The endogenous miRNAs of breast milk are the products of more than 1,000 nonprotein-coding genes, giving rise to mature small regulatory molecules of 19–25 nucleotides. They are incorporated in macromolecular complexes, loaded on Argonaut proteins, sequestrated in exosomes, lipid complexes, or present in exfoliated cells of epithelial, endothelial, or immune origins. Their expression is dependent on the stage of lactation, however their detection depends on progress in RNA sequencing and the reappraisal of small RNAs definition. Some miRNAs from plants are detected in breast milk, opening the possibility of stimulation of immune cells of the allergic repertoire. Each miRNA harbors a seeding sequence, which targets mRNAs, gene promoters, or long noncoding RNAs. Their activities depend on their bioavailability. Efficient doses of miRNAs are estimated at roughly 100 molecules in the cytoplasm of target cells from in vitro and in vivo experiments. Each miRNA is included in networks of stimulation/inhibition/sequestration driving the expression of cellular phenotypes. Three types of stress applied during lactation to manipulate miRNA supply, have been explored on the rodent offspring: foster mother, cafeteria diet, early weaning. The review present the main mature miRNAs described across current mothers’ cohorts, their bioavailability in experimental models, and the studies assessing the potentials of miR-26 or miR-320 miRNA families to alter offspring phenotype.

The connexin gene family is the most prevalent gene that contributes to hearing loss. Connexins 26 and 30, encoded by GJB2 and GJB6 respectively, are the most abundant expressed connexins in the inner ear. Connexin 43 which is encoded by GJA1 appears to be widely expressed in various organs, including the heart, skin, brain, and inner ear. The mutations that arise in GJB2, GJB6 and GJA1 can all result in comprehensive or non-comprehensive genetic deafness in newborns. As it is predicted that connexins include at least 20 isoforms in humans, the biosynthesis, structural composition, and degradation of connexins must be precisely regulated so that the gap junctions can operate properly. Certain mutations result in connexins possessing a faulty subcellular localization, failing to transport to the cell membrane and preventing gap junction formation, ultimately leading to connexin dysfunction and hearing loss. In this review, we provide a discussion of the transport models for connexin 43, connexins 30 and 26, mutations affecting trafficking pathways of connexin 26, the existing controversies in trafficking pathways of connexins, and the molecules involved in connexin trafficking and their functions. This review can contribute to a new way of understanding the etiological principles of connexin mutations and finding therapeutic strategies for hereditary deafness.

Background: the aim of this study was to assess acute changes on left atrial (LA) function a during a progressive exercise in patients with heart failure with mid-range ejection fraction (HFmrEF) in comparison to healthy controls (HS). Methods: twenty patients with established HFmrEF were compared with 10 HS, age-matched controls. All subiects performed a stepwise exercise test on cyclette. Echocardiography was performed at baseline, during submaximal effort, at peak of exercise, and after 5 minutes of recovery. Results: HS obtained an higher value of METs at peak exercise than HFmrEF (7.4 vs 5.6; between group p 0.002). Heart rate and systolic blood pressure presented a greater increase in the HS group than in HFmrEF (between-groups p 0.006 and p 0.003 respectively). In the HFmrEF group peak atrial longitudinal strain (PALS), and conduit strain were both increased at submaximal exercise (p<0.05 for both versus baseline) and remained constant at peak exercise. Peak atrial contraction strain (PACS) did not show significant changes during the exercise. In the control group PALS and PACS increased significantly at submaximal level (p<0.05 for both versus baseline) but PALS returned near baseline values at peak exercise; conduit strain decreased progressively during the exercise in HS. Stroke volume (SV) increased in both groups at submaximal exercise; at peak exercise SV remained constant in the HFmrEF while it decreased in controls (between-groups p 0.002). Conclusions: Patient with HFmrEF, show a proper increase of LA reservoir function during incremental exercise that contributes to maintain SV throughout the exercise.

The outbreak of COVID-19 in 2020 caused significant disruptions to global shipping and the world economy. This paper aims to investigate the impact of the pandemic on global shipping by analyzing the Baltic Dry Index (BDI). The BDI is a metric that reflects the worldwide shipping costs and directs related to supply and demand conditions, making it an indicator of economic production. The study utilizes data from 2019 to 2021, before and after the outbreak of COVID-19, and considers 13 independent variables, including raw materials, energy, stock market indexes, global port calls, and confirmed COVID-19 cases to investigate how to influent the BDI. The study employs stepwise regression to select variables and build models before and after the pandemic. The findings reveal that the key factors affecting the freight index BDI before the outbreak are: international scrap steel prices, iron ore prices, and the Commodity Research Bureau Index. However, after the COVID-19 outbreak, the factors affecting the BDI changed to the Shanghai Index, global port calls, and the number of confirmed COVID-19 cases.

Atherosclerosis (AS) is a chronic progressive disease caused by various factors, and causes various cerebrovascular and cardiovascular diseases (CVDs). Reducing the plasma levels of low-density lipoprotein-cholesterol (LDL-C) is the primary goal in preventing and treating AS. Proprotein Convertase Subtilisin/Kexin Type 9 (PCSK9) plays a crucial role in regulating LDL-C metabolism. Panax notoginseng has potent lipid-reducing effects and protects against CVDs, and its saponins induce vascular dilatation, inhibit thrombus formation, and are used in treating CVDs. However, the anti-AS effect of the secondary metabolite, 20(S) -protopanaxatriol (20(S)-PPT), remains unclear. In this study, the anti-AS effect and molecular mechanism of 20(S)-PPT were investigated in vivo and in vitro by western blotting, real time-polymerase chain reaction (RT-PCR), Enzyme-linked Immunosorbent Assay (ELISA), immunofluorescence staining, and other assays. The in vitro experiments revealed that 20(S)-PPT reduced the levels of PCSK9 in the supernatant of HepG2 cells, upregulated low density lipoprotein receptor (LDLR) protein levels, promoted LDL uptake by HepG2 cells, and reduced PCSK9 mRNA transcription by upregulating the levels of FoxO3 protein and mRNA and decreasing the levels of HNF1α protein and mRNA. The in vivo experiments revealed that 20(S)-PPT upregulated aortic αSMA expression, increased the stability of atherosclerotic plaques, and reduced aortic plaque formation induced by a high-cholesterol fed in ApoE-/- mice (HCF group). Additionally, 20(S)-PPT reduced the aortic expression of CD68, reduced inflammation in the aortic root, and alleviated the hepatic lesions in the HCF group. The study revealed that 20(S)-PPT inhibited LDLR degradation via PCSK9 to alleviate AS.

The use of machine learning techniques to predict yield based on remote sensing is a no-return path and studies conducted on farm aim to help rural producers in decision-making. Thus, commercial fields equipped with technologies in Mato Grosso, Brazil, were monitored by satellite images to predict cotton yield using supervised learning techniques. The objective of this research was to identify how early in the growing season, which vegetation indices and which machine learning algorithms are best to predict cotton yield at the farm level. For that, we went through the following steps: 1) We observed the yield in 398 ha (3 fields) and eight vegetation indices (VI) were calculated on five dates during the growing season. 2) Scenarios were created to facilitate the analysis and interpretation of results: Scenario 1: All Data (8 indices on 5 dates = 40 inputs) and Scenario 2: best variable selected by Stepwise regression (1 input). 3) In the search for the best algorithm, hyperparameter adjustments, calibrations and tests using machine learning were performed to predict yield and performances were evaluated. Scenario 1 had the best metrics in all fields of study, and the Multilayer Perceptron (MLP) and Random Forest (RF) algorithms showed the best performances with adjusted R2 of 47% and RMSE of only 0.24 t ha^-1, however, in this scenario all predictive inputs that were generated throughout the growing season (approx. 180 days) are needed, so we optimized the prediction and tested only the best VI in each field, and found that among the eight VIs, the Simple Ratio (SR), driven by the K-Nearest Neighbor (KNN) algorithm predicts with 0.26 and 0.28 t ha^-1 of RMSE and 5.20% MAPE, anticipating the cotton yield with low error by ±143 days, and with important aspect of requiring less computational demand in the generation of the prediction when compared to MLP and RF, for example, enabling its use as a technique that helps predict cotton yield, resulting in time savings for planning, whether in marketing or in crop management strategies.

Previous studies have mostly examined how sustainable cities try to promote non-motorized travel by creating a walking-friendly environment. Such existing studies provide little research that identifies how the built environment affects pedestrian volume in high-density areas. This paper presents a methodology that combines person correlation analysis, stepwise regression, and principal component analysis for exploring the internal correlation and potential impact of built environment variables. To study this relationship, cross-sectional data in the Melbourne central business district were selected. Pearson’s correlation coefficient confirmed that visible green index and intersection density were not correlated to pedestrian volume. The results from stepwise regression showed that land-use mix degree, public transit stop density, and employment density could be associated with pedestrian volume. Moreover, two principal components were extracted by factor analysis. The result of the first component yielded an internal correlation where land-use and amenities components were positively associated with the pedestrian volume. Component 2 presents parking facilities density, which negatively relates to the pedestrian volume. Based on the results, existing street problems and policy recommendations were put forward to suggest diversifying community service within walking distance, improving the service level of the public transit system, and restricting on-street parking in Melbourne.

Scientific studies had shown that mixed forests of silver fir (Abies alba Mill.) and European beech (Fagus sylvatica L.) provide higher ecosystem services than monospecific forests. Mixed forests are known for their high resilience to climate change impacts and superior biodiversity compared to monospecific forests. In many countries, promotion of mixed forests in forest management is becoming a government policy since they can contribute to fulfill the Sustainable Development Goals set by the United Nation, respectively Goal 13 and 15. However, not much is known about public perceptions on mixed forests compared to monoculture forests. Our study on ecosystem services provided by mixed and monospecific forests in southwest Germany fill this gap. Based on a survey with 520 valid responses we analyzed people’s perception on 18 different supporting, cultural, regulating and provisioning ecosystem services measured by Likert scale. Stepwise regression analyses show relations between social profiles (gender, age, education, profession) and preferences on respondents’ perceptions. Our findings show that people perceive that mixed forests provide better cultural, regulating and supporting ecosystem services than monospecific forests of fir and beech whereas provisioning services were perceived as being equally or better provided by monospecific forests. Significant effects towards a positive perception on ecosystem services provided by mixed forests were mainly influenced by the perceived abundance of old trees, feeling of pleasantness in mixed forests, age, profession, and education. Our findings indicate that there is a high public support for the promotion of silver fir and beech mixed forests in Southwest Germany.

The gelation time tg necessary for a solution of functional (associating) molecules to reach its gel point after a temperature jump, or a sudden concentration change, is theoretically calculated as a function of the concentration and temperature for the molecules carrying the number f of functional groups. Quite generally, tg is given by the product of the relaxation time tR and a thermodynamic factor Q. For pairwise cross-linking, and cross-linking with a fixed multiplicity k, precise values of tg are derived. For cross-linking with variable multiplicity, kinetic equation of stepwise association is derived for the reactivity pk of the functional groups, on the basis of which tg and tR are estimated. The thermodynamic factor Q is shown to generate a singularity of logarithmic divergence as the temperature (concentration) approaches the equilibrium gel point, while the relaxation time tR changes continuously across it. The retardation effect on the gelation time due to the reversibility of the cross-linking is explicitly calculated for some specific models of cross-linking. For a micellar cross-linking covering a wide range of the multiplicity, as seen in hydrophobically-modified water-soluble polymers, tR is shown to obey a formula similar to the Aniansson-Wall law.

The article presents the results of cyanide leaching of gold-containing concentrate using the trichlorocyanuric acid (TCCA) oxidizer. Gold-containing concentrate obtained from a gold tailings sample from a gold recovery factory (GRF) in one of the deposits of Kazakhstan that was not previously studied for concentrability. According to X-ray phase analysis and energy dispersive spectrometry (DSM) data, the main compounds in the tailings sample under study are: pyrite FeS2, quartz SiO2, calcite CaCO3, albite NaAlSi3O8, muscovite KAl2Si3AlO10(OH)8, dolomite CaMg(CO3)2, and oxidized iron compounds. Microscopic studies have established the presence of gold grains in free form, ranging in size from 0.9-10.2 mkm Au-ultrafine and fine gold. Obtaining a gold-containg concentrate with a gold content of 15.95 g / t is possible according to the enrichment scheme, which includes centrifugal separation, classification according to the fineness class -0.05 mm, additional grinding of hydrocyclone sands to a fineness of 90.0-95.0% of the class finer than 0.050 mm, and control centrifugal separation. Since pyrite in technogenic raw materials is the main gold-containing mineral, this paper presents studies on the oxidizability of pyrite with the TCCA oxidizer. The results of studies on the oxidation of pyrite using the TCCA oxidizer show that the products of its hydrolysis oxidize pyrite with the formation of various iron compounds on its surface. Pretreatment of gold-containing concentrate with oxidizer TCCA for 3 hours before the cyanidation process (20 hours) allows to increase the recovery of gold in the solution by 5.8 %.

Flash flood is one of the most significant natural disasters in China, particularly in mountainous area, causing heavy economic damage and casualties of life. Accurate risk assessment is critical to an efficient flash flood management. There are more than 530,000 small watersheds in 2058 counties in China where flash flood should be prevented. In practice, with limited fund and different risk levels, the priorities of each small watershed for flash flood prevention and control are also needed for an efficient flash flood management. This paper, take Licheng county in China as an example, aims to give out these priorities for management. First, sensitive indexes are identified among index system, which includes 9 indexes based on underlying surface characteristics of small watershed in hilly region. Second, the range of each index and the rank division of each index for evaluation are determined. Based on the rank divisions for evaluation, the flash flood risk grade eigenvalue (H) is calculated by Variable Fuzzy Method (VFM ) using 1000 samplings generated by Latin hypercube sampling method. Third, the key sensitivity factors that affect flash flood risk grade eigenvalue (H) are assessed by two different global sensitivity analysis methods -- stepwise regression analysis and mutual entropy. Both results indicate that watershed slope (S) is the most sensitive factor; the second is antecedent precipitation index (CN); while other factors are slightly different sensitive in sequence. This study shows that stepwise regression analysis and mutual information analysis are appropriate for the sensitivity analysis of mountain flash flood risk. Finally, based on watershed slope (S), the priorities of flash flood prevention and control of 119 small watersheds in Licheng county are given out.

This study presents a research plan that utilizes data obtained from wearable devices to identify human activities and gain insights into human behavior. We developed a model capable of classifying activities similar to human behavior and evaluated the effectiveness and generalization capabilities of this model. The data underwent initial preprocessing, including standardization and normalization. Additionally, recognizing the inherent similarities between human activity behaviors, we introduced a multi-layer classifier model. The first layer is a random forest model based on stepwise regression, which may encounter reduced accuracy for similar activities. The second layer employs a Support Vector Machine (SVM) model based on Kernel Fisher Discriminant Analysis (KFDA). KFDA is used to reduce the dimensionality of data points with potential confusion, followed by SVM for classification. The model was experimentally evaluated and applied to four benchmark datasets: UCI DSA, UCI HAR, WISDM, and IM-WSHA. The experimental results demonstrate that our approach achieved recognition accuracies of 99.71%, 98.71%, 99.12%, and 97.6% on these datasets, indicating excellent recognition performance. Furthermore, to assess the model's generalization ability, we performed K-fold cross-validation on the random forest model and utilized ROC curves for the SVM classifier. The results indicate that our multi-layer classifier model exhibits robust generalization capabilities.

To date, radiation adaptation response has been reported as a low-dose related phenomenon and has been associated with radiation hormesis. Well-known cancers are caused by non-radiation active reactants, in addition to radiation. A model of suppression for radiation-specific cancers was previously reported, but the model did not target radiation-nonspecific cancers. In this paper, we describe kinetic models of radiation-induced suppressors for general radiation non-specific cancers, estimating the dose that induces the maximum hormesis effect while satisfying the condition that the risk is approximately proportional to dose above 100 mSv. It was found that the radiation hormesis effect is maximal at about 20 mSv when the rate constant for generation is the same as the rate constant for decomposition. When the two rate constants are different, the dose at which the radiation hormesis effect is maximized depends on both rate constants, but the dose increases as the two rate constants approach each other, reaching a maximum of about 20 mSv. This conclusion may lead to the discovery of unknown cancer suppressors at low doses and the development of cancer suppression methods in the future.

The strategy of any organization is based on the growth of its customer base, and one of 5 its principles is that selling a product to an existing customer is much more profitable than acquiring 6 a new customer. However, this approach has several opportunities for improvement, since it usu- 7 ally has a totally reactive approach, which does not give opportunity to the areas specialized in 8 customer experience and recovery, to give an effective response for that moment, since the customer 9 is gone at the time of the intervention. This happens because usually a diagnostic analysis of cus- 10 tomers who have stopped buying products or services in a defined period, commonly three (3) pe- 11 riods or months, is performed. This thesis work challenges the way to face this problem, and pro- 12 poses the development of a complete solution, which does not focus exclusively on the prediction 13 of churn, as is usually done in the state of the art research, but to intervene in different interactions 14 that can be carried out with customers. The above focused not only to prevent customer churn, but 15 to generate an added value of continuous improvement in sales processes, increase customer pene- 16 tration, leading to an improvement in customer experience and consequently, an increase in cus- 17 tomer loyalty.

The strategy of any organization is based on the growth of its customer base, and one of 5 its principles is that selling a product to an existing customer is much more profitable than acquiring 6 a new customer. However, this approach has several opportunities for improvement, since it usu- 7 ally has a totally reactive approach, which does not give opportunity to the areas specialized in 8 customer experience and recovery, to give an effective response for that moment, since the customer 9 is gone at the time of the intervention. This happens because usually a diagnostic analysis of cus- 10 tomers who have stopped buying products or services in a defined period, commonly three (3) pe- 11 riods or months, is performed. This paper challenges the way to face this problem, and proposes 12 the development of a complete solution, which does not focus exclusively on the prediction of 13 churn, as is usually done in the state of the art research, but to intervene in different interactions 14 that can be carried out with customers. The above focused not only to prevent customer churn, but 15 to generate an added value of continuous improvement in sales processes, increase customer pene- 16 tration, leading to an improvement in customer experience and consequently, an increase in cus- 17 tomer loyalty.

Запропонована методика спрямована на визначення та прогнозування технічного стану елементів мосту, що може слугувати прогресивним інженерним інструментом для оцінки надійності та довговічності. Розроблено на основі фундаментальних досліджень, які узагальнюють досвід вивчення фізико-механічних і фізико-хімічних властивостей матеріалів мостових конструкцій, що експлуатуються в реальних умовах. Теоретичною основою методики є модель надійності та прогнозування залишкового ресурсу елементів мосту на основі теорії Маркова. Розроблена методика призначена для оцінки технічного стану окремих елементів мосту з подальшою комплексною оцінкою всієї конструкції. За показник технічного стану прийнята надійність при експлуатації. Цей кількісний показник надійності в моделі є критерієм для: оцінки рівня безпеки елементів мосту; ранжування елементів мосту за необхідністю для конкретних видів ремонту, реконструкції або заміни; стратегічне планування витрат на ремонт або реконструкцію в умовах обмеженого фінансування; прогнозування залишкового ресурсу елементів. Для застосування розробленої методики запропоновано алгоритм оцінки та прогнозування технічного стану мостів. Було проведено математичний експеримент розробленої методики, який підтвердив адекватність висунутої гіпотези, тобто використання моделі надійності та прогнозування залишкового ресурсу елементів мосту. По-перше, запропоновано триступеневий механізм уточнення технічного стану мосту, суттєво підвищення точності розрахунків. Тому розроблена методика має практичне значення і може слугувати основою для інформаційно-аналітичних систем управління станом мостів.

The timely diagnosis of defects at their incipient stage of formation is crucial to extend the life-cycle of technical appliances. This is the case of mechanical-related stress, either due to long aging degradation processes (e.g., corrosion) or in-operation forces (e.g., impact events), which might provoke detrimental damages, such as cracks, disbonding or delaminations, most commonly followed by the release of acoustic energy. The localization of these sources can be successfully fulfilled via adoption of Acoustic Emission (AE)-based inspection techniques through the computation of the Time of Arrival (ToA), namely the time at which the induced mechanical wave released at the occurrence of the acoustic event arrives to the acquisition unit. However, the accurate estimation of the ToA may be hampered by poor Signal-to-Noise ratios (SNRs). In these conditions, standard statistical methods typically fail. In this work, two alternative Deep Learning methods are proposed for ToA retrieval, namely a Dilated Convolutional Neural Network (DilCNN) and a Capsule Neural Network for ToA (CapsToA). These methods have the additional benefit of being portable on resource-constrained microprocessors. Their performance has been extensively studied on both synthetic and experimental data, focusing on the problem of ToA identification for the case of a metallic plate. Results show that the two novel methods can achieve localization errors which are up to 70% more precise than those yielded by conventional strategies, even when the SNR is severely compromised (i.e., down to 2 dB). Moreover, DilCNN and CapsNet have been implemented in a tiny machine learning environment and then deployed on microcontroller units, showing a negligible loss of performance with respect to offline realizations.

During the last trimester of gestation and for the first 18 months after birth, both docosahexaenoic acid,22:6n-3 (DHA) and arachidonic acid,20:4n-6 (ARA) are preferentially deposited within the cerebral cortex at a rapid rate. Although, the structural and functional roles of DHA in brain development are well investigated, similar roles of ARA are not well documented. The mode of action of these two fatty acids and their derivatives at different structural-functional roles and their levels in the gene expression and signaling pathways of the brain have been continuously emanating. In addition to DHA, importance of ARA has been much discussed in recent years for fetal and postnatal brain development and the maternal supply of ARA and DHA. These fatty acids are also involved in various brain developmental processes; however, their mechanistic cross talks are not clearly known yet. This review describes the importance of ARA, in addition to DHA to support the optimal brain development and growth and functional roles in the brain.

Delay in data transmission is one of key performance indicators (KPIs) of a network. The planning and project value of delay in network management is of crucial importance for the optimal allocation of network resources and their performance focuses. To create optimal solutions, predictive models, which are currently most often based on machine learning (ML), are used. This paper aims to investigate the training, testing and selection of the best predictive delay model for a VoIP service in an Long Term Evolution (LTE) network using three ML techniques - Neural Networks (NN), Support Vector Machines (SVM) and k-Nearest Neighbors (k-NN). The space of model input variables is optimized by dimensionality reduction techniques: RReliefF algorithm, Backward selection via the recursive feature elimination algorithm and the Pareto 80/20 rule. A three-segment road in the geo-space between the cities of Banja Luka (BL) and Doboj (Db) in the Republic of Srpska (RS), Bosnia and Herzegovina (BiH), covered by the cellular network (LTE) of the M:tel BL operator was chosen for the case study. The results show that, in all three optimization approaches, the k-NN model is selected as the best solution. For the RReliefF optimization algorithm, the best model has 6 inputs and minimum relative error (RE), RE=0.109; for the Backward selection via the recursive feature elimination algorithm, the best model has 4 inputs and RE=0.041; and for the Pareto 80/20 rule, the best model has 11 inputs and RE= 0.049. The comparative analysis of the results concludes that according to observed criteria for the selection of the final model, the best solution is an approach to optimizing the number of predictors based on the Backward selection via the recursive feature elimination algorithm.

This contribution is an attempt to reconstruct the favorable atmosphere that prevailed in Lau-sanne in 1986-87 and provided the backdrop of our invention of two-dimensional ion cyclotron resonance mass spectroscopy (2D ICR-MS). To avoid a self-centered histoire d’ancien combattant, we shall try to emphasize the context, the contributions of key players within our nascent research group at UNIL and the established group of Tino Gäumann at EPFL, the role of external speakers, and the open atmosphere that was not yet polluted by bibliometrics, obsessive concern with im-pact factors, and top-down management of research. We shall also explain why the idea of 2D ICR-MS has been ignored for many years and still has a limited impact: different scientific cul-tures in the ICR and NMR communities, different concerns with fundamental vs. applied research, different status of theory and numerical simulations, different levels of commitment of instrument manufacturers, not to mention many theoretical problems that appear to be at least as challenging in ICR as in NMR.

This paper presents work done as part of a transformation effort towards a greener and more sustainable Aluminium manufacturing plant. The effort includes reducing the carbon footprint by minimising waste and increasing operational efficiency. The contribution of this work includes the reduction of waste through the implementation of autonomous, real-time quality measurement and classification at an Aluminium casthouse. Data is collected from the MV20/20 which uses ultrasound pulses to detect molten Aluminium inclusions, which degrade the quality of the metal and cause subsequent metal waste. The sensor measures cleanliness, inclusion counts and distributions from 20 - 160 microns. The contribution of this work is in the development of business analytics to implement condition-based monitoring through anomaly detection, and to classify inclusion types for samples that failed. For anomaly detection, multivariate K-Means and DBSCAN algorithms are compared as they have been proven to work in a wide range of datasets. For classification, a two-stage classifier is implemented. The first stage classifies the success or failure of the sample, while the second stage classifies the inclusion responsible for the failed sample. The algorithms considered include logistic regression, support vector machine, multi-layer perceptron and radial basis function network. The multi-layer perceptron offers the best performance using k-fold cross-validation, and is further tuned using grid search to explore the possibility of an even better performance. The results reveal that the model has achieved a global maximum in performance. Recommendations include the integration of additional sensor systems and the improvements in quality assurance practices.

This study investigates the spatio-temporal variability of the onset, offset, and Length of the rainy season in Senegal over the 1981-2018 period. The onset, offset dates, and length of the rainy season are crucial parameters for agricultural planning in West Africa, which exhibits high interannual and spatial variability in rainfall. The objective is to detect and spatially classify these phenological parameters across Senegal using different approaches. Daily precipitation data from the Climate Hazards group InfraRed Precipitation with Stations (CHIRPS) dataset over the study period and ERA5 reanalysis were used. The method of was applied to detect the onset, offset dates, and length of the rainy season. The Kohonen algorithm was then used to spatially classify these parameters on topological maps. A hierarchical ascendant classification was also performed to reduce the number of classes obtained. Finally, a composite analysis of moisture transport before the onset and end of the 1984 and 2007 seasons was conducted with ERA5 data. The results show a meridional gradient of the start of the season, progressively later from southeast to northwest, while the end follows a north-south gradient. The duration of the rainy season ranges from 45 days in northern Senegal to 150 days in the south. The maximum number of dry days also decreases from north to south. The Kohonen self-organizing maps allow spatial prediction of the onset, end date, and duration of the rainy season across Senegal. The dynamics analysis reveals that early onset years are associated with stronger and earlier northward moisture transport over West Africa, underscoring the role of this parameter in triggering the rainy season. These promising results can provide an early warning to policymakers and farmers on the start and end dates of the season in each area of Senegal.

Densely urbanized areas, with a low percentage of green vegetation, are highly exposed to Heat Waves (HW) which nowadays are increasing in terms of frequency and intensity also in the middle-latitude regions, due to ongoing Climate Change (CC). Their negative effects may combine with those of the UHI (Urban Heat Island), a local phenomenon where air temperatures in the compact built up cores of towns increase more than those in the surrounding rural areas, with significant impact on the quality of urban environment, on citizens health and energy consumption and transport, as it has occurred in the summer of 2003 on France and Italian central-northern areas. In this context this work aims at designing and developing a methodology based on aero-spatial remote sensing (EO) at medium-high resolution and most recent GIS techniques, for the extensive characterization of the urban fabric response to these climatic impacts related to the temperature within the general framework of supporting local and national strategies and policies of adaptation to CC. Due to its extension and variety of built-up typologies, the municipality of Rome was selected as test area for the methodology development and validation. First of all, we started by operating through photointerpretation of cartography at detailed scale (CTR 1: 5000) on a reference area consisting of a transect of about 5x20 km, extending from the downtown to the suburbs and including all the built-up classes of interest. The reference built-up vulnerability classes found inside the transect were then exploited as training areas to classify the entire territory of Rome municipality. To this end, the satellite EO HR (High Resolution) multispectral data, provided by the Landsat sensors were used within a on purpose developed "supervised" classification procedure, based on data mining and “object-classification” techniques. The classification results were then exploited for implementing a calibration method, based on a typical UHI temperature distribution, derived from MODIS satellite sensor LST (Land Surface Temperature) data of the summer 2003, to obtain an analytical expression of the vulnerability model, previously introduced on a semi-empirical basis.

This study investigates the long-term stability of the Suomi National Polar-orbiting Partnership (S-NPP) Visible Infrared Imaging Radiometer Suite (VIIRS) moderate-resolution Thermal Emissive Bands (M TEBs; M12 – M16) covering a period from February 2012 to August 2020. It also assesses inter-sensor consistency of the VIIRS M TEBs among three satellites-S-NPP, NOAA-20, and NOAA-21 over eight months spanning from March 18 to November 30, 2023. The field of interesting is limited to the ocean surface between 60°S and 60°N, specifically under clear-sky conditions. Taking radiative transfer modeling (RTM) as the transfer reference, we employed the Community Radiative Transfer Model (CRTM) to simulate VIIRS TEB brightness temperature (BTs), incorporating European Centre for Medium-range Weather Forecasts (ECMWF) reanalysis data as inputs. Our results reveal two key findings. Firstly, the reprocessed S-NPP VIIRS TEBs exhibit a robust long-term stability, as demonstrated through analyses of the observation minus background BT differences (O-B ∆BTs) between VIIRS measurements (O) and CRTM simulations (B). The drifts of the O-B BT differences are consistently less than 0.105 K/Decade across all S-NPP VIIRS M TEB bands. Notably, observations from VIIRS M14 and M16 stand out with drifts well within 0.04 K/Decade, reinforcing their exceptional reliability for climate change studies. Secondly, excellent inter-sensor consistency among these three VIIRS instruments is confirmed through the double-difference analysis method (O-O). This method relies on the O-B BT differences obtained from daily data. The mean inter-VIIRS O-O BT differences remain within 0.08 K for all M TEBs, except for M13. Even in the case of M13, the O-O BT differences between NOAA-21 and NOAA-20/S-NPP have values of 0.312 K and 0.234 K, respectively, which are comparable to the 0.2 K difference between some TEBs among VIIRS and MODIS. These disparities are primarily attributed to the significant differences in the Spectral Response Function (SRF) of NOAA-21 compared to NOAA-20 and S-NPP. Our study confirms the RTM-based TEB quality evaluation method’s versatility and effectiveness in assessing long-term sensor stability and inter-sensor consistency. The double-difference approach effectively mitigates uncertainties and biases inherent to CRTM simulations, establishing itself a robust mechanism for assessing inter-sensor consistency. In addition, we’ve observed that, except for M13, M12 always exhibits larger spatial variations of O-O BT differences with greater uncertainties compared to the other M TEBs. The influence of solar contribution through sea surface reflection on the Top of Atmosphere (TOA) radiance measurements during daytime in M12 should not be underestimated.