Currently, most deep learning methods cannot solve the problem of scarcity of industrial product defect samples and significant differences in characteristics. This paper proposes an unsupervised defect detection algorithm based on a reconstruction network, which is realized using only a large number of easily obtained defect-free sample data. The network includes two parts: image reconstruction and surface defect area detection. The reconstruction network is designed through a fully convolutional autoencoder with a lightweight structure. Only a small number of normal samples are used for training so that the reconstruction network can be A defect-free reconstructed image is generated. A function combining structural loss and L1 loss is proposed as the loss function of the reconstruction network to solve the problem of poor detection of irregular texture surface defects. Further, the residual of the reconstructed image and the image to be tested is used as the possible region of the defect, and conventional image operations can realize the location of the fault. The unsupervised defect detection algorithm of the proposed reconstruction network is used on multiple defect image sample sets. Compared with other similar algorithms, the results show that the unsupervised defect detection algorithm of the reconstructed network has strong robustness and accuracy.

Recombinant human collagen peptide (RCP) is a recombinantly created xeno-free biomaterial enriched in RGD (arginine-glycine-aspartic acid) sequences, with good processability that is being investigated for regenerative medicine applications. Recently, the biocompatibility and osteogenic ability of β-TCP/RCP (RCP granules combined with β-tricalcium phosphate (TCP) submicron particles) were demonstrated. In the present study, β-TCP/RCP was implanted into experimental periodontal tissue defects (three-walled bone defect) created in beagle dogs to investigate tissue responses and subsequent regenerative effects. Micro computed tomography image analysis at 8 weeks postoperatively showed that the amount of new bone after β-TCP/RCP graft was significantly greater (2.2 fold, P<0.05) than that of the control (no graft) group. Histological findings showed that the transplanted β-TCP/RCP induced active bone-like tissue formation including TRAP-positive and OCN-positive cells as well as bioabsorbability. Ankylosis did not occur, and periostin-positive periodontal ligament-like tissue formation was observed. Histological measurements revealed that β-TCP/RCP implantation formed 1.7-fold more bone-like tissue and 2.1-fold more periodontal ligament-like tissue than the control, and significantly suppressed gingival recession and epithelial downgrowth (P<0.05). These results suggest that β-TCP/RCP is effective as a periodontal tissue regenerative material.

Abstract: Objective: To assess both individual and interactive effects of prenatal medical conditions depression and Diabetes, and health behaviors including smoking during pregnancy on infant birth defects. Methods: The data for this research study were collected by the Pregnancy Risk Assessment Monitoring System (PRAMS) in 2018. Birth certificate records were used in each participating jurisdiction to select a sample representative of all women who delivered a live-born infant. Complex sampling weights were used to analyze the data with a weighted sample size of 4,536,867. Descriptive statistics were performed to explore frequencies of the independent and dependent variables. Bivariate and multivariable analyses were conducted to examine associations among the independent and dependent variables. Results: The results indicate and significant interaction between the variables smoking and Depression and Depression and Diabetes (OR= 3.17; p-value <0.001 and OR= 3.13; p-value <0.001 respectively). Depression during pregnancy was found to be strongly associated with delivering an infant with a birth defect (OR= 1.31, P-value < 0.001). Conclusion: Depression during pregnancy and its interaction with smoking and Diabetes are vital in determining birth defects in infants. The results indicate that birth defects in the United States can be lowering Depression in pregnant women.

Background and objectives: The impact of prenatal exposure to polycyclicaromatic 17 hydrocarbons (PAHs) on birth outcomes as weight, length, head circumference, placenta 18 weight, and Apgar. Materials and Methods: Two cohorts of children born in the years 2013 and 19 2014 in Karvina (Northern Moravia, N=144) and Ceske Budejovice (Southern Bohemia, 20 N=198), were studied for the relationship between the prenatal exposure to PAHs and growth 21 parameters up to two years of age. PAHs exposure was evaluated according to the concentration 22 of benzo[a]pyrene (B[a]P) in polluted air and monohydroxylated PAH metabolites (OH-PAHs) 23 in urine of newborns as well as their mothers. Data of growth parameters were obtained from 24 pediatric questionnaires up to 24 months. 25 Results: Concentrations of B[a]P were significantly higher in Karvina (p<0.001). OH-26 PAH metabolites were significantly higher in the mothers´ as well as in the newborns´ urine in 27 Karvina. The length was shorter in newborns in Karvina at birth (p<0.001), but this difference 28 was straightened out during next 3 to 24 months. Birth weight at the delivery did not differ 29 between newborns in Karvina and Ceske Budejovice. Newborns in both locations significantly 30 decreased their weight gain between birth and 3 months after delivery. OH-PAHs metabolites 31 in mother’s or newborn’s urine did not affect birth weight. Top 25% values of concentrations 32 of 2-OH-FLUO, 1-OH-NAP, 2-OH-NAP, 1-OH-PHEN, 2-OH-PHEN, 3-OH-PHEN, 4-OH-33 PHEN, and the sum of all-OH-PAHs higher than median in the newborns´ urine decreased their 34 length. 2-OH-PHEN top 25% of concentrations in the newborns´ urine decreased their head 35 circumference, 2-OH-FLUO, 1-OH-NAP, 2-OH-NAP, 1-OH-PHEN, 2-OH-PHEN, 3-OH-36 PHEN, 4-OH-PHEN, 9-OH-PHEN, 1-OH-PYR, and all-OH-PAHs decreased placenta weight; 37 2-OH-FLUO, 1-OH-NAP, 2-OH-NAP, 1-OH-PHEN, 2-OH-PHEN, 3-OH-PHEN, 4-OH-38 PHEN, and all-OH-PAHs decreased Apgar 5´. Conclusions: We observed that higher 39 concentration of PAHs determined as OH-PAHs metabolites in newborns´ urine decreased their 40 length, head circumference, placenta weight, and Apgar 5´, but did not affect birth weight.

Objective To Identify risk factors of perinatal complications amongst macrosomic babies in a reference hospital structure. Method We conducted a case-control institutional based study. Cases and controls of singleton livebirths were extracted from the maternity registry from January 2017 to December 2019 The case population consisted of mother and child macrosomic couples with perinatal complications. The control group consisted of couples without perinatal complications. Matching was done on age and sex. The main primary end point was the risk factors for complications. Data were analyzed using R, software version3.0 in adjusted and unadjusted analysis with p<0.05 threshold considered statistically significant. Results Out of 362 couples, we had 186 cases and 176 controls. Maternal age ≥30 years (p=0.024); non-screening for gestational diabetes (p=0.027); history of caesarean section (p=0.041); weight gain ≥16 kg (p<0.001); maternal HIV (p=0.047); birth weight ≥4500g (p=0.015) and birth height ≥ 52.7 ±1.7cm (p=0.026) were risk factors. Conclusion The delivery of a macrosomic baby remains problematic in this setting. The improvement of the maternal-fetal prognosis requires quality prenatal surveillance and management by a multidisciplinary perinatal team involving obstetricians, endocrinologist, and neonatal pediatricians.

To Identify risk factors of perinatal complications amongst macrosomic babies in a reference hospital structure.We conducted a case-control institutional based study. Cases and controls of singleton livebirths were extracted from the maternity registry from January 2017 to December 2019 The case population consisted of mother and child macrosomic couples with perinatal complications. The control group consisted of couples without perinatal complications. Matching was done on age and sex. The main primary end point was the risk factors for complications. Data were analyzed using R, software version3.0 in adjusted and unadjusted analysis with p<0.05 threshold considered statistically significant.Out of 362 couples, we had 186 cases and 176 controls. Maternal age ≥30 years (p=0.024); non-screening for gestational diabetes (p=0.027); history of caesarean section (p=0.041); weight gain ≥16 kg (p<0.001); maternal HIV (p=0.047); birth weight ≥4500g (p=0.015) and birth height ≥ 52.7 ±1.7cm (p=0.026) were risk factors. The delivery of a macrosomic baby remains problematic in this setting. The improvement of the maternal-fetal prognosis requires quality prenatal surveillance and management by a multidisciplinary perinatal team involving obstetricians, endocrinologists and neonatal pediatricians.

Preterm birth is a leading cause of infant morbidity and mortality in the world. In 2020, 1 in 10 infants were born prematurely in the United States. Globally, the World Health Or-ganization estimates 15 million infants are born prematurely. The efficacy of current ther-apeutic interventions for preterm birth have been called into question due to limited repli-cable success. Recent advancements in the field of nanomedicine have made it possible to utilize the vaginal administration route to effectively and locally deliver drugs to the fe-male reproductive tract. Also, studies using murine models have provided important in-sights about the cervix as a gatekeeper for pregnancy and parturition. It seems plausible that the field of reproductive biology is on the cusp of a paradigm shift in the context of treating preterm birth. The present review focuses on the complexities associated with treating the condition and novel therapeutics that have produced promising results in pre-clinical studies.

One in four adults in the US suffer from cartilage degeneration of the Intervertebral Disc (DDD) or load bearing joints (DJD). Combined DDD and DJD leads to billions of dollars in surgical health care costs annually. Since cartilage is avascular, it has a limited regenerative capacity. Conventional non-surgical treatment modalities provide brief symptomatic relief, have sided effects, and do not address the actual structural tissue defect in the cartilage itself. As such, new alternatives are needed. Perinatal tissue allografts have emerged as a novel frontier for bio-mechanical cartilage engineering research. Birth product-specific therapeutic roles and clinical outcomes are actively being investigated. The tissues of interest include umbilical cord-derived Wharton’s Jelly (WJ). This study assessed WJ tissue samples via ZEISS Supra 55VP Field-Emission Scanning Electron Microscope (SEM) at 100 and 300nm resolution scales. The captured images of pre and post-processed structural tissue matrices in WJ allografts were analyzed against themselves and peer-reviewed SEM images of articular cartilage, intervertebral disc cartilage, and muscle fascia. SEM images of post-processed WJ structural tissue matrices were analogous to structural tissue matrices in human articular cartilage, intervertebral disc cartilage, and muscle fascia. Relevant characteristics of pre- and post-processed structural tissue matrices in WJ allografts were comparable. This is the first study, that we are aware of, to utilize SEM to compare the pre-and post-processing relevant structural characteristics of WJ allografts and additionally demonstrate that structural collagen matrices in post-processed WJ allografts are analogous in structure to the cartilage in articular joints, intervertebral discs, and muscle fascia.

Objective: To determine the effect of birth season climate on adult total serum IgE (TSIgE) levels. Study design: The study is a retrospective chart review with the following inclusion criteria: TSIgE measurement, age ≥16, and northeastern Tennessee birthplace. Main outcome measures include TSIgE levels, birth season climatic conditions, and regional pollen-producing plant and pollen counts. Results: The records of 1,274 women (mean age 40.8 ± 17.5, age range 16-96) and 762 men (mean age 38.1 ± 17, age range 16-82) seen in our Allergy Clinic were reviewed. Persons born in the spring and summer, the seasons with the highest pollen counts and the most favorable climatic conditions for plant growth, had nearly twice the odds of having TSIgE levels >1σ above the mean of the study group when compared to those born in the fall or winter (odds ratio (OR) 1.75, 95% confidence interval (CI) 0.96-3.17 and OR 1.93, 95% CI 1.04-3.57, respectively); odds were highest for those born in March (OR 2.55, 95% CI 1.37-4.74) and July (OR 2.38, 95% CI 1.25-4.51) and lowest for those born in November (OR 0.11, 95% CI 0.0068-1.79). When averaged over the 95-years of study and five 30-year climate cycles TSIgE levels increased linearly as the seasons progressed from fall to summer (r²= 0.9475, P=0.0266). Of the climatic factors, TSIgE levels correlated most strongly with levels of precipitation (r²= 0.9145, P=0.0437). Conclusion: Climatic conditions that increase birth season exposure to environmental allergens may have a life-long effect on TSIgE production.

Urban trees are often more sun- and wind-exposed than their forest-grown counterparts. These environmental differences can impact how many species grow – impacting trunk taper, crown spread, branch architecture, and other aspects of tree form. Given these differences, windthrow models derived from traditional forest production data sources may not be appropriate for urban forest management. Additionally, visual abnormalities historically labeled as “defects” in timber production may not have a significant impact on tree failure potential. In this study, we look at urban tree failures associated with Hurricane Irma in Tampa, Florida, USA. We used spatial analysis to determine if patterns of failure existed among our inventoried trees. We also looked at risk assessment data to determine which visual defects were the most common and the most likely to be associated with branch or whole-tree failure. Results indicate that there was no spatial pattern associated with the observed tree failures – trees failed or withstood the storm as individuals. While some defects like decay and dead wood were associated with increased tree failure, other defects like weak branch unions and poor branch architecture were less problematic.

Granular superconductivity at high temperatures in graphite can emerge at certain two-dimensional (2D) stacking faults (SFs) between regions with twisted (around the c-axis) or untwisted crystalline regions with Bernal (ABA...) and/or rhombohedral (ABCABCA...) stacking order. One way to observe experimentally such 2D superconductivity is to measure the frozen magnetic flux produced by a permanent current loop that remains after removing an external magnetic field applied normal to the SFs. Magnetic force microscopy was used to localize and characterize such a permanent current path found in one natural graphite sample out of ∼50 measured graphite samples of different origins. The position of the current path drifts with time and roughly follows a logarithmic time dependence similar to the one for flux creep in type II superconductors. We demonstrate that a ≃10nm deep scratch on the sample surface at the position of the current path causes a change in its location. A further scratch was enough to irreversibly destroy the remanent state of the sample at room temperature. Our studies clarify some of the reasons for the difficulties of finding a trapped flux in remanent state at room temperature in graphite samples with SFs.

Background: Preterm birth is a major cause of morbidity and mortality in infants and children. Non-invasive methods for screening the neonatal immune status are lacking. Archaea, a prokaryotic life domain, comprise methanogenic species that are part of the neonatal human microbiota and contribute to early immune imprinting. However, they have not yet been characterized in preterm neonates. Objective: To characterize the gut immunological and methanogenic Archaeal (MA) signature in preterm neonates, using the presence or absence of atopic conditions at the age of 1 year as a clinical endpoint. Methods: Meconium and stool were collected from preterm neonates and used to develop a standardized stool preparation method for the assessment of mediators and cytokines and characterize the qPCR kinetics of gut MA. Analysis addressed the relationship between immunological biomarkers, Archaea abundance, and atopic disease at age 1. Results: Immunoglobulin E, tryptase, calprotectin, EDN, cytokines, and MA were detectable in the meconium and later samples. Atopic conditions at age 1 year were positively associated with neonatal EDN, IL-1β, IL-10, IL-6, and MA abundance. The latter was negatively associated with neonatal EDN, IL-1β and IL-6. Conclusion: We report a non-invasive method for establishing a gut immunological and Archaeal signature in preterm neonates, predictive of atopic diseases at the age of 1 year

DNA methylation is an epigenetic mechanism for gene expression modulation and can be used as a predictor of future disease risks. A prospective birth cohort study was performed to clarify the effects of neurotoxicants on child development, namely, the Tohoku Study of Child Development, in Japan. This study aimed to evaluate the association of prenatal exposure to five toxic metals—arsenic, cadmium, mercury, lead (Pb), antimony (Sb), and polychlorinated biphenyls (PCBs, N = 166)—with global DNA methylation in umbilical cord blood DNA. DNA methylation markers, 5-methyl-2’-deoxycytidine (mC) and 5-hydroxymethyl-2’-deoxycytidine (hmC), were determined using liquid chromatography-tandem mass spectrometry. The mC content in cord blood DNA was positively correlated with Pb and Sb levels (r = 0.442 and 0.288, respectively) but not with cord blood PCBs. We also observed significant positive correlations among Pb levels, maternal age, and hmC content (r = 0.159 and 0.243, respectively). The multiple regression analysis among the potential predictors demonstrated consistent positive associations between Pb and Sb levels and mC and hmC content. Our results suggest that global DNA methylation is a promising biomarker for prenatal exposure to Pb and Sb.

In Japan, the prevalence of low birth weight (LBW) has been estimated to be approximately 10%, which is the highest among developed countries. This high prevalence might affect the prevalence of LBW-associated diseases in the adult population of Japan. Recently, LBW has been recognized as a contributing factor to post-adaptive focal segmental glomerulosclerosis (FSGS) in adulthood; however, few reports to date have evaluated the clinical and pathological characteristics of post-adaptive FSGS. A 13-year-old girl was referred to our hospital owing to mild proteinuria, which was detected at a school urinary screening. She was born at a gestational age of 23 weeks, with a very LBW of 630 g. Dipstick urinalysis revealed grade (2+) proteinuria. Her serum creatinine level was 1.02 mg/dL, and she was diagnosed as having stage 2 chronic kidney disease (CKD). Her serum uric acid level was 7 mg/dL. Her mother and 16-years old brother had hyperuricemia, too. A percutaneous renal biopsy leads to a diagnosis of FSGS. After 3 years of treatment with an angiotensin receptor blocker, her proteinuria decreased. However, her serum creatinine level was 1.07 mg/dL, and she still had stage 2 CKD. We considered that in this patient, the first hit was her LBW, and the second hit was hyperuricemia. The second hit might be associated with the development of CKD. The birth history of patients is not usually confirmed by nephrologists. Our case demonstrates that obtaining information regarding the preterm birth and LBW of patients is important in the diagnosis of noncommunicable diseases, because school urinary screening is not routinely performed in countries other than Japan.

Background: The presence of a skilled health professional at delivery is critical to reduce infant and maternal mortality. Health development plans and strategies, especially in developing countries, consider equity in access to maternal health care services as a priority. This study aimed to measure and analyze the inequality in the use of skilled births attendance services in Mauritania. The study identifies the inequality determinants and to explore its changes over the period 2007–2015. Methods: The concentration curve, concentration index, decomposition of the concentration index and Oaxaca-type decomposition technique were performed to measure socio-economics related inequalities in skilled birth attendance services utilization and identify contribution of different determinants to such inequality as well as the changes in inequality overtime using data from Mauritania Multiple Indicator Cluster Surveys (MICS) 2007, 2011 and 2015. Results: The concentration index for skilled birth attendance services utilization dropped from 0.6324 [P < 0.001] in 2007 to 0.5852 [P < 0.001] in 2015. Prenatal care, household wealth Status and urban-rural location made the biggest contributions to socio-economic related inequalities. Decomposition of the concentration index and Oaxaca-type decomposition revealed changes prenatal care, rural-urban location made positive contributions to decline in inequality. However, alternation in household wealth score, woman’s age, her education level and the number of living children pushed the equality toward deterioration. Conclusion: Clearly, the pro-rich inequality in skilled birth attendance is high in Mauritania despite a slight decrease during the study period. Policy actions on eliminating urban-rural and wealth index disparity should target increase access to skilled birth attendance. Multisectoral Policy actions is needed to improve social determinants of health and to remove health system bottlenecks including socio-economic empowerment of women and girls, enhancing availability and affordability of Reproductive and Maternal Health commodities, improving availability of obstetrical providers in rural area, promoting a better distribution and quality of health infrastructure particularly health posts and health centers, and replacing user fees by an equitable, efficient and sustainable financing scheme under an universal health coverage vision.

miRNAs have recently attracted investigators' interest as regulators of valvular diseases pathogenesis, diagnostic biomarkers, and therapeutical targets. Evidence from in-vivo and in-vitro studies demonstrated stimulatory or inhibitory roles in mitral valve prolapse development, aortic leaflet fusion, and calcification pathways, specifically osteoblastic differentiation and transcription factors modulation. Tissue expression assessment and comparison between physiological and pathological phenotypes of different disease entities, including mitral valve prolapse and mitral chordae tendineae rupture, emerged as the best strategies to address miRNAs over or under-representation and thus, their impact on pathogeneses. In this review, we discuss the fundamental intra- and intercellular signals regulated by miRNAs leading to defects in mitral and aortic valves, congenital heart diseases, and the possible therapeutic strategies targeting them. These miRNAs inhibitors comprise of antisense oligonucleotides and sponge vectors. The miRNA mimics, miRNA expression vectors, and small molecules are instead possible practical strategies to increase specific miRNA activity. Advantages and technical limitations of these new drugs, including instability and complex pharmacokinetics, are also presented. Novel delivery strategies, such as nanoparticles and liposomes, are described to improve knowledge on future personalized treatment directions.

Defect detection and identification from fruits and vegetables are particularly challenging for Indian agriculture. Defect Detection is a process to identify the defects or damages in vegetables and fruits, based on the shapes, colors and textures. The local market finds it difficult to cope with the defects and other infections in fruits and vegetables as quality evaluations and classification of vegetables and fruits have become tedious process. Recently, several approaches based on Image processing, Machine Learning and Artificial Intelligence methods have been proposed for the purpose of defect detection. On the basis of classifying the types of defects, related pathogens, and physical and morphological characteristics descriptors, we review the different approaches based on a corpus of 57 articles between 2016 and 2021. In the process of describing the defect analysis, steps from the target articles, algorithms, and methods including qualitative and quantitative evaluation are mainly summarized. The aim of this current review work is to present-day novel images and collects recent defective area calculation methods to detect surface defects of fruits and vegetables using RGB images and to classify whether the fruit is defected or fresh. A rigorous evaluation of many new algorithms provided for quality assurance by researcher’s probes of vegetables and fruits have been conducted in this work. This review work conveys that using the recent identification features will help to decrease the disadvantages in fruit storeroom owing to storage of the affected vegetables and fruits, ie. Preventing the spread of defects and other infections from the infected fruits and vegetables to the fresh ones.

Maternal and child nutrition has been a critical component of health, sustainable development, and progress in low- and middle-income countries (LMIC). While a decrement in maternal mortality is an important indicator, simply surviving pregnancy and childbirth does not imply better maternal health. One of the fundamental obligations of nations under international human rights law is to enable mothers and teenage girls to endure pregnancy and delivery as an aspect of their enjoyment of reproductive and sexual health and rights and live a dignified life. The aim of this study was to discover the correlation between the Maternal Observation and Motivation (MOM) program and m-Health support for maternal and newborn health. A Comparative study was done among 109 pregnant mothers (study group-94; control group-102 mothers) with not less than 20 weeks of gestation. Maternal outcomes such as Hb, weight gain and newborn results like birth weight and crown- heel length was obtained on the baseline, 28 and 36 weeks of gestation. Other secondary data collected were abortion, stillbirth, low birth weight, major congenital malformations, twin or triplet pregnancies, physical activity and maternal wellbeing. The MOM intervention included initial face to face education, three in-person visits and eight virtual health coaching by WhatsApp. The baseline data on Hb of the mothers show that 31(32.98%) vs 27(28.72%) of the study and control group had anaemia, which improved to 27.66% and 14.98% among study group mothers at 28 and 36 weeks of gestation (p<0.001). The weight gain (p< 0.001), level of physical activity (p< 0.001), and maternal wellbeing (p< 0.01) also had significant differences after the Intervention. Even after controlling for potentially confounding variables, the maternal food practices regression model revealed that birth weight was directly correlated with consumption of milk (p 0.001), fruits (p 0.01), and green vegetables (p 0.05).As per the physical activity and maternal wellbeing regression model, the birth weight and crown heel length were strongly related with the physical activity and maternal wellbeing of mothers at 36 weeks of gestation (p <0.05). Combining the MOM intervention with standard antenatal care is a safe and effective way to improve maternal welfare while upholding pregnant mothers' human rights.

A widely accepted concept is that boys are more susceptible than girls to oxidative stress related complications of prematurity, including bronchopulmonary dysplasia (BPD), retinopathy of prematurity (ROP), necrotizing enterocolitis (NEC), intraventricular hemorrhage (IVH), and periventricular leukomalacia (PVL). We aimed to quantify the effect size of this male disadvantage by performing a systematic review and meta-analysis of cohort studies exploring the association between sex and complications of prematurity. Risk ratios (RRs) and 95% CIs were calculated by a random-effects model. Of 1365 potentially relevant studies, 41 met the inclusion criteria (625680 infants). Male sex was associated with decreased risk of hypertensive disorders of pregnancy, fetal distress, and C-section, but increased risk of low Apgar score, intubation at birth, respiratory distress, surfactant use, pneumothorax, postnatal steroids, late onset sepsis, any NEC, NEC&gt;stage 1 (RR 1.12, CI 1.06-1.18), any IVH, severe IVH (RR 1.28, CI 1.22-1.34), severe IVH or PVL, any BPD, moderate/severe BPD (RR 1.23, CI 1.18-1.27), severe ROP (RR 1.14, CI 1.07-1.22), and mortality (RR 1.23, CI 1.16-1.30). In conclusion, preterm boys have higher clinical instability and greater need for invasive interventions than preterm girls. This leads to a male disadvantage in mortality and short-term complications of prematurity.

Overt hyperthyroidism during pregnancy is associated with risk of maternal-fetal complications. The antithyroid drugs (ATD) have a potential risk for teratogenic effects and fetal–neonatal hy-pothyroidism. This study evaluated ATD treatment and thyroid function control during preg-nancy, and pregnancy outcome in women with hyperthyroidism. Patients and methods: retro-spective analysis of 36 single fetus pregnancies in 29 consecutive women (median age 30.3 ± 4.7 years) with hyperthyroidism diagnosed before or during pregnancy; a control group of 39 healthy euthyroid pregnant women was used. Results: 26 women had Graves’ disease (GD, 33 pregnan-cies), 1 had a hyperfunctioning autonomous nodule, 2 had gestational transient thyrotoxicosis (GTT). Methimazole (MMI) was administered in 22 pregnancies (78.5%), Propylthiouracil (PTU) in 2 (7.1%), switch from MMI to PTU in 4 (14.2%), no treatment in 8 pregnancies (3 with subclinical hyperthyroidism, 5 euthyroid with previous GD remission before conception). One spontaneous abortion at 5 weeks (3.4% of pregnancies) and 1 premature delivery at 32 weeks with perinatal death in 24h (3.4%) were recorded in 2 of the 8 pregnancies of GD patients diagnosed shortly before (< 6 weeks) or during gestation. In women treated more than 6 months until conception (20 pregnancies): a) median ATD doses were lower than those in women diagnosed shortly before or during pregnancy; b) ATD was withdrawn in 40% of pregnancies in trimester (T) I, all on MMI < 10 mg/day (relapse in 14.2%), and in up to 55% in TIII; c) TSH level was below normal in 37%, 35% and 22% of pregnancies in T I, II and III respectively; FT4 was increased in 5.8% (T I) and sub-normal in 11.75% in TII and III; d) one fetal death due to a true umbilical cord knot was recorded. Hyperthyroidism relapsed postpartum in 83% of GD patients (at median 3 ± 2.6 months). One child had neonatal hyperthyroidism (3.3% of live children in GD women) and a small atrial sept defect (4% of live children in ATD treated women). Mean birth weight did not differ from that of the control group. Conclusion. In hyperthyroid women with long-term ATD control before con-ception, drugs could be withdrawn in TI in a third of them, and fetal complications were rare. Frequent serum TSH and FT4 monitoring is needed in order to maintain optimal thyroid function during pregnancy.

The effect of thermal radiation on the two – dimensional, steady-state, conjugate heat transfer from a circular cylinder with an internal heat source in steady laminar crossflow is investigated in this work. P₀ (Rosseland) and P₁ approximations were used to model the radiative transfer. The mathematical model equations were solved numerically. Qualitatively, P₀ and P₁ approximations show the same effect of thermal radiation on conjugate heat transfer; the increase in the radiation – conduction parameter decreases the cylinder surface temperature and increases the heat transfer rate. Quantitatively, there are significant differences between the results provided by the two approximations.

Tissue engineering and regenerative medicine has gradually evolved as a promising therapeutic strategy to the modern healthcare of the aging and diseased population. In this study, we developed a novel nano-fibrous scaffold and verified its application in the critical bone defect regeneration. The metformin-incorporated nano-gelatin/hydroxyapatite fibers (NGF) was produced by electrospinning, cross-linked, and then characterized by XRD and FTIR. Cytotoxicity, cells adhesion, cell differentiation, and quantitative osteogenic gene and protein expression were analyzed by bone marrow stem cells from rat. Rat forearm critical bone defect model was performed for the in vivo study. The nano-gelatin/hydroxyapatite fibers (NGF) were characterized by their porous structures with proper interconnectivity without significant cytotoxic effects; the adhesion of bone marrow stem cells on the nano-gelatin/hydroxyapatite fibers (NGF) could be enhanced. The osteogenic gene and protein expression were upregulated. Post implantation, the new regenerated bone in bone defect was well demonstrated in the NGF samples. We demonstrated that the metformin-incorporated nano-gelatin-hydroxyapatite fibers greatly improved healing potential on the critical sized bone defect. Although metformin-incorporated nano-gelatin/hydroxyapatite fibers had advantageous effectiveness during bone regeneration, further validation is required before it can be applied to clinical applications.

Long-chain omega-3 fatty acid status during pregnancy may influence newborn anthropometry and duration of gestation. Evidence from high-quality trials from LMICs is limited. We conducted a double-blind, randomized, placebo-controlled trial among 957 pregnant women (singleton gestation, 14-20 weeks’ gestation at enrollment) in India to test the effectiveness of 400 mg/d algal docosahexaenoic acid (DHA) compared to placebo provided from enrollment through delivery. Among 3379 women who were screened, 1171 were found eligible; 957 enrolled and were randomized. The intervention was two microencapsulated algal DHA (200 X 2= 400 mg/d) or two microencapsulated soy and corn oil placebo tablets to be consumed daily from enrollment (20 weeks) through delivery. The primary outcome was newborn anthropometry (birth weight, length, head circumference). Secondary outcomes were gestational age and 1 and 5 min Appearance, Pulse, Grimace, Activity, and Respiration (APGAR) score. The groups (DHA; n=478 and placebo; n=479) were well balanced at baseline. There were 902 live births. Compliance with the intervention was similar across groups (DHA: 88.5%; placebo: 87.1%). There were no significant differences between DHA and placebo group for birth weight (2750.6 ± 421.5 vs. 2768.2 ± 436.6 g, p=0.54), length (47.3 ± 2.0 vs. 47.5 ±2.0 cm, p=0.13) or head circumference (33.7 ± 1.4 vs 33.8 ± 1.4 cm, p=0.15). The mean gestational age at delivery was similar between groups (DHA: 38.8 ± 1.7 placebo: 38.8 ± 1.7 wk, p= 0.54) as were APGAR scores at 1 and 5 min. Supplementing mothers through pregnancy with 400mg/d DHA did not impact the offspring birthweight, length or head circumference.

Software is playing the most important role in recent vehicle innovation, and consequently the amount of software has been rapidly growing last decades. Safety-critical nature of ships, one sort of vehicles, makes Software Quality Assurance (SQA) has gotten to be a fundamental prerequisite. Just-In-Time Software Defect Prediction (JIT-SDP) aims to conduct software defect prediction (SDP) on commit-level code changes to achieve effective SQA resource allocation. The first case study of SDP in maritime domain reported feasible prediction performance. However, we still consider that the prediction model has still rooms for improvement since the parameters of the model are not optimized yet. Harmony Search (HS) is a widely used music-inspired meta-heuristic optimization algorithm. In this article, we demonstrated that JIT-SDP can produce the better performance of prediction by applying HS-based parameter optimization with balanced fitness value. Using two real-world datasets from the maritime software project, we obtained an optimized model that meets the performance criterion beyond baseline of previous case study throughout various defect to non-defect class imbalance ratio of datasets. Experiments with open source software also showed better recall for all datasets despite we considered balance as performance index. HS-based parameter optimized JIT-SDP can be applied to the maritime domain software with high class imbalance ratio. Finally, we expect that our research can be extended to improve performance of JIT-SDP not only in maritime domain software but also in open source software.

New experimental and clinical findings question the historic view of hydrocephalus and its 100-year-old classification. In particular, real-time MRI evaluation of CSF flow and detailed insights into brain water regulation on the molecular scale indicate the existence of at least three main mechanisms that determine the dynamics of neurofluids. (i) Inspiration is a major driving force (ii) Adequate filling of brain ventricles by balanced cerebrospinal fluid upsurge is sensed by cilia (iii) The perivascular glial network connects the ependymal surface to the pericapillary Virchow-Robin spaces. Hitherto, these aspects have not been considered a common physiologic framework improving knowledge and therapy for severe disorders of normal-pressure and post-haemorrhagic hydrocephalus, spontaneous intracranial hypotension and spaceflight disease.

Electromagnetic sensors have been used for inspecting small surface defects of metals. Based on the eddy-current thin-skin regime, a revised algorithm is proposed for a triple-coil drive-pickup eddy-current sensor scanning over long surface crack slots (10 mm) with different rotary angles. The method is validated by the voltage measurement of the designed EC sensor scanning over a benchmark (ferromagnetic) steel with surface defects of different depths and rotary angles. With an additional sensing coil for the designed EC sensor, the defect angle (or orientation) can be measured without spatially and coaxially rotating the excitation coil. By referring to the voltage change (due to the defect) diagram (voltage sum versus voltage different) of two sensing pairs, the rotary angle of the surface crack is retrieved with a maximum residual deviation of 3.5 %.

Introduction: Leptin is a polypeptide hormone and in pregnancy it is secreted by the placenta and maternal and fetal adipose tissues. The expression of leptin and its specific receptors is observed in the uterine endometrium which indicates leptin involvement in the implantation process and embryonic/fetal development. Normal leptin production is a factor responsible for uncomplicated gestation, embryo development and fetal growth. Objective: To compare at delivery maternal serum and cord blood leptin concentrations in normal pregnancies and in pregnancies complicated by intrauterine growth restriction (IUGR). Material and methods: The study was performed in 25 pregnant women with isolated IUGR diagnosed by ultrasonography (study subjects) and in 194 pregnant women without any comorbid health conditions (controls). Leptin concentrations in maternal serum and in cord blood samples collected at delivery were measured by ELISA and subsequently analyzed by maternal Body Mass Index (BMI), mode of delivery, and infant gender and birth weight. For comparative analyses of normally distributed variables, parametric tests were used, i.e. the Student-t to test the assumption of homogeneity or non-homogeneity of variance and a One-Way ANOVA when more than two groups were compared. The non-parametric Mann-Whitney test was used when the distribution was not normal. The Pearson correlation coefficient was calculated to assess the correlation between normally distributed variables (p<0.05). Results: In pregnancies complicated by IUGR, the mean maternal serum leptin concentration at delivery was significantly higher (52.73 ± 30.49 ng/mL) than in normal pregnancies (37.17 ± 28.07 ng/mL) (p=0.01). The mean cord blood leptin concentration in pregnancies complicated by IUGR was 7.97 ± 4.46 ng/mL and significantly lower than in normal pregnancies (14.78 ± 15.97 ng/mL) (p=0.04). In normal pregnancies, but not in pregnancies complicated by IUGR, a statistically significant correlation was established between maternal serum leptin concentrations and maternal BMI at delivery (r=0,22; p=0.00). No statistically significant correlation was found between cord blood leptin concentrations and maternal BMI in either study subjects or controls. In normal pregnancies, but not in pregnancies complicated by IUGR, a strong correlation was observed between cord blood leptin concentrations and birth weight (r=0,23; p=0.00). In both study subjects and controls, there were no correlations between leptin concentrations in maternal serum and cord blood and infant gender and mode of delivery. Conclusions: Elevated maternal blood leptin concentrations in pregnancies complicated by IUGR may indicate a significant adverse effect of elevated leptin on fetal growth. Enhanced leptin production by the placenta suggests leptin as a candidate marker of placental insufficiency. The differences in leptin concentrations, measured in maternal serum and in cord blood, between the study subjects and controls suggest that deregulated leptin levels may increase the risk of obstetric complications associated with placental insufficiency.

Convolutional Neural Networks combined with autonomous drones are increasingly seen as enablers of partially automating the aircraft maintenance visual inspection process. Such an innovative concept can have a significant impact on aircraft operations. Through supporting aircraft maintenance engineers detect and classify a wide range of defects, the time spent on inspection can significantly be reduced. Examples of defects that can be automatically detected include aircraft dents, paint defects, cracks and holes, and lightning strike damage. Additionally, this concept could also increase the accuracy of damage detection and reduce the number of aircraft inspection incidents related to human factors like fatigue and time pressure. In our previous work, we have applied a recent Convolutional Neural Network architecture known by MASK R-CNN to detect aircraft dents. MASK-RCNN was chosen because it enables the detection of multiple objects in an image while simultaneously generating a segmentation mask for each instance. The previously obtained F1 and F2 scores were 62.67% and 59.35% respectively. This paper extends the previous work by applying different techniques to improve and evaluate prediction performance experimentally. The approaches uses include (1) Balancing the original dataset by adding images without dents; (2) Increasing data homogeneity by focusing on wing images only; (3) Exploring the potential of three augmentation techniques in improving model performance namely flipping, rotating, and blurring; and (4) using a pre-classifier in combination with MASK R-CNN. The results show that a hybrid approache combining MASK R-CNN and augmentation techniques leads to an improved performance with an F1 score of (67.50%) and F2 score of (66.37%)

In roll-to-roll (R2R) processing, uniformity of the web is a crucial factor that can guarantee high coating quality. To understand web defects due to thermal deformation, we analyzed the effects of web unevenness on the coating quality of an yttria-stabilized zirconia (YSZ) layer, a brittle electrolyte of solid oxide fuel cells (SOFCs). We used finite element analysis to analyze the thermal and mechanical deformations at different drying temperatures. A YSZ layer was also coated using R2R slot-die coating to observe effects of web unevenness on the coating quality. It was seen that web unevenness was generated by thermal deformation due the conduction and convection heat from the dryer. Owing to varying web unevenness with time, the YSZ layer developed cracks. At higher drying temperatures, more coating defects having larger widths were generated. Results indicated that web unevenness at the coating section led to coating defects, which could damage the SOFC and decrease its yield in the R2R process. From this study, we suggest that coating defects, generated by the web unevenness owing to the convection and conduction heat, should be considered for the high-volume production of brittle electrolytes using the R2R process.

.With the increasing use of carbon fiber reinforced plastics in various area, carbon fiber composites based on prepregs have attracted attention in industries and academia research. However, prepreg manufacturing processes are costly, and the strength of structures varies depending on the orientation and defects (pores and delamination). For non-contact evaluation of internal defects, we proposed lock-in infrared thermography to investigate orientation angles after a compression test. We also conducted a drop-weight impact test to study the behaviour of the composites after impact according the fibers orientation for composite fabricated using unidirectional carbon fiber prepregs. Using CAI tests, we determined the residual compressive strength and confirmed the damage modes using a thermal camera. The results of the drop weight impact tests show that the specimen laminated at 0° suffered the largest damage because of susceptibility of the resin to impact. In contrast, the specimens oriented in of 0°/90° and +45°/–45° directions transferred more than 90% of the impact energy back to the impactor because of the lamination of fibers in the orthogonal directions. Furthermore, the specimens that underwent complete damage in the impact tests were subjected to the lock-in method and showed internal delamination and cut fibers. With the finite elements analysis, the damage of each ply could be observed. Moreover, the temperature differences in the residual compression tests were not significant.

Defectively manufactured and deliberately damaged composite laminates fabricated with different continuous reinforcing fibres (respectively, carbon and glass) and polymer matrices (respectively, thermoset and thermoplastic) were inspected in magnetic resonance imaging equipment. Two pulse sequences were evaluated during non-destructive examination conducted in saline solution-immersed samples to simulate load-bearing orthopaedic implants permanently in contact with biofluids. The orientation, positioning, shape, and especially the size of translaminar and delamination fractures were determined according to stringent structural assessment criteria. The spatial distribution, shape, and contours of water-filled voids were sufficiently delineated to infer the amount of absorbed water if thinner image slices than this study were used. The surface texture of composite specimens featuring roughness, waviness, indentation, crushing, and scratches was outlined, with fortuitous artefacts not impairing the image quality and interpretation. Low electromagnetic shielding glass fibres delivered the highest, while electrically conductive carbon fibres produced the poorest quality images, particularly when blended with thermoplastic polymer, though reliable image interpretation was still attainable.

Plant-parasitic nematodes cause expressive annual yield losses to worldwide agricultural production. Most cultivated plants have no known resistance against nematodes and the few bearing a resistance gene can be overcome by certain species. The chemical methods that have been deployed to control nematodes were largely banned from use due to their poor specificity and high toxicity. Hence, there is an urgent need for the development of cleaner and more specific control methods. Recent advances in nematode genomics, including in phytoparasitic species, provide an unprecedented opportunity to identify genes and functions specific to these pests. Using phylogenomics, we compared 61 nematode genomes, including 16 for plant-parasitic species and identified more than 24,000 protein families specific to these parasites. In the genome of Meloidogyne incognita, one of the most devastating plant parasites, we found ca. 10,000 proteins with orthologs restricted only to phytoparasitic species and no further homology in protein databases. Among these phytoparasites-specific proteins, ca. 1,000 shared the same properties as known secreted effectors involved in essential parasitic functions. Of those, 68 were novel and showed strong expression during the endophytic phase of the nematode life cycle, based on both RNA-seq and RT-qPCR analyses. Besides effector candidates, transcription-related and neuro-perception functions were enriched in phytoparasites-specific proteins, revealing interesting targets for nematode control methods. This phylogenomics analysis, constitutes an unprecedented resource for the further understanding of the genetic basis of nematode adaptation to phytoparasitism and for the development of more efficient control methods.

Background The link between age at marriage and first birth in explaining completed family size is not always direct, due to heterogeneity in circumstances, that compel individual women to marry or initiate childbearing at a particular age. We analyzed data for 1020 women aged 45-49 in 2014 of the 1965-1969 birth cohort from the 2013-14 Zambia Demographic and Health Survey (ZDHS). Methods We fitted a bivariate and multivariate multinomial logistic regression to establish the relationship between a mother’s age at first marriage and at first birth on completed family size (CFS). Chi-square test of proportions measuring differences in proportions and relative risk ratios (RRR) with confidence intervals at 95% are reported. Results Our results show that the average CFS was 6.7 (95% CI: 6.5 – 6.9) among women completing their reproductive span in 2014 with mean age at first marriage and birth being 18.3 years (95% CI: 18.0 – 18.5) and 18.9 years (95% CI: 18.7 – 19.1) respectively. Women marrying at younger ages and having their first birth at younger ages were more likely (RRR: 1.187; 95% CI: 1.138-1.239 and RRR: 0.195; 95% CI: 0.074-0.511 respectively) to have higher CFS than their compatriots that initiated both marriage and childbearing at or after age 22 controlling for covariates as presented in the controlled model. The independent effects model shows that the risk of having 1-3 children compared to 6 or more children was lower (RRR: 0.073; 95% CI: 0.009-0.611; RRR: 0.136; 95% CI: 0,046-0.402 and RRR: 0.421; 05% CI: 0.135-1.312) for women whose ages at first marriage were <15, 15-18 and 19-21 respectively relative to 22+. Women with 1-3 children were 2.5 times more likely to use contraception than women with 6 or more children. Conclusion Having no education, being a rural resident and having a medium household wealth all increase the risk of having higher CFS. Women that marry before age 19 have a higher likelihood of having 6 or more children by the end of their reproductive period. The study concludes that apart from a woman’s age at first marriage and first birth, a complex network of factors interact to determined CFS.

The epidemic transmission of Zika virus (ZIKV) in Brazil has been identified as a cause of microcephaly and other neurological malformations in babies of ZIKV-infected women. This study provides a descriptive analysis, since the onset of symptoms to the delivery, of a cohort who were registered as having ZIKV infection in pregnancy, from November 2015 to December 2016. Suspected cases were registered at a referral center for infectious and tropical diseases in Manaus, in the Brazilian Amazonian region. A total of 834 women with suspected ZIKV in pregnancy were included, of whom 91.4% had confirmed pregnancy. Reverse-transcriptase polymerase chain reaction (RT-PCR) confirmed ZIKV infection in 42.2% of the cohort. In 35.2% of the cohort, ZIKV was the sole infection identified. Severe adverse pregnancy outcomes (abortion, stillbirth, or microcephaly) were observed in both RT-PCR ZIKV-positive (4.96%) and ZIKV-negative (2.15%) cases. Women with suspected ZIKV infection were much more likely to have adverse pregnancy outcomes if they were symptomatic during the first trimester of pregnancy (odds ratio 10.5; 95% confidence interval 4.0–27.0; p<0.001). Among pregnant women with suspected ZIKV infection, the occurrence of symptoms in the first trimester is associated with an especially high risk of severe adverse pregnancy outcomes.

(1) Background: The aim of this work was to systematically review existing studies on whether hysteroscopy improves the reproductive outcomes of women with infertility even in the absence of intrauterine pathologies when compared to women who did not receive a hysteroscopy. (2) Methods: We established the Participant-Intervention-Comparison-Outcome strategy and used the Preferred Reporting Items for Systematic Reviews and Meta-Analyses statement to conduct a systematic review of 11 studies which were retrieved from 3 electronic databases: Ovid-Medline, Ovid-Embase, and the Cochrane Library. Two independent investigators extracted the data from the included studies and used the Cochrane risk-of-bias tool to assess their quality. (3) Results: The primary outcome measures were the clinical pregnancy rates (CPRs) and live birth rates (LBRs) in the in vitro fertilization (IVF)/intracytoplasmic sperm injection (ICSI) cycles. Hysteroscopy in infertile women without intrauterine pathologies showed higher CPRs and LBRs than those in the same population who did not receive hysteroscopy in cases of recurrent implantation failure and IVF (odds ratio: 1.79 and 1.46, 95% confidence interval: 1.46-2.30 and 1.08-1.97 for CPR and LBR, respectively); however, the degree of significance was not as high for LBR. (4) Conclusions: Hysteroscopy before IVF/ICSI in infertile women without intrauterine pathologies may potentially be effective in improving the CPRs and LBRs in patients with RIF. Robust and high-quality randomized trials are warranted to confirm this finding.

There is accumulating evidence that prenatal exposure to air pollution disturbs fetal growth and development, but little is known about these effects in cold climates or their season-specific or joint effects. Our objective was to assess independent and joint effects of prenatal exposure to specific air pollutants on the risk of low birth weight (LBW). We utilized the 2568 children of the Espoo Cohort Study, born between 1984 and 1990, and living in the City of Espoo. We conducted stratified analyses for births during warm and cold seasons separately. We analyzed the effect estimates using multi-pollutant Poisson regression models with risk ratio (RR) as the measure of effect. The risk of LBW was related to exposure to CO and (adjusted RR 1.44, 95% CI: 1.04-2.00) and exposure to O3 in the spring-summer season (1.82, 1.11-2.96). There was also evidence of synergistic effects between CO and O3 (relative risk due to interaction, RERI, all year 1.08, 95% CI: 0.27-4.94, spring-summer 3.97, 2.17-25.85) and PM2.5 and O3 (all year 0.72, -0.07-3.60, spring-summer 2.80, 1.36-19.88). We present new evidence of both independent and joint effects of prenatal exposure in a cold climate on the risk of LBW at low levels of air pollution.

Different cohort studies documented a lower glomerular filtration rate (GFR) in former extremely low birth weight (ELBW, <1000 g) neonates throughout childhood when compared to term controls. The current aim is to pool these studies to describe the GFR pattern over the pediatric age range. To do so, we conducted a systematic review on studies reporting on GFR measurements in former ELBW cases while GFR data of healthy age-matched controls included in these studies were co-collected. Based on 248 hits, 6 case-control and 3 cohort studies were identified, with 444 GFR measurements in 380 former ELBW cases (median age 5.3-20.7 years). The majority were small (17-78 cases) single center studies, with heterogeneity in GFR measurement (inulin, Cystatin C or creatinine estimated GFR formulae) tools. Despite this, the median GFR (ml/kg/1.73m²) within case-control studies was consistently lower (-13, range -8 to -25%) in cases, so that a relevant minority (15-30%) has a eGFR<90 mgl/kg/1.73m²). Consequently, this pooled analysis describes a consistent pattern of reduced eGFR in former ELBW cases throughout childhood. Research should focus on perinatal risk factors for impaired GFR and long-term outcome, but is hampered by single center cohorts, study size, and heterogeneity of GFR assessment tools.

The success of a software system is highly dependent upon its quality which is a very critical aspect and is the ultimate goal to be achieved. Defect Management is the most important process in ensuring software quality, it involves defect detection, defect categorization, defect prioritization, defect removal and defect verification. The main purpose of this process is to develop and produce defect free or least defected software systems of high quality. It plays a vital role in gaining customer confidence and satisfaction which is essential for the reputation of the organization developing the system. The central objective of this study is to explain the importance of defect management and its impact on the quality of the software along with various defect management techniques to support the objective.

Accurate prediction of defects in software components plays a vital role in administrating the quality of the quality and efficiency of the system to be developed. So we have written a systematic literature review in order to evaluate the four main defect prediction techniques. Defect prediction paves way for the testers to find bugs and modify them in order to achieve input to output conformance. In this paper we have discussed the open issues in predicting software defects and have provided with a detailed analyzation of different methods including Machine Learning, Integrated Approach, Cross-Project and Deep Forest algorithm in order to prevent these flaws. However, it is almost impossible to rule which method is better than the other so every technique can be analyzed separately and the best technique according to the problem at hand can be used or can be altered to create hybrid technique suitable for the cause.

The main purpose of this research is to use “DMAIC” and “DMADV” framework of six sigma to reduce cost of projects, increase yields, improve performance and reduce defects. This study conclude that the sigma level of cement bag production in four production lines is “4.7 DPMO” values of 710 and the possibility of defects per unit of 11 possibilities this situation was handled by using six sigma. Any business or industry run only to satisfy customer and increase their profits, this can be attained as development of quality product..For the ranking of newly established universities the certification of those institutes is very important and also a critical process. For this process we used Lean six sigma approach that can identify the wastes that affect this process.Six sigma can be applied to any work field such as education, power optimization and other types of industries Six sigma “DMAIC” approach is also used for the testing of EDA tools that occurs due to the complex coding or configurations, flows and platforms they support. To improve the process quality of SDLC it’s necessary to remove the defects of system in advance along with thorough valuation of size and it also makes project accordant with real time environment

This study investigated the trends of registered Death and Birth in Nigeria using Generalized Linear Models. Annual data on Death and Birth was collected from National Population Commission for the period of 2004 to 2017. The Natural increase calculated revealed a positive trend in the natural increase in Nigeria from 2004 to 2017. Evidence from summary statistics revealed some level of over dispersion (variance > mean). This study explored Poisson Regression Models and Negative Binomial Regression Models using two links (identity and log). The results revealed a positive increase in registration of birth and death rates in Nigeria and among the competing the models, Negative Binomial regression model with identity link emerged as the best model for modeling birth and death rates registration in Nigeria. Data on numbers of deaths and causes of death are essential if countries are to determine priorities, formulate and monitor policies for public health care as well as other government policies that may be based on such data

A multiscale modelling approach was developed in order to estimate the effect of defects on the strength of unidirectional carbon fiber composites. The work encompasses a micromechanics approach, where the known reinforcement and matrix properties are experimentally verified and a 3D finite element model is meshed directly from micrographs. Boundary conditions for loading the micromechanical model are derived from macroscale finite element simulations of the component in question. Using a microscale model based on the actual microstructure, material parameters and load case allows realistic estimation of the effect of a defect. The modelling approach was tested with a unidirectional carbon fiber composite beam, from which the micromechanical model was created and experimentally validated. The effect of porosity was simulated using a resin-rich area in the microstructure and the results were compared to experimental work on samples containing pores.

Aluminum profile surface defects can greatly affect the performance, safety and reliability of products. Traditional human-based visual inspection is low accuracy and time consuming, and machine vision-based methods depend on hand-crafted features which need to be carefully designed and lack robustness. To recognize the multiple types of defects with various size on aluminum profiles, a multiscale defect detection network based on deep learning is proposed. Then, the network is trained and evaluated using aluminum profile surface defects images. Results show 84.6%, 48.5%, 96.9%, 97.9%, 96.9%, 42.5%, 47.2%, 100%, 100%, 43.3% average precision(AP) for the ten defect categories, respectively, with a mean AP of 75.8%, which illustrate the effectiveness of the network in aluminum profile surface defects detection. In addition, saliency maps also show the feasibility of the proposed network.

This paper describes a multi-channel in-situ monitoring system developed to better understand defect formation signatures in metal additive manufacturing. Three high-speed imaging modes coupled with an image computer capable of processing and storing these data streams allowed an examination of defect formations signatures and mechanisms. It was found that defects later detected in X-ray computed tomography (CT) scans were related to regions with anomalous heat signatures and powder bed morphology. Automated defect detection algorithms based on these defect signatures captured 80% of defects greater than 300 µm.

Software defect prediction is an important means to guarantee software quality. Because there are no sufficient historical data within a project to train the classifier, cross-project defect prediction (CPDP) has been recognized as a fundamental approach. However, traditional defect prediction methods using feature attributes to represent samples, which can not avoid negative transferring, may result in poor performance model in CPDP. This paper proposes a multi-source cross-project defect prediction method based on dissimilarity space ( DM-CPDP). This method first uses the density-based clustering method to construct the prototype set with the cluster center of samples in the target set. Then, the arc-cosine kernel is used to form the dissimilarity space, and in this space the training set is obtained with the earth mover’s distance (EMD) method. For the unlabeled samples converted from the target set, the KNN algorithm is used to label those samples. Finally, we use TrAdaBoost method to establish the prediction model. The experimental results show that our approach has better performance than other traditional CPDP methods.

Cost-effective and functionalized scaffolds are in high demand for stem-cell-based regenerative medicine to treat refractory bone defects in craniofacial abnormalities and injuries. One potential strategy is to utilize pharmacological and cost-effective plant polyphenols and biocompatible proteins, such as gelatin. Nevertheless, the use of chemically modified proteins with plant polyphenols in this strategy has not been standardized. Here, we demonstrated that gelatin chemically modified with epigallocatechin gallate (EGCG), the major catechin isolated from green tea, can be a useful material for dedifferentiated fat cells and adipose-derived stem cells and can induce bone regeneration in a rat congenial cleft-jaw model in vivo. Vacuum-heated gelatin sponge modified with EGCG (vhEGCG-GS) induced superior osteogenesis from these two cell types compared with vacuum-heated gelatin sponge (vhGS). The EGCG-modification converted the water wettability of vhGS to a hydrophilic property (contact angle: 110° to 3.8°) and the zeta potential to a negative surface charge; the modification enhanced the cell adhesion property and promoted calcium phosphate precipitation. These results suggest that the EGCG-modification with chemical synthesis can be a useful platform to modify the physicochemical property of gelatin. This alteration is likely to provide a preferable microenvironment for multipotent progenitor cells, inducing superior bone formation in vivo.

Abstract: The purpose of this study was to understand the role of infection in the origin of chromosomal anomalies linked to neurodevelopmental disorders. In patients with neurodevelopmental disorders, DNA’s from viruses and bacteria including known teratogens were tested against chromosome anomalies known to cause the disorders. Results support a theory that parental infections disrupt elaborate multi-system gene coordination needed for neurodevelopment. Genes essential for neurons, lymphatic drainage, immunity, circulation, angiogenesis, barriers, structure, and chromatin activity were all found close together in polyfunctional clusters that were deleted in neurodevelopmental disorders. These deletions account for immune, circulatory, and structural deficits that accompany neurologic deficits. In deleted clusters, specific and repetitive human DNA matched infections and passed rigorous artifact tests. In some patients, epigenetic driver mutations were found and may be functionally equivalent to deleting a cluster or changing topologic chromatin interactions because they change access to large chromosome segments. In three families, deleted DNA sequences were associated with intellectual deficits and were not included in any database of genomic variants. These sequences were thousands of bp and unequivocally matched foreign DNAs. Analogous homologies were also found in chromosome anomalies of a recurrent neurodevelopmental disorder. Viral and bacterial DNAs that match repetitive or specific human DNA segments are thus proposed to interfere with highly active break repair during meiosis, and sometimes delete polyfunctional clusters, and disable epigenetic drivers. Mis-repaired gametes produce zygotes containing rare chromosome anomalies which cause neurologic disorders and accompanying non-neurologic signs. Neurodevelopmental disorders may be examples of assault on the human genome by foreign DNA with some infections more likely tolerated because they resemble human DNA segments. Further tests of this model await new technology.

In addition to image filtering in the spatial and frequency domains, fractal characteristics induced algorithms offers considerable flexibility in the design and implementations of image processing solutions in areas such as image enhancement, image restoration, image data compression and spectrum of applications of practical interests. Facing up to a real-world problem of identifying workpiece surface defects, a generic adaptive fractal filtering algorithm is proposed, which shows advantages on the problems of target recognition, feature extraction and image denoising at multiple scales. First, we reveal the physical principles underlying between signal SNR and its representative fractal dimension indicative parameters, validating that the fractal dimension can be used to adaptively obtain the image features. Second, an adaptive fractal filtering algorithm (Abbreviated as AFFA) is proposed according to the identified correlation between the image fractal dimensions and the scales of objects, and it is verified by a benchmarking image processing case study. Third, by using the proposed fractal filtering algorithm, surface defects on a flange workpiece are identified. Compared to conventional image processing algorithms, the proposed algorithm shows superior computing simplicity and better performance Numerical analysis and engineering case studies show that the fractal dimension is eligible for deriving an adaptive filtering algorithm for diverse-scale object identification, and the proposed AFFA is feasible for general application in workpiece surface defect detection.

Polymer-derived SiC-polycrystalline fiber (Tyranno SA) shows excellent heat-resistance up to 2000^oC, and relatively high strength. Up to now, through our research, the relationship between the strength and residual defects of the fiber, which were formed during the production processes (degradation and sintering), has been clarified. In this paper, we addressed the relationship between the production condition and the surface roughness of the obtained SiC-polycrystalline fiber, using three different raw fibers (Elementary ratio: Si₁Al_0.01C_1.5O_0.4~0.5) and three different types of reactor (Open system, Partially-open system, and Closed system). With increase in the oxygen content in the raw fiber, the degradation during the production process easily proceeded. In this case, the degradation reactions (SiO+2C=SiC+CO and SiO₂+3C=SiC+2CO) in the inside of each filament become faster, and then the CO partial pressure on the surface of each filament is considered to be increased. In consequence, according to Le Chatelier’s principle, the surface degradation reaction and grain growth of formed SiC crystals would be considered to become slower. That is to say, using the raw fiber with higher oxygen content and closed system (highest CO content in the reactor), much smoother surface of the SiC-polycrystalline fiber could be achieved.

Findings from studies of prenatal exposure to pesticides and adverse birth outcomes have been equivocal so far. We examined prenatal exposure to agricultural pesticides in relation to preterm birth and term low birthweight, respectively, in children born between 1998 and 2010 randomly selected from California birth records. We estimated residential exposures to agriculturally applied pesticides within 2 km of residential addresses at birth by pregnancy trimester for 17 individual pesticides and 3 chemical classes (organophosphates, pyrethroids, and carbamates). Among maternal addresses located within 2 km of any agricultural pesticide application, we identified 24,693 preterm and 220,297 term births, and 4,412 term low birthweight and 194,732 term normal birthweight infants. First or second trimester exposures to individual pesticides (e.g., glyphosates, paraquat, imidacloprid) or exposures to 2+ pesticides in the three chemical classes were associated with small increases (3-7%) in risk for preterm birth; associations were stronger for female offspring. We did not find associations between term low birthweight and exposures to pesticides other than for myclobutanil (OR: 1.11; 95% CI: 1.04-1.20) and possibly pyrethroids as a class. Our improved exposure assessment revealed that first and second trimester exposures to pesticides were associated with preterm delivery but few affected term low birthweight.

Studies reported adverse behavioral development including internalizing and externalizing problems in association with prenatal exposure to bisphenol A (BPA) and phthalates, however, findings were not sufficient due to using different assessment tools and child ages among studies. This study aimed to examine associations between maternal serum levels of BPA and phthalate metabolites and behavioral problems at preschool age. The Strengths and Difficulties Questionnaire (SDQ) was used to assess behavioral problems at 5 years of age. BPA and phthalate metabolite levels in the 1^st trimester maternal serum was determined by LC-MS/MS for 458 children. Variables used for adjustment were parental ages, maternal cotinine levels, family income during pregnancy, child sex, birth order and age at SDQ completed. The median concentrations of BPA, MnBP, MiBP, MEHP and MECPP were 0.062, 26.0, 7.0, 1.40, and 0.20 ng/ml, respectively. BPA level was associated with increased hyperactivity/inattention risk among girls (OR=1.66, 95% CI: 0.95-2.90) and∑DBP_m (MnBP + MiBP) level was associated with decreased total difficulties risk overall and among girls (OR=0.48, 95% CI: 0.20-1.13, OR=0.24, 95% CI: 0.06-1.03, respectively) without significance. MECPP level was associated with increase conduct problems risk (OR=2.78, 95% CI: 1.36-5.68). Our analyses found no significant association between BPA or summation of phthalate metabolite levels and any of the behavioral problems at 5 years of age, however, suggested possible association between MECPP levels and increased risk of conduct problems.

An outbreak of occupational methanol poisoning occurred in small-scale 3rd tier factories of large-scale smartphone manufacturer, in the Republic of Korea, in 2016. To investigate the working environment and the health effect of the methanol exposure among co-workers of the methanol poisoning cases, we performed a cross sectional study on 155 workers at the five aluminum CNC cutting factories. Air and urinary methanol concentration were measured by gas chromatography, and health examination included symptoms, ophthalmological examinations and neurobehavioral tests. Multiple logistic regression analyses controlled for age and sex were conducted for revealing association of employment duration with symptoms. Air concentrations of methanol in factory A and E were ranged from 228.5 to 2220.0 ppm. Mean urinary methanol concentrations of the workers in each factory were from 3.5 mg/L up to 91.2 mg/L. The odds ratios for symptom of deteriorating vision and CNS increased, according to the employment duration, after adjusting for age and sex. Four cases with injured optic nerve and two cases with decreased neurobehavioral function were founded among co-workers of the victims. This study showed that the methanol exposure under poor environmental control not only produce eye and CNS symptoms but also affect neurobehavioral function and optic nerve.

The treatment of large-area bone defects remains a challenge; however, various strategies have been developed to improve the performances of scaffolds in bone tissue engineering. In this study, poly(lactide-co-glycolide)/hydroxyapatite (PLGA/HA) scaffold was coated with Asp-Gly-Glu-Ala (DGEA)-incorporated collagen for the repair of rat skull defect. Our results indicated that the mechanical strength and hydrophilicity of PLGA/HA scaffold were clearly improved and conducive to cell adhesion and proliferation. The collagen-coated scaffold with DGEA significantly promoted the repair of skull defect. These findings indicated that a combination of collagen coating and DGEA improved scaffold properties for bone regeneration, thereby providing a new potential strategy for scaffold design.

Statistical modeling lies at the heart of product design and development throughout numerous engineering disciplines, especially since processing large amounts of data has become increasingly ubiquitous. While mathematical statistics provide elegant guidance pertaining to the question of whether or not some particular underlying modeling assumptions are justified and appropriate, when pursuing a more comprehensive assessment of product design and development other considerations often increase in significance. Therefore, we will examine and analyze the tedious interactions and implications of statistical modeling choices and product liability exposure. To the best of our knowledge, this paper is the first to draw attention to and explore some often overlooked or oversimplified dangers and pitfalls that enter the equation when product design heavily relies on statistical modeling. In particular, through a diligent analysis of both statistical and legal aspects we will explore how statistically optimal procedures may yield far from optimal outcomes in terms of product liability when applied to actual real life problems and why suboptimal nonparametric or robust approaches may constitute better alternatives.

An effective method to inspect inaccessible nuclear power facility by interface wave which propagate along the shrink fit boundary of reactor head is proposed in this study. Reactor head is relatively thick to inspect from the outside of reactor by conventional ultrasonic testing. The proposed interface wave can propagate a long distance from the fixed transducer position. The inside of nuclear reactor is limited to access due to the high radiation, so transducers are located at outside of nuclear facility and interface wave propagates into the nuclear reactor for defect detection. The numerical simulation and experiments were carried out to validate the effectiveness of the proposed interface wave inspection method. Various defect cases simulating field failures are also presented with satisfactory detectability by the proposed technique with the features for defect classification.