preheating, quenching and tempering treatments were applied to four sets of specimens and fatigue tests were conducted at room temperature using a rotating bending test machine. All heat treatments resulted in a certain improvement of the fatigue strength. Highest fatigue strength obtained by applying a double tempering heat treatment (first tempering at 550 °C for two hours and second tempering at 610 °C for two hours) after initial preheating and quenching. One tempering treatment (550 °C for two hours after preheating and quenching) did not significantly improve the fatigue strength.

Development of carbon nanomaterials for adsorption thus removal of organic pollutants from water is a progressive research subject. In this regard, carbon nanomaterials with bifunctionality towards polar and non-polar or even amphiphilic undesired materials is indeed attractive for further study and implementation. Here, we created carbon buckypaper adsorbents comprising amphiphilic (oxygenated amorphous carbon (a-COx)/graphite (G)) nanofilaments that can dynamically adsorb organic biomolecules (i.e. urease enzyme) and thus purify the wastewaters of relevant industries. Given the dynamic conditions of the test, the adsorbent was highly efficient in adsorption of the enzyme (88%) while permeable to water (2382 L.h-1.m-2), thus holds a great promise for further development and upscaling. A subsequent citric acid functionalization declined selectivity of the membrane to urease, implying the biomolecules adsorb mostly via graphitic domains rather than oxidized, polar amorphous carbon ones. The devised platform i.e. the urease functionalized buckypaper is optimally conductive (13 S.cm-1) and can be further employed as a biosensor. Accordingly, water treatment can be linked to biosensing via a nanostructured membrane.

Several common and functional genes are known to contribute to responsiveness to blood pressure (BP) therapy. BP therapy is typically guided by algorithms that do not include a patient’s genetic information. This study aimed to determine the impact of a multi-organ genetic panel on BP response to pharmacotherapy. Eighty-six patients completed one study visit consisting of a buccal swab collection, measurement of office BP, and a medical chart review for BP history. Genes analyzed included those that encode for one drug metabolizing enzyme, renal Na+ handling, vascular, and cardiac function. Relationships between genotype and control of BP (<140/<90), ∆ systolic BP, ∆ diastolic BP, and ∆ mean arterial BP were assessed. SLC12A3 resulted in a significant association between the target drug and the functional genotype for BP control (<140/<90 cut off) (p<0.05). Conversely, three of five renal genotypes were associated with BP control using 120/80 as a cut-off (p<0.05). Three of four cardiac genotypes were associated with the BP control at <140/<90, with one being statistically significant (position 49 of ADRB1). Only one vascular genotype was predictive of blood pressure control at <140/<90. We found a significant drop in mean BP from baseline in six genes, three important in the diuretic response and three in β-blockade (p<0.05 on target drug vs. not). These results demonstrate that a multi-gene panel for renal Na+ handling, vascular function, and cardiac output may influence the BP response to therapy, but larger studies with more statistical power are needed.

The combination of interstitial hyperthermia treatment (IHT) with high dose rate brachytherapy (HDR-BT) for prostate cancer treatment and has the potential to improve clinical outcome, since it highly enhances the efficiency of cell kill, especially when applied simultaneously. Therefore, we have developed the ThermoBrachy applicators. To effectively apply optimal targeted IHT, treatment planning is considered essential. However, treatment planning in IHT is rarely applied since it is regarded difficult to accurately calculate the deposited energy in the tissue in a short enough time for clinical practice. In this study, we investigated various time-efficient methods for fast computation of the electromagnetic (EM) energy deposition resulting from the ThermoBrachy applicators. Initially, we investigated the use of an electro-quasistatic solver. Next, we extended our investigation to the application of geometric simplifications. Furthermore, we investigated the validity of the superpositioning principle, which can enable adaptive treatment plan optimization without the need for continuous recomputation of the EM field. Finally, we evaluated the accuracy of the methods by comparing them to the golden standard Finite-Difference Time-Domain calculation method using gamma-index analysis. The simplifications considerably reduced the computation time needed, improving from &gt;12 h to a few seconds. All investigated methods showed excellent agreement with the golden standard by showing a &gt;99% passing rate with 1%/0.5 mm Dose Difference and Distance-to-Agreement criteria. These results allow the proposed electromagnetic simulation method to be used for fast and accurate adaptive treatment planning.

Starch is widely applied in various industrial sectors, including the food industry. Starch is used as a thickener, stabilizer, or emulsifier. However, arrowroot starch generally has weaknesses, such as unstable under heating and acidic conditions, which are generally applied to processing in the food industry. Modifications were applied to improve the characteristics of native arrowroot starch. In this study, arrowroot starch was modified by heat-moisture treatment (HMT), octenylsuccinylation (OSA), and dual modification between OSA and HMT in a different sequence, namely HMT followed by OSA, and OSA followed by HMT. This study aims to determine the effect of different modification methods on the physicochemical and functional properties of native arrowroot starch. The result shows that both single HMT and dual modification caused damage to native starch granules, such as the formation of cracks and roughness. Especially for single OSA treatment, there is no significant change in granule morphology after modification. All modification treatments did not change the crystalline type of starch but reduced the RC of native starch. Both single HMT and dual modifications (HMT-OSA, OSA-HMT) increased pasting temperature and setback, conversely decreasing the peak and breakdown viscosity of native starch. Whereas, single OSA has the opposite trend compared with the other modifications. HMT played a greater role in increasing the thermal stability and retrogradation ability of arrowroot starch. Both single modifications (HMT and OSA) increase the hardness and gumminess of native starch, conversely for dual modifications. HMT has a greater effect on color characteristics, where decreased the lightness and whiteness index of native arrowroot starch. Single OSA modification increased swelling volume higher than dual modification. Both single HMT and dual modifications increase water absorption capacity and decrease the oil absorption capacity of native arrowroot starch.

Traumatic pneumothorax (PTX) occurs in up to 50% of patients with severe polytrauma and chest injuries. Patients with traumatic PTX with clinical signs of tension physiology and hemodynamic instability are typically treated with an urgent decompressive thoracostomy, tube thoracostomy, or needle decompression. There is recent evidence that non-breathless patients with hemodynamically stable traumatic PTX can be managed conservatively through observation or a percutaneous pigtail catheter. We present here a 52-year-old woman who presented to the emergency department with 55 mm traumatic PTX. Following aspiration of 1500 ml of air, clinical improvement was immediately observed, allowing the patient to be discharged shortly thereafter. In hemodynamically stable patients with posttraumatic PTX, without specific risk factors or oxygen desaturation, observation or simple needle aspiration can be a reasonable approach. We aimed in this article to review the available literature on needle aspiration and conservative treatment of traumatic pneumothorax. A total of 12 studies were selected out of 190 articles on traumatic PTX, where conservative treatment versus chest tube decompression was compared. Our case report demonstrated that even a large PTX in a hemodynamically stable patient without other risk conditions, can be successfully treated conservatively with simple needle aspiration to avoid tube thoracostomy complications.

In the recent years, biochar has emerged as a remarkable biosourced material for addressing global environmental, agricultural, biomedical, and energy challenges. However, the performances of biochar rest in part on finely tuning its surface chemical properties, intended to obtain specific functionalities. In this review, we tackle surface treatment of biochar with silane and other coupling agents such as diazonium salts, titatantes, ionic/non-ionic surfactants, as well as nitrogen-containing (macro)molecules. We summarize the recent progress achieved mostly in the last five years, and correlate the nature and extent of functionalization to eye catchy end applications of the surface engineered biochar.

Proteins possess complex three-dimensional structures, and these structures are stable only within specific ranges of temperature which mostly correspond to the temperature ranges of the host organisms. However, few exceptional proteins, called heat-stable proteins, are stable at temperatures that are substantially higher than those tolerated by the host organisms themselves. Most of the heat-stable proteins possess heat stability to perform their functions at high temperatures, but some of them are intrinsically heat-stable due to their structure. Heat-stable proteins are usually divided into three or four groups depending upon the intricacies of their structures and thermal behaviors. Their peculiar property, i.e. heat-stability, makes them very valuable in applications such as polymerase chain reaction, industrial processes requiring high temperature, and protein engineering. Heat-stability also makes it feasible to purify such proteins, from the rest of the heat-labile proteins, using a simple heat-treatment method. Moreover, heat treatment can be used as a combined cell-lysis and protein purification step which, as compared to conventional methods, can result in a higher yield of heat-stable proteins. Furthermore, some special heat-stable proteins, i.e. intrinsically disordered proteins (which include the proteins involved in important neurodegenerative diseases), need heat-treatment step, in some cases, as the only way for their successful purification and study. Hence, this paper provides a first-ever comprehensive review of all major aspects of heat-stable proteins, i.e., their structure, evolution, classification, significance, and heat-treatment mediated purification.

We investigated whether a functional insertion/deletion (I/D) polymorphism of angiotensin-converting enzyme (ACE) influenced antipsychotic treatment. At baseline, and after 8 weeks of treatment with various antipsychotic medications, we assessed patients’ Positive and Negative Syndrome Scale (PANSS) scores, PANSS factors, and metabolic syndrome-related parameters (fasting plasma lipid and glucose levels, and body mass index). A total of 186 antipsychotic-naïve first-episode psychosis patients or nonadherent chronic psychosis individuals (99 males and 87 females) were genotyped by polymerase chain reaction analysis. The ACE-I/D polymorphism was significantly associated with changes in PANSS psychopathology only (p < 0.05). Compared to ACE-II homozygous males, ACE-DD homozygous and ACE-ID heterozygous males manifested significantly greater decreases in PANSS positive score, PANSS excitement factor, and PANSS cognitive factor. ACE-DD homozygous females manifested higher decreases in PANSS depression factor compared to ACE-II homozygous and ACE-ID heterozygous females. The polymorphism’s effect size was estimated as moderate to strong, while its contribution to the PANSS psychopathology ranged from ~5.4–8.7%, with the lowest contribution observed for PANSS positive score changes and the highest for PANSS depressive factor changes. Our results indicated that ACE-I/D polymorphism had a statistically significant but weak gender-specific impact on psychopathology data and showed no association between ACE-I/D polymorphism and metabolic syndrome-related parameters.

Introduction: Uganda has got the highest prevalence rate of malaria among the risk groups compared to other parts of the world. In addition, Uganda bears a particularly large burden from the disease which is limited by a lack of reliable data, but it is clear that the prevalence of malaria infection, incidence of disease, and mortality among pregnant women all remain very high. According to the Iganga DHIS2 Jan-May report, a higher number of pregnant women received Intermittent Preventive Treatment one (IPT1) and the numbers dropped for IPT2 and IPT3. The district is also referral point of the greater Busoga region and has got several challenges towards malaria control. The study aimed at assessing the uptake of Intermittent Preventive Treatment and the prevalence of malaria among pregnant women in Iganga district so as to generate evidence for scaling up appropriate interventions for IPT uptake among pregnant women. Methods: The research was a retrospective study using secondary data to assess the uptake of IPT and prevalence of malaria for financial year 2019/2020 in nine Public Health Centre IIIs and one Public Health Centre IV. In this study IPT was defined as the administration of a curative dose of an effective antimalarial drug to all pregnant women without testing for presence of malaria parasite and at least three doses as recommended. Secondary data from HMIS was obtained and analyzed to assess the uptake of IPT services and the prevalence of malaria among pregnant women was determined using proportions. Results: The study found that of 6,672 women who received the first dose of IPT-SP, 1671 (25%) of the women received less than 2 doses of IPT and 46% of pregnant women received more than 2 doses of IPT. The study showed that a total of 3,435 pregnant women tested positive for malaria which brings the prevalence to 50%, and being highest among pregnant women aged 20-24 years at 50%. Conclusions: The study showed that the uptake of IPT was relatively low among lower age groups with a relatively high prevalence of malaria among the same age group. This calls for all stakeholders (DHO, MOH, Iganga District, NGOs e.t.c) urgent attention thus to ensure mass sensitization about malaria and IPT importance with IEC and ITN distribution, early diagnosis and treatment, giving incentives to ANC attending mothers, control of the vector.

Multi-modal Motion-assisted Memory Desensitization and Reprocessing Therapy (3MDR), an interactive, virtual-reality assisted, exposure-based intervention for PTSD, has shown promising results for treatment-resistant Posttraumatic Stress Disorder (TR-PTSD) among military members (MMs) and Veterans in Randomized Controlled Trials. Previous research has suggested that emotional regulation (ER) and emotional dysregulation (ED) may be factors which are correlated with symptom severity and maintenance of TR-PTSD. This embedded mixed-methods pilot study (n=9) sought to explore the impact of 3MDR on ER and ED of MMs and Veterans. Difficulties in Emotional Regulation Scale (DERS-18) data was collected at baseline, prior to each session, and at 1 week, 1 month and 3 months post-intervention and analyzed using a Wilcoxon signed-ranks test. Qualitative data collected from sessions, debriefs, and follow-up interviews were transcribed and descriptively analyzed. Results demonstrated statistically significant decreases in DERS-18 scores from pre-intervention to post-intervention at each timepoint. Qualitatively, participants perceived improvements in ER within specified DERS-18 domains. We describe how 3MDR’s unique and novel approach may address ED through cognitive-motor stimulation, narration, divergent thinking, reappraisal of aversive stimuli, dual-task processing, and reconsolidation of traumatic memories. Further investigation is underway to better understand the underlying neurobiological mechanisms by which 3MDR addresses ER and PTSD.

Onion skin waste (OSW), the primary non-edible byproduct from onion processing, offers a renewable source of bioactive compounds. This study aims to valorize OSW through subcritical water extraction (SWE), aligning with circular economy and biorefinery principles. SWE was carried out at 145 °C, 50 bar and 50 min in a discontinuous reactor, producing a phenolic-rich extract (32 ± 3 mg/g), dominated by protocatechuic acid (20 ± 3 mg/g), quercetin-4´-O-glucoside (7.5 ± 0.2 mg/g), and quercetin (3.2 ± 0.6 mg/g). Additionally, it contains sugars (207 ± 20 mg sucrose-Eq/g), proteins (22.8 ± 1.6 mg BSA-Eq/g) and free amino acids (20.4 ± 1.2 mg arginine-Eq/g). Its phenolic richness determines its scavenging activity against ●NO and O2●- radicals, and its α-glucosidase and aldose-reductase inhibition without affecting α-amylase. Notably, the extract demonstrates significant α-glucosidase inhibition (IC50 = 76 ± 4 µg/mL), surpassing acarbose (IC50 = 129.5 ± 1.0 µg/mL), in both pure enzyme and cell culture tests without showing cytotoxicity on AGS, HepG2 and Caco-2 human cell lines. The extract’s bioactivity and nutritional content make it suitable for developing antioxidant and antidiabetic nutraceutical/food components, highlighting the SWE potential for OSW valorization without using organic solvents.

Red mud (RM), a bauxite residue, contains hazardous radioactive wastes and alkaline material and poses severe surface water and groundwater contamination risks, necessitating recycling. Pretreated RM can be used to make adsorbents for water treatment. However, its performance is affected by many factors, resulting in a nonlinear correlation and coupling relationship. This study aimed to identify the best formula for an RM adsorbent using a mathematical model that examines the relationship between 11 formulation types (e.g., pore-assisting agent, component modifier, and external binder) and nine properties (e.g., specific surface area, wetting angle, and Zeta potential, among others). This model was built using a back-propagation neural networks(BP) based on single-factor experimental data and orthogonal test data. The model trained and predicted the established network structure to obtain the optimal adsorbent formula. The RM particle adsorbents had a pH of 10.16, specific surface area(BET) of 48.92 m2·g−1, pore volume of 2.10 cm3·g−1, compressive strength(ST)) of 1.12 KPa, and 24-h immersion pulverization rate(η_m) of 3.72%. In the removal of total phosphorus in flotation tailings backwater, it exhibited a good adsorption capacity (Q)and total phosphorous removal rate(η) of 48.63 mg·g−1 and 95.13%, respectively.

This article discusses the fabrication of pullulan/polyvinyl alcohol (PVA) and PVA blends as carrier polymers for drug delivery. This study utilized coaxial electrospinning to encapsulate doxorubicin (DOX), a common anticancer drug, within nanofibers, which helped mitigate the adverse effects of DOX on normal cells. The study also demonstrated that the coaxial electrospinning technique using PVA/pullulan cores was effective in inhibiting the attachment and proliferation of HeLa cells, a type of cervical cancer cell. The use of pullulan/PVA and PVA blends as carrier polymers in conjunction with coaxial electrospinning could provide a safe and effective drug delivery system for the treatment of cervical and other solid malignancies. The study concluded that nanofibers showed promising results in inhibiting the growth of HeLa cells, indicating their potential as safe and effective drug delivery systems for treating cervical cancer and other solid malignant tumors.

Multiple myeloma (MM) is a genetically complex disease that results from a multistep transformation of normal to malignant plasma cells in the bone marrow. However, the molecular mechanisms responsible for the initiation and heterogeneous evolution of MM remain largely unknown. A fundamental step needed to understand the oncogenesis of MM and its response to therapy is the identification of driver mutations. The introduction of gene expression profiling (GEP) in MM was an important step in elucidating the molecular heterogeneity of MM and its clinical relevance. Since some mutations in myeloma occur in non-coding regions, studies based on the analysis of mRNA provide more comprehensive information on the oncogenic pathways and mechanisms relevant to MM biology. In this review, we discuss the role of gene expression profiling in understanding the biology of multiple myeloma together with the clinical manifestation of the disease, as well as its impact on treatment decisions and future directions.

Glioblastoma is the most common and malignant primary brain tumor. Despite a century of research efforts, the survival of patients has not significantly improved. Currently, diagnosis is based on neuroimaging techniques followed by histopathological and molecular analysis of resected or biopsied tissue. A recent paradigm shift in diagnostics ranks the molecular analysis of tissue samples as the new gold standard over classical histopathology, thus correlating better with the biological behavior of glioblastoma and clinical prediction, especially when a tumor lacks the typical hallmarks for glioblastoma. Liquid biopsy aims to detect and quantify tumor-derived content, such as nucleic acids (DNA/RNA), circulating tumor cells (CTC), or extracellular vesicles (EV) in biofluids, mainly blood, cerebrospinal fluid (CSF), or urine. Liquid biopsy has the potential to overcome the limitations of both neuroimaging and tissue-based methods to identify early recurrence and to differentiate tumor progression from pseudoprogression, without the risks of repeated surgical biopsies. This review highlights the origins and time-frame of liquid biopsy in glioblastoma and points to recent developments, limitations and challenges of adding liquid biopsy to support the clinical management of glioblastoma patients.

Background: Micronutrients has roles in strengthening and maintaining immune function, but its supplementation and/or deficiency effects on respiratory tract infections are inconclusive. This review aims to systematically assess the associations between micronutrient supplementation or deficiency, with novel coronavirus incidence and disease severity. Methods: Systematic literature searches conducted in 5 electronic databases identified 751 unique studies, of which 33 studies (5 supplementation studies, 1 supplementation and deficiency study, and 27 deficiency studies) were eventually included in this review. Proportions of incidence and severity outcomes in each group, and adjusted summary statistics with their relevant 95% confidence intervaIs (CI) were extracted. Data from 19 studies were pooled in meta-analysis using the generic inverse variance method. Findings: A total of 360,346 patients across 16 countries, with a mean age between 32 and 87.7 years, were involved across 33 studies. All studies were on COVID-19 infections. In individuals without micronutrient deficiency, there was a significant reduction on odds of COVID-19 incidence (pooled OR: 0.37, 95% CI: 0.18, 0.78), and ICU admissions or severe/critical disease onset (pooled OR: 0.26, 95% CI: 0.08, 0.89). Insignificant protective effects were observed on other outcome measures – mortality, ICU admission, progression to respiratory-related complications, severe/critical disease onset or requiring respiratory support and hospitalization rate. Conclusion: The absence of micronutrient deficiency significantly reduced COVID-19 incidence and clinical deterioration in hospitalized patients. Usage of micronutrients as prophylaxis and complementary supplement in therapeutic management of COVID-19 patients may be a promising and cost-effective approach warranting in-depth investigation.

Oil agents produced from degreasing treatment of synthetic fibers are typical pollutants in printing and dyeing wastewater, which may cause large-scale environmental pollution without proper treatment. How to purify oily dye wastewater with low cost is a key problem at present. In this study, the biochar microspheres with oil removal ability were prepared deriving from waste bamboo chips using hydrothermal method. The structure of biochar microsphere was regulated by the activation and modification processes. The biochar microspheres were characterized and their adsorption behaviors for oily dye wastewater were explored. The results showed that the adsorption efficiency of biochar microspheres for oily dye wastewater (DTY) was improved significantly after the secondary pyrolysis and lauric acid grafting reaction. The maximum COD removal quantity of biochar microspheres for DTY was 889 mg/g with removal rate of 86.06% in 30 min. Besides, the kinetics showed that the chemisorption was the main adsorption manner. The application of biochar microspheres can decrease the costs of oily wastewater treatment and avoid environmental pollution.

Autoimmune hemolytic anemia is a rare condition characterized by destruction of red blood cells with and without involvement of complement. It is associated with significant morbidity and mortality. In warm autoimmune hemolytic anemia less than 50% of patients remain in a long-term remission following initial steroid therapy and subsequent therapies are required. Cold agglutinin disease is a clonal hematologic disorder which requires therapy in majority of patients and responds poorly to steroids and alkylators. Rituximab has a favorable toxicity profile and has demonstrated efficacy in autoimmune hemolytic anemia in first line as well as relapsed setting. Rituximab is the preferred therapy for steroid refractory wAIHA and as part of the first- and second-line treatment of cold agglutinin disease. This article reviews the mechanism of action of the rituximab and current literature its role in management of primary and secondary warm autoimmune hemolytic anemia and cold agglutinin disease.

Pollutants accumulate in aquatic habitats as a result of mining activities. Lemna gibba and Lemna minor were used in this study to examine the accumulation capacities of Mo+, Pb+, and Cu++ in the acid fluids of the copper mining. Duckweed family includes water plants like L. minor and L. gibba. These are tiny, delicate, free-floating aquatic plants. Two reactors were assigned to L. gibba and L. minor, respectively. Throughout the course of eight days, these plants and reactor water were gathered every day. The acid mine water's pH, temperature, and electric conductivity were also tested every day. The L. gibba and L. minor were cleaned, dehydrated, and burned in a drying oven for a whole day at 300 oC. ICP-MS (Inductively Coupled Plasma Mass Spectroscopy) was used to determine the Mo+, Pb+, and Cu++ content of the plant and water samples. The concentrations of Mo, Pb, and Cu in the acid mine fluids of the copper mining were 30±4, 260±12, and 15535±322 μg L−1, respectively.in that order. When it came to extracting Mo, Pb, and Cu from the acidic fluids of the copper mining, L. gibba and L. minor performed well and efficiently compared to control samples; they did so 29 and 177 times for Mo, 30 and 109 times for Pb, and 495 and 1150 times for Cu. Considering all these findings, it has been shown that L. gibba and L. minor have the ability to efficiently remove Mo, Pb and Cu in acid mine fluids and can be good rehabilitation plants for polluted waters.

Background: Scabies is an unfortunately neglected tropical skin disease. Scabies occurs in Australia, however it is drastically more common amongst select socioeconomically disadvantaged groups. Amongst these, Aboriginal and Torres Strait Islander communities are affected particularly severely, likely secondary to rampant overcrowding. Methods: This literature review has comprehensively explored the relevant evidence available since the year 2000. Objectives: The objective of this article is to provide updates on the identification, management, and control of scabies in Aboriginal and Torres Strait Islander communities. The article also aims to reveal issues with these factors that may be contributing to the inflated prevalence of scabies amongst these groups. Conclusions: Diagnosis currently depends upon clinical examination, dermatoscopy, and skin scraping microscopy; all of which are prone to error. In Australia, topical permethrin remains first-line treatment, however resistance is developing. Other management aspects to consider are environmental measures and treating secondary infections. Scabies prevention is far more cost-effective than managing advanced individual cases, typically ensured through mass drug administration of permethrin or ivermectin. Sustained prevention can prove troublesome for some communities. In order to address the status of scabies as a neglected tropical disease, these issues must be managed first.

This article reports on the comparative study of the hot deformation behaviour of virgin (steel A) and rejuvenated heat treatment creep-exhausted (steel B) P91 steels. Hot uniaxial compression tests were conducted on the two steels at the deformation temperature range of 900°C-1050°C and a strain rate range of 0.01-10s-1 to 0.6 strain using Gleeble® 3500 equipment. The results showed that the flow stress largely depends on the deformation conditions. The flow stress for the two steels increased with an increase in strain rate at a given deformation temperature and vice versa. The flow stress-strain curves exhibited a dynamic recovery as the softening mechanism. The material constants determined using Arrhenius constitutive equations were: stress exponent was: steel A (5.76) and steel B (6.67), and the apparent activation energy was: steel A (473.1 kJ mol-1) and steel B (564.5 kJmol-1). From these results, steel A exhibited better workability than steel B. Statistical parameters analyses showed that the flow stress for the two steels had a good correlation between the experimental and predicted data. Pearson’s correlation coefficient (R) was: steel A (0.97) and steel B (0.98). The Average Absolute Relative Error (AARE) values were: 7.62% (steel A) and 6.54% (steel B). The study shows that the Arrhenius equations can effectively describe the flow stress behaviour of P91 steel, and this method is applicable to the industrial metalworking process.

Recent advances and demands in clinical applications drive a large amount of research to hydroxyapatite (HA) composite coatings fabricated by plasma spray. However, lower degree of HA crystallinity related to high temperature exposure in plasma spray usually leads to rapid weakening and disintegration of HA coatings and often promotes inflammatory responses in the surrounding tissue. In this research, graphene nanosheet (GNS) reinforced HA coatings were fabricated using plasma spray and followed by heat and hydrothermal treatment (hereafter referred to as thermal treatment). The addition of GNSs resulted in competing phenomenon to influence HA crystallinity viz. increased portion of the partially melted/unmelted zones and higher cooling rate during splat formation, leading to slight increase in HA crystallinity (~46.0-51.3%) in the as-sprayed coating. XRD and FTIR results showed that thermal treatment was capable of inducing significant transformation of amorphous HA to the crystalline form and removing other foreign non-HA compounds through regaining OH- ion, and therefore HA coatings displayed ~45.5-47.1% improvements in HA crystallinity regardless of addition or not of the GNS nanofillers. Microstructure observations revealed that thermal treatment enabled microcrack propagation due to stresses caused by crystallisation and phase transformations, and the residual partially melted/unmelted zone of the thermally treated GNS/HA coating was significantly decreased in size. More importantly, the added GNSs contributed greatly to the significant increase in surface nanoroughness of the thermally treated HA coatings owing to the fact that much more structural defects along with the GNSs mainly induced by thermal treatment might act as nucleation sites to accelerate HA nanoparticle precipitation, which would be beneficial for the improved adhesion strength of the osteoblast cells on the coating surface.

Globally, gastric cancer is a major cause of cancer mortality, with a 5-year survival rate of 32% for locally advanced and metastatic gastric cancer. This systematic literature review summarized the clinical, safety, and humanistic outcomes associated with systemic regimens given as first line therapy for locally advanced and metastatic gastric cancer. The search included articles published in English in PubMed, Embase, Web of Science, Cochrane Central Register of Controlled Trials, and the American Society of Clinical Oncology meeting library, from inception to April 2022. Phase II and III randomized controlled trials conducted among western populations diagnosed with stage III and IV locally advanced and metastatic gastric cancer were included. Two investigators independently reviewed the studies, conducted data extraction, and assessed risk of bias in accordance with PRISMA guidelines. Twenty-four randomized controlled trials totaling 8,705 patients were included. Median overall survival ranged from 5.0-13.1 months, median progression-free survival ranged from 2.0-7.7 months, and objective response ranged from 13.0-64.1%. Two studies reported higher quality of life outcomes. Grade 3 and 4 adverse events were reported in most studies. Improvement in clinical outcomes can be seen in recently published randomized controlled trials for locally advanced and metastatic gastric cancer.

Acute myeloid leukemia (AML) is a hematological malignancy that predominantly affects the elderly. Prognosis declines with age. For those who cannot tolerate intensive chemotherapy, historically established treatment options have been hypomethylating agents (HMAs), low dose cytarabine (LDAC), and best supportive care (BSC). As the standard of care evolves for those unfit for intensive chemotherapy, there is a need to understand established treatment pathways, clinical outcomes and healthcare resource utilization in Canada. The CURRENT study was a retrospective chart review of AML patients not eligible for intensive chemotherapy who initiated first-line treatment between 1 January 2015 and 31 December 2018. Data were collected from 170 Canadian patients treated at six hematology centers, of whom 118 received systemic therapy and 52 received BSC as first-line treatment. Median overall survival was 8.58 months and varied from 2.96 months for BSC to 13.31 months for HMAs. Over 80% of patients had at least one outpatient visit, and 67% of patients receiving systemic therapy and 71% of those receiving BSC had at least one admission to hospital, during their first line of therapy. A total of 96 (81.4%) patients receiving first line systemic therapy and 39 (75.0%) of those receiving first line BSC had at least one red blood cell or platelet transfusion. These findings highlight the unmet need for novel therapies for patients ineligible for intensive chemotherapy.

Cardiovascular and cerebrovascular disease incidence has risen mainly due to poor control of preventable risk factors and still constitutes a significant financial and health burden worldwide. ChatGPT is an artificial intelligence language-based model developed by OpenAI. Due to the model’s unique cognitive capabilities beyond data processing and the production of high-quality text, there has been a surge of research interest concerning its role in the scientific community and contemporary clinical practice. To fully exploit ChatGPT's potential benefits and reduce its possi-ble misuse, extreme caution must be taken to ensure its implications ethically and equitably. In this article, we explore the language model's possible applications and limitations while empha-sizing its potential value for diagnosing, managing, and prognosis cardiovascular and cerebro-vascular disease.

Background and Objectives: To evaluate the effectiveness and safety of balloon pulmonary angio-plasty in patients with inoperable chronic thromboembolic pulmonary hypertension in Vilnius Pulmonary Hypertension Referral centre and provide comparative analysis with other centres. Materials and Methods. This study included all balloon pulmonary angioplasty procedures per-formed between 2019 and 2024 in a single tertiary centre. Invasive haemodynamic parameters and clinical variables were assessed at baseline, at the end of invasive treatment, and at the con-clusion of follow-up (average 8.6 months) following the last balloon pulmonary angioplasty. Ad-ditionally, respective literature review was performed. Results. Twenty-six patients with inoper-able chronic thromboembolic pulmonary hypertension were enrolled. The mean age of the pa-tients was 61.6 (40-80) years. Each patient underwent an average of 4.2 (1-9) procedures. Fol-low-up data were available for 12 patients. Mean pulmonary arterial pressure decreased by 38.8% (p

Novel effluent treatment solutions for dangerous organic pollutants are crucial worldwide. In recent years, chemical reduction using noble metal-based nanocatalysts and NaBH4, a reducing agent, has become common practice for eliminating organic contaminants from aquatic environments. We suggest a straightforward approach to synthesizing magnetic cellulose nanocrystals (CNC) modified with magnetite (Fe3O4) and silver nanoparticles (Ag NPs) as a catalyst for organic contamination removal. Especially, Ag NPs were decorated on the CNC surface without reducing agents or stabilizers by reducing AgNO3. XRD, FE-SEM, TEM, EDX, VSM, BET, and zeta potential tests characterized the Ag/Fe3O4/CNC nanocomposite. The nanocomposite's catalytic activity was tested by eliminating 4-nitrophenol (4-NP) and organic dyes methylene blue (MB) and methyl orange (MO) in an aqueous solution at 25 oC. The Ag/Fe3O4/CNC nanocomposite reduced 4-NP and decolored these hazardous organic dyes in short time (2 to 5 min) using a tiny amount of catalyst (2.5 mg for 4-NP and 15 mg for MO and MB). The magnetic catalyst was removed and reused three times without losing catalytic activity. This work shows that the Ag/Fe3O4/CNC nanocomposite can chemically reduce harmful pollutants in effluent for environmental applications.

This study aims to determine the optimal configuration (position and operation duration) for wall mounted mechanical mixers based on the comparison of three-dimensional computational fluid dynamics (CFD) modelling results and physical data collected from the treatment plant. A three-dimensional model of anoxic zone 1, 2 and 3 of Northern Wastewater Treatment Plant (WWTP) located at Cairns Regional Council, Cairns, Queensland, Australia was developed and validated. The model was used to simulate the flow pattern of the WWTP and the simulation results are in good agreement with the physical data varying between 0% to 15% in key locations. The anoxic zones were subject to velocities less than the desired 0.3 metres per second however results for suspended solids concentration indicate that good mixing is being achieved. Results for suspended solids concentrations suggest that the anoxic zones are towards the upper limits recommended by literature for specific power dissipation. The duration for operation of mechanical mixers was investigated and identified that the duration could be reduced from 900 seconds down to 150 seconds. Alternative mixer positioning was also investigated and identified positioning which would increase the average flow velocity with decreased duration (150 seconds). The study identified that Council may achieve savings of $24,000 per year through optimisation of the mechanical mixers.

A simple model is developed for membrane fouling, taking into account two main fouling phenomena: cake formation, due to attached solids onto the membrane surface and pores clogging, due to retained compounds inside the pores. The model is coupled with a simple anaerobic digestion model for describing the dynamics of an Anaerobic Membrane BioReactor (AnMBR). In simulations, we investigate its qualitative behavior: it is shown that the model exhibits satisfying properties in terms of flux decrease due to membrane fouling. Comparing simulation and experimental data, the model is shown to predict quite well the dynamics of an AnMBR. The simulated flux best fits the experimental flux with a correlation coefficient r2=0.968 for the calibration data set and r2=0.938 for the validation data set. General discussions are given on possible control strategies to limit fouling and optimize the flux production. We show in simulations that these strategies allow one to increase the mean production flux to 33 L/(h.m2), whereas without control it was 18 L/(h.m2).

Levels of synthetic musk fragrances (SMFs) and various personal care products (PCPs) were measured in the Han River and its tributaries in Seoul, Korea. The most abundant SMF in all river and PCP samples was 4,6,6,7,8,8-hexamethyl-1,3,4,7-tetrahydrocyclopenta[g]isochromene (HHCB), followed by 1-(3,5,5,6,8,8-hexamethyl-6,7-dihydronaphthalen-2-yl)ethanone (AHTN), musk ketone (MK), and 1,1,2,3,3-pentamethyl-2,5,6,7-tetrahydroinden-4-one (DPMI). There was a significant correlation between the SMF concentration in the PCPs and the Han River samples. Moving from upstream to downstream in the Han River, the median SMF concentration was 6.756, 2.945, 0.304, and 0.141 μg/L in the sewage treatment plant (STP) influent, effluent, tributaries, and mainstream, respectively, implying that effective SMF removal was achieved during the sewage treatment process, followed by dilution in the receiving water. Four STPs using advanced biological treatment processes had removal efficiencies of 55.8%, 50.6%, 43.3% for HHCB, AHTN, and MK, respectively. The highest SMF concentrations in the tributaries were observed at locations close to the STPs. Our study confirmed that the main source of SMFs in the receiving water were sewage effluent containing untreated SMFs, which are largely originated from household PCPs, especially hair care products (e.g., shampoo) and perfumes.