This study investigates how customers’ technological readiness affects service quality and the adoption of self-service banking by developing an empirical model. The model was proposed to explore the relationships between technology readiness, self-service quality, and customer satisfaction. The hypotheses and stability of the model were tested using structural equation modeling. The findings revealed that technology readiness, including the optimism, innovation, and insecurity dimensions, had a significant positive impact on self-service quality. In addition, service quality fully mediated the relationship between technological readiness and customer satisfaction. These results suggest that when customers are ready to embrace and use new technology, their evaluation of service quality is high. Thus, bank managers should drive customer perceptions of the quality of self-service banking by improving their technological readiness through various measures. Furthermore, based on the mediating effect of self-service quality, banks must be aware that improving service quality can enhance customer satisfaction and maintain a competitive advantage.

Background/Objectives: Cardiovascular diseases are one of the leading causes of morbidity and mortality worldwide. Health-related quality of life is crucial to assess the impact of cardiovascular diseases and to guide therapeutic strategies. The Short Form 36 Health Survey and the RAND 36-Item Health Survey questionnaires are common tools for measuring health-related quality of life in patients with cardiovascular disease, but their reliability may vary according to the population studied. The aim of this study is to compare the reliability of the SF-36 and the RAND-36 in a population with cardiac pathology, addressing the question of which of these instruments offers a more consistent and useful measurement in this specific group. Methods: Cross-sectional observational study carried out at the University Hospital of Burgos (Spain). 413 patients with cardiovascular pathology referred to the Cardiac Rehabilitation Unit were included. Patients with incomplete data or who did not participate in the program were excluded. Internal consistency (Cronbach’s alpha), item-total correlation and reliability and a half-half analysis were performed. Results: Both questionnaires showed similar and adequate reliability for patients with cardiovascular pathology. Internal consistency, as measured by Cronbach’s alpha, was above 0.80 for most dimensions, supporting its robustness. Significant inter-item and inter-dimension correlations were found in both scales, except in some specific cases in the dimension ‘Physical Functioning’. The half-half analysis confirmed the good reliability of both scales. Conclusions: Both the SF-36 and the RAND-36 are highly reliable tools for assessing health-related quality of life in patients with cardiovascular disease. The results may have significant implications for clinical practice, helping in the selection of health-related quality of life monitoring instruments and in the evaluation of the efficacy of therapeutic interventions.

Live-streaming commerce (LSC) is a new shopping method that combines the characteristics of social commerce and e-commerce. Since the global coronavirus disease 2019 (COVID-19) outbreak, the number of branded platforms is growing rapidly, and their competition is fiercer than ever. Understanding consumer needs and improving service quality become the key issue for survival. This study aims to develop and empirically validate a multi-dimensional hierarchical model for measuring service quality on LSC platforms. A hierarchical reflective construct was proposed to capture dimensions based on literature on e-retail and social commerce service quality. The pro-posed model was rigorously tested using two waves of survey data through the partial least squares method. Results showed that the service quality of LSC is a third-order, reflective con-struct and includes five primary dimensions (the streamer’s interaction quality, physical envi-ronment, website quality, outcome quality and ordering process) and twelve sub-dimensions (trustworthiness, expertise, responsiveness, telepresence, consumption scenarios, information quality, system operation quality, fulfillment and refund/compensation, privacy/security, contact and ease of use). Findings also supported the hypothesis that service quality has a significant impact on customers’ satisfaction and their behavioral intentions. Furthermore, we tested an al-ternative model, and the results showed that the relationship between dimensions and overall assessment is reflective rather than formative. We offered directions for further research on LSC service quality and discussed managerial implications stemming from the empirical findings.

As an emerging model, self-service fitness centers are reshaping the consumer fitness experience globally. Given the crucial role of customer loyalty in the sustainable operation and management of fitness service enterprises, this study constructs a structural model incorporating service quality, service convenience, customer satisfaction, word-of-mouth intentions, and repatronage intentions. The model is designed to elucidate the factors and mechanisms impacting customer loyalty at self-service fitness centers and further investigates how these relationships are affected by service methods, either with staff or without staff. The study employs PLS-SEM to empirically analyze 552 customer questionnaires from four self-service fitness centers in first-tier cities in China. The results reveal positive correlations among the constructs in the structural model, emphasizing the important position of raising service quality standards and reducing the time and effort expended by customers in the management of customer loyalty. Concurrently, service convenience was found to play a significant driving role in customers' perceived service quality. Through the chain-mediating effect of service quality and customer satisfaction, service convenience exerts a considerable positive impact on word-of-mouth intentions and repatronage intentions. Moreover, the study reveals significant differences in these relationships when considering service methods, either with staff or without staff.

The quality of healthcare services is a very important indicator of social welfare in developed and emerging countries. Good quality levels are critical to ensuring patient safety, improving health outcomes, increasing patient satisfaction, optimizing resource utilization, and meeting regulatory requirements. The stable and sustainable operation of medical institutions urgently requires the establishment of a reliable and effective medical quality performance evaluation platform. However, the complexity of the evaluation process, involving numerous evaluators and the consideration of different subjective and objective criteria, poses significant challenges and essentially constitutes a group multi-criteria decision-making problem. This article uses the overall medical environment of the institution, medical service attitude, medical security, administrative service measures, etc. as measurement standards to deal with this challenge. It proposes a medical service quality measurement model suitable for both qualitative and quantitative analysis. In view of the heterogeneity of information, the two-tuple fuzzy language calculation method is introduced to enable evaluators to skillfully manage diverse information and effectively avoid potential information omission problems in the subjective evaluation integration process. The effectiveness and feasibility of the model were demonstrated by applying it to the operational framework of a medical institution in central Taiwan.

Quality of Service (QoS) has a significant role in the provision of resources within service oriented distributed systems. In Quality of Service, cloud computing creates new challenges for improvements using the concept of virtualization. Currently, Cloud Computing is very emerging technology in every field of data storage and resource distribution over the network. Considering this new emerging technology, for the ease of data accessibility, price, resource use, restoration, response time and number of constraints the quality performance measures need to be upgraded. The paper highlights the research gap in providing a solution to achieve a Quality of Services in Cloud Computing. We also review the issues and challenges arising in cloud computing to guarantee quality.

(1) Telemedicine in diabetic retinopathy (RD) screening is effective but does not reach the entire diabetes population. The use of portable cameras and artificial intelligence (AI) can help diabetes screening. (2) Methods: We evaluated the ability of two handheld cameras, one based on a smartphone and the other on a smartscope, to obtain images comparing OCT. Evaluation was done in two stages, the first by two retina specialists and the second using an artificial intelligence algorithm that we developed. (3) Results: The retina specialists report that the smartphone images must mydriasis in all cases compared to 73.05% of the smartscope images and 71.11% of the OCT images. Images were ungradable in 27.98% of the retinographs with the smartphone and 7.98% with the smartscope. The detection of any-DR using the AI algorithm showed that the smartphone obtained lower recall values (0.89) and F1scores (0.89) than the smartscope, with 0.99. The detection of Mild-DR using the smartphone also obtained low results (146 retinographs) compared to the smartscope (218 retinographs). (4) Conclusions: The use of handheld devices together with AI algorithms for reading retinographs can be useful for DR screening, although these devices need to improve the ease image acquisition through small pupils.

In the fast-evolving landscape of web services, success relies on optimizing efficiency, reliability, and user satisfaction. Decision-making in real-world applications demands a blend of quantitative (numerical values of quality of Service factors) and qualitative data of experts’ ratings of the quality of service factors. This paper proposes an optimization technique that integrates Hesitant and Intuitionistic Fuzzy Linguistic Terms with TOPSIS, leveraging Entropy Objective weights. There is limited research on Hesitant Intuitionistic Fuzzy Linguistic terms and the need to model fuzziness, haste and intuition in data precisely from experts rating. Thus, this article introduces an Entropy-based model tailored for web service optimization. Using the WS-DREAM dataset, quantitative data was extracted and objective weights were determined through the Entropy algorithm and qualitative evaluations from five experts, employing Hesitant Intuitionistic Fuzzy Linguistic Terms, were integrated. The process involved computing criteria weights and experts' assessment of Quality of Service factors for four services (S1, S2, S3, and S4) to form the Fuzzy Decision Matrix using modified Online output software. Applying the proposed technique to a web service optimization problem validated its effectiveness. The results indicated optimal selection of S1 as the best web service, supported by Coefficient Index values (0.785). This study introduces a novel approach, Entrop – Hesitationistic - Fuzz-TOPSIS, for web service optimization, integrating quantitative and qualitative data through an Entropy-based model. The effectiveness of the proposed technique, validated through application on the WS-DREAM dataset, underscores its potential in addressing real-world decision-making challenges. The optimal selection of S1 as the best web service suggests practical utility. The study encourages further exploration of this technique's applicability to diverse Multiple Criteria Decision Making (MCDM) problems, opening avenues for future research and application.

(1) Background: Applied health services research (AHSR) relies upon coordination across multiple organizational boundaries. Our aim was to understand how competing organizational and professional goals enhance or impede the conduct of high quality AHSR. (2) Methods: A qualitative study was conducted in two local health care systems in the UK, linked to a feasibility trial of a clinic-based intervention in secondary care. Data collection involved 24 semi-structured interviews with research managers, clinical research staff, health professionals, and patients. (3) Results: This study required a dynamic network of interactions between heterogeneous health and social care stakeholders, each characterized by differing ways of organizing activities which constitute their core functions; cultures of collaboration and interaction and understanding of what research involves and how it contributes to patient care. These interrelated factors compounded the occupational and organizational boundaries that hindered communication and coordination. (4) Conclusions: Despite the strategic development of multiple organizations to foster inter-professional collaboration, the competing goals of research and clinical practice can impede the conduct of high quality AHSR. To remedy this requires the alignment and streamlining of organizational goals, so that all agencies involved in AHSR develop a shared understanding and mutual respect for the progress of evidence-based medicine and the complex and often nuanced environments in which it is created and practiced.

One of the challenges of deploying Wireless Sensor Networks (WSN) at large scale is to operate for prolonged periods of time relying on the limited amounts of energy stored in its nodes. Generally, data communication is the main factor of draining energy. Consequently, reducing the amount of transmitted data by the nodes is of great interest. At the same time, reducing data to be transmitted should not decrease the quality of the deduced information. Solving this problematic is what we call in this article "Ensuring the Quality of Information Service (QoIS)". This document provides a state-of-the-art for the QoIS regarding WSNs. At first, we give a quick overview of the Internet of Things (IoT) paradigm and the WSN technologies in order to understand how data is gathered and used in these networks. Also, we introduce a novel concept: QoIS, in contrast with classic QoS. Then, it is expected a summary of criteria that asses the QoIS in WSNs plus some techniques to improve it. In this article, we will focus on data management techniques. These techniques can improve raw data, information and/or knowledge quality in energy-constrained WSNs. Finally, we give some conclusions and a glimpse about our future work.

A hybrid fuzzy MADM method is proposed in this paper for evaluating airline service quality. Fuzzy set theory is used since it helps in measuring the ambiguity of concepts associated with human being’s subjective judgment. After reviewing service quality evaluation models especially in airline industry, SSQAI model was adopted as a construct for evaluating airline service quality in Iran. Fuzzy DEMATEL was applied to determine the degree of influence and impact of criteria on each other and extract cause and effect relations between them that helped in ranking criteria based on degree of relationship. Then, ANP network map was constructed based on the relation map generated from Fuzzy DEMATEL analysis. Fuzzy ANP approach assisted in prioritizing criteria based on the need for improvement and enabled in a more accurate measurement in decision making process taking the advantage of using linguistic variables. Fuzzy DEMATEL results demonstrates that expertise, Problem-solving, and conduct has the most influence on other factors and in opposite Valence, Waiting Time, Comfort are the factors which get the most impact from other factors and according to Fuzzy ANP analysis Valence, Convenience, Problem-solving, and Safety&Security are the factors with most priorities that need improvement.

In the foodservice industry, clients judge not only the product standard but also the service quality they receive during their restaurant experience. Therefore, when the importance of the dining experience is strongly regarded by consumers in terms of intellectual and motivational attributes, they are happier to suggest the establishment to others. The main objective of this research is to study the influence of different service quality factors in restaurants and their impact on customer satisfaction. This research is also undertaken to evaluate the identification of important factors for the restaurant industry and the levels of service quality among customers satisfaction with the services offered by restaurants in India. As factor analysis, correlation, and regression research, this study was conducted using a modified IBM SPSS Statistics 24 and AMOS instrument among the 630 randomly selected customers. A weighted mean was used to describe the levels of service quality and customer satisfaction. Multiple regressions were used to determine the predictors of customer satisfaction. The results reveal the main 12 service quality factors, which are: 1. Process-related factors: system for take-away orders, order tracking system, and time for food preparation 2. People-related factors: focus on customers' special requests, peer group influence, and making you feel special. 3. Physical Environment: Walking Space, Architecture of the Restaurant, and Signals for Direction 4. Performance-related factors: food served at an appropriate temperature; food presentation; portion size of food in the restaurant. The researchers have developed one model on service quality factors that is described in the research paper.

Transportation electrification has been identified as a crucial shift to be made for achieving energy security and emission reduction targets. Electric Vehicles (EVs) play a significant role in achieving these targets; therefore, there is a growing trend to develop new EV technologies and associated infrastructure. Along with these developments, EVs' Quality of Service (QoS) aspects should be enhanced to increase the number of EVs on the road. Various QoS factors are defined to assess the QoS of EVs, and one of the two aims of this paper is to provide a comprehensive review of these factors. The other aim is to review recent developments of associated communication technologies which are essential for exchanging information between EVs and charging stations. This paper serves as a comprehensive review and useful reference for researchers working on QoS aspects of EVs and associated communication systems aiming to enhance the QoS.

Introduction : In today’s competitive business landscape, organizations strive to maintain a highly committed workforce to enhance productivity, reduce turnover, and achieve long-term success. Organizational commitment, defined as the psychological attachment of employees to their organization, is crucial in fostering employee loyalty and engagement (Meyer & Allen, 1991). However, identifying the factors that influence organizational commitment requires a deep understanding of employee attitudes and behaviors.

Bus services play a significant role as the main public transportation, especially in urban areas throughout the years. Since bus services compete greatly with other types of public transportation, such as e-hailing service and private vehicles, they have recently attracted scholars to conduct many relevant studies. However, most past research studies in the Asian region were not focused on engineering, social science, and Internet of Things (IOT). This present study concentrated on the service quality of bus services in Asia by using systematic literature review of articles. This study conducted a review based on previous studies, specifically on the service quality of performance. Several previous studies were selected by using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRIMSA) approach. SCOPUS and Science Direct were chosen as the main journal database. By using this method, 41 articles were selected for further analysis. This study was merely focused on three primary themes, such as study approach, stakeholder, and service quality attributes. Advanced analysis on these primary themes was used to formulate another 18 sub-themes. All themes and sub-themes which reflected the significant impacts of service quality towards bus services were discussed in detail. This study had addressed several qualities of bus services of bus performance towards improvement of urban transportation polices. Lastly, several recommendations that could provide necessary knowledge and information for future research were presented.

The main objective of this study is to apply structural equation modeling with partial least squares and based on covariance to assess the satisfaction of residential electricity consumers. The methodology used compares the results of both structural equation models to indicate the model that best fits the problem of measuring the satisfaction of residential consumers of electricity concessionaires and licensees. The sample used in the survey contained questionnaire responses from 86.175 individuals considering the period from 2014 to 2018. The constructs evaluated were satisfaction, quality, value, loyalty, and trust. Confidence interval analysis shows that all weights are significant, demonstrating the importance of all the indicators that represent the constructs. The trust, quality, and value constructs can explain 74.4% of the variability of the satisfaction construct, so the explanatory capacity of this relationship is considered substantial. Finally, the evaluation of the performance of the service provided by the electric energy concessionaires/licensees, measured by customer satisfaction, allows for the continuous improvement of services and meeting, even if minimally, the expectations of its consumers.

This research analyzed the impact of quality of service as perceived by Hapkido students on their exercise continuation and recommendation intentions. It also identified the measures to reduce the rate of student dropout, strengthen competitiveness, and create more efficient marketing strategies for consumer patterns that are rapidly diversifying Hapkido. A questionnaire survey method was conducted with 300 middle and high school students aged 14–19 years having Hapkido training of three months to two years in Incheon and Bucheon during March–April 2019. Frequency, factor, reliability, correlation, and standard multiple regression analyses were conducted on the surveyed data. The conclusions are as follows. First, considering the impact of service quality on exercise continuation intention, service quality positively affects reliability, personification, and perceptual openness; in terms of possibility, it positively affects typicality, personification, and perceptual openness; and in terms of reinforcement, it positively affects reliability and perceptual openness. Second, examining the impact of service quality on recommendation intention positively affects reliability, personification, and perceptual openness. Third, exercise continuation intention positively affects recommendation intention.

Quality control (QC) may be a lengthy and tedious process. As a result, most data users use data from meteorological services without performing data quality checks. The South African Weather Service (SAWS) re-established the national solar radiometric network comprising of 13 new stations within the six climatic zones of the country. This study reports on the performance results of the Baseline Surface Radiation Network (BSRN) QC procedures applied to the solar radiation data within the SAWS radiometric network. The overall percentage performance of the SAWS solar radiation network based on BSRN QC methodology is 97.79%, 93.64%, 91.6% and 92.23% for Long Wave Downward Irradiance (LWD), Global Horizontal Irradiance (GHI), Diffuse Horizontal Irradiance (DHI) and Direct Normal Irradiance (DNI) respectively with operational problems largely dominating the percentage of bad data. The overall average performance of the Surface Solar Radiation Dataset – Heliosat (SARAH) data records for the GHI estimation for all the stations showed a Mean Bias Deviation (MBD) of -8.28 Wm^-2, a Mean Absolute Deviation (MAD) of 9.06 Wm^-2 and the Root Mean Square Deviation (RMSD) of 11.02 Wm^-2. The correlation (quantified by R²) between ground-based and SARAH-derived GHI time series was ~ 0.98. The established network has the potential of providing high quality minute solar radiation data sets (GHI, DHI, DNI and LWD) and auxiliary hourly meteorological parameters vital for scientific and practical applications in renewable energy technologies in South Africa.

The purposes of this study are to introduce the concept of Service Quality (SQ) in E-Supply Chain Management (E-SCM) and its impact on increasing Customer Satisfaction (CS) and provide insightful enhancements to the literature. In addition, the paper also examines the influence of SQ of E-SCM on CS in online shopping. After a comprehensive literature review, four key factors for measuring the E-Supply Chain (Process Control, Interaction with Supplier, Management Support, and Focus on Customers), four key factors for measuring CS (Informing Customers, Attention to Customers’ Needs, Staff Performance Accuracy, and Easy Access to Services), and four factors for measuring the quality of identification services (Assurance, Accountability, Tangibility and Reliability) were selected. The proposed conceptual model was then presented. This model was validated by data collected through a survey of 150 respondents in order to identify customer satisfaction, including that of customers of online websites in Iran. The sample data was analyzed using SPSS21, after which the interrelationships between the model and factors were examined based on the Partial Least Square-Structural (PLS). Model fit indices were then calculated for the dataset. The proposed model was validated using factor analysis and structural equation modeling techniques. The results indicated that E-SCM has a direct impact on CS. The effect of SQ was also confirmed. A positive and significant relationship was identified between E-SCM and CS, E-SCM and SQ, as well as SQ and CS (P> 0.05). The first limitation was to convince respondents to cooperate with the researchers. The second one was the lack of research-related background due to the subject being relatively new. This study, to the best of the authors’ knowledge, is the first empirical analysis on the CS assessment of SQ of E-Supply Chain in online shopping. This important link to online shopping has rarely been explored. It is expected that by filling this gap, this study will help in strengthening online shopping, which needs a change in the marketing area.

This purpose of the study presented in this article is to comparing different service quality measurements between Kano and TRIZ that plays the critical roles in the catering industrial. Data collected from a DINESERV questionnaire comprises service-quality standards to increase customer satisfaction of mobile dining car. Finally, the TRIZ is standardized measure designed to improve the idealization of strategy for selecting the most appropriate service quality model. In addition, the preferences of more than one decision maker are internally aggregated into the TOPSIS procedure. All these things provide several important theoretical and practical implications for developing a successful mobile catering app.

Quinoa is a resilient crop known for its adaptability to diverse environmental conditions. This study examined the agronomic performance and ecological adaptability of quinoa across four distinct altitudes in the northwestern regions of China. Six quinoa genotypes were assessed for agronomic traits, phenology and yield performances, and nutritional quality characteristics in Yining city, Nilka County, Tekes County and Zhaosu County under varied environmental conditions. Our findings demonstrate significant variations in all measured traits including agronomic and nutritional quality traits across the various altitudes and genotypes. In Yining City, a warmer and lower altitude area, genotypes exhibit superior traits for fodder production, including increased branches, longer panicles, robust stems, and high seed protein content. Genotypes Jinli 1 and Beijing 2 achieve yields exceeding 3 tons per hectare (T/ha), highlighting the region’s productivity. Nilka and Tekes counties boasted the shortest quinoa crop cycles, with Jinli 1 yielding 4.05 T/ha seeds in Tekes County, exhibiting high protein and fat content alongside low saponins, making it prime location for yield production. Zhaosu County, with its cooler climate and fertile chernozem soil, elicited high 1000 seed weight and more robust protein response than Nilka and Tekes counties, illustrating the impact of soil fertility on nutritional composition. Correlation analyses further elucidated that the plants characterized by shorter flowering times, crop cycles, compact inflorescence, and taller heights exhibited superior seed yields. Our study contributes significant insights into the ecological adaptability and nutritional dynamics of quinoa, with implications for sustainable crop production and food security in diverse agroecosystems.

Cloud Manufacturing (CMfg) has attracted lots of attention from scholars and practitioners. The purpose of quality of service (QoS)-aware manufacturing cloud service composition (MCSC), as one of the key issues in CMfg, is to combine different available manufacturing cloud services(MCSs) to generate an optimized MCSC that can meet diverse requirements of customers. However, many available MCS, deployed in the CMfg platform, have same function but different QoS attributes. It is a great challenge to achieve optimal MCSC with high QoS. In order to obtain better optimization results efficiently for the QoS-MCSC problems, a whale optimization algorithm(WOA) with adaptive weight, Lévy flight, and adaptive crossover strategies (ASWOA) is proposed. In the proposed ASWOA, the adaptive crossover inspired by the genetic algorithm is developed to balance the exploration and exploitation. The Lévy flight is designed to expand the search space of WOA and accelerate the convergence of WOA with adaptive crossover. The adaptive weight is developed to extend the search scale of the exploitation. Simulation and comparison experiments are conducted on different scale QoS-MCSC problems. The experimental results demonstrate that the proposed ASWOA outperforms other compared cutting-edge algorithms.

This study investigates the evolving corporate governance mechanisms within the context of an emerging economy. Addressing a literature gap, we analyse the influence of corporate governance and earnings quality on idiosyncratic risk in an emerging economy. In particular, this research explores the impact of corporate governance practices and earnings quality on idiosyncratic risk. For this purpose, we utilise a sample of 75 non-financial firms listed on the Pakistani equity market over nine years from 2010 to 2018. Employing the generalised method of moments, the findings of our empirical analysis reveal that firms with robust governance mechanisms and higher earnings quality experience minimal idiosyncratic risk. These outcomes provide valuable insights for standard setters, regulatory authorities, policymakers, and other stakeholders, emphasising the importance of governance mechanisms and earnings management in mitigating idiosyncratic return volatility.

This paper focuses on evaluating airline service quality from the perspective of passengers view. Until now a lot of researches has performed in airline service quality evaluation in the world but a little research has been conducted in Iran, yet. In this research a framework for measuring airline service quality in Iran is proposed. After reviewing airline service quality criteria, SSQAI model was selected because of its comprehensiveness in covering airline service quality dimensions. SSQAI questionnaire items were redesigned to adopt with Iranian airlines requirements and environmental circumstances in the Iran's economic and cultural context. This study includes fuzzy decision-making theory, considering the possible fuzzy subjective judgment of the evaluators during airline service quality evaluation. Fuzzy TOPSIS have been applied for ranking airlines service quality performances. Three major Iranian airlines which have the most passenger transfer volumes in domestic and foreign flights, were chosen for evaluation in this research. Results demonstrated Mahan airline has got the best service quality performance rank in gaining passengers' satisfaction with delivery of high quality services to its passengers, among the three major Iranian airlines. IranAir and Aseman airlines placed in the second and third rank, respectively, according to passenger's evaluation.Statistical analysis have been used in analyzing passenger responses. Due to abnormality of data, Non-parametric tests were applied. To demonstrate airline ranks in every criterion separately, Friedman test was performed. Variance analysis and Tukey test were applied to study the influence of increasing in age and educational level of passengers' on degree of their satisfaction from airline's service quality. Results showed that age has not significant relation with passenger satisfaction of airlines, however increasing in educational level demonstrated a negative impact on passengers' satisfaction from airline's service quality.

The study aimed to know the direct effect of strategic leadership on the quality of service represented by wireless communications services, in addition to knowing the indirect effect of strategic leadership on the quality of service when using performance as an intermediary variable. This research was conducted in government institutions in the Republic of Yemen. Represented by the offices of the Ministry of Communications and Information Technology in five Yemeni cities, it targeted senior management employees, boards of directors, and middle management concerned with strategic planning and strategic leadership. To measure and evaluate the factors of strategic leadership and service quality in Offices of the Yemeni Ministry of Communications Ministry of Communications and Information Technology of the Republic of Yemen. Moreover, performance. A questionnaire was formulated and distributed to the study sample, and data was collected through questionnaires for 150 individuals in some offices of the Yemeni Ministry of Communications. This study uses structural equation model analysis from the Partial Least Squares program through the Smart Plus 4 programs. The study reached a set of results, including that all models show a direct, positive and significant effect of strategic leadership on the quality of service represented by the quality of services in the offices of the Ministry of Communications. As well as the positive relationship between them, as well as the direct and positive impact of performance on the quality of service, as well as the positive and significant relationship between them. While the results indicated a positive and significant indirect effect of strategic leadership on service quality, there is also a positive and significant indirect relationship between strategic leadership on service quality when using performance as an intermediary variable.

Groundwater represents a pivotal asset in conserving natural water reservoirs for potable consumption, irrigation, and diverse industrial uses. Nevertheless, human activities intertwined with industry and agriculture contribute significantly to groundwater contamination, highlighting the critical necessity to appraise water quality for safe drinking and effective irrigation. This research primarily focused on employing the Water Quality Index (WQI) to gauge water's appropriateness for these purposes. However, the generation of an accurate WQI can prove time-intensive owing to potential errors in sub-index calculations. In response to this challenge, an artificial intelligence (AI) forecasting model was devised, aiming to streamline the process while mitigating errors. The study collected 422 data samples from Mirpurkash, a city nestled in the province of Sindh, for a comprehensive exploration of the region's WQI attributes. Furthermore, the study probed into unraveling the interdependencies amidst variables in the physiochemical analysis of water. Diverse machine learning classifiers were employed for WQI prediction, with findings revealing that random forest and gradient boosting eclipsed other algorithms, achieving an accuracy rate of 99%. In close pursuit were SVM and XGBoost, registering accuracy scores of approximately 95% and 93%, respectively, while KNN and Decision Trees garnered accuracy rates of 88% and 87%, respectively. In addition to WQI prediction, the study conducted an uncertainty analysis of the models using the R-factor, providing insights into the reliability and consistency of predictions. This dual approach, combining accurate WQI prediction with uncertainty assessment, contributes to a more comprehensive understanding of water quality in Mirpurkash and enhances the reliability of decision-making processes related to groundwater utilization

Air pollution knows no boundaries, which means for a city or a region to attain clean air standards, must not only look at the emission sources within its own administrative boundary, but also at sources in the immediate vicinity and those originating from long-range transport. And there is a limit to how much area can be explored to evaluate, govern, and manage as designated airsheds for cities and larger regions. This paper discusses the need from an official airshed framework for India’s air quality management, urban airsheds designated for India’s 131 non-attainment cities under the national clean air programme, and proposes climatically and geographically appropriate regional airsheds to support long-term planning. Between 28 states, eight union territories, 36 meteorological sub-regional divisions, and six regional meteorological departments, establishing the proposed 15 regional airsheds for integrated and collaborative air quality management across India is a unique opportunity.

Multi-criteria decision analysis (MCDA), one of the prevalent branches of operations research, aims to design mathematical and computational tools for selecting the best alternative among several choices with respect to specific criteria. In the cloud, MCDA based online brokers uses customer specified criteria to rank different service providers. However, subjected to limited domain knowledge, the customer may exclude relevant or include irrelevant criterion, which could result in suboptimal ranking of service providers. To deal with such misspecification, this research proposes a model, which uses notion of factor analysis from the domain of unsupervised machine learning. The model is evaluated using two quality-of-service (QoS) based datasets. The first dataset i.e., feedback from customers, was compiled using leading review websites such as Cloud Hosting Reviews, Best Cloud Computing Providers, and Cloud Storage Reviews and Ratings. The second dataset i.e., feedback from servers, was generated from cloud brokerage architecture that was emulated using high performance computing (HPC) cluster at University of Luxembourg (HPC @ Uni.lu). The simulation runs in a stable cloud environment i.e. when uncertainty is low, shows that online broker (equipped with the proposed model) produces optimized ranking of service providers as compared to other brokers. This is due the fact that proposed model assigns priorities to criteria objectively (using machine learning) rather than using priorities based on subjective judgments of the customer. This research will benefit potential cloud customers that view insufficient domain knowledge as a limiting factor for acquisition of web services in the cloud.

This research addresses a gap in the literature by conducting a comprehensive analysis of patients’ level of satisfaction with dental care. Methods: By combining quantitative and qualitative survey methods with the PSQ questionnaire this study aims to augment ongoing initiatives to enhance dental patients’ experiences by painting a more comprehensive depiction of patients' level of satisfaction; Results: When asked about their overall level of satisfaction 77,1% of the patients said they received excellent services from the office personnel and 72,2% said they trust their doctors; Conclusions: Assessing patient satisfaction in the realm of dental services quality is crucial for enhancing service quality and accuracy, benefiting both patients and dentists, and ultimately improving public health.

In recent years, the High Dynamic Range (HDR) image has gained widespread popularity 1 across various domains such as security, multimedia, and biomedical fields, owing to its ability 2 to deliver an authentic visual experience. However, the extensive dynamic range and rich detail 3 in HDR images present challenges in assessing their quality. Therefore, current efforts involve 4 constructing subjective databases and proposing objective quality assessment metrics to achieve 5 efficient HDR Image Quality Assessment (IQA). Recognizing the absence of a systematic overview 6 of these approaches, this paper provides a comprehensive survey of existing HDR IQA methods. 7 Furthermore, this paper aims to serve as a valuable resource for researchers by discussing the 8 limitations of current methodologies and potential research directions in the future.

Aiming at the problem of low pollutant concentration in the sewage treatment plant due to external water intrusion into the sewage collection system, which in turn leads to low pollutant reduction efficiency. A sewage system in Zhenjiang City is taken as an example. Analyze the situation of external water intrusion in the sewage pipe network, and determine the external water intrusion proportion based on the water quality and quantity method. First, the dry season flow rate of the sewage pipe is obtained according to the monitoring data of the flowmeter. Then, the key research areas are screened out based on the changes in the concentration of water quality characteristic factors. Furthermore, chemical oxygen demand and electrical conductivity are used as the water quality characteristic indicators to characterize shallow groundwater and river water. In addition, the proportions of groundwater and river water intrusion in the sewage pipe network are quantitatively analyzed based on the chemical mass balance equation. At the same time, the dredging detection method is used to assist in the investigation, and finally the engineering rectification of the problems found in the drainage is carried out. The results show that the water quality and quantity method can effectively identify the types of external water and analyze the proportion of external water intrusion, which is of exemplary significance for the evaluation of sewage collection systems.

Adults’ with Intellectual Disabilities (ID) experiences on occupational participation were explored through the prism of Occupational Justice model (MOJ) aiming to shape and develop an occupation-centered model of Quality of Life (QoL). In this qualitative study participated thirteen adults with ID (N=13). A semi-structured interview based on MOJ was constructed and administered to explore perspectives on QoL, as well as injustices regarding occupational participation. The interviews were processed with QSR NVivo8 following content analysis research methodology. An Occupational – Quality of Life (O-QoL) model with an everyday occupations core component has been formed. This model includes three core O-QoL domains: (i) social well-being, (ii) emotional – physical well-being and (iii) material adequacy. Main indicators of O-QoL were the recreational occupations and social activities, while socio-environmental factors such as occupational deprivation have been identified as aggravating. In addition, specific occupations such as leisure activities, physical exercise / sports, art, video games and vocational training could also be beneficial for O-QoL. Moreover, the importance of promoting and supporting the rights of people with ID for employment, independent living and sexual expression was highlighted. The O-QoL could be a valuable conceptual framework in the field of ID, however further research for developing specialized assessment tools and Occupational Therapy interventions to promote O-QoL is needed.

A method based on ultra performance liquid chromatography with diode array detector (UPLC-DAD) was developed for quantitative analysis of five active compounds and chemical fingerprint analysis of Rosa rugosa. Ten batches of Rosa rugosa collected from different plantations in the Xinjiang region of China were used to establish the fingerprint. The feasibility and advantages of the used UPLC fingerprint were verified for its similarity evaluation by systematically comparing chromatograms with professional analytical software recommended by State Food and Drug Administration (SFDA) of China. In quantitative analysis, the five compounds showed good regression (R²=0.999 5) within the test ranges and the recovery of the method was in the range of 94.2–103.8%. The similarities of the fingerprints of 10 batches of the samples were more than 0.981. The developed UPLC fingerprint method is simple, reliable and validated for the quality control and identification of Rosa rugosa. Additionally, simultaneous quantification of five major bioactive ingredients in the Rosa rugosa samples was conducted to interpret the consistency of the quality test. The results indicated that the UPLC fingerprint as a characteristic distinguishing method combining similarity evaluation and quantification analysis, can be successfully used to assess the quality and to identify the authenticity of Rosa rugosa.

Energy from biogas is one of the most promising renewable energy sources. Significant, for technical, economic, and environmental reasons, is the construction of agricultural microgas plants next to households specialising in cattle rearing. The availability of free substrate makes it possible not only to produce one's electricity and heat but also to produce a more environmentally and human-friendly manure. The operation of biogas plants is, unfortunately, associated with technical problems. This paper presents the results of a study of the quality of electricity generated in an agricultural biogas plant built at a farm specialising in dairy cows, where the owner reported a problem with the voltage in the power supply network. Therefore, selected power quality parameters occurring at the connection point of the biogas plant were analysed in detail. As the authors' research showed, in the case in question, the agricultural biogas plant was connected via a cable with too small a conductor cross-section, which resulted in significant voltage exceedances, making it impossible to switch on the second of the biogas plant's generators. Replacement of the feed-in cable has enabled both generators to run, but significant fluctuations in the feed-in voltage values were still noticeable. Analysis of the subsequent measurements revealed the need for changes in the design of the digester itself. The proposal for change is to replace the two current digester mixers (each rated at 9 kW) with more mixers of lower power. The new mixers would operate in an alternating system, where only one would always be activated.

In light of growing concerns over water contamination, particularly in regions like Sindh, Pakistan, this research aimed to evaluate and map the groundwater quality in Taluka Larkana for both drinking and irrigation applications, addressing the expressed worries of the local community. A total of forty groundwater samples were collected from various sources such as hand pumps, taps, and tube wells. These samples underwent comprehensive analysis encompassing parameters including color, odor, taste, turbidity, pH, total hardness (TH), electrical conductivity (EC), and total dissolved solids (TDS), with comparisons drawn against WHO guidelines.Results indicated that taste, color, odor, and turbidity of the groundwater samples generally fell within acceptable ranges. However, EC levels varied from moderately elevated to excessively high. Notably, a significant proportion of samples (84% EC, 21% Cl, 30% Ca, 37% Mg, 22% TH, and 84% TDS) exceeded WHO-recommended thresholds.Assessment via the SPI model classified approximately 16% of samples as moderately contaminated, while 65% were deemed highly contaminated, and 19% were found unsuitable for drinking purposes. These findings underscore the pressing need for concerted efforts to address water quality issues in the region.

Software stands as one of the most rapidly evolving technologies in the present era, characterized by its swift expansion in both scale and complexity which leads to challenges in quality assurance. Software Defect Prediction (SDP) emerges as a methodology crafted to anticipate undiscovered defects, leveraging known defect data from existing codes. This methodology serves to facilitate software quality management, thereby ensuring overall product quality. Machine Learning (ML) and Deep Learning (DL) methodologies exhibit superior accuracy and adaptability compared to traditional statistical approaches catalyzing active researches in this domain. However, it makes us hard to generalize not only because of the disparity between open-source project and commercial project but also the difference on each industrial sectors. Consequently, further research utilizing datasets sourced from diverse real-world sectors becomes imperative to bolster the applicability of these findings. In this study, we utilized embedded software for telecommunication systems of SAMSUNG ELECTRONICS, supplemented by the introduction of nine novel features to train the model, and subsequent analysis of results ensued. Experimental outcomes revealed that the F-measurement metric has been enhanced from 0.58 to 0.63 upon integration of the new features, thereby signifying a performance augmentation of 8.62%. This case study is anticipated to contribute to bolster the application of SDP methodologies within analogous industrial sectors.

This study delves into hospital mobility, understood as an indicator of perceived service quality, across the Italian regions of Apulia and Emilia Romagna, utilizing logistic regression among machine learning techniques. The focus is on how structural, operational, and clinical variables impact patient perceptions of service quality, influencing their healthcare choices. Through the analysis of mobility trends with machine learning, significant differences between regions were uncovered, highlighting the influence of regional context on perceived quality. The integration of SHAP (SHapley Additive exPlanations) values into our analysis provided deeper insights into the logistic regression model, elucidating the specific contribution of each variable to perceived healthcare quality. This incorporation of SHAP values underscores the study's commitment to employing advanced, explainable AI techniques to enhance the interpretability and fairness of healthcare service evaluations. The choice of logistic regression elucidated the impact of specific variables on quality perception, offering essential insights for optimizing healthcare resource distribution and underscoring the importance of data-driven strategies to foster more equitable, efficient, and patient-centred healthcare systems. Contributing to the understanding of perceived quality dynamics within the healthcare context, the research paves the way for further investigations into enhancing accessibility and service quality, leveraging machine learning as a tool for improving healthcare services efficiency in diverse regional settings.

This review explores the combination of renewable energy production and agriculture through agrivoltaic, with a focus on its impact on fruit crops. As the world seeks alternatives to fossil fuels, agrivoltaics offers a promising solution by integrating solar panels with farming practices. The study examines various agrivoltaic configurations with different fruit crops, emphasizing their influence on microclimatic conditions beneath the panels and the effects on crop produc-tion. In particular, it underscores the need for tailored solutions to balance energy yield and crop productivity and quality, with different shading levels affecting fruit quality/production. De-spite ongoing research, a comprehensive understanding of agrivoltaics' potential benefits and challenges remains crucial for its successful application and implementation in sustainable ag-riculture.

One of the goals of modern orcharding is to have a high production of fruits that are uniform in size, organoleptic parameters, and health characteristics. The aim of the work was to study the assortment of different shoot types and their prevailing position along the cane and how shoot type can contribute to on shoot type on fruit quality in Actinidia tree. The experiment was carried out over two years in a commercial orchard of Actinidia chinensis, cv Gold 3. Along the cane, the shoots were classified as Spur shoot (SP), terminate shoot (TE), no terminate shoot (NT), and cut no terminate shoot (CNT). The data were statistically processed using ANOVA and Principal Component Analysis (ACP). Four different fruit categories were obtained from to the four shoot type to compared: a prevailing category (55% of total fruits), which is characterised by its higher soluble solids content, sweetness, and excellent health characteristics, but with a lower hardness of the pulp, which would lead to the hypothesis that harvesting could be brought forward; a second category of fruit (19% of total fruit) with the lowest soluble solids content, but a high antioxidant capacity detached from CNT shoot; another category of fruit (13% of total fruit) produced from NT shoots, with the lowest health value, but good sweetness perception; finally the category with the lowest fruit percentage over total fruit harvested (10%) from SP shoots, characterised by its smaller size. It is to be verified what the performance of each category will be after post-harvest to speculate whether it is possible to differentiate the product at harvest into quality categories or possibly to differentiate the harvest time.

The ambient air quality data for particulate matter as well as criteria of gaseous pollutants were assembled during December 2013 to December 2015 from the Continuous Air Quality Monitoring Station (CAMS) located at Agrabad, Chittagong. The observation showed that during April- October, 24 hour average concentration of PM10 and PM2.5 were within the National Ambient Air Quality Standard (NAAQS) level but it increased occasionally by more than two and a half times during the whole non-monsoon period (November-March). The highest values found of PM2.5 were 321.1 µg/m³ in January, 2013 and 220.34 µg/m³ in December 2015. Whether, the highest alarming concentration of PM10 was reported as 474 µg/m3 in January 2007. The other gaseous pollutants such as SO₂, NO₂, O₃, CO and Hydrocarbons remain well within the permissible limit except dry non-monsoon period. The yearly average increase of Air Quality Index (AQI) value indicates the growth rate of air pollution in Chittagong city. The main responsible pollutant for air pollution is found PM_2.5.

The digital transformation in Industry 4.0 has revolutionized quality control paradigms, integrating advanced technologies such as augmented reality, deep learning, and computer vision systems into a new era called "Quality 4.0". This study systematically reviews how these technologies are shaping new practices in continuous quality supervision and improvement, adapting to increasingly automated and connected production environments. Through a comprehensive analysis of the literature, practical applications in various industrial sectors, from manufacturing and agriculture to the production of sweets and snacks, are highlighted. Additionally, the conceptual and detailed design of a quality control system using artificial intelligence tools is presented, focusing on the inspection of dimensions, color, weight, and labeling of MDF boxes. The proposed system demonstrates an effective integration of sensors, high-definition cameras, and deep learning algorithms, validated through tests with boxes of different sizes. The results suggest that the adoption of these technologies not only improves the accuracy and efficiency of inspections but is also essential to maintaining high-quality standards in a dynamic and competitive industrial environment.

Interrelationships between traditional dental variables are becoming more evident in far reaching aspects of life such as psychosocial interaction, self-esteem, overall health and even occupational performance. This study compares quality of life (QoL) in postmenopausal women (PMW) with poor oral health (POH) with QoL in PMW with good oral health. 200 randomly recruited PMW received a dental evaluation and completed Utian Quality of Life Survey. The participants were divided into POH and healthy groups based on dental exam. Mean scores were calculated for each QoL item, domain and the overall summary score. For each of the four parameters for periodontitis diagnosis, periodontitis patients’ QoL outcomes were compared to those of healthy patients using T-test with threshold of significance at p<0.05. QoL in all fields measured were significantly poorer in the POH compared to the healthy patients, occupational (19.95±5.35vs. 27.56±6.13), health (18.02±8.23 vs. 26.59 ±6.45), emotional (15.68±10.22vs. 21.15±9.15), sexual (6.2±5.98vs. 10.02±5.35), and total score (60.21±25.85 vs. 84.26±22.35). This study finds that PMW with POH, report significantly poorer quality of life. Clinicians caring for PMW should be aware of that oral health impacts QoL and make appropriate referral decisions for patients’ dental care. Keywords: Quality of Life, Oral Health, Post-menopause, Women

Abstract: Patients with Cleft Lip Palate (CLP) require comprehensive treatment, so the people who take care of them must constantly provide care and support, along with continuous care and support from their caregivers, often extending until youth. The purpose was to compare the Quality of Life (QoL) of caregivers of children with CLP with those without the condition. A cross-sectional paired study was conducted at the Dental Clinic of the Escuela Nacional de Estudios Superiores (ENES León), National Autonomous University of Mexico (UNAM), from May to December 2021. Primary caregivers of patients with CLP (n=70) were included as well as those of the patients without CLP (n=70) of the same institution. Sample size was calculated considering an OR=2.5, establishing a convenience selection. Caregivers answered the WHOQoL Bref instrument to assess QoL. Of the total sample analyzed, 88.6% of the caregivers were female (p>0.05). Caregivers of patients with CLP reported poor QoL (64.8%), compared to caregivers in the control group (p

The relationship between perception of anxiety and quality of life in caregivers of children with autism was verified. To verify quality of life, the Short Form Healthy Survey Item was used; perception of anxiety was assessed using the Beck Anxiety Inventory. 80 caregivers of children with autism participated, with 68.7% of caregivers being mothers. Of the total number of caregivers, 68.8% had a severe level of anxiety. Regarding quality of life, they demonstrated greater impairment in Limitation due to physical aspects, Limitation due to emotional aspects, Vitality and Pain. Caregivers with severe anxiety levels had worse quality of life in the domains of pain (p = 0.012), social aspects (p =&lt; 0.001), limitation due to emotional aspects (p = 0.001) and mental health (p =&lt; 0.001). However, in the functional capacity domain, caregivers with a moderate level of anxiety had a better physical capacity score (p = 0.001). There was a negative correlation between the general anxiety score and the general physical (p = 0.029) and general emotional component of quality of life (p =&lt; 0.001). It was found that caregivers of children with ASD present losses related to psychological factors, quality of life and the lack of social support.

The purpose of this study is to analyse the drivers and outcomes of the brand love derived from consumption experiences in the automobile retail sector. We examine the effects of consumers’ perceptions of perceived service quality and the trust they feel towards a car dealership (cognition) on emotions and brand love (affection), and the effects of brand love on consumers´ behavioural intentions (conation). This research provides insights into customer brand love in the automobile industry.

This study aimed to evaluate the effectiveness of an intensive care unit (ICU) round checklist, FAST HUGS BID (Feeding, Analgesia, Sedation, Thromboembolic prophylaxis, Head-of-bed elevation, Ulcer prophylaxis, Glycemic control, Spontaneous breathing trial, Bowel regimen, Indwelling catheter removal, and De-escalation of antibiotics) in improving clinical outcomes for patients with severe trauma. Patients admitted to our trauma ICU between 2016 and 2020 were retrospectively analyzed. We divided the participants into two groups: before (before-FD, 2016-2017) and after (after-FD, 2019-2020) the checklist's implementation. We compared patient characteristics and clinical outcomes, including ICU and hospital length of stay (LOS) and in-hospital mortality. Survival analysis was performed using Kaplan–Meier curves and multivariable logistic regression models, and multiple linear regression analysis was used to identify independent factors associated with ICU and hospital LOS. Compared with the before-FD group, the after-FD group had significantly lower in-hospital mortality and complication rates, shorter ICU and hospital LOS, and reduced duration of mechanical ventilation. revealed that the checklist's implementation was a significant independent factor in reducing ICU and hospital LOS and in-hospital mortality. In this before/after study, we observed that the FAST HUGS BID checklist implementation was associated with decreased ICU and hospital LOS and in-hospital mortality.

Background Main treatment modality for spinal meningiomas (SM) is gross total resection (GTR). However, optimal timing of surgery, especially in cases with absent or mild neurological symptoms remains unclear. The aim of this study is to assess the impact of early-stage resection on neurological outcome, quality of life (QoL) and quality of care. The primary objective was a favorable neurological outcome (McCormick scale 1); Methods: We retrospectively analyzed data from patients operated on SM between 2011 and 2021. Patients with mild neurological symptoms preoperatively (McCormick scale 1 and 2) were compared to those with more severe neurological symptoms (McCormick scale 3-5). Disabilities and QoL were assessed according to validated questionnaires (SF36, ODI, NDI). Results: Age, spinal cord edema, thoracic localization, and spinal canal occupancy ratio were associated with more severe neurological symptoms (all p<.05). Patients presented with mild symptoms were associated with favorable neurological outcome (OR: 14.778 (95%CI 3.918-55.746, p<.001), which is associated with shorter hospitalization, better QoL and less disabilities (p<.05). Quality of care was comparable in both cohorts; Conclusions: Early surgical intervention of SM, before the development of severe neurological deficits, should be considered as it is associated with a favorable neurological outcome and quality of life.

Low Power Wide Area Networks (LPWAN) enable a growing number of Internet-of-Things (IoT) applications with large geographical coverage, low bit-rate, and long lifetime requirements. LoRa (Long Range) is a well-known LPWAN technology that uses a proprietary Chirp Spread Spectrum (CSS) physical layer, while the upper layers are defined by an open standard - LoRaWAN. In this paper, we propose a simple yet effective method to improve the Quality-of-Service (QoS) of LoRa networks by fine-tuning specific radio parameters. Through a Mixed Integer Linear Programming (MILP) problem formulation, we find optimal settings for the Spreading Factor (SF) and Carrier Frequency (CF) radio parameters, considering the network traffic specifications as a whole, to improve the Data Extraction Rate (DER) and to reduce the packet collision rate and the energy consumption in LoRa networks. The effectiveness of the optimization procedure is demonstrated by simulations, using LoRaSim for different network scales. In relation to the traditional LoRa radio parameter assignment policies, our solution leads to an average increase of 6% in DER, and a number of collisions 13 times smaller. In comparison to networks with dynamic radio parameter assignment policies, there is an increase of 5%, 2.8%, and 2% of DER, and a number of collisions 11, 7.8 and 2.5 times smaller than equal-distribution, Tiurlikova's (SoTa), and random distribution, respectively. Regarding the network energy consumption metric, the proposed optimization obtained an average consumption similar to Tiurlikova's, and 2.8 times lower than the equal-distribution and random dynamic allocation policies. Furthermore, we approach the practical aspects of how to implement and integrate the optimization mechanism proposed in LoRa, guaranteeing backward compatibility with the standard protocol.

Cerebral palsy (CP) presents challenges in movement and posture due to central nervous system damage, necessitating lifelong management. The COVID-19 pandemic has limited access to traditional treatments, increasing demand for home-based therapies and digital resources. This study analyzed the qualitative and quantitative aspects of YouTube videos focusing on CP therapy for children. In total, 95 videos were evaluated for content quality, therapeutic program efficacy, and popularity. Most videos were uploaded by health professionals. Neuromotor therapy types varied, with Bobath therapy being prominent. The quality assessments revealed moderate to high reliability in video content; nonetheless, shortcomings in addressing uncertainties were observed. Therapeutic programs often lack crucial details such as intensity and outcome assessment methods. No significant differences were found between professional and non-professional uploads. Classifiable videos based on exercise type, in contrast to the types of neuromotor therapy, exhibited better therapeutic quality than unclassified ones. Notably, video popularity did not correlate with quality. This study underscores the need for improved educational content on YouTube, particularly in providing comprehensive therapeutic information for CP management. Further refinement of evaluation tools is essential for assessing the rationale behind neuromotor therapeutic modalities for children with CP.

Background: Alarming data indicates that low back pain (LBP) affected around 619 million people globally in 2020, that presenting significant health and economic burden. Importantly, the chronic LBP (cLBP) strongly impairs quality of life and leads to disability and premature retirement thus emphasizing the urgent need for providing deeper insight into the factors that affect treatment outcomes and offer thorough guidance for the assessment and management of this disease. Taking into consideration the rising prevalence of cLBP and knowledge gap referring to the overall health benefits of balneotherapy (BT), the aim of this study was to assess the effects of BT on functional status, quality of life and psychological symptoms in patients with cLBP. Methods: A total 210 patients were recruited and divided into two groups: patients receiving conventional pharmacological therapy (CT) and receiving BT. The effectiveness of the treatment was assessed on the basis of Visual Analog Scale for pain intensity, EuroQol (EQ-5D) for the patient’s self-rated health and Work Ability Index Questionnaire to evaluate functional ability. In order to provide deeper insight into the quality of life and also factors associated with the functional status and mental health affected by BT, we also used the Short Form Health Survey Questionnaire and Center of Epidemiologic Studies Depression Scale. Results: Our findings suggest that BT significantly contributed to reduction of pain, better functionality and disability perception status. Conclusions: Understanding the association between individual perceptions of functionality, emotional and social elements provides basis for providing comprehensive guidelines and recommendations for cLBP management.

Orthodontic appliances may cause discomfort for patients. It could influence person‘s psychological well–being. The aim was to examine psychological health of patients wearing orthodontic appliances. It is important to analyze well-being of patients during orthodontic treatment because it is started in a young age and it may affect one’s psychological health. Therefore, for doctors and patients it is important to understand and take every aspect of the treatment into consideration when deciding when to start the treatment and what appliance to choose. 339 patients answered anonymous questionnaire. They were divided into four groups according to their age and type of appliance. Main reasons to seek treatment were crooked teeth and bad bite. Statistically signifi-cant difference was between women and men as women seeked treatment because of crooked teeth, meanwhile men indicated bad bite as main reason. 48.7% of subjects noted that they were feeling good during treatment, however, 4% of all patients noted that they were feeling bad. 45% of subjects stated that they felt unhappy at least sometimes. 43% of subjects felt stress. Even though patients indicated various negative aspects on their well-being during treatment, for the majority of the subjects end results significantly increased their psychological well-being.

In the contemporary accelerated pace of life, emphasizing the importance of sleep quality is essential for enhancing overall well-being and health. This study investigates the link between poor sleep quality and key factors affecting wellness, such as mental health and eating disorders. Through a cross-sectional analysis involving 407 participants, utilizing established measures including the Depression Anxiety Stress Scale (DASS-21), the Eating Disorder Examination Questionnaire Short (EDE-QS), and the single-item Sleep Quality Scale (SQS), data was collected and analyzed using SPSS v28 and R-Statistics. The findings reveal a significant correlation (p&lt;0.05) between DASS-21, EDE-QS, and SQS, indicating that individuals experiencing poor sleep quality exhibit higher levels of depression, anxiety, and stress. Furthermore, multinomial logistic regression analysis highlights low sleep quality as a risk factor for both mental health (OR: 1.071, 95% CI: 1.042, 1.102, p&lt;0.05, low vs. high sleep quality), and eating disorders (OR: 1.047, 95% CI: 1.004, 1.092, p&lt;0.05, low vs. high sleep quality). Overall, these results underscore the critical role of sleep quality in mental health and suggest insomnia as a predictive factor for both poor mental well-being and disordered eating habits. Further research through randomized controlled trials is warranted to validate the findings of this cross-sectional study.

This study investigates the anthropogenic activities, water quality, and ichthyofaunal diversity of the Navotas Riverine Ecosystem. It examines the anthropogenic influences, analyzes the physicochemical and microbiological properties of water, identifies fish species, evaluates the water quality index, and determines ichthyofaunal diversity using various indices. Water samples and fish collections were conducted from January to April 2024 at three sites. Key findings indicate that water quality parameters such as temperature (23.20-37.5°C), dissolved oxygen (6.22-7.84 mg/L), phosphate concentration (0.55-3.72 mg/L), and fecal coliform (350-160,000 MPN/100 mL) failed to meet DENR standards for Class C water. The TDS (1153.33-10700 ppm) and conductivity (17653.33-21333.33 µS/cm) were also elevated, indicating significant pollution. The study identified low ichthyofaunal diversity, with six native and one invasive fish species. A total of 269 fish were collected: 161 from Site 1, 46 from Site 2, and 62 from Site 3. The most abundant species was Scatophagus argus (19% occurrence), while the invasive Sarotherodon melanotheron ranked third (17% occurrence). Notably, pH (r = 0.753) correlated highly with nitrate concentration. S. melanotheron significantly correlated with pH (r = 0.602, p = 0.019) and nitrates (r = 0.555, p = 0.031). Lutjanus argentimaculatus also had significant correlations with pH (r = 0.527, p = 0.039) and nitrates (r = 0.651, p = 0.011). Conversely, S. argus had a negative moderate correlation with temperature (r = -0.529, p = 0.039) and conductivity (r = -0.536, p = 0.036). These correlations suggest that the water parameters significantly influence the diversity and abundance of fish in the river. The study concludes that the river's water quality is heavily influenced by anthropogenic activities which negatively affect ichthyofaunal diversity. Recommendations include continuous monitoring, gut and heavy metal analysis of fish, assessment of avifauna diversity, and strict implementation of conservation regulations.

Froth flotation, a widely used mineral beneficiation technique, generates substantial volumes of data, offering the opportunity to extract valuable insights from these data for production line analysis. The quality of flotation data is critical to designing accurate prediction models and process optimisation. Unfortunately, industrial flotation data are often compromised by quality issues such as outliers that can produce misleading or erroneous analytical results. A general approach is to preprocess the data by replacing or imputing outliers with data values that have no connection with the real state of the process. However, this does not resolve the effect of outliers, especially those that deviate from normal trends. Outliers often occur across multiple variables and their values may occur in normal observation ranges, making their detection challenging. An unresolved challenge in outlier detection is how far is far enough for an observation to be considered an outlier. Existing methods rely on domain experts’ knowledge which is difficult to apply when experts encounter large volumes of data with complex relationships. In this paper, we propose an approach to conduct outlier analysis on a flotation dataset. The approach uses a 2σ rule as the threshold to find quasi-outliers and multiple machine learning (ML) algorithms including k-Nearest Neighbour (kNN), Local Outlier Factor (LOF), and Isolation Forest (ISF) to identify true outliers. The approach then analyses the mutual coverage between quasi-outliers and outliers from the ML algorithms to identify the most effective outlier detection algorithm. We found that the outliers by kNN cover outliers of other methods. We use the experimental results to show that outliers affect model prediction accuracy and excluding outliers from training data can reduce the average prediction errors.

This paper investigates the relationship between public spaces and quality of life (QoL) for older adults, aiming to identify knowledge gaps within the context of population ageing and urbanization. Recognizing the growing importance of sustainable urban development, the research explores how cities can foster active ageing and improve QoL through accessible and inclusive public spaces. A scoping literature review identifies five key QoL domains for older adults: autonomy, meaningful activities, positive social relationships, leisure opportunities, and health. The review highlights areas requiring further investigation, including the interplay between environmental design and social connections, intergenerational perspectives on public space liveliness, the influence of context on QoL and the built environment, and the value of qualitative research in this field. By contributing to the understanding of QoL in relation to public spaces through the lens of Person-Environment fit theory, this study aims to inform urban design, landscape architecture, and policymaking in the creation of age-friendly communities with inclusive public spaces.

Green peppers (Capsicum annuum L.) is a fruit vegetable with great culinary versatility, and present important nutritional properties for human health. Water deficit negatively affects nutritional quality of green peppers fruits. This study aimed to investigate the influence of zinc oxide nanoparticles (ZnONPs), associated with plant growth-promoting bacteria (PGPB), on the post-harvest quality nutritional of green peppers subjected to water deficit. In an open-field ex-periment, two irrigation levels (50 and 100% of crop evapotranspiration - Etc), four treatments composed by combination of ZnONPs, zinc sulfate (ZnSO4) and PGPB (T1 = ZnSO4, T2 = foliar ZnONPs, T3 = foliar ZnONPs + PGPB, T4 = ZnSO4 via soil + PGPB via soil) and a control treatment (Check) were tested. Water deficit or water deficit mitigation treatments did not interfere with the physical-chemical parameters (except vitamin C content) and physical color parameters (except L*) of green pepper. The water deficit reduced the levels of Ca, Mg, P, K, Mn, Fe, B, and Zn in the fruits. The foliar application of ZnONPs in association with PGPB provided better nutritional quality of green pepper in terms of vitamin C and mineral nutrients. Under water deficit, ZnONPs or ZnSO4 via foliar, associated or not with PGPB, increased the levels of Ca, P, Mg, and Fe in the fruits. Applying Zn via foliar as ZnONPs or ZnSO4 mitigated the negative effects of water deficit on the quality of pepper fruits that was enhanced by the Bacillus subtilis and B. amyloliquefaciens inoculation.

In multi-objective optimization problems, the optimization target is to obtain a set of non-dominated solutions. Comparing solution sets is crucial in evaluating the performances of different optimization algorithms. The use of performance indicators is common in comparing those sets and, subsequently, optimization algorithms. A good solution set must be close to the Pareto-optimal front, well-distributed, maximally extended and fully filled. Therefore, an effective performance indicator must encompass these features as a whole and must be Pareto dominance compliant. Unfortunately, some of the known indicators often fail to properly reflect the quality of a solution set or cost a lot to compute. This paper demonstrates that the Degree of Approximation (DOA) quality indicator, is a weakly Pareto compliant unary indicator that gives a good estimation of the match between the approximated front and the Pareto-optimal front. Moreover, DOA computation is easy and fast.

This paper examines the impact of renewable energy heating on air quality in northern China, using the Qinling Mountains-Huaihe River line as a quasi-natural experiment to distinguish between regions with central heating and those without. Employing a difference-in-differences approach and analyzing panel data from 299 cities between 2014 and 2022, our findings indicate that the renewable energy heating policy has significantly improved air quality. Specifically, the policy led to substantial reductions in the Air Quality Index (AQI) and concentrations of key pollutants: SO2 by 28.31%, CO by 7.57%, NO2 by 5.72%, and PM2.5 by 7.15%. The policy's effects are most pronounced in regions with lower temperatures and in the eastern parts of the country. Further analysis emphasizes the critical role of energy transition, environmental regulations, and government investment in technology as key drivers of these air quality improvements.

The aim of this research work is to study the influence of temperature, solar irradiation and wind dust on the production of solar energy. In addition, it aims to study the assessment of water quality, in particular groundwater used for cooling and cleaning photovoltaic panels (quality analysis). it's an important source, stable and sustainable can be used entirely for cooling and cleaning PV modules from the sales dust, in order to improve their performance. To date, all research studies carried out in this context of cooling and cleaning using water have not taken account of the nature of this water. We have taken a sample of water from a well in a rural area in the Darra Tafilalet region of Morocco. This region has an arid and semi-arid climate, with very high temperatures and dust-laden winds, particularly in summer. These meteorological characteristics influence the efficiency of cells, particularly photovoltaic (PV) panels, reducing their performance. Next, the water sample was analysed in the laboratory. The results obtained show that the groundwater in this area is very sensitive to cooling and cleaning photovoltaic panels. Moreover, these results indicate that the temperature, solar irradiation and wind-blown dust have a significant influence on energy production.

Superior fiber quality is one of the most important objectives in cotton breeding. To detect the genetic basis underlying fiber quality, an F2 population containing 413 plants was constructed by crossing Jifeng 914 and Jifeng 173, both of which have superior fiber quality, with Jifeng 173 being better. Five fiber quality traits were investigated in the F2, F2:3, F2:4, and F2:5 populations. Quantitative trait loci (QTL) mapping was conducted based on a high-density genetic map containing 11,488 single nucleotide polymorphisms (SNPs) and spanning 4,202.12 cM in length. Transgressive segregation patterns and complex correlations in the five tested traits were observed. A total of 108 QTLs were found, including 27 for fiber length (FL), 16 for fiber strength (FS), 24 for micronaire (MC), 17 for fiber uniformity (FU), and 24 for fiber elongation rate (FE). Chromosome A7 contained 12 QTL, ranking the first. No QTL was found on chromosome D1 and D11. Each QTL contributed 1.98%–21.45% to the phenotypic variation (PV), including 13 major effect QTLs that contributed more than 10% toward PV. Two QTLs could be repeatedly detected in three populations, including qFL-D3-2 in F2, F2:4, and F2:5 with 9.18%–21.45% of PV, qFS-A11-1 in F2:3, F2:4 and F2:5 with 6.05%–10.41% of PV. Another seven stable QTLs could be detected in two populations, including four major effect QTLs: qFL-A12-3, qFS-D10-2, qMC-D6-2, and qMC-D8-1. Fourteen QTL-overlapping regions were found, which might explain the complex correlations among the five phenotypic traits. Four regions on chromosome A11, D3, D6, and D10 covered by both stable and major effect QTLs are promising for further fine mapping. The genomic regions of the two QTLs detected in three populations and the four major effect QTLs contain 810 genes. Gene functional analysis revealed that the annotated genes are mainly involved in protein binding and metabolic pathways. Fifteen candidate genes in the qFL-D3-2 region are highly expressed in fiber or ovules during fiber initiation, elongation, secondary cell wall thickening, or maturation stages. qRT-PCR revealed that Ghir_D03G005440.1 and Ghir_D03G011310.1 may play a role in promoting fiber initiation, Ghir_D03G006470.1 may be beneficial for promoting fiber elongation. This study provides more information for revealing the molecular genetic basis underlying cotton fiber quality.

In this study, we evaluated the physicochemical and microbial qualities of source and stored household waters in some communities in Southwestern Nigeria using standard methods. Compared parameters include physicochemical constituents; Temperature (T), pH, Total Dissolved Solids (TDS), Total Hardness (TH), Biological Oxygen Demand (BOD), Magnesium ion (Mg²⁺) and Calcium ion (Ca²⁺) and microbiological parameters included Total Coliform Counts (TC), Faecal Coliform Counts (FC), Fungal Counts (Fung C), Heterotrophic Plate Counts (HPC). Comparing Stored and Source samples, the mean values of some physicochemical parameters of most of the stored water samples significantly (P<0.05) exceeded that of Sources and ranged in the following order: T (15.3±0.3^oC - 28.3±0.5^oC), pH (6.4±0.1 - 7.6±0.1), TDS (192.1±11.1 ppm - 473.7±27.9 ppm), TH (10.6±1.7 mg/L - 248.6±18.6 mg/L), BOD (0.5±0.0 mg/L - 3.2±0.3 mg/L), Mg²⁺ (6.5±2.4 mg/L - 29.1±3.2 mg/L) and Ca²⁺ (6.5±2.4 mg/L - 51.6±4.4 mg/L). The mean microbial counts obtained from microbial comparison of different points (Stored and Source) of collection showed that most of the stored water had counts significantly exceeding (P<0.05) those of the source water samples (cfu/100 mL) which ranged as follows: TC (3.1±1.5 - 156.8±42.9), FC (0.0±0.0 - 64.3±14.2) and HPC (47.8±12.1 - 266.1±12.2) across all sampled communities. Also, the predominant isolates recovered from the samples were identified as Escherichia coli, Klebsiella pneumonia, Pseudomonas aeruginosa, Enterobacter aerogenes, Aspergillus spp, Mucor spp, Rhizopus spp and Candida spp. The presence of these pathogenic and potentially pathogenic organisms in the waters and the high counts of the indicator organisms suggest the waters to be a threat to public health.

Purpose of research was to determine changes in optical quality for monthly disposable soft contact lenses (SCL) wearers with new and monthly worn SCL. Retinal straylight was assessed in SCL wearers using a C-Quant straylight meter. The study included 33 participants (age 22 ± 1.4 years) who wore monthly disposable silicone hydrogel contact lenses. Measurements were taken with month-old SCL that had been worn for no more than 4 hours. Participants then replaced the old lenses with new ones. After a 15-minute adaptation period, straylight measurements were taken with the new SCL. A questionnaire was administered to all participants, inquiring about vision complaints and the type of contact lens material used. The decimal logarithm of the stray-light parameter, log(s), was notably higher with month-old SCL (log(s) = 0.97±0.17) than with brand-new SCL (log(s) = 0.86±0.15), p < 0.001. The average increase in retinal straylight after a month of SCL use was log(s) = 0.11 ± 0.08. The questionnaire revealed that 35% of participants observed a reduction in visual quality after wearing the contact lenses for a month. Results showed that monthly disposable soft contact lenses could reduce visual quality when scheduled replacement time has been reached.

(1) Background: In a society with an advancing aging rate, medical systems are coming under pressure due to an increasing flow of elderly patients with multiple somatic diseases, exacerbated by their fragile psychological and sociological backgrounds. We aimed to investigate the relationship be-tween frailty and loneliness in elderly people. Our research question was “Is there a link between the loneliness and frailty in elderly people?” (2) Methods: To assess the link between loneliness and frailty, we conducted a search accessing Index Medicus and PubMed; the timeframe of our research was from 2013 till 2023. Data regarding the study population, as well as loneliness and fragility assessments and approaches, were extracted. (3) Results: A positive relationship between loneliness and the appearance and progression of frailty in elderly people is argued for. (4) Conclusions: Maintaining a balance in the body’s functionality for as long as possible requires the diagnosis and periodic assessment of health status at any age and, due to the various socio-financial and emotional implications, is particularly imperative for elderly patients. Frailty can be prevented, and it appears that it could even be reversed if early diagnosis and appropriate interventions are made. Therefore, knowledge of relevant risk factors—most likely including loneliness—is an absolute necessity to slow down, stop, and even reverse the frailty process.

Many farms are replacing the lighting with light emitting diode (LED) bulbs because of the technological modernization. We aimed to investigate the effects of incandescent light (IL) and LED lighting on Cobb500 broiler chickens for six weeks. Production parameters (body weight, feed consumption, feed conversion ratio), calculated slaughter values (yield%, relative breast%, thigh%) and breast meat quality parameters (pH at 45 min and 24 h postmortem, color, drip loss, kitchen equipment losses, shear force, meat composition) were recorded. Non-stop recordings were used to analyze the behavior of the birds in several periods of the rearing. LED group was significantly better in body weigh parameter between week 1-5 and feed conversion ratio between week 2-3. The most significant difference in behavior was observed in the middle of the rearing period. The chickens in the LED group spent more eating time, drinking time, interacting, and resting less. There was no difference in the meat quality parameters, only shear force was significantly lower in the LED group (1781.95±0.33 g/s vs. 2098.82±0.42 g/s). Based on our results, LED lighting can bring positive changes in animal production efficiency, behavior, and important characteristics for meat consumers.

(1) Introduction: The COVID-19 pandemic presented unique challenges for patients and healthcare providers, especially for those working with obesity and related health problems. E-health has emerged as a crucial tool for the follow-up of users undergoing bariatric surgery during this period, allowing remote monitoring of users' health status and providing access to virtual consultation with health professionals. This study aims to analyze the impact of the use of telemedicine during the COVID-19 pandemic on the results of bariatric surgery and user satisfac-tion with this follow-up. (2) Method: Observational study with retrospective data collection. The variables were divided into several groups: health data, associated comorbidities, quality of life, quality of sleep and satisfaction with telemedicine monitoring. (3) Results: Surgery significantly affected weight loss, in general more than 75% loss of excess weight. Comorbidities, like the qual-ity of life, were reversed over time, with 50% of subjects maintaining excellent levels. Although most users were satisfied with the monitoring, the variables had no relationship. (4) Conclusions: The follow-up assured by telemedicine did not alter the results of bariatric surgery, which may allow us to infer that it may be an option to consider for regular monitoring of the post-bariatric surgery process.

In the present study, we aimed to observed hair follicle development and describe Wnt10b/β-catenin signaling pathways related to hair follicle development in different ages of Rex rabbits. Six Rex rabbits (3 male and 3 female) of 15, 30, 60, 90, 120 and 150 days of age were selected and skin samples were collected for hair follicle development and Wnt/β-catenin signaling pathway genes expresion detection. The results showed that the the values for body weight, coat length, skin thickness, skin area, and skin weight of Rex rabbits were increased significantly with age (p &lt; 0.05). The total hair follicle density, secondary hair follicle density and the ratio of the secondary hair follicle density to the primary hair follicle density in 120 days of Rex rabbits was higher than that in the other ages (p &lt; 0.05), and the major hair follicles were in the growing period at 15 days and 30 days of age, some of them had already entered the degeneration period at 60 days of age, and most of them entered the degeneration period at 90 days of age, the presence of quiescent hair follicles and the enlargement of primary hair follicles were also observed. At 120 and 150 days of age, the back hair follicles entered the growing period, and the secondary hair follicles had obvious differentiation. Furthermore, the expression of the Wnt10b, CTNNB1, adenomatosis polyposis protein (APC), Disheveled 2 (DVL2), glycogen synthase kinase 3β（GSK-3β）, Lymphoid enhancer-binding factor 1 (LEF1), dickkopf-1 (DKK1) and transforming growth factor beta 1 (TGFβ-1) genes in the skin tissue of Rex rabbits at different age was significantly differences (p &lt; 0.05), and the expression of the Wnt10b, CTNNB1, DVL2, GSK-3β, and TGFβ-1 genes at 90 days was higher than that in the other days, the expression of the LEF1 and DKK1 genes at 60 days was higher than that in the other days. As western blotting indicated, the β-catenin protein phosphorylation (P-CTNNB1) levels in the skin tissue of Rex rabbits shows the trend of first increasing, then decreasing and then increasing, 60 days, 120 days and 150 days significantly higher than 15 days, 30 days or 90 days (p &lt; 0.05). With the increasing of ages, the GSK-3β protein phosphorylation (P-GSK-3β) levels in the skin tissue of Rex rabbits were increasing, and maximum at 120 days of age (p &lt; 0.05). These results show that ages could influence on the fur quality and hair follicle traits of Rex rabbits, and Wnt10b/β-catenin signaling pathways is involved in the biological process of periodic hair follicle development in Rex rabbits. Considering the rule of fur growth, the slaughter age of Rex rabbits should not be earlier than 120 days.

Background: Features of post-traumatic stress disorder and anxiety may be present in Pulmonary Embolism (PE) patients along with impaired Quality of Life (QoL). We aim to evaluate health related QoL, anxiety and satisfaction with life, during the pandemic, in patients with a PE. Methods: Patients with PE were enrolled during their follow-up. All participants completed the Short Form 36 (SF-36) questionnaire, the State Trait Anxiety Inventory (STAI) X1 and X2 form, and the Satisfaction with Life Scale (SWLS). Results: 92 PE patients were included (mean age±SD=62.50±15.33 years, 56.5% males). Most of the mean values of the SF36 subscales were above the normative value except for “physical role functioning”) (45.92±42.41). “Emotional role functioning” (51.26±43.31) and “general health perceptions” (GH) (54.02±18.79) were slightly above the normative value of 50. Mean STAIX1 levels were 37.05±11.17 and mean STAIX2 levels were 39.80±10.47. Mean SWLS levels were 23.31±6.58. According to multiple linear regression analysis, mental healthscore (MH) and GH were predictive of SWLS(F (10,76) = 10.576, p

Sleep quality is known to affect automatic and executive brain functions such as gait control and cognitive processing. This study aimed to assess the effect of dual tasks on gait spatiotemporal parameters among young adults with good and poor sleep quality in the United Arab Emirates. In total, 65 young adults with a mean age of 21.1±2.5 were assessed for gait analysis during single-task and dual-task conditions. The participants’ sleep quality was assessed using the Pittsburgh Sleep Quality Index (PSQI), and gait was assessed using the BTS Gaitlab System. The participants were asked to walk at natural speed as a single-task condition, followed by walking while performing a cognitive task as a dual-task condition. The parameters assessed included the gait velocity (m/s), cadence (steps/min), step width (m), and stride length (m). The DTC on each gait parameter was calculated. The Mann–Whitney U test was used to compare the differences in the DTC on gait variables between the good and poor sleep quality groups, and the Spearman correlation test was used to assess the correlation between total PSQI scores and the DTC. At a significance level of p&lt;0.05, a significant difference in cadence between the two sleep quality groups was observed, in addition to a positive correlation between sleep quality and the DTC effect on gait mean velocity, cadence, and stride length. Our findings also revealed a greater DTC on participants with poorer sleep quality. These findings contribute to our understanding of the significance of sleep quality in gait performance while multitasking in younger populations.

This study investigates the concentrations of physicochemical and heavy metal contaminants in the groundwater of the Middle Awash Basin, Ethiopia, to inform targeted water management strategies. A total of 32 groundwater samples were collected from 16 stations via piezometers and boreholes at the end of both the dry (June 2021) and wet (October 2021) seasons. Utilizing Inductively Coupled Plasma Mass Spectrometry (ICP-MS), Atomic Absorption Spectroscopy (AAS), and in situ metering, 22 physicochemical and 24 heavy metal parameters were analyzed. The data revealed significant levels of contamination; notably, sample GW11 had extraordinarily high concentrations of total dissolved solids (10,826 mg/L), strontium (908 µg/L), molybdenum (802.4 µg/L), zinc (6060 µg/L), and electrical conductivity (15,645 µS/cm), while GW12 exhibited elevated levels of aluminum (2615 µg/L), zinc (4446 µg/L), and arsenic (117.2 µg/L). Contaminants such as arsenic, vanadium, gallium, lithium, rubidium, chromium, manganese, copper, and zinc were found enriched in groundwater near Lake Beseka, influenced by agricultural runoff from sugarcane plantations and agro-industry activities. Over half of the groundwater sources were unsuitable for drinking, posing significant health risks to local communities that rely heavily on these sources due to limited access to clean surface water. The findings emphasize the urgent need for comprehensive groundwater management and remediation plans in the Middle Awash region to ensure safe and sustainable water use, particularly addressing the variation in contamination levels influenced by Lake Beseka. These measures are critical to protect public health and support local development in the face of ongoing environmental and anthropogenic pressures.

The term Air Quality (AQ) pertains to the standard of air, which has a direct impact on the health and well-being of individuals. It is crucial to maintain high Air Quality (AQ), for better health and productivity. Though most of people spend more time indoors nowadays, it is not to be overlooked that the pollutant concentration in indoor air is directly linked to the outdoor air quality. Due to the changes in occupancy patterns, outdated maintenance of ventilation systems, and structural flaws in buildings, the indoor air is significantly polluted; pollutants emitted outdoors enter indoor air through open windows, ventilation systems and infiltration. In this paper, we have proposed a new technique, DTMCPM (discrete-time Markov chain (DTMC) model for the analysis and forecasting of AQ, using the power method). Specialized sensors and equipment to measure different pollutants, such as particulate matter, ozone, nitrogen dioxide, sulfur dioxide, benzene and toluene, are used to collect data by the Institute of Pakistan Air Quality Monitor in various cities; the data is converted to US EPA standard for all pollutant species. This data is used to calculate the transition matrix, steady-state values and mean return rate for the analysis of IAQ. The calculated and actual return rates have been compared and the proposed model is found to have a low average prediction error of 2.356%.

Industrial robots are slowly but surely entering manufacturing companies. This paper explores the effects that robots have on productivity, exports, quality, sustainability and labor in European manufacturing companies. There is lack of research on industrial robot usage and its effects in developed countries. Most research is done on Chinese companies and often the data is outdated. The data in this paper is from the European Manufacturing Survey project conducted in 2022 and includes 476 manufacturing companies. Results of the effects of Industrial robots on Quality, Labor Productivity, Exports and Environmental saving technologies are done by use of T-test between industrial robots’ adopters and non-adopters. However, the effect of higher investment into environmental technology by industrial robots’ adopters was researched by 2-step OLS regression analysis with control variables representing the contextual characteristics of companies. The results show positive effects on all variables. Results show that larger usage of robots are in low to medium-technology-intensity industries, that robots contribute to labor productivity, exports and that companies employing robots usually also employ environmentally saving technologies.

Water quality assessment stands as a fundamental step in water resource management. In addition to substances and organisms present in the water, land use and land cover are two factors affecting also water quality. This study analyzed the correlation and influence between water quality and land use and land cover in the Miranda River Basin (MRB) and the natural wetlands in the Pantanal Biome. Using a watershed-wide approach, results suggested that water quality management policies can be considered in terms of sub-basins (smaller planning units). The Water Quality Index (WQI) was considered GOOD or EXCELLENT throughout the MRB. It was observed that the natural wetlands have the capacity to contribute to improve WQI, with reductions in thermotolerant coliforms and turbidity; however, high values were found for thermotolerant coliforms, a temporal increasing trend of biochemical oxygen demand (BOD), and a reduction in dissolved oxygen and total phosphorus. Conversely, it was found in these flooded areas a trend of decrease in dissolved oxygen and an increase in BOD concentrations. Natural wetlands play important hydrological and ecological roles in water quality, storing, removing, and cycling nutrients. They are highly relevant areas for defining watershed management and conservation strategies, environmental protection, and providing ecosystem services.

The increasing availability of longitudinal data (repeated numerical observations of same units at different times) requires the development of flexible techniques to automatically detect common errors in such data. Besides obvious and easily identifiable cases, such as missing or out-of-range data, large longitudinal dataset often present problems not easily traceable by the techniques used for generic datasets. In particular, elusive and baffling problems are i) inversion of one or more values from one unit to another; ii) anomalous jumps in the series of values, iii) errors in the timing of the values due to a recalculation operated by the data providers to compensate previous errors. This work proposes a statistical-mathematical approach based on a system of indicators that is able to capture the complexity of the described problems by working at the formal level, regardless of the specific meaning of the data. The proposed approach identifies suspect erroneous data and is applicable in a variety of contexts. We implement this approach in a relevant database of European Higher Education institutions (ETER) by analyzing Total academic staff, that is one of the most important variables, used in empirical analysis as proxy of size and also considered by policy makers at European level.

Exploring for green and affordable protection of perishable fruit like cherry tomato is of significance. Here the protective efficacy and its underpinnings of coating with oleaster gum, alone or incorporated with cuminal, on cherry tomatoes stored at ambient temperature were investigated. The composite coating of oleaster gum with 0.1% cuminal reduced decay, respiration rate, weight loss, and softening of the fruit and decelerated their decreases of total soluble solids, titratable acidity, and soluble proteins, and therefore maintained their marketability. Furthermore, it reduced the accumulation of O•− 2and H2O2 in fruit, and mitigated cell membrane lipid oxidation and permeabilization, thereby retarding their senescence. Instrumentally, it elevated the activities of superoxide dismutase, catalase, peroxidase, and ascorbate peroxidase and the levels of ascorbic acid and glutathione. This potentiation of the fruit antioxidant system makes the composite coating a promising approach to keeping the postharvest quality of perishable fruit.

This scientific paper explores the increasingly widespread use of collaborative robots in the industrial environment, highlighting them as a solution to challenges related to the high costs of human labour and the associated management difficulties. The authors focus on the process of defining requirements for the implementation of collaborative robots, providing strategies based on mathematical management models. This approach translates into significant benefits for companies, such as cost reduction, quality improvement, and increased operational efficiency. Additionally, the paper proposes an innovative mathematical model for assessing total costs, budgeting, profitability, and electric power consumption associated with the operation of collaborative robots. This model allows for a comparison between the costs involved in using human labour and those associated with collaborative robots, providing critical information for technological investment decisions. The efficiency of this mathematical model is demonstrated through a practical application, where collaborative robots were integrated into a production environment, and costs and efficiency were evaluated compared to the use of human labour. This scientific paper provides a systematic and efficient approach to implementing collaborative robots in industrial processes, benefiting from strategies based on mathematical management models and an original mathematical model for evaluating performance and associated costs.

Introduction: There is a significant gap in accessibility to mental health care in Canada, worsened by various factors including rurality. Therefore, an important resource is crisis hotlines. Responders are hypothesized to be affected by the occupational phenomenon of burnout, partly due to the inherent nature of the job and partly due to the widespread negative mental health effects of the COVID-19 pandemic. Difficulties for crisis hotlines is expected to continue due to the ongoing fallout from the pandemic and from increased awareness of the Canada Suicide Prevention Line after introduction of a new 3-digit (9-8-8) number. This manuscript aims to characterize the population of Canadian crisis hotline responders and investigate the variables that contributed to burnout during COVID-19.; Methods: An online questionnaire assessed sociodemographic information, shift related variables, burnout, and current support methods utilized by crisis hotline responders across Canada. A qualitative component was also included to reflect participants’ experiences; Results: The cross-sectional assessment was completed by 136 participants. During COVID-19 Canadian crisis hotline responders reported relatively high levels of burnout/stress on both the Copenhagen Burnout Inventory and Professional Quality of Life Survey. Younger age emerged as the sole predictor of greater burnout amongst the variables we studied. The normal limitations of a cross-sectional survey apply. The COVID-19 pandemic may have affected the generalizability through several factors.; Conclusions: Findings suggest that Canadian crisis hotline responders, especially younger ones, require greater support to manage workplace burnout. Nevertheless, conducting comprehensive studies during times when there are no public health emergencies are warranted to understand the full scope of burnout in this population.; Recommendations: Based on our data, we offer 5 recommendations to mitigate the risk of burnout for responders and improve access to this important public health resource.

The rural population in the Dry Zone of Sri Lanka is largely affected by Chronic Kidney Disease of Unknown etiology (CKDu). According to the multidisciplinary research carried out so far, quality of groundwater was considered one of the possible causative factors for CKDu. Therefore, the assessment of water quality variations and evolution mechanism of water quality parameters of drinking water sources is important for identifying any relationships between CKDu and the drinking water quality. The current study aimed to perform a detailed hydrogeochemical investigation using isotopic and chemical methods on selected groundwater sources in the CKDu-endemic, non-endemic and control areas. TDS, hardness, Mg2+, Na+ and F- are the main parameters that cause water quality deterioration but, their derived mechanism in these three regions are completely different. The excess concentrations of F- and Mg2+ in the CKDu endemic area, low F- and high Mg2+in the CKDu non-endemic sedimentary formation, and either combinations of low F- and low Mg2+, high F- and low Mg2+ or low F- with high Mg2+ in the control area are the distinct features. The primary processes that regulate the evolution of groundwater types in CKDu endemic and control area is the weathering of silicates. Similarly, in the CKDu endemic area, carbonate dissolution and reverse ion exchange are prominent. Cation exchange and evaporite dissolution are more pronounced in the control area. Shallow groundwaters are evapo-concentrated hence it further deteriorates quality when compared to the deep groundwater with non-mixed, non-evaporated, and higher elevation recharge effect (from 100 m altitude) in the CKDu endemic area. Dilution decreases the ion content in the CKDu endemic area while evaporite dissolution further increase it in the control area after the rainy season. Evaporation, and seawater mixing affected the quality of groundwater in the non-endemic sedimentary formation. A statistically significant difference of F- ionic ratio with Na+, Mg2+, Ca2+ in the endemic and control areas. Intense rock weathering combined with the desorption added excess F- to the groundwater in the CKDu endemic area while the cation exchange and fluorite dissolution is contributing factor in CKDu control area. All the groundwater samples analyzed have exceeded the moderate hardness threshold. However, prominent Mg hardness proportion together with excess F- in the CKDu endemic area may produce nephrotoxic MgF2 complexes that may trigger renal damage. In contrast, produced NaF complexes in the CKDu control area leads to reduction of F- toxicity in the human body. Therefore, increased levels of magnesium, fluoride and TDS in the shallow groundwater, along with geochemical, hydrogeological and climatic factors, may contribute to the CKDu in the Dry Zone of Sri Lanka.

This study investigates how root environment acidification impacts tea seedlings and the role of magnesium (Mg) in mitigating these effects. We examine varying pH and Mg levels' influence on tea seedlings' resistance to abiotic stress, focusing on antioxidant capacity and nutritional content. In a hydroponic experiment, we varied root pH (3.5, 5.0, 6.5) and Mg concentrations (0.01, 0.4, 0.8 mM), assessing parameters like antioxidant capacity, peroxidative damage, and nutritional content at 1, 7, 15, and 30 days post-treatment. Root environment acidification and Mg deficiency worsened peroxidative damage in tea plant leaves and roots. Increased Mg supplementation enhanced antioxidant enzyme activity, reducing malondialdehyde and mitigating oxidative damage from root environment acid stress. Under acid stress, 0.8 mM Mg significantly increased tea leaf polyphenols, amino acids, and water-soluble extracts. Mg notably boosted chlorophyll content, surpassing lower Mg levels at pH 5. Additionally, Mg reversed root vitality inhibition induced by acid stress, leading to increased nitrogen, potassium, and Mg concentrations in leaves, promoting balanced nutrient absorption. Mg supplementation is crucial for enhancing tea plant antioxidant capacity, alleviating growth inhibition from root environment acid stress, and improving chlorophyll content and root vitality, highlighting Mg's significance in tea cultivation and broader agricultural practices.

Background: Low-level physical activity (PA) among Chronic Low Back Pain (cLBP) is associated with various biopsychosocial factors. This research aimed to study the predictors of PA behavior among cLBP patients. Methods: In the present study 300 eligible patients with cLBP who referred to comprehensive health service centers in the Shahid Beheshti University of Medical Sciences (SBUMS) in Tehran, Iran were random selected.To diagnose the predictors of PA behavior, all the Theory of Reasoned Action (TRA) constructs were examined as risk factors to see if they influence on the probability of PA behavior occurrence and were interpreted through odds ratio (OR). SPSS version 19 was used to analyze the data. Results: Totally 280 cLBP patients with mean age of 57.07 ±13.09 years old participated in the study. This study showed that motivation to comply significant predictor the cLBP patients for subjective norm OR (%95CI): 2.095(0.116-2.792), p-value<0.001), intention was significant predictor for perform the PA behavior OR (%95CI): 1.431(0.138-1.538), p-value <0.001), behavior beliefs could predictor for attitude OR (%95CI): 1.276(0.106-1.355), p-value= 0.002). attitude, normative beliefs, subjective norm ,and evaluation outcome behavior could predictors the cLBP patients for intention to perform the PA behavior OR (%95CI): 1.188(0.032-1.312), p-value<0.001)., OR (%95CI): 1.158(0.076-2.208), p-value=0.003) ., OR (%95CI): 1.104(0.076-1.128), p-value<0.001) ., OR (%95CI): 0.814(0.301-1.440), p-value=0.007). Conclusions: This study showed that the cLBP patients who were normative beliefs and evaluation regarding PA behavior could effect on the intention to engage in greater PA than those via other constructs (attitude and subjective norm). This study showed that the cLBP patients who were normative beliefs and evaluation regarding PA behavior could effect on the intention to engage in greater PA than those via other constructs (attitude and subjective norm). This study showed that the cLBP patients who were normative beliefs and evaluation regarding PA behavior could effect on the intention to engage in greater PA than those via other constructs (attitude and subjective norm).

Introduction: Patients with hematological malignancies undergo intensive treatment and prolonged hospitalization, thus having a variety of physical and psychosocial symptoms and worse quality of life (QOL). Aim: This study aimed to assess the QOL and investigate the symptoms of hospitalized hematological cancer patients. Methods: A cross-sectional study was conducted in the hematology clinics and day units of two general hospitals of Heraklion, Crete. Adult patients with hematological malignancy and an adequate understanding of the Greek language participated. A demographic questionnaire, the European Organization for Research and Treatment for Cancer quality assessment questionnaire (EORTC QLQ-C30), and the MD Anderson Symptom Inventory (MDASI) were used for data collection. The level of statistical significance was set at p &lt;0.05. Results: The sample consisted of 120 patients, 42.5% of whom were women, with a mean age of 65.6 years. The mean time from diagnosis was 33 months. The global health status of QoL had an average value of 47.1. The highest levels of QOL were found in the subscale of cognitive function (72.8) and the lowest in the role function (46.1). Among the of EORTC QLQ-C30 symptoms scale, the lowest score was found in nausea-vomiting (11.0) and the highest in fatigue (59.1). In the MDASI, in part I (core symptoms), higher levels, but also medium intensities were reported at fatigue (78.3%, mean 3.5), drowsiness (65.0, mean 3.3), and distress (65.8%, mean 2.8). In part II, enjoyment of life (85.8%, mean 5.1) had the highest and relation with other people (67.5%, mean 3.7) the lowest scores. The increase in the severity of the core symptoms (part I) was related to females (rho = 0.193, p &lt;0.05) and comorbidities (rho = 0.220, p &lt;0.05). It also related to a significant decrease in all functional domains and an increase in fatigue (rho = 0.571, p &lt;0.05) of the EORTC QLQ-C30 questionnaire. The increased global health status was related to males (rho = -0.185, p &lt;0.05) and physical functioning with younger age (rho = -0.331, p &lt;0.05), higher education (rho = 0.239, p &lt;0.05), fewer months from diagnosis (rho = -0.199, p &lt;0.05) and low comorbidity (rho = -0.209, p &lt;0.05). Finally, the increased global health status was significantly related to lower symptoms determined by the total average symptom score (-0.491, p &lt;0.05). Conclusions: The QoL of hematological cancer patients is significantly decreased during treatments due to a significant number of symptoms that must be taken into consideration for high-quality individualized care.

Human existence and development ever demanded suitable shelter, the dual direc-tion relationship of human-residence have always been a material dealt with to enhance residential living conditions. The emersion of COVID-19 pandemic had introduced ab-rupt and dramatic changes in human life protocols, that exerted clear pressure on differ-ent sectors within the built environment. Housing beard great impact due to needs of so-cial distancing and quarantine obligations to increase chances of human existence. In order to measure human adaptation and residence alterations following new residential requirements, Quality of life investigations to promotse better built environment for oc-cupants had been facilitated using theory of residential dissatisfaction already been adopted in current study. Residents’ responses had been extracted regarding their dissat-isfaction applying Likert scale for measurement and evaluation. The study focused on homogenous housing estates in Erbil City precisely apartments have been selected with different plans and building layouts for their widespread use in the city and have been occupied during the three stages of study to go beyond investigating direct impact of the pandemic towards permanence of alterations and adaptation even after pandemic. Rea-sons causing changed dissatisfaction levels have been investigated for better reliability towards formulating final conclusions and recommendations. Findings showed in-creased dissatisfaction during pandemic in most of spaces, apartment layout and space design significantly affected responses and demands. Levels of dissatisfaction after pan-demic were different from stability to slight decline in dissatisfaction. The effect of limited external spaces in apartments had limited the possibility to manage the pressure, a case that might be less demanding in single family housing due to availability of private gar-dens.

Sarcopenia, characterized by the progressive loss of muscle mass and strength, poses significant risks to physical health, leading to a reduced quality of life (QoL), increased disability, and higher mortality rates among older adults. Early detection and intervention are crucial to prevent the cascading effects of sarcopenia, including falls, fractures, and hospitalization. This study determined an optimal cut-off point of the SarQoL® score that can serve as an effective screening tool among community-dwelling Korean older adults. The study involved 451 South Korean older adults, assessing the correlation between SarQoL® scores and sarcopenia as defined by the Asian Working Group for Sarcopenia (AWGS) criteria. Participants completed the Korean version of the SarQoL questionnaire. Findings revealed that individuals diagnosed with sarcopenia had significantly lower SarQoL® scores compared to non-sarcopenic participants, with a cut-off score of ≤ 58.5 providing good diagnostic accuracy (AUC = 0.768, sensitivity = 69.3%, specificity = 75.2%). These results underscore the questionnaire’s reliability and validity in screening for sarcopenia-related QoL impairment and its potential utility as a clinical tool. Implementing the SarQoL® in routine assessments could improve clinical outcomes by enabling earlier and more precise identification of sarcopenia.

Obstructive sleep apnea (OSA) often goes unrecognized despite common symptoms such as excessive daytime sleepiness, fatigue, and impaired quality of life (QoL). CPAP is the gold standard treatment for OSA, but optimal daily usage and time needed for observable effects remain unclear. This study aimed to investigate the short-term effects of CPAP on daytime sleepiness and QoL in patients with severe OSA. Medical records were collected from 87 patients with severe OSA who initiated CPAP therapy. Also, validated questionnaires were used before and after one month of CPAP to analyze QoL - the Calgary Sleep Apnea Quality of Life Index (SAQLI), the Cues to CPAP Use Questionnaire (CCUQ), and daytime sleepiness - the Epworth Sleepiness Scale (ESS). Multiple regression analysis was conducted to identify predictors of CPAP usage. Of the total participants aged 55.6±12.5, 77% were males, and 62% were CPAP adherent. Reductions in daytime sleepiness (ESS) were noted, as well as improvements in both overall QoL (SAQLI) and specifically in the domains of daily functioning, social interactions, emotional well-being, and symptom perception. Important cues for CPAP usage recognized by patients were physicians’ instructions and physicians’ worry regarding patients' condition. Furthermore, multiple regression revealed higher SAQLI scores and lower ESS scores as positive predictors of CPAP usage, along with lower AHI after one month of CPAP being associated with sufficient adherence.

Grain quality, cooking quality and nutritional quality traits are some of the major attributes that enhance uptake and utilisation of improved cowpea varieties. Therefore, there is need for a better understanding of the genetic variation and inter-relationships among these quality traits in cowpea to integrate them in cowpea breeding programs. The study was conducted to determine genetic variability among 306 cowpea genotypes for grain quality, cooking quality and nutritional quality traits and to understand the interrelationships among these traits for exploitation in breeding programs. The results showed highly significant differences (P

Stroke survivors often face diverse unmet needs, highlighting the significance of identifying and addressing these needs to enhance rehabilitation outcomes and overall quality of life. This study aimed to validate the modified Needs Assessment Questionnaire (mNAQ) as a reliable and valid tool for assessing the needs of stroke patients in the Greek context. Additionally, the research sought to identify potential differences in the assessment of stroke patients' needs based on their stroke phase and National Institutes of Health Stroke Scale (NIHSS) scores. A sample of 71 adult stroke survivors, adhering to World Health Organization guidelines and providing autonomous consent, participated in the study. The mNAQ, comprising 141 items across 12 domains, was uti-lized to evaluate stroke patients' needs. The NIHSS and Barthel Index (BI) were employed for functional independence and mobility assessment. Data analysis incorporated confirmatory fac-tor analysis, exploratory factor analysis, and Cronbach's reliability analysis to establish con-struct validity and internal consistency. Concurrent and known-groups validity analyses were conducted, and Spearman’s rho correlation explored the relationship between mNAQ and BI scores. Non-parametric analyses were applied to identify differences based on stroke phase and NIHSS scores. The study revealed that the mNAQ initially lacked satisfactory psychometric properties in the Greek context. Subsequent modifications, guided by confirmatory and explora-tory factor analyses, resulted in a refined three-factor scale encompassing 31 items in the domains of communication, mobility, and social functioning needs. This adapted measure effectively dif-ferentiated between acute and chronic stroke patients and those with minor and moderate strokes. In conclusion, the validated 31-item Greek mNAQ emerges as a crucial tool for compre-hensively assessing the needs of stroke patients. Its application holds promise for optimizing post-stroke care, improving functional outcomes, and ultimately enhancing the overall well-being and quality of life for stroke survivors.

Studies have established the crucial role of sleep among the students which plays a significant role in their mood. This study aimed to examine the mood disorders and sleep quality among undergraduate students at the University of Georgia (UG) and comparison between students’ nationality.This cross-sectional study was a self-reported questionnaire comprised of demographics including age, gender, year of study, current location, lifestyle data (Exercise and smoking), the Depression, Anxiety, and Stress Scale (DAS21) and the Pittsburgh Sleep Quality Index (PSQI). We performed a descriptive analysis, and the Chi-square was statistically significant at p<0.05. The prevalence was at a 95% confidence interval (95% CI) as multivariate analysis examined the multicollinearity. The female students were most of the respondents, below the age of 20 years. The student's mean age was 20.20 (SD± 3.0). DAS report presented 72.7% of students with depressive symptoms, 77.8% with anxiety symptoms, and 62.2% had stress. Georgian students were more at risk of having depressive complaints (95% Cl[1.567-3.788]), anxiety (95% Cl[1.612-4.285]), and stress symptoms (95% Cl[1.743-3.831]). There was a strong relationship between the students who experienced poor sleeping patterns and depressive complaints (aOR 0.10). The students who were smokers (aOR 0.39) were more likely to report anxiety symptoms than the students that do not exercise (aOR 1.68). It was observed that students with depressive symptoms, anxiety, and complaints of stress had a significantly high risk of poor sleep quality. Further studies are recommended to curb psychological symptoms of mood changes in association with sleep disorders among students.

Scholars in the field of environmental economics have extensively examined the relationship between foreign direct investment (FDI) and economic growth. However, they have often failed to consider the crucial roles played by technological innovation and financial development in determining environmental costs. The rapid economic growth and urbanization witnessed in BRICS countries have led to a substantial increase in energy demands, resulting in significant environmental degradation. This study aims to investigate the impact of financial development (including measures such as broad money, domestic credit to the private sector, FDI, and green technological innovation) on carbon emissions in BRICS countries using data from 2001 to 2023. The results of the study demonstrate a strong cross-sectional dependence among the countries in the panel. The Augmented Mean Group (AMG) estimator reveals a negative and statistically significant long-term relationship between broad money, FDI, green technological innovation, and CO2 emissions. On the other hand, domestic credit to the private sector shows a positive and significant association with carbon emissions. To determine the direction of causality, the study utilizes the Dumitrescu and Hurlin panel causality test. The findings indicate a non-directional long-term causality between financial development and CO2 emissions. However, a unidirectional causality is observed between green technological innovation and carbon emissions. Based on these findings, the study suggests that the development of industries, financial institutions, and technological innovation is crucial for attracting high-quality FDI in BRICS countries. However, it also highlights the significant contribution of these developments to environmental degradation, necessitating urgent policy responses.

Source water quality is a key determinant of drinking water quality. The recast European Union 2020/2184 drinking water directive (DWD) introduced the obligation for comprehensive risk assessment in drinking water supplies, including the water source and incorporated new elements of natural origin in the list of parameters to be monitored. The current study is the first comprehensive assessment of 15 natural elements (B, Ba, Be, Ca, Co, K, Li, Mg, Mo, Na, Se, Sr, Ti, U and V) in 1155 (82%) Hungarian drinking water sources, including surface water, bank filtered and groundwater sources. Parameters posing a risk to health (Se, V and U) were typically below the lower limit of quantification (LOQ), but higher concentrations (max. 7.0, 17 and 41 µg/L, respectively) may occur in confined locations, the latter exceeding the DWD parametric value in one water supply. Li in a small geographical area, Mg and Ca in the majority of the water supplies reached the concentration range assumed to be protective to health. Water sources were grouped in 6 clusters based on their element distribution, some of them also showing clear geographical patterns. Water types were not differentiated, with the exception of karstic waters (dominated by Ca and Mg). None of the investigated parameters are expected to be a source of public health concern.

In this digital era, online learning and teaching is an important platform for college and university learners which required many technical facilities and in depth knowledge to have learning process effectively. Students and teachers in Higher Education Institutions (HEIs) were forced to grapple with the inevitability of shifting to online classes due to the advantages of effective distance learning or for large learning group. In the case of Oman, there have been some efforts to integrate alternative learning mechanisms such as online and mobile education in the past but not followed the scale in the post pandemic world. This study seeks to utilize the principles of Total Quality Management (TQM) through the implementation of Quality Function Deployment (QFD) as a way to better understand the experiences of Omani teachers and students from HEIs. A voice of customer from teachers and students have been collected and recorded. In this regard, 165 staff and 355 students from HEIs of Engineering participated in the survey. After the survey, a house of quality analysis was done to analyze the requirements based on how strongly they are related to the standard learning outcomes expected from HEIs in Oman. The results show that more attention is required in online education in the Sultanate of Oman before it is implemented as a major part in learning and teaching.

Buckwheat is important not only as a crop that improves soil quality and reduces erosion, but its excellent nutritional profile for usage in functional foods. This study aimed to investigate how long-term storage (3, 6, and 9 months) affects Novosadska variety buckwheat's chemical, nutritional, and antioxidative properties, phenolic acids and bioflavonoids profiles. Standard traditional methods were used for quality determinations, and instrumental (spectrophotometry, reverse-phase high performance liquid chromatography) for antioxidant activity and bioactive compounds determination. One-way ANOVA, and Tukey’s HSD post-hoc were performed for statistical data processing. Throughout the storage period, proximate composition and starch content significantly decreased (p&lt;0.05), while total carbohydrates, β-glucan, and energy value significantly increased (p&lt;0.05). Significant decrease in pH and alcoholic acidity of 0.55 pH units, and 0.33% DM, were observed. Total phenol content and antioxidant activity decrease to 5.57 mg GAE/g DM TPC, 22.20 μmol Fe2+/g DM FRAP and 8.12 μmol TE/g DM DPPH, during the storage (p&lt;0.05). Of fifteen phytochemical compounds, gallic, p-coumaric, trans-cinnamic acids, and epicatechin were in high abundance, with a notable decrease in epicatechin (38%). To the authors' knowledge, dihydrocaffeic and phloretic acids, daidzein, naringin, and naringenin were quantified in buckwheat flour for the first time. Easy adaptability to the environment, ability to attract various insects, speedy short-season growing plant for food, many nutritional and health benefits, gives buckwheat potential to be sustainable and biodiversity-friendly crops.

Bluetongue is not a contagious disease. It spreads very quickly and uncontrollably, considering that it is a vec-tor-borne disease transmitted by the genus Culicoides. Climate change has led to the fact that vectors and dis-eases have spread to the top of Northern Europe, causing great economic losses in livestock production. Even greater problem is controlling the disease, because numerous species of domestic and wild ruminants are sus-ceptible to bluetongue. The most effective tool against bluetongue disease is vaccination. There is no ideal vaccine against bluetongue virus (BTV) due to the serotype diversity of the strains. Thus, there is need for a vaccine for at least for 24 clinically significant serotypes. Sometimes it is difficult to obtain the desired amount of vaccine against a defined serotype on the market, and this led to the need for a new vaccine against blue-tongue disease. We tested an experimental inactivated novel vaccine against BTV4. Master seed BTV4 has been examined and characterized by sequencing. The novel BTV4 vaccine induce the onset of immunity at least at day 21 after the application of the first dose in more than 80% of vaccinated individuals, while specific antibodies against BTV are detected by the ELISA test for more than a year. Along with our laboratory results, the preliminary results of safety and efficacy trials are also presented. The side effects of novel vaccine are within the limits of permissible local reactions without generalized changes of health status, while the serology and challenge test leads to the conclusion that novel vaccine protects high percentage of vaccinated individuals against BTV4 or causes a significant reduction in the intensity and duration of the clinical signs in the vac-cinated sheep. Based on the trial results, new vaccine has given encouraging results in quality, safety and pre-liminary efficacy tests. Thus, we believe that a new vaccine against BTV is on the horizon. Keywords: bluetongue virus, inactivated vaccine, candidate, quality of vaccine, safety, efficacy We confirm that neither the manuscript nor any parts of its content are currently un-der consideration for publication with or published in another journal. All authors have approved the manuscript and agree with its submission to Vaccines.

The study was conducted at El-Sabahia Research Station (latitude 31°12'N, longitude 29°58'E), Alexandria, Egypt, to evaluate the effect of Spirulina platensis algae extract on the growth, yield, and juice quality of four sugarcane genotypes during the 2020/2021 and 2021/2022 seasons. The sugarcane genotypes tested (G.T. 54-9, G. 2003-47, G. 84-47, and G. 2004-27) were treated with four concentrations (0, 0.1, 0.2, and 0.3%) of Spirulina algae extract (SE) during their development as plant cane and first ratoon crops. At harvest, the growth, physiological, and juice quality characteristics were documented, while chlorophyll content was measured 210 days after sowing. Spraying canes with 0.2% of SE was the most effective treatment in enhancing all of the evaluated characteristics compared to those left without SE. Cane yield was more closely correlated with stalk weight (r = 0.88), followed by leaf area index (r = 0.82), chlorophyll content (r = 0.82), stalk length (r = 0.76), and number of tillers (r = 0.73), while recoverable sugar yield was closely correlated (P < 0.01) with sugar content% (r = 0.76).

Some evidence supports the influence of the implant macro-design and primary stability. Additionally, tactile perception can be used to assess implant stability when placing the implant. This research aimed to quantify the primary and secondary stability of three implant systems with two different macro geometries (cylindrical and conical) determined through the insertion torque and the implant stability quotient (ISQ) at the moment of implant placement as a function of implant-related factors (length, width, dental arch, and implant location in the arch), intraoperative factors (bone density determined subjectively by the clinician's tactile perception), and patient-related factors (age, gender and bone density determined objectively in the cone beam computed tomography (CBCT). Methods: 102 implants of three implant systems with two different macro geometries (conical and cylindrical) were placed in 53 patients. The insertion torque, the ISQ at the implant placement (ISQ0), and bone quality according to the clinician's tactile sensation were recorded on the day of the surgery. After a three-month healing period, the ISQ was re-evaluated (ISQ3). Results: Cylindrical implants exhibited significantly higher insertion torque and ISQ at the moment of the surgery and after three months than conical implants. Cylindrical implants also showed significantly lower indices of tactile evaluation of bone quality during the implant placement surgery. However, no differences were demonstrated in the bone density measured objectively in the CBCT. (4) Conclusions: The cylindrical implants achieved the highest values for primary stability (Ncm and ISQ) and secondary stability (ISQ after three months). Insertion torque was the variable that most influenced ISQ on the day of the surgery. Implant location (incisors-canines, bicuspids-molars) and the implant macro geometry were the variables that most influenced the secondary stability (ISQ at three months).

Diesel is consistently a very popular fuel for internal combustion engines. Its consumption in the European Union has been rising over recent years, as has the number of engines increasingly sensitive to fuel contamination. One of the most important parameters affecting diesel quality is water content. Although its exceedances of the standard’s permissible amount are not common, they carry the risk of serious damage to expensive, modern fuel injection systems. Current methods of measuring water content require both specialised personnel and equipment, as well as transporting the sample to a suitable laboratory. The research presented in this paper was aimed at verifying whether it would be possible to test the moisture content of diesel using impedance spectroscopy. Once refined, such measurement method could be used in situ. Analysing the properties of diesel is challenging, mainly because many types of the fuel are sold, the chemical composition of which is always a well-guarded manufacturer’s secret. The experimental results obtained on many types of commercially available diesel show that it is possible to use impedance spectroscopy to estimate the water content of different types of diesel fuel. The measurement accuracy achieved makes it possible to detect approaching or exceeding the permissible water content.

The use of low cost sensors has dramatically increased in recent years in all the engineering sectors. In the field of buildings and automotive, low cost sensors open very interesting perspectives, because they allow to monitor temperature and humidity distributions together with air quality, in a widespread and punctual way and allow control of all energy parameters. The main issue still open remains the validation of the measurements. In this work, we propose an innovative approach to verify the measurements given by some low-cost systems built ad hoc for automotive applications. Two independent low-cost measurement systems have been set to measure Particulate air Matter (PM) concentration, TVOC concentration, CO2 concentration, formaldehyde concentration, air temperature, relative humidity, pressure, air flow velocity and GPS position. These systems have been calibrated by the comparison with standard and certified sensors used by the regional authority of Emilia-Romagna region (ARPAE, Italy) for characterising the air-quality. The innovation of this approach lies in both the in-field comparison of low-cost and high quality sensors and the use of proper conversion approaches for mass concentration measurements. A quantitative analysis of the sensors performance is given, with a focus on effects of time-granularity, relative humidity, mass conversion from particle counts and size detection response. The results show that the low-cost sensors measurements of air temperature, relative humidity and particle number concentration are in a good agreement with high quality sensors measurements, with a strong impact of relative humidity on performance indicators. Overall, a good quality and consistency of the data among the sensors has been achieved.

The recent increase in global consumption of rice has led to increased demand for sustainable water management in paddy cultivation. In this study, we propose an enhanced paddy simulation module to be introduced to Soil and Water Assessment Tool (SWAT) to evaluate the sustainability of paddy cultivation. The enhancements added to SWAT include: (1) modification of water balance calculation for impounded fields, (2) addition of an irrigation management option for paddy fields that are characterized by flood irrigation with target water depth, and (3) addition of a puddling operation that influences the water quality and infiltration rate of the top soil layer. In a case study, the enhanced model, entitled SWAT-Paddy, was applied to an agricultural watershed in Japan. The results showed that the SWAT-Paddy successfully represented paddy cultivation, water management, and discharge processes. Simulated daily discharge rates with SWAT-Paddy (R² = 0.8) were superior to the SWAT result (R² = 0.002). SWAT-Paddy allows the simulation of paddy management processes realistically, and thus can enhance model accuracy in paddy-dominant agricultural watersheds.

The aim of this experiment was to investigate the effects of moisture content, additives and their interactions on the fermentation quality, aerobic stability and in vitro digestibility of mixed silage of amaranth and corn meal. Amaranths and corn meal were mixed in mass ratios of 69:31, 76:24 and 84:16, and the silage water content was adjusted to 60% (W1), 65% (W2) and 70% (W3), respectively. Silage treatments included no additives (U), the addition of Lactobacillus plantarum (L), the addition of cellulase (E), and the addition of Lactobacillus plantarum + cellulase (M) mixed reagents. The results showed that pH and ammonia nitrogen (NH3-N/TN) levels were significantly lower (p < 0.05) in W1 compared to W2 and W3. At the same time, dry matter (DM), organic matter (OM), in vitro dry matter digestibility (ivDMD), in vitro dry matter digestibility (ivDMD), in vitro organic matter digestibility (ivOMD), and in vitro crude protein digestibility (ivCPD) were significantly increased (p < 0.05). Meanwhile, the aerobic stability of mixed silage of seed amaranth and corn meal decreased with increasing water content. The aerobic stability of the L, E, and M treatment groups was improved by 15, 105, and 111 hours, respectively, compared to the control group at W1. pH and NH3-N/TN levels were lower in the addition of E (E and M) than in the absence of E (U and L) (3.73, 20.1 g kg−1DM vs. 3.64, 22.9 g kg−1 DM, p < 0.05).NDF and ADF were significantly lower with the addition of E than without the addition of E (598 g kg−1 DM, 145 g kg−1 DM vs. 632 g kg−1 DM, 160 g kg−1 DM, p < 0.05). However, CP, ivDMD, ivOMD, and ivCPD were significantly higher (p < 0.05). AA and NH3-N/TN were significantly reduced (p < 0.05) with the addition of L (L and M) compared to without the addition of (U and E). In conclusion, the best fermentation quality, in vitro digestibility and aerobic stability of amaranth and cornmeal mixed silage treated with Lactobacillus plantarum + cellulase (M) were achieved at 60% water content.

In recent decades, as eutrophication in inland and coastal waters (ICWs) has increased due to anthropogenic activities and global warming, so has the need for timely monitoring. Compared with traditional sampling and laboratory analysis methods, satellite remote sensing technology can provide macro-scale, low-cost, and near real-time water quality monitoring services. The Geostationary Ocean Color Imager (GOCI), integrated onboard the Communication Ocean and Meteorological Satellite (COMS) from the Republic of Korea, was the first geostationary ocean color observation satellite and was operational from April 1, 2011 to March 31, 2021. Over ten years, GOCI has observed oceans, coastal waters, and inland waters within its 2,500 km×2,500 km target area centered on the Korean Peninsula. The most attractive feature of GOCI, compared with other commonly used watercolor sensors, was its high temporal resolution (1h, eight times daily from 0 UTC to 7 UTC), providing the opportunity to monitor the quality of ICWs, where optical properties can change rapidly throughout the day. This systematic review aims to comprehensively review GOCI features and applications in ICWs, analyzing progress in atmospheric correction algorithms and water quality monitoring. Analyzing 123 articles from the Web of Science and China National Knowledge Infrastructure (CNKI) through a bibliometric quantitative approach, we examined GOCI’s strength and performance with different processing methods. These articles reveal that GOCI played an essential role in monitoring the ecological health of ICWs in its observation area in East Asia. GOCI has led the way to a new era of geostationary ocean satellites, providing new technical means for monitoring water quality in oceans, coastal zones, and inland lakes. We also discuss the challenges encountered by geostationary satellites in monitoring water quality and provide suggestions for improvements.

To understand how the thinning strategies impacts on wood quality and quantity for different purposes is of interest, considering that the management of plantations is carried out with parameters that have yet to be validated for different growth conditions. This work evaluated contrasting thinning regimes applied early at two moments of the crop cycle. With an initial population of 840 trees.ha-1, two thinning with populations ranging from 700 to 400, and from 400 to 100 trees.ha-1 were applied at 1.5 and 7.3 years, respectively. Growth analyses were carried out from the ages of 1.5 to 20.8 years considering: total height, diameter at breast height, individual volume, total and commercial volume per hectare, mean annual increase and current annual increase. At final age, contrasting populations of 100, 250 and 400 trees.ha-1 were sampled to assess wood density, and mechanical properties (bending and compression on small scale clear samples). The values of individual growth and wood properties are related to a Stand Density Index to understand the effect of competition on those values. The results allow us to identify the thinning schemes that record the most significant individual and per-hectare growth (both in thinning and clear felling) and the optimal harvest time under specific growth conditions. We assessed the proportions of commercial logs for sawmill and pulp uses, providing valuable inputs for a subsequent economic analysis of thinning regimes seeking for the most convenient combination of wood products. Wood's physical and mechanical properties assessed were barely affected by contrasting levels of competition between trees, therefore the decision of the silvicultural system to implement will depend on production and economic criteria.

Quality of life (QoL) focuses on a person’s ability to live a fulfilling life. In the elderly population, it helps in determining successful aging. Because of a scarcity of information regarding predictors of QoL in the elderly population in developing countries, this study was undertaken to assess the overall QoL and its predictors in the elderly population in an urban setting of Bangladesh. In this cross-sectional study, 275 participants were enrolled by systematic sampling at the outpatient department of a tertiary care hospital in Dhaka, Bangladesh. Data were collected by using a pretested semi-structured standard questionnaire for QoL (OPQOL-35). Pearson’s correlation was used to assess the association between QoL and sociodemographic factors. The Chi-square test was done for assessing the statistical significance between categorical variables. Multivariate linear regression was conducted to identify predictors of QoL, after controlling for potential confounders. The median age of the participants (n = 275) was 65 years (range, 60 to 85; 25th and 75th percentile, 60 and 68, respectively). The majority (78%) of them were married and 20% were widowed or divorced. The median score of QoL was 113 (25th and 75th percentile, 101 and 124, respectively). Most of the participants had a very poor (bad as can be) or poor (bad) QoL. Only 7.3% were observed to have “good” QoL (scores 140 or more). Females had significantly poorer QoL scores compared to males (p = 0.01). Educational status, marital status, body mass index and sleep duration significantly predicted QoL in a multiple regression analysis. In conclusion, the QoL of the elderly individuals in Bangladesh was very poor or poor. Future research should focus on service-oriented interventions, especially targeting women. Counseling of elderly people for enhancing their quality of life may include improving sleep patterns, healthy diets, regular exercise, and caring for their mental health.