This paper proposes a neural network which fuses the data received from a camera system on a gantry, to detect moving objects and calculate relative position and velocity of the vehicles traveling on a freeway, this information is used to estimate the traffic flow. To estimate the traffic flow at both microscopic and macroscopic view, this paper used YOLO v4 and DeepSORT for vehicle detection and tracking, then counting the number of vehicles pass through the freeway by drawing virtual lines and hot zones, also counting the velocity of each vehicles. The information is then pass to the traffic control center, in order to monitoring and control traffic flow on freeways, and analyzing freeway conditions.

With the breakthroughs and innovative developments in nanotechnology, research on the application of nanomedicine in cancer therapy has so far seen tremendous expansion and success. Intelligent stimulus-responsive nanocarriers are an emerging field of research and have great interest in cancer therapy owing to the fascinating properties such as excellent targeting function, high drug loading capacity, and targeted on-demand release properties. Responsive nanomaterials can be designed and constructed according to the dosing context and therapeutic needs, at the same time, activated by internal bio-stimuli (pH, redox, and enzymes) and/or external stimuli (ultrasound, light, temperature, and magnetic), respectively. What’s more, smart nanocarriers are also utilized for the precise and controllable release of antitumor drugs from cancer tissues and cells to achieve efficient diagnosis and treatment of tumors. Deeply investigated, responsive nanocarriers have attracted considerable attention due to their ability to release precisely at tumor-specific sites. Herein, we review the recent advances of novel stimuli-responsive nanocarriers in the field of cancer therapy. Finally, the challenges and application prospects of smart nanocarriers are further elaborately discussed.

Based on multi-source remote sensing data, scenario analysis, and model simulation, the Pareto optimal solutions for water supply, water purification (N retention), and carbon storage and sequestration services under different scenarios were sought by adjusting its land use structure. The results showed that. In Scenario 1(S1), the water supply service needs to increase by 86.820 to 11.211 billion cubic metres, the water purification (N retention) service needs to decrease by 11,400 to 11,700 tons, and the carbon storage and sequestration service need to decrease by 2.070 to 2.487 billion tons. In Scenario 2(S2), the water supply service needs to increase by 8.243–10.666 billion cubic metres, the water purification (N retention) service needs to decrease by 11,300–1.10 million tons, and the carbon storage and sequestration service needs to decrease by 2.033 to 2.466 billion tons. In Scenario 3 (S3), the water supply service needs to increase by 7.832–11.437 billion cubic metres, the water purification (N retention) service needs to decrease by 1.16–10,800 tons, and the carbon storage and sequestration service needs to decrease by 19.220 to 2.380 billion tons. After land use optimisation and adjustment, the S3 ecological land structure is complete and consistent with the vision of ecological protection and urban development in the study area, which is the optimal scenario. After optimising the S3 ecosystem service supply pattern, the water supply, water purification (N retention), and carbon storage and sequestration services could connect the western and eastern ecosystem service supply areas, balance the overall ecosystem service supply pattern of the study area and meet the demand for ecosystem services. The results can guide regional land planning and ecosystem service management optimisation.

Objective: To explore the application effect of Atropine injection combined with nursing intervention on the interventional treatment of PATENTS with ST-segment elevation myocardial infarction. Methods: A total of 60 patients with ST-segment elevation myocardial infarction treated in our hospital from January 2022 to January 2023 were selected as the research objects. According to different nursing methods, they were divided into conventional group (n = 30) and systematic group (n = 30), both groups were treated with percutaneous coronary intervention (PCI). The conventional group received routine nursing before and after operation. On the basis of routine nursing, systematic nursing cooperation was given in the system group. The time of opening infarct vessels, the incidence of total adverse reactions during interventional treatment, mortality, success rate of treatment, improvement of cardiac function and length of hospital stay were compared between the two groups. Results: The time of opening infarct vessel in system group was significantly better than that in routine group (P < 0.05). The total adverse reaction rate in system group was significantly lower than that in routine group (P < 0.05); The mortality of routine group was significantly higher than that of system group (P < 0.05). The success rate of system group was significantly higher than that of routine group (P < 0.05); The number of patients with improved cardiac function and length of hospital stay in system group were significantly better than those in routine group (P < 0.05). Conclusion: Good intraoperative cooperation and nursing is an important guarantee for patients with ST-segment elevation myocardial infarction, which can effectively reduce the occurrence of adverse reactions during interventional treatment, improve the success rate of treatment, and reduce the death of patients during interventional treatment.

The excessive vibration caused by crowds walking across footbridges has attracted great public concerns in the past few decades. This paper presents, from considering the dynamic characteristics of the bipedal crowd model, a new stability limit criterion based on the bipedal excitation model. The stability limit can be used to estimate the upper boundary of crowd size. In addition, the dynamic stable performances of a structure, under a certain walking crowd size, can be predicted by the stability criterion. This proposed mechanism provides an alternative comprehension how crowd excite the excessive sway motion with a large-span structure.

This paper presents a novel high-power rotary waveguide phase shifter based on circular polarizers specifically engineered for high-power microwave (HPM) applications. The phase shifter is capable of performing a precise 360° linear phase shift through rotation and consists of three parts: a linear polarized to left-handed circular polarized (LP-LHCP) mode converter, a left-handed to right-handed circular polarized (LH-RHCP) mode converter, and a linear polarized to right-handed circular polarized (LP-RHCP) mode converter. The paper analyzes the phase shifting principle, optimizes the three parts of the X-band rotary waveguide phase shifter, and conducts simulation studies on the entire phase shifter made of aluminum. The results show that the reflection is less than -20dB and the transmission efficiency is over 95% within 9.5GHz to 10.2GHz. The phase shift has a linear relationship with the rotation angle by a factor of two within this frequency range. Specifically, the phase shifter can achieve a linear phase shift of 360° when rotated from 0° to 180°, with a maximum deviation of less than 1.2°. Moreover, the power-handling capacity of the phase shifter in vacuum exceeds 242mW.

This work describes the catalytic performances of attapulgite/ZSM-5 extrudate in comparison to conventional alumina-bound ZSM-5 extrudate in toluene methylation. The novel attapulgite/ZSM-5 extrudate is prepared by using natural clay attapulgite as binder which introduces mobile alkaline species and macropores to the extrudate. In contrast to alumina-bound extrudate, this novel extrudate shows significantly higher para-selectivity and stability. By using characterization techniques, including in-situ XRD, SEM, NH3 temperature programmed desorption (TPD), thermogravimetric analysis and n-hexane/cyclohexane physical adsorption, the catalytic performance improvement of attapulgite/ZSM-5 extrudate is correlated with the neutralization of Brønsted acid sites by mobile alkaline species during calcination and reaction process. Moreover, a higher para-selectivity was obtained over attapulgite-bound modified ZSM-5 extrudate. The strategy of extruding ZSM-5 catalysts with attapulgite as binder is facile and universal. Such method paves a new way for preparation of shaped toluene methylation catalyst with enhanced para-selectivity and stability.

As the general acceptance of fiber-reinforced polymer (FRP) in the concrete construction industry continues to rise, it is increasingly imperative that the crack width of FRP reinforced concrete members of pavement and girder be predicted with good accuracy due to strengthening of RC pavement, slabs or beams structures using FRP is known to control crack width. However, no specific provisions are provided by most international design codes for predicting crack width in FRP reinforced concrete flexure members. In this paper, five formulas for predicting the crack width for FRP reinforced structures are derived from three common computational theories which including statistical method, comprehensive theory, and bond-slip theory. The formula of statistical method is simplest, but the parameters depend on much sample data. The comprehensive and slippage theory based on semi-empirical statistical crack spacing are obtained through the calculation of non-uniformity coefficient of strain. The comprehensive and slippage theory based on semi-empirical axial force balance are obtained through the calculation of tensile reinforcement factor. The comparative analysis of performance of five formulas is carried out. The results indicate that the formula from comprehensive theory based on semi-empirical statistical crack spacing is recommended for predicting the crack width of FRP reinforced concrete flexural structure.

Controlling the collective behavior of micro/nanomotors with ultrasound may enable new functionality in robotic, medicine and other engineering disciplines. Currently, various collective behaviors of nanomotors, such as assembly, reconfiguration and disassembly, have been explored by using acoustic fields with a fixed frequency, while regulating their collective behaviors by varying the ultrasound frequency still remains challenging. In this work, we design an ultrasound manipulation methodology allowing nanomotors to exhibit different collective behaviors by regulating the applied ultrasound frequency. This work has important implications for design of artificial actuated nanomotors and optimize their performances.

A novel fluorescent probe (C460@Tb-MOFs) was designed and synthesized through encapsulating the fluorescent dye 7-diethylamino-4-methyl coumarin into terbium-based metal-organic framework by a simple ultrasonic impregnation method. It is impressive that this dye-modified metal-organic framework can specifically detect styrene and temperature upon luminescence quenching. The sensing platform of this material exhibit great selectivity, fast response and good cyclability toward styrene detection. It is worth mentioning that the sensing process undergoes a distinct color change from blue to colourless, providing conditions for accurate visual detection of styrene liquid and gas. The significant fluorescence quenching mechanism of styrene toward C460@Tb-MOFs is explored in detail. Moreover, the dye-modified metal-organic framework can also achieve temperature sensing from 298 to 498 K with high relative sensitivity at 498 K. The preparation of functionalized MOFs composites by fluorescent dyes provides an effective strategy for the construction of sensors for multifunctional applications.

We present the generation and nonlinear frequency conversion of nanosecond cylindrical vector beams (CVBs) in two-mode fiber (TMF). Based on the polarized dependence vector mode coupling characteristic and the precise wavelength tunability of an acoustically-induced fiber grating (AIFG), the nanosecond cylindrical vector beams (CVBs, 1064 nm, 10 ns) is directly generated in a TMF with convenient switching characteristics between the radial and azimuthal vector beams. Furthermore, the stimulated Raman scattering (SRS) is produced based on the transmission of the nanosecond CVBs in the 100-meters long TMF, and the spatial intensity and polarization distributions characteristics the 1st-order Stokes shifted component is consistent with the nanosecond CVBs pump pulse. This work provides a method for achieving wavelength conversion of the CVBs in optical fiber.

Polygonum sibiricum is a traditional Chinese food and medicine homologues with multiple active ingredients and extensive bioactive effects. Polygonum sibiricum polysaccharides (PSP) are one of the main active ingredients with the antidepressant activity, meanwhile the specific mechanisms of its action are still unclear. Recently, it is recognized by researchers that microglia play a double-edged role in neuroinflammation and the transformation of M1/M2 microglial phenotypes appears to be a potential therapeutic strategy in depression. Therefore, the present study evaluated the effects of PSP on microglial M1/M2 polarization and the molecular mechanisms were studied based on the lipopolysaccharide (LPS)-induced BV2 cell activation model. The results show that PSP significantly inhibited NO and LDH release and reduced ROS levels in LPS-induced BV2 cells. PSP could significantly reduce the protein expression level of Iba-1, decreased the mRNA levels of TNF-, IL-1 and IL-6, increased the mRNA level of IL-10. PSP also significantly reduced the protein expression level of CD16/32 and increased it of CD206, reduced the mRNA level and fluorescence intensity of iNOS and increased them of Arg-1. However, PSP pretreatment reversed the alterations of BDNF/TrkB/CREB and Notch/Hes1 pathways in LPS-induced BV2 cells. These results suggested that PSP exerted the anti-inflammatory effects by inhibiting M1 phenotype polarization and promoting microglia polarization toward M2 phenotype, and its regulation of microglia M1/M2 polarization may be associated with modulating the BDNF/TrkB/CREB and Notch/Hes1 pathways.

Renal cell carcinoma (RCC) is the most common kidney cancer, accounting for approximately 80–90 % of all primary kidney cancer. Treatment for patients with advanced RCC remains unsatisfactory. Rare cancer stem cells (CSCs) are proposed to be responsible for failure of current treatment. Here, we investigate the effects of CBFA2T2 on CSCs regulation in RCC, as well as to elucidate the possible mechanisms. We showed that CBFA2T2 expression can significantly predict the survival of RCC patients. Functional assays showed that knocking-down of CBFA2T2 can inhibit cell migration and invasion in 786-O and A-498 cells in vitro, and reduce ALDH^high CSCs populations. Furthermore, CBFA2T2 expression is necessary for sphere-forming ability and cancer stem cells marker expression in RCC cell lines. Collectively, our data suggest that CBFA2T2 expression correlates with aggressive characteristics of RCC and CBFA2T2 is required for maintenance of “stemness” through regulation of stem cells factors, thereby highlighting CBFA2T2 as a potential therapeutic target for RCC treatment.

The grain filling rate (GFR) plays a crucial role in determining grain yield. However, the regulatory and molecular mechanism of grain filling rate (GFR) in foxtail millet remains unclear. In this study, we found the GFR of 'Changnong No.47' (CN47) was significantly higher at 14 days after flowering (DAF) and 21 DAF in comparison to 'Changsheng 13' (CS13). Furthermore, CN47 also exhibited higher thousand grain weight and yield than CS13. Therefore, we conducted transcriptomics and metabolomics to analyze the biological processes and functional genes associated with GFR during two stages of grain filling in both cultivars. A total of 765 differentially expressed genes (DEGs) and 246 differentially accumulated metabolites (DAMs) were identified at the 14 DAF stage, while at the 21 DAF stage, a total of 908 DEGs and 268 DAMs were identified. The integrated analysis of co-mapped DAMs and DEGs revealed enriched pathways, including flavonoid biosynthesis, plant hormone signal transduction, tyrosine metabolism, ATP-binding cassette (ABC) transporters, beta-alanine metabolism, as well as stilbenoid, diarylheptanoid and gingerol biosynthesis. In order to elucidate their potential functions in the context of GFR, we developed a gene-metabolite regulatory network for these metabolic pathways. Notably we found some genes associated with ABC transporters and plant hormone signal transduction pathway were implicated in auxin transport and signal transduction, highlighting the crucial role of auxin during grain filling. The results provide initial insights into the regulatory and molecular mechanisms underlying GFR in foxtail millet, as well as offer valuable genetic resources for further elucidation of GFR in future studies. The findings have established a theoretical basis for improving the efficiency of yield breeding in foxtail millet.