The low water solubility of any pharmacoactive molecules limits their pharmacological potential but the solubility parameter cannot compromise, so different approaches are employed to enhance their bioavailability. Pharmaceutically active molecules with low solubility convey a higher risk of failure for drug innovation and development. Pharmacokinetics, pharmacodynamics, and several other parameters, such as drug distribution, protein binding and absorption, are majorly affected by their solubility. Among all pharmaceutical dosage forms, the oral dosage forms cover more than 50 %, and the drug molecule should be water-soluble. For good therapeutic activity by the drug molecule on the target site, solubility and bioavailability are crucial factors. The pharmaceutical industry screening programs identified that around 40% of new chemical entities (N.C.E.s) face various difficulties at the formulation and development step. These pharmaceuticals are attributed to their less solubility and bioavailability. The bioavailability and drug solubility enhancement are significant challenges in the area of pharmaceutical formulations. According to the Classification of Biopharmaceutics, Class II and IV drugs (APIs) exhibits poor solubility, lower bioavailability, and less dissolution. Various technologies are discussed in this article to improve the solubility of the poorly water-soluble drug, for example, complexation of active molecules, utilization of emulsion formation, micelles, microemulsions, cosolvents, polymeric micelles preparation, particle size reduction technologies, pharmaceutical salts, prodrugs, solid-state alternation technique, soft gel technology, drug nanocrystals, solid dispersion methods, crystal engineering techniques and nanomorph technology. This review mainly describes several other advanced methodologies for solubility and bioavailability enhancement, such as crystal engineering, micronization, solid dispersions, nano sizing, use of cyclodextrins, solid lipid nanoparticles, colloidal drug delivery systems and drug conjugates, by some appropriate research reports.

Polymeric hydrogels are promising polymeric functional materials that have been widely used in the biomedical field as an emerging carrier of various therapeutic agents. Polymeric hydrogels as a carrier of therapeutics can leverage therapeutically beneficial outcomes of drug delivery than systemic chemotherapy and can provide spatial and temporal control over the release of various therapeutic agents. Polymeric hydrogels are cross-linked three-dimensional networks constructed by hydrophilic polymers and they are capable of absorbing and re-taining a large amount of water. Polymeric hydrogels share many physiochemical features with natural tissues due to their water abundance, biomimetic microstructure, and intrinsic flexibility. Polymeric hydrogels have excellent biocompatibility, biodegradability, and lower toxicity. Polymeric hydrogels enhance the convenience and efficiency of drug delivery by assisting in situ gelation and controlling drug release by changing their volume and other properties when it encounters some stimuli (e.g., heat, pH, light, and ultrasound). This review aims to outline the overview of polymeric hydrogels, properties, types, advantage, disadvantages, characteri-zation, and their application with present status and future perspective used for the delivery of therapeutics in pharmaceutical and biomedical sciences.

Due to the ever increasing global warming, the scientific community is concerned with finding immediate solutions to reduce or utilize carbon dioxide (CO2) and convert it in useful compounds. In this context, the reductive process of CO2 methanation is well investigated and attractive due to its simplicity. However, it requires the development of highly active catalysts. In this mini-review, the focus is on biochar-immobilized nanocatalysts for CO2 methanation. We summarize the recent literature on the topic, reporting strategies for the design of biochar with immobilized nanocatalysts and their performances in CO2 methanation. We review the thermochemical transformation of biomass into biochar and its decoration with CO2 methanation catalysts. We also tackle direct methods of obtaining biochar-nanocatalysts, in one pot, from nanocatalyst precursor-impregnated biomass. We review the effect of the initial biomass nature, as well as the conditions that permit to tune the perfomances of the composite catalysts. Finally, we discuss the CO2 methanation performances and how they could be improved keeping in mind low operation cost and particularly sustainability.

Low carbon supply chain management (LCSCM) strategies are required in the Indian manufacturing industries due to rapidly growing energy usage for financial and environmental concerns. LCSCM technologies face a number of challenges that limit their adoption. Eleven hurdles were selected from the literature as well as the recommendations of business and academic experts. These barriers are defined by a number of factors, including a lack of information, financial worries, environmental concerns, and governmental limits, among others. In addition, efforts are being made to quantify the most optimal relevant barriers using Multi criteria decision making (MCDM) techniques such as interpretive structural modeling (ISM) and decision-making trail and evaluation laboratory (DEMATEL). MICMAC analysis is used to estimate the sensitivity and priority of barriers based on dependency power and driving power. One of these barriers is a needed factor; three are driving elements; four barriers are linked factors; and three are self-sufficient factors. The findings of this study can help academic specialists, industry representatives, and practitioners in their ongoing attempts to adopt 'LCSCM techniques' in Indian manufacturing industries. The model is appropriately explained and applies the link between the barriers.The objective of this paper is the Evaluation and selection of most influential of Barriers to Adopt Low Carbon Supply Chain Management (LCSCM) in the Indian Manufacturing Sector is interrelated.

The Metropolitan Economic Freedom Index (MEFI) ranks cities based on their support of free market enterprise. In its current state, MEFI purports to measure three constructs (government spending, taxation, and labor market freedom) with three equally weighted variables for each one, assuming perfect substitutability of variables. This study investigates the statistical consistency of MEFI through Confirmatory Factor Analysis. Multiple models investigate current variable selection by providing a potentially better indicator of labor market freedom, aggregation assumptions by removing the requirements for fixed and equal weights, and statistical consistency by evaluating the fit between the data and models. Results indicate that the current MEFI model is not statistically consistent with the data, that weighting of variables should not be equal, that variable selection should be investigated, and that constructs should be re-imagined. The models investigated provide an initial starting point for redefining MEFI.

Ubiquitous computing comprises scenarios where networks, devices within the network, and software components change frequently. Market demand and cost-effectiveness are forcing device manufacturers to introduce new-age devices. Also, the Internet of Things (IoT) is transitioning rapidly from the IoT to the Internet of Everything (IoE). Due to this enormous scale, effective management of these devices becomes vital to support trustworthy and high-quality applications. One of the key challenges of IoT device management is automatic device classification with the logically semantic type and using that as a parameter for device context management. This would enable smart security solutions. In this paper, a device classification approach is proposed for the context management of ubiquitous devices based on unsupervised machine learning. To classify unknown devices and to label them logically, a proactive device classification model is framed using a k-Means clustering algorithm. To group devices, it uses the information of network parameters such as Received Signal Strength Indicator (rssi), packet_size, number_of_nodes in the network, throughput, etc. Experimental analysis suggests that the well-formedness of clusters can be used to derive cluster labels as a logically semantic device type which would be a context for resource management and authorization of resources. This paper fulfills an identified need of proactive device classification for device management.

In the recent years, biochar has emerged as a remarkable biosourced material for addressing global environmental, agricultural, biomedical, and energy challenges. However, the performances of biochar rest in part on finely tuning its surface chemical properties, intended to obtain specific functionalities. In this review, we tackle surface treatment of biochar with silane and other coupling agents such as diazonium salts, titatantes, ionic/non-ionic surfactants, as well as nitrogen-containing (macro)molecules. We summarize the recent progress achieved mostly in the last five years, and correlate the nature and extent of functionalization to eye catchy end applications of the surface engineered biochar.

In the present paper, we introduced a quadratically convergent Newton’s like normal S2 iteration method free from the second derivative for the solution of nonlinear equations permitting 3 f'(x) = 0 at some points in the neighborhood of the root. Our proposed method works well 4 when the Newton method fails. Numerically it has been verified that the Newton’s like normal 5 S-iteration method converges faster than Fang et al. method [A cubically convergent Newton-type 6 method under weak conditions, J. Compute. and Appl. Math., 220 (2008), 409-412]. We studied 7 different aspects of normal S-iteration method. Lastly, fractal patterns support the numerical 8 results and explain the convergence, divergence, and stability of method.

In this paper, we study a co-variational inequality problem involving Yosida approximation operators in real uniformly smooth Banach space and define an iterative method to obtain its solution. We prove some properties of Yosida approximation operator for our purpose, that is strongly accretivity and Lipschitz continuity. An existence as well as convergence result is proved for co-variational inequality problem involving Yosida approximation operators using the concept of nonexpansive sunny retraction.

Now-a-days, the thrust area of materials’ research is to develop multifunctional materials, which have multiple properties in a single functional material. We are interested to develop multifunctional polysilanes having special functional properties such as optical activity and photoluminescence (PL) properties. In this investigation, poly(methyl phenyl silane) (PMPS) was integrated with a chiral unit and a photoactive unit by in situ photopolymerization of (R)-N-(1-phenyl ethyl) methacrylamide (R-NPEMAM) and disperse red 1 methacrylate (DR1MA) monomer in the presence of PMPS. PMPS acted as a macrophotoinitiator and by UV exposure it produced macroradicals which initiated polymerization of chiral and photoactive monomers. Thus a block copolymer of PMPS-b-(R-NPEMAM-ran-DR1MA) was synthesized.The synthesized multifunctional organic inorganic hybrid polymer samples were characterized by FTIR and NMR spectroscopy. The molecular weights of the samples were measured by GPC analysis. The optical, chiroptical and photoluminescence properties were studied. The narrow band at about 1638 cm^-1 is due to C=O stretching vibration of -CONH- of the chiral unit. A wide absorption peaks at 3444 cm^-1 is the characteristic of NH trans stretching vibration of secondary amide group. The asymmetric stretching of NO₂ group appeared at 1481 cm^-1 and the characteristic peak at 1427 cm^-1 was observed due to azo (-N=N-) group stretching of DR1MA unit. The Si-Si band of PMPS appeared at about 462 cm^-1 in FTIR spectra. The optical absorbance observed at 272 nm is due to π-π* transition of aromatic ring and at 330 nm corresponds to σ-σ* transition of Si-Si bond. The other electronic absorption observed in the visible region at 475 nm corresponds to the combined contribution of n-π* and π-π* transition of DR1MA unit. The photoluminescence properties of such polymers were studied for the variation of concentration of the polymer solution and variation with excitation energy such as 275 nm, 325 nm and 475 nm in THF solvent. Such synthesized multifunctional photoactive organic-inorganic polymers having unusual optical, chiroptical and photoluminescence property may find novel optoelectronic (friend foe identification and secretive code identification) applications.

Crop domestication and breeding considerably increased productivity over centuries, but simultaneously involved unconscious selection against ‘selfish plant behavior’. Paradoxically, modern-day crop breeding largely enhances individual plant-fitness. As agriculture relies on community performance, embracing an “Agroecological Genetics and Genomics” viewpoint might maximize communal yield by matching crop genotypes to target environments.

Clairton, Pennsylvania, is home to the largest coke works facility in the United States (US). On 24 December 2018, a large fire occurred at this facility and damaged pollution control equipment. Although repairs were not completed for several months, production continued at pre-fire capacity and daily emissions increased by 24 to 35 times, with multiple exceedances of monitored levels of outdoor air pollution (OAP). The aim of this study was to objectively evaluate the impact of this industrial incident and resultant OAP exceedances on asthma morbidity. We assessed pre-fire and post-fire rate ratios (RR) of outpatient and emergency department (ED) visits for asthma exacerbations among nearby adult residents. Pre-fire versus post-fire RRs increased for both visit types: RR = 1.82 (95% CI: 1.30, 2.53; p < 0.001) and 1.84 (95% CI: 1.05, 3.22; p = 0.032) for outpatient and ED visits, respectively. Additionally, total visit rates increased on days with OAP exceedances: RR = 2.47 (95% CI: 1.52, 4.01; p < 0.0001), 1.58 (95% CI: 1.00, 2.48; p = 0.048) and 1.79 (95% CI: 1.27, 2.54; p = 0.001) for PM_2.5, SO₂, and H₂S exceedance days, respectively. These results show a near doubling of acute visits for asthma exacerbations in nearby adult residents during this industrial incident and underscore the need for prompt remediation and public notification of OAP exceedances to prevent adverse health impacts.

OBJECTIVE: Recent worldwide outbreak of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the causative agent of respiratory coronavirus disease 2019 (COVID-19), is a current, ongoing life-threatening crisis and international public health emergency. The early diagnosis and management of the disease remains a major challenge. In this review, we aim to summarize the updated epidemiology, causes, clinical manifestation and diagnosis, as well as prevention and control of the novel coronavirus SARS-CoV-2.MATERIALS AND METHODS: A broad search of the literature was performed in “PubMed” “Medline” “Web of knowledge”, and “Google Scholar” World Health Organization-WHO” using the keywords “severe acute respiratory syndrome coronavirus”, “2019-nCoV”, “COVID-19, “SARS”, “SARS-CoV-2” “Epidemiology” “Transmission” “Pathogenesis” “Clinical Characteristics”. We reviewed and documented the information obtained from literature on epidemiology, pathogenesis and clinical appearances of SARS-CoV-2 infection.RESULTS: The global cases of COVID-19 as of April 2, 2020 have risen to more than 900,000 and morbidity has reached more than 47,000. The incidence rate for COVID-19 has been predicted to be higher than the previous outbreaks of other coronavirus family members, including those of SARS-CoV and the Middle East Respiratory Syndrome Coronavirus (MERS-CoV). The main clinical presentation of SARS-CoV-2 infection ranges from asymptomatic stages to severe lower respiratory infection in the form of pneumonia. Most of the patients also presented with fever, cough, sore throat, headache, fatigue, myalgia and breathlessness.Individuals at higher risk for severe illness include elderly people and patients with a weakened immune system or that are suffering from a underlying chronic medical condition like hypertension, diabetes, cancer, respiratory illness or cardiovascular diseases.CONCLUSIONS: SARS-Cov-2 has emerged as a worldwide threat, currently affecting 170 countries and territories across the globe. There is still much to be understood regarding SARS-CoV-2 about its virology, epidemiology and clinical management strategies; this knowledge will be essential to both manage the current pandemic and to conceive comprehensive measures to prevent such outbreaks in the future.

Mosquitoes have distinct developmental and adult life history, and the vectorial capacity of females has been shown to be affected by the larval nutritional environment. However, little is known about the effect of developmental nutrition on insulin-signaling and nutrients storage. In this study, we used Aedes aegypti, the yellow fever mosquito, to determine whether larval nutrition affects insulin gene expression. We also determined the traits regulated by insulin signaling, such as stored-nutrients levels and fecundity. We raised mosquito larvae on two different diets, containing either high protein or high carbohydrates. Development on a high-carbohydrate diet resulted in several life-history phenotypes indicative of suboptimal conditions, including increased developmental time and decreased fecundity. Additionally, our data showed that insulin transcript levels are affected by a high-carbohydrate diet during development. Females, not males, reared on high-carbohydrate diets had much higher transcript levels of insulin-like peptide 3 (ILP3), a mosquito equivalent of human insulin, and these females more readily stored sugar from the meal into lipids. We also found that AaILP4, not AaILP3, transcript levels were much higher in the males after a sugar meal, suggesting sex-specific differences in insulin-signaling pathway. Our findings suggest a conserved mechanism of carbohydrate-mediated hyperinsulinemia in animals.

Ixodes scapularis is the major vector of Lyme disease in the eastern United States. Each active life stage (larva, nymph, and adult) takes a blood meal either for developing and molting to the next stage (larvae and nymphs) or for oviposition (adult females). This protein-rich blood meal is the only food taken by Ixodes ticks and therefore blood digestion is very important for tick survival. Most studies on blood digestion in ticks have shown that the initial stages of digestion are carried out by cathepsin proteases within acidic digestive cells. However, most of these studies have focused on partially engorged ticks. In other hematophagous arthropods, the serine proteases play an important role in blood protein degradation. In this study, we determined transcript expression of four I. scapularis serine proteases with previously characterized roles in blood digestion. RNA interference was used for functional analysis and a trypsin-benzoyl-D, L-arginine 4-nitoanilide assay was used to measure active trypsin levels. An in vitro hemoglobinolytic assay was performed with or without serine protease inhibitor. Our data suggest that trypsin levels increase significantly after blood feeding and peaked in larvae, nymphs, and adults at 3, 1, and 1 day post host detachment, respectively. The knockdown of three previously identified serine proteases by RNAi negatively impacted blood intake, survival, fecundity, levels of active trypsin in the gut and resulted in lower hemoglobin degradation in vitro. A trypsin inhibitor, PMSF, blocked the action of trypsin in the gut extract resulting in 65% lower hemoglobin degradation. We provide evidence of the serine proteases as digestive enzymes in fully engorged, replete females. Our data also demonstrated that in addition to blood digestion, these serine proteases might have a role in blood feeding success in I. scapularis.

Cancer is a catchall term that refers to a collection of more than one chronic disease that can adversely affect the body, including the organs of the body. These diseases can be grouped together under the umbrella term "cancer." Cancer is a catch-all term that is used to refer to a number of different diseases. During the process of looking for new chemical entities, it was found that certain compounds with a basic nucleus of benzoic acid (BA) exhibit a remarkable anticancer potential. This was discovered while the researchers were looking for new chemical entities. In the sixteenth century, the aromatic chemical known as BA, which is also known as an aromatic carboxylic acid, was discovered. BA is also referred to as an aromatic carboxylic acid. When it comes to the chemical synthesis of a wide range of different active molecules, the utilization of a sizeable quantity of BA as a raw material is absolutely necessary. In addition to being present in a variety of other naturally occurring compounds, the BA moiety is the component that is responsible for the activity of the naturally occurring compounds vanillin, gallic acid, and syringic acid. In the synthesis of a wide variety of synthetic bioactive molecules, the BA scaffold is utilized as a building block. The drugs furosemide, bumetanide, benzocaine, tetracaine, and bexarotene are all examples of molecules that fall into this category. The scope of this review article allows for the discussion of a number of noteworthy and recent achievements of BA derivatives in terms of their effectiveness against cancer.

Video capsule endoscopy (VCE) is increasingly used to decrease the discomfort among patients owing to its small size. However, VCE has a major drawback of not having narrow band imaging (NBI) functionality. The current VCE has the traditional white light imaging (WLI) only, which has poor performance in the computer-aided detection (CAD) of different types of cancer compared with NBI. Specific cancers, such as esophageal cancer (EC), do not exhibit any early biomarkers, making their early detection difficult. In most cases, the symptoms are unnoticeable, and EC is diagnosed only in later stages, making its 5-year survival rate below 20% on an average. NBI filters provide particular wavelengths that increase the contrast and enhance certain features of the mucosa, thereby enabling early identification of EC. However, VCE does not have a slot for NBI functionality because its size cannot be increased. Hence, NBI image conversion from WLI can be achieved only in post-processing at present. In this study, a complete arithmetic assessment of the decorrelated color space was conducted to generate NBI images from WLI images for VCE of the esophagus. Three parameters, namely, structural similarity index metric (SSIM), entropy, and peak-signal-to-noise ratio (PSNR), were used to asses the simulated NBI images. Results show the good performance of the NBI image reproduction method, with SSIM, entropy difference, and PSNR values of 93.215%, 4.360, and 28.064 dB, respectively.

It has been suggested that particle size plays an important role in determining the genotoxicity of gold nanoparticles (GNPs). The purpose of this study was to compare the potential radio-sensitization effects of two different sized GNPs (3.9 and 37.4 nm) fabricated and examined in vitro in Lewis Lung carcinoma (LLC) as a model of non-small cell lung cancer through use of comet and clonogenic assays. After the treatment of 2Gy X-ray irradiation, both particle sizes demonstrated increased DNA damage when compared to treatment with particles only and radiation alone. This radio-sensitization was further translated into a reduction in cell survival demonstrated by clonogenicity. This work indicates that GNPs of both sizes induce DNA damage in LLC cells at the tested concentrations, whereas the 37.4 nm particle size treatment group demonstrated greater significance in vitro. The presented data aids in the evaluation of the radiobiological response of Lewis Lung carcinoma cells treated with gold nanoparticles.

Abstract: In order to accelerate deployment of distributed recycling by providing low-cost feed stocks of granulated post-consumer waste plastic, this study analyzes an open source waste plastic granulator system. It is designed, built and tested for its ability to convert post-consumer waste, 3-D printed products and waste into polymer feedstock for recyclebots of fused particle/granule printers. The technical specifications of the device are quantified in terms of power consumption (380 to 404W for PET and PLA, respectively) and particle size distribution. The open source device can be fabricated for less than USD$2000 in materials. The experimentally-measured power use is only a minor contribution to the overall embodied energy of distributed recycling of waste plastic. The resultant plastic particle size distributions were found to be appropriate for use in both recyclebots and direct material extrusion 3-D printers. Simple retrofits are shown to reduce sound levels during operation by 4dB-5dB for the vacuum. These results indicate that the open source waste plastic granulator is an appropriate technology for community, library, makespace, fab lab or small business-based distributed recycling.

Objectives: To explore the potential of Radiomics alone and in combination with diffusion-weighted derived quantitative parameter namely apparent diffusion co-efficient (ADC) using supervised classification algorithms in predicting outcomes and prognosis. Materials and Methods: Retrospective evaluation of the imaging was done for a study cohort of uterine cervical cancer, candidates for radical treatment with chemo radiation. ADC values were calculated from the darkest part of the tumor, both before (labeled preADC) and post treatment (labeled postADC) with chemo radiation. Post extraction of 851 Radiomics features and feature selection by taking the union of the features which had Pearson correlation >0.35 for recurrence, >0.49 for lymph node and >0.40 for metastasis, analysis was done to predict clinical outcomes. Results: The study enrolled 52 patients who presented with variable FIGO stages and age range 28–79 (Median = 53 years) with median follow-up of 26.5 months (range, 7–76 months). Disease recurrence occurred in 12 patients (23%). Metastasis occurred in 15 patients (28%). A model generated with 24 radiomics features and preADC using a monotone multi-layer perceptron neural network to predict the recurrence yields AUC of 0.80 and kappa value as 0.55 and shows that addition of radiomics features on ADC values improves the statistical metrics by 40% approximately for AUC and 223% approximately for Kappa. Similarly, neural network model for prediction of metastasis re-turns AUC of 0.84 and kappa value as 0.65 over performs by 25% for AUC and 140% for Kappa approximately. There was a significant input of GLSZM features (SALGLE and LGLZE) and GLDM features (SDLGLE and DE) correlation with clinical outcomes of recurrence and metastasis. Conclusions: The study is an effort to bridge the unmet need of translational predictive biomarkers in stratification of uterine cervical cancer patients based on prognosis.

The synthesis of the presented benzo[d]thiazol-2-amine derivatives was performed by condensing-(4-chlorobenzylidene) benzo[d]thiazol-2-amine with a number of substituted phenols in the presence of potassium iodide and anhydrous potassium carbonate in dry acetone. IR spectroscopy, 1HNMRspectroscopy and spectroscopy methods were used to characterize the structural properties of newly synthesized derivatives. In order to observe the attributes of drug-like candidates of these derivatives, the number of their molecular properties was estimated. Benzo[d]thiazol-2-amine derivatives were molecularly docked with selective enzymes COX-1 and COX-2. Findings suggested that Compounds G3, G4, G6, G8 and G11 possess higher binding affinity than diclofenac sodium, when docking was performed with enzyme COX-1. Compounds G1, G3, G6, G8and G10 showed lower binding affinity than Indomethacin when docking performed with enzyme COX-2.In vitro evaluation of the COX-1 and COX-2 enzyme inhibitory activities were performed for synthesized compounds. Compounds 10 and 11 exhibited significant COX-1 and COX- enzyme inhibitory action with IC50 values of 5.0 and 10 µM, respectively. Using the hot plate method and the carrageenan-induced rat paw edema model, the synthesized compounds were screened for their biological activities, including analgesic and anti-inflammatory activities. The highest analgesic action was exhibited by derivative G11and the compound G10 showed the highest anti-inflammatory response.

Biochar is a carbon allotrope obtained by pyrolysis of biomass, usually agro-waste. Owing to the demand for sustainable development, biochar is continuously raising much hope in the scientific community. However, in order to impart it with new properties, its modification is required, either in situ during pyrolysis, or after the carbonization process. Herein, we propose a new direct approach to obtain bimetallic copper/nickel nanoparticle-loaded on olive stone biochar. The bimetallic-coated biochar and the reference materials bare biochar, copper-loaded and nickel-loaded biochar were prepared at 400 °C under a stream of dinitrogen from olive pit powder particles impregnated first with citric acid (CA), and then with copper and nickel nitrates. We have employed citric acid in the process in order to check its effect on the structural and textural properties of biochar supporting the metallic nanoparticles. Surprisingly, citric acid induced the formation of agglomerated or even raspberry-shaped, bimetallic copper/nickel nanoparticles. Large 450-500 nm-sized agglomerates of ~80 nm bimetallic CuNi NPs were noted for B-CA@CuNi. Interestingly, for biochar material prepared with initial Cu/Ni=10 molar ratio (B-CA@CuNi10/1), the bimetallic NPs formed unusual nano-raspberries (1748 nm in size) which are agglomerates of individual 10-20 nm-sized CuNi10/1 nanoparticles. The B-CA@CuNi and reference materials were characterized by Raman spectroscopy, scanning electron microscopy (SEM)/energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD) and magnetometry. The B-CA@CuNi and B-CA@Ni materials could be attracted efficiently with a magnet, but not B-CA@CuNi10/1 due to a low nickel loading. B-CA@CuNi was tested as a catalyst for the degradation of methyl orange (MO). Discoloration was noted within 10 min, much faster than a similar material prepared in the absence of CA. B-CA@CuNi could be recycled at least 3 times with exhibit as fast discoloration catalysis performance. This paper stresses the important role of citric acid in shaping the bimetallic nanoparticles loaded in situ on biochar during the slow pyrolysis process and to enable faster catalysed discoloration of organic dye solution.

Sonoran felids are threatened by drought and habitat fragmentation. Vector range expansion and anthropogenic factors such as habitat encroachment and climate change are altering viral evolutionary dynamics and exposure. However, little is known about the diversity of viruses present in these populations. Small felid populations with lower genetic diversity are likely to be most threatened with extinction by emerging diseases, as with other selective pressures, due to having less adaptive potential. We used a metagenomic approach to identify novel circoviruses, which may have a negative impact on the population viability, from confirmed bobcat (Lynx rufus) and puma (Puma concolor) scats collected in Sonora, Mexico. Given some circoviruses are known to cause disease in their hosts, such as porcine and avian circoviruses, we took a non-invasive approach using scat to identify circoviruses in free-roaming bobcats and puma. Three circovirus genomes were determined, and, based on the current species demarcation, they represent two novel species. Phylogenetic analyses reveal that one circovirus species is more closely related to rodent associated circoviruses and the other to bat associated circoviruses, sharing the highest genome-wide pairwise identity of approximately 70% and 63%, respectively. At this time, it is unknown whether these scat-derived circoviruses infect felids, their prey, or another organism that might have had contact with the scat in the environment. Further studies should be conducted to elucidate the host of these viruses and assess health impacts in felids.

Biobanks linked to electronic health records provide a rich data resource for health-related research. With the establishment of large-scale infrastructure, the availability and utility of data from biobanks has dramatically increased over time. As more researchers become interested in using biobank data to explore a diverse spectrum of scientific questions, resources guiding the data access, design, and analysis of biobank-based studies will be crucial. The first aim of this review is to characterize the types of biobanks that are discussed in the recent literature and provide detailed descriptions of specific biobanks including their location, size, data access, data linkages and more. The development and accessibility of large-scale biorepositories provide the opportunity to accelerate agnostic searches, new discoveries, and hypothesis-generating studies of disease-treatment, disease-exposure and disease-gene associations. Rather than spending time and money designing and implementing a single study with pre-defined objectives, researchers can use biobanks’ existing data-rich resources to answer scientific questions as quickly as they can analyze them. While the data are becoming increasingly available, additional thought is needed to address issues related to the design of such studies and analysis of these data. In the second aim of this review, we discuss statistical issues related to biobank research in general including study design, sampling strategy, phenotype identification, and missing data. These issues are illustrated using data from the Michigan Genomics Initiative, UK Biobank, and Genes for Good. We summarize the current body of statistical literature aimed at addressing some of these challenges and discuss some of the standing open problems in this area. This work serves to complement and extend recent reviews about biobank-based research and aims to provide a resource catalog with statistical and practical guidance to researchers pursuing biobank-based research.

In a limestone quarry mine, fragmentation is a crucial outcome of blasting operations. The optimization of blasting operations greatly benefits from the prediction of rock fragmentation. The main factors that affect fragmentation are rock mass characteristics, blast geometry, and explosive properties. This paper is a step towards the implementation of machine learning and deep learning algorithms for predicting the extent of fragmentation (in percentage) in opencast mining. Various parameters can affect fragmentation. But, in this paper initially, ten parameters (spacing, drill hole diameter, burden, average bench height, powder factor, number of holes, charge per delay, uniaxial compressive strength, specific drilling, and stemming) are collected to train the model. However, due to a weak correlation with rock fragmentation, drill diameter, Average bench height, compressive strength, stemming, and charge per delay are eliminated to reduce model complexity. A total of 219 data sets having five input features i.e., the number of holes, spacing, burden, specific drilling, and powder factor are used to develop the models. To predict rock fragmentation due to blasting in limestone quarry mines, both machine learning models (Random Forest Regression (Bagging), Support Vector Regression, and XG Boost Regression (Boosting)), as well as a deep learning model (Neural Network Regression), are applied to develop a model that can optimize the prediction of fragmentation. The Artificial neural network model optimization showed that the model with architecture 64-32-16-1 can perform well giving MSE (mean squared error) values of 41.32 and 28.59 on training and test data respectively. The R2 value for both training and test is 0.83. Random Forest regression is also performing well compared to SVR and XG boost with the MSE value 12.37 and 9.89 on training and testing data respectively. Here, the R2 value for both sets are 94%. Based on the permutation importance and Shapely plot values, the powder factor has the highest impact, and the burden has the lowest impact on fragmentation.

Cinnamomum tamala leaf (CTL), also known as tejpat and Indian bay leaf, is used all over the world for seasoning, flavouring, and medicinal purposes. Numerous researchers are interested in exploring the nutritional and medicinal benefits of CTL due to their potential as nutraceuticals. These characteristics could be explained by the presence of several essential bioactive substances and lipid derivatives. There are no reports available on this species about its metabolites profile. In this work, rapid screen and identify chemical compounds in supercritical (SC)-CO2 extracts of CTL by use of UPLC-Q-TOF-MSE with multivariate statistical analysis approach was established in both negative and positive mode. As a results, a total of 166 compounds, including 66 monocarboxylic fatty acids, 52 dicarboxylic fatty acids, 27 fatty acid amides, and 21 others were tentatively identified based on accurate mass, and the mass spectrometric fragmentation pattern, out of which 142 compounds are common and found in all five CTL extracts. They displayed robust [M+H]+ and/or [M-H]- ions in both low- and high-energy collision-induced dissociations (CIDs). Based on chemical profiling and chemometric analysis, CTL4 (300bar/55°C) extract was found significantly more potent in other CTL’s extracts. A new mono- and di-carboxylic fatty acids, fatty acid amides and other essential bioactive compounds were separated within 20 min runtime and identified in CTL for the first time. The combination of UPLC-Q-TOF-MSE and chemometric analysis is a powerful method to rapidly screen the metabolites profile for the quality control of C. tamala leaf.

Multiple Gateways (GWs) provide network connectivity to Internet of Things (IoT) sensors in a Wide Area Network (WAN). The End Nodes (ENs) can connect to any GW by discovering and acquiring its periodic beacons. This provides GW diversity and hence improves coverage. If the GWs are within vicinity to each other, and they keep sending periodic beacons to be discovered, the result is interference and collisions. In this study, the impact of such intra-network interference is analyzed to determine the maximum number of GWs that can co-exist within a given urban neighborhood. The paper shows the relationship between beacon collisions and the resulting packet loss rates in a given urban environment. The expected collision rates are calculated for the Medium Access Control (MAC) layer. The eventual packet loss rates are calculated with the MAC and Physical (PHY) layers combined. For this purpose, a new co-channel interference model is presented. The model calculates the average Carrier to Interference ratio (C/I) averaged across all the colliding events. It takes into account the partial overlap durations and the relative power of each colliding signal. The model shows that a collision does not always cause a packet loss. Packet losses occur if there is a collision and if the C/I is below a threshold. The performance evaluation is presented using a combination of analytical and simulation methods. The analytical methods provide the theoretical foundation, and have been used to validate the simulation results. Furthermore, the system models are developed from experimental data obtained from measurements with real hardware. Numerical results are provided with a low bit rate Gaussian Frequency Shift Keying (GFSK) modulation at the PHY layer, which is derived from the IEEE 802.15.4 standard specification. This paper provides guidance on selecting the right GFSK modulation parameters for such low bit-rate and narrow bandwidth IoT applications. The analysis and simulation results show that larger beacon intervals help in reducing beacon loss rates, at the cost of larger beacon acquisition latency. On the flip side, the gateway discovery latency reduces with increasing GW density thanks to abundance of beacons.

The coronavirus disease 2019 (COVID-19) pandemic, caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has spread rapidly to most parts of the world, causing high numbers of deaths and significant social and economic impacts. SARS-CoV-2 is a novel coronavirus with a suggested zoonotic origin and with the potential for cross-species transmission among animals. Antarctica can be considered the only continent free of SARS-CoV-2 although at the end of the 2019-2020 tourist season, at least one SARS-CoV-2 positive tourist visited the Antarctic Peninsula. Therefore, concerns have been expressed regarding the potential human introduction of this virus to the continent through the activities of research or tourism with potential effects including those related to human health, but also the potential for virus transmission to Antarctic wildlife. This reverse-zoonotic transmission risk to Antarctic wildlife is assessed considering the available information on host susceptibility, dynamics of the infection in humans, and contact interactions between humans and Antarctic wildlife. Measures to reduce the risk are proposed as well as the identification of knowledge gaps related to this issue.

Bacteria currently included in Rhizobium leguminosarum are too diverse to be considered a single species, so we can refer to this as a species complex (the Rlc). We have found 429 publicly available genome sequences that fall within the Rlc and these show that the Rlc is a distinct entity, well separated from other species in the genus. Its sister taxon is R. anhuiense. We constructed a phylogeny based on concatenated sequences of 120 universal (core) genes, and calculated pairwise average nucleotide identity (ANI) between all genomes. From these analyses, we concluded that the Rlc includes 18 distinct genospecies, plus 7 unique strains that are not placed in these genospecies. Each genospecies is separated by a distinct gap in ANI values, usually at around 96% ANI, implying that it is a 'natural' unit. Five of the genospecies include the type strains of named species: R. laguerreae, R. sophorae, R. ruizarguesonis, "R. indicum" and R. leguminosarum itself. The 16S ribosomal RNA sequence is remarkably diverse within the Rlc, but does not distinguish the genospecies. Partial sequences of housekeeping genes, which have frequently been used to characterise isolate collections, can mostly be assigned unambiguously to a genospecies, but alleles within a genospecies do not always form a clade, so single genes are not a reliable guide to the true phylogeny of the strains. We conclude that access to a large number of genome sequences is a powerful tool for characterising the diversity of bacteria, and that taxonomic conclusions should be based on all available genome sequences, not just those of type strains.