A study was conducted to investigate the occurrence of Trypanosoma vivax infection in 72 Murrah buffaloes from Soure, a municipality located on Marajó Island. The aim of the research was to identify the presence of T. vivax in the buffalo population. Blood samples were collected, followed by DNA extraction and polymerase chain reaction (PCR) analysis using the primers TviCatL1 and DTO 155. T. vivax DNA was detected in one 36-month-old female with a body condition score of 2 (on a scale of 1 to 5), although the animal exhibited no clinical signs of infection. These findings suggest that T. vivax is not frequently circulating among the tested buffaloes, or that the animals may be in the chronic phase of infection, which is often characterized by low parasitemia levels. The identification of T. vivax in a clinically asymptomatic animal underscores the importance of using molecular diagnostics for early detection and monitoring of the parasite in buffalo herds, especially in regions where the presence of T. vivax may be underestimated. This study contributes to understanding the epidemiological status of T. vivax in buffaloes on Marajó Island, highlighting the need for ongoing surveillance in endemic areas.

Communication pathways are an underestimated source of synthetic particles in the environment. This study investigated the impact of traffic volume on microplastics (MPs) and tire wear particles (TWPs) pollution in road snow. An examination was conducted in a medium-sized city situated in northeastern Poland, known for being one of the cleanest regions in the country. MPs and TWPs were found at all 53 sites, regardless of the intensity of traffic. The average concentration for all samples was 354.72 pcs/L. Statistically significant differences were found between the average values of particles concentration on low, medium, and heavy traffic roads amounted 62.32 pcs/L, 335.97 pcs/L and 792.76 pcs/L respectively. Within all three studied groups of roads, MPs and TWPs with the smallest size, ranging from 50 to 200 μm, were prevalent. In all studied groups of roads, 4 analyzed shapes of particles were found, with irregular fragments being the most abundant form (89.23%). The most frequently recorded color among the collected samples was black (99.85%), and the least frequently recorded was blue, constituting only 0.01%. This study suggests that snow cover on the roads may act like temporary storage of pollutants during winter in the temperate climate zone and after thaw can significantly increase the concentration of MPs and TWPs in surface waters. Possible measures to decrease the release of MPs and TWPs into the environment in the city may include reducing traffic volume and speed, implementing street sweeping, utilizing filtration chambers, and installing stormwater bioretention systems or settling ponds.

Reverse osmosis (RO) and nanofiltration (NF) are ubiquitous technologies in modern water treatment, finding applications across various sectors. However, the availability of high-quality water suitable for RO/NF feed is diminishing due to droughts caused by global warming, increasing demand, and water pollution. As concerns grow over the depletion of precious freshwater resources, a global movement is gaining momentum to utilize previously overlooked or challenging water sources, collectively known as “marginal water.” Fouling is a serious concern when treating marginal water. In RO/NF, biofouling, organic and colloidal fouling, and scaling are particularly problematic. Of these, organic fouling, along with biofouling, has been considered difficult to manage. The major organic foulants studied are natural organic matter (NOM) for surface water and groundwater and effluent organic matter (EfOM) for municipal wastewater reuse. Polymeric substances such as sodium alginate, humic acid, and proteins have been used as model substances of EfOM. Fouling by low molecular weight organic compounds (LMWOCs) such as surfactants, phenolics, and plasticizers is known, but there have been few comprehensive reports. This review aims to shed light on fouling behavior by LMWOCs and its mechanism. LMWOC foulants reported so far are summarized, and the role of LMWOCs is also outlined for other polymeric membranes, e.g., UF, gas separation membranes, etc. Regarding the mechanism of fouling, it is explained that the fouling is caused by the strong interaction between LMWOC and the membrane, which causes the water permeation to be hindered by LMWOCs adsorbed on the membrane surface (surface fouling) and sorbed inside the membrane pores (internal fouling). Adsorption amounts and flow loss caused by the LMWOC fouling were well correlated with the octanol-water partition coefficient (log P). In part 2, countermeasures to solve this problem and applications using the LMWOCs will be outlined.

Excess associated gas from unconventional wells is typically flared while excess produced water is injected underground. In this work, flare gas recovery is integrated with produced water desalination and a solar pre-heater. The solar module with a beam splitter preheats the produced water. Aspen Plus was used to perform process modeling as well as to estimate capital and operating costs. The Solar-Flare Gas RDcovery- desalination (Solar-FGRD) process can conserve water resources and reduce the brine injection by 77%. The accompanying solar farm results in excess solar electricity for exporting to the grid. The process burner combustion efficiency (CE) is 99.8% with the destruction and removal efficiency (DRE) of 99.99% for methane as opposed to the flare CE of 80-98% (and a methane DRE of 91-98%). The greenhouse gas (GHG) emissions for CO2 and methane in terms of CO2 equivalent (CO2e) can be reduced by 45 % for US North Dakota & Texas flaring and 13% for North Sea flaring by employing the Solar- FGRD process. The comprehensive financial analysis demonstrates the financial-economic feasibility of the investment project with or without tax credits. Best-case and worst-case scenarios provide a realistic range that investors can consider before making investment decisions.

Microparticles derived from biomaterials are becoming increasingly popular for various applications, particularly in drug delivery systems. In this study, the water-in-oil (W/O) emulsification-diffusion method was used to create cellulose (C), silk fibroin (SF), and C/SF composite microparticles. We then observed the morphology of all obtained microparticles using scanning electron microscopy (SEM), evaluated their functional groups using attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), and conducted thermogravimetric analysis using a thermogravimetric analyzer (TGA). SEM micrographs indicated that the native SF microparticles have the highest spherical shape with smooth surfaces. With blue dextran, the C microparticle was smaller compared to the native microparticle, while the drug-loaded SF microparticles were bigger than the native microparticle. The morphological surfaces of the C/SF composite microparticles were varied in shape and surface depending on the C/SF ratio used. The spherical shape of the C/SF composite microparticle was increased as SF content increased. Furthermore, the size of drug-loaded C/SF composite microparticles was gradually increased by the SF content. The significant functional groups in the C and SF structures were identified based on the ATR-FTIR data, and a suggestion was made regarding the interaction between the functional groups of each polymer. When compared to both native polymers, the C/SF composite microparticles exhibit improved thermal stability. The C/SF composite microparticle at a 1:3 ratio had the lowest drug release content, whereas the hydrophilicity of the C microparticle affected the highest drug release content. As a result, one crucial factor affecting the medication released from the microparticle is its thermal stability. According to the obtained results, C, SF, and C/SF composite microparticles show promise as delivery systems for drugs with controlled release.

Achieving Urban Flood Resilience (UFR) is essential for modern societies, requiring the implementation of effective practices in different countries to mitigate hydrological events. Green Water Systems (GWS) emerge as a promising alternative to achieve UFR, but they are still poorly explored and present varied definitions. This article aims to define GWS within the framework of sustainable practices and propose a regulation that promotes UFR. Through a systematic review of existing definitions and an analy-sis of international regulations on Sustainable Urban Drainage Systems (SuDS), the study reveals diverse perceptions and applications of GWS and their role in Blue-Green Infrastructure (BGI). The research proposes a standardized definition of GWS and their role in Blue – Green Infrastructure (BGI). The research proposes a standardized definition of GWS and the implementation of SuDS in Peru, addressing the current knowledge gap and contributing to the development of sustainable urban infrastructure.

The growing threat of antibiotic pollution in water systems demands innovative and sustainable remediation strategies. Nanocellulose-based magnetic metal-organic frameworks (MOFs) represent a cutting-edge solution for the adsorption and removal of antibiotics, leveraging their high porosity, magnetic properties, and environmentally friendly nature. This paper provides an in-depth review of recent advancements in nanocellulose-based MOFs, focusing on their synthesis, adsorption mechanisms, and applications in environmental remediation between 2020 and 2024. By summarizing key studies, we highlight their performance in targeting widely used antibiotics such as tetracyclines and fluoroquinolones. The integration of nanocellulose with MOFs not only enhances adsorption capacity but also offers easy recovery, recyclability, and environmental compatibility. This review explores their adsorption mechanisms, practical applications, and future research directions, contributing to the advancement of scalable and sustainable water treatment technologies.

Corn is both the most important and nitrogen (N)-fertilized crop, but N losses from agricultural systems impact the environment. There is a lack of long-term data comparing effects of tilled systems receiving organic N fertilizer (TONF; e.g., manure) versus inorganic N fertilizer (TINF; e.g., urea) on N balance and losses. A long-term study assessing effects of TONF and TINF and comparing them to no till (NT) and strip till (ST) systems receiving inorganic nitrogen fertilizer (INF) was conducted with an irrigated continuous corn (CC) system with minimal erosion in Fort Collins, Colorado, USA. An N balance found a system nitrogen use efficiency (NUE_Sys) for TONF (manure) of 86.3%, which was higher than the NUE_Sys of TINF (enhanced efficiency fertilizer, EEF) of 60.2%. TONF (manure) contributed to higher HGY (2 of 11 yr.), higher C sequestration (P<0.05), and higher soil organic N content (P<0.05) than TINF. Soil phosphorus (P) and nitrate were higher with TONF than TINF (P<0.05). Both TONF and TINF had higher HGY and HGY N content (HGYN) than NT and ST (P<0.05). From 2012 to 2023, the HGY of the TONF did not decrease, while the HGY of TINF decreased with time (P<0.05). TONF is a best management practice to increase yields and N and C sequestration while reducing N losses compared to TINF and achieving higher yields than NT and ST. A combination of manure (30% of N input) with EFF (70% of N input) contributed to a synergistic effect that increased agronomic productivity.

No one can dismiss the fundamental role played by water in several important biochemical processes, including the folding of globular proteins. The so-called hydrophobic effect is the theoretical construction to rationalize how water molecules stabilize the folded state. However, over the years, analyses have been published that lead to the conclusion that water destabilizes the folded state. The aim of the present work is to state that the gain in translational entropy of water molecules (due to the decrease in water accessible surface area associated with folding) is the driving force of protein folding.

This study focuses on enhancing the prediction of flow characteristics in gas pipelines under hydrate-forming conditions using a validated CFD model. Four-Quadrants approach was introduced to analyse the relationship between gas and water flowrates, and to provide further insights into hydrate formation, agglomeration, deposition, and pipeline plugging. The analysis considered subcooling temperatures, water volume fractions, and gas velocities, to assess the risk of hydrate plugging in subsea gas pipelines. Results indicate that higher subcooling temperatures significantly increase the risk of hydrate formation and plugging, especially at lower gas velocities. At subcooling temperatures above 7.1 K, hydrate agglomeration and deposition become more pronounced, leading to a greater risk of plugging. Similarly, water volume fractions above 0.06 were found to increase the likelihood of hydrate blockages. However, higher gas velocities were shown to reduce this risk by promoting the sloughing of hydrates and preventing deposition. The findings align with existing literature and offer practical insights for flow assurance in gas pipeline operations.

This research delves into the water hammer occurrences, in the transmission pipeline of the SMD (Manda Daba) Multi Village Water Supply Schemes in Afar, Ethiopia. It utilizes simulation software, Bentley HAMMER version 8i to assess transient flow issues and the effectiveness of protective measures. The study pinpoints high risk areas in Scenario 1 marked by pressure spikes, negative pressures and frequent cavitation highlighting the importance of efforts. Prior to safeguards significant pressures reaching 288.27 m H₂O and minimum pressures dropping as low as 9.98 m H₂O are observed. In Scenario 2 where protective measures are implemented notable enhancements are seen with pressures ranging from 121.38 m H₂O to 150.49 m H₂O improved safety levels and substantial reductions in minimum pressures at pump stations. Moreover the study delves into Scenario 3 which explores pipe materials and diameters to provide insights, for pipeline design standards. It emphasizes how protective measures effectively mitigate water hammer effects while also highlighting cost saving potential by incorporating 2000 liter hydro tanks at pump stations. This integration leads to decreased pipeline collapses and maintenance expenses underscoring the significance of addressing challenges pinpointing failure causes and offering solutions to enhance system performance and strengthen reliability within the SMD water supply system

While significant efforts have been made to recycle metals like lithium or cobalt for sustainable development in the battery industry, other high-value materials in the renewable energy sector, such as fluorinated carbon nanotubes (FCNTs), have not been adequately explored for re-utilization after their quality has been downgraded. FCNTs are expensive and energy-intensive to produce, making their sustainable use crucial. This study explores the potential of reusing quality-downgraded fluorinated carbon nanotubes (QD-FCNTs) as eco-friendly nano-additives in microgel composites for water retention applications. By employing a surface treatment process that avoids additional energy costs and environmentally harmful chemicals, we successfully enhanced the interaction between QD-FCNTs and microgels. This treatment significantly improved water retention time by reducing rapid evaporation, enabling sustained water release. Our findings demonstrate a promising avenue for the sustainable application of quality-downgraded fluorinated carbon nanotubes in agricultural and environmental technologies.

Unevenly distributed rainfall leads to reduced potato water productivity (WP) under rainfed production. Understanding practices that can increase WP is vital. Objectives were to (i) understand seasonal variables that influence WP under rainfed conditions and (ii) the effect of the integration of cultivar, locality, mulch on potato WP. The study was under two agroecological zones Appelsbosch (Mbalenhle locality), and Swayimane (Stezi, and Mbhava locality), under smallholder. A split plot, in a randomized complete block design experiment, consists of mulching (mulch and not mulch), and selected cultivars. Soil water content (SWC), yield, and climatic conditions were collected, water use (ET) and WP were calculated. Rainfall, ET, and SWC had a significant influence on seasonal WP. Cultivar x mulch x locality had an insignificant effect on WP, however, locality x cultivars significantly altered potato WP. Localities that had lower vapor pressure deficit (VPD), low relative humidity, and sandy soil had higher potato WP of 14.53 kg m-3. The findings suggest that localities that have less atmospheric dryness and cultivars that show stability of yield across seasons can be an easy-to-apply practice for increasing potato WP under a resource-limited environment. Mulch is important when the distribution of intra-annual rainfall does not match crop water requirements.

: Information on the detection of the presence and potential for degradation of synthetic polymers (SPs) under various environmental conditions is of increasing interest and concern to a wide range of specialists. At this stage, there is a need to understand the relationship between the main par-ticipants in the processes of (bio)degradation of SPs in various ecosystems (reservoirs with fresh and sea water, soils, etc.), namely the polymers themselves, the cells of microorganisms (MOs) partici-pating in their degradation, and humic substances (HSs), which constitute a macrocomponent of natural non-living organic matter of aquatic and soil ecosystems, formed and transformed in the processes of mineralization of bioorganic substances in environmental conditions. Analysis of the main mechanisms of their influence on each other and the effects produced that accelerate or inhibit polymer degradation can create the basis for scientifically based approaches to the most effective solution to the problem of degradation of SPs, including in the form of microplastics. This review is aimed at comparing various aspects of interactions of SPs, MOs and HSs in laboratory experiments (in vitro) and environmental investigations (in situ) aimed at the biodegradation of polymers, as well as pollutants (antibiotics and pesticides) that they absorb. Comparative calculations of deg-radation velocity of different SPs in different environments are presented. A special place in the analysis is given to the elemental chemical composition of HSs, which are most successfully in-volved in the biodegradation of SPs. In addition, the role of photooxidation and photoaging of polymers under the influence of the ultraviolet spectrum of solar radiation under environmental conditions on the (bio)degradation of SPs in the presence of HSs is discussed.

This study presents a novel Fe-CNs-P/S carbon composite material, synthesized by doping elements P and S into NH2-MIL-101 (Fe) using carbonization method. The material's application in sustainable water treatment was evaluated, focusing on its effectiveness in activating persulfate for pollutant degradation. The research thoroughly investigates the synthesis process, structural characteristics, and performance in degrading pollutants. Results indicate that Fe-CNs-P/S-5 with 50% P and S co-doping is higher than that of other samples, where the degradation rate of TC in 30min is as high as 98.11% under the optimum conditions, that is temperature at 25 ℃, 0.05 g/L of catalyst concentration, and 0.2 g/L of PMS concentration. The composite material demonstrates robust versatility and stability, maintaining high degradation efficiency across multiple organic pollutants, with no significant reduction in catalytic performance after four cycles. Furthermore, the free radical quenching experiments displays that the singlet oxygen 1O2 is the main active species. It is demonstrated that the doping of P and S play a role in the enhancement of PMS activation over the Fe-CNs-P/S catalyst. This material demonstrates remarkable efficacy in treating a range of organic contaminants and exhibits excellent reusability, presenting a promising approach for enhancing sustainability in water treatment applications.

Traditional chemical research often relies on trial-and-error synthesis and characterization methods. Now, modern machine learning (ML) offers data-driven approaches for predicting properties, like water solubility, directly from chemical structure. But with various data representation schemes for molecular structure and model approaches to select from, it can be difficult for non-experts to determine best practices for utilizing ML. To clarify this landscape of choices, this study uses the ESOL molecular solubility dataset to compare the performance of a selection of different models on different data representations. First, we compare three classical regression methods (linear, ridge, LASSO) on three common data representations (RDKit fingerprint, Morgan fingerprint, intuition-selected molecular features). Then, we demonstrate how two distinct deep learning approaches (multilayer perceptron, graph convolution) can achieve accurate predictions even when prior intuition about feature-property correlations are absent. Finally, we outline a modern attention-based approach, inspired by successes in language modeling and fine-tuned by Bayesian optimization, to achieve a prediction methodology that is more general and performant than the previous approaches. This attention-based approach operates directly on the common SMILES string molecular representation, without requiring as many model parameters as other deep learning approaches or preprocessing into a representative fingerprint or vector of intuitively selected features. In short, when selected molecular features are known to likely correlate with a feature of interest, it may be possible to achieve good predictive modeling without turning to massive deep learning approaches. When particular features are not known a priori, graph approaches are a common solution, and we further demonstrate how a modern hyperparameter optimized attention approach can perform even better.

This study employed the Allium cepa bioassay to evaluate the toxic effects of contaminants in the Yucatan aquifer. Seven monitoring wells were studied during September and October 2021. Nutrient concentrations showed significant variation between sites, with samples closer to the coast (P3 and P7) presenting higher ammonia and phosphate concentrations. The pesticides found at the highest concentration were δ-HCH and chlorpyrifos, with 141.44 and 175.92 ng/L, respectively. Heptachlor and aldrin were present in sites P4oct and P2sept. Interestingly, DDT values were highly correlated with caffeine concentrations. Acenaphthylene, acenaphthene, fluorene, phenanthrene, and the sum of B(k)fluoranthene and B(b)fluoranthene presented the highest prevalence. B(k)fluoranthene and B(b)fluoranthene were the PAHs found at the highest concentration. The results of the A. cepa bioassay indicated no nuclear abnormalities. The study also found no statistical differences in the mitotic index, root length, biomarkers of oxidative stress, and inhibition of B-esterases between sites and controls. In summary, the wells sampled in the present study had low concentrations of contaminants that can be used as a proxy of anthropogenic discharges; the lack of effect in the biomarkers used at organism, cellular, and biochemical levels indicated no toxic effect on A. cepa roots.

This paper assessed rice farmers' perceptions of agricultural and irrigation practices through their choices. A survey was carried out among 278 rice farmers on five irrigation schemes in three agro-ecological zones of Togo, viz. the savannah region, the forest region and the coastal region. The sample of random respondents was selected from a list of rice farmers provided by the managers of these irrigated schemes. Data collected through face-to-face interviews using kobocollect software were analyzed with R 4.2 software, and the Pearson test was validated at the 5% level. The results showed that the socio-economic characteristics of the rice growers, such as access to agricultural credit, experience, non-agricultural activities, membership of a rice growers' cooperative, gender, level of education and training in growing irrigated rice, and farm labor, significantly influenced the choice of agronomic practices and irrigation management. Characteristics such as experience, training and hired farm labor enhanced paddy yields, while access to agricultural credit was unproductive. Chemical clearing combined with stump removal, tiller ploughing, transplanting and high plant density are the agricultural practices that increased paddy yields, while tiller mudding and basal mineral fertilization were inefficient. In the same way, water distribution by demand, water depth above the soil of less than 5 cm, use of water-saving technologies and farmer's knowledge of how to improve water and fertilizer use-efficiency also helped to boost paddy yields. For sustainable rice production in the context of labor shortages and the financial resources required, future studies will focus on the effectiveness of motorized mudding and agricultural credits for rice farmers. Furthermore, considering the crucial role of training in the adopting of good agricultural and irrigation practices, future research will study strategies for wide diffusion of knowledge to rice producers.

Water samples for bacterial microbiome studies undergo a biomass concentration, DNA extraction and taxonomic identification steps. Through benchmarking, we studied the applicability of Skimmed milk flocculation (SMF) for bacterial enrichment, an adapted in-house DNA extraction protocol, and six 16S rRNA databases (16S-DBs). Surface water samples from two rivers were treated with SMF and Vacuum filtration (VF) and subjected to amplicon or shotgun metagenomics. A mock community standard underwent five DNA extraction protocols, taxonomical identification with six different 16S-DBs and evaluated by the Measurement Integrity Quotient (MIQ) score. In SMF samples, the skimmed milk was metabolized by members of lactic acid bacteria or genera such as Polaromonas, Macrococcus, and Agitococcus, resulting in increased relative abundance (p &lt; 0.5) up to 5.0 log fold change compared to VF, rendering SMF inapplicable for bacterial microbiome studies. The best performing DNA extraction protocols were FastSpin Soil, the in-house method and EurX. All 16S-DBs yielded comparable MIQ scores within each DNA extraction kit, ranging from 61-66 (ZymoBIOMICs) up to 80-82 (FastSpin). DNA extraction kits exert more bias to the composition than the 16S-DBs. This benchmarking study presented valuable insights to inform future water metagenomic study designs.

The construction industry is shifting towards more sustainable practices to address environmental concerns. This review examines the impact of LEED certification on design-build projects, highlighting how the two work together to promote sustainability. By analyzing the article under review, we explore how LEED standards—such as energy efficiency, water conservation, and the use of sustainable materials—are incorporated into design-build projects to create environmentally responsible buildings. The article also discusses the benefits of the design- build approach, which encourages collaboration and early integration of sustainability principles. The review critically assesses the strengths and weaknesses of the article, emphasizing the importance of cost considerations and scalability. Ultimately, it underscores the value of combining LEED certification with design-build to promote green building practices.

Hydrogen has the potential to decarbonize the energy and industrial sector in the future, mainly if it is generated by water electrolysis. Proton Exchange Membrane water electrolysis (PEMWE) system is regarded as a propitious technology to produce green hydrogen from water using power supplied by renewable energy sources. It offers many benefits such as high performance, high proton conductibility, quick response, compact size, and low working temperature. Many conceptual and functional parameters influence the effectiveness of PEM, including temperature, pressure of anode and cathode regions, water content and wideness of layer, and cathode and anode exchange current density. In addition, the anodic half reaction (known as oxygen evolution reaction (OER)), and cathodic half reaction (known as the hydrogen evolution reaction (HER)) perform an important function in the development of PEMWE. The current paper aims at presenting these parameters and discussing their impacts on the performance of PEM. Also, the PEM efficiency is presented. The different methods used to enhance the scattering of OER electrocatalyst and minimizing catalyst loading to minimize the price of PEMWE are also highlighted. Moreover, the alternative of noble metals that could be used as electrocatalyst in HER and OER to minimize the cost of PEM are reviewed and presented.

Sustainability in construction has emerged as a critical focus in response to growing environmental challenges. This article review explores the intersection of LEED (Leadership in Energy and Environmental Design) certification and design-build construction, highlighting how these two frameworks enhance sustainability in the built environment. By examining the findings of a selected article, the review emphasizes the advantages of LEED certification in promoting energy efficiency, reducing waste, and improving overall environmental performance. The design-build method, with its integrated and collaborative approach, complements LEED’s objectives by ensuring that sustainability is prioritized from the initial planning stages. This review also critically analyzes the strengths and limitations of the article, including its coverage of cost-related challenges and the applicability of LEED in diverse project scales. Ultimately, the review underscores the significant role that LEED certification plays in advancing sustainable construction practices, particularly within the design-build model.

This review explores the transformative role of artificial intelligence (AI) in the entire winemaking process, from viticulture to bottling, with a particular focus on enhancing food safety and traceability. It discusses AI’s applications in optimizing grape cultivation, fermentation, bottling, and quality control, while emphasizing its critical role in managing microbiological risks such as mycotoxins. The review aims to show how AI technologies not only refine operational efficiencies but also raise safety standards and ensure traceability from vineyard to consumer. Challenges in AI implementation and future directions for integrating more advanced AI solutions into the winemaking industry will also be discussed, providing a comprehensive overview of AI's potential to revolutionize traditional practices.

Interstitial pneumonia is a general term for diseases in which inflammation occurs mainly in the interstitium of the lung. It is also pointed out that interstitial pneumonia reduces alveolar function and makes it difficult to take in oxygen through inspiration, causing symptoms such as dyspnea and coughing, which may eventually lead to respiratory failure. At present, there is no effective treatment and only conservative treatment exists. This time, we report that the therapeutic effect was confirmed in patients with interstitial pneumonia who took platinum-palladium. In this case, improvement tendencies were observed in patients with Idiopathic pulmonary fibrosis (IPF), but improvement tendencies were also observed in many other lung diseases. In order to explore the mechanism, AMPK was measured at the in vitro level, and blood KL-6 and hydrogen peroxide levels in the patient were measured at the in vivo level. AMPK values were significantly elevated by more than 800%, KL-6 and hydrogen peroxide levels were also significantly decreased by drinking platinum-palladium. Platinum-palladium exhibits a strong antioxidant effect and is the only substance in the world that can approach all four types of active oxygen. In addition, when it was actually administered to patients, there were cases of dramatic improvement, and it was confirmed that KL-6, a parameter of lung function, decreased in 16 out of 32 patients As the number of cases is expected to increase in the future, the substance is expected to be effective as a drug, although it is currently classified as a soft drink.

Coastal environments, of major economic, social, and strategic importance, rely heavily on bathymetry for navigation safety, harbor development, and resource monitoring. Innovations in bathymetry include optical alternatives for shallower waters, as traditional acoustic solutions are less efficient. Recent studies demonstrated airborne imagery is an efficient option to frequently map shallow waters at synoptic scales and has the capacity to retrieve the Water Column Depth (WCD). Geometric approaches allow to obtain 3D reconstruction from images by triangulating a set of pixels that are located on more than one image (feature points). They demonstrate great potential for WCD assessment, achieving a penetration depth of over 5 meters with an accuracy in the decimeter range when creating high resolution maps of clear shallow water bodies as long as there is sufficient bottom texture with identifiable features. As the navigation safety of vessels relies on WCD accuracy, it is of utmost importance to quantify the uncertainty associated with the derived product. Studies on bathymetry estimation using geometric approaches tend to focus on the estimation accuracy, rather than the assessment of uncertainty, despite the fact that there are many sources of uncertainty. As a result, here is a lack of robust uncertainty modeling methods, crucial for assessing the quality of bathymetric charts, especially in shallow waters. In response, this research introduces a novel likelihood-based approach for through-water photogrammetry with a focus on the uncertainties associated with camera pose, a key factor affecting through-water depth mapping. Our methodology incorporates probabilistic modeling and stereo-photogrammetric triangulation. In addition to providing a realistic estimate of the uncertainty, this approach allows to handle complex cases involving noisy camera poses in addition to retrieving the water interface height. The results proposed in this paper reveal the significant influence of viewing geometry and camera pose quality on the resulting uncertainties, overshadowing the impact of depth. In addition, they demonstrate the superior performance of the likelihood ratio statistic in scenarios involving high attitude noise, high flight altitude, and complex viewing geometries. Also, we highlight the transformative potential of drone-based applications in underwater surveying, leveraging high-precision and efficient data collection to contribute to more accurate bathymetric charts.

The purpose of this paper is to compare various indicators of microbiological contamination in coastal areas near estuaries around the world. A major factor contributing to the presence of fecal coliforms is the geomorphology of the area, and, more particularly, whether the area concerned is an open or enclosed bay, the climate of the area, its tourism development, and, lastly, the urban, agricultural, livestock, or industrial activities carried out near river mouths. The aim was also to attempt to systematize the microbiological contamination of the above – mentioned estuaries around the world for broader applicability. The method used and the experimental apparatus for the isolation of bacteria was the membrane filtration method described in ISO 7704:1985. For the growth and enumeration of total coliforms and Escherichia coli the method described in ISO 9308-1 was used, while for enterococcus the one described in ISO 7899-2:2001. No statistically significant difference was found at many points in Greece and Spain, for either of the two patho-genic bacteria. In this work, the documentation of the microbiological contamination of river del-tas was achieved in similar areas (Greece and Spain) and could be applicable throughout the Mediterranean.

Within the research of pressure pipeline inspection methods there is an industry that is constantly growing and becoming more efficient. The purpose of inspection methods on pressure pipelines comes back to the issue of resolving leaks, corrosion, and inability of a pipeline to function (eventually). Evidently, these issues can hurt the environment, the public using the material being carried out by these pressure pipelines such as natural gas or petroleum and can hurt the pockets of pipeline companies that did not react quick enough to their pipeline solely for the reason that they may have not noticed there was an issue with their pressure pipeline. In-line inspection methods are continuously growing and have already made an impact to prevent the catastrophes that occur when a pipeline is not maintained. Technology such as smart pigs, MFLs, and ultrasounds are the future of pressure pipeline inspection. This research paper explains their pros and cons and how they’re overall more efficient and preferred as the primary inspection method for a pipeline. Older, more traditional methods such as aerial inspection, by-foot inspection, hydrostatic pressure testing, and Direct Assessment does not cover every base of inspection like in-line inspection technology does and this research explains why that is and the areas of where in-line inspection technology can be improved and deemed not as useful. This is where trenchless renewal and replacement methods come into play with inspection methods and determining the characteristics of a pipeline that matches with which inspection method and which trenchless method to use. The future of inspection methods for pressure pipelines is attainable and is somewhat already here, this research discusses the new emerging technologies and how designing in-line inspection technology to be cheaper and more versatile with pipeline characteristics can make everyone a winner in the future. A winner as far the environment being safe, neighborhoods near pressure pipelines being safe, companies being able to install in-line inspection technology at a fraction of the cost of today and the efficiency of pipelines by monitoring the characteristics with this new technology.

This paper proposes Pierre Bourdieu's sociological concepts of social field, capital, and habitus to analyze water management in Colombia. By mapping the social dynamics of water management, this study examines the interactions and power relationships among agents, including government agencies, private companies, academic institutions, non-profits, and local communities. The analysis reveals how various forms of capital, such as economic, cultural, social, and symbolic, influence water management practices, policies, and the distribution of power. Integrating agent-based modeling with hydrological simulations provides a more nuanced understanding of how social dynamics influence water management. This interdisciplinary approach helps develop more adaptive and equitable strategies by capturing the complex interactions between human behavior and environmental factors. The research demonstrates that agent-based modeling, informed by Bourdieu's sociological framework, offers valuable insights for policy development in regions facing socio-economic and environmental challenges. The study highlights the need to localize the analysis of the social field to capture regional customs and specific social dynamics. This localized approach ensures that water management strategies are more relevant, context-sensitive, and sustainable. This paper advocates for the wider adoption of agent-based modeling in water management, proposing a methodology that combines the engineering principles of practical problem-solving and adaptive design with an understanding of the social complexities in water management.

Energy generation now heavily relies on the field of photocatalysis. Many conventional research topics have been superseded by the conversion of solar energy into chemical or thermal energy for a variety of energy-related applications. The urgent necessity of moving away from non-renewable energy sources is a result of the problem of global warming. In an effort to create the best photocatalysts for effective solar conversion, scientists are investigating a variety of material systems and material combinations. By examining the influence of morphology changes on the photoelectrochemical activity of zinc oxide nanostructures, here electrodeposition was used to create the nanostructures. By using the proper capping agents, it is possible to control the growth rates of different ZnO facets and get well-defined nanostructures and orientation. In order to generate distinct ZnO morphologies, we report here the electrodeposition of ZnO nanostructured thin films in the presence of different capping agents. A zinc nitrate (Zn (NO₃)₂) bath was used to electrodeposit ZnO nanostructures on indium tin oxide glass (ITO) substrate at 70 °C with an applied potential of -1.0 V. Capping agents such as ethylenediamine (EDA) or ammonium fluoride (NH₄F) were added to this zinc nitrate bath. The photoelectrochemical capabilities of the morphology-controlled zinc oxide nanostructures were extensively evaluated and characterised. Thus various ZnO morphologies had an impact on the PEC properties.

This work aims to investigate the impact of chemical treatment of Juncus acutus fibers on the hygric and mechanical performances of an innovative bio-sourced clay-sand-Juncus acutus fibers composite. This lightweight specimen has been produced from a mixture of 60 % natural clay and 40 % sand by mass, as a matrix, and reinforced with different amounts of Juncus fibers. The fibers were used as a partial replacement of sand in mixture by volume at 0 % (Control Specimen), 5 %, 10 %, and 20 %. In order to enhance the fiber-matrix interfacial bound, the raw fibers have undergone an NaOH alkali treatment with different concentrations of 1, and 2 wt. %. Morphological and mineralogical evaluation based on SEM micrographs and EDX analyses revealed that, the alkaline concentration of 1 wt. % is the optimized one for natural fiber surface modifications (removal of impurities without any surface damage). This optimal concentration is confirmed by tensile strength tests, showing that the treated fibers with this alkali solution presents the higher tensile stress value of 81.97 MPa, compared to those of treated fibers with 2 % NaOH (74.45 MPa), and the untreated fibers (70.24 MPa). However, mechanical test-results highlighted the benefit effect of the fiber alkali treatment on both the compressive and flexural strengths, particularly for fiber contents of 5 % and 10 %, which corresponds to a strengthening rate of 25 % and 30 %, respectively. Results also showed that the sample containing treated fibers exhibited a better moisture regulating property than that produced with untreated fibers. The specimens are classified as excellent hygric regulator based on their moisture buffer performance (MBV > 2 g/(m2.%RH)), according to NORDTEST classification. Results also indicated that the capillary water absorption and the apparent moisture diffusivity of composites was lowered due to high fiber-matrix interfacial bound, after fiber treatment. Consequently, the composite with treated fibers is less diffusive compared to that with untreated fibers, and thus expected to be more durable in a humid environment. These results were confirmed by morphological analysis of fibers-matrix interfacial transition zone.

With the aim of developing an innovative water treatment approach for developing countries in the Global South, we have applied the method of treating a cavitating water stream with a plasma discharge under real conditions. To this end, we have optimised the approach after investigating the effects that occur in the treated medium during such a treatment. Based on the obtained light absorption curves of treated model solutions of titanium oxysulphate and potassium bichromate, it was found that inside the reactor the main role in the destruction of chemical contaminants is played by hydroxide ions, while outside the reactor the main chemical interaction takes place with hydrogen peroxide. The plasma treatment unit was tested in the biological wastewater treatment plants of a health resort on the territory of the Russian Federation (Almetyevsk, Republic of Tatarstan). Water samples taken directly from the tertiary decantation tank were used as real wastewater samples instead of adding chemical reagents for disinfection. It was found that with different modes of operation of the plasma treatment plant, the concentration levels of coliform bacteria, coliphages and Escherichia coli decrease significantly and fall below the limit of permissible concentrations for wastewater discharge. At the same time, the possible effect of the plasma on persistent inorganic compounds was investigated. It was shown that the plasma discharge in the flow of the incoming liquid can almost completely destroy compounds that are difficult to remove, such as hydrogen sulphide and chlorides. In the course of the study, the optimum frequency of the electrical pulses of 68 kHz was selected, which ensures the lowest consumption of electrical energy while maintaining the required efficiency.

Cooperative and self-enforceable water allocation is a key instrument to manage geopolitical conflict induced by water scarcity, which necessitates concerning the cooperative willingness of the agents and considering their heterogeneity in geography, climate, hydrology, environment and social economy. Based on a multi-indicator system that contains asymmetric information on water volume contribution, current water consumption, water economic efficiency and efforts for eco-environmental protection, this study proposed a water allocation framework by combining the asymmetric power index approach with bankruptcy theory for solving the transboundary water allocation problem under scarcity. The proposed method was applied to the Yellow River Basin in northern China, which is mainly shared by nine provincial districts and frequently suffers from severe water shortage, and its results were compared with six alternative methods. The results highlight the necessity of quantifying agent’s willingness to cooperate under the background of asymmetric negotiation power when making decisions on transboundary water allocations. The proposed method allows to perform transboundary water allocations through simultaneous consideration of the agent’s cooperation willingness, asymmetric negotiation power as well as disagreement allocation points, which ensure the stability, fairness and self-enforceability of allocation results. Therefore, it can offer practical and valuable decision-making insights for transboundary water management under water scarcity.

Vibrio vulnificus (Vv) is a bacterial pathogen native to warm and brackish water ecosystems that can cause fatal septicemia (Vv-vibriosis) in humans and various farmed fish species. From a One Health perspective, controlling Vv-vibriosis outbreaks on farms is essential not only for animal but also for human health, as it reduces the risk of Vv transmission to humans. Electrolyzed water (EW) is a sustainable control method, exhibiting transient disinfectant properties due to the formation of hypochlorous acid (HOCl). We hypothesized that EW could effectively reduce Vv populations in aquaculture facilities, preventing outbreak emergence. To test this hypothesis, survival assays in EW were conducted under varying conditions of salinity, pH, and free available chlorine (FAC). The results indicated that an intermediate concentration of FAC had a significant bactericidal effect on Vv populations regardless of the condition and tested strain. Consequently, the strategic use of EW could serve as an eco-friendly preventive and control measure against Vv-vibriosis by significantly decreasing the bacterial load in farm water.

Electrolyzed water, which mainly contains hypochlorous acid, is widely used because of its strong microbicidal effects, biosafety, and eco-friendliness. For frequent use in intraoral treatments, we focused on neutral electrolyzed water (NW) produced using two-stage electrolysis and investigated its storage stability. For standard-concentration NWs with free available chlorine concentration (ACC) of 25, 35, and 50 mg/L and high-concentration NWs (100, 200, 300, 500, and 1000 mg/L), changes in the pH, oxidation-reduction potential, and ACC during 126 days of storage and the bactericidal efficacies were examined. Storage under non-shaded conditions at room temperature (LRT) and a higher ACC substantially altered the properties of the NW. NW (≤ 300 mg/L) had a pH of 5.9–7.3 even after storage under LRT; however, NW with higher ACC (500 and 1000 mg/L) had a pH ˂ 5.5, critical for human enamel), even under shaded and refrigerated conditions (SLW). Only NW (25 mg/L) stored under LRT exhibited the lowest ACC (5 mg/L), indicating a decreased bactericidal effect. When stored for use in intraoral treatments, NWs should be prepared with an ACC of 25–300 mg/L and stored in SLW. If diluted NW is used, the ACC should be checked and appropriately diluted every time.

Water quality control employs techniques mostly targeting individual analytes; group detection is also practiced, but the choice of group methods is limited, which supports interest in developing such methods. We have examined an interaction of hypochlorite with a chlorine-containing heptamethine carbocyanine dye in the presence of 30 organic and inorganic model analytes that were found to induce diverse color changes in the system. The main supposed mechanisms are retardation of the dye oxidation with hypochlorite (presumably by scavenging chlorine radicals) and substitution of chlorine atom in the dye by the most nucleophilic analytes (amines, amino acids, proteins, DNA, phenol). The grass-green substitution product is more contrastingly visible against the dark-purple hypochlorite oxidation product of the dye than against the original emerald-green dye. The indicator reaction is monitored photographically for 10–40 min and the images are processed using principal component analysis (PCA) or linear discriminant analysis (LDA), allowing for data convolution for the complex color transitions. Nitrogen compounds are discriminated from the others, and more reactive analytes (tryptophan, cysteine, bovine serum albumin, and DNA) are detected in the presence of less reactive ones in natural water. The system is promising for the development of group assays for dissolved organic matter and discrimination of water samples.

The earth infrastructure is the backbone of the global economy, connecting people, enhancing quality of life, and promoting health and safety. However, its vulnerabilities are becoming apparent due to climate change, mainly through frequent wetting and drying (wd) cycles. This study aimed to assess the impact of controlled w-d cycles on the hydromechanical properties of clayey and silty sand soils and its implications for the performance of a typical flood embankment. Volumetric changes were monitored during the w-d cycles. Soil water characteristic curve (SWCC), saturated hydraulic conductivity (ksat), effective cohesion (c’) and effective angle of internal friction (ϕ’) were measured at 1 and 10 w-d cycles. The results indicated that the 10 w-d cycles decreased the saturated moisture content and a flatter SWCC compared to the 1 w-d cycle for clayey soil. The ksat was also significantly higher at 10 w-d cycles than the 1 w-d cycle for clayey soil. An insignificant difference was found in both SWCC and ksat at 1 and 10 w-d cycles for silty sand soil. The ϕ’ for the clayey soil decreased from 28.5 to 20.1 as the wd cycles increased from 1 to 10, while the c’ remained unchanged at 10 kN/m2. On the other hand, for the silty sand soil, the ϕ’ increased from 34.6 to 37.5 with an increase in w-d cycles from 1 to 10, and the c’ remained constant at 1 kN/m2. Numerical modelling of transient water flow coupled with slope stability analysis revealed the dependence of flood embankment performance on the soil's hydromechanical properties and the flooding duration. These findings underscore the need for proactive measures to mitigate landslide risks in regions prone to frequent w-d cycles, thereby ensuring the safety and resilience of slopes and associated infrastructure.

Roof and roofings built to protect the housing and homeowner from undesirable rainwater, have been seen an important structural element throughout history in the entire of housing. In this research, structural and spatial relationships between building envelope with isolation from water in traditional housing architecture are analyzed. Roof, eaves and rain gutters which are isolation from water items were investigated according to shapes, slope direction, materials, carrier systems and covering materials. The qualification of the roofing, eave and rain gutter elements which are equipment elements related to the comfort of the building envelope and the extent of changes in these elements were examined at the traditional housing level. Exemplary, the traditional housing in the city of Trabzon in Turkey were selected. During the completion process of the working, detailed aims related to structure-health reinforcements were specified with the relevant literature review. The chart form has been developed for compilation of information about the general characteristics of the housing in the research area and the building-health reinforcements within the aim of the research. Exemplary houses were selected by external observation technique and the data obtained as a result of observations, interview and determinations related to general characteristics and building-health reinforcements of these housing were handled into a chart form. By evaluating the data obtained; harmony and contrasts in system level practices, the dimensional properties of the elements at the spatial level, the greatness and accuracy levels preferred in various fittings, the harmony and contrasts in the materials, dimensions and practices of the elements at the system and spatial level, harmony and contrasts of applications of new opportunities at the level of building-health reinforcements in traditional housing, conclusions were drawn to identify special and general situations at the level of building-health reinforcements and to obtain information about the comfort requirements of traditional housing. Nowadays, where the health of the building, which is mostly ignored, is gaining importance day by day, concrete and applicable solution data are presented and interpreted for new designs to be made in this direction.

The role of trees in watershed hydrology is governed by many environmental factors along with their inherent characteristics and not surprisingly has generated into diverse debates in the literature. Herein, this state-of-the-art review provides an opportunity to propose a conceptual model for understanding the role of trees in watershed hydrology and examine the conditions under which they can be an element that increases or decreases water supply in a watershed hydrology. To achieve this goal, this review addressed the interaction of forest cover with climatic conditions, soil types, infiltration, siltation and erosion, water availability, and the diversity of their ecological features. The novelty of the proposed conceptual model highlights that tree species and densities, climate, precipitation, type of aquifer, and topography are important factors affecting the relationships between trees and water availability. This suggests that forests can be used as a nature-based solution for conserving and managing natural resources, including water, soil and air. To sum up, forests can reduce people’s imprint, thanks to their role in improving water and air quality, conserving soil, and other ecosystem services. The outcomes of this study should be valuable for decision-makers when investing in reforestation in a watershed hydrology.

A one-dimensional numerical overland flow model based on the cascade plane theory was de-veloped to estimate rainfall-induced runoff and soil erosion on converging and diverging plane surfaces. The model includes three components: (i) soil infiltration using Horton’s infiltration equation, (ii) overland flow using the kinematic wave approximation of the one-dimensional Saint-Venant shallow water equations for a cascade of planes, and (iii) soil erosion based on the sediment transport continuity equation. The model’s performance was evaluated by comparing numerical results with laboratory data from experiments using a rainfall simulator and a soil flume. Four independent experiments were conducted on converging and diverging surfaces under var-ying slope and rainfall conditions. Overall, the numerically simulated hydrographs and sediment graphs closely matched the laboratory results, showing the efficiency of the model for the tested controlled laboratory conditions. The model was then used to numerically explore the impact of different plane soil surface geometries on runoff and soil loss. Seven geometries were studied: one rectangular, three diverging, and three converging. Constant soil surface area, rainfall intensity, and slope gradient were maintained in all simulations. Results showed that increasing convergence angles led to higher peak and total soil loss, while decreasing divergence angles reduced them.

Flood protection infrastructures are crucial for enhancing the resilience of societies exposed to natural hazards. Newly designed infrastructures are evaluated for sustainability using a coherent and internationally recognized method defined by the International Hydropower Association (IHA). However, older structures require a different assessment approach. Popescu et al. (2024) proposed a modified IHA protocol, mHSAP, which identifies opportunities for improvement and develops a sustainability evaluation framework for existing infrastructures. This paper applies the modified protocol to evaluate the sustainability of two types of flood protection structures: a unique canal system for flood-drought protection of an urban area and a flood protection dyke. The time of operation of over 250 years, and respectively over 50 years. The application of the modified framework demonstrates its advantages in identifying areas for improvement in operating the flood protection structure, such that it is maintained sustainable. It also illustrates how Romanian water boards can use such tools to facilitate collaboration between structure owners and stakeholders, allowing them to assess the risks and effects of flooding on society. Potentially water boards, could use the results of the method to account for the effects of climate change and addressing the issue in a coordinated and efficient manner. Through these two examples from Romania, we also show that the mHSAP framework has the potential to actively support the fulfillment of the United Nations Agenda 2030 Sustainable Development Goals (SDGs).

This study presents a reproducible and scalable method for synthesizing silica nanoparticles (SNPs) with controlled sizes below 200 nm, achieved by systematically varying three key reaction parameters: ammonium hydroxide concentration, water concentration, and temperature. SNPs with high monodispersity and controlled dimensions were produced by optimizing these factors. The results indicated a direct correlation between ammonium hydroxide concentration and particle size, while higher temperatures resulted in smaller particles with increased polydispersity. Water concentration also influenced particle size, with a quadratic relationship observed. This method provides a robust approach for tailoring SNP sizes, with significant implications for biomedical applications, particularly in drug delivery and diagnostics. Using eco-friendly solvents such as ethanol further enhances the sustainability and cost-effectiveness of the process.

This study investigates the cooling effects of water facilities installed in urban parks, focusing on Sangju Namsan Park. The park features a water path and a cooling fog system, introduced as part of an environmental adaptation project to mitigate urban heat. Microclimate data were collected during the hot summer months of 2023 to assess the impact of these facilities on air temperature, humidity, and perceived thermal comfort. Results indicate that the water path and fog system reduced surface temperatures by up to 1.08°C, with additional benefits in reducing fine particulate matter and CO2 levels. The findings suggest that strategically placed water features can enhance thermal comfort and air quality in urban parks, offering a practical approach to climate change adaptation in urban planning. These insights are crucial for urban planners and policymakers aiming to improve public health and quality of life in the face of climate change.

This study investigates the sociological dimensions informing public perceptions of water scarcity during the El Niño drought period in Colombia. We conducted this study in Santa Marta, Colombia, and surveyed 405 urban and rural residents to understand their perceptions of water scarcity, management, and the impacts of the El Niño phenomenon. The survey used a Likert scale to measure responses and employed a multivariate analysis of variance to analyze the data while considering factors such as location (urban versus rural) and gender. The study results indicated that urban residents often experience an irregular water supply all year, whereas most rural respondents noted a more consistent availability of water. The perception of water scarcity also differed notably between urban and rural areas due to their different historical and cultural experiences (habitus). Urban respondents mostly recognized the presence of water, while rural perspectives were less conclusive, likely influenced by their direct access to natural water sources. Participants across various demographics consistently reported that poor management by local, regional, and national governments contributes to the water scarcity crisis, highlighting the widespread call for urgent reforms in water management policies and practices. Our research suggests that better understanding the social foundations of such perceptions using Bourdieu's concepts of social fields, habitus, and capital forms can significantly enhance water management strategies.

The wastewater problem is becoming an increasingly significant environmental issue affecting various aspects of human activities. The generation of reactive oxygen species (ROS) in water through certain physicochemical processes, which can oxidize or degrade various organic and chemical compounds, offers an effective purification method. The main advantage of these methods is the elimination of chemical reagents. Aim of this work is to investigate the possibility of regulating the ROS content in water by altering the characteristics of the plasma discharge that occurs under hydrodynamic cavitation in the water flow. ROS concentration was determined using the permanganate oxidation titration technique. It was found that the content of various reactive oxygen species in water after treatment can be controlled by varying the power of the electrical pulses applied. Additionally, the study obtained the dependence of ROS concentration in treated water samples on storage time, indicating a prolonged effect of sonoplasma treatment on the antibacterial properties of water. Analysis of water samples using a biological test culture of Salmonella typhimurium revealed bacteriostatic properties of the water for at least 48 hours after sonoplasma discharge treatment.

Methylene blue (MB) is a dye hazardous pollutant widely used in several industrial processes that represents a relevant source of water pollution. Thus, the research of new systems to avoid its environmental dispersion, represents an important goal. In this work, an efficient and sustainable nanocomposite material based on green gold nanoparticles for MB water remediation, was developed. Starting from reducing and stabilizing characteristics of compounds naturally present in Lambrusco winery waste (grape marc) extracts, green gold nanoparticles (GM-AuNPs) were synthesized and deposited on a supporting membrane to create an easy and stable system for water MB decontamination. GM-AuNPs, with a specific plasmonic band at 535 nm, and the modified membrane were firstly characterized by UV-vis spectroscopy, X-Ray diffraction (XRD), and electron microscopy. Transmission electron microscopy analysis revealed the presence of two breeds of crystalline shapes, triangular platelets and round-shaped pentatwinned nanoparticles, respectively. The crystalline nature of GM-AuNPs was also confirmed from XRD. The photo-catalytic performance of the modified membrane was evaluated under natural sunlight radiation obtaining a complete MB degradation (100%) in 116 minutes. A pseudo-first-order kinetic described the photocatalytic process with a rate constant k equal to 0.044 ± 0.010 min-1. The modified membrane demonstrated high stability since it was reused, without any treatment, for 3 months and for at least 20 cycles maintaining the same performances. GM-AuNPs-based membrane was also tested with other water pollutants (methyl orange, 4-nitrophenol and rhodamine B revealing a high selectivity towards MB.

Umbria is an Italian region with a highly fragmented water supply, with many small water distribution systems fed by local sources. The chlorination in these small water systems faces many difficulties related to the high demand variation, low economic relevance, and access to infrastructures. As a result, there are many noncompliances with the quality of the supplied water, which causes a decrease in the performance indicators and tariff. This research investigates the possibility of using a low-cost chlorination system to consider different environmental conditions (e.g., temperature variations of water and environment, pH, ...) and discontinuous consumption. A device for this specific use is developed and tested by laboratory tests and is ready for use in the field.

The study on the sustainable utilization capacity of water resources is of great significance for the realization of sustainable water resources management and development in the water-scarce regions of Northwest China. It provides insights into the potential for sustainable utilization of these resources. To evaluate the sustainable utilization capacity of the Huangshui Basin, a comprehensive evaluation index system was constructed based on three aspects: climate factors, water resources systems, and socio-economic factors. The evaluation was conducted using two methods: the fuzzy comprehensive evaluation model and the ELECTRE III evaluation method. The results indicate that the Huangshui Basin's water resources, as a whole, exhibit a medium sustainable utilization capacity. Climatic factors and socio-economic characteristics are the main factors affecting the sustainable utilization of water resources in the Huangshui Basin. Based on the results, measures such as strengthening the introduction of external water resources, enhancing water resources management, and implementing comprehensive remediation efforts in the basin can improve the level of sustainable use of water resources. The research results can provide a reference for decision-making regarding the evaluation of sustainable utilization capacity of water resources in water-scarce areas and the optimization of water resources management in the Huangshui Basin.

China has enacted a range of policies to improve its water ecosystem since the middle of the 20th Century. Some of these measures include the creation of Seven River Conservancy Commissions, the development (combination and recombination) of series of ministries and departments to address environmental pollution and degradation, and recently the implementation of the river chief system. To understand if the river chief system can transfer to other political jurisdictions the authors gathered data using key word searches of the Web of Science and Google Scholar, official government sites, media sites and key international organizations. Based on this the authors review the development of the river chief system in the context of broader ecological reforms, place the rise of the river chief in the context of potential lessons for future improvement, and speculate on the possibility that China could transfer the river chief to countries facing similar challenges in their water governance regimes.

In Mexico, 1.9% of child mortality among children aged 3 to 15 years is attributed to waterborne gastrointestinal diseases (WGD). This study employs a generalized bivariate logit econometric model to simulate the relationships between mortality risks and seven explanatory variables. Based on the model results and sensitivity analysis of the estimated parameters, a set of policies was designed to reduce the likelihood of child mortality. The proposed strategy involves im-plementing the following public policies, primarily targeting communities with extreme and high marginalization: increasing access to drinking water, improving housing conditions, expanding parental basic education coverage, and providing nutrition and healthcare to children from an early age. The findings reveal that children who speak an indigenous language face a mortality risk from WGD that is three times higher than those who do not, while children who receive medical services have a 29% lower risk of mortality compared to those who do not have access to them. It is recommended to offer free medical care in indigenous languages within high-marginalization communities. The combined impact of these policies is expected to signifi-cantly reduce child mortality due to WGD.

In this contribution, the propylamine-functionalized cellulose (Cell-Pr-NH2) was employed as the catalyst in the three-component reaction between hydroxylamine hydrochloride, various type of aryl/heteroaryl aldehydes, ethyl acetoacetate/ethyl 4-chloroacetoacetate/ or ethyl 3-oxohexanoate. The results of these experiments were the formation of 3,4-disubstituted isoxazol-5(4H)-one heterocycles. The desired five-membered heterocyclic compounds were obtained in good to high yields at room temperature. The investigation of different solvents led us to the conclusion that water is the best solvent to perform the current one-pot, three-component reactions. Attempts to find the optimum catalyst loading clearly showed that 14 mg of Cell-Pr-NH2 seems to be sufficient to carry out the reactions. This method has highlighted some principles of green chemistry including less waste generation, atom economy, use of water as an environmentally friendly solvent, and energy saving. Purification without chromatographic methods, mild reaction conditions, simple work-up, low-cost reaction medium, saving time, and obtainable precursors are other notable features of this one-pot fashion.

The Normalized Differential Spectral Attenuation (NDSA) technique was proposed years ago as an active method for measuring Integrated Water Vapor (IWV) along a Ku/K-band radio link immersed (totally or partially) in the troposphere. The approach is of the active kind, as it relies on the transmission of a couple of sinusoidal signals, whose power is measured at the receiver, thus providing the differential attenuation measurements from which IWV estimates can be in turn derived. In 2018, a prototype instrument providing such differential attenuation measurements was completed and set up for a first measurement campaign aimed at demonstrating the NDSA method. By the end of June 2022, the instrument was profoundly modified and upgraded so that a second measurement campaign could be carried out from August 1 to November 30, 2022. The transmitter was placed on the top of Monte Gomito (44.1277°lat, 10.6434°lon, 1892 m a.s.l.) and the receiver on the roof of the Department of Information Engineering of the University of Florence (43.7985°lat, 11.2528°lon, 50 m a.s.l.). The resulting radio link length was 61.15 km. Four ground weather stations of the regional weather service were selected among those available. In this paper, we describe the upgraded instrument and present the outcomes of the new measurement campaign, whose purpose was mainly to compare the IWV estimates provided by the instrument with the ground sensors measurements of air temperature, air humidity, barometric pressure, and rainfall.

The term ‘photocatalysis’ has recently gained high popularity, and various products using photocatalytic functions have been commercialized. Of all the materials that may be used as photocatalysts, TiO₂ is virtually the only one that is now and most likely will remain appropriate for industrial application. Water and air purification systems, sterilization, hydrogen evolution, self-cleaning surfaces, and photoelectrochemical conversion are just a few of the products and applications in the environmental and energy domains that make extensive use of TiO₂ photocatalysis. This is due to the fact that TiO₂ has the lowest cost, most stability, and most effective photoactivity. Furthermore, history attests to its safety for both people and the environment because it has been used as a white pigment since antiquity. This review discusses some important aspects and issues concerning different synthesis methods and their influence on the structure and properties of TiO₂, as well as the concept of photocatalysis based on it as a promising biocompatible functional material that has been widely used in recent years. The advantages of TiO₂ applications in various fields of science and technology are discussed, including environmental protection, photocatalysis including self-cleaning surfaces, water and air purification systems, hydrogen liberation, photovoltaic energy, cancer diagnosis and therapy, coatings and dental products, etc. Information on the structure and properties of TiO₂ phases, as well as modern methods of synthesis of functional materials based on them are presented. This is followed by a detailed review of the basic principles of TiO₂ photocatalysis with a brief introduction to the modern concept of TiO₂ photocatalysis. Finally, the challenges and prospects of TiO₂ photocatalysis for various applications are briefly discussed. Recent advances in the fundamental understanding of TiO₂ photocatalysis at the atomic-molecular level are highlighted, and important recent advances in TiO₂ photocatalysis are summarized in terms of the design and engineering of new materials.

The production and consumption of plastic bottled water have several negative environmental impacts worldwide. The EU countries have adopted strategies and programs to reduce single-use plastics, including PET bottles. A key aspect of designing effective policies is understanding consumer behaviour. To identify barriers and motivations for drinking tap and bottled water, we conducted a nationally representative questionnaire survey among 3,411 respondents in the Czech Republic in 2022. The results reveal that people aged 18-34 appear to be moderate consumers of bottled water and very frequent consumers of tap water. Bottled water consumption tends to be less frequent among people with higher education, while tap water consumption is less frequent among people with lower incomes. The most important factors that explain the frequency of drinking bottled and tap water are taste perception, health concerns and habit. Health concerns about tap water and the unpleasant taste of tap water influence higher consumption of bottled water and vice versa. People with a strong habit of drinking tap water are less likely to consume bottled water. The constructs from the Theory of Planned Behaviour were statistically significant. The results can guide decision-makers in promoting tap water to consumers. To encourage tap water drinking, we suggest measures to increase the availability of tap water in public places in conjunction with campaigns targeting taste and health perception and the habit of drinking tap water.

The present study investigates the impact of electrode surface roughness on the electrofreezing of water. This research focuses on how the electrode roughness induced by a laser treatment affects the nucleation and growth of ice crystals under controlled electric fields. To achieve this, a series of experiments were conducted using deionized water samples placed between electrodes with varying surface roughness. The electrodes, fabricated with the Al6061 T6 alloy were structured via the Laser Shock Processing (LSP) method. For this purpose, the pulsed densities during the LSP process were varied from 900 to 2500 pulses/cm2. The increase of the pulse density was correlated to the surface structuring and to the microstructural features and average roughness of the LSP-treated Al6061 alloy. A wavy-like microstructure was induced upon the LSP treatment with average roughnesses between ~ 3.5 and 6 µm at the selected pulse densities. The results indicate that electrode roughness significantly influences the electrofreezing process. Rougher electrodes were found to lower the nucleation temperature compared to smoother ones, suggesting enhanced ice nucleation activity. The findings are attributed to the increased electric field concentration at the asperities of the rough surfaces, which may facilitate the alignment of water molecules and the formation of critical ice nuclei.

While the beneficial effects of using magnetic and electromagnetic treatment (ET) of brackish and saline waters on soil salinity reduction in the root zone were widely reported more studies are needed to answer questions about the soil salt leaching efficiency and the effect of the duration of the exposure to ET. For this aim, pot experiments were conducted using an Aqua-4DR physical water treatment device. The first experiment included two trials. The first considered 5 concentrations: C0:1.0; C1:4.5; C2:9; C3:13.5; and C4:18 dSm-1. The results revealed that the volume and the salt concentrations of the drained waters were significantly higher under irrigation with ET saline waters than those provided by untreated waters. The drained fraction of water varied from 20 to 26% under irrigation with untreated water and increased from 33 to 56% under irrigation with electromagnetized water indicating an improvement of salt leaching. The second trial was carried out with different irrigation doses. The result showed that the higher the dose, the more obvious and significant ET effect. The different treatment durations of water exposure revealed that the volume and salinity of drained water significantly increase as the ET duration increases. An increase in ET duration induces also an increase in soil water content of around 2.5%. Based on the experimental findings, we may conclude that the ET of saline water can reduce the adverse effect of salinity on the top soil, but these leached salts are carried away in depth and there is no concentration limit of water to the effect of the ET.

The water exit problem, which is ubiquitous in ocean engineering, is one of the significant research topics in the interaction between navigators and water. The study of the water exit problem can help to improve the structure design for marine ships and underwater weapons for better strength and movement status. However, the water exit problem involves complex processes such as gas-liquid-solid three-phase coupling, cavitation, water separation, liquid surface deformation and fragmentation, making it challenging to study. According to the works carried out by many researchers towards this issue, we summarize the recent developments from three aspects, i.e. theoretical research, numerical simulation and experimental results. In theoretical research, the improved von Kaman model and linearized water exit model are introduced. Several classical experimental devices, data acquisition means and cavitation are introduced in experimental development. Three methods, namely, BEM(boundary element method), FVM(finite volume method) and LES(large eddy simulation) are concluded for numerical simulation. The limitations and shortcomings of these three aspects are then analyzed. Finally, an outlook on the future research improvements and developments of the water exit problem is provided.

This paper aimed to evaluate the growth, gas exchange and Chl a fluorescence in ipê-rosa seedlings, subjected to levels of 100, 75, 50 and 25% of water replacement (LWR), in a greenhouse. The morphometric variables of plant height, diameter at stem height, number of leaves and leaflets, root length and volume, plant dry mass and leaf area were evaluated. The potential evapotranspiration of seedlings (ETc) was obtained using direct weighing, considering as a reference the water replacement of 100% of the mass variation between subsequent days; the cultivation coefficients (kc) were obtained by the ratio between ETc and the reference evapotranspiration (ETo) obtained by the Penman-Montheit FAO-56 method. Biomass and evapotranspiration data were combined to determine water sensitivity. Diurnal fluxes of gas exchange (net photosynthesis rate, transpiration rate, stomatal conductance, internal and atmospheric carbon ratio, water use efficiency and leaf temperature) and Chl a fluorescence (Fv/Fm, ΦPSII, ETR, Fv’/Fm’, NPQ and qL) were evaluated. Water restriction caused reductions of 90.9 and 84.7% in the increase in height and diameter of seedlings subjected to 25% water replacement when compared to seedlings with 100% water replacement, while biomass accumulation reduced by 96.9%. The kc values increased throughout the seedling production cycle, ranging from 0.59 to 2.86. Maximum water sensitivity occurred at 50% water replacement, with Ky = 1.62. Maximum carbon assimilation rates occurred in the morning, ranging from 6.11 to 12.50 µmol m-2 s-1. Ipê-rosa seedlings regulate the physiology of growth, gas exchange, and Chl a fluorescence depending on the amount of water available, and only 25% of the water re-placement in the substrate allows the seedlings to survive.

Study assessed the wind potential of three sites in Chad: Koro Toro, Salal and Nedeley. Analysis of the Weibull distribution curves reveals marked seasonal variability in wind speed, concentrated around the mean. Three models of high-power wind turbines were analyzed. At Koro Toro, the Siemens Gamesa SG 14-222 DD has a capacity factor of between 0.52 and 0.682, allowing a daily flow of pumped water of between 1.4 and 6.1 million m³. The Enercon E-126 EP4 performs slightly less well. At Salal, the Siemens Gamesa has a capacity factor of between 0.4463 and 0.6605, with a water flow rate of between 0.9 and 3.7 million m³/day. The Vestas V164-10.0 MW has a higher capacity factor (0.6327 to 0.8115) but a lower water flow rate (0.5 to 1.9 million m³/day). Enercon's performance is comparable to that of Siemens Gamesa. The Nedeley study reveals favorable conditions, with seasonal variations in wind speed and capacity factor indicating good wind potential, and maximum daily water flows of between 3 and 6 million m³. Analysis of the wind roses shows interesting potential in these towns, with a dominant east-north-easterly wind at maximum frequencies of 40%. The absence of calm winds is promising, although Nedeley and Salal have a residual presence. This study shows that the sites offer good wind potential This, enabling the production of electricity and heat.

The study investigates the economic feasibility and farmer acceptance of utilizing treated wastewater (TWW) for agricultural irrigation, particularly in the Northern Jordan Valley. Despite its potential to mitigate water scarcity, concerns persist regarding its impact on soil health, crop yield, and land utilization, hindering widespread adoption. The research aims to measure farm profitability and farmers' willingness to embrace TWW through various blending scenarios with traditional surface water sources. The yield response function to salinity was incorporated into profit function to simulate crop profitability and water values. Results indicate that the introduction of TWW negatively affects salt-sensitive crops like citrus but positively impacts others such as date palm, olives, tomatoes, and peppers due to increased fertilizer content in irrigation water. Economic performance indicators reveal a gradual decrease in water net productivity for citrus with increasing blending ratios of TWW, with the water value decreasing accordingly. Higher percentages of treated water do not consistently lead to increased productivity, profitability, or net value added, emphasizing the need for careful consideration and understanding of economic risks associated with specific crops and water quality. To mitigate the impact of water salinity on citrus production, growers are advised to improve soil quality, periodically flush the soil with low-salinity water, and use salt-tolerant rootstocks. Regular monitoring of soil and water salinity levels is crucial for informed decision-making. While using TWW, water may offer cost savings.

Accurate assessment of shale gas reserves hinges on a detailed characterization of gas and water distribution within shale reservoirs. Despite its importance, the nanoscale behavior of water and methane in deep shale formations, especially under elevated temperatures and pressures, remains poorly understood. This study proposes a novel molecular modeling approach to represent the complex nanocomposite porous media found in deep shale matrices. Leveraging quantitative data from experimental analyses of shale pore composition, we developed a molecular model that accurately reflects the intricate pore-slit structure within a composite of kerogen and illite, common constituents of shale. Employing a hybrid grand canonical Monte Carlo and molecular dynamics simulation technique, we investigated the micro-scale distribution and preferential adsorption sites of water and methane within the shale matrix. Our research further elucidates the impact of water on the pore structure of shale and delineates the co-occurrence patterns of water and methane. The simulations reveal that water and methane share similar adsorption preferences on kerogen surfaces, while methane does not exhibit specific adsorption preferences on water-bearing illite. We also find that the presence of water significantly alters the illite pore space, leading to a reduction in larger pore volumes and a concomitant increase in smaller pores. The decrease in methane content with increasing water content is more pronounced in the shrinkage cracks compared to the kerogen matrix pores and is particularly notable in the macropores of illite. The findings underscore the differential sensitivity of methane content to water levels across various shale pore types. These insights contribute to a deeper theoretical understanding of gas and water distribution mechanisms in deep shale reservoirs, offering valuable support for the evaluation of deep shale gas resource potential.

The isotopic and nuclear techniques discussed, namely: Fallout Radionuclide, Fingerprint, and Isotope Hydrology, are linked to the evaluation of soil and water degradation processes. A traditional literature review was conducted to gain the most comprehensive understanding of both the current state of the art and the subject matter, with the aim of proposing a hypothesis that integrates the synergistic convergence of these techniques in order to offer results that are more reliable. A case study is presented as a synthesis of the preceding discussion.

The Colorado and Mississippi River Basins are crucial for water supply, agriculture, and ecological stability in the U.S., yet climate change, water management practices, and energy sector demands pose significant challenges to their sustainability. This paper highlights the potential of leveraging the Voluntary Carbon Market (VCM) to address these challenges by creating new revenue streams and incentivizing sustainable water management practices. The paper provides high-level estimates by extrapolating from existing literature. The results suggests that water projects in these basins could generate over 45 million carbon credits annually, potentially attracting around $4.5 billion in investments over the next decade. However, challenges such as high costs, complex regulations, and stakeholder coordination must be addressed. The paper also identifies opportunities for advancing water resiliency projects, including increasing public awareness, engaging corporations, and utilizing innovative financing mechanisms. Recommendations include promoting the VCM-water relationship, encouraging methodology innovation, developing pilot programs, investing in digital monitoring technologies, and conducting localized analysis to optimize carbon credit potential in water management. By integrating carbon markets with water management strategies, the paper suggests significant contributions to global climate goals and enhanced water resilience in these critical regions.

Over the coming decades, global freshwater withdrawals are expected to grow, especially in low and middle-income countries. Unless there are significant improvements in the efficiency of water use by economies, freshwater stress, crises and scarcity will worsen. This paper explores further the economic relationship between water use efficiency and scarcity. Because growing scarcity of freshwater in many regions and countries is not adequately reflected in markets, there is often insufficient incentives for investment and innovation to improve the efficiency of water use. To explore further changes in water use efficiency across countries, we conduct a panel analysis of water productivity changes for 130 countries over 1995 to 2020. Countries with lower initial levels of water use efficiency tended to have higher water productivity growth, whereas more agriculturally dependent economies displayed lower improvements in water use efficiency. Better institutional quality and capacity for innovation may also increase water use efficiency. We discuss the implications of these results for improving water use productivity in economies, and in particular, the opportunities and challenges for improving water markets and trades to alleviate water scarcity. We conclude by identifying further areas of research.

It is vital to analyze ship collision risk for preventing collisions and improving safety at sea. This paper takes Ningbo-Zhoushan Port, a typical complex navigable water, as the research object, propose a probabilistic conflict detection method to estimate the potential collision risk by using a dynamic domain model driven by AIS data. Combined with the algorithm of fast modularity optimization and spectral clustering, a ship group extraction method from the perspective of water navigation management was proposed. Aiming at ship traffic characteristics in complex navigable waters, conduct dynamic calculation of ship collision risk from individual, regional and local multi-scale perspectives. The results show that the proposed method can detect the collision risk in a timely, reliable and effective manner under complex dynamic conditions. As such, they provide valuable insights for ship collision risk prediction and the development of risk mitigation measures.

Regulations and guidelines on water quality are used according to physicochemical but scarcely biological variables to protect ecosystems and control water use. This study innovates using in-sects as bioindicators to establish the health status of an aquatic ecosystem in the Latin American's lentic bodies. Water quality in urban lentic bodies in the Metropolitan Region, Chile, was evaluated from of aquatic insect assemblages and physicochemical variables for conserving aquatic life. Evaluations were carried out in parallel in four sampling stations in three water bodies, two seasons, and 2–3-year series, with three replicates. Aquatic insects were randomly sampled and identified by families; abundance, and richness differences were compared with non-parametric tests. Family Biotic Indices (FBI) were calculated. Physicochemical variables were measured using portable multiparametric and laboratory chemical analysis to determine water quality. A new physicochemical variable (total suspended solids) was established, which had a greater incidence with the results obtained for the FBI. Based on the nitrogen and phosphorus levels in the water bodies, all of them were eutrophics. Given the ecosystem diversity and complexity, studies should delve deeper into wetlands to establish methods that contribute to determining water quality, using insects as bioindicators and physicochemical variables.

The drinking water temperature is expected to increase in the Netherlands due to climate change and the installation of district heating networks as part of the energy transition. To determine effective measures to prevent undesirable temperature increase of the drinking water a model is developed. This model describes the temperature in the drinking water distribution network as a result of the transfer of heat from the climate, above and underground heat sources through the soil. The model consists of two coupled applications. The extended soil temperature model (STM+) describes the soil temperatures, in a two-dimensional finite element method that includes a drinking water pipe and two hot water pipes, coupled to a micro meteorology model. The extended water temperature model (WTM+) describes the drinking water temperature as a function of the surrounding soil temperature (the boundary temperature, resulting from the STM+), thermal sphere of influence where the drinking water temperature influences the soil temperature, and the hydraulics in the drinking water network. Both models are validated with field measurements. This paper describes the WTM+. Previous models did not consider the cooling effect of the drinking water on the surrounding soil, which led to an overestimation of the boundary temperature, and to an overestimation of how quickly the drinking water temperature reaches this boundary temperature. The field measurements show the improved accuracy of the WTM+ when considering one to two times the radius of the drinking water pipe as the thermal sphere of influence around the pipe.

At 8000 m and above, a ‘death zone’ reputation afforded protection for the fragile ecosystems of the Himalaya and Korakoram ranges for thousands of years. After decades of high-altitude mountaineering, environmental impacts have been documented such as associated carbon-intensive air travel and contamination from waste. Despite the growing popularity, high-risk and fragile context of the sport, the behaviour, perspectives and experiences of high-altitude mountaineers, and the social and economic consequences have not been researched. Following an interpretive paradigm and using purposive sampling, this qualitative study conducted in-depth interviews and open-ended survey questions to collect the experiences of sixteen high-altitude mountaineers. Analysis of the qualitative data was informed by Grounded Theory with the coding process leading to the overarching category of ‘leave no trace’. The results show how the high risks to life, and growing popularity of the activity influence mountaineer’s ability to act sustainably and increase unsustainable behaviour despite a desire to ‘leave no trace’ on the mountain. Meanwhile, climate change has already and will increasingly have profound impacts on the risks associated with 8000m mountaineering. Allowing more time for acclimation would help to address the root causes of unsustainable behaviours along with better enforcement of regulations.

This paper investigates the effects that rain drop erosion has on the integrity of wind turbine materials. This research involves analysis of impact models and theoretical equations to simulate the impact phenomena when a raindrop collides with a wind turbine blade at high speed. Impact phenomena that occur when a raindrop impacts with a wind turbine blade were evaluated. Additionally, the use of various types of software was considered to simulate this impact event. The model results of the raindrop impact with respect to a comparison of the governing equations and impact behaviour are addressed. Future work is outlined including adding variables to the erosion modelling algorithms.

This study primarily investigates the effect of fly ash (FA) content on the mechanical properties and hydration performance of alkali-activated ground granulated blast furnace slag cements (AAGC), and compares the related properties with ordinary Portland cement (OPC). Additionally, the study examined the hydration products, thermal analysis, MIP, SEM, chemically bound water, and pH values of AAGC. The compressive strength of AAGC showed a retrogression phenomenon from 3 to 28 days, with the 14-day and 28-day compressive strengths of AAGC being higher than those of OPC. The AAGC with 20% FA content exhibits the highest 28-day compressive strength (75 MPa). The hydration heat release rate curved of OPC and AAGC can be divided into the initial induction period, induction period, acceleration period, deceleration period and steady period. As FA content increases, the 28-day pore volume of AAGC increased while pH values and chemically bound water decrease. SEM images of AAGC with low FA content showed more microcracks.

Cold-water coral (CWC) reefs represent vulnerable marine ecosystems (VMEs) of critical ecological importance. This study presents a novel approach for the automated detection and segmentation of key CWC species, Desmophyllum pertusum and Madrepora oculata, in underwater imagery using the YOLOv8l-seg deep learning model. The model was applied to images collected at two Natura 2000 sites in the Cantabrian Sea: the Avilés Canyon System (ACS) and El Cachucho Seamount (CSM). Results demonstrate the model's high accuracy in identifying and delineating individual coral colonies. Significant variability in coral cover was observed between and within the study areas, highlighting the patchy nature of CWC habitats. Three distinct coral community groups were identified based on percentage coverage composition and abundance, with the highest coral cover group being located exclusively in the La Gaviera canyon head within the ACS. This research demonstrated the potential of deep learning models for efficient and accurate monitoring of VMEs, facilitating the acquisition of high-resolution data essential for understanding CWC distribution, abundance, and community structure, and contributing to the development of effective conservation strategies.

Tsunami is a type of infrequent geohazards with devastating consequences, which makes accurate computer simulations of tsunami waves particularly desirable for hazard assessment and mitigation purposes. The evolution of a typical tsunami involves the generation, propagation and inundation phases. In this survey, we briefly describe the most common types of tsunamigenic sources and give a detailed review of some most widely used mathematical models for describing tsunami propagation. We emphasize the approximations adopted in each mathematical model and point out their most important advantages and disadvantages. Tsunami propagation modeling is computationally demanding, involving a wide span of spatial and temporal scales. While some of the approximate models are sufficiently accurate for describing wave behaviors at certain scales, they might not be applicable at other scales. Effective and efficient tsunami propagation simulations will likely depend upon the proper coupling of different models for different scales.

As waterflooding multi-layer reservoirs get into the high-water-cut stage, inter-layer conflicts become increasingly serious, leading to a worsening development effect over time. Production layers regroup is an effective approach for resolving inter-layer conflicts and improving waterflooding efficiency. At the current stage, there are limitations for most of the methods of production layers regroup. This article proposes a smart method for optimizing the layer regroup plan based on genetic algorithm. Comprehensively considering various factors that affect the regroup of layers, based on the combination principle of "smaller intra-group variance and larger inter-group variance of each influencing factor are expected ", genetic algorithm is used to calculate the fitness value of the initial combination schemes, the advantageous schemes with higher fitness values are selected as the basis of the next generation. Then crossover and mutation operations are performed to those advantageous schemes to generate new schemes. Through continuous selection and evolution, until the global optimal solution with the highest fitness value is found, the optimal combination scheme is determined. Comparative analysis with numerical simulation results demonstrates the reliability of this intelligent method, with an increased oil recovery of 4.34% for the sample reservoir. Unlike selecting a preferable plan from a limited number of predefined combination schemes, this method is an automatic optimization to solve the optimal solution of the problem. It improves both efficiency and accuracy as compared to conventional reservoir engineering methods, numerical simulation methods and most of the mathematical methods, thus could provide effective guidance for EOR strategies of waterflooding reservoirs in high-water-cut stage.

Solar saline water splitting is a promising approach for sustainable hydrogen production, harnessing abundant solar energy and the availability of brine resources, especially in the Atacama Desert. Bischofite (MgCl2·6H2O), a naturally occurring salt, has garnered significant attention due to its wide range of industrial applications and the challenges associated with efficient hydrogen production in arid or hyper arid locations. This work discloses the electrochemical performance of Mn2O3 electrodes using a superposition model based on mixed potential theory and evaluates the superficial performance of this electrode in contact with a 0.5 M nature Bischofite salt solution focusing on hydrogen evolution reaction (HER), and oxygen reduction reaction (ORR), that occurs during saline water splitting. The application of the non-linear superposition model provides valuable electrochemical kinetic parameters that complement the understanding of Mn2O3, this being one of the novelties of the manuscript.

Plug and abandonment (P&amp;A) operations demand valuable time and resources with operational procedures and materials to establish the well barrier element. This study proposes the use of a water-based fluid as a liquid well barrier element for temporary abandonment, based on esti-mates of its lifespan and survival probability on downhole conditions acquired through acceler-ated life tests. For that, the water-based formulation was tested and exposed to 95, 110, 140 and 150°C, for time intervals ranging from 1 to 10 days. After temperature exposure, the fluid prop-erties were verified and failure was detected by accounting for any deterioration in rheological parameters and/or a substantial increase in filtrate volume. Statistical analysis of failure data was performed in R software using Weibull Model, and fluid average lifespan and survival probability were estimated for P&amp;A temperatures. The results obtained demonstrates that the degradation of the fluid only was observed for 140 and 150°C and is mostly related to the CMC deterioration. The reliability metrics shows that until 80°C the fluid is a promising alternative for temporary abandonment, with no need of monitoring. For higher downhole temperatures, theses metrics should be considered to define the maximum time of operation and requirements for monitoring management in the operation design.

Stormwater runoff from large roads is a major source of pollutants to receiving waters. Porous pavements have been shown to substantially reduce many of these pollutants, but studies are lacking on arterial roads. We sampled typical stormwater pollutants in runoff from sections of an arterial road 9-16 years after installation of three pavement types: control with conventional asphalt, porous asphalt overly, and full-depth porous asphalt. Both types of porous pavements substantially reduced most of the stormwater pollutants measured. Total suspended solids, turbidity, total lead, total copper, and 6PPD-quinone were all reduced by &gt;75%. Total nitrogen, ammonia, total phosphorus, biochemical oxygen demand, total and dissolved copper, total mercury, total zinc, total polycyclic aromatic hydrocarbons, and di-2-ethylhexyl phthalate were all reduced by &gt;50%. Reductions were lower or absent for nitrate, orthophosphate, E. coli, dissolved lead, and dissolved zinc. Most reductions were statistically significant. Many pollutants exceeded applicable water quality standards in the control samples but met them with both types of porous pavement. This study demonstrates that porous overlays and full-depth porous asphalt can provide substantial reductions of several priority stormwater pollutants on arterial roads for many years after installation.

This paper introduces LUNARMINERS framework and applies it for lunar water-ice extraction in Shackleton Crater at the lunar South Pole. The LUNARMINERS combines artificial intelligence swarm robotics with biomimetic swarm behavior. In the proposed framework, the foraging behavior of ants, the light attraction behavior of fireflies, and the migratory flight strategy of wild geese have been comprehensively analyzed and applied to robotic swarms for lunar mining. This research takes into consideration important aspects of the lunar environment, such as permanently shadowed regions (PSRs) and communication limitations in lunar craters, by simulating them in Robot Operating System (ROS). The LUNARMINERS framework has advantages over other methods in that it allows for the survey of an area of 0.025 km2 per day while achieving 100% water-ice deposition effectiveness. Studies show that by applying the LUNARMINER framework, the exploration of the entire Shackleton Crater can be completed in 3.75 Earth years via 15 robots. Simulations of the implementation of the proposed LUNARMINERS framework have demonstrated reliable high-levels of extraction efficiency, with the framework producing 12.9 metric tons of water-ice per day, which potentially can support up to 1,990 people per day based on astronaut’s daily water requirements from NASA's Human Integrated Design Handbook (HIDH) and thus, establishing a sustainable benchmark for lunar habitation. The results from this study show that the advances in the proposed LUNARMINERS framework can contribute to future lunar exploration and ISRU, setting new standards for sustainable off-Earth mining.

This article reviews all the major stages in the origins of life. From the emergence of matter in the initial Big Bang to the modern, civilized human being. On an immaterial level, it is proposed and explained how consciousness necessarily takes precedence over matter. Next, we explain how consciousness, with its ability to process information, selected the water molecule to breathe life into the periodic table of elements. We also explain why the notion of entropy allows us to evolve: "Die Entropie der Welt strebt einem Maximum zu" (second principle) and, therefore, takes precedence over the notion of energy, which, on the contrary, encourages us to preserve what we have: "Die Energie der Welt bleibt konstant" (first principle). This is followed by a discussion of the importance of quantum coherence and the need to rely on a second quantization formalism for a proper understanding of the physical-biochemical properties of water. Moreover, throughout the argument developed on the best and most fundamental things science has to offer, care is taken to link this knowledge to the great philosophies of the West (Greece), the East (China, India) or even to practices of a shamanic nature (Africa, America). Hence, finally, the proposal to reconsider all musical practice within the framework of the diapason of water at a frequency of 429.62 Hz, as well as all therapeutic practice on the basis of seven clearly identified and established frameworks of thought.

Durum wheat (DW) is one of the major crops grown in the Mediterranean area, a climate-vulnerable region where the increase in day/night (d/n) temperature are severely threatening DW yield stability. In order to improve DW heat tolerance, the introgression of chromosomal segments derived from the wild gene pool is a promising strategy. Here, four DW-Thinopyrum spp. near-isogenic recombinant lines (NIRLs) were assessed for their physiological response and productive performance after an intense heat stress (IH, 37/27°C d/n) applied for 3 days at anthesis. The NIRLs included two primary types (R5, R112), carriers (+) of a differently sized Th. ponticum 7el1L segment on DW 7AL arm, and two corresponding secondary types (R69-9/R5, R69-9/R112), possessing a Th. elongatum 7EL segment distally inserted into the 7el1L ones. Their response to the IH stress was compared to that of corresponding non-carrier sib lines (−) and of the heat tolerant cv. Margherita. Overall, the R112+, R69-9/R5+ and R69-9/R112+ NIRLs exhibited a tolerant behaviour towards the applied stress, standing out for maintenance of leaf relative water content, but also for accumulation of proline and soluble sugars in flag leaf and for preservation of photosynthetic efficiency. As a result, all the above three NIRLs (R112+ > R69-9/R5+ > R69-9/R112+) displayed good yield stability under the IH, also in comparison with cv. Margherita, R112+ particularly relying on strength of spike fertility/grain number traits, R69-9/R5+ on efficient compensation by grain weight increase. This work largely confirmed and further substantiated the value of exploiting the wild germplasm of Thinopyrum species as useful source for the improvement of DW tolerance to even extreme abiotic stress conditions, such as the severe heat treatment throughout day- and night-time applied here.

The use of green hydrogen as a high-energy fuel of the future may be an opportunity to balance the unstable energy system, which still remains renewable energy sources. This work is a comprehensive review of recent advancements in green hydrogen production. The review outlines the current energy consumption trends. It presents the tasks and challenges of the Hydrogen Economy towards green hydrogen, including production, purification, transmission, storage, and conversion into electricity. This work discusses the main types of water electrolyzers: alkaline electrolyzers, proton exchange membrane electrolyzers, solid oxide electrolyzers, and anion exchange membrane electrolyzers. Despite the higher production costs of green hydrogen compared to grey hydrogen, the review suggests that as renewable energy technologies become cheaper and more efficient, the cost of green hydrogen is expected to decrease. The review highlights the need for cost-effective and efficient electrode materials for large-scale applications. It concludes by comparing the operating parameters and cost considerations of the different electrolyzer technologies. It sets targets for 2050 to improve the efficiency, durability, and scalability of electrolyzers. The review underscores the importance of ongoing research and development to address the limitations of current electrolyzer technology and to make green hydrogen production more competitive with fossil fuels.

Sour waters are one of the main aqueous byproducts generated during petroleum refining and require processing in Sour Water Treatment Units (SWTUs) to remove contaminants such as H₂S and NH₃ in compliance with environmental legislations. Therefore, monitoring the composition of SWTU effluents, including acid gas, ammoniacal gas, and treated water, is essential. This study aims to present an AI (artificial intelligence) hybrid-based methodology to develop soft sensors capable of real-time prediction of H₂S and NH₃ mass fractions in the effluents of SWTUs and validate them using real data from industrial units. Initially, a new database based on the dynamic simulation of a two stripping columns SWTU phenomenological model, developed in Aspen Plus Dynamics® V10, was generated, aiming at non-faulty runs, unlike our previous work [1]. Ensemble methods (Decision Trees), such as Gradient Boosting and Random Forest, and Support Vector Machines were compared for soft sensor creation using these simulated data. The best outcome was the development of six soft sensors based on Random Forest with R² greater than 0.87, MAE less than 0.12, MSE less than 0.17, and RMSE less than 0.41. Variable importance analysis revealed that the temperature of the second stage of Column 1 significantly influences the thermodynamic equilibrium of H₂S and NH₃ separation from sour waters, being critical for five of the six soft sensors. After this initial stage using data from the phenomenological model, data from an industrial-scale SWTU were used to develop real soft sensors. The results proved the effectiveness of the conjugated use of physical model and industrial data approach in the development of soft sensor for two-column SWTUs.

There is a growing need to implement modern technologies, such as digital twinning, to improve the efficiency of transport fleet maintenance processes and maintain the company's operational capacity at the required level. Therefore, the paper reviews the existing literature to present an up-to-date and content-relevant analysis in this field. The proposed methodology is a systematic literature review using the Primo multi-search tool following Preferred Reporting Items for Systematic Reviews and Meta-Analyzes (PRISMA) guidelines. The main inclusion criteria included the publication dates (studies published from 2012–2024) and studies published in English. This resulted in the selection of 201 of the most relevant papers in the area of investigation. Finally, selected articles in this review were categorized into seven groups: a) air transportation, b) railway transportation, c) land transportation (road), d) in-house logistics, e) water and intermodal transportation, f) supply chain operation, and g) other applications. One of the main advantages of the study is that the results are obtained from different scientific sources/databases thanks to using the multi-search tool. Moreover, a bibliometric analysis of the selected papers was performed. The results have led the authors to specify the main research problems and trends related to the analyzed area and to identify the main research gaps for future investigation from academic and engineering perspectives. In addition, based on the review results, a framework for DT in transportation system maintenance was developed. The study ends with conclusions and future research directions.

The environmental vulnerability diagnosis of a river basin depends on a holistic analysis of its environmental aspects and degradation factors. Based on this diagnosis, the definition of priority areas where interventions for environmental recovery should be carried out is fundamental, since financial and natural resources are limited. In this study, we developed a methodology to assess these fragilities using an Environmental Vulnerability Index (EVI) that combines physical and environmental indicators related to the natural sensitivity of ecosystems and their exposure to anthropogenic factors. The EVI developed was applied to the headwater’s region of the São Francisco River basin, Brazil. The proposed index was based on the AHP multi-criteria analysis and was adapted to include four variables representative of the study area: Land Use Adequacy, Burned Area, Erosion Susceptibility and Quantitative Water Balance. The EVI analysis highlighted that the presence of easily erodible soils, associated with sloping areas and land uses above their capacity, generate the most vulnerable areas in the headwaters of the São Francisco River basin. The results of this study indicate where resources should be applied for environmental preservation in the basin under study, directing the allocation of efforts to areas with lower resilience in maintaining ecosystem services.

Many studies have demonstrated hydrogen's therapeutic and preventive effects on various diseases. Its selective antioxidant properties against hydroxyl radicals, which are responsible for the indirect effects of ionizing radiation, may make it worthy of attention as a new radio-protector. We recently developed new hydrogen water that is more stable and has higher antioxidant activity by using ultra-fine bubbles. In this study, female C57BL/6J mice given ad libitum access to ultra-fine bubble hydrogen water (UBHW) were subjected to whole-body irradiation (WBI) with X-rays, and the radio-protective effect of UBHW was evaluated. Sub-lethal WBI resulted in a 30-day survival rate of 100% in UBHW-fed mice, compared with 37% in control mice. In the case of lethal WBI, while the control mice died out in about 3 weeks, the 30-day survival rate improved to 40% by UBHW due to the high scavenging activity of hydroxy radicals. Twenty-six serum proteins involved in inflammatory and immune responses were significantly identified in UBHW-fed mice by proteomics, and UBHW may enhance and regulate these functions, resulting in reduced damage in mice exposed to WBI. We conclude that UBHW has good potential in radio-protection, with evidence that warrants further research efforts in this field.

In this very personal hunt for the meaning of the bacterial cell cycle, the snark, I briefly revisit and update some of the mechanisms we and many others have proposed to regulate the bacterial cell cycle. These mechanisms, which include the dynamics of calcium, membranes, hyperstructures and networks, are based on physical and physico-chemical concepts such as ion condensation, phase transition, crowding, liquid crystal immiscibility, collective vibrational modes, reptation, and water availability. I draw on ideas from subjects such as the ‘prebiotic ecology’ and phenotypic diversity to help with the hunt. Given the fundamental nature of the snark, I would expect that its capture would make sense of other parts of biology. The route therefore followed by the hunt has involved trying to answer questions like “why do cells replicate their DNA?”, “why is DNA replication semi-conservative?”, “why is DNA a double helix?”, “why do cells divide?”, “is cell division a spandrel?” and “how are catabolism and anabolism balanced?”. Here, I propose some relatively unexplored, experimental approaches to testing snark-related hypotheses and, finally, I propose some possibly original ideas about DNA packing, about phase separations, and about computing with populations of virtual bacteria.

The flooding phenomenon in Pekanbaru City is an interrelated problem between socio-economic and environmental problems. Changes or conversion of land from non-built areas to residential areas or other uses result in the area of water catchment areas being reduced. Another no less important factor is socio-economic factors. One of the socio-economic problems that causes flooding every year in Pekanbaru City is waste management. Garbage thrown carelessly by Pekanbaru people obstructs drainage channels and river flows and causes flooding. Another socio-economic problem is water use behavior. The majority of water used for daily needs, bathing and washing toilets comes from groundwater. The use of groundwater in large and continuous quantities results in land subsidence and contributes to an increase in flood inundation. Analysis of spatial planning strategies and community behavior towards flood control efforts using Participatory Prospective Analysis (PPA). Prospective analysis in this study was used to determine the dominant variables that influence strategy determination. This method is a tool designed to find out or investigate and anticipate changes with the participation of experts or stakeholders. The prospective method is a tool used for policy analysis, especially in research involving sustainable development, because it can facilitate the anticipation of change in an unstable environment. The results of the research show that spatial planning strategies and community behavior in flood control are carried out with the coordination of technical stakeholders related to flood control, flood management includes before a disaster occurs, during a disaster and after a disaster, flood plain management, includes determining flood boundaries, determining zoning, supervision and monitoring as well as community involvement.

The growing prevalence of disposable toilet seat covers in public restrooms stems from concerns about personal hygiene, given the direct contact between the seat and various users' skin. To enable flushing these disposable cover sheets down the toilet instead of discarding them in the trash, they must possess specific properties. These include rapid water absorption for quick disintegration, strength to endure user movement or moisture on the toilet seat surface, and a comfortable texture. To address these challenges, the study investigated the disintegration characteristics of flushable cover sheets prepared under different refining conditions. Alkyl ketene dimer (AKD) was also employed to enhance water resistance, while an organic antibacterial agent was used to impart antimicrobial properties. The findings revealed that adding 0.2% AKD and 1% organic antibacterial agent to pulp stock with a freeness of about 650 mL CSF was suitable for manufacturing disposable cover sheets with disintegration characteristics like toilet tissue paper.

Access to reliable water supply is critical for sustainable development and public health, yet many peri-urban and rural communities in the developing world face challenges such as poor maintenance, faulty infrastructure, and inadequate governance of water services, hindering the UN’s Sustainable Development Goals (SDG). In Emina-Boadi, a small town in Kumasi, Ghana, residents increasingly rely on boreholes due to substandard service from the Ghana Water Company Limited (GWCL). This shift highlights concerns about water reliability, quality, and affordability, impacting public health and hindering progress toward SDG 6. This case study assesses water service levels using key performance indicators (KPIs) such as quantity, quality, affordability, accessibility, and reliability, focusing on sources like boreholes, hand pumps, piped water, hand-dug wells, rainwater, and surface waters. The study aims to delineate the roles of different water providers, understand community dynamics, and evaluate contributions to rural development and SDG 6 through stakeholder interviews and questionnaires. Leveraging the WASHCost framework, which aims to improve planning methods and provision of water and sanitation services by addressing the lack of cost information in rural and peri-urban areas, and the Joint Monitoring Programme (JMP) framework, which monitors progress toward global targets related to water, sanitation, and hygiene, the study categorizes indicators and draws connections among them. Findings reveal a significant preference for borehole services, with 87% usage and an 83% reliability rate compared to 13% for GWCL. Daily water consumption averages 60.75 liters per person, with on-premises access improving water collection efficiency to 7 minutes. Dissatisfaction with GWCL services highlights the need for improved delivery aligned with community needs and SDG targets. Adopting sustainable management practices, enhancing infrastructure, and improving governance are crucial for ensuring safe and affordable water access for all residents of Emina-Boadi and similar communities.

Cellulose in the nano regime, defined as nanocellulose, has been intensively used for water treatment. Nanocellulose can be produced in various forms including colloidal, water-re-dispersible powders, films, membranes, nano papers, hydrogels/aerogels, and three-dimensional (3D) objects. They were reported for the removal of water contaminants e.g., heavy metals, dyes, drugs, pesticides, pharmaceuticals, microbial cells, and other pollutants from water systems. This review summarized the recent technologies for water treatment using nanocellulose-based materials. A scientometric analysis of the topic was also included. Cellulose-based materials enable the removal of water contaminants, and salts offer advanced technologies for water desalination. They are widely used as substrates, adsorbents, and catalysts. They were applied for pollutant removal via several methods such as adsorption, filtration, disinfection, coagulation/flocculation, chemical precipitation, sedimentation, Reverse Osmosis (RO), ultrafiltration (UF), nanofiltration (NF), electrofiltration (Electrodialysis), ion-exchange, chelation, catalysis, and photocatalysis. Processing cellulose into commercial products enables the wide use of nanocellulose-based materials as adsorbents and catalysts.

Ca2+ can boost protein-protein interactions and, if present at an appropriate level, can potentially improve the physicochemical properties of protein gels and films. This study aimed to determine the effect of CaCl2 (0, 0.01 0.025 0.05% w/w) on the optical, water affinity, and mechanical char-acteristics of glycerol (Gly)- and sorbitol (Sor)-plasticized pea protein isolate (PPI) films. The CaCl2 caused darkening and a color shift of the films from yellow to yellow-green. Additionally, de-creased light transmission, particularly in the UV range, and reduced moisture content were observed. The CaCl2 decreased the water vapor permeability (WVP) of the Gly-plasticized film by an average of 20%, with no effect on the Sor-plasticized film. All films were completely soluble in water. The CaCl2 negatively impacted the mechanical integrity of the films, reducing the tensile strength of the Gly- and Sor-plasticized films by ~16% and 14-37%, respectively. Further increases in CaCl2 content (0.1% and 0.2% w/w) led to concentration-dependent cracks, suggesting protein over-crosslinking. In summary, the incorporation of CaCl2 into PPI films did not provide signif-icant benefits and actually worsened key properties such as transparency and mechanical strength. The type of plasticizer influenced how CaCl2 affected some properties of the PPI film.

Background: This study provides a comprehensive analysis of Acinetobacter baumannii in aquatic environments and fish microbiota by integrating culture-dependent methods, 16S metagenomics, and antibiotic resistance profiling. Methods: A total of 83 A. baumannii isolates were recovered using culture-dependent methods from intra-hospital infections (IHI), wastewater (WW) and surface water (SW) samples from two southern Romanian cities in august 2022. The antibiotic susceptibility was screened using disc diffusion, microdilution, PCR and Whole Genome Sequencing assays. Results: The highest microbial load in the analyzed samples was found in Glina, Bucharest for both WW and SW samples across all investigated phenotypes. For Bucharest isolates, the resistance levels corresponded to fluoroquinolones &gt; aminoglycosides &gt; β-lactam antibiotics. In contrast, A. baumannii from upstream SW samples in Targoviste showed the highest resistance to aminoglycosides. The blaOXA-23 gene was frequently detected in IHI, WW, and SW isolates in Bucharest but was absent in Targoviste. Molecular phylogeny revealed presence of ST10 in Târgoviște isolates and ST2 in Bucharest isolates, while other minor STs were not specifically correlated with a sampling point. Using 16S rRNA sequencing, significant differences in microbial populations between the two locations was identified. The low abundance of Alphaproteobacteria and Actinobacteria in both locations suggests environmental pressures or contamination events. Conclusions: These findings indicate significant fecal contamination and potential public health risks, emphasizing the need for improved water quality monitoring and management.

Shrimp is the most important aquaculture industry. Therefore, we determined the effect of nitrifying-probiotic bacteria on water quality, growth, survival, immune response and intestinal microbiota of Litopenaeus vannamei cultured without water exchange. In vitro, only B. licheniformis used TAN, nitrites and nitrates since nitrogen bubbles were produced. TAN decreased significantly in the treatments with bacilli and LAB, but no differences were observed in nitrites. Nitrates were significantly higher in the treatments with bacteria. The final weight and survival of shrimp in the bacterial treatments increased significantly and superoxide anion increased significantly only in LAB treatment. The activity of phenoloxidase decreased significantly in the treatment with LAB and with the mixture of bacilli and LAB. Shrimp treated with bacilli in the water showed lower species richness. The gut bacterial community after treatments was significantly different from that of the control. Linoleic acid metabolism was positively correlated with final weight and superoxide anion, whereas quorum sensing was correlated with survival. Thus, bacilli and LAB in the water of hyperintensive culture systems act as nitrifers, modulate the intestinal microbiota and immune response, and improve the growth and survival of shrimp. This is the first report on Pediococcus pentosaceus and Leuconostoc mesenteroides as nitrifying bacteria.

The textile processing sector is accountable for the extensive utilisation and pollution of freshwater resources. Due to heightened consumer awareness of environmental legislation regarding freshwater contamination, the textile sector is compelled to review and improve their current water consumption practices. Foan dyeing technique is a highly promising alternative that has the ability to contribute to a more sustainable future. This review paper discussed the current state of foam dyeing technology, highlighting its advantages in terms of re-duced consumption of water and energy, as well as minimal usage of dyes and chemicals compared to conventional methods. The foam configuration allows for more effective application of dyes. As a result, there is a decrease in dye consumption and a reduction in processing time. The process is environmen-tally sustainable since it significantly reduces water pollution. Furthermore, foam dyeing method consumes less energy due to its lower dying temperature need compared to conventional processing technology. Additionally, this paper highlights the continued investigation of foam dyeing on many types of textile substrates (such as fibres, yarns, and fabric) and compositions including cotton, polyester, and their mixtures. In addition, the techno-economic comparison of foam dyeing and conventional dyeing is also given. This review paper addi-tionally endorses the Sustainable Development Goals (SDG 6, clean water and sanitation) by examining the preservation of usable water and the decrease in wastewater discharge through foam dyeing technology. Lastly, the potential advantages of foam dyeing in terms of significantly reducing water consump-tion and the generation of waste in the textile industry were also addressed.

The backwater lowland habitats of large rivers, like the Mississippi River in North America, present complex often inaccessible environments for traditional capture-based fish biodiversity sampling. Our knowledge of the assemblages of fishes that occupy such habitats are often incomplete, and this can compromise management efforts. We employed environmental DNA (eDNA) metabarcoding methods to sample a Mississippi River bottom wetland system to assess ichthyofaunal diversity, and assemblage structure across habitat types, and we compared our results to capture-based survey records for the same habitats. We collected water samples in spring and fall of 2022 from slough, ditch, shallow lake and bayou habitats that varied in depth, vegetation, seasonal variability, and connectivity to the Mississippi River channel. We detected a diverse array of fish species that included 51 taxa. Nearly all species previously documented in the habitats were detected by eDNA metabarcoding, and we increased the number of documented species by more than a third. Most of the species were ubiquitous across the range of habitats, but there was also substantial assemblage structure, with some species exhibiting clear habitat specificity. Fall sampling was limited to the deeper bayou habitats where seasonal variation between spring and fall was minimal. eDNA metabarcode sampling was demonstrated to be effective at detecting invasive species as well as uncommon species, which included several species of conservation concern.

The study reveals correlations between the parameters of ions and their HOMO and LUMO orbital energy level values. In particular, it demonstrates a clear correlation for the ion adsorption parameters on model electrodes: the aluminum oxide (0001) surface, graphene and Au (111) surface. Correlations are also observed for the parameters of ion binding to water and dimethyl carbonate molecules, which are often used as solvents. In addition, the dipole moment, polarizability and solvation energy of ions are well correlated with the values of the molecular orbital energies, and for anions a dependence on the oxidation potential is observed. The obtained descriptors make it possible to select ions with desired values for a specific problem. As an illustrative example, in this work we consider the problem of displacement of water molecules from the inner electric double layer by ions, which is one of the factors increasing the potential window in electrolytes of aqueous batteries. This approach can be applied in the rapidly developing field of aqueous electrolytes for battery or supercapacitor design, catalysis control through surface composition variations, as well as in studies of heavy metal ion binding to sorption materials.

Fluoride (iF) is important inorganic pollutant in groundwater in central México. The aim of this study was estimated environmental risk exposure of iF in residents of Jerez Zacatecas México. Fifty-five tap water samples were collected from households to determine iF concentrations using the ion-selective electrode method. Based on these environmental values, the Hazard Quotient (HQ) was estimated following the methodology of the Pan American Health Organization (PAHO). Subsequently, risk maps were generated from these values to visualize the spatial distribution of high-risk areas within the city. iF in tap water ranger in concentration from 1.3 – 7.3 mg/L (ppm). We estimated HQ in a range of 0.63 to 3.73. iF ex-posure in tap water is a health problem that must be addressed, carrying out risk communication actions that allow the population to take care of their health through simple actions, avoiding future health costs.

Background: This study investigates microvascular changes in the dermis and muscle following a balneotherapy regimen prescribed by therapeutic protocols. Methods: Thirty-five inpatients participated in a two-week balneal course involving the application of mud and hypersaline water. Mud was applied outdoors in the summer as cold mud ointment and indoors year-round as mud packs or mud baths alternated with hypersaline water baths. Biopsies of the skin and muscle were obtained twenty-four hours post-discharge and prepared histologically. Results: Analysis focused on the epidermis, dermis, and muscle. Microvascular changes observed included increased caliber and number of open capillaries, as well as the presence of angiogenesis vessels. Statistical analysis showed significant differences in angiogenesis vessels between cold mud ointment and mud pack treatments compared to control and mud bath groups. A higher number of angiogenesis vessels were observed in the dermis in the mud pack group and in the muscle with mud cold ointment. Repeated thermal stimulation with mud and hypersaline water over two weeks produced histologically evident tissue modifications, persisting in the dermis and muscle at least twenty-four hours post-treatment completion.

The increasing variability of precipitation, higher temperatures and recurring droughts in the semi-arid regions due to climate change are leading to increased aridity, resulting in scarcer water resources for crops. The present study aimed to analyse the spatial distribution of climate variables related to water resources in the olive-growing areas throughout Extremadura, southwestern Spain. To perform this task, three climate variables were used: potential evapotranspiration of the crop, the FAO aridity index and the annual water requirement. Considering data from 58 weather stations located throughout Extremadura and 17 along boundaries with at least 30-year length (within the 1991-2021 period), each variable was computed at each station. After calculating some descriptive statistics, a multivariate geostatistical (regression-kriging) algorithm, incorporating secondary information on elevation and latitude, was used to accurately map each climate variable. Later, temporal trends and their magnitude were analysed using the Mann-Kendall test and the Sen’s estimator, respectively. The highest evapotranspiration and water requirements are located in the southern part of the region, which has large areas dedicated to olive cultivation. In the northern part of the region, there is greater spatial variability in evapotranspiration and, consequently, in water requirements for olive groves due to the more rugged topography. Similarly, the olive-growing areas with the highest aridity are also in the south of Extremadura. In most areas of Extremadura, olive cultivation requires appropriate irrigation for optimal productivity. According to evapotranspiration trends, the water requirements will become greater in the future. However, it is not guaranteed that the water supply will be sufficient in olive-growing areas where aridity is higher and water resources are scarce. The results of this study are very important for evaluating water deficit and water resources in vulnerable olive-growing areas throughout Extremadura.

Understanding the interrelationships between land use, climate change, and regional water yield is critical for effective water resource management and ecosystem protection. However, comprehensive insights into how water yield evolves under different land use scenarios and climate change remain elusive. This study employs the Integrated Valuation of Ecosystem Services and Trade-offs (InVEST) models, Patch-generating Land Use Simulation (PLUS) model, and Geodetector within a unified framework to evaluate the dynamics of land use, water yield, and their relationships with various factors (meteorological, social, economic, etc.). To forecast the Land Use/Cover Change (LUCC) pattern of the Yellow River Basin by 2030, three scenarios were considered: economic development priority (Scenario1), ecological development priority(Scenario2), and cropland development priority(Scenario3). Climate change scenarios were constructed using CMIP6 data, representing low stress (SSP119), medium stress (SSP245), and high stress (SSP585) conditions. The results show the following: (1) From 2000 to 2020, cropland was predominant in the Yellow River Basin, Henan Province, with significant land conversion to impervious land (construction land) and forest land; (2) Water yield changes during this period were primarily influenced by meteorological factors, with land use changes having negligible impact; (3) By 2030, the water yield of Scenario1 is highest among different land use scenarios, marginally surpassing ecological development priority by 0.5%; (4) Climate scenarios reveal significant disparities, with SSP126 yielding 67% higher water production than SSP245, driven predominantly by precipitation; (5) Geodetector analysis identifies precipitation as the most influential single factor, with significant interactions among meteorological and socio-economic factors. These findings offer valuable insights for policymakers and researchers in formulating land use and water resource management strategies.

The purpose of this work is to analyze heat-treated ash wood at temperature of 185 ºC, in order to analyze its dimensional stability. For comparison, native ash/ not thermally treated wood, was be used. In order to analyze heat-treated ash wood, some main properties such as water absorption, swelling in thickness, roughness, Brinell hardness, modulus of rupture and elasticity, color change toward black with CIELab space, and many others properties were determined and processed. The results obtained after processing the experimental data have showed that heat-treated ash wood had good physical properties as absorption and swelling in thickness, and the slight increase in elasticity offers new fields of use. As a general conclusion of the work, it was established that the ash wood can be properly thermally treated, the dimensional stability characteristics being very good, and the decrease in bending resistance being almost imperceptible.

To clarify effects of weathered coal humic acid on water-stable aggregates and pore characteristics of reclaimed cambisol, this research analyzed the evolution characteristics of soil aggregates and pores. Effects of different humic acid dosages (0, 1%, 3%, and 5% by weight) and application period (1 year, 2 years, and 3 years) on soil aggregates and organic carbon components in soil water-stable aggregates were investigated. The results showed that water-stable macroaggregates (&gt;0.25 mm) had the highest content in the first year; but in the third year, water-stable microaggregates (0.053–0.25 mm) had the highest content, and silt and clay (&lt;0.053 mm) were at a maximum. In the third year of 5% treatment, mean weight and geometric mean diameters were the largest, soil structure was the most stable, and TOC and water-stable microaggregates (0.053–0.25 mm) in soil had the highest proportions. For 5% treatment, the majority of irregular pores were independent in the first year, and number of pores decreased in the second year, but average pore volume increased, forming robust connected pores. In the third year, the number of elongated and irregular pores increased. In the third year of 5% treatment, most pores were irregular and of size &gt;100 μm, and soil structure was the most stable.