In the near future, the next generation of space travel will be revealed and people are going to live on multiple planets. As a result, because having enough oxygen for human survival is mandatory, in this research article, we are going to find out an appropriate method for producing oxygen on another planet by considering the accessible resources and their limitations.

In this research article, we are going to study the concept of the theory of relativity and after extracting the essential information, we will try to find a relation between the theory of relativity and the results we are obtaining through contemporary physics experiments. It has been investigated that traveling in time is not a dream anymore and time can pass at a different rate for some people.

We study the back-reaction of fermion fields on the kink solution in one space and one time dimension. We employ a variational procedure to determine an upper limit for the minimum of the total energy. This energy has three contributions: the classical kink energy, the energy of valence fermions and the fermion vacuum polarization energy. The latter arises from the interaction of the kink with the Dirac sea and is required for consistency of the semi-classical expansion for the fermions. Earlier studies only considered the valence part and observed a substantial back-reaction. This was reflected by a sizable distortion of the kink profile. We find that this distortion is strongly mitigated when the Dirac sea is properly accounted for. As a result the back-reaction merely produces a slight squeeze or stretch of the kink profile.

Introduction: Blood transfusion involves the transfer of blood from donors to patients. A blood transfusion is carried out every 2 seconds in the US. It is made up of about 29000 units of red blood cells and is transfused every day in the US. When blood transfusion is done correctly, it can result in the saving of lives and the improvement of healthcare. However, it may also lead to immediate, late, delayed, and chronic complications. No previous studies have been conducted in Qatar to address this issue. Methods: This is a cross-sectional study intended to determine the knowledge, attitude, and practice toward blood transfusion among healthcare providers at Hamad Medical Corporation (HMC), which is the principal healthcare provider in Qatar. Participants between 18 and 25 years of age were selected for the research study. A 10-item online questionnaire that people can fill out on their own will be used to get the data needed for the analysis and meet the study's goals. Results: the analysis has indicated that facing negative reactions after blood transfusion and being worried about getting affected by any infection have a small positive association, with the specific values coming in at r = 0.317, p = 0.000. Fever after blood transfusion and feeling like refusing blood transfusion have a significant and moderate positive correlation, with the specific values coming in at r = 0.630 and p = 0.000. Conclusion: The findings of this study have helped us figure out how healthcare providers feel, what they know, and what they do during a blood transfusion.

The aim of this paper is to at first evaluate the influence of three key parameters including weld current, weld time and electrode force on nugget diameter and tensile strength in resistance projection welding. Then, a 2-D axis-symmetric finite element model is developed to simulate the projection welding and predict the nugget diameter. Finally, the FEM results are compared to experimental data to verify the simulation model and simulated results. In the finite element model, the temperature-dependent material properties were taken into account.

Appropriate estimation of soil settlement is of significant importance since it directly influences the performance of building and infrastructures that are built on soil. In particular, the settlement of fine-grained soils is critical because of low permeability and continuous settlement with time. Coefficient of consolidation (C_c) is a key parameter to estimate settlement of fine-grained soil layers. However, estimation of this parameter is time consuming, needs skilled technicians, and specific equipment. In this study, C_c was estimated using several soil parameters such as liquid limit (LL), plastic limit (PL), and initial void ratio (e₀). Estimating such parameters in laboratory is straight forward and needs substantially less time and cost compared to conventional tests to estimate C_c such as oedometer test. This study presents a novel prediction model for C_c of fine-grained soils using gene-expression programming (GEP). GEP is a biologically inspired technique capable of offering closed-form solution for the optimal solution. A database consisted of 108 different data points was used to develop the model. A closed-form equation solution was derived to estimate C_c based on LL, PL, and e₀. The performance of developed GEP-based model was evaluated through coefficient of determination (R²), root mean squared error (RMSE), and mean average error (MAE). High R² and low error values indicated the descent performance of the model. Furthermore, the model was evaluated using the additional performance measures and met all the suggested criteria. Furthermore, the model had a better performance in terms of R², RMSE, and MAE compared to most of existing models. It is expected that the developed model will decrease the time and cost associate with determining C_c of fine-grained soils.Keywords: evolutionary model, gene-expression programming (GEP), prediction, soil compression index, estimation, soil engineering, soil informatics, civil engineering, machine learning, data science, big data, soft computing, deep learning, forecasting, subject classification codes, construction informatics, computational intelligence (CI), artificial intelligence (AI), estimation

Appropriate estimation of soil settlement is of significant importance since it directly influences the performance of building and infrastructures that are built on soil. In particular, the settlement of fine-grained soils is critical because of low permeability and continuous settlement with time. Coefficient of consolidation (Cc) is a key parameter to estimate settlement of fine-grained soil layers. However, estimation of this parameter is time consuming, needs skilled technicians, and specific equipment. In this study, Cc was estimated using several soil parameters such as liquid limit (LL), plastic limit (PL), and initial void ratio (e0). Estimating such parameters in laboratory is straight forward and needs substantially less time and cost compared to conventional tests to estimate Cc such as Oedometer test. This study presents a novel prediction model for Cc of fine-grained soils using gene-expression programming (GEP). GEP is a biologically inspired technique capable of offering closed-form solution for the optimal solution. A database consisted of 108 different data points was used to develop the model. A closed-form equation solution was derived to estimate Cc based on LL, PL, and e0. The performance of developed GEP-based model was evaluated through coefficient of determination (R2), root mean squared error (RMSE), and mean average error (MAE). High R2 and low error values indicated the descent performance of the model. Furthermore, the model was evaluated using the additional performance measures and met all the suggested criteria. Furthermore, the model had a better performance in terms of R2, RMSE, and MAE compared to most of existing models. It is expected that the developed model will decrease the time and cost associate with determining Cc of fine-grained soils.

Concrete, as one of the essential construction materials is responsible for a vast amount of emissions. Using recycled materials and gray water can considerably contribute to the sustainability aspect of concrete production. Thus, finding a proper replacement for fresh water, in the production of concrete, is significant. The usage of industrial wastewater, instead of water in the concrete can is considered in this paper. In this study, 450 concrete samples are produced with different amounts of wastewater. The mechanical parameters such as slump, compressive strength, water absorption, tensile strength, electrical resistivity, rapid freezing, half-cell potential, and appearance are investigated. The results showed that the usage of industrial wastewater does not significantly change the main characteristics of concrete. Although, increasing the concentration of the wastewater can decrease durability and strength features nonlinearly.

The most common index for representing structural condition of the pavement is the structural number. The current procedure for determining structural numbers involves utilizing falling weight deflectometer and ground-penetrating radar tests, recording pavement surface deflections, and analyzing recorded deflections by back-calculation manners. This procedure has two drawbacks: 1. falling weight deflectometer and ground-penetrating radar are expensive tests, 2. back-calculation ways has some inherent shortcomings compared to exact methods as they adopt a trial and error approach. In this study, three machine learning methods entitled Gaussian process regression, m5p model tree, and random forest used for the prediction of structural numbers in flexible pavements. Dataset of this paper is related to 759 flexible pavement sections at Semnan and Khuzestan provinces in Iran and includes “structural number” as output and “surface deflections and surface temperature” as inputs. The accuracy of results was examined based on three criteria of R, MAE, and RMSE. Among the methods employed in this paper, random forest is the most accurate as it yields the best values for above criteria (R=0.841, MAE=0.592, and RMSE=0.760). The proposed method does not require to use ground penetrating radar test, which in turn reduce costs and work difficulty. Using machine learning methods instead of back-calculation improves the calculation process quality and accuracy.

Design and advancement of the durable urban train infrastructures are of utmost importance for reliable mobility in the smart cities of the future. Given the importance of urban train lines, tunnels, and subway stations, these structures should be meticulously analyzed. In this research, two-dimensional modeling and analysis of the soil-structure mass of the Alan Dasht station of Mashhad Urban Train are studied. The two-dimensional modeling was conducted using Hashash’s method and displacement interaction. After calculating the free-field resonance and side distortion of the soil mass, this resonance was entered into PLAXIS finite element program, and finally, stress and displacement contours together with the bending moment, shear force and axial force curves of the structure were obtained.

Polycystic ovary syndrome (PCOS) is a common endocrine disorder in women, characterized by fluid-filled sacs in the ovaries and various symptoms including high androgen levels, endometrial irregularities, and cysts. While the cause of PCOS is unknown, it has been linked to genetic, endocrine, and metabolic factors, and there are several treatment options, including lifestyle modifications, medications, and surgery. Natural products, such as medicinal plants and fruits, are being explored as potential treatments for PCOS due to their bioactive compounds with pharmacological effects related to antioxidant, antimicrobial, anticancer, and antidiabetic properties. Some of these compounds improve insulin sensitivity, reduce inflammation, and enhance glucose metabolism, which is beneficial for women with PCOS. This review examined the effects of natural products on PCOS, including their effects on ovarian histological changes, blood glucose, sex hormones, and lipid profile, based on animal and human studies. This study suggests that the use of natural products as complementary medicine can be a promising resource for the development of effective therapeutics for PCOS, but that further research is needed to fully understand their benefits

Remaining service life (RSL) of pavement, as a sign of future pavement performance, has always received growing attention from pavement engineers. The RSL describes the time from the moment of pavement inspection until such a time when a major repair or reconstruction is required. The conventional approach to determining RSL involves using non-destructive tests. These tests, in addition to being costly, interfere with traffic flow and compromise users' safety. In this paper, surface distresses of pavement have been used to estimate the pavement’s RSL in order to eliminate the aforementioned problems and challenges. To implement the proposed theory, 105 flexible pavement segments were taken from Shahrood-Damghan Highway (Highway 44) in Iran. For each pavement segment, the type, severity, and extent of surface damage and pavement condition index (PCI) were determined. The pavement RSL was then estimated using non-destructive tests include Falling Weight Deflectometer (FWD) and Ground Penetrating Radar (GPR). After completing the dataset, the modeling was conducted to predict RSL using three techniques include Support Vector Regression (SVR), Support Vector Regression Optimized by Fruit Fly Optimization Algorithm (SVR-FOA), and Gene Expression Programming (GEP). All three techniques estimated the RSL of the pavement by selecting the PCI as input. The Correlation Coefficient (CC), Nash-Sutcliffe efficiency (NSE), Scattered Index (SI), and Willmott’s Index of agreement (WI) criteria were used to examine the performance of the three techniques adopted in this study. In the end, it was found that GEP with values of 0.874, 0.598, 0.601, and 0.807 for CC, SI, NSE, and WI criteria, respectively, had the highest accuracy in predicting the RSL of pavement.

Considering citizens' perceptions of their living environment is very helpful in making the right decisions for city planners who intend to build a sustainable society. Mental map analyses are widely used in understanding the level of perception of individuals regarding the surrounding environment. The present study introduces Aram Mental Map Analyzer (AMMA), an open-source program, which allows researchers to use special features and new analytical methods to receive outputs in numerical data and analytical maps with greater accuracy and speed. AMMA performance is contingent upon two principles of accuracy and complexity, the accuracy of the program is measured by Accuracy Placed Landmarks (APL) and General Orientation (GO), which respectively analyses the landmark placement accuracy and the main route mapping accuracy. Also, the complexity section is examined through two analyses Cell Percentage (CP) and General Structure (GS), which calculates the complexity of citizens’ perception of space based on the criteria derived from previous studies. AMMA examines all the dimensions and features of the graphic maps, and its outputs have a wide range of valid and differentiated information, which is tailored to the research and information subject matter that is required.

The construction of different roads, such as freeways, highways, major roads or minor roads must be accompanied by constant monitoring and evaluation of service delivery. Pavements are generally assessed by engineers in terms of the smoothness, surface condition, structural condition and surface safety. Pavement assessment is often conducted using the qualitative indices such as international roughness index (IRI), pavement condition index (PCI), structural condition index (SCI) and skid resistance value (SRV), which are used for smoothness assessment, surface condition assessment, structural condition assessment, and surface safety assessment, respectively. In this paper, Tehran-Qom Freeway in Iran has been selected as the case study and its smoothness and pavement surface conditions are assessed. At 2-km intervals, a 100-meter sample unit is selected in the slow-speed lane (totally, 118 sample units). In these sample units, the PCI is calculated after a visual inspection of the pavement and the recording of distresses. Then, in each sample unit, the average IRI is computed. The purpose of this study is to provide a method for estimating PCI based on IRI. The proposed theory was developed by Random Forest (RF), and Random Forest optimized by Genetic Algorithm (RF-GA) methods and these methods were validated using correlation coefficient (CC), scattered index (SI), and Willmott’s index of agreement (WI) criteria. The proposed method reduces costs, saves time and eliminates the safety risks.

Selecting the optimal activation function for training deep neural networks has always been challenging because it significantly impacts the neural network’s performance and training speed. At this point, researchers are more likely to employ RELU than other well-known activation functions. After RELU, researchers have proposed many activation functions to improve RELU. None of them was capable of surpassing RELU as their most significant rival. SWISH outperformed RELU in several challenging experiments like classification, object detection, and tracking. Replacing RELU units with SWISH, which improves performance in many tasks. This paper proposed a new activation function surpassing Google’s brain’s SWISH function, Which we named AIF. Experiments indicate that our proposed activation function outperforms SWISH in various tasks.

Alzheimer's disease is a neurological illness that worsens gradually. It is known as the most frequent cause of dementia. Moreover, Alzheimer's disease is a general term for memory loss and other cognitive impairments severe enough to disrupt daily life. The disease often grows in middle-aged and elderly people with the gradual loss of cognitive ability. Since the diagnosis of the illness is time consuming, a novel machine learning approach is proposed in this research to diagnose Alzheimer's levels based on Magnetic Resonance Imaging (MRI). More specifically, to provide distinct information for classification we have implemented the proposed method on a native MRI scans dataset containing three MRI channels; namely T1, T2, and, T2 tirm, which are shown in red, blue and green, respectively. The five middle layers of these three types of MRI scans are combined to form five RGB layers. In addition, we use a Convolutional Neural Network to classify each composed layer, and the final disease type is predicted using majority voting. finally, the F1-Score has been used to assess method performance, indicated that 92% of predictions of the proposed model were accurate.

When training deep neural networks tasks, the most popular choices are cross-entropy loss. On the other hand, in general speaking, a decent loss function can take on shapes that are considerably more flexible and ought to be adapted for different activities and datasets. In most of the classification tasks, generally if the true class is not correctly recognized by the network (top1), that class is placed among the five classes with the highest probability (top5). This shows that the network does not necessarily recognize the correct class with a low probability, but a class similar to it (such as 3 vs. 8 in mnist) assigns a higher probability and this causes a mistake in that task. Accordingly, we proposed a loss function deals with the error of class that the neural network incorrectly recognized as correct, in addition to the correct class error. We call our proposed loss as False Positive Loss (FPL), with the intention of viewing and designing loss functions not only through the utilization of true class but also through the utilization of the value of false positive classes. One of the core properties of our proposed loss is full adaptability, which makes False Positive Loss be fully capable of getting reformulated by using other widely used loss functions formulas based on the task or the need of the users. Extensive experimental results demonstrate that our suggested loss function outperforms other well-known losses on a variety of tasks and datasets. As can be observed, the performance of our False Positive Loss is superior to that of the cross-entropy loss when it comes to tasks involving 2D picture classification. We have compared our loss with cross entropy as the most common classification loss function on some models (such as ResNet-18, ResNet-50 and Efficientnet-V2) through classification known as a basic computer vision task. with both random or pre-trained initial weights. As a result, in some cases the models with our loss outperform the same tasks with cross entropy from the viewpoint of some metric (i.e. accuracy and FP). For example, the resnet-50 on cifar-10 dataset with random initialization indicated a top1 accuracy of 94.93 with cross entropy and 95.25 with our loss, while for top5 accuracy the results are 99.86 and 99.87, respectively.

Keywords: Kenaf; liquid cultivation; solid cultivation; in vitro propagation, life on land

Myocarditis is the form of an inflammation of the middle layer of the heart wall which is caused by a viral infection and can affect the heart muscle and its electrical system. It has remained as one of the most challenging diagnoses in cardiology. Myocardial is the prime cause of unexpected death in approximately 20% of adults less than 40 years of age. Cardiac MRI (CMR) has been considered as a noninvasive and golden standard diagnostic tool for suspected myocarditis and plays an indispensable role in diagnosing various cardiac diseases. However, the performance of CMR is heavily dependent on the clinical presentation and non-specific features such as chest pain, arrhythmia, and heart failure. Besides, other imaging factors like artifacts, technical errors, pulse sequence, acquisition parameters, contrast agent dose, and more importantly qualitatively visual interpretation can affect the result of the diagnosis. This paper introduces a new deep learning-based model called Convolutional Neural Network-Clustering (CNN-KCL) to diagnose the Myocarditis. The hybrid CNN-KCL method performs the early and accurate diagnosis of Myocarditis. To the best-of-our-knowledge, a Convolutional neural network has never been used before for the diagnosis of Myocarditis. In this study, we used 47 subjects to diagnose myocarditis patients from Tehran's Omid Hospital. The total number of data examined is 10425. Our results demonstrate that CNN-KCL achieves 92.3% in terms of diagnosis myocarditis prediction accuracy which is significantly better than those reported in previous studies.

To systematically investigate the epidemiology of breast cancer risk factors in Iran, we performed a systematic search via PubMed, Scopus, Web of Science and Persian databases for identifying studies published on breast cancer risk factors up to March 2019. Meta-analyses were done for risk factors reported in more than one study. We calculated odds ratios (ORs) with corresponding 95% confidence intervals (CIs) using a fixed/random-effects models.Thirty-nine studies entered into the meta-analysis. Pooling of ORs showed a significant harmful effect for risk factors including family history (OR: 1.80, 95%CI 1.47-2.12), HRT (OR: 5.48, 95%CI 0.84-1.74), ER positive (OR: 1.87, 95%CI 1.41-2.33), PR positive (OR: 1.84, 95%CI 1.38-2.29), stress condition (OR: 2.67, 95%CI 1.84-3.50), passive smokers (OR: 1.68, 95%CI 1.34-2.03), full-term pregnancy at age 30 (OR: 3.41, 95%CI 1.19-5.63), abortion (OR: 1.84, 95%CI 1.35-2.33), sweets consumption (OR: 1.71, 95%CI 1.32-2.11) and genotype Arg/Arg (crude OR: 1.59, 95%CI 1.07-2.10), whereas a significant protective effect for late menarche (OR: 0.58, 95%CI 0.32-0.83), nulliparity (OR: 0.68, 95%CI 0.39-0.96), 13 to 24 months of breastfeeding (OR: 0.68, 95%CI 0.46-0.90), daily exercise (OR: 0.59, 95%CI 0.44-0.73) and vegetable consumption (crude OR: 0.28, 95%CI 0.10-0.46).This study suggest that factors such as family history, HRT, ER and PR positive status, stress condition, passive smokers, late full-term pregnancy, abortion, sweets consumption and genotype Arg/Arg might increase risk of breast cancer development, whereas late menarche, nulliparity, 13-24 months breastfeeding, daily exercise and vegetable consumption had an inverse association with breast cancer development.

The use of Lactic Acid Bacteria (LAB) for probiotic enrichment of minimally processed fruit is a well-established practice in literature. In addition, several LAB demonstrated a strain-specific ability to control harmful microorganisms and decay agents, improving shelf-life, maintaining quality and promoting the safety of fruits and vegetables. Edible coatings can help modulate phenomena of gas exchange and water loss by fruits, representing protection from physical damage and spoilage phenomena linked to oxidation and the development of undesired microorganisms. At the same time, the coating can represent an innovative delivery matrix for the LAB strains of potential interest to improve safety and quality in the postharvest management of fruits. In this work, five Lactiplantibacillus plantarum strains, previously characterized for their probiotic and antifungal activity, have been incorporated into a sodium alginate coating to develop edible probiotic coatings with antifungal properties for table grapes cv. Italia. The transfer of probiotics and their survival were evaluated by comparing coated and uncoated table grapes during 14 days of cold storage at 4 °C. The alginate edible coating increased the number of probiotics transferred to the surface of the berries from about 5 to more than 7 Log CFU/g, with a crucial impact on the potential functional attributes of the final product. The ability of the functionalised coatings to counteract the decay development was evaluated on table grapes berries artificially contaminated with Aspergillus niger CECT 2805. A significant reduction of lesion diameter was observed in alginate coating with L. plantarum 11-A. The lesion diameter reduction was also accompanied by the reduction of the symptoms of infection, such as browning around the wound. These results suggest the application of selected strains of L. plantarum as promising bio-resources to enhance the overall value of ready-to-eat fruits and vegetables, particularly in combination with edible coating as a carrier matrix. While a strain-dependent effect was not detected with respect to the improvement of the number of cells in the edible coating, a variability depending on the biotype used was detected for the properties linked to biocontrol, suggesting that the inclusion in edible packaging may represent an innovative criterion in the selection of lactobacilli to be applied postharvest.