In this paper, a thermodynamic investigation is done on a Kalina-flash cycle. This work is initially validated with the Kalina cycle power plant, Wich is commissioned in Husavic. Low-temperature Kalina-flash is considered for this study. This cycle is working with the ammonia-water mixture. The Kalina-flash cycle was optimized in the view of exergy and thermal efficiency. A multi-objective genetic algorithm is used to accomplish optimization. The optimum values of the objective functions are observed to be 40.20 and 11.70% respectively. At last, The influence of the separator inlet dryness fraction, basic ammonia mass fraction, temperature and flash pressure ratio on the first and second law efficiencies are analysed.

We investigate the performance of a novel flat photovoltaic-thermal (PV-T) module under high-vacuum through a 1D numerical model based on steady-state energy balance, with the aims of optimizing the simultaneous production of thermal and electrical energy. In the proposed design, the photovoltaic (PV) cell is positioned directly above the selective solar absorber (SSA), in a multilayer or fully integrated PV-SSA structure, which allows full exploitation of spectral solar radiation. In fact, in this configuration the losses related to non-absorption of low-energy photons and thermalization, typical of a classical single-junction PV cell, are reduced. The present study is conducted as the emittance and energy bandgap of the PV layer varied, thus admitting a wide variety of materials into the analysis. The dependence of the temperature coefficient, β(%/K), on the energy bandgap of the PV cell is also included. In the last part of the work, we discuss the performance of the proposed evacuated PV-T equipped with a SSA layer and thin film solar cells, namely those made of CdTe, CdS and GaAs. Overall, the paper highlights the great advantage of using high vacuum insulation, which suppresses conductive losses, and the versatility of the proposed system, which could be adapted to the user's needs simply by choosing the appropriate material for the photovoltaic layer.

The study focused on the technical and scale efficiency of smallholder pineapple farmers in the Central Region of Ghana. The input-oriented Data Envelopment Analysis (DEA) was used to estimate technical, pure and scale efficiencies of the smallholder pineapple farmers, of which a random sampling procedure was used to select 320 respondents. The study revealed that the farmers were technically inefficient with mean technical efficiency under Constant Returns to Scale (CRS), pure efficiency under Variable Returns to Scale (VRS) and the Scale Efficiency levels of 0.505, 0.641 and 0.772, respectively, due to farmers’ inability to exploit fully the available technology while experiencing evident post-harvest losses resulting from low adoption of post-harvest technologies. Such findings are meaningful and could help the farming communities and relevant policymakers to understand the issues in farming production and hence undertake necessary actions to potentially improve farmers’ technical and scale efficiencies in the study area.

This study measures the technical and scale efficiency of Micro and Small Enterprises (MSEs) and input slacks using Data Envelop Analysis (DEA) model and identifies the determinants of efficiencies of MSEs by employing ordinary least square (OLS) econometrics model. A sample of 375 randomly selected MESs are included in the study. The study found that the average technical and scale efficiency of MSEs are relatively low; technical efficiency averaged at 30 percent and 38.4 percent under constant returns to scale (CRS) and variable returns to scale (VRS) assumptions, respectively. Besides, the overall average scale efficiency score of MSEs was estimated at 77.8 percent. The highest mean technical and scale efficiencies were registered in the construction (71.8 percent) and manufacturing (85.7 percent) sectors, respectively. Whereas, the lowest technical and scale efficiency goes to urban agriculture sector and service sector, with 38.9 percent and 67.2 percent, respectively. The level of inputs, enterprise age and sector, human capital, labor productivity variables significantly affect relative technical efficiency level of MSEs with different directions while variables such as start-up capital, gender of the enterprise manager and availability of support from the government identified statistically not significant in determining the MSEs’ technical efficiency.

Climate change, the scarcity of fossil fuels, technical advances in clean energy, and the volatility of crude oil prices are just a few of the factors that have prompted the world to recognize clean energy as a viable alternative to dirty energy. As part of the Paris Climate Accord of 2015, many countries agreed to change their economies to be more sensitive to climate change. Due to this Accord, which increased interest from investors and decision-makers, investments in clean energy companies have benefited [1,2]. Clean energy stocks, which are a part of the larger world of tradable reserves, might experience pricing inefficiencies. In this paper, we investigate the multifractal scaling behavior and efficiency of green finance markets, as well as traditional markets like gold, crude oil, and natural gas between January 1, 2018, and March 9, 2023, which covers periods of low volatility and financial instability (2020 and 2022 events). To test the serial dependency (autocorrelation) and the efficient market hypothesis, in its weak form, we employed the Lo and Mackinlay test and the DFA method. The empirical findings demonstrated that both periods exhibit severe multifractal and significant asymmetry, indicating that the price indices under study are not at all efficient.

Greenhouses are instrumental in the advancement of regions globally. The geometric arrangement of these structures plays a pivotal role in governing sunlight distribution, facilitating ventilation, and managing condensation. The roof's shape significantly affects energy efficiency and the accumulation of condensation water, which, when dripping onto crops, can induce diseases and diminish production. This study introduces a Matlab program designed for defining and analyzing greenhouse roof geometry, adaptable to both single-span and multi-span structures. Various roof shapes are examined, determining angles along their length to facilitate condensation droplet runoff. Furthermore, the greenhouse's energy efficiency is evaluated by analyzing diverse roof models, accounting for surface area and internal air volume. The results aim to aid in selecting the optimal greenhouse type based on climate and latitude. This study offers a valuable decision-making tool for the planning and design of agricultural structures, providing insights to enhance overall sustainability and performance in diverse environmental contexts.

Efficiency serves as a crucial metric in assessing the advancement of scientific research for universities. Reasonable inputs of human resources, finances, materials, and other resources, along with high-quality research output, are important guarantees for the research efficiency of Chinese universities. This study delves into the patterns of changes of research efficiency among universities across the 31 provinces and municipalities of China from 2012 to 2022. By scrutinizing input-output perspectives and utilizing data sourced from the China Statistical Yearbook, the analysis unveils prevailing scenarios of input redundancy and output insufficiency in research efficiency across universities. The static and dynamic trends in research efficiency were further investigated by employing a static non-parametric Data Envelopment Analysis (DEA)-BCC model and a dynamic Malmquist index. Key findings from the analysis from 2012 to 2022 include: (1) notable growth in investments in teaching, research equipment assets, and research and development funds among nationwide universities; (2) a steady increase in the mean value of technical efficiency (TE) from 0.97 to 0.99, indicating continuous enhancement in overall efficiency in research input resource allocation across the provinces; (3) the mean Malmquist productivity index of 1.285, with an average annual increase of 28.5%, signifying a consistent improvement in university research efficiency throughout the study period; and (4) the provinces experiencing varying degrees of input redundancy or output insufficiency were selected to suggest the need for tailored strategies in resource allocation. The study underscores the importance of a holistic evaluation system involving stakeholders from government, universities, and society to optimize research efficiency and promote scientific innovation and social development.

Abstract: Peptide pools composed of short amino acid sequences have proven to be versatile tools in various research areas and clinical applications. They are powerful tools for epitope mapping, immunotherapy, and vaccine development. Their importance lies in their ability to map complex protein structures, enabling a comprehensive understanding of immune responses and facilitating the identification of potential therapeutic agents. The application of peptide pools also extends to the field of personalized medicine, offering tailored solutions for diseases such as cancer and infectious diseases. Peptide pools are complex mixtures of immunostimulatory antigens primarily intended for T-cell stimulation. They are commercially available in many different compositions and variants. However, unlike other reagents that consist of only one or a few compounds, peptide pools are highly complex products with limited stability. This makes their quality control a major challenge. Quantitative peptide analysis usually requires sophisticated methods, in most cases isotope-labeled standards and reference materials. None of these are routinely available for these products. Synthesis and purification of all labeled peptides might be required. Usually, this approach would be prohibitively laborious and expensive. Therefore, an approach is needed to provide a practical and feasible method for quality control of peptide pools. With insufficient quality control, the use of such products could lead to incorrect experimental results, which would worsen the well-known reproducibility crisis in the biomedical sciences. Here we propose the use of ultra-high performance liquid chromatography (UHPLC) with two detectors, a standard UV detector (at 214 nm) for quantitative analysis and a high-resolution mass spectrometer (HRMS) for identity confirmation. To be cost-efficient and fast, quantification and identification are performed in one chromatographic run. An optimized protocol is shown, and different peak integration methods are compared and discussed. This work was performed using a peptide pool known as CEF, which consists of 32 peptides derived from cytomegalovirus (CMV), Epstein-Barr virus (EBV) and influenza virus, ranging from 8 to 12 amino acids in length.

Device-to-device (D2D) communication is an essential part of the future fifth generation (5G) system that can be seen as “network of networks”, consisting of multiple seamlessly integrated radio access technologies (RATs). Public safety communications, autonomous driving, social-aware networking, and infotainment services are example use cases of D2D technology. High data rate communications and use of several active air interfaces in the described network create energy consumption challenges for both base stations and the end user devices. In this paper, we review the status of 3GPP standardization and define a set of application scenarios. We use the recent models of 3GPP Long Term Evolution (LTE) and WiFi interfaces in analyzing the power consumption both from the infrastructure and user device perspectives. The results indicate that the number of active interfaces should be minimized.

To sustain and advance the development of our laboratory, it is imperative for the laboratory 1 personnel to consistently deliver high-quality products and services that meet customer expectations. 2 The progress of productivity and the pace of technological advancements result in constant evolution 3 of measurement procedures, analytical techniques, and overall work methods. Our research within 4 the Neutron Activation Analysis (NAA) laboratory is aimed at contributing to the establishment of 5 quality assurance that complies with the ISO 17025 standard. As such, the laboratory implements 6 quality-oriented approaches to foster a culture of continuous improvement in its detector operations 7 and enhance customer satisfaction.

In order to meet the national energy saving goals set in the Vietnam National Energy Efficiency Program in the period of 2019 – 2030 (VNEEP), the Vietnamese government has adopted a series solutions and policies to improve energy efficiency. The Vietnam’s 63 provinces will be as main actor for the national achievement in energy efficiency. Thus, understanding the province’s potentiality of energy efficiency is useful for the harmonious and sustainable development between the economy and energy systems. In this study, provincial and national data from General Statistic Office are analyzed in terms of the energy efficiency levels. With the trends of economic development and energy consumption in both national and regional levels, the Lorenz curve between Vietnamese energy consumption and GDP is investigated. The Lorenz coefficient shows the energy allocation is nether reasonable nor balanced. By using clustering method, the 63 provinces of Vietnam clustered into 7 groups that the provinces in the cluster has the similar indexes of energy efficiency i.e. ability, responsibility, potential and difficulty. The energy consumption and GDP are predicted in the period of 2019 – 2025. Based on the difference of GDP development and energy consumption levels, the target of energy efficiency for each province through clustering is set. The results show that 33 provinces included in the cluster 1, 2, 3, 4 and 6 are heavy contribution. Among them, the provinces in the cluster 2 and 3 need to focus on the industry sector in their energy saving policy. The cluster 7 included the under-developed provinces can learn development’s experiences of the provinces in the cluster 1, 2, 3 and 4 to find the best way of their future development.

In this study, the probabilistic exergoeconomic analysis was performed for four industrial gas turbine (GT) units comprising of two (GT16 and GT19) units of 100MW GE engine and two (GT8 and GT12) units of 25MW Hitachi engine at Transcorp Power Limited, Ughelli. These four industrial GT engine units were modelled and simulated using natural gas as fuel. The design point (DP) simulation results of the modelled GT engines were validated with the available DP thermodynamic data from original equipment manufacturer (OEM). This was done before the off-design point (ODP) simulation was carried out which represents the plant operations. The results obtained from exergy analysis at full load operation show that the turbine has the highest exergy efficiency followed by compressor and combustion having the least. For turbines these were 96.13% for GT8 unit, 98.02% for GT12 unit, 96.26% for GT16 unit, and 96.30% for GT19 unit. Moreover, the combustion chamber has the highest exergy destruction efficiency of 55.16% GT8 unit, 56.58% GT12 unit, 43.90% GT16 unit, and 43.30% GT19 unit respectively. The exergy analysis results obtained from the four units show that the combustion chamber (CC) is the most significant exergy destruction with lowest exergy efficiency and highest exergy destruction efficiency of plant components. The exergoeconomic analysis results from four units showed combustion chamber energy destruction cost of 531.08 $/h GT8 unit, 584.53 $/h GT12 unit, 2351.81$/h GT16, and 2315.93$/h GT19 unit. The probabilistic results analysis based on the input parameters distributions evaluated and discussed.

In the intersection of the Internet of Things (IoT) and Machine Learning (ML), the choice between high-level and low-level programming libraries presents a significant dilemma for developers, impacting not only the efficiency and effectiveness of ML models but also their environmental footprint. We have proposed a comprehensive framework to aid in this decision-making process, underpinned by a detailed comparative analysis of both types of libraries on one of the key IoT ML task; image classification. We have introduced a novel algorithm designed to calculate the green footprint of ML model training, factoring in execution time, memory utilization, power consumption, and CPU temperature, addressing the urgent need for sustainable ML practices. Through an empirical evaluation of popular libraries such as PyTorch for high-level and Libtorch for low-level development, we have assessed their performance, development efficiency, and hardware compatibility. The culmination of our research is a decision support system that synthesizes the experimental findings to guide developers toward choices that harmonize model performance with environmental sustainability.

The exponential growth of the agricultural industry in the Amazon region has brought about notable economic advancements. However, this growth has substantially cost the region’s ecosystems, manifesting in increased deforestation and biodiversity degradation within the Amazon forest. This article is dedicated to assessing the eco-efficiency of agricultural production in Amazon biome municipalities. It places particular emphasis on identifying critical determinants through the utilization of the classic Data Envelopment Analysis (DEA) model for efficiency computation, super-efficiency models for distinctive characterization, bootstrap computational techniques for robust resampling, and the Malmquist index for calculating annual eco-efficiency indices of each Decision-Making Unit (DMU). An exploration of the correlation between efficiency and meteorological attributes of the municipalities is conducted. The findings of this study reveal several significant points: 1) Eco-efficient municipalities within the Amazon Biome can serve as benchmarks for other DMUs striving to attain optimal input-output levels. 2) Most municipalities in the Amazon Biome operate closely to the productive frontier due to the prevalent technology employed in their agricultural activities. 2) The nature of the technological frontier’s return suggests that small and large DMUs possess eco-efficiency potential. 4) The current dataset does not yield conclusive evidence regarding a direct correlation between the variables. Leveraging this information, strategic pathways can be formulated to drive economic development in tandem with the sustainability of Amazon Biome municipalities. These strategies promise to foster social, economic, and environmental benefits for the populace while providing valuable insights to inform future research within this thematic domain.

The specialisation and intensification in agriculture have increased the productivity but have also led to the spread of monocultural systems, simplifying production and reducing genetic diversity. The purpose of this study was to propose crop diversification as a tool to increase biodiversity and achieve sustainable and resilient intensive agriculture, particularly in areas with water scarcity. In this paper, a combined Life Cycle Assessment (LCA) and Life Cycle Costing (LCC) was applied to evaluate the environmental and economic sustainability of a differentiated system of cultivation (pomegranate, almond and olive), according to modern intensive and superintensive cropping systems. Based upon the results obtained, it is deduced that pomegranate cultivation generated the highest environmental load, followed by almond and olive. From the financial analysis, it emerged that almond is the most profitable, followed by pomegranate and olive.

The results from laboratory tests and field tests, available in the open literature for over ten years, despite the announcement of high efficiency translating into increased energy efficiency and such significant ecological advantages, have not so far resulted in widespread use of fuel performance catalysts (FPC) on a global scale. Wishing to explain why the above situation occurred and to verify the operation of catalytic additives for fuels; this article presents the results of research on the effect of using catalytic additives for fuel in a brand new diesel engine. The article contains an analysis of the results of exhaust gas emission tests from the Doosan MD196TI engine. During the tests, the engine was fueled with a typical diesel fuel and the same fuel with the a catalyst additive. The catalyst was added to the liquid fuel in the form of a commercially available product distributed by ProOne company under the name FMAX. The research was carried out in the form of a test, much more developed than the approval test on a stationary braking station in accordance with the requirements of ISO 8178. The article is concluded with a comparative analysis of exhaust gas emission results illustrating the effects of a catalyst in the form of reduction of solid particles, carbon monoxide, hydrocarbons and a slight increase in nitrogen oxide emissions. In addition, the effect of the catalyst depends on the product of thermal (brake) efficiency of the engine and the calorific value (CV) of the fuel used.

Innovation and technology are important tools of minerals sector efficiency and productivity im-provement. The uptake of technologies has proven important levelrs to improve the productivity of mining sector. This paper provides a comprehensive analysis of mine-level productivity by using a global data of copper, gold, and platinum from 1991-2020. Various drivers of proioductivity have been analysed to draw policy insights. Empirical findings reveal significant disparities in technical efficiency and productivity across mines and regions. A further decomposition of TFP into its different components suggest that the adoption of innovative practices and investment in technology adoption could improve the overall productivity of these commodities. The findings also suggest that an appropriate input mix and optimal scale of production could boost platinum mining productivity. Regional disparities in productivity in different commodities (e.g., South Africa vs. Zimbabwe) give policymakers with insights into how to support production scale and productivity through appropriate input mixtures.

In the era of Industry 4.0, the focus on optimizing manufacturing processes is crucial. This study provides a comprehensive analysis of the EnPAS system, a proprietary automated control and monitoring tool developed by KAD3, implemented in the production process of Corten steel furnishings - the "Lila" chair and "Line" planter. Designed to enhance operational efficiency, EnPAS facilitates improved workflow by streamlining production stages and reducing downtime. The research design involves a comparative analysis of the workshop's production process, both before and after the implementation of the EnPAS system. Elements such as de-greasing, oxidation, and finishing stages, among others, were examined. The implementation of the EnPAS system led to a significant reduction in the total production time for both products. Further, there was a substantial decrease in waiting time and setup time. These findings unequivocally indicate the transformative impact of the EnPAS system on the manufacturing process, showcasing its potential in driving efficiency improvements, reducing production times, and increasing output. The study underscores the importance of leveraging such advanced control and monitoring tools to optimize modern manufacturing processes and does not exaggerate conclusions not backed by the research.

Overcrowding in the emergency department is a problem that generates several implications for bed management, which is deemed one of a hospital's most critical processes. Effective management of hospital production capacity includes bed management processes, which can be improved in order to leverage hospital performance. Thus, this study sought to understand how bed management works and identify the main factors that influence its management. The study was performed through a case study, with data collected from semi-structured interviews and bibliographic research, which were triangulated. Thematic content analysis of the interviews and cross-analysis were performed. As a result, the main factors that influence hospital Bed management were identified: communication between teams and units; definition of performance goals; decisions shared between units; occupation and discharge planning by the teams; length of stay; the role of the nurses; and COVID-19. The greatest difficulties in the management process are related to these factors. Additionally, suggestions are provided to mitigate such reported difficulties.

Thermal comfort is extremely important in architecture, especially in environments with more people spending longer on studies or intellectual activities. This research describes a case study to investigate university buildings' energy and thermal performance as a part of the ANEEL program. Due to this importance, and the need to save energy in Brazilian public buildings, the ANEEL-the Brazilian Energy Electricity Regulatory Agency, launched 2016 a national program focusing on energy efficiency in public universities around the country. University offices and classrooms require high intellectual effort; thus, environmental comfort is critical for maintaining its users' physical and mental health. This study included a pre-diagnosis of the performance of the envelope, lighting, and air conditioning systems and a survey about the quality of the environments from the users' point of view. The Prescriptive Method of the Brazilian Labeling Program (PBE) for Commercial, Service, and Public Buildings (RTQ-C) assessed the building performance. Statistical analysis was applied to correlate the quality and thermal preference of the users from the PMV/PPD. The results showed a high rate of thermal discomfort in both environments of the studies, even when using air conditioning.

Project portfolio configuration (PPC) is an important approach to maintain the sustainable development of enterprises and achieve organizations’ strategy. However, the synergetic efficacy of PPC which determines the degree of the project's strategic objectives achieved is a fuzzy problem and hard to be measured. To solve this problem, this paper takes the data envelopment analysis (DEA) as the tool to measure the efficacy of PPC under deterministic conditions. First, a portfolio evaluation index system which takes financial indicators and non-financial indicators into consideration is developed based on the review of the literature; Second, an evaluation model based on DEA is built to reduce the number of decision making-unit with the perspective of synergetic theory; Then, a computational experiment is studied to verify the feasibility of this proposed model. The results of this computational experiment show that this model can effectively narrow scope of decision-making, improve the decision-making level and provide a reference to decide the DEA effective project portfolio decision-making unit. To our knowledge, this study is the first time to apply the notion of synergetic efficacy and DEA to the PPC domain. It is hoped that this paper may shed lights on any further study about PPC and enterprise competitiveness of sustainable development.

A comprehensive Energy Audit of a Maintenance facility was performed to assess its energy performance and identify scope for improvement. The facility’s Energy Use Intensity (EUI) for 2022 was 404 kWh/m2 — more than double the Benchmark EUI for Maintenance facilities (151 kWh/m2) recommended by EnergyStar. Furthermore, the Load Factor for 2022 was 0.22, which is lower than the recommended minimum of 0.75 for an efficient building. The audit encompassed an in-depth evaluation of the building's structural and operational characteristics, comprising HVAC systems, lighting, building envelope, and energy-intensive machinery. An energy model of the building was developed to emulate the baseline building energy performance for 2022. Following the energy model's development and validation, an analysis was conducted to identify energy-intensive areas and opportunities for optimization. Energy Efficiency Measures were then formulated, focusing on improving energy efficiency while focusing on energy consumption reduction and GHG emission reduction. Results demonstrated the potential of Energy Audits and Modeling to enable significant reductions in energy consumption and promote sustainable building practices. Among the Energy Efficiency Measures considered, re-sizing and decarbonizing HVAC equipment contributed the most to energy savings, with a 100% decrease in natural gas and 37% decrease in electricity use annually.

Compton cameras detect scattered gamma rays and estimate the distribution of gamma-ray sources. Nonetheless, crafting a camera tailored to a specific application presents formidable challenges, often necessitating the implementation of diverse image reconstruction techniques. Delving into the factors influencing these cameras can pave the way for design optimization and performance enhancement. This study introduces an inventive detector design for Compton imaging systems, building upon the achievements of prior designs. The proposed system contains eight scatterer detectors and a semiconductor absorber detector, spaced at 1 mm and 30 mm intervals, respectively. The source-to-first-scatterer-detector distance is 5 mm, with scatterer and absorber detector plates measuring 70× 70× 2.125 mm³ and 70× 70× 10 mm³, respectively. Geant4 simulation toolkit models the Compton imaging system, and an analytical method reconstructs Compton camera images. Unlike more straightforward techniques, the analytical method directly reconstructs Compton camera images by solving the equation relating to the reflected image data. This approach is implemented in the C++ programming language. The study's findings reveal that the analytical method discerns optimal conditions and parameters that significantly influence efficiency, yielding a full width at half maximum (FWHM) of 3.7 mm with an angular uncertainty of approximately 2.7 degrees at an energy level of 0.662 MeV. Compared to another experimental design employing the analytical image reconstruction approach, the FWHM value decreased by 0.7 mm. This study presents an innovative detector design and an analytical reconstruction method for Compton imaging systems, showcasing improved efficiency and accuracy.

In this study, the efficiencies of flat-plate and U-tube solar collectors were investigated experimentally when an Al₂O₃ nanofluid was used as a working fluid and compared to those of solar collectors using water. The energy saving and CO₂ and SO₂ generated were calculated and compared to those of solar collectors using water. In addition, based on the experimental results, an economic analysis of the use of solar collectors in various countries was performed. As the concentration of the Al₂O₃ nanofluid increased, the performance of the solar collector improved. The highest efficiency for the solar collectors was shown at the concentration of 1.0 vol% with the nanoparticle size of 20 nm. The maximum efficiencies of the flat-plate and U-tube solar collectors using 1.0 vol%-Al₂O₃ nanofluid with 20-nm nanoparticles was 74.9% and 72.4%, respectively, when the heat loss parameter was zero. The efficiencies of the flat-plate and U-tube solar collectors using Al₂O₃ nanofluid were 14.8% and 10.7 higher, respectively, than those using water. When 50 EA flat-plate solar collectors were operated for one year using Al₂O₃ nanofluid, the coal use, generated CO₂, and generated SO₂ were 189.99 kg, 556.69 kg, and 2.03 kg less than those of solar collectors using water, respectively. In addition, the largest electricity cost reduction was in Germany.

In this paper, we propose a simple tool to help the energy management of a large buildings stock defining clusters of buildings with the same function, setting alert thresholds for each cluster, and easily recognizing outliers. The objective is to enable a building management system to be used for detection of abnormal energy use. First, we framed the issue of energy performance indicators, and how they feed into data visualization (Data Viz) tools for a large building stock, especially for university campuses. Both for Data Viz and clustering algorithm processes, we discussed two possible approaches to choose the right number of clusters and the identification of alert thresholds and outliers, after a brief presentation of the University of Turin's building stock case study. Different Data Viz tools have been studied to apply a specific clustering algorithm, the k-means one. An explorative analysis based on the general Multidimensional detective approach by Inselberg has been performed. Two multidimensional analysis tools, the Scatter Plot Matrix and the Parallel coordinates method have been used. Secondly, the k-means clustering algorithm has been applied on the same dataset in order to test the hypothesis made during the explorative analysis. Data Viz techniques developed in this study revealed to be very useful to explore quickly and simply a large buildings' stock, identifying the worst efficient buildings and clustering them according to their distinct functions.

Energy efficiency and leakage magnetic field (LMF) are two important issues in electric vehicle inductive chargers. In this work, the maximum achievable coil efficiency and the corresponding LMF strength are formulated as functions of hardware parameters, and figure of merits (FOM) are proposed for assessing the efficiency and LMF performance of the coil assembly pair. The impacts of the coil assemblies’ geometric parameters on both FOMs are examined with the aid of finite element analysis (FEA), and measures to improve the FOMs are extracted from FEA results. A coil assembly pair is manually optimized within given dimensional limits. Compared with the initial design, the optimized one achieves higher efficiency and lower LMF strength while consuming less copper. The performance improvement is verified by FEA results and experimental data measured on an 85 kHz electric vehicle inductive charger prototype. The key measures for coil assembly optimization are summarized.

This study analyzes the relevance of governance structure for efficiency in revenue collection by Brazilian Water Utilities (WUs). Data was collected from the National Information System on Sanitation (SNIS) for 127 Brazilian WUs, covering a balanced longitudinal panel from 2018 to 2022. Governance structures evaluated included Ownership (public or private) and Corporatization (publicly traded or not). In scientific databases, we did not find studies on the efficiency of specific WUs in collecting customer bills for services rendered and its relationships with this type of governance; thus, this would be the main innovative contribution of the study to the previous literature. In the first stage, the study utilized the Dynamic Slack Based Model (DSBM) to assess revenue collection efficiency. In the second stage, an econometric model with Generalized Estimating Equations (GEE) to explain the efficiency. The findings revealed a global average inefficiency of 50.47% in revenue collection. Corporatization was linked to higher collection efficiencies, while ownership type was significant, but with lower collection efficiency. Factors such as tariff accessibility, urbanization, and the COVID-19 pandemic also influenced efficiency. The study suggests regulatory bodies should consider these insights to implement policies that prevent inefficiencies from affecting the tariff system for services.

Urban heat islands and rising global temperatures are increasing the need for passive cooling solutions in densely populated areas. This study examines the effectiveness of heat-reflective paint in reducing surface and indoor temperatures in a 33-year-old apartment complex in Gumi City, South Korea. Using mock structures to simulate real building conditions, the experiment measured surface and indoor temperatures in both treated and untreated groups. Data collected from thermal imaging cameras and data loggers demonstrated significant temperature reductions on the treated walls, with surface temperatures lowering by 2.2°C to 4.3°C on average, and peak reductions of up to 15.3°C. Internally, the treated structures showed temperature reductions between 2.1°C and 4.1°C, with the largest difference observed during peak heat hours at 4.14°C. The results highlight the effectiveness of heat-reflective paint in mitigating heat stress and improving indoor thermal comfort, particularly in regions with high solar exposure. Importantly, this study aims to benefit vulnerable populations, such as the elderly and economically disadvantaged residents, by providing a cost-effective, sustainable solution to reduce heat exposure in aging urban buildings, thereby enhancing their quality of life.

The sand-dust horizontal flux is an important parameter for the study on aeolian sand transport, as well as an important foundation. In this study, a field experiment was developed to measure the data of aeolian transport and microclimate during different dust events with an auto sand sampler, a piezoelectric saltation sensor (H11-Sensit) and a 10 m high meteorological tower in Ta Zhong, the hinterland of the Taklimakan Desert from July to August in 2010. Then, the sampling efficiency of auto sand sampler and horizontal dust flux of near surface were analyzed based on observed data. The results were as follows: sand collector skip turnover increased with the increase of the intensity of dust weather frequency increases, the power function relationship y=2.115 x0.9841, R2 = 0.9206, flip frequency per minute increased from 0.2794 times to 1.3041 times, change is obvious; With the strength of the weather, time to flip the average sediment is shrinking. Sandstorm weather, skip to flip a volume of 3.7160 g, grade I flying sand weather flip a volume of 4.0275 g, the amount of class II flying sand weather turns over a 5. 0035g.The horizontal dust flux of different dust events that calculated with the equation Q=256M; the maximum of one dust event was about 190.335 kg, and the minimum was 1.2 kg. Overall, the sand transportation rate increased with wind speed. However, the changes of sand transportation rate did not quite fit in with wind speed during some dust events, and in this case the corresponding surface temperature was significantly higher. The experimental data obtained can provide theoretical basis for regional sand control and enacting effective engineering measures.

Perovskite based solar cells have achieved tremendous progress reaching record efficiency in the past 5 years. Numerous new processes and chemistry have been reported and contribute to the perovskite rapid progress. Continuous efficiency improvements are still necessary for perovskite solar cells, and an exploratory data analysis on devices performance over multiple studies could boost the technology development. Such analysis could identify patterns or provide insights that are not obvious in a single study. Here we present a high quality dataset containing only independently certified Pb-based perovskite solar cells summarizing their efficiency, relevant I-V metrics, manufacturing processes and materials used. Analysis over the dataset provides insights on how aperture size, perovskite deposition methods and materials used in each functional layer affect the final solar cell efficiency and I-V metrics. Future directions are also suggested for efficiency improvements.

Thermoelectric (TE) waste heat recovery has attracted significant attention over the past decades, owing to its direct heat-to-electricity conversion capability and reliable operation. However, methods of system-level TE design optimization for specific application systems have not been thoroughly investigated. This work theoretically studies the performance optimization and exergy analysis of TE systems for recovering waste heat from the exhaust ducts of a gas turbine power plant. A numerical tool has been developed to solve the coupled charge and heat current equations with temperature-dependent material properties and convective heat transfer at the interfaces. Our calculations show that at the optimum design with 50 % fill factor and 6-mm leg thickness made of state-of-the-art Bi2Te3 alloys, the proposed system can reach power output of 10.5 kW for the TE system attached on a 2 m-long, 0.5 x 0.5 m2-area exhaust duct with system efficiency of 5 % and material cost per power of 0.23 $/W. Moreover, our extensive exergy analysis reveals that only 1 % of the exergy content of the exhaust gas is exploited in this heat recovery process and the exergy efficiency of the TE system can reach 8 % with improvement potential of 85 %.

To address the challenges of climate change and food security, the establishment of smart farm complexes is necessary. While there have been numerous studies on the productivity and environmental control of individual greenhouses, research on greenhouse complexes is considerably limited. Conducting environmental studies during the design phase of these complexes poses financial constraints and practical limitations in terms of on-site experiments. To identify potential issues that may arise when developing large-scale greenhouse complexes, it is possible to utilize modeling techniques using Computational Fluid Dynamics (CFD) to assess environmental concerns and location issues before constructing the facilities. Consequently, simulating large-scale CFD models that incorporate multiple greenhouses and atmospheric conditions simultaneously presents significant numerical challenges. The objective of this study was to develop a guideline for verifying CFD models for a large-scale Venlo greenhouse, where acquiring field data before construction is not feasible for designing a greenhouse complex. The verification processes of the CFD models were conducted using 2D and 3D iterative simulations of a 2-hectare greenhouse model, using the improved Grid Independence Test (GIT) and wall Y+ approaches. Subsequently, the aerodynamic characteristics were analyzed in a 3D greenhouse model to access its performance when the wind direction was 90° in summer season. The findings revealed that a grid resolution of 0.8 meters and a first layer height of 0.04 meters were suitable for developing large-scale greenhouse models, resulting in a low Root Mean Square Error (RMSE) of 3.9% and a high coefficient of determination (R2) of 0.968. This process led to a significant reduction of 38% in the number of grid cells. These results will serve as design standards for large-scale greenhouses.

This paper presents the results of aerodynamical performance research focused on maintaining the thermal comfort and increasing the energy efficiency of a typical social housing unit located in a high-density urban area. Bioclimatic design strategies are used to develop a sustainable and economic technology in existing housing clusters in Mexico City. A full-scale prototype, built on campus facilities, was used to study the flow conditions around the design. All scaled prototypes implement similar criterion. Furthermore, a scaled prototype is evaluated within a low speed wind tunnel installation. Additionally, numerical simulations were performed at transient state based on previous physical measurements and historical local climatic conditions to determine preferable modifications.

The benchmarking of hotel energy use comprehensively identifies the controllable and uncontrollable factors affecting energy performance, including building characteristics, management strategies, operations, and maintenance systems. Other factors include climatic conditions, floor areas, operating hours, occupancy rates, and guest populations. A benchmarking study on energy consumption patterns in significant hotels (each with less than 100 rooms and an average staff strength of 40 employees), situated in the university town of Nsukka (longitude 70 23' E, latitude 60 52' N), Nigeria, was performed using the data envelopment analysis (DEA) methodology. DEA, a linear programming technique that measures the relative performances of units, was chosen as a benchmarking methodology due to its ability to handle multiple inputs and outputs. Following a correlation test, energy use intensity, diesel consumption, and the number of employees were selected as the analysis inputs, while the occupancy rate was chosen as the output variable. Data on these variables spanning 12 months were collected using questionnaires, interviews, site visits, and oral conversations with hotel managers to ensure validity. Grid-supplied electricity accounted for most of the hotels' energy needs, followed by diesel used in generators. More than 70% of the electricity use was for HVAC. From the DEA, Hotel 3 (DMU H3) had a technical efficiency score of 1, whereas adjustments were recommended for improving the efficiency scores of the other hotels, which were deemed inefficient. DMU H7 had the lowest efficiency score (0.474) and the highest identified savings for electricity and diesel. The analysis also revealed that occupancy rates were generally low in the months of June and July, coinciding with the high rainfall season with its accompanying decline in outdoor activities. Consistent with this, electricity consumption was highest in the Christmas and Easter holiday months of December, January, and April following increased travel-related activities.

The electric vehicle market is constantly evolving, with research and development efforts to improve motor technologies and address current challenges to meet the growing demand for sustainable transportation solutions well underway. Electric vehicles are crucial to the global initiative to reduce carbon emissions. The core component of an electric vehicle is its motor drive technology, which has seen significant advancements and diversification in recent years. Although alternating-current motors, particularly induction and synchronous motors, are widely used for their efficiency and low maintenance, direct-current motors provide high torque and cost-effectiveness advantages. This study examines various electric motor technologies used in electric vehicles and compares them using several parameters such as reliability, cost, and efficiency. This study presents a multi-criteria comparison of the various electric motors used in the electric traction system to provide a picture that enables selecting the appropriate electrical motor for the intended application. Although the permanent magnet synchronous motor appears to be the popular choice among electric car makers, the proposed comparative study demonstrates that the induction motor matches the essential requirements of electric vehicles.

The performance analysis of the internal/external flows around a high speed vehicle in near-space is fundamental and critical to the configuration and structure design for high speed aircraft. In this paper, the two-dimensional coupled implicit Reynolds Average Navier-Stokes (RANS) solver and RNG k–ε turbulence model is employed to numerically simulate the flow field of an integrated high speed vehicle. The flow field are divided three parts to solve separately and compared with that solved by integrated simulation. The flow field are decomposed to save computer storage and simulation time. The first part is inlet/isolator, the second part is combustion chamber and the third is nozzle. In the computation process, the outlet condition of isolator is endowed to the inlet boundary of combustion chamber and the outlet boundary of combustion chamber is endowed to the inlet boundary of nozzle, then the whole flow field of integrated high speed vehicle is solved. Aerodynamic characteristic of fragment-computation and integration-computation is comparatively analyzed at different angles of attack, the results show that the maximum deviation of lift coefficient obtained by fragment-computation is less than 3% compared with that by integration, the maximum deviation of drag coefficient fragment-computation is less than 5% compared with that by integration, while pitching moment coefficient deviation less than 12%. However, for simulation time-consumption, the time used by fragment-computation reduces 45% compared with integration-computation. Meanwhile, by components force analysis, it can be concluded that the aerodynamic property of inlet/isolator can been obtained separately and hardly effected by other parts.

The aims of this paper can be traced back to goals number seven, twelve and thirteen introduced by Agenda 2030, namely "affordable and clean energy", “responsible consumption and production” and "climate action”, respectively. This is due to the fact that the present work supports decarbonization processes acting in a direct way on the electricity consumption achieved by plants pertaining to the waste industry; in fact, this study aims at the realization of a machine learning model for predicting the energy consumption achieved by a mechanical biological treatment (MBT) waste plant located in central Italy, given the distribution of the entering waste. This model is implemented in MATLAB. The model can be used to tune the distribution of the entering waste in order to adapt the plant energy consumption to the capability of the energy sources and can serve as a play-ground model for other energy transformation plants. The results of the study, which feed the literature on the application of artificial intelligence to real industrial plants, could be used to determine energy efficiency actions that could be incorporated into Property’s strategic planning.

In hydraulic systems, energy dissipation can be significant. The pressure drops that can occur in the hydraulic circuit, influenced by the adopted drive architecture, result in an absorbed power often significantly greater than that required by the mechanical system. In this paper, a comparative study of energy efficiency among five drive common architectures in industrial hydraulic axes is carried out. The analysis is applied to a hydraulic blanking press with variable speed and force, a fairly frequent industrial system, e.g. in the production of semi-finished brass products. Standard, regenerative, high-low, variable displacement pump and variable speed drive for a fixed displacement pump configurations have been analysed and compared. An adequate and optimized sizing of the various components of the system has been carried out in each case and subsequently the energy consumption has been estimated for a load cycle common to all the considered cases. The results show that the choice of power generation architecture of the hydraulic system has a very significant impact on energy efficiency and consequently operating costs and carbon footprint. The performed quantification of the potential energy efficiency of the considered drive architectures can be very useful in guiding energy-conscious choices.

The formation of the required AC voltage level is currently one of the most important problems. An unstable voltage level can lead to the failure of domestic and industrial equipment, also to the appearance of a lighting equipment flicker effect, which can adversely affect the operating mode. In this regard, the development of AC voltage regulators that perform the function of stabilizers has become relevant. In turn, new topologies should be energy efficient and reliable, this can be achieved by reducing the number of semiconductor elements, which in turn will reduce losses and increase efficiency. In addition to voltage stabilization, AC voltage regulators have found application as soft-start devices for asynchronous motors, and have become competitors to frequency converters. The power level can vary from units to tens of kilowatts where such devices can be used. This paper provides a review of AC voltage regulators, which can be used both as soft starters and AC voltage stabilizers. The analysis of the circuits was carried out and the efficiency was evaluated through their total harmonic distortions (THD), power factor and efficiency coefficient. Experiments were also performed for a number of circuits, where their operating modes were evaluated. Eventually, all circuits were divided into full number of switches with two or more AC switches per phase, with a reduced number of switches, where one AC switch per phase and with low number of switches – with one complementary pair of AC switches for all three phases.

To reduce the carbon emissions during heating in the manufacturing process, microwaves have attracted significant attention. Microwave has a lot of advantages rather than traditional heating method such as rapid heating, lower thermal damage and eco-friendly process. In order to apply microwaves to manufacturing process, uniform and efficient heating is required. We have analyzed the effect of various design parameters such as cavity heights, the application of the reflector, and the number and positions of waveguides for uniform and efficient heating by numerical simulation and verified that by experiment. The results showed that a slight change in the cavity height altered the electromagnetic field distribution and heating parameters, such as the coefficient of variance and power absorption efficiency. With reflectors installed, uniform heating was achieved and power absorption was improved, with the spherical reflector showing the maximum efficiency. The use of double waveguides heated the target material in a uniform manner. An increase in the power supply also led to uniform heating. This large-scale analysis will be helpful in applying microwaves to actual industrial sites.

The implementation of sustainable practices, such as the use of renewable sources and efficient technologies, is crucial for reducing climate change. Energy efficiency is highly important on a global scale due to its relationship with climate change, aiming to minimize environmental impact. In Spain, renewable energy policies have increased self-sufficiency and reduced the use of fossil fuels. Optimizing energy consumption in residences, buildings, and industries is essential for improving efficiency. This was taken into consideration for conducting this study, focusing on the residential sector. The desire to understand the level of energy efficiency in Extremadura drove this project, which focuses on collecting and analyzing data on a set of homes located in the au-tonomous community of Extremadura, with the purpose of evaluating their energy efficiency. To achieve this, a computer tool will be employed to provide a detailed view of the different levels of energy efficiency present in the community. In addition to data collection and analysis, research will be conducted to identify areas for improvement. This will allow proposing a series of specific measures that users can implement to optimize energy efficiency in their homes, adapting them to the particular characteristics of each residence.

When all countries are battling Covid-19 by adopting different policies, it could help address the issue of government response policy efficiency. This study examines the efficiency of government intervention policies in 19 countries, the efficiency of preventing the spread, and also the mortality caused by the virus. The policies are categorized based on the Oxford COVID-19 Government Response Tracker, which combines various indicators, including Containment and closure, Economic response, and Health systems. Given that the governments apply a top-down approach to design these policies, the current research evaluates the efficiency of policies based on the same approach. Here, two different models have been used to calculate the efficiency of policies. We designed a combined index in both models and applied Window DEA method to determine the output quantities in the efficiency ratio. The results of our study show that in both models, Japan, Finland and Thailand had the highest level of government response efficiency. The countries with the lowest government response efficiency were the United States, Spain, and Russia in the first model, and China, Italy, and Spain in the second.

This research paper presents a detailed analysis of a Lightweight Block Cipher’s power consumption and security features (LWBC), specifically designed for IoT applications. To accurately measure energy consumption during the execution of the LWBC algorithm, we utilised the Qoitech Otii Arc, a specialised tool for optimising energy usage. Our experimental setup involved using the Otii Arc as a power source for an Arduino NodeMCU V3, running the LWBC security algorithm. Our methodology focused on energy consumption analysis using the shunt resistor technique. Our findings reveal that the LWBC is highly efficient and provides an effective solution for energy-limited IoT devices. We also conducted a comparative analysis of the proposed cipher against established LWBCs, which demonstrated its superior performance in terms of energy consumption per bit. The proposed LWBC was evaluated based on various key dimensions such as power efficiency, key and block size, rounds, cipher architecture, gate area, ROM, latency, and throughput. The results of our analysis indicate that the proposed LWBC is a promising cryptographic solution for energy-conscious and resource-limited IoT applications.

Energy efficiency of Data Center (DC) operations heavily relies on IT and cooling systems performance. A reliable and efficient cooling system is necessary to produce a persistent flow of cold air to cool servers that are subjected to constantly increasing computational load due to the advent of IoT- enabled smart systems. Consequently, increased demand for computing power will bring about increased waste heat dissipation in data centers. In order to bring about a DC energy efficiency, it is imperative to explore the thermal characteristics analysis of an IT room (due to waste heat). This work encompasses the employment of an unsupervised machine learning modelling technique for uncovering weaknesses of the DC cooling system based on real DC monitoring thermal data. The findings of the analysis result in the identification of areas for energy efficiency improvement that will feed into DC recommendations. The methodology employed for this research includes statistical analysis of IT room thermal characteristics, and the identification of individual servers that frequently occur in the hotspot zones. A critical analysis has been conducted on available big dataset of ambient air temperature in the hot aisle of ENEA Portici CRESCO6 computing cluster. Clustering techniques have been used for hotspots localization as well as categorization of nodes based on surrounding air temperature ranges. The principles and approaches covered in this work are replicable for energy efficiency evaluation of any DC and thus, foster transferability. This work showcases applicability of best practices and guidelines in the context of a real commercial DC that transcends the set of existing metrics for DC energy efficiency assessment.

Based on stochastic frontier analysis and translog input distance function, this paper examines the total factor energy efficiency of China’s industry using input-output data of 30 sub-industries from 2002 to 2014, and decomposes the changes in estimated total factor energy efficiency into the effects of technical change, technical efficiency change, scale efficiency change and input-mix effect. The results show that during this period the total factor energy efficiency in China’s industry grows annually at a rate of 3.63%, technical change, technical efficiency change and input-mix effect contribute positively to the change in total factor energy efficiency, while scale efficiency change contributes negatively to it.

This research investigates the intricate dynamics between intellectual Capital (VAIC) and the stability of banks in the evolving context of Saudi Arabia's banking sector. Against the backdrop of rapid economic reforms under Vision 2030 and the challenges imposed by the COVID-19 pan-demic, the research provides a nuanced analysis of how intellectual capital and intellectual capital's components—Human Capital Efficiency (HCE), Structural Capital Efficiency (SCE), and Capital Employed Efficiency (CEE)—affect the financial stability of Saudi banks. The research analyses a decade-long panel dataset from 2012 to 2022, utilizing both fixed effects and cross-section random effects models to discern the impact of intellectual capital on bank stability. The findings reveal a positive overall influence of intellectual capital on bank stability; however, individual compo-nents present a complex relationship, with CEE showing a positive association and HCE and SCE demonstrating unexpected negative correlations with bank stability. The research identifies lev-erage (LEV) as a significant factor negatively impacting stability. Operational efficiency (OPEF) and size (SIZE) also negatively affect stability. Surprisingly, macroeconomic indicators and bank size exhibit non-significant effects on bank stability. Similarly, the direct impact of the COVID-19 pandemic was found to be non-significant, suggesting a resilient banking environment or the presence of effective mitigating strategies. As Saudi Arabia continues its ambitious economic transformation, this research underscores the critical role of effectively managed intellectual capital in ensuring the banking sector's stability. It provides a foundation for ongoing research in this vital area.

In this study, we explored the integration of evaporative cooling pads (ECPs), typically used for cooling open areas in arid climates, with split air conditioning systems. The objective was to assess the improvement in cooling efficiency and the reduction in electricity consumption. Two experimental setups were evaluated: a standard setup without an evaporative cooling system (ECS) and an enhanced setup incorporating ECS. The ECS was installed behind the outdoor air conditioning unit, positioned near the condenser, and supplied with water through a pump system. The key performance metric was electricity consumption, and the findings revealed a significant 36% reduction in energy usage when the ECS was employed. Additionally, the cooling performance within the conditioned space improved. This study demonstrates the potential of integrating evaporative cooling systems into air conditioning units to enhance energy efficiency in desert environments, with a detailed comparison of system performance based on air conditioner capacity and electrical current readings.

The energy crisis is currently a major topic in scientific and managerial discussions in the building and construction industry. While employing low-cost strategies for reducing energy usage is beneficial for principals and decision-makers, the primary purpose of this study is to recommend the use of phase change materials (PCM) to improve cooling and heating load management in buildings. In order to accomplish this, the study applies design-builder simulations to a developing country case study. The results indicate that integrating PCM in buildings can reduce energy usage by around 6 percent. Although this value may be lower than other techniques, it is nevertheless important for reaching green building goals in both developed and developing nations. The case study, which takes place in a four-season region, demonstrates the significant potential of the PCM system for both cooling and heating energy management. In addition, the reciprocal performance improvement of PCMs is a remarkable characteristic, especially when contrasted to some conventional systems that focus on a single energy management objective in buildings. Lastly, it should be underlined that the suggested platform is consistent with Sustainable Development Goal 7 (Affordable and Clean Energy Targets).

The power utility, Tanzania Electric Supply Company Limited (TANESCO) is faced with challenges of supplying adequate power to the ever-increasing demand. To this end, this paper explores the installed Ubungo Gas Power Plant (UGP II) located in Dar es Salaam to find means of utilizing it in co-generation method. The study embarked on detailed modelling of the system and run simulations which indicated that the co-generation can result to power generation efficiency increase between 10.42 to 50.92%. It is recommended to change the UGP II to exploit this co-generation method. Further, the study could be improved by including more parameters of the gas and steam plant and verify them experimentally.

The problem of real-time estimation of occupancy of buildings (number of people in various zones at every time instant) is relevant to a number of emerging applications that achieve high energy efficiency through feedback control. The measurement of CO2 concentration can be considered an important indicator that allows to define the occupation of closed and crowded spaces. Interesting cases can be school buildings and other buildings used in civil and residential (shopping centres, hospitals, etc.). This paper, starting from an experimental analysis in different classrooms of a University campus in real operating conditions, in different period of the year, proposes a possible correlation between CO2 concentration and the occupancy profile of the spaces. The acquired data are used to present some graphical correlations and to understand the most important variables or combination of them. Starting from an accurate analysis of the data, attempts are made to define a preliminary estimation method through the development of a mathematical models of occupancy dynamics in a building, which show interesting results.

We consider the restrictions on photovoltaic (PV) capacity that are caused by limitations on where panels can be sited, and find quantitative evidence for the need for high efficiencies. We define 15% of the UK’s energy consumption as a “significant” contribution and, with London as an exemplar, we perform an idealised calculation that makes the most optimistic possible assumptions about the capabilities of future PV technologies, and use published surveys of energy usage, dwelling type and insolation. We find that covering every UK domestic roof with the highest power-conversion efficiency (PCE) solar panels currently commercially available, could produce up to 9% of the UK's energy. A 15% contribution would require PV technologies with >37% PCE, more than the theoretical Shockley-Queisser limit. Replacing the idealising assumptions with more realistic estimates increases this by 2-3 times. Alternatively, a solar farm using the currently available PCEs would require a politically challenging ~1200km2 of new land, roughly the area of Greater London, for this 15% contribution. We conclude that PCEs must be driven higher even than the Shockley-Queisser limit for PV to play a significant part in carbon mitigation.

Nonparametric assessments of police technical and scale efficiency is challenging because of the stochastic nature of criminal behavior and because of the subjective dependence on multiple decision criteria, which can lead to a more or less efficiency prospect depending on the regulation, necessity, or organizational objective. There is a trade-off between efficiency and effectiveness in many police performance assessments, i.e., efficient departments (producing more clear-ups with a given resource) are crime-specialized or cannot reproduce those good results effectively on more severe or complex occurrences. This study proposes a combined methodology for carrying out efficiency and effectiveness analysis of Police departments. A conditional non-parametric approach, which allows to include crime as an external factor in the analysis, is combined with a non-compensatory ranking based on the PROMETHEE II methodology for the approach illustrated on the multidimensional efficiency and effectiveness comparison of 145 Pernambuco (Brazil)'s police departments. The application results offer compelling perspectives for public administrations concerning the strategic prioritization of units for rewards or interventions.

A computational simulation of a PT6A gas turbine engine operating at off-design conditions is described in the present article. The model consists of a 0-dimensional thermo-fluidic description of the engine by applying the mass, linear momentum, angular momentum, and energy balances in each engine's component. The transient behavior of the engine is simulated for different blends of the original JET-A1 fuel with bio-diesel. Simulated thermodynamic variables of the air at each engine's component, as well as some performance parameters correspond to the reported experimental measurements. The numerical results also demonstrate the ability of the computational simulation to predict acceptable fuel blends, such that the efficiency of the engine is maximized and its structural integrity is maintained.

This paper delves into the comprehensive analysis and investigation of thermodynamic enhancement and exergy optimization of turbofan engines through the integration of fuzzy logic and newest meta-heuristic optimizers, like the Artificial Bee Colony (ABC) and Particle Swarm Optimization (PSO). In contemporary engineering practices, exergy analysis stands out as a crucial and indispensable tool utilized by numerous engineers and researchers in the design, operation, and performance evaluation of energy systems. Its multifaceted advantages include the precise determination of location, types, and quantification of exergy losses and production. By augmenting exergy efficiency while concurrently curbing exergy destruction, substantial enhancements in engine performance and cost reduction can be achieved. The study focuses on the CF6-80A and CFM56 turbofan engines, scrutinizing individual components such as the fan, low-pressure compressor, high-pressure compressor, combustion chamber, high-pressure turbine, and low-pressure turbine. Key parameters for engine evaluation encompass exergy efficiency, recovery potential, relative exergy destruction, fuel depletion rate, and inefficiency. To conduct a rigorous exergy analysis, engine modeling is imperative, particularly during the cruise phase, which predominantly characterizes engine operation. Subsequently, exergy analysis is executed in accordance with established thermodynamic principles, leveraging equations governing mass conservation, energy conservation, and exergy conservation for each engine component. Further optimization of exergy destruction is achieved through the application of meta-heuristic optimizers and fuzzy logic, facilitating informed decision-making processes.

Efficient commencement of clinical trials is pivotal for their successful execution. The purpose of this study was to determine and examine the factors that contribute to trial start-up delays. The study assessed 20 clinical trials' start-up stages in order to identify relevant variables. Results showed that trials with an emphasis on devices, trials that did not outsource, trials that utilized less auxiliary services, and trials that employed interventional designs had quicker start-up times than observational studies. Furthermore, approval times were substantially shortened by using a centralized Institutional Review Board (IRB) rather than a local IRB. Furthermore, compared to studies that successfully enrolled subjects, those who failed to do so required more time to complete contracts and budgets and secure IRB clearance. This study underscores the diverse impact of clinical trial features on start-up timelines. Understanding these factors is crucial for optimizing the initiation process of clinical trials.

Foxtail millet (Setaria italica (L.) P. Beauv) is an important food and forage crop that is well adapted to nutrient-poor soils. However, little is known about how foxtail millet adapts to low nitrogen (LN) at the physiological and molecular levels. In the present study, two foxtail millet varieties with contrasting low nitrogen (LN) tolerance properties were investigated through integrative analyses of physiological featureparameters and transcriptomics. The physiological results showed that JG20 (high tolerance to LN) had higher biomass accumulation, nitrogen content and nitrogen use efficiency compared with JG22 (low tolerancesensitive to LN) under LN. JG20 had higher soluble sugar and soluble protein concentration in shoots compared with JG22 under LN, while contcentrations of soluble sugar and soluble protein contents were higher in the roots of JG22. Higher levels of CTK contentzeatin concentration were found in the shoots of JG20 com-pared with JG22, and a higher ABA contcentration was found in both the shoots and roots of JG22 compared with JG20 under LN. In the transcriptomics results, JG20 had more differentially ex-pressed genes (DEGs) than JG22 both in shoots and roots in response to LN. These LN-responsive genes were enriched in glycolysis, starch and sucrose metabolism, photosynthesis, biosynthesis of amino acids, hormone metabolism and nitrogen metabolism. Furthermore, the high-affinity nitrate transporter gene, SiNRT2.1, and glutamine synthetase gene, SiGS5, chlorophyll apoprotein of photosystem II gene, SiPsbQ, ATP synthase subunit gene, b, auxin-responsive protein gene, SiIAA25, and aldose 1-epimerase gene, SiAEP, in shoots, and high-affinity nitrate transporter gene, SiNRT2.3, SiNRT2.4, and glutamate synthase gene, SiGOGAT2, auxin-responsive protein gene, SiIAA4, fructose-bisphosphate aldolase gene, SiAEP5, in root, were important genes in-volved in the LN tolerance of foxtail millet. These results provide a detailed description of the physiological and transcriptome response of foxtail millet under LN condition.

This paper presents a new methodology to evaluate the performance of an electric vehicle hybrid power system consisting of a fuel cell and a supercapacitor. The study compares the results with those obtained for a battery-electric vehicle. The methodology extends to three driving modes, ECO, NORMAL, and SPORT, corresponding to conservative, moderate, and aggressive acceleration, and three driving conditions, low, medium, and high energy demand. We develop a simulation process to evaluate the energy consumption and the energy rate of a specific electric vehicle used as a prototype for the study. The methodology applies to a driving route that includes acceleration, deceleration, braking, and constant speed segments reproducing standard driving conditions in urban journeys. The proposed method considers combined driving modes, ECO, NORMAL, and SPORT, in each acceleration process, with variable fractions, 0% to 100%, for each mode. This methodology optimizes the simulation results as it fits the current driving way in urban environments. The simulation results show an average reduction in energy consumption of 37% and 27.1% in vehicle weight, contributing to lower energy use. The study concludes that using a hybrid power system, fuel cell/supercapacitor, instead of a battery in electric vehicles is beneficial, especially in journeys with frequent acceleration processes.

Using graph theory, computer aided motion, static force and power flow analysis of planetary gear mechanism is realized. The motion, static force and efficiency calculations of 6HP26 automatic transmission are carried out. Based on kinematic and static force analysis model, related matrices are acquired. Hence, kinematic and static force analysis of planetary gear mechanism is achieved. The link power can be determined by the link speed and torque. Power flow diagrams of each gear are acquired. The efficiency is calculated by transmission ratio method.

The allocation of funding for higher education typically focuses on competition in neoliberal mechanisms. Surprisingly, much less attention has been paid to considering the effect of fund locations for sustainable development through public goods purposes in neoliberal contexts. This study aims to examine specific funding schemes and determine the influential factors impacting funding for teaching, research, and public goods transformation. Taking Taiwan's Higher Education Sprout Project (HESP) as an example, we explored the effect of policy initiatives on public goods transformation towards sustainable development. The data were collected from the Ministry of Education and Scopus databases. First, a regression analysis was conducted to determine which factors influence the effect of funding allocations in academic institutes. Second, we used logistic regression to detect the effects of the system and the sector. Third, we used partial least square structural equation modeling (PLS-SEM) to explore the causal effects among the selected impact variables on expected outcomes. Finally, we used the bootstrap method to demonstrate the model’s robustness. Our study found that only diversity was shown in private technology groups receiving less HESP funding. At the same time, it did not widen the differences in the sector and system in the transformation process. Our findings suggest that funding allocations will not affect teaching and research based on sectors and systems. In contrast, this study demonstrates that transforming public goods through special funding can play a critical role in leading sustainable development in higher education.

The energy efficiency of ice hockey arenas is a central concern for the administrations, as these buildings are well known to consume a large amount of energy. Since they are composite, complex systems, solutions to such a problem can be approached from many different areas, from managerial to technological to more strictly physical. In this paper we consider heat transfer processes in an ice hockey hall, during operating conditions, with a bottom-up approach based upon on-site measurements. Detailed heat flux, relative humidity and temperature data for the ice pad and the indoor air are used for a heat balance calculation in the steady-state regime, which quantifies the impact of each single heat source. We then solve the heat conduction equation for the ice pad in transient regime, and obtain a generic analytical formula for the temperature profile that can be used in practical applications. We then apply this formula to the resurfacing process for validation, and find good agreement with an analogous numerical solution. Since it is given with implicit initial condition and boundary conditions, it can be used not only in ice hockey halls, but in a large variety of engineering applications.

This work deals with the performance evaluation of novel flat photovoltaic-thermal (PV-T) modules under vacuum. Through a 1D (dimensional) steady-state-energy-balance numerical model developed in MATLAB, two different layouts are studied: the first consisting of a photovoltaic (PV) cell installed just below the glass encapsulating the flat panel, and the second where the PV cell is placed on the selective solar absorber (SSA). In both cases the thermal and electrical efficiencies have been evaluated at different SSA operating temperatures, in the range of 323 K to 423 K. The analysis has been conducted at different energy bandgap (E_bg) of the PV cell and assuming a variable transmittance or emittance of the PV cell, depending on the design. The two systems efficiency comparison has been carried out at the same operating temperature. Overall, this work highlights the importance of high vacuum insulation, which guarantees the reduction of convective thermal losses, and shows that the maximum energy is produced for PV cells with E_bg ≈1.5-1.7 eV, depending on layout and operating temperature, by including the thermal output in the PV-T optimization. The energy and exergy efficiencies obtainable using the proposed PV-T systems are considerably improved compared to the results previously reported in the literature.

This study delves into the realm of heuristic evaluation within usability testing, focusing on refining and applying a tailored algorithm that simplifies the implementation of the Analytic Hierarchy Process for heuristic prioritization. Addressing the prevalent challenge of disparate evaluation methodologies and the absence of a standardized process in usability testing, our research introduces a novel method that leverages the Analytic Hierarchy Process alongside a bespoke algorithm. This algorithm utilizes transitive properties for pairwise comparisons, significantly reducing the evaluative workload. This innovative approach facilitates the estimation of heuristic relevance irrespective of the number of items per heuristic or the item scale and streamlines the overall evaluation process. In addition to rigorous simulation testing of the tailored algorithm, we applied our method in a practical scenario, engaging seven usability experts in evaluating a web interface. This empirical application underscored our method’s capacity to diminish the requisite comparison count and spotlight areas of improvement for critically weighted yet underperforming heuristics. The outcomes of this study underscore the efficacy of our approach in enhancing the efficiency and organization of heuristic evaluations, paving the way for more structured and effective usability testing methodologies in future research endeavors.

Generally playing group management performance and financial management performance of sports clubs are assessed separately. We adopt a non-parametric methodology to assess overall performance first conceptualising overall management as a production process comprising of two serially-linked subprocesses; playing group management and financial management. Thereafter, we decompose overall performance to obtain estimates of performance at the subprocess level. Through this procedure it is possible to determine whether it is a sports club’s on-field performance or off-field performance or both may contribute towards its inefficiency, if any, in overall management. Further, a model is developed to determine targets for inefficient clubs to become overall efficient. The method is applied to 18 clubs in Australian rules football league. In 2021 season, the results reveal that on-field performance, on average, is better than off-field performance and variability in off-field performance is higher than that of on-field performance. Observed overall management inefficiency is mainly due to inefficiency in financial management. Results are robust to weighting scheme adopted in overall efficiency configuration.

This study investigates the impact of intellectual capital on the sustainable performance of banks in Saudi Arabia, focusing on the period from 2012 to 2022. Utilizing data from ten major Saudi banks, the research examines how different components of intellectual capital—Human Capital Efficiency (HCE), Structural Capital Efficiency (SCE), and Capital Employed Efficiency (CEE)—influence key financial performance indicators such as Return on Equity (ROE) and Net Profit Margin (NPM). The study is grounded in the resource-based view of the firm, which suggests that a firm’s internal resources can provide a sustainable competitive advantage. The analysis employs panel data techniques, including fixed and random effects models, to assess the relationships between intellectual capital components and bank performance while controlling for variables like bank size, financial leverage, GDP growth, inflation, and the impact of the COVID-19 pandemic. The findings reveal that intellectual capital significantly enhances bank performance in Saudi Arabia, with human capital efficiency showing the most decisive influence on ROE and NPM. Structural capital and capital employed efficiency also contribute positively but vary in their impact on different performance measures. This research contributes to the theoretical and practical understanding of the role of intellectual capital in promoting sustainable banking practices. It underscores the importance of strategic management of intellectual capital in enhancing financial performance and achieving sustainability goals, particularly in the context of Saudi Arabia's Vision 2030. The study's insights are relevant for bank managers and policymakers who leverage intellectual capital for economic diversification and sustainable development.

The aims of this study are to measure the technical efficiency (TE) of Cambodian household’s rice production and trying to determine its main influencing factors using the stochastic frontier production function. The study utilized primary data collected from 301 rice farmers in three selected districts of Battambang by structured questionnaires. The empirical results indicated the level of household rice output varied according to differences in the efficiency of production processes. The mean TE is 0.34 which means that famers produce 34% of rice at best practice at the current level of production inputs and technology, indicates that rice output has the potential of being increased further by 66% at the same level of inputs if farmers had been technically efficient. Furthermore, between 2013-2015 TE of household’s rice production recorded -14.3% decline rate due to highly affected of drought during dry season of 2015. Moreover, evidence reveals that land, fertilizer, and pesticide are the major influencing input factors of household’s rice production, while disaster, education of household head, family size and other crops’ cultivated area are core influencing factors decreasing TE. Conversely, the main influencing factors increasing TE are irrigated area, number of plot area and sex of household head.

The aims of this study are to measure the technical efficiency (TE) of Cambodian household’s rice production and trying to determine its main influencing factors using the stochastic frontier production function. The study utilized primary data collected from 301 rice farmers in three selected districts of Battambang by structured questionnaires. The empirical results indicated the level of household rice output varied according to differences in the efficiency of the production processes. The mean TE is 0.34 which means that famers produce 34% of rice at best practice at the current level of production inputs and technology, indicates that rice output has the potential of being increased further by 66% at the same level of inputs if farmers had been technically efficient. Furthermore, between 2013-2015, TE of household’s rice production recorded -14.3% decline rate due to highly affected of drought during dry season of 2015. Moreover, evidence reveals that land, fertilizer, and pesticide are the major influencing input factors of household’s rice production, while disaster, education of household head, family size and other crops’ cultivated area are core influencing factors decreasing TE. Conversely, the main influencing factors increasing TE are irrigated area, number of plot area and sex of household head.

Small and medium-sized family farms are the place of life and source of income for about half of the population. The aim of the analysis was to determine the relationship between Eco-Efficiency, Human Capital Efficiency in small and medium-sized family farms. The analyses were carried out using an economic measure (value of agricultural production per work hour calculated per 1 ha) and synthetic measures: human capital and environmental measures. The synthetic measures were determined using the CRITIC-TOPSIS method by defining weights for variables used in the synthetic measures. The analyses covered five countries, namely: Lithuania (960 farms), Moldova (532 farms), Poland (696 farms), Romania (872 farms), and Serbia (524 farms). All the countries qualified for analysis are characterised by a high fragmentation of agricultural holdings. The analyses carried out allowed us to formulate the following conclusions: the Eco-Efficiency and Human Capital Efficiency indexes increase with area for small and medium-sized family agricultural farms. An increase in the Eco-Efficiency index with an increase in farm area leads to a suspicion that the smaller the farm area is, the more extensive the agricultural production being carried out. In addition, an increase in human capital efficiency with an increase in the area of a farm indicates that there is inefficiency in the utilisation of human capital resources in the agricultural farms studied.

This study identified, analysed, and prioritised significant factors for standardising the Korean smart city project evaluation system. We analysed the efficiency and productivity of companies currently providing smart city services to consider both policy and practical aspects. The prioritisation of smart city planning reflects the latest trends in South Korea, where urban planning is moving towards smart city planning. Furthermore, the capacity building of public-private/private-private partnerships indicate the importance of business scalability. This indicates that smart city services are only stabilised when the private sector is involved and leads the project, rather than focusing on public development. The feasibility of building intelligent facilities indicates that smart city projects should be implemented after securing cost-benefit feasibility. The results were used as the basis for building an evaluation system, showing that in smart city convergence alliances, small- and medium-sized enterprises achieved the highest efficiency by reducing inputs to 81% and 86%, under the assumptions of constant and variable returns to scales, respectively. As the operational aspect is more problematic than the technical aspect, policy alternatives are necessary for smooth business progress, including increased flexibility of laws and institutions and the activation of policies that temporarily relieve regulations to demonstrate smart city projects.

A multiscale model that enables quantitative understanding and prediction of the size effect on scattering properties of micro- and nanostructures is crucial for the design of LED surface textures optimized for high light extraction efficiency (LEE). In this paper, a hybrid process for combining full-wave finite-difference time-domain simulation and a ray-tracing technique based on a bidirectional scattering distribution function model is proposed. We apply this method to study the influence of different pattern sizes of a patterned sapphire substrate on GaN-based LED light extraction from the microscale to the nanoscale. The results show that near-wavelength–scaled patterns with strong diffraction are not expected to enhance LEE. By contrast, microscaled patterns with optical diffusion behavior have the highest LEE at a specific aspect ratio, and subwavelength-scaled patterns that have antireflection properties show marked enhancement of LEE for a wide range of aspect ratios.

Green innovation has become an important combination of high-quality economic growth and sustainable development of ecological environment. In this paper, the super-efficiency network SBM model is used to measure the two-stage green innovation efficiency of industrial science and technology R&D and achievement transformation in 30 provinces and cities from 2009 to 2019, and exploratory Data Analysis (ESDA) and spatial econometric model are used to investigate the spatial-temporal evolution characteristics and influencing factors of green innovation efficiency. The results show that: firstly, the overall efficiency of industrial green innovation is low, and the efficiency of scientific research and development and achievement transformation has experienced three stages of "upward-declining-revitalized period". The low efficiency of achievement transformation is an important factor hiding the improvement of the efficiency of industrial green innovation. Secondly, The industrial green innovation efficiency gradually increases from northwest to southeast, forming a centralized "line" and "block" distribution. The high efficiency area is still concentrated in the eastern coastal region, and the balanced development trend is obvious in the central and western regions. Finally, openness has a positive impact on the two-stage green innovation efficiency; Industrial structure and government investment in science and technology have a positive impact on the efficiency of science and technology research and development, but have no significant effect on the efficiency of achievement transformation. Enterprise size has a positive effect on achievement transformation efficiency, but has no significant effect on R&D efficiency. Environmental regulation has a positive impact on R&D efficiency and a negative impact on achievement transformation efficiency.

Cadmium telluride (CdTe), a metallic dichalcogenide material, has been utilized as an absorber layer for thin film-based solar cells with appropriate configurations, and the SCAPS-1D structures program has been used to evaluate the results. In both known and developing thin film photovoltaic systems, a CdS thin film buffer layer has been frequently employed as a traditional n-type heterojunction partner. In this study, numerical simulation was used to find a suitable non-toxic material for the buffer layer instead of CdS, among various types of buffer layers (ZnSe, ZnO, ZnS, and In2S3), and carrier concentrations for the absorber layer (NA) and buffer layer (ND) were varied to determine the optimal simulation parameters. carrier concentrations (NA from 2 x 1012 cm-3 to 2 x 1017 cm-3 and ND from 1 x 1016 cm-3 to 1 x 1022 ??−3) have been differed. The results showed that the CdS as buffer layer based CdTe absorber layer solar cell has the highest efficiency (?%) of 17.43%. Furthermore, high conversion efficiencies of 17.42% and 16.27% have been found for ZnSe and ZnO based buffer layers, respectively. As a result, ZnO and ZnSe are potential candidates for replacing the CdS buffer layer in thin-film solar cells. Here, the absorber (CdTe) and buffer (ZnSe) layers were chosen to improve the efficiency by finding the optimal density of the carrier concentration (acceptor and donor). The simulation findings above provide helpful recommendations for fabricating high-efficiency metal oxide-based solar cells in the lab.

Many metrics exist for the evaluation of binary classifiers, all with their particular advantages and shortcomings. Recently an “Efficiency Index” for the evaluation of classifiers has been proposed, based on the consistency, or matching, and contradiction, or mismatching, of outcomes. This metric and its confidence intervals are easy to calculate from base data in a 2x2 contingency table, and values can be qualitatively and semi-quantitatively categorised. For medical tests, in which context the Efficiency Index was originally proposed, it facilitates communication of risk (of correct diagnosis versus misdiagnosis) to both clinicians and patients. Variants of the efficiency index (balanced, unbiased) which take into account disease prevalence and test cut-offs have also been described. The objectives of the current paper were firstly to extend the EI construct to other formulations (balanced level, quality) and secondly to explore the utility of EI and all four of its variants when applied to the dataset of a large prospective test accuracy study of a cognitive screening instrument. This showed that the balanced level, quality, and unbiased formulations of EI are more stringent measures.

Jakarta is the capital city of Indonesia, which has its own problems in building transportation facilities, especially on land routes. For private vehicle users, congestion is a common thing, given the very dense number of people living in Jakarta, both natives and migrants from outside the region. And for users of public transportation services such as city transportation (angkot) and transjakarta, convenience is the main obstacle. And even though it is a public vehicle, it cannot avoid congestion because it is in one lane with private vehicles except for the transjakarta bus which has its own lane. Meanwhile, for train-based public transportation such as MRT (Mass Rapid Transit), LRT (Light rail Transit), and electric railroad (KRL), the problem is the lack of integration, namely that many stations are not yet integrated with other transportation. Various policies have been implemented to overcome these problems. This study aims to determine the level of effectiveness and efficiency of public transportation in DKI Jakarta today. The method used in this research is qualitative-descriptive through a literature review on 16 journal articles and 4 websites. The results of this study indicate that congestion is a major problem in the means of transportation in Jakarta. This is due to the increase in population due to urbanization which is also accompanied by an increase in the number of private vehicles. Therefore, to overcome this, the Jakarta Provincial Government has made improvements, reforms, and developments in public transportation. And it is hoped that people who originally used private vehicles will switch to using public transportation. But in reality, various problems in public transportation in Jakarta have not been resolved properly. Especially why traffic jams still occur?, and what are the solutions to overcome them?. It is hoped that the results of the findings of this study can be used as a reference in making or designing policies and can contribute to overcoming problems in the transportation sector, especially in the DKI Jakarta area. The limit of this research is that it only focuses on land transportation facilities in Jakarta.

Industrial buildings have numerous energy-losing equipment, such as engines, ovens, boilers, and heat exchangers. Energy losses are related to inefficient energy use and lousy work conditions for the people inside the buildings. This work is devoted to the recovery of lost energy from industrial buildings. Firstly, the residual energy of the building is extracted to be used to warm water. Consequently, the work conditions of the people inside industrial buildings can be improved by maintaining the adequate temperature. The recovery energy is done by the multipurpose heat pump system (HP system). The working fluid used in the HP system is R134a, which is a traditional and cheap working fluid. The thermophysical properties of R134a are obtained through the PC-SAFT equation of state. This work presents a performance mapping based on the intercepted areas framework to evaluate which working conditions are the optimal operating variables. The latter depends on several key parameters, such as compressor work, heat delivery, heat absorbed, and exergetic efficiency. The results show that the optimal work conditions are found at different condenser and evaporator temperatures, and that may be limited by what the designer considers a good performance of the heat pump system.

Modern gas turbines firing temperatures (1500-2000K) are well beyond the maximum allowable blade material temperatures. Continuous safe operation is made possible by cooling the HP turbine first stages -nozzle vanes and rotor blades- with a portion of the compressor discharge air, a practice that induces a penalty on the cycle thermal efficiency. Therefore, a current issue is to investigate the real advantage, technical and economical, of raising maximum temperatures much further beyond current values. In this paper, process simulations of a gas turbine are performed to assess HP turbine first-stage cooling effects on cycle performance. A new simplified and properly streamlined model is proposed for the non-adiabatic expansion of the hot gas mixed with the cooling air within the blade passage, which allows for a comparison of several cycle configurations at different TIT (turbine inlet temperature) and max (total turbine expansion ratio) with a realistically acceptable degree of approximation.. The calculations suggest that, at a given max, the TIT can be increased in order to reach higher cycle efficiency up to a limit imposed by the required amount and temperature of the cooling air. Beyond this limit, no significant gains in thermal efficiency are obtained by adopting higher max and/or increasing the TIT, so that it is convenient in terms of cycle performance to design at lower rather than higher max. The small penalty on cycle efficiency is compensated by lower plant cost. The results of our model agree with those of some previous much more complex and computationally expensive studies, so that the novelty of this paper lies in the original method adopted on which the proposed model is based, and in the fast, accurate and low resource intensity of the corresponding numerical procedure: all advantages that can be crucial for industry needs. The presented analysis is purely thermodynamic, with no investigation on the effects of the different configurations on plant costs, so that future work addressing a thermo-economic analysis of the air-cooled gas turbine power plant is the next logical step.

Energy efficiency is, in principle, a simple idea: an output of human value, for example, vehicle-km traveled, divided by the needed input energy. Efficiency improvements are regarded by many as an important means of mitigating not only climate change, but also other environmental problems. Accordingly, many countries have efficiency ratings for appliances and efficiency standards for road vehicles. Despite the vast number of articles published on energy efficiency, few question whether it is a useful or accurate measure in its present form. This review addresses this lack, by a critical review of the literature, not only in energy efficiency, but in other areas of research, such as ‘energy services’, that can help broaden the scope of this idea, both geographically and conceptually. These shortcomings are illustrated in case studies of road passenger transport and buildings. The main findings are that energy efficiency inevitably has an ethical dimension, that feedbacks are more widespread than generally considered, and that conventional efficiency measures omit important energy input items, particularly those concerned with mining of the materials needed for renewable energy plants. Finally, the key results of this review are summarized, and its limitations are discussed, as is the future research needed to overcome these shortcomings.

Bisphenol-A (BPA) represents an important co-monomer for obtaining polycarbonate, epoxy resins, flame retardants, in paint, and other chemicals products. Products containing BPA are widely used, and thus, we can find it in the environment: in the air, in the soil, in natural surface water and in sediments, underground water in landfills, and in wastewater. BPA disturbs human and animals’ health. This influences the enzymatic, androgenic, neurological, liver and reproductive systems at different stages of human life: like in fetal stage, children and adults’ stages. Taking these inconveniences into account, it is very important to remove BPA from water. Ultrasonic technology can be considered a verry sustainable and efficient method to remove BPA from water. The advantages of this method is easy to implement on existing water treatment and purification facilities, it does not produce residual compounds that produce sludge, the time required for degradation is of the order of 1-2 hours and the level of degradation is very high. In this work, we presented the studies on the efficiency of ultrasonics under air atmosphere on the degradation of BPA. The influence of the frequency and of some additional compounds such as carbon tetrachloride, FeSO4 7H2O (FS), and ethyl anthraquinone (EAC) was studied. Three different frequencies were used: 1146 KHz, 864 KHz, 580 KHz, at a power of 50 W. It was identified the efficiency of BPA degradation over a period of 60 minutes, with sampling every 15 minutes. Using the LC-MS/MS technique, the degradation compounds were identified that result from the application of ultrasound processes. Pathways of BPA degradation were also proposed.

Advanced composite materials have drawn significant interest in the last years as an alternative to traditional materials due to their higher performance. However, industry struggle to provide low-cost, higher occupational safety, lower footprint with composites, making them suitable for holistic analyses. Therefore, the material design becomes an essential element that can impact the competitiveness, particularly in terms of productivity, circularity, safety, sustainability, and quality of the value chain. The Material Design-for-eXcellence is a state-of-art methodology for material performance multi-dimensional assessment along its life cycle phases, either useful to support ma-terial selection for new products or also to new material design support optimizing resource effi-ciency. In this methodology, the material behaviour and its multiple characteristics assessment, and the manufacturing processes efficiency are evaluated. The framework considers the analogy of product design holistic approaches, as Lean Design-for-X, to organize and assess the mul-ti-dimensional performance for each “X” Material Property. In this work, it was possible to observe that the bio-based composites solutions could be a good sustainable alternative for several sectors. Every day researchers are creating more new materials, having a diversity of properties at different scales, Material Design-for-eXcellence must also in the near future consider other factors. Hence, additional studies are thus foreseen to explore and develop this new tool.

A platform for indoor monitoring inside buildings, integrating both conventional and environmentally friendly devices with energy-harvesting sources, is proposed. Biomaterials such as gelatin and chitosan, derived from renewable resources, have been utilized to fabricate hydrogel and active layers for sensors and supercapacitors. These devices enhance the environmental profile of the proposed solution by employing sustainable materials and optimizing energy consumption. The developed electronic board prototype provides a versatile platform for testing various sensor configurations while accommodating different energy-harvesting sources. The article details the design of an energy harvesting system for indoor monitoring, covering various aspects regarding energy sources, power management circuits, and low-power microcontroller units. It examines energy storage devices and sensors, including both eco-friendly and commercial ones, as well as radio transceivers with different communication technologies. Additionally, an energy analysis to evaluate the performance and energy efficiency of the platform is presented.

The paper presents modelling of relationships between wind velocity distributions observed in Poland and technical requirements for wind power stations design. The wind velocities distributions for various locations in Poland are determined, and expressed in Weibull distribution parameters. Theoretical computations concerning the dependence of wind power station as function of wind speed and aire physical properties are presented. Conclusions important for design of power stations fitted to atmospheric conditions in Poland are given. Wind power plants have been an important source of electricity generation for many years.Wind power modelling with the use of wind speed is used to improve the accuracy of forecasts and analyses of the power production of wind farms.

The Voltammetric and polarographic methods are proposed to determine the short time corro-sion rates of brass in 1N HCl solution. It should be noted that it is also possible to determine the corrosion rates of each species present in the solution, simultaneously like Cu (II) and Zn (II) in brass. Samples extracted from bark of Babul (ESBB) is used as corrosion inhibitors. The corrosion inhibition efficiency is 96% at 24h after the test started. These results are compared with the av-erage corrosion rates obtained by using gravimetric (PIT) and some electrochemical methods i.e. galvanostatic and potentiodynamic polarization measurements.

This paper describe a procedure to measure experimentally the power coefficient, Cp, of winged seeds, and apply this technique to seeds from the Norway maple (Acer platanoides). We measure Cp=56.9±2% at a tip speed ratio of 3.21±0.06. Our results are in agreement with previously published CFD simulations that indicate that these seeds – operating in low-Reynolds number conditions – approach the Betz limit (Cp=59.3%) the maximum possible efficiency for a wind turbine. In addition, this result is not consistent with the recent theoretical work of Okulov & Sørensen, which suggests that a single-bladed turbine with a tip-speed ratio of 3.2 can achieve a power efficiency of no more than 30%.

In this paper, we identify issues and possible solutions in the key area of large-scale antenna systems, also know as Massive Multiple Input Multiple Output (MIMO) systems. Additionally, we propose the use of Massive MIMO technology as a means to tackle the uplink mixed-service communication problem. Under the assumption of an available physical narrowband shared channel (PNSCH), the capacity of the MTC network and, in turn, that of the whole system, can be increased by grouping Machine-Type Communication (MTC) devices into clusters and letting each cluster share the same time-frequency physical resource blocks. We study the feasibility of applying sub-optimal linear detection to the problem of detecting a large number of MTC devices sharing the same time-frequency resources at the uplink of a base station (BS) equipped with a large number of antennas, M. In our study, we derive the achievable lower-bound rates for the studied sub-optimal linear detectors and show that the transmitted power of each MTC device can be reduced as M increases, which is a very important result for powerconstrained MTC devices running on batteries. Our simulation results suggest that, as M is made progressively larger, the performance of sub-optimal linear detection methods approach the matched filter bound, also known as perfect interference-cancellation bound.

The production of olives and olive oil in the Mediterranean region is one of the most important cultivation. The continuous changes of the European Common Agricultural Policy (CAP) towards strengthening the influence of market forces, has increased the necessity for assessing the efficiency of production protocols or patterns being implemented by the farmers. The case of olive trees cultivation, despite the fact that it is very important for both farmers and consumers, has not been in depth analyzed regarding the efficiency of inputs being used during the production process. This study evaluates the efficiency rates of 100 agricultural holding specialized on olive trees cultivation in Greece, by implementing a DEA input oriented model. The inputs being used are land, fertilizers, agrochemicals, labour, and energy. The output being used is the revenue of each holding. The results quantify the significant differentiation of efficiency scores, providing evidence that there is space for restructuring the production process, in order to improve efficiency and decrease by this way the production cost of inefficient farmers.

This article presents a novel sustainable business management technique, emphasizing description and estimation over the outdated profit metric. Due to the intricacies and challenges of implementing the 2019 capital management method based on capital valuation (implemented in 2020–2022), a simpler approach became essential. While it is plausible for organizations to implement capital management based on their valuation, undertaking it with no outside help presents a challenge. The new descriptive method is fundamentally distinct in that detailed monetary valuations of capitals are omitted in favor of description and estimation. This paper establishes the groundwork for applying the new approach in several stages and introduces three new management indicators—the overall accomplishment of management goals index (evaluating management efficacy), the capital level index, and the adjustment (compliance) index—replacing the profit metric. Noteworthy advantages include separating the assessment of management outcomes from the organization's condition, including human and social capital into efficiency evaluations, and removing the profit indicator for management purposes, which prevents resource waste and enhances company efficiency and effectiveness.

The efficiencies of conventional triple organic Rankine cycle (TORC) configurations are restricted by the low critical temperatures of common working fluids (＜320 °C). This paper proposes a high-temperature TORC system. A near-azeotropic mixture biphenyl/diphenyl oxide (BDO), which has stellar track record in the high-temperature ORC applications, is innovatively adopted as the top and middle ORC fluid simultaneously. The top cycle evaporation temperature is up to 400 °C in view of BDO’s high stability. Five conventional organic fluids are chosen for the bottom ORC. Fundamentals of the TORC system are illustrated, and mathematical models are built. Thermo-economic performance is investigated. The results hint that the optimal thermodynamic property is achieved on the use of benzene as the bottom fluid. The maximum thermal and exergy efficiencies are respectively 40.86% and 74.14%. The largest irreversible loss occurs inside the heat exchanger coupling the middle and bottom ORCs, accounting for above 30% of the total entropy generation. The levelized energy cost (LEC) is 0.0284 $/kWh. Given the same heat source condition, the TORC system can boost efficiency by 1.02% and drive down LEC by 0.0024 $/kWh compared with a BDO mixture-based cascade ORC.

The vehicles number continuously growing lead to increasingly intense and congested traffic and it will additionally demand the braking system, and drivers behave more aggressively and as result is required that the braking system to be durable and efficient. For this is necessary the study the braking system behavior in conditions of intense and moderate traffic to increase the safety of traffic participants, respectively to demonstrate the need for more frequent replacement of some braking system elements. Thus, on a vehicle were performed a series of successive tests, through which the degree of wear of the brake pads and discs was monitored periodically and as a result the efficiency evolution of the braking system. The tests were carried out both in laboratory (on dynamometer) and in traffic to establish the efficiency of the braking system according to some parameters considered essential. The experimental tests showed that the recommendations regarding the frequency of replacement of brake pads and disks are inconsistent with their actual wear. Therefore, the aim of this paper is the establishment of the braking system efficiency of an auto-vehicle, subject to testing depending on the auto-vehicle mass, travel speed, distance driven, and braking time, based on experimental on stand and in-traffic tests, according the road safety regulations.

At present, the health systems of many countries face complex challenges even if their priority objectives remain the same - to provide sustainable health systems at the current and the prognostic demographic changes and requirements in a health system. The quality and the efficiency of healthcare delivery and their mutual conformity have been brought to public attention. Similarly, the quality and the efficiency of an entire process depends on the instrumentation and its procurement that represents a significant economic and procedural issue in the healthcare systems for a long time. Many reports of the public procurement processes and research studies declare this fact. The primary aim of this study is to evaluate the public procurement efficiency in the health system by means of the valuation approach, or savings’ estimates that are achieved by the public procurement. The savings were defined as a percentage difference between the estimated and the final contract price. The secondary objective is to examine an influence of selected variables on a creation of savings in the public procurement process by means of a regression analysis. The researched variables are as follows: time, method, procurement, NUTS level of procurement, Common Procurement Vocabulary Code, number of offers. The analysis results showed interesting findings. The number of offers has a significantly positive impact on the savings. It means that if the number of offers increases by one unit, the savings will increase by 15.6%. Also, time variable (year) has a positive impact on the savings. Consequently, it may be assumed that the public procurement process is improving from a time perspective. It may be partially caused by the fact that a new public procurement legislative has been valid since 2015. The NUTS level has also an impact on the savings in relation to the public procurement. The public procurements which took place at the level of a state were more beneficial as the public procurements at the regional level. Also, the procurement method was statistically significant parameter of a regression analysis. The competition actions together with a negotiation process created higher savings in comparison to tenders. In case of the CPV codes, the most significant savings were achieved in the group of ‘various medicinal products’. The study’s results provide a valuable knowledge for the creators of policies and a realization of the national strategic plans within the health system. Also, these results support a creation of national and international benchmarks in this area and a networking of international partnerships in the area of a public procurement that focus on a development of methodologies and comparative platforms creation.

The continuous energy transformation processes in heating, ventilation and air conditioning systems of buildings are responsible for 36% of global final energy consumption. Tighter thermal insulation requirements for buildings have significantly reduced heat transfer losses. Unfortunately, this has little effect on energy demand for ventilation. On the basis of the First and the Second Law of Thermodynamics, the concepts of entropy and exergy are applied to the analysis of ventilation air handling unit (AHU) with a heat pump in this paper. This study aims to develop a consistent approach for this purpose, taking into account the variations of reference temperature and temperatures of working fluids. An analytical investigation on entropy generation and exergy analysis are used, when exergy is determined by calculating coenthalpies and evaluating exergy flows and their directions. The results show that each component of the AHU has its individual character of generated entropy, destroyed exergy and exergy efficiency variation. However, the evaporator of heat pump and fans have unabated quantities of exergy destruction. The exergy efficiency of AHU decreases from 45-55% to 12-15% when outdoor air temperature is within the range of –30°C…+10°C, respectively. This helps to determine conditions and components of improving the exergy efficiency of the AHU at variable real-world local climate conditions. The presented methodological approach could be used in the dynamic modelling software and contribute to a wider application of the Second Law of Thermodynamics in practice.

Load balancing, energy efficiency and fault tolerance are among the most important data dissemination issues in Wireless Sensor Networks (WSNs). In order to successfully cope with the mentioned issues, two main approaches (namely, Data-centric Storage and Distributed Data Storage) have been proposed in the literature. Both approaches suffer from data loss due to memory and/or energy depletion in the storage nodes. Even though several techniques have been proposed so far to overcome the mentioned problems, the proposed solutions typically focus on one issue at a time. In this paper, we integrate the Data-centric Storage (DCS) features into Distributed Data Storage (DDS) mechanisms and present a novel approach, denoted as Collaborative Memory and Energy Management (CoMEM), to overcome both problems and bring memory and energy efficiency to the data loss mechanism of WSNs. We also propose analytical and simulation frameworks for performance evaluation. Our results show that the proposed method outperforms existing approaches in various WSN scenarios.

This study empirically analyzes the effectiveness of resource optimization utilizing artificial intelligence (AI) within cloud computing environments. It compares systems that have been transitioned from a Monolithic structure to Microservices Architecture (MSA) with those adopting a simple Rehost strategy, to validate the operational efficiency of two systems whose resource efficiency has been enhanced compared to traditional legacy systems. The research is based on systems that determined resource efficiency post-cloud migration using APM tools. It points out the limitations of traditional heuristic operation methods in resource optimization, which lead to issues such as application performance degradation, resource over-allocation, and increased operational costs. This study aims to overcome the conventional resource optimization standards that depended on the average peak usage of CPU and memory infrastructure, by introducing AI-based optimization tools, and applying on-premise standards to cloud and container environments to achieve resource optimization. The paper emphasizes the importance of resource optimization through AI-based automation tools, exploring the possibilities of resolving real-world application performance issues in cloud environments, reducing unnecessary resource usage costs, and cutting down on labor risks and operational expenses. Through this, it presents strategic directions on how AI technology can offer financial and operational advantages in managing cloud resources.

Deploying Cellular Internet of Things (CIoT) devices in urban and remote areas faces significant energy efficiency challenges. This is especially true for Narrowband IoT (NB-IoT) devices, which are expected to function on a single charge for up to 10 years while transmitting small amounts of data daily. The 3rd Generation Partnership Project (3GPP) has introduced energy-saving mechanisms in Releases 13 to 16, including Early Data Transmission (EDT) and Preconfigured Uplink Resources (PUR). These mechanisms extend battery life and reduce latency by enabling data transmission without an active Radio Resource Control (RRC) connection or Random Access Procedure (RAP). This paper examines these mechanisms using the LENA-NB simulator in the ns-3 environment, which is a comprehensive framework for studying various aspects of NB-IoT. The LENA-NB has been extended with PUR, and our analysis shows that PUR significantly enhances battery life and latency efficiency, particularly in high-density environments. Compared to the default RAP method, PUR reduces energy consumption by more than 2.5 times and increases battery life by 1.6 times. Additionally, PUR achieves latency reductions of 2.5-3.5 times. The improvements with PUR are most notable for packets up to 125 bytes. Our findings highlight PUR’s potential to enable more efficient and effective CIoT deployments across various scenarios. This study represents a detailed analysis of latency and energy consumption in a simulated environment, advancing the understanding of PUR’s benefits.

Link prediction is a fundamental problem in graphs. Currently, SubGraph Representation Learning (SGRL) methods provide state-of-the-art solutions for link prediction by transforming the task into a graph classification problem. However, existing SGRL solutions suffer from high computational costs and lack scalability. In this paper, we propose a novel SGRL framework called Augmented Feature Diffusion on Sparsely Sampled Subgraph (AFD3S). The AFD3S first uses a conditional variational autoencoder to augment the local features of the input graph, effectively improving the expressive ability of downstream Graph Neural Networks. Then, based on a random walk strategy, sparsely sampled subgraphs are obtained from the target node pairs, reducing computational and storage overhead. Graph diffusion is then performed on the sampled subgraph to achieve specific weighting. Finally, the diffusion matrix of the subgraph and its augmented feature matrix are used for feature diffusion to obtain operator-level node representations as inputs for the SGRL-based link prediction. Feature diffusion effectively simulates the message-passing process, simplifying subgraph representation learning, thus accelerating the training and inference speed of subgraph learning. Our proposed AFD3S achieves optimal prediction performance on several benchmark datasets, with significantly reduced storage and computational costs.

Remote work as a new working pattern is considered of high importance in determining the competitiveness of the institutions that adopt this form of work. This trend toward remote working has benefited workers greatly in terms of flexibility and work-life balance and has had unanticipatedly positive effects on sustainability. The issue has grown in importance considering recent development of digitalization and high concern of countries to achieve the sustainable goals. This study attempts to examine the effect of three explanatory variables: remote work, institutional efficiency, and work management on the competitiveness of finance institutions in Saudi Arabia. To collect the primary data, a survey was conducted on a stratified random sample that comprised 1270 respondents. The sample covers the three finance sector segments: banks, insurance, and finance companies. Correlation analyses, one-sample t-tests, and multi-regression analyses are applied to analyze the data. The results of the study showed that there is a positive significant relationship between the three explanatory variables of the study and institutional competitiveness. Besides, the regression model revealed that the two explanatory variables; remote work and institution efficiency are statistically significant at 95% confidence intervals, while work management is not statistically significant. The study recommends promoting remote work to increase the finance institution's competitiveness by restructuring the work policies, designing work strategies, and introducing a new management system compatible with remote work.

Under the background that the international technological innovation environment VUCA has been intensifying and the innovation situation of Chinese manufacturing enterprises has been impacted, the innovation dilemma faced by enterprises has attracted increasing attention, while the innovation dilemma is also one of the important factors affecting the operation efficiency of enterprises. Based on the micro-data of China’s A-share manufacturing listed enterprises, this paper empirically analyzes the impact of innovation dilemmas faced by enterprises on operational efficiency (innovation dilemmas are measured by the difference when actual innovation performance is lower than expected innovation performance). The results show that the innovation dilemma of manufacturing enterprises significantly inhibits the operational efficiency of manufacturing enterprises by reducing their risk tolerance, development ability expectation and profitability. After using a series of tests, such as instrumental variable method, propensity score matching method, DID (Differences-in-Differences) and changing variable measure method, the conclusion is still robust. In addition, the inhibitory effect of innovation dilemma on enterprise operation efficiency is more obvious for private enterprises, small and medium-sized enterprises, enterprises in the ascend or decline phase, high-tech enterprises and enterprises in the eastern region. Therefore, the government should strengthen the policy support for the manufacturing enterprises in the innovation dilemma, help the enterprises to overcome the innovation bottleneck. Manufacturing enterprises themselves should enhance their innovation capabilities and strive to get rid of the innovation dilemma in order to maintain a stable footing in the fierce market competition and improve the high-quality development of China’s manufacturing industry.

The changing of banking customer preferences after Covid-19 pandemic encourages banking transformation. Neobanks emerges as innovation in banking that enter the market to compete with the incumbent banks by offering new digital experience for customer. This paper analyzes the neobanks which transformed from traditional bank, specifically its efficiency after they implement digital transformation. Efficiency is measured by using Stochastic Frontier Analysis (SFA). This study also uses Pooled Mean Group (PMG) of Panel ARDL (Autoregressive Distributed Lagged) to investigate digital transformation as one of determinants neobank’s efficiency, as well as to examine the existence of short-term and long-term relationship between digital transformation and efficiency. The SFA results show that the efficiency of the neobanks increase after they carry out digital transformation. Furthermore, from PMG Panel ARDL, it can be concluded that digital transformation is one of determinant of efficiency and there is longevity relationship between digital transformation and efficiency. In the short run, digital transformation has a significant and negative correlation with efficiency and in the long run, it has a significant positive relationship because initially digital transformation cost for operational and risk management innovation decreases the profit efficiency, but afterwards it increases the profit efficiency.

As technology continues to play a central role in shaping global industries, the performance of technology firms on the NASDAQ has significant implications for broader economic trends. Investors, facing an increasingly complex landscape, require detailed insights to make informed decisions and navigate market volatility. Moreover, amid the ongoing digital transformation, understanding the operational dynamics of technology companies is critical for policymakers and regulatory bodies to create frameworks that foster innovation while ensuring market stability. In the current context, characterized by rapid technological advancements, market uncertainties, and evolving consumer demands, the need for a comprehensive study on the operational efficiency of NASDAQ-listed technology companies is more pertinent than ever. Objective of our study is to identify relationships and patterns among selected financial metrics to assess the operational efficiency of NASDAQ-listed technology companies between 2011 to 2023. Financial metrics used in the study include following variables namely revenues, cost of goods sold, operating expenses, research, and development expenses, selling and general administrative expenses, and operating income. Johansen's cointegration methodology is employed to unveil long-term relationships and equilibrium adjustments among the considered variables. Results of our study underscore the paramount importance of efficiently managing the cost of goods sold (COGS) for achieving superior operating performance among these leading technology firms. The findings point to a nuanced interplay among these operational metrics, highlighting the interconnectedness and sustained relationships among them. This suggests that the top technology companies exhibit a sophisticated understanding of the dynamics between these variables, allowing them to navigate the complexities of the industry with strategic finesse.

"Hydrogen is an extremely promising energy carrier, poised to become a commercially viable product in the coming years. However, there are significant hurdles that need to be addressed. One such challenge is the high energy consumption during the electrolysis process, which is used to produce hydrogen. Furthermore, the co-production of CO and CO2 during steam hydrocarbon reforming adds to the complexity. Finding innovative solutions to these issues is crucial for the widespread adoption of hydrogen as a clean and efficient energy source." Simultaneously, various industries have the capability to generate hydrogen as a by-product, each with differing levels of purity. For instance, sodium and chlorine production plants have the potential to produce high-purity hydrogen. On the other hand, digester and sewage gas can yield low-purity hydrogen. In both instances, there is an economic incentive to utilize this hydrogen for energy production or to inject it into existing natural gas pipelines A brief estimation of the technical potential of utilizing hydrogen from various sources in Nigeria, specifically for fuel cell usage, has been conducted. Moreover, resource potential visualization maps have been generated to help visualize the availability and distribution of these hydrogen sources throughout the country.

Convolution, recurrent and attention-based deep learning techniques have produced the most recent state-of-the-art results in multiple sensor-based human activity recognition (HAR) datasets. However, these techniques have high computing costs, restricting their use in low-powered devices. Different methods have been employed to increase the efficiency of these techniques; however, this often results in worse performance. Recently, pure MLP architectures have demonstrated competitive performance in vision-based tasks with lower computation costs than other deep-learning techniques. The MLP-Mixer is a pioneering pure MLP architecture that produces competitive results with state-of-the-art models in computer vision tasks. This paper shows the viability of the MLP-Mixer in sensor-based HAR. Furthermore, experiments are performed to gain insight into the Mixer modules essential for HAR, and a visual analysis of the Mixer’s weights is provided, validating the Mixer’s learning capabilities. As a result, the Mixer achieves an F1 score of 97%, 84.2%, 91.2% and 90% on the PAMAP2, Daphnet Gait, Opportunity Gestures and Opportunity Locomotion datasets, respectively, outperforming state-of-the-art models in all datasets except Opportunity Gestures.

In recent years, exterior-rotor brushless DC motors have become increasingly popular in robotics applications due to their compact shape and high torque density. However, these motors were originally used for continuous operation in drones. For applications such as exoskeletons, prostheses, or legged robots, short bursts of high power are often required. Unfortunately, vendors do not typically provide data on the motors' performance under these conditions. This paper presents experimental data on the torque-speed relationship, efficiency, and thermal responses of one of the most widely used outrunner-type brushless motors across its full operating range, including high-power, short-duration operation. The results of this study can inform the selection and design of actuators for a range of robotics applications, particularly those that require high power output for brief periods of time.