This paper introduces actual considerations on the progressive disuse of residential space in the Alpine territory, considering possible actions. Nowadays, the building complexes built around the 60s and 70s (symbol of the mass tourism) fell to be suffering and searching of a new identity: the generation of owners, who bought them, has aged and the propensities of the new generations for holiday in those places have changed, which, moreover, now offer fewer opportunities for leisure, particularly in winter. Due to the great attention (and seeming opportunities) of current incentive policies towards the energy improvement of the existing stock, authors investigate the private conveniences of transformations through the refurbishment of these buildings. Starting from the study of the territory and the dynamics of local population, the research analyses a possible set of energy works, based on the 110% Superbonus tax incentive, introduced by L.D. 34/2020. A large part of the insights is focused on technical and economic feasibility study of the possible actions, following a process based on the evolution of the legislation. The work carried out is based on a specific case study, located in a small municipality in Piedmont mountain area, consisting of three apartment blocks of mostly second homes. The adopted methodology lends itself as a guide for the feasibility study of the Superbonus and, used as a tool for policy evaluation, leads to interesting results from the point of view of both private and public convenience.

This study evaluated the grain size and high organic content from drinking water treatment sludge (DWTS) in the properties of ceramics. Samples were studied using raw and oven dried DWTS at 110 °C in two granulometries (0.180 mm and 0.075 mm), with and without calcination (550 °C), as partial replacement of two soils commonly used in ceramic production. Specimens were prepared with 5, 10, and 20% DWTS and calcined at 950 °C to determine their chemical, physical, mineralogical and mechanical properties. The DWTS reduced the density and increased the absorption and shrinkage of the specimens after calcination. An increase in strength with up to 10% sludge, driven by the presence of fluxing agents, was verified. The processing method had little influence on the properties of ceramic with above 10% of sludge. In conclusion, the use of raw DWTS obtained better results with low energy usage for its reuse.

Covid-19 is a disease caused by SARS-CoV-2, which has spread worldwide since the beginning of 2020. Several pharmaceutical and non-pharmaceutical strategies were proposed to contain the virus dissemination, including vaccination and lockdowns. One of the consequences of the pandemic was the denial or delay of access to convenient health care services, but also potentially the increase of adverse events within those services, like the number of hospital infections. Therefore, the main question here is: What happened to the performance and sustainability of hospitals? The main goal of this work was to test if the Portuguese public hospitals' performance has been affected by the SARS-CoV-2 pandemic. We used the Benefit-of-Doubt method integrated with the Malmquist Index to analyze the performance evolution over time. Then, we employed a multiple regression model to test whether some pandemic-related variables could explain the performance results. We considered a database of 40 Portuguese public hospitals evaluated from January 2017 to May 2022. The period 2017 to 2019 corresponds to the baseline (pre-pandemic), against which the remaining period will be compared (during the pandemic). We also considered fourteen variables characterizing hospital quality, divided into three main performance definitions (efficiency and productivity; access; safety and care appropriateness). As potential explanatory variables, we consider seven dimensions, including vaccination rate and the need for intensive care for Covid-19 infected people. Results suggest that Covid-19 pandemic features help explain the drop on access after 2020, but not the evolution of safety and appropriateness of care, which surpris-ingly increased the whole time.

Nature provides plenty of good examples for simple and very efficient joint assemblies. One example is the enormously flexible cervical spine of American barn owls, which consists of 14 cervical vertebrae. Each pair of vertebrae produces a comparatively small individual movement in order to provide a large overall movement of the entire cervical spine. The biomimetic replication of such joints is difficult due to the delicate and geometric unrestricted joint shapes as well as the muscles that have to be mimicked. Using X-ray as well as micro computed tomography images and with the utilisation of additive manufacturing, it is possible to produce the owl neck vertebrae in scaled-up form, to analyse them and then to transfer them into technically usable joint assemblies. The muscle substitution of these joints is realised by smart materials actuators in the form of shape memory alloy wire actuators. This actuator technology is outstanding for its muscle-like movement and for its enormous energy density [1,2]. The disadvantage of this wire actuator technology is the low rate of contraction, which means that a large length of wire has to be installed to generate adequate movement. For this reason, the actuator wires are integrated into additively manufactured carrier components to mimic the biological joints. This results in joint designs that compensate for the disadvantages of the small contraction of the actuators by intelligently installing large wire lengths on comparatively small installation spaces, while also providing a sufficient force output. With the help of a test rig, the developed technical joint variants are examined and evaluated. This demonstrates the technical applicability of this bionic joints.

This study aims to understand the reality of Village-Owned Enterprises and their implications for rural communities. The focus of this research is to explore the role of Village-Owned Enterprises in carrying out their role as an engine for driving the economy of people in rural areas. Village-owned enterprises have turned into competitors for small rural enterprises. This research uses a qualitative approach, and the informants from Village-Owned Enterprises are the Chairman, Secretary, and Treasurer. Village-owned enterprises become a medium for rural business groups to develop economic potential. The results of the study indicate that the business fields that village-owned enterprises develop have in common with small businesses of rural communities, so it interferes with the sustainability of local communities' businesses. The development of Village-Owned Enterprises is based on building a business chain by involving local economic groups so that the sustainability of community economic business activities impacts the economy of rural areas. Practical implications — Provide academic considerations for regulators to evaluate and reorganize the role of Village-Owned Enterprises for the sustainability of small rural businesses.

The present paper investigates the 'soft' determinants of social environmental sustainability of the country. A three-dimensional research approach, covering the education system and educational culture; socio-economic integration; and the legal system and the importance of public administration and citizenship, was utilized. A cross-sectional survey of 1,021 respondents and a structural equation modelling were selected as main research tools. Lithuania served as an empirical basis for the research. It was revealed that the most important factors in shaping the modernisation of the country through the lens of social environmental sustainability are the participation of citizens in social communities and social activities. Factors that need improvement are public participation and tolerance for the disabled.

This exploratory study examined the impacts of COVID-19 and emerging challenges and opportunities from aviation recovery. Using archival and secondary data analysis, the study found that there are several challenges to aviation recovery chief among them are labour challenges and extreme weather events, which have been responsible for traffic disruptions in major aviation markets such as Europe and the USA. Other emerging challenges include high debt, inflation, interest rates, fuel, cost of labour, and general operational costs. The study recommends several interventions to address the sector’s challenges, including adopting risk disaster preparedness and management to foster sustainability.

This study proposes a structure for companies to use when implementing human resource practices in open innovation. Despite the fact that open innovation has received a lot of attention in the innovation management field as companies open their doors to information exchange in an effort to spur creative thinking, there are very few empirical articles that connect this trend to the human resource management literature. Our findings are the result of an extensive qualitative investigation into Julphar Gulf Pharmaceutical Industries Manufacturers in the United Arab Emirates (UAE) and its open innovation program. Internal, external, and combined are the three primary pillars of human resource management. We also demonstrate how the evolution of the open innovation initiative is linked to the state of the art in HRM and open innovation literature. The framework identifies HRM practices for both internal and external participants in the open innovation effort. Much of this HRM is done off the books, in a setting separate from the host company. By providing actual evidence of how firms use HRM to manage open innovation projects, our research adds to the scant and mostly theoretical literature linking open innovation and HRM.

Solar energy (SE) is essential for decarbonization of our economy and for energetic transition. Solar energy can be a sustainable economic activity as long as a balance is struck between the benefits it brings to climate change mitigation and the damage it can cause to biodiversity and ecosystems. Here we study this balance in an area with high biodiversity under pressure for installation of numerous photovoltaic plants (PPs). Our results show that developers give priority to the cheapest land close to connection points, while other values (e.g., environmental, landscape) are secondary. The regulatory process carried out by the Administration does not ensure the preservation of natural values, as several PPs with a high impact on important conservation areas have been approved. Experts' allegations provide quality information to the Administration to evaluate and demand changes to the projects presented. Such demands show that companies are willing to relocate plants to land occupied by olive groves. In this way, greater efficiency is achieved in land occupation, as well as shorter evacuation lines, water savings and less environmental impact. Prior strategic territorial planning could have avoided the impact of PPs already built, made the deployment of new PPs compatible with biodiversity conservation, and contributed to improving the management of key resources, such as subway aquifers. The proposed regulatory changes to the environmental assessment procedure (exclusion of renewables and public participation from the procedure) are detrimental, as they will make SE unable to meet the requirements of the Taxonomy Regulation.

The goal of this study is to develop a global analysis, based on data from 2015 to 2022, that clarifies the impact of containment policies (e.g., lockdown and quarantine) for Coronavirus Disease-2019 (COVID-19) on the air pollution between countries of different continents. In this context, average changes of CO, NO2, SO2, O3, PM2.5, and PM10 concentrations based on measurements at ground level in January, February, and March for 2019, 2020, 2021, and 2022 are compared with average values of 2015-2018 period between 300 cities of 19 countries in 5 continents. Results show that the maximum reduction in pollutant concentrations during this period is given by: CO (-4,367.5%) in France, NO2 (-150.5%) in China and Australia, SO2 (-154.1%) in Israel, O3 (-94.1%) in China, PM2.5 (-41.4%) in Germany and PM10 (-157.4%) in Turkey. Findings reveal that the effects of containment policies on air quality vary significantly between countries depending on different geographical characteristics of regions. This study has main environmental policy implications because it clarifies the critical role of severe control measure to reduce air pollution and support sustainable environment and development.

Many pigments and dyes are not only valuable molecules in manufacturing, but also pollutants. Science has certainly been producing sustainable alternatives to counter the issue of dyes, but this is not enough. There is also a need for change in the business attitude and leadership approach of the organizations that operate in the industry. Only through the successful combination of new technologies and forward-looking decision making, it will be possible to alter the status quo and deal with the multiple environmental and supply chain challenges that these businesses are and will be facing. With a focus on colorants, this critical review article will reflect on the importance of both a biotechnological approaches and sustainable leadership to achieve a sustainable, forward-looking fashion industry.

Offshore grids can have a key role in the transition of the energy system to sustainability. Although they require extensive infrastructure investments, they open up for the exploitation of additional resources and may be important to provide for part of the increasing electricity demand driven by sector coupling. This paper quantifies the socio-economic value of offshore grids and identifies their major drivers, performing energy system optimization in a model application of the Northern-central European energy system and the North Sea offshore grid towards 2050. The increasing wake loss with the size of hub-connected wind farms is integrated in the modelling. We find that without sector coupling no offshore grid may develop, and that the higher the level of sector coupling, the higher the value of offshore grids. Therefore, it can be strongly stated that offshore grid infrastructure development should not be discussed as a separate political topic, but seen in connection to sector coupling.

Analytical study presents the evolution and change in content over time and the emergence of different sustainable tourism (ST) concepts in tourism and hospitality. For this purpose, a Comparative Automated Content Analysis (ACA) analyses scientific articles published between 1990, when the first article in this field was published in the Web of Science (WOS), and the end of 2020. With the ACA for analysis papers research, this research helps explain why and how changing business models cross the time, organizational processes, importance of information and communication technologies in sustainable tourism strategies, green investments, sustainable standards in tourism and hospitality, and sustainable reporting.

Sustainability is very important in business. The residential high-rise building all firms wanted to successful and sustainability in business. There is need the construction to completed low time, low cost and high quality in construction work. Therefore, real estate developers must find various strategies to use in construction projects to achieve goals and success of the firm. The purpose of this study was to indicate the very importance of knowledge management can lead to sustainability in business. Analyze 14 critical success to sustainability in residential high-rise building projects, collected questions from literature review, and survey in deep interview senior managers of 15 projects real estate development firms listed on the stock market of Thailand. Budget building more than 1000 million baht per project. From conceptual frame work five foundations integrated to knowledge management of critical success (KMITL PROCESS) used made tool survey in deep interview the critical success to sustainability in residential high-rise building project from project managers. Used IBM SPSS evaluated the critical success to sustainability. Found was one very important of critical success to sustainability, which was quality of products x̄ = 4.83. All 14 critical success to sustainability was found can applied made the knowledge management of critical success to sustainability in residential high-rise building project in firm. Especially in the field of construction managements project can used improve of all construction projects.

Rural clean heating project (RCHP) in China aims to increase flexibility in the rural energy system, enhance the integration of renewable energy and distributed generation, and reduce environmental impact. While RCHP-enabling routes have been studied from a technical perspective, the economic, ecological, regulatory, and policy dimensions of RCHP are yet to be analysed in depth, especially in the underdeveloped areas in China. This paper discusses RCHP in rural Gansu in a multi-dimension approach. We firstly focus on the current issues and challenges of RCHP in rural Gansu. Then the RCHP-enabling areas are briefly zoned into six typical regions based on the resource distribution in Gansu Province, and a matching framework of RCHP is recommended. Then we focus on the economics and sustainability of RCHP-enabling technologies. Based on the medium-term assessment of RCHP in the demonstration provinces, various technical schemes and routes are analysed and compared so as to be adopted in rural Gansu. In addition to technical and economic effects of those schemes, the corresponding ecology, policy, finance, and market implications are also concerned. We briefly discuss how the national regulators incentivise the implementation of RCHP in rural Gansu. Major barriers to RCHP are identified as the sustainability of technology, economy, ecology, policy, finance, and market. Subsequently, some policy solutions to overcome these barriers are proposed.

Indonesia is an interesting case study for students of sustainable development and sustainable energy due to its ability to connect the multiple “worlds” it has become part of. Indonesia is an important bridge to Muslim countries, the voice of the Global South in the G20 and a main pillar of the 134-country-strong G77. Indonesia’s development trajectory is also key to the achievement of the Paris Climate Agreement as well as of the 2030 Agenda. Students can learn from how Indo-nesia address contradictions that would have been unsurmountable for other countries. Indone-sia’s energy transition offers helpful lessons, because of its aspiration to become a developed country by 2045. This goal is only possible when a country is able to effectively address barriers and caveats to sustainable energy. It is interesting how Indonesia focuses on silver linings and come up with pragmatic solutions to energy-related issues. This is followed by the “teaching guide,” which provides recommendations how the lessons from Indonesia can be embedded into a learning experience. The “learning activation approach” is introduced, which encourages stu-dents to systematically reflect on the complexity of selected contexts and understand this com-plexity by looking at the technical issues and processes that allow decision-making.

Small boat fishers are often the lifeblood of remote coastal communities in Iceland, contributing to employment, jobs and economic prosperity. This study conducts exploratory but highly practical research into the efficiency of onboard catch handling practices by Icelandic small boat fishers using fish handling tools called automatic jigging machines. Using applied research methods, this study researches whether standardisation of operations could be applied to make catch handling practices on small boats more time and resource efficient, leading to reduced waste, a consistently higher quality product, and potential increases in economic efficiency and sustainability. Thematic analysis, value stream mapping, flow analysis and Kaizen ideology were adopted to identify gaps and continuous improvement opportunities to standardise processes, leading to exemplary performance. Eight core recommendations are identified, seven of which are classed as straight-forward, ‘do now’ measures according to a Kaizen Priority Matrix. These include human and technological interventions in the areas of safety, organisational arrangements, hygiene, fish handling and bleeding, and cooling. Questionnaire responses reveal four main themes of importance to the sub-sector: changes in recent decades; the importance of small boat fishers; education and improvement; and the particularities of the sub-industry. The latter include the perception of a ‘race against time’ to land the catch, an issue that sometimes contributes to sub-optimal catch handling practices. Although this study has decidedly practical connotations for small boat fishers, its outcomes are also likely to be of interest to academics, particularly those focused on the organisational management of natural resources and general applications of the project management methodology and applied research methods as a means of solving practical problems in everyday life.

Protected areas have been used worldwide to conserve natural resources. Nevertheless, economic activities to provide income for communities living inside and surrounding conservation areas remain an issue. This study aimed to assess the sustainability of a Deuterodon iguape hatchery, placed inside an Atlantic Rainforest Park, to leverage this small native fish's grow-out farming, affording income and food security for local families. We have used a set of indicators of economic, social, and environmental sustainability. The initial investment is about US$ 40,000, which returned in ~2 years. The internal rate of return is close to 50%, including the externality costs, which is attractive for public and private investments. The hatchery generated few direct jobs, but the workforce can be recruited in the community, and hatchery can enable the establishment of several small grow-out farms, leveraging the development of indirect jobs and self-employments. The system had a low environmental impact, showing minor release of pollutants, low risk for biodiversity, and absorption of 18 g of CO2 equivalent per thousand post-larvae produced, contributing to the struggle against climate change. Therefore, D. iguape hatchery demonstrates the potential of combining biodiversity conservation and income generation, meeting the Sustainable Development Goals of Agenda 2030.

Climate justice as a commons is conceived as the intertemporal climate equity and equal- ity exchange amongst generations. Sustainability, intended as the interplay amongst the economy, the society, the environment, and the governance, is essential to forge the climate justice theoretical framework. On this base, the study attempts to model intertemporal choice amongst generations in these four domains, making use of an over- lapping generations (OLG) model. The proxies detected are GDP growth (economy), environmental quality (environment), and labor growth, and environmental investment (society) as assumptions. The governance dimension is captured by the di¤erence in wealth between young and old generations. The work aims at replying to the follow- ing research question: Which are the conditions for sustainable development such that climate justice holds? The intra-intergenerational exchange is de…ned in two periods, while the individual provides their preferred economic and environmental choice mix as consumption-saving. This study shows that sustainable growth is achievable only with increased young e¤ort and less leisure and consumption.

The urban museum has become a multi-functional institution that transcends the functional display of artifacts. The museum has become, in cities, a hybrid institution that keeps its doors open late to support a wide variety of special events. This study explored London’s ‘Museum Lates’ programs and event characteristics, using museums’ theoretical views as cultural tourism attractions. Furthermore, the study applied the contextual model of learning to understand visitor attendance motivations. Authors employed an interpretive approach using interviews with two types of participants, event visitors, and event coordinators. Findings suggested that attendees possess a complex of personal, physical, and socio-cultural motivations for participating in museum lates events. The characteristics of late events – extraordinary quality and evening time atmosphere – produce different effects than current museum exhibitions held during regular operating hours. Museum lates events can contribute to achieving cultural sustainability, adding cultural construct to the traditional three-pillars of sustainability. Keywords: Museums; special events; late opening; visitors' motivations; sustainability, touristic attractions

The measures for tackling the COVID-19 may shrink the global GDP by approximately 6% in 2020, the deepest post-war recession. As a result, the global energy demand declined by 3.8% in the first quarter of 2020. Concerning fossil fuels, this conjuncture reduced the demand drastically and collapsed the prices to historic levels. Despite the general market disruptions, renewable energy sources (RES) seem to be more resilient to the crisis because they are the only sources that will grow in demand in 2020, driven by priority dispatch. The RES´s significant growth in cumulative installed capacity in the last two decades and the significant cost reductions of RES and energy storage technologies are positive signs towards better market conditions for the global energy transition. Currently, the crisis is seen by international agencies and transition scholars as an opportunity to advance a renewable-based energy transformation. Nevertheless, this article aims at caution about another possibility: if societal changes are not urgently implemented, the crisis may weaken the global energy transition. This article examines this last possibility from a three-level perspective: 1) post-COVID economic recovery, 2) low oil and natural gas prices and competitiveness of alternative sources and, 3) reorganization of the world energy market and the OPEC+. This paper exists to stimulate debate.

Identifying the determinants of human behavior is useful to adjust interventions and lead the civil society towards a stronger commitment with climate change mitigation and adaptation objectives, achieving greater support for successfully implementing environmental policies. Existing research has largely focused on case studies of pro-environmental behaviors (PEBs) in developed economies but there is yet very little evidence for developing countries. This study provides estimations of the effect of internal factors, such as sociodemographic variables, and four psychological dimensions (climate change knowledge, environmental attitudes, self-efficacy, trust in sources of environmental information) on PEBs. Data was obtained through a survey applied with future decision makers - university students - from Colombia (n = 4769) and Nicaragua (n = 2354). Indices were generated for PEBs and the psychological dimensions using z-scores and Principal Component Analysis. Partial correlations were evaluated through the Ordinary Least Squares method. Our results suggest that, in order to reach the planned emission reduction targets, policy approaches should more strongly focus on educating and motivating citizens and prepare them for contributing to the environmental cause, as well as provide individual solutions to combat climate change, rather than providing only information on its causes and consequences.

Since the 1950s sugarcane production has grown rapidly from less than 0.5 billion tonnes in the late 50s to reach over 1.9 billion tonnes in 2012 on about 27 million hectares of agricultural land. This expansion has been boosted by the high demand for bioethanol promoted as a sustainable bioenergy source which accounted in 2010 for the biggest share of the global biofuel market. Despite its benefits, the scientific debate on sugar is growing especially that counterarguments are so many, including negative impacts on different interacting ecosystems and human well-being, e.g. bigger stress on land and water resources, environmental externalities on air, a harmful impact on the biodiversity and endemic species, negative environmental externalities, health, and socio-economic aspects. This paper provides a narrative systematic review (SR) of the impacts of sugarcane production on these different ecosystems employing the ecosystem services framework for its acceptance by policy-makers. The references included for the SR were 163 and results showed that the majority of the studies are from Brazil, Australia, South Africa and the USA (≈ 75% of the literature), most of them were from peer-reviewed journals (85%), and most of the case studies adopted a quantitative research approach (93%). The literature assessed showed that sugarcane, like all agro-systems, depends on the practices and techniques to transform negative impacts into positive externalities on ecosystems and human well-being. However, the literature studied failed to include the inter-linkage in sugarcane production impacts’ and therefore to evaluate the related ecosystem services with respect to the Millennium Ecosystem Assessment (MA) framework to account for existing trade-offs. Therefore, the findings are addressed to the scientific community and decision-maker for an intensification of interdisciplinary and integrated research based on the MA framework to cover all ecosystem services, for sustainable development of the sugarcane sector.

This paper presents and discusses the pedagogical implication of teaching Shared Value, presenting a case study about a contamination lab namely the case of the Shared Value Living Lab (SVLL) which took place at the University of Torino (UniTO) in Italy. The paper analyzes the pedagogical side of CSV (arguments, topics, learning methodologies, etc.) in the framework of recent theories and approaches of teaching sustainability in business school and in the cooperation between industry and academia, as well. Our research methodology relies on the analysis and comparison of one case study under an intrinsic as it enables researchers to find “interactivity” and connectedness between the individuals participating. The SVLL case is an interesting example of co-creation of social value between academia and its stakeholders. First, it represents an inclusive project linking society and business; second, SVLL acted as a hub putting in contact different interlocutors; third, SVLL training stimulated the acquisition of soft skill in students (interviews, managing relations, represents the project outside university, explaining the project to people, research curiosity) through contamination activities. With our study, we demonstrate the change in students participating in the SVLL may not only be cognitive but also affective, making students feel hopeful, empowered and liberated, and ready to contribute to a more profound change towards the vast array of pro-sustainability behaviors.

According to the growing concern of various focus groups, in regard to the mitigation of the negative impacts generated because of the tourism, has born the interest of proposing sustainable tourism projects derivatives of the feeling within the communities (1) Background: the aim is to propose a differentiated diagnosis of the Subsystems (biophysical and anthropic) and their relationship with traditional-rational knowledge; (2) Methods: from the Theory of Complex Systems was propose the Harmonic Tourism Methodology, that try to correlation the subsystem and knowledge in the community of San Juan Tlahuica Atzingo, State of Mexico (4) Conclusions: Among the most outstanding results that are on the one hand, we must work through tourism projects to the rescue and preservation of natural and cultural resources, reassessing them through the strengthening of social cohesion. On the other hand, the application of this case allowed us to visualize that it is necessary to consolidate the elements and steps of the methodology in order to apply it to different communities that are beginning their journey in the field of the tourism and that can improve and potentiate their resources, seeking harmony between them.

The growing need for water has pressured society and governments to focus more on preservation, planning and management of this natural resource, in which is fundamental to ecosystems and especially to humans. In this sense, the goal of this study was to analyze the national policy of water resources in Brazil and Italy, figuring out aspects that could promote its improvement, aiming at the preservation of water sources, guaranteeing satisfactory quantity and quality. They were carried out in 2019 by the environmental agencies of both countries, listing the main disciplinary regulations. The results show that although they are countries with different realities, they resemble similarities in managerial aspects of water resources, with legislation addressing qualitative and quantitative aspects of water, with guiding principles, instruments and actions aimed at the defence of this natural resource.

Plastics have become an important environmental concern due to their durability and resistance to degradation. Out of all plastic materials, polyesters such as polyethylene terephthalate (PET) are amenable to biological degradation due to the action of microbial polyester hydrolases. The hydrolysis products obtained from PET can thereby be used for the synthesis of novel PET as well as becoming a potential carbon source for microorganisms. In addition, microorganisms and biomass can be used for the synthesis of the constituent monomers of PET from renewable sources. The combination of both biodegradation and biosynthesis would enable a completely circular bio-PET economy beyond the conventional recycling processes. Circular strategies like this could contribute to significantly decrease the environmental impact of our dependence on this polymer. Here we review the efforts made towards turning PET into a viable feedstock for microbial transformations. We highlight current bottlenecks in the degradation of the polymer and the metabolism of the monomers and we showcase fully biological or semisynthetic processes leading to the synthesis of PET from sustainable substrates.

Kei-apple (Dovyalis caffra L) is an indigenous fruit tree of southern Africa. It is currently found in the dry, wooded grassland and forest edges of the arid and semi-arid regions of the world. Existing literature have mainly focused on the medicinal and nutritional as well as phytochemical characterization of Kei-apple. Thus, this review highlights beneficial economic prospects of Dovyalis caffra and its contribution to the economic prosperity. It is a drought tolerant plant with diverse uses such as income from the sale of the fruit, cultivated as a fence or to form an impenetrable hedge while the leaves are used for nutrient leaching prevention, fodder and compost making. The trunk of Dovyalis caffra serves as a good source of hard wood for fuel, house building and furniture making. It is also a good apicultural fruit tree and an excellent habitat and fertilizer derivation agent for farming activities. Considering the multidimensional effect of poverty and the food insecurity on many rural communities globally, there is a need to explore the potentials by encouraging the cultivation of Dovyalis caffra to assist with reducing unemployment, food insecurity and income-poverty problems in the arid and semi-arid areas of the world.

The world is facing several global issues such as food and energy crisis, climate change and greenhouse gases emissions. To subdue these issues, many entities from academia and industries have innovated alternate techniques of performing regular activities which cause such problems. One of these innovations is the introduction of vertical and zero acreage farming in the field of sustainability. These carry the potential to solve one of the most important affairs of food security in most countries of the world. But, this technology has been in its nascent stage for many years. This paper uses a comprehensive framework proving the feasibility of initiating vertical farming on university campuses to feed the staff and students, which could also set an example to the rest of the world into using this technique on a wider scale. The study chose Huazhong University of science and technology (HUST) in Wuhan city, China for accessing the return on investment and food sufficiency if vertical farming is implemented. Using Central Limit Theorem, a statistical model was developed, and various scenarios were analyzed. The results indicated that if a separate vertical farm is constructed, the breakeven can be achieved in a range of 10-20 depending on parameters such as type of operation, number of floors and amount of vegetation. The study has shown that the use of vertical farming cannot only bring in revenue for the campus but also aid in mitigating climate change.

The unsustainability of the services related to water, sanitation and hygiene in informal settlements in Sub-Saharan Africa services is deeply embedded in current societal and governance structures, cultures and practices; it is context-dependent and involves numerous actors with different interests. The field of sustainability transitions research addresses such persistent and large scale societal challenges, with transition management being one of its widely applied governance approach. By drawing on an analysis of the root causes of unsustainability and unreliability of WASH services in three case studies in Sub-Saharan Africa (Arusha-Tanzania, Dodowa-Ghana, Kampala-Uganda), we explore how a transition management approach can be designed to support a transition towards sustainable Water, Sanitation and Hygiene (WASH) in Sub-Saharan Africa. We distinguish the following contextual dimensions related to the unsustainability of WASH services: a) Multiplicity of WASH practices, structures and arrangements, b) Governance capacities for WASH services and maintenance, c) Landownership for sustainable access to WASH, d) Public participation in decision-making related to WASH, e) socio-economic structures governing access to WASH. These dimensions prompt the identification of conceptual and application challenges for transition management. Based on these challenges, recommendations were formulated for the design of a prescriptive transition management process that is not only functional but also emancipatory of character.

As human activities of the countries in the East Asia have been remarkably expanding over recent decades, various problems in relation to ships, such as oil spill and many other coastal marine pollution, are continuously occurring in the coastal region. In order to conserve marine resources and prepare for possible ship accidents in advance, the need for efficient ship management is increasing over time. Multi-satellite, multi-sensor, multi-wavelength or multi-frequency observations make it possible to monitor a variety of vessels in the coastal region. This study presents the results of ship detection methodology applied to multi-spectral satellite images in the seas around Korean Peninsula based on optical, hyperspectral, and microwave remote sensing. To detect ships from hyperspectral images with a few hundreds of spectral channels, spectral matching algorithms are used to investigate similarity between the spectra and in-situ measurements. In the case of SAR (Synthetic Aperture Radar) images, the Constant False Alarm Rate (CFAR) algorithm is used to discriminate the vessels from backscattering coefficients of Sentinel-1 SAR and ALOS-2 PALSAR2 images. The present ship detection methods can be extensively utilized for optical, hyperspectral, and SAR images for comprehensive coastal management purposes toward perpetual sustainability in the future.

The system design for Sustainable manufacturing is to consider both ecological and financial constraints. Manufacturing industry demands to advance in sustainable manufacturing by accounting in environment factors in it. All the factors that affect the environment need to be analyzed so that proper amendments or suggestions can be provided. To favour this, Computer aided life cycle inventory model has been presented for CNC milling and turning processes. Based on utilization of resources and stages, whole machining operation time can be divided into three phases named as process (milling or turning), idle and basic times. As parameters are different for evaluating the process times i.e. depth and width of cut in case of milling and initial and final diameters for turning, two different case studies has been presented one for each milling and turning process. Effect of material choice has been studied for different processes. Highly dense and hard materials takes more time in finishing the job due to low cutting speed and feed rates as compared to that of sot materials. In addition, face milling takes more time and consumes more power as compared to peripheral milling due to more retraction time caused by over travel distance and lower vertical transverse speeds than the horizontal transverse speed used in peripheral retraction process.

In the last decade, probably in response to global changes and environmental crisis, the use of the term “social-ecological system” (SES) in the scientific literature has been growing. This is certainly a sign of the recognition of the need and importance of transdisciplinary research. Here, we explore whether the use of the term is a buzzword, or it actually represents a key concept toward the integration of social and ecological research. We compiled a data base of publications (N = 1289) that mentioned SES in title, keywords and abstract. Subsequently, we analyzed: authors affiliations, type of work (conceptual, empirical, review), study site, prevailing human use, temporal and spatial scales of analysis, kind of variables analyzed (socioeconomic, biophysical), and the method/s used to integrate them. We detected four time spans in the use of the term (1975–1997, 1998–2006, 2007–2012, 2013–2016). Our results suggest that SES is a widely invoked concept to study the interface between social and ecological systems. Most works show some common elements such as the analysis of resilience, ecosystem services, sustainability, governance and adaptive management. However, the majority of studies does not study SES as a whole, integrating both social and ecological variables and their feedback loops. We consider that SES is still a concept in construction in order to build a necessary framework to integrate social and ecological sciences. For a robust evolution we recommend to focus on 1. a conscious, discussed and agreed effort of scientists to conduct transdisciplinary research needed to study SES; 2. developing methodological tools for the true integration of social and ecological data.

Data mining plays a critical role in the sustainable decision making. The k-prototypes algorithm is one of the best-known algorithm for clustering both numeric and categorical data. Despite this, however, clustering a large number of spatial object with mixed numeric and categorical attributes is still inefficient due to its high time complexity. In this paper, we propose an efficient grid-based k-prototypes algorithms, GK-prototypes, which achieves high performance for clustering spatial objects. The first proposed algorithm utilizes both maximum and minimum distance between cluster centers and a cell, which can remove unnecessary distance calculation. The second proposed algorithm as extensions of the first proposed algorithm utilizes spatial dependence that spatial data tend to be more similar as objects are closer. Each cell has a bitmap index which stores categorical values of all objects in the same cell for each attribute. This bitmap index can improve the performance in case that a categorical data is skewed. Our evaluation experiments showed that proposed algorithms can achieve better performance than the existing pruning technique in the k-prototypes algorithm.

This paper formulates a new strategy for participatory forest management consisting of encouraging public participation as long as it increases empathy among participants. The strategy requires the homogeneous representation of the opinion of a participant (i.e. to determine how they assess a forest plan and identify the best one). Utility assessments are prepared for participants through pair-comparisons between meaningful points in the territory and from value functions based on forest indicators. The best plan is designed by applying combinatorial optimization algorithms to the utility of a participant. The calculating of empathy -of one participant relative to another - is based on the equivalence of their respective utilities when the current forest plan is modified. This involves calculating the opinions that are due to systematic changes in the collective plan for those participants that each participant supposes will affect the utility of the other participants. Calculating empathy also requires knowing the interactions among participants, which have been incorporated through agent-based simulation models. Application of the above methodology has confirmed the association between increases in empathy and convergence of opinions in different scenarios: well and medium-informed participants and with and without interaction among them, which verifies the proposed strategy. In addition, this strategy is easily integrated into available information systems and its outcomes show advantages over current participatory applications.

This research work is concerned in the exergy analysis of the continuous-convection drying of onion. The influence of temperature and air flow rate was studied in terms of exergy parameters. The energy and exergy balances were carried out taking into account the onion drying chamber. Its behaviour was analysed based on exergy efficiency, exergy loss rate, exergetic improvement potential rate and sustainability index. The exergy loss rates increase with the temperature and air flow rate augmentation. Exergy loss rate is augmented at higher drying air temperatures and flow rates because the overall heat transfer coefficient increase. On the other hand, the exergy efficiency increases with the air flow rate augmentation. This behavior is due to the energy utilization was improved because the most amount of supplied energy was utilized for the moisture evaporation. However, the exergy efficiency decreases with the temperature augmentation due to the free moisture is less, then, the moisture begins diffusing from the internal structure to the surface. The exergetic improvement potential rate values show that the onion drying process presents a high potential to improve the exergy efficiency. The sustainability index of the drying chamber varied from 1.9 to 5.1. To reduce the environmental impact of the process, the parameters must be modified in order to ameliorate the exergy efficiency of the process.

As the largest energy consumer and carbon emitter, China has made substantial efforts to improve energy efficiency for decrease energy consumption, while the energy rebound effect determines its effectiveness. The embodied energy consumption of construction projects accounted for nearly one-sixth of the total economy's energy consumption in China. This paper is based on the logical relationship among capital input, technological progress, economic growth, and energy consumption, adapting an alternative estimation model to estimate the energy rebound effect for the construction industry in China for the first time. Empirical results in our paper reveal that the energy rebound effect for the construction industry in China is about 59.5% for the period of 1990–2014. The results indicate that the energy rebound effect does exist in China’s construction industry and it presented a fluctuating declining trend. This implies that half of the energy savings by technological progress is achieved. In addition, China’s government should implement proper energy pricing reforms and energy taxes to promote the sustainable development of China’s construction industry.

Addressing the urgent sustainability challenges in the wine industry, this study explores the efficacy of sustainability-oriented innovations (SOIs) and smart farming technologies (SFTs) across wine value chains in Cyprus and Italy. Employing KPIs for a rigorous assessment, the research delves into the environmental, economic, and social impacts of these technologies. In Cyprus (SIP7), the integration of digital labelling and smart farming solutions led to a substantial reduction in pesticide usage by up to 75% and enhanced the perceived quality of wine by an average of 8%. Italy's SIP10 witnessed a 33.4% decrease in greenhouse gas emissions, with an additional benefit of a 5.3% improvement in intrinsic product quality. Notably, SIP10 also introduced a carbon credit system, potentially generating an average annual revenue of €4,140 per farm. These findings highlight the transformative potential of SOIs and SFTs in promoting sustainable practices within the wine industry, demonstrating significant advancements in reducing environmental impact, improving product quality, and enhancing economic viability. The study underscores the critical role of innovative technologies in achieving sustainability goals and provides a compelling case for wider adoption within the agricultural sector.

Healthcare crises occur occasionally are very disruptive and resource consuming. The Covid-19 pandemic provided an example of inefficient wasteful resource management that would be unsustainable in the long term. This paper presents a framework for sustainable crisis management that will be applicable for future crises. The methodology is also applicable to other pandemics, wars, multi-casualty natural disasters, industrial disasters, etc. Attention focuses on rapid crisis resolution such as lockdowns. Despite unprecedented investments in healthcare, lack of capacity and timeliness are still problems affecting every country, even the wealthier ones. During the Covid19 pandemic, some healthcare systems around the world have collapsed. For example, Brazil, Spain, Italy, and more. This is due to the lack of a clear methodology for handling such crises. This paper presents a resource-based methodology to cope with healthcare crises considering three scenarios: “Peace”, “War” and “Tsunami”. The paper outlines a methodology for identifying the system bottlenecks for coping with the crisis in each scenario by using established simple tools. These tools assure significant resource frugality that will enhance sustainability. The paper also analyses where the system constraint should be and prescribes how to prepare for such scenarios. A large medical center case study demonstrates our approach. During “peace” times, evolutionary strategies should be used exclusively. During “war” times, a hybrid – evolutionary/disruptive (revolutionary) strategy. During the “Tsunami” scenario, one should rely only on the disruptive (revolutionary) strategy. This methodology can be extended to other scenarios and other lines of research.

Keywords: environmental impacts of hotels; environmental management in lodging facilities; corporate sustainability.

The paper analyses the unused urban spaces in concert with the creative city idea. The research issues are developed as follows. 1. The unused urban places express the city's unsustainability since every urban space has the potential to become such a dead zone. 2. The concept of the creative city covers different creative activities in concert with sustainable development. 3. The unusable urban places result from a modernistic approach that neglects the cultural context, of the city's division into functional zones ignoring integral living intentions and industrial exploitation in the previous city's rims. 4. The Vilnius Sport Palace is an unused space not so much due to the lack of interest, but due to a knot of interests, which politicians cannot cut. The research raises the question of whether the problem of the VSP can be solved by using the idea of the creative city. In terms of the theoretical approach, a comparative analysis is used. Besides literature analyses, the case study is applied. Additionally, the semiotic approach is used. For this purpose, two of Greimas' traditional semiotic squares in combination with Ricoeur's idea of the interpretation's conflict are applied.

Switzerland, a wealthy country, has a cutting-edge healthcare system, yet per capita, it emits over one ton of CO2, ranking among the world's most polluting healthcare systems. To estimate the carbon footprint of the healthcare system of Geneva’s canton, we collected raw data on the activities of its stakeholders. Our analysis shows that when excluding medicines and medical devices hospitals are the main greenhouse gas emitter by far, accounting for 48% of the healthcare system’s emission, followed by nursing homes (20%), private practice (18%), analysis laboratories (7%), dispensing pharmacies (4%), the homecare institution (3%) and the ambulance services (

The aim of this work was to classify the business incubators in Spain according to the four phases of startups incubation. Taking into account that the graduation rate implies greater survival and business success of the incubated companies, they have been identified at each stage of the incubation (spread of entrepreneurship, pre-incubation, advanced incubation, and graduation). The activities that present higher impacts on the success of the incubated companies and the activities carried out by the incubator that have a greater relevance on the graduation of the companies have concretely been considered. Principal component (PC) cluster analysis have been applied. All the incubation variables were used simultaneously, reducing their number, and grouping them into factors, finally the cases were grouped according to these latent variables. Principal components analysis reduced dimensionality to 8 factors with a 74 % of explained variance. Factor 1 was positively related to pre-incubation variables, factor 2 was linked to training and collaboration variables within the entrepreneurship diffusion phase. Factor 3 called activity monitoring and control and was related to phase 3 or basic incubation variables. Clusters analysis facilitates the grouping of incubators into three clusters: Group 1 (16 % of the total), incubators with strong deficits in incubation phases 1, 2 and 3. They are small Business Incubators, often located in rural areas or cities and low graduation rate. Group 2 (30 %), business incubators with very high graduation rate, and strongly positive values in factor 1 and 2. Factor 3 although positive is susceptible to improvement. They are the largest incubators and usually located in industrial and technological parks. Group 3 (54 %) is the majority, with values close to cluster 2 and 3.

Many corporations have now revised their value statements to showcase their commitment to sustainable development and green business due to the pressing issues of climate and environmental damage. Despite the importance of value statements that can direct companies to achieve sustainable goals, what kind of values can be perceived as organizational orientations to sustainability remains unknown. This study explores how the general public views the inclusion of sustainable components in value statements from the listed companies in Hong Kong by using Q-sort methodology (n = 30). Analyzing the final sample of 40 value statements extracted from 27 listed companies, we identified three factors related to sustainability, namely, Empowering business process management, Empowering customer-centric excellence, and Empowering sustainable progress. This study provides an additional component to the traditional triple bottom line by suggesting that internal operation of a company is an emerging idea to understand corporate sustainability.

This research aims to review the educational and research operations of Mahasarakham University and propose development directions for the university to meet sustainable development criteria for ranking as a green university. This involves gathering data and analyzing the results of operations over the past 3 years, then using this analysis to synthesize lessons learned and develop guidelines for sustainable development in the coming years. The study found that the university's policies and strategies implemented following the annual performance evaluation criteria align with the green university assessment criteria for education and research. This has resulted in minor improvements in curriculum for sustainability. However, community service projects for sustainability have increased by 89.10%, while funding for sustainable research and academic publications related to sustainability has decreased. In summary, the projects under the university's development strategy adequately support and drive suitable development activities. Nevertheless, the university must continuously review its operations to adapt to changing contexts, budget constraints, and evolving competition and develop each year sustainably.

Gelatin industry residues are increasingly used as fertilizer and soil conditioner. However, correct residue dosage is critical for grass development and minimizing environmental impacts. This randomized block design study determined adequate dosage of Mixed Gelatin Sludge (MGS) for Marandu grass production in wet/dry seasons in Brazil. Five MGS levels (0%–200% of required nitrogen) were compared to mineral fertilizer. Agronomic/productivity characteristics, bromatological composition, macro/micro-nutrient composition of leaves, and soil chemical attributes were evaluated. Agronomic/productivity characteristics were influenced by MGS dose in both dry/rainy seasons, except for leaf blade pseudostem ratio and percentage of leaves/pseudostem. Bromatological composition was influenced by MGS doses in dry/rainy seasons except for dry/mineral material quantities. Marandu leaf tissue chemical composition was significantly influenced by MGS dose, except for potassium, boron, and iron. Chemical composition of four soil layers between 0–50 cm influenced GMS dose, except for pH, organic matter, magnesium, copper, manganese, and zinc. GMS dose for Marandu production should be 200% of nitrogen (N) requirement. GMS application increased productivity/quality of Marandu grass. Macronutrients (N, phosphorus) and micronutrients (Ca, Mg, S, Cu, and Zn) increased in Marandu grass and in the soil (Ca, S, and Na). Increased sodium (Na) level was not limiting.

The European Green Deal is the policy established by the EU against global environmental problems. However, it is closely concerned with the countries carrying import and export activities with the EU. Because it is planned to impose an obligation to declare greenhouse gas emission inventories of products imported into the EU, the EU will soon begin to assess the CBAM on imports from carbon-intensive industries. This regulation is expected to affect Turkey-EU trade relations. One of the industries that Turkey has export relations with the EU is the building materials industry. For this reason, it will have had necessary to provide sustainability criteria for the export of building materials. However, there is no database in Turkey where the inventory data of building materials is declared. In Turkey, within the scope of EU Green Deal action plans, it is aimed to create different structures for environmental information of building materials in the medium and long term. In light of such information, within the scope of this study it is aimed to create reference information for building material databases to be developed in Turkey. The study recommends weight and normalization reference values following the life cycle assessment methodology defined by ISO 14040 and ISO 14044 international standards. Twelve environmental impact categories accepted in the literature, including greenhouse gas emissions, have been considered as the environmental impacts of building materials. Semi-structured interviews were held with twenty-one industry stakeholders in Tur-key to determine the weight reference values. The results obtained from the semi-structured interviews were combined using the AHP method. An extensive research study was conducted on Turkey’s national inventory data to determine normalization reference values. Environmental impact calculations were carried out for different building materials in a case study to present the importance of regional adaptation of the determined reference values. The recommended reference information may be used in greenhouse gas emission declarations under the EU Green Deal and other potential environmental impact declarations from building materials.

Endophytic fungi (EF) have emerged as promising modulators of plant growth and stress tolerance in agricultural ecosystems. This review synthesizes current knowledge on the role of EF in en-hancing crop adaptation to abiotic stress. Abiotic stresses, such as drought, salinity, and extreme temperatures, pose significant challenges to crop productivity worldwide. EF have shown re-markable potential in alleviating the adverse effects of these stresses. Through various mechanisms including synthesis of osmolytes, production of stress-related enzymes, and induction of plant de-fense mechanisms, EF enhance plant resilience to abiotic stressors. Moreover, EF promote nutrient uptake and modulate hormonal balance in plants, further enhancing stress tolerance. Recent ad-vancements in molecular techniques have facilitated the identification and characterization of stress-tolerant endophytic fungal strains, paving the way for their utilization in agricultural prac-tices. Furthermore, the symbiotic relationship between EF and plants offers ecological benefits, such as improved soil health and reduced dependence on chemical inputs. However, challenges remain in understanding the complex interactions between EF and host plants, as well as in scaling up their application in diverse agricultural systems. Future research should focus on elucidating the mechanisms underlying endophytic fungal-mediated stress tolerance and developing sustainable strategies for harnessing their potential in crop production.

Green carbon-based materials (GCM), i.e. carbon materials produced using renewable biomass or recycled wastes, ought to be used in order to processes become sustainable and carbon neutral. Carbon nanomaterials, like for example carbon dots and nanobichar families, and carbon materials, like for example activated carbon and biochar substances, are sustainable materials with great potential to be used in different technology applications. In this review, the following four applications were selected, and the works published in the last two years (since 2022) critically reviewed: agriculture; water treatment; energy management; and, carbon dioxide reduction and sequestration. GCM improved the performance of the technological applications under revision and play an important role in the sustainability of the processes, contributing to the mitigation of the climate change, namely by reducing emission and increase sequestration of CO2eq..

In our increasingly urbanized world, precise and up-to-date maps of human settlements are essential for sustainable urban development policies. The availability of open-access Sentinel-2 data from the Copernicus program presents an opportunity to create a comprehensive global map of human settlements, offering a detailed view of built areas on a large scale. This study estimates large-scale built-up fractions using encoder-decoder deep learning architectures like U-net, Res-U-net, and Attention-U-net in the large and complex urban area of Delhi, India. Openly available datasets like Open Street Map (OSM) and Microsoft building footprint datasets are used to derive built-up fractions at 10×10m resolution cells for over 34,000 km2. Our results show that Attention-U-net with the Huber loss function performs the best in different built-up densities (i.e., urban, semi-urban or rural) with an R2 score of 0.631, while Res-U-net and U-net obtained an R2 score of 0.623 and 0.612, respectively. The investigated networks significantly improve the accuracy over the latest Global Human Settlement Layer product (GHSL-S2), which uses a deep-CNN and reaches an R2 of 0.387 in our case study area. The result of this study yields a valuable spatial layer for examining the spatial distribution of human settlements across the entire spectrum from rural to urban areas.

The growth of the wind power sector has been marked by environmental, economic, and political drivers. Its starring role is also visible in the emergence of the so-called “green jobs”. Notwithstanding, its evolution ought not to compromise issues related to occupational risks. This exploratory study examines psychosocial risks in the operation and maintenance of onshore wind turbines in a leading Portuguese company. We conducted interviews with main stakeholders (Human Resources, OHS professionals, and team leaders); developed an “activity diary” for the operation and maintenance technicians to describe their activity and perceived impacts on health, complemented with collective interviews; and applied the Work and Health Survey. The results revealed particular risks and health impacts: working under adverse weather conditions; working at heights and in confined spaces; spending long work hours inside of the nacelles to achieve an optimum balance between favorable wind slots to intervene and avoiding additional trips up and down the wind turbines without lifts (70m-120m); and the feeling of early ageing. At a time when these workers are striving for recognition of their profession as a “rapid wear profession”, it is a key moment to discuss these results to guarantee sustainable conditions for future generations of workers.

Clothing consumers mostly purchase, use, and dispose of clothing products in a linear business model. This approach pollutes the environment and causes economic and social crises in the ecosystems. This study evaluates the amount of generated postconsumer clothing waste (PCCW) and proposes recycling as a sustainable waste management approach. Data were collected to understand disposal behavior of consumers with 474 respondents selected from households in Bahir Dar city. The findings show that all the determinant factors on the PCCW generation level except religion were significant. The most frequently disposed type of clothing waste is jeans-trouser (51%). The CEBM was used to develop alternative products from a jeans-based clothing waste. The jean's fiber and fabric-reinforced composite materials were developed using unsaturated polyester resin as a sustainable way of PCCW management strategy. The shredded form fiber-reinforced composite was found to have a smoother surface than that of the chopped or cut fabric-reinforced composite. The product was characterized by physical and mechanical properties. The study can be further extended to the scope of the entire consumers in Ethiopia and alternative recyclable products can be studied.

Nowadays, digitalization present in all links of the product life cycle and within product design, packaging is a critical element, as it affects the customer’s purchase intention, and therefore, it is one of the most important spaces where to include techniques and methods based on Industry 4.0 that obtain results from the user and bring them closer to the process. The relationship between packaging and the expected quality and emotions of users is a topic that is addressed in the social axis of sustainability and involves an effort to strengthen the relationship with the user. This article studies the expected quality of nougat packaging in terms of shape and colour using ANOVA analysis. For this purpose, a survey was carried out among 122 participants in Spain and Mexico. The main conclusion is that a packaging with the combination of three shapes (rectangle, square and triangle) and colours (yellow, orange and red) enhances consumers’ emotions of admiration, satisfaction, pleasant surprise, attraction, fascination and joy.

The energy crisis is currently a major topic in scientific and managerial discussions in the building and construction industry. While employing low-cost strategies for reducing energy usage is beneficial for principals and decision-makers, the primary purpose of this study is to recommend the use of phase change materials (PCM) to improve cooling and heating load management in buildings. In order to accomplish this, the study applies design-builder simulations to a developing country case study. The results indicate that integrating PCM in buildings can reduce energy usage by around 6 percent. Although this value may be lower than other techniques, it is nevertheless important for reaching green building goals in both developed and developing nations. The case study, which takes place in a four-season region, demonstrates the significant potential of the PCM system for both cooling and heating energy management. In addition, the reciprocal performance improvement of PCMs is a remarkable characteristic, especially when contrasted to some conventional systems that focus on a single energy management objective in buildings. Lastly, it should be underlined that the suggested platform is consistent with Sustainable Development Goal 7 (Affordable and Clean Energy Targets).

In this study, tree selection/plantation DSS (Decision Support Systems) were reviewed and assessed based on essential objectives in the available literature. We reviewed existing DSS using multiple data sources and available online resources such as web interfaces. We compared the existing DSS, focusing primarily on five primary objectives in this study, which DSS may address when it comes to the tree selection, including a) Climate resilience, b) Infrastructure/Space Optimization, c) Agroforestry, d) Ecosystem services, e) Urban sustainability. Climate resilience of tree species and urban sustainability is addressed relatively less in existing systems, which can be holistically internalized in future DSS tools Based on this review, DNN (Deep Neural Networks) is recommended to address achieving trade-offs between complex objectives such as maximizing ecosystem services, climate resilience of tree species, maintaining Agroforestry, and other benefits.

The transport sector is pivotal and indispensable in our daily existence, being the exclusive conduit for the intercontinental conveyance of commodities and individuals. Hence, comprehending the phenomenon of business failure within the transport industry assumes paramount significance in delineating an effective competitive policy for this sector. The primary objective of this research paper is to execute a comparative investigation between statistical models forecasting business failure and models founded on artificial intelligence, within the context of the transport sector. This analysis spans the temporal expanse from 2014 to 2021 and encompasses the nations of Portugal, Spain, France, and Italy, aiming to ascertain superior efficacy among these models. The dataset employed for this endeavor encompassed a final cohort of 4866 companies, comprising 2881 that endured as going concerns and 1985 that succumbed to business failure. The models developed for this study exhibited the capacity to accurately categorize a proportion of companies ranging from 71% to 73%. Nonetheless, upon comparative scrutiny of these outcomes with those derived from the statistical models dedicated to business failure prediction, it becomes evident that the latter demonstrate an enhanced predictive prowess, manifesting fewer errors in the classification of the scrutinized companies.

Aiming to investigate the impact of strategic knowledge disclosure on the continuous realization of digital innovation in enterprises, this study examines data from 168 listed companies across three high-tech industries in China from 2012 to 2021. By examining investor trust, consumer trust, worker trust, and rival trust as mediating variables within the market trust dimension, this research explores the impact mechanism of strategic knowledge disclosure on the sustainability of input and output in digital innovation. The findings reveal that strategic knowledge disclosure significantly promotes both input and output sustainability in digital innovation. Specifically, investor trust positively mediates the relationship between strategic knowledge disclosure and the sustainability of digital innovation input. Similarly, consumer trust and worker trust positively mediate the association between strategic knowledge disclosure and both input and output sustainability in digital innovation. However, it is important to note that rival trust negatively mediates the link between strategic knowledge disclosure and both input and output sustainability in digital innovation. The research findings possess significant theoretical value and provide valuable guidance for promoting the sustainable development of digital innovation in enterprises.

Chitin/chitosan and collagen are two of the most important bioactive compounds with applications in the pharmaceutical, veterinary, nutraceutical, cosmetic, biomaterials, and other industries. When extracted from fish and shellfish non-edible parts, by-catches, and invasive species, their use contributes to a more sustainable and circular economy. The present article reviews the scientific knowledge and publication trends along the marine chitin/chitosan and collagen value-chains and assesses how researchers, industry players, and end-users can bridge the gap between scientific understanding and industrial applications. Overall, research on chitin/chitosan remains focused on the compound itself rather than its market applications. Still, chitin/chitosan use is expected to increase in food and biomedical applications, while that of collagen is expected to increase in biomedical, cosmetic, pharmaceutical, and nutritional applications. Sustainable practices, such as the reuse of waste materials, contribute to strengthen both value-chains; the identified weaknesses include the lack of studies considering market trends, social sustainability, and profitability, as well as insufficient examination of intellectual property rights. Government regulations, market demand, consumer preferences, technological advancements, environmental challenges, and legal frameworks play significant roles in shaping both value-chains. Addressing these factors is crucial for seizing opportunities, fostering sustainability, complying with regulations, and maintaining competitiveness in these constantly evolving value-chains.

The Covid-19 pandemic strained global supply chains, and companies faced numerous produc-tion, logistics, or material management problems. It is claimed that the digitalization of supply chains can have the potential to make supply chains more resilient to interruptions and disrup-tions. This article focuses on describing the experiences of three large Austrian family-owned business during the supply chain disruptions caused by the pandemic and the Ukraine war. This assessment is done from the perspective of the supply chain leaders in the organization. We provide insights on what worked and what did not for these firms and what we can take away from their experiences.

Urban waterways are significant natural elements in urban development activities, which might cause long-term changes in the historic built environment. As it runs through the historic city center of Bursa, a World Heritage Site in Türkiye, Cilimboz (Phillippoz) Creek has witnessed urban development activities along its surrounding landscape. Its valley, the study area, is composed of natural, residential, and industrial heritage as well as archaeological remains dating to ancient times while having undergone permanent changes as a result of the rapid increase in population and squatting, since the 1960s. This study aims to assess the challenges of sustainability in a multi-layered historic urban landscape while discussing the outcomes of various land use implementations along Cilimboz Creek. The cultural assets in the study area are presented by using a combination of interpretive-historical and case-study research methods to understand historic urban texture. Afterward, the changes in the composition of natural and architectural heritage are described to assess the impacts of urban development activities on the sustainability of its multi-layered historic urban identity. Consequently, this evaluation reveals the need for a holistic approach by the participation of all relevant stakeholders to co-develop solutions for architectural, social, and environmental conservation issues in this cultural landscape.

Solar photovoltaic (PV) technology is a cornerstone of the global effort to transition towards cleaner and more sustainable energy systems. This paper explores the pivotal role of PV technology in re-ducing greenhouse gas emissions and combatting the pressing issue of climate change. At the heart of its efficacy lies the efficiency of PV materials, which dictates the extent to which sunlight is transformed into electricity. Over the last decade, substantial advancements in PV efficiency have propelled the widespread adoption of solar PV technology on a global scale. The efficiency of PV materials is a critical factor, determining how effectively sunlight is transformed into electricity. Enhanced efficiency, achieved through a decade of progress, has driven the global expansion of solar PV. Multi-junction photovoltaic materials have now exceeded 40% efficiency in lab tests. China leads the world in solar PV installations, boasting over 253 GW of installed capacity by the end of 2021. Other prominent countries in this sector are the United States, Japan, Germany, and India. Supportive policies like feed-in tariffs, net metering, tax incentives, and cost reductions in PV modules have made solar PV increasingly competitive against fossil fuel-based power generation. Solar PV technology holds immense potential for creating a cleaner, reliable, scalable, and cost-effective electricity system. To expedite its deployment and foster a more sustainable energy future, continued investment in research and development, along with supportive policies and market mechanisms, is essential. This paper underscores the pivotal role of solar PV technology in the global energy transition and advocates for a concerted effort to unlock its full potential in achieving a more sustainable and resilient energy future.

This study investigated the impact of sustainability reporting on financial performance, with a focus on companies in the Turkish food, beverage and tobacco and textile, wearing apparel and leather sectors. The sustainability reports of 48 companies listed on the Istanbul Stock Exchange for 2022 were studied, and the quality of sustainability practices was determined by using a general index (Sustainability Reporting Disclosure Quality Index (SRDQI)) and three partial indices (Environmental Disclosure Quality Index, Social Disclosure Quality Index, and Corporate Governance Disclosure Quality Index (CGDQI)). To analyze the relationships between financial performance and sustainability practices two types of regression models were developed, based on which eight models were directly examined. The results indicate the complete absence of a statistically significant impact of SRDQI on all financial performance measures used. Among the partial indices, only CGDQI has a significant positive effect on the Assets Turnover Ratio. An analysis of the influence of control variables shows a multidirectional dependence of individual financial performance measures on the size of companies, their age, industry affiliation, as well as on the structure of capital used. Finally, this study provides directions for improving the institutional environment of sustainability reporting for Turkish companies.

Agriculture (crop production, land use, and livestock) is the second most important greenhouse gas (GHG) emitting sector after the energy sector. Agriculture is also recognized as the source and sink of GHGs. Evidence demonstrates that the application of high amounts of nitrogen-rich fertilizers enhances methane (CH4) and nitrous oxide (N2O) emissions, which are potent GHGs with a high global warming potential (GWP). Considering its global contribution to the climate crisis, reducing GHG emissions in agriculture would considerably lower its share of the global GHG emission records, which may lead to enormous benefits for the environment and food production systems. Several diverging and controversial views questioning the actual role of plants in the current global GHG budget continue to nourish the debate globally. We must acknowledge that considering the beneficial roles of major GHGs to plants at a certain level of accumulation, implementing GHG mitigation measures from agriculture is indeed a complex task. This review seeks to provide key approaches for GHG mitigation in the literature (environmentally friendly crop cultivation and residue management practices, improvement of plants nutrients/fertilizer use efficiency, exploring the genetic diversity for low GHG emission, soil methane-producing bacteria, integrated soil fertility management, improved livestock feeding efficiency, and production, etc.). This work gathers key approaches from 275 peer-reviewed publications, including experimental research papers, review articles, and books, discussing greenhouse gas emissions mechanisms and mitigation to unravel effective strategies for GHG mitigation, proven to be effective or carry the potential to mitigate GHG generation from agriculture. This review also discusses in depth the significance and the dynamics of strategies regarded as game changers with a high potential to enhance, in a sustainable manner, the resilience of agricultural systems. Agricultural GHG mitigation approaches discussed in this work can serve as game changers in global efforts to reducing GHG emissions and alleviating the impact of climate change through sustainable agriculture and informed-decision making.

The Sustainable Development Goals (SDGs) require collaboration among academia, indus-try, citizens, public administration and politics. Analysis and monitoring of the SDGs is a deci-sive step in evaluating possible corrective actions. In this regard, this paper assesses the perfor-mance of Italian regions in 2021 compared to the values recorded in 2020. An online survey among academics aims to support Multi-criteria decision analysis (MCDA) choices, which aims to calculate a sustainability score for Italian regions. The results, based on 27 targets, show that the northern regions show better performance, with the province of Trento topping the list. This is followed by Valle d'Aosta and the province of Bolzano, confirming the trio that emerged in the previous year. A very interesting fact is the growth of the central regions, which overall tend to reach a value close to that of the northern regions. In particular, Toscana, Marche and Lazio stand out for a good performance. It is also confirmed that the southern regions occupy the last places in the ranking with the only excep-tion being Abruzzo. The implications of this paper move toward a pragmatic approach that goes beyond the ideological in order to arrive at solutions and projects that are viewed with sharing by stake-holders. There is a need to foster collaboration between different territorial realities in order to achieve a social community in which young people have a role in which they can grow and share their ideas. Made in Italy is a target on which to enhance the SDGs to help make the Medi-terranean area a crossroads of the future global economy.

For a number of years heritage resources have suffered the negative effects of tourist pressure. Overtourism has been generating a wide-ranging debate on this issue. This work focuses on the strategies and measures adopted to address overtourism during the last 30 years in heritage attractions, which are much less studied than urban heritage centres. Specifically, it analyses measures relating to the management of site capacities, based on the concept of tourist carrying capacity, using the content analysis as a methodology. We have used the Alhambra in Granada as a case study, as one of the most visited Spanish World Heritage Sites. The results obtained reflect a strong consensus on the need to introduce measures to restrict tourist activity, although these measures imply a great effort in terms of management and tend to be taken advantage of by some stakeholders for their own benefit. The extensive time frame of the measures adopted allows us to reflect on the possibilities and limitations of dealing with overtourism by using capacity management strategies, and to extract useful conclusions for other heritage sites with similar problems.

The perceived poor performance of publicly traded companies on their sustainability commitments and the quality of sustainability reporting has prompted stakeholders to consider the economic, environmental, and social impacts of corporate activities. Economic activities have led to various threats in the form of climate change, pollution, greenhouse gas emissions, natural disasters, and other issues that have negatively impacted the environment and stakeholders. Companies are expected to report to stakeholders on their sustainability performance, but reality proves that present reporting falls below stakeholders’ expectations mainly due to its still voluntary nature. The present study aims to provide a literature review of the relationship between sustainability reporting and the role of companies governance, especially observing if climate change requirements and energy-needed changes are being accounted. Results highlight mixed evidence for the influence of board governance attributes, providing interesting insights for research advancement. The study has practical implications for businesses, regulators, governments, and other stakeholders in their policy deliberations and investment decisions. Further empirical studies are recommended to re-examine sustainability reporting using the variables identified as important factors and gaps in this study and other board characteristics to improve the generalizability of the results.

Despite a growing concern over sustainability in tourism, research on this domain regarding, specifically, lake destinations, is still scarce. Although perceptions on lake destinations have been studied, no study is known that analyses the impact of visitors’ perceptions on satisfaction and behavioral intentions. Thus, this paper aims to develop and test a model to analyse the effect of lake visitors’ perceptions of destination’s sustainability on both satisfaction and loyalty towards lake destinations. A questionnaire survey was conducted in the Shchuchinsk-Burabay resort area, an important lake destination in northern Kazakhstan. The results support the proposed lake destination loyalty model, tested using partial least squares structural equation modelling (PLS-SEM). Sustainability proved to be decisively influential, with water quality being the dimension with the highest impact on satisfaction with the lakes, along with a positive key impact of the absence of congestion. In addition, both water quality and lack of congestion had a significant indirect impact on satisfaction with the lake destination, and on loyalty. Based on the research findings, theoretical conclusions and practical implications are drawn.

As the demand for aromatic and medicinal herbs increases, so does the pressure to intensify production, increasing the risk of overexploitation of these natural resources. Sustainability corresponds to the preservation of something that exists in the present and must be maintained in the future, implying accountability and obligation. However, in order to maintain the conditions and essential goods for the survival of future generations, consumers and businesses must commit to sustainable practices. The circular economy is considered one of the solutions to promote a sustainable system and can be defined as a transition from a linear model, where resources are transformed, used and discarded, to a circular (regenerative) model, where materials are reused whenever possible. An ecologically correct approach to waste reuse avoids the negative impacts associated with improper disposal of agro-industrial wastes, such as mass proliferation of microorganisms, production of greenhouse gases, loss of energy potential, and other negative impacts on the environment or human health. The objective of this study is to provide a compilation of good agricultural practices that promote sustainability in the production of medicinal and aromatic herbs, particularly in the areas of cultivation, harvesting, drying, extraction, and packaging, and to highlight the potential for evaluating processing residues in medicinal and aromatic herbs.

Waste-to-Hydrogen (Wahh) is a process of converting waste into hydrogen gas through various methods such as thermal conversion, biological conversion, and chemical conversion. This process not only helps in managing waste but also provides a clean source of energy as hydrogen is a renewable energy source that produces zero greenhouse gas emissions during combustion. Wahh has the potential to provide a sustainable solution for energy generation and waste management in the current scenario of globally increasing energy demands. This study aims to examine the properties and energy efficiencies of various renewable fuels including fuelwood, biogas, biomethane, and biohydrogen with a specific focus on differentiating the characteristics of biohydrogen. The paper explores the emerging concepts of waste-to-hydrogen microgrids, biohydrogen refineries, biohydrogen prosumer networks, and a biohydrogen circular economy, as well as Public-Private-People Partnerships (4Ps) and the hydrogen-centric renewable energy revolution, which are taking shape in industrialized countries. The study presents a comprehensive feasibility analysis of these concepts in the context of Nepal. The results of this research will provide valuable insights into the potential for adopting these innovative technologies in Nepal and will contribute to the development of a sustainable and efficient energy system.

The purpose of this paper is to propose a tool to measure the performance of a Strategic Asset Management Plan (SAMP) based on a Balanced Scorecard (BSC). The SAMP converts organizational objectives into asset management objectives, also specifies the role of the asset management system and brings support to achieve asset management objectives. The SAMP becomes the heart of the organization and integrates with long-term, medium-term, and short-term financial plans integrated with same term activity plans. In the SAMP, the balance among performance, costs and risks is also taken into consideration in order to achieve the organization’s objectives. On the other side, the SAMP is a guide to set the asset management objectives while describing the role of the Asset Management System (AMS) in meeting those objectives. While SAMP is the central figure of AMS, it is important to measure its performance and needs to be build and improved through an iterative process, what means that is not just a document, it is “the document”, and should be treated as a “living being” that needs to adapt to internal and external changes quickly. The BSC is an excellent tool where, through the appropriate Key Performance Indicators (KPIs), the progress can be measured, and is supported by four perspectives: Financial; Customer; Internal Process; and Learning and Growth.

Drag-dominant tidal turbine energy holds tremendous clean energy potential but faces significant hurdles as unsuitability of Disk Actuator theory due to the varying swept blockage area, unaccounted bypass flow downstream interaction and rotor parasitic drag whereas Blade Element Momentum theory is computably effective for majorly 3-blade lift-dominated aerofoil. This study proposes a novel method to find the optimal TSR of any turbine with a cost-effective and user-friendly Moment Balancing algorithm to support robust tidal energy development. Performance analysis CFD study of Pinwheel and Savonius tidal turbines was carried out. Dynamic TSR matrix was developed with varying rotational speeds and fluid velocities for reliability, unlike previous works simulated at a fixed fluid velocity. Novel parameters such as thrust and idle moment are introduced as functions of only inlet fluid velocity and rotational speed respectively. These relationships are verified through regression analysis, and the turbines' net moment equations are established based on these parameters. Rotational speed was a reliable predictor for Pinwheel's idle moment, while inlet velocity was a reliable predictor for thrust moment in both models. The optimal (Cp, TSR) values for Pinwheel and Savonius turbines were (2.37, 0.223) and (0.63, 0.16) respectively, within an acceptable error range for experimental validation.

E-commerce has gained increased popularity over the last decade. To date, there is an open debate as to whether e-commerce or brick-and-mortar shopping is environmentally less sustainable, especially due to the growing mobility resources needed for e-commerce distribution. The analysis at hand compares the CO2-equivalent emissions of e-commerce and brick-and-mortar shopping of pharmaceutical products considering spatial aspects and the typical transport modal mix of consumers when doing online and offline shopping. The object of analysis is a retailer of pharmaceutical products, more precisely medicines, which offers, both, brick-and-mortar shop and online shopping possibilities. The results show that spatial aspects concerning the residential location of consumers, the vehicles used for shopping trips, the shopping basked size, and trip-chaining effects have a crucial impact on the mobility demand and CO2-equivalent emissions of the two commerce forms. In general, for rural and sub-urban areas, e-commerce results in lower CO2-equivalent emissions, while in urban areas, brick-and-mortar shopping is the favourable solution, if the consumers walk or cycle to the next pharmacy.

This research aims to contribute to the growing body of knowledge of Collaborative Consumption (CC) by exploring the motivations that influence the use of Peer-to-Peer (P2P) accommodation platforms from the demand side. There has been a significant increase in interest in sustainable choices regarding P2P accommodation in recent years. To address this gap and contribute to the collaborative consumption and P2P accommodation theory a quantitative study was conducted through a survey yielding 235 responses from both users and non-users of P2P platforms. The findings of this study suggest that P2P accommodation platform usage is influenced by multiple motivations, including sustainability, belonging, economic benefits, and convenience. Interestingly, the study also found that individuals with higher levels of academic qualifications are more likely to adopt this mode of consumption. Moreover, the study is the first of its kind to quantitatively address this topic and, therefore, contributes significantly to the field of collaborative consumption and P2P accommodation theory. By understanding the motivations of P2P platform users, policymakers and practitioners can develop targeted strategies to promote sustainable choices in this sector. Overall, this study provides a useful framework for future research on collaborative consumption and sustainable P2P accommodation.

Extensive use of petrochemical plastic packaging leads to the greenhouse gas emission and con-tamination to soil and oceans, posing major threats to the ecosystem. The packaging needs, hence, are shifting to bioplastics with natural biodegradability. Lignocellulose, the biomass from forest and agriculture, can produce cellulose nanofibrils (CNF), a biodegradable material with ac-ceptable functional properties, that can make packaging among other products. CNF extracted from lignocellulosic wastes can lower the packaging carbon footprint and the production cost. Most of these low value feedstocks go to alternative applications, that make their use in CNF packaging competitive. To transfer the waste materials from current practices to the packaging production, it is imperative to assess their sustainability, encompassing environmental and eco-nomic impacts along with the feedstock physical and chemical properties. A consolidated over-view of these criteria is absent in the literature. This study performs an iterative literature review and presents thirteen attributes, delineating sustainability of lignocellulosic wastes for commer-cial CNF packaging production. These criteria data are gathered for the UK waste streams, and transformed into a quantitative matrix, evaluating the waste feedstock sustainability for CNF packaging production. The presented approach can be adopted to decision scenarios in bioplas-tics packaging conversion and waste management.

Palm oil production involves unit operations that lead to greenhouse gas emissions. A typical mill is estimated to produce greenhouse gas emissions of 637–1,131 kg CO2 eq/t crude palm oil. There has been a huge effort to reduce the carbon footprint of palm oil mills. However, the data from such research have not been consolidated. This paper reviews significant information, results, and conclusions derived from studies in the literature. The latest developments in palm oil milling operations and information on greenhouse gas emissions are presented. Current initiatives in reducing carbon footprint of palm oil mills are discussed along with an assessment of the technologies employed. These include the conventional method of capturing biogas from palm oil mill effluent and emerging approaches such as converting palm sludge oil into biodiesel, deploying enzyme-assisted oil extraction, and converting biomass into fuel for energy generation as an alternative to coal and other fossil fuels. The importance of self-sufficiency is deliberated because a self-sufficient palm oil mill is estimated to reduce emissions by 457 kg CO2 eq/t crude palm oil compared to a mill that requires an external power supply. Methods with the greatest positive effect on the carbon footprint are identified for further investigation.

Archaeology is often argued to provide a unique long-term perspective on humans that can be utilised for effective policy-making, for example in discussions of resilience and sustainability. However, the specific archaeological evidence for resilient/sustainable systems is rarely explored, with these terms used simply to describe a community that survived a particular shock. In this study, a set of 74 case studies of papers discussing archaeological evidence for resilience/sustainability are identified and analysed using bibliometric methods. Variables from the papers are also quantified to assess patterns and provide a review of current knowledge. A great variety of scales of analysis, case study locations, stressors, resilient/sustainable characteristics, and archaeological evidence types are present. Climate change was the most cited stressor (n=40) and strategies relating to natural resources were common across case studies, especially subsistence adaptations (n=35), other solutions to subsistence deficiencies (n=23), and water management (n=23). Resilient/sustainable characteristics were often in direct contrast to one-another, suggesting the combination of factors is more important than each factor taken individually. Further quantification of well-defined variables within a formally-produced framework is required to extract greater value from archaeological case studies of resilience/sustainability.

This article investigates the dynamics of socio-ecological systems (SESs) unsustainability. By adopting a theoretical standpoint grounded in systems’ theory, the analysis shows how SESs’ teleology (or final cause) is of the utmost relevance for understanding unsustainability and how it is pivotal for envisioning possible evolutionary trajectories towards sustainability. Building on the contributions of both system and social scientists, the study argues that SES’s teleology is determined by dominant social ontologies that require a dialectical lens to be properly dealt with. The article therefore proposes the adoption of the adaptive cycle heuristic complemented by an historical-geographical approach based on world-ecology theory as a means to dynamically model of SESs’ behaviour. Such a perspective allows for the direct comparison between the four stages of the panarchy cycle (reorganization, exploitation, conservation, and release) and the four stages theorized by the world-ecology dialectics (expansion, appropriation, capitalization, crisis). In conclusion, the article claims that both system and social scientists would benefit from including in their analysis concepts and definitions from the other field, since both provide valuable insights about SESs' processes of change and both are necessary to envision transition pathways towards sustainability.

There is a growing recognition of the need to incorporate sustainability considerations early-on in the product development (PD) process (PDP). As part of a case study at an engineering consultancy firm, this paper identifies considerations that influence the integration of sustainable design practices into real-world PD practices. This is informed by the first author getting embedded in the firm as an intern, and closely observing the PD workflow across various projects, conducting interviews and group discussions with a wide range of practitioners, and iteratively designing and testing various potential interventions. From literature and observation, we find that designers and engineers often struggle to identify and apply the right sustainable design methods and tools (SDMTs) to tackle the environmental impacts associated with their products. Through a human-centered design process, we co-created a reusable, modular framework of practices that aids the selection of relevant strategies, based on the environmental hotspots, stage of the PD process, and the client’s sustainability priorities. The paper further presents insights related to the framework’s real-world application and impacts in the firm, based on results of longitudinal engagement with the firm.

The ongoing exponential growth of human population poses a risk to sustainable development goals (SDGs). Unless we understand the drivers of this growth and inform policy development accordingly, SDGs would remain a dream. One of the old theories of population growth known as the Malthusian theory predicts that resource availability drives population growth to a certain time when population growth outrun resource availability, leading to all sort of crises known as Malthusian crisis. Although the link between economic growth and population has been widely investigated while testing the theory, little is known about environmental and social factors po-tentially driving population growth. Here, because of various crises of our time recalling the Malthusian crisis, we revisited the theory by fitting structural equation models to environmental, social and economic data collected over 30-year period in South Africa. None of the social varia-bles tested predicts population growth. Instead, we found that biodiversity (species protection index) correlates positively with population growth. Biodiversity provides various resources through ecosystem goods and services to human, thus supporting population growth as pre-dicted in the Malthusian theory. However, we also found that this population growth may lead to conservation conflict as we found that biodiversity habitat (wetland area) correlates negatively with population growth, thus raising the compromising effect of population growth on life on earth. What’s more, we found a significant link between economic growth measured as GDP and population growth, further supporting the Malthusian prediction. Overall, our study re-affirms the value of biodiversity to human and suggests that the Malthusian theory should continuously be tested with predictors other than economic.

Many countries have implemented free early childhood education to solve the affordability and accessibility problems without considering the sustainability of policy; thus, they have to discontinue the policy. The city of Nanjing, China, is no exception. This case study adopted a mixed-methods approach to understanding how and why the policy was formulated, implemented, and failed in the city, using the “policy cycle” framework. Altogether 232 kindergarten principals and teaching/research staff were randomly sampled and surveyed, and 5 kindergarten principals and 5 teaching/researcher staff were interviewed. The results indicated that there were many obstacles to the policy’s sustainability, including the conflict of interest, the inefficient policy implementation, the insufficient funding, and more social inequality issues. And the policymakers made mistakes in the five domains of the policy cycle: the context of influence, the context of policy text production, the context of practice, the context of outcomes, and the context of political strategy. Finally, the lessons for a more sustainable policy decision process are discussed.

The ageing transformation of digital health services faces issues of how to distinguish influencing factors, redesign services, and effectively promote measures and policies. In this study, in-depth interviews are conducted and grounded theory applied to open coding, main axis coding, and selective coding to form concepts and categories. Trajectory equifinality modeling clarified the evolution logic of digital transformation. Based on the theory of service ecology, a digital health service ageing model is constructed from the "macro-medium-micro" stages and includes governance, service, and technology transformation paths. The macro stage relies on organizational elements to promote the institutionalization of management and guide the transformation of governance for value realization, including the construction of three categories: mechanism, indemnification, and decision-making. The meso stage relies on service elements to promote service design and realize service transformation suitable for aging design, including the construction of three categories: organization, resources, and processes. The micro stage relies on technical elements to practice experiencing humanization, including the construction of three categories: target, methods, and evaluation. These results deepen the understanding of the main behaviors and roles of macro-organizational, meso-service, and micro-technical elements in digital transformation practice and have positive significance for health administrative agencies to implement action strategies.

Conventional academic debate on sustainability and transformation has begun to be disputed by researchers, policymakers and other stakeholders from the private sector. The complexity of linking sustainability with transformation necessitates the development of new ways of understanding and explaining actors, processes, issues, structures, and outcomes related to transformation to sustainability (T2S). A persistent problem in understanding and managing the T2S is the implied notion of a monolithic transformation to achieve sustainability. This notion underestimates the diversity of actors as well as the historical contexts of transformations. At the same time, achieving T2S is highly dependent on technical solutions as well as policies that can stir needed behavioural change, whereas these technical solutions and policies are not always socially acceptable or politically implementable. Therefore, achieving T2S also calls for evaluating normative foundations of policies and actions needed to advance T2S. This article argues that T2S is composed of different phases, each of which having a different set of actors, resources and audience. This article explains how collective decision can be achieved through multiple levels and types of negotiations that occur in an orchestrated manner. To understand this, this article introduces a theoretical model as an analytical framework to structure how T2S unfolds. This model uses insights from negotiation studies to focus on the actors’ perspectives on T2S. It proposes the division of the transformation process into phases – entry point, learning, sequencing, disrupting and fortifying. Using the Germany’s energy transition (Energiewende), each of these phases is analysed to determine the “quality” of cooperation that can help fulfil the tasks required to master the so-called “cognitive games” of T2S (ripeness game, power game, bargaining game, policy game, scaling game). Moreover, insights are presented to explain how the designated milestone can be achieved that indicates the advancing to the next phase and eventually entrench the transformation process. The lessons and findings resulting from the analysis of the phases of T2S suggest that there is also the need to revisit underlying assumptions on negotiations, sustainability and transformation.

A summer high school baseball tournament is held every mid-summer in Koshien Stadium. “Koshien Baseball” is very popular in Japan; however, it faces the problem of extremely high temperatures during games. Thus, high school players are threatened by the harsh environment. For this reason, Internet surveys were conducted twice to purposefully engage the same individuals. Then, information on their views regarding the Koshien tournament before and after the provision of information regarding environmental change in Japan was gathered. Using data, this study examined how their views changed after having the information. Compared with the view before, it was found that (1) respondents were more likely to agree that the management rule of the Koshien tournaments should be altered to protect player’s health, and (2) the impact of providing information is larger for female respondents, young people, and highly educated respondents.

This article has been developed to assess the economic feasibility of a roof-top photovoltaic installation of industrial self-consumption. Numerical models that enable an interested person to obtain the main expected parameters will be generated. To do this, a calculation methodology will be generated through which the reader, knowing the location of the facility and dimensions of the roof, will be able to calculate the maximum installable power, the main parameters related to production, the cost of the installation, and the LCOE of the plant. The use of actual costs will be facilitated in case they are known, but it will remain possible to apply the costs of the major equipment (modules, inverter, and structure) considered throughout the article. This developed calculation methodology will also allow a quick comparison of the forecasts of production, CAPEX, and LCOE of plants designed with different inclinations and different types of modules. Consequently, it will be especially useful for decision-making before developing the plant's basic engineering. Moreover, the calculations used for modeling the LCOE will be analyzed in depth. This analysis will allow evaluating how the different technical variables affect the profitability of a photovoltaic installation, such as the selected tilt, the location, the module's technology, or the available area.

Permeable pavements have been the subject of numerous studies in recent decades. The possibility of dissipating stormwater more smoothly and generating numerous benefits to the environment and users makes the use of permeable pavements an excellent possibility of integration into sustainable and resilient water management systems in cities. In Brazil, numerous studies on the quantity and quality of infiltrated water, permeability of the coating, clogging, environmental burden, feasibility, among other characteristics, have been researched. Within this theme, the Federal University of Santa Catarina (UFSC) has contributed with ten papers in the research of permeable pavements in the last six years, which address various topics about the effectiveness and applicability of permeable pavements. This paper reviews the studies conducted at UFSC on permeable pavements and discusses the different results within the main issues found. In general, the selected documents addressed seven themes in the studies: potential for potable water savings, clogging, quantity and quality of the water infiltrated into the pavement, Life Cycle Assessment (LCA) and its variants, and hydraulic and structural design details. More specifically, many selected papers assess the potential use of stormwater harvested through permeable pavements in non-potable uses of buildings. The possibility of aligning the benefits of green infrastructure with the rational use of water expands the advantages of the system and can help prevent future water scarcity, as well as reduce the environmental impacts of paving.

(1) Background: Due to the high proportion of disadvantaged students in a rural school in Taiwan and the gap between students’ concepts and practices of environmental protection and sustainable energy, four science and mathematics teachers in this school planned an engineering-centered PjBL of sustainable energy curriculum in a Makers Club to enhance students’ creativity, engineering skills, practices of environmental protection and sustainable energy, and learning attitudes; (2) Methods: This study is four-year action research. Teachers and students initiated the idea from rebuilding an old fan in a classroom; (3) Results: The students in the Makers Club improved their engineering skills and created various green-power generation devices (evolved from ventilation ball generator, hydropower, ocean current power generators to tiny, 3D-printing wind power generators). They turned environmental protection and sustainable energy concepts into actions during practices and won awards from science and engineering fairs every year. This creative and supportive atmosphere spread from the club to the whole school and improved the students’ practices of environmental protection and learning attitudes after long-term implementation; (4) Conclusions: The design principles of the engineering-centered PjBL of sustainable energy curriculum played a critical role and were outlined at the end of the study.

Literature revealed the potential of using guayule resin for asphalt cement replacement from the binder’s perspective. However, monitoring guayule resin through binder-aggregate mixture could disclose its performance through field. In this study, designated binders were employed to investigate the applicability of such an innovative replacer through mixture, which were neat asphalt and guayule-based binders (neat guayule, asphalt-rubber-guayule, guayule-rubber binders). Consecutively, field-simulated lab mixtures were prepared to investigate the major distresses. Moisture damage, rutting, fatigue cracking, and thermal cracking resistances were investigated using the modified Lottman (TSR) test, rut test by asphalt pavement analyzer (APA), semi-circular bending (SCB) test, and disk-shaped compact tension (DCT) test, respectively. Additionally, the Hamburg wheel-tracking (HWT) test was employed to evaluate moisture susceptibility and rutting resistance. Outcomes revealed that the neat guayule was susceptible to moisture damage at a 7% air content (V_a) when the TSR test was employed. In contrast, all investigated mixtures yielded perfect performances against moisture susceptibility under the HWT test. Guayule-based mixtures perfectly resisted rutting, as analyzed by the rut test and HWT test. Generally, changing parameters (e.g., V_a, rubber addition, and partial asphalt replacement by guayule and rubber) enhanced the guayule-based mixture resistance to rutting and moisture damage resulting in acceptable performances. Guayule-based mixture had a high fracture toughness at low temperatures, hence fatigue fracture resistance at intermediate temperatures. Neat guayule mixture with or without rubber addition did not entirely resist thermal fracture. However, partial asphalt replacement by guayule and rubber resisted the thermal fracture to a great extent.

The sustainable management of Land - Water - Energy - Food (LWEF) nexus requires an envi-ronmental characterization that allows the comparison of complex interlinkages between nexus resources and livelihoods. This complexity makes this characterization difficult coupled with limited study in quantifying sustainability of LWEF nexus and its linkage with livelihood. Therefore, the present study aimed to investigate the link between sustainable LWEF nexus and livelihoods. We used analytical hierarchy process and pairwise comparison matrix in combina-tion with weighting model. The result of composite LWEF nexus index was 0.083 representing, low sustainability. This could be linked with nexus resources consumption, use, and manage-ment. From the analysis of the weight of land, water, energy and food nexus resources, the highest weight was observed for food. The focus of on food production only shows no clear synergy on provisioning, supporting or regulating nexus resources to address livelihoods. The result further showed that LWEF nexus resources have strong correlation with livelihoods. This was evidenced by social (r>0.8, P<0.01), natural (r>0.3, P<0.05) and physical (r>0.6, P<0.01) liveli-hood indicators showed strong positive correlation with LWEF nexus resources. From this re-sults, it was observed that managing nexus resources not only provide a significant contribution to achieve sustainable LWEF nexus, but also be effective for enhancing livelihood through food security. This could be attained by strong evidence based policy to ensure sustainable use of nexus resources. The results provided by this study would serve as the foundation for future study, policy formulation and implementation.

Abstract This article examines the implementation of the Swedish national environmental quality objectives and discusses what can be learnt for the equivalent process for the set of global UN 2030 goals (SDGs), established in 2015. The empirical basis is a study on 50 large companies in Sweden and their use of these objectives in their policy formulation. The SDGs are crafted with a broader approach than the Swedish national environmental quality objectives. Therefore, the SDGs probably better reflect the agenda of the business community since they have a global character, cover the whole spectrum of important sustainability issues and provide a mutual agenda for the business community world-wide. More than 90 percent of the large companies in the study have explicitly committed themselves to the SDGs, only 1-2 years after they were published, whereas similar commitments hardly exist for the national environmental quality objectives, even 20 years after its establishment. A large majority of the large companies in this study know about the SDGs, have actively endorsed them, and started to adjust their activities accordingly. At the end, the results of these endorsements remain to be seen.

Cooperative organizations try to balance economic viability and Corporate Social Responsibility (CSR) management through strategic policies that involve dialogue, participation and engagement with stakeholders. To measure the impact of CSR management, the electricity sector implements monitoring processes and models, such as the Sustainability Reporting Standards of the Global Reporting Initiative (GRI), which measure contributions to the Sustainable Development Goals (SDGs) of the United Nations 2030 Agenda. This research analyses the strategic management of CSR in the 28 electric cooperatives that market electricity in Spain with the aim of determining their level of commitment to CSR and stakeholder participation in their corporate policies. The analysis is based on the descriptive-exploratory study of the whole population of electric cooperatives. The results indicate that the CSR management of most electric cooperatives is still in an emerging stage within the Value Curve. Importantly, there is a significant percentage of cooperatives that have already advanced towards the consolidating and institutionalized stages. However, most of these social-economy organizations are not developing programs that link their CSR strategies with their priority SDGs and sustainability as commitment to their community.

Information and communication technologies (ICT) are increasingly permeating our daily life and we ever more commit our data to the cloud. Events like the COVID-19 pandemic put an exceptional burden upon ICT infrastructures. This involves increasing implementation and use of data centers, which increased energy use and environmental impact. The scope of this work is to take stock on data center impact, opportunities, and assessment. First, we estimate impact entity. Then, we review strategies for efficiency and energy conservation in data centers. Energy use pertain to power distribution, IT-equipment, and non-IT equipment (e.g. cooling): Existing and prospected strategies and initiatives in these sectors are identified. Among key elements are innovative cooling techniques, natural resources, automation, low-power electronics, and equipment with extended thermal limits. Research perspectives are identified and estimates of improvement opportunities are presented. Finally, we present an overview on existing metrics, regulatory framework, and bodies concerned.

The purpose of the study was to provide support in the decision-making process for architects and engineers regarding large-spans structures for the presentation of archaeological sites in situ - construction of roofs, shelters, and bridges. We examined existing practice and analyzed their engineering classifications looking for a pattern in their application regarding sustainability and relation between type of cultural heritage site and type of applied large span structure. Contemporary engineering structures at built heritage sites create a sharp contrast between old and new. A presentation of cultural heritage in situ requires an understanding of heritage theory and internationally accepted doctrine which exceeds common engineering education. Nevertheless, application of large-span structures, which often take advantages of state-of-art construction-technologies nowadays, is also an aesthetical statement that affects the appearance of the site. Therefore, we gave an overview of the theoretical background of aesthetical issues and the overall ethics of the decision-making process in such sensitive cases. Within the framework of heritage-presentation, engineering and architectural issues, and selected case studies, we concluded in favor of the application of large-span structures under certain conditions.

Cities are small on earth’s surface but they are the most attractive places for people to live and work; cities are developing quickly, thus it’s important to keep it a better quality place to live as it has the major of the economic activities and more job opportunities and other social and economic advantages to be a more green and sustainable place. Seeking to achieve sustainable use of ecosystems and conserve natural resources in the city of Prague; integrating ecological sustainability goals, the political borders as a reflection of urban development in the city, and ecosystems edges in blue and green functions impact the city development, and present opportunities to create strategies for green and blue infrastructure and clarifying threats could slow down the process to achieve the sustainability and greenery application. Also checking possible urban areas for development like brownfields and clarifying their relationship with political borders and ecosystems to find possible areas to add for sustainable green use, which will create better places for people to live and raise the value of life as well.

Urban settings are increasingly faced with challenges across natural and engineered environmental systems, threatening the sustainability of urban centers where >50% of the world's population resides. The pressures of aging infrastructure, water and air pollution, and environmental justice exemplify the growing need for urban professionals to employ complex scientific reasoning across disciplines where they can effectively address the multi-faceted issues of urban sustainability. Here we present an innovative model for preparing the next generation of public, private, and academic leaders to address complex problems in urban sustainability. Specifically, we outline the design and implementation of an integrated, adaptable graduate training program, with the goals of science leadership, curriculum relevancy, community impact, broader applicability, recruitment into science, technology, engineering and mathematics (STEM) programs and careers, and program sustainability. This program addresses human-ecosystem challenges using a transdisciplinary approach to produce scientific products in partnership with local communities, businesses, industries, scientists, and policy makers, while providing a mechanism to understand and overcome contemporary societal challenges. Students receive rigorous training in their home disciplines, coupled with training across disciplinary lines and developmental experiences, to prepare them to communicate, collaborate, and innovate in a variety of contexts. Training success is evaluated across measurable competency domains including problem definition, research methods, communication, collaboration, and problem-solving. After three years the program expanded relationships across fields and professions, successfully established 18 internship opportunities with community partners, created a new dual-title PhD program open to students in 5 academic departments, and facilitated the co-production of knowledge with external partners. This model bridges the gaps between research, education, and application, providing an integrated, rigorous graduate training program that fosters collaborative problem-solving between STEM graduate students and the broader community of professionals conducting sustainability work in a post-industrial urban setting.

This paper explores decision analysis on product integration of family security services and residential fire insurance in the London and Taiwan markets by using the proposed mathematical models for counting sustainable value. This paper shows the five main different results between London and Taiwan markets with ten different parameters of the family security market, to find out the optimal number of family security integrated services for each security company in London. The improvement of the risk aversion effect based on risk and financial management will enhance the market share of the private security industries in the London and Taiwan markets. The results of this research can serve as a reference for the decision-making of private security industries on product integration under sustainable value consideration. The research findings highlight the potential benefits for both the private security industry and the insurance industry in their design and negotiation for product integration to improve both of business operation and achieve corporate social responsibility goals to match the sustainability in the future.

Today’s export-based manufacturers face the need to implement green supply chains more efficiently in order to overcome environmental barriers in increasingly competitive export markets and to improve export performance. This study examines the structural relationship between environmental collaboration, green innovation capacity, and performance based on the findings of previous studies in order to identify the factors affecting the green supply chain management (GSCM) performance of Korean export-based manufacturers. The study finds that environmental collaboration in the green supply chain environment is an important driver of green innovation capacity for export-based Korean manufacturers. It also finds that green innovation capacity has a positive effect on export performance through environmental performance. This study establishes a theoretical basis for the systematic study of the structural mechanisms of green supply chains and suggests strategic directions for export-based manufacturing firms’ successful GSCM implementation.

Green Infrastructures (GI) are considered key to reconcile ecological and social benefits by providing multiple functions. The concept is increasingly promoted and guidelines for its implementation have been developed in many countries and regions of the Western Hemisphere. However, for other parts of the world, especially for countries with less developed infrastructures, promotion, guidance for decision-making and manuals for GI are often lacking. But the state of infrastructure development and often unplanned character of settlements in the Global South differ and result in specific constraints as well as demands to GI that need to be addressed explicitly. This study presents a methodological approach to explicitly address the specific conditions and physical limitations to GI development in urban areas of the Global South. A four step methodology was developed to assess the implementation potential for retrofitted and multifunctional urban green infrastructure in public areas. An initial site analysis (1) and the definition of design criteria as well as general strategies (2) to achieve the different dimensions of multi-functionality are the basis to derive spatial typologies (3) for GI elements and finally the spatial suitability assessment for potential placements (4). An application of the methodology to a study area in the metropolitan region of San José, Costa Rica, shows exemplarily that the potential to improve the hydrological conditions (up to 34% of surface runoff reduction), ecological conditions (increase of green space by 2,2 %, creation of 1500 m length of roadside greenery and two new habitat types), and social conditions (2.200 m of road type upgrading) of multi-functionality of the site through Green Infrastructures. These assessment results of different multi-functionality dimension can serve as a guidance for GI promotion and implementation in urban areas of the Global South.

The Sustainable Development Goals (SDGs) purport to report holistically on progress towards sustainability and do so using more than 231 discrete indicators with a primary objective to achieve a balance between the environment, social and economic aspects of development. The research question underpinning the analyses presented in this paper is: are the indicators in the SDGs sufficient and fit-for-purpose to assess the trajectory of natural resources towards sustainability? We extracted the SDG indicators that monitor the state of natural resources, or alternately support policy or governance for their protection, and determined if these are adequate to provide the essential data on natural resources to achieve the aims of the SDGs. The indicators are clustered into four natural resource categories; land, water (both marine and freshwater), air and biodiversity. Indicators for monitoring land resources show that the most comprehensive land resource indicator, for degraded land, is not fully implemented and that missing from land monitoring is an evaluation of vegetation health outside of forests and mountains, the condition of soils, and most importantly the overall health of terrestrial ecosystems. Indicators for monitoring water resources have substantial gaps, unable to properly monitor water quality, water stress, many aspects of marine resources and most significantly, the health of fresh and salt water ecosystems. Indicators for monitoring of air have recently become more comprehensive, but linkage to IPCC results would benefit both programmes. Monitoring of biodiversity is perhaps the greatest weakness of the SDG Agenda, having no comprehensive assessment even though narrow aspects are monitored. Again, deliberate linkages to other global biodiversity programmes (e.g. CBD and the Post 2020 Biodiversity Framework; IPBES; Living Planet, etc.) are recommended on condition that data can be defined at a country level. While the SDG list of indicators in support of natural resource is moderately comprehensive, it lacks holistic monitoring in relation to evaluation of ecosystems and biodiversity to the extent that these missing but vital measures of sustainability threaten the entire SDG Agenda. In addition, an emerging issue is that even where there are appropriate indicators, the amount of country-level data remains inadequate to fully evaluate sustainability. This signals the delicate balance between the extent and complexity of the SDG Agenda and uptake at a country level

The recent outbreak of a new Coronavirus has developed into a global pandemic with about 10,5 million reported cases and over 500,000 deaths worldwide. Our prospective paper reports an updated analysis of the impact that this pandemic had on the Italian agri-food sector during the national lockdown and discusses why and how this unprecedented economic crisis could be a turning point to deal with the overall sustainability of food and agricultural systems in the frame of the forthcoming European Green Deal. Its introductory part includes a wide-ranging examination of the first quarter of pandemic emergency, with a specific focus on the primary production, to be understood as agriculture (i.e. crops and livestock, and their food products), fisheries and forestry. The effect on the typical food and wine exports, and the local environment tourism segments is also taken into account in this analysis, because of their old and deep roots into the cultural and historical heritage of the country. The subsequent part of the paper is centered on strategic lines and research networks for an efficient socio-economic and territorial restart, and a faster transition to sustainability in the frame of a circular bio-economy. Particular emphasis is given to the urgent need of investments in research and development concerning agriculture, in terms of not only a fruitful penetration of the agro-tech for a next-generation agri-food era, but also a deeper attention to the natural and environmental resources, including forestry. As for the rest of Europe, Italy demands actions to expand knowledge and strengthen research applied to technology transfer for innovation activities aimed at providing solutions for a climate neutral and resilient society, in reference to primary production to ensure food security and nutrition quality. Our expectation is that science and culture return to play a central role in national society, as their main actors are capable of making a pivotal contribution to renew and restart the whole primary sector and agri-food industry, addressing also social and environmental issues, and so accelerating the transition to sustainability.

The interest in high homogenization pressure technology has grown over the years. It is a green technology with low energy consumption, not generating high CO2 emissions or polluting effluents. The main food applications derive from its effect on particle size, causing a more homogeneous distribution of fluid elements (particles, globules, droplets, aggregates, etc.) and favouring the release of intracellular components; and its effect on the structure and configuration of chemical components such as polyphenols and macromolecules such as carbohydrates (fibres) and proteins (also microorganisms and enzymes). The challenges of the 21st century lead food industry processing towards obtaining food with high nutritional quality and taking advantage of waste to obtain ingredients with specific properties. For this purpose, soft and non-thermal technologies such as high pressures homogenization have a huge potential. The objective of this work is to review how the need to combine safety, functionality and sustainability in food industry has conditioned the last decade applications of high-pressure homogenization technology.