In this study, our goal was to research land-use change by combining spatio–temporal land use/land cover monitoring (LULC (1989–2019) and urban growth modeling (1999–2039) in Benslimane, Morocco, to determine the effect of urban growth on different groups based on cellular automata (CA) and geospatial methods. A further goal was to test the reliability of the AC algorithm for urban expansion modeling. To do this, four years of satellite data were used at the same time as population density, downtown distance, slope, and ground road distance. The LULC satellite reported a rise of 3.8 km2 (318% variation) during 1989–2019. Spatial transformation analysis reveals a good classification similarity ranging from 89% to 91% with the main component analysis (PCA) technique. The statistical accuracy between the satellite scale and the replicated built region of 2019 gave 97.23 %t of the confusion matrix overall accuracy, and the region under the receiver operational characteristics (ROC) curve to 0.94, suggesting the model's high accuracy. Although the constructed area remains low relative to the total area of the municipality's territory, the LULC project shows that the urban area will extend to 5,044 km2 in 2019, principally in the western and southwestern sections. In 2019–2039, urban development is expected to lead to a transformation of the other class (loss of 1,364 km2), followed by vegetation cover (loss of 0.345 km2). In spatial modeling and statistical calculations, the GDAL and NumPy Python 3.8 libraries were successful.

The aim of this paper is to analyze the five grand parks in Dubai, United Arab Emirates (UAE) and provide a geoprocessing approach to different aspects such as sport, health, leisure, recreation, and public wellbeing. The study uses a hybrid of qualitative and quantitative approach as methodology. Sustainability offerings, accessibility for people of determination and special needs, typology and the geolocations of the grand parks plays crucial role in residents’ wellbeing. The paper concludes with recommendations for Dubai government to design new and innovative approaches to manage wellbeing of urban public places into the leisure environment for residents.

The recent growth of high-resolution spatial data, especially in developing urban environments, is enabling new approaches to civic activism, urban planning and the provision of services necessary for sustainable development. A special area of great potential and urgent need deals with urban expansion through informal settlements (slums). These neighborhoods are too often characterized by a lack of connections, both physical and socioeconomic, with detrimental effects to residents and their cities. Here, we show how a scalable computational approach based on the topological properties of digital maps can identify local infrastructural deficits and propose context-appropriate minimal solutions. We analyze 1 terabyte of OpenStreetMap (OSM) crowdsourced data to create worldwide indices of street block accessibility and local cadastral maps and propose infrastructure extensions with a focus on 120 Low and Middle Income Countries (LMIC) in the Global South. We illustrate how the lack of physical accessibility can be identified in detail, how the complexity and costs of solutions can be assessed and how detailed spatial proposals are generated. We discuss how these diagnostics and solutions provide a multiscalar set of new capabilities – from individual neighborhoods to global regions – that can coordinate local community knowledge with political agency, technical capability, and further research.

This is study follows environmental diversity assessment for geotourism development in Asir region. Geotourism seeks to supporting the tourism landscape in its interaction with the historical and archaeological, architectural or immaterial heritage, and requires diversification in terms of product, market and geographical potential. The study is based on various tourist facades and environmental diversity in Asir. As tourism development is a comprehensive undertaking involving many sectors, and these are the challenges to which the country’s tourism industry should respond to promote domestic tourism. quality and spatial pattern of tourism resources, climate comfort, and natural disaster possibility. Based on analyze multi-source datasets collected, geomorphological features of this area, we created a GIS database comprising geologic and topographic maps, and satellite images using these datasets. The findings of the study provided valuable insights into the role of environmental diversity in achieving tourism. The study examined the interrelationship between tourism and environmental diversity.

Land suitability analysis is a basic premise for allocating specific land for specific purpose. The objective of this study was to predict the suitable sites for cultivating Moringa oleifera tree in Ethiopia using Spatial Analytic Hierarchy Process. Findings of this study will have paramount significance in supporting decision making in the agroforestry development sector. This study employs Spatial Analytic Hierarchy Process and Geographic Information System to generate valuable information in land allocation for moringa oleifera tree production. Climate, topography, soil type and land use parameters were evaluated for suitability analysis. The results of the study revealed that most of the central part of the country are categorized as moderately suitable for the production of moringa oleifera tree. Areas classified as highly suitable are distributed along the borders of southern and western part of the country. However, some of the central part was classified as not suitable for Moringa oleifera tree production. This paper tried to investigate analysis of spatial data to predict suitable site for moringa tree production at national level. At national level, highly suitable, moderately suitable, and not suitable class covers an area of 308,508.2, 1,628,930.8 and 59891.3 Square Kilometer respectively.

COVID-19 pandemic event requires a rapid response from various organizations at the international and national levels. One important response is the provision of information sharing facilities and monitoring of the spread of cases around the world, JHU CSSE developed the Dashboard in January 2020 and followed by WHO the same month for the WHO COVID-19 dashboard. Both dashboards have distributed information as expected by the user with their respective pros and cons. JHU CSSE Dashboard provides faster information with good access to mobile device users even though the display and color selection are less attractive. Information on the WHO COVID-19 Dashboard is often late but more data appearances and variations and comparisons between countries can be made. In the Indonesian context, ESSC for COVID-19 Geoportal as Esri Indonesia initiative has been developed with the support of data and information from various parties and developed with the principles of big data management which are fully supported by adequate spatial portal developer software from Esri. Particularly in Indonesia, there is not yet an adequate system to support spatial based decision making at the local level, therefore the development of a GIS dashboard to support provincial and district governments is highly recommended.

Transportation of goods is as old as human civilizations : past networks and their evolution shed light on long term trends. Transportation impact on climate change is measured as major, as well as the impact on spreading a pandemic. These two reasons motivate the importance of providing relevant and reliable historical geographic datasets of these networks. This paper focuses on reconstructing the railway network in France at its maximal extent, a century ago. The active stations and lines are well documented by the French SNCF, in open public data. However, that information ignores past stations (ante 1980), which represent probably more than what is recorded in public data. Additional open data, individual or collaborative (eg. Wikipedia) are particularly valuable, but they are not always geo-coded, and two more sources are necessary to completing that geo-coding: ancient maps and aerial photography. Therefore, remote sensing and volunteer geographic information are the two pillars of past railway reconstruction. The methods developed are adapted to the extraction of information from these sources: automated parsing of Wikipedia Infoboxes, data extraction from simple tables, even from simple text. That series of sparse procedures can be merged into a comprehensive computer-assisted process. Beyond this, a huge effort in quality control is necessary when merging these data: automated wherever possible, or finally visually controlled by observation of remote sensing information. The main output is a reliable dataset, under ODbl, of more than 9100 stations, which can be combined with the information about the 35000 communes of France, for a large variety of studies. This work demonstrates two thesis: (a) it is possible to reconstruct transport network data from the past, and generic computer assisted methods can be developed; (b) the value of remote sensing and volunteered geo info is considerable (what archeologists already know).

Failaka Island is located 20 kilometers east of the Kuwait mainland. The island includes archaeological sites dating back to the Bronze, Hellenistic, Christian, and Islamic ages. To develop the island as a tourist attraction the state is pursuing a new urban plan based on the island's environmental potential. This study is the basis of the urban plan depends on environmental criteria from the view of Geoarchaeology. The study analysis the land-use and land-cover changes of Failaka Island between 1958- 2018. It provides a topographic survey of the island's coastline and a classification of its geomorphological features and a state of the art identification of its archaeological sites by using a drone to make a terrain model. The study used a medium to high-resolution image analysis of the land-use and land-cover changes: WorldView2-50cm 2010 and 2018; Landsat 8; aerial photography; Drone images and a digital elevation model (DEM), to analysis the expected sea level changes by the end of this century. This study also created a geodatabase of the island that can be adapted for future studies. The results emphasize the importance of preserving the historical and ecological features of the island while developing its infrastructure.

Failaka Island, located in the far east of Kuwait Bay, is about 20 km from the State of Kuwait’s coast, and represents a focal point for regional geography and history, with pristine beaches and archaeological sites dating to the Bronze, Iron, Hellenistic, Christian and Islamic periods. According to environmental data and in coordination with local authorities to develop an urban plan, the island is set to become the first tourist destination for the State of Kuwait. To achieve the Vision of Kuwait 2035, one of the planning objectives focuses around Urban Planning for the Establishment of Environmental Cities that Achieve (UPEECA) environmental sustainability criteria. The paper then, aims to propose the environmental urban plan for Failaka Island. Based around Environmental Analytical Hierarchical Processes (EAHP), and using the Field Calculator and ModelBuilder functions in ArcGIS, this research centres on the feasibility of carrying out an urban plan using suitability modelling that includes four factors and 13 criteria covering the island’s ecological and human composition. This study utilizes both remote sensing (UAVs for 3D imaging) and field study (ground truthing) to identify changes in land use and land cover – such as using sample analysis of the historical sites and soils for tracing evidence and creating/updating a soil map – and create the first GIS database for the island that can lead to generating a suitability model.

House is the haven that keeps people from natural and human conditions, it gives them trust, safety, and steadiness. It is one of the most basic human needs this became a serious function which cities offer, and became one of the most important aspects which caught urban researchers interest, they take into consideration a wide range of architectural, social, and economic indicators. The study aims to provide an overall conception of Rwandz residential functions, using a collection of parameters and some GIS and statistical techniques, to help establish plans and future projects to improve the growth of this city and other towns and cities in that area. The study found that the old parts of Rwandz city which are located in the core, differ from the outer parts which are relatively newer in many properties, generally, the core is more densely populated than the outer, bigger family size, more illiteracy, and unemployment, few incomes, older houses, smaller houses, in the opposite of the outer parts. Besides, the study tested the correlation coefficient between the criteria; it found some strong statistical relationships between them, which reflected some real-life properties of the residential function. Lastly, the study designed a regression model to predict the main residential function criteria.

Solar3D is an open-source software application designed to interactively calculate solar irradiation at three-dimensional (3D) surfaces in a virtual environment constructed with combinations of 3D city models, digital elevation models (DEMs), digital surface models (DSMs) and feature layers. The GRASS GIS r.sun solar radiation model computes solar irradiation based on two-dimensional (2D) raster maps for given day, latitude, surface and atmospheric conditions. With the increasing availability of 3D city models and demand for solar energy, there is an urgent need for better tools to computes solar radiation directly with 3D city models. Solar3D extends GRASS GIS r.sun from 2D to 3D by feeding the model with input, including surface slope, aspect and time-resolved shading, that is derived directly from the 3D scene using computer graphics techniques. To summarize, Solar3D offers several new features which, as a whole, distinguish itself from existing 3D solar irradiation tools: (1) the ability to consume massive heterogeneous 3D city models, including massive 3D city models such as oblique airborne photogrammetry-based 3D city models (OAP3Ds or integrated meshes); (2) the ability to perform near real-time pointwise calculation for duration from daily to annual; (3) the ability to integrate and interactively explore large-scale heterogeneous geospatial data. (4) the ability to calculate solar irradiation at arbitrary surface positions including at rooftops, facades and the ground. Solar3D is publicly available at https://github.com/jian9695/Solar3D.

Abstract Background: The highest incidence rate of covid-19 in Iran was reported from Shahroud County. This study was conducted by geographic information systems (GIS) to determine the geographical distribution of Covid-19 in 60 days. Study design: A cross-sectional study Methods: This study was conducted in counties covered by Shahroud University of Medical Sciences, namely Shahroud and Mayami, from February 20, 2020 to April 18, 2020. The GIS can better show the spread of epidemics. This software indicates geographical distribution of disease spread and is very helpful in controlling the epidemics. Therefore, maps of spatial distribution and risk of infection to COVID-19 were prepared in different regions of Shahroud county using Arc-GIS software to better implement health policies. Results: During this sixty-day period, 529 confirmed cases were detected, of which 51% were men and the average age was 55 years. The maps showed high-risk to risk-free regions. Shahroud and Bastam cities were known as the coronavirus hot spots. The eastern region of Shahroud has the highest number of cases but some high risk areas are spread throughout the Shahroud city due to high infectivity of virus. Risk-based time maps indicated a reduction in the risk of infection at the end of the research period due to some mitigation and suppression strategies. Conclusions: Shahroud and Bastam are the most dangerous cities that, the number of patients and dissemination has decreased over time because of tracking definite patients and people in contact with them and implementation of preventive care.

This short note proposes a national Geographic Information System (GIS) - based health infrastructure to deal with epidemics and pandemics. Currently, there is no pan-India health infrastructure available that can compile, update, and report the spread of epidemic diseases. It not only curtails the opportunity of finding the real-time data on the spatial distribution of a disease but prevents one to inquire into the causes of the disease through epidemiological analysis. The proposed infrastructure in this study is a pan-India one and can broadly be divided into two parts, hotspot mapping and accessibility to services. In the first part, hospitals are proposed to act as nodes of data collection, sending data to a national GIS portal. This portal shall have the capabilities of plotting the data using map rendering services such as Google and Bing Maps. This way, hotspots can be visualized in no time, benefitting the government and common citizenry alike. The second part deals with the accessibility of citizenry to a wide range of services, i.e., healthcare services, grocery outlets, emergency services, baby food, and many other essential services of the day to day life. In order to implement this, we propose that the government need to enforce a mandatory submission of locational coordinates of all Goods and Services Tax (GST) enrolled service providers. Once the coordinates are submitted, the government can effectively control the opening and closing of services and inform the citizenry at the same time. The proposed infrastructure is going to help deal with the extraordinary situations during epidemic and pandemics similar to what the world is currently facing in the form of Corona Virus Disease 2019 (COVID-19). Furthermore, the infrastructure can be scaled up or down as per the spread of a disease. The health-GIS platform proposed in this concept paper, shall help India in controlling and managing the epidemic more efficiently.

The epidemic of Coronavirus Disease 2019 (COVID-19) have affected all the regions of the world, nevertheless, in some countries there is a lack of studies on its main clinical and epidemiological features. We analyzed the incidence, incidence rates, and evolution of COVID-19 cases in Honduras from February 18-April 24, 2020.Methods: Using daily epidemiological data from surveillance about COVID-19 in Honduras, we calculated the rates of incidence (cases/100,000 population), and developed at national, departmental, and municipal levels GIS-based maps.Results: February 18 - April 24, 2020, a sum of 3,169 suspected COVID-19 cases have been assessed by RT-PCR, 533 (16.8%) of them were positive, for an incidence rate of 5.73 cases/100,000 pop. The highest peak was reached on March 31 (48 cases). The department with the highest number of cases and incidence rate was Cortes (383 cases, 71.9% of the total, 21.45 cases/100,000 pop). Discussion: The pattern and evolution of COVID-19 epidemic in Honduras has been particularly focused in the major urban areas, San Pedro Sula and Tegucigalpa, the capital city. Studies using geographical information systems linked with clinical disease characteristics are necessary to attain accurate epidemiological data for public health systems. Such information is also useful for assessment of the evolution of the pandemic and monitoring interventions.

Growing potato demands considerable external inputs of pesticides due to its susceptibility to various pests and pathogens. Here we present an attempt to differentiate the Slovak rural landscape with respect to the possibility of effective potato cultivation and to characterise soil parameters of current potato cultivation areas with the aim to increase the sustainability of the potato production. The selection was based on soil climatic, production and economic parameters. By using the GIS tools and existing databases on soil characteristics in Slovakia, maps of soil suitability categories for potato cultivation were generated. In Slovakia, it was found that 12.3% of farmland is very suitable for potato cultivation and that as much as 43.1% is not suitable. Later the specified categories were characterised in detail and specified with respect to geographic, soil, climatic, production and economic parameters. Currently, most potato crops are cultivated on Eutric Cambisols (27%), Chernozems (20%) and Mollic Fluvisols (18%). Loamy soils (65%), soils without gravel (62%), deep soils (74%) and soil situated on plains (55%) are dominant in these regions. We suggest that potato cultivation should be concentrated on the most suitable areas, thereby increasing the economic profitability, improving the ecological stability of the country and supporting the sustainability of the agriculture.

Precipitation is a crucial driver for many environmental processes and weather radars are capable of providing precipitation information with high spatial and temporal resolution. However, radar-based quantitative precipitation estimates (QPE) are also subject to various potential uncertainties. This study explores the development, uncertainties and potentials of the hourly operational German radar-based and gauge-adjusted QPE called RADOLAN and its reanalysed radar climatology dataset named RADKLIM in comparison to ground-truth rain gauge data. The precipitation datasets are statistically analysed across various time scales ranging from annual and seasonal aggregations to hourly rainfall intensities in regard to their capability to map long-term precipitation distribution, to detect low intensity rainfall and to capture heavy rainfall. Moreover, the impacts of season, orography and distance from the radar on long-term precipitation sums are examined in order to evaluate dataset performance and to describe inherent biases. Results revealed that both radar products tend to underestimate total precipitation sums and particularly high intensity rainfall. But our analyses also showed significant improvements throughout the RADOLAN time series as well as major advances through the climatologic reanalysis regarding the correction of typical radar artefacts, orographic and winter precipitation as well as range-dependent attenuation.

Merchant marine fleet is under inspections by several parties to ensure maritime regulation compliance. One of the major effects on implementation of regulations by International Maritime Organization (IMO) is indeed Port State Control. This article aims to analyze Paris Memoranda of Understanding (MOU) all detention remarks from 2013 to 2019 for EU15 countries (except Luxemburg and Austria) through an approach based on Analytical Hierarchy Process and demonstrate the results on Geographic Information System (GIS) to guide marine industry on detainable Port State Control remarks and country risk profile. While Analytical Hierarchy Process Approach has been used to indicate the ranking of basic maritime regulations from the perspective of the port state control , GIS help us to demonstrate the regional dispersion amongst EU15. The data of the detained vessel taken from the public website of Paris MOU and each report considered as a professional judgement that causes detention. It has been shown that almost all countries top priorities for regulation are Safety of Life at Sea (SOLAS) and Fire Safety Systems (FSS). Consequently, the results of the study can assist Port State Officers, ship crew, ship owners and managers presenting the facts of their inspection and able to improve themselves. The spatial analysis also expected to guide ship owners and managers to focus their vessel’s deficiencies to prevent sub-standardization.

Spatial planning processes generally consider three levels of planning, which are applied to three types of territory: state, county and city. As the coastal areas are of a significant natural, cultural, economic and social value, as well as are characterized by a diverse range of involved society with specific interests and needs, there is a necessity for an innovative and new approach to sustainable development planning in accordance with the modern age of growth, as well as to work with local communities in specific areas. Planning of a small populated area like village territory is more diverse and subject to the wishes and needs of the population. Small territory planning involves a very narrow circle of individuals or communities that identify spatial development needs for the future, including socio-economic, cultural, and environmental and climate change scenarios. In order to assess the development opportunities and needs of the area, it is necessary to monitor the area by regularly updating data. As it is well known, methodically derived data (facts) provide objectivity and transparency. Nowadays, when information about the present and the past is circulating very fast, it is possible to analyze the current situation, to forecast the future using databases, and to show several constructed realities (scenarios) using the geographic information system (GIS). Therefore, it is crucial to explore and find out the local needs-based planning approach to the development of village in coastal areas.

The sea level rise, a consequence of climate change, is one of the biggest challenges that countries and regions with coastal lowland areas will face in the medium term. This study proposes a methodology for assessing the vulnerability to sea level rise (SLR) on the Atlantic coast of Portugal mainland. Some scenarios of extreme sea level for different return periods and extreme flooding events were estimated for 2050 and 2100, as proposed by the European Union Directive 2007/60/EC. A set of physical parameters are considered for the multi-attribute analysis technique implemented by the Analytic Hierarchy Process, in order to define a Physical Vulnerability Index fundamental to assess coastal vulnerability. For each SLR scenario, coastal vulnerability maps, with spatial resolution of 20 m, are produced at national scale to identify areas most at risk of SLR, constituting key documents for triggering adaptation plans for such vulnerable regions. For 2050 and 2100, it is estimated 903 km² and 1146 km² of vulnerable area, respectively, being the district of Lisbon the most vulnerable district in both scenarios. Results are available through a Web Map Service, for Portuguese public entities, and through a web map viewer for public and communities in general.

Spatial Data Infrastructures (SDI) support the harvesting, curating, storage, and sharing of data along with providing access to development, analytic, and visualization tools that enable the building of innovative applications to address broad or specific challenges. SDIs can be especially powerful in bringing together data and tools supporting a particular theme – and this paper discusses and demonstrates the value of an SDI focused on Health. Many potential benefits of a Health SDI are proposed, and the case of supporting emergency response efforts is developed in detail. Leveraging a Health SDI, a Health Risk Index was created that provides emergency response personnel (both Emergency Operations Managers and Emergency Medical Responders) key insights into the unique health risks the impacted population faces due to the disaster. In order to establish the Health Risk Index, datasets from multiple national and global sources representing health data and social data that influences health outcomes – typically called social determinants of health – are harvested, merged, and republished to support further efforts at advancing the Health Risk Index. Visualizations of the Health Risk Index at the global, national, and sub-national levels down to the address level are presented along with demonstrations of its use.

In this paper we analyse spatial variation in Japanese dialectal lexicon by assembling a set of methodologies using theories in variationist linguistics and GIScience, and tools used in historical GIS. Based on historical dialect atlas data, we calculate a linguistic distance matrix across survey localities. The linguistic variation expressed through this distance is contrasted with several measurements, based on spatial distance, utilised to estimate language contact potential across Japan, historically and at present. Further, administrative boundaries are tested for their separation effect. Measuring aggregate association within linguistic variation can contrast previous notions of dialect area formation by detecting continua. Depending on local geographies in spatial subsets, great circle distance, travel distance and travel times explain a similar proportion of the variance in linguistic distance despite the limitations of the latter two. While they explain the majority, two further measurements estimating contact have lower explanatory power: least cost paths modelling contact before the industrial revolution, based on DEM and seafaring, and a linguistic influence index based on settlement hierarchy. Historical domain boundaries and present day prefecture boundaries are found to have a statistically significant effect on dialectal variation. However, the interplay of boundaries and distance is yet to be identified. We claim that a similar methodology can address spatial variation in other digital humanities, given a similar spatial and attribute granularity.

A community food environment plays an essential role in explaining the healthy life-style patterns of its community members. However, there is a lack of compelling quantitative approaches to evaluate these environments. This study introduces and validates a new tool named the Facility List Coder (FLC), whose purpose is to assess food environments based on data sources and classification algorithms. Using the case of Mataró (Spain), we randomly selected 301 grids areas (100 m2) where we conducted street audits in order to physically identify all the facilities by name, address and type. Then, audit-identified facilities were matched with those automatically-identified and were classified using the FLC in order to determine its quality. Our results suggest that automatically-identified and audit-identified food environments have a high level of agreement. The ICC estimates and their respective 95% confidence intervals for the overall sample, yield the result “excellent” (ICC ≥ 0.9) for the level of reliability of the FLC.

Meteorological drought indicators are commonly used for agricultural drought contingency planning in Ethiopia. Agricultural droughts arise due to soil moisture deficits. While these deficits may be caused by meteorological droughts, the timing and duration of agricultural droughts need not coincide with the onset of meteorological droughts due to soil moisture buffering. Similarly, agricultural droughts can persist even after the cessation of meteorological droughts due to delayed hydrologic processes. Understanding the relationship between meteorological and agricultural droughts is therefore crucial. An evaluation framework was developed to compare meteorological and agricultural droughts using a suite of exploratory and confirmatory tools. Receiver operator characteristics (ROC) was used to understand the covariation of meteorological and agricultural droughts. Comparisons were carried out between SPI-2, SPEI-2 and Palmer Z-index to assess intra-seasonal droughts and between SPI-6, SPEI-6 and PDSI for full-season evaluations. SPI was seen to correlate well with selected agricultural drought indicators but did not explain all the variability noted in agricultural droughts. The relationships between meteorological and agricultural droughts exhibited spatial variability which varied across indicators. SPI is better suited to predict non-agricultural drought states more so than agricultural drought states. Differences between agricultural and meteorological droughts must be accounted for better drought-preparedness planning.

Background: After serious epidemics of chikungunya (CHIKV) and Zika (ZIKV) in the Americas, dengue (DENV) have reemerged in most countries. We analyzed the incidence, incidence rates, and evolution of DENV cases in Honduras from 2015-2018 and the ongoing 2019 epidemic. Methods: Using epidemiological weeks (EW) surveillance data on the DENV in Honduras, we estimated incidence rates (cases/100,000 population), and developed maps at national, departmental, and municipal levels. Results: From 1 January 2016 to 21 July 2019, a total of 109,557 cases of DENV were reported, 28,603 in 2019, for an incidence rate of 312.32 cases/100,000 pop this year; 0.13% laboratory-confirmed. The highest peak was reached on the EW 28°, 2019 (5,299 cases; 57.89 cases/100,000 pop). The department with the highest number of cases and incidence rate was Cortes (8,404 cases, 479.68 cases/100,000 pop in 2019). Discussion: The pattern and evolution of DENV epidemic in 2019 in Honduras has been similar to that which occurred for in 2015. As previously reported, this epidemic involved the north and central areas of the country predominantly, reaching municipality incidences there >1,000 cases/100,000 pop (1%). Studies using geographical information systems linked with clinical disease characteristics are necessary to attain accurate epidemiological data for public health systems. Such information is also useful for assessment of risk for travelers who visit specific areas in a destination country.

Wetlands are one of the crucial natural resources. They provide invaluable biodiversity resources, aid in water quality improvement, support ground water recharge, help in moderating climate change and support flood control. Environment is in the other hand, where we live and something, we are very familiar with our day to day life. Geographic Information Systems (GIS), Remote Sensing and Global Positioning System (GPS) were a useful tool for wetland and environmental change analysis and to improve on the classification accuracy. This study investigates population and environmental change of Jarmet wetland and its surrounding area change analysis over the period of 1972 to 2015. The purpose of this study was to show land use/ land cover change of Jarmet wetland and its surrounding environment over years as a response to population growth. For this purpose, multi-temporal satellite imageries (Landsat MSS 1972, TM1986, ETM+ 2000, 2005 and 2015 and SRTM 2000) were obtained and used for LULC change analysis, elevation analysis and change detection analysis. ERDAS Imagine 2015, ARC GIS 10.5.1, Global Mapper11, ENVI 5.0 and DNR Garmin softwares were used to process the image data and accuracy assessment analysis. The result of LULC showed that there is spatial reduction in wetland, forest, Shrubland and grassland in the period of 43 years (1972-2015) by -1,722.8 ha, -296.2 ha, -1,718.7 ha and -661.9 ha respectively, due to increase in the farmland and plantation area as a response to overpopulation, lack of environmental policy implementation and irresponsible for natural resource degradation. The accuracy assessment of LULC change are done for recent satellite image showed the overall accuracy of 84.06% with Kappa index 75.19% this means this classification is accurately classified and handle greater than 75% of error. Finally, this study suggests that create strictly natural resource conservation law, stopping illegal expansion of farmland, educating society about the value of natural resource especially wetland and create a source of income for society rather than farming.

The purpose of this paper is to explore the presence of spatial and temporal effects on the calls for noise disturbance service reported to the Local Police of València (Spain) in the time period from 2014 to 2015, and investigate how some socio-demographic and environmental variables affect the noise phenomenon. The analysis is performed at the level of València's boroughs. It has been carried out using a logistic model after dichotomization of the noise incidents variable. The spatial effects consider first and second order neighbours. The temporal effects are included in the model by means of one and two weeks temporal lags. Our model confirms the presence of strong spatio-temporal effects. We also find significant associations between noise incidence and specific age groups, socio-economic status, land uses and recreational activities, among other variables. The results suggest that there is a problem of ``social'' noise in València that is not exclusively a consequence of coexistence between local residents. External factors such as the increasing number of people on the streets during weekend nights or during summer months increase severely the chances of expecting a noise incident.

Background: As the opioid epidemic continues, understanding the geospatial, temporal and demand patterns is important for policymakers to assign resources and interdict individual, organization, and country-level bad actors. Methods: GIS geospatial-temporal analysis and extreme-gradient boosted random forests evaluate ICD-10 F11 opioid-related admissions and admission rates using geospatial analysis, demand analysis, and explanatory models, respectively. The period of analysis was January 2016 through September 2018. Results: The analysis shows existing high opioid admissions in Chicago and New Jersey with emerging areas in Atlanta, Salt Lake City, Phoenix, and Las Vegas. High rates of admission (claims per 10,000 population) exist in the Appalachian area and on the Northeastern seaboard. Explanatory models suggest that hospital overall workload and financial variables might be used for allocating opioid-related treatment funds effectively. Gradient-boosted random forest models accounted for 87.8% of the variability of claims on blinded 20% test data. Conclusions: Based on the GIS analysis, opioid admissions appear to have spread geographically, while higher frequency rates are still found in some regions. Interdiction efforts require demand-analysis such as that provided in this study to allocate scarce resources for supply-side and demand-side interdiction: prevention, treatment, and enforcement. Based on GIS analysis, the opioid epidemic is likely to spread or diffuse through the country, and interdiction efforts require demand-analysis such as that provided in this study to allocate scarce resources for supply-side and demand-side interdiction: prevention, treatment, and enforcement.

Portugal Mainland has hundreds of thousands of people living in the Atlantic coastal zone, with numerous high economic value activities and a high number of infrastructures that must be protected from natural coastal hazard, namely extreme storms and sea level rise (SLR). In the context of climate change adaptation strategies, a reliable and accurate assessment of the physical vulnerability to SLR is crucial. This study is a contribution to the implementation of flooding standards imposed by the European Directive 2007/60/EC, which requires each member state to assess the risk associated to SLR and floods caused by extreme events. Therefore, coastal hazard in the Continental Atlantic coast of Portugal Mainland was evaluated for 2025, 2050 and 2100 in the whole coastal extension with different sea level scenarios for different extreme event return periods and due to SLR. A coastal flooding probabilistic map was produced based on the developed methodology using Geographic Information Systems (GIS) technology. The Extreme Flood Hazard Index (EFHI) was determined on flood probabilistic bases through five probability intervals of 20% of amplitude. For a given SLR scenario, the EFHI is expressed, on the probabilistic flooding maps for an extreme tidal maximum level, by five hazard classes ranging from 1 (Very Low) to 5 (Extreme).

The assessment of rockfall risks on human activities and infrastructure is of great importance. Rock falls pose a significant risk to a) transportation infrastructure b) inhabited areas and c) Cultural Heritage sites. The paper presents a method to assess rockfall susceptibility at national scale in Greece, using a simple rating approach and GIS techniques. An extensive inventory of rockfalls for the entire country was compiled for the period between 1935 and 2019. The rockfall events that were recorded are those, which have mainly occurred as distinct rockfall episodes in natural slopes and have impacted human activities, such as roads, inhabited areas and archaeological sites. Through a detailed analysis of the recorded data, it was possible to define the factors which determine the occurrence of rockfalls. Based on this analysis, the susceptibility zoning against rockfalls at national scale was prepared, using a simple rating approach and GIS techniques. The rockfall susceptibility zoning takes into account the following parameters: (a) the slope gradient, (b) the lithology, (c) the annual rainfall intensity, (d) the earthquake intensity and (e) the active fault presence. Emphasis was given on the study of the earthquake effect as a triggering mechanism of rockfalls. Finally, the temporal and spatial frequency of the recorded events and the impact of rockfalls on infrastructure assets and human activities in Greece were evaluated.

The authors introduce the GRASS GIS add-on module g.citation as an initial implementation of a fine-grained software citation concept. The module extends the existing citation capabilities of GRASS GIS, which until now only provide for automated citation of the software project as a whole, authored by the GRASS Development Team, without reference to individual persons. The functionalities of the new module enable individual code citation for each of the over 500 implemented functionalities, including add-on modules. Three different classes of citation output are provided in a variety human- and machine-readable formats. The implications of this reference implementation of scientific software citation for both for the GRASS GIS project and the OSGeo foundation are outlined.

Dogs are considered property under UK law, while current discourses of pet ownership place canine companions as part of an extended family. This means sentences for those who steal dogs are not reflective of a dogs’ sentience and agency, rather reflecting the same charges for those who steal a laptop or wallet. This is particularly problematic as dog theft is currently on the rise in England and Wales and led to public calls to change the law. Recognizing that a more robust analysis of dog theft crime statistics is required, we gathered dog theft data for 2015, 2016 and 2017 from 37 of 44 police forces through FOI requests. This paper uses this data to examine how dog theft crime statistics are constructed; assesses the strengths and weaknesses of this data; and categorizes, maps and measures dog theft changes temporally per police force in England and Wales. Our findings reveal there has been an increase in dog theft crimes, 1,294 in 2015, 1,525 in 2016 (+17.85%), and 1,678 in 2017 (+10.03%); and a decrease in court charges related to dog theft crimes, 62 (4.7%) in 2015, 48 (3.14%) in 2016, 37 (2.2%) in 2017. There were police force inconsistencies in recording dog theft crime which meant some data was unusable or could not be accessed or analysed. There is a need for a qualitative study to understand dog theft crime in different areas, and standardised approach to recording the theft of a dog by all forces across England and Wales.

The urbanisation phenomenon and related cities expansion and transport networks entail preventing the increase of population exposed to environmental pollution. Regarding noise exposure, the Environmental Noise Directive demands on main metropolis to produce noise maps. While based on standard methods, these latter are usually generated by proprietary software and require numerous input data concerning, for example, the buildings, land use, transportation network and traffic. The present work describes an open source implementation of a noise mapping tool fully implemented in a Geographic Information System compliant with the Open Geospatial Consortium standards. This integration makes easier at once the formatting and harvesting of noise model input data, cartographic rendering and output data linkage with population data. An application is given for a French city, which consists in estimating the impact of road traffic-related scenarios in terms of population exposure to noise levels both in relation to a threshold value and level classes.

Highway alignment is an essential part of the highway planning and design phase. Highways are impacted by existing projects and surrounding context. The isolation of geo-technical analysis from highway planning and design also delays the planning process. This study therefore proposes a model that integrates building information modelling (BIM) and geographic information science (GIS) capabilities to facilitate the planning and design process. Semantic web technologies are used to integrate BIM and GIS data on a semantic level. The proposed model also helps to identify geohazards by providing geological analysis. The visualization of the proposed project can help reduce design errors and miscommunication, which, in turn, reduces project risk. In addition, the model facilitates highway alignment optimization by incorporating visualization, simulation, and analysis into the planning and design phase. The proposed model provides future opportunities for project professionals to have organized, reliable and dynamic ways to manage the project during construction.

Background: Zika virus (ZIKV) infection has significantly affected Latin America in 2015–2017. Most studies have been reported from Brazil and Colombia, and only a few from Central America. For these reasons we analyzed the incidence, incidence rates and evolution of cases in Honduras from 2016–2017. Methods: Using epidemiological weeks (EW) surveillance data on the ZIKV epidemics in Honduras, we estimated incidence rates (cases/100,000 population), and developed maps at national, departmental and municipal levels. Results: From 1 January 2016 to 31 December 2017, a total of 32,607 cases of ZIKV were reported (98.5% in 2016 for an incidence rate of 36.85 cases/100,000 pop; 1% confirmed by RT-PCR). The highest peak was reached on the EW 6°, 2016 (2,559 cases; 29.34 cases/100,000 pop). The department with the highest number of cases and incidence rate was Cortés (13,128 cases, 791.08 cases/100,000 pop in 2016). Discussion: The pattern and evolution of ZIKV infection in Honduras has been similar to that which occurred for chikungunya in 2015. As previously reported, infection with chikungunya involved predominantly the central and capital area of the country, reaching incidences there >750 cases/100,000 pop. Studies using geographical information systems linked with clinical disease characteristics are necessary to attain accurate epidemiological data for public health systems. Such information is also useful for assessment of risk for travelers who visit specific areas in a destination country.

Geospatial Information Systems (GIS) can provide a great environment for using machine learning algorithm for spatial data such as satellite images. Integrating this functionality with artificial intelligence algorithms for analyzing spatial data enables us to predict challenging disasters such as deforestation. Deforestation as an environmental problems has been recorded the most serious threat to environmental diversity and one of the main components of land-use change. In this paper, we investigate spatial distribution of deforestation using artificial neural networks and satellite imagery. We modeled deforestation process using various factors in determining the relationship between deforestation and environmental and socioeconomic factors. Hence, for this purpose, the proximity to roads and habitats, fragmentation of the forest, height from sea level, slope, and soil type are considered in the model. In this research, we modeled land cover changes (forests) to predict deforestation using an artificial neural network due to its significant potential for the development of nonlinear complex models. The procedure involves image registration and error correction, image classification, preparing deforestation maps, determining layers, and designing a multi-layer neural network to predict deforestation. The satellite images for this study are of a region in Hong Kong which are captured from 2012 to 2016. The results of the study demonstrate that neural networks approach for predicting deforestation can be utilized and its outcomes show the areas that destroyed during the research period.

Coal combustion in thermal power plants releases ash. Ash is reported to cause different adverse health hazards in humans and other organisms. Owing to the presence of radionuclides, it is also considered as a potential radiation hazard. In this study, based on the surface radiation measurements and relevant ancillary data, expected radiation risk zones were identified with regard to the human population residing near the Thermal Power Plant. With population density as the risk determining criteria, about 20% of the study area was at ‘High’ risk and another 20% of the study area was at ‘Low’ risk zone. The remaining 60% was under medium risk zone. Based on the findings remedial measures which may be adopted have been suggested.

Human detection from Unmanned Aerial Vehicles (UAV) is gaining popularity in the field of disaster management, crowd counting, people monitoring. Real time human detection from UAV is a challenging task, because of many constraints involved. This study proposes a system for real time detection of humans on videos captured from UAVs addressing three of these constraints namely, flying height, computation time and scale of viewing. The proposed method integrated an android application with a binary classifier based on Haar-features to automatically detect human / non-human class from UAV images. The video frames were parsed and detected humans from image frames were geo-localized and visualized on Google Earth. The performance was evaluated for geo-localization accuracy, computation time and detection accuracy, considering human coverage – pixel size relationship for various heights and scale factor. Based on flying height - human size relationship and tradeoff between detection accuracy vs computation time, the study came up with optimal parameters for OpenCV’s cv2.cascadeClassifier. detectMultiScale function. This paper establishes a strong ground for further research relating to real time human detection from UAV.

Flash flooding, a hazard which is triggered by heavy rainfall is a major concern in many regions of the world often with devastating results in mountainous elevated regions. We adapted remote sensing modelling methods to analyse one flood in July 2015, and believe the process can be applicable to other regions in the world. The isolated thunderstorm rainfall occurred in the Chitral River Basin (CRB), which is fed by melting glaciers and snow from the highly elevated Hindu Kush Mountains (Tirick Mir peak’s elevation is 7708 m). The devastating cascade, or domino effect, resulted in a flash flood which destroyed many houses, roads, and bridges and washed out agricultural land. CRB had experienced devastating flood events in the past, but there was no hydraulic modelling and mapping zones available for the entire CRB region. That is why modelling analyses and predictions are important for disaster mitigation activities. For this flash flood event, we developed an integrated methodology for a regional scale flood model that integrates the Tropical Rainfall Measuring Mission (TRMM) satellite, Geographic Information System (GIS), hydrological (HEC-HMS) and hydraulic (HEC-RAS) modelling tools. We collected and use driver discharge and flood depth observation data for five river sub-stream areas, which were acquired in cooperation with the Aga Khan Rural Support Program (AKRSP) organization. This data was used for the model’s calibration and verification. This modelling methodology is applicable for other regional studies especially for rough mountainous areas which lack local observations and river discharge gauges. The results of flood modelling are useful for the development of a regional early flood warning system and flood mitigation in hazardous flood risk areas. The flood simulations and prepared connected video visualization can be used for local communities. This approach is applicable for flood mitigation strategies in other regions.

Land price sustainability issues have been addressed by many authors in the past. Most of these researchers used land prices (from land price maps) as the primary data source in their studies. Only a few papers analysed official land price maps, which are available very rarely. For this reason, we studied the spatial and temporal changes of land prices in the city of Olomouc based on an analysis of official land price maps from 1993 to 2017. We proposed several research hypotheses to confirm some general statements about land price development. We concluded that some macroeconomic indicators had a significant impact on changes in land prices. In the residential and commercial areas and historical centre, land prices are significantly higher than in other monitored aspects (land-use types). We also concluded that no link existed between land-use stability and land price stability. Surprisingly, no long-term stable areas were found in the area of interest. The analysis also confirmed that land price and its change over time varied in different spatial aspects. Surprisingly, the smallest influence was reflected in the economic aspect. Regarding natural events in recent decades, we observed a significant drop in land prices in the vicinity of watercourses threatened by flooding. These findings can assist in better understanding local development and changes in land price.

The city of Barcelona, ​​like other cities in the world, suffers strong internal socio-economic inequalities. Numerous works have sought to detect, quantify, characterize and / or map existing intra-urban differences, almost always based on quantitative methodologies. With this contribution, we intend to illuminate the complementary role that qualitative methodologies can play in studies on urban socio-environmental vulnerability. We consider aspects that are not quantifiable but that may be inherent to many such vulnerable spaces, both in the constructed environment and in the social ambit. These questions are considered through selected neighborhoods of Barcelona which have been shown (in prior works, mainly studies of quantitative manufacturing) to possess elements of vulnerability including a high presence of immigrants from less-developed countries, low per capita income, aging populations, or low educational levels. The results reveal the multidimensionality of vulnerability in the neighborhoods analyzed, as well as the essential complementarity among methodologies that detect and support possible public actions aimed at reducing or eliminating intra-urban inequalities.

We present a new unsupervised method aimed to obtain a partition of a complex urban system in homogenous urban areas, called urban contexts. The area of study is initially partitioned in microzones, homogeneous portion of the urban system, that are the atomic reference elements for the census data. With the contribution of domain experts, we identify the physical, morphological, environmental and socio-economic indicators need to identify synthetic characteristics of urban contexts and create the fuzzy rule set necessary to determine the type of urban context. We implement the set of spatial analysis processes necessary to calculate the indicators for microzone and apply a Mamdani fuzzy rule system to classify the microzones. Finally, the partition of the area of study in urban contexts is obtained by dissolving continuous microzones belonging to the same type of urban context. Tests are performed on the Municipality of Pozzuoli (Naples - Italy); the reliability of out model is measured by comparing the results with the ones obtained by detailed analysis.

El Niño is a quasi-periodic pattern of climate variability and extremes often associated with hazards and disease. While El Niño links to individual diseases have been examined, less is known about the cluster of multi-disease risk referred to as an ecosyndemic, which emerges during extreme events. The objective of this study was to explore a mapping approach to represent the spatial distribution of ecosyndemics in Piura, Peru at the district-level during the first few months of 1998. Using geographic information systems and multivariate analysis, two methodologies were employed to map disease overlap of 7 climate-sensitive diseases and construct an ecosyndemic index, which was then mapped and applied to another El Niño period as proof of concept. The main findings showed that many districts across Piura faced multi-disease risk over several weeks in the austral summer of 1998. The distribution of ecosyndemics were spatially clustered in western Piura among 11 districts. Furthermore, the ecosydemic index in 1998 when compared to 1983 showed a strong positive correlation, demonstrating the utility of the index. The study supports PAHO efforts to develop multi-disease based and interprogrammatic approaches to control and prevention, particularly for climate and poverty-related infections in Latin America and the Caribbean.

The province of Macerata, Italy, is a topographically complex region which has been little studied in terms of its temperature and precipitation climatology. Temperature data from 81 weather stations and precipitation data from 55 rain gauges were obtained, and, following quality control procedures, were investigated on the basis of 3 standard periods: 1931-1960, 1961-1990 and 1991-2014. Spatial and temporal variations in precipitation and temperature were analysed on the basis of six topographic variable (altitude, distance from the sea, latitude, distance from the closest river, aspect, and distance from the crest line). Of these, the relationship with altitude showed the strongest correlation. Use of GIS software allowed investigation of the most accurate way to present interpolations of these data and assessment of the differences between the 3 investigated periods. The results of the analyses permit a thorough evaluation of climate change spatially over the last 60 years. Generally, the amount of precipitation is diminished while the temperature is increased across the whole study area, but with significant variations within it. Temperature increased by 2 to 3°C in the central part of the study area, while near the coast and in the mountains the change is between about 0 and 1°C, with small decreases focused in the Appennine and foothill belt (-1 to 0°C). For precipitation, the decrease is fairly uniform across the study area (between about 0-200 mm), but with some isolated areas of strong increase (200-300 mm) and only few parts of territory in which there is an increase of 0-200 mm, mainly in the southern part of the coast, to the south-west and inland immediately behind the coast. The monthly temperature trend is characterized by a constant growth, while for precipitation there is a strong decrease in the amount measured in January, February and October (between 25 and 35 mm on average).

The interaction between different regions normally is reflected by the form of the stream. For example, the interaction of the flow of people and flow of information between different regions can reflect the structure of cities’ network, and also can reflect how the cities function and connect to each other. Since big data has become increasingly popular, it is much easier to acquire flow data for various types of individuals. Currently, it is a hot research topic to apply the regional interaction model, which is based on the summary level of individual flow data mining. So far, previous research on spatial interaction methods focused on point-to-point and area-to-area interaction patterns. However, there are a few scholars who study the hotspot interaction pattern between two regional groups with some predefined neighborhood relationship by starting with two regions. In this paper, a method for identifying a similar hotspot interaction pattern between two regional groups has been proposed, and the Geo-Information-Tupu methods are applied to visualize the interaction patterns. For an example of an empirical analysis, we discuss China’s air traffic flow data, so this method can be used to find and analyze any hotspot interaction patterns between regional groups with adjoining relationships across China. Our research results indicate that this method is efficient in identifying hotspot interaction flow patterns between regional groups. Moreover, it can be applied to any analysis of flow space that is used to excavate regional group hotspot interaction patterns.

It is widely acknowledged that the integration of BIM and GIS data is a crucial step forward for future 3D city modelling, but most of the research conducted so far has covered only the semantic aspects of GIS-BIM integration. We present here the results of the GeoBIM project, in which we tackled three integration problems focussing instead on aspects involving geometry processing: (i) the automated processing of complex architectural IFC models, (ii) the integration of existing GIS subsoil data in BIM, and (iii) the georeferencing of BIM models for their use in GIS software. All the problems have been studied using real world models and existing datasets made and used by practitioners in the Netherlands. For each problem, we expose in detail the issues we faced, our proposed solutions, and our recommendations for a more successful integration.

With the availability of wearable health monitoring sensor modules like 3-Lead Electrocardiogram (ECG), Pulse Oximeter (SpO2), Galvanic Skin Response (GSR), Hall effect sensor (for measuring Respiratory Rate), Blood Pressure and Temperature measuring and sensing elements, it has now become possible to device a composite health status monitoring kit that can measure vital signs and other physiological parameters pertaining to human health in real time. Traditionally, the physiological parameters along with vital signs related examination was possible only in a hospitalized or ambulatory environment, however due to advances in sensing and embedded system technology and miniaturization of data acquisition and processing elements health monitoring has become possible even when individuals remain engaged in their day to day activities at the convenience of space and location. The patients or individuals subject to monitoring may suffer from a traumatic experience due to their medical condition and may need emergent incidence response and the critical care team may have to prepare for the treatment only after the patient arrives, which often is too late, as in case of cardiac arrests or severe injuries. The research focused on real-time health status monitoring and trauma scoring using standard physiological parameters along with standard telemetry protocols to make the critical care team aware of an emergent situation and prepare for a medical emergency. Vital signs and physiological parameters (heart rate, temperature, respiratory rate, and blood pressure, SpO2) were measured in real time from human subjects non-invasively. In order to enable monitoring of the patients engaged in day to day activities, errors due to the motion were removed using stationary wavelet transform correction (correlation coefficient of 0.9 after correction) and signals from various sensors were denoised, filtered and were encoded in a format suitable for further data analysis. A composite sensor kit capable of monitoring vital signs and physiological parameters can be very useful in incident response when an individual undergoes a traumatic experience related to stroke, cardiac arrest, fits or even injury, as along with monitoring information the kit can calculate scores related to trauma like the Injury Severity Score (ISS), National Early Warning Signs (NEWS), Revised Trauma Score (RTS). Trauma Injury Severity Score (TRISS), Probability of Survival (Ps) score. An open access database of vital signs and physiological parameters from Physionet, MIMIC 2 Numerics (mimicdb/numerics) database was used to calculate NEWS and RTS and to generate correlation and regression models using the vital signs/physiological parameters for a clinical class of patients with respiratory failure and admitted to Intensive Care Unit (ICU). NEWS and RTS scores showed no significant correlation (r = 0.25, p<0.001) amongst themselves, however together NEWS and RTS showed significant correlation with Ps (blunt) (r = 0.70, p<0.001). RTS and Ps (blunt) scores showed some correlation (r = 0.63, p<0.001) and NEWS score showed significant correlation (r = 0.79, p<0.001) with Ps (blunt) scores. Furthermore, since individuals have to be monitored regardless of location, these kits have to have a built-in capability to locate the individual so that the incident response team can locate the individual based on Global Positioning System coordinates (GPS). A Quantum GIS (Geographical Information System) application using real-time GPS coordinates (OpenStreetMap coordinates) was used to calculate the shortest path using QGIS Network Analysis tool to demonstrate the calculation of shortest path and direction to locate the nearest service provider in shortest time. Along with locating the nearest healthcare service provider, it would help if the critical care team could be made aware of the physiological parameters and trauma scores using standard protocols accepted across the globe. The physiological parameters from the sensors along with the calculated trauma scores were encoded according to a standard Systematized Nomenclature of Medicine-Clinical Terms (SNOMED-CT) coding system and International Code of Diseases (ICD) codes and the trauma information was logged to Electronic Health Records (EHR) using Fast Health Interoperability Resources (FHIR) servers. FHIR servers provided interoperable web services to log the event information in real time. It could be concluded that analytical models trained on existing datasets can help in analyzing a traumatic experience or an injury and the information can be logged using a standard telemetry protocol as a telemedicine initiative. These scores enable the healthcare service providers to estimate the extent of trauma and prepare for medical emergency procedures and find applications in general and military healthcare.

On the occasion of Kynouria and in order to achieve the protection and projection of antiquities, a web-based model is proposed for highlighting individual monuments and archaeological sites, having in mind the historical and archaeological evidence of the region, the topography, the demographic profile and the tourist infrastructure, and combining them with the development programs for cultural routes. Therefore, creating suitable databases and mapping the monuments in the area are key prerequisites of the process, as they contribute to an objective assessment of the current situation and then to make rational decisions. In this frame, modern technology provides some important planning tools (GIS, GPS, and OMS) which allow recording and mapping of data, viewing the relationships between them in the area where they appear and managing their projection. The complete study of Kynouria’s archaeological routes contains the implementation of a website using free or open-source software, which should include all the necessary procedures and the historical and archaeological information material (text, maps, and photographs).

This study aims to put forth a new method to study the socio-spatial boundaries by using georeferenced community-authored reviews for restaurants. In this study, we show that food choice, drink choice, and restaurant ambience can be good indicators of socio-economic status of the ambient population in different neighborhoods. To this end, we use Yelp user reviews to distinguish different neighborhoods in terms of their food purchases and identify resultant boundaries in 10 North American metropolitan areas. This data-set includes restaurant reviews as well as a limited number of user check-ins and rating in those cities. We use Natural Language Processing (NLP) techniques to select a set of potential features pertaining to food, drink and ambience from Yelp user comments for each geolocated restaurant. We then select those features which determine one’s choice of restaurant and the rating that he/she provides for that restaurant. After identifying these features, we identify neighborhoods where similar taste is practiced. We show that neighborhoods identified through our method show statistically significant differences based on demographic factors such as income, racial composition, and education. We suggest that this method helps urban planners to understand the social dynamics of contemporary cities in absence of information on service-oriented cultural characteristics of urban communities.

The non-existence of a land ownership database in most of the developing countries moves the inhabitants to the occupation of public lands. Some of this situation are the origin to areas of informal housing, commerce and agriculture and in the end into new ​​informal settlements. Informal settlements become a serious problem in developing countries. The most common typology of informal settlements is that they are the population settled in public lands without any infrastructures and against the administrator's will. Thought this action the result in an uncontrolled land occupation process that promotes new informal areas without any proper built-up utilities, located in risk areas on the territory, barely ensuring the minimum requirements for a heaty living of the population and in various cases incentives to an informal economy. The process of build a cadastral map in informal settlement areas is a fundamental base to support the future transformation of illegal areas and to regulate the occupation of new subdivision planning and into the creation of new expansion areas. In this paper, it is presented a methodology developed to be applied to support a new register of land and to management. The transformation of informal settlement areas. The model to register the land tenure has been associated with allows the process application to multiple typology of informal settlements. The model to register land tenure has developed on a series of qualitative and quantitative data that determine the identification and classification of the buildings and its physical and functional description. The model was developed using Geographic Information System and with an initial survey of existing land titles of possession and public proposals to develop new expansion areas. A case study of the method is presented, where the land management model was implemented - Chã da Caldeiras in Ilha do Fogo an informal settlement in Cape Verde. The results are a great acceptance of the proposal by the population and local authorities and the starting of the implementation phase.

The latest developments in digital humanities have increasingly enabled the construction of large data sets which can easily be accessed and used. These data sets often contain indirect localisation information, such as historical addresses. Historical geocoding is the process of transforming the indirect localisation information to direct localisation that can be placed on a map, which enables spatial analysis and cross-referencing. Many efficient geocoders exist for current addresses, but they do not deal with temporal information and are usually based on a strict hierarchy (country, city, street, house number, etc.) that is hard, if not impossible, to use with historical data. Indeed, historical data are full of uncertainties (temporal, textual, positional accuracy, confidence in historical sources) that can not be ignored or entirely resolved. We propose an open source, open data, extensible solution for geocoding that is based on gazetteers composed of geohistorical objects extracted from historical topographical maps. Once the gazetteers are available, geocoding an historical address is a matter of finding the geohistorical object in the gazetteers that is the best match to the historical address searched by the user. The matching criteria are customisable and include several dimensions (fuzzy string, fuzzy temporal, level of detail, positional accuracy). As the goal is to facilitate historical work, we also propose web-based user interfaces that help geocode (one address or batch mode) and display over current or historical topographical maps, so that geocoding results can be checked and collaboratively edited. The system has been tested on the city of Paris, France, for the 19th and the 20th centuries. It shows high response rates and is fast enough to be used interactively.

The necessity to investigate suitable alternatives to conventional fossil fuels has developed the interests in many renewable energy alternatives, especially biomass resources which are widely available and allow to reach both environmental and socio-economic improvements. Among the bioenergy solutions the anaerobic digestion technology makes it possible to produce biogas by reusing and valorising agricultural residues and by-products. In Southern Italy, to date, the development of biogas sector is still very limited, despite the importance of the agricultural sector, especially of citrus and olive cultivation. For this reason, in previous studies the availability of two by-products, i.e., citrus pulp and olive pomace, was analysed in order to choose the most suitable area for a sustainable development of new biogas plants according to the new Biogasdoneright concept. In this paper, after a resume of the multi-step methodology which allowed the computation of biogas production, it was demonstrated that 15.9 GWh-e electricity and 24.5 GWh-e heat per year could be generate by reusing only these two kind of by-products, and could satisfy approximate 17% of the total electricity demand of the agricultural sector (90.2 GWh-e/year) in Catania.

Semantic Web technologies are being increasingly adopted by the geospatial community during last decade through the utilization of open standards for expressing and serving geospatial data. This was also dramatically assisted by an ever increasing access and usage of geographic mapping and location-based services via smart devices in people’s daily activities. In this paper we explore the developmental framework of a pure Javascript client-side GIS platform exclusively based on invocable geospatial Web services. We also extend Javascript utilization on the server side by deploying a node server acting as a bridge between open source WPS libraries and popular geoprocessing engines. The vehicle for such an exploration is a cross platform Web browser capable of interpreting Javascript commands to achieve interaction with geospatial providers. The tool is a generic Web interface providing capabilities of acquiring spatial datasets, composing layouts and applying geospatial processes. In an ideal form the end-user will have to identify those services, which satisfy a geo-related need and put them in the appropriate row. The final output may act as a potential collector of freely available geospatial web services. Its server-side components may exploit geospatial processing suppliers composing that way a light-weight fully transparent open Web GIS platform.

Groundwater is an important role of the environment in natural resources. The major sources of groundwater contamination in this study were open discharges of domestic sewage, inadequate sewerage system, open defecation, septic tanks, soak pits, contaminated water pools, unorganized solid waste dumping and use of fertilizers, pesticides for agriculture deteriorated the condition. In this present study revealed that the physical and chemical characteristics of ground water in different areas of Kannur district in Kerala have been determined different seasons with respect to its suitability for drinking and agricultural purposes. For this study the groundwater samples were collected during pre-monsoon and post-monsoon seasons from 70 wells representing the entire the study area. The groundwater samples were analyzed for Physico-chemical characteristics using standard techniques in laboratory and compared with standards. The samples were analyzed with reference to the WHO and BIS standards. The groundwater quality information of the entire study area have been prepared using statistical and GIS technique for all the parameters. This paper proved in GIS will be helpful for measuring, monitoring and managing the groundwater pollution in the study area and suggested to protect groundwater resources in the environment.

Biogenic emissions affect the urban air quality as they are ozone and SOA precursors and should be taken into account when applying photochemical pollution models. The present study presents an estimation of the magnitude of Non-Methane Volatile Organic Compounds emissions (NMVOCs) emitted by vegetation over Greece. The methodology is based on computation performed with the aid of a Geographic Information System (GIS) and theoretical equations in order to develop an emission inventory on a 6x6 spatial resolution, in a temporal resolution of 1hr covering one year (2016). For this purpose, a variety of input data was used: improved satellite land-use data, land-use specific emission potentials, foliar biomass densities, temperature and solar radiation data. Hourly, daily and annual isoprene, monoterpenes and other volatile organic compounds (OVOCs) were estimated. In the area under study, the annual biogenic emissions were estimated up to 472 kt, consisting of 46.6% isoprene, 28% monoterpenes and 25.4% OVOCs. Results delineate an annual cycle with increasing values from March to April, while maximum emissions were observed from May to September, followed by a decrease from October to January.

Cloudburst is one of the most devastating and frequently occurring natural hazardous events in Indian Himalayan region. Localized deep cumulus convective clouds have a capability of giving enormous amount of rainfall over a limited horizontal area, within a short span of time. Whenever, such events occur, lead to flash floods causing landslides, house collapses, dislocation of traffic, and human casualties on a large scale. Therefore, it is necessary to predict the cloudburst inundation zones accurately to avoid damage associated with them. For this, high resolution Digital Elevation Model generated from CartoSat-1 (Stereo pair) were integrated in MIKE 11 Hydrodynamic 1D model to generate longitudinal profile of the study area and to find water level, peak discharge, flow velocity, flow width at different reaches along the Asi ganga and Bhagirathi river, to know the Cloudburst flood inundation scenario. On 3^rd August 2012 one of the major Cloudburst event occurred in Asi Ganga Valley in Indian Himalayan region which was considered for simulation of hydrodynamic model. For a Cloudburst event, 100 mm/hr rainfall was considered for the simulation of the hydrodynamic model. It is observed that the discharge rise from 50 m³/s to 549.164 m³/s (an abrupt increase of about 10 times) within 1 hr at Sangamchetty in Asiganga river and at Joshiyara area rise from 600 m³/s to 3378.69 m³/s (an abrupt increase of about 5 times) within 4 hr in Bhagirathi river. Similarly the water level rises around 3 m and 6m in Asi Ganga and Bhagirathi rivers respectively. Flash Flood inundation areas due to Cloudburst on 3^rd August 2012 were demarcated from the simulation results in GIS environment.

This paper aims to investigate carbon monoxide (CO) concentrations on roadways of Karachi, potential blood levels carboxy-hemoglobin (COHb) in Karachi. Geographical information system (GIS) was used for spatial analysis of diseases potentiality while an interpolation technique has been applied for surface generation with town boundaries and later evaluates risk areas.The higher concentration of carbon monoxide in the ambient is mainly due to automobile emissions. The City center and CBD areas are more perilous.

Over the years, the Egyptian temples at Luxor city have been intensely investigated, but most of these studies just focused on the classical sides of the archaeological and historical descriptions. Many of the environmental problems are inevitable results of the unplanned urban crawling around the monuments temples. This paper aims at assessing the environmental changes around some temples of Luxor City using Remote sensing and GIS techniques. In particular, a historical database made up of Corona and Landsat TM data have been investigated along with the new acquisitions of Quickbird2 and Sentinel2. Results from our investigation highlighted rapid changes in urban and agricultural areas, which adversely affected the Egyptian monumental temples causing serious degradation phenomena. Using the information obtained from our RS&GIS based analysis, mitigation strategies have been also identified for supporting the preservation of the archaeological area.

Although floods, as well as other natural disasters, can be considered relevant causes of intra-generational inequalities, the frequent catastrophes and the resulting damages to territory reflect the generalized indifference about inter-generational justice. Societal concerns, such as land protection, typically involve the administrative system performing proactive policies in the perspective of inter-generational solidarity, but subsidiarity has made more and more independent the local communities. As a consequence, the attention toward the long run effects – typically concerning the territorial system, as a whole, at the geographical scale – has been dispersed, and the proactive policies coming from the central government has became more ineffective. Regarding the case of the flood happened in 2009 in the Fiumedinisi-Capo Peloro hydraulic basin, in the northeastern part of Sicily, Italy, we propose an economic valuation – carried out by performing the method of the imputed preferences – in order to compare the expenses incurred by the public authorities responsible for protecting the territory to the costs of the rehabilitation of the damaged areas. Some considerations about the economic significance of the proactive policies for the arrangement of territory are addressed according to the role played by the social discount rate in the inter-temporal economic calculation.

Satellite imagery has had limited application in the analysis of pre-colonial settlement archaeology in the Caribbean; visible evidence of wooden structures perishes quickly in tropical climates. Only slight topographic modifications remain, typically associated with middens. Nonetheless, surface scatters, as well as the soil characteristics they produce, can serve as quantifiable indicators of an archaeological site, which can be detected by analysis of remote sensing imagery. A variety of data sets were investigated, with the intention to combine multispectral bands to feed a direct detection algorithm, providing a semi-automatic process to cross-correlate the datasets. Sampling was done using locations of known sites, as well as areas with no archaeological evidence. The pre-processed very diverse remote sensing data sets have gone through a process of image registration. The algorithm was applied in the northwestern Dominican Republic on areas that included different types of environments, chosen for having sufficient imagery coverage, and a representative number of known locations of indigenous sites. The resulting maps present quantifiable statistical results of locations with similar pixel value combinations as the identified sites, indicating higher probability of archaeological evidence. The results show the variable potential of this method in diverse environments.

Wetlands are recognized as one of the world’s most valuable natural resources. With the increasing world population, human demands on wetland resources for agricultural expansion and urban development continue to increase. In addition, global climate change has pronounced impacts on wetland ecosystems through alterations in hydrological regimes. To better manage and conserve wetland resources, we need to know the distribution and extent of wetlands and monitor their dynamic changes. Wetland maps and inventories can provide crucial information for wetland conservation, restoration, and management. Geographic Information System (GIS) and remote sensing technologies have proven to be useful for mapping and monitoring wetland resources. Recent advances in geospatial technologies have greatly increased the availability of remotely sensed imagery with better and finer spatial, temporal, and spectral resolution. This chapter presents an introduction to the uses of GIS and remote sensing technologies for wetland mapping and monitoring. A case study is presented to demonstrate the use of high-resolution light detection and ranging (LiDAR) data and aerial photographs for mapping prairie potholes and surface hydrologic flow pathways.

Is the amount of “greenness” within a 250-meter, 500-meter, 1000-meter or a 2000-meter buffer surrounding a person’s home a good predictor of their physical health? The evidence is inconclusive. We reviewed Web of Science articles that used geographic information systems buffer analyses to identify trends between physical health, greenness, and distance within which greenness is measured. Our inclusion criteria were: (1) use of buffers to estimate residential greenness; (2) statistical analyses that calculated significance of the greenness-physical health relationship; and (3) peer-reviewed articles published in English between 2007 and 2017. To capture multiple findings from a single article, we selected our unit of inquiry as the analysis, not the article. Our final sample included 260 analyses in 47 articles. All aspects of the review were in accordance with PRISMA guidelines. Analyses were independently judged as more, less, or least likely to be biased based on the inclusion of objective health measures and income/education controls. We found evidence that larger buffer sizes, up to 2,000m, better predicted physical health than smaller ones. We recommend that future analyses use nested rather than overlapping buffers to evaluate to what extent greenness not immediately around a person’s home (i.e., within 1,000-2,000m) predicts physical health.

This study proposes a novel hybrid machine learning approach for modeling of rainfall-induced shallow landslides. The proposed approach is a combination of an instance-based learning algorithm (k-NN) and Rotation Forest (RF), state of the art machine techniques that have seldom explored for landslide modeling. The Lang Son city area (Vietnam) is selected as a case study. For this purpose, a spatial database for the study area was constructed, and then, was used to build and evaluate the hybrid model. Performance of the model was assessed using Receiver Operating Characteristic (ROC), area under the ROC curve (AUC), success rate and prediction rate, and several statistical evaluation metrics. The results showed that the model has high performance with both the training data (AUC = 0.948) and the validation data (AUC = 0.848). The results were compared with those obtained from soft computing techniques i.e. Random Forest, J48 Decision Trees, and Multilayer Perceptron Neural Networks. Overall, the performance of the proposed model is better than those obtained from the above methods. Therefore, the proposed model is a promising tool for landslide modeling. The research result can be highly useful for land use planning and management in landslide prone areas.

The European Commission has been striving to achieve sustainable development in its rural areas for more than 25 years through funds aimed at modernizing the agricultural and forestry sectors, protecting the environment and improving the quality of life. But is sustainable rural development really being accomplished? This study sets out to answer this question in the case of Extremadura, a Spanish territory with Low Demographic Density and a Gross Domestic Product still below 75 % of the European average. Both qualitative and quantitative methodology have been employed, using a Principal Component Analysis the result of which has provided us with a model which shows how various behaviors coexist in the region in view of the distribution of current funding from the EAFRD. The most dynamic areas have received the largest amounts of funding and these are linked to the agricultural sector and to the protection of the environment, leaving aside the more depressed areas and the implementation of the LEADER Approach as well. Therefore, we have come to the conclusion that the current rural development in Extremadura is not sustainable enough.

The experiences gathered during the past 30 years support the operational use of irrigation scheduling based on frequent multi-spectral image data. Currently, the operational use of dense time series of multispectral imagery at high spatial resolution makes monitoring of crop biophysical parameters feasible, capturing crop water use across the growing season, with suitable temporal and spatial resolutions. These achievements, and the availability of accurate forecasting of meteorological data, allow for precise predictions of crop water requirements with unprecedented spatial resolution. This information is greatly appreciated by the end users, i.e. professional farmers or decision-makers, and can be provided in an easy-to-use manner and in near-real-time by using the improvements achieved in web-GIS methodologies. This paper reviews the most operational and explored methods based on optical remote sensing for the assessment of crop water requirements, identifying strengths and weaknesses and proposing alternatives to advance towards full operational application of this methodology. In addition, we provide a general overview of the tools which facilitates co-creation and collaboration with stakeholders, paying special attention to these approaches based on web-GIS tools.

Web-Based GIS is a platform that deals with the representation, management and storage of locational information for real-time online retrieval, viewing and manipulations. Web-based GIS incorporate all the functions of information systems: gathering, storing, retrieving, visualizing and dissemination of spatial information on the Internet. In modern-day GIS serve as vital means to not only geo-referenced locational information that are been retrieved but also the development in web-based technologies as well as there involvements in decision making processes. In recent time the increased used of GIS on the Internet have totally transformed and made three distinct changes across our GIS environment. These are: (i) how are GIS data being accessed (ii) what are modes of its transmission and (iii) what available GIS functionalities are within the environment for analysis. This paper examines the applications and technologies associated with web-based GIS architectures with an emphasis on the internet GIS based structure and case studies of GIS Web-based applications in MapInfo, Microsoft Silverlight Technology and the ArcGIS Server using ArcGIS JavaScript API.