The emergence of diverse infections worldwide, which is a serious global threat to human existence, necessitate the urgent development of novel therapeutic candidates that can combat these diseases with efficacy. Isatin, a secondary metabolite from tryptophan is considered a privileged scaffold and favorable pharmacophore with a unique structural moiety and varied chemical and biological properties resulting in its widespread applications by medicinal chemists. Molecular hybridization is one of the most common and important techniques use in the synthesis of their bioactive hybrids in drug discovery. This review containing published articles from 2005 to 2022 focuses on isatin hybrids which have been synthesized and reported in the literature alongside a discussion on their biological properties. The purpose of this review is to set up the direction for the design and development of isatin-hybrids with tailored biological properties as effective therapeutic candidates inspired by nature.

An experiment was conducted in 2016 & 2017 for development of novel rice hybrids for aerobic ecology with lesser yield penalties in comparison to irrigated ecosystem, further with added advantage of reduced methane emissions and water budget as witnessed in irrigated system. Based on the restorer / maintainer reaction and spikelet fertility (%), 10 restorer lines were selected to cross with 3 CMS lines in the line by tester fashion in Yasangi (summer) season 2016-17. Resulting 30 experimental hybrids besides 13 parental lines (10 Restorer lines and 3 B - lines of akin CMS lines) and checks (GK 5022, CR Dhan 201) assessed during Vankalam (rainy) season 2017 at three different places/locations viz., Rajendranagar, Warangal and Kampasagar. The outcome of experiment were two experimental hybrids viz., APMS-6A × HRSV – 7 and IR-79156A × ATR – 372, were categorized as stable hybrids with desirable sca effects, heterosis (ranging from 7% to 13%) over best check GK 5022 along with an in-essence performance for yield and other yield attributing characters.

Bacterial infections have attracted the attention of researchers in recent decades, especially due to the special problems they have faced, such as their increasing diversity and resistance to antibiotic treatment. The emergence and development of the SARS-CoV-2 infection stimulated even more research, to find new structures with antimicrobial and antiviral properties. Among the heterocyclic compounds with remarkable therapeutic properties, benzimidazoles and triazoles stand out, possessing antimicrobial, antiviral, antitumor, anti-Alzheimer, anti-inflammatory, analgesic, antidiabetic, or anti-ulcer activities. In addition, the literature of the last decade reports benzimidazole-triazole hybrids with improved biological properties compared to the properties of simple mono-heterocyclic compounds. This review aims to provide an update on the synthesis methods of these hybrids, along with their antimicrobial and antiviral activities, as well as the structure–activity relationship reported in literature.

Poplars (Populus spp.) are of significant ecological and economic importance. Long-term breeding efforts were aimed mainly at obtaining fast-growing and productive plants and less considered resistance to pests. This study aimed to identify the patterns of susceptibility to Saperda carcharias (Linnaeus, 1758) (Coleoptera: Cerambycidae) among Populus hybrids and pure species, considering crossing combinations and some other traits. In our research, 35 clones of poplar species and hybrids of the Ukrainian and foreign selection from the Aigeiros, Tacamahaca, and Leucoides sections were tested in 2021 and 2023 in the plantation created in 2014 in Eastern Ukraine. S. carcharias preferred infesting clones with earlier foliage development, larger diameters, and height increments. Specifically, hybrids with American maternal lineage showed the highest susceptibility, whereas those with European maternal lineage or Asian origin displayed lower infestation levels or resistance, respectively. This variability suggests a complex relationship between genetic background and pest resistance, underlining the need for a deeper understanding of the factors influencing susceptibility to S. carcharias. Selecting native species clones or creating mixed clone plantations could enhance the resilience of poplar plantations to pest threats.

The genus Eucalyptus is a globally captivated source of hardwood and is well known for its medicinal uses. The hybrid and wild species of Eucalyptus are widely used as exotic plantations due to their renowned potential of adapting to various systems and sites, furthermore, making the species the most extensively propagated. Despite unquestionable progression in biotechnological and tissue culture approaches, the productivity of plantations is still limited often due to the low efficiency of clonal propagation from cuttings. The obtained F1 hybrids yield high biomass and High-quality low-cost raw material for large-scale production, however, the development of hybrid, clonal multiplication, proliferation, and post-developmental studies are still major concerns. This riveting review describes the problems concerned with in-vitro and clonal propagation of Eucalypt plantation; recent advances in biotechnological and tissue culture practices for massive and rapid micro-propagation of Eucalyptus; as well, highlights the Eucalypt germplasm preservation techniques.

Hybrid inorganic-polymer nanocomposites can be employed in diverse applications due to the potential combination of desired properties from both the organic and inorganic components. The use of novel bottom-up in situ synthesis methods for the fabrication of these nanocomposites is advantageous compared to top-down ex situ mixing methods, as it offers increased control over the structure and properties of the material. In this review, the focus will be on the application of the sol-gel process for the synthesis of inorganic oxide nanoparticles in epoxy and polysiloxane matrices. The effect of the synthesis conditions and the reactants used on the inorganic structures formed, the interactions between the polymer chains and the inorganic nanoparticles, and the resulting properties of the nanocomposites are appraised from several studies over the last two decades. Lastly, alternative in situ techniques and the applications of various polymer-inorganic oxide nanocomposites are briefly discussed.

The hybrid zone between chromosome races of the common shrew (Sorex araneus) provides an exceptional model to study the potential role of chromosome rearrangements in the initial steps of speciation. The Novosibirsk and Tomsk races differ by a series of Robertsonian fusions with monobrachial homology. They form a narrow hybrid zone and generate hybrids with both simple (chain of three chromosomes) and complex (chain of eight or nine) synaptic configurations. Using immunolocalisation of the meiotic proteins, we examined chromosome pairing and recombination in males from the hybrid zone. Homozygotes and simple heterozygotes for Robertsonian fusions showed a low frequency of synaptic aberrations (< 10%). The carriers of complex synaptic configurations showed multiple pairing abnormalities, which might lead to reduced fertility. Recombination frequency in the proximal regions of most chromosomes of all karyotypes was much lower than in the other regions. The strong suppression of recombination in the pericentromeric regions and co-segregation of race specific chromosomes involved in the long chains would be expected to lead to linkage disequilibrium between genes located there. Genic differentiation, together with the high frequency of pairing aberrations in male carriers of the long chains, might contribute to maintenance of the narrow hybrid zone.

The cattle sector is strategic sector for both the economic development and food security of Africa. However, the low availability and quality of forage puts the most vulnerable population in the field at risk. Hybrid forages have proven to be a real alternative for enhancing both the food security and sustainability of the sector. They are the product of genetic improvements and combine the superior traits of different materials. In 1987, the International Center for Tropical Agriculture (CIAT) began this line of research and together with the private sector various ma-terials have been released until today. Despite their beforementioned potential, forage hybrid adoption levels are still low in Africa, which is related to various factors among which the availability of seeds and planting material stands out. This document analyzes the potential markets for new forage hybrids adapted to the environmental conditions of eastern Africa and partially western Africa. Likewise, an estimation of the commercial value of these markets is provided. The results show a potential market of 414,388 ha for new interspecific hybrids of Urochloa and 528,409 ha for potential hybrids of Megathyrsus maximus, with approximate values of 73.5 and 101.1 million dollars, respectively. Ethiopia, Tanzania, and Kenya have a 70% market share for Urochloa, while South Sudan, Ethiopia, and Tanzania have a 67% share for Megathyrsus maximus. The results will help different actors in decision-making, i.e., regarding private sector investments in forage seed commercialization or public sector incentives supporting adoption processes, and thus contribute to increasing food security and sustainability in the region.

Biosynthetic gene clusters are specific genomic regions in microorganisms, like bacteria and fungi, responsible for producing bioactive compounds. Identifying these clusters is complex due to their diverse nature. This research presents a comprehensive approach to effective BGC identification. The study focuses on five classes of Natural Products: PKS , NRPS, RiPP, Terpenes, and Hybrid PKS-NRPS. Data was gathered from the MiBIG database in GBK format. Protein sequences from each file were extracted, and sequences under the same BGC ID were combined. Physicochemical properties were calculated, and sequence embeddings were generated using NLP techniques like CountVec, TFIDF, and Word2Vec specific to each NP class. An integrated feature matrix was created by merging physicochemical properties and generated embeddings. This matrix was used for training and testing of nine ML models such SVM, RF and many more. The study explored data balancing techniques with and without SMOTE and employed Grid Search for parameter optimization. This led to six datasets and 54 models. The LR model, using TFIDF with SMOTE, emerged as the most effective, achieving an accuracy of 0.96, AUC of 0.9912, and other strong metrics. This method enhances BGC identification for drug development, offering a broader understanding of their applications in medicine and biotechnology.

Novel bio-inspired materials have gained recently great attention, especially in medical applications. Applying sophisticated design and engineering methods, various polymer-polymer hybrid systems with outstanding performance have been developed in last decades. Hybrid systems composed of bioelastomers and hydrogels are very attractive due to their high biocompatibility and elastic nature for advanced biomaterials used in various medical applications such as drug delivery systems and scaffolds for tissue engineering. Herein, we describe the advances in current state-of-the-art design, properties and applications of polymer-polymer hybrid systems in medical applications. Bio-inspired functionalities, including bioadhesiveness, injectability, antibacterial properties and degradability applicable to advanced drug delivery systems and medical devices will be discussed in a context of future efforts towards development of bioinspired materials.

The implementation of gold-hydrogel core-shell nanomaterials in novel light-driven technologies requires the development of well-controlled and scalable synthesis protocols with precisely tunable properties. Herein, new insights are presented concerning the importance of using the concentration of gold cores as a control parameter in the seeded precipitation polymerization process to modulate – regardless of core size – relevant fabrication parameters such as encapsulation yield, particle size and shrinkage capacity. Controlling the number of nucleation points results in the facile tuning of the encapsulation process, with yields reaching 99% of gold cores even when using different core sizes at a given particle concentration. This demonstration is extended to the encapsulation of bimodal gold core mixtures with equally precise control on the encapsulation yield, suggesting that this principle could be extended to encapsulating cores composed of other materials. These findings could have significant impact on the development of stimuli-responsive smart materials.

The transferability of structure-property relationships for laser-pretreated metal adhesive joints to laser-pretreated metal – carbon fiber reinforced plastic (CFRP) bonds is investigated. Single-lap shear tests were performed on hybrid AW 6082-T6 – CFRP specimens pretreated with the same pulsed laser surface parameter sets on the metal surface as previously tested AW 6082-T6 – E320 metal adhesive joints. The fracture surfaces were characterized to determine the type of failure and elucidate differences and commonalities in the link between surface structures and single-lap shear strengths. Digital image analyses of the hybrid specimens fractured surfaces were used to quantify remaining CFRP fragments on the metallic joint side. The results indicate that high surface enlargements and the presence of undercut structures leads to single-lap shear strengths exceeding 40 MPa and 35 MPa for unaged and aged hybrid specimens respectively. While for the metal-polymer joints the trend from high strength to weakly bonded specimens was largely continuous with the degree of surface structuring, hybrid metal – CFRP joints exhibit a drastic drop in joint performance after aging if the laser-generated surface structures are less pronounced with low surface enlargements and crater depths. Surface features and hydrothermal aging determine whether the specimens fail cohesively or adhesively.

Single-molecule magnets (SMMs) have garnered significant interest in the field of molecular magnetism due to their unique magnetic properties at the nanoscale. These molecular systems exhibit magnetisation behaviour reminiscent of conventional bulk magnets but with distinct advantages such as size-dependent properties and potential applications in quantum computing and high-density data storage. However, challenges remain in harnessing their properties for practical applications, including their susceptibility to degradation and limited control over their assembly and organisation.

Bermudagrass (Cynodon spp.) is one of the drought-resistant warm-season turfgrasses adapted to the southern and transitional zones in the United States. Multiple hybrid varieties have been developed and released for use as a turfgrass and others are in pipeline. Increasing genetic di-versity of commercial varieties is vital to tackle stress tolerance. A DNA profiling study of 21 experimental selections from the Oklahoma State University (OSU) turfgrass breeding program and 11 cultivars was conducted using 51 simple sequence repeat (SSR) primer pairs that spread across the bermudagrass genome. Pairwise genetic relationship analysis among the genotypes using 352 polymorphic bands showed genetic similarity coefficients ranging from 0.59 to 0.89. Cluster analysis using the un-weighted paired group method with arithmetic average (UPGMA) method grouped the entries into six clusters. Correlation analysis identified different levels of pairwise genetic relationship among the entries that largely reflected parental relationship. Di-rectional breeding and selection for cold hardiness or drought resistance created progeny that had distinct genetic diversity in the tested bermudagrasses. It is evident that an increase in genetic diversity of the existing cultivar pool with the release of one or more of the experimental selec-tions for commercial use will strengthen and improve bermudagrass systems.

Chicory, a horticultural crop cultivated worldwide, presents many botanical varieties and local biotypes. Among these, Italian radicchio group cultivars of pure Cichorium intybus L. and interspecific hybrids with Cichorium endivia L., as the “Red of Chioggia” biotype which in turn includes several phenotypes. This study deals with a pipeline for the marker-assisted breeding of F1 hybrids: it presents the genotyping-by-sequencing results of four elite inbred lines using a RADseq approach and an original molecular assay based on CAPS markers for screening mutants with nuclear male-sterility in radicchio of Chioggia. Two thousand nine hundred fifty-three SNP-carrying RADtags were identified and used to compute the actual estimates of homozygosity, and overall genetic similarity and uniformity of the populations, as well as to determine their genetic distinctiveness and differentiation. Molecular data were further used to investigate the genomic distribution of the RADtags among the two Cichorium species, allowing their mapping in 1,131 and 1,071 coding sequences in chicory and endive, respectively. In parallel, an assay to screen the genotype at the male-sterility locus Cims-1 was developed to discriminate wild-type and mutant alleles of the causative gene myb80-like. Moreover, a RADtag mapped close to this genomic region proved the potential application of this method for future marker-assisted selection tools. Finally, combining the genotype information of the core collection, the best ten individuals from each inbred line were selected to compute the observed genetic similarity as a measure of uniformity as well as the expected homozygosity and heterozygosity estimates scorable by the putative progenies derived from selfing (pollen parent) and full-sibling (seed parent) or pair-wise crossing (F1 hybrids). This predictive approach was conducted as a pilot study for understanding the potential application of RADseq in improving molecular breeding strategies aimed at the development of inbred lines and F1 hybrids in leaf chicory.

A distinctive feature of the SARS-CoV-2 spike protein is its ability to efficiently fuse cells, thus producing syncytia found in COVID-19 patients. This commentary proposes how this ability enables spike to cause COVID-19 complications as well as side effects of COVID-19 vaccines, and suggests how these effects can be prevented..

Southern highbush blueberry plantations have been expanded into worldwide non-traditional growing areas with elite cultivars and improved horticultural practices. This article presents a comprehensive review of current production systems – alternatives to traditional open field production – such as production in protected environments, high-density plantings, evergreen production, and container-based production. We discuss the advantages and disadvantages of each system and compare their differences to the open field production. In addition, potential solutions have been provided for some of the disadvantages. We also highlight some of the gaps existing between academic studies and production in industry, providing a guide for future academic research. All these alternative systems have shown the potential to produce high yields with high quality berries. Alternative systems, compared to the field production, require higher establishment investments and thus create an entry barrier for new producers. Nevertheless, with their advantages, alternative productions have potential to be profitable.

Cotton is the most ubiquitous and profitable fiber with diverse industrial and domestic applications. Grown in over 100 countries, it has a global market value of about $40 billion and employs over 350 million people from fields to textile mills, contributing about 7% of total labor-force recruitment in developing economies. Cotton has an indeterminate growth habit and an extensive tap root system affected by soil physicochemical and environmental conditions. There is a consensus among experts that conventional cotton cultivation still has a long way to attain sustainability, which is essential if cotton will maintain its competitive edge over other natural and synthetic fibers like hemp, polyesters, and rayon. Despite several efforts already committed to growing cotton sustainably, sustainability has eluded cotton cultivation globally because of the intense farm inputs (freshwater, pesticides, and heavy-duty equipment) needs, especially in developing economies. Some of the technological advancements towards achieving the goal of sustainable cotton cultivation include the development of new varieties, improved irrigation and mulching and precision agriculture techniques, application of remote sensing and Unmanned Aerial Systems (UAS) combined with image processing, and the introduction of autonomous and multi-purpose robotic platforms for growing and harvesting cotton. This review attempts to evaluate the successes already achieved by stakeholders in moving cotton towards sustainable production and identify areas where efforts are still needed to reach sustainable production and improved profitability goals for cotton with projections for future research directions.

We hereby describe an efficient method for the preparation of a series of new 1-substituted 1,2,3-triazole-based acetaminophen derivatives through a clean, good-yielding, simple, and expeditious procedure based on the O-propargylation reaction of the acetaminophen (APAP) obtained from expired commercial tablets and the CuBr(PPh3)3-catalyzed Huisgen reaction be-tween O-propargylated APAP and diverse organoazides prepared from commercially available anilines as available starting reagents. An interesting nitric oxide-releasing 1,2,3-triazole hybrid of APAP was also obtained easily using the developed method. The structures of the designed hybrid compounds, which are expected to be pharmacologically active, were fully characterized by FT-IR, 1H- and 13C-NMR and are reported for the first time. According to the in-silico studies performed in this work and literature analysis, these hybrids are interesting models in search of new pharmacological nontoxic agents endowed with anti-inflammatory and anticancer properties.

Beer is a fermented beverage with a history as old as human civilization and its productive process has been spread all around the world becoming unique in every country and iconic of entire populations. Ales and lagers are by far the most common beers; however, the combination of raw materials, manufacture techniques and aroma profiles are almost infinite, so it is not surprising to notice that there is a large amount of different beer styles, each of them with unique characteristics. Nowadays, diversification is becoming increasingly important in the brewing market and the brewers are continuously interested in improving and extending the already wide range of products, especially in craft brewery. One of the major components that can have a deep impact on the final product is yeast, since it is able to convert carbohydrates in wort, especially maltose and maltotriose, into ethanol, carbon dioxide and other minor aroma-active compounds. Saccharomyces cerevisiae (top‐fermenting yeasts used to produce ales) and Saccharomyces pastorianus (cryotolerant bottom‐fermenting hybrids between S. cerevisiae and Saccharomyces eubayanus responsible for the fermentation of lagers) are most used in breweries. However, an increasing number of different yeast starter cultures are commercially available, to improve the production efficiency also at relative low temperatures and to obtain desirable and diversified aroma profiles avoiding undesired compounds. Four main genetic engineering-free trends are becoming popular in craft brewing yeast development: 1) the research for novel reservoirs as source of new performant S. cerevisiae yeasts; 2) the creation of synthetic hybrids between S. cerevisiae and Saccharomyces non-cerevisiae in order to mimic lager yeasts by expanding their genetic background; 3) the exploitation of evolutionary engineering approaches; 4) the usage of non-Saccharomyces yeasts either in co-coculture or in sequential fermentation with S. cerevisiae. In the present work we summarized pro and contra of these approaches and provided an overview on the most recent advances on how brewing yeast genome evolved and domestication took place. Finally, we delineated how the correlations maps between genotypes and relevant brewing phenotypes can assist and further improve the search for novel craft beer starter yeasts.

This survey reports on the DNA identification and occurrence of Culex torrentium and Cx. pipiens s.s. in Belgium. These native disease vector mosquito species are morphologically difficult to separate and the biotypes of Cx. pipiens s.s. are morphologically indistinguishable. Culex torrentium and Cx. pipiens s.s. were identified using the COI and ACE2 loci. We recorded 1,248 Cx. pipiens s.s. and 401 Cx. torrentium specimens from 24 locations in Belgium (collected between 2017 and 2019). Culex pipiens biotypes pipiens and molestus, and their hybrids, were differentiated by fragment size analysis of the CQ11 locus (956 pipiens and 227 molestus biotype specimens, 29 hybrids). Hybrids were observed at 13 out of 16 sympatric sites. These results confirm that both species are widespread in Belgium, but while Cx. torrentium revealed many COI haplotypes, Cx. pipiens s.s. showed only one abundant haplotype. This latter observation may either reflect a recent population-wide demographic or range expansion, or a recent bottleneck, possibly linked to a Wolbachia infection. Finally, new evidence is provided for the asymmetric but limited introgression of the molestus biotype into the pipiens biotype.