Prokaryotic genomes are dynamic tapestries that are strongly influenced by mobile genetic elements (MGEs), including transposons (Tn’s), plasmids, and bacteriophages. Of these, miniature inverted-repeat transposable elements (MITEs) are undoubtedly the least studied MGEs in bacteria and archaea. This review explores the diversity and distribution of MITEs in prokaryotes and describes what is known about their functional roles in the host and involvement in genomic plasticity and evolution.

Abstract: Colistin is a last-resort antimicrobial for treating multidrug-resistant Gram-negative bacteria. Phe-notypic colistin resistance is highly associated with plasmid-mediated mobile colistin resistance (mcr) genes. mcr-bearing Enterobacteriaceae have been detected in many countries, with the emergence of colistin-resistant pathogens a global concern. This study assessed the distribution of mcr-1, mcr-2, mcr-3, mcr-4, and mcr-5 genes with the phenotypic colistin resistance in isolates from diarrheal infants and children in Bangladesh. Bacteria were identified using the API-20E biochemical panel and 16s rDNA gene sequencing. Polymerase chain reac-tions detected mcr gene variants in the isolates. Their susceptibilities to colistin were determined by agar dilu-tion and E-test by minimal inhibitory concentration (MIC) measurements. Over 30.0% (69/225) of isolates showed colistin resistance by agar dilution assessment (MIC> 2.0 μg/mL). Overall, 15.5% of isolates carried mcr genes (7, mcr-1; 17, mcr-2; 13, mcr-3; and co-occurrence occurred in 2 isolates). Clinical breakout MIC val-ues (≥ 4 μg/mL) were associated with 91.3% of mcr-positive isolates. The mcr-positive pathogens include twenty Escherichia spp., five Shigella flexneri, five Citrobacter spp., two Klebsiella pneumoniae, and three Pseudo-monas parafulva. mcr-genes appeared to be significantly associated with phenotypic colistin resistance phe-nomena (p=0.000), with 100% colistin-resistant isolates showing MDR phenomena. Age and sex of patients showed no significant association with detected mcr variants. Overall, mcr-associated colistin-resistant bacte-ria have emerged in Bangladesh, which warrants further research to determine their spread and instigate ac-tivities to reduce resistance.

Recently, volatile organic compounds (VOCs) have been shown to act as precursors of secondary organic particles that react with ultraviolet rays in the atmosphere and contribute to photochemical smog, global warming, odor, and human health risks, highlighting the importance of VOC management. In this study, we measured VOC concentrations in various contexts including industrial and residential areas of Bucheon, Korea, through mobile laboratory and proton-transfer-reaction time-of-flight mass spectrometry methods to determine winter VOC concentrations, visualized the data based on spatial information, and used the results to develop an air quality management plan. For this purpose, global information system (GIS)-based air quality data and various environmental variables were comprehensively reviewed to assess spatial and temporal concentrations in three dimensions rather than in tables and graphs. Among VOCs, the levels of toluene, methanol, and n+i-butene were relatively high, with average concentrations of 48.3 ± 67.2, 34.4 ± 102.7, and 32.6 ± 57.7 ppb, respectively, at the end of the working day. The highest concentrations occurred near the Ojeong Industrial Complex. Mobile pollution sources are also a major driver of VOCs, highlighting the necessity of comprehensively reviewing traffic variables such as road level, estimated traffic volume, and average speed when identifying hotspots of air pollution. GIS-based visualization analysis techniques will improve the efficiency of air quality management.

The rapid increase in the number of mobile phone base stations (MPBS) has raised global concerns about the potential adverse health effects of exposure to radiofrequency electromagnetic fields (RF-EMF). The application of machine learning techniques can enable healthcare professionals and policymakers to proactively address concerns surrounding RF-EMF exposure near MPBS. In this study, we investigated the potential of machine learning models to predict health symptoms associated with RF-EMF exposure in individuals residing near MPBS.We utilized support vector machine (SVM) and random forest (RF) algorithms, incorporating 11 predictors related to participants' living conditions. A total of 699 adults participated in the study, and model performance was assessed using sensitivity, specificity, accuracy, and the area under the receiver operating characteristic curve (AUC). The SVM-based model demonstrated strong performance, achieving accuracies of 85.3%, 82%, 84%, 82.4%, and 65.1% for headache, sleep disturbance, dizziness, vertigo, and fatigue, respectively. The corresponding AUC values were 0.99, 0.98, 0.920, 0.89, and 0.81. Compared to the RF model and a previously developed model, the SVM-based model exhibited higher sensitivity, particularly for fatigue, with sensitivities of 70.0%, 83.4%, 85.3%, 73.0%, and 69.0% for these five health symptoms. Particularly for predicting fatigue, sensitivity and AUC were significantly improved (70% vs 8% and 11.1% for SVM, MLPNN, and RF, respectively, and 0.81 vs 0.62 and 0.64, for SVM, MLPNN, and RF, respectively). These findings suggest that machine learning methods, specifically SVM, hold promise in effectively managing health symptoms in individuals residing near or planning to settle in the vicinity of MPBS.

In this work we present some driving strategies for a type of omnidirectional mobile robot, the offset-differential robot. This system presents omnidirectionality while using any type of standard wheels, allowing for applications in all terrain. The work is based on the full kinematic and dynamic analysis of the robot, including the passive elements, to explain some unexpected behaviors that appear during its motion. The stable and unstable behaviors are characterized and some driving strategies are stated in order to achieve the desired performance regarding precise positioning and speed.

In this article, the research team has systematically developed a method to model the kinematics and dynamics of a 3-wheeled robot subjected to external disturbances and sideways wheel sliding. These models will be used to design control laws that compensate for wheel slippage, model uncertainties, and external disturbances. These are control algorithms developed based on Dynamic Surface Control (DSC). Adaptive trajectory tracking DSC algorithm using fuzzy logic system (AFDSC) and radial neural network (RBFNN) with fuzzy logic system to overcome the disadvantages of DSC and expand the application domain for wheeled Mobile Robots (WMR). However, this Adaptive Fuzzy Neural Network Dynamic Surface Control (AFNNDSC) adaptive controller ensures the closed system is stable and follows the preset trajectory in the presence of wheel slippage model uncertainty and is affected by significant amplitude disturbances. The stability and convergence of the closed-loop system are guaranteed based on the Lyapunov analysis. The AFNNDSC adaptive controller is evaluated by simulation on MATLAB/Simulink software and in a steady state. The maximum position error on the right wheel and left wheel is 0.000572 (m) and 0.000523 (m), and the angular velocity tracking error in the right and left wheels of the control method is 0.000394 (rad/s). The experimental results show the correctness of the theoretical analysis, the effectiveness of the proposed controller, and the possibility of practical application.

The Internet of Things (also known as IoT), a revolution, has enhanced the relevance of mobile employees' job efficiency in mobile crowd sensing (MCS). Incentives based on reputation for mobile workers (MW) play an important role in increasing service utilization, motivating mobile employees, and developing confidence in the service. The cell phone is the most exploited entity in mobile crowd-sensing MCS and cloud computing. In the underlying investigation, we observed that they had not evaluated the complexity level of a task, resulting in a strong reputation for executing multiple basic tasks. A person who completes a tough task may have a lower reputation score. Complexity levels of tasks (CLT) were developed for reputation evaluation on a crowd-sensing network, which would be utilized to evaluate the MW reputation. We offered simple and complex levels of challenges to assess reputation scores. Tasks receive incentives based on their reputation. By measuring reputation on (CLT) complexity level of task, this research will help the system to Maintain the reputation of the mobile worker so that entities of the system get the maximum benefit out of it, by hiring well-reputed mobile workers and MW receive an incentive on it. Furthermore, we conduct a comparative analysis between our scheme and various machine learning algorithms to identify the algorithm that best performs in evaluating task complexity. Considering both the simple and complex reputation scores, the comparison suggests that after analyzing the data, it is clear that the CLT (proposed) scheme and the Linear regression scheme not only outperformed the Neural Network scheme in terms of Complex Reputation Scores but also in terms of Simple Reputation Scores. We also apply statistical tests, such as p-tests and t-tests, to determine the significance of the results obtained from different algorithms. Considering MW 308, MW 345, and MW 1045's efforts and abilities, the MCS system may offer incentives and awards to further motivate and consider their continuing contributions. This reputation-based incentivization technique not only encourages strong competition among mobile workers, but also makes sure the delivery of high-quality services inside the MCS system.

Live video streaming has become one of the main multimedia trends in networks in recent years. Providing Quality of Service (QoS) during live transmissions becomes a challenge due to the stringent requirements for low latency and minimal interruptions. This scenario has led to a high dependence on cloud services, implying a widespread usage of Internet connections, which constrains contexts where an Internet connection is not available. Thus, alternatives such as Mobile Ad Hoc Networks (MANETs) emerge as potential communication techniques. These networks operate autonomously with mobile devices serving as nodes, without the need for coordinating centralized components. However, these characteristics lead to challenges to live-video streaming, such as dynamic node topologies or periods of disconnection. Considering these constraints, this paper investigates the application of Artificial Intelligence (AI)-based classification techniques to provide adaptive streaming in MANETs. For this, a software-driven architecture is proposed to route stream in offline MANETs, predicting the stability of individual links and compressing video frames accordingly. The proposal has been implemented and assessed in a laboratory context, analyzing the model performance and QoS metrics. As a result, the model is implemented in a decision forest algorithm, which provides 95.9% of accuracy. Also, obtained latency values become assumable for video streaming, manifesting a reliable response for routing and node movements.

In the paper we suggest an implementation of the non-commutative logic and apply its operators for decision-making in the group of autonomous agents. The suggested operators extend the uninorm and absorbing norm aggregators and use an additional asymmetry parameter that defines the “level of non-commutativity”. The value of this parameter is specified using the perception bias of humans measured in the experiments. The suggested operators and decision-making method are illustrated by simulated behavior of mobile robots in the group.

As most Korean OTT subscribers use mobile devices as their primary medium for watching OTT video content, mobile network traffic is soaring. However, the existing build-out of mobile communication technology – such as deploying more base stations or expanding the network bandwidth – is struggling to keep pace with the enormous increased demands of mobile network traffic. Accordingly, wireless device-to-device (D2D) caching networks are considered one of the most reliable alternatives for reducing the overload from mobile network traffic caused by streaming video content online. However, wireless D2D caching networks have pros and cons, like any other technology. Thus, this study aims to examine the practical decision-making process of mobile OTT service users in response to the application of wireless D2D caching networks on their mobile devices. An online survey of 94 respondents was conducted in South Korea during 19–23 May 2022; the data obtained were analyzed using the analytic hierarchy process (AHP) approach. The study finds that it was the risks, rather than the situational conditions and benefits, that mostly affected mobile OTT service users’ behavioral intentions and strategies. Streaming video content using mobile data or Wi-Fi was perceived as the most viable option. Mobile OTT service users were also willing to take the leap of shifts towards downloading video content in advance rather than adopting wireless D2D caching networks on a mobile device. However, mobile OTT service users’ decisions are heavily dependent on situational conditions related to use of mobile OTT services that make the quality of service consumption different. As one of the first to examine the responses of mobile OTT service users, this study provides meaningful implications for a timely and sensitive issue.

As an emerging network paradigm, Space-Air-Ground integrated networks (SAGIN) has attracted the attentions from academia and industry. That is because SAGIN can implement seamless global coverage and connections among electronic devices in space, air, and ground spaces. Additionally, the shortages of computing and storage resources in mobile devices greatly affect the quality of experiences for intelligent applications. Hence, we devise to integrate SAGIN as an abundant resource pool into mobile edge computing environments (MEC). To facilitate efficient processing, we need to solve the optimal task offloading decisions. Different from the existing MEC task offloading solutions, we have to face some new challenges, such as the fluctuation of processing capability for an edge computing node, the uncertainty of the transmission latency caused by the heterogeneous network protocols, the uncertain amount of uploaded tasks during a period, and so on. In this paper, we firstly describe a task offloading decision problem in new challenge environments. But, we cannot use the standard robust optimization and stochastic optimization methods to obtain the optimal result under the uncertain network environments. In this paper, we propose the condition value at risk-aware distributionally robust optimization algorithm, named as CVAR-DRO, to solve the task offloading decision problem. The proposed CVAR-DRO method combines the distributionally robust optimization and the condition value at risk model for solving the optimal result. And then, We have evaluated our approach in simulation SAGIN environments with the confidence interval, the number of mobile task-offloading and the various parameters. We compare our proposed CVAR-DRO algorithm with the state-of-the-art algorithms, such as the standard robust optimization algorithm, the stochastic optimization algorithm, the DRO algorithm, and the brute algorithm. The experimental results show that CVAR-DRO can get a sub-optimal mobile task-offloading decision. Overall, CVAR-DRO is more robust than others to the new challenges mentioned above in SAGIN.

Wireless sensor networks (WSNs) are a critical research area with numerous practical applications. WSNs are utilized in real-life scenarios, including environmental monitoring, healthcare, industrial automation, smart homes, and agriculture. As WSNs advance and become more sophisticated, they offer limitless opportunities for innovative solutions in various fields. However, due to their unattended nature, it is essential to develop strategies to improve their performance without draining the battery power of the sensor nodes, which is their most valuable resource. This paper proposes a novel sink mobility model based on constructing a bipartite graph from a deployed wireless sensor network. Using the bipartite graph’s properties, the mobile sink node can visit stationary sensor nodes in an optimal way to collect data and transmit it to the base station. We evaluated the proposed approach through simulations using the NS-2 simulator to investigate the performance of wireless sensor networks when adopting this mobility model. Our results show that using the proposed approach can significantly enhance the performance of wireless sensor networks while conserving the energy of the sensor nodes.

The hospital indoor environment plays a significant role in shaping the microbial exposures that humans encounter. Resistance to antibiotics is one of the mechanisms employed by bacteria to develop resilience against stress in indoor environments. The extensive usage of antibiotics has been a key factor in driving changes in the ecological function of antibiotic resistance genes (ARGs) and their acquisition by pathogenic bacteria. By integrating the 16S rRNA Illumina sequencing and high throughput-qPCR approaches with water and air dust samples across seven departments at Peking University Shenzhen Hospital, China, this study yielded intriguing findings regarding the department-specific variation, transmission, and correlation of bacteria, ARGs and MGEs within the hospital indoor environment. One notable observation was that the seasonal variation played a vital role in shaping the bacterial composition in the overall hospital indoor environment across seven studied departments. Nevertheless, a similar significant seasonal impact was only observed in the blood test room and emergency departments, rather than in the other five departments. Another intriguing finding was the correlation between ARGs and MGEs abundance. This correlation was evident in the overall hospital indoor environment, which was conversely not found in the emergency, pneumology and gynecology departments. Additionally, while there was no significant relationship that occurred between bacterial communities and ARGs/MGEs within the hospital, the gynecology department demonstrated a close link between bacterial communities and the presence of ARGs/MGEs. Notably, the gynecology department also stood out as an important source of bacteria and ARGs/MGEs for other departments. This study underscores the need for careful surveillance and monitoring of antibiotic resistance, particularly in Legionella spp. in man-made water systems. The findings also show the importance of monitoring and understanding the genetic elements such as Tp614 involved in gene transfer and recombination, as well as their impact on antimicrobial treatment efficacy.

Introduction: Austere environments include the wilderness and many lower-and-middle-income countries, many of these facing unrest and war. The access to advanced diagnostic equipment is often unaffordable even if available and is often liable to breakdown. This short review paper examines the options available to medical professionals to undertake clinical and point of care diagnostic testing in resource constrained environments and also illustrates the development of mobile advanced diagnostic equipment. The aim is to provide an overview of the spectrum and functionality of these devices beyond clinical acumen.

The Fruit Harvest Helper, a mobile application developed by Northwest Nazarene University’s (NNU) Robotics Vision Lab, aims to assist farmers in estimating fruit yield for apple orchards. Currently, farmers manually estimate the fruit yield for an orchard, which is a laborious task. Fruit Harvest Helper seeks to simplify their process. While prior research efforts at NNU concentrated on developing an iOS app for blossom detection, this current research aims to adapt that smart farming application for apple detection across multiple platforms, iOS and Android. The old and new applications were designed with an intuitive user interface that is easy for farmers to use, allowing for quick image selection and processing. Unlike before, the adapted app utilizes a color ratio-based image segmentation algorithm implemented in OpenCV C++ to detect apples in apple tree images selected for processing. The results of testing the algorithm with a dataset of images indicate an 8.52% Mean Absolute Percentage Error (MAPE) and a Pearson correlation coefficient of 0.6 between detected and actual apples on the trees. These findings were obtained by evaluating the images from both the east and west sides of the trees, which was the best method to reduce the error of this algorithm. Although the Fruit Harvest Helper shows promise, there are many opportunities for improvement. These opportunities include exploring alternative machine-learning approaches for apple detection, conducting real-world testing without any human assistance, and expanding the app to detect various types of fruit. The Fruit Harvest Helper mobile application is among the many mobile applications contributing to precision agriculture, nearing readiness for farmers to use in yield monitoring and farm management.

ACL instability poses a significant challenge in traumatology and orthopedic medicine, often requiring accurate diagnosis for appropriate treatment. While the pivot-shift test offers a crucial means of assessment, its reliance on subjective interpretation underscores the need for supplementary imaging studies. This study aims to address this limitation by developing a Bayesian classification algorithm tailored for integration into a mobile application. Using the built-in inertial sensors of smartphones, this new approach aims to dynamically evaluate rotational stability during knee examinations. Orthopedic specialists conducted knee evaluations on 52 subjects, with subsequent analysis revealing interesting insights. Intraobserver and interobserver analyses, as measured by ICC, demonstrated strong agreement both in terms of timing between maneuvers (ICC = 0.94) and signal amplitude (ICC = 0.71-0.66). Notably, the Bayesian algorithm successfully classified 95% of joint hypermobility cases, with an additional 7 cases of hyperlaxity identified by the Pivot-Shift Meter (PSM). These findings highlight the practicality and effectiveness of implementing a Bayesian classification algorithm within a mobile application for assessing and categorizing signals captured by smartphone inertial sensors during the pivot-shift test.

This paper introduces an alternative method to design the path following controller of an under-actuated spherical mobile robot, which has a single pendulum structure its inside as a driving mechanism. The mechanism has an under-actuated problem; two inputs for the roll and pitch but no direct input for the yaw. In order to overcome this problem, the proposed method defines a virtual reference input for the heading direction. The virtual reference input works as a control input since it can be arbitrarily designed just like the reference input of a conventional system. The control scheme using the defined virtual reference input achieves the stabilization and path following control of the under-actuated spherical mobile robot without any additional control technique. The stability of the proposed control scheme is guaranteed by Lyapunov stability analysis, and simulation results are given to demonstrate its performance.

This study delves into the performance evaluation of an avant-garde technology in mobile communications known as Large Intelligent Surface (LIS), poised to be an integral component of the sixth-generation (6G) networks. This groundbreaking technology has the potential to markedly augment the Signal-to-Interference plus Noise Ratio (SINR) by orchestrating signals originating from the base station through a network of digitally controlled reflectors meticulously engineered to modulate the phase of incoming electromagnetic waves. A LIS can establish a Line of Sight (LoS) within channels that inherently do not have a LoS. In addition, it can also be optimized to increase transmission security by ensuring that the signal reaches only the target users of the message with better quality. In this study, analytical expressions were derived to calculate the distribution parameters, the bit error probability, and the secrecy outage probability. These calculations consider the presence of an eavesdropper link, highlighting the potential of the LIS to increase the confidentiality of digital communication systems. The accuracy of the proposed formulas was demonstrated by showing how the performance of the LIS varies with different design parameters and environmental fading.

This paper introduces a novel approach to addressing the challenge of accurately timing short distance runs, a critical aspect in the assessment of athletic performance. Electronic photoelectric barriers, although recognized for their dependability and accuracy, have remained largely inaccessible to non-professional athletes and smaller sport clubs due to their high costs. A comprehensive review of existing timing systems reveals that claimed accuracies beyond 30 milliseconds lack experimental validation across most available systems.To bridge this gap, a mobile, camera-based timing system is proposed, capitalizing on consumer-grade electronics and smartphones to provide an affordable and easily accessible alternative. By leveraging readily available hardware components, the construction of the proposed system is detailed, ensuring its cost-effectiveness and simplicity. Experiments involving track and field athletes demonstrate the proficiency of the proposed system in accurately timing short distance sprints. Comparative assessments against a professional photoelectric cells timing system reveal a remarkable accuracy of 62 milliseconds, firmly establishing the reliability and effectiveness of the proposed system. This finding places the camera-based approach on par with existing commercial systems, thereby offering non-professional athletes and smaller sport clubs an affordable means to achieve accurate timing.In an effort to foster further research and development, open access to the device's schematics and software is provided. This accessibility encourages collaboration and innovation in the pursuit of enhanced performance assessment tools for athletes.

While current video quality assessment research predominantly revolves around resolutions of 4K and beyond, targeted at Ultra High-Definition (UHD) displays, effective video quality for mobile video streaming remains primarily within the range of 480p to 1080p. In this study, we conducted a comparative analysis of the Quality of Experience (QoE) for widely implemented video codecs on mobile devices, specifically Advanced Video Coding (AVC), its successor High-Efficiency Video Coding (HEVC), and Google's VP9. Our choice of 720p video sequences from a newly developed database, all with identical bitrates, aimed to maintain a manageable subjective assessment duration, capped at 35-40 minutes. To mimic real-time network conditions, we generated stimuli by streaming original video clips over a controlled emulated setup, subjecting them to eight different packet loss scenarios. We evaluated the quality and structural similarity of the distorted video clips using objective metrics, including Video Quality Metric (VQM), Peak Signal-to-Noise Ratio (PSNR), Video Multi-Method Assessment Fusion (VMAF), and Multi-Scale Structural Similarity Index (MS-SSIM). Subsequently, we collected subjective ratings through a custom mobile application developed for Android devices. Our findings revealed that VMAF accurately represents the degradation in video quality compared to other metrics. Moreover, in most cases, HEVC exhibits an advantage over both AVC and VP9 under low packet loss scenarios. However, it is noteworthy that in our test cases, AVC outperformed HEVC and VP9 in scenarios with high packet loss, based on both subjective and objective assessments. Our observations further indicate that user preferences for the presented content contribute to video quality ratings, emphasizing the importance of additional factors that influence the perceived video quality of end-users.

The rapid growth of equipment tasks in 5G large-scale machine-type communication scenarios presents challenges due to user equipment’s (UE) limited computing power and power constraints. To address these limitations, task offloading to unmanned aerial vehicles (UAVs) has gained attention. However, traditional cloud computing centres far from the UE fail to meet latency requirements. Mobile Edge Computing (MEC) emerges as a solution by deploying computing servers at the edge of the cellular network to enhance service responsiveness. However, traditional MEC solutions need more flexibility. This paper explores the advantages of UAVs, including flexibility and rapid deployment, and considers UAV power constraints. It proposes a joint optimization approach for user offloading strategies and UAV trajectories to minimize the overall energy consumption of UE. By leveraging the benefits of UAVs and MEC, the proposed method aims to improve task execution efficiency in energy-constrained 5G machine-type communication scenarios.

Barrier coverage is a fundamental application in wireless sensor networks, which is widely used to protect a region through intruder detection for smart city. In this paper, we study a new branch of barrier coverage, named warning barrier coverage (WBC). Different from the classic barrier coverage, WBC has the inverse protect direction, which protects unexpected visitors by warning them away from the region enclosed by sensor barriers. The WBC holds a promising prospect in many danger keep out applications for smart city. For example, a WBC can enclose the debris area in the sea and alarm any approaching ships in order to avoid their damaging propellers. One special feature of WBC is that the target region is usually dangerous and its boundary is previously unknown. Hence, the scattered mobile nodes need to detect the boundary and form the barrier coverage themselves. It is challenging to form these distributed sensor nodes into a barrier because a node can sense only the local information and there is no global information of the unknown region or other nodes. To this end, we propose a novel solution AutoBar for mobile sensor nodes to automatically form a WBC for smart city. To pursue the high coverage quality, we theoretically derive the optimal distribution pattern of sensor nodes using convex theory. Based on the analysis, we design a fully distributed algorithm that enables nodes to collaboratively move towards the optimal distribution pattern. In addition, AutoBar is able to reorganize the barrier even any node is broken. To validate the feasibility of AutoBar, we develop the prototype of the specialized mobile node, which consists of two kinds of sensors: one for boundary detection and another for visitor detection. Based on the prototype, we conduct extensive real trace driven simulations in various smart city scenarios. Performance results demonstrate that AutoBar outperforms the existing barrier coverage strategies in terms of coverage quality, formation duration, and communication overhead.

With the proliferating of video surveillance system deployment and related applications, real-time video analysis is very critical to achieve intelligent monitoring, autonomous driving, etc. It is non-trivial to achieve high accuracy and low latency video stream analysis through the traditional cloud computing. In this paper, we propose a non-orthogonal multiple access (NOMA) based edge real-time video analysis framework with one edge server (ES) and multiple user equipments (UEs). A cost minimization problem composed of delay, energy and accuracy is formulated to improve the QoE of UEs. In order to efficiently solve this problem, we propose the joint video frame resolution scaling, task offloading, and resource allocation algorithm based on the Deep Q-Learning Network (JVFRS-TO-RA-DQN), which effectively overcomes the sparsity of the single-layer reward function and accelerates the training convergence speed. JVFRS-TO-RA-DQN consists of two DQN networks to reduce the curse of dimension, which respectively select the offloading and resource allocation action, the resolution scaling action. Experimental results show that JVFRS-TO-RA-DQN can effectively reduce the cost of transmission and computation, and have better performance in convergence compared to other baseline.

Reducing the construction time for large logistics buildings can result in reduced construction management costs and economic gains from early operation. A large logistic building with a heavy load and long spans was constructed as a precast concrete (PC) structure, which requires the use of a sizable crane to lift heavy PC members. A basic analytical approach is employed to resolve potential errors in the planning of PC member erection and to build a systematic erection plan. Calculation techniques for the trajectory distance, which use the crane location, are applied to select an erection plan that minimizes crane work. A crane trajectory distance calculation algorithm for sustainable PC member erection in large logistic buildings with heavy loads and long spans has been developed. The developed model aids in creating simulation and optimization models to ensure minimal usage of cranes in the future and determining cost, construction time, CO2 emissions, and energy use for each erection plan.

Automated Guided Vehicles are self-guided vehicles used in manufacturing and warehouses for material transport. They play a vital role in just-in-time material delivery, ensuring smooth production lines. However, disruptions in their fixed routes can lead to efficiency losses. This paper studies unexpected disruptions in mobile robot routes, assessing the costs of rectification using the E* analysis. The study highlights the significant additional cost of such disruptions, underscoring the importance of their consideration in AGV route planning to enhance system resilience.

Facing the charging difficulties of free-floating shared electric vehicle and the high cost of mobile charging for single demand, this article proposes a collaborative charging planning method based on the complementary advantages of fixed charging stations and mobile charging vehicles, which can charge shared electric vehicles more efficiently and reduce the charging cost at the same time. A bi-level programming model for fixed and mobile cooperative charging is constructed. The upper level of the model is the minimization model of system charging total cost, seeking the optimal charging scheme and the number of mobile charging vehicles. The lower model is a fixed and mobile cooperative charging path planning model, which calculates the optimal routes for mobile charging vehicles and the shared electric vehicles that need to be transferred to the fixed charging station. The example results show that the cost of the proposed fixed-mobile cooperative charging scheme is reduced by 12.6% compared with the pure fixed charging scheme and 14.9% compared with the pure mobile charging scheme

Edge computing helps radio-supported mobile systems to process computing tasks on the side of servers. The proximity to an edge computing node avoids excessive latencies, which benefits the calculation of real-time algorithms. Special computing needs arise because mobile systems are often so limited in weight and energy that they cannot carry powerful on-board computers. We propose the use of FPGA-based co-processors (FPGA: Field Programmable Gate Array) to handle computations in an edge node. The calculation of the Fast Fourier Transformation (FFT) will be presented as an example of a co-processor. The use of FPGA-based co-processors poses a particular challenge when a mobile system leaves its radio cell, and the computing context must be transferred to another edge node. The article first addresses specific edge computing requirements, such as case-by-case reconfiguration of computing hardware and the handover mechanism from one edge node to another. Using the example of an FPGA-based FFT co-processor, we describe its development, which was carried out under the condition that mobile clients can request different co-processors and that they can also change the edge node when changing the radio cell. The latter requires passing the co-processor context. For the FPGA, this means that the co-processor is part of a partially reconfigurable environment and must support the handover mechanisms in hardware. At the end we indicate the need for FPGA resources and compare this with alternative solutions.

Color image binarization plays a pivotal role in image preprocessing work, significantly impacting subsequent tasks, particularly in text recognition. This paper concentrates on Document Image Binarization (DIB), aiming to separate a image into foreground (text) and background (non-text content). Through a thorough analysis of conventional and deep learning-based approaches, we conclude that prevailing DIB methods leverage deep learning technology. Furthermore, we explore the receptive fields pre- and post-network training to underscore the Transformer model's advantages. Subsequently, we introduce a lightweight model based on the U-Net structure, enhanced with the Mobile ViT module to better capture global information features in document images. Given its adeptness at learning both local and global features, our proposed model exhibits superior performance on two standard datasets (DIBCO2012 and DIBCO2017) compared to state-of-the-art methods. Notably, our proposed DIB method presents a straightforward end-to-end model devoid of additional image preprocessing or post-processing. Moreover, its parameter count is less than a quarter of the HIP'23 model, which achives best results on three datasets(DIBCO2012, DIBCO2017 and DIBCO2018). Finally, two sets of ablation experiments were conducted to verify the effectiveness of the proposed binarization model.

This paper presents a novel framework for Collaborative Learning Networks (CLNs) in classrooms, aiming to optimize resource utilization and enhance educational services. The study addresses the inefficiencies of traditional education models, particularly the underutilization of computational resources and limited access to specialized software. The proposed framework employs a mix of task-based and random allocation strategies to distribute computational tasks within the CLN, considering each device’s capabilities and task requirements. The findings show significant improvement in resource utilization, facilitated by device-to-device collaboration and task sharing, thus enriching students’ learning experiences. This work contributes to optimizing resource utilization in education, advancing the field of CLNs.

Autonomous mobile robots are essential to the industry, and human-robot interactions are becoming more common nowadays. These interactions require that the robots navigate scenarios with static and dynamic obstacles in a safely manner, avoiding collisions. This paper presents a physical implementation of a method for dynamic obstacle avoidance using a Long Short-Term Memory (LSTM) neural network that obtains information from the mobile robot’s LiDAR for it to be capable of navigating through scenarios with static and dynamic obstacles while avoiding collisions and reaching its goal. The model is implemented using a TurtleBot3 mobile robot within an OptiTrack Motion Capture (MoCap) system for obtaining its position at any given time. The user operates the robot through these scenarios, recording its LiDAR readings, target point, position inside the MoCap system, and its linear and angular velocities, all of which serve as the input for the LSTM network. The model is trained on data from multiple user-operated trajectories across five different scenarios, outputting the linear and angular velocities for the mobile robot. Physical experiments prove that the model is successful in allowing the mobile robot to reach the target point in each scenario while avoiding the dynamic obstacle, with a validation accuracy of 98.02%.

Colonoscopy, essential for diagnosing and treating colorectal cancer, relies on effective bowel preparation to inspect the colonic mucosa fully. Traditional education methods include printed instructions and verbal explanations, but these may not ensure clear patient understanding. Poor bowel preparation can obscure mucosal visibility, delaying cancer diagnosis and treatment. Using the outpatient’s Android mobile device, the mobile health care model is provided as a nursing guide to assist in bowel preparation for colonoscopy. This single-blinded, randomized trial en-rolled patients for colonoscopy at a Northern Taiwan gastroenterology center. Eligible patients were physically and mentally healthy and could communicate in Chinese. The study tested the ColonClean app during bowel preparation. After the procedure, endoscopists rated the prepara-tion quality using the Aronchick Scale. Data analysis with SPSS software (version 25.0) evaluated if the app significantly improved bowel preparation compared to those who did not use it. Forty patients were recruited for both the control (conventional method) and experimental (conven-tional method plus ColonClean app) groups. In the experimental group, endoscopists assessed bowel preparation quality; all achieved at least "Fair," with 75% receiving "Excellent" or "Good" ratings. The ColonClean App enhanced bowel preparation quality more effectively than tradi-tional nursing guidance.

In this article the problem of detection and isolation (FDI) in wheeled mobile robot is 1 treated. first of all we consider a master-slave robot system in which the master robot has to follow a 2 desired trajectory given by a well-determined control law, then the slave is controlled by the master. 3 However in real environment there is no ideality because faults can appear in the master or slave 4 or even the both and affect the system and may lead to unacceptable results so to ensure a well 5 functioning an extended kalman filter is tuned to diagnosis eventual faults and to generate residuals 6 in order to detect and isolate them. The performance of an estimator based on an EKF is simulated 7 based MATLAB Simulink simulations.

This paper examines the quantitative and qualitative situation of the current fixed and mobile Internet and its expected future. First, the number of users and penetration rate of the Internet, various types of services in different countries, the ranking of countries in terms of the mean and median download and upload Internet data speeds, Internet data volume, and number and location of data centers in the world are presented. The second task introduces and details twelve performance evaluation metrics for broadband Internet access. Third, different wired and wireless Internet technologies are introduced and compared based on data rate, coverage, type of infrastructure, and their advantages and disadvantages. Based on the technical and functional criteria, in the fourth work, two popular wired and wireless Internet platforms, one based on optical fiber and the other based on the 5G cellular network, are compared in the world in general and Australia in particular. Moreover, this paper has a look at Starlink as the latest satellite Internet candidate, especially for rural and remote areas. The fifth task outlines the latest technologies and emerging broadband Internet-based services and applications in the spotlight. Sixthly, it focuses on three problems in the future Internet in the world, namely the digital divide due to the different quality of the Internet and new Internet-based services and applications of emerging technologies, the impact of the Internet on social interactions, and hacking and insecurity on the Internet. Finally, some solutions to these problems are proposed.

Stress is an inherent sensation of being unable to handle demands and occurrences. If not properly managed, stress can develop into a chronic condition, leading to the onset of additional chronic health issues like cardiovascular illnesses and diabetes. Various stress meters have been suggested in the past, along with diverse approaches for its estimate. However, in the case of more serious health issues such as hypertension and diabetes, the results can be significantly improved. This study presents the design and implementation of a distributed wearable sensor computing platform with multiple channels. The platform aims to estimate stress levels in diabetes patients by utilizing a fuzzy logic algorithm that is based on the assessment of several physiological indicators. Additionally, a mobile application was created to monitor users' stress levels and integrate data on their blood pressure and blood glucose levels. Validation experiments were performed on patients with chronic diabetes, and the initial findings are presented in the study.

Providing user confidence in Mobile Government Services (MGS) is essential for the success of mobile government. This study aimed to test the moderating role of techno-skepticism in the impact of crisis management on mobile government. Some scholars have stated that government investment in mobile government services for public administration during the financial crisis is a critical issue for crisis management. In the constantly evolving and changing world, the rapid advancement of technology in modern societies has prompted an acceleration in investments in information and communication technologies. However, due to several inadequacies, citizens seem to respond negatively to the use of certain public technological services, leading them to develop a perspective of techno-skepticism. This issue has been cited in numerous scholarly studies as a critical subject for the effective implementation of technological innovations. The effectiveness of digital technology in the procurement of public services is highly dependent on the perceptions and behaviors of users. In this context, this study measured the attitudes of the participants and the connections between techno-skepticism, mobile government use, and crisis management among Northern Cyprus residents over 18 years old. The study employed a quantitative approach. A 5-point Likert scale was used to collect data by modifying the survey questions to fit the scope of the study. The study participants were selected using the random sampling method to acquire data from a total of 402 citizens. The study findings revealed that techno-skepticism mediates the impact of crisis management on mobile government. As a result, techno-skepticism is a critical and decisive factor in citizens’ mobile government use, affecting its utilization frequency. Techno-skepticism was also found to play a vital role in mobile government use. The current study represents a pioneering effort in testing the moderating role of techno-skepticism in the impact of crisis management on mobile government. It also provides various contributions to theory and practice, particularly in the fields of mobile government and the use of digital technologies.