It is crucial to forecast the water demand accurately for supplying water efficiently and stably in a water supply system. In particular, accurately forecasting short-term water demand helps in saving energy and reducing operating costs. With the introduction of the Smart Water Grid (SWG) in a water supply system, the amount of water consumption is obtained in real time through an advanced metering infrastructure (AMI) sensor, which can be used for forecasting the short-term water demand. The models widely used for water demand forecasting include the autoregressive integrated moving average, radial basis function-artificial neural network, quantitative multi-model predictor plus, and long short-term memory. However, there is a lack of research on assessing the performance of models and forecasting the short-term water demand by applying the data on the amount of water consumption by purpose and the pipe diameter of an end-use level of the SWG demonstration plant in each demand forecasting model. Therefore, in this study, the short-term water demand was forecasted for each model using the data collected from the AMI, and the performance of each model was assessed. The Smart Water Grid Research Group installed ultrasonic-wave-type AMI sensors in the block 112 located in YeongJong Island, Incheon, and the actual data used for operating the SWG demonstration plant were adopted. The performance of the model was assessed by using the residual, root mean square error (RMSE), normalized root mean square error (NRMSE), Nash–Sutcliffe efficiency (NSE), and Pearson correlation coefficient (PCC) as indices. The water demand forecast was slightly underestimated in models that employed the assessment results based on the RMSE and NRMSE. Furthermore, the forecasting accuracy was low for the NSE due to a large number of negative values; the correlation between the observed and forecasted values of the PCC was not high, and it was difficult to forecast the peak amount of water consumption. Therefore, as the short-term water demand forecasting models using only time and the amount of water consumption have limitations in reflecting the characteristics of consumers, a water supply system can be managed more precisely if other factors (weather, customer behavior, etc.) influencing the water demand are applied.

The preservation of the authenticity of a building artefact is a responsible practice. On the other side, the need to save the building artefact from the natural and anthropic degradation, to ensure the structural reliability to the different actions, to define an efficient maintenance program are big challenges, that involves the cooperation of several professionals, responsible use of innovative techniques and materials that are nowadays available. This paper focuses on a specific design approach for the rehabilitation works of ancient constructions in archaeological sites. The proposed conceptual design approach implies different steps that allow the optimization of the design at an increasing level of knowledge on the existing structures and their materials. The design procedure on historical constructions generally includes the following steps: the collection of data, the structural identification, hazard, and vulnerability analysis, damage and risk analysis, a cost-benefit analysis, so only at the end of the process, the final design is achieved. In the archaeological area, some important design aspects cannot be defined before the execution work phase, since some elements could be revealed and identified during work execution, as a consequence, the final design has been often optimized after all this information has been acquired. A studied case in the archaeological site of Pompeii is herein presented to prove the efficiency of the proposed approach.

We are witnessing the severe third outbreak mediated by coronaviruses affecting global public health with unprecedented economic consequences. A better understanding of its phylogenetics, exploration of sequence features and mutational changes could unveil its genealogy to gain insights into the mechanism of transmission and development of possible interventions. Our comparative genomic analyses of >160 isolates of SARS-CoV-2 reveal phylogenetic kinship with other coronaviruses and emergence of evolutionary divergence in clinical isolates. t-SNE-based clustering revealed different clades but no continent specific clusters. Amino acid substitutions at RBD of spike protein provide possible reasons for rapid transmission. Few proteins specific to SARS-CoV-2 were identified which could have implications as therapeutic targets and diagnostic biomarkers. Virtual screening identified repurposed drugs, known nutraceuticals, for specific interventions. These phylogenetic observations reveal the ancestry and computational studies reveal the emergency measures to interject this emerging pathogen that pose threat to whole of mankind.

Increased nutrient withdrawal by rapidly expanding intensive cropping systems, in combination with imbalanced fertilization, is leading to potassium (K) depletion from agricultural soils in Asia. There is an urgent need to better understand the soil K-supplying capacity and K-use efficiency of crops to address this issue. Maize is increasingly being grown in rice-based systems in South Asia, particularly in Bangladesh and North East India. The high nutrient extraction, especially K, however, causes concerns for the sustainability of maize production systems in the region. The present study was designed to estimate, through a plant-based method, the magnitude, and variation in K-supplying capacity of a range of soils from the maize-growing areas and the K-use efficiency of maize in Bangladesh. Eighteen diverse soils were collected from several upazillas (or sub-districts) under 11 agro-ecological zones to examine their K-supplying capacity from the soil reserves and from K fertilization (@ 100 mg K kg-1 soil) for successive seven maize crops grown up to V10-V12 in pots inside a net house. A validation field experiment was conducted with five levels of K (0, 40, 80, 120 and 160 kg ha-1) and two fertilizer recommendations based on “Nutrient Expert for Maize-NEM” and “Maize Crop Manager-MCM” decision support tools (DSSs) in 12 farmers’ fields in Rangpur, Rajshahi and Comilla districts in Bangladesh. Grain yield and yield attributes of maize responded significantly (P < 0.001) to K fertilizer, with grain yield increase from 18 to 79% over control in all locations. Total K uptake by plants not receiving K fertilizer, considered as potential K-supplying capacity of the soil in the pot experiment, followed the order: Modhukhali >Mithapukur >Rangpur Sadar >Dinajpur Sadar >Jhinaidah Sadar >Gangachara >Binerpota >Tarash >Gopalpur >Daudkandi >Paba >Modhupur >Nawabganj Sadar >Shibganj >Birganj >Godagari >Barura >Durgapur. Likewise in the validation field experiment, the K-supplying capacity of soils was 83.5, 60.5 and 57.2 kg ha-1 in Rangpur, Rajshahi, and Comilla, respectively. Further, the order of K-supplying capacity for three sites was similar to the results from pot study confirming the applicability of results to other soils and maize-growing areas in Bangladesh and similar soils and areas across South Asia. Based on the results from pot and field experiments, we conclude that the site-specific K management using the fertilizer DSSs can be the better and more efficient K management strategy for maize.

Breast cancer is the most common cancer in women globally, often necessitating mastectomy and subsequent breast reconstruction. Silicone mammary implants (SMIs) play a pivotal role in breast reconstruction, yet their interaction with the host immune system and microbiome remains poorly understood. This study investigates the impact of SMI surface topography on host antimicrobial responses, wound proteome dynamics, and microbial colonization. Biological samples were col-lected from ten human patients undergoing breast reconstruction with SMIs. Mass spectrometry profiles were analyzed for acute and chronic wound proteomes, revealing a nuanced interplay between topography and antimicrobial respondseproteins. 16S rRNA sequencing assessed mi-crobiome dynamics, unveiling topography-specific variations in microbial composition. Surface topography alterations influenced wound proteome composition. Microbiome analysis revealed heightened diversity around rougher SMIs, emphasizing topography-dependent microbial inva-sion. In vitro experiments confirmed staphylococcal adhesion, growth, and biofilm formation on SMI surfaces, with increased texture correlating positively with bacterial colonization. This comprehensive investigation highlights the intricate interplay between SMI topography, wound proteome dynamics, and microbial transmission. The findings contribute to understanding host-microbe interactions on SMI surfaces, essential for optimizing clinical applications and minimizing complications in breast reconstruction.

Although the statistical methods of downscaling climate data have progressed significantly, the development of high-resolution precipitation products continues to be a challenge. This is especially true when interest centres on downscaling value over several study sites. In this paper , we report a new downscaling method termed the multi-site Climate Generative Adversarial Network (MSCliGAN), which can simulate annual maximum precipitation to the regional scale during the 1950-2010 period in different cities in Canada by using different AOGCM's from the Coupled Model Inter-Comparison Project 6 (CMIP6) as input. Auxiliary information provided to the downscaling model included topography and land-cover. The downscaling framework uses a convolution encoder-decoder U-net network to create a generative network and a convolution encoder network to create a critic network. An adversarial training strategy is used to train the model. The critic/discriminator used Wasserstein distance as a loss measure and on the other hand the generator is optimized using a summation of content loss on Nash-Shutcliff Model Efficiency (NS), structural loss on structural similarity index (SSIM), and adversarial loss Wasserstein distance. Downscaling results show that downscaling AOGCMs by incorporating topography and land-use/land-cover can produce spatially coherent fields close to observation over multiple-sites. We believe the model has sufficient downscaling potential in data sparse regions where climate change information is often urgently needed.

Background: Application of enhanced recovery after surgery principles decrease postoperative complications (POCs), length of stay (LOS), and readmissions. Pharmacoprophylaxis decreases morbidity, but the effect of specific regimens on clinical outcomes is unclear. Methods and Materials: Records of 476 randomly selected adult patients who underwent elective colorectal surgeries (ECRS) at 10 US hospitals were abstracted. Primary outcomes were surgical site infection (SSI), venous thromboembolism (VTE), postoperative nausea and vomiting (PONV), pain, and ileus rates. Secondary outcomes included LOS and 7- and 30-day readmission rates. Results: POC rates were SSI (3.4%), VTE (1.5%), PONV (47.9%), pain (58.1%), and ileus (16.1%). Cefazolin 2g/metronidazole 500mg and ertapenem 1g were associated with the shortest LOS; cefotetan 2g and cefoxitin 2g with the longest LOS. No SSI occurred with ertapenem and cefotetan. More Caucasians than Blacks received oral antibiotics before intravenous antibiotics without impact. Enoxaparin 40 mg subcutaneously daily was the most common inpatient and discharge VTE prophylaxis. All in-hospital VTEs occurred with unfractionated heparin. Most received rescue rather than around the clock antiemetics. Scopolamine patch, spinal opioids, and IV lidocaine continuous infusion were associated with lower PONV. Transversus abdominis plane block with long-acting local anesthetics, celecoxib, non-anesthetic ketamine bolus, ketorolac IV, lidocaine IV, and pregabalin were associated with lower in-hospital pain severity rate. Gabapentinoids and alvimopan were associated with lower ileus rate. Acetaminophen, alvimopan, famotidine, and lidocaine patch were associated with shorter LOS. Conclusions: Significant differences in pharmacotherapy regimens that may improve primary and secondary outcomes in ECRS were identified. Future research should identify latent pharmacotherapy variables that impact patient outcomes.

Labelling techniques such as electron paramagnetic resonance spectroscopy and single-molecule fluorescence resonance energy transfer, allow access to distances in the range of tens of angstroms, corresponding to the size of proteins and small to medium-sized protein complexes. Such measurements do not require long-range ordering and are therefore applicable to systems with partial disorder. Data from spin-label-based measurements can be processed into distance distributions that provide information about the extent of such disorder. Using such information in modelling presents several challenges, including a small number of restraints, the influence of the label itself on the measured distance and distribution width, and balancing the fitting quality of the long-range restraints with the fitting quality of other restraint subsets. Starting with general considerations about integrative and hybrid structural modelling, this review provides an overview of recent approaches to these problems and identifies where further progress is needed.

Buildings can generate heats which are mostly generated from the machinery using inside the buildings, and these heats generally released to the atmosphere. Buildings can also block the wind flow by their canopies and trap the heat by using low albedo materials. These causes pointedly contribute to urban heat island and greenhouse effects. Likewise, urban development and building construction in Cambodia are growing rapidly. The construction has been recognized as a key development sector while thousands of buildings are being built and have been operated in the main cities. However, those buildings mostly have not been considered to incorporate sustainability concepts while the major final energy consumers in the country are buildings. The buildings’ energy consumption is also projected to increase more than double until 2040. Hence, sustainable building promotion in Cambodia is necessary, and sustainable building criteria are completely required. This research aims to find out significant sustainable building criteria for Cambodia and focused on planning and design criteria because having proper planning and design is a smart start leading to achieving building sustainability in all stages. This research used the Delphi methods to validate the relevant sustainable building criteria available in the literature and then select the significant ones for Cambodia based on the Delphi consensus. The results showed that ninety-nine consensus planning and design criteria were found to be significant for sustainable buildings in Cambodia.

Illicit drug consumption is posing critical concerns in our society causing health issues, crime-related activities, and the disruption of border trade. The smuggling of illicit drugs urges the development of new tools for rapid on-site identification in cargos. Current methods used by law enforcement officers rely on presumptive color tests and portable spectroscopic techniques. However, these methods sometimes exhibit inaccurate results due to commonly used cutting agents, the colorful nature of the sample or because the drugs are smuggled (hidden or mixed) in common goods. Interestingly, electrochemical sensors can deal with these specific problems. Herein, an electrochemical device is presented that uses affordable screen-printed electrodes for the electrochemical profiling of illicit drugs by square-wave voltammetry (SWV). The identification of the illicit compound is based on the oxidation potential of the analyte. Hence, a library of electrochemical profiles is built upon the analysis of illicit drugs and common cutting agents. This library allows the design of a tailor-made script that enables the identification of each drug through a user-friendly interface (laptop or mobile phone). Importantly, the electrochemical test is compared by analyzing 48 confiscated samples with other portable devices based on Raman and FTIR spectroscopy as well as a laboratory standard method (i.e. gas chromatography – mass spectrometry). Overall, the electrochemical results obtained through the analysis of different samples from confiscated cargos at an end-user site, present a promising alternative to current methods, offering low-cost and rapid testing in the field.

Until recently, the classic approach to mineral exploration studies is to bring the field samples/drill cores collected during field studies to the laboratory followed by laborious analysis procedures to generate the analytical data. This is very expensive, time consuming and difficult for exploring vast areas. But rapid technological advances in field portable analytical instruments such as portable ultraviolet–visible and near-infrared spectrophotometers, gamma ray spectrometer, pXRF, pXRD, pLIBS, and µRaman spectrometer have changed this scenario completely and increased their on-site applications in mineral exploration studies. These instruments are currently providing direct, rapid, on-site, real-time, non-destructive, cost-effective identification, and determination of target elements, indicator minerals and pathfinder elements in rock, soil, and sediment samples. These portable analytical instruments are currently helping to obtain accurate chemical and mineralogical information directly in field with minimal or no sample preparation, and providing decision-making support during field work as well as during drilling operations in several successful mineral exploration programs. In this article, the developments in these portable devices, and their contributions in the platinum group elements (PGE), rare earth elements (REE), gold, base metals, and lithium exploration studies both on land and on ocean bed have been summarized with examples.

This systematic literature review explores the impact of social media use (SMU) and practices (SMPs) on team feedback (TF) and performance (TP) in construction project management. The study delves into the intricate dynamics between SMU and SMPs and their influence on communication, collaboration, and stakeholder engagement within construction projects. It investigates how these digital practices reshape the traditional methods of team interaction, feedback mechanisms, and overall team performance in the complex and multifaceted environment of construction sites. The review aims to provide a comprehensive understanding of the role of social media in modern construction project management, highlighting its significance in enhancing team communication, coordination, and performance. This research is crucial for understanding the evolving landscape of construction management, where digital tools and platforms are increasingly integral to successful project outcomes. The findings are expected to offer valuable insights for professionals in the construction industry, helping them leverage social media effectively for improved project management and team collaboration.

(1) Background: This work aimed to conduct the first comparative study providing long-term data about patient reported outcome measures as well as donor-site scar assessment and aesthetic evaluation of the reconstructed breasts in patients with DIEP versus PAP flap breast reconstruction. (2) Methods: This prospective, single-center, matched cohort study included a total of 36 patients after DIEP and PAP flap breast reconstruction. Evaluation was done using the Breast-Q and POSAS questionnaire as well as the Breast Aesthetic Scale for cosmetic analysis by four plastic surgeons. (3) Results: Post-operative Breast-Q evaluation revealed no significant differences between both patient groups for the categories physical well-being donor-site, physical well-being breast and satisfaction with the breast. Scar evaluation of the donor-site region showed equivalent results for the thigh and the abdomen concerning the overall opinion of patients and observers. There was no significant difference between both methods of reconstruction for all aspects of breast aesthetics. (4) Conclusions: Similar results of donor-site morbidity, scar quality and aesthetic outcome of the breast in both the DIEP and PAP patient group have been demonstrated. Hence, in cases suitable for both types of reconstruction, the decision can be based on factors such as patients’ lifestyle, leisure activities and preferences.

Livestock management is challenging for resource-poor (R-P) farmers due to unavailability of quality feed, limited professional advice and rumor-spreading about animal health condition in a herd. This research seeks to improve animal health in southern Africa by promoting sericea lespedeza (Lespedeza cuneata), a nutraceutical fodder legume. An automated geospatial model for precision agriculture (PA) can identify suitable locations for its cultivation. Additionally, a novel approach of radio frequency identifier (RFID) supported telemetry technology can track animal movement, and the analyses of data using artificial intelligence can determine sickness of small ruminants. This RFID-based system is being connected to a smartphone app (under construction) to alert farmers of potential livestock health issues in real-time so they can take immediate corrective measures. An accompanying Decision Support System (DSS) site is being developed for R-P farmers to obtain all possible support on livestock production, including the designed PA and RFID-based DSS.

Highly pathogenic (HP) avian influenza viruses (AIVs) are naturally restricted to H5 and H7 subtypes with a polybasic cleavage site (CS) in the hemagglutinin (HA) and any AIV with an intravenous pathogenicity index (IVPI) ≥1.2. Only few non-H5/H7 viruses fulfill the criteria of HPAIVs; nevertheless, it remains unknown why these viruses did not spread in domestic birds. In 2012, a unique H4N2 virus with a polybasic CS 322PEKRRTR/G329 was isolated from quails in California which, however, was avirulent in chickens. This is the only known non-H5/H7 virus with four basic amino acids in the HACS. Here, we investigated the virulence of this virus in chickens after expansion of the polybasic CS by substitution of T327R (322PEKRRRR/G329) or T327K (322PEKRRKR/G329) with or without reassortment with HPAIVs H5N1 and H7N7. The impact of single mutations or reassortment on virus fitness in vitro and in vivo was studied. Efficient cell culture replication of T327R/K carrying H4N2 viruses increased by trypsin, particularly in MDCK cells, and reassortment with HPAIV H5N1. Likewise, replication, virus excretion and bird-to-bird transmission of H4N2 was remarkably compromised by the CS mutations, but restored after reassortment with HPAIV H5N1, although not with HPAIV H7N7. Viruses carrying the H4-HA with or without R327 or K327 mutations and the other gene segments from HPAIV H5N1 exhibited high virulence and efficient transmission in chickens. Together, increasing the number of basic amino acids in the H4N2 HACS was detrimental for viral fitness particularly in vivo but compensated by reassortment with HPAIV H5N1. This may explain the absence of non-H5/H7 HPAIVs in poultry.

A separate group consists of compounds that are able to simultaneously interact with both orthosteric and allosteric sites, which are classified as bitopic GPCR ligands [74, 76-81]. They have two pharmacophores, one of which binds with high affinity to the orthosteric site, while the other, with lower affinity, binds to the allosteric site. If these sites are spatially separated in the receptor, then the pharmacophores in the bitopic ligand must be connected with a flexible linker, the length of which exactly corresponds to the distance between the orthosteric and allosteric sites. At the same time, it is important that the linker does not significantly affect the conformational rearrangements in the receptor caused by its activation by orthosteric and (or) allosteric agonists [74, 79].

Health services research is a multidisciplinary discipline that aims to improve population health by studying healthcare services' organization, delivery, and financing. Over time, the field has worked to define its boundaries and establish a set of core research topics and methods addressing population wellbeing, access, quality, and cost. Although the influence of health technology is significant, our literature survey on health services research showed that SCs in general—containing their management, cost, and policy—had received little attention. Importantly, our assessment also showed that the system’s readiness to handle supply policy and supply device deficiencies like those encountered during pandemic was hardly ever mentioned. Reduced open areas and water bodies, deteriorating infrastructure, and changes in the biological morphology all affect cities’ uncontrollable and unplanned growth. Urban amenities, facilities, and healthcare services were unevenly distributed due to this unchecked urban population development. In light of this, this research suggests two reliable models for site selection issues for one of Hong Kong’s main hospitals. Levels of uncertainty, infeasibility tolerance, and reliability are taken into consideration. Then, two categories of uncertainty—symmetric and bound-ed—were examined. As a result, the challenge of scheduling in uncertainty has been considered, and potential solutions have been presented using a specified probability distribution function. The paper concludes by introducing the specific justice and health problems and outlining four typical strategies. In order to ensure that medications and other healthcare supplies are produced, distributed, and given to patients, a vast network of systems, components, and procedures must be effectively managed. This research contributes in this regard. Also, its grantee fairness in health systems and the populations health locally, nationally, and globally. It highlights health inequity, advances the measurement of health inequity, and promotes public dialogues on health inequity.