Abstract: The Hanqu Joint Station of the Dingbian Oil Production Plant of Yanchang Oilfield Co., Ltd is located at the edge of the desert in northern China. the bad field conditions and strong sandstorm, the hardware of computer monitoring system of Joint Station is often damaged. At the same time, the core equipment of the joint station three-phase separator oil chamber liquid level is hard to achieve high precision constant value control, the general control algorithm is difficult to meet the control requirements.This paper proposed a design scheme of a oilfield joint station computer monitoring system based on the Siemens S7-300 PLC, the hardware of the monitoring system adopts the redundancy scheme of dual monitoring computers, dual programmable logic controllers (PLCs), and dual industrial Ethernet. The BP neural network PID control algorithm was used to realize constant value control of the oil chamber liquid level of the three-phase separator of the core equipment of the joint station，and realized high control precision. The monitoring system could well adapt to the harsh environment of the scene, and showed high reliability and efficiency.

Manual measurement of rock discontinuities is time-consuming and subjective according to the experience of the surveyor. This work proposes a three-dimensional laser scanning-based method for the semi-automatic identification of rock discontinuities. Multisite cloud scanning is performed with real-time kinematic (RTK)-assisted orientation to estimate the rock fracturing degree; then, discontinuity orientations are extracted with the man–machine interactive method or automatic method. The proposed method was applied to actual examples to illustrate its accuracy at identifying rock discontinuities. The sensitivity of the identification accuracy to different parameters was investigated.

Intra-articular fractures are a major cause of post-traumatic osteoarthritis (PTOA). Despite adequate surgical treatment, the long-term risk for PTOA is high. Previous studies reported that joint injuries initiate an inflammatory cascade characterized by elevation of synovial pro-inflammatory cytokines, which can lead to cartilage degradation and PTOA development. This review summarizes the literature on the post-injury regulation of pro-inflammatory cytokines and the markers of cartilage destruction in patients suffering from intra-articular fractures. METHODS We searched Medline, Embase, and Cochrane databases (1960–February 2020) and included studies that were performed on human participants and included control groups. Two investigators assessed the quality of the included studies using Covidence and the Newcastle-Ottawa Scale. RESULTS Based on the surveyed literature, several synovial pro-inflammatory cytokines, including interleukin (IL)-1β, IL-2, IL-6, IL-8, IL-12p70, interferon-y, and tumor necrosis factor-α, were significantly elevated in patients suffering from intra-articular fractures compared to control. A simultaneous elevation of anti-inflammatory cytokines such as IL-10 and IL-1RA was also observed. In contrast, IL-13, CTX-II, and aggrecan concentrations did not differ significantly between the compared cohorts. CONCLUSIONS Overall, intra-articular fractures are associated with an increase in inflammation-related synovial cytokines. However, more standardized studies which focus on the ratio of pro- and anti-inflammatory cytokines at different time points are needed.

This study aims to explore the possibility of estimating a multitude of kinematic and dynamic quantities using subject-specific musculoskeletal models in real-time. The framework was designed to operate with marker-based and inertial measurement units enabling extensions far beyond dedicated motion capture laboratories. We present the technical details for calculating the kinematics, generalized forces, muscle forces, joint reaction loads, and predicting ground reaction wrenches during walking. Emphasis was given to reduce computational latency while maintaining accuracy as compared to the offline counterpart. Notably, we highlight the influence of adequate filtering and differentiation under noisy conditions and its importance for consequent dynamic calculations. Real-time estimates of the joint moments, muscle forces, and reaction loads closely resemble OpenSim's offline analyses. Model-based estimation of ground reaction wrenches demonstrates that even a small error can negatively affect other estimated quantities. An application of the developed system is demonstrated in the context of rehabilitation and gait retraining. We expect that such a system will find numerous applications in laboratory settings and outdoor conditions with the advent of predicting or sensing environment interactions. Therefore, we hope that this open-source framework will be a significant milestone for solving this grand challenge.

Temporomandibular disorders (TMD) is a group of orofacial pain conditions which is the most common non-dental pain complaint in the maxillofacial region. Due to the complexity of the etiology and often cyclical nature of the disease, the diagnosis and management of TMD remain a challenge where consensus is still lacking in many aspects. While clinical examination is considered the most important process in the diagnosis of TMD, imaging may serve as a valuable adjunct in selected cases. Depending on the type of TMD, many treatment modalities have been proposed, ranging from conservative options to open surgical procedures. In this review, the authors discuss the present thinking in the etiology and classification of TMD, followed by the diagnostic approach and the current trend and controversies in management.

Recent studies suggest that the developmental curves in adolescence, related to the development of executive functions, could be fitted to a non-linear trajectory of development with progressions and retrogressions. Therefore, the present study proposes to analyze the pattern of development in Perceptual Inhibition (PI), considering all stages of adolescence (early, middle, and late) in intervals of one year. To this aim, we worked with a sample of 275 participants between 10 and 25 years, who performed a joint visual and search task (to measure PI). We have fitted exGaussian functions to the probability distributions of the mean response time across the sample and performed a covariance analysis (ANCOVA). The results showed that the 10- to 13-year-old groups performed similarly in the task and differ from the 14- to 19-year-old participants. We found significant differences between the older group and all the rest of the groups. We discuss the important changes that can be observed in relation to the nonlinear trajectory of development that would show the PI during adolescence.

The aim was to study alterations of bacterial communities in patients undergoing hip or knee arthroplasty to assess the impact of chlorhexidine gluconate soap decolonisation and systemic antibiotic prophylaxis. A Swedish multicentre, prospective collection of samples obtained from elective arthroplasty patients (n=83) by swabbing anterior nares, skin sites in the groin and the site of planned surgery, before and after arthroplasty surgery, was analysed by 16S rRNA (V3-V4) gene sequencing and a complementary targeted tuf gene sequencing approach to comprehensively characterise alterations in staphylococcal communities. Significant reductions in alpha diversity was detected for both bacterial (p=0.04) and staphylococcal (p=0.03) groin communities after arthroplasty surgery with significant reductions in relative Corynebacterium (p=0.001) abundance and S. hominis (p=0.01) relative staphylococcal abundance. In nares, significant reductions occurred for S. hominis (p=0.02), S. haemolyticus (p=0.02), and S. pasteuri (p=0.003) relative to other staphylococci. S. aureus colonised 35% of anterior nares before and 26% after arthroplasty surgery. S. epidermidis was the most abundant staphylococcal species at all sampling sites. No bacterial genus or staphylococcal species increased significantly after arthroplasty surgery. Application of a targeted tuf gene sequencing approach provided auxiliary staphylococcal community profiles and allowed species-level characterisation directly from low biomass clinical samples.

Metallic substrates and polymer adhesive in composite-metal joints have a relatively large coefficient of thermal expansion (CTE) mismatch, which is a barrier in the growing market of electric vehicles and their battery structures. It is reported that adding carbon nanotubes (CNTs) to the adhesive reduces the CTE of the CNT enhanced polymer adhesive multi-material system, therefore when used in adhesively bonded joints it would, theoretically, result in low CTE mismatch in the joint system. The current article presents the influence of two specific mass ratios of CNTs on the CTE of the enhanced polymer. It was observed that the addition of 1.0 wt% and 2.68 wt% of multi-walled CNTs (MWCNTs) decreased the CTE of the polymer adhesive from 7.5e-5 1/C (pristine level) to 5.87e-5 1/C and 4.43e-5 1/C, respectively by 22% and 41% reduction. The reduction in the CTE was predicted, theoretically, which showed that CTE should have been reduced to 3.6e-5 1/C (52% reduction) and 1.4e-5 1/C (81% reduction). This may be due to the fact that, Raman spectroscopy of the MWCNTs identified defects in the raw material, and scanning electron microscopy (SEM) identified agglomeration of MWCNTs on the surface and cross-section of the modified polymers.

Background: In 2014 the World Health Organization (WHO) warned of an emerging world-wide crisis of antibiotic resistant microorganisms. In response, government and professional organizations recommended that health care systems adopt antimicrobial stewardship programs (ASPs). In the United States, the Centers for Medicare Services (CMS) mandated antimicrobial stewardship in the hospital inpatient setting. Effective January 1, 2020, the Joint Commission required ambulatory centers that prescribe antibiotics, such as wound centers, to institute an ASP. Chronic wounds often remain open for months, during which time patients may receive multiple courses of antibiotics and numerous antimicrobial topical treatments. The wound clinician plays an integral role in reducing antimicrobial resistance in the outpatient setting: antibiotics prescribed for skin and soft tissue infections are among the most common in an outpatient setting. One of the most challenging aspects of antimicrobial stewardship in treating chronic wounds is the inaccuracy of bacterial and infection diagnosis. Methods: Joint Commission lists five elements of performance (EP): (1) Identifying an antimicrobial stewardship leader, (2) establishing an annual antimicrobial stewardship goal, (3) implementing evidence-based practice guidelines related to the antimicrobial stewardship goal, (4) providing clinical staff with educational resources related to the antimicrobial stewardship goal, and (5) collecting, analyzing, and reporting data related to the antimicrobial stewardship goal. This article focuses on choosing and implementing an evidence-based ASP goal for 2020. Discussion: Clinical trials have demonstrated the ability of fluorescence imaging (MLiX) to detect clinically significant levels of bacteria in chronic wounds. Combined with clinical examination of signs and symptoms of infection, the MLiX procedure improves the clinician’s ability to diagnose infection and can guide antimicrobial use. In order to satisfy the elements of performance, the MLiX procedure was incorporated into the annual ASP goal for several wound care centers. Clinicians were educated on the fluorescence imaging device and guidelines were instituted. Collection of antimicrobial utilization data is underway.

The aim of this study was to assess the best timing to perform arthrocentesis in the management of temporomandibular disorders with regards to conservative treatment. A systematic search based on PRISMA guidelines, including a computer search with specific keywords, reference list search, and manual search was done. Relevant articles were selected after 3 search rounds for final review based on 6 predefined inclusion criteria, followed by a round of critical appraisal. Eleven publications, including 5 randomized controlled trials and 6 prospective clinical studies informed this review. The studies were divided into 3 groups based on the timing of arthrocentesis: 1). Arthrocentesis as the initial treatment, 2). Early arthrocentesis, and 3). Late arthrocentesis. Meta-analyses compared the efficacy of improvement in mouth opening and pain reduction in the 3 groups. The results were statistically significant and favoured early arthrocentesis, followed by late arthrocentesis in terms of both improvements in mouth opening and pain reduction. All 3 groups showed improvement in mouth opening and pain reduction. We conclude that early arthrocentesis may be able to produce the best clinical results, while arthrocentesis before attempting conservative treatment may produce less favourable outcomes.

There is accumulating evidence that prenatal exposure to air pollution disturbs fetal growth and development, but little is known about these effects in cold climates or their season-specific or joint effects. Our objective was to assess independent and joint effects of prenatal exposure to specific air pollutants on the risk of low birth weight (LBW). We utilized the 2568 children of the Espoo Cohort Study, born between 1984 and 1990, and living in the City of Espoo. We conducted stratified analyses for births during warm and cold seasons separately. We analyzed the effect estimates using multi-pollutant Poisson regression models with risk ratio (RR) as the measure of effect. The risk of LBW was related to exposure to CO and (adjusted RR 1.44, 95% CI: 1.04-2.00) and exposure to O3 in the spring-summer season (1.82, 1.11-2.96). There was also evidence of synergistic effects between CO and O3 (relative risk due to interaction, RERI, all year 1.08, 95% CI: 0.27-4.94, spring-summer 3.97, 2.17-25.85) and PM2.5 and O3 (all year 0.72, -0.07-3.60, spring-summer 2.80, 1.36-19.88). We present new evidence of both independent and joint effects of prenatal exposure in a cold climate on the risk of LBW at low levels of air pollution.

Data integration has been proven to provide valuable information. The information extracted using data integration in the form of multiblock analysis can pinpoint both common and unique trends in the different blocks. When working with small multiblock datasets the number of possible integration methods is drastically reduced. To investigate the application of multiblock analysis in cases where one has few number of samples, we studied a small metabolomic multiblock dataset containing six blocks (i.e. tissue types), only including common metabolites. We used a single model multiblock analysis method called Joint and unique multiblock analysis (JUMBA) and compare it to a commonly used method, concatenated PCA. These methods were used to detect trends in the dataset and identify underlying factors responsible for metabolic variations. Using JUMBA, we were able to interpret the extracted components and link them to relevant biological properties. JUMBA shows how the observations are related to one another, the stability of these relationships and to what extent each of the blocks contribute to the components. These results indicate that multiblock methods can be useful even with a small number of samples.

Over the last three decades, special economic zones (SEZs) have given new impetus to the ever-growing export-oriented industrialization in developing countries. Where various economies have benefited from SEZs, many zones have ended up becoming enclaves with trifling advantage. The SEZs in Pakistan have experienced the same fate and failed to contribute to exports, employment and creating linkages with the domestic economy. Recently under China Pakistan Economic Corridor (CPEC), SEZs are proposed to be set up in Pakistan; with a hope to fuel the stuttering economy. However, it is pertinent to first understand the local context and device policies considering stakeholders' perspectives. This study aims to identify the factors for the successful implementation of SEZs derived from the regional context of Pakistan. In-depth interviews are conducted from most relevant stakeholders, who have been involved in the development of SEZs. The results pointed towards the removal of political influence over zones and government taking the lead role in deciding the types of industry to be invited in these zones. Each zone should have a clear vision of development based on its regional advantage. The zone promotions should be based on competitiveness rather than fiscal incentives. Joint ventures and PPP to be encouraged inside the zones for sustainable operations.

Joints between walls are very important for structural analysis of each masonry building at the global and local level. This issue was often neglected in case of traditional joints and relatively squat walls. Nowadays the issue of wall joints is becoming particularly important due to the continuous strive for simplifying structures, introducing new technologies and materials. Eurocode 6 and other standards (USA, Canadian, Chinese, and Japanese) recommend inspecting joints between walls, but no detail procedures have been specified. This paper presents our own tests on joints between walls made of autoclaved aerated concrete (AAC) masonry units. Tests included reference models composed of two wall panels joined perpendicularly with a masonry bond (6 models), traditional steel and modified connectors (12 models). A shape and size of test models and structure of a test stand were determined on the basis of the analysis of the current knowledge, pilot studies and numerical analyses of FEM. The analysis referred to the morphology and failure mechanism of models. Load-displacement relationships for different types of joints were compared and obtained results were referred to results for reference models. A mechanism of cracking and failure was found to vary, and clear differences in behaviour and load capacity of each type of joints were observed. Individual working phases of joints were determined and defined, and the empirical approach was suggested to determine forces and displacement of wall joints.

Subsurface temperature is the key parameter in geothermal exploration. An accurate estimation of the reservoir temperature is of high importance and usually done either by interpolation of borehole temperature measurement data or numerical modeling. However, temperature measurements at depths which are of interest for deep geothermal applications (usually deeper than 2 km) are generally sparse. A pure interpolation of such sparse data always involves large uncertainties and usually neglects knowledge of the 3D reservoir geometry or the rock and reservoir properties governing the heat transport. Classical numerical modeling approaches at regional scale usually only include conductive heat transport and do not reflect thermal anomalies along faults created by convective transport. These thermal anomalies however are usually the target of geothermal exploitation. Kriging with trend does allow including secondary data to improve the interpolation of the primary one. Using this approach temperature measurements of depths larger than 1,000 m of the federal state of Hessen/Germany have been interpolated in 3D. A 3D numerical conductive temperature model was used as secondary information. This way the interpolation result reflects thermal anomalies detected by direct temperature measurements as well as the geological structure. This results in a considerable quality increase of the subsurface temperature estimation.

This study aims to improve the shaft with hexagon joints to be a type not requiring welding or bolts in the static load test . In order to evaluate the bearing capacity of helical piles, two sites were selected to conduct pile installation for the field test and the pile load test. For the pile load test, the static pile load test and the dynamic pile load test were carried out, and torque was measured during pile installation for the field test to compare and analyze expected bearing capacity and thus assess the feasibility of the method for estimating the bearing capacity. The field pile load test revealed the bearing capacity of the gravity grout pile was the same or greater than 600kN in the static pile load test in accordance with AC 358 Code. The non-grout pile showed the bearing capacity the same or smaller than 600kN, suggesting gravity grouting is required. Moreover, the field pile load test was used to establish the bearing capacity equation considering the torque in pile installation, and a small number of samples were used to establish the equation which can be used as a basic data.

Joining of aluminium alloys to steels has been extensively studied, especially in the automotive sector. However, aluminium alloys are known to be difficult to join with steels when methods involving fusion welding are used because of hot cracking problem. Hence, a high strength joint between these dissimilar metals would be of benefit especially in reducing the weight of products. In this work the torch brazing method was applied to join AR500 steel with AA7075 aluminium alloy using Al-Si-Zn base filler metal at various flame times. The effect of the brazing work on the intermetallic phase formation and the mechanical strength of the joints were investigated. In this work, the maximum shear load obtained was 6460 N and the presence of the intermetallic phases had reduced the shear strength of the brazed joints. However, the torch brazing process using Al-Si-Zn filler metal had successfully facilitated the joining of these dissimilar metals.

Kinect is a device that has been widely used in many areas since it was released in 2010. Kinect SDK was announced in 2011 and used in many other areas than its original purpose, which was a controller for gaming. In particular, it has been used by a number of artists in digital media art since it is inexpensive and has a fast recognition rate. However, there is a problem. Kinect create 3D coordinates with a single 2D RGB image for x, y value - single depth image for z value. And this creates a significant limitation on the installation for interactivity of media art. Because the Cartesian XY coordinate and the spherical Z coordinate system are used in combination, depth error depending on the distance is generated, which makes real-time rotation recognition and coordinate correction difficult above coordinate system. This paper proposes a real-time calibration method of Kinect recognition range expansion for useful application in the digital media art area. The proposed method can recognize the viewer accurately by calibrating a coordinate in any direction in front of the viewer. 3,400 datasets witch acquire from experiment were measured as five stances: the 1m attention stance, 1m hands-up stance, 2m attention stance, 2m hands-up stance, and 2m hands-half-up stance, which were taken and recorded every 0.5 sec. The experimental results showed that the accuracy rate was improved about 11.5% compared with front measurement data according to Kinect reference installation method.

Compressive sensing originates in the field of signal processing and has recently become a topic of energy-efficient data gathering in wireless sensor networks. In this paper, we propose an energy efficient distributed compressive sensing solution for sensor networks. Proposed solution utilizes sparsity distribution of signals to group sensor nodes into several coalitions and then implements localized compressive sensing inside coalitions. This solution improves data-gathering performance in terms of both data accuracy and energy consumption. The approach curbs both data-transmission costs and number of measurements. Coalition-based data gathering cuts transmission cost, and the number of measurements is reduced by scheduling sensor nodes and adjusting their sampling frequency. Our simulation showed that our approach enhances network performance by minimizing energy cost and improving data accuracy.

Estimates of extreme water level return periods in river systems are crucial for hydraulic engineering design and planning. Recorded historical water level data of Taiwan’s rivers are not long enough for traditional frequency analyses when predicting extreme water levels for different return periods. In this study, the integration of a one-dimensional flash flood routing hydrodynamic model with the Monte Carlo simulation was developed to predict extreme water levels in the Danshuei River system of northern Taiwan. The numerical model was calibrated and verified with observed water levels using four typhoon events. The results indicated a reasonable agreement between the model simulation and observation data. Seven parameters, including the astronomical tide and surge height at the mouth of the Danshuei River and the river discharge at five gauge stations, were adopted to calculate the joint probability and generate stochastic scenarios via the Monte Carlo simulation. The validated hydrodynamic model driven by the stochastic scenarios was then used to simulate extreme water levels for further frequency analysis. The design water level was estimated using different probability distributions in the frequency analysis at five stations. The design high-water levels for a 200-year return period at Guandu Bridge, Taipei Bridge, Hsin-Hai Bridge, Da-Zhi Bridge, and Chung-Cheng Bridge were 2.90 m, 5.13 m, 6.38 m, 6.05 m, and 9.94 m, respectively. The estimated design water levels plus the freeboard are proposed and recommended for further engineering design and planning.

The objective of this research is to develop an experimental-theoretical analysis about the influence of the cooling medium and the geometry of the welding bead profile in fatigue life and associated parameters with structural integrity of welded joints. A welded joint with cruciform geometry is considered using SMAW, plates in structural steel ASTM A36 HR of 8 mm of thickness and E6013 electrode input. A three-dimensional computational model of the cruciform joint was created using the finite element method. For this model, the surface undulation of the cord and differentiation in the mechanical properties of the fusion zone were considered, the heat-affected zone (HAZ) and base material, respectively. In addition, an initial residual stress field which was established experimentally was considered. The results were a set of analytical expressions for the weld magnification factor Mk. It was found that values for the latter decrease markedly in function of the intensity of the cooling medium used in the post welding cooling phase, mainly due to the effect of the residual compressive stresses. The obtained models of behavior of the weld magnification factor are compared with the results from other researchers with some small differences, mainly due to the inclusion of the cooling effect of the post weld and the variation of the leg of the weld bead. The obtained analytical equations in the present research for Mk can be used in management models of life and structural integrity for this type of welded joint.

Strata and surface movement induced by mining under open-pit final slope is a huge threat to mine safety. Physical model test is an important method to study mining-induced strata and surface movement laws. Because of rock joints predominantly control rock mass deformation and failure, thus physical model test leaving out of consideration of rock joints is difficult to reflect the influence of rock joints on rock mass deformation. Therefore, this paper presents a three-dimensional physical model test considering simplified dominant rock joints. This test process includes the design of testing equipment, the construction of physical model with dominant rock joint sets, conduction of mining and deformation monitoring. And mining under eastern final slope of Yanqianshan iron mine was selected as a case to study the behavior of mining-induced strata and surface movement.

Terrestrial vegetation dynamics are closely influenced by a multitude of factors. This study investigated the relationships between vegetation patterns and their main influencing factors. The joint entropy method was employed to evaluate the dependence between normalized difference vegetation index (NDVI) and coupled variables in the middle reaches of Hei River basin. Based on the spatial distribution of mutual information, the whole study area was divided into five sub-regions. In each sub-region, nested statistical models were applied to model the NDVI on the grid and regional scales, respectively. Results showed that the annual average NDVI increased with a rate of 0.005/a in recent 11 years. In the desert regions, the NDVI increased significantly with an increase in precipitation and temperature, and high accuracy of retrieving NDVI model was obtained by coupling precipitation and temperature, especially in sub-region I. In the oasis regions, groundwater was also an important factor driving vegetation growth, and the rise of groundwater level contributed to the growth of vegetation. However, the relationship was weaker in artificial oasis regions (sub-region III and sub-region V) due to the influence of human activities, such as irrigation. The overall correlation coefficient between the observed NDVI and modeled NDVI was observed to be 0.97. Outcomes of this study are suitable for ecosystem monitoring, especially under the realm of climate change. Further studies are necessary and should consider more factors, such as runoff and irrigation.

Load transfer through orthopaedic joint implants is poorly understood. The longer-term outcomes of these implants are just starting to be studied, making it imperative to monitor contact loads across the entire joint implant interface to elucidate the force transmission and distribution mechanisms exhibited by these implants in service. This study proposes and demonstrates the design, implementation, and characterization of a 3D-printed smart polymer sensor array using conductive polyaniline (PANI) structures embedded within a polymeric parent phase. The piezoresistive characteristics of PANI were studied to characterize the sensing behaviours inherent to these embedded pressure sensor arrays. PANI's stable response to a continuous load, its stability throughout loading and unloading cycles, and its repeatable and linear response to incremental loading cycles together with the accuracy of these measurements were investigated. It is demonstrated that this specially developed multi-material additive manufacturing process for polyaniline is an attractive approach for the fabrication of implant components having embedded smart-polymer sensors for the measurement and analysis of joint loads in orthopaedic implants.

Previous study demonstrated the reconstituted type I collagen matrix extracted from rabbit tendons enabled to regenerate the TMJ disc in the rabbit. The aim of this study was to investigate changes in the extracellular matrix (ECM) and mechanisms of regeneration in TMJ disc. In 36 New Zealand rabbits that underwent a partial discectomy, discs were replaced with reconstituted collagen templates for 3 months. A histological analysis showed that moderate to severe degeneration appeared in partially discectomized joints without implantation. In contrast, discs that received the reconstituted collagen template regenerated, and returned to normal to protect the joint. Cells in the regenerative tissue expressed ECM, and fibers became regular and compact due to tissue remodeling over time. Reparative cells differentiated into chondroblasts, and showed highly dense pericellular fibers. The morphology and collagen composition of the disc and condyle in the 3-month experimental group were similar to those of normal tissues. In conclusion, the reconstituted collagen template facilitated the regeneration of surgically discectomized discs. Type I and type II collagens play a crucial role in the regeneration of articular discs.

In the current study, the failure behavior of retrofitted steel structures was studied experimentally and theoretically with steel/CFRP double strap joints (DSJs) under quasi-static tensile loading. A series of DSJs with different bonding lengths are also considered and examined to experimentally assess the effective bond length. To predict the failure load values of the tested specimens, a new stress-based criterion, namely the point stress (PS) criterion is proposed. Although some theoretical predictive modelling for the strength between steel/CFRP joints under various loading conditions has been presented, in this work by using the new proposed approach, one can calculate rapidly and conveniently the failure loads of the steel/CFRP specimens. Furthermore, to assess the validity of the new proposed criterion, further experimental data on steel/CFRP DSJs available in the open literature are predicted using the PS criterion. Finally, it was found that a good agreement exists between the experimental results and the theoretical predictions based on the PS criterion.

The Estimation of systemic risk in India is still in its infancy stage. There are several methods which are available but none of the methods are fully compatible to forecast the systemic risk since under different circumstances the factors responsible for the risk differs. In this paper the systemic risk estimation in India being carried out based on spread in daily stock market price(Difference between the bid and ask price of a share) of the top 100 firms in India according to market capitalization for the period of July2007 to March 2016. The results were compared with the Financial Stability Report published by Reserve Bank Of India for the period of March 2010 to June 2016.The results clearly indicates that there exits relationship between market illiquidity represented by spread and risks associated with the Financial System. In most of the cases the Z score (deviation from the mean/Standard Deviation) of the spread has become negative which provides the spread which is farther from the mean, also a good indicator of volatility in market and risk to financial system. It is also seen that the Systemic Risk Survey conducted by Reserve Bank of India which started during October 2011 has supported the results.

We show the tensor properties of joint probabilities on a Riemannian parametric manifold. Initially we develop a binary data matrix for parameter measurements of a large number of particles confining in a closed system in order to retrieve the joint probability densities of related parameters. By introducing a new generalized inner product as a multilinear operation on dual basis of parametric space, we extract the set of joint probabilities and prove them to meet contravariant tensor properties in a general Riemannian parametric space. We show these contravariant tensors reduce to classical ordinary partial derivatives definition in ordinary Euclidean parametric space. Finally we prove by a theorem that symmetrized iterative contravariant derivative of cumulative probability function on Riemannian manifold gives the set of joint probabilities in those manifold. We bring some examples for compatibility with physical tensors.

In this paper, a method is developed for presenting a novel virtual torque sensor based on precise model and position measurements avoids the need of traditional strain gauges and amplifiers. More specifically, the harmonic drive compliance model and the Gaussian process regression (GPR) technique are used together to achieve virtual torque sensor measurement. While the harmonic drive compliance model provides the analytic part, the Gaussian process regression method is used to reconstruct the unmolded part based on motor-side and link-side joint angles as well as motor current. After an automatic offline calibration, the method allows for a lean online implementation. The virtual torque sensor measurement is compared with measurements of a commercial torque sensor, and the results have attested the effectiveness of the proposed method.

The way people innovate and create new ideas and bring them to the market is undergoing a fundamental change from closed innovation to open innovation. Why and how do firms perform open innovation? Firms’ open innovation is measured through the levels of firms’ joint patent applications. Next, we analyze network structures and characters of firms’ joint patent applications such as betweenness and degree centrality, structure hole, and closure. From this research, we drew conclusions as follows. First, the structure of collaboration networks has both direct and indirect effects on firms’ innovative performance. Second, in the process of joint patent applications, there is a long tail phenomenon in networks of joint patent applications. Third, the number of patents and International Patent Classification (IPC) subclasses together constitute a meaningful measure of the innovation performance of firms.