Genomic selection (GS) can accelerate variety improvement when training set (TS) size, and its relationship with the breeding set (BS) are optimized for prediction accuracies (PA) of genomic prediction (GP) models. Sixteen GP algorithms were run on phenotypic best linear unbiased predictors (BLUPs) and estimators (BLUEs) of resistance to both fall armyworm (FAW) and maize weevil (MW) in a tropical maize panel. For MW resistance, 37% of the panel was the TS, and BS was the remainder whilst for FAW, random-based training sets (RBTS) and pedigree-based training sets (PBTS) were designed. PAs achieved with BLUPs varied from 0.66 to 0.82 for MW resistance traits, and, for FAW resistance, 0.694 to 0.714 for RBTS of 37%, and 0.843 to 0.844 for RBTS of 85%, and, these were at least two-fold those from BLUEs. For PBTS, FAW resistance PAs were generally higher than those for RBTS, except for one dataset. GP models generally showed similar PAs across individual traits whilst the TS designation was determinant since a positive correlation (R=0.92***) between TS size and PAs was observed for RBTS and, for the PBTS, it was negative (R=0.44**). This study pioneers the use of GS for maize resistance to insect pests in sub-Saharan Africa.

Laportea bulbifera (Sieb. et Zucc.) Wedd. (L. bulbifera) is a significant plant belonging to the Laportea genus. It has been traditionally used in ethnomedicine to treat various conditions such as rheumatic arthralgia, fractures, falling injuries, nephritis dropsy, limb numbness, pruritus, fatigue-induced internal imbalances, and irregular menstruation. Modern pharmacological studies have confirmed its therapeutic potential, as it exhibits anti-inflammatory, immunosuppressive, analgesic, and anti-rheumatoid arthritis properties. In order to gather in-depth information on L. bulbifera, a comprehensive literature search was conducted using databases such as Web of Science, PubMed, ProQuest, and CNKI. This review aims to provide a comprehensive understanding of L. bulbifera by covering various aspects, including ethnomedicinal uses, geographical distribution, botanical description, phytochemistry, pharmacology, and quality control. By doing so, this review intends to lay a strong foundation and propose new research avenues for the exploration and development of potential applications of L. bulbifera. Thus far, a total of 189 compounds have been isolated and identified from L. bulbifera. These compounds include flavonoids, phenolics, nitrogen compounds, steroids, terpenoids, coumarins, phenylpropanoids, fatty acids and their derivatives, and other compounds. Notably, flavonoids and fatty acids in L. bulbifera have demonstrated remarkable antioxidant and anti-inflammatory properties. Furthermore, these compounds show promising potential in activities such as analgesia, hypoglycemia, and hypolipidemia, as well as toxicity. Despite the extensive fundamental studies conducted on L. bulbifera, further research is still needed to enhance our understanding of its credible mechanism of action and improve its quality control. This necessitates more comprehensive investigations to explore the specific material basis, uncover new mechanisms of action, and refine the quality control methods related to L. bulbifera. By doing so, we could contribute to the further development and utilization of this plant.

Patients undergoing dialysis through a permanent catheter often experience infection or malfunction. However, few studies have clarified the predictors of permanent catheter patency survival in patients undergoing hemodialysis. We assessed the relationship between parameters of body composition monitoring (BCM) determined before the initiation of dialysis and the patency survival of the permanent catheters inserted in 179 patients who commenced hemodialysis between January 14, 2020 and August 31, 2021. The relationships between permanent catheter patency at 6 weeks and BCM parameters, laboratory tests, age, sex, comorbidities, and medications at baseline were studied using Kaplan–Meier survival curves. Permanent catheter patency was observed to be superior at high extracellular-to-intracellular (ECW/ICW) ratio (P<0.005). After adjustment for covariates, the ECW/ICW ratio remained an independent factor associated with permanent catheter patency survival. When patients with non-patent catheters were subdivided into infection and malfunction groups, and the associations of BCM parameters were evaluated in those groups, the ECW/ICW ratio was not significantly associated with permanent catheter patency survival in the infection group (P = 0.327); instead, a significant association was found for the lean tissue index (P<0.001). In the malfunction group, the ECW/ICW ratio remained significantly associated with permanent catheter patency survival (P < 0.001).

This research assesses the classification of Arabic coffee into three primary variations (light, medium, and dark) using simulated data based on actual measurements of color information, antioxidant laboratory tests, and chemical composition tests. Two types of simulated data were generated, with the standard deviation of the measures varied. Multiple classifiers were used for classification. The findings demonstrate the use of color information in accurately distinguishing Arabic coffee types. The different CIE color values, as well as the excellent connection between color information and coffee classes, lead to flawless classification results. However, depending primarily on antioxidant information results in lower classification performance, with variability amongst classifiers due to increasing data complexity. Chemical composition information, on the other hand, possesses outstanding discriminatory strength, allowing faultless classification on its own. Certain characteristics, such as crude protein and crude fiber, show strong correlations and are critical in the classification of coffee types. Based on the findings, it is recommended to create a mobile application that uses image recognition to analyze coffee color while providing chemical composition information. End users, such as consumers, will be able to make informed judgments regarding their coffee preferences owing to this application.

Background & aims: Malnutrition in lung transplant (LT) candidates increases postoperative morbidity and mortality. Early diagnosis of malnutrition could attenuate adverse prognostic factors. This study aimed to assess the prevalence of nutritional risk and malnutrition using GLIM criteria in LT candidates and clinically characterize those with malnutrition. Methods: A prospective longitudinal study was conducted from 2000 to 2020 of LT candidates who underwent complete nutritional assessment (nutritional screening, anthropometry, bioelectrical impedance, blood laboratory tests and malnutrition diagnosis using GLIM criteria). Results: Obstructive diseases (45.6%), interstitial diseases (36.6%) and cystic fibrosis/non-cystic fibrosis bronchiectasis (15.4%) were the main conditions assessed for LT. Of the 1060 candidates evaluated, 10.6% were underweight according to BMI, 29% were at risk of malnutrition and 47% were diagnosed with malnutrition using GLIM criteria. Reduced muscle mass was the most frequent GLIM phenotypic criterion. Malnutrition was more prevalent in patients with cystic fibrosis/non-cystic fibrosis bronchiectasis (84.5%), obstructive (45.4%) and interstitial (31.3%) diseases. GLIM criteria detected some degree of malnutrition in all diseases requiring LT and identified patients with higher CRP levels and worse respiratory function, anthropometric measurements and visceral protein and lipid profiles. Conclusions: LT candidates present a high prevalence of malnutrition using the GLIM algorithm. GLIM criteria detected malnutrition in all diseases requiring LT and defined patients with worse clinical-analytical profiles.

Carbonization of a biopolymer (lignin) in self-propagating high-temperature synthesis (SHS) led to the production of 2D graphene structures. With the help of modern analytical methods (Raman spectroscopy, X-ray diffraction) and electron microscopy, the resulting product was confirmed to have a few-layer 2D graphene structure. The predicted photovoltaic properties of the resulting few-layer graphene were implemented for laser ignition of a model pyrotechnic composition based on porous silicon. A phenomenological model of the formation mechanism of 2D graphene structures under the conditions of the SHS process is proposed.

Hydrogels are water-absorbing polymers that can hydrate forage plants in the soil. The objec-tive was to evaluate the replacement of synthetic hydrogels derived from petroleum by biode-gradable hydrogels in Mombaça grass pastures (Megathyrsus maximum). The experimental treat-ments consisted of: No hydrogel (NH); Synthetic commercial hydrogel (CH), made from a syn-thetic polyacrylamide product; and Biodegradable test hydrogel (TH), obtained from cashew gum (Anacardium occidentale). The experimental design was randomized blocks with five replica-tions and three treatments. Morphogenesis, production, chemical and mineral composition of the Mombaça grass pasture were assessed. The data was subjected to analysis of variance and mean comparison by the Snott-Knott test at 5% probability. Leaf elongation rate was 42.3 mm day-1 in the TH treatment, which was higher (P<0.05) than NH (35.0 mm day-1). Green leaf mass yield was higher in TH in comparison to NH and CH. On the other hand, there was no effect of hydration on chemical composition. The mineral composition of Mombaça grass showed more Zn when TH was used. It can be concluded that biodegradable hydrogels can replace synthetic commercial hydrogels in pastures.

Traditional soil characterization methods are time consuming, laborious and invasive and do not allow long-term repeatability of measurements. The overall aim of this paper was to assess and model spatial variability of the soil in an olive grove in south Italy by using data from two sensors of different type: a multi-spectral on-board drone radiometer and a hyperspectral visible-near infrared-shortwave infrared (VIS-NIR-SWIR) reflectance radiometer as well as sample data, to arrive at a delineation of homogeneous areas. The hyperspectral data were processed using continuum removal methodology to obtain information about the content and composition of clay. Differently, the multispectral data were firstly upscaled to the support of soil data using geostatistics and taking into account change of support. Secondly, the two-sensor data were integrated with soil granulometric properties by using the multivariate geostatistical techniques of multi-collocated cokriging and factor cokriging, in order to achieve a more exhaustive and finer-scale soil characterisation. The paper shows the impact of change of support on the uncertainty of soil prediction that can have a significant effect on decision making in Precision Agriculture. Moreover, four regionalised factors at two different scales (two per each scale) were retained and mapped. Each factor provided a different delineation of the field with areas characterised by different granulometry and clay composition. The applied method is sufficiently flexible and could be applied to any number and type of sensors.

Siliceous sandstones used in Khmer temples such as the Prasat Basset, Wat Ek Phnom, Phnom Banan temples in Battambang Province, Phnom Chisor and Ta Prohm temples in Ta Keo Province, and Wat Nokor Bachey temple in Kampong Cham Province in Cambodia were investigated in this study. Chemical composition analyses and magnetic susceptibility measurements were conducted for the sandstone blocks used in these temples. Siliceous sandstone is a primary construction material in all investigated temples. Two types of siliceous sandstone, pale brown and red, were found. Pale brown siliceous sandstone was used for the construction of all the investigated temples. In contrast, red siliceous sandstone was found only in the Wat Ek Phnom, Prasat Basset, and Phnom Banan temples. It is suggested that the pale brown siliceous sandstone originated from the Phra Wihan Formation within the Khorat Group. Based on the chemical composition analysis, the pale brown siliceous sandstone in the Ta Prohm temple at Tonle Bati and the Wat Nokor Bachey temple may have been sourced from the lower level of the Phra Wihan Formation. In contrast, the pale brown siliceous sandstone used in the Prasat Basset, Wat Ek Phnom, and Phnom Banan temples was likely sourced from the upper level. The origin of the red siliceous sandstone is proposed to be from the Sao Khua Formation, which is situated above the Phra Wihan Formation.

Vit-106 is a promising zirconium-based alloy with high glass-forming ability and belongs to the so-called bulk metallic glasses (BMG). Workpieces with a size of around one centimeter in all three dimensions can be obtained from a BMG alloy by casting. However, further increasing the cast size decreases the cooling rate and thus induces crystallization. Selective laser melting (SLM) is a well-known technique to overcome the size limitations for BMGs because a workpiece is built by the addition of multiple melt portions where the cooling rate is kept above the critical one. Currently, BMG parts obtained by SLM suffer from partial crystallization. The present work studies the influence of SLM process parameters on partial crystallization of Vit-106 by metallography and the influence of the microstructure on mechanical properties by microhardness and wear resistance testing. Submicron crystalline inclusions are observed in an amorphous matrix of Vit-106 alloy obtained by SLM. The size and the concentration of the inclusions can be controlled by varying the laser scanning speed. It is shown that submicron crystalline inclusions formed in the amorphous matrix during SLM can favorably affect microhardness and wear resistance.

The main objective of this this cross-sectional study was to analyze the influence of lifestyle fac-tors (diet, physical activity, sleep), which can affect the concentrations of fecal short-chain fatty acids (SCFAs) and SCFAs potential role in modulating cardiometabolic disease risk by interact-ing with biochemical and body composition parameters. The study comprised 77 healthy, non-obese individuals, aged 30-45 years who were assessed in the light of SCFAs concentration in stool, diet, physical activity level and sleep duration. Moreover, body composition measurement and patients’ biochemical parameters were included in the analysis. We have indicated a signifi-cant negative correlation between several SCFAs [especially acetic acid (AA), isobutyric acid (IBA), butyric acid (BA), isovaleric acid (IVA) and valeric acid (VA)] with BMI, VAT/SAT ratio (visceral to subcutaneous fat ratio) and percentage of fat mass in a group of females enrolled in the study as well as with waist circumference (WC) in case of both sexes included in the study. Moreover, the results of our study acknowledged the importance of a diet in shaping SCFAs pro-file - we noticed the significant negative associations between energy and fat intake and some SCFAs in males [IBA, IVA, VA, isocaproic acid (ICA)]. In terms of fiber intake, we noticed elevat-ed concentrations of vast majority of SCFAs and amount of SCFAs in total in case of both sexes included in the study. These strong correlations reflect the fact that diet shapes the composition of the gut microbiota and SCFAs (main microbial metabolites) are synthesized from dietary fiber. Furthermore, we noticed that in a group of women, the concentration of AA, propionic acid (PA) and ICA as well as the total concentration of SCFAs showed a significant positive association with their sleep duration. We concluded that SCFAs can have a potential role in modulating car-diometabolic disease risk by interacting with adiposity parameters and diet. In addition, this potential direct link between diet and SCFAs may at least partly contribute to sleep improvement.

By taking advantage of a stability criterion established recently, the critical temperature T_c is reckoned with help of the microscopic parameters, characterising the normal and superconducting electrons, namely the independent-electron band structure and a repulsive two-electron force. The emphasis is laid on the sharp T_c dependence upon electron concentration and inter-electron coupling, which might offer a practical route toward higher T_c values and help to understand why high-T_c compounds exhibit such remarkable properties.

Lung transplantation offers patients with end stage lung disease an opportunity for a better quality of life, but with limited organ availability it is paramount that selected patients have the best opportunity for successful outcomes. Nutrition plays a central role in post-surgical outcomes and historically, body mass index (BMI) has been used as the de facto method of assessing a lung transplant candidate’s nutritional status. Here we review the historical origins of BMI in lung transplantation, summarize the current BMI literature, and review studies of alternative/complementary body composition assessment tools, including lean psoas area, creatinine-height index, leptin, and dual x-ray absorptometry. These body composition measures quantify lean body mass versus fat mass and may provide a more comprehensive analysis of a patient’s nutritional state than BMI alone.

Abstract: Agriculture uses plastic products for containers, packaging, tunnels, drip irrigation tub-ing, mulches. Large amounts of plastics are used as mulches on the soil surface for vegetable pro-duction (tomato, cucumber, watermelon, strawberry, vine) to reduce the weed competition, in-crease water and fertilizer use efficiency and enhance crop yield. Portugal uses around 4,500 t/year of polyethylene plastic to cover approximately 23,000 ha of agricultural land and only a small amount is recovered for recycling or secondary uses because of dirt with soil, vegetation, pesticide and fertilizers. Cleaning and decontaminating polyethylene mulch are costly and commercial technology is often not accessible nor economically viable in the current economic Portuguese situation. Most plastic mulch is composed of polyethylene that degrades slowly and produces a large quantity of residues in soil with negative impact in the environment. In the present study, the effects of long-term cultivation of blueberry using green 100% high density polyethylene mulch, in the south Portugal were evaluated for soil chemical and biological changes. High density green plastic mulch did not contaminate the topsoil with di(2-ethylhexyl) phthalate and heavy metals, buttotal nitrogen and organic carbon concentrations, electric conductivity and microbial activity were reduced in the planting row compared with bare soil, without mulching. Further-more, the presence of plastic mulch did not affect negatively the presence of nematodes, and the Rhabditida (bacterial feeders) increased in the planting and covered row.

We have investigated the interfacial dislocations in InxGa1–xN/GaN (0 ≤ x ≤ 0.20) heterostructures using diffraction contrast analysis in a transmission electron microscopy. The analysis indicate that the structural properties of the interface dislocations depend on the indium composition. For lower indium composition up to x = 0.09, we observed that the screw-type dislocations and dislocation half loops occurred at the interface even though the former do not contributes toward elastic relaxation of the misfit strain in the InGaN layer. With the increase of indium composition (0.13 ≤ x ≤ 0.17), in addition to the network of screw-type dislocations, edge-type misfit dislocations were found generated with their density gradually increasing. For higher indium composition (0.18 ≤ x ≤ 0.20), all the interfacial dislocations are transformed into a network of straight misfit dislocations along the <10-10> directions leading to partially relaxation of the InGaN epilayer. The presence of dislocation half loops may be explained by slip on the basal plane, the formation of misfit dislocations are attributed to punch-out mechanism.

Music-domain visual programming languages (VPLs) have shown to be Turing complete. However, the common lack of built-in flow control structures can obstruct using VPLs implementing general-purpose algorithms, which harms the direct use of algorithms and algorithm theory in art creation processes using VPLs. In this article, we show how to systematically implement general-purpose algorithms in music-domain visual languages by using the Finite State Machines with Datapath computation model. The results expose a finite state machine and a set of internal state variables that walk paths whose speed can be controlled using a metronome ticks and whose path depends on the initial conditions of the algorithm. These elements can be further mapped to music elements according to the musician's intentions. We demonstrate this technique by implementing Euclid's Greatest Common Divider algorithm and using it to control high-level music elements in an implementation of Terry Riley's In C, and to control audio synthesis parameters in a FM synthesizer.

The Needleman-Wunsch process is a classic tool in bioinformatics, being a dynamic programming algorithm that performs a pairwise alignment of two input biological sequences, either protein or nucleic acid. A distance matrix between the tokens used in the sequences is also required as input. The distance matrix is used to generate a positional pairwise similarity matrix between the input sequences, which is in turn used to generate a dynamic programming matrix. The best path through the dynamic programming matrix is navigated using a traceback procedure that maximises similarity, inserting gaps as necessary. Needleman-Wunsch can align both nucleic acids or proteins, which use alphabets of size 4 and 20 tokens respectively. It can also be applied to any other kind of sequence where distance matrices can be specified. Here, we apply it to chains of Pousseur’s Scambi electronic music fragments, of which there are 32, and which Pousseur categorised by their sonic properties, thus permitting the consecutive construction of distance, similarity and dynamic programming matrices. Traceback through the dynamic programming matrix thus produces contrapuntal duet compositions in which two Scambi chains are played in the maximally euphonious manner, providing also an illustration of the principles of biological sequence alignment in sound.

Pomegranate juice (PJ) has total antioxidant capacity (TAC) which is reportedly higher compared to other common beverages. This short study aimed to evaluate the TAC of commercial PJ and pomegranate fruit in terms of a newly described iron (III) reducing antioxidant capacity (iRAC) and to compare with ABTS free radical quenching activity. Commercial PJ, freeze-dried pomegranate, and oven dried-pomegranate were analyzed. The total phenols content (TPC) was also assessed by the Folin-Ciocalteu method. The calibration results for iRAC were comparable to ABTS and Folin-Ciocalteu methods in terms of linearity (R2 > 0.99), sensitivity and precision. The TAC for PJ expressed as trolox equivalent antioxidant capacity (TEAC) was 33.4 ± 0.5 mM with the iRAC method and 36.3 ± 2.1 mM using the ABTS method. For dried pomegranates, TAC was 89–110 mmol/100 g or 76.0 ± 4.3 mmol/100 g using iRAC and ABTS methods, respectively. Freeze-dried pomegranate had 15% higher TAC compared with oven-dried pomegranate. In conclusion, pomegranate has high TAC as evaluated by the iRAC and ABTS methods, though variations occur due to the type of cultivar, geographic origin, processing and other factors. The study is relevant for attempts to refine food composition data for pomegranate and other functional foods.

The demand for dietary supplements containing collagen has been growing for years. The speciality and uniqueness of the dietary supplement (DS) examined in our study is the presence of L-arginine and hyaluronic acid alongside collagen and vitamin C. The individual mechanisms of action and physiological role of these compounds are understood, but they have not yet been tested in the combination and amounts of the dietary supplement used in this study. In this study, we investigated the effectiveness of the DS in elderly patients with musculoskeletal complaints. Somatometric, body composition, physiotherapy and laboratory tests were performed at the beginning and at the end of the study. The two-month study involved 30 people, randomly divided into two groups: a control group (CG) and an experimental group (EG). All subjects consumed 25 ml DS per day and EG members also participated in physiotherapy 3 times a week. Alongside the DS, blood lipid levels changed: LDL decreased, HDL increased, LDL/HDL ratio significantly decreased in both groups. For EG, the results improved more markedly. In 3 items of the body composition test, there was a significant improvement in both groups, which was attributed to the use of the dietary supplement. For the EG, there were significant changes in 5 additional test items, which we attribute to the addition of regular physical activity. Knee and hip joint range of motion (ROM) showed significant improvements in the study group, while in the CG the DS can cause significant improvements in joint range of motion in a passive condition as well.

Cloud Manufacturing (CMfg) has attracted lots of attention from scholars and practitioners. The purpose of quality of service (QoS)-aware manufacturing cloud service composition (MCSC), as one of the key issues in CMfg, is to combine different available manufacturing cloud services(MCSs) to generate an optimized MCSC that can meet diverse requirements of customers. However, many available MCS, deployed in the CMfg platform, have same function but different QoS attributes. It is a great challenge to achieve optimal MCSC with high QoS. In order to obtain better optimization results efficiently for the QoS-MCSC problems, a whale optimization algorithm(WOA) with adaptive weight, Lévy flight, and adaptive crossover strategies (ASWOA) is proposed. In the proposed ASWOA, the adaptive crossover inspired by the genetic algorithm is developed to balance the exploration and exploitation. The Lévy flight is designed to expand the search space of WOA and accelerate the convergence of WOA with adaptive crossover. The adaptive weight is developed to extend the search scale of the exploitation. Simulation and comparison experiments are conducted on different scale QoS-MCSC problems. The experimental results demonstrate that the proposed ASWOA outperforms other compared cutting-edge algorithms.

The paper investigates the possible use of a low strength domestic sand (D) (up to today useless – not considered as proppant source) of small particle sizes, instead to that of high strength imported commercial sand (C), as a prospective micro-proppant for low permeability reservoirs in Poland. There is need to develop national unconventional gas resources like tight gas, shale gas and coalbed methane. An important energy source of value and readily available in Poland is coal. The basins of this resource are large and bears low permeability coalbed methane reservoirs which needs to be developed to contribute to the energy security, economy and environmental needs of the country. These reservoirs need technological assistance such as hydraulic fracturing which makes use of proppants for development. Most of the commonly used proppants over the years for fracturing have been large grain size commercial proppants of high strength material content bought abroad. Investigated finer proppants are known to have the ability to penetrate narrow fracture networks to ensure effective high reservoir volume and conductivity for production. Results from presented laboratory research shows the D - proppant, which is cheaper and readily available, has the 3K class with low settling rates as a potential micro-proppant for effective transportation, enhancement of conductivity and production rate in the narrow fractures of low permeability reservoirs. Future using of domestic proppant will decrease stimulation cost and will have positive impact on the environment due to omitting long distance transportation from abroad.

A genome-wide association study (GWAS) was performed on a set of 260 lines which belong to three different bi-parental flax mapping populations. These lines were sequenced to an averaged genome coverage of 19× using the Illumina Hi-Seq platform. Phenotypic data for 11 seed yield and oil quality traits were collected in eight year/location environments. A total of 17,288 single nucleotide polymorphisms were identified, which explained more than 80% of the phenotypic variation for days to maturity (DTM), iodine value (IOD), palmitic (PAL), stearic, linoleic (LIO) and linolenic (LIN) acid contents. Twenty-three unique genomic regions associated with 33 QTL for the studied traits were detected, thereby validating four genomic regions previously identified. The 33 QTL explained 48-73% of the phenotypic variation for oil content, IOD, PAL, LIO and LIN but only 8-14% for plant height, DTM and seed yield. A genome-wide selective sweep scan for selection signatures detected 114 genomic regions that accounted for 7.82% of the flax pseudomolecule and overlapped with the 11 GWAS-detected genomic regions associated with 18 QTL for 11 traits. The results demonstrate the utility of GWAS combined with selection signatures for dissection of the genetic structure of traits and for pinpointing genomic regions for breeding improvement.

Patients with locally advanced head and neck squamous cell carcinoma (HNSCC) frequently require primary radiochemotherapy (RCT). Despite intensity-modulation, desired radiation-induced effects observed in HNSCC, may also be observed as side-effects in healthy tissue e.g. the sternocleidomastoideus muscle (SCM). These side-effects (e.g. tissue fibrosis) depend on the interval between completion of RCT and restaging-CT. For salvage surgery, the optimal time window for surgery is currently postulated between 6 and 12 weeks after completion of RCT. Thus, no extensive tissue fibrosis is to be expected. This interval is based on studies exploring surgical complications. Studies directly exploring radiation-induced changes of the SCM in HNSCC-patients are sparse. The present study quantifies tissue alterations in SCM and paravertebral musculature (PVM) after RCT applying radiomics to determine the optimal time window for salvage surgery. Three radiomic key parameters 1) volume, 2) mean positivity of pixels (MPP) and 3) uniformity were extracted with mint lesionTM in the staging-CTs and restaging-CTs of 98 HNSCC-patients. Of these, 25 were female, the mean age was 62 (±9.6) years and 80.9% were UICC Stage IV. The mean restaging-interval was 55 (±28; range29-229) days. Only the mean volume significantly decreased after RCT from 9.0 to 8.4 and 96.5 to 91.9 ml for SCM and PVM, respectively (both p=0.007, both Cohen’s d=0.28). In addition, the mean body mass index (BMI) decreases from 23.9 (±4.2) to 21.0 (±3.6) kg/m² (p<0.001); Cohen's d = 0.9). The mean BMI-decrease significantly correlated with the volume decrease for SCM (r=0.27; p=0.007) and PVM (r=0.41; p<0.001). If t-test p-values were adjusted for the BMI-decrease, no significant change in volumes for SCM and PVM was observed (both p>0.05). The present data supports the postulated optimal interval for salvage surgery of 6 to 12 weeks. Irrespective of the remaining risk-benefit ratio of salvage surgery, the risk of additional surgical complications due to fibrosis is not supported by the present observations.

The results of physico-chemical studies of individual fruit parts, including crusts, partitions, juice and seeds themselves, extracted from immature (green), unripe and mature fruits of three harvest periods are presented: 20.VII, 01.IX and 15.X. The analyses were carried out in 2019-20 during the period of active growth and ripening of fruits in the varieties Spring, Iridanaly, Guleisha pink and wild pomegranate from the Geokchay region (Azerbaijan) using standard and generally accepted physico-chemical methods. The ripe fruit (130-288 g) consisted of 60-113% of the peel (peel together with partitions), 53-140% of the juice and 17-85% of the seeds themselves. The edible part of the ripened fruits (53.85-73.2 of the total weight of the fruit) consisted of 58.54-78.65% juice and 21.35 -41.46% seeds, fresh juice contained 15.7-17.7% solids, including 12.04-13.84% sugar, 0.17-0.30% protein, 0.15—0.23% pectin, 0.30-0.40% ash and 0.26-0.57% total polyphenols. The concentrations of solids, protein, ash and total polyphenols in the seeds themselves, remaining after the extraction of juice from the grains of ripe fruits, were 50.0-58.2, 4.13-5.75, 0.60-1.0 and 0.08-0.32%, respectively. There were fewer total polyphenols, flavonoids, chlorogenic acids, catechins and leucoanthocyanins in ripe fruits, and more ascorbic acid, anthocyanins and proanthocyanidins than in unripe ones. The period from the second half of July to the beginning of September is the time of a real “boom” of common polyphenols.

The main objective of this communication is to describe the ‘Global Salt Cycle’. Giant salt accumulations are commonly found along continental margins of former rifts. The first stage in the accumulation process is saturation of newly formed oceanic crust with seawater. Final mobilisation and accumulation of the salts occurs during rifting, localised in the vicinity of relict subduction zones. Oceanic crust is created along the spreading ridges in the deep oceans of the Earth. It exchanges mass and energy with seawater in hydrothermal circulation cells that penetrate deep into the new and fractured crust. Water-rock interactions include the formation of hydrated and hydroxylated minerals, e.g., serpentinites and clay minerals. By incorporating hydroxyl groups and water in their crystal lattices, the salinity of remaining brines increases. Subduction of oceanic crust and serpentinised lithosphere transports water, hydrated minerals, and marine salts deep into the crust and mantle. Upon pressurisation and heating of the subducting slab, different parts of this water are expelled at different depths/temperatures. The resulting fluids will contain salts brought in with the slab, as well as new salts formed by water-rock interaction. The combination of elevated pressures and temperatures, water, salinity, and CO2, create permeability in the normally impermeable, peridotitic mantle, by altering the fluid-rock dihedral angles of mineral grains. This P/T-determined intergranular permeability allows ascent of saline fluids, under lithostatic pressure, within the mantle wedge, or the slab itself. The fluids produce a mechanically weakened and buoyant zone within the mantle wedge due to high pore pressure between mineral grains and reduced mantle density. During the lifetime of a subduction zone, a substantial accumulation of saline fluids within the mantle wedge and crust, is evident. Deep, fluid reservoirs accumulate between the subduction trench and the volcanic front. They may exist for hundreds of millions of years, even after the extinction of the subduction zone. Saline fluids may escape to the surface along deep faults, due to overfilling of available pores/fractures. Fluids within the mantle wedge may form rock melts or exist as supercritical, mineral rich fluids. The combination of reduced pressure due to rifting, and a saline and buoyant mantle, creates a mantle circulation that brings the accumulated, saline fluids, to crustal levels. Salts will therefore accumulate during initial stages of rifting as a result of massive fluid expulsion, phase change and boiling of mantle fluids. No extra energy is required to produce phase change and boiling. The result is formation of solid salts or dense brines/slurries invading fractured crustal rocks, or escaping to the surface/seabed. This process may take place both before and after the sea has invaded a continental rift.

The vast majority of patients with pancreatic ductal adenocarcinoma (PDAC) suffer cachexia. Although cachexia results from concurrent loss of adipose and muscle tissue, most studies focus on muscle alone. Emerging data demonstrate the prognostic value of fat loss in cachexia. Here we sought to identify the muscle and adipose gene profiles and pathways regulated in cachexia. Matched rectus abdominis muscle and subcutaneous adipose tissue were obtained at surgery from patients with benign conditions (n=11) and patients with PDAC (n=24). Self-reported weight loss and body composition measurements defined cachexia status. Gene profiling was done using Ion proton sequencing. Results were queried against external datasets for validation. 961 DE genes were identified from muscle and 2000 from adipose tissue, demonstrating greater response of adipose than muscle. In addition to known cachexia genes such as FOXO1, novel genes from muscle, including PPP1R8 and AEN correlated with cancer weight loss. All the adipose correlated genes including SCGN and EDR17 are novel for PDAC cachexia. Pathway analysis demonstrated shared pathways but largely non-overlapping genes in both tissues. Age related muscle loss predominantly had a distinct gene profiles compared to cachexia. This analysis of matched, externally validate gene expression points to novel targets in cachexia.