Advanced machine learning algorithms, have the potential to be successfully applied to many areas of system modelling. In the present study the capability of ten machine learning algorithms in predicting the structural damage of an 8-storey reinforced concrete frame building subjected to single and successive ground motions is examined. From this point of view, the initial damage state of the structural system, as well as 16 well known ground motion intensity measures are adopted as the features of the machine-learning algorithms that aim to predict the structural damage after each seismic event. The structural analyses are performed considering both real and artificial mainshock–aftershock sequences, while the structural damage is expressed in terms of two overall damage indices. The comparative study results in the most efficient damage index, as well as the most promising machine learning algorithm in predicting the structural response of a reinforced concrete building under single or multiple seismic events. Finally, the configured methodology deployed in a user-friendly web-application.

HIV-associated neurocognitive disorder (HAND) is an array of neurocognitive changes associated with HIV infection, and the roles of microRNAs in HAND are not completely revealed yet. Based on published data and publicly available databases, we constructed an integrated miRNA-mRNA network involved in HAND. Bioinformatics analyses, including gene ontology, network analysis, and KEGG pathway analysis, were applied for further study of the network and the genes of the network. The axon guidance KEGG pathway, three genes NTNG1, EFNB2, CXCL12, and 17 miRNAs which regulates them, are spotlighted in our study. This study provides new perspectives to the knowledge of miRNAs’ roles in the process of HAND, and our findings provided potential therapeutic targets and clues of HAND.

Management approaches inspired by the variability of natural disturbances are expected to produce forests in the future that will be significantly more resilient and better adapted to local environmental conditions. Due to climate change, windstorms are becoming increasingly common resulting in the destruction not only of extensive forest areas but, quite often, of small-sized and scattered forest lands that can ultimately become home to insects and disease dissemination sites. In the present study, an attempt is made to identify and record areas in the northeastern forests of Greece covered by mixed stands of conifers and broadleaves that experienced massive windthrow following local storms. Based on tree-level data, local topographic features, forest characteristics and the mechanical properties of green wood, a reliable model, to be used for the prediction of similar disturbances in the future, has been created after a thorough comparative study of the most well-known intelligent machine learning algorithms.

Selected glasses with 10 Na₂O + (90-x) P₂O₅ + x BCD where bypass cement dust (BCD) x value =10, 20, 30 in mol% were synthesized by recognizable melting annealing technique. Cooperative characterization of the prepared glasses were carried out through FTIR and SEM analysis before and after immersed in simulated body fluid (SBF) solution for 13 and 23 days at 37 ^oC. After immersion in SBF, apatite layer is produced on the glass surface after 13 day and increase after 23 day, showing good bioactivity after immersion in the SBF especially for bioglass sample with 30% BCD. A porous hydroxy apatite layer produced on the surface of SBF-glass composite and this layer became denser after more soaking time, periods were extended from 13 to 23 days. Atomic absorption spectroscopy explained the early period of soaking that cause release of both Si and Ca ions through the glass beside decreasing of phosphrous ions. Bioglass (BCD-30) is studied as shielding for gamma, protons and alphas by using Phy-X software, SRIM Monte Carlo simulation code and its subroutine TRIM. The gamma shielding parameters, mass stopping power (MSP), range for both proton (H- ions) and alpha (He- ions) in bioglass- BCD-30 and human bone tissue have estimated. Also, comparison between them is calculated in predicting the radiation damage and atomic displacements per atom (dpa).

Critical infrastructures are those that are essential. For this type of infrastructure, it is necessary to implement analytical methodologies that will allow us to quickly obtain the susceptibility or resilience and possible damage generated in extreme precipitation episodes, through a holistic perspective in which the factors linked to hydrological risk intervene. In particular, urban hydraulic infrastructures are analyzed considering the degree of criticality, defined as the number of interactions on the different activities of the population. For this purpose, a hydrological risk analysis methodology is required. This methodology is focused on an integral approach of the system indicators to be analyzed and linked to the hydrological threat. This work proposes to delimit and analyze those factors that involve risk using an analytical expression. This model will estimate the damage to these infrastructures breaking down the factors involved in the risk equation and analyzing their variability according to the intrinsic characteristics linked to them as well as the interaction with external factors.

Damage detection based on modal parameter changes becomes popular in the last decades. Nowadays are available robust and reliable mathematical relations to predict the natural frequency changes if damage parameters are known. Using these relations, it is possible to create databases containing a large variety of damage scenarios. Damage can be thus assessed by applying an inverse method. The problem is the complexity of the database, especially for structures with more cracks. In this paper, we propose two machine learning methods, namely the random forest (RF) and the artificial neural network (ANN) as search tools. The databases we developed contain damage scenarios for a prismatic cantilever beam with one crack and ideal and non-ideal boundary conditions. The crack assessment is made in two steps. First, a coarse damage location is found from the networks trained for scenarios comprising the whole beam. Afterward, the assessment is made involving a particular network trained for the segment of the beam on which the crack is previously found. Using the two machine learning methods, we succeed to estimate the crack location and severity with high accuracy for both simulation and laboratory experiments. Regarding the location of the crack, which is the main goal of the practitioners, the errors are less than 0.6%. Based on these achievements, we concluded that the damage assessment we propose, in conjunction with the machine learning methods, is robust and reliable.

Current bridge inspection practices rely on paper-based data acquisition, digitization, and multiple conversions in between incompatible formats to facilitate data exchange. This practice is time-consuming, error-prone, cumbersome, and leads to information loss. One aim for future inspection procedures is to have a fully digitized workflow that achieves loss-free data exchange, which lowers costs and offers higher efficiency. On the one hand, existing studies proposed methods to automatize data acquisition and visualization for inspections. These studies lack an open standard to make the gathered data available for other processes. On the other hand, several studies discuss data structures for exchanging damage information through out different stakeholders. However, those studies do not cover the process of automatic data acquisition and transfer. This study focused on a framework that incorporates automatic damage data acquisition, transfer, and a damage information model for data exchange. This enables inspectors to use damage data for subsequent analyses and simulations. The proposed framework shows the potentials for a comprehensive damage information model and related (semi-)automatic data acquisition and processing.

Epidemiology of Hymenopteran-related deaths in Europe due to bee, wasp and hornet stings (Cause Code of Death: X23) based on official registers from WHO Mortality Database is described. Over a 23-year period (1994-2016), a total of 1,691 fatalities were officially recorded, mostly occurring in Western (42.8%) and Eastern (31.9%) Europe. The victims tended to concentrate in: Germany (n=327; 1998-2015), France (n=211; 2000-2014) and Romania (n=149; 1999-2016). The majority of deaths occurred in males (78.1%), within the age group of 25-64 years (66.7%), and in an “unspecified place” (44.2%). The X23 gender ratio (X23GR) of mortality varied from a minimum of 1.4 for Norway to a maximum of 20 for Slovenia. The highest X23MR, expressed in terms of annual rates and per million inhabitants, were recorded in countries from Eastern Europe (0.35) followed by Western (0.28), Northern (0.23) and Southern Europe (0.2). The countries with the highest and lowest mean X23MR were Estonia (0.61), Austria (0.6) and Slovenia (0.55); and Ireland (0.05), United Kingdom (0.06) and the Netherlands (0.06), respectively. Country-by-country data show that the incidence of insect-sting mortality is statistically low, but not negligible.

Rapid post-earthquake damage diagnosis of bridges can guide decision-making for emergency response management and recovery. This can be facilitated using digital technologies to remove the barriers of manual post-event inspections. Prior mechanics-based Finite Element (FE) models can be used for post-event response simulation using the measured ground motions at nearby stations; however, the damage assessment outcomes would suffer from uncertainties in structural and soil material properties, input excitations, etc. For instrumented bridges, these uncertainties can be reduced by integrating sensory data with prior models through a model updating approach. This study presents a sequential Bayesian model updating technique, through which a linear/nonlinear FE model, including soil-structure interaction effects, and the foundation input motions are jointly identified from measured acceleration responses. The efficacy of the presented model updating technique is first examined through a numerical verification study. Then, seismic data recorded from the San Rogue Canyon Bridge in California are used for a real-world case study. Comparison between the free-field and the foundation input motions reveals valuable information regarding the soil-structure interaction effects at the bridge site. Moreover, the reasonable agreement between the recorded and estimated bridge responses shows the potentials of the presented model updating technique for real-world applications. The updated FE model is considered as the digital twin of the bridge and can be used to analyze the bridge and monitor the structural response at element, section, and fiber levels to diagnose the location and severity of any potential damage mechanism.

The genetic pool of valuable old ornamental cultivars and their in situ maintenance may be threated by climate change. Meanwhile, the ornamental plants like roses make up an important share of both gardens and urban green spaces, where they are particularly vulnerable to multistress growth conditions. The aim of this research was to evaluate the effect of changing climatic conditions on growth and flowering of 11 historic climber roses through long-term studies (2000-2017) conducted in Central Europe. The evaluation of plants consisted of assessment of frost damage and the timing of early phenological stages (starting of bud break, leaf unfolding) as well as gathering data on beginning, fullness and end of flowering and its abundance. Frost damage was not recorded in any year only in ‘Mme Plantier’, and did not occur for any cultivar after the winter in the years 2007, 2008, and 2014. Only a little damage to one-year shoots was recorded after the winter in the years 2015-2017. Frost damage to ‘Alberic Barbier’, ‘Albertine’, ‘Chaplin's Pink Climber’, ‘Orange Triumph clg’ and ‘Venusta Pendula’ led to pruning to ground level in every year excluding those listed above. Frost damage of once blooming roses limited their flowering; however, the many-year data-sets showed a trend for decreased frost damage and improved abundance of flowering, and these results can be interpreted as a response to the increase of average air temperature. The timing of bud breaking and leaf development in all climber roses was strictly correlated with average air temperature in the dormancy period. The reactions of climber roses to weather conditions confirmed the influence of climatic changes on ornamental crop plants in Central Europe, introducing the potential possibility for the wider application of climber roses, but without certainty of flowering every year.

The fatty acid elongase ELOngation of Very-Long-chain fatty acids protein 2 (ELOVL2) controls the elongation of polyunsaturated fatty acids (PUFA) producing precursors for omega-3, do-cosahexaenoic acid (DHA), and omega-6, docosapentaenoic acid (DPAn6) in-vivo. Expectedly, Elovl2-ablation drastically reduced the DHA and DPAn6 in liver mitochondrial membranes. Unexpectedly, however, total PUFAs levels decreased further than could be explained by Elovl2 ablation. The lipid peroxidation process was not involved in PUFAs reduction since malondial-dehyde-lysine (MDAL) and other oxidative stress biomarkers were not enhanced. The content of mitochondrial respiratory chain proteins remained unchanged. Still, membrane remodeling was associated with high voltage-dependent anion channel (VDAC) and adenine nucleotide trans-locase 2 (ANT2), a possible reflection of the increased demand on phospholipid transport to the mitochondria. Mitochondrial function was impaired despite preserved content of the respiratory chain proteins and the absence of oxidative damage. Oligomycin-insensitive oxygen consumption increased, and coefficients of respiratory control were reduced by 50%. The mitochondria became very sensitive to fatty acid-induced uncoupling and permeabilization, where ANT2 is involved. Mitochondrial volume and number of peroxisomes increased as revealed by transmission elec-tron microscopy. In conclusion, the results imply that endogenous DHA production is vital for the normal function of mouse liver mitochondria and could be relevant not only for mice but also for human metabolism.

The work is devoted to the study of the mechanisms of damage accumulation in a polymer composite material (PCM) during fatigue loading. Mechanical testing of a fiberglass sample was carried out by cyclic tension accompanied by registration of acoustic emission (AE). For the recorded AE signals, the Fourier spectra were calculated and used for clustering with Kohonen self-organizing map. Relations between clusters and types of damage in the PCM structure were established. The analysis of the peak frequencies of the Daubechies D14-wavelet components of AE signals was carried out. Obtained results has allows one to describe the processes of destruction in the PCM sample. It has been established that, on the base of local formation of microdamages in the matrix and the fracture of the fibers detected during recording of the AE data, it is possible to predict the destruction of the polymer composite material, while the beginning of a material destruction can be registered if the damage identified as an adhesion failure is observed. Perspectives of application of adaptive fiber-optic AE sensors for structural monitoring of PCMs on the base of preliminary experimental results are considered and discussed.

Fixed offshore wind turbines continue to be developed for high latitude areas where not only wind and wave loads need to be considered, but also moving sea ice. Current rules and regulations for the design of fixed offshore structures in ice-covered waters do not adequately consider effects of ice loading and its stochastic nature on fatigue life of the structure. Ice crushing on such structures results in ice-induced vibrations, which can be represented by loading the structure using a variable-amplitude loading (VAL) sequence. Typical offshore load spectra are developed for wave and wind loading. Thus, a combined VAL spectrum is developed for wind, wave, and ice action. To this goal, numerical models are used to simulate the dynamic ice-, wind-, and wave-structure interaction. The stress time-history at an exemplarily selected critical point in an offshore wind energy monopile support structure is extracted from the model and translated into a VAL sequence, which can then be used as a loading sequence for the fatigue assessment or fatigue testing of welded joints of offshore wind turbine support structures. This study presents the approach to determine combined load spectra and standardized time series for wind, wave, and ice action.

The angle of seismic excitation is a significant factor of the seismic response of RC buildings. The procedure required for the calculation of the angle for which the potential seismic damage is maximized (critical angle) contains multiple nonlinear time history analyses using in each one of them different angles of incidence. Moreover, the seismic codes recommend the application of more than one accelerograms for the evaluation of seismic response. Thus, the whole procedure becomes time consuming. Herein, a method to reduce the time required for the estimation of the critical angle based on Multilayered Feedforward Perceptron Neural Networks is proposed. The basic idea is the detection of cases in which the critical angle increases the class of seismic damage compared to the class which arises from the application of the seismic motion along the buildings’ structural axes. To this end, the problem is expressed and solved as Pattern Recognition problem. As inputs of networks the ratios of seismic parameters’ values along the two horizontal seismic records' components, as well as appropriately chosen structural parameters, were used. The results of analyses show that the neural networks can reliably detect the cases in which the calculation of the critical angle is essential.

Nonlinear catastrophes caused by geological fluids are a fundamental issue in rock mechanics and the geoengineering hazard field. For the consideration of hydrodynamic force on red-bed mudstone softening damage, X-ray visualization test on the fissure flow in mudstone block failure under hydrodynamic force was performed in this study based on block scale and the physical phenomena of fissure seepage and nonlinear diffusion were further explored. A new method for evaluating the hydro-damage degrees of rocks using an X-ray image analysis was proposed, and the quantitative relation of diffusion coefficients of hydro-damage and seepage was established. The research results revealed that the hydrodynamic force promoted the fluid-filled fissure behavior in mudstone specimen failure. Also, the seepage and diffusion phenomena of fluid in rocks during failures were indicated using X-ray imaging. A dual mechanical behavior was presented in the nonlinear seepage and abnormal diffusion of a red mudstone geological body under hydrodynamic conditions. The damaged degree of mudstone was aggravated by the effect of hydrodynamic force, and the initial seepage–diffusion coefficient with respect to lower hydro-damage was larger than the final seepage–diffusion coefficient with respect to higher hydro-damage of rocks with a decreasing nonlinear trend.

Magnetorheological processing was applied to polish the working surfaces of the ZnGeP2 single crystal, in which a non-aqueous liquid with magnetic particles of carbonyl iron with the addition of nanodiamonds was used. Samples of a single crystal ZnGeP2 with an angstrom level of surface roughness were received. the use of MRP has allowed more accurately characterizing possible structural defects that have emerged on the surface of a single crystal and have a size of ~ 0.5-1.5 μm. the LIDT value at the indicated or-ders of magnitude of the surface roughness parameters is determined not by the quality of polishing, but by the number of point depressions caused by physical limitations of the structural configuration of the crystal volume. These results are in good agreement with the assumption made about a significant effect of the concentration of dislocations in a ZnGeP2 crystal on LIDT.

Wernicke-Korsakoff syndrome (WKS) is induced by thiamine deficiency (TD) and mainly related to alcohol consumption. Frontal cortex dysfunction has been associated to impulsivity and disinhibition in WKS patients. The pathophysiology involves oxidative stress, excitotoxicity and inflammatory responses leading to neuronal death, but the relative contributions of each factor (alcohol and TD, isolate or in interaction) to these phenomena are still poorly understood. A rat model was used by forced consumption of 20% (w/v) alcohol for 9 months (CA), TD hit (TD diet + pyrithiamine 0.25 mg/kg, i.p. daily injections the last 12 days of experimentation; TDD), and both combined treatments (CA+TDD). Motor and cognitive performance and cortical damage were examined. CA caused hyperlocomotion as a possible sensitization of ethanol-induced excitatory effects and recognition memory deficits. In addition, CA+TDD animals showed a disinhibited-like behavior, which appears to be dependent on TDD. Also, combined treatment led to more pronounced alterations in nitrosative stress, lipid peroxidation, apoptosis and cell damage markers. Correlations between injury signals and disinhibition suggest that CA+TDD disrupts behaviors dependent on the frontal cortex. Our study sheds light on the potential disease-specific mechanisms, reinforcing the need for neuroprotective therapeutic approaches along with preventive treatments for the nutritional deficiency in WKS.

This study investigated and classified typical structures in rural village and analyzed the vulnerability of various typical types of structures. Based on the statistics of earthquake damages with magnitudes above 5 from 1996 to 2013 in China, the damage matrixes of different types of structures in rural village are obtained. And The vulnerability index and the vulnerability equation of structure are crucial to assess the earthquake losses of typical structures under different magnitudes earthquakes. According to the seismic loss of different types of structures under different earthquake magnitudes, there are possible to improve the seismic resilience of the buildings in rural village. Moreover, the regional vulnerability is analyzed by β probability distribution function, and the comprehensive seismic performance index of different types of agricultural buildings in the region is obtained. The main research is to predict the loss of different types of structures under different earthquake magnitudes in the future, and to provide technical support for different types of building in rural village reinforcement.

Epithelial-mesenchymal transition (EMT) networks are essential in acquiring the drug resistance and cancer malignant features in cancer stem cells (CSCs). In this regard, gene expression profiles in diffuse- and intestinal-type gastric cancer (GC) have been analyzed to reveal the network pathways in EMT and CSCs, since the diffuse-type GC has much more mesenchymal features than intestinal-type GC that has the intestinal features. The study results revealed that the activation state of several canonical pathways related to cell cycle regulation was altered. The canonical pathway on Cell cycle: G1/S checkpoint regulation was activated in diffuse-type GC, and canonical pathways on Cell cycle control of chromosomal replication and Cyclins and cell cycle regulation were activated in intestinal-type GC. Canonical pathway related to Role of BRCA1 in DNA damage response was activated in intestinal-type GC, where BRCA1, which is related to G1/S phase transition was up-regulated in intestinal-type GC. Several microRNAs (miRNAs), including mir-10, mir-17, mir-19, mir-194, mir-224, mir-25, mir-34, mir-451, and mir-605, were identified to have direct relationships of RNA-RNA interaction in Cell cycle: G1/S checkpoint regulation pathway. Additionally, cell cycle regulation may be altered in EMT conditions. The alterations in activation states of the pathways related to cell cycle regulation in diffuse- and intestinal-type GC would indicate the significance of cell cycle regulation in EMT.

Earthquakes are one of the most catastrophic natural phenomena. After an earthquake, earthquake reconnaissance enables effective recovery by collecting building damage data and other impacts. This paper aims to identify state-of-the-art data sources for building damage assessment and provide guidance for more efficient data collection. We have reviewed 38 articles that indicate the sources used by different authors to collect data related to damage and post-disaster recovery progress after earthquakes between 2014 and 2021. The current data collection methods have been grouped into seven categories: fieldwork or ground surveys, omnidirectional imagery (OD), terrestrial laser scanning (TLS), remote sensing (RS), crowdsourcing platforms, social media (SM) and closed-circuit television videos (CCTV). The selection of a particular data source or collection technique for earthquake reconnaissance includes different criteria depending on what questions are to be answered by this data. We conclude that modern reconnaissance missions can not rely on a single data source and that different data sources should complement each other, validate collected data, or systematically quantify the damage. The recent increase in the number of crowdsourcing and SM platforms used to source earthquake reconnaissance data demonstrates that this is likely to become an increasingly important source of data.

This paper focuses on parametric model order reduction (PMOR) of guided ultrasonic wave propagation and its interaction with damage in a fiber metal laminate (FML). Structural health monitoring in FML seeks to detect, localize and characterize the damage with high accuracy and minimal use of sensors. This can be achieved by the inverse problem analysis approach which employs the signal measurement data recorded by the embedded sensors in the structure. The inverse analysis requires to solve the forward simulation of the underlying system several thousand times. These simulations are often exorbitantly expensive and triggered the need for improving their computational efficiency. A PMOR approach hinged on the proper orthogonal decomposition method is presented in this paper. An adaptive parameter sampling technique is established with the aid of a surrogate model to efficiently update the reduced-order basis in a greedy fashion. A numerical experiment is conducted to illustrate the parametric training of the reduced-order model. The results show that the reduced-order solution based on the PMOR approach is accurately complying with that of the high fidelity solution.

Galls are characteristic plant structures formed by cell size enlargement and/or cell proliferation induced by parasitic or pathogenic organisms. Insects are a major inducer of galls, and insect galls can occur on plant leaves, stems, floral buds, flowers, fruits, or roots. Many of these exhibit unique shapes, providing shelter and nutrients to insects. To form unique gall structures, gall-inducing insects are believed to secrete certain effector molecules and hijack host developmental programs. However, the molecular mechanisms of insect gall induction and development remain largely unknown due to the difficulties associated with the study of non-model plants in the wild. Recent advances in next-generation sequencing have allowed us to determine the biological processes in non-model organisms, including gall-inducing insects and their host plants. In this review, we first summarize the adaptive significance of galls for insects and plants. Thereafter, we summarize recent progress regarding the molecular aspects of insect gall formation.

Alzheimer’s disease (AD) is a genetically complex senile neurodegeneration with unknown etiology. The first gene discovered to be mutated in early-onset AD, the amyloid precursor protein (APP), has been widely assumed as a causal factor in the disease cascade due to its generation of Aβ species. APP has an evolutionarily conserved biological role and activates a signaling program with notable similarities to integrin—a cell adhesion receptor with a wide array of functions. Intriguingly, several AD genome-wide association study (GWAS) candidate genes, including the SHARPIN locus recently reported by us and others, influence signaling of the integrin pathway. Integrins are focal adhesion regulators and serve in nervous system development, synaptic plasticity, and Tau phosphorylation. These observations suggest that the function of APP probably goes beyond Aβ generation in AD. Aging—the strongest risk factor for AD—is associated with various clock-like events in cells. For instance, neurons are continuously impacted by stochastic ‘hits’ to their genomes in aging, in the forms of DNA damage, insertion-deletions, copy-number variations (CNVs) and other types of somatic mutations. DNA damage and somatic mutations can result in neoplastic changes and cancer in mitotically active cells. However, their consequences in post-mitotic cells such as aging neurons are less defined. The current hypothesis holds that the stochastic loss of DNA sequence data at random loci in aging affects longer genes by chance more frequently. As a result, the biological processes coordinated by long genes may be more vulnerable to such random aging effects. Curiously, as shown by us and others, long genes are strongly enriched for synapse- and cell adhesion-related ontologies, more than any other biological process or cellular compartment. In addition, among various cell types, neurons possess the highest levels of long gene expression and are therefore more vulnerable to such harmful effects. The long gene vulnerability hypothesis provides a simple link between aging and the genetic landscape of AD and warrants new strategies for disease modification.

More than 700 thousand human deaths from mosquito bites are observed annually in the world. It is more than 2 times the number of annual murders in the world. In this regard, the invention of new more effective methods of protection against mosquitoes is necessary. In this article for the first time, comprehensive studies of mosquito neutralization using machine vision and a 1 W power laser are considered. Developed laser installation with Raspberry Pi that changing the direction of the laser with a galvanometer. We developed a program for mosquito tracking in real. The possibility of using deep neural networks, Haar cascades, machine learning for mosquito recognition was considered. We considered in detail the classification problems of mosquitoes in images. A recommendation is given for the implementation of this device based on a microcontroller for subsequent use as part of an unmanned aerial vehicle. Any harmful insects in the fields can be used as objects for control.

Keywords: underground engineering; numerical simulation; excavation length effect, major principal stress; displacement; damage initiation; CPU time

Identifying cracks in the incipient state is essential to prevent the failure of engineering structures. Detection methods relying on the analysis of the changes in modal parameters are widely used because of the advantages they present. In our previous research, we have found that eigenfrequencies were capable of indicating the position and depth of damage when sufficient vibration modes were considered. The damage indicator we developed was based on the relative frequency shifts (RFS). To calculate the RFSs for various positions and depths of a crack, we established a mathematical relation that involved the squared modal curvatures in the healthy state and the deflection of the healthy and damaged beam under dead mass, respectively. In this study, we propose to calculate the RFS for beams with several cracks by applying the superposition principle. We demonstrate that this is possible if the cracks are far enough from each other. In fact, if the cracks are close to each other, the superposition method does not work and we distinguish two cases: (i) when the cracks affect the same beam face, the frequency drop is less than the sum of the individual frequency drops, and (ii) on the contrary, cracks on opposite sides cause a decrease in frequency, which is greater than the sum of the frequency drop due to individual damage. When the RFS curves are known, crack assessment becomes an optimization problem, the cost function being the distance between the measured RFSs and all possible RFSs for several vibration modes. Thus, the RFS constitutes a benchmark that characterizes damage using only the eigenfrequencies. We can accurately locate multiple cracks and estimate their severity trough experiments and thus prove the reliability of the proposed method.

Ultrasonic measurements are used in civil engineering for structural health monitoring of concrete infrastructures. The late portion of the ultrasonic wavefield, the coda, is sensitive to small changes in the elastic moduli of the material. Coda Wave Interferometry (CWI) correlates these small changes in the coda with the wavefield recorded in intact, or unperturbed, concrete specimen to reveal the amount of velocity change that occurred. CWI has the potential to detect localised damages and global velocity reductions alike. In this study, the sensitivity of CWI to different types of concrete mesostructures and their damage levels is investigated numerically. Realistic numerical concrete models of concrete specimen are generated and damage evolution is simulated using the discrete element method. In the virtual concrete lab, the simulated ultrasonic wavefield is propagated from one transducer using a realistic source signal and recorded at a second transducer. Different damage scenarios reveal a different slope in the decorrelation of waveforms with the observed reduction in velocities in the material. Finally, the impact and possible generalizations of the findings are discussed and recommendations are given for a potential application of CWI in concrete at structural scale.

High costs for the repair of concrete structures can be prevented if damage at an early stage of degradation is detected and precautionary maintenance measures are applied. To this end, we use numerical wave propagation simulations to identify simulated damage in concrete using convolutional neural networks (CNN). Damage in concrete subjected to compression is modeled at the mesoscale using the discrete element method. Ultrasonic wave propagation simulation on the damaged concrete specimens are performed using the rotated staggered finite-difference grid method. The simulated ultrasonic signals are used to train a CNN based classifier capable of classifying three different damage stages (microcrack initiation, microcrack growth and microcrack coalescence leading to macrocracks). The performance of the classifier is improved by refining the dataset via an analysis of the averaged envelope of the signal. The classifier using the refined dataset has an overall accuracy of 90%.

Background: Morphological alterations in intracranial pressure pulse waveform (ICPPW) secondary to intracranial hypertension (ICP >20 mmHg) and reduction in intracranial compliance (ICC) are well known indicators of neurological severity. To date, no studies have documented the ICPPW modifications after intracranial hypertension resolution with decompressive craniectomy (DC). The present study aimed to assess the morphological alterations in ICPPW among neurocritical care patients with and without DC, by comparing the variations of ICPPW features according to elevations in mean ICP values. Methods: Patients requiring ICP monitoring because of severe traumatic or spontaneous conditions were included. Mean ICP values were compared with ICPPW features (P2/P1 ratio, TTP and pulse amplitude). Elevation in ICP was produced by means of ultrasound-guided manual internal jugular veins compression. Results were distributed for three groups: intact skull (exclusive burr hole for ICP monitoring), craniotomy/large fractures (group 2) or DC (group 3). Results: 57 patients were analyzed. 21 (36%) presented no skull defects, whereas 15 (26%) had DC. ICP was not significantly different between groups: ±13.59 for intact and ±17.66 mmHg for DC, with ICP induced elevation also similar between groups (p= 0.56). Significant elevation was observed for P2/P1 ratio for groups 1 and 2, whereas reduction was observed in group 3 (elevation of ±0.09 for groups 1 and 2, whereas reduction of 0.03 for group 3, p=0.01). Conclusion: In the present study, intracranial pressure pulse waveform analysis indicated that intracranial compliance was significantly more impaired among decompressive craniectomy patients, although ICPPW indicated DC to be protective for further influences of ICP elevations over the brain. Analysis of ICPPW seems to be an alternative to real time ICC assessment.

Damage in concrete structures initiates as the growth of diffuse microcracks that is followed by damage localisation and eventually leads to structural failure. Weak changes such as diffuse microcracking processes are failure precursors. Identification and characterisation of these failure precursors at an early stage of concrete degradation and application of suitable precautionary measures will considerably reduce the costs of repair and maintenance. To this end, a reduced order multiscale model for simulating microcracking-induced damage in concrete at the mesoscale levelis proposed. The model simulates the propagation of microcracks in concrete using a two-scale computational methodology. First, a realistic concrete specimen that explicitly resolves the coarse aggregates in a mortar matrix was generated at the mesoscale. Microcrack growth in the mortar matrix is modelled using a synthesis of continuum micromechanics and fracture mechanics. Model order reduction of the two-scale model is achieved using clustering technique. Model predictions are calibrated and validated using uniaxial compression tests performed in the laboratory.

Calcineurin plays a key role in cardiovascular pathogenesis by exerting pro-apoptotic effects in cardiomyocytes; however, its involvement in the regulation of cardiomyocyte autophagy under chronic intermittent hypoxia (CIH) remains largely unknown. Here we showed that CIH induced calcineurin activity in H9C2 cells, resulting in the attenuation of adenosine monophos-phate-activated protein kinase (AMPK) signaling and inhibition of H9C2 cell autophagy. Au-tophagy, LC3-II levels, and AMPK phosphorylation were significantly elevated in response to CIH in H9C2 cells by day 3; however, these effects were reversed, and calcineurin activity and apoptosis were significantly increased by day 5. The calcineurin inhibitor, FK506, restored AMPK activation and LC3 protein levels, and reduced CIH-induced H9C2 cell apoptosis, while calcineurin overexpression significantly attenuated the increase in LC3 levels and enhanced H9C2 cell apop-tosis. Calcineurin inhibition failed to induce autophagy or alleviate apoptosis in H9C2 cells ex-pressing a dominant negative K45R AMPK mutant. Autophagy downregulation abrogated the protective effects of FK506-mediated calcineurin inhibition. These results indicated that calcineurin suppressed adaptive autophagy during CIH by downregulating AMPK activation. Our findings showed the underlying mechanisms of calcineurin and autophagy regulation during H9C2 cell survival in response to CIH, and suggested a new strategy for preventing CIH-induced cardiomyocyte damage.

Chronic obstructive pulmonary disease (COPD) is a respiratory disease associated with airways inflammation and lung parenchyma fibrosis. The primary goals of COPD treatment are to re-duce symptoms and risk of exacerbations, therefore pulmonary rehabilitation is considered the key component of managing COPD patients. Oxidative airway damage, inflammation and re-duction of endogenous antioxidant enzymes are known to play a crucial role in the pathogenesis of COPD. Natural antioxidants have also recently been considered as they play an important role in metabolism, DNA repair and fighting the effects of oxidative stress. In this paper we evaluated the response of 105 elderly COPD patients to pulmonary rehabilitation (PR), based on high or low vegetable consumption, by analyzing clinical parameters and biological measure-ments at baseline and after completion of the three weeks PR. We found that high vegetable in-take in normal diet, without any specific intervention, can increase the probability to success-fully respond to rehabilitation (65.4% of responders ate vegetables daily vs. 40.0% of Non-Responders, p=0.033). Three weeks of pulmonary rehabilitation are probably too short to reveal a reduction of the oxidative stress and DNA damage, but are enough to show an im-provement in the patient's inflammatory state.

Galangin(Gal) is a natural active flavonoid compound separated from the roots and rhizomes of Alpinia ofcinarum Hance. Modern pharmacological studies have shown that Gal has a variety of biological activities such as anti-tumor, anti-fungal, anti-bacterial, anti-inflammatory, anti-ischemic stroke, suppressing vitiligo and Alzheimer’s disease, etc. The purpose of this research was to prepare a galangin self-microemulsion drug delivery system (Gal-SMEDDS) and compare its anti-oxidant activity and pharmacokinetics with free Gal.The average particle size of the prepared Gal-SMEDDS was approximately 21.33 nm, the polydispersity index was 0.096, the zeta potential was -4.09 mV, and the entrapment efficiency was 96.74%. Compared with free Gal, the release of Gal-SMEDDS was improved in vitro release experiment. Cell experiments showed that Gal had obvious anti-oxidation effect, and the effect of Gal-SMEDDS was better than that of free Gal. In vivo pharmacokinetic experiments showed that the pharmacokinetic parameters of Gal-SMEDDS were better than that of free Gal, which indicated that the self-microemulsion drug delivery system(SMEDDS) effectively increases the oral bioavailability of Gal and alters its pharmacokinetic parameters, such that it may be effective in the treatment of anti-oxidant.

The World Health Organization identifies alcohol as a cause in several neoplasias of the oro-pharynx cavity, esophagus, gastrointestinal tract, larynx, liver, or female breast. This study re-views ethanol's nonoxidative and oxidative metabolism and one-carbon metabolism that en-compasses both redox and transfer reactions that influence crucial cell proliferation machinery. Ethanol favors the uncontrolled production and action of free radicals that interfere with the maintenance of essential cellular functions. We focus on the generation of protein, DNA, and lipid adducts that interfere with the cellular processes related to growth and differentiation. Ethanol's effects on stem cells responsible for building and repairing tissues are reviewed. Cancer stem cells suffer disturbances related to the expression of cell surface markers, enzymes, and transcription factors after ethanol exposure with consequent dysregulation of mechanisms related to cancer metastasis or resistance to treatments. Our analysis aims to underlie and discuss potential targets that show more sensitivity to ethanol's action and identify specific metabolic routes and metabolic realms that may be corrected to recover metabolic homeostasis after pharmacological interven-tion. Specifically, research should pay attention to reestablish metabolic fluxes by fine-tuning the functioning of specific pathways related to one-carbon metabolism and antioxidant processes.

Chronic obstructive pulmonary disease (COPD) is a respiratory disease associated with airways inflammation and lung parenchyma fibrosis. The primary goals of COPD treatment are to re-duce symptoms and risk of exacerbations, therefore pulmonary rehabilitation is considered the key component of managing COPD patients. Oxidative airway damage, inflammation and re-duction of endogenous antioxidant enzymes are known to play a crucial role in the pathogenesis of COPD. Natural antioxidants have also recently been considered as they play an important role in metabolism, DNA repair and fighting the effects of oxidative stress. In this paper we evaluated the response of 105 elderly COPD patients to pulmonary rehabilitation (PR), based on high or low vegetable consumption, by analyzing clinical parameters and biological measure-ments at baseline and after completion of the three weeks PR. We found that high vegetable in-take in normal diet, without any specific intervention, can increase the probability to success-fully respond to rehabilitation (65.4% of responders ate vegetables daily vs. 40.0% of Non-Responders, p=0.033). Three weeks of pulmonary rehabilitation are probably too short to reveal a reduction of the oxidative stress and DNA damage, but are enough to show an im-provement in the patient's inflammatory state.

High temperature (HT) significantly affects the crop physiological traits and reduces the 12 productivity in plants. To increase yields as well as survival of crops under HT, developing heat13 tolerant plants is one of the main targets in crop breeding programs. The present study attempted 14 to investigate the linkage of the heat tolerance between the seedling and the reproductive growth 15 stages of tomato cultivars ’Dafnis‘ and ’Minichal’. This research was undertaken to evaluate heat 16 tolerance under two experimental designs such as screening at seedling stage and screening from 17 reproductive traits in greenhouses. Survival rate and physiological responses in seedlings of 18 tomatoes with 4-5 true leaf were estimated under HT (40 °C, RH 70%, day/night, respectively) and 19 under two control and HT greenhouse conditions (day time 28 °C and 40 °C, respectively). Heat 20 stress significantly affected physiological-chemical (photosynthesis, electrolyte conductivity, 21 proline) and vegetative parameters (plant height, shoot fresh weight, root fresh weight) in all 22 tomatoes seedlings. The finding revealed that regardless of tomato cultivars the photosynthesis, 23 chlorophyll, total proline and electrical conductivity parameters were varied in seedlings during the 24 heat stress period. The heat tolerance rate of tomatoes in the seedling stage might not be associated 25 always with reproductive parameters. HT reduced the fruit parameters likeas fruit weight (31.9%), 26 fruit length (14.1%), fruit diameter (19.1%) and fruit hardness (9.1%) in compared to NT under HT 27 in heat susceptible tomato cultivar ‘Dafnis’, while in heat tolerant cultivar ‘Minichal’ fruit length 28 (7.1%) and fruit diameter (12.1%) was decreased by the affect of HT but on the contrary fruit weight 29 (3.6%) and fruit hardness (8.3%) were increased. In conclusion, screening and selection for tomatoes 30 should be evaluated at the vegetative and reproductive stages with consideration of reproductive 31 parameters.

Climate change causes weather extremes to rise in frequency and severity, which could have detrimental effects on human life, property and livelihood activity. There is significant uncertainty about the influences of anthropogenic climate change on the occurrence and severity of small-scale, sudden onset weather phenomena such as hailstorms and subsequent loss and damage. Yet, several studies indicate that there is an apparent stable connection between hailstorm activity and hailstorm damage. Severe hailstorm events are observed in Bangladesh in recent years, which are, in fact, rapid-onset disasters but low exposure in terms of giving government response and media consideration. Hence this study examines potential impacts and management strategies for loss and damage resulting from hailstorm events among smallholder farmers in Kurigram District's Phulbari Upazila of Bangladesh. Firstly, the direct and long term economic and non-economic loss and damage caused by the hailstorm on human well-beings and livelihoods were assessed. Then, the study evaluated the current adaptation, coping, management and response strategies at the institutional and community level in the context of such extreme events. Finally, a regulatory framework and implementation approaches had suggested achieving the country's resilience against disaster and climate change-induced loss and damage. Participatory Vulnerability Analysis, Key Informant Interviews and Sample Surveys accumulated the primary data for the study. In addition, secondary data were collected through analysis of literature, published and unpublished scientific articles and media reports, etc. This research outcome will help countries develop a guideline to address climate change and disaster-related loss and damage.

In recent years in Bangladesh, there has been regular cyclonic event, flooding and erratic pre-monsoons precipitation that has hampered production greatly and forced Bangladesh to import salt from abroad to manage market deficiency. There is much uncertainty about the effects of climate change on the frequency and intensity of small-scale, sudden onset weather phenomena such as heavy rainfall and subsequent loss and damage (L&D). But, several studies indicate that an obvious strong relationship exists between irregular rainfall and associated L&D. Nowadays, severe changing rainfall patterns are observed in Bangladesh, which is rapid-onset in nature, but low exposed in terms of response. The current study explored a ‘double-exposed’ burden combined of both climatic (e.g., uneven rainfall) and non-climatic governance factors (e.g., imperfect trade policy, the absence of risk transfer mechanisms) which are hindering salt production and pushing the country from the aspiration of salt exporting to the net buyer. This chapter mainly assesses the impacts of L&D due to climatic events that are causing overwhelming effects on the well-being of marginal salt farmers at Kutubdia Upazila of Bangladesh. Data were mainly collected through Participatory Vulnerability Analysis (PVA), Key informant interviews (KII), and Sample Surveys (SS). This study would provide insights for improved disaster management policy and an appropriate adaptive measure to address such extreme events as well as to initiate a further study for understanding the nexus of ‘nature and market’ in building resilience among the marginal salt farmers.

The paper presents the identification and classification of steel cord failures in the conveyor belt core based on an analysis of a two-dimensional image of magnetic field changes recorded using the Diagbelt system around scanned failures in the test belt. The obtained set of identified changes in images obtained for numerous devices parameters settings were the base for statistical analysis. It makes it possible to determine the Pearson’s linear correlation coefficient between the parameters being changed and the image of the failures. In the second stage of the research, artificial intelligence methods were applied to construct a multilayer neural network (MLP) and to teach its appropriate identification of damage. In both methods were used the same data sets, which made it possible to compare methods.

The horse chestnut leaf miner Cameraria ohridella (Lepidoptera: Gracillariidae) is an invasive pest of horse chestnut and has spread through Europe since 1985. The horse chestnut leaf blotch Guignardia aesculi (Botryosphaeriales: Botryosphaeriaceae) is a fungal disease that also seriously damages horse chestnut trees in Europe. The interaction between the leaf miner and the fungus has not yet been sufficiently described. Therefore, the aim of the present study was to assess leaf damage inflicted to horse chestnut by both C. ohridella and G. aesculi during the vegetation season and to model their interaction. The damage to leaf area was measured monthly from May to September 2013 in České Budějovice, the Czech Republic. A simple phenomenological model describing the expected dynamics of the two species was developed. The study revealed a significant effect of sampling site and sampling period on the damage caused by both the pest and the fungus. The mathematical model indicates that infestation by C. ohridella is more affected by G. aesculi than vice versa. The possible mechanisms affecting the relationship between G. aesculi and C. ohridella are discussed.

Mosquitoes carrying endosymbiotic bacteria called Wolbachia are being released in mosquito and arbovirus control programs around the world. Open field releases of Wolbachia-infected male mosquitoes have achieved over 95% population suppression, while the replacement of populations with Wolbachia-infected females is self-sustaining and can greatly reduce local dengue transmission. Despite many successful interventions, significant questions and challenges lie ahead. Wolbachia, viruses and their mosquito hosts can evolve, leading to uncertainty around the long-term effectiveness of a given Wolbachia strain, while few ecological impacts of Wolbachia releases have been explored. Wolbachia strains are diverse and the choice of strain to release should be made carefully, taking environmental conditions and the release objective into account. Mosquito quality control, thoughtful community awareness programs and long-term monitoring of populations are essential for all types of Wolbachia intervention. Releases of Wolbachia-infected mosquitoes show great promise, but existing control measures remain an important way to reduce the burden of mosquito-borne disease.

A facile solid-phase synthetic method for incorporating the imidazoline ring motif, a surrogate for a trans peptide bond, into bioactive peptides is reported. The example described is the synthesis of an imidazoline peptidomimetic analog of an insect pyrokinin neuropeptide via a cyclization reaction of an iminium salt generated from the preceding amino acid and 2,4-diaminopropanoic acid (Dap).

The current SARS- CoV-2 pandemic underscores the importance of understanding the evolution of RNA genomes. While RNA is subject to the formation of similar lesions as DNA, the evolutionary and physiological impacts RNA lesions have on viral genomes are yet to be characterized. Lesions that may drive the evolution of RNA genomes can induce breaks that are repaired by recombination or can cause base substitution mutagenesis, also known as base editing. Over the past decade or so, base editing mutagenesis of DNA genomes has been subject to many studies, revealing that exposure of ssDNA is subject to hypermutation that is involved in the etiology of cancer. However, base editing of RNA genomes has not been studied to the same extent. Recently hypermutation of single-stranded RNA viral genomes have also been documented though its role in evolution and population dynamics. Here, we will summarize the current knowledge of key mechanisms and causes of RNA genome instability covering areas from the RNA world theory to the SARS- CoV-2 pandemic of today. We will also highlight the key questions that remain as it pertains to RNA genome instability, mutations accumulation, and experimental strategies for addressing these questions.

Pv11, an insect cell line established from the midge Polypedilum vanderplanki, is capable of ametabolic desiccation tolerance, so-called anhydrobiosis. We previously discovered that heat shock factor 1 (HSF1) contributes to the acquisition of desiccation tolerance by Pv11 cells, but the mechanistic details have yet to be elucidated. Here, by analyzing the gene expression profiles of newly established HSF1-knockout and -rescue cell lines, we show that HSF1 has a genome-wide effect on gene regulation in Pv11. HSF1-knockout cells exhibit a reduced desiccation survival rate, but this is completely restored in HSF1-rescue cells. By comparing mRNA profiles of the two cell lines, we reveal that HSF1 induces anhydrobiosis-related genes, especially genes encoding late embryogenesis abundant proteins and thioredoxins, but represses a group of genes involved in basal cellular processes, thus promoting an ametabolic state in the cell. In addition, HSF1 binding motifs are enriched in the promoters of anhydrobiosis-related genes and we demonstrate binding of HSF1 to these promoters by ChIP-qPCR. Thus, HSF1 directly regulates the transcription of anhydrobiosis-related genes and consequently plays a pivotal role in the induction of anhydrobiotic ability in Pv11 cells.

From the wide range of engineering materials traditional Stellite 6 alloy exhibits excellent cavitation erosion (CE) resistance. In this work, the effect of nitrogen ion implantation of HIPed Stellite 6 on the improvement of CE resistance and both cobalt-rich matrix phase transformation due to nitrogen implantation and CE were stated. The CE resistance of stellites ion-implanted by 120 keV N+ ions two fluences: 5x1016 cm-2 and 1x1017 cm-2 were comparatively analysed with the unimplanted stellite and AISI 304 stainless steel. CE tests were conducted according to ASTM G32 with stationary specimen method. Erosion rate curves and mean depth of erosion confirm that the nitrogen implanted HIPed Stellite 6 two times exceeds the resistance to CE than unimplanted stellite, and has almost 10 times higher CE reference than stainless steel. The X-ray diffraction (XRD) confirms that HIPed Stellite 6 nitrogen ion implantation favours transformation of the ɛ(hcp) to γ(fcc) structure. Unimplanted stellite ɛ-rich matirx is less prone to plastic deformation than γ and consequently, increase of γ phase effectively holds carbides in cobalt matrix and prevents Cr7C3 debonding. This phenomenon elongates three times the CE incubation stage, slows erosion rate and mitigates the material loss. Metastable γ structure formed by ion implantation consumes the cavitation load for work-hardening and γ → ɛ martensitic transformation. In further CE stages, phases transform as for unimplanted alloy namely, the cavitation-inducted recovery process, removal of strain, dislocations resulting in increase of fcc phase. The CE mechanism was investigated using a surface profilometer, atomic force microscopy, SEM-EDS and XRD. HIPed Stellite 6 wear behaviour relies on the plastic deformation of cobalt matrix, starting at Cr7C3/matrix interfaces. Once the Cr7C3 losing their restrain, are debonding and removed. Carbides detachment creates cavitation pits which initiate cracks propagation through cobalt matrix, the loss of matrix phase and CE proceeds with a detachment of massive chunk of materials.

Agricultural landscapes are more and more characterized by intensification and habitat losses. Landscape composition and configuration are known to mediate insect abundance and richness. In the context of global insect decline, and despite 75% of crops being under insect’s dependence, there is still a gap of knowledge about the link between pollinators and aromatic crops. Fennel (Foeniculum vulgare) is an aromatic plant cultivated in South of France, for its essential oil which is of great economic interest. Using pan-traps, we investigated the influence of the surrounding habitats at landscape scale (semi-natural habitat proportion and vicinity, landscape configuration) and local scale agricultural practices (insecticides and patch size) on fennel-flower-visitor abundance and richness and their subsequent impact on fennel essential oil yield. We found that fennel may to be a generalist plant species. We did not find any effect of intense local management practices on insect abundance and richness. Landscape configuration and the proximity to semi-natural habitat were the main drivers of flying insect’s family richness. This richness positively influenced fennel essential oil yield. Maintaining a complex configuration of patches at the landscape scale are important to sustain insect diversity and crop yield.

Dengue virus infections are a serious public health problem worldwide. Aedes aegypti is the primary vector of dengue in Cuba. Since there is no vaccine or specific treatment, the control efforts are directed to reduce mosquito populations. The indiscriminate use of pesticides can lead to increase insecticide resistance as well as adverse effects on human health. The sterile insect technique is a species-specific and environmental friendly method of insect control based on the release of large numbers of sterile males. The success of this technique in sustainable control of agricultural pests has encouraged its evaluation for mosquito control. Here, we describe an open field trial to evaluate the effect of the release of irradiated males on a wild population of Aedes aegypti. The case-control study was performed in a suburb of Havana, and compared the mosquito population before and after the intervention, in both control and treated areas. The wild population was monitored by an ovitrap network, recording frequency and density of eggs as well as their hatch rate. A significant induced sterility was observed in the field population, compared to the control. The ovitrap index and the mean eggs/ trap declined dramatically after an expected lag period of twelve and five weeks, respectively. For the last three weeks, no egg was collected in the treated area, evidencing a significant suppression of the wild population. We conclude that the sterile males released competed successfully, and induced enough sterility to suppress the local Aedes aegypti population.

Hepatitis delta virus (HDV) infection causes the most severe form of viral hepatitis but little is known about the molecular mechanisms involved. The recently developed HDV mouse model based on the delivery of HDV replication-competent genomes using adeno-associated vectors (AAV) develop a liver pathology very similar to the human disease, and allowed us to perform mechanistic studies. We have generated different AAV-HDV mutants to eliminate the expression HDV antigens (HDAgs), characterized them both in vitro and in vivo. We confirmed that S-HDAg is essential for HDV replication and cannot be replaced by L-HDAg or host cellular proteins, and the L-HDAg is essential for HDV infectious particle production. We have also found that the lack of L-HDAg resulted in the increase of of S-HDAg expression levels and the exacerbation of liver damage which is T cell independent but is associated with an increment in liver inflammation. Interestingly, early expression of L-HDAg significantly ameliorated the liver damage induced by the mutant expressing only the S-HDAg. In summary, the use of AAV-HDV represents a very attractive platform to interrogate in vivo the role of viral components in the HDV life cycle and to better understand the mechanism of HDV-induced liver pathology.

Samarinda City is one of the most attractive cities in Borneo Island (Indonesia) and also as a capital city of EastBorneo Province. The expansion of urban areas becomes essential due to rapid population and housing demand. Base on the statistical report, the annual population growth rate is 0.018% from the year 2016-2017 with a total population of 843446 inhabitants. Many natural disasters occur in some areas in this city, especially flooding. This natural disaster occurs almost every year, many people suffered and forced to evacuate. In 2018 there is 3 flood event with 28311 people was suffered and evacuated, and 5170 houses were flooded [1]. During the flood event, it was very possible to gain damages to their property and make traffic stuck. One common way to reducing the damages is using Early Warning Systems (EWS). Early warning is a major element for disaster risk reduction, including damages. To prevent and mitigate the impact of a disaster, many countries had taken action to build various methods of a public warning system. An effective early warning system focused on people-centered and comprises the following element, such as risk knowledge, technical monitoring and service, communication and dissemination of warnings, and community response capability [2]. Related to the existing condition which Samarinda is a Muslim-dominated city and obviously has a lot of a number of mosques. This is a good potency to develop an early warning system because every mosque has a loudspeaker for echoing Adzan (Muslim prayer-calling). With this existing condition, the loudspeaker can be utilized as a flood outdoor-voice warning announcer. The aim of this study is to briefly introduce the strategy of dissemination early warning by utilizing mosques. The hope of early warning dissemination is giving enough time to the people to evacuate their property to reduce damages and possibly to giving information to avoiding traffic stuck (in a certain location)due to flooding. The results of this study can be used as input for decision-makers to develop effective flood management strategies and policies, especially in the case of an early warning system where not well-developed in Samarinda.

This paper aims to provide an overall review of degradation, damage evolution and fatigue models in the literature of various engineering materials, mostly metals, and composites.

In cotton cultivars, an insect that causes irreversible damage is the Spodoptera frugiperda, known as the fall armyworm. Since the visual detection of plants is a burdensome task for human inspection, the spectral information related to plant damage, registered on a spectral scale, can be useful. These measurements, associated with machine learning techniques, produce useful information for a rapid and non-invasive inspection method development. To contribute to this gap fulfillment, this paper proposes a machine learning framework to model the spectral response of cotton plants under the attack of the fall armyworm. Additionally, a theoretical model is presented, built from the results of the machine learning analysis, to infer this damage with up-to-date orbital sensors. The data was composed of the reflectance measurements collected at a cotton field with control plants and plants submitted to Spodoptera frugiperda damage. Their spectral response was recorded with a hand-held spectroradiometer ranging from 350 to 2,500 nm, for eight consecutive days. Different machine learning models were evaluated and the overall best model was defined by accuracies comparisons on a testing-set. A ranking approach was adopted based on the model accuracy, returning the most contributive wavelengths for the classification. Sequentially, an unsupervised neural network (Self-Organizing Map - SOM) was implemented to reduce data-dimensionality and assist in the definition of important spectral regions. The regions were associated with the spectral bands of the two sensors (OLI and MSI) and a theoretical model using a band simulation process with the overall best machine learning model was proposed. The results indicated that the Random Forest (RF) algorithm is the most suitable to predict cotton-plants damaged by insects and that the last day of analysis (8th day) was better to separate it, with F-measure equals 0.912. The ranking approach combined with the SOM method indicated the spectral regions at the red to near-infrared (650 to 1,350 nm) and shortwave infrared (1,570 to 1,640 nm) as the most important regions to the analysis. The proposed theoretical model simulated with the OLI and MSI sensor-bands returned an F-Measure of 0.865 and 0.886, respectively. In conclusion, this framework can be used to map cotton-plants under insect-attack. The theoretical model presents high accuracy to infer the insect-damaged on cotton plants based on multispectral bands from other sensors, being a useful tool for future research that intends to evaluate it in other areas and at different field scales.

The genus Flavivirus contains pathogenic vertebrate-infecting flaviviruses (VIFs) and in-sect-specific flaviviruses (ISF). ISF transmission to vertebrates is inhibited at multiple stages of the cellular infection cycle, via yet to be elucidated specific antiviral responses. The Zinc-finger an-tiviral protein (ZAP) in vertebrate cells can bind CpG dinucleotides in viral RNA, limiting virus replication. Interestingly, the genomes of ISFs contain more CpG dinucleotides compared to VIFs. In this study, we investigated whether ZAP prevents two recently discovered lineage II ISFs, Binjari (BinJV) and Hidden Valley viruses (HVV) from replicating in vertebrate cells. BinJV protein and dsRNA replication intermediates were readily observed in human ZAP knockout cells when cultured at 34 ˚C. In ZAP expressing cells, inhibition of the interferon response via interferon response factors 3/7 did not improve BinJV protein expression, whereas treatment with kinase inhibitor C16, known to reduce ZAP’s antiviral function, did. Importantly, at 34 ˚C both BinJV and HVV successfully completed the infection cycle in human ZAP knockout cells evident from infectious progeny virus in the cell culture supernatant. Therefore, we identify vertebrate ZAP as an important barrier that protects vertebrate cells from ISF infection This provides new insights into flavivirus evolution and the mechanisms associated with host switching.

The lipid composition of biomembranes influence the properties of the lipid bilayer as well as that of the proteins. In this study, the lipidome and the lipid/protein ratio of membranes from High FiveTM insect cells overexpressing mouse P-glycoprotein was characterized. This provides a better understanding of the lipid environment in which P-glycoprotein is embedded, and thus of its functional and structural properties. The relative abundance of the distinct phospholipid classes and their acyl chain composition was characterized. A mass ratio of 0.57 +/- 0.11 phospholipids to protein was obtained. Phosphatidylethanolamines are the most abundant phospholipids, followed by phosphatidylcholines. Membranes are also enriched in negatively charged lipids (phosphatidylserines, phosphatidylinositols and phosphatidylglycerols), and contain small amounts of sphingomyelins, ceramides and monoglycosilatedceramides. The most abundant acyl chains are monounsaturated, with significant amounts of saturated chains. The characterization of the phospholipids by HPLC-MS allowed identification of the combination of acyl chains, with palmitoyl-oleoyl being the most representative for all major phospholipid classes except for phosphatidylserines, which are mostly saturated. A mixture of POPE:POPC:POPS in the ratio 45:35:20 is proposed for the preparation of simple representative model membranes. The adequacy of the model membranes was further evaluated by characterizing their surface potential and fluidity.

Single-stand selective monofunctional uracil DNA glycosylase 1 (SMUG1) works to remove uracil and certain oxidized bases from DNA during base excision repair (BER). This review provides a historical characterization of SMUG1 and 5-hydroxymethyl-2'-deoxyuridine (5-hmdU) one important substrate of this enzyme. Biochemical and structural analyses provide remarkable insight into the mechanism of this glycosylase revealing SMUG1 has a unique helical wedge which influences damage recognition during repair. Rodent studies suggest that, while SMUG1 shares substrate specificity with another uracil glycosylase UNG2, loss of SMUG1 can have unique cellular phenotypes. This review highlights the multiple roles SMUG1 may play in preserving genome stability, and how the loss of SMUG1 activity may promote cancer. Finally, we discuss recent studies indicating SMUG1 has moonlighting functions beyond BER, playing a critical role in RNA processing including the RNA component of telomerase.

The enterohemorrhagic Escherichia coli (EHEC) O157: H7 EspF is known to be a multifunctional effector that triggers several damage processes in the host cells. However, in the process of EHEC O157: H7 infection, the interactions between EspF, its N- or C-terminus, and host proteins are still unclear. In this work, we use co-immunoprecipitation combined with mass spectrometry (CoIP-MS) to screen the interactions between EspF/EspF-N/EspF-C terminus and host proteins. A total of 311 host proteins are analyzed. The N-terminus of EspF is found to interact with 192 proteins, whereas 205 proteins interact with the C-terminus. These proteins are mainly involved in RNA splicing, endoplasmic reticulum stress, and a variety of metabolic signaling pathways. Surprisingly, MS results reveal that EspF can also phosphorylate H2AX, suggesting that EspF may directly mediate DNA damage. Here, by western blot and immunofluorescence (IF), we verified that EspF can cause phosphorylation of H2AX and mediates cell multi-nuclearation and cell hypertrophy. Furthermore, we verify here for the first time that SMC1 interacts with EspF -C-terminus, and provide evidence that EspF increases p-SMC1 levels. p-SMC1 is known to influence S-phase cell cycle arrest and usually increases during periods of DNA damage. Our work revealed a novel interaction between EspF and the host protein SMC1 and lays a foundation for further research on EspF-mediated host DNA damage, apoptosis, and even colorectal carcinogenesis.

Susceptibility to photoimmune suppression and photocarcinogenesis is greater in male than in female humans and mice and is exacerbated in female estrogen receptor-beta knockout (ER-β-/-) mice. We previously reported that the active vitamin D hormone, 1,25-dihydroxyvitamin D3 (1,25(OH)2D) applied topically protects against ultraviolet radiation (UV)-induction of cutaneous cyclobutane pyrimidine dimers (CPDs) and suppression of contact hypersensitivity (CHS) in female mice. Here we compare these responses in female versus male Skh:hr1 mice, in ER-β-/- versus wild type C57BL/6 mice, and in female ER-blockaded Skh:hr1 mice. Induction of CPDs was significantly greater in male than female Skh:hr1 mice and was more effectively reduced by 1,25(OH)2D in female Skh:hr1 and C57BL/6 mice, than in male Skh:hr1 or ER-β-/- mice respectively. This correlated with reduced sunburn inflammation by 1,25(OH)2D in female but not male Skh:hr1 mice. Furthermore, although 1,25(OH)2D alone dose-dependently suppressed basal CHS responses in male Skh:hr1 and ER-β-/- mice, UV-induced immunosuppression was universally observed. In female Skh:hr1 and C57BL/6 mice, the immunosuppression was decreased by 1,25(OH)2D dose-dependently, but not in male Skh:hr1, ER-β-/- or ER-blockaded mice. These results reveal a sex bias in genetic, inflammatory and immune photoprotection by 1,25(OH)2D favoring female mice, that is dependent on the presence of ER-β.

Long-haul COVID-19 illness first gained widespread recognition among social support groups and later in scientific and medical communities. This illness is mysterious as it affects COVID-19 survivors at all levels of disease severity, even younger adults and children. While the precise definition may be lacking, the defining symptoms are fatigue, dyspnea, and headache that last for months after hospital discharge. The less typical symptoms may include cognitive impairments, chest and joint pains, myalgia, smell and taste dysfunctions, cough, mood changes, and gastrointestinal and cardiac issues. Presently, there is limited literature discussing the possible pathophysiology, risk factors, and treatments in long-haul COVID-19, which the current review aims to address. In brief, long-haul COVID-19 may be driven by long-term lung and brain damage and unresolved inflammation from multiple sources. The associated risk factors may include female sex, more than five early symptoms, early dyspnea, and specific biomarkers like D-dimer. While only rehabilitation training has been useful for long-haul COVID-19, therapeutics repurposed from mast cell activation syndrome, myalgic encephalomyelitis/chronic fatigue syndrome, and pulmonary fibrosis also hold potential. In sum, this review hopes to provide the current understanding of what is known about long-haul COVID-19.

The study assessed the changes in the quality and physical and chemical parameters of apples of four cultivars (‘Gala’, ‘Idared’, ‘Topaz’, ‘Red Prince’) subjected to mechanical vibrations during transport under model conditions and after storage (shelf-life). Quality changes in apples were evaluated based on skin and flesh colour, total soluble solids, dry matter, firmness, titratable acidity, pH value, total polyphenol content and antioxidant capacity. The applied vibrations at a frequency of 28 Hz caused changes in the above parameters, which were visible also after storage and depended on cultivar, but did not show any clear trend or direction. Skin colour varied whereas flesh colour remained stable. Vibrations resulted in a decrease in firmness. The greatest stability of quality parameters, the highest content of bioactive compounds and the highest antioxidant capacity were observed for ‘Red Prince’ and ‘Topaz’ apples – this refers to the control and treated samples before and after storage. However, total polyphenol content and antioxidant capacity increased in all studied cultivars as a result of vibrations and storage, which suggests that 28 Hz mechanical vibrations and short-term cold storage did not reduce the health promoting potential of the apples.

The coffee leaf miner Leucoptera coffeella (Guérin-Mèneville & Perrottet), is a key pest in coffee producing countries. During their development, the larvae feed on the palisade parenchyma of the leaves forming mines. As a result, the photosynthetic area of the plant decreases, affecting coffee production. Despite the severity of the damage caused by coffee leaf miner (CLM), morphological aspects of the larval development and the adult genitalia remain unknown. It is important to identify more susceptible targets to an efficient and narrow control by natural or synthetic approaches, relies on determining the larval instars. Equally important is the sexing of the adult, in experiments aiming efficient ways to control CLM, as the study of pheromone-based control methods. This work presents the first morphological description of the four larval instars and the adult genitalia of L. coffeella. In each larval instar, we measured the Mean ± SD (mm) of the cephalic capsules (1^st 0,14±0,03; 2^nd 0,25±0,04; 3^rd 0,32±0,03; 4^th 0,42±0,03) and observed the following morphological details: primary setae, prolegs, crochets and ecdysial line of the cephalic capsule. In the adults, we observed the sexual structures present in both genitalia: male - bulbus ejaculatorius, valva, anellus, gnathos and aedeagus and female - ovipositor, sclerite and corpus bursae. The dissection of the adult specimens confirmed that the external morphology corresponds to the correct sex attribution in CLM adults. These results may support innovative and improved control strategies for CLM Integrated Pest Management (IPM).

Imbalance in the oxidative status in neurons, along with mitochondrial damage, are common characteristics in some neurodegenerative diseases. The maintenance in energy production is crucial to face and recover from the oxidative damage and the coexistence of different sources of energy production, such as mitochondrial and glycolytic ATP, allows faster adaptative mechanisms to situations of high energy demand and may help in the maintenance of neuronal function in stress situations. Fingolimod phosphate is a drug with neuroprotective and antioxidant actions, used in the treatment of Multiple Sclerosis. This work has been performed in a model of oxidative damage on neuronal cell cultures exposed to menadione, in presence or absence of fingolimod phosphate. We have studied the mitochondrial function and several pathways related with glucose metabolism, including oxidative, glycolytic and pentose phosphate in neuronal cells cultures. Our results showed a beneficial effect on neuronal survival probably based in the recovery of all, oxidative balance, glycolysis and pentose phosphate, promoted by fingolimod phosphate. These effects are mediated, at least in part by the interaction with its specific receptor. These actions would make this drug a potential tool to the treatment of neurodegenerative processes, either to slow progression or alleviate symptoms.

The effect of the strain rate on damage in carbon black filled EPDM stretched during single and multiple uniaxial loading is investigated. This has been performed by analysing the stress-strain response, the evolution of damage by Digital Image Correlation (DIC), the associated dissipative heat source by InfraRed thermography (IR), and the chains network damage by swelling. The strain rates were selected to cover the transition from quasi-static to medium strain rate conditions. In single loading conditions, the increase of the strain rate yields in a preferential damage of the filler network while rubber network is preserved. Such damage is accompanied by a stress softening and an adiabatic heat source rise. Conversely, increasing the strain rate in cyclic loading conditions yields in a filler network accommodation and a high self-heating whose combined effect is proposed as a possible cause of the ability of filled EPDM to limit damage, by reducing cavities opening during loading and favoring cavities closing upon unloading.

Defectively manufactured and deliberately damaged composite laminates fabricated with different continuous reinforcing fibres (respectively, carbon and glass) and polymer matrices (respectively, thermoset and thermoplastic) were inspected in magnetic resonance imaging equipment. Two pulse sequences were evaluated during non-destructive examination conducted in saline solution-immersed samples to simulate load-bearing orthopaedic implants permanently in contact with biofluids. The orientation, positioning, shape, and especially the size of translaminar and delamination fractures were determined according to stringent structural assessment criteria. The spatial distribution, shape, and contours of water-filled voids were sufficiently delineated to infer the amount of absorbed water if thinner image slices than this study were used. The surface texture of composite specimens featuring roughness, waviness, indentation, crushing, and scratches was outlined, with fortuitous artefacts not impairing the image quality and interpretation. Low electromagnetic shielding glass fibres delivered the highest, while electrically conductive carbon fibres produced the poorest quality images, particularly when blended with thermoplastic polymer, though reliable image interpretation was still attainable.

Wenchuan earthquake that occurred in China in 2008 caused severe damage to a large number of electric substations. In this paper, Kriging interpolation method was used to calculate the impact area of the instrumental seismic intensity in Wenchuan earthquake, and to compare the intensities based on strong motion observation against the instrumental seismic intensities at locations where the observation data is available. The instrumental seismic intensities were calculated for the Wenchuan Earthquake at substations in the national power grid with voltage of 110kV or higher in areas of Mianyang, Deyang, Guangyuan and Chengdu. The cumulative Gaussian distribution function was then used to fit the relationship of the curves of the damage probabilities of high-voltage electrical equipment such as transformers, voltage mutual inductors, current mutual inductors, circuit breakers, isolating switches and lightning arrester with their instrumental seismic intensities. The damage probability density distribution curve of high-voltage electrical equipment based on the instrumental seismic intensities was obtained. The results showed that: (1) In the lower seismic intensity region, the mean instrumental seismic intensity was in good agreement with the traditional seismic intensity, but there was noticeable dispersion; in regions of intensity IX and above, the instrumental intensity was lower than the seismic intensity, but there was a lower degree of dispersion. (2) Among high-voltage electrical equipment, the transformers were most vulnerable to damage and they had some damage even under lower instrumental intensity. More damage would be produced when the instrumental intensity reached VIII or above; the second most vulnerable equipment was the circuit breaker, and the damage was most likely to occur when the instrument intensity was IX or above . (3) The damage rate curves of lightning arresters, current mutual inductors, voltage mutual inductors and isolating switches were relatively close to each other and the damage probability was the highest when the instrumental intensity was about X.

Wenchuan earthquake that occurred in China in 2008 caused severe damage to a large number of electric substations. In this paper, Kriging interpolation method was used to calculate the impact area of the instrumental seismic intensity in Wenchuan earthquake, and to compare the intensities based on strong motion observation against the instrumental seismic intensities at locations where the observation data is available. The instrumental seismic intensities were calculated for the Wenchuan Earthquake at substations in the national power grid with voltage of 110kV or higher in areas of Mianyang, Deyang, Guangyuan and Chengdu. The cumulative Gaussian distribution function was then used to fit the relationship of the curves of the damage probabilities of high-voltage electrical equipment such as transformers, voltage mutual inductors, current mutual inductors, circuit breakers, isolating switches and lightning arrester with their instrumental seismic intensities. The damage probability density distribution curve of high-voltage electrical equipment based on the instrumental seismic intensities was obtained. The results showed that: (1) In the lower seismic intensity region, the mean instrumental seismic intensity was in good agreement with the traditional seismic intensity, but there was noticeable dispersion; in regions of intensity IX and above, the instrumental intensity was lower than the seismic intensity, but there was a lower degree of dispersion. (2) Among high-voltage electrical equipment, the transformers were most vulnerable to damage and they had some damage even under lower instrumental intensity. More damage would be produced when the instrumental intensity reached VIII or above; the second most vulnerable equipment was the circuit breaker, and the damage was most likely to occur when the instrument intensity was IX or above . (3) The damage rate curves of lightning arresters, current mutual inductors, voltage mutual inductors and isolating switches were relatively close to each other and the damage probability was the highest when the instrumental intensity was about X.

Lemongrass (Cymbopogon flexuosus) is an aromatic perennial grass grown extensively for its essential oil. Lemongrass oil is chiefly a mixture of various cyclic and acyclic bioactive monoterpenes. We reviewed lemongrass oil and its biosynthesis in the present chapter along with its biochemical composition. Furthermore, we attempted to explore both the possible routes for essential oil biosynthesis in lemongrass, i.e. mevalonate and non-mevalonate pathways and how these pathways interwind with each other. Lemongrass oil has high commercial potential in medicinal, cosmetic, food and energy industries. Regarding the pharmacological properties, a wide array of biological activities has been observed in lemongrass oil such as antimicrobial, insecticidal, analgesic and anti-cancer properties as well as its efficacy as insect-repellent. The later sections were dedicated for the analysis of insecticidal property of the lemongrass oil and the mechanism working behind this phenomenon where it was observed that in addition to synergistic effects, various components of lemongrass oil can also induce specific neurotoxic and cytotoxic responses in the insects.

To understand lung damage caused by COVID-19, we deduced two-phase lung damage mechanisms. After the lungs are infected with SARS-CoV-2 virus, the affected lung tissue swells and surface properties of pulmonary capillaries change, resulting in an increased flow resistance of affected capillaries. If a sufficient number of capillaries are affected by the infection, the swelling and increased cell wall adhesion collectively raise pulmonary vascular resistance. The increased vascular resistance further increases the dwell times of WBCs in affected capillaries and nearly capillaries. When pulmonary pressure is sufficiently higher, WBCs are forced to squeeze into interstitial spaces or alveolar spaces when local pressures are higher than what the capillaries can withstand. When more and more WBCs are dynamically retained, the flow resistance of more capillaries rises, pulmonary vascular resistance rises, and pulmonary pressure rises. The rise in the pulmonary pressure in turn results in elevated capillary pressures. When capillary pressures around the alveoli are sufficiently high, they cause interstitial pressures to change from normally negative values to positive values. The positive pressures cause fluid leakage to the alveolar space and thus degrade lung function. Tissue swelling, and occupation of WBCs in interstitial spaces and alveolar spaces further reduce compressible volume, and thus cause further rise in the pulmonary vascular resistance and pulmonary pressure. When the pulmonary pressure has reached a critical point as in the second phase, the blood breaks capillary walls and squeezes through interstitial spaces to reach alveolar spaces, resulting in irreversible lung damages. The available free volume in the thorax cage, organ usable capacities, temperature and humid are expected to have great impacts on degree of lung damages. The free volume in the thorax cage, lung usable surplus capacity, and other organ usable capacities determine the arrival time of last-phase irreversible damage. The mechanisms imply that the top priority for protecting lungs is maintaining pulmonary micro-circulation and preserving organ functions in the entire disease course while controlling viral reproduction should be stressed in the earliest time possible. The mechanisms also explain leukecytes are recruited and migrated into inflamed tissues by increasing their dwell times caused by increased local flow resistance.

Is the extensive decline of insects partially due to an insect-specific feature of their functional organization that is disadvantageous for living in an industrialized environment? The unique way in which gases are supplied in insect tissues is such a special trait. It exposes cells directly to the gas phase, via tracheae that end in micro-tubes, the tracheoles, which have diameters in the same range as particles of ultra-fine dust transported by air of industrialized countries. Number and volume of these particles – calculated to be inhaled by honeybees, e.g., – are indicative to locally impede O2-uptake and CO2-release and thus to restrain physiological activities.

Low soil nitrogen status of savanna soils in Nigeria contributes to the persistent Striga hermonthica (Del.) Benth. infestation that limits maize production. The application of nitrogen fertilizer to Striga-resistant hybrids may reduce Striga infection and increase grain yields. This study assessed the performance of maize hybrids at low (30 kg ha-1) and high (120 kg ha-1) nitrogen application under natural infestation with Striga at Kafin Madaki and Tudun Wada in 2014 and 2015. Results showed that the application of nitrogen at 120 kg ha-1 reduced number of Striga plants by 59% compared to application at 30 kg N ha-1 in Kafin Madaki and by 21% in Tudun Wada. Compared to 30 kg N ha-1, the 120 kg N ha-1 rate also reduced Striga damage rating by 22% in Kafin Madaki and by 33% in Tudun Wada across the hybrids. Hybrids 8338-1 (5.3) and OBASUPER 1 (4.3) were the only entries with Striga damage rating greater than 4.5 (SDR > 4.5) when averaged across the nitrogen levels at both locations. Grain yield was 86 and 98% higher in Kafin Madaki and Tudun Wada, respectively when N was applied at 120 kg N ha-1 than at 30 kg N ha-1. The hybrids M1124-3 and M1227-14 produced grain yields that were significantly higher than those of the other hybrids in all locations. The hybrid 8338-1 produced the lowest grain yield across locations. Our results showed that, the application of 120 kg N ha-1 to Striga resistant maize hybrids will reduce Striga infection and increase grain yield.

COVID-19 pandemic represents an unprecedented sanitary threat: antiviral and host-directed medications to treat the disease are still urgently needed.A great effort has been paid to find drugs and treatments for hospitalized, severely ill patients. However, medications used for the domiciliary management of initial symptoms, notwithstanding their importance, have not been and are not presently regarded with the same attention. In analogy with other respiratory viral infections, COVID-19 patients in the early phase require specific antivirals (still lacking) and non-etiotropic drugs to lower pain, fever and control inflammation. Non-steroidal antinflammatory drugs (NSAIDs) and paracetamol (PAC) are widely used as non-etiotropic agents in these conditions and hence are both theoretically repurposable for COVID-19. However, a warning from some research reports and National Authorities raised NSAIDs safety concerns because of the supposed induction of ACE2 protein levels (the receptor used by SARS-CoV2 to enter host airways cells), the risk of bacterial superinfections and masking of disease symptoms. As a consequence, the use of NSAIDs was, and is, strongly discouraged while the alternative adoption of paracetamol is still preferred.On the basis of novel data and hypothesis on the possible role of scarce glutathione (GSH) levels in the exacerbation of COVID-19 and of the GSH depleting activity of PAC, this commentary raises the question of whether PAC may produce an oxidative imbalance which could be detrimental in COVID-19 clinical outcomes.

The purpose of this study was to better understand the interactive impact of two soil-borne pathogens, Phytophthora cactorum (as the primary pathogen) and Armillaria gallica (as secondary), on two-year-old seedlings of silver birch (Betula pendula) subjected to stress caused by mechanical defoliation simulating primary insect feeding. One year after treatments, the chlorophyll fluorescence measurement and gas chromatography coupled with mass spectrometry (GC-MS) were used to analyze the photosynthetic activity in leaves, the volatile organic compounds (VOCs) emitted by birch leaves and chemical compounds from roots. Only the infection of roots by P. cactorum increased photosynthetic rates in the leaves, which may suggest its cryptic development in contrast to fungi. The birch leaves in seedlings exposed to 50% defoliation, inoculation with P. cactorum and A. gallica emitted more aromatic carbonyls and alcohols, as well as half as much aliphatic esters, compared to untreated controls. In infected birch roots, the production of phenols, triterpenes and fatty alcohols increased, but fatty acids decreased. This was the first experimental confirmation of the pathogenicity of P. cactorum on silver birch seedlings in Poland. The most severe damage to roots took place only in the case of two-way or three-way interactions. Higher levels of aromatic carbonyls and alcohols in leaves, as well as phenolic compounds in roots of stressed birches (compared to control) suggest an activation of plant systemic acquired resistance (SAR).

This randomized trial compared pea protein, whey protein, and water-only supplementation on muscle damage, inflammation, delayed onset of muscle soreness (DOMS), and physical fitness test performance during a 5-day period after a 90-minute eccentric exercise bout in non-athletic, non-obese males (n=92, ages 18-55 years). The two protein sources (0.9 g protein/kg divided into three doses/day) were administered under double blind procedures. The eccentric exercise protocol induced significant muscle damage and soreness, and reduced bench press and 30-second Wingate performance. Whey protein supplementation significantly attenuated post-exercise blood levels for biomarkers of muscle damage compared to water-only, with large effect sizes for creatine kinase and myoglobin during the 4th and 5th days of recovery (Cohen's d >0.80); pea protein versus water supplementation had an intermediate, non-significant effect (Cohen's d <0.50); and no significant differences between whey and pea protein were found. Whey and pea protein compared to water supplementation had no significant effects on post-exercise DOMS and the fitness tests. In conclusion, high intake of whey protein for 5 days after intensive eccentric exercise mitigated efflux of muscle damage biomarkers, with intake of pea protein having an intermediate effect in part due to the 24% lower leucine amino acid content.

To quantify damage to reinforced concrete (RC) column members after an earthquake, an engineer needs to know the maximum applied force that was generated by the earthquake. Therefore, in this work, piezoceramic transducers are used to detect the applied force on an RC column member under dynamic loading. To investigate the use of post-embedded piezoceramic sensors in detecting the force that is applied to RC columns, eight full-size RC column specimens with various failure modes are tested under specific earthquake loadings. Post-embedded piezoceramic sensors are installed at a range of depths (70-80 mm) beneath the surface of a column specimen to examine the relationship between the signals that are obtained from them and the force applied by the dynamic actuator. The signals that are generated by the post-embedded piezoceramic sensors, which correlate with the applied force, are presented. These results indicate that the post-embedded piezoceramic sensors have great potential as tools for measuring the maximum applied force on an RC column in an earthquake. Restated, signals that are obtained from post-embedded piezoceramic sensors on an RC column in an earthquake can be used to determine the applied force and corresponding damage or residual seismic capacity.

Tree members of the genus Acacia have benefits that are obvious for enhancing soil fertility in farming, forestry and agroforestry in regions with nutrient-poor soils, and for restoring degraded ecosystems and lands. Nevertheless, the species of the genus Acacia have got the potential to bring about significant adverse impacts on biodiversity or ecosystem functioning when it gets invasive. The ecology of the species in nearly all areas of its created range remains poorly understood. Here we have compiled the information regarding the importance, cultivation and the production of important species of genus Acacia. We hope this information will be useful to get awareness about the crucial trees in the genus Acacia.

Several herbivores feed on maize in field and storage setups making the development of multiple-insect resistance a critical breeding target. In this study, an association mapping panel of 341 tropical maize lines was evaluated in three field environments for resistance to FAW (fall armyworm) whilst bulked grains were subjected to MW (maize weevil) bioassay, genotyped with Diversity Array Technologies single nucleotide polymorphisms (SNPs) markers. A multi-locus genome-wide association study (GWAS) revealed 62 quantitative trait nucleotides (QTNs) associated with FAW and MW resistance traits on all 10 maize chromosomes, of which, 47 and 31 were discovered at stringent Bonferroni genome-wide significance level of 0.05 and 0.01, respectively, and located within or close to multiple-insect resistance genomic regions (MIRGRs) concerning FAW, SB, and MW. Sixteen QTNs influenced multiple-traits of which six were associated with resistance to both FAW and MW suggesting a pleiotropic genetic control. Functional prioritization of candidate genes (CGs) located within 10-30kb of the QTNs revealed 64 putative GWAS-based CGs (GbCGs) showing evidence of involvement in plant defense mechanisms. Only one GbCG was associated with each of five of the six combined-resistance QTNs, thus, reinforcing the pleiotropy hypothesis. In addition, through In-silico co-functional network inferences, an additional 107 Network-based CGs (NbCGs), biologically connected to the 64 GbCGs, differentially expressed under biotic or abiotic stress were revealed within MIRGRs. The provided multiple-insect resistance physical map should contribute to the development of combined-insect resistance in maize.

In this paper, the results of finite element analyses of a single-layer cylindrical latticed shell under severe earthquake is presented. A 3D Finite Element model using fiber beam elements were used to investigate the collapse mechanism of this type of shell. The failure criteria of structural members are simulated based on the theory of damage accumulation. Severe earthquake of peak ground acceleration (PGA) of 500 gal was applied to the shell. The stress and defeomation of the shell were studied in detail. A three-stages collapse mechanism “double-diagonal -members-failure-belt” of this type of structure was discovered. Based on the analysis results, the measures to mitigate collapse of this type of structure is recomanded.

A rehabilitation technique for asphalt pavements with geosynthetic is the application of impregnated nonwoven geotextiles between deteriorated and new asphalt overlays. The performance investigation of impregnated geotextiles proves that they are enhancing in mechanical and hydraulic properties. Although, the installation process may cause severe impacts on these materials’ performance. During the installation, the geotextile suffers damage due to the traffic of high load vehicles, as compactors and pavers, and the friction with granular materials found under its layer or poured above it. This paper aims to investigate how the damage caused by granular materials on nonwoven geotextiles impregnated with different asphalt emulsions effect on their strength resistance and permittivity. From two types of nonwoven geotextiles: polypropylene and polyethylene terephthalate, the comparison uses geotextiles in three conditions: not impregnated, impregnated with asphalt emulsion of rapid setting, and impregnated with asphalt emulsion changed by an elastomeric polymer. Part of the samples followed the damage according to ISO 10722 procedure, placed between three different scenarios of granular materials, applying gravel, sand, and clay. After the damage process, the samples were submitted to mechanical and hydraulic properties evaluations.

As a medical student (Granada University Medical School, Spain), interested in Pediatrics, expended countless hours at the hospital pediatric facilities and got to know many of the children and their medical problems. A particular case, still vivid on my mind, awaken my scientific curiosity. One day, walking and talking with a seven years old child he unexpectedly felt down unconscious with multiple, incontrollable and erratic muscular contractions involving face, body and extremities and salivating. I was overwhelmed thinking it was the child’ last hour. At the time, my knowledge of epilepsy was nil. Following the seizures, the child was up, talking and walking with me as if nothing has happened and without any knowledge of the event. What could have caused the brain motor cortex to suddenly discharge that amount of altered activity causing generalized and erratic muscular contractions remains inexplicable. I migrated to USA, become a Pediatric (Developmental) Pathologist and Director of the Pediatrics Autopsy Service (1962-1999) at the Dartmouth-Hitchcock Medical Center, New Hampshire. I carried out countless postmortem studied of children brains, normal (unaltered) as well as those altered by hemorrhagic, hypoxic-ischemic and/or traumatic damage. With an NIH Fellowship, I spend one year (1967-68) at the Cajal Institute (Madrid, Spain) studying Cajal’ old Golgi preparations and learning about the method. Some of my Golgi studies of children’ brains have been published: The Human Brain. Prenatal Development and Structure, Springer, Heidelberg, Germany, 2012. The present monograph explores the developmental neuropathology of selected perinatal cortical injuries through their acute, subacute and chronic stages. Including: a) how an altered neuronal activity evolves in a damaged cortical region; b) how it moves through the cortex (epileptic auras); and c) how it reaches the motor cortex to be discharged as erratic and incontrollable muscular contractions. Understanding these processes should provide insights into the pathogenesis of epilepsy secondary to perinatal brain damage.

Rapid Visual Screening (RVS) is a procedure that estimates structural scores for buildings and prioritize their retrofit and upgrade requirements. Despite the speed and simplicity of RVS, many of the collected parameters are non-commensurable and include subjectivity due to visual observations. It might cause uncertainties in the evaluation, which emphasizes the use of a fuzzy-based method. This study aims to propose a novel RVS methodology based on the interval type-2 fuzzy logic system (IT2FLS) to set the priority of vulnerable building to undergo detailed assessment while covering uncertainties and minimizing their effects during evaluation. The proposed method estimates the vulnerability of a building, in terms of Visual Damage Index, considering the number of stories, age of building, plan irregularity, vertical irregularity, building quality, and peak ground velocity, as inputs with a single output variable. Applicability of the proposed method has been investigated using a post-earthquake damage database of 28 reinforced concrete buildings from the Bingöl earthquake in Turkey.

Genes that affect adaptive traits have been identified, but our knowledge of the genetic basis of adaptation in a more general sense (across multiple traits) remains limited. We combined population-genomic analyses of evolve and resequence experiments, genome-wide association mapping of performance traits, and analyses of gene expression to fill this knowledge gap, and shed light on the genomics of adaptation to a marginal host (lentil) by the seed beetle Callosobruchus maculatus. Using population-genomic approaches, we detected modest parallelism in allele frequency change across replicate lines during adaptation to lentil. Mapping populations derived from each lentil-adapted line revealed a polygenic basis for two host-specific performance traits (weight and development time), which had low to modest heritabilities. We found less evidence of parallelism in genotype-phenotype associations across these lines than in allele frequency changes during the experiments. Differential gene expression caused by differences in recent evolutionary history exceeded that caused by immediate rearing host. Together, the three genomic data sets suggest that genes affecting traits other than weight and development time are likely to be the main causes of parallel evolution, and that detoxification genes (especially cytochrome P450s and beta-glucosidase) could be especially important for colonization of lentil by C. maculatus.

Aedes aegypti mosquitoes are primary vectors of dengue, yellow fever, chikungunya and Zika viruses. Ae. aegypti is highly anthropophilic and relies nearly exclusively on human blood meals and habitats for reproduction. Socioeconomic factors may influence the spread of Ae. aegypti due to its close relationship with humans. This paper describes and summarizes the published literature on how socioeconomic variables influence the distribution of Ae. aegypti mosquitoes in the mainland United States. A comprehensive search of PubMed/Medline, Scopus, Web of Science, and EBSCO Academic Search Complete through June 12, 2019 was used to retrieve all articles published in English on the association of socioeconomic factors and the distribution of Ae. aegypti mosquitoes. Additionally, a hand search of mosquito control association websites was conducted in an attempt to identify relevant grey literature. Articles were screened for eligibility using the process described in the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Initially, 3,493 articles were identified through the database searches and previously known literature. After checking for duplicates, 2,145 articles remained. 570 additional records were identified through the grey literature search for a total of 2,715 articles. These articles were screened for eligibility using their titles and abstracts, and 2,677 articles were excluded for not meeting the eligibility criteria. Finally, the full text for each of the remaining articles (n = 38) was read to determine eligibility. Through this screening process, 11 articles were identified for inclusion in this review. The findings for these 11 studies revealed inconsistent relationships between the studied socioeconomic factors and the distribution and abundance of Ae. aegypti. The findings of this review suggest a gap in the literature and understanding of the influence of anthropogenic factors on the distribution of Ae. aegypti that could hinder efforts to implement effective public health prevention and control strategies should a disease outbreak occur.

With ongoing colony losses driven in part by the Varroa mite and the associated exacerbation of virus load, there is an urgent need to protect honey bees (Apis mellifera) from fatal levels of virus infection and from nontarget effects of insecticides used in agricultural settings. A continuously replicating cell line derived from the honey bee would provide a valuable tool for study of molecular mechanisms of virus – host interaction, for screening of antiviral agents for potential use within the hive, and for assessment of the risk of current and candidate insecticides to the honey bee. However, the establishment of a continuously replicating, honey bee cell line has proved challenging. Here we provide an overview of attempts to establish primary and continuously replicating hymenopteran cell lines, methods (including recent results) for establishing honey bee cell lines, challenges associated with the presence of latent viruses (especially Deformed wing virus), in established cell lines and methods to establish virus-free cell lines. We also describe the potential use of honey bee cell lines in conjunction with infectious clones of honey bee viruses for examination of fundamental virology.

In this research paper, change detection based methods were considered to find collapsed and intact buildings using radar remote sensing data or radar imageries. Main task of this research paper is collection of most relevant scientific research in field of building damage assessment using radar remote sensing data. Several methods are selected and presented as best methods in present time, there are methods with using interferometric coherence, backscattering coefficients in different spatial resolution. In conclusion, methods are given in end, which show, which methods and radar remote sensing data give more accuracy and more available for building damage assessment. Low resolution Sentinel-1A/B radar remote sensing data are recomended as free available for monitoring of destruction degree in microdistrict level. Change detection and texture based method are used together to increase overall accuracy. Homogeneity and Dissimilarity GLCM texture parameters found as better for separation of a collapsed and intact buildings. Dual polarization (VV,VH) backscattering coefficients and coherence coefficients (before earthquake and coseismic) were fully utilized for this study. There were defined the better multi variable for supervised classification of none building, damaged and intact buildings features in urban areas. In this work, we were achieved overall accuracy 0.77, producer’s accuracy for none building is 0.84, for damaged building case 0.85, for intact building 0.64. Amatrice town was chosen as most damaged from 2016 Central Italy Earthquake.

Nigella sativa (NS) is an effective medicinal plant possessing noteworthy antioxidant property. In NS, there are more than hundred phyto-chemicals reported, out of which thymoquinone is the utmost active phyto-constituent having sturdy antioxidative property. Thymoquinone is a cyclicdione, when reacts with sodium azide, converts into α-azido ketones i.e its analogs which are handy with extensive range of reactions. Sodium azide induces stress in plants thereby, modulating the antioxidant system. The present investigation was planned to elucidate the effect of sodium azide at different concentrations (5µM, 10µM, 20µM, 50µM, 100µM and 200µM) on its secondary metabolites (mainly thymoquinone) in NS callus culture extract (NSE). The results showed sodium azide effect on thymoquinone content and a concentration dependent boost in antioxidant property. It was also observed that thymoquinone content and percent yield (analyzed by RP-HPLC; Reverse Phase- High Performance Liquid Chromatography) were minimum (0.033±0.006% and 0.420±0.045%, respectively) at 200 µM sodium azide used. Whereas, antioxidant activity (analyzed by DPPH; 2, 2-diphenyl-1-picrylhydrazyl) was found to be maximum (3.873±0.402%) at same dose. Further, analysis was done for inhibition of oxidative DNA damage at different concentrations of sodium azide on NSE, maximum inhibition of DNA damage (0.243±0.017%) was found at 200 µM concentration of sodium azide. When correlated, strong positive correlation was observed between percent yield and percent thymoquinone, antioxidant property and inhibition of DNA damage. Whereas, strong negative correlation was observed between percent yield and antioxidant property, percent thymoquinone and antioxidant property, percent thymoquinone and inhibition of DNA damage. The findings evidently point out that the content of thymoquinone, antioxidant property and inhibition of DNA damage was affected by sodium azide.

Translation is spatiotemporally regulated and ER-associated mRNAs are generally in efficient translation. It is unclear whether the ER-associated mRNAs are deadenylated or degraded on the ER surface in situ or in the cytosol. Here, we showed that ER possessed active deadenylases, particularly the poly(A)-specific ribonuclease (PARN), in common cell lines and mouse tissues. Consistently, purified recombinant PARN exhibited a strong ability to insert into the Langmuir monolayer and liposome. ER-anchored PARN was found to be able to reshape the poly(A) length profile of the ER-associated RNAs by suppressing long poly(A) tails without significantly influencing the cytosolic RNAs. The shortening of long poly(A) tails did not affect global translation efficiency, suggesting that the non-specific action of PARN towards long poly(A) tails was beyond the scope of translation regulation on the ER surface. Transcriptome sequencing analysis indicated that the ER-anchored PARN trigged the degradation of a small subset of ER-enriched transcripts. The ER-anchored PARN modulated the translation of its targets by redistributing ribosomes to heavy polysomes, suggesting that PARN may play a role in dynamic ribosome reallocation. During DNA damage response, MK2 phosphorylated PARN-Ser557 to modulate PARN translocation from the ER to cytosol. By promoting the decay of ER-associated MDM2 transcripts with low ribosome occupancy, the ER-anchored PARN modulated DNA damage response and thereby cell viability. These findings revealed that a highly regulated communication between mRNA degradation rate and translation efficiency is present on the ER surface in situ and that PARN may contribute to this communication by modulating the dynamic ribosome reallocation between transcripts with low and high ribosome occupancies.

The loss of integrity and adverse effect on mechanical properties can be concluded as attributing miro/macro-mechanics damage in structures, especially in composite structures. Damage as a progressive degradation of material continuity in engineering predictions for any aspects of initiation and propagation requires to be identified by a trustworthy mechanism to guarantee the safety of structures. Besides the materials design, structural integrity and health are usually prone to be monitored clearly. One of the most powerful methods for the detection of damage is machine learning (ML). This paper presents the state of the art of ML methods and their applications in structural damage and prediction. Popular ML methods are identified and the performance and future trends are discussed.

Diffuse intrinsic pontine glioma (DIPG) is an aggressive pediatric brainstem tumor with a 5-year survival of <1%. Up to 80% of DIPG tumors contain a specific K27M mutation in one of two genes encoding histone H3 (H3K27M). Furthermore, p53 mutations found in >70-80% of H3K27M DIPG, and mutant p53 status is associated with a decreased response to radiation treatment and worse overall prognosis. Recent evidence indicates that H3K27M mutation disrupts tri-methylation at H3K27 leading to aberrant gene expression. Jumonji family histone demethylases collaborates with H3K27 mutation in DIPG by erasing H3K27 trimethylation and thus contributing to derepression of genes involved in tumorigenesis. Since the first line treatment for pediatric DIPG is fractionated radiation, we investigated the effects of Jumonji demethylase inhibition with GSK-J4, and mutant p53 targeting/oxidative stress induction with APR-246, on radio-sensitization of human H3K27M DIPG cells. Both APR-246 and GSK-J4 displayed growth inhibitory effects as single agents in H3K27M DIPG cells. Furthermore, both of these agents elicited mild radiosensitizing effects in human DIPG cells (sensitizer enhancement ratios (SERs) of 1.12 and 1.35, respectively; p<0.05). Strikingly, a combination of APR-246 and GSK-J4 displayed a significant enhancement of radiosensitization, with SER of 1.50 (p<0.05) at sub-micro-molar concentrations of the drugs (0.5 μM). The molecular mechanism of the observed radiosensitization appears to involve DNA damage repair deficiency triggered by APR-246/GSK-J4, leading to the induction of apoptotic cell death. Thus, a therapeutic approach of combined targeting of mutant p53, oxidative stress induction, and Jumonji demethylase inhibition with radiation in DIPG warrants further investigation.

Fatigue in any material is a result of continuous irreversible degradation process. Traditionally, fatigue life is predicted by extrapolating experimentally curve fitted empirical models. In the current study, unified mechanics theory is used to predict fatigue life of Ti-6Al-4V under monotonic tensile, compressive and cyclic load conditions. The unified mechanics theory is used to derive constitutive model for fatigue life prediction using a three-dimensional computational model. The proposed analytical and computational models have been used to predict the low cycle fatigue life of Ti-6Al-4V alloys. It is shown that the unified mechanics theory can be used to predict fatigue life of Ti-6Al-4V alloys by using simple predictive models that are based on fundamental equation of the material, which is based on thermodynamics associated with degradation of materials.

Biological control is widely successful for controlling pests, but effective biocontrol agents are now more difficult to obtain due to more restrictive international trade laws. Coupled with increasing demand, the efficacy of existing and new biocontrol agents needs to be improved with genetic and genomic approaches. Although they have been underutilised in the past, applying genetic and genomic techniques is becoming more feasible from both technological and economic perspectives. We review current methods and provide a framework for using them, incorporating evolutionary and ecological principles. First, it is necessary to identify which biocontrol trait to select and in what direction. Next, the genes or markers linked to these traits need be determined to better target their selection, followed by how to implement this information into a breeding program. Choosing a trait can be assisted by modelling to account for the proper agro-ecological context, and by knowing which traits have sufficiently high heritability values. We provide guidelines for designing genomic strategies in biocontrol programs, which depends on the organism, budget, and desired objective. Genomic approaches start with genome sequencing and assembly. We provide a guide for deciding the most successful sequencing strategy for biocontrol agents. Gene discovery involves quantitative trait loci (QTL) analyses, transcriptomic and proteomic studies, and gene editing. Improving biocontrol practices include marker-assisted selection, genomic selection and microbiome manipulation of biocontrol agents, and monitoring for genetic variation during rearing and post-release. We conclude by identifying the most promising applications of genetic and genomic methods to improve biological control efficacy.

The formation of high-melting-point Cu₆Sn₅ interconnections is crucial to overcome the collapse of Sn-based micro-bumps and produce reliable intermetallic interconnections in three-dimensional (3D) package. However, because of the multiple reflows in 3D package manufacturing, Cu₆Sn₅ interconnections will experience the cyclic polymorphic transitions in the solid state. The repeated and abrupt change in the Cu₆Sn₅ lattice due to the cyclic polymorphic transitions can cause extreme strain oscillations, producing damages at the surface and in the interior of the Cu₆Sn₅ matrix. Moreover, because of the polymorphic-transition-induced grain splitting and superstructure phase formation, the reliability of Cu₆Sn₅ interconnections will thus face great challenges in 3D package. In addition, the Cu₆Sn₅ polymorphic transition is structure-dependent, and the η′↔η polymorphic transition will occur at the surface while the η′↔ηs↔η polymorphic transition will occur in the deep matrix. Our results can provide in-depth understandings of structural evolution and damage mechanism of Cu₆Sn₅ interconnections in real 3D package manufacturing.

We presented here the first draft genome sequence of the trypanosomatid Herpetomonas muscarum ingenoplastis. This parasite was isolated repeatedly in the black blowfly, Phormia regina. This is the first draft genome of a flagellate from the phylogenetically distinct clade of Trypanosomatidae.

We analyze damage propagation modeling of turbo-engines in a data-driven approach. We investigate subspace tracking assuming a low dimensional manifold structure and a static behavior during the healthy state of the machines. Our damage propagation model is based on the deviation of the data from the static behavior and uses the notion of health index as a measure of the condition. Hence, we incorporate condition-based maintenance and estimate the remaining useful life based on the current and previous health indexes. This paper proposes an algorithm that adapts well to the dynamics of the data and underlying system, and reduces the computational complexity by utilizing the low dimensional manifold structure of the data. A significant performance improvement is demonstrated over existing methods by using the proposed algorithm on CMAPSS Turbo-engine datasets.

Adaptive radiations occur mostly in response to environmental variation through the evolution of key eco-morphological innovations that allow emerging species to occupy new ecological niches. However, rapid phenotypic evolution and the evolution of key novelties are likely to also occur when a couple or few species are engaged into narrow ecological interactions. To demonstrate coevolution is a difficult task; only elusive evidences confirm that coevolution is a driver of speciation and diversification. Here we propose that the adaptive radiation of the Mediterranean orchid genus Ophrys, which gave rise to ca. 350 species since the apparition of the genus is due to the particular co-evolutionary dynamics between these plants and their pollinators. We suggest that the pollination by sexual swindle used by Ophrys orchids is the main driver of this coevolution. Flowers of each Ophrys species mimic sexually receptive females of one particular insect species, mainly bees. Male bees are attracted by pseudo-pheromones emitted by Ophrys flowers that are similar to the sexual pheromones of their females. Males lured by the flower shape, color and hairiness attempt to copulate with the flower, which glues pollen on their bodies. Pollen is eventually transferred to the stigma of another flower of the same Ophrys species during similar copulation attempts. Three observations led us to propose the scenario of an asymmetric co-evolutionary relationship between Ophrys and their pollinators. Firstly, there is a strong intra-specific competition among Ophrys individuals for the attraction of their species-specific pollinators, which is due to the high learning and memorization abilities of bees that record the pheromone signatures of kin or of previously courted partner to avoid (further) copulation attempts. Mnemonic pollinators induce thus a strong selective pressure for variation in the pseudo-pheromones emitted by individual flowers, which will potentially generate shifts in pollinator species, and hence Ophrys speciation. These pollinator shifts are adaptive for new Ophrys species because they may benefit from a competitor-free space. Secondly, such shifts in pollinator species are due to the random crossing of peaks in the olfactory landscape of the pollinator guild that is syntopic to each particular Ophrys population. This selective process on individual, random variation in pseudo-pheromone bouquets is followed by directional selection on flower phenotypes that will reinforce the attraction of the new pollinator. Thirdly, pollinators use the pseudo-pheromones emitted by Ophrys to locate suitable habitats from a distance within complex landscapes. Pollinators stay fixed for a while in these habitats by the local diversity of pseudo-pheromones, which increases their probability of encounter with a receptive female and hence the reproduction probability of both sexes. Conversely, pollinators disperse out of small suitable habitats once they have memorized the local diversity of sexual pseudo-pheromone bouquet or if fecundated Ophrys flowers repel pollinators, which decreases the probability of geitonogamy (plant advantage) but limit pollinator mating with locally emergent insect females, thus limiting inbreeding and favoring gene flow (pollinator advantage). Finally, we propose several research avenues that emerged according to this scenario of adaptive radiation by assymetric coevolution between Ophrys species and their pollinators.

Epoxy asphalt (EA) concrete is widely used in constructing long-span steel bridge pavements (SBDPs). This study aims to derive a fatigue damage evolution law, conducting an experimental investigation of SBDP. First, a general theoretical form of the fatigue damage evolution law of materials is established based on the thermal motion of atoms. Then, fatigue experiments demonstrate that this evolution law well represents the known damage–life relationships of SBDP. Taking into account the experimental relationships between damage and fatigue life under symmetrical cyclic loadings with different overload amplitudes and temperature variations, a detailed damage evolution law is deduced. Finally, the role of damage accumulation is discussed on the basis of the proposed damage evolution law for the extreme situation of heavy overload and severe environments. The results show that both heavy loading and falling temperatures increase the fatigue damage of SBDP considerably; therefore, SBDP should avoid heavy loading combined with winter temperatures. EA shows a fatigue life two to three times longer than that of modified matrix asphalt (SMA) or guss asphalt (GA). For the same thickness, EA pavement is demonstrated to be more suitable for an anti-fatigue design of large-span SBDP under high traffic flows and low temperatures.

Direct laser writing based on non-linear 3D nanolithography (also known as 3D laser lithography, 3DLL) is a powerful technology to manufacture polymeric micro-optical components. However, practical applications of these elements are limited due to the lack of knowledge of their optical resilience and durability. In this work, we employ 3DLL for the fabrication of bulk (i.e. fully filled) and woodpile structures out of different photopolymers. We then characterize them using S-on-1 laser induced damage threshold (LIDT) measurements. In this way, quantitative data of LIDT values can be collected. Furthermore, this method permits to gather damage morphologies. The results presented in this work demonstrate that LIDT values depend on the material and the geometry of the structure. Bulk non-photosensitized hybrid organic-inorganic photopolymer SZ2080 structures are found to be the most resilient with a damage threshold being of 169±15 mJ/cm².

In this paper, the methodology using Insect Intelligent Building (I^2B) technology for establishing energy consumption monitoring system of public buildings is prevailed. The computing process node and distributed algorithm are utilized to implement the energy consumption collection and data transmission and data pre-processing. Taking a commercial building as a case study, CPNs are applied to set up the building energy consumption monitoring system, with the Spanning Tree Algorithm for generating network topology，and BPNN method for solving abnormal data and recovering missing data. The research results demonstrate the proposed method can effectively improve the performance of plug-and-play and self-identified and self-configuration of energy consumption monitoring system.

This article proposes a monitoring system that allows to track transitions between different stages in the berry harvesting process (berry picking, waiting for transport, transport, and arrival to the packing) solely using information from temperature and vibration sensors located in the basket. The monitoring system assumes a characterization of the process based on Hidden Markov Models and uses the Viterbi algorithm to perform inference and estimate the most likely state trajectory. The obtained state trajectory estimate is then used to compute a potential damage indicator in real-time. The proposed methodology does not require information about the weight of the basket to identify each of the different stages, which makes it effective and more efficient than other alternatives available in the industry.

Mining can impact the environment, biodiversity and human health through direct and indirect practices. This study investigated the effects of gold mining on Gerbillus nanus, pointing to organ dysfunction and redox imbalance. Soil samples, Lycium shawii and G. nanus were collected from a site near a mining planet and a control site. Soil and L. shawii samples from the mining site showed a significant increase cadmium (Cd), cupper (Cu), mercury (Hg), arsenic (As), zinc (Zn), lead (Pb) and vanadium (V). Hepatic, renal and pulmonary Cd, Pb, Hg, Zn, Cu, Fe, As and V concentrations were increased significantly in G. nanus at the mining site. Markers of liver and kidney function were elevated in serum, and several histological manifestations were demonstrated in liver, kidney and lung of G. nanus at the mining site. Malondialdehyde and nitric oxide were increased, and glutathione and antioxidant enzyme were declined in the liver and kidney of G. nanus. In conclusion, mining practices triggered tissue damage and oxidative stress in G. nanus living close to the mining site. These findings can represent the scientific basis for evaluating the environmental and health impact of mining in the on the nearby communities.

Targeted enrichment of ultraconserved elements (UCE) has emerged as a promising tool for inferring evolutionary history in many taxa, with utility ranging from phylogenetic and phylogeographic questions at deep time scales to population level studies at shallow time scales. However, the methodology can be daunting for beginners. Our goal is to introduce UCE phylogenomics to a wider audience by summarizing recent advances in arthropod research, and to familiarize readers with background theory and steps involved. We define terminology used in association with the UCE approach, evaluate current laboratory and bioinformatic methods and limitations, and, finally, provide a roadmap of steps in the UCE pipeline to assist phylogeneticists in making informed decisions as they employ this powerful tool. By facilitating increased adoption of UCE in phylogenomics studies that deepen our comprehension of the function of these markers across widely divergent taxa, we aim to ultimately improve understanding of the arthropod tree of life.

Unlike electron microscopy, which can achieve very high resolutions, but to date can only be used to study static structures, time-resolved X-ray diffraction from contracting muscles can, in principle, be used to follow the molecular movements involved in force generation on a millisecond timescale albeit at moderate resolution. However, previous X-ray diffraction studies of resting muscles have come up with structures for the head arrangements in resting myosin filaments that are different from the apparently ubiquitous interacting heads motif (IHM) found by single particle analysis of electron micrographs of isolated myosin filaments from a variety of muscle types. This head organization is supposed to represent the super-relaxed state of the myosin filaments where ATP usage is minimized. Here we have tested whether the interacting heads motif structures will satisfactorily explain the observed low-angle X-ray diffraction patterns from resting vertebrate (bony fish) and invertebrate (insect flight) muscles. We find that the interacting heads motif does not, in fact, explain what is observed. Previous X-ray models fit the observations much better. We conclude that the X-ray diffraction evidence has been well interpreted in the past and that there is more than one ordered myosin head state in resting muscle. There is, therefore, no reason to question some of the previous X-ray diffraction results on myosin filaments; time-resolved X-ray diffraction should be a reliable way to follow crossbridge action in active muscle and may be one of the few ways to follow molecular changes in myosin heads on a millisecond timescale as force is actually produced.

The evaluation of geometric defects is necessary in order to maintain the integrity of structures over time. These assessments are designed to detect damages of structures and ideally help inspectors to estimate the remaining life of structures. Current methodologies for monitoring structural systems, while providing useful information about the current state of a structure, are limited in the monitoring of defects over time and in linking them to predictive simulation. This paper presents a new approach to the predictive modeling of geometric defects. A combination of segmented from point clouds are parametrized using the convex hull algorithm to extract features from detected defects, and a stochastic dynamic model is then adapted to these features to model the evolution of the hull over time. Describing a defect in terms of its parameterized hull enables consistent temporal tracking for predictive purposes, while implicitly reducing data dimensionality and complexity as well. In this study, 2D point clouds analogous to information derived from point clouds were first generated over simulated life-cycles. The evolutions of point cloud hull parameterizations were modeled as stochastic dynamical processes via autoregressive integrated moving average (ARIMA) and vectorized autoregression (VAR) and compared against ground truth. The results indicate that this convex hull approach provides consistent and accurate representations of defect evolution across a range of defect topologies and is reasonably robust to noisy measurements, however assumptions regarding the underlying dynamical process play a significant the role in predictive accuracy. The results were then validated on experimental data from fatigue testing with high accuracy. Longer term, the results of this work will support finite element model updating for predictive analysis of structural capacity.