Gold- and MnO₂- nanozymes are well-known for their enzyme-like activity. In this regard, initially, gold- and MnO₂- nanozymes were synthesized by simple and green methods. Afterward, the kinetic studies were performed using the Michaelis–Menten model for both gold- and MnO₂- nanozymes. The kinetic parameters including K_m and V_max were calculated via the construction of the linear plot of Lineweaver–Burk for both nanozymes. The results showed a V_max and K_m of 185 nM sec^-1 and 47 nM sec^-1 for the gold- and MnO₂- nanozymes, in order. The ratio of V_max(gold)/V_max(MnO₂) was found to be about 4.0 which pointed that the catalytic efficiency of gold-nanozymes is 4.0-fold higher than the catalytic efficiency of MnO₂- nanozymes. The K_m value was found to be 0.72 mM and 1.6 mM for the as-prepared gold- and MnO₂- nanozymes, respectively, and the K_m of MnO₂-nanozymes is 2.2-fold higher than that of gold nanozymes. Since the Km shows the affinity of substrate for binding to nanozyme active nodes (lower K_m=higher affinity), it is consultable that the substrate affinity toward MnO₂-nanozymes is 2.2-fold lower than that of the gold-nanozymes. Considering the above results, the as-prepared gold nanozymes are very stronger peroxidase-like mimics than the metal oxide MnO₂-nanozymes.

MnO₂ nanoparticles are considered nanozymes with intrinsic peroxidase-like activity and there are several reports on their application in the field of nanozyme-based sensing and detection, however, up to now, there is no report on the investigation of their biochemical and kinetics properties toward enzyme-mediated oxidations. Hence, in this work, the MnO₂ nanozymes were synthesized and characterized with different characterization methods. Thereafter, their biochemical properties including pH stability, thermal stability, and salt stability as well as their kinetics perfromances were evaluated toward n-electron irreversible oxidation of 3,3’-diaminobezedine. The results showed that the as-prepared nanozymes reveal their maximal enzyme-like activity over a wide pH range of 3.0-6.0 at a temperature of 23-25 ℃ toward oxidation of 3,3’-diaminobezedine. Besides, the salt stability studies exhibited that the as-mentioned nanozymes can save their maximal activity over a wide range of high salt concentrations over 3-7 M of NaCl. Moreover, the kinetics studies revealed a K_m as low as 1.6 mM and a V_max as high as 47 nM sec^-1 for the MnO₂ nanozymes toward irreversible oxidation of DAB to produce the brown-colored polyDAB.

This paper focused on the oxidative leaching process of vanadium from vanadium-chromium reducing residue in alkaline medium with MnO₂. The effect of experimental parameters including reaction time, reaction temperature, dosage of MnO₂, dosage of NaOH, and liquid-to-solid ratio on the leaching efficiency of vanadium had been studied. The results indicated that MnO₂ was an efficient oxidant for leaching out of vanadium. The leaching efficiency of vanadium was up to 97.25% under optimal reaction conditions: reaction temperature of 90 ℃, reaction time of 60 min, dosage of MnO₂ at 50 wt.%, concentration of NaOH at 30 wt.% and liquid-to-solid at 5:1 mL/g.

As formally is known, nanozymes are the nanomaterials or nanoscale materials which reveal enzyme-like properties. These nanomaterilas can be utilzied instead of the natural enzymes for simulation of enzymatic reactions in harsh environmental conditions. Among different nanoscale enzyme-like materials, the majority of them reveal peroxidase-like activity, due to the high catalytic efficiency and stability of peroxidase-like nanozymes, they had been widely utilized for sensing and detection via constructing the colorimetric and fluorescence-based analytical and bioanalytical sensors. There are several high impact nanozymatic sensors which reported in the literature. Although the review articles published in this field, however, the current reviews focus on the introducing nanozyme field not description on the best articles published in this filed. Hence, this article aimed to present a brief introduction on the nanozyme-based chemistry with emphasizing on the historical overview of recent nanozymatic sensors. In this regard the best nanozymatic sensors which published over 2016-2023 were briefly described and overviewed.

In this paper, MnO2 nanowire (MnO2-NW) modified carbon paper (CP) electrode was developed as a novel electrochemical sensor for sensitive determination of tetrabromobisphenol A (TBBPA). MnO2 nanowire was prepared by a hydrothermal synthesis method, and the morphology and structure of MnO2 were characterized using scanning electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy. Electrochemical performance of TBBPA on MnO2-NW/CP was investigated by cyclic voltammetry, and the result confirmed that MnO2-NW/CP exhibited excellent sensitive for the determination of TBBPA due to the high specific surface area and good electrical conductivity of the nanowire-like MnO2. Moreover, the important electrochemical factors such as pH value, incubation time and modified material proportion were systematically studied to improve the determination sensitivity. The interferences from similar structure compounds on TBBPA have also been investigated. Under the optimal conditions, MnO2-NW/CP displayed the linear range of 70 500 nM for TBBPA with the detection limit of 3.1 nM, which was superior to some electrochemical methods in references. The work presents a novel and simple method for the determination of TBBPA.

Uncontrollable Zn dendrite formations and parasitic side reactions on Zn electrodes induce poor cycling stability and safety issues, preventing the large-scale commercialization of Zn-ion batteries. Herein, to achieve uniform Zn deposition and suppress side reactions, an electrospun ferroelectric poly(vinylidene fluoride-co-trifluoroethylene) copolymer, a [P(VDF-TrFE)] nanofiber layer, is introduced as an artificial solid-electrolyte interface on a Cu substrate acting as a current collector. The aligned molecular structure of β-P(VDF-TrFE) can effectively suppress localized current density on the Cu surface, lead to uniform Zn deposition, and suppress side reactions by preventing direct contact between electrodes and aqueous electrolytes. The half-cell configuration formed by the newly fabricated electrode can achieve an average coulombic efficiency of 99.2% over 300 cycles without short circuiting at a current density of 1 mA cm-2 and areal capacity of 1 mAh cm-2. Stable cycling stability is also maintained for 200 cycles at a current density of 0.5 A g-1 in a full-cell test using MnO2 as a cathode.

Considering higher stability and lower cost of nanozymes than native enzymes, the nanozymatic systems had been utilized for several practical application, especially for sensing and detection. Most of common nanozymatic sensors are single-nanozyme based systems, however, recently a new generation of nanozyme-based systems called “multinanozyme system’ was introduced by Hormozi Jangi et al. (2020). Since the first report of multinanozyme systems, several multinaozyme systems have been developed and utilized for highly sensitive and selective sensing aims. The main advantages of multinaozyme systems compared of common nanozymatic sensors are their impact on simultaneous enhancing selectivity and sensitivity of sensor in a well-designed detection process. Since, the principles of design and detection mechanism of this new generation is not well-described in the literature, the aim of this article is the fast review of the principles of design of this new generation of nanozyme-based sensing and detection.

In this contribution, time course studies were performed toward oxidation of different peroxidase substrates in the presence of silver nanozymes. In this regard, two common peroxidase substrates, TMB and DAB, were selected as model chromogens. The process of the oxidation reaction was probed by recording the absorbance of the colored products using UV-Vis spectrophotometer. Thereafter, the nanozymatic activity was calculated and used as an index for comparing the performance of the silver nanozymes against different substrates in a certain reaction time. The time course curves, revealed that the maximal activity of the silver nanozymes were achieved after a very short time of 3.0 min toward TMB oxidation while regarding DAB, the maximal activity was observed after 25.0 min which is 6.5-fold slower than that of the TMB oxidation. The difference between the DAB and TMB can be assigned to their different reaction pathways and different reactivity. In fact, the oxidation of DAB has occurred via n-electron irreversible pathway while the TMB oxidation has occurred through a simple 2-electon reversible pathway. Besides, DAB is a high stable and less relative compound compared of TMB, resulting different oxidation times, different affinity for binding to nanozyme active nodes which lead to different nanozymatic activities.

High-performance anodes are contributed to nanostructure of transition metal oxides for rechargeable Li-ion batteries (LIBs). In this work, we report the fabrication of high-performance anode materials for lithium-ion batteries, MnO2 nanotube directly grown into fabrics of carbon nanofibers, the MnO2/Carbon nanofibers (CNFs) were investigated by X-ray diffraction, scanning and transmission electron microscopies. When tested as the anode material in LIBs, the MnO2/CNFs exhibit superior performance and excellent long cycling performance with a reversible capacity of 835 mA h g-1 at 0.1 A g-1 after the 133 th cycle, a high initial specific capacity of 1094 mA h g-1 at a current density of 0.1 A g-1. The MnO2/CNFs demonstrates notable specific capacities, specifically, with a coulombic efficiency of 99.5 %, both stability and capacity are conspicuously above literature data. These impressive results indicate that MnO2/CNFs has great potential for high-energy and high-power energy storage applications.

It is well-known that the peroxidase enzyme catalyzes the oxidation of different substrates such as 3,3’,5,5’-thetramethylbenzidine, and 3,3’-diaminobenzidine, however, the affinity of different substrates to the enzyme and consequently and catalytic performances of the enzyme toward different substrates is not same, resulting in different kinetics indexes. As the BSA-gold nanozymes are considered artificial peroxidase enzymes, hence, the kinetics indexes of these nanozymes should also be varied by varying their substrate. Hence, in this work, a comparative study was performed on the kinetics performances of BSA-gold nanozymes for enzyme-mediated oxidations of 3,3’,5,5’-thetramethylbenzidine, and 3,3’-diaminobenzidine. The results showed that the Km value of BSA-gold nanozymes was 0.03 mM and 0.72 mM toward TMB and DAB, in order, to reveal the higher affinity (lower Km) of TMB for binding to nanozyme active nodes compared to its alternative substrate, DAB. In contrast, the Vmax was found to be 263 nM sec^-1 and 185 nM sec^-1 for nanozmye-mediated oxidation of TMB and DAB, respectively. The higher Vmax of the nanozyme-mediated oxidation of TMB revealed that the catalytic efficiency of BSA-Au nanozymes toward TMB oxidation is higher (about 1.5-fold) than that of the DAB oxidation. The difference between the kinetic indexes of TMB and DAB may be related to their different oxidation pathways and their different reactivity. In fact, the DAB oxidizes via an n-electron irreversible oxidation pathway to produce an indamine polymer. While TMB nanozyme-mediated oxidation has occurred upon a 2-electron reversible mechanism for the production of a cation radical. These different pathways resulted in different kinetic performances.

Iron oxide nanozymes are a form of nanomaterial with both superparamagnetic and enzyme-mimicking properties. Given the multifunctional nature of iron oxide nanozymes, it is attractive for creating iron oxide hybrid nanozymes through biomolecular modifications to imbue with auxillary properties. Such iron oxide hybrid nanozymes can be useful for rapid and cost-effective analysis of circulating tumor nucleic acids (ctNAs) in patient liquid biopsies during minimal residual disease (MRD) monitoring of cancer recurrence. Herein, the use of streptavidin-modified iron oxide hybrid nanozymes is reported for magnetic enrichment and bioelectrocatalytic sensing of three prostate cancer (PCa) ctRNA biomarkers with high detection specificity and sensitivity (10 copies) over an ultrabroad dynamic range (five orders of magnitude). Furthermore, the feasibility of ctRNA analysis for pre- and post-cancer treatment MRD monitoring is demonstrated using PCa urinary liquid biopsy samples.

The possibility of deep radiochemical purification of Li2CO3 has been examined in the frame of the purification program of AMoRE collaboration. In this experiment, commercial Li2CO3 was converted into LiNO3. Co-precipitation with inorganic salt-based carriers followed by membrane filtration and sorption using MDM inorganic sorbent methods were tested for the removal of alkaline-earth and transition metals, potassium, magnesium, aluminum, uranium, thorium, and radium. The calcium molybdate-based carrier was the most efficient for removing Th, U, and K. Subsequently, the radium, calcium, and barium contaminations were removed with MDM sorbent. After the impurities’ removal, the final Li2CO3 product was synthesized with NH4HCO3 sludge. The separation factors were derived by means of ICP-MS and HPGe analyses of the initial material, intermediate and final products. The study showed the optimum conditions of co-precipitation and sorption to reach a high yield and radiopurity of lithium carbonate used for low radioactive background experiments.