Catastrophic mass flows originating from the high mountain cryosphere often cause hazard cascades. With increasing human activities in the alpine region and the sensitivity of glaciers, snow and permafrost to climate warming, the cryospheric hazard risks tend to be more active in the Tibetan Plateau(TP). The remoteness and inaccessibility of high mountain regions make the remote sensing technology the most effective approach for monitoring and investigating the cryospheric hazards. Exploring the evolution process and impact of ice avalanches and subsequent hazards are crucial to understand drivers and nature of mass flow process chain in order to prevent and mitigate potential hazard consequences. In this study, the glacier and ice-rock avalanches occurred in Arutso and Sedongpu basins in Tibet were investigated on the basis of Sentinel-2 time-series images and in-situ investigation, the evolution process of these events were reconstructed, and impacts and driving factors were analyzed. The massive Chamoli rock-ice avalanche occurred in February 2021 in the western Himalayas was also reviewed using using same methods. The study shows that Arutso glacier No. 53 (Arutso-53) avalanche completely melted away in July 2018 after two years from occurrence to final disappearance, while Arutso glacier No. 50 (Arutso-50) avalanche completely melted by the end of August 2023 after lasting for seven years. Four large-scale ice-rock avalanche and debris flow events in the Sedongpu basin in 2017 and 2018 not only had significant impacts on the river flow, landscape and geomorphologic shape in the basin, but also caused serious disasters in the basin and downstream. In March 2021, a small-scale ice-rock avalanche and debris flow event occurred again in the Sedongpu basin. The glacier and ice-rock avalanches occurred in Tibet area were mainly induced by climate warming, heavy precipitation and seismic activity, which acting on specific topographic and geomorphic structure of glacier properties in the high mountain regions. Catastrophic hazard events originating from the high-elevation glacier and ice-rock collapses in the mountain cryosphere and subsequent hazard cascades in the TP and Himalayas highlight the importance of mountain hazard monitoring, early warning systems and sustainable mountain development.

This paper presents ensemble learning of multi-source satellite sensors dataset to obtain better predictive performance of the forest biomass. Spectral, spectral-indices, and spectral-textural features were generated from two optical satellite sensors, Landsat 8 Operational Land Imager (OLI) and Sentinel-2 Multispectral Instrument (MSI). In addition, two radar satellite sensors, Sentinel-1 C-band Synthetic Aperture Radar (CSAR), and Advanced Land Observing Satellite (ALOS-2) Phased Array type L-band Synthetic Aperture Radar (PALSAR-2) were utilized to generate backscattering and backscattering-textural features. The plot-wise above ground biomass data available from five forests in New England region were utilized. Ensemble learning of multi-source satellite sensors dataset was carried out by employing four machine learning regressors namely, Support Vector Machines (SVM), Random Forests (RF), Gradient Boosting (GB), and Multilayer Perceptron (MLP). A five-fold cross-validation method was used to evaluate predictive performance of the multi-source satellite sensors. The integration of multi-source satellite features, comprising of spectral, spectral-indices, backscattering, spectral-textural, and backscattering-textural information, through ensemble learning and cross-validation approach implemented in the research showed promising results (R² = 0.81, RMSE = 46.2 Mg/ha) for the estimation of plots-level forest biomass in New England region.

This work estimates yield losses due to drought events in mountain grasslands in north-eastern Italy, laying the groundwork for index-based insurance. Given the high correlation between Leaf Area Index (LAI) and grassland yield, we exploit LAI as a proxy for yield. We estimate LAI by the Sentinel-2 biophysical processor and we compare different gap-filling methods, including time-series interpolation and fusion with Sentinel-1 SAR data. We derive a Forage Production Index (FPI) as the growing season cumulate of the daily product between LAI and a meteorological water stress coefficient. Finally, we calculate the drought index as the anomaly of FPI. The validation of Sentinel-2 LAI with ground measurements showed RMSE of 0.92 [m2 m-2] and R2 of 0.81, on average over all the measurement sites. The comparison between FPI and yield showed R2 of 0.56 at the pixel scale and R2 of 0.74 at the parcel scale. The developed prototype FPI index was used at the end of the growing season of the year 2022 for calculating the payments of an experimental insurance scheme that was proposed to a group of farmers in Trentino-South Tyrol.

The Mont-Saint-Michel is known worldwide for its unique combination of the natural site and the Medieval abbey at the top of the rocky islet. But the Mont is also located within an estuarine complex, which is considerably silting up. For two decades, large-scale works were planned to prevent the Mont from being surrounded by the expanding salt meadows. The construction of a new dam over the Couesnon River, the digging of two new channels, and the destruction of the causeway were the main operations carried out between 2007 and 2015. The remote sensing approach is fully suitable for evaluating the real impact of the engineering project in both time and space, particularly the expected large-scale hydrosedimentary effects, for reestablishing the maritime landscape around the Mont. Sentinel-2 satellite data have been used for the period from 2015 to 2023. Aster data were used for the previous period covering 2000 to 2017. Aerial photographs and an ALOS scene have been also used. The remote sensing approach is based on time-series images. It allows identifying local or regional consequences and temporary or permanent effects. The migration of the different channels (especially for the new west and east Couesnon river courses) and the erosion-progradation balance of the vegetation through space and time are the main features to study. Between 2007 and 2023, the erosion of the salt meadows is significant to the south-west of the Mont (− 150 ha) but more limited to the south-east (− 65 ha). The erosion effect is limited to the immediate environment because the vegetation fringe of the uppermost tidal flat along the main dike is slightly increasing (+ 35 ha) to the west and to the east (+ 40 ha). During the same period, the sedimentation considerably increased to the north-east of the Bay, between the Bec d’Andaine, the Grouin du Sud and Tombelaine islet, which seems now facing the same silting-up problem. At this stage, the remote-sensing survey indicates mixed results for the engineering project.

The Sentinel-2 satellite mission offers high resolution multispectral time series image data, enabling the production of detailed land cover maps globally. At this scale, the trade-off between processing time and result quality is a central design decision. Currently, this machine learning task is usually performed using pixelwise classification methods. The radical shift of the computer vision field away from hand engineered image features and towards more automation by representation learning comes with many promises, including higher quality results and less engineering effort. In this paper we assess fully convolutional neural networks architectures as replacements for a Random Forest classifier in an operational context for the production of high resolution land cover maps with Sentinel-2 time series at the country scale. Our contributions include a framework for working with Sentinel-2 L2A time series image data, an adaptation of the U-Net model for dealing with sparse annotation data while maintaining high resolution output, and an analysis of those results in the context of operational production of land cover maps.

The abstract should be an objective representation of the article and it must not contain results that are not presented and substantiated in the main text and should not exaggerate the main conclusions.

Multispectral and 3D LiDAR remote sensing data sources are valuable tools for characterizing the 3D vegetation structure and thus understanding the relationship between forest structure, biodiversity and microclimate. This study focuses on mapping riparian forest species in the canopy strata using a fusion of Airborne LiDAR data and multispectral multi-sources and multi-resolution satellite imagery; Sentinel-2 and Pleiades at tree level. The idea is to assess the contribution of each data source in the tree species classification at the considered level. The data fusion was processed at feature-level and decision level. At feature level, LiDAR 2D attributes were derived and combined with vegetation indices. At decision level, LiDAR data was used for 3D tree crown delimitation providing unique trees or groups of trees that are used as a support for the species classification. Data augmentation techniques were used to improve the training process. Best results were obtained by the fusion of Sentinel-2 time series and LiDAR data with a Kappa of 0.66 thanks to red-edge based indices that better discriminate vegetation species and the temporal resolution of Sentinel-2 images that allows monitoring the phenological stages helping to discriminate the species.

The scale and accessibility of passive global surveillance have rapidly increased over time. This provides an opportunity to calibrate the performance of models, algorithms, and reflectance ratios between remote sensing devices. Here we test the sensitivity and specificity of Eucalypt chlorophyll-a reflectance ratio (ECARR) and Eucalypt chlorophyll-b reflectance ratio (ECBRR) to remotely identify eucalypt vegetation in Queensland, Australia. We compare reflectance ratio values from Sentinel-2 and Planet imagery across four sites of known vegetation composition. All imagery was transformed to reflectance values and Planet imagery was additionally scaled to harmonize across Planet Scenes. ECARR can identify eucalypt vegetation remotely with high sensitivity, but shows low specificity and is impacted by the density of the vegetation. ECBRR reflectance ratios show similar sensitivity and specificity when identifying eucalypt vegetation but with values an order of magnitude smaller than ECARR. We find that ECARR was better at identifying eucalypt vegetation in the Sentinel-2 imagery than Planet imagery. ECARR can serve as a general chlorophyll indicator but is not a specific index to identify Eucalyptus vegetation with certainty.

Forest damage has become more frequent in Europe in the last decades, and remote sensing offers a powerful tool for monitoring them rapidly and cost-effectively. A novel approach was developed to utilize high-resolution ESA Sentinel-2 satellite imagery and Google Earth Engine cloud computing. The processing, analysing, and visualization of vegetation and water index (NDVI, NDVIch, Z NDVI, EVI, NDWI) maps and charts derived from satellite images took place in the cloud to ensure the detection of forest disturbances in the Hungarian study site for the period 2017-2020. The index maps were classified to reveal forest disturbances, and the cloud-based method successfully showed drought and frost damage in the oak-dominated Nagyerdő forest of Debrecen. Differences in the reaction to damage between tree species were visible in the index values, therefore a Random Forest Machine Learning classifier was applied to show the spatial distribution of dominant species. Accuracy assessment was accomplished with confusion matrices that compared classified index maps to field-surveyed data, demonstrating 71% Total Accuracy for forest damage and 76% for tree species. Based on the results of this study and the resilience of Google Earth Engine, the presented method has the potential to be extended to monitor the entire Hungary.

The Hindu Kush Himalaya (HKH) is one of the most flood-prone regions in the world, yet heavy cloud cover and limited in-situ observations have hampered efforts to monitor the impact of heavy rainfall, flooding, and inundation during severe weather events. This paper introduces HydroSAR, a Sentinel-1 SAR-based hazard monitoring service that was co-developed with in-region partners to provide year-round, low-latency weather-hazards information across the HKH. The paper describes the end-user focused concept and overall design of the HydroSAR service. It introduces the main processing algorithms behind HydroSAR’s broad product portfolio, which includes qualitative visual layers as well as quantitative products measuring surface water extent and water depth. We summarize the cloud-based implementation of the developed service, which is providing capability to scale automatically with event size. A performance assessment of our quantitative algorithms is described, demonstrating capabilities to map flood extent and water depth at an accuracy of >90% and

Lodging is a common problem in maize production that seriously impacts yield, quality, and the capacity for mechanical harvesting. Evaluation of site-specific lodging risks requires establishment of a method for multi-year monitoring. In this study, spectral images collected by the Sentinel-2 satellite were processed to obtain three types of data: gray-level co-occurrence matrix texture (GLCM), vegetation indices (VIs), and spectral reflectance (SR). Lodging classification models were then established with Random Forest (RF) using each of the three data types separately (the GLCM, VI, and SR models) and in combination (SR+VI model, SR+GLCM model, VI+GLCM mod-el, and SR+VI+GLCM model). By gradually removing features with low importance scores from the SR+VI+GLCM model and analyzing the changes in the overall accuracy (OA), the optimal set of predictive variables was identified and used to construct the optimal model. A model built us-ing data from a single timepoint in 2021 was tested on data collected at a similar timepoint in 2019 and vice versa to assess interannual model generalizability. The results of this study demon-strate that for monitoring maize lodging, models constructed with a single feature type, the GLCM model had significantly lower accuracy compared to the VI and SR models. During certain growth stages, the model constructed with combined features had significantly higher accuracy in monitoring maize lodging compared to models constructed with a single feature. During the pro-cess of selecting the optimal predictive variables, it was found that the accuracy of the model did not increase as the number of predictive variables increased. The results show that the positive and negative validation models had an accuracy of 96.55% and 95.18%, with kappa values of 0.93 and 0.83, respectively. This indicates that the model has strong generality for the same repro-ductive stage between years. This study provides a detailed method for large-scale maize lodging monitoring, allowing for identification of optimal planting practices to reduce the probability of lodging and ultimately improving regional maize yield and quality.

The emergence of cloud computing, big data analytics, and machine learning has catalysed the use of remote sensing technologies to enable more timely land management of sustainability indicators such as ground cover and grassland biomass, given the uncertainty of future climate and drought conditions. Here, we examine the potential of “regenerative agriculture”, as an adaptive grazing management strategy to minimise bare ground exposure while maximising pasture biomass productivity. High-intensity sheep grazing treatments were conducted in small fields (less than 1 hectare) for short durations (typically less than 1 day). Paddocks were subsequently spelled to allow pasture biomass recovery (treatments comprising 3, 6, 9, 12, and 15 months) with each compared with control treatments with lighter stocking rates for longer periods (2,000 DSE). Pastures were composed of wallaby grass (Austrodanthonia species), kangaroo grass (Themeda triandra), Phalaris (Phalaris aquatica, and cocksfoot (Dactylis glomerata) were destructively sampled to estimate total standing dry matter (TSDM), standing green biomass, standing dry biomass and trampled biomass. We then invoked a machine learning model using Sentinel-2 imagery to quantify TSDM, standing green biomass and standing dry biomass. Faced with La Nina conditions, regenerative grazing did not significantly impact pasture productivity, with all treatments showing similar TSDM and green biomass. However, regenerative treatments significantly impacted litter fall and trampled material, with the high intensity grazing treatments causing more dry matter trampling, increasing litter, enhancing decomposition rates and surface organic matter. Pasture digestibility was greatest for treatments with minimal spelling (3 months), whereas both standing senescent and trampled material were significantly greater for the treatment with 15-month spell periods. Estimates of TSDM using machine learning with Sentinel-2 imagery underestimated TSDM in treatment plots but explained spatiotemporal variability associated within and across treatments. The root mean square error between the measured and modelled TSDM was 903 kg DM/ha, which was less than the variability measured in the field. We conclude that regenerative grazing with short recovery periods (3-6 months) are most conducive to increasing pasture production under high rainfall conditions, and we speculate that high intensity grazing is likely to positively impact on soil organic carbon through increased litterfall and trampling. Our study paves the way forward for using machine learning with satellite imagery to quantify pasture biomass at small scales, enabling management of pastures from afar.

Early and accurate mapping of winter canola planting areas provides critical support for sustainable cropland management. Although some methods have been proposed to map the winter canola at the flowering or later stage, mapping winter canola planting areas at the early stage is still challenging, due to the insufficient understanding of the multi-source remote sensing features sensitive for winter canola mapping. This study proposed an early-stage winter canola area mapping method by using the combination of optical and synthetic aperture radar (SAR) data. We analyzed the spectral features, backscatter coefficients, and textural features of winter canola based on Sentinel-2 and Sentinel-1 images. Random forest (RF) and Support Vector Machine (SVM) classification models were built to map winter canola based on early-stage images and field samples in 2017 and then apply the best model to corresponding satellite data in 2018-2022. Results showed that: (1) The red edge and near-infrared-related spectral features were most important for the mapping of early-stage winter canola, followed by VV, DVI and GOSAVI, which also showed greater differences than the other features; (2) Based on Sentinel-1 and Sentinel-2 data, winter canola could be earliest mapped around 130 days prior to ripening (i.e., early overwinter stage) with the F-score over 0.85 and the OA over 81%; (3) Adding Sentinel-1 could improve the OA by about 2%-4% and the F-score by about 1% -2% in winter canola mapping. (4) The F-score of winter canola mapping based on the classifier transfer approach in 2018-2022 varied between 0.75 and 0.97, and the OA ranged from 79% to 86%. This study demonstrates the potential of early-stage winter canola mapping using the combination of Sentinel-2 and Sentinel-1 images, which could provide valuable and timely information for stakeholders and decision makers.

Copernicus is Europe's space-based Earth monitoring asset, which consists of a complex set of systems that collect data from different sources: remote sensing satellites (RS) and in-situ sensors such as ground stations, airborne and marine sensors. This study was originally prepared for the needs of the Czech agricultural community, where we provided an in-depth analysis of articles related to Earth observation in precision agriculture. At a later stage, we extended this study by comparing the recommendations of the European EO4Agri project and scientific articles published in MDPI. We had two important objectives, one was to validate the results of the EO4Agri project and the other was to look for gaps in current research and community needs. To recognize the importance of using Sentinel 1 data, we also added a specific analysis of methods for data fusion of Sentinel 1 and Sentinel 2 data.

Classification and mapping of plant communities is an essential step for conservation and management of ecosystems and biodiversity. We adopt the Genus-Physiognomy-Ecosystem (GPE) system developed in previous study for satellite-based classification of plant communities. This paper assesses the potential of multi-spectral and multi-temporal images collected by Sentinel-2 satellites. This research was conducted in five representative study sites in a temperate region. It consists of 44 types of plant communities including a few land cover types as well. The plant community types were enumerated in the study sites and ground truth data were prepared with reference to extant vegetation surveys, visual interpretation of high-resolution images, and onsite field observations. We acquired all Sentinel-2 Level-1C product images available for the study sites between 2017-2019 and generated monthly median composite images consisting of ten spectral and twelve spectral-indices. Gradient Boosting Decision Trees (GBDT) classifier was employed as an efficient and distributed gradient boosting technique for the supervised classification of big datasets involved in the research. The cross-validation accuracy in terms of kappa coefficient varied from 87% in Oze site with 41 land cover and plant community types to 95% in Hakkoda site with 19 land cover and plant community types; with average performance of 91% across all sites. In addition, the resulting maps demonstrated a clear distribution of plant community types involved in all sites, highlighting the potential of Sentinel-2 multi-spectral and multi-temporal images with GPE classification system for operational and broad-scale mapping of land cover and plant communities.

Forest degradation is known to be widespread in the tropics, but is currently very poorly mapped, in part because there is little quantitative data on which satellite sensor characteristics and analysis methods are best at detecting it. To improve this, we used data from the Tropical Forest Degradation Experiment (FODEX) plots in the southern Peruvian Amazon, where different numbers of trees had been removed from four 1 ha forest plots, carefully inventoried by hand and Terrestrial Laser Scanning before and after the logging to give a range of biomass change (ΔAGB) values. We conducted a comparative study of six multispectral optical satellite sensors (WorldView-3, SkySat, SPOT-7, PlanetScope, Sentinel-2 and Landsat 8) at 0.3 – 30 m spatial resolution, to find the best combination of sensor and remote sensing indicator for change detection. Spectral reflectance, the Normalized Difference Vegetation Index (NDVI) and texture parameters were extracted after radiometric calibration and image preprocessing. The strength of the relationships between the change in these values and field-measured ΔAGB (computed in % ha−1) was analysed. The results demonstrate that: (a) texture measures correlates more with ΔAGB than simple spectral parameters; (b) the strongest correlations are achieved for those sensors with spatial resolutions in the intermediate range (1.5 - 10 m), with finer or coarser resolutions producing worse results, and (c) when texture is computed using a moving square window ranging between 9 - 14 m in length. Maps predicting ΔAGB showed very promising results using a NIR-derived texture parameter for 3 m resolution PlanetScope (R2 = 0.97 and RMSE = 1.80 % ha−1), followed by 1.5 m SPOT-7 (R2 = 0.74 and RMSE = 5.25 % ha−1) and 10 m Sentinel-2 (R2 = 0.71 and RMSE = 5.55 % ha−1). Texture models derived from 0.3 m WorldView-3 improved with increasing window size, with highest R2 of 0.62 and RMSE = 6.35 % ha−1 for a window of 14 m in length. The degradation in our field plots is invisible to the 30 m resolution Landsat data. Our findings imply that, at least for lowland Peru, low-medium intensity disturbance can be detected best in optical wavelengths using a texture measure derived from 3 m PlanetScope data. That such data are being collected daily, and currently released free as monthly mosaics over tropical forests as part of the Norway’s International Climate and Forest Initiative (NICFI), is excellent news for monitoring such degradation.

This research introduces Genus-Physiognomy-Ecosystem (GPE) mapping at a prefecture level through machine learning of multi-spectral and multi-temporal satellite images at 10m spatial resolution, and later integration of prefecture wise maps into country scale for dealing with 88 GPE types to be classified from a large size of training data involved in the research effectively. This research was made possible by harnessing entire archives of Level-2A product, Bottom of Atmosphere reflectance images collected by MultiSpectral Instruments onboard a constellation of two polar-orbiting Sentinel-2 mission satellites. The satellite images were pre-processed for cloud masking and monthly median composite images consisting of 10 multi-spectral bands and 7 spectral indexes were generated. The ground truth labels were extracted from extant vegetation survey maps by implementing systematic stratified sampling approach and noisy labels were dropped out for preparing a reliable ground truth database. Graphics Processing Unit (GPU) implementation of Gradient Boosting Decision Trees (GBDT) classifier was employed for classification of 88 GPE types from 204 satellite features. The classification accuracy computed with 25% test data varied from 65-81% in terms of F1-score across 48 prefectural regions. This research produced seamless maps of 88 GPE types first time at a country scale with an average 72% F1-score. In addition, mapping of solar panels and vegetation disturbance are added.

The detection of waste plastics in the marine and terrestrial environment using satellite Earth Observation data offers the possibility of large-scale mapping, and reducing on-the-ground manual investigation. In addition, costs are kept to a minimum by utilizing free-to-access Copernicus data. A Machine Learning based classifier was developed to run on Sentinel-1 and -2 data. In support of the training and validation, a dataset was created with terrestrial and aquatic cases by manually digitizing varying landcover classes alongside plastics under the sub-categories of greenhouses, plastic, tyres and waste sites. The trained classifier, including an Artificial Neural Network and post-processing decision tree, was verified using five locations encompassing these different forms of plastic. Although exact matchups are challenging to digitize, the performance has generated high accuracy statistics, and the resulting land cover classifications have been used to map the occurrence of plastic waste in aquatic and terrestrial environments.

Accurate fuel mapping plays a crucial role in fire detection and management strategies. This paper presents a method for discriminating between wildfire fuel types by exploiting together remote sensing data and Convolutional Neural Networks (CNN). Specially, a CNN-based classification approach that leverages Sentinel-2 imagery is exploited to accurately classify fuel types into seven preliminary main classes (conifers, broadleaf, shrubs, grass, bare soil, urban areas, and water bodies) with an high accuracy of 0.99$\%$. To further refine the fuel mapping results, subclasses were generated from the seven principals by using biomass and bioclimatic maps. These additional maps provide complementary information about vegetation density and climatic conditions, respectively. By incorporating this information, we align our fuel type classification with the widely used Scott/Burgan fuel classification system. This refinement step allows for a more detailed and comprehensive assessment of fuel types, enhancing the accuracy and effectiveness of fire management efforts, which can be utilized by fire management agencies, policymakers, and researchers for improved fire behavior prediction and mitigation practices. The proposed approach presents a valuable tool for enhancing fire management, contributing to more effective wildfire prevention and mitigation efforts.

The increasing concern regarding climate change continues to motivate research in the Arctic. Within the delicate cycle of the cryosphere, leads are an important kinematic feature that regulate heat balances in the Arctic. Therefore, it is necessary to quantify the genesis of leads over time to identify when and where changes are occurring. The use of a principal component analysis (PCA) is one such tool that is used to identify the characteristics of seasonal ice variability. The PCA not only identifies “normal” or “dominant” conditions or features, but also extract anomalous spatial features from an archive of long-term sequence of images.

Sentinel-2 can provide multi-spectral optical remote sensing images in RGBN bands with a spatial resolution of 10m, but the spatial details provided are not enough for many applications. WorldView can provide HR multi-spectral images less than 2m, but it is a commercial paid resource with relatively high usage costs. In this paper, without any available reference images, Sentinel-2 images at 10m resolution are improved to a resolution of 2.5m through super-resolution (SR) based on deep learning technology. Our model, named DKN-SR-GAN, uses degradation kernel estimation and noise injection to construct a dataset of near-natural low-high-resolution (LHR) image pairs, with only low-resolution (LR) images and no high-resolution (HR) prior information. DKN-SR-GAN uses the Generative Adversarial Networks (GAN) combined of ESRGAN-type generator, PatchGAN-type discriminator and the VGG-19-type feature extractor, using perceptual loss to optimize the network, so as to obtain SR images with clearer details and better perceptual effects. Experiments demonstrate that in the quantitative comparison of the non-reference image quality assessment (NR-IQA) metrics like NIQE, BRISQUE and PIQE, as well as the intuitive visual effects of the generated images, compared with state-of-the-art models such as EDSR8-RGB, RCAN and RS-ESRGAN, our proposed model has obvious advantages.

Wetlands benefits can be summarized but are not limited to their ability to store floodwaters and improve water quality, providing habitats for wildlife and supporting biodiversity, as well as aesthetic values. Over the past few decades, remote sensing and geographical information technologies has proven to be a useful and frequent applications in monitoring and mapping wetlands. Combining both optical and microwave satellite data can give significant information about the biophysical characteristics of wetlands and wetlands` vegetation. Also, fusing data from different sensors, such as radar and optical remote sensing data, can increase the wetland classification accuracy. In this paper we investigate the ability of fusion two fine spatial resolution satellite data, Sentinel-2 and the Synthetic Aperture Radar Satellite, Sentinel-1, for mapping wetlands. As a study area in this paper, Balikdami wetland located in the Anatolian part of Turkey has been selected. Both Sentinel-1 and Sentinel-2 images require pre-processing before their use. After the pre-processing, several vegetation indices calculated from the Sentinel-2 bands were included in the data set. Furthermore, an object-based classification was performed. For the accuracy assessment of the obtained results, number of random points were added over the study area. In addition, the results were compared with data from Unmanned Aerial Vehicle collected on the same data of the overpass of the Sentinel-2, and three days before the overpass of Sentinel-1 satellite. The accuracy assessment showed that the results significant and satisfying in the wetland classification using both multispectral and microwave data. The statistical results of the fusion of the optical and radar data showed high wetland mapping accuracy, with an overall classification accuracy of approximately 90% in the object-based classification. Compared with the high resolution UAV data, the classification results give promising results for mapping and monitoring not just wetlands, but also the sub-classes of the study area. For future research, multi-temporal image use and terrain data collection are recommended.

We present a simplified atmospheric correction algorithm for the snow/ice albedo retrieval using single view satellite measurements. The validation of the technique is performed using Ocean and Land Colour Instrument (OLCI) on board Copernicus Sentinel - 3 satellite and ground spectral or broadband albedo measurements from locations on the Greenland ice sheet and in the French Alps. Through comparison with independent ground observations, the technique is shown to perform accurately in a range of conditions from a 2100 m elevation mid-latitude location in the French Alps to a network of 15 locations across a 2390 m elevation range in seven regions across the Greenland ice sheet. Retrieved broadband albedo is accurate within 5% over a wide (0.5) broadband albedo range of the (N = 4,155) Greenland observations and with no apparent bias.

Easy to use satellite-based water quality visualizations are needed for monitoring and understanding coastal and inland waters, but to date, no publicly accessible real-time global visualization system was in place. Here we introduce the Ulyssys Water Quality Viewer (UWQV), a Sentinel Hub EO Browser Custom script designed for qualitative views of aquatic chlorophyll and suspended sediment concentrations. The viewer avoids unmixing of the chlorophyll and suspended sediment spectral signal by visualizing these parameters together, with high concentrations of suspended sediment obscuring chlorophyll if present. Cloud masking uses the Hollstein and Braaten algorithms (existing EO Browser custom script code), additionally water surfaces are masked using the Normalized Differential Water Index. Chlorophyll is estimated using reflectance line height-based indicators such as fluorescence line height and maximum chlorophyll index. Suspended sediment is visualized based on single-band reflectances at 620 or 700 nm. Data sources are Sentinel-2 and Sentinel-3 images, allowing either 20 m spatial resolution or up to daily imaging. This visualization system is easy to operate and interpret, and combined with the data service capacity of the Sentinel Hub, it is expected that UWQV will contribute to monitoring of remote water bodies and to our overall understanding of physical limnology and aquatic ecology.

A timely inventory of agricultural areas and crop types is an essential requirement for ensuring global food security. Satellite remote sensing has proven to be an increasingly more reliable tool to identify crop types. With the Copernicus program and its Sentinel satellites, a growing source of satellite remote sensing data is publicly available at no charge. Here we use joint Sentinel-1 radar and Sentinel-2 optical imagery to create a crop map for Belgium. To ensure homogenous radar and optical input across the country, Sentinel-1 12-day backscatter composites were created after incidence angle normalization, and Sentinel-2 NDVI images were smoothed to yield dekadal cloud-free composites. An optimized random forest classifier predicted the 8 crop types with a maximum accuracy of 82% and a kappa coefficient of 0.77. We found that a combination of radar and optical imagery always outperformed a classification based on single-sensor inputs, and that classification performance increased throughout the season until July, when differences between crop types are largest. Furthermore we showed that the concept of classification confidence derived from the random forest classifier provided insight in the reliability of the predicted class for each pixel, clearly showing that parcel borders have a lower classification confidence. We concluded that the synergistic use of radar and optical data for crop classification led to richer information increasing classification accuracies compared to optical-only classification. Further work should focus on object-level classification and crop monitoring to exploit the rich potential of combined radar and optical observations.

The Surface Urban Heat Island (UHI) is caused by the difference in temperature between the urban and its surrounding areas. However, in the scientific literature, there is no solid methodology defining urban and non-urban areas, which is essential to estimate the SUHI with greater accuracy. This study uses the official national urban areas limit, to obtain the SUHI more accurately on the nine northeastern Brazilian capitals. The land surface temperature was obtained using the Sentinel 3 satellite data for the years 2019 and 2020. Afterward, the maximum and average SUHI, and the complementary indexes were calculated, such as the Urban Thermal Field Variation Index (UTFVI) and the Thermal Discomfort Index (TDI) for the urban areas and their surrounding areas. The Maximum and Average SUHI, obtained values between 1.85 and 8.25 and -4.92 and 2.59 degree difference, respectively, proving the SUHI existence in the study areas. The UTFVI, with values between 0.010 and 0.040, expresses how bad the eco-environmental spaces of urban are. The TDI, with values between 24.61 and 28.89 ºC, expresses the population’s thermal comfort. Therefore, this study provides a better understanding of the surface UHI pioneeringly for the Brazilian Northeast Region.

Satellite Crop Detection technologies are focused on detection of different types of crops on the field in the early stage before harvesting. Crop detection is usually done on a time series of satellite data by classification of the desired fields. Currently, data obtained from Remote Sensing (RS) are used to solve tasks related to the identification of the type of agricultural crops, also modern technologies using AI methods are desired in the postprocessing part. In this challenge Sentinel-1 and Sentinel-2 time series data were used due to their periodic availability. Our focus was to develop methodology for classification of time series of Sentinel 2 and Sentinel 1 data and compare how accuracy of classification can be increased, but also how to guarantee availability of data. We analyse phenology of single crops and on the basis of this analysis we started to provide crop classification. Original crop classifications were made from Enhanced Vegetation Index (EVI) layers made from Sentinel-2 time-series data and then we added also . To increase accuracy we also integrate into the process parcel borders and provide classification of fields..

Spatiotemporal variations of sediments transported along rivers play a crucial role in a wide spectrum of uses, such as navigation, recreation, habitats or hydropower production. The advancement in technology has made it possible to use various indirect techniques to study and evaluate the transport of suspended sediment in fluvial environments. To investigate large-scale phenomena, remote sensing is becoming a largely utilized approach, as it allows to combine spatially-distributed and local information. Dam-induced sediment reduction occurs in large and small rivers worldwide, having profound implications on the fluvial systems. However, the systematic change of suspended sediment concentration (SSC) and its dynamic processes are not well known, and generally investigated only at the very local scale using field information. In this work, SSC maps were created by combining satellite images with local monitoring SSC data, using the Zhijiang -Chenglingji reach of the Changjiang River (China) as a case study, and analyzing how SSC dynamics changed over the period 2017-2022 in correspondence of extreme events. Multiple relationships between measured SSC and bands reflectance were tested, showing the potential of the best-performing one (R2=0.43) in mapping SSC spatiotemporal variations over an extent of dozens of kilometres, eventually providing new insights into the SSC dynamics at hotspots of the river systems, such as confluence zones, barriers, and reservoirs.

Due to the intensification of climate change in the world, the incidence of natural disasters is increasing year by year, and monitoring, forecasting, and detecting evolution using satellite imaging technology is an important guide for remote sensing. This study aims to monitor the occurrence of fire disasters using Sentinel-2 satellite imaging technology, to determine the burned severity area with its classification and the recovery process for determining the extraordinary natural phenomena. The study area was sampled in the southeastern part of Mongolia, where have most wildfires in each year, near the Shiliin Bogd mountain in the natural steppe zone and in Bayan-Uul soum in the forest-steppe natural zone. For the methods, the NBR was used to map the area of ​​the fire site and the classification of the burned area into 5 categories: unburned, low, moderate-low, moderate-high, and high, which are process-defined works. NDVI index was used to determine the recovery process in a timely series in the summer from April to October. In result, the burned areas were mapped from the satellite images, and the total burned area of steppe natural zone was 1164.27 km2, of which 757.34 km2 (65.00 percent) was low, 404.57 km2 (34.70 percent) was moderate-low, and remaining 2.36 km2 (0.30 percent) was moderate-high, and the total burned area of forest-steppe natural zone was 588,35 km2, of which 158.75 km2 (26.90 percent) was low, 297.75 km2 (50.61 percent) was moderate-low, 131.25 km2 (22.31 percent) was moderate-high and the remaining 0.60 km2 (0.10 percent) was high-medium. Finally, we believe that this research is most important to helpful for emergency workers, researchers, and environmental specialists.

Boosted by the progress in deep learning, Single Image Super-Resolution (SISR) has gained a lot of interest in the Remote Sensing community, who sees it as an oportunity to compensate for satellite's ever-limited spatial resolution with respect to end users needs. While there has been a great amount of work on network architures in the latest years, deep learning based SISR in remote sensing is still limited by the availability of the large training sets it requires. The lack of publicly available large datasets with the required variability in terms of landscapes and seasons pushes researchers to simulate their own dataset by means of downsampling. This may impair the applicability of the trained model on real world data at the target input resolution. In this paper, we propose an open-data licenced dataset composed of 10m and 20m cloud-free surface reflectance patches from Sentinel-2, with their reference spatially-registered surface reflectance patches at 5 meter resolution acquired on the same day by the VENµS satellite. This dataset covers 29 locations on earth with a total of 132 955 patches of 256x256 pixels at 5 meters resolution, and can be used for the training of super-resolution algorithms to bring the spatial resolution of 8 of the Sentinel-2 bands down to 5 meters.

Automatic ship detection provides an essential function towards maritime domain awareness for security or economic monitoring purposes. This work presents an approach for training a deep learning ship detector in Sentinel-2 multispectral images with few labeled examples. We design a network architecture for detecting ships with a backbone that can be pre-trained separately. By using Self Supervised Learning, an emerging unsupervised training procedure, we learn good features on Sentinel-2 images, without requiring labeling, to initialize our network’s backbone. The full network is then fine-tuned to learn to detect ships in challenging settings. We evaluated this approach versus pre-training on ImageNet and versus a classical image processing pipeline. We examined the impact of variations in the self-supervised learning step and we show that in the few-shot learning setting self-supervised pre-training achieves better results than ImageNet pre-training. When enough training data is available, our self-supervised approach is as good as ImageNet pre-training. We conclude that a better design of the self-supervised task and bigger non-annotated dataset sizes can lead to surpassing ImageNet pre-training performance without any annotation costs.

Wind is one of the factors that has a great influence on suspended matter in lakes, especially in shallow lagoons. In order to know how wind affects the water in Albufera of Valencia, a shallow coastal lagoon, the measured variables of turbidity and transparency have been correlated with the estimates by processing Sentinel-2 satellite images with the Sen2Cor processor. Data from four years of study show that most of them are light to gentle easterly breezes and moderate to fresh westerly breezes. The results obtained show significant correlations between the measured variables and those obtained from the satellite images for total suspended matter and water transparency and with the average daily wind speed. There is no significant correlation between wind and chlorophyll a. Moderate to fresh breezes resuspend the fine sediment reaching concentration values from 100 to 300 mg L-1 according to satellite data. However, it is necessary to obtain field data for the values of moderate and fresh winds, as for now there are no experimental data to verify the validity of the satellite estimates.

Proper satellite-based crop monitoring applications at the farm-level often require near-daily imagery at medium to high spatial resolution. The synthesizing of ongoing satellite missions by ESA (Sentinel 2) and NASA (Landsat7/8) provides this unprecedented opportunity at a global scale; nonetheless, this is rarely implemented because these procedures are data demanding and computationally intensive. This study developed a complete stream processing in the Google Earth Engine cloud platform to generate harmonized surface reflectance images of Landsat7,8 and Sentinel 2 missions. The harmonized images were generated for two agriculture schemes in Bekaa (Lebanon) and Ninh Thuan (Vietnam) during the period 2018-2019. We evaluated the performance of several pre-processing steps needed for the harmonization including image co-registration, brdf correction, topographic correction, and band adjustment. This study found that the miss-registration between Landsat 8 and Sentinel 2 images, varied from 10 meters in Ninh Thuan, Vietnam to 32 meters in Bekaa, Lebanon, and if not treated, posed a great impact on the quality of the harmonized dataset. Analysis of a pair overlapped L8-S2 images over the Bekaa region showed that after the harmonization, all band-to-band spatial correlations were greatly improved from (0.57, 0.64, 0.67, 0.75, 0.76, 0.75, 0.79) to (0.87, 0.91, 0.92, 0.94, 0.97, 0.97, 0.96) in bands (blue, green, red, nir,swir1,swir2, ndvi) respectively. We demonstrated that dense observation of the harmonized dataset can be very helpful for characterizing cropland in highly dynamic areas. We detected unimodal, bimodal and trimodal shapes in the temporal NDVI patterns (likely cycles of paddy rice) in Ninh Thuan province only during the year 2018. We fitted the temporal signatures of the NDVI time series using harmonic (Fourier) analysis. Derived phase (angle from the starting point to the cycle's peak) and amplitude (the cycle's height) were combined with max-NDVI to generate an R-G-B image. This image highlighted croplands as colored pixels (high phase and amplitude) and other types of land as grey/dark pixels (low phase/amplitude). Generated harmonized datasets that contain surface reflectance images (bands blue, green, red, nir, swir1, swir2, and ndvi at 30 meters) over the two studied sites are provided for public usage and testing.

Early-season crop-type data are required for a variety of agricultural monitoring and decision-making applications. The early season in this study referred to the prophase and middle of a growth season. Early-season detection of crop types remains challenging because of limited discriminative features, especially for landscapes that are characterized by complex cropping patterns. In fact, different remote-sensing satellites can increase the frequency of data acquisition, which can provide more information in the early season. Moreover, optical and radar sensors have different degrees of sensitivity to crop parameters. Therefore, the integration and application of two types of multitemporal data are of great significance to improve the accuracy and timeliness of crop type detection.In deep learning (DL), convolutional neural network (CNN) and recurrent neural network (RNN) models have great potential for temporal feature extraction. Compared with RNNs, CNNs usually have fewer parameters and are more conducive to determining early-season detection dates of different crop types, which requires a lot of training because of the need to model on different dates. Nevertheless, revisit dates and temporal intervals of different satellites are usually different, resulting in different data acquisition time series; these data cannot be directly used as input for the same convolutional layer. To address this challenge, a Dual-1DCNN was bulit based on the CNN model in this study. Moreover, an incremental training method was used to attain the network on each data acquisition date and obtained the best detection date for each crop type in the early season. A case study for Hengshui City in China was conducted using time series of Sentinel-1A (S1A) and Sentinel-2 (S2). To verify this method, classical methods support vector machine (SVM) and random forest (RF) were implemented. The results demonstrated the following: (1) the Dual-1DCNN extracted discriminative features from S1A and S2 time series at the early season by producing the highest overall accuracy (OA: 87.23%); (2) for summer maize, cotton, and common yam rhizome, the Dual-1DCNN achieved F1 values of 92.39%, 87.71%, and 84.38%, respectively, at the early season (moreover, the early seasons were almost 40, 70, and 80 days before the end of the growth seasons, respectively). These findings suggested that the Dual-1DCNN is promising for the accurate and timely detection of crop types.

Landslide risk mitigation is limited by data scarcity. This could be improved using continuous landslide detection systems. In order to investigate which image types and machine learning (ML) models are most useful for landslide detection in a Norwegian setting, we compared the performance of five different ML models, for the Jølster case study (30-July-2019), in Western Norway. These included three globally pre-trained models; i) the Continuous Change Detection and Classification (CCDC) algorithm, ii) a combined k-means clustering and Random Forest classification model, and iii) a convolutional neural network (CNN), and two locally-trained models, including; iv) Classification and Regression Trees and v) a U-net CNN model. Images used included Sentinel-1, Sentinel-2, digital elevation model (DEM) and slope. The globally-trained models performed poorly in shadowed areas, and were all outperformed by the locally-trained models. A maximum Matthew’s correlation coefficient (MCC) score of 89% was achieved with model v, using combined Sentinel-1 and -2 images as input. This is one of the first attempts to apply deep-learning to detect landslides with both Sentinel-1 and -2 images. Using Sentinel-1 images only, the locally-trained deep-learning model significantly outperformed the conventional ML model. These findings contribute towards developing a national continuous monitoring system for landslides.

Surface soil moisture (SSM) is a significant factor affecting crop growth. This paper presents a method for retrieving SSM over wheat-covered areas using synergy dual-polarization C-band Sentinel-1 synthetic aperture radar and Sentinel-2 optical data. Firstly, a modified water cloud model (WCM) was proposed to remove the influence of vegetation from the backscattering coefficient of the radar data. The vegetation fraction was then introduced in this WCM, and the vegetation water content (VWC) was calculated using multiple linear regression model. Subsequently, the support vector regression technique was used to retrieve the SSM. This approach was validated using in-situ measurements of the wheat field in Hebi, in the north of Henan Province. The key findings of this study are as follows: (1) Based on vegetation indices obtained from Sentinel-2; the proposed VWC estimation model can effectively eliminate the influence of vegetation; (2) compared with vertical transmit and horizontal receive polarization, vertical transmit and vertical receive polarization is better for detecting changes in SSM at different growth stages of wheat; and, (3) the validation results indicated that the proposed approach, based on Sentinel-1 and Sentinel-2 data, successfully retrieved SSM in the study area.

Eutrophication, a global concern, impacts water quality, ecosystems, and human health. It’s crucial to monitor algal blooms in freshwater reservoirs, as they indicate the trophic condition of a waterbody through Chlorophyll-a (Chla) concentration. Traditional monitoring methods, however, are expen-sive and time-consuming. Addressing this hindrance, we developed models using remotely sensed data from the Sentinel-2 satellite for large-scale coverage, including its bands and spectral indexes, to estimate the Chla concentration on 149 freshwater reservoirs in Ceará, Brazil. Several machine learning models were trained and tested, including k-nearest neighbours, random forests, extreme gradient boosting, the least absolute shrinkage, group method of data handling (GMDH), and sup-port vector machine models. A stepwise approach determined the best subset of input parameters. Using a 70/30 split for the training and testing datasets, the best-performing model was the GMDH, achieving an R2 of 0.91, MAPE of 102.34%, and RMSE of 20.38 g/L, which are values consistent with the ones found in the literature. Nevertheless, the predicted Chla concentration values were most sensitive to the red, green, and near infra-red bands.

Gelephu, located in the Himalayan region, has experienced one of the strongest development activities due to the suitable topography and geographic location, which has led to rapid urbanization. The main objective of the study is to perform land use land cover (LULC) mapping for Gelephu for 2016 and 2023 by a Random Forest (RF) classifier, using the Semi-automatic Classification Plugin (SCP) in QGIS and identify LULC changes. Furthermore, the study assessed the vegetation change dynamics within the study area by analysing the Normalized Difference Vegetation Index (NDVI) for 2016 and 2023. Additionally, the study characterized the resulting LULC change for Gelephu Thromde, a sub-administrative municipal entity, as a result of the notable intensity of the infrastructure development activities. The current study used a framework to collect Sentiniel-2 satellite data, which was then used for pre- and post-processing to create LULC and NDVI maps. The classification model achieved high accuracy, with an area under the curve (AUC) of up to 0.89. The corresponding LULC and NDVI statistics were analysed to determine the current status of the LULC and vegetation indices, respectively. The LULC change analysis reveals urban growth of 5.65% and 15.05% for Gelephu and Gelephu Thromde, respectively. The NDVI assessment shows significant deterioration in vegetation health with a 75.11% loss of healthy vegetation in Gelephu between 2016 and 2023. This research provides the first version of LULC and NDVI maps of Gelephu. The analysis results indicate possible future implications on sustainable development management in Gelephu Bhutan.

Indigenous forests cover 24% of New Zealand and provide valuable ecosystem services. However, a national map of forest types, that is, physiognomic types, which would benefit conservation management, does not currently exist at an appropriate level of detail. While traditional forest classification approaches from remote sensing data are based on spectral information alone, the joint use of space-based optical imagery and structural information from synthetic aperture radar (SAR) and canopy metrics from air-borne Light Detection and Ranging (LiDAR) facilitates more detailed and accurate classifications of forest structure. We present a support vector machine (SVM) classification using data from ESA’s Sentinel-1 and 2 missions, ALOS PALSAR, and airborne LiDAR to produce a regional map of physiognomic types of indigenous forest in New Zealand. A five-fold cross-validation of ground data showed that the highest classification accuracy of 80.9% is achieved for bands 2, 3, 4, 5, 8, 11, and 12 from Sentinel-2, the ratio of bands VH and VV from Sentinel-1, HH from PALSAR, and mean canopy height and 97th percentile canopy height from LiDAR. The classification based on the optical bands alone was 73.1% accurate and the addition of structural metrics from SAR and LiDAR increased accuracy by 7.8%. The classification accuracy is sufficient for many management applications for indigenous forest in New Zealand, including biodiversity management, carbon inventory, pest control, ungulate management, and disease management. National application of the method will be possible in several years, once national LiDAR coverage is achieved, and a national canopy height model is available.

In an era of rapid technological improvements, state-of-the-art methodologies and tools dedicated to protecting and promoting our cultural heritage should be developed and extensively employed in the contemporary built environment and lifestyle. At the same time, sustainability principles underline the importance of the continuous use of historic or vernacular buildings as part of the building stock of our society. Adopting a holistic, integrated, multi-disciplinary strategy can bridge technological innovation with conserving and restoring heritage buildings. The paper presents ongoing research and results of the application of Machine Learning methods for the remote monitoring of the built environment of the historic cluster in Cypriot cities. This study is part of an integrated, multi-scale, and multi-discipline study of heritage buildings towards the creation of an online HBIM platform for urban monitoring.

In the Mediterranean area, vegetation dynamics and phenology analyzed over a long time can have an important role in highlighting changes in land use and cover as well as the effect of climate change. Over the last 30 years, remote sensing has played an essential role in bringing about these changes thanks to many types of observations and techniques. Satellite images are to be considered an important tool to grasp these dynamics and evaluate them in an inexpensive and multidisciplinary way thanks to Landsat and Sentinel satellite constellations. The integration of these tools holds a dual potential: on one hand, allowing to obtain longer historical series of reflectance data, while on the other hand, making data available with a higher frequency even within a specific timeframe. The study aims to conduct a comprehensive cross-comparison analysis of long-time series pixel values in the Mediterranean regions. For this scope comparisons between Landsat-7 (ETM+), Landsat-8 (OLI), and Sentinel-2 (MSI) satellite sensors were conducted based on surface reflectance products. We evaluated these differences using Ordinary Least Squares (OLS) and Major Axis linear regression (RMA) analysis on points extracted from over 15,000 images across the Mediterranean basin area from 2017 to 2020. Minor but consistent differences were noted, necessitating the formulation of suitable adjustment equations to better align Sentinel-2 reflectance values with those of Landsat-7 or Landsat-8. The results of the analysis are compared with the most used harmonization coefficients proposed in the literature, revealing significant differences. The root mean square deviation, the mean difference and the orthogonal distance regression (ODR) slope show an improvement of the parameters for both models used (OLS and RMA) in this study. The discrepancies in reflectance values lead to corresponding variations in the estimation of biophysical parameters, such as NDVI, showing an increase in the ODR slope of 0.3. Despite differences in spatial, spectral, and temporal characteristics, we demonstrate that integration of these datasets is feasible through the application of band-wise regression corrections for a sensitive and heterogeneous area like those of the Mediterranean basin area.

A land cover map of two arctic catchments, nearby the Abisko Scientific Research Station, was obtained from a classification of a Sentinel-2 satellite image and a ground survey performed in July 2022. The two contiguous catchments, Miellajokka and Stordalen, are covered by various ecotypes, from boreal forest to alpine tundra and peatland. The random forests algorithm correctly identified 88% of polygon pixels reserved for testing. The developed workflow relied solely on open source software and acquired ground observations. Space organization was directed by the altitude as demonstrated by the intersection of the land cover with the topography. Comparison between this new land cover map and previous ones based on data acquired between 2008 and 2011 shows some trends of vegetation cover evolution in response to climate change in the considered area.

Evaluating the performance of water indices and mapping the spatial distribution of water-related ecosystems are important for monitoring surface water resources. This is particularly the case for Ethiopia since there is limited information available on water resources development over time despite its relevance for the people and ecosystems. To address this problem, this paper evaluates the performance of seven water indices for country-scale surface water detection based on high spatial and multi-temporal resolution Sentinel-2 data, processed using the Google Earth Engine cloud computing system. Results show that the water index (WI) and automatic water extraction index with shadow (AWEIsh) are the most accurate ones to extract surface water. Comparisons are based on qualitative visual inspections and quantitative accuracy indicators. For the latter, WI and AWEIsh obtained kappa coefficients of 0.96 and 0.95, respectively, and an overall accuracy of 0.98 each. Both indices accounted for similar spatial coverages of surface waters with 82,650 km2 (WI) and 86,530 km2 (AWEIsh) for the whole of Ethiopia.

A land cover map of two arctic catchments, nearby the Abisko Scientific Research Station, was obtained from a classification of a Sentinel-2 satellite image and a ground survey performed in July 2022. The two contiguous catchments, Miellajokka and Stordalen, are covered by various ecotypes, from boreal forest to alpine tundra and peatland. The Random Forest algorithm correctly identified 83% of polygon pixels reserved for testing. The developed workflow relied solely on open source software and acquired ground observations. Space organization was directed by the altitude as shown by the intersection of the land cover with the topography. Comparison between this new land cover map and previous ones based on data acquired between 2008 and 2011 demonstrates some trends of vegetation cover evolution in response to climate change in the considered area. The potential applications in terms of permafrost modeling (hiperborea.omp.eu) are finally discussed.

Crop-type mapping is an important intermediate step for cost-effective crop management at the field level, as an overview of all fields with a particular crop type can be used for monitoring or yield forecasting, for instance. Our study used a data set with 2400 fields and corresponding satellite observations from the federal state of Bavaria, Germany. The study classified corn, winter wheat, winter barley, sugar beet, potato, and winter rapeseed as the main crops grown in Upper Bavaria. We additionally experimented with a rejection class "Other", which summarised further crop types. Corresponding Sentinel-2 data included the normalised difference vegetation index (NDVI) and raw bands from 2016 to 2018 for each selected field. The influence of raw bands compared to NDVI was analysed and the classification algorithms, i.e. support vector machine (SVM) and random forest (RF), were compared. The study showed that the use of an index should be critically questioned and that raw bands provided a wider spectral bandwidth, which significantly improved the mapping of crop types. The results underline the use of RF with raw bands and achieved overall accuracies (OA) of up to 92%. We also predicted crop types in an unknown year with significantly different weather conditions and several months before the end of the growing season. Thus, the influence of climate anomalies and the accuracy depending on the time of prediction were assessed. The crop types of a test site and year without labels could be determined with an OA of up to 86%. The results demonstrate the usefulness of the proof-of-concept and its readiness for use in real applications.

For more than ten years, Central Chile faces drought conditions, which impact crop production and quality, increasing food security risk. Under this scenario, implementing management practices that allow increasing water use efficiency is urgent. The study was carried out in kiwifruit trees, located in the O’Higgins region, Chile; for season 2018-2019 and 2019-2020. We evaluate nine vegetation indices in the VNIR and SWIR regions derived from Sentinel-2 (A/B) satellites to know how much variability in the canopy water status could explain. Over the study's site were installed sensors that continuously measure the leaf's turgor pressure (Yara Water-Sensor). A strong correlation between turgor pressure and vegetation indices was obtained with the Spearman's rho coefficient ($\rho$). However, the NIR range's indices were influenced by the vegetative development of the crop rather than its water status. Red-edge showed better performance as the vegetative growth did not affect it. It is necessary to expand the study to consider higher variability in kiwifruit's water conditions and incorporate the sensitivity of different wavelengths.

In Portugal, cork oak (Quercus suber L.) stands cover 737 Mha, being the most predominant species of the montado agroforestry system, contributing for the economic, social and environmental development of the country. Cork oak decline is a known problem since the late years of the 19th century that has recently worsen. The causes of oak decline seem to be a result of slow and cumulative processes, although the role of each environmental factor is not yet established. The availability of Sentinel-2 high spatial and temporal resolution dense time series enables gradual processes monitoring. These processes can be monitored using spectral vegetation indices (VI) once their temporal dynamics are expected to be related with green biomass and photosynthetic efficiency. The Normalized Difference Vegetation Index (NDVI) is sensitive to structural canopy changes, however it tends to saturate at moderate-to-dense canopies. Modified VI have been proposed to incorporate the reflectance in the red-edge spectral region, which is highly sensitive to chlorophyll content while largely unaffected by structural properties. In this research, in-situ data on the location and vitality status of cork oak trees are used to assess the correlation between chlorophyll indices (CI) and NDVI time series trends and cork oak vitality at the tree level. Preliminary results seem to be promising since differences between healthy and unhealthy (diseased/dead) trees were observed.

The viticulture sector, spanning over 7.3 million hectares worldwide, plays a crucial economic role but faces challenges such as labor shortages, rising production costs, market competition, and climate change stresses. Addressing these issues requires monitoring the spatial and temporal variability in vineyard productivity. Traditional ground-based observations, though accurate, are time-consuming and limited in scope. Precision viticulture, leveraging technologies like GPS, remote sensing, and artificial intelligence, offers efficient, non-destructive monitoring tools. This study aims to develop and test a technological workflow using the mobile app Digivit, integrated with the AgroSat platform, to estimate yield variability in vineyards. The workflow was performed during the 2023 growing season in a series of vineyards near Siena (Italy) and involved two main steps: spatial variability characterization using AgroSat and yield estimation using the mobile Digivit app. AgroSat processed Sentinel-2 NDVI data to identify homogeneous zones, while Digivit used smartphone images of grape clusters to estimate yields. The field campaign, performed three weeks before harvest, involved monitoring representative vines within identified zones and uploading georeferenced images for cluster segmentation analysis. Yield estimates were validated against measured weights, showing a strong linear correlation (R²=0.85, RMSE=43.74g). Excluding one outlier improved correlation to R²=0.95, RMSE=14.58g. Vineyard-level yield predictions were compared with harvest data, achieving an overall error of approximately 7%, in agreement with other methods in the literature. The study demonstrates that the Digivit app provides accurate, timely yield prediction, supporting farmers in harvest planning and winemaking management. The user-friendly mobile app approach facilitates a broader adoption of precision viticulture technologies among farmers, overcoming barriers related to technical expertise.

A two-year experiment was conducted with a local maize hybrid under full irrigation (F), deficit irrigation (D) and rainfed conditions (R) to estimate maize evapotranspiration in Bosnia and Herzegovina. Three approaches (Allen & Pereira (A&P), SIMDualKc (SD), and Vegetation Index (VI)) were used to estimate the actual crop coefficient (Kc act), actual basal crop coefficient (Kcb act), and actual crop evapotranspiration (ETc act) were applied with the dual crop coefficient method and remote sensing (RS) data. While Kcb act from all approaches matched FAO56 tabulated values, SD showed differences, in comparison to A&P, of up to 0.24 in D and R conditions, especially in initial and mid-season stages. VI demonstrated very good performance in all treatments. In F, the obtained Kc act for all approaches during the initial and end stages were higher than the tabulated values, ranging from 0.71-0.87 for Kc ini act and from 0.80-1.06 for Kc end act, while the mid-season period showed very good agreement with the literature. Maize crop evapotranspiration range is 769-813 mm, 480-752 mm, and 332-618 mm for F, D and R, respectively. The results confirmed the suitability of both approaches (SD and VI) to estimate maize crop evapotranspiration under F, with the VI approach demonstrating an advantage in calculating Kcb act, Kc act, and ETc act values under water stress conditions. The 67.6% increase in grain yields with irrigation emphasizes the need to transition from rainfed to irrigation-dependent agriculture, even for drought-resistant crops like maize.

Conventional methods of crop mapping need ground truth information to train the classifier. Thanks to the frequent acquisition allowed by recent satellite missions (Sentinel 2), we can identify temporal patterns that depend on both phenology and crop management. Some of these patterns are specific to a given crop and thus can be used to map it. Thus, we can substitute ground truth information used in conventional methods with agronomic knowledge. This approach was applied to identify irrigated permanent grasslands (IPG) in the Crau area (Southern France) which play a crucial role in groundwater recharge. The grassland is managed by making three mows during the May-October period which leads to a specific temporal pattern of leaf area index (LAI). The mowing detection algorithm was designed using the temporal LAI signal derived from Sentinel 2 observations. The algorithm includes some filtering to remove noise in the signal that might lead to false mowing detection. A pixel is considered a grassland if the number of detected mows is greater than 1. A data set covering five years (2016-2020) was used. The detection mowing number was done at the pixel level and then results are aggregated at the plot level. A validation data set including 780 plots was used to assess the performances of the classification. We obtained a Kappa index ranging between 0.94-0.99 according to the year. These results were better than other supervised classification methods that include training data sets. The analysis of land-use changes shows that misclassified plots concern grasslands managed less intensively with strong intra-parcel heterogeneity due to irrigation defects or year-round grazing. Time series analysis, therefore, allows us to understand different management practices. Real land-use change in use can be observed, but long time series are needed to confirm the change and remove ambiguities with heterogeneous grasslands.

Water quality retrieval for small urban waterbodies by remote sensing get used to be difficult due to coarse spatial resolution of the remote sensing imagery. The recently launched Sentinel-2 produces imagery with a spatial resolution of 10 m. It provides an opportunity to solve the problem of retrieving water quality for small waterbodies. Additionally, many water management issues also require fine resolution of imagery, e.g. illegal discharge to an urban waterbody. Since illegal discharges are an important issue for urban water management, chemical oxygen demand (COD), total phosphorous (TP), and total nitrogen (TN) were chosen as the target parameters for water quality retrieval in this study. COD, TP and TN, however, are non-optically active parameters. There were limited studies in the past to retrieve these parameters in comparison with optically active parameters, e.g. Chlorophyll-A etc. This study compared three machine learning models, namely Random Forest (RF), Support Vector Regression (SVR), and Neural Networks (NN), to investigate the opportunity to retrieve the above non-optically active parameters. Results showed that R² of TP, TN, and COD by NN, RF and SVR were 0.94, 0.88, and 0.86, respectively. The performances of water quality retrieval for these non-optically active parameters were significantly improved by the optimized machine learning models. These models hence solved the problem to use remote sensing data to retrieve these non-optically active water quality parameters and provided a new monitoring strategy for small waterbodies. Water quality mapping obtained by Sentinel-2 imagery provided a full spatial coverage of the water quality characterization for the entire water surface. Compared with water samples collecting and testing, it greatly reduced labor cost, reagents cost, and waste treatment cost. It also may help identify illegal discharges to urban waterbodies. The method developed in this research provides a new practical and efficient water quality monitoring strategy in managing water with consideration of environmental sustainability.

The Mediterranean basin is a hot spot of climate change where the Posidonia oceanica (L.) Delile (PO) and other seagrass are under stress due to its effect on marine habitats and the rising influence of anthropogenic activities (tourism, fishery). The PO and seabed ecosystems, in the coastal environments of Pantelleria and Lampedusa, suffer additional growing impacts from tourism in synergy with specific stress factors due to increasing vessel traffic for supplying potable water, fossil fuels for electrical power generation. Earth Observation (EO) data, provided by high resolution (HR) multi/hyperspectral operative satellite sensors of the last generation (i.e. Sentinel 2 MSI and PRISMA) have been successfully tested, using innovative calibration and sea truth collecting methods, for monitoring and mapping of PO meadows under stress, in the coastal waters of these islands, located in the Sicily Channel, to better support the sustainable management of these vulnerable ecosystems. The area of interest in Pantelleria was where the first prototype of the Italian Inertial Sea Wave Energy Converter (ISWEC) for renewable energy production was installed in 2015, and sea truth campaigns on the PO meadows were conducted. The PO of Lampedusa coastal areas, impacted by ship traffic linked to the previous factors and tropicalization effects of Italy southernmost climate change transitional zone, was mapped through a multi/hyper spectral EO-based approach, using training/testing data provided by side scan sonar data, previously acquired. Some advanced machine learning algorithms (MLA) were successfully evaluated with different supervised regression/classification models to map seabed and PO meadow classes and related Leaf Area Index (LAI) distributions in the areas of interest, using multi/hyperspectral data atmospherically corrected via different advanced approaches.

Reservoirs created by damming rivers significantly modify the environment and problems may arise: the storage of nutrients and organic matter in reservoirs often leads to decreased water quality due to eutrophication. Reservoirs built on lowland rivers are exposed to significant nutrient loads, often leading to eutrophication. In this article, the Sulejów Reservoir, in Central Poland, was the subject of the research, which focused on the use of Sentinel-2 remote sensing data to detect phytoplankton blooms, and on understanding the pattern of wind-driven surface currents using the CCHE2D model (a depth-averaged hydrodynamic model). The calculation of the total phosphorus load has shown that the reservoir mainly acts as nutrient storage. Still, during the low flow and intensive phytoplankton bloom, it can be a source of nutrients. The distribution of phytoplankton bloom on the Sulejów Reservoir was documented using eight Sentinel-2 satellite images from the vegetation season of 2020 and the Normalized Difference Chlorophyll Index (NDCl). Coupling remote sensing data and numerical modelling helps to interpret the hydrodynamic model results and understand nutrients and sediment dynamics within the reservoir. Hydrodynamic modelling combined with remote sensing data can be a valuable tool for selecting appropriate locations for water quality measurements at monitoring stations.

The characteristics of the Sentinel-2 mission with a decametric resolution and frequent acquisitions allow to improve the identification of crops. The majority of the studies on crop classification using RS were targeted at herbaceous and gramineous crop classes while fewer results were obtained on woody crops which present a strong variability in management practices that make their identification difficult. Thus, this study aimed to propose a rapid, accurate, and cost-effective analytical approach for the delineation of fruit orchards (OC), vineyards (VY), and olive groves (OL) in the Mediterranean (Southern France) considering two locations. A classification based on phenology metrics (PM) de-rived from temporal Sentinel-2 time series was developed to perform the classification. The PM were computed by fitting a double logistic model on temporal profiles of vegeta-tion indices to delineate OC, VY, and a DC class gathering all remaining surfaces. The generated PM were introduced in a random forest (RF) algorithm to identify woody crops across the two sites. The method was tested on different vegetation indices, the best results being obtained with the leaf area index (LAI). To delineate OL in the DC class, the tem-poral features of the green chlorophyll vegetation index (GCVI) were found to be the most appropriated with a typical drop of the signal during the mid-season (DOY 150-250). As a final result, we obtained an overall accuracy ranging from 89-96% and Kappa of 0.86-0.95 by considering each study site and year (2016-2021), separately. This accuracy is much better than applying the RF algorithm on the LAI times series, which led to a Kappa rang-ing between 0.3 and 0.52 and demonstrates the interest of using phenological traits rather than the raw time series of the RS data. The method can be well reproduced from one year to another. Moreover, it is possible to apply the classification model of a given year to an-other, keeping good accuracy. This is an interesting feature to reduce the burden of col-lecting ground truth information. On the contrary, the use of a classification model cali-brated in one site and applied to another led to a strong degradation of the classification accuracy. Woody crop phenology is dependent on site climatic conditions as well as the cultivar and management practices that can differ from one site to another.

This study aimed to investigate the possibility of using one-shot hyperspectral airborne images to recognize crops for an area with many small plots. The results showed that unsupervised clustering methods could classify crops with an accuracy of 80%, which improved to 90% when restricted to only grain crops, using a single airborne hyperspectral recording. However, additional layers such as NDVI, DTM, slope, and aspect did not improve classification accuracy. For comparison, the accuracy of clustering time series Sentinel-2 images with NDVI layers and DTM-derived data yielded an accuracy of: 74% ,Sentinel-2 time series 68% and single one registration before harvest - 39%. The results of the random forest classification were slightly less accurate due to a lack of sufficient reference data. However, it is challenging to verify the reported accuracy of crop recognition in the literature above 90% due to differences in analysis methodologies, reference data selection, pixel/object approaches, metric choice, and calculation formulas used.

Observing cultivated crops and other forms of land use is an important environmental and economic concern for agricultural land management and crop classification. Crop categorization offers significant crop management data, ensuring food security, and developing agricultural policies. Remote sensing data, especially publicly available Sentinel 1 and 2 data, has effectively been used in crop mapping and classification in cloudy places because of their high spatial and temporal resolution. This study aimed to improve crop type classification by combining Sentinel-1 (Synthetic Aperture Rader (SAR)) data and the Sentinel-2 Multispectral Instrument (MSI) data. In the study, Random Forest (RF) and Classification and Regression Trees (CART) classier were used to classify grain crops (Barley and Wheat). The classification results based on the combination of Sentinel-2 and Sentinel-1 data indicated an overall accuracy (OA) of 93 % and a kappa coefficient (K) of 0.896 for RF and (89.15%, 0.84) for the CART classifier. It is suggested to employ a mix of radar and optical data to attain the highest level of classification accuracy since doing so improves the likelihood that the details will be observed in comparison to the single-sensor classification technique and yields more accurate results.

Quaking aspen (Populus tremuloides Michx.) is an important deciduous species in western U.S. forests. Existing maps of aspen distribution are based on Landsat imagery and often miss small stands (<0.09 ha or 30 m²), which rapidly regrow when managed or following disturbance. In this study, we present methods for deriving a new regional map of aspen forests using one year of Sentinel-1 (S1) and Sentinel-2 (S2) imagery in Google Earth Engine. We assessed the annual phenology of aspen in the Southern Rockies and leveraged the frequent temporal resolution of S1 and S2 to create ecologically relevant seasonal composites. Additionally, we derived spectral indices and radar textural features targeting the canopy structure, moisture, and chlorophyll content. Using spatial block cross-validation and Random Forests, we assessed the accuracy of different scenarios and selected the best performing set of features for classification. Comparisons were then made with existing landcover products across the study region. The resulting map improves on existing landcover products in both accuracy (average F1-score = 93.1%) and detection of smaller forest patches. These methods enable accurate mapping at spatial and temporal scales relevant to forest management for one of the most widely distributed tree species in North America.

A land cover map of two arctic catchments, nearby the Abisko Scientific Research Station, was obtained from a classification of a Sentinel-2 satellite image and a ground survey performed in July 2022. The two contiguous catchments, Miellajokka and Stordalen, are covered by various ecotypes, from boreal forest to alpine tundra and peatland. Two classification algorithms, support vector machine and random forest, were tested and gave very similar results. The percentage of correctly classified pixels was over 88% in both cases. The developed workflow relies solely on open source software and acquired ground observations. Space organization was directed by the altitude as demonstrated by the intersection of the land cover with the topography. Comparison between this new land cover map and previous ones based on data acquired between 2008 and 2011 shows some trends of vegetation cover evolution in response to climate change in the considered area. This land cover map is key input data for permafrost modeling, and hence for the quantification of climate change impacts in the studied area.

Reliable estimates of poplar plantations area are not available at the French national scale due to the unsuitability and low update rate of existing forest databases for this short-rotation species. While supervised classification methods have been shown to be highly accurate in mapping forest cover from remotely sensed images, their performance depends to a great extent on the labelled samples used to build the models. In addition to their high acquisition cost, such samples are often scarce and not fully representative of the variability in class distributions. Consequently, when classification models are applied to large areas with high intra-class variance, they generally yield poor accuracies. In this paper, we propose the use of active learning (AL) to efficiently adapt a classifier trained on a source image to spatially distinct target images with minimal labelling effort and without sacrificing classification performance. The adaptation consists in actively adding to the initial local model, new relevant training samples from other areas, in a cascade that iteratively improves the generalisation capabilities of the classifier, leading to a global model tailored to different areas. This active selection relies on uncertainty sampling to directly focus on the most informative pixels for which the algorithm is the least certain of their class labels. Experiments conducted on Sentinel-2 time series showed that when the same number of training samples was used, active learning outperformed passive learning (random sampling) by up to 5% of overall accuracy and up to 12% of class F-score. In addition, and depending on the class considered, the random sampling required up to 50% more samples to achieve the same performance of an active learning-based model. Moreover, the results demonstrate the suitability of the derived global model to accurately map poplar plantations among other tree species with overall accuracy values up to 14% higher than those obtained with local models. The proposed approach paves the way for national-scale mapping in an operational context.

The study conducts a comparative analysis of solar radiation estimation methods, assessing the efficacy of the Heliosat-2 algorithm against ground measurements across seven distinct countries: Netherlands, Spain, Japan, Namibia, South Africa, Saudi Arabia, and India. To achieve this, it utilizes two distinct satellite data sources—Himawari-8 for Japan and Metosat Second Generation-MSG for the rest of the countries—spanning the years Jan 2022 to April 2024. A robust methodology for determining albedo parameters specific to Heliosat-2 was developed. During cloudy days, the estimates provided by Heliosat-2 generally exceeded the ground measurements in all the countries. Conversely, on clear days, there was a tendency for underestimation, as indicated by the median value of the mean bias (MB) across most of the countries. The Heliosat-2 model slightly underestimates daily radiation values, with a median MB ranging from −27.5 to +10.2 W.m⁻². Notably, the median root mean squared error (RMSE) on clear days is significantly lower, with values ranging from 24.8 to 108.7 W.m⁻², compared to cloudy days where RMSE values lie between 75.3 and 180.2 W.m⁻². In terms of R² values, both satellites show a strong correlation between the estimated and actual values, with a median value consistently above 0.86 on a monthly scale and over 92% of daily data points falling within ±2 standard deviation.

Employing remote sensing techniques to evaluate crop residue cover (CRC) enables rapid mapping of tillage practices over large cropland areas, which has significant practical implications for monitoring the implementation of conservation tillage practices. This research utilized Sentinel-2 MSI and Landsat-8 OLI remotely sensed data, various spectral indices were calculated and the datasets were correlated with the field-measured CRC data. Selected spectral indices, highly significantly correlated, were chosen to build a correlation model between the indices and the CRC. Considering Sentinel-2 MSI and Landsat 8 OLI remotely sensed data variations in spectral and spatial scales, the accuracy of CRC models was evaluated using R2 and RMSE values. From the results, it's evident that all six spectral indices, including STI, NDTI, SRNDR, NDI5, NDI7 and NDSVI, registered correlation coefficients with the CRC exceeded 0.3 in the study area. STI and NDTI showed a stronger correlation to CRC, with coefficients of 0.810 and 0.803, respectively. For the Landsat 8 data, the lowest correlation obtained was for NDSVI with the Landsat 8 data with a correlation coefficient of 0.358. Applying the linear regression technique, STI and NDTI obtained higher accuracy compared to other indices in the Sentinel-2 MSI data. For NDTI and STI, The R2 values were 0.650 and 0.665, respectively, while their corresponding RMSE values were 3.96% and 4.03%. The highest model accuracy was obtained for the STI and NDTI constructed from the Landsat 8 OLI data (R2 values 0.41 and 0.40; RMSE values 5.25% and 5.27%, respectively). The CRC model built using partial least squares regression (PLSR) exhibited greater precision when applied to the Sentinel-2 MSI data (R2 value 0.894; RMSE value 2.18%) in comparison to the Landsat 8 OLI data (R2 value 0.695; RMSE value 3.70%). PLSR has the potential to enhance the precision of the model. In addition, the study area shows that the estimation of the CRC is better in the one-dimensional linear regression model and the PLSR model created with the Sentinel-2 MSI optical data compared to the Landsat 8 OLI optical remotely sensed data. The validation suggests that the CRC estimation in the study area is more precise when using the model relying on Sentinel-2 satellite imagery rather than the Landsat 8 OLI imagery.

Water quality is the measure of chemical, physical and biological suitability of water in relation to natural effects and intended purpose which may affect human health and aquatic life. Assessment of water quality is very essential for the management of water resources and human health. Traditionally, in-situ measurements have been used to obtain the water quality parameters of the water bodies. However, with the availability of satellite images, researchers have shown that satellite images are a reliable tool that can be used to estimate water quality. Satellite image-derived water quality parameters provide extensive spatial extent and large temporal variations when compared to traditional in situ sample collection and laboratory measurements. The present work estimated several parameters for quality of water in the Kamuzu reservoir of Lilongwe River for the 2013-2020 period using Sentinel-2 and Landsat-8 satellite images. The band ratio algorithms were used to retrieve Chlorophyll a (Chl-a), Turbidity, Total Suspended Matter (TSM), Secchi depth, Coloured Dissolved Organic Matter (CDOM), and Cyanobacteria from the reservoir. Turbidity and TSM were compared with the in-situ data collected over the same period. The comparison indicated R² of 0.9 and 0.69 for TSM and Turbidity respectively from Sentinel-2 images whereas R² of 0.56 and 0.61 was obtained using Landsat 8 images which are quite encouraging. The other set of results included the spatial distribution maps of water quality parameters using Landsat-8 and Sentinel-2 satellite data. It was observed that the spatial distribution of water quality parameters, except for CDOM and Cyanobacteria, showed very good distribution and matches with the theoretical results. However, for CDOM and Cyanobacteria, the distribution was almost similar for the entire study area and the band ratio algorithm may not be able to estimate them quite reasonably. This research reiterates the need for the use of remote sensing in estimating the water quality parameters and may be a substitute to the in-situ data, in terms of spread and frequency, which is very common to most of the water bodies, across the globe.

A national green planning strategy has recently been introduced in the Italian urban planning sector, aimed at making all local initiatives undertaken nationwide consistent with each other. At a regional level, Friuli Venezia-Giulia has recently implemented a Landscaping Plan, which is of an urban planning and ecological nature at an intermediate level between national and local. This article describes the local green plan of Latisana, which has been entitled Ecopolitana, given that it is represents the experimental phase, at a regional level, of the possibilities offered by landscape planning and design. Specifically, it outlines the multi-disciplinary approach used, demonstrating how landscape planning can be compared to the sustainable development of cities, with specific regard to the agricultural sector. Regarding the agricultural sector, a low-intensity cropping model is also suggested, based on the principles of agroecology and landscape ecology, which has already been implemented in the historical rural landscape of Plasencis (UD) and developed through GIS analysis and remote sensing processes. Its aim is to be the starting point for the achievement of the goals set in the 2030 Agenda, and especially Goals 13 (Climate action) and 15 (Life on land), given the current scarcity of agroecological infrastructures in the area of Latisana (UD) and the high percentage of soil used for intensive cropping.

The processing of cloud free geo-referenced imagery is one of the preliminary processing step of any land application. This letter describe the methodology developed to obtain a seamless cloud free composite of Africa for 2016 using Sentinel-2A data at 10 meters resolution freely available from the European Space Agency. The method is based on an hybrid method resulting from the merging of the two most robust time series methods namely the "darkest pixel" and the "maximum NDVI" previously developed with AVHRR time series.

Quantifying forest carbon storage to better manage climate change and its effects requires accurate estimation of forest structural parameters such as canopy height. Variables from remote sensing data and machine-learning models are tools that are being increasingly used for this purpose. This study modelled canopy height of forest-savannah mosaics in the Sudano-Guinean zone of Togo. Relative heights were extracted from GEDI and ICESat-2 products, which were combined with optical, radar and topographic variables for canopy height modelling. We tested four methods: Random Forest (RF); Support Vector Machine (SVM); Extreme Gradient Boosting (XGBoost); and Deep Neural Network (DNN). The RF algorithm obtained the best predictions using 98% relative height (RH98). The best performing result was obtained from variables extracted from GEDI data (r = 0.84; RMSE = 4.15 m; MAE = 2.36 m), compared to ICESat-2 (r = 0.65; RMSE = 5.10 m; MAE = 3.80 m). Models that were developed during the study, from the combination of multisource and multisensor data, can be applied over large areas in forest-savannah mosaics, thereby contributing to better monitoring of forest dynamics according to the objectives and requirements of REDD+.

Unmanaged forest ecosystems play a critical role in addressing the ongoing climate and biodiversity crises. As there is no commercial interest in monitoring the health and development of such inaccessible habitats, low-cost assessment approaches are needed. We used a method combining RGB imagery acquired using an Unmanned Aerial Vehicle (UAV), Sentinel-2 data and field surveys to determine the carbon stock of an unmanaged forest in the UNESCO World Heritage Site wilderness area Dürrenstein-Lassingtal in Austria. The entry-level consumer drone (DJI Mavic Mini) and free of charge Sentinel-2 multispectral datasets were used for the evaluation. We merged the Sentinel-2 derived vegetation index NDVI with aerial photogrammetry data and used an orthomosaic and a Digital Surface Model (DSM) to map the extent of woodland in the study area. The Random Forest (RF) Machine Learning (ML) algorithm was used to classify land cover. Based on the acquired field data, the average carbon stock per hectare of forest was determined to be 371.423 ± 51.106 t of CO2 and applied to the ML-generated classification. An overall accuracy of 80.8% with a Cohen’s kappa value of 0.74 was achieved for the land cover classification, while the carbon stock of the living Above-Ground Biomass (AGB) was estimated with an accuracy of -1.0% (± 5.9%). In conclusion, the proposed approach demonstrated that the combination of low-cost remote sensing data and field work can predict above-ground biomass with high accuracy. The results and the estimation error distribution highlight the importance of accurate field data.

Bhutan located in the Hindu Kush Himalayan (HKH) region consists of several glaciers and glacial lakes at higher elevations.  With the rapid change in global temperature, glaciers are found to melt at an accelerated rate. This rapid melt of glaciers gets accumulated in weak moraine walls forming a glacial lake, posing a major threat to the downstream communities. As per the Bhutan Glacial Lake Inventory 2021, Bhutan has 567 glacial lakes. Furthermore, the Phochhu basin has the maximum glacial lakes (0.05%) and of which 9 are PDGL. Hence a need for a time monitoring system is imminent. With the availability of free High-resolution Satellite Imageries and Advanced Remote Sensing tools, it has been a sine qua no for monitoring glacial lakes in high areas. Therefore, using the Google Earth Engine and Qgis Platform a semi-automated technique was used to generate glacial lake inventories for Phochhu Sub-basin for the year 2021.  We found out that there are 166 glacial lakes covering an area of 24.051 km2.

Forest fires are part of a set of natural disasters that have always affected regions of the world typically characterized by a tropical climate with long periods of drought. However, due to climate change in recent years, other regions of our planet have also been affected by this phenomenon, never seen before. One of them is certainly the Italian peninsula, and especially the regions of southern Italy. For this reason, the scientific community, as well as remote sensing one, is highly concerned in developing reliable techniques to provide useful support to the competent authorities. In particular, three specific tasks have been carried out in this work: (i) fire risk prevention, (ii) active fire detection, and (iii) post-fire area assessment. To accomplish these analyses, the capability of a set of spectral indices, derived from spaceborne remote sensing (RS) data, is assessed to monitor the forest fires. The spectral indices are obtained from Sentinel-2 multispectral images of the European Space Agency (ESA), which are free of charge and openly accessible. Moreover, the twin Sentinel-2 sensors allow to overcome some restrictions on time delivery and observation repeat time. The performance of the proposed analyses were assessed experimentally to monitor the forest fires occurred in two specific study areas during the summer of 2017: the volcano Vesuvius, near Naples, and the Lattari mountains, near Sorrento (both in Campania, Italy).

We performed the accuracy assessment of three different Normalized Difference Water Indices (NDWIs) in water bodies during April 2019, a period in which floods occurred in a large proportion of the Southwest of the Buenos Aires Province (Argentina). The accuracy of the estimations using spaceborne medium-resolution multi-spectral imaging, and the reliability of three NDWIs to highlight shallow water features in satellite images, was evaluated using a high resolution airbone imagery as ground-truth. It is shown that these indices computed using Landsat 8 and Sentinel-2 imagery are only loosely correlated to the actual flooded area in shallow waters. Indeed, NDWI values vary significantly depending on the satellite mission used and the type of index computed.

United Nations Framework Convention on Climate Change (UNFCCC) has recently established the Reducing Emissions from Deforestation and forest Degradation (REDD+) program that requires countries to report their carbon emissions and sink estimates through national greenhouse gas inventories (NGHGI). Thus, developing automatic systems capable of estimating the carbon absorbed by forests without in-situ observation becomes essential. To support this important need, in this work we introduce ReUse, a simple but effective deep-learning approach to estimate the carbon absorbed by forest areas based on remote sensing. The novelty of the proposed method is in the use of the public above-ground biomass (AGB) data from the European Space Agency's Climate Change Initiative Biomass project as ground truth to estimate the carbon sequestration capacity of any portion of land on Earth using Sentinel-2 images and a pixel-wise Regressive UNet. The approach has been compared to two literature proposals, using a private dataset and human-engineered features. The results show a greater generalization ability of the proposed approach, with a decrease in Mean Absolute Error and Root Mean Squared Error, respectively, of 16.9 and 14.3 in the area of Vietnam and 4.7 and 5.1 in the area of Myanmar over the runner-up. Finally, as a case study, we reported an analysis made for the Astroni area, a nature reserve located near the metropolitan area of Naples in southern Italy, struck by a large fire, producing predictions consistent with values found by experts in the field. These results further support the use of such an approach for the early detection of AGB variations, both in urban and rural areas.

For many tick-borne organisms, dogs may be utilized as sentinel hosts to estimate the risk of human infection. The detection of antibodies in these animals indicates the circulation of pathogens in each location for a set period of time. The standard protocol for the surveillance of tick-borne diseases established by the Brazilian National Reference Laboratory for Rickettsiosis at the Ezequiel Dias Foundation (FUNED) includes testing the seropositivity of dogs for Rickettsia spp. and Ehrlichia canis. Dog serum samples were collected during FUNED’s surveillance protocol in a preserved area in Brazil. Despite Anaplasma phagocytophilum being endemic in Brazil, this agent is not included in FUNED’s standard protocol. To determine if A. phagocytophilum should be included in the standard testing protocol, a collaboration with Fuller Laboratories was established and the seropositivity for A. phagocytophilum was tested. The estimated prevalence for singular infections: 25% Rickettsia spp.; 52.3% E. canis; and 70.5% A. phagocytophilum. The estimated prevalence for co-infections: 17% Rickettsia spp. and E. canis; 18.2% Rickettsia spp. and A. phagocytophilum; 39.8% E. canis and A. phagocytophilum; and 13.6% Rickettsia spp., E. canis, and A. phagocytophilum. These results confirmed a significant presence of A. phagocytophilum and establishes a potential threat upon the public health.

The extensive use of carrier-aided smoothing code (CSC) filter has led to reduce the noise level of raw code measurements in GNSS positioning and navigation applications. However, the existing CSC technique is sensitive to the changes of the integer ambiguity and then the smoothing proce-dure needs to be restarted in the presence of cycle-slips. As the Doppler shift is instantaneous ob-servation and immune to cycle-slips, Doppler-aided smoothing code (DSC) algorithm would be more promising in challenged environment. Based on the Hatch-filter, an optimal DSC approach is proposed with the principle of minimum variance. Meanwhile, to inhibit the effect of integral cumulative error of Doppler, a balance factor is adopted to adjust the contributions of raw code and DSC. The noise level of code observable is not only affected by thermal noise, but also limited by systematic bias. Satellite code bias (SCB) has been identified in the raw code observable on each frequency for each BDS-2 satellite. By minimizing the sum of absolute value of residuals, polyno-mial segment fitting algorithm as a function of elevation-angles is applied to establish the SCB cor-rection model based on epoch-differenced Multipath (MP) deviations. Finally, numerical experi-ments demonstrate the validity and efficiency of the refined DSC filter with SCB corrections on each available frequency for BDS-2 un-GEO satellites.

We describe an efficient approach to radiometrically flatten geocoded stacks of calibrated synthetic aperture radar (SAR) data for terrain-related effects. We use simulation to demonstrate that, for the Sentinel-1 mission, one static radiometric terrain flattening factor derived from actual SAR imaging metadata per imaging geometry is sufficient for flattening interferometrically compliant stacks of SAR data. We quantify the loss of precision due to application of static flattening factors, and show that these are well below stated requirements of change detection algorithms. Finally, we discuss the implications of applying radiometric terrain flattening to geocoded SAR data instead of the traditional approach of flattening data provided in the original SAR image geometry. The proposed approach allows for efficient and consistent generation of five different Committee of Earth Observation Satellites (CEOS) Analysis Ready Dataset (ARD) families - Geocoded Single Look Complex (GSLC), Interferometric Radar (InSAR), Normalized Radar Backscatter (NRB), Polarimetric Radar (POL) and Ocean Radar Backscatter (ORB) from SAR missions in a common framework.

We describe an efficient and cost effective data access mechanism for Sentinel-1 TOPS 1 mode bursts. Our data access mechanism enables burst-based data access and processing, thereby 2 eliminating ESA’s Sentinel-1 SLC data packaging conventions as a bottleneck to large scale processing. 3 Pipeline throughput is now determined by available compute resources and efficiency of the analysis 4 algorithms. For targeted infrastructure monitoring studies, we are able to generate coregistered, 5 geocoded stacks of SLCs for any AOI in the world in a few minutes. In addition, we describe our 6 global scale radar backscatter and interferometric products and associated pipeline design decisions 7 that ensure geolocation consistency across the suite of derived products from Sentinel-1 data. Finally, 8 we discuss the benefits and limitations of working with geocoded SAR SLC data.

An oceanic radar altimeter such as TOPEX/Poseidon (T/P) is typically for observing elevation changes over the open oceans or large inland lakes/rivers, with limited applications over solid earth due to its large footprint and susceptibility to waveform contamination and slope effect. Here we demonstrate that it is possible to construct a long-term time series of glacier elevation change from T/P-series radar altimeters over two flat surfaces near a glacier terminus and an icefield (Sites A and B, with slopes of 2° and 0.8°) in Mt. Tanggula, Tibet, at elevations over 5400 m. We retracked radar waveforms using the subwaveform threshold algorithm, selected quality altimeter data (1/4 of the original) with nearly the same slope and adjusted the original elevations by fitting with a time-varying, 2nd order surface. The glacier elevation changes at the two sites from T/P (1993–2002) show seasonal elevation oscillations with linear rates at about −3 m/year and abnormal seasonal changes around the 1997–98 El Niño. Site A is over a deep valley in southern Tanggula. Its elevation dropped about 30 m over 1993–2002 (from T/P) and the glacier almost disappeared by 2016 (from altimeters and satellite images). Despite the sporadic Jason-2 and Jason-3 altimeter data, we also derived long-term rates of glacier elevation change over 1993–2017. Landsat-derived glacier area and elevation changes near the two sites confirm the rapid glacier thinning from the altimeters. The glacier meltwater near Site A supplied increasing source water to Chibuzhang Co west of Mt. Tanggula, contributing partially to its accelerated rising lake level. The glacier thinning at Site B (icefield) was correlated with the increased discharge of the Tuotuo River in eastern Mt. Tanggula, a source region of the Yangtze River. The successful detection of glacier thinning at the two sites shows that T/P-series altimeters can serve as a virtual station at a flat glacier spot to monitor long-term glacier elevation changes in connection to climate change. This virtual station concept is particularly useful for inaccessible glaciers, but its implementation faces two challenging issues: increasing the volume of quality altimeter data and improving the ranging accuracy over a targeted mountain glacier spot.

Fire regimes in mountain landscapes of southern Europe have been shifting from their baselines due to the accumulation of fuel fostered by long-standing rural abandonment and fire exclusion policies. Understanding the role of fire on biodiversity is paramount to implement adequate management to mitigate the impacts of altered fire regimes and land abandonment on biodiversity. Here, we explored to what extent the spatiotemporal variation in burn severity has affected bird abundance of a mountain abandoned landscape located in the Atlantic-Mediterranean transition (NW Iberia). We took advantage of: (1) satellite images of Sentinel 2 and Landsat missions to compute burn severity indicators from 2010 to 2020, and (2) standardized bird surveys carried out over 206 point-counts along the breeding season of 2021. Bird abundance models were built from burn severity metrics together with well-known fire regime attributes (% of burnt area and time since fire). Our results showed that the spatiotemporal variation of burn severity significantly correlated with the abundance of the 39% of the modeled species, supporting the role of pyro-diversity in driving bird populations in our region. The burnt area also explained abundance patterns for 28% of species. Time since fire only correlated with the abundance of 3 species. Our findings confirm the importance of incorporating burn severity indicators into the toolkit of decision makers to anticipate the response of birds to fire management.

The presented study demonstrates the bi-sensor approach suitable for rapid and precise up-to-date mapping of forest canopy gaps for the larger spatial extent. The approach makes use of UAV RGB images on smaller areas for highly precise forest canopy mask creation. Sentinel-2 was used as a scaling platform for transferring information from UAV to a wider spatial extent. The various approaches of the improvement of the predictive performance were examined: (I) the highest R2 of the single satellite index was up to 0.57, (II) the highest R2 using multiple features obtained from the single date, S-2 image was 0.624 and, (III) the highest R2 on the multi-temporal set of S-2 images, was 0.697. Satellite indices such as ARVI, IPVI, NDI45, PSSRa, MCARI, CI, RI, and NDTI were the dominant predictors in most of the ML algorithms. The more complex ML algorithms such as SVM, Random Forest, GBM, XGBoost, and Catboost that provided the best performance on the training set exhibited weaker generalization capabilities. Therefore, a simpler and more robust Elastic Net algorithm was chosen for the final map creation.

Background – Mali was one of the first countries in sub-Saharan Africa to initiate a National Schistosomiasis Control Programme (NSCP) in 1982. The WHO's 2021-30 roadmap sets out criteria for eliminating and controlling schistosomiasis as a public health problem. Our study aimed to assess the impact of annual Mass Drug Distribution (MDD) with praziquantel (PZQ) among school-age children in the sentinel sites (SS) of the NSCP. Methods –The study took place at twelve SS in Kayes and Koulikoro regions. Two-round observational cross-sectional studies were carried out in December 2014-2015 and in April 2018 after four to five years of annually MDD. Overall, 2442 schoolchildren aged 7 to 14 were successfully examined. The urine filtration and Kato-Katz method were used for determining Schistosoma haematobium and S. mansoni eggs, respectively. Results –Of the twelve SS treated from 2014-2015, one has achieved the criterion of elimination of S. haematobium as a public health problem (prevalence of heavy intensity infection PHI < 1%) (ie, ≥50 S. haematobium eggs per 10 mL of urine or ≥400 S. mansoni eggs per g of stool), four met the morbidity control criterion (PHI< 5%) while two sites remained confined below the morbidity control criterion (PHI>5%). Five SS had no heavy intensity infection. The prevalence of S. mansoni was less than 1%. Conclusion –The impact evaluation of MDD with praziquantel in the SS of NSCP highlights that MDD has significantly reduced the PHI of schistosomiasis. However, the high prevalence of schistosomiasis or its increase in some sites requires in-depth studies.

This document describes the theoretical basis of the algorithms used to determine properties of snow and ice from the measurements of the Ocean and Land Color Instrument (OLCI) onboard Sentinel-3 satellites within the Pre-operational Sentinel-3 snow and ice products (SICE) project: http://snow.geus.dk/. The code used for the SICE retrieval and its documentation can be found at https://github.com/GEUS-SICE/pySICE. The algorithms were developed after the work from Kokhanovsky et al. (2018, 2019, 2020).

Advanced-Differential Interferometric SAR (A-DInSAR) has been used to monitor surface deformations in open pit mines and tailings dams. In this paper, ground deformations have been detected on the area of the tailings Dam-I at the Córrego do Feijão Mine (Brumadinho, Brazil) before its catastrophic failure occurred on 25 January 2019. Two techniques optimized for different scattering models, SBAS (Small BAseline Subset) and PSI (Persistent Scatterer Interferometry), were used to perform the analysis based on 26 Sentinel-1B images in IW mode, acquired on descending orbits from 03 March 2018 to 22 January 2019. A WorldDEM DSM product was used to remove the topographic phase component. The results provided by both techniques showed a synoptic and informative view of the deformation process affecting the study area, with a detection of persistent trend of deformations on the top, middle and bottom sectors of the dam face until its collapse, as well as the expected natural settlements on the tailings. It is worth noting the detection of an acceleration in the displacement time-series for a short period near the failure. The maximum accumulated displacements detected along the downstream slope face were -39 mm (SBAS) and -48 mm (PSI). It is reasonable to consider that Sentinel-1 would provide decision makers complementary motion information to the in-situ monitoring system for risk assessment and for a better understanding of on-going instability phenomena affecting the tailings dam.

Knowledge of the spatio-temporal occurrence of avalanche activity is critical for avalanche forecasting and hazard mapping. We present a near-real time automatic avalanche monitoring system that outputs detected avalanche polygons within roughly 10 min after Sentinel- 1 SAR data download. Our avalanche detection algorithm has an average probability of detection of 67.2 % with a false alarm rate averaging 45.9, with maximum POD's over 85 % and minimum FAR's of 24.9 % compared to manual detection of avalanches. The high variability in performance stems from the dynamic nature of snow in the Sentinel-1 data. After tuning parameters of the detection algorithm, we processed five years of Sentinel-1 images acquired over a 150 x 100 km large area in Northern Norway, with the best setup. Compared to a dataset of field-observed avalanches, 77.3 % were manually detectable. Using these manual detections as benchmark, the avalanche detection algorithm achieved an accuracy of 79 % with high POD's in cases of medium to large wet snow avalanches. For the first time, we can present a dataset of spatiotemporal avalanche activity over several winters from a large region. This unique dataset allows for research into the relationship between avalanche activity and triggering meteorological factors, mapping of avalanche prone areas and near-real time avalanche activity monitoring to assist public avalanche forecasting. Currently, the Norwegian Avalanche Warning Service is using our processing system for pre-operational use in three regions in Norway.

Remote sensing (RS) has been widely adopted as a tool to investigate several biotic and abiotic factors, directly and indirectly, related to biodiversity conservation. European grasslands are one of the most biodiverse habitats in Europe. Most of these habitats are subject to priority conservation measure, and they are threatened by several human induced process. The broad expansions of few dominant species are widely reported as drivers of biodiversity loss. In this context, using Sentinel-2 (S2) images, we investigate the distribution of one of the most spreading species: <i>Brachypodium genuense</i>. We performed a binary Random Forest (RF) classification of <i>B. genuense</i> using a RS image and field sampled presence/absence points. Then, we integrate the occurrences obtained from RS classification into niche models to identify the topographic drivers of <i>B. genuense</i> distribution. Lastly, the impact of <i>B. genuense</i> distribution in the N2k habitats was assessed by overlay analysis. The RF classification process detected <i>B. genuense</i>'s cover with an overall accuracy of 91.18%. The integration of RS and topographic niche models shows that the most relevant topographic variables that influence the distribution of <i>B. genuense</i> are slope, elevation, solar radiation and Topographic Wet Index (TWI) in order of importance. The overlay analysis shows that 74.04% of the <i>B. genuense</i> identified in the study area falls on the semi-natural dry grasslands. The study highlights the importance of the RS classification and the topographic niche models as an integrated approach for mapping a broad-expansion species such as <i>B. genuense</i>. The coupled techniques presented in this work should be applicable to other plant communities with remotely recognizable characteristics for more effective management of N2k habitats.

Tidal inlets with attached sand spits are a very common coastal morphology. Since the evolution of the sand spits along the coastline have greatly affected on the social-economic development of local coastal areas. However, previous studies mainly focused on the sand spits which are usually in the scales of hundred meters in width. Therefore, in this study, morphological change of a smaller and unexplored sand spit located in the west coast of Phu Quoc Island, will be investigated. It was found that there is a seasonal variation in the evolution of the sand spit at Song Tranh Inlet. The Longshore sediment transport rates (LSTR) along the spit are in the order from 104 to 105 m3/year. LSTRs of fourteen inlets in the literature were reviewed and the LSTRs at Song Tranh Inlet are higher than half of the LSTRs along the fourteen reviewed inlets. This study aims at contrib-uting to the growing literature on sand spit morphological changes as well as the sustainable coastal management for Phu Quoc Island which is well known as the Pearl Island of Vietnam.

Crop yield data is critical for managing sustainable agriculture and assessing national food security. Current study aims to increase Peanut productivity from current levels by analyzing the yield gap of production potential between theoretical yield and actual farmers’ yields. The spatial yield gap of Peanut for Thiruvannamalai district of Tamil Nadu is examined in this paper by integrating the products of microwave remote sensing (SAR Sentinel-1A) with DSSAT CROPGRO peanut simulation model. CROPGRO Peanut model was calibrated and validated by conducting field experiment at Oilseeds Research Station, Tindivanam during Rabi 2019 for predominant cultivars viz. TMV 7, TMV 13, VRI 2 and G 7. Actual attainable yield was recorded by organizing CCE with help of Department of Agriculture Economics and Statistics in the respective monitoring Villages. Regression analysis between maximum recorded DSSAT Leaf Area Index (LAI) at peak flowering stage of peanut and yield recorded by Crop Cutting Experiment (CCE) for spatial yield estimation of Peanut in Thiruvannamalai district of Tamil Nadu during Rabi 2021 was carried out using ArcGIS 10.6 software. The results showed that the simulated potential yield ranged from 3194 to 4843 kg/ha, whereas actual yield ranged from 1228 to 3106 kg/ha, with a considerable disparity between the actual and potential yield levels (1217 to 2346 kg/ha) of the monitored locations. The minimum, maximum and average yield gaps in Peanut for Thiruvannamalai district was assessed as 1890, 2324 and 2134 kg/ha, respectively. To reduce the production difference (Yield gap) of Peanut cultivation, farmers should focus more on management issues such as time of sowing, irrigation or water management, quantity and sources of nutrients, cultivar selection and availability of quality seeds tailored to each region.

Soil salinity is a severe soil degradation problem mainly faced in arid and semi-arid regions. About 11 million ha of land in the arid, semi-arid, and desert parts of Ethiopia is salt-affected, especially in the Awash River basin, including Afambo irrigated area. Remote sensing approaches are significant tools for accurately predicting and modeling accurately predicting and modeling soil salinity in various world regions. This study aims to analyze and model soil salinity status in the case of Afambo irrigated areas using Landsat-8 and sentinel-2A, Afar region, Ethiopia, by applying remote sensing with field measurements. Thirty-two soil samples were collected from the topsoil (0-30 cm); out of these, 25 soil samples with various EC ranges were selected for modeling, and the remaining 7 samples were utilized to validate the model. Landsat-8 and Sentinel-2A images acquired in the same month were used to extract soil salinity indices. Linear regression analyses correlated the EC data with corresponding soil salinity spectral index values derived from satellite images. The best-performing model was selected for salinity mapping. The soil salinity indices extracted from both Landsat-8 and Sentinel-2A bands estimated soil salinity with high acceptable accuracy of R² values of SI, 0.78 and 0.81, respectively. The model results in three salinity classes with varying degree of salinity, namely, highly saline, moderately saline, and slightly saline, which covers 15.1%, 39.8% and 45.1% of the total area for Landsat-8, respectively and 26.1%, 32%, and 41.9% for sentinel 2A, respectively. Generally, the results revealed that the expansion rate of salt-affected soils has been increasing. From this study, it is possible to infer that if the present irrigation practice continues, it is expected that total the cultivated lands will become sterile within a short period. Thus, it needs to be monitored regularly to secure up-to-date knowledge of their extent to improve management practices and take appropriate actions.

Environmental effects and climate change are lately representing an increasing strain of the coastal areas which topography strongly depends on these conditions. However, the processes by which weather and environmental phenomena influence the highly variable beach morphology are still unknown. A continuous monitoring of the beach environment is necessary to implement protection strategies. This paper presents the results of an innovative study performed on a coastal area using satellite remote sensing data with the aim of understanding how environmental phenomena affect beaches. Two-years of synthetic aperture radar (SAR) Sentinel-1 images are used over a test area in Noordwijk, the Netherlands. At the same time as the SAR acquisitions, information on tidal and weather conditions are collected and integrated from nearby meteorological stations. Dedicated codes are implemented in order to understand the relationship between the SAR amplitude and the considered phenomena: wind, precipitation, tidal conditions. Surface roughness is taken into account. The results indicate a strong correlation between the amplitude and the wind. No particular correlation or trend could be noticed in the relation with the precipitation. The analysis of the amplitude also shows a decreasing trend moving from the dry area of the beach towards the sea and the correlation coefficient between the amplitude and the tide level gets negative with the increase of the water content.

Satellite altimeters have been used to monitor river and reservoir water levels, from which water storage estimates can be derived. Inland water altimetry can therefore play an important role in continental water resource management. Traditionally, satellite altimeters were designed to monitor homogeneous surfaces such as oceans or ice sheets, resulting in a poor performance over small inland water bodies due to the contribution from land contamination in the returned waveforms. The advent of synthetic aperture radar (SAR) altimetry (with its improved along-track spatial resolution) has enabled the measurement of inland water levels with a better accuracy and an increased spatial resolution. This paper presents three specialized algorithms or retrackers to retrieve water levels from SAR altimeter data over inland water bodies dedicated to minimizing land contamination from the waveforms. The performances of the proposed waveform portion selection method with three retrackers, namely, the threshold retracker, Offset Centre of Gravity (OCOG) retracker and 2-step physical-based retracker, are compared. Time series of water levels are retrieved for water bodies in the Ebro River basin (Spain). The results show good agreement with in situ measurements from the Ebro Reservoir (width is approximately 1.8 km) and Ribarroja Reservoir (width is approximately 400 m) with un-biased root-mean-square errors (RMSEs) of approximately 0.28 m and 0.16 m, respectively. The performances of all three retrackers are also compared with the European Space Agency’s ocean retracker in the Sentinel-3 Level-2 product.

This research is related to the eco-hydrological problems of herbaceous wetland drying and biodiversity loss in the floodplain lakes of the Middle Basin of the Biebrza river (Poland). An experiment was set up, whose main goals were: (i) mapping the vegetation types and the temporarily or permanently flooded areas, and (ii) comparing the usefulness of C-band Sentinel-1A (S1A) and X-band TerraSAR-X/TanDEM-X (TSX/TDX) for mapping purposes. The S1A imagery was acquired on a regular basis using the dual polarization VV/VH and the Interferometric Wide Swath Mode. The TSX/TDX data were acquired in quad-pol, a fully polarimetric mode, during the Science Phase. The paper addresses the following aspects: i) wetland mapping with S1A multi-temporal series; ii) wetland mapping with fully polarimetric TSX/TDX data; iii) comparing the wetland mapping using dual polarization TSX/TDX subsets, i.e. HH-HV, HH-VV and VV-VH; iv) comparing wetland mapping using S1A and TSX/TDX data based on the same polarization (VV-VH); v) studying the suitability of the Shannon Entropy for wetland mapping; and vi) assessing the contribution of interferometric coherence for wetland classification. The experimental results show main limitations of the S1A dataset, while they highlight the good accuracy that can be achieved using the TSX/TDX data, especially those taken in fully polarimetric mode.

Consistent calibration and monitoring is a basic prerequisite for providing reliable time series of global and regional sea level variations from altimetry. The precision of sea level measurements and regional biases for six altimeter missions (Jason-1/2/3, Envisat, Saral, Sentinel-3A) is assessed at eleven GNSS-controlled tide gauge stations in the German Bight (SE North Sea) for the period 2002 to 2019. The gauges are partly located at the open water, partly at the coast close to mudflats. The altimetry is extracted at virtual stations with distances from 2 to 24 km from the gauges. The processing is optimized for the region and adjusted for the comparison with instantaneous tide gauges readings. An empirical correction is developed to account for mean height gradients and slight differences of the tidal dynamics between gauge and altimetry which improves the agreement between the two data sets by 15-75%. The precision of the altimeters is depending on location and mission and is shown to be at least 1.8 to 3.7 cm based on an assumed precision of 2 cm for the gauges. The accuracy of the regional mission biases is strongly dependent on the mean sea surface heights near the stations. The most consistent biases are obtained based on the CLS2011 model with mission dependent accuracies from 1.3 to 3.4 cm. Hence, the GNSS-controlled tide gauges operated operationally by WSV might complement the calibration and monitoring activities at dedicated CalVal stations.

Estimating Forest growing stock volume (GSV) is crucial for forest growth and resource management, as it reflects forest productivity. National measurements are laborious and costly, however integrating satellite data such as optical, Synthetic Aperture Radar (SAR), and Airborne Laser Scanning (ALS) with National Forest Inventory (NFI) data and machine learning (ML) methods has transformed forest management. In this study, Random Forest (RF), Support Vector Regression (SVR), and Extreme Gradient Boosting (XGBoost) were used to predict GSV using Estonian NFI data, Sentinel-2 imagery, and ALS point cloud data. Four variable combinations were tested: CO1 (vegetation indices and LiDAR), CO2 (vegetation indices and individual band reflectance), CO3 (LiDAR and individual band reflectance), and CO4 (a combination of vegetation indices, individual band reflectance, and LiDAR). Across Estonia's geographical regions, RF consistently delivered the best performance. In the northwest (NW), RF achieved an R² of 0.63 and an RMSE of 125.39 m³/plot. In the southwest (SW), it achieved an R² of 0.73 and an RMSE of 128.86 m³/plot. In the northeast (NE), RF achieved an R² of 0.64 and an RMSE of 133.77 m³/plot, and an R² of 0.70 and an RMSE of 120.72 m³/plot was achieved in the southeast (SE). These results underscore RF's precision in predicting GSV across diverse environments, though refining variable selection and improving tree species data could further enhance accuracy.

Satellite-based data classification performance remains a challenge for research community in the field of land use/land cover mapping. Here we investigated supervised per-pixel classifications performance under different scenarios, based on single and seasonal multispectral data combi-nations of different sensors (Landsat-8 OLI and Sentinel-2 MSI). In case of Landsat, seasonal spectral indices (EVI and NDMI) were included. A typical Mediterranean watershed with a complex landscape comprised of various forest and wetland ecosystems, crops, artificial surfaces, and lake water was selected to test our approach. All available geospatial data from national databases (Forest Map, LPIS, Natura2000 habitats, cadastral parcels, etc.) are used as ancillary data for clas-sification training and validation. We examined and compared the performance of ML, RF, KNN and SVM classifiers under different scenarios for land use/land cover mapping, according to Copernicus Land Cover (CLC2018) nomenclature. In total, eight land use/land cover classes were identified in Landsat-8 OLI and nine in Sentinel-2a MSI for an acceptable overall accuracy over 85%. A comparison of the overall classification accuracies shows that Sentinel-2a overall accuracy was slightly higher than Landsat-8 (96.68% vs. 93.02%). Respectively, the best-performed algorithm was ML in Sentinel-2 while in Landsat-8 was KNN. However, machine-learning algorithms have similar results regardless the type of sensor. We concluded that best classification performances achieved using seasonal multispectral data. Future research should be oriented towards inte-grating time-series multispectral data of different sensors and geospatial ancillary data for land use/land cover mapping.

The study put forward a data fusion approach for urban remote sensing that combines SAR (Synthetic Aperture Radar) and optical satellite data. By integrating datasets from different sensors and spatial-temporal scales, the technique aims to extract more accurate information. The fusion approach utilizes two methods: feature-based fusion, where relevant features are extracted and fused, and simple layer stacking (SLS), where the original datasets are directly stacked as multiple layers. This study extracted features using SAR textures (using Sentinel-1) and modified indices (using Landsat-8), and then classified these features using an XGBoost algorithm implemented in Python and Google Earth Engine. Researchers examined five cities, each representing a distinct climatic zone and urban dynamic: Cape Town, Guangzhou, Los Angeles, Mumbai, and Osaka. An accuracy assessment was conducted using random validation points, achieving an overall accuracy of 89.5% using the proposed MSFI method. A comparison was also performed with three well-known global products. The proposed approach, outperformed all three global products achived 89% accuracy while ESA (84%), ESRI (81%) and Dynamic World (82%). Additionally, Land surface temperature analysis was accomplished to investigate the relationship between extracted UIS and Land Surface Temperature (LST) across selected cities to show the practical use of proposed MSFI method. Los Angeles, a warm temperate city, showed the highest LST among all five cities. The datasets, along with the GEE and Python codes, are available at https://github.com/mnasarahmad/sls.

The Sentinel-1 SAR Extra Wide swath mode with its 40 meters pixel size allows accurate lead mapping in Arctic sea ice areas. We present an improved winter lead detection algorithm based on a modified U-Net convolutional neural network. We introduce a preprocessing procedure that balances normalized radar cross section (NRCS) values between sub-swaths. This results in more consistent Sentinel-1 SAR images as input for the classifier, which is especially important for the cross-polarization HV channel. In turn, image consistency is essential for automatic image semantic segmentation. We develop a new lead detection algorithm and compare it with a previously published version. We produce pan-Arctic, 40 meters resolution lead maps and present pan-Arctic lead area fraction on a 12 km grid for January 2019. Within different Arctic regions, the lead area fraction is stable and varies only within the expected natural variability during the one month studied here. The average Arctic-wide lead area fraction is 2.44 % with 0.25 % standard deviation during January 2019. The improved lead detection algorithm leads to a better lead discrimination and extends the applicability area to the entire Arctic.

Penile cancer (PeCa) is a rare urological malignancy characterized by significant geographic variations in both incidence and mortality rates. Due to its rarity and the consequent lack of randomized trials, current management is based on retrospective studies and small prospective trials. In addition, the diagnostic pathways and treatment strategies exhibit substantial heterogeneity, differing significantly between less developed and well-developed countries. The prognosis of PeCa is determined by the presence and extent of regional lymph node (LN) involvement. Therefore, early detection and treatment of LN metastasis is paramount to ensure better outcomes. In recent decades, the overall survival for PeCa has increased, mainly due to advancements in imaging techniques and risk stratification. We aim to provide an overview of the current role of PET CT imaging in the management of patients with PeCa.

This paper presents an operational approach for detecting floods and establishing flood extent using Sentinel-1 radar imagery with Google Earth Engine. Flooded areas are identified using a change-detection method based on the normalized difference. The HAND algorithm is used to delineate zones for processing. The approach was tested and calibrated at small scale to identify optimal parameters for flood detection. It was then applied to the whole of the island of Madagascar after the cyclone Batsirai in 2022. The proposed method is enabled by the computing power and data availability of Google Earth Engine and Google Colab. The results show satisfactory accuracy in delineating flooded areas. The advantages of this approach are its rapidity, online availability and ability to detect floods over a wide area. The approach relying on Google tools thus offers an effective solution for generating a large-scale synoptic picture to inform hazard management decision-making. However, one of the method’s drawbacks is that it depends to a large extent on frequent radar imagery being available at the time of flood events and on free access to the platform. These drawbacks will need to be taken into account in an operational scenario.

Modern commercial air travel connects disparate human populations with the global airline industry transporting up to 4.5 billion passengers annually in the years leading up to the COVID-19 pandemic. While such connections are convenient for commerce and tourism, air travel networks can also be efficient distributors of infectious diseases such as influenza, SARS-CoV-1, hemorrhagic fevers, and more recently SARS-CoV-2 and monkeypox. During the COVID-19 pandemic, public health agencies used multi-layered control strategies including pre-departure testing and vaccination requirements, masking, post-arrival testing, and quarantine to manage the risk of COVID-19 transmission associated with air travel. Simultaneously, the surveillance of aircraft wastewater emerged as a promising new data source to screen for SARS-CoV-2 infections, including newly emergent lineages, among international air travelers. Herein, we review the potential of aircraft wastewater for public health surveillance. The known contributing population and flight itinerary combined with the highly concentrated waste stream and convenient sampling during routine lavatory servicing make aircraft wastewater a strategic opportunity for unintrusive surveillance of the global fluxes of human pathogens. We estimate for the cases of fecal- or urine-shed pathogens, sampling from 3,500 and 1,250 flights per week, respectively, would be required to survey 10% of all global long-haul flight passengers. In the case of the United States, achieving 10% coverage of all international arrivals would require sampling from 925 and 322 flights per week, respectively. Aircraft wastewater surveillance could also be integrated with network and infectious disease models to better inform traditional public health control measures during emerging epidemics. Given the tremendous potential for public good and the massive economic costs of epidemics, governments should consider international collaboration to create a global aircraft wastewater surveillance system.

TRPOMI instrument aboard Sentinel-5P is a relatively new, high-resolution source of information about atmosphere composition. One of the primary atmospheric trace gases that we can observe through it is nitrogen dioxide. By now, we were using the chemical weather model (GEM-AQ) as a mean for estimating nitrogen dioxide concentration on a regional scale. Although well established in atmospheric science, the GEM-AQ simulations were always based on emission data, which in the case of the energy sector were reported by stack owners. In this paper, we attempted to compare the TROPOMI and GEM-AQ derived VCDs over Poland with a particular focus on large point emitters. We also checked how cloudy conditions influence TROPOMI results. Finally, we tried to link the NO2 column number densities with surface concentration using boundary layer height as an additional explanatory variable

Sentinel-1 SAR data preprocessing is essential for several earth observation applications, including land cover classification, change detection, vegetation monitoring, urban growth, natural hazards, etc. The information can be extracted from the 2x2 covariance matrix [C2] of Sentinel-1 dual-pol (VV-VH) acquisitions. To generate the covariance matrix from Sentinel-1 single look complex (SLC) data, several preprocessing steps are required. The ESA SNAP S-1 toolbox can be used to preprocess the data to generate a [C2] matrix. The polarimetric analysis in respective application fields often starts with the covariance matrix. However, due to limited availability of Sentinel-1 SLC data preprocessing workflow standards for polarimetric applications in contemporary research methods, downstream applications unable to comply with these workflows directly. In this paper, we propose a couple of generic practices to preprocess Sentinel-1 SLC data in SNAP S-1 toolbox, which would be beneficial for the radar remote sensing user community.

Soil moisture (SM) plays an essential role in environmental studies related to wetlands, an ecosystem sensitive to climate change. Hence, there is the need for its constant monitoring. SAR (Synthetic Aperture Radar) satellite imagery is the only mean to fulfill this objective regardless of the weather. The objective of the study was to develop the methodology for SM retrieval under wetland vegetation using Sentinel-1 (S-1) satellite data. The study was carried out during the years 2015–2017 in the Biebrza Wetlands, situated in northeastern Poland. At the Biebrza Wetlands, two Sentinel-1 validation sites were established, covering grassland and marshland biomes, where a network of 18 stations for soil moisture measurement was deployed. The sites were funded by the European Space Agency (ESA), and the collected measurements are available through the International Soil Moisture Network (ISMN). The NDVI (Normalized Difference Vegetation Index) was derived from the optical imagery of a MODIS (Moderate Resolution Imaging Spectroradiometer) sensor onboard the Terra satellite. The SAR data of the Sentinel-1 satellite with VH (vertical transmit and horizontal receive) and VV (vertical transmit and vertical receive) polarization were applied to soil moisture retrieval for a broad range of NDVI values and soil moisture conditions. The new methodology is based on research into the effect of vegetation on backscatter () changes under different soil moisture and vegetation (NDVI) conditions. It was found that the state of the vegetation may be described by the difference between  VH and  VV, or the ratio of  VV/VH, as calculated from the Sentinel-1 images. The most significant correlation coefficient for soil moisture was found for data that was acquired from the ascending tracks of the Sentinel-1 satellite, characterized by the lowest incidence angle, and SM at a depth of 5 cm. The study demonstrated that the use of the inversion approach, which was applied to the new developed models and includes the derived indices based on S-1, allowed the estimation of SM for peatlands with reasonable accuracy (RMSE ~ 10 vol. %). Due to the temporal frequency of the two S-1 satellites’ (S-1A and S-1B) acquisitions, it is possible to monitor SM changes every six days. The conclusion drawn from the study emphasizes a demand for the derivation of specific soil moisture retrieval algorithms that are suited for wetland ecosystems, where soil moisture is several times higher than in agricultural areas.

Forest above-ground carbon stock (AGCS) is one of the primary ecological evaluation indicators, so it is crucial to estimate AGCS accurately. In this research, we added the climatic and topographic factors to the estimation process by a remote sensing approach to explore their impacts and to achieve more precise estimations. We model and predict AGCS by Random Forest (RF) based on sixty field sample plots of Pinus densata pure forests in southwest of China and the factors extracted from Landsat 8 OLI images (Source I), Sentinel-2A images (Source II), combined Landsat 8 OLI and Sentinel-2A images (Source III). We added the topographic and climatic factors to establish AGCS estimation model and compare the results. The topographic factors contain elevation, slope and aspect. Climatic factors contain mean annual temperature, annual precipitation, annual potential evapotranspiration and monthly mean potential evapotranspiration. It was found that the model based on Source III was better than Source I and Source II. Among the models without adding factors, the model based on Source III worked the best, with an R2 of 0.87, an RMSE of 10.81 t/ha, an rRMSE of 23.19%, and a P of 79.71%. Among the models that added topographic factors, the model based on Source III worked best after adding elevation, with an R2 of 0.89, an RMSE of 10.01 t/ha, an rRMSE of 21.47%, and a P of 82.17%. Among the models that added climatic factors, the model that was added the annual precipitation factor had the best modeling result, with an R2 of 0.90, an RMSE of 9.53 t/ha, an rRMSE of 20.59%, and a P of 83.00%. The prediction result exhibited that the AGCS of the Pinus densata forest in 2021 was 9,737,487.52 t. The combination of Landsat 8 OLI and sentinel-2A could improve the prediction accuracy of AGCS. The addition of annual precipitation can effectively improve the accuracy of AGCS estimation. Higher resolution of climate data is needed to enhance the modeling in the future work.