Evaluation of agronomic practices, genetic diversity and population structure of Moringa oleifera (Lam.) is crucial to its sustainable utilization to ensure food and nutritional security. Four agronomic practices of field preparation and soil analysis, regeneration, weeding and pruning, as well as harvesting, were adopted. Genetic diversity and population structure of 20 populations were evaluated using amplified fragment length polymorphism (AFLP) primer pairs (E-ACC/M-CAC and E-ACA/M-CAG). The effects of agronomic practices on leaf quantity production were evaluated using standard procedures. The physico-chemical and morphological data were analyzed using descriptive statistics, while genetic diversity, population structure, dendrogram reconstruction, and Principal Component Analysis (PCA) were analyzed from the AFLP genetic data. Significant effects (P ≤ 0.05) of agronomic practices on the quantity of leaf production were recorded across the accessions. The two primer pairs generated a total of 80 alleles with a mean major allele frequency of 0.0250. Gene diversity and polymorphic information content (PIC) values were high with a mean of 0.98 and 0.974, respectively. The Gst value of 0.0490 indicated that 5 % of the total genetic divergence was among the population while 95 % within the population. Dendrogram reconstruction with genetic distance ranging from 0.87 to 0.96 segregated the accessions into eleven clusters while PCA generated six cluster groups. Field preparation and physico-chemical soil properties, regeneration, weeding and pruning, and stand development, as well as harvesting, influenced the leaf yield and genetic diversity observed in this study. The genetic data revealed that some accessions were clustered along eco-geographical lines while others grouped disparately. Identified potential parent genotypes with valuable and desirable genetic traits can be exploited for commercial, breeding and conservation purposes to ensure sustainable utilization of the species in Nigeria.

Abstract: Current models in design of urban water management systems and their corresponding infrastructure using centralized designs have commonly failed from the perspective of cost effectiveness and inability to adapt to the future changes. These challenges are driving cities towards using decentralized systems. While there is great consensus on the benefits of decentralization; currently no methods exist which guide decision-makers to define the optimal boundaries of decentralized water systems. A new clustering methodology and tool to decentralize water supply systems (WSS) into small and adaptable units is presented. The tool includes two major components: (i) minimization of the distance from source to consumer by assigning demand to the closest water source, and (ii) maximization of the intra-cluster homogeneity by defining the cluster boundaries such that the variation in population density, land use, socio-economic level, and topography within the cluster is minimized. The methodology and tool are applied to Arua Town in Uganda. Four random cluster scenarios and a centralized system were created and compared with the optimal clustered WSS. It was observed that the operational cost of the four cluster scenarios is up to 13.9 % higher than the optimal, and the centralized system is 26.6% higher than the optimal clustered WSS, consequently verifying the efficacy of the proposed method to determine an optimal cluster boundary for WSS. In addition, optimal homogeneous clusters improve efficiency by encouraging reuse of wastewater and stormwater within a cluster and by minimizing leakage through reduced pressure variations.

A cosmological model was developed using the equation of state of photon gas, as well as cosmic time. The primary objective of this model is to see if determining the observed rotation speed of galactic matter is possible, without using dark matter (halo) as a parameter. To do so, a numerical application of the evolution of variables in accordance with cosmic time and a new state equation was developed to determine precise, realistic values for a number of cosmological parameters, such as energy of the universe , cosmological constant Λ, curvature of space k, energy density , age of the universe etc. Some assumptions were put forth in order to solve these equations. The current version of the model partially explains several of the observed phenomena that raise questions. Numerical application of the model has yielded the following results, among others: Initially, during the Planck era, at the very beginning of Planck time, , the universe contained a single photon at Planck temperature Planck energy in the Planck volume. During the photon inflation phase (before characteristic time ~10^-9 ), the number of original photons (alphatons) increased at each unit of Planck time and geometrical progression ~n³, where n is the quotient of cosmic time over Planck time . Then, the primordial number of photons reached a maximum of N~10⁸⁹, where it remained constant. It's primordial photons (alphatons) are still present today and represents the essential of the energy contained in the universe via the cosmological constante . Such geometric growth in the number of photons can bring a solution to the horizon problem through exchange and a photon energy volume that is in phase with that of the the volume energy of the universe. The age of the universe in cosmic time that is in line with positive energy conservation (in terms of conventional thermodynamics) and the creation of proton, neutron, electron, and neutrino masses, is ~76 [Gy] (observed . The predicted total mass (p, n, e and n), based on the Maxwell-Juttner relativistic statistical distribution, is ~7x10⁵⁰ . The predicted cosmic neutrino mass is ≤ 8.69x10^-32 (≤ 48.7 ) if based on observations of SN1987A. The temperature variation of the cosmic microwave background (CMB), as measured by Planck, can be said to be partially due to energy variations in the universe (DU/U) during the primordial baryon synthesis (energy jump from the creation of protons and neutrons). In this model, what is usually referred to as dark energy actually corresponds to the energy of the universe that has not been converted to mass, and which acts on the mass created by the energy-mass equivalence principle and the cosmological gravity field, , associated with the cosmological constant, which is high during primordial formation of the galaxies (<1 [Gy]). A look at the Casimir effect makes it possible to estimate a minimum Casimir pressure and thus determine our possible relative position in the universe at cosmic time 0,1813 (t₀/t_W=13,8 /76,1 ). Therefore, from the observed age of 13,8 [Gy], we can derive a possible cosmic age of 76,1 [Gy]. That energy of the universe, when taken into consideration during the formation of the first galaxies (< 1 [Gy]), provides a relatively adequate explanation of the non-Keplerian rotation of galactic masses. Indeed, such residual, non-baryonic energy, when considered in Newton’s gravity equation, adds the term , which can partially explain, without recourse to dark matter, the rotations of some galaxies, such as M33, UGC12591, UGC2885, NGC3198, NGC253, DDO161, UDG44, the MW and the Coma cluster. Today, in the MW, that cosmological gravity force is in the order of 10²⁶ times smaller than the conventional gravity force. The model predicts an acceleration of the mass in the universe (q~ 0,986); the energy associated with curvature is the driving force behind the expansion of the universe, rather than the energy associated with the cosmological constant . An equation to determine expansion is obtained using the energy form of the Friedmann equation relative to Planck power and cosmic time or Planck force acting at the frontier of the universe moving at c. This constant Planck force, from unknown sources, acts everywhere to the expansion of the universe as a stretching effect on the volume. Finally, the model partly explains the value a₀ of the MOND theory. Indeed, a₀ is not a true constant, but depends on the cosmological constant at the time the great structures were formed (~1 [Gy]), as well as an adjustment of the typical mass and dimension of those great structures, such as galaxies. The constant a₀ is a different expression of the cosmological gravity force as expressed by the cosmological constant, Λ, acting through the energy-mass equivalent during the formation of the structures. It does not put in question the value of G.

The article provides detailed information about the new technologies based on cluster computing Hadoop and Apache Spark. The experimental task of processing logistic regression with the help of these technologies is considered. The findings on the comparison of the performance of cluster computing of Hadoop and Apache Spark are revealed and substantiated.

The driving force behind adopting the idea of ​​sustainable development are producers and retailers. Unfortunately, when preparing their product range for consumers, many of them still only pay attention to the size of the customers’ earnings, how often they shop and how much they buy when shopping. In consumer segmentation, sustainable values ​​that consumers apply when making their purchasing decisions are rarely taken into account. The aim of this article is to show that values ​​such as environmental protection, the ethical behaviour of producers, fair trade or maximising the utility function of consumption are so important in the purchasing process in the coffee market that they can be used as segmentation variables. The Polish coffee market was selected to carry out segmentation taking into account the consumers' sustainable values. The main source of the article is the results of a standardized online survey conducted on a nationwide sample of 800 coffee consumers in July 2018. Multi-dimensional analyses such as extrapolative factor analysis (EFA) and cluster analysis (CA) were used to describe the obtained results. As a result, six segments of coffee consumers were identified and described: “responsible, aspiring to be connoisseurs”, “loyal coffee enthusiasts”, “pragmatic users”, “coffee laypersons”, “sophisticated connoisseurs”, “consumerists, connoisseurs, but not at any price”. Among the identified segments, the sustainable consumption values ​​most often mentioned refer to "responsible, aspiring to be connoisseurs", and the least often - ”consumerists, connoisseurs, but not at any price”. The conclusions presented in the last part of the article may be used by manufacturing and trade enterprises, operating on the coffee market, in order to respond to the identified needs and expectations of consumers and by governmental and social organisations so as to determine the directions of pro-ecological education of consumers.

In this paper, several two-dimensional clustering scenarios are given. In those scenarios, soft partitioning clustering algorithms (Fuzzy C-means (FCM) and Possibilistic c-means (PCM)) are applied. Afterward, VAT is used to investigate the clustering tendency visually, and then in order of checking cluster validation, three types of indices (e.g., PC, DI, and DBI) were used. After observing the clustering algorithms, it was evident that each of them has its limitations; however, PCM is more robust to noise than FCM as in case of FCM a noise point has to be considered as a member of any of the cluster.

The Voronoi entropy is a mathematical tool for quantitative characterization of the orderliness of points distributed on a surface. The tool is useful to study various surface self-assembly processes. We provide the historical background, from Kepler and Descartes to our days, and discuss topological properties of the Voronoi tessellation, upon which the entropy concept is based, and its scaling properties, known as the Lewis and Aboav-Weaire laws. The Voronoi entropy has been successfully applied to recently discovered self-assembled structures, such as patterned micro-porous polymer surfaces obtained by the breath figure method and levitating ordered water micro-droplet clusters.

We have studied Juniperus oxycedrus subsp. badia in the central and southern Iberian Peninsula. Here, the macrobioclimate ranges from Mediterranean-pluviseasonal-oceanic and Mediterranean-pluviseasonal-continental, thermotype from thermomediterranean and supramediterranean. The relevés were taken following the Braun-Blanquet phytosociological methodology. A statistical treatment was applied to establish a separation among Juniperus communities. To understand the presence of Juniperus communities in territories dominated by species of the genus Quercus, we applied the formula of Thornthwaite to calculate potential evapotranspiration. The general cluster analysis clearly separates two groups of plant communities and separates the different associations in each group. All plant communities growing on rocky crests and in steeply extreme sloping areas are significantly influenced by the soil. The Ombroclimatic Index does not explain the presence of plant communities influenced by substrate: so, we propose a new Ombroedaphoxeric Index which explains the presence of the Juniperus communities in territories with a thermotype ranging from the thermo to the supramediterranean belt. The areas of distribution of Juniperus species are expanding due to the spread of rocky areas: this phenomenon causes a rise in edaphoxerophilous areas and a decrease in climatophilous one. We propose four new plant associations and with this update on their structures and floristic compositions, it is possible to make an efficient form of conservation in both territories studied (Spain and Portugal) with specific cross-border-cooperation projects.

El Niño is a quasi-periodic pattern of climate variability and extremes often associated with hazards and disease. While El Niño links to individual diseases have been examined, less is known about the cluster of multi-disease risk referred to as an ecosyndemic, which emerges during extreme events. The objective of this study was to explore a mapping approach to represent the spatial distribution of ecosyndemics in Piura, Peru at the district-level during the first few months of 1998. Using geographic information systems and multivariate analysis, two methodologies were employed to map disease overlap of 7 climate-sensitive diseases and construct an ecosyndemic index, which was then mapped and applied to another El Niño period as proof of concept. The main findings showed that many districts across Piura faced multi-disease risk over several weeks in the austral summer of 1998. The distribution of ecosyndemics were spatially clustered in western Piura among 11 districts. Furthermore, the ecosydemic index in 1998 when compared to 1983 showed a strong positive correlation, demonstrating the utility of the index. The study supports PAHO efforts to develop multi-disease based and interprogrammatic approaches to control and prevention, particularly for climate and poverty-related infections in Latin America and the Caribbean.

An important moment in the establishment of forestry seed orchards is the formation of their optimal composition, avoiding inbreeding depression in the outgoing seed material which occurs due to crossbreeding between closely related plus trees, the clones of which comprise the orchards. It is possible to minimize the negative effect of inbreeding by considering the hereditary aspect of the heterogeneous seed orchard material. The purpose of our work is to provide a comparative assessment of the formation and lignification of xylem in annual shoots of the plus trees of Scots pine. We investigated the formation and lignification of xylem in the annual shoots of the plus trees of Scots pine (Pinus sylvestris L.), found in natural forests in the Nizhny Novgorod region of the Russian Federation. Their vegetative progeny were cultivated in the clone archive stationed in the same region. Analyzing the one-type of the 1-year shoots, the time that the shoots were cut from the branches corresponded to the presence of plants in the characteristic phenological phases of seasonal development. A histochemical study of xylem was conducted, using the qualitative reactions of phloroglucinol to lignin. The power of xylem development was estimated by counting, in the radial direction, the cell rows from the core to the cambium in the microscope’s field of view. A significant differentiation of plus trees was revealed in a complex of signs characterizing the level of xylem development and the degree of xylem cell lignification in the tissues of annual shoots. Phenotypic differences in the physiological state of plus trees appeared given a leveled ecological background, indicating their genotypic determinism. This was confirmed by an analysis of variance. The share of the influence of differences between the proper plus trees was between 25.16% ± 8.91% and 53.98% ± 5.48% of the total phenotypic variance of the signs of the seasonal state of xylem. Factor analysis was used to reduce the number of considered indicators of xylem physiological state. The results allowed a cluster analysis to be carried out on the basis of the normalized values of the initial xylem features as well as the principal components derived from them. The association of plus trees was done on the basis of the similarity of the multidimensional estimates of xylem seasonal condition. The objects that were the most remote from the others were identified. This information provides a reasonable approach to the formation of an assortment of Scots pine seed orchards.

Accurate and fast traffic flow forecasting is vital in intelligent transportation system because many of the advanced features in intelligent transportation systems are based on it. However, existing methods have poor performance regarding accuracy and computational efficiency in long-term traffic flow forecasting under big data. Hence, we propose an improved Long short-term memory (LSTM) Network and its cluster computing implementation in this paper to address the above challenge. We propose a singular point probability LSTM (SDLSTM) algorithm. The method discards the units of the network according to the singular point probability during the training process and amends the SDLSTM by Autoregressive Integrated Moving Average Model (ARIMA) to achieve the accurate prediction of 24-hour traffic flow data. Furthermore, the paper designs a scheme for implementing this method through cluster computing to shorten the calculation time and improve the system's operating speed. Theoretical analysis and experimental results show that SDLSTM gains a higher accuracy rate and better stability in the long-term traffic flow forecasting compared with previous methods.

Degussa P25 is a benchmark form of TiO₂ used worldwide in photocatalysis studies. Currently no such benchmark exists for co-catalysts, which are essential for many photocatalytic reactions. Here, we present the preparation of Pt nanocluster co-catalysts on TiO₂ using an unmodified commercial source and equipment that is commonly available. Transmission electron microscopy reveals that the procedure produces TiO₂ decorated with Pt atom and nanoclusters (1-5 atoms). Optical reflectance and X-ray diffraction measurements show that the procedure does not affect the TiO₂ polymorph or UV-Vis absorbance. Gas phase photocatalytic splitting of heavy water (D₂O) shows that the Pt nanocluster decorated TiO₂ outperforms Pt nanoparticle (produced by photodeposition) decorated TiO₂ in D₂ production. Pt nanoclusters, produced directly from a commercial source, with high co-catalyst activity are prime candidates to be used in benchmark photocatalytic reactions.

The patterns of food consumption in general and those of meat, in particular, are constantly changing. These changes are due not only to socio-economic and cultural trends that affect the whole society but also to the specific lifestyles of consumer groups. Due to the importance of consumer lifestyle, the objectives of this study were i) to identify the profiles of lamb meat consumers according to their orientation toward convenience, as defined by their eating and cooking habits; ii) to characterize these profiles according to their socio-economic characteristics and their preferences regarding the intrinsic and extrinsic quality signals of lamb meat; and iii) to analyze the willingness to pay for lamb confit. In this study, four types of consumers have been differentiated according to their lifestyles related to lamb consumption. These groups, due to their characteristics, could be called "Gourmet", "Disinterested", "Conservative" and "Basic". The Gourmet group has characteristics that make it especially interesting to market a product such as lamb confit; however, this group is unaware of this product. Therefore, a possible strategy to expand the commercialization of light lamb and the confit product would be guided marketing to this niche market.

Forest certification is considered a viable market-based policy instrument to promote forest sustainability. It has an important role of play in meeting the objective of modern forestry development in China, which is to sustain ecological and environmental benefits of forests. To understand differences in attitudes, opinions, and interests in forest certification, this study segmented respondents of a landowner’s survey in Shandong, China based on their level of interest in participating in forest certification under different program requirements. Multivariate cluster analysis revealed three distinct groups: likely-, potential-, and unlikely-landowners. We further examined the heterogeneity of these groups in terms of their demographics, ownership characteristics, management objectives, and perceived benefits and challenges with adopting forest certification. The results suggested the necessity of differentiating landowners in formulating and designing specific motivation-based incentives and tailor outreach efforts and communication strategies to improve their interests in forest certification. Findings are useful and interesting to forest policymakers interested in promoting forest certification among landowners in China and other countries facing similar circumstances.

The article presents the methodology for classifying economic regions with regards to selected factors that characterize a region, such as: the economic structure of the region, and thus the share of individual sectors in the economy; employment; the dynamics of the development of individual sectors expressed as an increase or decrease in production value; the population density in the region and also the level of occupational safety. Cluster analysis, which is a method of multidimensional statistical analysis available in Statistica software, was used to solve the task. The proposed methodology was used to group Polish voivodships with regards to the speed of economic development and occupational safety in the construction industry. Data published by the Central Statistical Office was used for this purpose, such as the value of construction and assembly production, the number of people employed in the construction industry, the population of an individual region and the number of people injured in occupational accidents.

Nowadays, we live in a world in which people are facing with a lot of data that should be stored or displayed. One of the key methods to control and manage this data refers to grouping and classifying them in clusters. Today, clustering has a critical role in information retrieval methods for organizing large collections inside a few significant clusters. One of the main motivations for the use of clustering is to determine and reveal the hidden and inherent structure of a set of data. Ensemble clustering algorithms combine multiple clustering algorithms to finally reach an overall clustering system. Ensemble clustering methods by lack of information fusing utilize several primary partitions of data to find better ways. Since various clustering algorithms look at the different data points, they can produce various partitions from such data. It is possible to create a partition with high performance by combining the partitions obtained from different algorithms, even if the clusters to be very dense from each other. Most studies in this area have examined all the initial clusters. In this study, a new method is used in which the most sustainable clusters are utilized instead of all primary produced clusters. Consensus function based on co-association matrixes used to select more stable clusters. The most stable clusters selection method is done by cluster stability criterion based on F-measure. Optimization functions are used to optimize the obtained final clusters. The genetic algorithm is the optimizer used in this article to find the ultimate clusters participated in a consensus. Experimental results on several datasets show that the output of proposed method is various clusters with high stability.

As Heterogeneous Wireless Sensor Network (HWSN) fulfill the requirements of researchers in the design of real life application to resolve the issues of unattended problem. But, the main constraint face by researchers is energy source available with sensor nodes. To prolong the life of sensor nodes and hence HWSN, it is necessary to design energy efficient operational schemes. One of the most suitable routing scheme is clustering approach, which improves stability and hence enhances performance parameters of HWSN. A novel solution proposed in this article is to design energy efficient clustering protocol for HWSN, to enhance performance parameters by EECPEP-HWSN. Propose protocol is designed with three level nodes namely normal, advance and super node respectively. In clustering process, for selection of cluster head we consider three parameters available with sensor node at run time, i.e., initial energy, hop count and residual energy. This protocol enhance the energy efficiency of HWSN, it improves performance parameters in the form of enhance energy remain in the network, force to enhance stability period, prolong lifetime and hence higher throughput. It is been found that proposed protocol outperforms than LEACH, DEEC and SEP with about 188, 150 and 141 percent respectively.

State Forest Management Organizations (SFMOs) play a crucial role in the European forest sector, managing almost half the forests in the region. SFMOs are often managed for timber production only whereas, being publicly owned, they should play an important role in providing a vast range of public goods (e.g. soil protection, biodiversity conservation). Their management goals depend on the history and current conditions of the forest sector at a national level, as well as different challenges and the potential for development. Although there is a lack of knowledge about the current performance of SFMOs, there have been recent changes to their management goals and practices in response to the new demands expressed by society (e.g. transparency, social inclusion). The main purpose of this study is to analyse the current situation of SFMOs by clustering them according to indicators that reflect three pillars of the common understanding of sustainable forest management (SFM) concept. With the help of Principal Component Analysis (PCA), we grouped countries according to common characteristics of the forest sector at the national level. Results show three main clusters of SFMOs in Europe. The first cluster has rather small but commercially-oriented forestry unit together with other business activities and a strong focus on public services. The second sees itself as the protector of public interest, rather than commercially-oriented organisations. The third is mainly profit-seeking. The existence of diverse SFMO clusters shows the possibility of different approaches for SFM with a focus on different goals (e.g. profit gaining, public service delivery).

This paper aims to develop a low-cost, high-performance and high-reliability computing system to process large-scale data using common data mining algorithms in the Internet of Things computing. Considering the characteristics of IoT data processing, similar to mainstream high performance computing, we use a GPU cluster to achieve better IoT services. Firstly, we present an energy consumption calculation method (ECCM) based on WSN. Then, using the CUDA Programming model, we propose a Two-level Parallel Optimization Model (TLPOM) which exploits reasonable resource planning and common compiler optimization techniques to obtain the best blocks and threads configuration considering the resource constraints of each node. The key to this part is dynamic coupling Thread-Level Parallelism (TLP) and Instruction-Level Parallelism (ILP) to improve the performance of the algorithms without additional energy consumption. Finally, combining the ECCM and the TLPOM, we use the Reliable GPU Cluster Architecture (RGCA) to obtain a high-reliability computing system considering the nodes’ diversity, algorithm characteristics, etc. The results show that the performance of the algorithms significantly increased by 34.1%, 33.96% and 24.07% for Fermi, Kepler and Maxwell on average with TLPOM and the RGCA ensures that our IoT computing system provides low-cost and high-reliability services.

The review is devoted to the physical, chemical and technological aspects of the breath-figures self-assembly process. Main stages of the process and the impact of the polymer architecture and physical parameters of the breath-figures self-assembly on the eventual pattern are covered. The review is focused on the hierarchy of spatial and temporal scales inherent for the breath-figures self-assembly. Multi-scale patterns arising from the process are addressed. The characteristic spatial lateral scales of patterns vary from nanometers to dozens of micrometers. The temporal scales of the process span from micro-seconds to seconds. The qualitative analysis performed in the paper demonstrates that the process is mainly governed by the interfacial phenomena, whereas the impact of inertia and gravity is negligible. Characterization and applications of polymer films manufactured with breath-figures self-assembly are discussed.

A radial basis function network (RBFN) method is proposed to reconstruct daily Sea surface temperatures (SSTs) with limited SST samples. For the purpose of evaluating the SSTs using this method, non-biased SST samples in the Pacific Ocean (10°N–30°N, 115°E–135°E) are selected when the tropical storm Hagibis arrived in June 2014, and these SST samples are obtained from the OISST products according to the distribution of AVHRR L2p SST and in-situ SST data. Furthermore, an improved nearest neighbor cluster (INNC) algorithm is designed to search the optimal hidden knots for RBFNs from both the SST samples and the background fields. Then the reconstructed SSTs from the RBFN method are compared with the results from the optimum interpolation (OI) method. The statistical results show that the RBFN method has a better performance of reconstructing SST than the OI method in the study, and the average RMSE is 0.48°C for the RBFN method, which is quite smaller than the value of 0.69°C for the OI method. Additionally, the RBFN methods with different basis functions and clustering algorithms are tested, and we discover that the INNC algorithm with multi-quadric function is quite suitable for the RBFN method to reconstruct SSTs when the SST samples are sparsely distributed.

The stepwise hydrogenation of the C=C bond and C=O group of acrolein on Au₃ and Au₅ model systems is investigated using the density functional theory(DFT) PW91 functional. Our results show that the C=C hydrogenation is more favorable than that of C=O bond on Au₃ with the barriers of the rate-determining step being 0.35 and 0.62 eV respectively. On the other hand, the C=O reduction is preferred over the hydrogenation of the C=C bond on Au₅. The corresponding barriers of the rate-determining steps are 0.45 and 0.54 eV, respectively. This demonstrated that the second hydrogenation step controls the reaction on both Au₃ and Au₅ for C=O and C=C hydrogenation and the C=O hydrogenation on Au₅ is preferred over the hydrogenation of the C=C bond, which is helpful to address the reactivity of small size-selected supported gold clusters.