This study compares the action of different handpieces (turbine, high-speed electric handpiece and piezoelectric device) on surface roughness of enamel and dentin when using diamond-coated working tips and burs of the same grit size. Experiment was conducted on 15 extracted first molars from patients aged 45 to 60 years. The occlusal portion was removed using a diamond-coated water wheel and then refined with a 120-130 μm grit bur in order to obtain a flat surface with an adequate exposition of the dentin core. Each surface was divided into three portions and every portion was finished with one of the three tested instruments. Rotary burs and piezoelectric tips had the same grit size (60 μm) and load on handpiece during preparation never exceeded 150 g. Surface roughness parameters (Ra, Rsk, Rku) were recorded with an optical profilometer and SEM analysis of treated surfaces and working tips was conducted. Ra and Rsk differed significantly between enamel and dentin only after using turbine (p=0.004 and p=0.007, respectively). No significant differences were observed in Ra, Rsk, and Rku between enamel and dentin when using high-speed electric handpiece or piezoelectric device. Turbine produced higher Ra and Rsk values on dentin than the other devices, while no significant differences were found between piezoelectric handpiece and high-speed electric contra-angle on both substrates. Summarizing, the findings of the present study demonstrated that turbine generated rougher surfaces on dentin compared to the other handpieces. Moreover, the turbine produced more asymmetrical surface profiles on both enamel and dentin. However, it should be considered that these differences in roughness (Ra) were within the range of 0.25-0.30 μm: it is still unclear if these variations, although statistically significant, will influence final clinical outcomes.

An ultra-low power (ULP), power gated static random access memory (SRAM) is presented for Internet of Things (IoT) applications, which operates in sub-threshold voltage ranges from 300mV to 500mV. The proposed SRAM has tendency to operate in low supply voltages with high static and dynamic noise margins. The IoT application involves battery enabled low leakage memory architecture in subthreshold regime which has low power consumption. Therefore, to improve power consumption along with better cell stability, a power gated 10T SRAM is presented. The proposed cell uses a power gated p-MOS transistor to reduce the leakage power or static power in standby mode. Moreover, due to the schmitt triggering and read decoupling of 10T SRAM the static and dynamic behavior in read, write and standby mode has shown enhanced tolerance at different process, voltage and temperature (PVT) conditions. The proposed SRAM shows better results in terms of leakage power, read static noise margin (RSNM), write static noise margin (WSNM), write-ability or write trip point (WTP), read-write energy and dynamic read margin (DRM). Further, these parameters are observed at 8-Kilo bit (Kb) and compared with already existing SRAM architectures. It is observed that the leakage power is reduced by 1/81×, 1/75× of the conventional 6T (C6T) SRAM and read decoupled 8T (RD8T) SRAM, respectively at 300mV VDD. On the contrary, RSNM, WSNM, WTP and DRM values are improved by 3×, 2×, 11.11% and 31.8% as compared to C6T SRAM, respectively. Similarly, proposed 10T has 1.48×, 25% and 9.75% better RSNM, WSNM and WTP values as compared to RD8T SRAM, respectively at 300mV VDD.

Background. Restoring large defects with proximal caries extending below the cemento-enamel junction and cavity margins located beneath the gingival tissues represents a very common clinical situation. The aim of this article is to propose a clinical classification of the localization subgingival margins of cavity.Material and methods. Diagnosis is carried out by periodontal probe perpendicular to the long axis of the tooth in the deepest point of the cavity’s margin. To describe the localization subgingival margins of cavity we use exponent which value is equal to the distance (integer number expressed in millimeters) of the level of epithelial attachment to the margin of the cavity. Three periodontal examiners, with >10 years of periodontal practice, were required to attend a calibration session aimed at the validation of the proposed classification. Results. The intrarater and interrater agreement among the localization subgingival margins of cavity: for intrarater agreement ranged from 0.74 to 0.95 (almost perfect agreement), whereas interrater agreement ranged from 0.26 to 0.59 (moderate agreement).Conclusions. The classification the localization subgingival margins of cavity is useful for reaching a more precise diagnosis.

The influence of preoperative examination of oral squamous cell carcinoma (OSCC) mucosal surrounding by VELscope (Visually Enhanced Lesion Scope) on the radicality of surgical treatment of OSCC was the goal of this study.It is the first analysis of its kind with a total number of 122 patients suffering from OSCC with homogenous distribution of different tumor stages randomized into a study and a control group and enrolled in our study after meeting the inclusion criteria. The preoperative checkup by VELscope accompanied by the marking of the range of a loss of fluorescence in the study group was performed before the surgery. We have developed a unique mucosal tattoo marking technique for this purpose. The pathohistological results after surgical treatment, i.e. the margin status, were then compared. We achieved the pathological free margin (pFM) in 55 patients, the pathological close margin (pCM) in 6 cases and we encountered no case of the pathological positive margin (pPM) in the mucosal layer in the study group. In comparison, the control group results revealed pPM in 7 cases, pCM in 14 cases and pFM in 40 of all cases in the mucosal layer. This study proved that the preoperative autofluorescence evaluation of a tumor mucosal surrounding can enhance the ability to reach the pFM resection.

Longevity risk constitutes an important risk factor for life insurance companies and it can be managed through longevity-linked securities. The market of longevity-linked securities is at present far from being complete and does not allow to find a unique pricing measure. We propose a method to estimate the maximum market price of longevity risk depending on the risk margin implicit within the calculation of the technical provisions as defined by Solvency II. The maximum price of longevity risk is determined for a survivor forward (S-forward), an agreement between two counterparties to exchange at maturity a fixed survival-dependent payment for a payment depending on the realized survival of a given cohort of individuals. The maximum prices determined for the S-forwards can be used to price other longevity-linked securities, such as q-forwards. The Cairns-Blake-Dowd model is used to represent the evolution of mortality over time, that combined with the information on the risk margin, enables us to calculate upper limits for the risk-adjusted survival probabilities, the market price of longevity risk and the S-forward prices. Numerical results can be extended for the pricing of other longevity-linked securities.

Influence of the volute design parameters on the stable operating range and the performance of a centrifugal compressor was investigated experimentally for the following design conditions. The volute casing surface roughness was changed from 0 to 200 µm in five steps and tested. The axial distance between the casing and the diffuser cascades (clearance) was varied in five steps as C/b₂ = 1.2, 2.4%, 3.6%, 4.8%, and 6% relative to the impeller exit width. The radial distance from the impeller blade exit to the diffuser vane inlet in (vaneless space radius) in six steps as C/r₂ = 1.03, 1.05, 1.07, 1.09, 1.11, and 1. 13 relatives to the rotor outlet radius. The volute outlet geometry of a symmetric and tangent with different area ratios from 0.4 to 0.9. Finally, the compressor has been tested experimentally with different pinched vaned diffuser distances relative to the impeller exit width of bp/b2 =1, 0.98, 0.96, 0.94, 0.92, and 0.9. These testes were carried at different compressor operating conditions, and the time variations of the static pressure were recorded using five high-frequency response pressure transducers. A hot-wire anemometer is used to measure the compressor flow rate. The rotating stall and surge at the vaneless zone after the impeller exit can be detected by analyzing the fluctuations of pressure signals and the power spectrum density by using the Fast Fourier Transformation analysis. The experimental results indicated that the compressor with volute casing surface roughness of 100mm gives about 10.9% enhancements in the stable operating and 1% in pressure rise coefficient. The best axial distance between the diffuser vanes and the casing is 2.4% of the impeller blade height and the compressor in this design gives about 12.4% improvements in the stable working range. The compressor with radial vaneless distance of 1.056 gives improvements of about 16.6% in the surge margin, 2% in the pressure recovery and 4% in pressure rise coefficients. The compressor with a pinched diffuser of b/bp of 0.98 gives an improvement of 20.8% in surge point.

The ratio between blade height and chord, named aspect ratio (AR), plays an important role in compressor aerodynamic design. Once selected, it influences stage performance, blade losses, and the stage stability margin. The choice of the design AR involves both aerodynamic and mechanical considerations, and a reasonable aim is frequently to achieve a desired operating range while maximizing efficiency. For a fixed set of aerodynamic and geometric parameters there will be an optimal choice in AR that achieves a maximum efficiency. However, for a state-of-the-art aero-engine design optimality means multi-objective optimality, that is reaching the highest possible efficiency for a number of operating points while achieving a sufficient stability margin. To this end, the influence of the AR on the performance of the first rotor row of a multistage multi-objective high-speed compressor design is analyzed. A careful setup of the high-speed aerodynamic design problem allows the effect of the AR to be isolated. Close to the optimal AR, only a modest efficiency variation is observed, but a considerable change in compressor stability margin (SM) is noted. Decreasing the AR allows for an increasing efficiency, but at the expense of a reduced surge margin. This allows the designer to trade efficiency for stability. Increasing the AR, however, is shown to reduce both surge margin and efficiency, hence a distinct optimality in stability is observed for the analyzed rotor blade row. In this work, the optimality in surge margin with respect to AR is observed whereas a close to optimal efficiency. The predicted range from AR=1.10 to AR=1.64, is only indicative, considering that the definition of a multi-objective optimality requires balancing efficiency and surge margin and that the choice of balancing these two criteria requires making a design choice along a pareto optimal front.

Large amounts of gas hydrate are present in marine sediments offshore Taitao Peninsula, near the Chile Triple Junction. Here, marine sediments on the forearc contain carbon that is converted to methane in a zone of very high heat flow and intense rock deformation above the downgoing oceanic spreading ridge separating the Nazca and Antarctic plates. This regime enables vigorous fluid migration. Here we present an analysis of the spatial distribution, concentration, estimate of gas phases (gas hydrate and free gas) and geothermal gradients in the accretionary prism and forearc sediments offshore Taitao (45.5° - 47° S). Velocity analysis of Seismic Profile RC2901-751 indicates gas hydrate concentration values <10% of the total rock volume, and extremely high geothermal gradients (<190 °Ckm^-1). Gas hydrates are located in shallow sediments (90-280 meters below the seafloor). The large amount of hydrate and free gas estimated (7.21x10¹¹ m³ and 4.1x10¹⁰ m³, respectively), the high seismicity, the mechanically unstable nature of the sediments, and the anomalous geothermal conditions, set the stage for potential massive releases of methane to the ocean mainly through hydrate dissociation and/or migration directly to the seabed through faults. We conclude that the Chile Triple Junction is an important methane seepage area and should be the focus of novel geological and ecological research.

This study presents an exploration into identifying the interactions between ocean waves and the continental margin in the origination of double-frequency (DF, 0.1-0.5 Hz) microseisms recorded at 33 stations across East Coast of USA (ECUSA) during a ten-day period of ordinary ocean wave climate. Daily primary vibration directions are calculated in three frequency bands and projected as great circles passing through each station. In each band, the great circles from all stations exhibit largest spatial density primarily near the continental slope in the western North Atlantic Ocean. Generation mechanisms of three DF microseism events are explored by comparing temporal and spatial variations of the DF microseisms with the migration patterns of ocean wave fronts in Wavewatch III hindcasts. Correlation analyses are conducted by comparing the frequency compositions of and calculating the correlation coefficients between the DF microseisms and the ocean waves recorded at selected buoys. The observations and analyses lead to a hypothesis that the continental slope causes wave reflection, generating low frequency DF energy and that the continental shelf is where high frequency DF energy is mainly generated in ECUSA. The hypothesis is supported by the primary vibration directions being mainly perpendicular to the strike of the continental slope.

The present work focuses on fresh water signatures at the sediment-water interface (1 cm) using foraminiferal species in both austral winter and summer in eleven longitudinal transects on the Western South Atlantic continental margin between 27° and 37° S, at water depths of 11.7 to 250 m. Here we show that depth, salinity, temperature, oxygen, grain size (mud and sand percentage), suspended matter, organic matter, SiO₄, NO₂, and NO₃ in this order of importance are responsible for the distribution of foraminiferal species and thecamoebians. The presence of these microfossils indicate freshwater influx in four sectors over the continental shelf: Itajaí-Açu River, Laguna estuarine system, Patos Lagoon and RdlP (Rio de la Plata) will be explored further in detail. Our findings on freshwater signature on the continental shelf sediments through benthic species indicator are comparable to other continental systems worldwide, and a paleo record study would be useful for three South American countries (Brazil, Argentina and Uruguay). A freshwater signature in the continental shelf indicates deposition sites probably linked to anthropogenic impact since most of the pollutants and contaminants are dumped into water bodies that eventually reach and accumulate in the ocean. Therefore, the freshwater-related species on the continental shelf reflects exactly where the depositional sediment sites are, and where anthropogenic impacts accumulate. Foraminiferal microhabitat occupation within these zones is discussed in detail. And we conclude that together with the fauna, the abiotic parameters play an important role in determining the occurrence and degree of marine eutrophication induced by the input of polluted river waters, also showing possible anoxic environments on the shelf.

This study aimed to quantify the extent of heavy metal, non-metal and metalloid level of Campomanesia adamantium pulp obtained from area crossed by road of the high large vehicle traffic and intensive agriculture modern farm, and for monitoring the health risks associated with pulp human consumption. For this purpose, three spots located between this area, ripe fruits were collected in roadside, bush and margin-farm. Pulp samples were digested by microwave-assisted equipment, and mineral elements were quantified by ICP OES. The mineral elements average demonstrated no statistical difference observed between this pulp (p > 0.05). The heavy metals and metalloid concentrations that exceeded FAO/WHO standards are ordered Pb > As > Mo > Co > Ni > Mn > Cr. Therefore, among these metalloid and heavy metals, As, Pb and Cr were found higher in farm-margin > roadside > bush (1.5 × 10^-3, 1.1 × 10^-3 and 6.2 × 10^-4) respectively. Therefore, As is the most important metalloid with higher levels in farm-margin, roadside and bush (1.5 × 10^-3, 1.1 × 10^-3 and 6.2 × 10^-4 > 10^-6–10^-4 and 3.33, 2.30 and 1.34 > 1) respectively, to total cancer risk and hazard quotient, if 100 g daily of pulp are consumed.

Recently, hybrid logic circuits based on magnetic tunnel junctions (MTJs) have been widely investigated to realize zero standby power. However, such hybrid CMOS/MTJ logic circuits suffer from a severe sensing reliability due to the limited tunnel magnetoresistance ratio (TMR≤150%) of the MTJ and the large process variation in the deep sub-micrometer technology node. In this paper, a novel differential sensing amplifier (DSA) is proposed, in which two PMOS transistors are added to connect the discharging branches and evaluation branches. Owing to the positive feedback realized by these two added PMOS transistors, it can achieve a large sensing margin. By using an industrial CMOS 40 nm design kit and a physics-based MTJ compact model, hybrid CMOS/MTJ simulations have been performed to demonstrate its functionality and evaluate its performance. Simulation results show that it can achieve a smaller sensing error rate of 9% in comparison with the previously proposed DSAs with the TMR ratio of 100% and process variation of 10%, while maintaining almost the same sensing delay of 74.5 ps and sensing energy of 1.92 fJ/bit.

Using the World Bank Global Findex Database for 91 countries in 2014, 2017, and 2021, we examine whether fintech levels influence bank performance and whether fintech’s interaction with GDP per capita causes differential effects on bank performance globally. Since fintech levels were already very high for rich countries when the World Bank started providing fintech development statistics in 2014, we estimate AbFintech by regressing fintech levels on GDP per capita by year. AbFintech is the difference between the fintech level and its fitted values. Then, using multiple regression analyses, we investigate the impact of AbFintech on bank performance worldwide, focusing on the differential effects of AbFintech and GDP levels on bank performance. We find AbFintech significantly increases bank performance, primarily in less developed countries. Specifically, AbFintech increases banks’ ROA in the least developed countries and net interest margin in the 75th percentile countries. Also, AbFintech decreases the cost-to-income ratio in the 75th percentile countries, while it increases the ratio in the most developed countries. AbFintech does not affect the ratio of noninterest income to total income, regardless of the level of economic development.

A crop-weed simulation model is presented to compare and evaluate Integrated Weed Management (IWM) strategies. Specifically, the model was parameterized for soybean crops in competition with Euphorbia davidii Subils. We used both, weed and crop demographic data surveyed in agronomic fields of the central zone of the Buenos Aires province, Argentina, throughout two crop cycles (2011/2012 and 2013/2014). The proposed model underwent a calibration process and subsequent validation with 70/30 % data split respectively (N=37). Two annual-based and one multiannual-based case studies were simulated to demonstrate the performance of the model. Different IWM strategies were compared under both, operational and tactical planning horizons through the evaluation of different model outcomes (i.e. crop yield, interspecific competition, economic return, and environmental impact). Our case studies results suggest that the inclusion of cultural management practices could reduce weed interspecific competition by 46 to 97 % and weed seed production by 40 to 89%. An increment in both expected crop yield, by 6 to 20%, and annual gross margin, by 44 to 199 US$.ha-1, were obtained in silico for similar levels of environmental impact.

The open communication is an exigent need for future power system where the time delay is unavoidable. In order to secure the stability of the grid, the frequency must remain within its limited range which is achieved through the load frequency control. The load frequency control signals are transmitted through communication networks which induces time delay that could destabilize the power systems. So, in order to guarantee the stability the delay margin should be computed. In this paper, we present a new method for calculating the delay margin in load frequency control systems. The transcendental time delay characteristics equation is transformed to frequency dependant equation. The spectral radius is used to find the frequencies at which the roots crosses the imaginary axis. The crossing frequencies are determined through the sweeping test and the binary iteration algorithm. A one-area load frequency control system is chosen as case study. The effectiveness of the proposed method has been proved through comparing with the most recent published methods. The method shows its merit with less conservativeness and less computations. The PI controller gains are preferable to be chosen large to reduce the damping, however, the delay margin decreases with increasing the PI controller gains.

This paper analyses the health and performance of 12-stage axial compressor of the TV3-117VM/VMA turboshaft operated in a desert environment. The results of the dimensional control of 4,800 worn blades are analysed to model the wear process. Operational experience and numerical simulations are used to assess the effectiveness of an Inlet Particle Separator. Numerical modal analysis is performed to generate the Campbell diagram of worn blades and identify resonant blade vibration which can lead to high cycle fatigue (HCF). It is shown that the gradual loss of the stall margin over time determines the serviceability limits of compressor blades. Recommendations setting out go / no-go criteria are made to maintenance and repair organisations.

The Huayangchuan uranium deposit, located in the west of the Xiaoqinling belt on the southern margin of the North China Craton, is a polymetallic deposit dominated by U, Nb, Pb, and rare earth elements. The Huayangchuan uranium deposit, discovered in the 1950s, has long been known as a carbonatite-type uranium deposit. Recently, new geological work has found uranium mineralisation in many granitic pegmatite veins in the Huayangchuan deposit and adjacent areas. Here, we report a systematic investigation of the petrography, whole-rock geochemistry, zircon U-Pb ages, and in situ Lu-Hf isotopic characteristics of newly discovered U-rich granitic pegmatite veins in the west of Huayangchuan deposit. The petrological results showed that the lithology of the samples is equivalent to that of granite. The U-Pb ages of zircon were 1826.3 ± 7.9 and 1829 ± 11 Ma. Microscopically, the symbiotic characteristics of zircon, betafite, and uraninite exist in the intergranular fissures of K-feldspar and quartz, reflecting metallogenic phenomena in the rock formation process. Almost all whole-rock samples were rich in SiO2 (64.37–70.69 wt.%), total alkalis (K2O+Na2O = 8.50–10.30 wt.%), and Al2O3 (12.20–14.41 wt.%), but poor in Ti2O (0.23–0.73 wt.%), MgO (0.38–0.90 wt.%), P2O5 (0.14–0.83 wt.%), MnO (0.04–0.57 wt.%). Additionally, they showed enrichment of LILEs (such as Rb, Ba, Th, U, and K), depletion of HFSEs (such as Ta, Nb, P, Ti, and Hf), no alkaline dark minerals, and the characteristics are typical of intraplate A1-type granite. The A1-type granite displayed low zircon εHf(t) values (-19.42– -15.02) with zircon two-stage Hf model aged 3.10–2.76 Ga, indicating that the U-rich granitic pegmatite was derived predominantly from partial melting of the ancient continental crust (such as the early Taihua group formed in Archean-Neoarchean). Combined with the above results and regional geological data, the U-rich granitic pegmatite discovered in the Huayangchuan deposit was related to granite magma activity that formed in a post-collisional regime after the Luliang movement in the late Palaeoproterozoic. This study suggests that future uranium prospecting work in this area should focus on late Palaeoproterozoic U-rich granitic pegmatites.

As the largest accretionary orogen in the world, the Central Asian Orogenic Belt (CAOB) has continuous juvenile crustal growth in the Phanerozoic. The northern margin of the North China Craton(NCC) and its adjacent area is the eastern segment of the CAOB, and is a key area to study the geological evolution of Paleo-Asian Ocean (PAO). In the Permian, the west of the northern margin of NCC belongs to a post-collision extensional environment, and the east belongs to a subduction stage. But, As a connecting area, the Permian evolution of PAO in the middle of northern margin of NCC has not been systematically studied. In order to fill the blank and understand the temporal and spatial continuous evolution process of PAO, this paper focused on the Permian granitic rocks in the Chifeng area, zircon U-Pb dating and the geochemical analysis of the whole rock main and trace elements were conducted in order to build a granite chronological framework, discuss the genesis and tectonic background of the granite rocks as well as the magma-tectonic evolution history in the Chifeng area. Zircon U-Pb dating results of 8 samples are 269±1 Ma, 268±3 Ma, 260±4 Ma, 260±1 Ma, 260±1 Ma, 255±2 Ma, 254±2 Ma, 256±1Ma, which showed that the Permian granitic rocks had undergone three stages of emplacement: (1) The monzogranite and syenite (294-284 Ma); (2) The monzogranite (269-260Ma) and (3) The monzogranite and syenite (256-254Ma). The Middle Permian magmatism (269-260Ma) was represented by the monzogranite assemblages with different grain sizes. The geochemical characteristics showed that they were high-potassium calc-alkaline-potassium dossonite series of granites formed in compressional environment, indicating there was a collision between the Xing’an-Mongolian Orogenic Belt (XMOB) and the North China Craton (NCC). During the Late Permian-Early Triassic (256-248Ma), the granites in the Chifeng area are dominated by the A-type and I-type granites of high-potassium calc-alkaline series formed under an extensional environments, which constituted typical "bimodal" rock assemblage combined with the coeval basic rocks, suggesting the study area was in an extensional environment where the subducting slab is fragmented during the collision between the XMOB and the NCC. According to emplacement time and occurrence location, the plutons are interpreted to have been generated by the subduction-collision of the Paleo-Asian oceanic crust beneath the NCC. This study provides strong evidence for Permian tectonic evolution and the characterization of the eventual closure of the Paleo-Asian Ocean in the Chifeng City at the northern margin of the NCC.

The traditional approach of considering the probability distribution of rain attenuation leads to overdesign the power margin of data channels. We have first recalled a method, proposed in 2016, which with a small power margin, bandwidth expansion and variable symbol rate avoids overdesign and can transfer the same data volume as if the link were in clear–sky conditions. It is charaterized only by the link mean efficiency 0≤η≤1, suitably defined. It is usefull only if: (a) data must be downloaded also when it is raining; (b) real–time communication is not strictly required. We have applied it to the links of GeoSurf satellite constellations by simulating rain attenuation time series at 80 GHz (mm–wave) with the Synthetic Storm Technique, from rain-rate time series recorded on–site, at sites located in different climatic regions. The power margin to be implemented ranges from 2.0 dB to 7.4 dB – well within the current technology – regardless the instantaneous rain attenuation. The clear–sky bandwidth is expanded 1.75 to 2.80 times, not large per se, but it may challenge current technology if the clear–sky bandwidth is already large.

Individuals with Parkinson’s Disease (PD) are at an increased risk of falls due to associated motor symptoms and impaired postural control. Gait dysfunction, observed soon after diagnosis, leads to disability with disease progression. The purpose of this study was to determine if there were differences in dynamic postural control during self-paced walking and obstacle-crossing between persons with mild to moderate PD and healthy controls. Participants included nine individuals with mild to moderate PD (PD cohort) and nine age- and gender-matched controls (CON cohort). Anatomical marker trajectories and ground reaction forces were collected as participants walked along the pathway. Three successful representative right and left gait cycles were analyzed using Visual3D biomechanical software. Analyses, involving a mixed model ANOVA using R Statistical Software, examined spatiotemporal (ST) gait parameters for strides involving the leading and trailing limbs and dynamic balance variables, including COM - COP inclination angle, and the COP - COM M/L, COP - XCOM M/L, UMAX - XCOM M/L distances, at distinct points from the stance limb related to the leading and trailing legs. There were no differences between CON and PD for all ST gait parameters during obstacle crossing, except for a significantly reduced step length (p = 0.00489) for the PD group related to the trailing limb. However, there were significant main effects of Step and Condition interacting with Step for swing time, stance time, and step length. For both CON and PD groups the COP - COM , COP - XCOM , UMAX - XCOM metrics demonstrated that the COM was medial to the BOS from first double support, generally moving more medially through second double support for the stance limb during motion of the leading and trailing limbs. Event and Event interacting with Condition were significant for the COP - COM and COP - XCOM variables, while UMAX – XCOM was significant only for Event (p < 0.001). The PD group demonstrated significantly larger mean values for COP – COM M/L at first double support (p = 0.00435) and COP - XCOM M/L at second double support (p = 0.0158) for the second step. Our results suggest that the margin of stability may be useful in discerning dynamic postural control adaptations during walking and obstacle negotiation in persons with mild PD.

Based on the plate tectonic theory, using seismic, geology, and public literature data, the proto-type basins and lithofacies paleogeography during the main geological periods of the passive continental margin of East Africa are restored, and the architecture characteristics of the basins and the differences in sedimentary fillings are analyzed. Combined with the dissection of discovered oil and gas reservoirs, four types of hydrocarbon accumulation models are established, the favorable hydrocarbon accumulation combinations (plays), and the next exploration directions in this region are explored. The passive continental margin basins in East Africa experienced three proto-type stages: intracontinental aborted rift during the Late Carboniferous-Triassic Karoo period, intracontinental-intercontinental rift during the Jurassic period, and passive continental margin basin since the Cretaceous period. Affected by the difference in sedimentary filling thickness between the rift period and depression period, four types of passive continental margin basins are formed: rifted type, depressed type, faulted depression type, and reformed delta type. The maximum sedimentary thickness of the rifted basins during the rift period is greater than 3500 m, and that during the depression period is less than 4000 m, forming a "single-source structure type" hydrocarbon accumulation model. The exploration of rifted basins should focus on giant structural traps at the top of the rifted sequences. The maximum sedimentary thickness of the depressed basins during the depression period exceeds 4000 m, forming a "single-source fan group type" hydrocarbon accumulation model. The dominant exploration directions of depressed basins are sedimentary sand bodies and structural-lithologic traps during the depression and drift periods. The maximum sedimentary thickness of the faulted depression basins during the rift period is greater than 3500 m, and that during the depression period is greater than 4000 m, forming a "double-source and double-combination type" hydrocarbon accumulation model. The exploration of rifted basins should focus on giant slip-collapse-debris flow sedimentary sand bodies on the upper and middle slopes. In addition to the large sedimentary thickness of the early rift and the central depression, the delta thickness of the reformed delta basins during the late depression period since the Miocene is more than 4000 m, and four structural belts (growth fault, mud diapir, thrust fold, and foredeep gentle slope) were formed from onshore to offshore, forming a "three-source and multi-combination type" hydrocarbon accumulation model. All four structural belts can form giant oil and gas fields.

Unrecorded alcohol comprises all types of alcohol that is not registered in the jurisdiction where it is consumed. In some countries in Central and Eastern parts of Europe as well as the Balkan, the major amount of unrecorded alcohol consumption may derive from homeproduction of fruit spirits. Some studies found a high prevalence of lead and cadmium in such spirits. This article provides a quantitative comparative risk assessment using the margin of exposure (MOE) methodology for lead and cadmium, compared to ethanol, for unrecorded fruit spirits. For average concentration levels, the lowest MOE (0.8) was calculated for ethanol (alcohol itself). For lead, the MOE was 13 for moderate daily drinking and 0.9 for the worst case. For cadmium, the MOE was 1982 for moderate daily drinking and 113 for the worst case. The results of this study are consistent with previous comparative risk assessments that ethanol itself comprises by far the highest risk of all compounds in alcoholic beverages. Regarding the metal contaminants, the risk of cadmium appears negligible, however, lead may pose an additional health risk in heavy drinking circumstances. Strategies to avoid metal contamination in settings of artisanal homeproduction of spirits need to be developed.

The survival analysis of the Cancer Genome Atlas (TCGA) dataset is a well-known method to discover the gene expression-based prognostic biomarkers of head and neck squamous cell carcinoma (HNSCC). A cutoff point is usually used in survival analysis for the patients' dichotomization in the continuous gene expression. There is some optimization software for cutoff determination. However, the software's predetermined cutoffs are usually set at the median or quantiles of gene expression value to perform the analyses. There are also few clinicopathological features available on their pre-processed data sets. We applied an in-house workflow, including data retrieving and pre-processing, feature selection, sliding-window cutoff selection, Kaplan-Meier survival analysis, and Cox proportional hazard modeling for biomarker discovery. In our approach for the TCGA HNSCC cohort, we scanned human protein-coding genes to find optimal cutoff values. After adjustment with confounders, the clinical tumor stage and the surgical margin involvement are independent risk factors for patients' prognosis. According to the resulting tables with Bonferroni-adjusted P value under the optimal cutoff and the hazard ratio, three biomarker candidates, CAMK2N1, CALML5, and FCGBP, are significantly associated with the patients' overall survival. We validated this discovery by using the other independent HNSCC dataset (GSE65858). Thus, we suggest the transcriptomic analysis could help for biomarker discovery.