The advance of the medical field in the 21st century has influenced the development of many innovations, including in medical education. PBL (problem-based learning) is one of the pedagogical approaches that has been studying and implementing worldwide to attract medical students’ attention with their learning style and learning environment. China is the most significant “receiver” country of foreign students in Asia, and clinical medicine is one of the most chosen majors for undergraduate. In China, PBL has been implementing in some schools, but mostly with the local students and only a few implementations to the international students. International medical students in China faced a variety of challenges during their studies. In this review paper, we give the solution to adapt to the challenges by focusing on the implementation the integrated organ/system curriculum/syllabus with the PBL method to the school system with the support of the school stakeholders and students’ role.

Vertical-channel organic dual-gate/base transistors would be highly interesting since vertical organic transistors are the fastest organic transistors demonstrated today. However, incorporating a dual gate/base structure into an ultra-short channel vertical architecture represents a substantial challenge. Here, we successfully realize a new device concept of vertical organic permeable dual-base transistors (OPDBTs), where either of both base electrodes can be used to change the on-currents and tune the threshold voltages. The optimized devices yield a high on-current density of 1.54 A cm^-2 and a large current gain of 9.2×10⁵, corresponding to a high transmission value of 99.998%. The detailed operation mechanisms are investigated by calibrated TCAD simulations with the Poole-Frenkel mobility model, Gaussian density of states and tunneling model. Finally, high-performance logic circuits, e.g. inverter, NAND/AND computation functions are demonstrated with one single OPDBT operating at supply voltages of < 2.0 V. We believe that OPDBTs offer a compact and technologically simple hardware platform with excellent application potential for vertical-channel organic transistors in complex logic circuits.

Layered two-dimensional (2D) GO films are integrated with silicon-on-insulator (SOI) nanowire waveguides to experimentally demonstrate an enhanced Kerr nonlinearity, observed through self-phase modulation (SPM). The GO films are integrated with SOI nanowires using a large-area, transfer-free, layer-by-layer coating method that yields precise control of the film thickness. The film placement and coating length are controlled by opening windows in the silica cladding of the SOI nanowires. Owing to the strong mode overlap between the SOI nanowires and the highly nonlinear GO films, the Kerr nonlinearity of the hybrid waveguides is significantly enhanced. Detailed SPM measurements using picosecond optical pulses show significant spectral broadening enhancement for SOI nanowires coated with 2.2-mm-long films of 1−3 layers of GO, and 0.4-mm-long films with 5−20 layers of GO. By fitting the experimental results with theory, the dependence of GO’s n₂ on layer number and pulse energy is obtained, showing interesting physical insights and trends of the layered GO films from 2D monolayers to quasi bulk-like behavior. Finally, we show that by coating SOI nanowires with GO films the effective nonlinear parameter of SOI nanowires is increased 16 fold, with the effective nonlinear figure of merit (FOM) increasing by about 20 times to FOM > 5. These results reveal the strong potential of using layered GO films to improve the Kerr nonlinear optical performance of silicon photonic devices.

We report a broadband radio frequency (RF) channelizer with up to 92 channels using a coherent microcomb source. A soliton crystal microcomb, generated by a 49 GHz micro-ring resonator (MRR), is used as a multi-wavelength source. Due to its ultra-low comb spacing, up to 92 wavelengths are available in the C band, yielding a broad operation bandwidth. Another high-Q MRR is employed as a passive optical periodic filter to slice the RF spectrum with a high resolution of 121.4 MHz. We experimentally achieve an instantaneous RF operation bandwidth of 8.08 GHz and verify RF channelization up to 17.55 GHz via thermal tuning. Our approach is a significant step towards the monolithically integrated photonic RF receivers with reduced complexity, size, and unprecedented performance, which is important for wide RF applications ranging from broadband analog signal processing to digital-compatible signal detection.

Integrated information theory (IIT) was initially proposed to describe human consciousness in terms of intrinsic-causal brain network structures. This theory could potentially be used for conceptualising complex living systems. In a previous study, we analysed collective behaviour in {\it Plecoglossus altivelis}. We found that IIT 3.0 exhibits qualitative discontinuity between three and four schools of fish in terms of $\Phi$ values (i.e., group integrity). Other measures, such as mutual information, did not show such characteristics. In this study, we follow up on our previous findings and introduce two new factors. First, we define the global parameter settings to determine a different kind of group integrity. Second, we set several timescales (from $\Delta t =5/120$ s to $\Delta t =120/120$ s). The results showed that we succeeded in classifying fish school according to their group size in terms of the degree of group integrity, despite the small group size. The concrete classification includes the followership for a two-fish school, fission--fusion for a three-fish school, emergence of leadership for a four-fish school, and emergence of Boid-like behaviour for a five-fish school. These minute classifications have never been revealed before. Finally, we discuss one of the longstanding paradoxes in collective behaviour, known as the heap paradox, for which two tentative answers could be provided through our IIT analysis.

Layered two-dimensional (2D) graphene oxide (GO) films are integrated with micro-ring resonators (MRRs) to experimentally demonstrate enhanced nonlinear optics in the form of four-wave mixing (FWM). Both uniformly coated and patterned GO films are integrated on CMOS-compatible doped silica MRRs using a large-area, transfer-free, layer-by-layer GO coating method together with photolithography and lift-off processes, yielding precise control of the film thickness, placement, and coating length. The high Kerr nonlinearity and low loss of the GO films combined with the strong light-matter interaction within the MRRs results in a significant improvement in the FWM efficiency in the hybrid MRRs. Detailed FWM measurements are performed at different pump powers and resonant wavelengths for the uniformly coated MRRs with 1−5 layers of GO as well as the patterned devices with 10−50 layers of GO. The experimental results show good agreement with theory, achieving up to ~7.6-dB enhancement in the FWM conversion efficiency (CE) for an MRR uniformly coated with 1 layer of GO and ~10.3-dB for a patterned device with 50 layers of GO. By fitting the measured CE as a function of pump power for devices with different numbers of GO layers, we also extract the dependence of GO’s third-order nonlinearity on layer number and pump power, revealing interesting physical insights about the evolution of the layered GO films from 2D monolayers to quasi bulk-like behavior. These results confirm the high nonlinear optical performance of integrated photonic resonators incorporated with 2D layered GO films.

Visual-inertial integrated navigation system (VINS) has been extensively studied over the past decades to provide accurate and low-cost positioning solutions for autonomous systems. Satisfactory performance can be obtained in an ideal scenario with sufficient and static environment features. However, there are usually numerous dynamic objects in deep urban areas, and these moving objects can severely distort the feature tracking process which is fatal to the feature-based VINS. The well-known method mitigates the effects of dynamic objects is to detect the vehicles using deep neural networks and remove the features belongs to the surrounding vehicle. However, excessive exclusion of features can severely distort the geometry of feature distribution, leading to limited visual measurements. Instead of directly eliminating the features from dynamic objects, this paper proposes to adopt the visual measurement model based on the quality of feature tracking to improve the performance of VINS. Firstly, a self-tuning covariance estimation approach is proposed to model the uncertainty of each feature measurements by integrating two parts: 1) the geometry of feature distribution (GFD), 2) the quality of feature tracking. Secondly, an adaptive M-estimator is proposed to correct the measurement residual model to further mitigate the impacts of outlier measurements, such as the dynamic features. Different from the conventional M-estimator, the proposed method effectively alleviates the reliance of excessive parameterization of M-estimator. Experiments are conducted in a typical urban area of Hong Kong with numerous dynamic objects, and the results show that the proposed method could effectively mitigate the effects of dynamic objects and improved accuracy of VINS is obtained when compared with the conventional method.

Desalination accounts for 1% of the total global water consumption and is an energy-intensive process, with the majority of operational expenses attributed to energy consumption. Moreover, at present, a significant portion of the power comes from traditional fossil fuel-fired power plants and the greenhouse gas emissions associated with power production along with concentrated brine discharge from the process, pose a severe threat to the environment. Due to the dramatic impact of climate change, there is a major opportunity to develop sustainable desalination processes to combat the issues of brine discharge, greenhouse gas emissions along with a reduction in energy consumption per unit of freshwater produced. Nanotechnology can play a vital role to achieve specific energy consumption reduction as nanofluids application increases the overall heat transfer coefficient enabling the production of more water for the same size desalination plant. Furthermore, concentrated brine discharge harms the marine ecosystems, and hence, this problem must also be solved to support the objective of sustainable desalination. Several studies have been carried out in the past several years in the field of nanotechnology applications for desalination, brine treatment and the role of renewable energy in desalination. This paper aims to review the major advances in this field of nanotechnology for desalination. Furthermore, a hypothesis for developing an integrated solar thermal and nanofluid sustainable desalination system, based on the cyclic economy model is proposed.

This study evaluated the impact of climate change on water resources in a large semi-arid urban watershed located in Niamey Republic of Niger, West Africa. The watershed was modeled using the fully integrated surface-subsurface HydroGeoSpheremodel at a high spatial resolution. Historical (1980-2005) and projected (2020-2050) climate scenario derived from the outputs of three Regional Climate Models (RCM) under the RCP 4.5 scenario were statistically downscaled using the multiscale quantile mapping bias correction method. Results show that the bias correction method is optimum at daily and monthly scales, and increased RCM resolution does not improve the performance of the model. The three RCMs predict increases of up to 1.6% in annual rainfall and of 1.58°C for mean annual temperatures between the historical and projected periods. The durations of the Minimum Environmental Flow (MEF) conditions, required to supply drinking and agriculture water, were found to be sensitive to changes in runoff resulting from climate change. MEF occurrences and durations are likely to be greater for (2020-2030), and then they will be reduced for (2030-2050). All three RCMs consistently project a rise in groundwater table of more than 10 meters in topographically high zones where the groundwater table is deep and an increase of 2 meters in the shallow groundwater table.

Growing popularity of buildings with integrated sub-systems, requires a review of methods to optimize the preheat of ventilation air. An integrated system permits using geothermal heat storage parallel to the direct outdoor air intake with additional treatment in the mechanical room as a part of building automatic control system. Earth Air Heat Exchanger (EAHX) has many advantages but also has many unanswered questions. Some of the drawbacks are: a possible entry of radon gas, high humidity in the shoulder seasons as well as the need for two different air intake sources with a choice that depends on the actual weather conditions. While in winter, the EAHX may be used continuously to ensure thermal comfort, in other seasons, its operation must be automatically controlled. To generate the missing information about the EAHX technology we have examined two nearly identical EAHX systems, one placed in ground next to the building and the other under the basement slab. In another project, we have reinforced the ground storage action by heat exchanger placed on the return pipes of the hydronic heating system. Effectively, the information provided in this paper, shows advantages of merging both these approaches while the EAHX could be placed under the house or near the basement foundation that is using an exterior basement insulation.

Accurate prediction of defects in software components plays a vital role in administrating the quality of the quality and efficiency of the system to be developed. So we have written a systematic literature review in order to evaluate the four main defect prediction techniques. Defect prediction paves way for the testers to find bugs and modify them in order to achieve input to output conformance. In this paper we have discussed the open issues in predicting software defects and have provided with a detailed analyzation of different methods including Machine Learning, Integrated Approach, Cross-Project and Deep Forest algorithm in order to prevent these flaws. However, it is almost impossible to rule which method is better than the other so every technique can be analyzed separately and the best technique according to the problem at hand can be used or can be altered to create hybrid technique suitable for the cause.

Herpesviruses usurp cellular stress responses to avoid immune detection while simultaneously promoting viral replication and spread. The unfolded protein response (UPR) is an evolutionarily conserved stress response that is activated when the protein load in the ER saturates its chaperone folding capacity causing an accrual of misfolded proteins. Through translational and transcriptional reprogramming, the UPR aims to restore protein homeostasis; however, if this fails the cell undergoes apoptosis. It is commonly thought that many enveloped viruses, including herpesviruses, may activate the UPR due to saturation of the ER with nascent glycoproteins and thus these viruses may have evolved mechanisms to evade the potentially negative effects of UPR signaling. Over the past fifteen years there has been considerable effort to provide evidence that different viruses may reprogram the UPR to promote viral replication. Here we provide an overview of the molecular events of UPR activation, signaling and transcriptional outputs, and highlight key findings that demonstrate that the UPR is an important cellular stress response that herpesviruses have hijacked to facilitate persistent infection.

Growing popularity of smart and integrated buildings requires a review of methods to optimize the preheat of ventilation air. An integrated system permits using heat ex-changers located in the mechanical room or in the future even using an exterior wall as a heat exchanger. One may ask the question how does the earth-air heat exchanger (EAHX) technology fitts into this function. EAHX has many advantages but also has many unanswered questions. Some of the drawbacks are: a possible entry of radon gas, high humidity in the shoulder seasons as well as the need for two different air intake sources with a choice that depends on the actual weather conditions. While in winter, the EAHX may be used continuously to ensure thermal comfort, in other seasons, its operation must be automatically controlled. To generate the missing information about the EAHX technology we reviewed literature and examined two nearly identical EAHX systems, placed either in ground next to the building or under the basement slab. Effectively, the information provided in this paper, shows advantages of merging both these approaches while the EAHX shoud be placed under the house or near the basement foundation.

We propose a concept of hybrid nanoelectronic-magnetic device for logic integrated platforms made of magnetic core-shell nanoparticles deposited onto prepatterned Si (111) substrate with basic logic circuitry made of metallic conductive lines. The synthesis of magnetic material and the creation of nanoelectronic prepatterned interdigitated die is reported and its capabilities are demonstrated in terms of magnetotransport properties. The laser pyrolysis method is employed in order to synthesize magnetic core-shell Fe / FeC nanoparticles with sizes between 12 – 15 nm. E-beam lithography has been used in order to design and execute two different layouts of interdigitated die, prepatterned with logic capacity, one with two pads and 50 microns thick conductive metallic lines, another one with 4 pads and parallel 5 microns thick conductive lines separated by 5 microns thick spacer. The as-obtained structures are morphologically characterized by means of optical, scanning and transmission electron microscopies. As-synthesized core-shell nanoparticles have been magnetically characterized inasmuch as the hybrid device obtained by depositing centrifugated and dispersed core-shell nanoparticles from liquid carrier solutions. For the first time, a significant giant magnetoresistive (GMR) effect has been observed and measured for the hybrid architectured device made of Fe / FeC nanosized materials on pre-patterned interdigitated die. A ∆R/R of 8% at 4.2 K has been measured from conductivity-in-plane electron transport measurements. This opens possibilities for the use of such devices as arrays of nanosensors and in spintronic applications.

Wildfires have impacted thousands of acres of forests in Arizona and New Mexico in recent years. The extensive damage has been partially attributed to the current forest condition where many once open stands now consist of dense stands of younger, unhealthy trees and buildups of forest fuels. In Arizona, land managers and community organizations developed the Four Forests Restoration Initiative (4FRI) to attempt to rectify the situation by thinning the forest while protecting wildlife and watershed resources. Integrated resource information and research are particularly important today with society’s increased demands for high quality water, healthy forests, sound fire management, and viable wildlife populations. However, many managers are not familiar with previous integrated watershed research in the Southwest that could provide a strong basis for current management decisions or as a basis for future research. New and modified prescriptions to manage the Southwest’s forest resources are vital to answer the threats of wildfires and insect infestations. Integrated forest resource management is necessary to meet the diverse needs of society and the land. The 4FRI plan raised many questions about the effects of silvicultural prescriptions on tree, wildlife, and water resources. The Beaver Creek, Thomas Creek, and Castle Creek watershed experiments all had goals of evaluating integrated resource management options and of providing managers and scientists with useful management information. Much of the knowledge gained in these programs can provide forest managers with a better, more holistic basis for future integrated management of the Southwest USA’s forests and woodlands. This paper reviews research on three watershed areas in Arizona where integrated resource management was successful.

From single-cell organisms to complex neural networks, all evolved to provide control solutions to generate context and goal-specific actions. Neural circuits performing sensorimotor computation to drive navigation employ inhibitory control as a gating mechanism, as they hierarchically transform (multi)sensory information into motor actions. Here, we focus on this literature to critically discuss the proposition that prominent inhibitory projections form sensorimotor circuits. After reviewing the neural circuits of navigation across various invertebrate species, we argue that with increased neural circuit complexity and the emergence of parallel computations inhibitory circuits acquire new functions. The contribution of inhibitory neurotransmission for navigation goes beyond shaping the communication that drives motor neurons, instead, include encoding of emergent sensorimotor representations. A mechanistic understanding of the neural circuits performing sensorimotor computations in invertebrates will unravel the minimum circuit requirements driving adaptive navigation.

We demonstrate fabrication of single-mode optical waveguides on lithium niobate on insulator (LNOI) by optical patterning combined with chemo-mechanical polishing. The fabricated LNOI waveguides have a nearly symmetric mode profile of a mode field size of ~2.5 µm (full-width at half maximum). We develop a high-precision measurement approach by which the single mode waveguides are characterized to have a propagation loss of ~0.042 dB/cm.

In this paper, a multi-mode waveguide-based optical resonator is proposed for an integrated optical refractive index sensor. Conventional optical resonators have been studied for single-mode waveguide-based resonators to enhance the performance, but mass production is limited owing to the high fabrication costs of nano-scale structures. To overcome this problem, we designed an S-bend resonator based on a micro-scale multi-mode waveguide. In general, multi-mode waveguides cannot be utilized as optical resonators, because of a performance degradation resulting from modal dispersion and an output transmission with multi-peaks. Therefore, we exploited the mode discrimination phenomenon using the bending loss, and the resulting S-bend resonator yielded an output transmission without multi-peaks. This phenomenon is utilized to remove higher-order modes efficiently using the difference in the effective refractive index between the higher-order and fundamental modes. As a result, the resonator achieved a Q-factor and sensitivity of 2.3x10³ and 52 nm/RIU, respectively, using the variational finite-difference time-domain method. These results show that the multi-mode waveguide-based S-bend resonator with a wide line width can be utilized as a refractive index sensor.

We report fabrication of a multifunctional photonic integrated chip on lithium niobate on insulate (LNOI), which is achieved by femtosecond laser assisted chemo-mechanical polish. We demonstrate a high extinction ratio beam splitter, a 1 × 6 optical switch, and a balanced 3 × 3 interferometer on the fabricated chip by reconfiguring the microelectrode array integrated with the multifunctional photonic circuit.

Rapid technological advancements in information communication technologies have enabled water resource data collection at greater spatial and temporal scale. However, this water data is often limited to the purposes of its primary collection, and limits decisions made by stakeholders towards sustainable urban water management. This empirically focused research paper examines how water practitioners involved in strategic planning can capture additional values from integrating different water data. Furthermore, the perception of 22 urban water practitioners across Australia are presented, regarding the importance of and difficulty in using water data for strategic planning, and the necessary steps for achieving integrated water management practices. Interviewees perception revealed gaps in available water resource data (i.e. water quality, ground water, stormwater, and urban water use), and limitations of industry guidelines for operating within existing governance frameworks. Overall, the research highlights the Australian urban water sector’s perception of water data’s crucial role in representing stakeholders interest; however, changes made in water data’s collection are required for an integrated water management approach. Implications for future open water data standard are discussed.

Electric vehicles, being able to reduce pollutant and greenhouse gas emissions and shift the economy away from oil products, can play a major role in the transition towards low-carbon energy systems. However, the related increase in electricity demand inevitably affects the strategic planning of the overall energy system as well as the definition of the optimal power generation mix. With this respect, the impact of electric vehicles may vary significantly depending on the composition of both total primary energy supply and electricity generation. In this study, Italy and Germany are compared to highlight how a similarity in their renewable shares not necessarily leads to a CO₂ emissions reduction. Different energy scenarios are simulated with the help of EnergyPLAN software assuming a progressive increase in renewable energy sources capacity and electric vehicles penetration. Results show that, for the German case, the additional electricity required leads to a reduction in CO₂ emissions only if renewable capacity increases significantly, whereas the Italian energy system benefits from transport electrification even at low renewable capacity. Smart charging strategies are also found to foster renewable integration; however, power curtailments are still significant at high renewable capacity in the absence of large-scale energy storage systems.

Grain production and storage are major components in food security. In the ancient times, food security was achieved through gathering of fruits, grains, herbs, tubers, and roots from the forests by individual households. Advancements in human civilization led to domestication of crops and a need to save food for not only a household, but the nation. This extended need for food security led to establishment of national reservoirs for major produces and this practice varies greatly in different states. Each of the applied food production, handling and storage approaches has got its benefits and challenges. In sub-Saharan Africa, several countries have a public funded budget to subsidize production costs, to buy grains from farmers and to store the produce for a specific period and/or until the next harvests. During the times of famine, the stored grains are later given free to the citizens. If there is no famine, the grain is sold to retailers and/or processors (e.g., millers) who later sell it to the consumers. This approach works well if the produce (mainly grain) is stored under conditions that do not favor growth of molds, as some of these could contaminate the grain with toxic and carcinogenic metabolites called mycotoxins. Conditions that alleviate contamination of grains are required during production, handling and storage. Most of the grain is produced by smallholder farmers under sub-optimal conditions, which make vulnerable to colonization and contamination by toxigenic fungi. Further, the grain is stored in silos at large masses, where it is hard to monitor the conditions at different points of these facilities, and hence it becomes vulnerable to additional contamination. Production and storage of grain under conditions that favor mycotoxins poses major food health and safety risks to humans and livestock who consume the grain. This concept paper focuses on how establishment of local grain production and banking system (LGPBS) could enhance food security and safety in East Africa. The concept of LGPBS provides an extension of advisory and finance support within warehouse receipting system to enhance grain production under optimal conditions. The major practices at the LGPBS, and how each could contribute to food security and safety are discussed. While the concept paper gives more strength on maize production and safety, similar practices could be applied to enhance safety of other grains in the same LGPBS.

Integrated information theory (IIT) proposes a measure of integrated information (Φ) to capture the level of consciousness for a physical system in a given state. Unfortunately, calculating Φ itself is currently only possible for very small model systems, and far from computable for the kinds of systems typically associated with consciousness (brains). Here, we consider several proposed measures and computational approximations, some of which can be applied to larger systems, and test if they correlate well with Φ. While these measures and approximations capture intuitions underlying IIT and some have had success in practical applications, it has not been shown that they actually quantify the type of integrated information specified by the latest version of IIT. In this study, we evaluated these approximations and heuristic measures, based not on practical or clinical considerations, but rather based on how well they estimate the Φ values of model systems. To do this, we simulated networks consisting of 3–6 binary linear threshold nodes randomly connected with excitatory and inhibitory connections. For each system, we then constructed the system’s state transition probability matrix (TPM), as well as its state transition matrix (STM) over time for all possible initial states. From these matrices, we calculated, approximations to Φ, and measures based on state differentiation, state entropy, state uniqueness, and integrated information. All measures were correlated with Φ in a state dependent and state independent manner. Our findings suggest that Φ can be approximated closely in small binary systems by using one or more of the readily available approximations (r > 0.95), but without major reductions in computational demands. Furthermore, Φ correlated strongly with measures of signal complexity (LZ, r_s = 0.722), decoder based integrated information (Φ*, r_s = 0.816), and state differentiation (D1, r_s = 0.827), on the system level (state independent). These measures could allow for efficient estimation of Φ on a group level, or as accurate predictors of low, but not high, Φ systems. While it’s uncertain whether the results extend to larger systems or systems with other dynamics, we stress the importance that measures aimed at being practical alternatives to Φ are at a minimum rigorously tested in an environment where the ground truth can be established.

Integrated information theory (IIT) was initially proposed to describe human consciousness in terms of intrinsic, causal brain-network structures. This theory has the potential to be useful for conceptualising complex living systems. In a previous study, we analysed collective behaviour in Plecoglossus altivelis and found that IIT 3.0 exhibits qualitative discontinuity between three and four fish. Other measures like mutual information did not have such characteristics. In this study, we followed up on our previous findings and examined timescale effects on integrated information of collective behaviour. We found that a long timescale (1 s) causes Boid-like local interactions to dominate over interactions with the whole, but only when the group size is five at a given time scale (i.e. around 0.2 s). Interestingly, the most suitable time scale is roughly equal to fish reaction time. We used these data to propose a new classification for fish schools, with each size group being a unique and autonomous system, despite small group sizes.

Non-linear loads in circuits cause the appearance of harmonic disturbances both in voltage and current. In order to minimize the effects of these disturbances and, therefore, to control over the flow of electricity between the source and the load, they are often used passive or active filters. Nevertheless, determining the type of filter and the characteristics of their elements is not a trivial task. In fact, the development of algorithms for calculating the parameters of filters is still an open question. This paper analyzes the use of genetic algorithms to maximize the power factor compensation in non-sinusoidal circuits using passive filters, while concepts of geometric algebra theory are used to represent the flow of power in the circuits. According to the results obtained in different case studies, it can be concluded that the genetic algorithm obtain high quality solutions that could be generalized to similar problems of any dimension.

Recent developments in optical biosensors based on integrated photonic devices are reviewed with a special emphasis on silicon-on-insulator ring resonator. The review is mainly devoted to the following aspects: (1) Principles of sensing mechanism, (2) sensor design, (3) biofunctionalization procedures for specific molecule detection and (4) measurement set-ups and advances in chip-integration. The inherent challenges of implementing photonics-based biosensors to meet specific requirements of applications in medicine, food analysis, and environmental monitoring are discussed.

Despite multiple classical outcomes arising from the quantum Rayleigh conversions of photons underlying the propagation of optical waves through dielectric media and the ensuing light-matter interactions, this quantum process has been largely ignored. Several of its outcomes are considered in this article from a physical perspective, e.g., inter-quadrature coupling of photons, phase-dependent amplification in optical directional couplers and related polarization rotation, phase-shifting of weak signals in the optically linear regime, location-dependent coupling coefficient for refractive index gratings, etc. A correct identification of these effects will enable useful design and operation of integrated photonic functional devices.

The traditional hands-on nature in science laboratory classes creates a sense of immediacy and a presence of authenticity in such learning experiences. The handling of physical objects in a laboratory class, and the immediate responses provided by these experiments, are certainly real-live observations, yet may be far from instilling an authentic learning experience in students. This paper explores the presence of authenticity in hands-on laboratory classes in introductory science laboratories. With our own laboratory program as a backdrop we introduce four general types of hands-on laboratory experiences and assign degrees of authenticity according the processes and student engagement associated with them. We present a newly developed type of hands-on experiment which takes a somewhat different view of the concept of hands-on in a laboratory class. A proxemics-based study of teacher-student interactions in the hands-on laboratory classes presents us with some insights into the design of the different types of laboratory classes and the pedagogical presumptions we made. A step-by-step guide on how to embed industry engagement in the curriculum and the design of an authentic laboratory program is presented to highlight some minimum requirement for the sustainability of such program and pitfalls to avoid.

Understanding the spatially varying effects of demographic factors on the spatio-temporal variation of intestinal parasites infections is important for public health intervention and monitoring. This paper presents a hierarchical Bayesian spatially varying coefficient model to evaluate the effects demographic factors on intestinal parasites morbidities in Ghana. The modeling relied on morbidity data collected by the District Health Information Management Systems. We developed Poisson and Poisson-gamma spatially varying coefficient Models. We used the demographic factors, unsafe drinking water, unsafe toilet and unsafe liquid waste disposal as model covariates. The models were fitted using the Integrated Nested Laplace Approximations (INLA). The overall risk of intestinal parasites infection was estimated to be 10.9 per 100 people with a wide spatial variation in the district-specific posterior risk estimates. Substantial spatial variation of increasing multiplicative effects of unsafe drinking water, unsafe toilet and unsafe liquid waste disposal occurs on the variation of intestinal parasites risk. The structured residual spatial variation widely dominates the unstructured component, suggesting that the unaccounted-for risk factors are spatially continuous in nature. The study concludes that both the spatial distribution of the posterior risk and the associated exceedance probability maps are essential for monitoring and control of intestinal parasites.

Misuse and poor handling of chemical pesticides in agriculture is hazardous to the health of farmers, consumers and the environment. We studied the pest and disease management practices and the type of pesticides used in four root, tuber and banana (RTB) crops in Burundi and Rwanda through in-depth interviews with a total of 811 smallholder farmers. No chemical pesticides were used in banana in either Rwanda and Burundi, whereas the use of insecticides and fungicides in potato is quite frequent. Nearly all insecticides and about one third of the fungicides used are moderately hazardous. Personal protective equipment is used by less than a half of the interviewed farmers in both countries. Reported cases of death due to self- or accidental poisoning among humans and domestic animals in the previous 12 months were substantial in both countries. Training of farmers and agrochemical retailers in safe use of pesticide and handling, and use of integrated pest management approaches to reduce pest and disease damage is recommended.

The purpose of work is to quantify the changes of the organism functional reserves during the successive phases of the human health Space-Time Continuum (STC) on the basis of postulates of reliability complex systems theory. The study is devoted to the problem of age-related human involution, which is evaluated not from the causal, but from the kinetic point of view. The analysis of 10 most important basic life support systems of human body — cardiovascular (CVS), respiratory (RS), nervous (NS), digestive (DS), endocrine (ES), immune (IS), excretory (EXS), brain (BS), musculo-skeletal (MSS), hematopoietic (HS) was carried out. Based on this analysis two levels of ensuring the reliability of organism’s work were revealed: sequential and parallel. The system of logical equations for reduced sequential system is: Ys1 = CVS ∧ RS ∧ BS, where ∧ is the notation for the conjunctions of set elements. The system of logical equations for the reduced parallel system is: Ys2 = NS ∨ DS ∨ ES ∨ IS ∨ HS ∨ EXS ∨ MSS ,where ∨ is the disjunction of the scheme elements. Visualization of human STC changes the concept of the kinetics of age-related changes in the organism and the role of determinants of health as a stable factor accompanying a uniform, smooth transition from the most pronounced functions of the body to their gradual extinction. For human STC is formulated the following regularity kinetics of involutionary processes: after 30 years of age in the human body morphological changes regress in arithmetic progression, and the functions of organs in a geometric one. Assumption of health as a state redundancy of functions is suggested.

This paper introduces an approach that chooses the fault detection by calculating probabilities using probability mass function (pmf) and cumulative distribution function (CDF). This work used a method for multiple stuck-at faults by producing a new test pattern in combinational circuits. We assumed that existence of all multiple faults is only because of one single component that is faulty. A complete test set can be created by all possible single stuck-at faults in a combinational circuit using some combination of gates. The test set generation fault detection method is applied on two different 3-bit input variable and 4-bit input variable circuits. The probability of error occurrence is calculated at both 3-bit and 4-bit input variable circuits. The resulting feature is used to obtain maximum error occurrence probability to detect faults by the logic used that the complexity of the circuit is inversely proportional to the fault occurrence probability. Then again, undetectability is directly proportional to the complexity of the circuit. Therefore, finest feasible circuit should have large input variable components with less complexity to reduce the fault occurrence probability.

Substrate integrated waveguides reduce the losses and increase the quality factor of resonators in communication filters when compared with traditional planar technologies, while maintaining their low cost and low profile characteristics. Empty substrate integrated waveguides go one step further, removing the dielectric of the substrate. One of these transmission lines is the empty substrate integrated coaxial line (ESICL), which adds the advantage of being a two conductor structure. Thus, it propagates a TEM mode, which reduces the dispersion and the bandwith limitation of other one conductor empty substrate integrated waveguides. Continuous profile filters, at the cost of being long structures, are very easy to manufacture and design (usually no optimization is needed), and they are highly insensitive to manufacturing tolerances. In this work a simple continuous profile filter, with a stop band response, is designed for the first time in the novel ESICL technology. The influence of the design parameters on the insertion losses and fractional bandwidth is discussed. A prototype has been successfully manufactured and measured. A sensitivity analysis shows the high tolerance of the proposed stop band filter to manufacturing errors.

We develop a technique for realizing lithium niobate on insulator (LNOI) waveguides of a multi-centimeter-length with a propagation loss as low as 0.027 dB/cm. Our technique relies on patterning a chromium (Cr) thin film coated on the top surface of LNOI into a hard mask with a femtosecond laser followed by the chemo-mechanical polishing for structuring the LNOI into the waveguides. The surface roughness on the waveguides is determined to be 0.452 nm with an atomic force microscope (AFM). The approach is compatible with other surface patterning technologies such as optical and electron beam lithographies or laser direct writing, enabling high-throughput manufacturing of large-scale LNOI-based photonic integrated circuits.

The twospotted spider mite, Tetranychus urticae and the western tarnished plant bug, Lygus hesperus are major arthropod pests of strawberries in California. Other important insect pests include the greenhouse whitefly, Trialeurodes vaporariorum and the western flower thrips, Frankliella occidentalis. Chemical pesticides play a major role in managing these pests, but not without the associated risk of pesticide resistance and environmental safety. Two field studies were conducted in Santa Maria to evaluate the potential of botanical and microbial pesticides in the integrated pest management (IPM) of strawberry. Chemical, botanical, and microbial pesticides were evaluated against T. urticae in a small plot study in 2013 and against L. hesperus and other insect pests in a large plot study in 2015 in commercial strawberry fields. Bug vacuums were also used in the 2015 study. Results demonstrated that non-chemical alternatives can play an important role in strawberry IPM.

Many research work has demonstrated that taken the Combined Cooling Heating and Power system (CCHP) as the core equipment, the integrated energy system (IES) can bring obvious benefit to energy efficiency, CO2 emission reduction and operation economy in urban areas. Compared with isolated IES, integrated energy micro-grid (IEMG) which is formed by connecting multiple regions IES together, through distribution and thermal network, can further improve the reliability, flexibility, cleanliness and economy of regional energy supply. Based on the existing IES model, this paper describes the basic structure of IEMG and built a IEMG planning model. The planning based on the mixed integer linear programming, and economically construction planning scheme are calculated by using known electricity, heating and cooling loads information and the given multiple equipment selection schemes. At last, the model is validated by a case study. The results show that the application of IEMG can effectively improve the economy of regional energy supply.

The article reviews the current status of label-free integrated optical sensors focusing on the evolution over the years of their analytical performance. At first a short introduction to the evanescent wave optics is provided followed by detailed description of the main categories of label-free optical sensors including sensors based on surface plasmon resonance (SPR), grating coupler, photonic crystals, ring resonators and interferometric transducers. After a short reference to SPR techniques, including localized SPR, integrated optical sensors i.e., grating-couplers, interferometers, photonic crystals, microring resonators are reviewed. For each type of sensor, the detection principle is first provided followed by description of the different transducer configurations so far developed and their performance as biosensors. Finally, a short discussion about the current limitations and future perspectives of integrated label-free biosensors optical sensors is provided

Changes in agricultural yields due to climate change will affect land use, agricultural production volume, and food prices as well as macroeconomic indicators, such as GDP which is important as it enables one to compare the climate change impacts across multiple sectors. This study considered five key uncertainty factors and estimated macroeconomic impacts due to crop yield changes using a novel integrated assessment framework. The five factors are 1) land-use change (or yield aggregation method based on spatially-explicit information), 2) the amplitude of the CO2 fertilization effect, 3) the use of different climate models, 4) socioeconomic assumptions and 5) the level of mitigation stringency. We found that their global impacts on the macroeconomic indicator value were 0.02 - 0.06% of GDP in 2100. However, the impacts on the agricultural sector varied greatly by socioeconomic assumption. The relative contributions of these factors to the total uncertainty in the projected macroeconomic indicator value were greater in a pessimistic world scenario characterized by a large population increase and low income (0.6%) than in an optimistic scenario (0.00%).

Abstract: The aim of this study was to compare the influence of corporate board characteristics on the extent of environmental disclosure quantity of listed firms in two leading emerging economies in Africa, South Africa (integrated reporting framework) and Nigeria (traditional reporting framework). Methods: The sample was comprised of 303 firms including environmentally sensitive companies purposively selected for content analysis study in South Africa (213) and Nigeria (90). We used both descriptive, multivariate and regression models to comparatively analyze the differences about corporate board characteristics as determinants of the extent of their environmental disclosure quantity. Results: The results reveal a more significant positive association between board characteristics and environmental disclosure in South Africa and less relevant association in Nigeria. Also, the results support that board independence arrangement may serve as bonding mechanisms in weak reporting environments, suggesting a substitutive relationship between board independence and the regulatory framework. Quiet revealing a board with environmental committee show a higher tendency to be ecologic transparent in both countries. However, in a traditional reporting framework, the environmental committee is not enough; its effect was insignificant and highly significant in the integrated reporting framework. Further revealed is the significant positive effect of industry membership influence on environmental disclosure. In all estimated models of South Africa sample show that 45% of environmentally sensitive industries significantly influence environmental disclosure, while 51% is environmentally polluting industries in Nigeria show less concern on environmental disclosure. Interestingly, Audit firm size (Big4) positively and statistically significantly associated with overall environmental reporting in both countries. The results are consistent with stakeholder theory, agency theory, institutional and legitimacy theory suggesting that a strong board size, independent members of the board with auditing experience, the active environmental committee in conjunction with solid audit reputation may reduce information asymmetry. Our findings will be helpful for policymakers and other regulators who are interested in environmental impact reporting.

With the increasing adoption of building integrated photovoltaics (BIPV), concerns arise about potential glare. While recommended criteria to assess glare exist, it is challenging to apply these in the spatial and temporal domains and communicate the complex data to planning authorities and clients. This paper presents a new computational workflow using annual daylight simulation, material modelling using bi-directional scattering distribution functions (BSDFs) and image-based postprocessing to obtain 3-dimensional renderings of cumulative annual irradiance and glare duration on the built environment. The annual daylight simulation considers relevant sun positions in high temporal resolution (15-minute timesteps) and measured BSDFs to model different PV materials. The postprocessing includes a relative irradiance visualisation comparing the impact of a proposed PV proportional to a reference material. It also includes a new spatio-temporal workflow to assess the glare duration based on recommended thresholds. This workflow is demonstrated with a case study of a proposed PV roof for a church, assessing the glare potential of two different PV materials. The visualisations indicate glare durations well below the thresholds with satinated PVs, and in noncritical zones outside observer positions with standard PVs. Thus the proposed PV roof does not cause any disturbing glare.

This paper compares the finite sample performance of three non-parametric threshold estimators via Monte Carlo method. Our results show that the finite sample performance of the three estimators is not robust to the relative position of the threshold level along the distribution of threshold variable, especially when a structural change occurs at the tail part of the distribution.

Logistics Engineering has transcended over the decades into an approach for competitive benefits in organisational performance and logistics efficiency. Most industries are recognising that significant savings are available to companies that are able to ordinate and improve within their logistics operations. Companies today face great challenges because the successful supply of many products and services needs to the effective integration of logistics activities across a prolongation supply chain and an increasing geographical separation. Moreover, logistics integration approach involves both internal integration for an ordinated, unified process as well as relationships to react flexibly, changeability, and responsibility to customer's demands. In this study, by using of Fuzzy Vikor (F-Vikor), the best combination of RIR was selected and RIR Locating was done. The main aim of this paper is survey and design of the integrated operational logistics network (IOLN) and also, a proposed IOLN to integration of the Iran Khodro Co Supply Network.

Forecasting streamflow accurately is essential to achieve an efficient integrated water resources management strategy and provide consistent support to water decision-makers. We present a simple, low-cost and robust approach for forecasting monthly and yearly streamflow during the hydrological year in course, applicable to headwater catchments. It combines the use of regression analysis techniques, the two-parameter Gamma continuous cumulative probability distribution function and the Monte Carlo method. It is based on a probabilistic comparison of the progression of the current hydrological year with the historic observed series. The methodology has been successfully applied to two headwater reservoirs within the Guadalquivir River Basin in southern Spain. The root-mean-square error and correlation coefficient were used to measure the accuracy of the model and the results showed good levels of reliability. The outputs are the probabilistic monthly and yearly streamflow and 80% confidence interval. Further reductions in prediction errors may be achieved from increasing the number of observed years. These risk-based predictions are of great value, especially, before the intensive irrigation campaign starts (usually in April), when Water Authorities are to take responsible management decisions about the best allocation of the available water volume between the different water users and environmental needs.

This paper focuses on the integrated guidance and autopilot design with control input saturation in the end-game phase of hypersonic flight. Firstly, uncertain nonlinear integrated guidance and autopilot model is developed with third actuator dynamics, where the control surface deflection has magnitude constraint. Secondly, neural network is implemented in extended state observer (ESO) design, which is used to estimate the complex model uncertainty, nonlinearity and state coupling. Thirdly, a command filtered back-stepping controller is designed with hybrid sliding surfaces to improve the terminal performance. In the process, different command filters are implemented to avoid the influences of disturbances and repetitive derivation, meanwhile solve the problem of unknown control direction caused by saturation. The stability of closed-loop system is proved by Lyapunov theory, and the principles abided by the controller parameters are concluded through the proof. Finally, series of 6-DOF numerical simulations are presented to show the feasibility and validity of the proposed controller.

In this letter, it is proposed that cryogenic quantum bits could operate based on the nonlinearity due to the quantum capacitance of two-dimensional Dirac materials, and in particular graphene. The anharmonicity of a typical superconducting quantum bit is calculated and the sensitivity of quantum bit frequency and anharmonicty with respect to temperature are found. Reasonable estimates reveal that a careful fabrication process could reveal the expected properties, thus putting the context of quantum computing hardware into new perspectives.

Flooding is a prevalent natural disaster with both short and long-term social, economic, and infrastructure impacts. Changes in intensity and frequency of precipitation (including rain, snow, and rain on snow) events create challenges for the planning and management of resilient infrastructure and communities. While there is general acknowledgement that new infrastructure design should account for future climate change, no clear methods or actionable information is available to community planners and designers to ensure resilient design considering an uncertain climate future. This research used climate projections to drive high-resolution hydrology and flood models to evaluate social, economic, and infrastructure resilience for the Snohomish Watershed, WA, U.S.A. The proposed model chain has been calibrated and validated. Based on the established model chain, the peaks of precipitation and streamflows were found to shift from spring and summer to earlier winter season. The nonstationarity of peak discharges was discovered with more frequent and severe flood risks projected. The peak discharges were also projected to decrease for a certain period in the near future, which might be due to the reduced rain-on-snow events. This research was expected to provide a clear method for the incorporation of climate science in flood resilience analysis and to also provide actionable information relative to the frequency and intensity of future precipitation events.

The development of an underground gas storage (UGS) project and its subsequent management must ensure technical feasibility, commercial value and long-term efficiency. The UGS industry has borrowed much of its knowledge from other disciplines (primarily oil and gas reservoir engineering), but it has also developed its own technology. This paper provides a methodological approach based on current practices and available methods for designing and safely operating a UGS (including the so-called “delta-pressure” option to enhance UGS performance) and highlights what is special in UGS compared to oil and gas reservoirs.

Quality evidence-based decisions and strategies are critical and valuable tools in strengthening health systems policies, strategic priorities action plans and comprehensive care delivery management. Our finding showed that there is scarcity of local/national and internal effective evidence-based and management strategies for informed decision making based on the disease or health epidemics nature, extend, ecological and geo-location of pandemics and epidemics crises burden and impacts. Evidence-based programs or projects are crucial in evolving pandemics and/or (Ebola, meningitis, Cholera and influenza) epidemics persistent morbidity and mortality/ case fatality reduction or prevention; as well as on poverty and inequity alleviation within the vulnerable population and citizenry over time. This paper assesses implications of evidence-based on health systems surveillance and monitoring systems, preparedness and emergency response gaps and needs in improving care delivery uptake and usefulness, coverage and effectiveness in Africa. Furthermore, the article advocates for quality, access to and uptake of knowledge-based policy-decision making and practice improvements in building efficient and standardized surveillance, preparedness and response approaches. Also, in enriching data sharing and inclusiveness through understanding the links between poverty, poor health and inequited related emerging infectious diseases epidemics in Africa. Leveraging on cumulative lessons learnt experiences and innovations in integrating participatory knowledge-based policies and approaches is paramount in fostering vulnerable population awareness and engagement, skills empowerment collaborative productivity and sustainable healthy solutions and measures. Strengthening new partnerships, alliances, and networks requires collaborative and quality evidence policy decisions, appropriate and reliable monitoring and evaluation systems approaches and strategies in improving local preparedness and emergency response capabilities against future emerging infectious diseases epidemics and fast-tracking poverty alleviation knowledge-based livelihoods and health solutions for impact. Furthermore, integrated, participative partnerships and collaborative responsibilities, cost effective and reliable evidence health financing and budget allocation, and targeted capacity development aiming at reducing and averting the burden of poverty related emerging threats and epidemics preparedness and response programs in African countries.

Integrated Water Resources Management (IWRM) is one of the system thinking approaches emerged in the 1990s. Since then it has been applied in various countries and contexts. However, the implementation of the IWRM is contested. There are paucity of literature and guidelines as to how the concept can be operationalized. In Ethiopia, there is no evidence that IWRM is successfully instituted. Particularly, IWRM has never been implemented in the Awash River Basin. The study generated data from household and institutional surveys, in-depth interviews, focused group discussions, workshops, and secondary sources. Multiple sources of data were triangulated and thematically summarized. We found that pragmatic water resources management through system approach helps to recognize river basin as a bigger system in which the natural and human systems function. This resolves the problem of fragmentations among among various actors, sectors, interest and priorities. That it facilitates the coordination of various subsystems. The operationalization of IWRM as a system to secure water resources require the establishment and/or strengthening of the interactions of various systems, subsystems, and the elements within the entire basin system. Finally, enabling institutional environments should be considered as a medium of realizing IWRM.

There is increasing evidence that the impact of climate change on the productivity of grasslands will at least partly depend on their biodiversity. A high level of biodiversity may confer stability to grassland ecosystems against environmental change, but there are also direct effects of biodiversity on the quantity and quality of grassland productivity. To explain the manifold interactions, and to predict future climatic responses, models may be used. However, models designed for studying the interaction between biodiversity and productivity tend to be structurally different from models for studying the effects of climatic impacts. Here we review the literature on the impacts of climate change on biodiversity and productivity of grasslands. We first discuss the availability of data for model development. Then we analyse strengths and weaknesses of three types of model: ecological, process-based and integrated. We discuss the merits of this model diversity and the scope for merging different model types.

The paper highlights the problems associated with the application of daylight and integral lighting in industrial facilities. In the case study of a multi-storey textile plant, we show how combined lighting (daylight and integral illumination) can be evaluated in production halls labelled F and G. These halls have large areas 54 x 54 metres, and are more than 5 meters high. There is daylight only on side through connected windows in a vertical position. In this paper we want to present case studies of these two production halls in the textile factory located in Kosice (Slovakia). These are halls that are lit through by daylight from two sides through external walls that are opposite or next to each other. The results of the case studies can be applied in similar production halls illuminated by a “bilateral” —a double-side daylight system and natural illumination through windows on two sides in a vertical position. Such a situation is typical of multi-storey buildings in light industry. The proposed approach of daylight factor calculation can also be applied to floor space in other similar buildings.

In this paper, a two-stage stochastic programming modelling is proposed to design a multi-period, multistage, and single-commodity integrated forward/reverse logistics network design problem under uncertainty. The problem involves both strategic and tactical decision levels. The first stage deals with strategic decisions, which are the number, capacity, and location of forward and reverse facilities. At the second stage tactical decisions such as base stock level as an inventory policy is determined. The generic introduced model consists of suppliers, manufactures, and distribution centers in forward logistic and collection centers, remanufactures, redistribution, and disposal centers in reverse logistic. The strength of proposed model is its applicability to various industries. The problem is formulated as a mixed-integer linear programming model and is solved by using Benders’ Decomposition (BD) approach. In order to accelerate the Benders’ decomposition, a number of valid inequalities are added to the master problem. The proposed accelerated BD is evaluated through small-, medium-, and large-sized test problems. Numerical results reveal that proposed solution algorithm increases convergence of lower bound and upper bound of BD and is able to reach an acceptable optimality gap in a convenient CPU time.

This paper proposes a method based on genetic algorithm (GA) for the security-constrained optimal dispatch of integrated natural gas and electricity networks, considering operating scenarios in both energy systems. The mathematical formulation of the optimization problem consists of a multi-objective function which aims to minimize both cost of thermal generation (diesel and natural gas) as well as the production and transportation of natural gas. The joint gas-electricity system is modeled by two separate groups of nonlinear equation, which are solved by the combination of Newton's method with the GA. The applicability of the proposed method is tested in the Belgian gas network integrated with the IEEE 14-bus test system and a 15-node natural gas network integrated with the IEEE 118-bus test system. The results demonstrate that the proposed method provides efficient and secure solutions for different operating scenarios in both energy systems.

Markov chain Monte Carlo sampling propagators, including numerical integrators for stochastic dynamics, are central to the calculation of thermodynamic quantities and determination of structure for molecular systems. Efficiency is paramount, and to a great extent, this is determined by the integrated autocorrelation time (IAcT). This quantity varies depending on the observable that is being estimated. It is suggested that it is the maximum of the IAcT over all observables that is the relevant metric. Reviewed here is a method for estimating this quantity. For reversible propagators (which are those that satisfy detailed balance), the maximum IAcT is determined by the spectral gap in the forward transfer operator, but for irreversible propagators, the maximum IAcT can be far less than or greater than what might be inferred from the spectral gap. This is consistent with recent theoretical results (not to mention past practical experience) suggesting that irreversible propagators generally perform better if not much better than reversible ones. Typical irreversible propagators involve a parameter controlling the mix of ballistic and diffusive movement. To gain insight into the effect of the damping parameter for Langevin dynamics, its optimal value is obtained here for a multidimensional quadratic potential energy function.

We present observations from evaluation of internal environmental quality of industrial halls with priority on daylighting in combination with the integral lighting. The physical parameters related to indoor lighting in large industrial halls in winter and summer periods were analyzed using in situ measurements and computational methods. These are part of a comprehensive research on indoor environmental quality of industrial halls with the aims of saving energy and providing a comfortable environment for the workers while improving the productivity. The results showed that the procedures used for evaluation of residential or office buildings may not be used for industrial buildings. We also observed that the criteria of occupants’ comforts for indoor industrial buildings may differ from those of other kinds of buildings. Based on these results, an adequate attention is required for designing the industrial buildings. For this reason, appropriate evaluation methods and criteria should be created. We found the measured values of daylight factor very close to the skylight component of the total illumination. The skylight component was observed on average 30% that of the measured daylight factor values. Although the daylight is not emphasized when designing the industrial buildings and its contribution is small, but it is very important for the workers psychology and physiology. The workers must feel a connection with the exterior environment; otherwise, their productivity decreases.

In this paper, a novel integrated high precision vacuum microelectronic accelerometer is put forward based on the theory of field emission, the accelerometer consists of sensitive structure and interface ASIC. The sensitive structure has a mass of a cathode cone tips array, a folded beam, an emitter electrode and a feedback electrode. The sensor is fabricated on a double side polished (1 0 0) N-type silicon wafer, the tips array of cathode are shaped by wet etching with HNA (HNO3, HF and CH3COOH) and metalized by TiW/Au thin film. The structure of sensor is released by ICP process finally. The interface ASIC was designed and fabricated based on the P-JFET high voltage bipolar process. The accelerometer is tested through static field rollover test, and the test results show the integrated vacuum microelectronic accelerometer has good performances, which sensitivity is 3.081V/g and non-linearity is 0.84% in the measuring range of −1g~1g.

Clock Network Design (CDN) is a critical step while designing any Integrated-Circuits (ICs). It holds vital importance in the performance of entire circuit. Due to continuous scaling, 3D ICs stacked with TSV are gaining importance, with an objective to continue with the Moore's law. Through-Silicon-Via (TSV) provides the vertical interconnection between two die, which allows the electrical signal to flow through it. 3D ICs has many advantages over conventional 2D planar ICs like reduced power, area, cost, wire-length etc. The proposed work is mainly focused on power reduction and obstacle avoidance for 3D ICs. Various techniques have already been introduced for minimizing clock power within specified clock constraints of the 3D CND network. Proposed 3D Clock Tree Synthesis (CTS) is a combination of various algorithms with an objective to meet reduction in power as well as avoidance of obstacle or blockages while routing the clock signal from one sink to other sink. These blockages like RAM, ROM, PLL etc. are fixed during the placement process. The work is carried out mainly in three steps- first is Generation of 3D Clock tree avoiding the blockages, then Buffering and Embedding and finally validating the results by SPICE simulation. The experimental result shows that our CTS approach results in significant 9% reduction in power as compare to the existing work.

Abstract: High step-up voltage gain nonisolated DC-DC converter have attracted much attention in photovoltaic, fuel cells and other renewable energy system applications. In this paper, by combining input current ripple-free boost cell with coupled-inductor voltage-doubler cell, an input current ripple-free high voltage gain nonisolated converter is proposed. In addition, passive lossless clamp circuit is adopted to recycle the leakage inductor energy and to reduce the voltage spike across the power switch. By utilizing voltage-doubler cell consisting of diode and capacitor, the voltage stress of switch is further reduced and the resonance between the leakage inductor and the stray capacitor of the output diode is eliminated. A low switch-on-resistance low-voltage-rated MOSFET can therefore be employed to reduce the conduction loss and cost. The reverse recovery loss of output diode is reduced, and the efficiency of converter can be improved. Furthermore, the proposed converter can achieve nearly zero input current-ripple and make the design of electromagnetic interference (EMI) filter easy. Steady state analysis and operation mode of the converter is performed. Finally, experimental results are presented to verify the analysis results of the proposed converter.

We introduce optically clear and resilient free-form micro-optical of pure (non-photosensitized) organic-inorganic SZ2080 material made by femtosecond 3D laser lithography (3DLL). This is advantageous for rapid printing of 3D micro-/nanooptics, including their integration directly onto optical fibers. A systematic study on the fabrication peculiarities and quality of resultant structures is performed. Comparison of microlenses’ resiliency to CW and femtosecond pulsed exposure is determined. Experimental results prove that pure SZ2080 is ∼3 fold more resistant to high irradiance as compared with a standard photo-sensitized material and can sustain up to 1.91 GW/cm² intensity. 3DLL is a promising manufacturing approach for high-intensity micro-optics for emerging fields in astro-photonics and atto-second pulse generation. Additionally, pyrolysis is employed to shrink structures up to 40% by removing organic SZ2080 constituents. This opens a promising route towards downscaling photonic lattices and creation of mechanically robust glass-ceramic structures.

In this paper we propose the explicit formulas of Average Run Length (ARL) of Exponentially Weighted Moving Average (EWMA) control chart for Autoregressive Integrated Moving Average: ARIMA (p,d,q) (P, D, Q)_L process with exponential white noise. To check the accuracy, the ARL results were compared with numerical integral equations based on the Gauss-Legendre rule. There was an excellent agreement between the explicit formulas and the numerical solutions. Additionally, we compared the computational time between our explicit formulas for the ARL with the one obtained via Gauss-Legendre numerical scheme. The computational time for the explicit formulas was approximately one second that is much less than the numerical approximations. The explicit analytical formulas for evaluating ARL0 and ARL₁ can produce a set of optimal parameters which depend on the smoothing parameter (λ) and the width of control limit (H), for designing an EWMA chart with a minimum ARL₁.

In graduate programs such as social work, field education is the signature pedagogy of education. As such, student placement with an appropriate field education agency is critical to ensure academic success and career readiness. A variety of Learning Management System (LMS) and Integrated Planning and Advising Service (IPAS) technologies have been developed to fully integrate technology into the educational system and streamline and improve the learning experience for students, educators, and administrators. Few (if any) of the existing solutions have capabilities to match students with field educators on the basis of an individual student’s completed coursework and area of specialization, as well as field educator needs and opportunities. This paper describes our experience developing a custom LMS/IPAS system—the School of Social Work information System (SSWiS)—that was designed specifically for student learning, faculty advising, and academic administration within our social work graduate program. We present the challenges that motivated the design of the SSWiS before describing the architecture and functionality of our solution. We then discuss our preliminary evaluation results. We conclude with a discussion of the benefits and limitations of our system in the context of today’s technical needs in graduate education in social work and other fields.